4236 lines
149 KiB
Plaintext
4236 lines
149 KiB
Plaintext
-- *******************************************************************
|
|
-- CISCO-LWAPP-SYS-MIB.my
|
|
-- March 2007, Devesh Pujari, Srinath Candadai
|
|
-- Feb 2011, Suja Thangaveluchamy
|
|
--
|
|
-- Copyright (c) 2007-2012-2018 by Cisco Systems Inc.
|
|
-- All rights reserved.
|
|
-- *******************************************************************
|
|
|
|
CISCO-LWAPP-SYS-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Integer32,
|
|
Counter32,
|
|
Unsigned32,
|
|
IpAddress,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP,
|
|
NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
MacAddress,
|
|
RowStatus,
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
InetAddressType,
|
|
InetAddress,
|
|
InetPortNumber
|
|
FROM INET-ADDRESS-MIB
|
|
cldcClientAccessVLAN
|
|
FROM CISCO-LWAPP-DOT11-CLIENT-MIB
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * MODULE IDENTITY
|
|
-- ********************************************************************
|
|
|
|
ciscoLwappSysMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201807030000Z"
|
|
ORGANIZATION "Cisco Systems Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems,
|
|
Customer Service
|
|
Postal: 170 West Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
Tel: +1 800 553-NETS
|
|
|
|
Email: cs-wnbu-snmp@cisco.com"
|
|
DESCRIPTION
|
|
"This MIB is intended to be implemented on all those
|
|
devices operating as Central controllers, that
|
|
terminate the Light Weight Access Point Protocol
|
|
tunnel from Cisco Light-weight LWAPP Access Points.
|
|
|
|
This MIB provides global configuration and status
|
|
information for the controller. All general system
|
|
related information is presented in this MIB.
|
|
|
|
The relationship between CC and the LWAPP APs
|
|
can be depicted as follows:
|
|
|
|
+......+ +......+ +......+
|
|
+ + + + + +
|
|
+ CC + + CC + + CC +
|
|
+ + + + + +
|
|
+......+ +......+ +......+
|
|
.. . .
|
|
.. . .
|
|
. . . .
|
|
. . . .
|
|
. . . .
|
|
. . . .
|
|
+......+ +......+ +......+ +......+
|
|
+ + + + + + + +
|
|
+ AP + + AP + + AP + + AP +
|
|
+ + + + + + + +
|
|
+......+ +......+ +......+ +......+
|
|
. . .
|
|
. . . .
|
|
. . . .
|
|
. . . .
|
|
. . . .
|
|
+......+ +......+ +......+ +......+
|
|
+ + + + + + + +
|
|
+ MN + + MN + + MN + + MN +
|
|
+ + + + + + + +
|
|
+......+ +......+ +......+ +......+
|
|
|
|
|
|
The LWAPP tunnel exists between the controller and
|
|
the APs. The MNs communicate with the APs through
|
|
the protocol defined by the 802.11 standard.
|
|
|
|
LWAPP APs, upon bootup, discover and join one of the
|
|
controllers and the controller pushes the configuration,
|
|
that includes the WLAN parameters, to the LWAPP APs.
|
|
The APs then encapsulate all the 802.11 frames from
|
|
wireless clients inside LWAPP frames and forward
|
|
the LWAPP frames to the controller.
|
|
|
|
GLOSSARY
|
|
|
|
Access Point ( AP )
|
|
|
|
An entity that contains an 802.11 medium access
|
|
control ( MAC ) and physical layer ( PHY ) interface
|
|
and provides access to the distribution services via
|
|
the wireless medium for associated clients.
|
|
|
|
LWAPP APs encapsulate all the 802.11 frames in
|
|
LWAPP frames and sends them to the controller to which
|
|
it is logically connected.
|
|
|
|
Light Weight Access Point Protocol ( LWAPP )
|
|
|
|
This is a generic protocol that defines the
|
|
communication between the Access Points and the
|
|
Central Controller.
|
|
|
|
Mobile Node ( MN )
|
|
|
|
A roaming 802.11 wireless device in a wireless
|
|
network associated with an access point. Mobile Node
|
|
and client are used interchangeably.
|
|
|
|
Extensible Authentication Protocol ( EAP )
|
|
|
|
EAP is a universal authentication protocol used in
|
|
wireless and PPP networks. It is defined by RFC 3748.
|
|
|
|
EAP-Flexible Authentication ( EAP-FAST )
|
|
|
|
This protocol is used via secure tunneling for 802.1X EAP.
|
|
|
|
PAC
|
|
|
|
PAC (Protected Access Credential) is a meachanism for
|
|
mutual authentication in EAP-FAST.
|
|
|
|
PEAP
|
|
|
|
The Protected Extensible Authentication Protocol, also known
|
|
as Protected EAP or simply PEAP, is a protocol that
|
|
encapsulates EAP within a potentially encrypted and
|
|
authenticated Transport Layer Security (TLS) tunnel.The
|
|
purpose was to correct deficiencies in EAP;
|
|
EAP assumed a protected communication channel, such as that
|
|
provided by physical security, so facilities for protection
|
|
of the EAP conversation were not provided.
|
|
|
|
EAP-SIM
|
|
|
|
EAP for GSM Subscriber Identity Module (EAP-SIM) is used
|
|
for authentication and session key distribution using the
|
|
Subscriber Identity Module (SIM) from the Global System
|
|
for Mobile Communications (GSM).
|
|
|
|
RAID
|
|
|
|
Redudant array of independant disks (RAID) combines multiple
|
|
disk drive components into logical unit for the purposes of
|
|
data redundancy and performance improvements.
|
|
|
|
Lawful-Interception (LI)
|
|
|
|
Lawful Interception is a feature to send client logging
|
|
details to a server.
|
|
|
|
|
|
REFERENCE
|
|
|
|
[1] Wireless LAN Medium Access Control ( MAC ) and
|
|
Physical Layer ( PHY ) Specifications.
|
|
|
|
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
|
|
Weight Access Point Protocol.
|
|
|
|
[3] IEEE 802.1X - Authentication for Wireless and
|
|
Wired Connections."
|
|
REVISION "201807030000Z"
|
|
DESCRIPTION
|
|
"Added following objects
|
|
-clsLiStatus
|
|
-clsLiReportingInterval
|
|
-clsLiAddressType
|
|
-clsLiAddress
|
|
Added new enum yangBundle type for clsUploadFileType object."
|
|
REVISION "201804240000Z"
|
|
DESCRIPTION
|
|
"Added clsTransferStreamingUsername,
|
|
clsTransferStreamingPassword,
|
|
clsTransferStreamingOptimizedJoinEnable,
|
|
clsUSBMode.
|
|
Added new enum value https(4) and sftp(5) to
|
|
clsTransferStreamingMode.
|
|
Added new enum value usb(4) to clsTransferMode."
|
|
REVISION "201705030000Z"
|
|
DESCRIPTION
|
|
"Added ciscoLwappLyncInfoGroup, ciscoLwappSysInfoGroup,
|
|
ciscoLwappSysMulticastMLDGroup, ciscoLwappSysConfigGroupSup1,
|
|
ciscoLwappSysStatsConfigGroup.
|
|
Deprecated ciscoLwappSysMIBComplianceRev2 and replaced
|
|
by ciscoLwappSysMIBComplianceRev3."
|
|
REVISION "201206180000Z"
|
|
DESCRIPTION
|
|
"Added ciscoLwappSysPortConfigGroup,
|
|
ciscoLwappSysSecurityConfigGroup, ciscoLwappSysIgmpConfigGroup,
|
|
ciscoLwappSysSecNotifObjsGroup, ciscoLwappSysNotifsGroup and
|
|
ciscoLwappSysNotifControlGroup.
|
|
Deprecated ciscoLwappSysMIBComplianceRev1 and added
|
|
ciscoLwappSysMIBComplianceRev2"
|
|
REVISION "201002090000Z"
|
|
DESCRIPTION
|
|
"Updated clsTransferConfigGroup, ciscoLwappSysConfigGroupSup1.
|
|
Deprecate ciscoLwappSysMIBCompliance.
|
|
Added clsTransferConfig, clsSysArpProxyEnabled."
|
|
REVISION "200710170000Z"
|
|
DESCRIPTION
|
|
"Added timezone and syslog objects."
|
|
REVISION "200703140000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { ciscoMgmt 618 }
|
|
|
|
|
|
ciscoLwappSysMIBNotifs OBJECT IDENTIFIER
|
|
::= { ciscoLwappSysMIB 0 }
|
|
|
|
ciscoLwappSysMIBObjects OBJECT IDENTIFIER
|
|
::= { ciscoLwappSysMIB 1 }
|
|
|
|
ciscoLwappSysMIBConform OBJECT IDENTIFIER
|
|
::= { ciscoLwappSysMIB 2 }
|
|
|
|
clsConfig OBJECT IDENTIFIER
|
|
::= { ciscoLwappSysMIBObjects 1 }
|
|
|
|
clsConfigDownload OBJECT IDENTIFIER
|
|
::= { clsConfig 2 }
|
|
|
|
clsConfigUpload OBJECT IDENTIFIER
|
|
::= { clsConfig 3 }
|
|
|
|
clsTransferConfigGroup OBJECT IDENTIFIER
|
|
::= { clsConfig 4 }
|
|
|
|
clsConfigGeneral OBJECT IDENTIFIER
|
|
::= { clsConfig 5 }
|
|
|
|
clsConfigNetworkGeneral OBJECT IDENTIFIER
|
|
::= { clsConfigGeneral 5 }
|
|
|
|
clsLiConfigGeneral OBJECT IDENTIFIER
|
|
::= { clsConfigGeneral 7 }
|
|
|
|
clsSyslogIpConfig OBJECT IDENTIFIER
|
|
::= { clsConfig 6 }
|
|
|
|
clsTransferConfig OBJECT IDENTIFIER
|
|
::= { clsConfig 8 }
|
|
|
|
cLSysMulticastIGMP OBJECT IDENTIFIER
|
|
::= { clsConfig 13 }
|
|
|
|
cLSPortModeConfig OBJECT IDENTIFIER
|
|
::= { clsConfig 14 }
|
|
|
|
clsCoreDump OBJECT IDENTIFIER
|
|
::= { clsConfig 15 }
|
|
|
|
cLSysMulticastMLD OBJECT IDENTIFIER
|
|
::= { clsConfig 17 }
|
|
|
|
clsConfigStats OBJECT IDENTIFIER
|
|
::= { clsConfig 18 }
|
|
|
|
clsAlarmObjects OBJECT IDENTIFIER
|
|
::= { clsConfig 19 }
|
|
|
|
clsSysThresholdConfig OBJECT IDENTIFIER
|
|
::= { clsConfig 20 }
|
|
|
|
clsNMHeartBeat OBJECT IDENTIFIER
|
|
::= { clsConfig 21 }
|
|
|
|
cLSTrapSwitchConfig OBJECT IDENTIFIER
|
|
::= { clsConfig 25 }
|
|
|
|
clsConfigCalea OBJECT IDENTIFIER
|
|
::= { clsConfig 34 }
|
|
|
|
clsStatus OBJECT IDENTIFIER
|
|
::= { ciscoLwappSysMIBObjects 2 }
|
|
|
|
clsImageInfo OBJECT IDENTIFIER
|
|
::= { ciscoLwappSysMIBObjects 3 }
|
|
|
|
clsCpuInfo OBJECT IDENTIFIER
|
|
::= { ciscoLwappSysMIBObjects 4 }
|
|
|
|
clsSecurityGroup OBJECT IDENTIFIER
|
|
::= { ciscoLwappSysMIBObjects 5 }
|
|
|
|
ciscoLwappSysMIBNotifObjects OBJECT IDENTIFIER
|
|
::= { ciscoLwappSysMIBObjects 6 }
|
|
|
|
ciscoLwappSysMIBNotifControlObjects OBJECT IDENTIFIER
|
|
::= { ciscoLwappSysMIBObjects 7 }
|
|
|
|
clsSysInfo OBJECT IDENTIFIER
|
|
::= { ciscoLwappSysMIBObjects 8 }
|
|
|
|
clsLyncInfo OBJECT IDENTIFIER
|
|
::= { ciscoLwappSysMIBObjects 9 }
|
|
|
|
clsStreamingTransferConfig OBJECT IDENTIFIER
|
|
::= { clsTransferConfig 2 }
|
|
|
|
|
|
clsDot3BridgeEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether 803.2 bridging
|
|
mode is enabled or disabled on the controller.
|
|
A value of 'true' indicates that, the bridging
|
|
mode is enabled.
|
|
A value of 'false' indicates that, the bridging
|
|
mode is disabled."
|
|
DEFVAL { false }
|
|
::= { clsConfig 1 }
|
|
|
|
clsDownloadFileType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
code(2),
|
|
config(3),
|
|
webAuthCert(4),
|
|
webAdminCert(5),
|
|
signatures(6),
|
|
customWebAuth(7),
|
|
vendorDeviceCert(8),
|
|
vendorCaCert(9),
|
|
ipsecDeviceCert(10),
|
|
ipsecCaCert(11),
|
|
radiusavplist(12),
|
|
icon(13),
|
|
apimage(14),
|
|
naservcacert(15),
|
|
webhookcacert(16)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the file types that
|
|
can be downloaded to the controller.
|
|
The file types for download are:
|
|
unknown - Unknown file type
|
|
code - Code file
|
|
config - Configuration file
|
|
webAuthCert - Web authentication certificates
|
|
webAdminCert - Web administrative certificates
|
|
signatures - Signature file
|
|
customWebAuth - Custom web authentication
|
|
tar file
|
|
vendorDeviceCert - Vendor device certificates
|
|
vendorCaCert - Vendor certificate authority
|
|
certificates
|
|
ipsecDeviceCert - Ipsec device certificates
|
|
ipsecCaCert - Ipsec certificate authority
|
|
certificates
|
|
radiusavplist - Avp's to be sent in radius
|
|
packets
|
|
icon - icon files to be used in
|
|
Hotspot 2.0
|
|
apimage - Download ap image for
|
|
flexexpress
|
|
naservcacert - NA server certificate authority
|
|
certificates
|
|
webhookcacert - Webhook CA Certificate"
|
|
::= { clsConfigDownload 1 }
|
|
|
|
clsDownloadCertificateKey OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the key used
|
|
to encrypt the EAP certificate, specified
|
|
by IEEE 802.1X standard, during upload from
|
|
the controller and for decrypting the file
|
|
after its downloaded to the controller.
|
|
This object is relevant only when
|
|
clsDownloadFileType is 'vendorDeviceCert'.
|
|
For all other values of clsDownloadFileType
|
|
object this will return an empty string."
|
|
::= { clsConfigDownload 2 }
|
|
|
|
clsUploadFileType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
config(2),
|
|
errorLog(3),
|
|
systemTrace(4),
|
|
trapLog(5),
|
|
crashFile(6),
|
|
signatures(7),
|
|
pac(8),
|
|
radioCoreDump(9),
|
|
invalidConfig(10),
|
|
debugfile(11),
|
|
pktCapture(12),
|
|
watchdogCrash(13),
|
|
panicCrash(14),
|
|
vendorDevCert(15),
|
|
vendorCaCert(16),
|
|
webAdminCert(17),
|
|
webAuthCert(18),
|
|
ipsecDeviceCert(19),
|
|
ipsecCaCert(20),
|
|
radiusavplist(21),
|
|
yangBundle(22)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the file types that
|
|
can be uploaded from the controller.
|
|
The file types for upload are:
|
|
unknown - Unknown file
|
|
config - Configuration file
|
|
errorLog - Error log
|
|
systemTrace - System trace
|
|
trapLog - Trap log
|
|
crashFile - Crash file
|
|
signatures - Signature file
|
|
pac - PAC file
|
|
radioCoreDump - AP's Radio core dump file
|
|
invalidConfig - Upload the file which contains the
|
|
invalid configuration commands feeded
|
|
by the downloaded Config file.
|
|
debugfile - Debug file.
|
|
pktCapture - Packet Capture File
|
|
watchdogCrash - Watchdog Crash Information File
|
|
panicCrash - Panic Crash Information File.
|
|
vendorDevCert - EAP ca certificate.
|
|
vendorCaCert - EAP dev certificate.
|
|
webAdminCert - Web Admin certificate.
|
|
webAuthCert - Web Auth certificate.
|
|
ipsecDeviceCert - Ipsec device certificates
|
|
ipsecCaCert - Ipsec certificate authority
|
|
certificates
|
|
radiusavplist - Avp's to be sent in radius
|
|
packets.
|
|
yangBundle - Bundle of yang files."
|
|
::= { clsConfigUpload 1 }
|
|
|
|
clsUploadPacUsername OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the upload user name
|
|
for protected access credential (PAC). This
|
|
object needs to be set before setting
|
|
clsUploadFileType to 'pac'. For all other
|
|
values of clsUploadFileType this will return
|
|
an empty string."
|
|
::= { clsConfigUpload 2 }
|
|
|
|
clsUploadPacPassword OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the upload password for
|
|
protected access credential (PAC). This object
|
|
needs to be set before setting clsUploadFileType
|
|
to 'pac'. For all other values of clsUploadFileType
|
|
this will return an empty string.
|
|
When read, this object will return '****'."
|
|
::= { clsConfigUpload 3 }
|
|
|
|
clsUploadPacValidity OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
UNITS "days"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the upload validity in
|
|
days for protected access credential (PAC).
|
|
This object is relevant only when
|
|
clsUploadFileType is set to 'pac'.
|
|
For all other values of clsUploadFileType
|
|
this will return an empty string."
|
|
::= { clsConfigUpload 4 }
|
|
-- ******************************************************
|
|
-- Network Route config table
|
|
-- ******************************************************
|
|
|
|
clsNetworkRouteConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ClsNetworkRouteConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represents of the network route
|
|
entries of a switch."
|
|
::= { clsConfigNetworkGeneral 1 }
|
|
|
|
clsNetworkRouteConfigEntry OBJECT-TYPE
|
|
SYNTAX ClsNetworkRouteConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry in this table represents the network
|
|
route of a switch."
|
|
INDEX {
|
|
clsNetworkRouteIPAddressType,
|
|
clsNetworkRouteIPAddress
|
|
}
|
|
::= { clsNetworkRouteConfigTable 1 }
|
|
|
|
ClsNetworkRouteConfigEntry ::= SEQUENCE {
|
|
clsNetworkRouteIPAddressType InetAddressType,
|
|
clsNetworkRouteIPAddress InetAddress,
|
|
clsNetworkRoutePrefixLength Unsigned32,
|
|
clsNetworkRouteGatewayType InetAddressType,
|
|
clsNetworkRouteGateway InetAddress,
|
|
clsNetworkRouteStatus RowStatus
|
|
}
|
|
|
|
clsNetworkRouteIPAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects represents network route IP
|
|
address type."
|
|
::= { clsNetworkRouteConfigEntry 1 }
|
|
|
|
clsNetworkRouteIPAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects represents the network route IP
|
|
address."
|
|
::= { clsNetworkRouteConfigEntry 2 }
|
|
|
|
clsNetworkRoutePrefixLength OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the prefix length for
|
|
route Inet address."
|
|
::= { clsNetworkRouteConfigEntry 3 }
|
|
|
|
clsNetworkRouteGatewayType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies gateway IP type
|
|
of network route."
|
|
::= { clsNetworkRouteConfigEntry 4 }
|
|
|
|
clsNetworkRouteGateway OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies gateway IP
|
|
of network route."
|
|
::= { clsNetworkRouteConfigEntry 5 }
|
|
|
|
clsNetworkRouteStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies status column for this
|
|
row and used to create and delete specific
|
|
instances of rows in this table."
|
|
::= { clsNetworkRouteConfigEntry 6 }
|
|
|
|
|
|
|
|
clsTransferConfigFileEncryption OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies encryption and decryption
|
|
of configuration file while uploading and
|
|
downloading.
|
|
A value of disable(1) indicates that, encryption
|
|
is disabled.
|
|
A value of enable(2) indicates that, encryption
|
|
is enabled.
|
|
This is applicable only when clsDownloadFileType,
|
|
clsUploadFileType is set to Config."
|
|
DEFVAL { disable }
|
|
::= { clsTransferConfigGroup 1 }
|
|
|
|
clsTransferConfigFileEncryptionKey OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the key to be used when encrypting
|
|
the configuration file while upload from the controller
|
|
or while decrypting the file after download to the controller.
|
|
This is applicable only when clsDownloadFileType,
|
|
clsUploadFileType is set to Config.
|
|
When read, this object will return '****'."
|
|
::= { clsTransferConfigGroup 2 }
|
|
-- ******************************************************
|
|
-- Transfer config table
|
|
-- ******************************************************
|
|
|
|
clsTransferConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ClsTransferConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represent the server details which
|
|
will be used by the controller to upload/
|
|
download files. The conceptual rows are
|
|
statically populated by the agent during
|
|
system boot up."
|
|
::= { clsTransferConfig 1 }
|
|
|
|
clsTransferConfigEntry OBJECT-TYPE
|
|
SYNTAX ClsTransferConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry in this table provides information about
|
|
the server to which the controller will upload/download files
|
|
represented by clsTransferType and clsTransferMode."
|
|
INDEX {
|
|
clsTransferType,
|
|
clsTransferMode
|
|
}
|
|
::= { clsTransferConfigTable 1 }
|
|
|
|
ClsTransferConfigEntry ::= SEQUENCE {
|
|
clsTransferType INTEGER,
|
|
clsTransferMode INTEGER,
|
|
clsTransferServerAddressType InetAddressType,
|
|
clsTransferServerAddress InetAddress,
|
|
clsTransferPath SnmpAdminString,
|
|
clsTransferFilename SnmpAdminString,
|
|
clsTransferFtpUsername SnmpAdminString,
|
|
clsTransferFtpPassword SnmpAdminString,
|
|
clsTransferFtpPortNum InetPortNumber,
|
|
clsTransferTftpMaxRetries Unsigned32,
|
|
clsTransferTftpTimeout Unsigned32,
|
|
clsTransferStart INTEGER,
|
|
clsTransferStatus INTEGER,
|
|
clsTransferStatusString SnmpAdminString
|
|
}
|
|
|
|
clsTransferType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
download(1),
|
|
upload(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the type of operation
|
|
mode of the server by the controller.
|
|
A value of download indicates that, mode of transfer
|
|
is download
|
|
A value of upload indicates that, mode of transfer
|
|
is upload."
|
|
DEFVAL { download }
|
|
::= { clsTransferConfigEntry 1 }
|
|
|
|
clsTransferMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tftp(1),
|
|
ftp(2),
|
|
sftp(3),
|
|
usb(4)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the protocol used by the server and the
|
|
controller to transfer a file.
|
|
A value of tftp indicates that, transfer mode is tftp.
|
|
A value of ftp indicates that, transfer mode is ftp.
|
|
A value of sftp indicates that, transfer mode is sftp.
|
|
A value of usb indicates that, transfer mode is usb."
|
|
DEFVAL { tftp }
|
|
::= { clsTransferConfigEntry 2 }
|
|
|
|
clsTransferServerAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the server IP address
|
|
type to which the controller will transfer
|
|
the file."
|
|
::= { clsTransferConfigEntry 3 }
|
|
|
|
clsTransferServerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the server IP address
|
|
to which the controller will transfer the file.
|
|
It is governed by clsTransferServerAddressType."
|
|
::= { clsTransferConfigEntry 4 }
|
|
|
|
clsTransferPath OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the directory path for file transfer.
|
|
The format depends on the host server.
|
|
e.g. /tftpboot/code/ - in case of UNIX server
|
|
c:\tftp\code - in case of DOS/Windows server"
|
|
::= { clsTransferConfigEntry 5 }
|
|
|
|
clsTransferFilename OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the file name for the file being
|
|
transferred from the controller.
|
|
An example would be file path set to c:\tftp\code\
|
|
and file name set to e1r1v1.opr."
|
|
::= { clsTransferConfigEntry 6 }
|
|
|
|
clsTransferFtpUsername OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the FTP username for
|
|
transferring file on the server.
|
|
This is valid for FTP/SFTP transfer mode
|
|
parameters."
|
|
::= { clsTransferConfigEntry 7 }
|
|
|
|
clsTransferFtpPassword OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the FTP password for
|
|
transferring file on the server.
|
|
This is valid for SFTP/FTP transfer mode
|
|
parameters. It returns '****' when queried."
|
|
::= { clsTransferConfigEntry 8 }
|
|
|
|
clsTransferFtpPortNum OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the port number to be used by
|
|
the FTP protocol while connecting to the server.
|
|
This is valid only for FTP transfer mode."
|
|
::= { clsTransferConfigEntry 9 }
|
|
|
|
clsTransferTftpMaxRetries OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies maximum number of retries to be
|
|
allowed for a TFTP message packet before aborting the
|
|
transfer operation. This is valid only for TFTP transfer
|
|
mode."
|
|
DEFVAL { 10 }
|
|
::= { clsTransferConfigEntry 10 }
|
|
|
|
clsTransferTftpTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..254)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies timeout in seconds for a TFTP message
|
|
packet. This is valid only for TFTP transfer mode."
|
|
DEFVAL { 6 }
|
|
::= { clsTransferConfigEntry 11 }
|
|
|
|
clsTransferStart OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
initiate(2),
|
|
initiatePeer(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the file transfer
|
|
operation is initiated in active or standby.
|
|
A value of none indicates that, no operation begins.
|
|
A value of initiate indicates that, transfer of
|
|
file begins on active.
|
|
A value of initiatePeer indicates that, file transfer
|
|
operation begins on standby."
|
|
DEFVAL { none }
|
|
::= { clsTransferConfigEntry 12 }
|
|
|
|
clsTransferStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
notInitiated(2),
|
|
transferStarting(3),
|
|
errorStarting(4),
|
|
wrongFileType(5),
|
|
updatingConfig(6),
|
|
invalidConfigFile(7),
|
|
writingToFlash(8),
|
|
failureWritingToFlash(9),
|
|
checkingCRC(10),
|
|
failedCRC(11),
|
|
unknownDirection(12),
|
|
transferSuccessful(13),
|
|
transferFailed(14),
|
|
bootBreakOff(15),
|
|
invalidTarFile(16)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the current status of a file
|
|
transfer operation.
|
|
The following are valid only when clsTransferType is
|
|
'download' :- bootBreakOff(14), invalidTarFile(15).
|
|
A value of unknown(1) indicates that, unknown state
|
|
of transfer.
|
|
A value of notInitiated(2) indicates that, no transfer
|
|
operation has been initiated
|
|
A value of transferStarting(3) indicates that, transfer
|
|
operation has commenced.
|
|
A value of errorStarting(4) indicates that, error while
|
|
starting transfer operation.
|
|
A value of wrongFileType(5) indicates that, wrong file
|
|
type specified.
|
|
A value of updatingConfig(6) indicates that, updating
|
|
configuration.
|
|
A value of invalidConfigFile(7) indicates that, invalid
|
|
config file specified.
|
|
A value of writingToFlash(8) indicates that, writing to
|
|
flash
|
|
A value of failureWritingToFlash(9) indicates that, writing
|
|
to flash failed.
|
|
A value of checkingCRC(10) indicates that, checking cyclic
|
|
redundancy check.
|
|
A value of failedCRC(11) indicates that, CRC check failed.
|
|
A value of unknownDirection(12) indicates that, unknown
|
|
direction of transfer.
|
|
A value of transferSuccessful(13) indicates that, transfer
|
|
operation succeeded.
|
|
A value of transferFailed(14) indicates that, transfer
|
|
failed.
|
|
A value of bootBreakOff(15) indicates that, Boot break
|
|
off.
|
|
A value of invalidTarFile(16) indicates that, invalid Tar
|
|
file."
|
|
DEFVAL { unknown }
|
|
::= { clsTransferConfigEntry 13 }
|
|
|
|
clsTransferStatusString OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the current status of a file
|
|
transfer operation in human readable format."
|
|
::= { clsTransferConfigEntry 14 }
|
|
|
|
|
|
-- EUR ADD
|
|
-- ******************************************************
|
|
-- Ap Transfer config table
|
|
-- ******************************************************
|
|
|
|
clsApTransferTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ClsApTransferEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represents the information about the
|
|
802.11 LWAPP Access Points that have joined to
|
|
the controller.
|
|
LWAPP APs exchange configuration messages with the
|
|
controller and get the required configuration for
|
|
their 802.11 related operations, after they join the
|
|
controller."
|
|
::= { clsStreamingTransferConfig 1 }
|
|
|
|
clsApTransferEntry OBJECT-TYPE
|
|
SYNTAX ClsApTransferEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry in this table provides information about
|
|
one 802.11 LWAPP Access Point that has joined to
|
|
the controller.
|
|
Entries are removed when the APs lose their
|
|
association with the controller due to loss
|
|
of communication."
|
|
INDEX { clsApTransferSysMacAddress }
|
|
::= { clsApTransferTable 1 }
|
|
|
|
ClsApTransferEntry ::= SEQUENCE {
|
|
clsApTransferSysMacAddress MacAddress,
|
|
clsApPrimaryVers SnmpAdminString,
|
|
clsApBackupVers SnmpAdminString,
|
|
clsApPredStatus SnmpAdminString,
|
|
clsApPredFailReason SnmpAdminString,
|
|
clsApPredRetryCount Unsigned32,
|
|
clsApPredNextRetryTime SnmpAdminString
|
|
}
|
|
|
|
clsApTransferSysMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the radio MAC address
|
|
of the AP and uniquely identifies an entry in
|
|
this table."
|
|
::= { clsApTransferEntry 1 }
|
|
|
|
clsApPrimaryVers OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the primary image version of AP"
|
|
::= { clsApTransferEntry 2 }
|
|
|
|
clsApBackupVers OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the backup image version of AP"
|
|
::= { clsApTransferEntry 3 }
|
|
|
|
clsApPredStatus OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the status of predownload,
|
|
Initiated/failed/predownloading/backedoff"
|
|
::= { clsApTransferEntry 4 }
|
|
|
|
clsApPredFailReason OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents Failure reason for image download."
|
|
::= { clsApTransferEntry 5 }
|
|
|
|
clsApPredRetryCount OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..254)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents number of retries by AP to download
|
|
the image"
|
|
::= { clsApTransferEntry 6 }
|
|
|
|
clsApPredNextRetryTime OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the next retry time of
|
|
image download by AP."
|
|
::= { clsApTransferEntry 7 }
|
|
|
|
|
|
|
|
clsTransferStreamingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tftp(1),
|
|
http(2),
|
|
cco(3),
|
|
https(4),
|
|
sftp(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the mode of transfer used
|
|
by the controller with the server.
|
|
A value of tftp indicates that, streaming mode
|
|
is TFTP.
|
|
A value of http indicates that, streaming mode
|
|
is http.
|
|
A value of cco indicates that, streaming mode
|
|
is cco.
|
|
A value of https indicates that, streaming mode
|
|
is https.
|
|
A value of sftp indicates that, streaming mode
|
|
is sftp."
|
|
DEFVAL { tftp }
|
|
::= { clsStreamingTransferConfig 2 }
|
|
|
|
clsTransferStreamingServerAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the server IP address
|
|
type from which the controller will transfer
|
|
the image file."
|
|
DEFVAL { ipv4 }
|
|
::= { clsStreamingTransferConfig 3 }
|
|
|
|
clsTransferStreamingServerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the server IP address to
|
|
which the controller will transfer the file."
|
|
::= { clsStreamingTransferConfig 4 }
|
|
|
|
clsTransferStreamingPath OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the directory path
|
|
for file transfer. The controller remembers
|
|
the last file path used."
|
|
::= { clsStreamingTransferConfig 5 }
|
|
|
|
clsStreamingTransferStart OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
initiate(1),
|
|
none(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the file transfer
|
|
operation started or not.
|
|
A value of initiate(1) indicates that, the transfer
|
|
operation is started.
|
|
A value of none(2) indicates that, no operation is
|
|
started"
|
|
DEFVAL { none }
|
|
::= { clsStreamingTransferConfig 6 }
|
|
|
|
clsTransferHttpStreamingUsername OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies username of CCO server.
|
|
Specific to http/cco mode"
|
|
::= { clsStreamingTransferConfig 7 }
|
|
|
|
clsTransferHttpStreamingPassword OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies password of CCO server.
|
|
Specific to http/cco mode"
|
|
::= { clsStreamingTransferConfig 8 }
|
|
|
|
clsTransferHttpStreamingSuggestedVersion OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents suggested image version to
|
|
be downloaded from CCO.Specific to http/cco mode"
|
|
::= { clsStreamingTransferConfig 9 }
|
|
|
|
clsTransferHttpStreamingLatestVersion OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents latest image version to
|
|
be downloaded from CCO.Specific to http/cco mode"
|
|
::= { clsStreamingTransferConfig 10 }
|
|
|
|
clsTransferHttpStreamingCcoPoll OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents recent CCO Polled time"
|
|
::= { clsStreamingTransferConfig 11 }
|
|
|
|
clsTransferStreamingServerPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents streaming server port
|
|
for https/sftp"
|
|
::= { clsStreamingTransferConfig 12 }
|
|
|
|
clsTransferStreamingUsername OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies username of server.
|
|
Specific to https/sftp mode"
|
|
::= { clsStreamingTransferConfig 13 }
|
|
|
|
clsTransferStreamingPassword OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies password of server.
|
|
Specific to https/sftp mode"
|
|
::= { clsStreamingTransferConfig 14 }
|
|
|
|
clsTransferStreamingOptimizedJoinEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specified the state of the optimized
|
|
join feature."
|
|
::= { clsStreamingTransferConfig 15 }
|
|
|
|
-- ******************************************************
|
|
-- Time configuration of controller
|
|
-- ******************************************************
|
|
|
|
clsTimeZone OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies timezone for the controller.
|
|
Enter the timezone location index.
|
|
1. (GMT-12:00) International Date Line West
|
|
2. (GMT-11:00) Samoa
|
|
3. (GMT-10:00) Hawaii
|
|
4. (GMT -9:00) Alaska
|
|
5. (GMT -8:00) Pacific Time (US and Canada)
|
|
6. (GMT -7:00) Mountain Time (US and Canada)
|
|
7. (GMT -6:00) Central Time (US and Canada)
|
|
8. (GMT -5:00) Eastern Time (US and Canada)
|
|
9. (GMT -4:00) Altantic Time (Canada)
|
|
10. (GMT -3:00) Buenos Aires (Agentina)
|
|
11. (GMT -2:00) Mid-Atlantic
|
|
12. (GMT -1:00) Azores
|
|
13. (GMT) London, Lisbon, Dublin, Edinburgh
|
|
14. (GMT +1:00) Amsterdam, Berlin, Rome, Vienna
|
|
15. (GMT +2:00) Jerusalem
|
|
16. (GMT +3:00) Baghdad
|
|
17. (GMT +4:00) Muscat, Abu Dhabi
|
|
18. (GMT +4:30) Kabul
|
|
19. (GMT +5:00) Karachi, Islamabad, Tashkent
|
|
20. (GMT +5:30) Colombo, Kolkata, Mumbai, New Delhi
|
|
21. (GMT +5:45) Katmandu
|
|
22. (GMT +6:00) Almaty, Novosibirsk
|
|
23. (GMT +6:30) Rangoon
|
|
24. (GMT +7:00) Saigon, Hanoi, Bangkok, Jakatar
|
|
25. (GMT +8:00) HongKong, Bejing, Chongquing
|
|
26. (GMT +9:00) Tokyo, Osaka, Sapporo
|
|
27. (GMT +9:30) Darwin
|
|
28. (GMT+10:00) Sydney, Melbourne, Canberra
|
|
29. (GMT+11:00) Magadan, Solomon Is., New Caledonia
|
|
30. (GMT+12:00) Kamchatka, Marshall Is., Fiji"
|
|
::= { clsConfigGeneral 1 }
|
|
|
|
clsTimeZoneDescription OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the timezone description
|
|
for the controller."
|
|
::= { clsConfigGeneral 2 }
|
|
|
|
clsMaxClientsTrapThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "Percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the threshold for number
|
|
of clients on the controller to trigger a trap.
|
|
The trap ciscoLwappMaxClientsReached
|
|
will be triggered once the count of clients
|
|
on the controller reaches this limit and the
|
|
clsMaxClientsTrapEnabled is enabled."
|
|
::= { clsConfigGeneral 3 }
|
|
|
|
clsMaxRFIDTagsTrapThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "Percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the threshold for number
|
|
of RFID tags on the controller to trigger a trap.
|
|
The trap ciscoLwappMaxRFIDTagsReached
|
|
will be triggered once the count of RFID tags
|
|
on the controller reaches this limit and the
|
|
clsMaxRFIDTagsTrapEnabled is enabled."
|
|
::= { clsConfigGeneral 4 }
|
|
|
|
clsSensorTemperature OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
UNITS "Centigrade"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents current internal temperature of
|
|
the unit in Centigrade"
|
|
::= { clsConfigGeneral 6 }
|
|
|
|
-- ******************************************************
|
|
-- Lawful Interception Configuration
|
|
-- ******************************************************
|
|
|
|
clsLiStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether lawful intercept is enabled
|
|
for the flexconnect access points connected to the
|
|
wireless LAN Controller.
|
|
A value of 'true' indicates that lawful intercept is
|
|
enabled.
|
|
A value of 'false' indicates that lawful intercept is
|
|
disabled.
|
|
This config is applicable for flexconnect access points."
|
|
DEFVAL { false }
|
|
::= { clsLiConfigGeneral 1 }
|
|
|
|
clsLiReportingInterval OBJECT-TYPE
|
|
SYNTAX TimeInterval
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the interval at which AP needs to
|
|
send LI statistical information to the WLC. Interval is in the
|
|
range of 60 - 600 seconds.
|
|
This config is applicable for flexconnect access points."
|
|
DEFVAL { 60 }
|
|
::= { clsLiConfigGeneral 2 }
|
|
|
|
clsLiAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IP address type of the syslog
|
|
server to which the LI statistics will be sent.
|
|
This config is applicable for flexconnect access points."
|
|
::= { clsLiConfigGeneral 3 }
|
|
|
|
clsLiAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IP address of the syslog server
|
|
to which LI statistics needs to be sent.
|
|
This config is applicable for flexconnect access points."
|
|
::= { clsLiConfigGeneral 4 }
|
|
-- ******************************************************
|
|
-- syslog configuration Table
|
|
-- ******************************************************
|
|
|
|
cLSysLogConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CLSysLogConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represents multiple syslog servers to
|
|
which the the syslog messages will be sent to by the
|
|
controller."
|
|
::= { clsSyslogIpConfig 1 }
|
|
|
|
cLSysLogConfigEntry OBJECT-TYPE
|
|
SYNTAX CLSysLogConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry in this table provides information about
|
|
the host to which the syslog messages will be sent to."
|
|
INDEX { cLSysLogServerIndex }
|
|
::= { cLSysLogConfigTable 1 }
|
|
|
|
CLSysLogConfigEntry ::= SEQUENCE {
|
|
cLSysLogServerIndex Unsigned32,
|
|
cLSysLogAddressType InetAddressType,
|
|
cLSysLogAddress InetAddress,
|
|
cLSysLogHostRowStatus RowStatus
|
|
}
|
|
|
|
cLSysLogServerIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the index of the host to
|
|
which syslog messages will be sent."
|
|
::= { cLSysLogConfigEntry 1 }
|
|
|
|
cLSysLogAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the IP address type of
|
|
the host to which syslog messages will be sent.
|
|
'DNS' is used when the hostname of the server
|
|
is configured."
|
|
::= { cLSysLogConfigEntry 2 }
|
|
|
|
cLSysLogAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IP address or hostname
|
|
of the host to which syslog messages will be sent."
|
|
::= { cLSysLogConfigEntry 3 }
|
|
|
|
cLSysLogHostRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the status column for this row and is used
|
|
to create and delete specific instances of rows in
|
|
this table."
|
|
::= { cLSysLogConfigEntry 4 }
|
|
|
|
|
|
|
|
cLSysArpUnicastEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether ARP unicast
|
|
is enabled or disabled on the controller.
|
|
A value of 'true' indicates that, the ARP
|
|
unicast is enabled.
|
|
A value of 'false' indicates that, the ARP
|
|
unicast is disabled."
|
|
DEFVAL { false }
|
|
::= { clsConfig 7 }
|
|
|
|
cLSysBroadcastForwardingEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether broadcast forwarding
|
|
is enabled or disabled on the controller.
|
|
A value of 'true' indicates that, the broadcast
|
|
forwarding is enabled.
|
|
A value of 'false' indicates that, the broadcast
|
|
forwarding is disabled."
|
|
DEFVAL { false }
|
|
::= { clsConfig 9 }
|
|
|
|
cLSysLagModeEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether Link Aggregation(LAG)
|
|
mode is enabled or disabled on the controller.
|
|
A value of 'true' indicates that, the LAG mode
|
|
is enabled.
|
|
A value of 'false' indicates that, the LAG mode
|
|
is disabled on the controller."
|
|
DEFVAL { false }
|
|
::= { clsConfig 10 }
|
|
|
|
clsConfigProductBranchVersion OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..30))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the branch name of the specific
|
|
controller branch. For Mesh branches, this string has
|
|
the value M(Mesh). Zero length string is returned if
|
|
there is no branch name. This string is append to the
|
|
product version for display purposes. For example,
|
|
if the mesh product version is 4.1.191.10, a manager
|
|
application may the version string as 4.1.191.10M
|
|
(Mesh)"
|
|
::= { clsConfig 11 }
|
|
|
|
clsConfigDhcpProxyEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the DHCP proxy
|
|
option is enabled or disabled.
|
|
A value of 'true' indicates that, the proxy option
|
|
is enabled on the controller.
|
|
A value of 'false' indicates that, the proxy option
|
|
is disabled on the controller."
|
|
DEFVAL { false }
|
|
::= { clsConfig 12 }
|
|
|
|
-- ******************************************************
|
|
-- IGMP configuration Table
|
|
-- ******************************************************
|
|
|
|
cLSysMulticastIGMPSnoopingEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether Multicast IGMP Snooping
|
|
is enabled or disabled on the controller.
|
|
A value of 'true' indicates that the Multicast IGMP
|
|
Snooping is enabled. To enable this,
|
|
agentNetworkMulticastMode/clsConfigMulticastEnabled
|
|
must not be in disabled state.
|
|
A value of 'false' indicates that the Multicast IGMP
|
|
Snooping is disabled on the controller."
|
|
DEFVAL { false }
|
|
::= { cLSysMulticastIGMP 1 }
|
|
|
|
cLSysMulticastIGMPSnoopingTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "Seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IGMP timeout, in seconds.
|
|
To set this value, cLSysMulticastIGMPSnoopingEnabled
|
|
must be set to true. When the timeout expires, the
|
|
controller sends a query on all WLANs, causing all
|
|
clients that are listening to a multicast group to
|
|
send a packet back to the controller."
|
|
::= { cLSysMulticastIGMP 2 }
|
|
|
|
cLSysMulticastIGMPQueryInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "Seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IGMP query interval, in seconds.
|
|
To set this value, cLSysMulticastIGMPSnoopingEnabled must
|
|
be set to true."
|
|
::= { cLSysMulticastIGMP 3 }
|
|
|
|
cLSysMulticastLLBridgingStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether link local is enabled
|
|
or disabled on the controller.
|
|
A value of 'true' indicates that the link local is
|
|
enabled.
|
|
A value of 'false' indicates that the link local is
|
|
disabled on the controller."
|
|
DEFVAL { false }
|
|
::= { cLSysMulticastIGMP 4 }
|
|
-- stats-timer config.
|
|
--
|
|
|
|
-- ********************************************************************
|
|
-- clsPortModeConfigTable
|
|
-- ********************************************************************
|
|
|
|
clsPortModeConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ClsPortModeConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represents the entries for physical port related
|
|
parameters."
|
|
::= { cLSPortModeConfig 1 }
|
|
|
|
clsPortModeConfigEntry OBJECT-TYPE
|
|
SYNTAX ClsPortModeConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains the switch's physical port,
|
|
phyical mode related attribues. Each entry exists
|
|
for available physical interface. Entries
|
|
cannot be created or deleted by the user."
|
|
INDEX { clsPortDot1dBasePort }
|
|
::= { clsPortModeConfigTable 1 }
|
|
|
|
ClsPortModeConfigEntry ::= SEQUENCE {
|
|
clsPortDot1dBasePort Unsigned32,
|
|
clsPortModePhysicalMode INTEGER,
|
|
clsPortModePhysicalStatus INTEGER,
|
|
clsPortModeSfpType SnmpAdminString,
|
|
clsPortUpDownCount Counter32,
|
|
clsPortModeMaxSpeed INTEGER
|
|
}
|
|
|
|
clsPortDot1dBasePort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents unique unsigned integer value
|
|
which identifies the base port number."
|
|
::= { clsPortModeConfigEntry 1 }
|
|
|
|
clsPortModePhysicalMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
autoNegotiate(1),
|
|
half10(2),
|
|
full10(3),
|
|
half100(4),
|
|
full100(5),
|
|
full1000sx(6),
|
|
half1000(7),
|
|
full1000(8),
|
|
half10000(9),
|
|
full10000(10)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the speed mode of switch port.
|
|
A value of autoNegotiate indicates that, port senses
|
|
speed and negotiates with the port at the other end
|
|
of the link for data transfer operation
|
|
A value of half10 indicates that, port operates at
|
|
10mbps half duplex speed.
|
|
A value of full10 indicates that, port operates at
|
|
10mbps full duplex speed.
|
|
A value of half100 indicates that, port operates at
|
|
100mbps half duplex speed.
|
|
A value of full100 indicates that, port operates at
|
|
100mbps full duplex speed.
|
|
A value of full1000sx indicates that, port operates at
|
|
1000mbps full duplex speed over multi mode fiber.
|
|
A value of half1000 indicates that, port operates at
|
|
1000mbps half duplex speed.
|
|
A value of full1000 indicates that, port operates at
|
|
1000mbps full duplex speed.
|
|
A value of half10000 indicates that, port operates at
|
|
10000mbps half duplex speed.
|
|
A value of full10000 indicates that, port operates at
|
|
10000mbps full duplex speed."
|
|
DEFVAL { autoNegotiate }
|
|
::= { clsPortModeConfigEntry 2 }
|
|
|
|
clsPortModePhysicalStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
autonegotiate(2),
|
|
half10(3),
|
|
full10(4),
|
|
half100(5),
|
|
full100(6),
|
|
full1000sx(7),
|
|
half1000(8),
|
|
full1000(9),
|
|
half10000(10),
|
|
full10000(11),
|
|
half2500(12),
|
|
full2500(13),
|
|
half5000(14),
|
|
full5000(15)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the switch port's current physical
|
|
speed status.
|
|
A value of unknown indicates that, the speed of the
|
|
port is not known
|
|
A value of autoNegotiate indicates that, port senses
|
|
speed and negotiates with the port at the other end
|
|
of the link for data transfer operation
|
|
A value of half10 indicates that, port operates at
|
|
10mbps half duplex speed.
|
|
A value of full10 indicates that, port operates at
|
|
10mbps full duplex speed.
|
|
A value of half100 indicates that, port operates at
|
|
100mbps half duplex speed.
|
|
A value of full100 indicates that, port operates at
|
|
100mbps full duplex speed
|
|
A value of full1000sx indicates that, port operates at
|
|
1000mbps full duplex speed over multi mode fiber.
|
|
A value of half1000 indicates that, port operates at
|
|
1000mbps half duplex speed.
|
|
A value of full1000 indicates that, port operates at
|
|
1000mbps full duplex speed.
|
|
A value of half2500 indicates that, port operates at
|
|
2500mbps half duplex speed.
|
|
A value of full2500 indicates that, port operates at
|
|
2500mbps full duplex speed.
|
|
A value of half5000 indicates that, port operates at
|
|
5000mbps half duplex speed.
|
|
A value of full5000 indicates that, port operates at
|
|
5000mbps full duplex speed.
|
|
A value of half10000 indicates that, port operates at
|
|
10000mbps half duplex speed.
|
|
A value of full10000 indicates that, port operates at
|
|
10000mbps full duplex speed."
|
|
DEFVAL { unknown }
|
|
::= { clsPortModeConfigEntry 3 }
|
|
|
|
clsPortModeSfpType OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the SFP type of the port.
|
|
When there is no SFP connected to the port, the
|
|
string is represented with value as Not Present."
|
|
::= { clsPortModeConfigEntry 4 }
|
|
|
|
clsPortUpDownCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the total number of
|
|
up/down count of the port. Every time the
|
|
value of ifOperStatus is changed, this MIB
|
|
object should be incremented."
|
|
::= { clsPortModeConfigEntry 5 }
|
|
|
|
clsPortModeMaxSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
autonegotiate(1),
|
|
full1000(2),
|
|
full2500(3),
|
|
full5000(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the maxspeed mode of MGIG port.
|
|
A value of full1000 indicates that, port will operate
|
|
at maximum autonegotiated speed of 1000mbps or less.
|
|
A value of full2500 indicates that, port will operate
|
|
at maximum autonegotiated speed of 2500mbps or less.
|
|
A value of full5000 indicates that, port will operate
|
|
at maximum autonegotiated speed of 5000mbps or less."
|
|
DEFVAL { autonegotiate }
|
|
::= { clsPortModeConfigEntry 6 }
|
|
|
|
|
|
|
|
-- ********************************************************************
|
|
-- core dump configuration
|
|
-- ********************************************************************
|
|
|
|
clsCoreDumpTransferEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the core dump
|
|
file transfer is enabled or disabled.
|
|
A value of 'true' indicates that, the core dump
|
|
file transfer is enabled.
|
|
A value of 'false' indicates that , the core dump
|
|
file transfer is disabled"
|
|
DEFVAL { false }
|
|
::= { clsCoreDump 1 }
|
|
|
|
clsCoreDumpTransferMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
ftp(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the Core Dump Transfer Mode.
|
|
A value 'unknown' cannot be set.
|
|
A value of ftp indicates that, mode is ftp.
|
|
FTP attributes clsCoreDumpServerIpAddress,
|
|
clsCoreDumpFileName, clsCoreDumpUserName, clsCoreDumpPassword
|
|
can be set.
|
|
unknown when the value of clsCoreDumpTransferEnable
|
|
is disabled."
|
|
DEFVAL { ftp }
|
|
::= { clsCoreDump 2 }
|
|
|
|
clsCoreDumpServerIPAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IP address type of the server."
|
|
::= { clsCoreDump 3 }
|
|
|
|
clsCoreDumpServerIPAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IP address of the server where the
|
|
core-dump will be uploaded. The type of this address is
|
|
determined by the value of clsCoreDumpServerIpAddressType
|
|
object."
|
|
::= { clsCoreDump 4 }
|
|
|
|
clsCoreDumpFileName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the filename of the core-dump by which
|
|
it gets uploaded on the server."
|
|
::= { clsCoreDump 5 }
|
|
|
|
clsCoreDumpUserName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the login name at the FTP server."
|
|
::= { clsCoreDump 6 }
|
|
|
|
clsCoreDumpPassword OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the login password of the FTP server."
|
|
::= { clsCoreDump 7 }
|
|
|
|
clsConfigMulticastEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether global multicast is
|
|
enabled or disabled.
|
|
A value of 'true' indicates that the multicast option is
|
|
enabled on the controller.
|
|
A value of 'false' indicates that the multicast option is
|
|
disabled on the controller."
|
|
DEFVAL { false }
|
|
::= { clsConfig 16 }
|
|
|
|
clsConfigArpUnicastEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether arp is forwarded in
|
|
unicast format or the default mode of Multicast.
|
|
A value of 'true' indicates that, the arp packets
|
|
for passive client will be unicasted.
|
|
A value of 'false' indicates that, the arp-packets
|
|
will be sent based on the config of multicast mode
|
|
multicast/unicast."
|
|
DEFVAL { false }
|
|
::= { clsConfig 37 }
|
|
|
|
-- ********************************************************************
|
|
-- Multicast MLDSnooping configuration
|
|
-- ********************************************************************
|
|
|
|
cLSysMulticastMLDSnoopingEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether multicast MLD Snooping is enabled
|
|
or disabled on the controller.
|
|
A value of 'true' indicates that the multicast MLD Snooping
|
|
is enabled. To enable this, agentNetworkMulticastMode/
|
|
clsConfigMulticastEnabled must not be in disabled state.
|
|
A value of 'false' indicates that the multicast MLD Snooping
|
|
is disabled on the controller."
|
|
DEFVAL { false }
|
|
::= { cLSysMulticastMLD 1 }
|
|
|
|
cLSysMulticastMLDSnoopingTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "Seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the MLD timeout, in seconds.
|
|
To set this value, cLSysMulticastMLDSnoopingEnabled
|
|
must be set to True. When the timeout expires, the
|
|
controller sends a query on all WLANs, causing all
|
|
clients that are listening to a multicast group to
|
|
send a packet back to the controller."
|
|
DEFVAL { 60 }
|
|
::= { cLSysMulticastMLD 2 }
|
|
|
|
cLSysMulticastMLDQueryInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "Seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the MLD query interval, in seconds.
|
|
To set this value, cLSysMulticastMLDSnoopingEnabled must
|
|
be set to true."
|
|
DEFVAL { 20 }
|
|
::= { cLSysMulticastMLD 3 }
|
|
|
|
-- stats-timer config.
|
|
--
|
|
-- ********************************************************************
|
|
-- * System Realtime Stats Timer Interval
|
|
-- ********************************************************************
|
|
|
|
clsSysRealtimeStatsTimer OBJECT-TYPE
|
|
SYNTAX Unsigned32 (2..5)
|
|
UNITS "Seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the realtime stats interval of
|
|
the system. There are 2 stats modes: realtime and
|
|
normal. Realtime interval is much less than normal mode."
|
|
DEFVAL { 5 }
|
|
::= { clsConfigStats 1 }
|
|
|
|
-- ********************************************************************
|
|
-- * System Normal Stats Timer Interval
|
|
-- ********************************************************************
|
|
|
|
clsSysNormalStatsTimer OBJECT-TYPE
|
|
SYNTAX Unsigned32 (10..180)
|
|
UNITS "Seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the normal stats interval of the system.
|
|
There are 2 stats modes: realtime and normal. Realtime interval
|
|
is much less than normal mode."
|
|
DEFVAL { 180 }
|
|
::= { clsConfigStats 2 }
|
|
|
|
-- ********************************************************************
|
|
-- * System Sampling Statistics Interval
|
|
-- ********************************************************************
|
|
|
|
clsSysStatsSamplingInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "Seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the sampling interval of the system,
|
|
which is applied to WLC and APs connected to this WLC.
|
|
WLC and APs poll specific data every sampling interval."
|
|
::= { clsConfigStats 3 }
|
|
|
|
-- ********************************************************************
|
|
-- * System Average Statistics Interval
|
|
-- ********************************************************************
|
|
|
|
clsSysStatsAverageInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "Seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the average statistics interval of
|
|
the system, which is applied to WLC and APs connected to
|
|
this WLC. This interval works as a time window for
|
|
calculating the average value of the data polled by WLC/AP
|
|
every sampling interval."
|
|
::= { clsConfigStats 4 }
|
|
|
|
-- Alarm service config.
|
|
--
|
|
-- ********************************************************************
|
|
-- * Alarm Hold Time
|
|
-- ********************************************************************
|
|
|
|
clsAlarmHoldTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..3600)
|
|
UNITS "second"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the time in seconds for which
|
|
an alarm object should be soaked when its on/off
|
|
state is changed."
|
|
DEFVAL { 6 }
|
|
::= { clsAlarmObjects 1 }
|
|
|
|
-- ********************************************************************
|
|
-- * Alarm Retransmit Interval
|
|
-- ********************************************************************
|
|
|
|
clsAlarmTrapRetransmitInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
UNITS "second"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the trap retransmission
|
|
interval in seconds. Setting this value to 0 means
|
|
no retransmission."
|
|
DEFVAL { 0 }
|
|
::= { clsAlarmObjects 2 }
|
|
|
|
-- System-wide thresholds config.
|
|
--
|
|
-- ********************************************************************
|
|
-- * Controller CPU usage threshold
|
|
-- ********************************************************************
|
|
|
|
clsSysControllerCpuUsageThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
UNITS "Percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the CPU usage threshold on a
|
|
controller.
|
|
Setting this value to 0 means no threshold."
|
|
DEFVAL { 0 }
|
|
::= { clsSysThresholdConfig 1 }
|
|
|
|
-- ********************************************************************
|
|
-- * Controller memory usage threshold
|
|
-- ********************************************************************
|
|
|
|
clsSysControllerMemoryUsageThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
UNITS "Percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the memory usage threshold on a
|
|
controller.
|
|
Setting this value to 0 means no threshold."
|
|
DEFVAL { 0 }
|
|
::= { clsSysThresholdConfig 2 }
|
|
|
|
-- ********************************************************************
|
|
-- * AP CPU usage threshold
|
|
-- ********************************************************************
|
|
|
|
clsSysApCpuUsageThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
UNITS "Percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the CPU usage threshold on a
|
|
AP. Setting this value to 0 means no threshold."
|
|
DEFVAL { 0 }
|
|
::= { clsSysThresholdConfig 3 }
|
|
|
|
-- ********************************************************************
|
|
-- * AP memory usage threshold
|
|
-- ********************************************************************
|
|
|
|
clsSysApMemoryUsageThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
UNITS "Percent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the memory usage threshold on a
|
|
AP. Setting this value to 0 means no threshold."
|
|
DEFVAL { 0 }
|
|
::= { clsSysThresholdConfig 4 }
|
|
|
|
-- ********************************************************************
|
|
-- NMHeartBeat Configuration
|
|
-- ********************************************************************
|
|
|
|
clsNMHeartBeatEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether heart beat trap to network
|
|
manager is enabled or disabled.
|
|
A value of 'true' indicates that, network manager
|
|
heart beat feature is enabled.
|
|
A value of 'false' indicates that, network manager
|
|
heart beat feature is disabled."
|
|
DEFVAL { false }
|
|
::= { clsNMHeartBeat 1 }
|
|
|
|
clsNMHeartBeatInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
UNITS "Seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the heart beat trap interval in
|
|
seconds to network manager."
|
|
DEFVAL { 180 }
|
|
::= { clsNMHeartBeat 2 }
|
|
|
|
clsSysLogEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether debug log to syslog is
|
|
enabled or disabled.
|
|
A value of 'true' indicates that debug log to syslog is
|
|
enabled on the controller.
|
|
A value of 'false' indicates that debug log to syslog is
|
|
disabled on the controller."
|
|
DEFVAL { false }
|
|
::= { clsConfig 22 }
|
|
|
|
clsSysLogLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
emergencies(1),
|
|
alerts(2),
|
|
critical(3),
|
|
errors(4),
|
|
warnings(5),
|
|
notifications(6),
|
|
informational(7),
|
|
debugging(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the debug log level that
|
|
can be send to syslog on the controller.
|
|
The level for syslog are:
|
|
emergencies - system is unusable
|
|
alerts - action must be taken immediately
|
|
critical - critical conditions
|
|
errors - error conditions
|
|
warnings - warning conditions
|
|
notifications - normal but signification condition
|
|
informational - Informational
|
|
debugging - debug-level messages."
|
|
::= { clsConfig 23 }
|
|
|
|
clsConfigApMaxCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object represents the the max number of AP's
|
|
supported in WLC."
|
|
DEFVAL { 0 }
|
|
::= { clsConfig 24 }
|
|
|
|
clsUSBMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether USB is enabled or disabled.
|
|
A value of 'true' indicates that, USB is enabled.
|
|
A value of 'false' indicates that, USB is disabled."
|
|
DEFVAL { true }
|
|
::= { clsConfig 40 }
|
|
-- ********************************************************************
|
|
-- * Trap Black List Table
|
|
-- ********************************************************************
|
|
|
|
clsTrapBlacklistTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ClsTrapBlacklistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represents the trap blacklist.
|
|
Traps in black list will be blocked while
|
|
sending out."
|
|
::= { cLSTrapSwitchConfig 1 }
|
|
|
|
clsTrapBlacklistEntry OBJECT-TYPE
|
|
SYNTAX ClsTrapBlacklistEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry in this table provides the name of trap
|
|
in trap blacklist."
|
|
INDEX { clsBlacklistTrapIndex }
|
|
::= { clsTrapBlacklistTable 1 }
|
|
|
|
ClsTrapBlacklistEntry ::= SEQUENCE {
|
|
clsBlacklistTrapIndex Unsigned32,
|
|
clsTrapNameInBlacklist SnmpAdminString,
|
|
clsTrapBlacklistRowStatus RowStatus
|
|
}
|
|
|
|
clsBlacklistTrapIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents trap uniquely in blacklist."
|
|
::= { clsTrapBlacklistEntry 1 }
|
|
|
|
clsTrapNameInBlacklist OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies name of trap in trap blacklist."
|
|
::= { clsTrapBlacklistEntry 2 }
|
|
|
|
clsTrapBlacklistRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the status column for this row and used
|
|
to create and delete specific instances of rows
|
|
in this table."
|
|
::= { clsTrapBlacklistEntry 3 }
|
|
|
|
|
|
|
|
clsLinkLocalBridgingEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether link local bridging on
|
|
client packets is enabled or disabled.
|
|
A value of 'true' indicates that link local bridging on
|
|
client packets is enabled on the controller.
|
|
A value of 'false' indicates that link local bridging on
|
|
client packets is disabled on the controller."
|
|
::= { clsConfig 26 }
|
|
|
|
clsNetworkHttpProfCustomPort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the custom port
|
|
for http profiling."
|
|
DEFVAL { 80 }
|
|
::= { clsConfig 27 }
|
|
|
|
clsWGBForcedL2RoamEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether forced L2 Roaming
|
|
is enabled or disable for WGB clients.
|
|
A value of 'true' indicates that, forced L2 Roaming
|
|
is enabled for WGB clients.
|
|
A value of 'false' indicates that, forced L2 Roaming
|
|
is disabled for WGB clients."
|
|
DEFVAL { false }
|
|
::= { clsConfig 38 }
|
|
|
|
clsCrashSystem OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether to reset the switch
|
|
with a crash or not.
|
|
A value of 'true' indicates that, the switch
|
|
would crash.
|
|
A value of 'false'indicates that, not crashed."
|
|
DEFVAL { false }
|
|
::= { clsConfig 99 }
|
|
-- ********************************************************************
|
|
-- clsIconCfg
|
|
-- ********************************************************************
|
|
|
|
clsIconCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ClsIconCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represents the generic icon file configuration in
|
|
the controller. It has only one argument; the icon file name
|
|
which shall be used to index the rows in this table."
|
|
::= { clsConfig 28 }
|
|
|
|
clsIconCfgEntry OBJECT-TYPE
|
|
SYNTAX ClsIconCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry in this table represents the icon config entry"
|
|
INDEX { clsIconCfgFileName }
|
|
::= { clsIconCfgTable 1 }
|
|
|
|
ClsIconCfgEntry ::= SEQUENCE {
|
|
clsIconCfgFileName SnmpAdminString,
|
|
clsIconCfgFileType SnmpAdminString,
|
|
clsIconCfgLangCode SnmpAdminString,
|
|
clsIconCfgWidth Unsigned32,
|
|
clsIconCfgHeight Unsigned32,
|
|
clsIconCfgRowStatus RowStatus
|
|
}
|
|
|
|
clsIconCfgFileName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the icon filename"
|
|
::= { clsIconCfgEntry 1 }
|
|
|
|
clsIconCfgFileType OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the filetype of the icon file"
|
|
DEFVAL { "" }
|
|
::= { clsIconCfgEntry 2 }
|
|
|
|
clsIconCfgLangCode OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (2..3))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the language code associated
|
|
with the icon file"
|
|
DEFVAL { "" }
|
|
::= { clsIconCfgEntry 3 }
|
|
|
|
clsIconCfgWidth OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the width of the icon file"
|
|
DEFVAL { 0 }
|
|
::= { clsIconCfgEntry 4 }
|
|
|
|
clsIconCfgHeight OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the height of the icon file"
|
|
DEFVAL { 0 }
|
|
::= { clsIconCfgEntry 5 }
|
|
|
|
clsIconCfgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies status column for this row
|
|
and used to create and delete specific
|
|
instances of rows in this table."
|
|
::= { clsIconCfgEntry 6 }
|
|
|
|
|
|
|
|
-- ***************************************************************
|
|
-- ** Http Proxy and Dns Server Ip********************************
|
|
-- ***************************************************************
|
|
|
|
clsNetworkHttpProxyPort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the custom port
|
|
for http proxy"
|
|
::= { clsConfig 29 }
|
|
|
|
clsNetworkHttpProxyIpType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the http proxy IP address
|
|
type"
|
|
DEFVAL { 0 }
|
|
::= { clsConfig 30 }
|
|
|
|
clsNetworkHttpProxyIp OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Object specifies the IP address of the
|
|
http proxy"
|
|
::= { clsConfig 31 }
|
|
|
|
clsNetworkDnsServerIpType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the DNS server IP address
|
|
type"
|
|
DEFVAL { 0 }
|
|
::= { clsConfig 32 }
|
|
|
|
clsNetworkDnsServerIp OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Object specifies the IP address of the DNS server"
|
|
::= { clsConfig 33 }
|
|
|
|
-- ***************************************************************
|
|
-- ** Calea Configuration *******************************
|
|
-- ***************************************************************
|
|
|
|
clsConfigCaleaEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether CALEA lawful Intercept
|
|
feature enabled or disabled.
|
|
A value of 'true' indicates that, CALEA lawful Intercept
|
|
feature enabled.
|
|
A value of 'false'indicates that, CALEA lawful Intercept
|
|
feature disabled."
|
|
DEFVAL { false }
|
|
::= { clsConfigCalea 1 }
|
|
|
|
clsConfigCaleaServerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object specifies the address of the CALEA
|
|
lawful intercept server"
|
|
::= { clsConfigCalea 2 }
|
|
|
|
clsConfigCaleaPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies about port number of CALEA lawful
|
|
intercept server"
|
|
DEFVAL { 0 }
|
|
::= { clsConfigCalea 3 }
|
|
|
|
clsConfigCaleaAccountingInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..1440)
|
|
UNITS "Minutes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the accounting interval of CALEA
|
|
lawful intercept."
|
|
DEFVAL { 8 }
|
|
::= { clsConfigCalea 4 }
|
|
|
|
clsConfigCaleaVenue OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the CALEA Venue description"
|
|
::= { clsConfigCalea 5 }
|
|
|
|
clsConfigCaleaServerIpType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Object specifies the address type of the
|
|
CALEA lawful intercept server"
|
|
DEFVAL { ipv4 }
|
|
::= { clsConfigCalea 6 }
|
|
|
|
clsConfigCaleaServerIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This Object specifies the IPv4 address of the CALEA
|
|
lawful intercept server"
|
|
::= { clsConfigCalea 7 }
|
|
|
|
clSysLogIPSecStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies Syslog over IPSEC Status
|
|
A value of 'true' indicates that, syslog over
|
|
ipsec is enabled.
|
|
A value of 'false' indicates that syslog over
|
|
ipsec is disabled."
|
|
DEFVAL { false }
|
|
::= { clsConfig 35 }
|
|
|
|
clSysLogIPSecProfName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies IPsec profile to be used
|
|
for syslog over IPSec."
|
|
::= { clsConfig 36 }
|
|
|
|
-- ********************************************************************
|
|
-- * Status Objects
|
|
-- ********************************************************************
|
|
|
|
cLSysLagModeInTransition OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents whether the LAG mode is
|
|
in transition or not.
|
|
A value of 'true' indicates that, the LAG mode
|
|
is in transition and the controller has to be
|
|
rebooted to take effect.
|
|
A value of 'false' indicates that, the LAG mode
|
|
is not in transition."
|
|
DEFVAL { false }
|
|
::= { clsStatus 1 }
|
|
|
|
clsRAIDStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ClsRAIDStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represents the RAID and rebuild status."
|
|
::= { clsStatus 2 }
|
|
|
|
clsRAIDStatusEntry OBJECT-TYPE
|
|
SYNTAX ClsRAIDStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry in this table provides RAID drive status."
|
|
INDEX { clsRAIDDriveNumber }
|
|
::= { clsRAIDStatusTable 1 }
|
|
|
|
ClsRAIDStatusEntry ::= SEQUENCE {
|
|
clsRAIDDriveNumber Unsigned32,
|
|
clsRAIDStatus INTEGER,
|
|
clsRAIDRebuildPercentage Unsigned32
|
|
}
|
|
|
|
clsRAIDDriveNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates drive number in the system."
|
|
::= { clsRAIDStatusEntry 1 }
|
|
|
|
clsRAIDStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
good(1),
|
|
bad(2),
|
|
badstartrebuild(3),
|
|
rebuilding(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the status of the drive.
|
|
A value of good indicates that, hard disk in RAID
|
|
volume is good.
|
|
A value of bad indicates that, hard disk in RAID
|
|
volume is bad.
|
|
A value of badstartrebuild indicates that, hard disk
|
|
in RAID volume is bad and rebuild is triggered.
|
|
A value of rebuilding indicates that, hard disk in
|
|
RAID volume is rebuilding."
|
|
DEFVAL { good }
|
|
::= { clsRAIDStatusEntry 2 }
|
|
|
|
clsRAIDRebuildPercentage OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "Percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the rebuild percentage of drive.
|
|
This object is applicable only when RAID status is
|
|
rebuilding."
|
|
::= { clsRAIDStatusEntry 3 }
|
|
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Emergency Image Version
|
|
-- ********************************************************************
|
|
|
|
clsEmergencyImageVersion OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents Cisco recommends installing Cisco
|
|
Unified Wireless Network Controller Boot Software ,
|
|
(*_ER.aes , where star denotes the version of the controller
|
|
image ) on all controller platforms. If this ER.aes is not
|
|
installed, the controller would not be able to show the
|
|
Emergency Image Version correctly(or Field Recovery Image
|
|
Version), and would be shown as 'N/A'. The ER.aes files are
|
|
independent from the controller software files. Any controller
|
|
software file can be run with any ER.aes file. However,
|
|
installing the latest boot software file (*_ER.aes , where
|
|
star denotes the controller version) ensures that the boot
|
|
software modifications in all of the previous and current
|
|
boot software ER.aes files are installed."
|
|
::= { clsImageInfo 1 }
|
|
|
|
-- Security oids
|
|
|
|
clsSecStrongPwdCaseCheck OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the whether password case check
|
|
is enabled or disabled.
|
|
A value of 'true' indicates that, the new password must
|
|
contain characters from at least three of the following
|
|
classes : lowercase letters, uppercase letters, digits
|
|
and special characters.
|
|
A value of 'false' indicates that, no checks for
|
|
password."
|
|
DEFVAL { false }
|
|
::= { clsSecurityGroup 1 }
|
|
|
|
clsSecStrongPwdConsecutiveCheck OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the password consecutive
|
|
check is enabled or disabled.
|
|
A value of 'true' indicates that, the password provided
|
|
should not have a character repeated more than thrice
|
|
consecutively.
|
|
A value of 'false' indicates that, character repeatation
|
|
check disabled"
|
|
DEFVAL { false }
|
|
::= { clsSecurityGroup 2 }
|
|
|
|
clsSecStrongPwdDefaultCheck OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether default check for the
|
|
passwords is enabled or disabled.
|
|
A value of 'true' indicates that, the new password must
|
|
not be 'cisco', 'ocsic', 'admin', 'nimda' or any variant
|
|
obtained by changing the capitalization of letters therein,
|
|
or by substituting '1' '|' or '!' for i, and/or substituting
|
|
'0' for 'o', and/or substituting '$' for 's'.
|
|
A value of 'false' indicates that, default check disabled for
|
|
the password."
|
|
DEFVAL { false }
|
|
::= { clsSecurityGroup 3 }
|
|
|
|
clsSecStrongPwdAsUserNameCheck OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether username check for the
|
|
password is enabled or disabled.
|
|
A value of 'true' indicates that, the new password must
|
|
not be same as the associated username or the reversed
|
|
username.
|
|
A value of 'false' indicates that, check for user name in
|
|
the password is disabled"
|
|
DEFVAL { false }
|
|
::= { clsSecurityGroup 4 }
|
|
|
|
clsSecStrongPwdPositionCheck OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether position check for the
|
|
passwords is enabled or disabled.
|
|
A value of 'true' indicates that, position check for
|
|
the password is enabled.
|
|
A value of 'false' indicates that, position check for
|
|
the password is disabled."
|
|
DEFVAL { false }
|
|
::= { clsSecurityGroup 5 }
|
|
|
|
clsSecStrongPwdDigitCheck OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether digit check for the
|
|
passwords is enabled or disabled.
|
|
A value of 'true' indicates that, digit check for the
|
|
passwords is enabled.
|
|
A value of 'false' indicates that, digit check for the
|
|
passwords is disabled."
|
|
DEFVAL { false }
|
|
::= { clsSecurityGroup 6 }
|
|
|
|
clsSecStrongPwdMinLength OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the minimum password length for the
|
|
passwords configured in controller."
|
|
::= { clsSecurityGroup 7 }
|
|
|
|
clsSecStrongPwdMinUpperCase OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the minimum number of upper case
|
|
characters for the passwords configured in controller."
|
|
::= { clsSecurityGroup 8 }
|
|
|
|
clsSecStrongPwdMinLowerCase OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the minimum number of upper case
|
|
characters for the passwords configured in controller."
|
|
::= { clsSecurityGroup 9 }
|
|
|
|
clsSecStrongPwdMinDigits OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the minimum number of digits for the
|
|
passwords configured in controller."
|
|
::= { clsSecurityGroup 10 }
|
|
|
|
clsSecStrongPwdMinSpecialChar OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the minimum special characters for the
|
|
passwords configured in controller."
|
|
::= { clsSecurityGroup 11 }
|
|
|
|
clsSecWlanCCEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents whether WLAN common criteria
|
|
is enabled or disabled.
|
|
A value of 'true' indicates that, WLAN common criteria
|
|
is enabled.
|
|
A value of 'false' indicates that, WLAN common criteria
|
|
is disabled."
|
|
DEFVAL { false }
|
|
::= { clsSecurityGroup 12 }
|
|
|
|
clsSecUcaplEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents whether UCAPL is enabled or
|
|
disabled.
|
|
A value of 'true' indicates that, UCAPL is enabled.
|
|
A value of 'false' indicates that, UCAPL is disabled."
|
|
DEFVAL { false }
|
|
::= { clsSecurityGroup 13 }
|
|
|
|
clsSecMgmtUsrLockoutEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether lockout for the
|
|
management user is enabled or disabled.
|
|
A value of 'true'indicates that, lockout for the
|
|
management user is enabled.
|
|
A value of 'false' indicates that, lockout for the
|
|
management user is disabled."
|
|
DEFVAL { false }
|
|
::= { clsSecurityGroup 14 }
|
|
|
|
clsSecMgmtUsrLockoutTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the lockout time for the
|
|
management user configured in controller."
|
|
::= { clsSecurityGroup 15 }
|
|
|
|
clsSecMgmtUsrLockoutAttempts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the lockout attempts for the
|
|
management user configured in controller."
|
|
::= { clsSecurityGroup 16 }
|
|
|
|
clsSecSnmpv3UsrLockoutEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the lockout for the
|
|
SNMP version3 user is enabled or disabled.
|
|
A value of 'true' indicates that, lockout for the
|
|
SNMPV3 user is enabled.
|
|
A value of 'false' indicates that, lockout for the
|
|
SNMPV3 user is disabled."
|
|
DEFVAL { false }
|
|
::= { clsSecurityGroup 17 }
|
|
|
|
clsSecSnmpv3UsrLockoutTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the lockout time for the
|
|
SNMP v3 user configured in controller."
|
|
::= { clsSecurityGroup 18 }
|
|
|
|
clsSecSnmpv3UsrLockoutAttempts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the lockout attempts for the
|
|
SNMP v3 user configured in controller."
|
|
::= { clsSecurityGroup 19 }
|
|
|
|
clsSecMgmtUsrLockoutLifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..180)
|
|
UNITS "days"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the lockout life time
|
|
for the management user configured in controller."
|
|
::= { clsSecurityGroup 20 }
|
|
|
|
clsSecSnmpv3UsrLockoutLifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..180)
|
|
UNITS "days"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the lockout life time for the
|
|
SNMPV3 user configured in controller."
|
|
::= { clsSecurityGroup 21 }
|
|
|
|
-- ********************************************************************
|
|
-- * System Flash Size
|
|
-- ********************************************************************
|
|
|
|
clsSysFlashSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "KBytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the total flash memory
|
|
size in Kbytes."
|
|
::= { clsSysInfo 1 }
|
|
|
|
-- ********************************************************************
|
|
-- * System Memory Type
|
|
-- ********************************************************************
|
|
|
|
clsSysMemoryType OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the system memory type."
|
|
::= { clsSysInfo 2 }
|
|
|
|
-- ********************************************************************
|
|
-- * System Supported MAX Clients
|
|
-- ********************************************************************
|
|
|
|
clsSysMaxClients OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents max associated clients
|
|
supported per WLC"
|
|
::= { clsSysInfo 3 }
|
|
|
|
-- ********************************************************************
|
|
-- * Number of connected AP's
|
|
-- ********************************************************************
|
|
|
|
clsSysApConnectCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the count of AP's that are
|
|
connected with WLC"
|
|
::= { clsSysInfo 4 }
|
|
|
|
clsSysNetId OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the SysNetId which is the numeric string
|
|
to identify the system information like SysName"
|
|
::= { clsSysInfo 5 }
|
|
|
|
-- ********************************************************************
|
|
-- * WLC System Current Memory Usage
|
|
-- ********************************************************************
|
|
|
|
clsSysCurrentMemoryUsage OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the current percent usage
|
|
of system memory. This MIB object should be updated
|
|
every clsSysStatsSamplingInterval."
|
|
::= { clsSysInfo 6 }
|
|
|
|
-- ********************************************************************
|
|
-- * WLC System Average Memory Usage
|
|
-- ********************************************************************
|
|
|
|
clsSysAverageMemoryUsage OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the average percent usage
|
|
of system memory. The memory average usage should be
|
|
the average of memory-Usage during the time window
|
|
specified by clsSysStatsAverageInterval."
|
|
::= { clsSysInfo 7 }
|
|
|
|
-- ********************************************************************
|
|
-- * WLC System Current CPU Usage
|
|
-- ********************************************************************
|
|
|
|
clsSysCurrentCpuUsage OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the current percent usage of all CPUs.
|
|
This MIB should be updated every clsSysStatsSamplingInterval."
|
|
::= { clsSysInfo 8 }
|
|
|
|
-- ********************************************************************
|
|
-- * WLC System Average CPU Usage
|
|
-- ********************************************************************
|
|
|
|
clsSysAverageCpuUsage OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the average percent CPU usage.
|
|
The average CPU usage should be the average of CPU-Usage
|
|
during the time window specified by
|
|
clsSysStatsAverageInterval."
|
|
::= { clsSysInfo 9 }
|
|
|
|
-- ********************************************************************
|
|
-- * System Cpu Type
|
|
-- ********************************************************************
|
|
|
|
clsSysCpuType OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the cpu type."
|
|
::= { clsSysInfo 10 }
|
|
|
|
clsMaxRFIDTagsCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the maximum RFID tags present
|
|
on the controller."
|
|
::= { clsSysInfo 11 }
|
|
|
|
clsMaxClientsCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the maximum clients present
|
|
on the controller."
|
|
::= { clsSysInfo 12 }
|
|
|
|
clsApAssocFailedCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the count when Access Point
|
|
failed to associate with the controller."
|
|
::= { clsSysInfo 13 }
|
|
|
|
clsCurrentPortalClientCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the current portal clients present
|
|
on the controller."
|
|
::= { clsSysInfo 14 }
|
|
|
|
clsCurrentOnlineUsersCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the current all online clients present
|
|
on the controller."
|
|
::= { clsSysInfo 15 }
|
|
|
|
clsSysAbnormalOfflineCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the abnormal offline count for the wlc."
|
|
::= { clsSysInfo 16 }
|
|
|
|
clsSysFlashType OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the system Flash type."
|
|
::= { clsSysInfo 17 }
|
|
|
|
clsSysOpenUsersCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the current all online open
|
|
authentication clients present on the controller."
|
|
::= { clsSysInfo 18 }
|
|
|
|
clsSysWepPskUsersCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the current all online wep/psk
|
|
authentication clients present on the controller."
|
|
::= { clsSysInfo 19 }
|
|
|
|
clsSysPeapSimUsersCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the current all online
|
|
peap/sim authentication clients present on the
|
|
controller."
|
|
::= { clsSysInfo 20 }
|
|
|
|
clsSysPeapSimReqCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the PEAP/SIM request
|
|
on the controller."
|
|
::= { clsSysInfo 21 }
|
|
|
|
clsSysPeapSimReqSuccessCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the successful PEAP/SIM request
|
|
on the controller."
|
|
::= { clsSysInfo 22 }
|
|
|
|
clsSysPeapSimReqFailureCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the failed PEAP/SIM request
|
|
on the controller."
|
|
::= { clsSysInfo 23 }
|
|
|
|
clsSysNasId OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the SysNasId. NasId is used to
|
|
support Roaming, location-based service."
|
|
::= { clsSysInfo 24 }
|
|
|
|
clsSysCoChannelTrapRssiThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the minimum value of RSSI
|
|
considered for the trap of Co-Channel AP."
|
|
::= { clsSysInfo 25 }
|
|
|
|
clsSysAdjChannelTrapRssiThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the minimum value of RSSI
|
|
considered for the trap of Adj channel AP"
|
|
::= { clsSysInfo 26 }
|
|
|
|
clsSysClientTrapRssiThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the minimum value of RSSI
|
|
considered for the trap of client."
|
|
::= { clsSysInfo 27 }
|
|
|
|
clsSysCmxActiveConnections OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the count of active connections
|
|
present on the controller."
|
|
::= { clsSysInfo 28 }
|
|
|
|
-- ********************************************************************
|
|
-- * Individual CPU Usage
|
|
-- ********************************************************************
|
|
|
|
clsAllCpuUsage OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the CPU usage string."
|
|
::= { clsCpuInfo 1 }
|
|
|
|
-- ********************************************************************
|
|
-- * Lync Control Object
|
|
-- ********************************************************************
|
|
|
|
clsLyncState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether Lync is enabled on system.
|
|
A value of 'true' indicates that, Lync state is enabled.
|
|
A value of 'false' indicates that, Lync state is disabled."
|
|
DEFVAL { false }
|
|
::= { clsLyncInfo 1 }
|
|
|
|
clsLyncPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies about port number of Lync Service."
|
|
::= { clsLyncInfo 2 }
|
|
|
|
clsLyncProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
http(1),
|
|
securehttp(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies about protocol of Lync Service.
|
|
A value of http indicates that, lync protocol is http.
|
|
A value of secure http indicates that, lync protocol is
|
|
secure http."
|
|
DEFVAL { http }
|
|
::= { clsLyncInfo 3 }
|
|
-- stats-timer config.
|
|
--
|
|
|
|
-- ********************************************************************
|
|
-- clsSysPing
|
|
-- ********************************************************************
|
|
|
|
clsSysPingTestTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ClsSysPingTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table represents the test ping entries"
|
|
::= { clsStatus 3 }
|
|
|
|
clsSysPingTestEntry OBJECT-TYPE
|
|
SYNTAX ClsSysPingTestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each Entry (conceptual row) in the clsSysPingTest Table
|
|
represents a ping test id."
|
|
INDEX { clsSysPingTestId }
|
|
::= { clsSysPingTestTable 1 }
|
|
|
|
ClsSysPingTestEntry ::= SEQUENCE {
|
|
clsSysPingTestId Integer32,
|
|
clsSysPingTestIPAddressType InetAddressType,
|
|
clsSysPingTestIPAddress InetAddress,
|
|
clsSysPingTestSendCount Integer32,
|
|
clsSysPingTestReceivedCount Integer32,
|
|
clsSysPingTestStatus INTEGER,
|
|
clsSysPingTestMaxTimeInterval Unsigned32,
|
|
clsSysPingTestMinTimeInterval Unsigned32,
|
|
clsSysPingTestAvgTimeInterval Unsigned32,
|
|
clsSysPingTestRowStatus RowStatus
|
|
}
|
|
|
|
clsSysPingTestId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the index of pingtest ID"
|
|
::= { clsSysPingTestEntry 1 }
|
|
|
|
clsSysPingTestIPAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IP address type"
|
|
::= { clsSysPingTestEntry 2 }
|
|
|
|
clsSysPingTestIPAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the IP address of the
|
|
device to which ping test to perform"
|
|
::= { clsSysPingTestEntry 3 }
|
|
|
|
clsSysPingTestSendCount OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
UNITS "Bytes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the number of bytes sent"
|
|
::= { clsSysPingTestEntry 4 }
|
|
|
|
clsSysPingTestReceivedCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the number of bytes received."
|
|
::= { clsSysPingTestEntry 5 }
|
|
|
|
clsSysPingTestStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inprogress(1),
|
|
complete(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents status of the ping test.
|
|
A value of inprogress indicates that, ping test
|
|
in progress.
|
|
A value of complete indicates that, ping test
|
|
is complete."
|
|
::= { clsSysPingTestEntry 6 }
|
|
|
|
clsSysPingTestMaxTimeInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "mSec"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents maximum time interval in msec."
|
|
::= { clsSysPingTestEntry 7 }
|
|
|
|
clsSysPingTestMinTimeInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "mSec"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents minimum time interval in msec."
|
|
::= { clsSysPingTestEntry 8 }
|
|
|
|
clsSysPingTestAvgTimeInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "mSec"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents average time interval in msec."
|
|
::= { clsSysPingTestEntry 9 }
|
|
|
|
clsSysPingTestRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the status column for this row and used
|
|
to create and delete specific instances of rows
|
|
in this table."
|
|
::= { clsSysPingTestEntry 10 }
|
|
|
|
|
|
|
|
-- ********************************************************************
|
|
-- * Notification Control Object
|
|
-- ********************************************************************
|
|
|
|
clsSecStrongPwdCheckTrapEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the ciscoLwappStrongPwdCheck
|
|
notification would be generated.
|
|
A value of 'true' indicates that, the agent generates
|
|
ciscoLwappStrongPwdCheck notification.
|
|
A value of 'false' indicates that, the agent doesn't
|
|
generates ciscoLwappStrongPwdCheck notification."
|
|
DEFVAL { true }
|
|
::= { ciscoLwappSysMIBNotifControlObjects 1 }
|
|
|
|
clsMaxClientsTrapEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the
|
|
ciscoLwappMaxClientsReached notification would be
|
|
generated.
|
|
A value of 'true' indicates that, the agent generates
|
|
ciscoLwappMaxClientsReached notification.
|
|
A value of 'false' indicates that, the agent doesn't
|
|
generates ciscoLwappMaxClientsReached notification."
|
|
DEFVAL { true }
|
|
::= { ciscoLwappSysMIBNotifControlObjects 2 }
|
|
|
|
clsMaxRFIDTagsTrapEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the
|
|
ciscoLwappMaxRFIDTagsReached notification would be
|
|
generated.
|
|
A value of 'true' indicates that, the agent generates
|
|
ciscoLwappMaxRFIDTagsReached notification.
|
|
A value of 'false' indicates that, the agent doesn't
|
|
generates ciscoLwappMaxRFIDTagsReached notification."
|
|
DEFVAL { true }
|
|
::= { ciscoLwappSysMIBNotifControlObjects 3 }
|
|
|
|
clsNacAlertTrapEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the
|
|
Nac alert association/disassociation notification
|
|
would be generated.
|
|
A value of 'true' indicates that, the agent generates
|
|
nac alert notification.
|
|
A value of 'false' indicates that, the agent doesn't
|
|
generates nac alert notification."
|
|
DEFVAL { true }
|
|
::= { ciscoLwappSysMIBNotifControlObjects 4 }
|
|
|
|
clsMfpTrapEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether the
|
|
mfp trap notification would be generated.
|
|
A value of 'true' indicates that, the agent generates
|
|
mfp notification.
|
|
A value of 'false' indicates that, the agent doesn't
|
|
generates mfp notification."
|
|
DEFVAL { true }
|
|
::= { ciscoLwappSysMIBNotifControlObjects 5 }
|
|
|
|
-- ********************************************************************
|
|
-- * Notification Objects
|
|
-- ********************************************************************
|
|
|
|
clsSecStrongPwdManagementUser OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..24))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the management user who
|
|
enabled or disabled the strong password checks."
|
|
::= { ciscoLwappSysMIBNotifObjects 1 }
|
|
|
|
clsSecStrongPwdCheckType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
caseCheck(1),
|
|
consecutiveCheck(2),
|
|
defaultCheck(3),
|
|
usernameCheck(4),
|
|
allChecks(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the type of the check that was
|
|
enabled or disabled by the management user.
|
|
A value of 'caseCheck' indicates that, the caseCheck
|
|
was enabled or disabled by the management user.
|
|
A value of 'consecutiveCheck' indicates that, the
|
|
consecutiveCheck was enabled or disabled by the
|
|
management user.
|
|
A value of 'defaultCheck' indicates that, the
|
|
defaultCheck was enabled or disabled by the
|
|
management user.
|
|
A value of 'usernameCheck' indicates that, the
|
|
usernameCheck was enabled or disabled by the
|
|
management user.
|
|
A value of 'allChecks' indicates that, all checks
|
|
were enabled by the management user."
|
|
::= { ciscoLwappSysMIBNotifObjects 2 }
|
|
|
|
clsSecStrongPwdCheckOption OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents whether the strong password check
|
|
was enabled/disabled."
|
|
::= { ciscoLwappSysMIBNotifObjects 3 }
|
|
|
|
clsSysAlarmSet OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents whether this system alarm is
|
|
raise or clear.
|
|
A value of 'true' indicates that, this event is
|
|
enabled.
|
|
A value of 'false' indicates that, this even is
|
|
disabled."
|
|
::= { ciscoLwappSysMIBNotifObjects 4 }
|
|
|
|
clsSysMaxThresholdReachedClear OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents whether this event is
|
|
raise or clear.
|
|
A value of 'true' indicates that, this event is
|
|
cleared
|
|
A value of 'false' indicates that, this event is
|
|
raised."
|
|
::= { ciscoLwappSysMIBNotifObjects 5 }
|
|
|
|
clsTransferCfgAnalyzeResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
keyMismatch(2),
|
|
fileMissing(3),
|
|
contentMismatch(4)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the config file analyze result.
|
|
A value of unknown indicates that, unknown error.
|
|
A value of keyMismatch indicates that, the encrypt
|
|
key mismatch.
|
|
A value of fileMissing indicates that, the config
|
|
file missing.
|
|
A value of contentMismatch indicates that, the file is
|
|
not intended for this product."
|
|
::= { ciscoLwappSysMIBNotifObjects 6 }
|
|
|
|
clsWlcSwVersionBeforeUpgrade OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the wlc software version
|
|
info before upgrading fail."
|
|
::= { ciscoLwappSysMIBNotifObjects 7 }
|
|
|
|
clsWlcSwVersionAfterUpgrade OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the wlc software version
|
|
info after upgrading fail."
|
|
::= { ciscoLwappSysMIBNotifObjects 8 }
|
|
|
|
clsWlcUpgradeFailReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknownReason(1),
|
|
fileTypeMismatch(2),
|
|
fileCheckFail(3),
|
|
fileBackupToFlashFail(4)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the wlc upgrade fail reason.
|
|
A value of unknownReason indicates that, reason is unknown.
|
|
A value of fileTypeMismatch indicates that, mismatch in
|
|
the file extension. please check whether the extension is
|
|
.aes.
|
|
A value of fileCheckFail indicates that, file check fail,
|
|
please check whether the image is correct.
|
|
A value of fileBackupToFlashFail indicates that, flash
|
|
backup fail, please check whether the flash space is
|
|
enough."
|
|
::= { ciscoLwappSysMIBNotifObjects 9 }
|
|
|
|
clsPortNumber OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents port number of MGIG port."
|
|
::= { ciscoLwappSysMIBNotifObjects 10 }
|
|
|
|
clsPortSpeed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents port speed (Mbps) of MGIG Port."
|
|
::= { ciscoLwappSysMIBNotifObjects 11 }
|
|
|
|
clsPortSlot OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents slot number where MGIG port is present."
|
|
::= { ciscoLwappSysMIBNotifObjects 12 }
|
|
|
|
-- ********************************************************************
|
|
-- * Notifications
|
|
-- ********************************************************************
|
|
|
|
ciscoLwappSysInvalidXmlConfig NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification will be sent whenever invalid configuration
|
|
is detected by XML."
|
|
::= { ciscoLwappSysMIBNotifs 1 }
|
|
|
|
ciscoLwappNoVlanConfigured NOTIFICATION-TYPE
|
|
OBJECTS { cldcClientAccessVLAN }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification will be sent whenever wired client tries to
|
|
associate without interface for specified VLAN.
|
|
cldcClientAccessVLAN represents the access VLAN of the client.
|
|
cldcClientMacAddress represents the MAC address of the client."
|
|
::= { ciscoLwappSysMIBNotifs 2 }
|
|
|
|
ciscoLwappStrongPwdCheckNotif NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
clsSecStrongPwdManagementUser,
|
|
clsSecStrongPwdCheckType,
|
|
clsSecStrongPwdCheckOption
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification will be sent whenever the management user
|
|
enables/disables the strong password rules.
|
|
clsSecStrongPwdManagementUser represents the management user
|
|
configuring the strong password security checks.
|
|
clsSecStrongPwdCheckType represents the type of check that has
|
|
been enabled or disabled.
|
|
clsSecStrongPwdCheckOption represents the option chosen by the
|
|
user."
|
|
::= { ciscoLwappSysMIBNotifs 3 }
|
|
|
|
ciscoLwappSysCpuUsageHigh NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
clsSysCurrentCpuUsage,
|
|
clsSysAlarmSet
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification will be sent whenever WLC detects
|
|
its CPU usage is higher than the threshold
|
|
configured in clsSysControllerCpuUsageThreshold, this
|
|
notification is generated with clsSysAlarmSet set to
|
|
true. When its CPU usage falls below the threshold
|
|
lately, this notification is generated with
|
|
clsSysAlarmSet set to false."
|
|
::= { ciscoLwappSysMIBNotifs 4 }
|
|
|
|
ciscoLwappSysMemoryUsageHigh NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
clsSysCurrentMemoryUsage,
|
|
clsSysAlarmSet
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification will be sent whenever WLC detects
|
|
its memory usage is higher than the threshold
|
|
configured in clsSysControllerMemoryUsageThreshold,
|
|
this notification is generated with clsSysAlarmSet set
|
|
to true. When its memory usage falls below the threshold
|
|
lately, this notification is generated with
|
|
clsSysAlarmSet set to false."
|
|
::= { ciscoLwappSysMIBNotifs 5 }
|
|
|
|
ciscoLwappMaxRFIDTagsReached NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
clsMaxRFIDTagsTrapThreshold,
|
|
clsMaxRFIDTagsCount,
|
|
clsSysMaxThresholdReachedClear
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the number of
|
|
RFID tags on the controller exceeds the limit defined by
|
|
clsMaxRFIDTagsTrapThreshold."
|
|
::= { ciscoLwappSysMIBNotifs 6 }
|
|
|
|
ciscoLwappMaxClientsReached NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
clsMaxClientsTrapThreshold,
|
|
clsMaxClientsCount,
|
|
clsSysMaxThresholdReachedClear
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the number of
|
|
clients on the controller exceeds the limit defined by
|
|
clsMaxClientsTrapThreshold."
|
|
::= { ciscoLwappSysMIBNotifs 7 }
|
|
|
|
ciscoLwappNMHeartBeat NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification will be sent when Network Manager
|
|
Heart Beat Enable."
|
|
::= { ciscoLwappSysMIBNotifs 8 }
|
|
|
|
ciscoLwappCfgFileAnalyzeFail NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
clsTransferFilename,
|
|
clsTransferCfgAnalyzeResult
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification will be sent when config file
|
|
analyze fails."
|
|
::= { ciscoLwappSysMIBNotifs 9 }
|
|
|
|
ciscoLwappWlcUpgradeFail NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
clsWlcSwVersionBeforeUpgrade,
|
|
clsWlcSwVersionAfterUpgrade,
|
|
clsWlcUpgradeFailReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the wlc
|
|
upgrade fails."
|
|
::= { ciscoLwappSysMIBNotifs 10 }
|
|
|
|
ciscoLwappRAIDStatus NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
clsRAIDStatus,
|
|
clsRAIDDriveNumber,
|
|
clsRAIDRebuildPercentage
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the wlc
|
|
hard disc status changes."
|
|
::= { ciscoLwappSysMIBNotifs 11 }
|
|
|
|
ciscoLwappPortLinkSpeedTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
clsPortNumber,
|
|
clsPortSpeed,
|
|
clsPortSlot
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when link speed changes
|
|
in MGIG port."
|
|
::= { ciscoLwappSysMIBNotifs 12 }
|
|
-- *******************************************************************
|
|
-- * Compliance statements
|
|
-- *******************************************************************
|
|
|
|
ciscoLwappSysMIBCompliances OBJECT IDENTIFIER
|
|
::= { ciscoLwappSysMIBConform 1 }
|
|
|
|
ciscoLwappSysMIBGroups OBJECT IDENTIFIER
|
|
::= { ciscoLwappSysMIBConform 2 }
|
|
|
|
|
|
ciscoLwappSysMIBCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for the SNMP entities that
|
|
implement the ciscoLwappSysMIB module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { ciscoLwappSysConfigGroup }
|
|
::= { ciscoLwappSysMIBCompliances 1 }
|
|
|
|
ciscoLwappSysMIBComplianceRev1 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for the SNMP entities that
|
|
implement the ciscoLwappSysMIB module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { ciscoLwappSysConfigGroup }
|
|
|
|
GROUP ciscoLwappSysConfigFileEncryptionGroup
|
|
DESCRIPTION
|
|
"This group is mandatory only for platforms which support Config
|
|
Encryption."
|
|
|
|
GROUP ciscoLwappSysTransferOperationConfigGroup
|
|
DESCRIPTION
|
|
"This group is mandatory only for platforms which support
|
|
configuration of Transfer operation."
|
|
::= { ciscoLwappSysMIBCompliances 2 }
|
|
|
|
ciscoLwappSysMIBComplianceRev2 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for the SNMP entities that
|
|
implement the ciscoLwappSysMIB module. This deprecates
|
|
ciscoLwappSysMIBComplianceRev1."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoLwappSysConfigGroup,
|
|
ciscoLwappSysPortConfigGroup,
|
|
ciscoLwappSysSecurityConfigGroup,
|
|
ciscoLwappSysIgmpConfigGroup,
|
|
ciscoLwappSysSecNotifObjsGroup,
|
|
ciscoLwappSysNotifsGroup,
|
|
ciscoLwappSysNotifControlGroup,
|
|
ciscoLwappSysConfigGroupVer1
|
|
}
|
|
|
|
GROUP ciscoLwappSysConfigFileEncryptionGroup
|
|
DESCRIPTION
|
|
"This group is mandatory only for platforms which support Config
|
|
Encryption."
|
|
|
|
GROUP ciscoLwappSysTransferOperationConfigGroup
|
|
DESCRIPTION
|
|
"This group is mandatory only for platforms which support
|
|
configuration of Transfer operation."
|
|
::= { ciscoLwappSysMIBCompliances 3 }
|
|
|
|
ciscoLwappSysMIBComplianceRev3 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for the SNMP entities that
|
|
implement the ciscoLwappSysMIB module. This deprecates
|
|
ciscoLwappSysMIBComplianceRev1."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoLwappSysConfigGroup,
|
|
ciscoLwappSysPortConfigGroup,
|
|
ciscoLwappSysSecurityConfigGroup,
|
|
ciscoLwappSysIgmpConfigGroup,
|
|
ciscoLwappSysSecNotifObjsGroup,
|
|
ciscoLwappSysNotifsGroup,
|
|
ciscoLwappSysNotifControlGroup,
|
|
ciscoLwappLyncInfoGroup,
|
|
ciscoLwappSysConfigGroupSup1,
|
|
ciscoLwappSysInfoGroup,
|
|
ciscoLwappSysStatsConfigGroup,
|
|
ciscoLwappSysMulticastMLDGroup,
|
|
ciscoLwappSysConfigGroupVer1
|
|
}
|
|
|
|
GROUP ciscoLwappSysConfigFileEncryptionGroup
|
|
DESCRIPTION
|
|
"This group is mandatory only for platforms which support Config
|
|
Encryption."
|
|
|
|
GROUP ciscoLwappSysTransferOperationConfigGroup
|
|
DESCRIPTION
|
|
"This group is mandatory only for platforms which support
|
|
configuration of Transfer operation."
|
|
::= { ciscoLwappSysMIBCompliances 4 }
|
|
|
|
ciscoLwappSysMIBComplianceRev4 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the SNMP entities that
|
|
implement the ciscoLwappSysMIB module. This deprecates
|
|
ciscoLwappSysMIBComplianceRev1."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoLwappSysConfigGroup,
|
|
ciscoLwappSysPortConfigGroup,
|
|
ciscoLwappSysSecurityConfigGroup,
|
|
ciscoLwappSysIgmpConfigGroup,
|
|
ciscoLwappSysSecNotifObjsGroup,
|
|
ciscoLwappSysNotifsGroup,
|
|
ciscoLwappSysNotifControlGroup,
|
|
ciscoLwappLyncInfoGroup,
|
|
ciscoLwappSysConfigGroupSup1,
|
|
ciscoLwappSysInfoGroup,
|
|
ciscoLwappSysStatsConfigGroup,
|
|
ciscoLwappSysMulticastMLDGroup,
|
|
ciscoLwappSysConfigGroupVer2
|
|
}
|
|
|
|
GROUP ciscoLwappSysConfigFileEncryptionGroup
|
|
DESCRIPTION
|
|
"This group is mandatory only for platforms which support Config
|
|
Encryption."
|
|
|
|
GROUP ciscoLwappSysTransferOperationConfigGroup
|
|
DESCRIPTION
|
|
"This group is mandatory only for platforms which support
|
|
configuration of Transfer operation."
|
|
::= { ciscoLwappSysMIBCompliances 5 }
|
|
|
|
-- ********************************************************************
|
|
-- * Units of conformance
|
|
-- ********************************************************************
|
|
|
|
ciscoLwappSysConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clsDot3BridgeEnabled,
|
|
clsDownloadFileType,
|
|
clsDownloadCertificateKey,
|
|
clsUploadFileType,
|
|
clsUploadPacUsername,
|
|
clsUploadPacPassword,
|
|
clsUploadPacValidity
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represent the system wide
|
|
configuration on the controller."
|
|
::= { ciscoLwappSysMIBGroups 1 }
|
|
|
|
ciscoLwappSysConfigFileEncryptionGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clsTransferConfigFileEncryption,
|
|
clsTransferConfigFileEncryptionKey
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the System encryption configuration on
|
|
the controller."
|
|
::= { ciscoLwappSysMIBGroups 2 }
|
|
|
|
ciscoLwappSysConfigGroupSup1 OBJECT-GROUP
|
|
OBJECTS {
|
|
clsTimeZone,
|
|
clsTimeZoneDescription,
|
|
clsMaxClientsTrapThreshold,
|
|
clsMaxRFIDTagsTrapThreshold,
|
|
cLSysLogAddressType,
|
|
cLSysLogAddress,
|
|
cLSysLogHostRowStatus,
|
|
cLSysArpUnicastEnabled,
|
|
clsConfigArpUnicastEnabled,
|
|
clsNetworkRoutePrefixLength,
|
|
clsNetworkRouteGatewayType,
|
|
clsNetworkRouteGateway,
|
|
clsNetworkRouteStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represents the
|
|
timzone and syslog configuration on the
|
|
controller."
|
|
::= { ciscoLwappSysMIBGroups 3 }
|
|
|
|
ciscoLwappSysTransferOperationConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clsTransferServerAddressType,
|
|
clsTransferServerAddress,
|
|
clsTransferPath,
|
|
clsTransferFilename,
|
|
clsTransferFtpUsername,
|
|
clsTransferFtpPassword,
|
|
clsTransferFtpPortNum,
|
|
clsTransferTftpMaxRetries,
|
|
clsTransferTftpTimeout,
|
|
clsTransferStart,
|
|
clsTransferStatus,
|
|
clsTransferStatusString,
|
|
clsApPrimaryVers,
|
|
clsApBackupVers,
|
|
clsApPredStatus,
|
|
clsApPredFailReason,
|
|
clsApPredRetryCount,
|
|
clsApPredNextRetryTime,
|
|
clsTransferStreamingMode,
|
|
clsTransferStreamingServerAddressType,
|
|
clsTransferStreamingServerAddress,
|
|
clsTransferStreamingPath,
|
|
clsStreamingTransferStart,
|
|
clsTransferHttpStreamingUsername,
|
|
clsTransferHttpStreamingPassword,
|
|
clsTransferHttpStreamingSuggestedVersion,
|
|
clsTransferHttpStreamingLatestVersion,
|
|
clsTransferHttpStreamingCcoPoll,
|
|
clsTransferStreamingServerPort,
|
|
clsTransferStreamingUsername,
|
|
clsTransferStreamingPassword,
|
|
clsTransferStreamingOptimizedJoinEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the System Transfer operation
|
|
configuration on the controller."
|
|
::= { ciscoLwappSysMIBGroups 4 }
|
|
|
|
ciscoLwappSysPortConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clsPortModePhysicalMode,
|
|
clsPortModePhysicalStatus,
|
|
clsPortModeSfpType,
|
|
clsPortUpDownCount,
|
|
clsPortModeMaxSpeed
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represent the system wide
|
|
configuration on the controller."
|
|
::= { ciscoLwappSysMIBGroups 5 }
|
|
|
|
ciscoLwappSysSecurityConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clsSecStrongPwdCaseCheck,
|
|
clsSecStrongPwdConsecutiveCheck,
|
|
clsSecStrongPwdDefaultCheck,
|
|
clsSecStrongPwdAsUserNameCheck,
|
|
clsSecStrongPwdPositionCheck,
|
|
clsSecStrongPwdDigitCheck,
|
|
clsSecStrongPwdMinLength,
|
|
clsSecStrongPwdMinUpperCase,
|
|
clsSecStrongPwdMinLowerCase,
|
|
clsSecStrongPwdMinDigits,
|
|
clsSecStrongPwdMinSpecialChar,
|
|
clsSecWlanCCEnable,
|
|
clsSecUcaplEnable,
|
|
clsSecMgmtUsrLockoutEnable,
|
|
clsSecMgmtUsrLockoutTime,
|
|
clsSecMgmtUsrLockoutAttempts,
|
|
clsSecSnmpv3UsrLockoutEnable,
|
|
clsSecSnmpv3UsrLockoutTime,
|
|
clsSecSnmpv3UsrLockoutAttempts,
|
|
clsSecMgmtUsrLockoutLifetime,
|
|
clsSecSnmpv3UsrLockoutLifetime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represent the system security
|
|
configuration on the controller."
|
|
::= { ciscoLwappSysMIBGroups 6 }
|
|
|
|
ciscoLwappSysIgmpConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cLSysMulticastIGMPSnoopingEnabled,
|
|
cLSysMulticastIGMPSnoopingTimeout,
|
|
cLSysMulticastIGMPQueryInterval,
|
|
cLSysMulticastLLBridgingStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represent the IGMP multicast
|
|
configuration on the controller."
|
|
::= { ciscoLwappSysMIBGroups 7 }
|
|
|
|
ciscoLwappSysSecNotifObjsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clsSecStrongPwdManagementUser,
|
|
clsSecStrongPwdCheckType,
|
|
clsSecStrongPwdCheckOption,
|
|
clsSysAlarmSet,
|
|
clsSysMaxThresholdReachedClear,
|
|
clsTransferCfgAnalyzeResult,
|
|
clsWlcSwVersionBeforeUpgrade,
|
|
clsTransferCfgAnalyzeResult,
|
|
clsWlcSwVersionBeforeUpgrade,
|
|
clsWlcUpgradeFailReason,
|
|
clsWlcSwVersionAfterUpgrade,
|
|
clsPortNumber,
|
|
clsPortSpeed,
|
|
clsPortSlot
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represent the information carried
|
|
by the security related notifications sent by the agent to a
|
|
network management station."
|
|
::= { ciscoLwappSysMIBGroups 8 }
|
|
|
|
ciscoLwappSysNotifsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
ciscoLwappSysInvalidXmlConfig,
|
|
ciscoLwappNoVlanConfigured,
|
|
ciscoLwappStrongPwdCheckNotif,
|
|
ciscoLwappSysCpuUsageHigh,
|
|
ciscoLwappSysMemoryUsageHigh,
|
|
ciscoLwappMaxClientsReached,
|
|
ciscoLwappMaxClientsReached,
|
|
ciscoLwappNMHeartBeat,
|
|
ciscoLwappCfgFileAnalyzeFail,
|
|
ciscoLwappMaxRFIDTagsReached,
|
|
ciscoLwappWlcUpgradeFail,
|
|
ciscoLwappRAIDStatus,
|
|
ciscoLwappPortLinkSpeedTrap
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represent the system config related
|
|
notifications sent by the agent to a network management
|
|
station."
|
|
::= { ciscoLwappSysMIBGroups 9 }
|
|
|
|
ciscoLwappSysNotifControlGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clsSecStrongPwdCheckTrapEnabled,
|
|
clsMaxClientsTrapEnabled,
|
|
clsMaxRFIDTagsTrapEnabled,
|
|
clsNacAlertTrapEnabled,
|
|
clsMfpTrapEnabled
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represent the flags to control the
|
|
generation of notification."
|
|
::= { ciscoLwappSysMIBGroups 10 }
|
|
|
|
ciscoLwappSysConfigGroupVer1 OBJECT-GROUP
|
|
OBJECTS {
|
|
clsConfigProductBranchVersion,
|
|
clsConfigDhcpProxyEnabled,
|
|
clsCoreDumpTransferEnable,
|
|
clsCoreDumpTransferMode,
|
|
clsCoreDumpFileName,
|
|
clsCoreDumpUserName,
|
|
clsCoreDumpPassword,
|
|
clsConfigMulticastEnabled,
|
|
clsEmergencyImageVersion,
|
|
clsNMHeartBeatEnable,
|
|
clsNMHeartBeatInterval,
|
|
clsSysControllerCpuUsageThreshold,
|
|
clsSysControllerMemoryUsageThreshold,
|
|
clsSysApCpuUsageThreshold,
|
|
clsSysApMemoryUsageThreshold,
|
|
clsTrapNameInBlacklist,
|
|
clsTrapBlacklistRowStatus,
|
|
clsLinkLocalBridgingEnabled,
|
|
clsNetworkHttpProfCustomPort,
|
|
clsWGBForcedL2RoamEnabled,
|
|
clsCrashSystem,
|
|
clsConfigCaleaEnabled,
|
|
clsConfigCaleaServerIpAddr,
|
|
clsConfigCaleaServerIpType,
|
|
clsConfigCaleaPort,
|
|
clsConfigCaleaAccountingInterval,
|
|
clsConfigCaleaVenue,
|
|
clSysLogIPSecStatus,
|
|
clSysLogIPSecProfName,
|
|
clsRAIDStatus,
|
|
clsRAIDRebuildPercentage,
|
|
clsSysPingTestIPAddressType,
|
|
clsSysPingTestIPAddress,
|
|
clsSysPingTestSendCount,
|
|
clsSysPingTestReceivedCount,
|
|
clsSysPingTestStatus,
|
|
clsSysPingTestMaxTimeInterval,
|
|
clsSysPingTestMinTimeInterval,
|
|
clsSysPingTestAvgTimeInterval,
|
|
clsSysPingTestRowStatus,
|
|
clsSensorTemperature,
|
|
cLSysBroadcastForwardingEnabled,
|
|
cLSysLagModeEnabled,
|
|
clsCoreDumpServerIPAddressType,
|
|
clsAlarmHoldTime,
|
|
clsAlarmTrapRetransmitInterval,
|
|
clsSysLogEnabled,
|
|
clsSysLogLevel,
|
|
clsIconCfgFileType,
|
|
clsIconCfgLangCode,
|
|
clsIconCfgWidth,
|
|
clsIconCfgHeight,
|
|
clsIconCfgRowStatus,
|
|
clsNetworkHttpProxyIpType,
|
|
clsNetworkHttpProxyIp,
|
|
clsNetworkDnsServerIpType,
|
|
clsNetworkDnsServerIp,
|
|
cLSysLagModeEnabled,
|
|
clsNetworkHttpProxyPort,
|
|
clsCoreDumpServerIPAddress,
|
|
clsAllCpuUsage,
|
|
clsUSBMode
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This collection of objects represent the system wide
|
|
configuration on the controller."
|
|
::= { ciscoLwappSysMIBGroups 11 }
|
|
|
|
ciscoLwappSysStatsConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clsSysRealtimeStatsTimer,
|
|
clsSysStatsSamplingInterval,
|
|
clsSysNormalStatsTimer,
|
|
clsSysStatsAverageInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represents the
|
|
statistics intervals configtation
|
|
on the controller."
|
|
::= { ciscoLwappSysMIBGroups 12 }
|
|
|
|
ciscoLwappSysInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clsSysFlashSize,
|
|
clsSysMemoryType,
|
|
clsSysMaxClients,
|
|
clsSysApConnectCount,
|
|
clsSysNetId,
|
|
clsSysCurrentMemoryUsage,
|
|
clsSysAverageMemoryUsage,
|
|
clsSysCurrentCpuUsage,
|
|
clsSysAverageCpuUsage,
|
|
clsSysCpuType,
|
|
clsMaxRFIDTagsCount,
|
|
clsMaxClientsCount,
|
|
clsApAssocFailedCount,
|
|
clsCurrentPortalClientCount,
|
|
clsCurrentOnlineUsersCount,
|
|
clsSysAbnormalOfflineCount,
|
|
clsSysFlashType,
|
|
clsSysOpenUsersCount,
|
|
clsSysWepPskUsersCount,
|
|
clsSysPeapSimUsersCount,
|
|
clsSysPeapSimReqCount,
|
|
clsSysPeapSimReqSuccessCount,
|
|
clsSysPeapSimReqFailureCount,
|
|
clsSysNasId,
|
|
clsSysCoChannelTrapRssiThreshold,
|
|
clsSysAdjChannelTrapRssiThreshold,
|
|
clsSysClientTrapRssiThreshold,
|
|
clsSysCmxActiveConnections,
|
|
cLSysLagModeInTransition
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represent System Information
|
|
configuration on the controller."
|
|
::= { ciscoLwappSysMIBGroups 13 }
|
|
|
|
ciscoLwappLyncInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
clsLyncState,
|
|
clsLyncPort,
|
|
clsLyncProtocol
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represent System Information
|
|
configuration on the controller."
|
|
::= { ciscoLwappSysMIBGroups 14 }
|
|
|
|
ciscoLwappSysMulticastMLDGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cLSysMulticastMLDSnoopingEnabled,
|
|
cLSysMulticastMLDSnoopingTimeout,
|
|
cLSysMulticastMLDQueryInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represent Multicast MLD
|
|
configuration on the controller."
|
|
::= { ciscoLwappSysMIBGroups 15 }
|
|
|
|
ciscoLwappSysConfigGroupVer2 OBJECT-GROUP
|
|
OBJECTS {
|
|
clsConfigProductBranchVersion,
|
|
clsConfigDhcpProxyEnabled,
|
|
clsCoreDumpTransferEnable,
|
|
clsCoreDumpTransferMode,
|
|
clsCoreDumpFileName,
|
|
clsCoreDumpUserName,
|
|
clsCoreDumpPassword,
|
|
clsConfigMulticastEnabled,
|
|
clsEmergencyImageVersion,
|
|
clsNMHeartBeatEnable,
|
|
clsNMHeartBeatInterval,
|
|
clsSysControllerCpuUsageThreshold,
|
|
clsSysControllerMemoryUsageThreshold,
|
|
clsSysApCpuUsageThreshold,
|
|
clsSysApMemoryUsageThreshold,
|
|
clsTrapNameInBlacklist,
|
|
clsTrapBlacklistRowStatus,
|
|
clsLinkLocalBridgingEnabled,
|
|
clsNetworkHttpProfCustomPort,
|
|
clsWGBForcedL2RoamEnabled,
|
|
clsCrashSystem,
|
|
clsConfigCaleaEnabled,
|
|
clsConfigCaleaServerIpAddr,
|
|
clsConfigCaleaServerIpType,
|
|
clsConfigCaleaPort,
|
|
clsConfigCaleaAccountingInterval,
|
|
clsConfigCaleaVenue,
|
|
clSysLogIPSecStatus,
|
|
clSysLogIPSecProfName,
|
|
clsRAIDStatus,
|
|
clsRAIDRebuildPercentage,
|
|
clsSysPingTestIPAddressType,
|
|
clsSysPingTestIPAddress,
|
|
clsSysPingTestSendCount,
|
|
clsSysPingTestReceivedCount,
|
|
clsSysPingTestStatus,
|
|
clsSysPingTestMaxTimeInterval,
|
|
clsSysPingTestMinTimeInterval,
|
|
clsSysPingTestAvgTimeInterval,
|
|
clsSysPingTestRowStatus,
|
|
clsSensorTemperature,
|
|
cLSysBroadcastForwardingEnabled,
|
|
cLSysLagModeEnabled,
|
|
clsCoreDumpServerIPAddressType,
|
|
clsAlarmHoldTime,
|
|
clsAlarmTrapRetransmitInterval,
|
|
clsSysLogEnabled,
|
|
clsSysLogLevel,
|
|
clsIconCfgFileType,
|
|
clsIconCfgLangCode,
|
|
clsIconCfgWidth,
|
|
clsIconCfgHeight,
|
|
clsIconCfgRowStatus,
|
|
clsNetworkHttpProxyIpType,
|
|
clsNetworkHttpProxyIp,
|
|
clsNetworkDnsServerIpType,
|
|
clsNetworkDnsServerIp,
|
|
cLSysLagModeEnabled,
|
|
clsNetworkHttpProxyPort,
|
|
clsCoreDumpServerIPAddress,
|
|
clsAllCpuUsage,
|
|
clsUSBMode,
|
|
clsLiStatus,
|
|
clsLiReportingInterval,
|
|
clsLiAddressType,
|
|
clsLiAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This collection of objects represent the system wide
|
|
configuration on the controller."
|
|
::= { ciscoLwappSysMIBGroups 16 }
|
|
|
|
END
|
|
|