david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
main
mibs/MIBS/cambium/cnmatrix/ARICENT-CFA-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

3700 lines
150 KiB
Plaintext
Raw Permalink Blame History

-- Copyright (C) 2006-2012 Aricent Group . All Rights Reserved
ARICENT-CFA-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32,Counter64,
enterprises, IpAddress, Unsigned32,
Integer32, NOTIFICATION-TYPE, TimeTicks FROM SNMPv2-SMI
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
ifIndex,InterfaceIndex,ifEntry,ifType FROM IF-MIB
VlanId,PortList FROM Q-BRIDGE-MIB
TruthValue, MacAddress, RowStatus,
TimeStamp, DisplayString, StorageType FROM SNMPv2-TC;
-- futuresoftware OBJECT IDENTIFIER ::= { enterprises 2076 }
fscfa MODULE-IDENTITY
LAST-UPDATED "202106110000Z"
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
CONTACT-INFO "support@aricent.com"
DESCRIPTION
" The MIB module for CFA. "
REVISION "202106110000Z"
DESCRIPTION
"Cambium update: added read-only ifMainPrevDesc
object to export the previous description for an
interface."
REVISION "202005240000Z"
DESCRIPTION
"Cambium update: added read-only ifMainName
object to export interface name data that is
used to configure various tables by the
management applications."
REVISION "201908260000Z"
DESCRIPTION
"Cambium update: added ifMainNeighborId to
support per-interface condensed neighbor
identification. Defined the ifVlanIpTable
to support short-cut interface creation and
IP address configuration."
REVISION "201209050000Z"
DESCRIPTION
"The revised version of the MIB for CFA
release 1.1.0.0. "
REVISION "199912171330Z"
DESCRIPTION
"The first version of the MIB for CFA
release 1.0.0.0. "
::= { enterprises futuresoftware (2076) 27 }
if OBJECT IDENTIFIER ::= { fscfa 1 }
ff OBJECT IDENTIFIER ::= { fscfa 2 }
fm OBJECT IDENTIFIER ::= { fscfa 3 }
traps OBJECT IDENTIFIER ::= { fscfa 4 }
pa OBJECT IDENTIFIER ::= { fscfa 5 }
-- Cfa If Group
-- This group defines objects for Interface Management.
ifMaxInterfaces OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Specifies the maximum number of interfaces that can
be present in the system."
::= { if 1 }
ifMaxPhysInterfaces OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Specifies the maximum number of physical interfaces
that can be present in the system."
::= { if 2 }
ifAvailableIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows an ifIndex which is available for creation of
any new virtual (non-physical) interface in the system.
This ifIndex value can be used for creation of interfaces
in the ifMainTable or any media-specif MIB. For creation
of physical interfaces, any free ifIndex between 1 and
ifMaxPhysInterfaces can be used."
::= { if 3 }
-- ifMainTable
-- This table is used for the management of all the interfaces in the
-- system.
ifMainTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfMainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all the interface entries in the system.
This table contains objects which are applicable to all
types of interfaces in the system. This table is a
proprietary extension to the standard ifTable and
ifXTable. The index to this table has the semantics of
the MIB-2 ifIndex."
::= { if 4 }
ifMainEntry OBJECT-TYPE
SYNTAX IfMainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable
to a particular interface."
INDEX { ifMainIndex }
::= { ifMainTable 1 }
IfMainEntry ::=
SEQUENCE {
ifMainIndex InterfaceIndex,
ifMainType INTEGER,
ifMainMtu Integer32,
ifMainAdminStatus INTEGER,
ifMainOperStatus INTEGER,
ifMainEncapType INTEGER,
ifMainBrgPortType INTEGER,
ifMainRowStatus RowStatus,
ifMainSubType INTEGER,
ifMainNetworkType INTEGER,
ifMainWanType INTEGER,
ifMainDesc DisplayString,
ifMainStorageType StorageType,
ifMainExtSubType INTEGER,
ifMainPortRole INTEGER,
ifMainUfdOperStatus INTEGER,
ifMainUfdGroupId Integer32,
ifMainUfdDownlinkDisabledCount Counter32,
ifMainUfdDownlinkEnabledCount Counter32,
ifMainDesigUplinkStatus TruthValue,
ifMainEncapDot1qVlanId Integer32,
ifMainNeighborId SnmpAdminString,
ifMainName SnmpAdminString,
ifMainPrevDesc DisplayString
}
ifMainIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable."
::= { ifMainEntry 1 }
ifMainType OBJECT-TYPE
SYNTAX INTEGER {
rfc877x25(5), -- X.25
ethernetCsmacd(6), -- Ethernet/802.3
iso88025TokenRing(9), -- Token Ring
ppp(23), -- PPP link
softwareLoopback(24), -- Loopback Interface
frameRelay(32), -- Frame Relay DTE port
miox25(38), -- multiprotocol over x.25
-- used for X.25 VCs
aal5(49), -- AAL5 over ATM
propVirtual (53), -- Proprietary Virtual Interface
async(84), -- ASYNC
frameRelayMPI(92), -- multiprotocol
-- over FR
-- used for FR VCs
-- and sub-interfaces
pppMultilinkBundle(108), -- PPP Multilink
-- Bundle
ipOverAtm(114), -- IPoA virtual
hdlc(118), -- HDLC port
tunnel(131), -- Encapsulation interface
atmSubInterface(134), -- VCs under IPoA
l3ipvlan(136), -- Layer3 VLAN interface
mplsTunnel (150), -- MPLS Tunnel Virtual Interface
ieee8023ad(161), -- Link Aggregation Mib
mpls (166), -- MPLS
teLink (200), -- TE Link Interface
brgPort(209), -- Bridge port used for creating virtual
-- ports in PBB and EVB
ifPwType (246), -- Pseudowire interface type
ilan(247), -- Internal-lan
pip (248) -- Virtual (Internal) Provider Instance port
} -- These are the currently supported
-- interfaces. More can be added at a
-- later time.
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type/protocol of interface. Specification of
the object is mandatory for all interfaces. This
value should be specified after the row creation
in the ifMainTable and before setting any other
object in this table. Once the type is specified,
it cannot be changed - the interface should be
deleted for changing the type of the interface.
The ethernetCsmacd(6), iso88025TokenRing(9), aal5(49),
async(84) and hdlc(118) are physical interfaces while
all other types are virtual or logical interfaces.
Specific ifIndex ranges are reserved for different interface types.
Creation of different types of interfaces is possible only within
their corresponding ifIndex range. So the ifMainType should be
configured corresponding to the ifIndex range reserved for that
particular interface type.
For creation of physical interface types, it is mandatory to
specify the handle to the device driver using the ifAlias
object of the standard ifXTable before specifying the type.
This handle could be something like eth1 or /dev/abcd.
pip interface type will be used vritual Provider Instance port in
PBB bridge mode. physical PIPs can be created using ethernetCsmacd .
Following is the mapping of different port types and there ifmaintype values.
External ports
--------------
Port: ifmaintype Port type
-------------------------------------------------------------------
CNP- Ctagged 6 - customerNetworkPortCtagged (9)
CNP - Port based 6 - customerNetworkPortPortBased (2)
CNP- Stagged 6 - customerNetworkPortStagged (3)
PNP 6 - providerNetworkPort (1)
PIP 6 - providerInstancePort (11)
CBP 6 - customerBackbonePort (12)
UAP 6 - uplinkAccessPort (13)
Internal ports
--------------
VIP 209 - virtualInstancePort (10)
PIP 248 - providerInstancePort (11)
CBP 209 - customerBackbonePort (12)
SBP 209 - stationFacingBridgePort (14)
brgPort will be used to create virtual PBB ports other than PIPs.
(ie) brgPort is used to create logical ports VIPs, CBPs and SBPs.
The propVirtual type denotes properietary logical interfaces. These
type of interfaces can be associated with a {physical interface,
switch instance} for the purpose of sharing the physical interface
to more than one context and thus realising Switch Instance Sharing
of a physical interface."
::= { ifMainEntry 2 }
ifMainMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MTU for the interface as shown to the higher
interface sub-layer (this value should not include
the encapsulation or header added by the interface).
If IP is operating over the interface, then this
value indicates the IP MTU over this interface.
For changing the MTU of any interface, the interface
must be brought down first - changing MTU while the
interface is administratively up is not permitted.
If not specified during interface creation, a default
value is assigned based on the ifMainType given to
the particular interface.
While configuring for logical VLAN interfaces, care
should be taken to, configure this value as the
lowest of the MTU values of the member ports."
::= { ifMainEntry 3 }
ifMainAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3), -- in some test mode
loopback(4) --loopback mode
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state of the interface. This object
can be set only when the ifMainRowStatus of the
interface is active. This object has the semantics
of the ifAdminStatus of the standard ifTable.
The testing(3) state indicates that no operational
packets can be passed - this state is not currently
supported.
When a managed system initializes, all
interfaces start with ifMainAdminStatus in the
down(2) state, it's a default state also. As a result
of either explicit management action or per
configuration information retained by the managed
system, ifMainAdminStatus is then changed to
the up (1) state (or remains in the
down(2) state)."
DEFVAL { down }
::= { ifMainEntry 4 }
ifMainOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3), -- in some test mode
unknown(4), -- status can not be
-- determined for
-- some reason.
dormant(5),
notPresent(6), -- some component is
-- missing
lowerLayerDown(7) -- down due to state
-- of lower-layer
-- interface(s).
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface.
The testing (3) state indicates that no operational
packets can be passed - this state is not supported
currently.
If ifMainAdminStatus is down (2)
then ifMainOperStatus would be down (2). If
ifMainAdminStatus is changed to up (1) then
ifMainOperStatus should change to up (1) if the
interface is ready to transmit and receive
work traffic; it should change to dormant (5)
the interface is waiting for external actions
(such as a serial line waiting for an incoming
connection); it should change to lowerLayerDown(7)
state if it cannot be made up as the interface sub-layer
below it is down; it should remain in the down (2) state
if and only if there is a fault that prevents it
from going to the up (1) state; it should remain in
the notPresent (6) state if the interface has
missing (typically, hardware) components.
The status unknown(4) is shown when it is not possible
to determine the exact status of the interface - e.g.
the interface sub-layer is performing negotiations -
during this period the interface is not up but at the
same time, it is not a fault condition and hence it
cannot be shown as down - in such periods the status
is shown as unknown.
This object has the semantics of the ifOperStatus of the
standard ifTable."
::= { ifMainEntry 5 }
ifMainEncapType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
nlpid(2), -- NLPID based encap
-- in the case of FR
-- and multiplexed
-- NLPID encap for X.25
nlpidSnap(3), -- NLPID-SNAP based
-- encap in the case
-- of FR and multiplexed
-- NLPID-SNAP encap for
-- X.25.
cudNlpid(4), -- dedicated NLPID for
-- X.25 only
cudNlpidSnap(5), -- dedicated
-- NLPID-SNAP for
-- X.25 only
llcSnap(6), -- for ATM VCs only
vcMultiplexed(7), -- for ATM VCs only
ethernetV2(8) -- for Ethernet interfaces
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The encapsulation type to be used over the interface.
For Ethernet interfaces, the default encapsulation
type is ethernetV2(8). The other possible encapsulation
is llcSnap(6). If other(1) is specified then an
automatic encapsulation type learning method is used
in ARP for determining the encapsulation for unicast
destinations while the multicast and broadcast destinations
use ethernetV2(8).
For PPP and MLPPP interfaces, the encapsulation type can
only be other(1) and this is the default value.
For FR VCs, the value can be nlpid(2) (for carrying protocols
which have NLPID) or nlpidSnap(3) (for other protocols). The
default is nlpid(2) and the types of protocols supported are
inferred from the stack-layering implemented over the
interface.
For X.25 VCs, the value can be nlpid(2) or nlpidSnap(3)
(where the VC can carry multiplexed protocol traffic with
each data packet containing the NLPID or SNAP header) or
cudNlpid(4) or cudNlpidSnap(5) (where the CUD specifies
the NLPID of the protocol or SNAP and the data packets do
not contain these headers - for dedicated VCs). The default
is cudNlpid(4).
For ATM VCs, the default is llcSnap(6) but the
vcMultiplexed(7) encapsulation is also supported.
This object is not applicable to other interfaces."
::= { ifMainEntry 6 }
ifMainBrgPortType OBJECT-TYPE
SYNTAX INTEGER {
providerNetworkPort (1),
customerNetworkPortPortBased (2),
customerNetworkPortStagged (3),
customerEdgePort (4),
propCustomerEdgePort (5),
propCustomerNetworkPort (6),
propProviderNetworkPort (7),
customerBridgePort (8),
customerNetworkPortCtagged (9),
virtualInstancePort (10),
providerInstancePort (11),
customerBackbonePort (12),
uplinkAccessPort (13),
stationFacingBridgePort (14)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Bridge port type of this specified switch port.
Bridge Port type can be specified only for switch ports and not for
router ports, IVR interfaces and I-LAN Interfaces.
providerNetworkPort - Port Connected to a single Provider.
SVLAN Classification is based on only the PVID configured for the
port for untagged packets.
customerNetworkPortPortBased - Port in the S-VLAN component that
can transmit or received frames for single customer.
All packets received on this port, are mapped to one single service
instance identified by the PVID of that Port.
Acceptable Port Type will be always Admit only Untagged or Priority
Tagged Frames on this port.
customerNetworkPortStagged - Port in the S-VLAN component that
can transmit or received frames for single customer.
VLAN classification on this interface will be based on the S-tag
received or on the PVID of the port. Ingress Filtering will be
always enabled on this port.
customerEdgePort - Port in a Provider Edge Bridge connected to a
single customer. Multiple services can be provide on this port.
The Packets received on this interface will be first classified
to a CVLAN. CVLAN classification can be based on the Vid
in the C-Tag present in the packet (if it C-tagged packet) or from
the pvid of the port. Service instance selection (S-VLAN selection)
for a frame is done based on the entry present in the C-VID
registration table for the pair (C-VID, reception Port).
CustomerEdgePort configuration is allowed only in Provider Edge
Bridges.
propCustomerEdgePort - Port connected to a single customer, where
multiple services can be provided based on only Proprietary SVLAN
classification tables. S-VLAN classification will not happen based on
C-VID registration table on this port. propCustomerEdgePort
configuration is allowed only in Provider Edge Bridges.
propCustomerNetworkPort - Port connected to a single customer, where
multiple service can be provided based on CVLANs by assigning one of
the Proprietary SVLAN classification tables to this port. The
services can also be assigned using other proprietary SVLAN
classification tables where CVLAN is not the index of the table.
propProviderNetworkPort - Port connected to a Q-in-Q Bridge located
inside Provider Network. This port is part of S-VLAN component.
If packets to be tagged and sent out of this port will have 0x8100
as the ether type. Similarly pakcets with standard Q tag (ether type
as 0x8100) received will be considered as S-Tagged packets.
customerBridgePort - Type of the port to be used in customer
bridges as well in Provider(Q-in-Q) bridges. This type is not valid
in Provider Core bridges as well as Provider Edge bridge.
customerNetworkPortCtagged - Port in the I component that
can transmit or received frames for single customer.
VLAN classification on this interface will be based on the C-tag
received or on the default CVID of the port. Ingress Filtering will be
always enabled on this port.
virtualInstancePort - A Bridge Port on an I-component in a Backbone Edge Bridge
that provides access to a single backbone service instance.
providerInstancePort - The set of Virtual Instance Ports that are supported
by a single instance of the ISS.
customerBackbonePort - A Backbone Edge Bridge Port that can receive and transmit
I-tagged frames for multiple customers, and assign B-VIDs and translate I-SID on
the basis of the received I-SID.
Edge Virtual Briding (EVB) technology is used in Data Center Networks.
The uplinkAccessPort (UAP) and stationFacingBridgePort (SBP) types are
applicable when the bridge operates in EVB environment.
uplinkAccessPort - A port on a Port-mapping S-VLAN component that
connects an EVB Bridge with an EVB Station.
stationFacingBridgePort - A port that is part of the C-VLAN component of
EVB Bridge which has one-to-one relationship with a S-Channel Access Port
in the port-mapping S-VLAN component.
In Customer bridges and in Provider Bridges only customerPort option
is allowed.
In Provider backbone bridge only customerNetworkPort, providerNetworkPort
and customerBackbonePort type of ports are allowed.
Bridge Port Type cannot be set for a port-channel port, if some
physical ports are aggregated in it.
Also Bridge Port type cannot be set for a port, if part of a
port-channel.
Whenever the Bridge port type changes, the previous configuration
associated with the port will be flushed.
For example.
whenever CNP(STagged) and PNP port types are changed to any
other port type,
- The unicast entries learnt on this port and
- The VID translation table entries associated with the port
will be flushed.
Whenever CEP port type is changed to any other port type,
- The unicast entries learnt on this port
- The C-VID registration table entries associated with the port
- The PEP configuration table entries
- The service priority regeneration table entries
will be flushed.
Even the vlan membership of the port will be removed when the
Pbport type is changed."
DEFVAL { 8 }
::= { ifMainEntry 7 }
ifMainRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A RowStatus variable for addition, deletion and in-activation
of the interfaces. Specification of the object is mandatory
for all interfaces.
When the status is active, the interface is created and
ready to use in the respective protocol modules.
When the status is notInService, the interface has not been
registered with the respective protocol modules and as such
those modules are not aware of the existence of the interface
- creation is hence, incomplete. Setting an active interface
to notInService results in de-registration/deletion of the
interface from the respective protocol modules and all the
configurations associated with that interface in those modules
may be lost.
Deletion of an interface, may affect the status of other
interfaces which are layered above or below it in the Interface
Stack (ifStackTable) and may result in other interfaces being
made notReady or notInService."
::= { ifMainEntry 8 }
ifMainSubType OBJECT-TYPE
SYNTAX INTEGER {
extremeEther(251),
fastEther(252),
gigabitEthernet(253),
xlEthernet(254),
notApplicable(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object stores the subType value of the specified interface.
Configuration of this object is not mandatory.By default
Sub type value will be updated based on the hardware link speed.
For non Ethernet interfaces, the object defaults to notApplicable.
notApplicable is valid only for non Ethernet interfaces."
::= { ifMainEntry 9 }
ifMainNetworkType OBJECT-TYPE
SYNTAX INTEGER {
lan(1),
wan(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether this interface is a
WAN or LAN link.
The default value for this object varies according
to the interface type. All interfaces of type radio (71),
ieee8023ad (161) and l3ipvlan (136) are LAN interfaces.
Fast ethernet interfaces are considered LAN interfaces
while Gigabit ethernet interfaces are considered WAN
interfaces at start-up.
Interfaces of any other type are WAN interfaces.
This object can be set only for ethernet interfaces or
l3ipvlan. For changing the network type of an ethernet
interface or l3ipvlan, the interface must be brought
down first - changing network type while the interface
is administratively up is not permitted."
::= { ifMainEntry 10 }
ifMainWanType OBJECT-TYPE
SYNTAX INTEGER {
other(0),
private(1),
public(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether this interface is a
private or public WAN link.
This object is applicable only for PPP interfaces and
ethernet WAN interfaces. For other interfaces the value
cannot be set and a get always returns the value OTHER.
For PPP and ethernet WAN interfaces the default value is PUBLIC.
By default, public WAN links, have a default route associated
with them. When the WAN type is set as PRIVATE, no default route
is created for this interface. The value OTHER can never be set.
For changing the type of a WAN interface, the interface
must be brought down first - changing WAN type while the
interface is administratively up is not permitted."
::= { ifMainEntry 11 }
ifMainDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A textual string which contains the description about an interface."
::= { ifMainEntry 12 }
ifMainStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row in the ifMainTable.
Conceptual rows having the value 'permanent' need not allow
write-access to any columnar object in the row.
only volatile and nonVolatile are allowed for this object"
DEFVAL { nonVolatile }
::= { ifMainEntry 13 }
ifMainExtSubType OBJECT-TYPE
SYNTAX INTEGER {
sisp(0),
attachmentCircuit(1),
openflow(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object stores the subType value of the specified interface.
These sub types are specified for the ifMainType-propVirtual."
::= { ifMainEntry 14 }
ifMainPortRole OBJECT-TYPE
SYNTAX INTEGER {
uplink(1),
downlink(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is for indicating the port role for each interface.
A port is termed as uplink port when it is connected to the
network.
A port is termed as downlink when it is connected towards host
end-points"
DEFVAL { downlink }
::= { ifMainEntry 15 }
ifMainUfdOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
ufdErrorDisabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is for indicating the Uplink Failure Detection(UFD)
port operational status for each interface.
Uplink Failure Detection(UFD) operational status of the uplink
port is same as the operational status of the port.
For the downlink ports this object takes a value which is
dependent on the combined operational status of the uplink ports
present in the group to which this port belongs to.
If all the uplink ports in the Uplink Failure Detection(UFD) group
are down, the operational status of all the active downlink ports
is ufdErrorDisabled and the operational status of
all the inactive downlink ports is Down.
When the interface is not in the group and it's ifMainOperStatus
is up, the interface Uplink Failure Detection(UFD) operational
status is up.
When the interface is not in the group and it's ifMainOperStatus
is not up, the port Uplink Failure Detection(UFD) operational
status is down."
::= { ifMainEntry 16 }
ifMainUfdGroupId OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An identifier that uniquely identifies the group. Each group has
uplink interfaces to monitor and downlink interfaces to disable.
The UFD group Id value zero indicates that the port is not
present in any group. By setting the UFD Group Id value to zero,
we are deleting the port from the ufd group to which it belongs to."
::= { ifMainEntry 17 }
ifMainUfdDownlinkDisabledCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A counter which indicates the number of times
that downlink ports in the group were automatically
disabled because of all uplink ports failure in the group."
::= { ifMainEntry 18 }
ifMainUfdDownlinkEnabledCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A counter which indicates the number of times
that downlink ports in the group were automatically
enabled because of any one uplink ports back to function in the group."
::= { ifMainEntry 19 }
ifMainDesigUplinkStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether this interface is designated uplink
or not.
A port is termed as designated uplink when the port is connected
to the network and it has more preference over all the uplink
ports. Broadcast/unknown multicast will use this designated
port to reach uplink.
When the status is set to True, the port acts as designated uplink.
This designated uplink port is used in split horizon feature.
This object is different from the Uplink Failure Detection (UFD)
designated uplink port object called ifUfdGroupDesigUplinkPort.
Where ifUfdGroupDesigUplinkPort is unique per UFD group and in
each group the designated uplink port differs in UFD whereas
this object is specific for all the available physical interfaces.
This configuration is allowed only on uplink port which is
configured through ifMainPortRole.
Configuring any uplink port as designated uplink port overrides the
previous designated uplink port configuration since it is allowed
to have only one designated uplink port in the system."
DEFVAL { false }
::= { ifMainEntry 20 }
ifMainEncapDot1qVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the VLAN identifier assigned to Layer 3
Subinterface for association in the porting layer. This object
is available only when the interface is set as Layer3 SubInterface."
DEFVAL { 0 }
::= { ifMainEntry 21 }
ifMainNeighborId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string identifying the device connected to the interface.
The neighbor ID is derived from LLDP data that is currently
associated with the interface."
DEFVAL { "" }
::= { ifMainEntry 22}
ifMainName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string identifying the device interface that can
be used to unambiguously identify the interface when
configuring interface settings in various tables
that identify ports by name."
DEFVAL { "" }
::= { ifMainEntry 23}
ifMainPrevDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string which contains the previous
description for the interface."
DEFVAL { "" }
::= { ifMainEntry 24}
-- ifIpTable
-- This table is used for the management of the interfaces in the
-- system which are registered with IP.
ifIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all the interface entries in the system which
are registered with IP.
This table contains objects which are applicable for the
management of IP over the network interfaces
in the system.
This table is a extension to the ifMainTable.
The index to this table has the semantics of
the ifMainIndex of the ifMainTable.
Entries are created automatically in this table for
any interface sub-layer which is layer below IP using
the ifStackTable. Similarly, entries are deleted from
this table when the interface's layering below IP is
removed."
::= { if 5 }
ifIpEntry OBJECT-TYPE
SYNTAX IfIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable
to a particular interface over which IP is operating."
INDEX { ifMainIndex }
::= { ifIpTable 1 }
IfIpEntry ::=
SEQUENCE {
ifIpAddrAllocMethod INTEGER,
ifIpAddr IpAddress,
ifIpSubnetMask IpAddress,
ifIpBroadcastAddr IpAddress,
ifIpForwardingEnable TruthValue,
ifIpAddrAllocProtocol INTEGER,
ifIpDestMacAddress MacAddress,
ifIpUnnumAssocIPIf InterfaceIndex,
ifIpIntfStatsEnable TruthValue,
ifIpPortVlanId Integer32
}
ifIpAddrAllocMethod OBJECT-TYPE
SYNTAX INTEGER {
manual(1), -- To be set by Manager
negotiation(2), -- obtained from peer
dynamic(3),
none(4) -- none of the above
} -- Currently only
-- these method possible.
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mechanism to be used for allocation of IP
address for this interface.
The value negotiation can be used only for PPP
and MLPPP interfaces which support obtaining of
IP addresses through negotiation.
The dynamic(3) option takes an IP
address dynamically from the available
server (dhcp/bootp/rarp) according to the
protocol specified in ifIpAddrAllocProtocol.
If the method specified is manual and the IP
address is not provided (then the interface
would be treated as a un-numbered interface."
DEFVAL { none }
::= { ifIpEntry 1 }
ifIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP address given to this
interface. The specification of this object is
mandatory for all network interfaces (Ethernet,
FR VC, IPoA interface, PPP link - not under MP,
MP interface and X.25 VC). If the interface is
not a network interface then the default value
of 0.0.0.0 is assigned and the interface is
treated as a un-numbered interface by IP."
DEFVAL { '00000000'H }
::= { ifIpEntry 2 }
ifIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP Subnet Mask for this
interface. The value should be specified only
for network interfaces and any valid VLSM is
accepted.
If not specified, this object takes the default
subnet mask value based on the class of the IP
address configured for the interface."
::= { ifIpEntry 3 }
ifIpBroadcastAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP broadcast address for this
interface. The value should be specified only
for network interfaces and any valid broadcast
address based on a valid VLSM is accepted.
If not specified, this object takes the default
value based on the class of the IP
address configured for the interface."
::= { ifIpEntry 4 }
ifIpForwardingEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether IP forwarding is enable on
this interface. Disabling IP forwarding on an
interface will result in packets which are to
be forwarded on that interface being dropped
and ICMP error messages being generated for the
packets."
DEFVAL { true }
::= { ifIpEntry 5 }
ifIpAddrAllocProtocol OBJECT-TYPE
SYNTAX INTEGER {
rarp(1),
dhcp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the protocol to be used to obtain
IP address for this interface. This object is
valid only when ifIpAddrAllocMethod is set to
dynamic (3).
When ifIpAddrAllocMethod option is dhcp(2)
dhcp-client tries for dynamic IP address from
server for maximum number of retries. If couldn't
able to receive any IP address, then sets back to
default IP address.
Currently rarp (1) option is not
supported. The assigned value will be effective
only when the interface admin status changes"
DEFVAL { dhcp }
::= { ifIpEntry 6 }
ifIpDestMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The unicast Peer MacAddress for unnumbered interface.
This Object needs to be configured mandatorily for proper
forwarding of IP packets over unnumbered interfaces.This object
needs to be set to avoid ARP resolution failure on corresponding
interfaces. For MPLS-TP networks, MacAddress can be unicast or
multicast (01:00:5E:90:00:00) Mac Address."
::= { ifIpEntry 7 }
ifIpUnnumAssocIPIf OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object stores the interface index of the interface associated
with the unnumbered interface. The source IP addresses used over
the Unnumbered interface in relation to the destination IP address
are borrowed from the associated interface."
::= { ifIpEntry 8 }
ifIpIntfStatsEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether statistics collection is enabled on the IP
interface.
When the status is set to True, statistics collection will be started on the IP interface.
Retrieval of statistics on the L3 interface is possible only when the status is
set to True.
When the status is set to False, statistics collection will be stopped on the IP interface.
Retrieval of statistics on the L3 interface is not be possible when the status is
set to False."
DEFVAL { false }
::= { ifIpEntry 9 }
ifIpPortVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the VLAN identifier assigned to router-ports
for association in the porting layer. This object is meant for the
chipsets when the porting layer demands VLAN identifier association
to realize router ports. This object is available only when the
physical interface is set as router-port.
The default value 0 is applicable for L3 VLAN interfaces and for
chipsets that do not support this MIB feature"
DEFVAL { 0 }
::= { ifIpEntry 10 }
-- ifWanTable
-- This table is used for specification of media specific configuration
-- parameters which are applicable to WAN interfaces.
ifWanTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfWanEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A list of all the WAN interfaces in the system.
This table contains objects which are applicable for the
management of WAN interfaces like PPP, MP bundle and
FR/X.25/ATM VCs in the system.
This table is a extension to the ifMainTable.
The index to this table has the semantics of
the ifMainIndex of the ifMainTable.
Entries are created automatically in this table when
any WAN interface is created in the ifMainTable. The
ppp(23), miox25(38), frameRelayMPI(92),
pppMultilinkBundle(108) and atmSubInterface(134)
interfaces have entries in this table. The entries
in this table are deleted when the interfaces are
deleted from the ifMainTable."
::= { if 6 }
ifWanEntry OBJECT-TYPE
SYNTAX IfWanEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry containing management information applicable
to a WAN interface."
INDEX { ifMainIndex }
::= { ifWanTable 1 }
IfWanEntry ::=
SEQUENCE {
ifWanInterfaceType INTEGER,
ifWanConnectionType INTEGER,
ifWanVirtualPathId Integer32,
ifWanVirtualCircuitId Integer32,
ifWanPeerMediaAddress OCTET STRING,
ifWanSustainedSpeed Integer32,
ifWanPeakSpeed Integer32,
ifWanMaxBurstSize Integer32,
ifWanIpQosProfileIndex Integer32,
ifWanIdleTimeout Integer32,
ifWanPeerIpAddr IpAddress,
ifWanRtpHdrComprEnable TruthValue,
ifWanPersistence INTEGER
}
ifWanInterfaceType OBJECT-TYPE
SYNTAX INTEGER {
ppp(23), -- PPP link
miox25(38), -- multiprotocol over x.25
-- used for X.25 VCs
frameRelayMPI(92), -- multiprotocol
-- over FR
-- used for FR VCs
-- and sub-interfaces
pppMultilinkBundle(108), -- PPP Multilink
-- Bundle
atmSubInterface(134) -- VCs under IPoA
-- for QoS purpose
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The type of the WAN interface. This is
same as if MIB-2 ifType and ifMainType."
::= { ifWanEntry 1 }
ifWanConnectionType OBJECT-TYPE
SYNTAX INTEGER {
other(0),
permanent(1),
switched(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The type of WAN connection. This object
will not be applicable to PPP and MLPPP
interfaces and will have the value other(0).
For all other interfaces the default value
is permanent(1).
It is possible to pre-configure a SVC through
this table. The actual SVC establishment may
take place when there is data to be sent or
through some other system policy."
::= { ifWanEntry 2 }
ifWanVirtualPathId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The VPI for ATM VCs. This object
will not be applicable to other
interfaces and will have the value 0."
DEFVAL { 0 }
::= { ifWanEntry 3 }
ifWanVirtualCircuitId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The VCI for ATM VCs, DLCI for Frame Relay VCs and
the channel identifier for X.25 VCs.
For SVCs this object is read-only, the value will be
assigned after the SVC establishment.
This object will not be applicable to PPP and
MLPPP interfaces and will have the value 0."
DEFVAL { 0 }
::= { ifWanEntry 4 }
ifWanPeerMediaAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..40))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The Media Address of the peer to whom this
connection is to be established.
For ATM VCs this can be in E.164, NSAP or either of these along
with the subaddress. For Frame Relay VCs this is in
E.164 and for X.25 VCs it is in X.121 format.
For SVCs this object is mandatory, for PVCs it is
optional.
This object will not be applicable to PPP and
MLPPP interfaces and will have the value 0."
::= { ifWanEntry 5 }
ifWanSustainedSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The sustained or minimum gauranteed speed of
the interface. This is semantically similar to
the CIR for FR and SCR for ATM. The value to be
assigned is the CIR or SCR as the case may be.
This value is used by IP-QoS.
For PPP links this object should be given the value
of the speed of the lower link. For MP this value
is the sum of the speed of all the lower PPP links.
If the value is not specified then the system default
values are taken based on the type of the interface."
::= { ifWanEntry 6 }
ifWanPeakSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The maximum speed available on the interface.
This is semantically similar to the CIR+EIR for FR
and PCR for ATM. This value is used by IP-QoS.
For PPP links this object should be given the value
of the speed of the lower link. For MP this value
is the sum of the speed of all the lower PPP links.
If the value is not specified then the ifWanSustatinedSpeed
values are taken as the peak speed values."
::= { ifWanEntry 7 }
ifWanMaxBurstSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The maximum burst size in bytes that the interface
can sustain. This is semantically similar to the Bc for FR
and MBS for ATM. This value is used by IP-QoS.
For PPP links this object should be given the value
of the speed of the lower link. For MP this value
is the sum of the speed of all the lower PPP links.
If the value is not specified then the system default
values are taken based on the type of interface."
::= { ifWanEntry 8 }
ifWanIpQosProfileIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The index of an IP-QoS profile which is configured
in the IP-QoS MIB. Assigning the index of the profile
results in instantiation of that profile for the
interface.
This object is optional and may be specified only for
assigning an IP-QoS profile - if not specified then no
profile is applied to this interface - default value
is then the invalid index 0."
DEFVAL { 0 }
::= { ifWanEntry 9 }
ifWanIdleTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The minimum duration (in seconds) to wait before
disconnecting an idle established circuit/interface. (a
default value of 0 where not required) Specification
of the object is optional for all interfaces; if not
specified the system default value is assumed on the basis
of the IfType specified."
DEFVAL { 0 }
::= { ifWanEntry 10 }
ifWanPeerIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The IP address of the peer to whom this interface is
established with. Specification of this value is optional
for all interfaces.
For PPP and MLPPP interfaces, this value if specified
is used during IPCP negotiation for assigning IP address
to the peer. This object stores the configured peer IP
address and this object is not updated with the actual
IP address of the peer.
For other interfaces, this value is either configured
for peers who do not have InARP support or this object
is instantiated after the peer IP address is obtained
after InARP."
DEFVAL { '00000000'H }
::= { ifWanEntry 11 }
ifWanRtpHdrComprEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Enable or disable the RTP header compression on the
WAN interface. This object is writable for only those
interface which are registered with IP. If the RTP
header compression negotiation with the peer fails then
this object is reset to false."
DEFVAL { false }
::= { ifWanEntry 12 }
ifWanPersistence OBJECT-TYPE
SYNTAX INTEGER {
other(1),
demand(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The persistence of the WAN interface in the system.
Demand(2) circuits are pre-configured but are opened only
when there is some data to be sent (these interfaces are
administratively UP, but operationally DORMANT and they are
made UP dynamically whenever there is any data to be sent
over the interface). The demand circuit configuration
continues to persist in the system.
Alll other WAN interface which do not fall under the above
categories are to be configured as other(1) which is the
default value."
DEFVAL { other }
::= { ifWanEntry 13 }
-- ifAutoCktProfileTable
-- This table is used for the specification of the automatic circuit
-- profile for the WAN interface in the system.
ifAutoCktProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfAutoProfileEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A list of all the automatic circuit profiles in the system.
This table contains objects which are useful for configuration
of an automatic circuit profile for a given interface.
The profile specified here is used for the configuration of
all the incoming calls on the specified interface. The new
interfaces are assigned MIB-2 ifIndex upon creation. The
interface is deleted once the circuit is closed."
::= { if 7 }
ifAutoProfileEntry OBJECT-TYPE
SYNTAX IfAutoProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information applicable
to an automatic circuit profile for an interface."
INDEX { ifAutoProfileIfIndex }
::= { ifAutoCktProfileTable 1 }
IfAutoProfileEntry ::=
SEQUENCE {
ifAutoProfileIfIndex InterfaceIndex,
ifAutoProfileIfType INTEGER,
ifAutoProfileIpAddrAllocMethod INTEGER,
ifAutoProfileDefIpSubnetMask IpAddress,
ifAutoProfileDefIpBroadcastAddr IpAddress,
ifAutoProfileIdleTimeout Integer32,
ifAutoProfileEncapType INTEGER,
ifAutoProfileIpQosProfileIndex Integer32,
ifAutoProfileRowStatus RowStatus
}
ifAutoProfileIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The MIB-2 ifIndex of the interface for which
this automatic circuit profile is applicable.
All incoming calls on this interface will be
handled/configured according to this profile."
::= { ifAutoProfileEntry 1 }
ifAutoProfileIfType OBJECT-TYPE
SYNTAX INTEGER {
rfc877x25(5), -- X.25
frameRelay(32), -- Frame Relay DTE port
aal5(49), -- AAL5 over ATM
ipOverAtm(114) -- IPoA virtual
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The type of the WAN interface. This is
same as if MIB-2 ifType and ifMainType."
::= { ifAutoProfileEntry 2 }
ifAutoProfileIpAddrAllocMethod OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- obtained by other
-- means or not required
negotiation(2), -- obtained from peer
localAddressPool(3)
} -- Currently only
-- these method possible.
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The mechanism to be used for allocation of IP
address for this interface.
The value negotiation can be used only if PPP
or MLPPP interfaces are to run over the automatic
circuits.
The localAddressPool(3) option takes an IP
address dynamically from the IP address pool
specified by the ifAutoProfileIpAddrPoolIndex.
If the method specified is other(1) then either
the IP address is not required or is obtained
by some other method."
DEFVAL { other }
::= { ifAutoProfileEntry 3 }
ifAutoProfileDefIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Specifies the default IP Subnet Mask for this
profile. The value should be specified only
for network interfaces and any valid VLSM is
accepted.
If not specified, this object takes the default
subnet mask value based on the class of the IP
address configured for the interface."
::= { ifAutoProfileEntry 4 }
ifAutoProfileDefIpBroadcastAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Specifies the default IP broadcast address for this
interface. Any valid broadcast
address based on a valid VLSM is accepted.
If not specified, this object takes the default
value based on the class of the IP
address configured for the interface."
::= { ifAutoProfileEntry 5 }
ifAutoProfileIdleTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The minimum duration (in seconds) to wait before
disconnecting an idle automatic circuit. Specification
of the object is mandatory."
::= { ifAutoProfileEntry 6 }
ifAutoProfileEncapType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
nlpid(2), -- NLPID based encap
-- in the case of FR
-- and multiplexed
-- NLPID encap for X.25
nlpidSnap(3), -- NLPID-SNAP based
-- encap in the case
-- of FR and multiplexed
-- NLPID-SNAP encap for
-- X.25.
cudNlpid(4), -- dedicated NLPID for
-- X.25 only
cudNlpidSnap(5), -- dedicated
-- NLPID-SNAP for
-- X.25 only
llcSnap(6), -- for ATM VCs only
vcMultiplexed(7) -- for ATM VCs only
}
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The encapsulation type to be used over the automatic
circuit.
For FR interface, the value can be nlpid(2) (for carrying protocols
which have NLPID) or nlpidSnap(3) (for other protocols). The
default is nlpid(2) and the types of protocols supported are
inferred from the stack-layering implemented over the
interface.
For X.25 interface, the value can be nlpid(2) or nlpidSnap(3)
(where the VC can carry multiplexed protocol traffic with
each data packet containing the NLPID or SNAP header) or
cudNlpid(4) or cudNlpidSnap(5) (where the CUD specifies
the NLPID of the protocol or SNAP and the data packets do
not contain these headers - for dedicated VCs). The default
is cudNlpid(4).
For ATM interface, the default is llcSnap(6) but the
vcMultiplexed(7) encapsulation is also supported."
::= { ifAutoProfileEntry 7 }
ifAutoProfileIpQosProfileIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The index of an IP-QoS profile which is configured
in the IP-QoS MIB. Assigning the index of the profile
results in instantiation of that profile for any
automatic circuit which is instantiated based on this
profile (and a corresponding profile is instantiated
in the IP-QoS table also).
This object is optional and may be specified only for
assigning an IP-QoS profile - if not specified then no
profile is applied to this interface - default value
is then the invalid index 0."
DEFVAL { 0 }
::= { ifAutoProfileEntry 8 }
ifAutoProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"A RowStatus object for creation of automatic circuit
profile on a per interface basis.
It is necessary to create the parent FR,X.25 or ATM/IPoA
interface before creating the automatic circuit profile
for that interface.
The profile is deleted once the parent interface is
deleted from the system.
Setting this object to notInService for an active profile
will result in the profile being not applied to any new
automatic circuit, but the existing circuits would not
be affected. Similarly, deleting a profile would not affect
existing circuits which have used that profile."
::= { ifAutoProfileEntry 9 }
-- ifIvrTable
-- This table is used for the Inter VLAN Routing related
-- configurations for each interface such as converting Bridged interfaces
-- to Routed interfaces and vice-versa.
ifIvrTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfIvrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all the interfaces in the system with IVR related
configurations.
This table is an extension to the ifMainTable. The index to
this table has the semantics of the ifMainIndex of the
ifMainTable."
::= { if 8 }
ifIvrEntry OBJECT-TYPE
SYNTAX IfIvrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing IVR-related information applicable
to a interface."
INDEX { ifMainIndex }
::= { ifIvrTable 1 }
IfIvrEntry ::=
SEQUENCE {
ifIvrBridgedIface
TruthValue
}
ifIvrBridgedIface OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if this interface is a Bridged interface
or not.
A value of 'TRUE' indicates that this interface is
a Bridged interface and is capable of performing
bridging of packets through this interface.
A value of 'FALSE' indicates that this
interface is a Routed interface and is capable of
performing routing of packets through this interface."
::= { ifIvrEntry 1 }
-- Added the following two scalars for setting or resetting the VLAN
-- List for the management interface.
ifSetMgmtVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanId values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanId value in that octet.
This is the set of vlans configured by management to associate
with the management interface."
::= { if 9 }
ifResetMgmtVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanId values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanId value in that octet.
This is the set of vlans configured by management to dis-associate
from the management interface.
Get operation is not allowed for this object."
::= { if 10 }
-- ifSecondaryIpAddressTable
-- This table is to configure secondary ip address over the interfaces
-- registered with IP.
ifSecondaryIpAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfSecondaryIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of secondary IP addresses configured over the
interfaces registered with IP.
This table is a extension to the ifMainTable.
The index to this table has the semantics of
the ifMainIndex of the ifMainTable.
Secondary IpAddress configuration should not override the
primary ip address configured for any of the interface
Updation of entries in this table are not allowd when
RowStatus is active"
::= { if 11 }
ifSecondaryIpAddressEntry OBJECT-TYPE
SYNTAX IfSecondaryIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains the information associated with the
secondary(additional) ip address configured to a particular
interface."
INDEX { ifMainIndex , ifSecondaryIpAddress}
::= { ifSecondaryIpAddressTable 1 }
IfSecondaryIpAddressEntry ::=
SEQUENCE {
ifSecondaryIpAddress IpAddress,
ifSecondaryIpSubnetMask IpAddress,
ifSecondaryIpBroadcastAddr IpAddress,
ifSecondaryIpRowStatus RowStatus
}
ifSecondaryIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the Secondary IP address associated with the
interface"
::= {ifSecondaryIpAddressEntry 1 }
ifSecondaryIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP Subnet Mask associted with the
secondary ip address configuration. The value should be
specified only for network interfaces and any valid
VLSM is accepted.
If not specified, this object takes the default
subnet mask value based on the class of the IP
address configured for the interface."
::= { ifSecondaryIpAddressEntry 2 }
ifSecondaryIpBroadcastAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP broadcast address associated with
the configured secondary IP address. The value should be
specified only for network interfaces and any valid
broadcast address based on a valid VLSM is accepted.
If not specified, this object takes the default
value based on the class of the IP
address configured for the interface."
::= { ifSecondaryIpAddressEntry 3 }
ifSecondaryIpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to manage creation and deletion of rows
in this table."
::= { ifSecondaryIpAddressEntry 4 }
-- ----------------------------------------------------------------------------
-- ifMainExtTable
-- This table is used for the additional management of the interfaces in the
-- system.
-- ----------------------------------------------------------------------------
ifMainExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfMainExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is an extension to the ifMainTable."
::= { if 12 }
ifMainExtEntry OBJECT-TYPE
SYNTAX IfMainExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing additional management information
applicable to a particular interface."
AUGMENTS { ifMainEntry }
::= { ifMainExtTable 1 }
IfMainExtEntry ::=
SEQUENCE {
ifMainExtMacAddress MacAddress,
ifMainExtSysSpecificPortID Unsigned32,
ifMainExtInterfaceType INTEGER,
ifMainExtPortSecState INTEGER,
ifMainExtInPkts Counter32,
ifMainExtLinkUpEnabledStatus INTEGER,
ifMainExtLinkUpDelayTimer Unsigned32,
ifMainExtLinkUpRemainingTime Unsigned32
}
ifMainExtMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The unicast MacAddress for each interface.
The Macaddress can be set only when ifMainAdminStatus for the
interface is down(2). The object is valid only for
interfaces that have the ifMainType set as ethernetCsmacd(6) or
ieee8023ad(161).
Configuration of this object is not mandatory. If this object is
not configured, the default Macaddress for the interface is obtained
from the system."
::= { ifMainExtEntry 8 }
ifMainExtSysSpecificPortID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"System specific index configured for the port.
It provides a different numbering space other than the
IfIndex to identify ports.
Valid range for this object is from 1 to 16384.
The value 0 is not allowed to be set. On reading the object
0 is returned only if no other value has been configured."
DEFVAL { 0 }
::= { ifMainExtEntry 9 }
ifMainExtInterfaceType OBJECT-TYPE
SYNTAX INTEGER {
frontpanelport (1),
backplaneport (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object reflects the usage of this interface, whether it is a
frontpanel interface or a backplane interface used for interswitching
in distributed environments.
frontpanelport -
The interface behaves as a normal interface visible to the management
and other protocols.
backplaneport -
This port operates as back plane interface in the system enabling
communication across the line cards present in the system. This
interface will be masked from the management control for all the
protocol related operations. This can be used in distributed
environments wherein protocols are ran over every individual line
cards to achieve better CPU utilization and performance. Proprietary
PDU and tailored control PDU flow out of this interface to keep the
system information intact across the line cards present in the system.
This can be enabled only over the physical interface and not over any
other interface."
DEFVAL { 1 }
::= { ifMainExtEntry 10}
ifMainExtPortSecState OBJECT-TYPE
SYNTAX INTEGER {
untrusted (0),
trusted (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interface port security state says whether the port is connected
to trusted hosts or not. If a port is trusted, the packets coming
on that ports will also be trusted. By default all the ports will be
untrusted. If the interface is part of a port channel it cannot be set."
DEFVAL { trusted }
::={ ifMainExtEntry 11 }
ifMainExtInPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets received on this interface. This includes the
total of Unicast, Multicast and Broadcast packets received on a interface."
::={ ifMainExtEntry 12 }
ifMainExtLinkUpEnabledStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enables or disables Link Up Delay functionality in this port.
A value of 'enabled'(1) indicates that, operational status of the
link is suspended for a configured delay time 'ifMainExtLinkUpDelayTimer'.
A value of 'disabled' (2) indicates that the operational status of the
link is not delayed and indicated to the higher layers immediately."
DEFVAL { disabled }
::= { ifMainExtEntry 13}
ifMainExtLinkUpDelayTimer OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This configures the delay timer for the link up enabled interface.
It takes the timer value (in seconds) minimum value as 1 and
maximum value as 1000."
DEFVAL { 2 }
::= { ifMainExtEntry 14}
ifMainExtLinkUpRemainingTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is for displaying the pending time left
for the link Operation Status to be made UP."
::= { ifMainExtEntry 15}
-- ----------------------------------------------------------------------------
-- CFA Custom TLV Table
-- ----------------------------------------------------------------------------
ifCustTLVTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfCustTLVEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows generic TLV data to be configured per-port.
It may be used to store any port-specific information that
is required by any application."
::= { if 13 }
ifCustTLVEntry OBJECT-TYPE
SYNTAX IfCustTLVEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry about the TLV information"
INDEX { ifMainIndex, ifCustTLVType }
::= { ifCustTLVTable 1 }
IfCustTLVEntry ::=
SEQUENCE {
ifCustTLVType Unsigned32,
ifCustTLVLength Unsigned32,
ifCustTLVValue DisplayString,
ifCustTLVRowStatus RowStatus
}
ifCustTLVType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of the TLV Information."
::= { ifCustTLVEntry 1 }
ifCustTLVLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Length of the TLV Information.
Specification of this object is mandatory for ifCustTLVRowStatus to
be made active. Length should be configured after the row creation in
ifCustTLVTable and before configuring the ifCustTLVValue.
The value 0 is not allowed to be set."
::= { ifCustTLVEntry 2 }
ifCustTLVValue OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Value of the TLV Information. The default value is 0."
::= { ifCustTLVEntry 3 }
ifCustTLVRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus of the Corresponding Entry."
::= { ifCustTLVEntry 4 }
-- ----------------------------------------------------------------------------
-- CFA Custom OpaqueAttributes Table
-- ----------------------------------------------------------------------------
ifCustOpaqueAttrTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfCustOpaqueAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows generic integer attributes to be configured
per-port. These attributes will be opaque from ISS's point of
view and will not be processed/understood by ISS."
::= { if 14 }
ifCustOpaqueAttrEntry OBJECT-TYPE
SYNTAX IfCustOpaqueAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for every opaque attribute on each port."
INDEX { ifMainIndex, ifCustOpaqueAttributeID }
::= { ifCustOpaqueAttrTable 1 }
IfCustOpaqueAttrEntry ::=
SEQUENCE {
ifCustOpaqueAttributeID INTEGER,
ifCustOpaqueAttribute Unsigned32,
ifCustOpaqueRowStatus RowStatus
}
ifCustOpaqueAttributeID OBJECT-TYPE
SYNTAX INTEGER{
opaqueAttr1 (1),
opaqueAttr2 (2),
opaqueAttr3 (3),
opaqueAttr4 (4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OpaqueAttribute ID configured on the port. Four opaque attributes are
supported on each port"
::= { ifCustOpaqueAttrEntry 1 }
ifCustOpaqueAttribute OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Value for the Opaque attribute.This value can be altered when
ifCustOpaqueRowStatus is ACTIVE."
DEFVAL { 0 }
::= { ifCustOpaqueAttrEntry 2 }
ifCustOpaqueRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus of the Corresponding Entry. NOT_IN_SERVICE value is not
supported."
::= { ifCustOpaqueAttrEntry 3 }
-- ===========================================================
-- I-LAN Interface configuration table
-- ===========================================================
ifBridgeILanIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfBridgeILanIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to read the status of an I-Lan interface
created from Iftable. An I-LAN Interface is
used to create internal connections between bridge ports in a
802.1 device. An I-LAN Interfaces can be directly associated
with a set of bridge ports. An I-LAN Interfaces can also be
used as a stacking interface to relate other interfaces before
association to bridge ports.
For example, an I-LAN interface can be created to link traffic
between a PIP and a CBP. This involves creation of an interface
of type iLan with a corresponding entry made in the ifTable.
The IfIndex corresponding to the ILAN is put in the IlanifTable.
A CBP is created in a B Component of IfType internal and CBP
related IfEntry is stacked upon the IfEntry of the I-LAN using
the IfStackTable. Similarly, a PIP is created in a I Component
of IfType internal and PIP related IfEntry is stacked upon the
IfEntry of the I-LAN using the IfStackTable.
Finally, a VIP is created with ifType internal on the I-Component
and is associated with the PIP, thus completing the path from
the I-Component's MAC relay to the CBP on the B-Component.
Entries in this table must be persistent over power up
restart/reboot."
::= { if 15 }
ifBridgeILanIfEntry OBJECT-TYPE
SYNTAX IfBridgeILanIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry consists of a Status to get the I-Lan interface status"
INDEX { ifIndex }
::= { ifBridgeILanIfTable 1 }
IfBridgeILanIfEntry ::=
SEQUENCE {
ifBridgeILanIfStatus
INTEGER
}
ifBridgeILanIfStatus OBJECT-TYPE
SYNTAX INTEGER
{
active (1),
outOfService (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to read the status of an I-Lan interface
created from Iftable."
::= { ifBridgeILanIfEntry 1 }
-- ======================================================
-- IfType Protocol Deny Table.
-- ======================================================
ifTypeProtoDenyTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfTypeProtoDenyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to configure the interface types and bridge port types accessible
to various protocol(s). This table will indicate whether
a particular type of interface is to be created or be visible
in the given protocol module. An entry in this table will cause the
particular type of interface to be denied from being accessed by the
protocol i.e. the particular type of interface will not be created
(i.e. visible) in the given protocol."
::= { if 16 }
ifTypeProtoDenyEntry OBJECT-TYPE
SYNTAX IfTypeProtoDenyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table will give the interface type and bridge port type
that will not be accessible to the protocol for the mentioned context.
Only valid and allowed combinations of ifTypeProtoDenyMainType and
ifTypeProtoDenyBrgPortType must be configured by the administrator."
INDEX { ifTypeProtoDenyContextId, ifTypeProtoDenyMainType,
ifTypeProtoDenyBrgPortType, ifTypeProtoDenyProtocol }
::= { ifTypeProtoDenyTable 1 }
IfTypeProtoDenyEntry ::=
SEQUENCE {
ifTypeProtoDenyContextId Unsigned32,
ifTypeProtoDenyMainType INTEGER,
ifTypeProtoDenyBrgPortType INTEGER,
ifTypeProtoDenyProtocol INTEGER,
ifTypeProtoDenyRowStatus RowStatus
}
ifTypeProtoDenyContextId OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies a virtual context in which to deny access of the given interface
type and bridge port type to a protocol."
::= { ifTypeProtoDenyEntry 1 }
ifTypeProtoDenyMainType OBJECT-TYPE
SYNTAX INTEGER {
ethernetCsmacd(6), -- Ethernet/802.3
propVirtual (53), -- Proprietary Virtual Interface
ieee8023ad(161), -- Link Aggregation Mib
brgPort(209), -- Bridge port used for creating virtual ports in PBB
pip (248) -- Virtual (Internal) Provider Instance port
} -- These are the currently supported
-- interfaces. More can be added at a
-- later time.
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object type refers to the ifMainType.
The interface types that are currently supported by this table are
ethernetCsmacd(6), propVirtual(53), ieee8023ad(161), brgPort(209) and
pip(248)."
::= { ifTypeProtoDenyEntry 2 }
ifTypeProtoDenyBrgPortType OBJECT-TYPE
SYNTAX INTEGER {
providerNetworkPort (1),
customerNetworkPortPortBased (2),
customerNetworkPortStagged (3),
customerEdgePort (4),
propCustomerEdgePort (5),
propCustomerNetworkPort (6),
propProviderNetworkPort (7),
customerBridgePort (8),
customerNetworkPortCtagged (9),
virtualInstancePort (10),
providerInstancePort (11),
customerBackbonePort (12)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object type refers to ifMainBrgPortType."
::= { ifTypeProtoDenyEntry 3 }
ifTypeProtoDenyProtocol OBJECT-TYPE
SYNTAX INTEGER {
pnac(1),
la(2),
xstp(3),
vlan(4),
garp(5),
mrp(6),
pbb(7),
ecfm(8),
elmi(9),
snoop(10),
lldp(11),
bridge(12),
qos(13)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the protocol for which the corresponding interface type and
bridge port type will not be accessible/visible."
::= {ifTypeProtoDenyEntry 4 }
ifTypeProtoDenyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of the row. Valid values are 'createAndGo' and
'destroy'. A row can be created in this table by assigning the value
'createAndGo' for the status object which will cause the entry to become
active. An 'active' entry will identify the interface type and bridge port
type that will not be acccessible to the specified protocol for the context.
In other words, interfaces of the given interface type and bridge port
type will not be visible/created in the given protocol.
An 'active' row can be deleted by assigning the value 'destroy' to
the status. Once the entry is destroyed then all the interfaces of the
specified interface type and bridge port type will be accessible to the
specified protocol for the context."
::= {ifTypeProtoDenyEntry 5 }
-- Debug Trace SCALAR object
ifmDebug OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables the tracing in the selected submodule in CFA. A 32 bit
integer is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initialisation and Shutdown Trace.
BIT 1 - Management trace.
BIT 2 - Data path trace.
BIT 3 - Control Plane trace.
BIT 4 - Packet Dump.
BIT 5 - OS Resource trace.
BIT 6 - All Failure trace (All failures including Packet Validation)
BIT 7 - Buffer Trace.
Different submodule tracing.
BIT 25 - ENET packet dump.
BIT 26 - IP packet dump.
BIT 27 - ARP packet dump.
BIT 28 - Exit Trace used during intialization.
BIT 29 - Error messages.
The remaining bits are reserved. The combination of levels and
submodules are allowed i.e. Tracing can be allowed at all failure
and data path level in All submodules by setting the BIT
appropriately.
For Example, setting the debug value to the following bit stream,
00000000000000010000000000000100 will enable data path trace
prints in CFA module. Multiple submodules and multiple levels can
be combined by setting the corresponding bits.
For Example, setting the debug value to the following bit stream,
00000000000000110000000000001100 will enable data path and
control plane trace prints in CFA and CFA Priority modules.
Note : BIT0 is the least significant bit and BIT31 is the most
significant bit."
::= { if 17 }
-- ifIvrMappingTable
-- Mapping of multiple Vlans to IVR interfaces.
ifIvrMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfIvrMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the list of vlans to be
associated for an IVR interface.
The primary Index to this table can only be a IVR interface."
::= { if 18 }
ifIvrMappingEntry OBJECT-TYPE
SYNTAX IfIvrMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table gives an assoicated vlan to an IVR
interface."
INDEX { ifMainIndex, ifIvrAssociatedVlan }
::= { ifIvrMappingTable 1 }
IfIvrMappingEntry ::=
SEQUENCE {
ifIvrAssociatedVlan VlanId,
ifIvrMappingRowStatus RowStatus
}
ifIvrAssociatedVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies one of the associated VLANs for a given
IVR interface. Vlan Id associated with an IVR interface during
IVR interface creation, should not be configured as
ifIvrAssociatedVlan for that IVR interface.
ifIvrAssociatedVlan and the primary vlan (vlan associated with
IVR during IVR creation) for an IVR interface should be in the
same Layer 2 context."
::= { ifIvrMappingEntry 1 }
ifIvrMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes the Row Status for port isolation table entry.
Only 'CreateAndGo' and 'destroy' values are allowed for this
object. 'CreateAndWait' and 'notInService' values are not allowed.
Example:
To add vlans 2, 3 as associated vlans to an IVR interface with
interface index as 10 in this table, the following sequence
to be followed:
1. Set the ifIvrMappingRowStatus as 'CreateAndGo' for the
entry with index
(ifMainIndex = 10, ifIvrAssociatedVlan = 2)
2. Set the ifIvrMappingRowStatus as 'CreateAndGo' for the
entry with index
(ifMainIndex = 10, ifIvrAssociatedVlan = 3)
To delete vlan 3 from the list of associated vlans for an IVR
interface with IfIndex = 10 ports, do the following:
Set the ifIvrMappingRowStatus as 'destroy' for the
entry with index
(ifMainIndex = 10, ifIvrAssociatedVlan = 3)."
::= { ifIvrMappingEntry 2 }
-- Cfa Ff Group
-- This group defines objects for Management of the Fast Forwarding
-- feature of the CFA.
ffFastForwardingEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object permits the enabling and disabling of
the Fast Forwarding feature in the router. Setting of
this variable to TRUE(1) enables fast-forwarding and
setting it to FALSE(2) disables it."
DEFVAL { false }
::= { ff 1 }
ffCacheSize OBJECT-TYPE
SYNTAX Integer32 (10..65535)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object permits the resizing of the Host
Cache. This object can be changed only when
the Fast Forwarding Mechanism is disabled.
For changing the Cache Size, The Fast-Forwarding
Mechanism should be disabled first (this will
result in loss of all current entries in the
cache) and then enabled again after specifying
the new size."
::= { ff 2 }
ffIpChecksumValidationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object permits the enabling and disabling of
the validation of the IP Checksum for incoming
IP packets. Setting of this variable to TRUE(1) enables
the checksum validation and setting it to FALSE(2)
disables it."
DEFVAL { true }
::= { ff 3 }
ffCachePurgeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A counter which indicates the number of times the
entries in the Host Cache Table were purged due
to cache overflow."
::= { ff 4 }
ffCacheLastPurgeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates the SysUpTime when the last purging of
entries in the Host Cache Table took place."
::= { ff 5 }
ffStaticEntryInvalidTrapEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Permits enabling and disabling of the generation of
ffStaticEntryInvalid SNMP Enterprise Trap when a static
entry becomes invalid. When its value is TRUE(1), the
trap is generated when a static entry become invalid."
DEFVAL { true }
::= { ff 6 }
ffCurrentStaticEntryInvalidCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A counter which indicates the number of static
entries in the Host Cache Table that are
currently invalid."
::= { ff 7 }
ffTotalEntryCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A counter which indicates the total number of
entries in the Host Cache Table."
::= { ff 8 }
ffStaticEntryCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A counter which indicates the number of static
entries in the Host Cache Table."
::= { ff 9 }
ffTotalPktsFastForwarded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A counter which indicates the number of packets
that were successfully fast-forwarded by the
host cache mechanism."
::= { ff 10 }
-- ffTable
-- This table shows the current status of the Host Cache in the
-- system.
ffHostCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF FfHostCacheEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table has entries corresponding to the current
entries in the Host Cache. The entries in this table
can be added, deleted or modified."
::= { ff 11 }
ffHostCacheEntry OBJECT-TYPE
SYNTAX FfHostCacheEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An Entry consisting of all the information
about an entry in the Host Cache."
INDEX { ffHostCacheDestAddr }
::= { ffHostCacheTable 1 }
FfHostCacheEntry ::=
SEQUENCE {
ffHostCacheDestAddr IpAddress,
ffHostCacheNextHopAddr IpAddress,
ffHostCacheIfIndex InterfaceIndex,
ffHostCacheNextHopMediaAddr OCTET STRING,
ffHostCacheHits Counter32,
ffHostCacheLastHitTime TimeStamp,
ffHostCacheEntryType INTEGER,
ffHostCacheRowStatus RowStatus
}
ffHostCacheDestAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The IP address of the destination host. "
::= { ffHostCacheEntry 1 }
ffHostCacheNextHopAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The IP address of the next-hop to which a packet
for this host are forwarded. This could be same as
ffHostCacheDestAddr if the next-hop is the end-host
as well.
When creating a static entry, this object
should be set with the IP address of the next-hop
(router) for a host which is not directly connected
to our system and with the IP address of the host
itself for a host which is directly connected to us.
A set on this object for an entry whose
ffHostCacheEntryType is dynamic is not permitted."
::= { ffHostCacheEntry 2 }
ffHostCacheIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Identifies the MIB-2 ifIndex of the outgoing
interface over which packets to this host are sent.
When creating a static entry, this object should be
set with the ifIndex of our network interface
for reaching the specified next-hop.
It is mandatory to specify the next-hop IP address
using the ffHostCacheNextHopAddr before setting this
value. The specified ifIndex should be that of an
interface which is registered with IP.
A set on this object for an entry
whose ffHostCacheEntryType is dynamic is not
permitted."
::= { ffHostCacheEntry 3 }
ffHostCacheNextHopMediaAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..6))
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Provides the media address of the next-hop
to which the packet for this host is to be sent to.
It is mandatory to specify the next-hop IP address
and the outgoing ifIndex using the
ffHostCacheNextHopAddr and ffHostCacheIfIndex
respectively before setting this value.
This object must be specified for hosts, which are
reached through the interfaces of ethernetCsmacd(6)
and iso88025TokenRing(9) type. The value for such
interfaces would be the MAC address as per the
representation used for the particular media.
For interfaces of type ppp(23) and
pppMultilinkBundle(108), this object must have the
default value 0.
For virtual circuit interfaces (type miox25(38) and
frameRelayMPI(92)), this object must have the MIB-2
ifIndex assigned to the respective virtual circuit.
For virtual interfaces (type ipOverAtm(114) and
frameRelay(32)), this object MAY be used to (optionally)
specify the MIB-2 ifIndex assigned to the outgoing
virtual circuit. If not specified the value would be
obtained automatically from the respective modules.
A set on this object for an entry whose
ffHostCacheEntryType is dynamic is not permitted."
::= { ffHostCacheEntry 4 }
ffHostCacheHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates the total number of packets fast-
forwarded to this host."
::= { ffHostCacheEntry 5 }
ffHostCacheLastHitTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates the SysUpTime when the last packet
was fast-forwarded to this host."
::= { ffHostCacheEntry 6 }
ffHostCacheEntryType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
dynamic (2)
}
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"An object, which indicates the type of this Host Cache
entry.
A static entry is an entry created by the Network
Manager and is not purged by the system. Such entries
would be invalidated due to route or other changes
but will continue to remain in the Host Cache.
Dynamic entries are those entries which have been learnt by
the system and which can be purged in the event of
a cache overflow or invalidation due to route or other
changes.
All entries created through SNMP must set this object to
static otherwise."
DEFVAL { static }
::= { ffHostCacheEntry 7 }
ffHostCacheRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"A RowStatus object for addition/deletion of Host
Cache entries. It also indicates the status of the
entry.
Set action is not allowed for notInService(2). An entry,
which has become invalid due to a route failure or
address resolution failure, would have the status
'notInService'.
An entry for a host for which the link layer
information can be cached but the information is
not currently available would have the status 'notReady'.
All active entries with all possible information
complete would have the value 'active'."
::= { ffHostCacheEntry 8 }
-- Cfa Fm Group
-- This group defines objects for Fault Management features.
fmMemoryResourceTrapEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Permits the enabling and disabling of
fmLowMemoryResource Trap when a memory
allocation failure is encountered in the
module."
DEFVAL { true }
::= { fm 1 }
fmTimersResourceTrapEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Permits the enabling and disabling of
fmLowTimerResource Trap when a request
for a timer fails in the module."
DEFVAL { true }
::= { fm 2 }
fmTracingEnable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Permits the enabling and disabling of
the generation of the log/trace messages
throughout the module. This object acts
as a Tracing Level Flag and specifies
the level of trace or log to be enabled in
the module."
DEFVAL { 0 }
::= { fm 3 }
fmMemAllocFailCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maintains a count of the number of times
when a failure was encountered while memory
allocation operation in the module."
::= { fm 4 }
fmTimerReqFailCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maintains a count of the number of times
when a failure was encountered while requesting
a timer in the module."
::= { fm 5 }
-- Notifications or Traps
trapPrefix OBJECT IDENTIFIER ::= { traps 0 }
fmLowTimerResource NOTIFICATION-TYPE
OBJECTS {
fmTimerReqFailCount
}
STATUS deprecated
DESCRIPTION
"This trap is generated whenever there is a failure in
a timer related operation in the module.
This trap is generated only when the value of the
fmTimersResouceTrapEnable object is TRUE(1)."
::= { trapPrefix 1 }
fmLowBufferResource NOTIFICATION-TYPE
OBJECTS {
fmMemAllocFailCount
}
STATUS deprecated
DESCRIPTION
"This trap is generated when a memory allocation
failure occurs in the module. This
trap is generated only when the value of the
fmMemoryResourceTrapEnable object is TRUE(1)."
::= { trapPrefix 2 }
ffStaticEntryInvalid NOTIFICATION-TYPE
OBJECTS {
ffHostCacheIfIndex,
ffHostCacheEntryType
}
STATUS deprecated
DESCRIPTION
"This trap is generated when a static entry
in the ffHostCacheTable becomes invalid
due to a route deletion or address resolution failure. This
trap is generated only when the value of the
ffStaticEntryInvalidTrapEnable object is TRUE (1)."
::= { trapPrefix 3 }
ifCreated NOTIFICATION-TYPE
OBJECTS {
ifMainIndex
}
STATUS current
DESCRIPTION
"This trap is generated when interface Row Status
is Active or interface is created."
::= { trapPrefix 4 }
ifDeleted NOTIFICATION-TYPE
OBJECTS {
ifMainIndex
}
STATUS current
DESCRIPTION
"This trap is generated when interface Row Status
is Destroy or interface is deleted."
::= { trapPrefix 5 }
ifUfdEnabled NOTIFICATION-TYPE
OBJECTS {
ifMainIndex,
ifMainUfdOperStatus
}
STATUS current
DESCRIPTION
"This trap is generated when the interface's Uplink Failure
Detection(UFD) operational status is moved from UFD error
disabled to Up state"
::= { trapPrefix 6 }
ifUfdErrorDisabled NOTIFICATION-TYPE
OBJECTS {
ifMainIndex,
ifMainUfdOperStatus
}
STATUS current
DESCRIPTION
"This trap is generated when the interface's Uplink Failure
Detection(UFD) operational status is moved from Up to UFD
error disabled state"
::= { trapPrefix 7 }
-- Implementation of the of 64 bit Error Counters
ifHCErrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfHCErrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of interface entries. The number of entries is
given by the value of ifNumber. This table contains
additional objects for the interface table."
::= { if 19 }
ifHCErrorEntry OBJECT-TYPE
SYNTAX IfHCErrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing additional management information
applicable to a particular interface."
AUGMENTS { ifEntry }
::= { ifHCErrorTable 1 }
IfHCErrorEntry ::=
SEQUENCE {
ifHCInDiscards Counter64,
ifHCInErrors Counter64,
ifHCInUnknownProtos Counter64,
ifHCOutDiscards Counter64,
ifHCOutErrors Counter64
}
ifHCInDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet could be to
free up buffer space.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of ifCounterDiscontinuityTime.
This object is a 64-bit version of ifInDiscards"
::= { ifHCErrorEntry 1 }
ifHCInErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from being
deliverable to a higher-layer protocol. For character-
oriented or fixed-length interfaces, the number of inbound
transmission units that contained errors preventing them
from being deliverable to a higher-layer protocol.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of ifCounterDiscontinuityTime.
This object is a 64-bit version of ifInErrors"
::= { ifHCErrorEntry 2 }
ifHCInUnknownProtos OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of packets
received via the interface which were discarded because of
an unknown or unsupported protocol. For character-oriented
or fixed-length interfaces that support protocol
multiplexing the number of transmission units received via
the interface which were discarded because of an unknown or
unsupported protocol. For any interface that does not
support protocol multiplexing, this counter will always be
0.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of ifCounterDiscontinuityTime.
This object is a 64-bit version of ifInUnknownProtos"
::= {ifHCErrorEntry 3 }
ifHCOutDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of ifCounterDiscontinuityTime.
This object is a 64-bit version of ifOutDiscards"
::= { ifHCErrorEntry 4 }
ifHCOutErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not be
transmitted because of errors.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of ifCounterDiscontinuityTime.
This object is a 64-bit version of ifHCOutErrors"
::= { ifHCErrorEntry 5}
ifSecurityBridging OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or Disables Security for Bridged Packets globally."
DEFVAL { disabled }
::= { if 20 }
ifSetSecVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanId values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanId value in that octet.
Packets Bridged on these VLAN's should be Secured"
::= { if 21 }
ifResetSecVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanId values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanId value in that octet.
This is the set of vlans to dis-associate security
for Packets Bridged on these VLAN's"
::= { if 22 }
ifSecIvrIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An Integer which Indicates the IfIndex of IVR Interface used in
Security Processing of Bridged Traffic "
::= {if 23}
-- ifAvailableIndexTable Table
-- This is to get the next available index for a given iftype
ifAvailableIndexTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfAvailableIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table returns the next available free interface
index for the given interface type"
::= {if 24}
ifAvailableIndexEntry OBJECT-TYPE
SYNTAX IfAvailableIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an entry in the ifAvailableFreeIndex Table"
INDEX { ifType }
::= { ifAvailableIndexTable 1 }
IfAvailableIndexEntry ::=
SEQUENCE{
ifAvailableFreeIndex InterfaceIndex
}
ifAvailableFreeIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the next available free interfac index for a given ifType"
::= { ifAvailableIndexEntry 1 }
-- Cfa Packet Analyser Group
-- This group defines objects for Packet Analyser
-- This table is used for analysing the incoming packet and to increment
-- the counter if pattern is matching as per given input
fsPacketAnalyserTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsPacketAnalyserTable
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table is used by the Packet Analyser for
Pattern matching on particular ports"
::= { pa 1 }
fsPacketAnalyserEntry OBJECT-TYPE
SYNTAX FsPacketAnalyserTable
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Pattern matching information
used by the Packet analyser"
INDEX { fsPacketAnalyserIndex }
::= { fsPacketAnalyserTable 1 }
FsPacketAnalyserTable ::=
SEQUENCE {
fsPacketAnalyserIndex Unsigned32,
fsPacketAnalyserWatchValue DisplayString,
fsPacketAnalyserWatchMask DisplayString,
fsPacketAnalyserWatchPorts PortList,
fsPacketAnalyserMatchPorts PortList,
fsPacketAnalyserCounter Counter32,
fsPacketAnalyserTime TimeTicks,
fsPacketAnalyserCreateTime TimeTicks,
fsPacketAnalyserStatus RowStatus
}
fsPacketAnalyserIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An arbitrary integer value, greater than zero,
which uniquely identifies a pattern to be matched"
::= { fsPacketAnalyserEntry 1 }
fsPacketAnalyserWatchValue OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..1600))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This represents the pattern which is to be matched
in the packet to be analysed by the packet analyser"
::= { fsPacketAnalyserEntry 2 }
fsPacketAnalyserWatchMask OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..1600))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The mask for the pattern to be matched by the packet analyser"
::= { fsPacketAnalyserEntry 3 }
fsPacketAnalyserWatchPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Specifies the complete set of ports over which the pattern is
to be matched by the packet analyser"
::= { fsPacketAnalyserEntry 4 }
fsPacketAnalyserMatchPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Specifies the complete set of ports over which the pattern is
matched by the packet analyser"
::= { fsPacketAnalyserEntry 5 }
fsPacketAnalyserCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of times the pattern was matched over the watched ports"
::= { fsPacketAnalyserEntry 6 }
fsPacketAnalyserTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The value of sysUpTime when the pattern was last matched"
::= { fsPacketAnalyserEntry 7 }
fsPacketAnalyserCreateTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The value of sysUpTime when the system was initiated"
::= { fsPacketAnalyserEntry 8 }
fsPacketAnalyserStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Specifies the Row Status for the entry in this table"
::= { fsPacketAnalyserEntry 9 }
fsPacketTransmitterTable OBJECT-TYPE
SYNTAX SEQUENCE OF FsPacketTransmitterTable
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table is used by the Packet Transmitter for
sending the packets on particular ports"
::= { pa 2 }
fsPacketTransmitterEntry OBJECT-TYPE
SYNTAX FsPacketTransmitterTable
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Packet information
used by the Packet Transmitter"
INDEX { fsPacketTransmitterIndex }
::= { fsPacketTransmitterTable 1 }
FsPacketTransmitterTable ::=
SEQUENCE {
fsPacketTransmitterIndex Unsigned32,
fsPacketTransmitterValue DisplayString,
fsPacketTransmitterPort PortList,
fsPacketTransmitterInterval TimeTicks,
fsPacketTransmitterCount Unsigned32,
fsPacketTransmitterStatus RowStatus
}
fsPacketTransmitterIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An arbitrary integer value, greater than zero,
which uniquely identifies a packet to be sent"
::= { fsPacketTransmitterEntry 1 }
fsPacketTransmitterValue OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..1600))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This represents the pattern which is to be sent
through the given port by the packet transmitter"
::= { fsPacketTransmitterEntry 2 }
fsPacketTransmitterPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Specifies the port over which the packet is to be sent by
the packet transmitter"
::= { fsPacketTransmitterEntry 3 }
fsPacketTransmitterInterval OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The Time interval for sending the packet over the port in seconds"
::= { fsPacketTransmitterEntry 4 }
fsPacketTransmitterCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Number of packet to be sent over the ports "
::= { fsPacketTransmitterEntry 5 }
fsPacketTransmitterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Specifies the Row Status for the entry in this table"
::= { fsPacketTransmitterEntry 6 }
-- ifACTable
-- This table is used for the Attachment Circuit related
-- configurations.
ifACTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfACEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Attachment Circuit interface related
configurations. Attachment Circuit is a virtual interface
that is a combination of physical port and customer vlan
identifier or it is a virtual interface that contains
underlying physical port alone.
This table is an extension to the ifMainTable. The index to
this table has the semantics of the ifMainIndex of the
ifMainTable."
::= { if 25 }
ifACEntry OBJECT-TYPE
SYNTAX IfACEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing AC-related information applicable
to attachment cirucit interface only."
INDEX { ifMainIndex }
::= { ifACTable 1 }
IfACEntry ::=
SEQUENCE {
ifACPortIdentifier InterfaceIndex,
ifACCustomerVlan VlanId
}
ifACPortIdentifier OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the physical interface on which the attachment
circuit interface is present. The operational status of the
attachment circuit interface depends on this port's operational
status. That is if the operational status of ifACPortIdentifier's
is UP or DOWN, then the operational status of the AC interface
will be UP or DOWN respectively."
::= { ifACEntry 1 }
ifACCustomerVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the customer vlan present for the attachment circuit
interface. This object alone can not determine the attachment
circuit interface. To determine that, this object should be together
present with the ifACPortIdentifier.This is the optional paramater."
::= { ifACEntry 2 }
ifUfdSystemControl OBJECT-TYPE
SYNTAX INTEGER {
start(1),
shutdown(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative system control status of the Uplink Failure
Detection(UFD) module.
The value 'start' (1) indicates that the Uplink Failure
Detection(UFD) feature should be started in the system and all
resources required by Uplink Failure Detection(UFD) module should
be allocated.
The value 'shutdown' (2) indicates that the Uplink Failure
Detection(UFD) feature should be shutdown in the device and all
allocated memory must be released."
DEFVAL { shutdown }
::= { if 26 }
ifUfdModuleStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This read write objects gives actual status of the Uplink
Failure Detection(UFD).
When Uplink Failure Detection(UFD) is enabled, UFD starts
functioning. When the UFD is disabled all the dynamically
allocated memory will be freed and Uplink Failure Detection
(UFD) stops functioning."
DEFVAL { disabled }
::= { if 27 }
ifSplitHorizonSysControl OBJECT-TYPE
SYNTAX INTEGER { start(1), shutdown(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative system control status
requested by management for Split Horizon.
The value 'start' (1) indicates that all
resources required for split horizon
should be allocated and Split horizon
should be supported in the device on all
ports. The value 'shutdown' (2) indicates
that Split Horizon should be shutdown in
the device on all ports and all allocated
memory must be released."
DEFVAL { shutdown }
::= { if 28 }
ifSplitHorizonModStatus OBJECT-TYPE
SYNTAX
INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative module status requested
by management for Split Horizon.This
enables or disables Split horizon in the
system. A value of 'enabled'(1) indicates
that split horizon must be enabled in all the
ports in the system.A value of 'disabled' (2)
indicates that split horizon must be
disabled in all the ports in the system ."
DEFVAL { disabled }
::= { if 29 }
-- ifUfdGroupTable
-- This table is used for the Uplink Failure Detection(UFD) Group information
ifUfdGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfUfdGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of all the Uplink Failure Detection
(UFD). Group entries in the system.
This table is a extension to the ifMainTable. The index to this
table is the group id. Entries are created when the group id is
created in this table."
::= { if 30 }
ifUfdGroupEntry OBJECT-TYPE
SYNTAX IfUfdGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing group information with
uplink/downlink port count and status of the group."
INDEX { ifUfdGroupId }
::= { ifUfdGroupTable 1 }
IfUfdGroupEntry ::=
SEQUENCE {
ifUfdGroupId Integer32,
ifUfdGroupName DisplayString,
ifUfdGroupStatus INTEGER,
ifUfdGroupUplinkPorts PortList,
ifUfdGroupDownlinkPorts PortList,
ifUfdGroupDesigUplinkPort InterfaceIndex,
ifUfdGroupUplinkCount Integer32,
ifUfdGroupDownlinkCount Integer32,
ifUfdGroupRowStatus RowStatus
}
ifUfdGroupId OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An identifier that uniquely identifies the
group Entry in this table."
::= { ifUfdGroupEntry 1 }
ifUfdGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to identity the Uplink Failure Detection
(UFD) Group-name."
::= { ifUfdGroupEntry 2 }
ifUfdGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object for indicating the status of the group.
The group status can be set 'up' only when any one uplink
port is in admin and operationally 'UP' state in the group.
The group status can be set 'down' only when all uplink
ports within the group is in admin and operationally 'DOWN' or
none uplink ports assigned in the group."
DEFVAL { down }
::= { ifUfdGroupEntry 3 }
ifUfdGroupUplinkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of uplink ports which are mapped with
group"
::= { ifUfdGroupEntry 4 }
ifUfdGroupDownlinkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of downlink ports which are mapped
with group"
::= { ifUfdGroupEntry 5 }
ifUfdGroupDesigUplinkPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"A port is termed as designated uplink when the port is connected
to the network and it has more preference to a particular set of
uplink ports.
Broadcast/unknown multicast will use this designated port to
reach uplink."
::= { ifUfdGroupEntry 6 }
ifUfdGroupUplinkCount OBJECT-TYPE
SYNTAX Integer32 (1..48)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter which indicates the number of
Uplink ports within the group"
::= { ifUfdGroupEntry 7 }
ifUfdGroupDownlinkCount OBJECT-TYPE
SYNTAX Integer32 (1..48)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter which indicates the number of
Downlink ports within the group"
::= { ifUfdGroupEntry 8 }
ifUfdGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to manage creation and deletion of rows
in this Uplink Failure Detection(UFD) group table."
::= { ifUfdGroupEntry 9 }
ifLinkUpEnabledStatus OBJECT-TYPE
SYNTAX
INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This enables or disables Link Up Delay functionality in the System.
A value of 'enabled'(1) indicates that, operational status of the
link is suspended for a configured delay time 'ifMainExtLinkUpDelayTimer'.
A value of 'disabled' (2) indicates that the operational status of the
link is not delayed and indicated to the higher layers immediately."
DEFVAL { disabled }
::= { if 31 }
-- Secondary IP address configuration for OOB interface for local node and remote node
ifOOBNode0SecondaryIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the secondary IP address associated with the
OOB interface of Node0"
DEFVAL { '00000000'H }
::= { if 32 }
ifOOBNode0SecondaryIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP Subnet Mask associted with the
secondary ip address of OOB interface in node0.
If not specified, this object takes the default
subnet mask value based on the class of the IP
address configured for the interface."
::= { if 33 }
ifOOBNode1SecondaryIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the secondary IP address associated with the
OOB interface of Node1 "
DEFVAL { '00000000'H }
::= { if 34 }
ifOOBNode1SecondaryIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IP Subnet Mask associted with the
secondary ip address of OOB interface in node1.
If not specified, this object takes the default
subnet mask value based on the class of the IP
address configured for the interface."
::= { if 35 }
--
-- Interface VLAN IP Table support
--
ifVlanIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfVlanIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains L3 interface attributes
that are used for manipulating entries in
various tables.
ifVlanIpTable entry creation, modification and
deletion results in related actions being
performed for the ifMainTable and the ifIpTable.
Likewise, data returned through ifVlanIpTable
table queries is derived from these tables."
::= { if 36 }
ifVlanIpEntry OBJECT-TYPE
SYNTAX IfVlanIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the L3 interface settings
for a specific VLAN on the device."
INDEX { ifVlanIpVlanId }
::= { ifVlanIpTable 1 }
IfVlanIpEntry ::= SEQUENCE {
ifVlanIpVlanId VlanId,
ifVlanIpIfIndex InterfaceIndex,
ifVlanIpAdminStatus INTEGER,
ifVlanIpAddrAllocMethod INTEGER,
ifVlanIpAddr IpAddress,
ifVlanIpSubnetMask IpAddress,
ifVlanIpRowStatus RowStatus
}
ifVlanIpVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VLAN ID for the L3 interface specification."
::= { ifVlanIpEntry 1 }
ifVlanIpIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex associated with the VLAN ID for
this L3 interface specification. An ifIndex
is automatically allocated when a new entry
is created. The ifIndex and related settings
are automatically deleted when an entry is
destroyed."
::= { ifVlanIpEntry 2 }
ifVlanIpAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state of the interface. This
attribute has similar semantics to the
ifAdminStatus object of the standard ifTable."
DEFVAL { enabled }
::= { ifVlanIpEntry 3 }
ifVlanIpAddrAllocMethod OBJECT-TYPE
SYNTAX INTEGER {
manual(1),
dynamic(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mechanism to be used for allocation of
the IPv4 address for this L3 VLAN interface."
::= { ifVlanIpEntry 4 }
ifVlanIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the IPv4 address assigned to
this L3 VLAN interface.
A valid IpAddress value is required when
creating a new entry and the associated
address allocation method is 'manual'. A
zero IpAddress value is required when
creating a new entry and the associated
address allocation method is 'dynamic'."
::= { ifVlanIpEntry 5 }
ifVlanIpSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the IPv4 address subnet mask
assigned to this L3 VLAN interface.
A valid subnet mask value is required when
creating a new entry and the associated
address allocation method is 'manual'. A
zero subnet mask value is required when
creating a new entry and the associated
address allocation method is 'dynamic'."
::= { ifVlanIpEntry 6 }
ifVlanIpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows entries to be created, modified
and deleted in the ifVlanIpTable. Values 'createAndWait',
'active' and 'destroy' are supported for Sets.
The rowStatus value of the underlying ifMainEntry is
returned when entry data is queried.
Entry creation requires data for all read-create
attributes to be specified with a 'createAndWait'
RowStatus value.
The ifVlanIpAdminStatus is the only value that can
be modified in an existing entry. This action is
performed by specifying the requested admin status
with a 'active' RowStatus value.
Table entries are deleted with a 'destroy' RowStatus.
No other attributes need to be specified for this
action to be performed."
::= { ifVlanIpEntry 10 }
END
Reference in New Issue View Git Blame Copy Permalink