619 lines
21 KiB
Plaintext
619 lines
21 KiB
Plaintext
-- *****************************************************************
|
|
-- CISCO-HSRP-EXT-MIB
|
|
--
|
|
-- Jan 2010, Sreenadh Gaddam
|
|
-- Copyright (c) 1998-2005, 2009-2010 by cisco Systems Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
|
|
CISCO-HSRP-EXT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
IpAddress,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
TruthValue,
|
|
RowStatus
|
|
FROM SNMPv2-TC
|
|
InetAddressType,
|
|
InetAddress
|
|
FROM INET-ADDRESS-MIB
|
|
ifIndex,
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
cHsrpGrpNumber
|
|
FROM CISCO-HSRP-MIB
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
|
|
ciscoHsrpExtMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201009020000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-hsrp@cisco.com"
|
|
DESCRIPTION
|
|
"The Extension MIB module for the CISCO-HSRP-MIB which is
|
|
based on RFC2281.
|
|
|
|
This MIB provides an extension to the CISCO-HSRP-MIB which
|
|
defines Cisco's proprietary Hot Standby Routing Protocol
|
|
(HSRP), defined in RFC2281. The extensions cover assigning
|
|
of secondary HSRP ip addresses, modifying an HSRP Group's
|
|
priority by tracking the operational status of interfaces,
|
|
etc.
|
|
|
|
Terminology:
|
|
HSRP is a protocol used amoung a group of routers for the
|
|
purpose of selecting an active router and a standby router.
|
|
|
|
An active router is the router of choice for routing
|
|
packets.
|
|
|
|
A standby router is a router that takes over the routing
|
|
duties when an active router fails, or when preset
|
|
conditions have been met.
|
|
|
|
A HSRP group or a standby group is a set of routers
|
|
which communicate using HSRP. An HSRP group has a group
|
|
MAC address and a group IP address. These are the
|
|
designated addresses. The active router assumes
|
|
(i.e. inherits) these group addresses. An HSRP group is
|
|
identified by a ( ifIndex, cHsrpGrpNumber ) pair.
|
|
|
|
BIA stands for Burned In Address."
|
|
REVISION "201009020000Z"
|
|
DESCRIPTION
|
|
"The following changes have been made.
|
|
|
|
[1] Objects cHsrpExtIfTrackedIpNone has been deprecated.
|
|
|
|
[2] Deprecates object group cHsrpExtIfTrackedGroupSup1, which
|
|
supplementary to cHsrpExtIfTrackedGroup.
|
|
|
|
|
|
[3] Added new compliance cHsrpExtComplianceRev2, which
|
|
deprecates cHsrpExtComplianceRev1."
|
|
REVISION "201002050000Z"
|
|
DESCRIPTION
|
|
"Added cHsrpExtIfTrackedIpNone to
|
|
cHsrpExtIfTrackedTable
|
|
|
|
Added new table cHsrpExtIfStandbyTable.
|
|
|
|
Added OBJECT-GROUP cHsrpExtIfStandbyGroup91.
|
|
|
|
Added OBJECT-GROUP cHsrpExtIfTrackedGroupSup1, which
|
|
supplementary to cHsrpExtIfTrackedGroup.
|
|
|
|
Added MODULE-COMPLIANCE cHsrpExtComplianceRev1, which
|
|
deprecates cHsrpExtCompliance."
|
|
REVISION "200602150000Z"
|
|
DESCRIPTION
|
|
"Updated the imports such that Unsigned32 is imported from
|
|
SNMPv2-SMI instead of CISCO-TC. Updated the module
|
|
description. Also updated the descriptions of
|
|
cHsrpExtIfTrackedEntry and cHsrpExtIfTracked. Formatted the
|
|
complete MIB."
|
|
REVISION "9808030000Z"
|
|
DESCRIPTION
|
|
"Initial version of this mib."
|
|
::= { ciscoMgmt 107 }
|
|
|
|
|
|
ciscoHsrpExtMIBObjects OBJECT IDENTIFIER
|
|
::= { ciscoHsrpExtMIB 1 }
|
|
|
|
-- HSRP Extension Tables
|
|
-- Extention group info
|
|
|
|
cHsrpExtGroup OBJECT IDENTIFIER
|
|
::= { ciscoHsrpExtMIBObjects 1 }
|
|
|
|
-- Interface Use Burned-In Address state
|
|
|
|
cHsrpExtIfBIA OBJECT IDENTIFIER
|
|
::= { ciscoHsrpExtMIBObjects 2 }
|
|
|
|
|
|
cHsrpExtIfTrackedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CHsrpExtIfTrackedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing information about tracked interfaces per
|
|
HSRP group."
|
|
::= { cHsrpExtGroup 1 }
|
|
|
|
cHsrpExtIfTrackedEntry OBJECT-TYPE
|
|
SYNTAX CHsrpExtIfTrackedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row of this table allows the tracking of one
|
|
interface of the HSRP group which is identified by the
|
|
(ifIndex, cHsrpGrpNumber) values in this table's INDEX clause.
|
|
Weight(priority) is given to each and every interface tracked.
|
|
When a tracked interface is unavailable, the HSRP priority of
|
|
the router is decreased. i.e cHsrpGrpPriority value assigned
|
|
to an HSRP group will reduce by the value assigned to
|
|
cHsrpExtIfTrackedPriority. This reduces the likelihood
|
|
of a router with a failed key interface becoming the
|
|
active router.
|
|
|
|
Setting cHsrpExtIfTrackedRowStatus to active starts
|
|
the tracking of cHsrpExtIfTracked by the HSRP group.
|
|
The value of cHsrpExtIfTrackedRowStatus may be set
|
|
to destroy at any time.
|
|
|
|
Entries may not be created via SNMP without explicitly setting
|
|
cHsrpExtIfTrackedRowStatus to either 'createAndGo'
|
|
or 'createAndWait'.
|
|
|
|
Entries can be created and modified via the management
|
|
protocol or by the device's local management interface.
|
|
|
|
If the row is not active, and a local management interface
|
|
command modifies that row, the row may transition to active
|
|
state.
|
|
|
|
A row entry in the cHsrpExtIfTrackedTable can not be created
|
|
unless the corresponding row in the cHsrpGrpTable has been
|
|
created. If that corresponding row in cHsrpGrpTable is
|
|
deleted, the interfaces it tracks also get deleted.
|
|
|
|
A row which is not in active state will timeout after a
|
|
configurable period (five minutes by default). This timeout
|
|
period can be changed by setting cHsrpConfigTimeout."
|
|
INDEX {
|
|
ifIndex,
|
|
cHsrpGrpNumber,
|
|
cHsrpExtIfTracked
|
|
}
|
|
::= { cHsrpExtIfTrackedTable 1 }
|
|
|
|
CHsrpExtIfTrackedEntry ::= SEQUENCE {
|
|
cHsrpExtIfTracked InterfaceIndex,
|
|
cHsrpExtIfTrackedPriority Unsigned32,
|
|
cHsrpExtIfTrackedRowStatus RowStatus,
|
|
cHsrpExtIfTrackedIpNone TruthValue
|
|
}
|
|
|
|
cHsrpExtIfTracked OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the tracked interface."
|
|
::= { cHsrpExtIfTrackedEntry 1 }
|
|
|
|
cHsrpExtIfTrackedPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority of the tracked interface for the corresponding
|
|
{ ifIndex, cHsrpGrpNumber } pair. In the range of 0 to 255, 0
|
|
is the lowest priority and 255 is the highest. When a tracked
|
|
interface is unavailable, the cHsrpGrpPriority of the router
|
|
is decreased by the value of this object instance (If the
|
|
cHsrpGrpPriority is less than the
|
|
cHsrpExtIfTrackedPriority, then the HSRP priority
|
|
becomes 0). This allows a standby router to be configured
|
|
with a priority such that if the currently active router's
|
|
priority is lowered because the tracked interface goes down,
|
|
the standby router can takeover."
|
|
DEFVAL { 0 }
|
|
::= { cHsrpExtIfTrackedEntry 2 }
|
|
|
|
cHsrpExtIfTrackedRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The control that allows modification, creation, and deletion
|
|
of entries. For detailed rules see the DESCRIPTION for
|
|
cHsrpExtIfTrackedEntry."
|
|
::= { cHsrpExtIfTrackedEntry 3 }
|
|
|
|
cHsrpExtIfTrackedIpNone OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the disable HSRP IPv4 virtual
|
|
IP address."
|
|
DEFVAL { false }
|
|
::= { cHsrpExtIfTrackedEntry 4 }
|
|
|
|
|
|
|
|
cHsrpExtSecAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CHsrpExtSecAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing information about secondary HSRP IP
|
|
Addresses per interface and group."
|
|
::= { cHsrpExtGroup 2 }
|
|
|
|
cHsrpExtSecAddrEntry OBJECT-TYPE
|
|
SYNTAX CHsrpExtSecAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CHsrpExtSecAddrEntry allows creation of secondary
|
|
IP Addresses for each cHsrpGrpEntry row.
|
|
|
|
Secondary addresses can be added by setting
|
|
cHsrpExtSecAddrRowStatus to be active. The value of
|
|
cHsrpExtSecAddrRowStatus may be set to destroy at any
|
|
time.
|
|
|
|
Entries may not be created via SNMP without explicitly setting
|
|
cHsrpExtSecAddrRowStatus to either 'createAndGo'
|
|
or 'createAndWait'.
|
|
|
|
Entries can be created and modified via the management
|
|
protocol or by the device's local management interface.
|
|
|
|
If the row is not active, and a local management interface
|
|
command modifies that row, the row may transition to active
|
|
state.
|
|
|
|
A row which is not in active state will timeout after a
|
|
configurable period (five minutes by default). This timeout
|
|
period can be changed by setting cHsrpConfigTimeout.
|
|
|
|
Before creation of a cHsrpExtSecAddrEntry row,
|
|
either cHsrpGrpConfiguredVirtualIpAddr or
|
|
cHsrpGrpLearnedVirtualIpAddr must have a valid IP Address.
|
|
This is because a secondary ip address cannot be created
|
|
unless the primary ip address has already been set.
|
|
|
|
To create a new cHsrpExtSecAddrEntry row, a management
|
|
station should choose the ifIndex of the interface which is to
|
|
be added as part of an HSRP group. Also, an HSRP group number
|
|
and a cHsrpExtSecAddrAddress should be chosen.
|
|
|
|
Deleting a {ifIndex, cHsrpGrpNumber} row in the
|
|
cHsrpGrpTable will delete all corresponding
|
|
rows in the cHsrpExtSecAddrTable.
|
|
Deleting a primary address value in the cHsrpGrpEntry row
|
|
will delete all secondary addresses for the same
|
|
{ifIndex, cHsrpGrpNumber} pair."
|
|
INDEX {
|
|
ifIndex,
|
|
cHsrpGrpNumber,
|
|
cHsrpExtSecAddrAddress
|
|
}
|
|
::= { cHsrpExtSecAddrTable 1 }
|
|
|
|
CHsrpExtSecAddrEntry ::= SEQUENCE {
|
|
cHsrpExtSecAddrAddress IpAddress,
|
|
cHsrpExtSecAddrRowStatus RowStatus
|
|
}
|
|
|
|
cHsrpExtSecAddrAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A secondary IpAddress for the {ifIndex, cHsrpGrpNumber} pair.
|
|
As explained in the DESCRIPTION for cHsrpExtSecAddrEntry, a
|
|
primary address must exist before a secondary address for
|
|
the same {ifIndex, cHsrpGrpNumber} pair can be created."
|
|
::= { cHsrpExtSecAddrEntry 1 }
|
|
|
|
cHsrpExtSecAddrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The control that allows modification, creation, and deletion
|
|
of entries. For detailed rules see the DESCRIPTION for
|
|
cHsrpExtSecAddrEntry."
|
|
::= { cHsrpExtSecAddrEntry 2 }
|
|
|
|
|
|
|
|
cHsrpExtIfStandbyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CHsrpExtIfStandbyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing information about standby
|
|
interfaces per HSRP group."
|
|
::= { cHsrpExtGroup 3 }
|
|
|
|
cHsrpExtIfStandbyEntry OBJECT-TYPE
|
|
SYNTAX CHsrpExtIfStandbyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cHsrpExtIfStandbyEntry allows an HSRP group
|
|
interface to track one or more standby interfaces.
|
|
|
|
To create a new cHsrpExtIfStandbyEntry row, a
|
|
management station should choose the ifIndex of
|
|
the interface which is to be added as part of an
|
|
HSRP group. Also, an HSRP group number and a
|
|
cHsrpExtIfStandbyIndex should be chosen."
|
|
INDEX {
|
|
ifIndex,
|
|
cHsrpGrpNumber,
|
|
cHsrpExtIfStandbyIndex
|
|
}
|
|
::= { cHsrpExtIfStandbyTable 1 }
|
|
|
|
CHsrpExtIfStandbyEntry ::= SEQUENCE {
|
|
cHsrpExtIfStandbyIndex Unsigned32,
|
|
cHsrpExtIfStandbyDestAddrType InetAddressType,
|
|
cHsrpExtIfStandbyDestAddr InetAddress,
|
|
cHsrpExtIfStandbySourceAddrType InetAddressType,
|
|
cHsrpExtIfStandbySourceAddr InetAddress,
|
|
cHsrpExtIfStandbyRowStatus RowStatus
|
|
}
|
|
|
|
cHsrpExtIfStandbyIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the index of the standby table."
|
|
::= { cHsrpExtIfStandbyEntry 1 }
|
|
|
|
cHsrpExtIfStandbyDestAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the type of Internet address
|
|
denoted by cHsrpExtIfStandbyDestAddr."
|
|
::= { cHsrpExtIfStandbyEntry 2 }
|
|
|
|
cHsrpExtIfStandbyDestAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the destination IP address of
|
|
the standby router."
|
|
::= { cHsrpExtIfStandbyEntry 3 }
|
|
|
|
cHsrpExtIfStandbySourceAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the type of Internet address
|
|
denoted by cHsrpExtIfStandbySourceAddr."
|
|
::= { cHsrpExtIfStandbyEntry 4 }
|
|
|
|
cHsrpExtIfStandbySourceAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the source IP address of
|
|
the standby router."
|
|
::= { cHsrpExtIfStandbyEntry 5 }
|
|
|
|
cHsrpExtIfStandbyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The control that allows modification, creation,
|
|
and deletion of entries. Entries may not be created
|
|
via SNMP without explicitly setting
|
|
cHsrpExtIfStandbyRowStatus to either
|
|
'createAndGo' or 'createAndWait'."
|
|
::= { cHsrpExtIfStandbyEntry 6 }
|
|
|
|
|
|
|
|
cHsrpExtIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CHsrpExtIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"HSRP-specific configurations for each physical interface."
|
|
::= { cHsrpExtIfBIA 1 }
|
|
|
|
cHsrpExtIfEntry OBJECT-TYPE
|
|
SYNTAX CHsrpExtIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If HSRP entries on this interface must use the BIA (Burned
|
|
In Address), there must be an entry for the interface in this
|
|
table. Entries of this table are only accessible if HSRP has
|
|
been enabled i.e entries can not be created if HSRP is not
|
|
enabled. Also, the interfaces should be of IEEE 802 ones
|
|
(Ethernet, Token Ring, FDDI,VLAN, LANE, TR-LANE).
|
|
|
|
Setting cHsrpExtIfRowStatus to active initiates the
|
|
entry with default value for cHsrpExtIfUseBIA as FALSE.
|
|
The value of cHsrpExtIfRowStatus may be set to destroy
|
|
at any time. If the row is not initiated, it is similar to
|
|
having cHsrpExtIfUseBIA as FALSE.
|
|
|
|
Entries may not be created via SNMP without explicitly setting
|
|
cHsrpExtIfRowStatus to either 'createAndGo' or 'createAndWait'.
|
|
|
|
Entries can be created and modified via the management
|
|
protocol or by the device's local management interface.
|
|
|
|
If the row is not active, and a local management interface
|
|
command modifies that row, the row may transition to active
|
|
state.
|
|
|
|
A row which is not in active state will timeout after a
|
|
configurable period (five minutes by default). This timeout
|
|
period can be changed by setting cHsrpConfigTimeout."
|
|
INDEX { ifIndex }
|
|
::= { cHsrpExtIfTable 1 }
|
|
|
|
CHsrpExtIfEntry ::= SEQUENCE {
|
|
cHsrpExtIfUseBIA TruthValue,
|
|
cHsrpExtIfRowStatus RowStatus
|
|
}
|
|
|
|
cHsrpExtIfUseBIA OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to TRUE, the HSRP Group MAC Address for all groups
|
|
on this interface will be the burned-in-address. Otherwise,
|
|
this will be determined by ciscoHsrpGroupNumber. In case of
|
|
sub-interfaces, UseBIA applies to all sub-interfaces on an
|
|
interface and to all groups on those sub-interfaces."
|
|
DEFVAL { false }
|
|
::= { cHsrpExtIfEntry 1 }
|
|
|
|
cHsrpExtIfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The control that allows modification, creation, and deletion
|
|
of entries. For detailed rules see the DESCRIPTION for
|
|
cHsrpExtIfEntry."
|
|
::= { cHsrpExtIfEntry 2 }
|
|
|
|
|
|
-- Notifications
|
|
-- None
|
|
--
|
|
-- Conformance groups
|
|
|
|
cHsrpExtConformance OBJECT IDENTIFIER
|
|
::= { ciscoHsrpExtMIB 3 }
|
|
|
|
cHsrpExtCompliances OBJECT IDENTIFIER
|
|
::= { cHsrpExtConformance 1 }
|
|
|
|
cHsrpExtComplianceGroups OBJECT IDENTIFIER
|
|
::= { cHsrpExtConformance 2 }
|
|
|
|
|
|
-- compliance statements
|
|
|
|
cHsrpExtCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement
|
|
the CISCO-HSRP-EXT-MIB. This is deprecated by
|
|
cHsrpExtComplianceRev1."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
cHsrpExtIfTrackedGroup,
|
|
cHsrpExtSecAddrGroup,
|
|
cHsrpExtIfGroup
|
|
}
|
|
::= { cHsrpExtCompliances 1 }
|
|
|
|
cHsrpExtComplianceRev1 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"the compliance statement for entities which implement
|
|
the CISCO-HSRP-EXT-MIB.This is deprecated by
|
|
cHsrpExtComplianceRev2."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
cHsrpExtIfTrackedGroup,
|
|
cHsrpExtSecAddrGroup,
|
|
cHsrpExtIfGroup,
|
|
cHsrpExtIfStandbyGroup91,
|
|
cHsrpExtIfTrackedGroupSup1
|
|
}
|
|
::= { cHsrpExtCompliances 2 }
|
|
|
|
cHsrpExtComplianceRev2 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the compliance statement for entities which implement
|
|
the CISCO-HSRP-EXT-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
cHsrpExtIfTrackedGroup,
|
|
cHsrpExtSecAddrGroup,
|
|
cHsrpExtIfGroup,
|
|
cHsrpExtIfStandbyGroup91
|
|
}
|
|
::= { cHsrpExtCompliances 3 }
|
|
|
|
cHsrpExtIfTrackedGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cHsrpExtIfTrackedPriority,
|
|
cHsrpExtIfTrackedRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects used to add, delete and retrieve
|
|
the interfaces getting tracked for HSRP groups."
|
|
::= { cHsrpExtComplianceGroups 1 }
|
|
|
|
cHsrpExtSecAddrGroup OBJECT-GROUP
|
|
OBJECTS { cHsrpExtSecAddrRowStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects used to add, delete and retrieve
|
|
primary and secondary Ip Addresses for HSRP groups."
|
|
::= { cHsrpExtComplianceGroups 2 }
|
|
|
|
cHsrpExtIfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cHsrpExtIfUseBIA,
|
|
cHsrpExtIfRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Object which tells if HSRP entries on this interface must
|
|
use BIA or not."
|
|
::= { cHsrpExtComplianceGroups 3 }
|
|
|
|
cHsrpExtIfStandbyGroup91 OBJECT-GROUP
|
|
OBJECTS {
|
|
cHsrpExtIfStandbyDestAddrType,
|
|
cHsrpExtIfStandbyDestAddr,
|
|
cHsrpExtIfStandbySourceAddrType,
|
|
cHsrpExtIfStandbySourceAddr,
|
|
cHsrpExtIfStandbyRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects used to add, delete and
|
|
retrieve the interfaces getting standby for
|
|
HSRP groups."
|
|
::= { cHsrpExtComplianceGroups 4 }
|
|
|
|
cHsrpExtIfTrackedGroupSup1 OBJECT-GROUP
|
|
OBJECTS { cHsrpExtIfTrackedIpNone }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The collection of HSRP interface tracked objects
|
|
which suppliments cHsrpExtIfTrackedGroup."
|
|
::= { cHsrpExtComplianceGroups 5 }
|
|
|
|
END
|
|
|
|
|
|
|