david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
main
mibs/MIBS/cisco/CISCO-RTTMON-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

11182 lines
419 KiB
Plaintext
Raw Permalink Blame History

-- $Id: CISCO-RTTMON-MIB.my,v 3.1.4.4 1996/09/04 17:34:50 lmetzger Exp $
-- $Source: /release/112/cvs/Xsys/MIBS/CISCO-RTTMON-MIB.my,v $
-- *****************************************************************
-- Response Time Monitor Mib.
--
-- March 1996, Larry Metzger
--
-- Copyright (c) 1995-2012, 2014-2016 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
-- $Log: CISCO-RTTMON-MIB.my,v $
-- %DNP% Revision 3.1.4.4 1996/09/04 17:34:50 lmetzger
-- %DNP% CSCdi68018: Second Update to Description in RTTMON mib
-- %DNP% Branch: California_branch
-- %DNP%
-- %DNP% Revision 3.1.4.3 1996/08/16 18:38:07 lmetzger
-- %DNP% CSCdi66311: Update Descriptions in RTTMON mib
-- %DNP% Branch: California_branch
-- %DNP%
-- %DNP% Revision 3.1.4.2 1996/06/11 19:38:37 snyder
-- %DNP% CSCdi60118: MIB doc spellink errors
-- %DNP% Branch: California_branch
-- %DNP%
-- %DNP% Revision 3.1.4.1 1996/05/17 10:38:45 ppearce
-- %DNP% Merge IbuMod into Calif
-- %DNP%
-- %DNP% Revision 3.1.2.1 1996/03/22 19:10:10 lmetzger
-- %DNP% Initial Version of Response Time Reporter
-- %DNP%
-- %DNP% Revision 3.1 1996/03/20 01:05:49 lmetzger
-- %DNP% Placeholder for IbuMod_Calif_branch
-- %DNP%
-- *****************************************************************
-- $Endlog$
--
-- %DNP% FYI: Lines containing a comment starting with the "Do Not
-- %DNP% Publish" prefix "%DNP%" (such as these) are automagicially
-- %DNP% stripped from MIBS prior to publishing on ftp and cio, and
-- %DNP% should be used for comments intended for cisco engineering
-- %DNP% eyes only, or for new product identifiers that are not yet
-- %DNP% announce
CISCO-RTTMON-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Integer32,
Unsigned32,
Counter32,
Gauge32,
TimeTicks
FROM SNMPv2-SMI
NOTIFICATION-GROUP,
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
StorageType,
DisplayString,
TruthValue,
RowStatus,
TimeInterval,
TimeStamp,
MacAddress
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InetAddress,
InetAddressType
FROM INET-ADDRESS-MIB
VlanId
FROM Q-BRIDGE-MIB
Dscp
FROM DIFFSERV-DSCP-TC
InterfaceIndexOrZero
FROM IF-MIB
QosLayer2Cos
FROM CISCO-QOS-PIB-MIB
CfmMepid
FROM CISCO-ETHER-CFM-MIB
RttReset,
RttMonOperation,
RttResponseSense,
RttMonRttType,
RttMplsVpnMonRttType,
RttMplsVpnMonLpdFailureSense,
RttMplsVpnMonLpdGrpStatus,
RttMonProtocol,
RttMonCodecType,
RttMonLSPPingReplyMode,
RttMonTargetAddress,
RttMonReactVar,
RttMonScheduleStartType
FROM CISCO-RTTMON-TC-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoRttMonMIB MODULE-IDENTITY
LAST-UPDATED "201604140000Z"
ORGANIZATION "Cisco IOS"
CONTACT-INFO
"Cisco Systems, Inc.
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
Tel: +1 800 553 NETS
cs-ipsla@cisco.com"
DESCRIPTION
"This module defines a MIB for Round Trip Time
(RTT) monitoring of a list of targets, using a
variety of protocols.
The table structure overview is a follows (t:
indicates a table, at: indicates an augmented
table, and it: indicates table with the same
indices/control as parent table):
RTTMON MIB
|--- Application Group
| |--- Application Identity
| |--- Application Capabilities
| |--- Application Reset
| |t-- Supported RTT Types
| |--- Truth Value
| |t-- Supported Protocols
| |--- Truth Value
| |t-- Application Preconfigured
| |--- Script Names
| |--- File Paths
| |--- Responder control
| |t-- Control Protocol Authentication
|
|--- Overall Control Group
| |t-- Master Definitions Table
| | |--- Global Configuration Definitions
| | |--- Config for a single RTT Life
| | |it- Echo Specific Configuration
| | |it- Echo Path Hop Address Configuration
| | |it- File I/O Specific Configuration
| | |it- Script Specific Configuration
| | |at- Schedule Configuration
| | |at- Reaction Specific Config
| | |at- Statistics Capture Configuration
| | |at- History Collection Configuration
| | |at- Monitoring Operational State
| | |at- Last RTT operation
| |
| |t-- Reaction Trigger Table
| |at- Reaction Trigger Operational State
|
|--- Statistics Collection Group
| |t-- Statistics Capture Table
| |--- Captured Statistics
| |--- Path Information
| |--- Distribution Capture
| |--- Mean and Deviation Capture
| |it- Statistics Collection Table
| |it- Statistics Totals Table
| |t-- HTTP Stats Table
| |t-- Jitter Stats Table
|
|--- History Collection Group
| |t-- History Collection Table
| |-- Path Information
| |-- Completion Information per operation
|
|--- Latest Operation Group
| |t-- Latest HTTP Oper Table
| |t-- Latest Jitter Oper Table
DEFINITIONS:
conceptual RTT control row -
This is a row in the 'Overall Control
Group'. This row is indexed via the
rttMonCtrlAdminIndex object. This row
is spread across multiple real tables
in the 'Overall Control Group'.
probe -
This is the entity that executes via a
conceptual RTT control row and populates
a conceptual statistics row and a
conceptual history row.
Rtt operation -
This is a single operation performed by
a probe. This operation can be a single
Rtt attempt/completion or a group of Rtt
attempts/completions that produce one
operation table entry.
ARR Protocol Definition:
The format of the RTT Asymmetric Request/Responses
(ARR) protocol is as follows:
The ARR Header (total of 12 octets):
4 octet -> eyecatcher: 'WxYz'
1 octet -> version : 0x01 - protocol version
1 octet -> command : 0x01 - logoff request
0x02 - echo request
0x03 - echo response
0x04 - software version request
0x05 - software version response
2 octet -> sequence number (Network Byte Order)
4 octet -> response data size (Network Byte Order)
The ARR Data:
n octets -> request/response data
: 'AB..ZAB..ZAB..'
For software version request/response the
protocol version octet will contain the version
number of the responder. Thus the sequence
number, etc will not be included.
For snaLU0EchoAppl and snaLU2EchoAppl all character
fields will be in EBCDIC.
The response data should be appended to the
origin request data. This allows data
verification to check the data that flows in
both directions. If the response data size is
smaller than the request data size the original
request data will be truncated.
An example would be:
Request: / Response:
'WxYz' / 'WxYz'
0x01 / 0x01
0x02 / 0x03
0x0001 / 0x0001
0x00000008 / 0x00000008
'ABCDEF' / 'ABCDEFGH'
NOTE: We requested 8 bytes in the response and
the response had 8 bytes. The size of the
request data has no correlation to the
size of the response data.
NOTE: For native RTT request/response (i.e.
ipIcmpecho) operations both the 'Header'
and 'Data' will be included. Only the
'sequence number' in the Header will be
valid.
NOTE: For non-connection oriented protocol the
initial RTT request/response operation will
be preceded with an RTT request/response
operation to the target address to force
path exploration and to prove
connectivity. The History collection table
will contain these responses, but the
Statistics capture table will omit them to
prevent skewed results."
REVISION "201604140000Z"
DESCRIPTION
"Refined rttMonCtrlAdminFrequency range in the new compliance
statement from Integer32 (0..604800) to (1..604800). This
change was advertised in revision 200405180000Z but was not
implemented.
Refined range for the following port objects to exclude value 0
rttMonEchoAdminTargetPort,
rttMonEchoAdminSourcePort,
rttMonEchoAdminEmulateSourcePort,
rttMonEchoAdminEmulateTargetPort
Added following objects to support random start-time feature
for scheduling group and sla probes.
rttMonScheduleAdminStartType,
rttMonScheduleAdminStartDelay,
rttMonGrpScheduleAdminStartType,
rttMonGrpScheduleAdminStartDelay
Added following objects to report over threshold statistics
for jitter probes
rttMonLatestJitterOperNumOverThresh,
rttMonJitterStatsNumOverThresh
Deprecated rttMonCtrlAdminTag and replaced with
rttMonCtrlAdminLongTag
Added new compliance
ciscoRttMonMibComplianceRev23."
REVISION "201404100000Z"
DESCRIPTION
"Added following objects for Fabric Path Echo
probe
rttMonEchoAdminTargetSwitchId,
rttMonEchoAdminProfileId,
rttMonEchoAdminOutputInterface
Added new compliance
ciscoRttMonMibComplianceRev22."
REVISION "201208160000Z"
DESCRIPTION
"Added following objects to support Y1731 Synthetic Loss
Measurement
rttMonEchoAdminEnableBurst,
rttMonEchoAdminAggBurstCycles,
rttMonEchoAdminLossRatioNumFrames,
rttMonEchoAdminAvailNumFrames
Added following object to support improving accuracy for jitter
probes measurement.
rttMonEchoAdminTstampOptimization
Deprecated rttMonScheduleAdminConceptRowAgeout and replace
with rttMonScheduleAdminConceptRowAgeoutV2.
Deprecated rttMonControlEnableErrors, rttMonStatsRetrieveErrors
and replace with rttMonStatsCollectCtrlEnErrors,
rttMonStatsCollectRetrieveErrors.
Modified the descriptions for
rttMonLatestJitterOperMOS
rttMonLatestJitterOperICPIF,
rttMonJitterStatsMinOfMOS
rttMonJitterStatsMinOfICPIF,
rttMonJitterStatsMaxOfMOS
rttMonJitterStatsMaxOfICPIF
Added new compliance
ciscoRttMonMibComplianceRev21."
REVISION "201109150000Z"
DESCRIPTION
"Added following objects to rttMonEchoAdmin to support
Y1731 extensions.
- rttMonEchoAdminTargetMacAddress,
- rttMonEchoAdminSourceMacAddress and
- rttMonEchoAdminSourceMPID"
REVISION "201102210000Z"
DESCRIPTION
"Added four new objects rttMonEchoAdminEmulateSourceAddress,
rttMonEchoAdminEmulateSourcePort,
rttMonEchoAdminEmulateTargetAddress,
rttMonEchoAdminEmulateTargetPort to RttMonEchoAdminEntry."
REVISION "201010180000Z"
DESCRIPTION
"Added three new objects rttMonEchoAdminDscp,
rttMonEchoAdminReserveDsp, rttMonEchoAdminInputInterface"
REVISION "201006040000Z"
DESCRIPTION
"Changes added for video operation:
-Added new MIB object rttMonEchoAdminVideoTrafficProfile
-Changed the maximum range of rttMonEchoAdminCallDuration to 600
-Changed the minimum range of rttMonEchoAdminCallDuration to 1
from 10"
REVISION "200904070000Z"
DESCRIPTION
"- Added rttMonEchoAdminTargetMEPPort object in
rttMonEchoAdminEntry."
REVISION "200803240000Z"
DESCRIPTION
"- Added nine new objects rttMonLatestJitterOperRTTSumHigh,
rttMonLatestJitterOperRTTSum2High,
rttMonLatestJitterOperOWSumSDHigh,
rttMonLatestJitterOperOWSum2SDHigh,
rttMonLatestJitterOperOWSumDSHigh,
rttMonLatestJitterOperOWSum2DSHigh,
rttMonJitterStatsRTTSumHigh, rttMonJitterStatsOWSumSDHigh,
rttMonJitterStatsOWSumDSHigh.
- Modified the unit and the description of
rttMonLatestRttOperCompletionTime,
rttMonJitterStatsRTTSum, rttMonJitterStatsOWSumSD,
rttMonJitterStatsOWSumDS, rttMonLatestJitterOperRTTSum,
rttMonLatestJitterOperRTTSum2, rttMonLatestJitterOperOWSumSD,
rttMonLatestJitterOperOWSumDS, rttMonLatestJitterOperOWSum2SD,
rttMonLatestJitterOperOWSum2DS."
REVISION "200801060000Z"
DESCRIPTION
"Added a new object rttMonEchoAdminTargetEVC."
REVISION "200612080000Z"
DESCRIPTION
"Added a new object rttMonCtrlAdminGroupName to support the
auto measure project. Group Name will be shown for auto
generated operations."
REVISION "200606080000Z"
DESCRIPTION
"Added a new rttMonRttType named as lspPingPseudowire.
Added an object rttMonEchoAdminLSPVccvID to support
lspPingPseudowire.
Change the default value of rttMplsVpnMonTypeLpdScanPeriod
from 1 to 240."
REVISION "200603020000Z"
DESCRIPTION
"Added two new rttMonRttType's ethernetPing and ethernetJitter.
Added four objects rttMonEchoAdminTargetMPID,
rttMonEchoAdminTargetVLAN, rttMonEchoAdminTargetDomainName
and rttMonEchoAdminEthernetCOS in rttMonEchoAdminEntry to
support ethernetPing and ethernetJitter.
Change the default value of rttMplsVpnMonTypeLpdScanPeriod
from 0 to 1.
Modified the range of rttMonApplProbeCapacity and
rttMonApplNumCtrlAdminEntry to 1 .. 2147483647.
Modified the range of rttMonLatestJitterOperMOS,
rttMonJitterStatsMinOfMOS and rttMonJitterStatsMaxOfMOS to
(0|100 .. 500).
Modified the SYNTAX of rttMonCtrlAdminOwner to OCTET STRING
because OwnerString is deprecated."
REVISION "200508110000Z"
DESCRIPTION
"- TEXTUAL Conventions previously defined in the MIB are defined
in CISCO-RTTMON-TC-MIB."
REVISION "200504210000Z"
DESCRIPTION
"- Added new objects given in ciscoCtrlGroupRev4 to
rttMonGrpScheduleAdminTable.
- Changed description of object rttMonHTTPStatsRTTMax."
REVISION "200501040000Z"
DESCRIPTION
"Added two new rttMonRttType's rtp and lspGroup. Added a new
object rttMonApplLpdGrpStatsReset to reset the LPD Group Stats.
Added rttMonLpdGrpStatsTable for supporting LSP Path Discovery.
Added two new notifications rttMonLpdDiscoveryNotification
and rttMonLpdGrpStatusNotification.
Added and modified descriptions of some objects in
rttMplsVpnMonCtrlTable, rttMplsVpnMonTypeTable and
rttMplsVpnMonReactTable for LSP Path Discovery.
Added 6 options in the rttMonReactVar.
Added rttMonEchoAdminSourceVoicePort and
rttMonEchoAdminCallDuration in rttMonEchoAdminTable."
REVISION "200408260000Z"
DESCRIPTION
"Added a table rttMonReactTable, which defines the
the reaction configurations for the probes.
Deprecated the old reaction table rttMonReactAdminTable.
This is replaced by the new table (rttMonReactTable).
Depreacted the notification types
rttMonConnectionChangeNotification
rttMonTimeoutNotification
rttMonThresholdNotification
rttMonVerifyErrorNotification
Added new notification type rttMonNotification.
Added two objects, rttMonGrpScheduleAdminFreqMax
and rttMonGrpScheduleAdminFreqMin to table
rttMonGrpScheduleAdminTable."
REVISION "200405180000Z"
DESCRIPTION
"- Add the following fields for VoIP GK registration delay:
RttMonEchoAdminEntry:
rttMonEchoAdminGKRegistration
- Add the following fields for VoIP Post dial delay:
RttMonOperation:
voipDTAlertRinging(6),
voipDTConnectOK(7)
RttMonRttType:
voip(13)
RttMonProtocol:
voipAppl(31)
RttMonEchoAdminEntry:
rttMonEchoAdminCalledNumber
rttMonEchoAdminDetectPoint
- Add HTTP code 301, 302 as non-error scenario.
- Modify description for rttMonEchoAdminNameServer:
it is applicable for DNS and HTTP probe.
- Modify rttMonCtrlAdminFrequency range
from Integer32 (0..604800) to (1..604800)
- Added following new objects for jitter probe precision
and other improvements:
rttMonEchoAdminPrecision, rttMonEchoAdminProbePakPriority,
rttMonJitterStatsIAJOut, rttMonJitterStatsIAJIn,
rttMonJitterStatsAvgJitter, rttMonJitterStatsAvgJitterSD,
rttMonJitterStatsAvgJitterDS, rttMonJitterStatsUnSyncRTs,
rttMonLatestJitterOperIAJIn, rttMonLatestJitterOperAvgJitter,
rttMonLatestJitterOperAvgSDJ, rttMonLatestJitterOperAvgDSJ,
rttMonLatestJitterOperOWAvgSD, rttMonLatestJitterOperOWAvgDS,
rttMonLatestJitterOperIAJOut, rttMonLatestJitterOperNTPState,
rttMonEchoAdminOWNTPSyncTolAbs,
rttMonEchoAdminOWNTPSyncTolPct,
rttMonEchoAdminOWNTPSyncTolType,
rttMonLatestJitterOperUNSyncRTs"
REVISION "200401200000Z"
DESCRIPTION
"Created new tables for Auto SAA L3 MPLS VPN.
rttMplsVpnMonCtrlTable
rttMplsVpnMonTypeTable
rttMplsVpnMonScheduleTable
rttMplsVpnMonReactTable.
Modified MIB for creation of echo and pathecho operations based
on MPLS LSP Ping."
REVISION "200308110000Z"
DESCRIPTION
"Added 1 object rttMonScheduleAdminRttRecurring to the
rttMonScheduleAdminTable. Added a new table
rttMonGrpScheduleAdminTable for group scheduling. This table
contains the following objects
rttMonGrpScheduleAdminIndex
rttMonGrpScheduleAdminProbes
rttMonGrpScheduleAdminPeriod
rttMonGrpScheduleAdminFrequency
rttMonGrpScheduleAdminLife
rttMonGrpScheduleAdminAgeout
rttMonGrpScheduleAdminStatus.
Modified the default value of rttMonReactTriggerAdminStatus
from createAndGo to no default value. Corrected the Revision
clause specified for the existing and all the earlier
submissions."
REVISION "200305210000Z"
DESCRIPTION
"Range for rttMonLatestJitterOperMOS, rttMonJitterStatsMinOfMOS
and rttMonJitterStatsMaxOfMOS to be changed to 100..500
instead of 1..5. Modifying the range of rttMonApplProbeCapacity
and rttMonApplNumCtrlAdminEntry to 1..10000.Added value other(0)
for RttResponseSense and changed the range of objects
rttMonLatestRttOperApplSpecificSense and
rttMonHistoryCollectionApplSpecificSense to 0..2147483647.
Added range for rttMonApplAuthIndex."
REVISION "200304150000Z"
DESCRIPTION
"Removed default values from
rttMonEchoAdminCodecInterval
rttMonEchoAdminCodecPayload
rttMonEchoAdminCodecNumPackets.
Corrected some typos in the earliar revision."
REVISION "200303120000Z"
DESCRIPTION
"Added 5 objects in the rttMonEchoAdminTable to support
codec configuration.
Added few objects in rttMonLatestJitterOperTable and
rttMonJitterStatsTable for ICPIF (Calculated Planning
Impairment Factor) and MOS (Mean Opinion Score) scores."
REVISION "200011030000Z"
DESCRIPTION
"deprecated 4 objects in the rttMonJitterStatsTable
and added the same objects with a SYNTAX of Gauge32.
Also added the capability to specify a VrfName."
REVISION "9906150000Z"
DESCRIPTION
"created rttMonAuthTable."
::= { ciscoMgmt 42 }
-- Round Trip Time (RTT) Monitor MIB Objects
ciscoRttMonObjects OBJECT IDENTIFIER
::= { ciscoRttMonMIB 1 }
-- Round Trip Time Monitoring Object Groups
rttMonAppl OBJECT IDENTIFIER
::= { ciscoRttMonObjects 1 }
rttMonCtrl OBJECT IDENTIFIER
::= { ciscoRttMonObjects 2 }
rttMonStats OBJECT IDENTIFIER
::= { ciscoRttMonObjects 3 }
rttMonHistory OBJECT IDENTIFIER
::= { ciscoRttMonObjects 4 }
rttMonLatestOper OBJECT IDENTIFIER
::= { ciscoRttMonObjects 5 }
-- GLOBAL RTT MONITORING VARIABLES
rttMonApplVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Round Trip Time monitoring application version
string.
The format will be:
'Version.Release.Patch-Level: Textual-Description'
For example: '1.0.0: Initial RTT Application'"
::= { rttMonAppl 1 }
rttMonApplMaxPacketDataSize OBJECT-TYPE
SYNTAX Integer32 (0..16384)
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum size of the data portion an echo
packet supported by this RTT application. This is
the maximum value that can be specified by
(rttMonEchoAdminPktDataRequestSize + ARR Header)
or
(rttMonEchoAdminPktDataResponseSize + ARR Header)
in the rttMonCtrlAdminTable.
This object is undefined for conceptual RTT
control rows when the RttMonRttType object is set
to 'fileIO' or 'script'."
::= { rttMonAppl 2 }
rttMonApplTimeOfLastSet OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last time at which a set operation occurred
on any of the objects in this MIB. The managing
application can inspect this value in order to
determine whether changes have been made without
retrieving the entire Administration portion of
this MIB.
This object applies to all settable objects in this
MIB, including the 'Reset' objects that could clear
saved history/statistics."
::= { rttMonAppl 3 }
rttMonApplNumCtrlAdminEntry OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object defines the maximum number of entries
that can be added to the rttMonCtrlAdminTable. It
is calculated at the system init time. The value
is impacted when rttMonApplFreeMemLowWaterMark is changed."
::= { rttMonAppl 4 }
rttMonApplReset OBJECT-TYPE
SYNTAX RttReset
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to 'reset' the entire RTT application
goes through a reset sequence, making a best
effort to revert to its startup condition. Any
and all rows in the Overall Control Group will be
immediately deleted, together with any associated
rows in the Statistics Collection Group, and
History Collection Group. All open connections
will also be closed. Finally the
rttMonApplPreConfigedTable will reset (see
rttMonApplPreConfigedReset)."
::= { rttMonAppl 5 }
rttMonApplPreConfigedReset OBJECT-TYPE
SYNTAX RttReset
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"When set to 'reset' the RTT application will
reset the Application Preconfigured MIB section.
This will force the RTT application to delete all
entries in the rttMonApplPreConfigedTable and then
to repopulate the table with the current configuration.
This provides a mechanism to load and unload user
scripts and file paths."
::= { rttMonAppl 6 }
-- Supported RTT Types.
rttMonApplSupportedRttTypesTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonApplSupportedRttTypesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of which contains the supported Rtt
Monitor Types.
See the RttMonRttType textual convention for
the definition of each type."
::= { rttMonAppl 7 }
rttMonApplSupportedRttTypesEntry OBJECT-TYPE
SYNTAX RttMonApplSupportedRttTypesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list that presents the valid Rtt Monitor
Types."
INDEX { rttMonApplSupportedRttTypes }
::= { rttMonApplSupportedRttTypesTable 1 }
RttMonApplSupportedRttTypesEntry ::= SEQUENCE {
rttMonApplSupportedRttTypes RttMonRttType,
rttMonApplSupportedRttTypesValid TruthValue
}
rttMonApplSupportedRttTypes OBJECT-TYPE
SYNTAX RttMonRttType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indexes the supported
'RttMonRttType' types."
::= { rttMonApplSupportedRttTypesEntry 1 }
rttMonApplSupportedRttTypesValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object defines the supported
'RttMonRttType' types."
::= { rttMonApplSupportedRttTypesEntry 2 }
-- Supported Protocols.
rttMonApplSupportedProtocolsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonApplSupportedProtocolsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of which contains the supported Rtt
Monitor Protocols.
See the RttMonProtocol textual convention
for the definition of each protocol."
::= { rttMonAppl 8 }
rttMonApplSupportedProtocolsEntry OBJECT-TYPE
SYNTAX RttMonApplSupportedProtocolsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list that presents the valid Rtt Monitor
Protocols."
INDEX { rttMonApplSupportedProtocols }
::= { rttMonApplSupportedProtocolsTable 1 }
RttMonApplSupportedProtocolsEntry ::= SEQUENCE {
rttMonApplSupportedProtocols RttMonProtocol,
rttMonApplSupportedProtocolsValid TruthValue
}
rttMonApplSupportedProtocols OBJECT-TYPE
SYNTAX RttMonProtocol
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indexes the supported
'RttMonProtocol' protocols."
::= { rttMonApplSupportedProtocolsEntry 1 }
rttMonApplSupportedProtocolsValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object defines the supported
'RttMonProtocol' protocols."
::= { rttMonApplSupportedProtocolsEntry 2 }
-- Preconfigured Script Names and File IO targets.
rttMonApplPreConfigedTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonApplPreConfigedEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A table of which contains the previously
configured Script Names and File IO targets.
These Script Names and File IO targets are installed
via a different mechanism than this application, and
are specific to each platform."
::= { rttMonAppl 9 }
rttMonApplPreConfigedEntry OBJECT-TYPE
SYNTAX RttMonApplPreConfigedEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A list of objects that describe the previously
configured Script Names and File IO targets."
INDEX {
rttMonApplPreConfigedType,
rttMonApplPreConfigedName
}
::= { rttMonApplPreConfigedTable 1 }
RttMonApplPreConfigedEntry ::= SEQUENCE {
rttMonApplPreConfigedType INTEGER,
rttMonApplPreConfigedName DisplayString,
rttMonApplPreConfigedValid TruthValue
}
rttMonApplPreConfigedType OBJECT-TYPE
SYNTAX INTEGER {
filePath(1),
scriptName(2)
}
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This is the type of value being stored in the
rttMonApplPreConfigedName object."
::= { rttMonApplPreConfigedEntry 2 }
rttMonApplPreConfigedName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This is either one of the following depending on the
value of the rttMonApplPreConfigedType object:
- The file path to a server. One of these file paths
must be used when defining an entry in the
rttMonFileIOAdminTable table with 'fileIO' as the
value of the rttMonCtrlAdminRttType object.
- The script name to be used when generating RTT
operations. One of these script names must be used
when defining an entry in the rttMonScriptAdminTable
table with 'script' as the value of the
rttMonCtrlAdminRttType object.
NOTE: For script names, command line parameters
can follow these names in the
rttMonScriptAdminTable table."
::= { rttMonApplPreConfigedEntry 3 }
rttMonApplPreConfigedValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"When this row exists, this value will be 'true'.
This object exists only to create a valid row in this
table."
::= { rttMonApplPreConfigedEntry 4 }
rttMonApplProbeCapacity OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object defines the number of new probes that can be
configured on a router. The number depends on the value
of rttMonApplFreeMemLowWaterMark, free bytes
available on the router and the system configured
rttMonCtrlAdminEntry number.
Equation:
rttMonApplProbeCapacity =
MIN(((Free_Bytes_on_the_Router - rttMonApplFreeMemLowWaterMark)/
Memory_required_by_each_probe),
rttMonApplNumCtrlAdminEntry -
Num_of_Probes_already_configured))"
::= { rttMonAppl 10 }
rttMonApplFreeMemLowWaterMark OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the amount of free memory a router must
have in order to configure RTR. If RTR found out that the
memory is falling below this mark, it will not allow new
probes to be configured.
This value should not be set higher (or very close to) than
the free bytes available on the router."
::= { rttMonAppl 11 }
rttMonApplLatestSetError OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An error description for the last error message caused
by set.
Currently, it includes set error caused due to setting
rttMonApplFreeMemLowWaterMark greater than the available
free memory on the router or not enough memory left to
create new probes."
::= { rttMonAppl 12 }
rttMonApplResponder OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable RTR responder on the router."
::= { rttMonAppl 13 }
-- MD5 Authentication for RTR Control Protocol
rttMonApplAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonApplAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the definitions for key-strings
that will be used in authenticating RTR Control Protocol."
::= { rttMonAppl 14 }
rttMonApplAuthEntry OBJECT-TYPE
SYNTAX RttMonApplAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list that presents the valid parameters for Authenticating
RTR Control Protocol."
INDEX { rttMonApplAuthIndex }
::= { rttMonApplAuthTable 1 }
RttMonApplAuthEntry ::= SEQUENCE {
rttMonApplAuthIndex Integer32,
rttMonApplAuthKeyChain DisplayString,
rttMonApplAuthKeyString1 DisplayString,
rttMonApplAuthKeyString2 DisplayString,
rttMonApplAuthKeyString3 DisplayString,
rttMonApplAuthKeyString4 DisplayString,
rttMonApplAuthKeyString5 DisplayString,
rttMonApplAuthStatus RowStatus
}
rttMonApplAuthIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies a row in the rttMonApplAuthTable.
This is a pseudo-random number selected by the management
station when creating a row via the rttMonApplAuthStatus
object. If the pseudo-random number is already in use, an
'inconsistentValue' is returned. Currently, only one row
can be created."
::= { rttMonApplAuthEntry 1 }
rttMonApplAuthKeyChain OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..48))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which represents the key-chain name. If multiple
key-strings are specified, then the authenticator will
alternate between the specified strings."
::= { rttMonApplAuthEntry 2 }
rttMonApplAuthKeyString1 OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..48))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which represents a key-string name whose id is 1."
::= { rttMonApplAuthEntry 3 }
rttMonApplAuthKeyString2 OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..48))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which represents a key-string name whose id is 2."
::= { rttMonApplAuthEntry 4 }
rttMonApplAuthKeyString3 OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..48))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which represents a key-string name whose id is 3."
::= { rttMonApplAuthEntry 5 }
rttMonApplAuthKeyString4 OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..48))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which represents a key-string name whose id is 4."
::= { rttMonApplAuthEntry 6 }
rttMonApplAuthKeyString5 OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..48))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which represents a key-string name whose id is 5."
::= { rttMonApplAuthEntry 7 }
rttMonApplAuthStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the Authentication row."
::= { rttMonApplAuthEntry 8 }
rttMonApplLpdGrpStatsReset OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to reset certain objects within the
rttMonLpdGrpStatsTable. When the object is set to value of
an active LPD Group identifier the associated objects will be
reset. The reset objects will be set to a value as specified
in the object's description.
The following objects will not be reset.
- rttMonLpdGrpStatsTargetPE
- rttMonLpdGrpStatsGroupProbeIndex
- rttMonLpdGrpStatsGroupIndex
- rttMonLpdGrpStatsStartTimeIndex."
::= { rttMonAppl 15 }
-- RTT Configuration Definitions
rttMonCtrlAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonCtrlAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Round Trip Time (RTT) monitoring definitions.
The RTT administration control is in multiple tables.
This first table, is used to create a conceptual RTT
control row. The following tables contain objects which
configure scheduling, information gathering, and
notification/trigger generation. All of these tables
will create the same conceptual RTT control row as this
table using this tables' index as their own index.
This table is limited in size by the agent
implementation. The object rttMonApplNumCtrlAdminEntry
will reflect this tables maximum number of entries."
::= { rttMonCtrl 1 }
rttMonCtrlAdminEntry OBJECT-TYPE
SYNTAX RttMonCtrlAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A base list of objects that define a conceptual RTT
control row."
INDEX { rttMonCtrlAdminIndex }
::= { rttMonCtrlAdminTable 1 }
RttMonCtrlAdminEntry ::= SEQUENCE {
rttMonCtrlAdminIndex Integer32,
rttMonCtrlAdminOwner OCTET STRING,
rttMonCtrlAdminTag DisplayString,
rttMonCtrlAdminRttType RttMonRttType,
rttMonCtrlAdminThreshold Integer32,
rttMonCtrlAdminFrequency Integer32,
rttMonCtrlAdminTimeout Integer32,
rttMonCtrlAdminVerifyData TruthValue,
rttMonCtrlAdminStatus RowStatus,
rttMonCtrlAdminNvgen TruthValue,
rttMonCtrlAdminGroupName SnmpAdminString,
rttMonCtrlAdminLongTag SnmpAdminString
}
rttMonCtrlAdminIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies a row in the rttMonCtrlAdminTable.
This is a pseudo-random number, selected by the management
station or auto-generated based on operation started by the
management station,when creating a row via
the rttMonCtrlAdminStatus object. If the pseudo-random
number is already in use an 'inconsistentValue' return code
will be returned when
set operation is attempted."
::= { rttMonCtrlAdminEntry 1 }
rttMonCtrlAdminOwner OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identifies the entity that created this table row."
DEFVAL { "" }
::= { rttMonCtrlAdminEntry 2 }
rttMonCtrlAdminTag OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"A string which is used by a managing application to
identify the RTT target. This string is inserted into trap
notifications, but has no other significance to the
agent.
rttMonCtrlAdminTag object is superseded by
rttMonCtrlAdminLongTag."
DEFVAL { "" }
::= { rttMonCtrlAdminEntry 3 }
rttMonCtrlAdminRttType OBJECT-TYPE
SYNTAX RttMonRttType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of RTT operation to be performed. This value
must be set in the same PDU or before setting any type
specific configuration.
Note: The RTT operation 'lspGroup' cannot be created via this
control row. It will be created automatically by Auto SAA L3
MPLS VPN when rttMplsVpnMonCtrlLpd is 'true'."
DEFVAL { echo }
::= { rttMonCtrlAdminEntry 4 }
rttMonCtrlAdminThreshold OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines an administrative threshold limit.
If the RTT operation time exceeds this limit and if the
conditions specified in rttMonReactAdminThresholdType or
rttMonHistoryAdminFilter are satisfied, a
threshold is generated."
DEFVAL { 5000 }
::= { rttMonCtrlAdminEntry 5 }
rttMonCtrlAdminFrequency OBJECT-TYPE
SYNTAX Integer32 (0..604800)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the duration between initiating each RTT
operation.
This object cannot be set to a value which would be a
shorter duration than rttMonCtrlAdminTimeout.
When the RttMonRttType specifies an operation that is
synchronous in nature, it may happen that the next RTT
operation is blocked by a RTT operation which has not
yet completed. In this case, the value of a counter
(rttMonStatsCollectBusies) in rttMonStatsCaptureTable is
incremented in lieu of initiating a RTT operation, and
the next attempt will occur at the next
rttMonCtrlAdminFrequency expiration.
NOTE: When the rttMonCtrlAdminRttType object is defined
to be 'pathEcho', setting this value to a small
value for your network size may cause an operation
attempt (or multiple attempts) to be started
before the previous operation has finished. In
this situation the rttMonStatsCollectBusies object
will be incremented in lieu of initiating a new
RTT operation, and the next attempt will occur at
the next rttMonCtrlAdminFrequency expiration.
When the rttMonCtrlAdminRttType object is defined
to be 'pathEcho', the suggested value for this object
is greater than rttMonCtrlAdminTimeout times the
maximum number of expected hops to the target.
NOTE: When the rttMonCtrlAdminRttType object is defined
to be 'dhcp', the minimum allowed value for this
object is 10 seconds. This restriction is due to
protocol limitations described in RFC 2131."
DEFVAL { 60 }
::= { rttMonCtrlAdminEntry 6 }
rttMonCtrlAdminTimeout OBJECT-TYPE
SYNTAX Integer32 (0..604800000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the duration to wait for a RTT operation
completion. The value of this object cannot be set to
a value which would specify a duration exceeding
rttMonCtrlAdminFrequency.
For connection oriented protocols, this may cause the
connection to be closed by the probe. Once closed, it
will be assumed that the connection reestablishment
will be performed. To prevent unwanted closure of
connections, be sure to set this value to a realistic
connection timeout."
DEFVAL { 5000 }
::= { rttMonCtrlAdminEntry 7 }
rttMonCtrlAdminVerifyData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to true, the resulting data in each RTT
operation is compared with the expected data. This
includes checking header information (if possible) and
exact packet size. Any mismatch will be recorded in the
rttMonStatsCollectVerifyErrors object.
Some RttMonRttTypes may not support this option. When
a type does not support this option, the agent will
transition this object to false. It is the management
applications responsibility to check for this
transition."
DEFVAL { false }
::= { rttMonCtrlAdminEntry 8 }
rttMonCtrlAdminStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the conceptual RTT control row.
In order for this object to become active, the following
row objects must be defined:
- rttMonCtrlAdminRttType
Additionally:
- for echo, pathEcho based on 'ipIcmpEcho' and dlsw probes
rttMonEchoAdminProtocol and
rttMonEchoAdminTargetAddress;
- for echo, pathEcho based on 'mplsLspPingAppl'
rttMonEchoAdminProtocol, rttMonEchoAdminTargetAddress
and rttMonEchoAdminLSPFECType
- for udpEcho, tcpConnect and jitter probes
rttMonEchoAdminTargetAddress and
rttMonEchoAdminTargetPort
- for http and ftp probe
rttMonEchoAdminURL
- for dns probe
rttMonEchoAdminTargetAddressString
rttMonEchoAdminNameServer
- dhcp probe doesn't require any additional objects
All other objects can assume default values. The
conceptual Rtt control row will be placed into a
'pending' state (via the rttMonCtrlOperState object)
if rttMonScheduleAdminRttStartTime is not specified.
Most conceptual Rtt control row objects cannot be
modified once this conceptual Rtt control row has been
created. The objects that can change are the following:
- Objects in the rttMonReactAdminTable can be modified
as needed without setting this object to
'notInService'.
- Objects in the rttMonScheduleAdminTable can be
modified only when this object has the value of
'notInService'.
- The rttMonCtrlOperState can be modified to control
the state of the probe.
Once this object is in 'active' status, it cannot be
set to 'notInService' while the rttMonCtrlOperState
is in 'active' state. Thus the rttMonCtrlOperState
object must be transitioned first.
This object can be set to 'destroy' from any value
at any time."
::= { rttMonCtrlAdminEntry 9 }
rttMonCtrlAdminNvgen OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to true, this entry will be shown in
'show running' command and can be saved into
Non-volatile memory."
DEFVAL { false }
::= { rttMonCtrlAdminEntry 10 }
rttMonCtrlAdminGroupName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the operation is created through auto measure group
creation, then this string will specify the group name
to which this operation is associated."
DEFVAL { "" }
::= { rttMonCtrlAdminEntry 11 }
rttMonCtrlAdminLongTag OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object provides additional information about the Probe
and is inserted into trap notifications, but has no other
significance to the agent.
Setting this object will overwrite any description already set
by rttMonCtrlAdminTag and vice-versa."
DEFVAL { "" }
::= { rttMonCtrlAdminEntry 12 }
-- Echo Administration Table
rttMonEchoAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonEchoAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains Round Trip Time (RTT) specific
definitions.
This table is controlled via the
rttMonCtrlAdminTable. Entries in this table are
created via the rttMonCtrlAdminStatus object."
::= { rttMonCtrl 2 }
rttMonEchoAdminEntry OBJECT-TYPE
SYNTAX RttMonEchoAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that define specific configuration for
RttMonRttType conceptual Rtt control rows."
INDEX { rttMonCtrlAdminIndex }
::= { rttMonEchoAdminTable 1 }
RttMonEchoAdminEntry ::= SEQUENCE {
rttMonEchoAdminProtocol RttMonProtocol,
rttMonEchoAdminTargetAddress RttMonTargetAddress,
rttMonEchoAdminPktDataRequestSize Integer32,
rttMonEchoAdminPktDataResponseSize Integer32,
rttMonEchoAdminTargetPort Integer32,
rttMonEchoAdminSourceAddress RttMonTargetAddress,
rttMonEchoAdminSourcePort Integer32,
rttMonEchoAdminControlEnable TruthValue,
rttMonEchoAdminTOS Integer32,
rttMonEchoAdminLSREnable TruthValue,
rttMonEchoAdminTargetAddressString DisplayString,
rttMonEchoAdminNameServer RttMonTargetAddress,
rttMonEchoAdminOperation RttMonOperation,
rttMonEchoAdminHTTPVersion DisplayString,
rttMonEchoAdminURL DisplayString,
rttMonEchoAdminCache TruthValue,
rttMonEchoAdminInterval Integer32,
rttMonEchoAdminNumPackets Integer32,
rttMonEchoAdminProxy DisplayString,
rttMonEchoAdminString1 DisplayString,
rttMonEchoAdminString2 DisplayString,
rttMonEchoAdminString3 DisplayString,
rttMonEchoAdminString4 DisplayString,
rttMonEchoAdminString5 DisplayString,
rttMonEchoAdminMode RttMonOperation,
rttMonEchoAdminVrfName OCTET STRING,
rttMonEchoAdminCodecType RttMonCodecType,
rttMonEchoAdminCodecInterval Integer32,
rttMonEchoAdminCodecPayload Integer32,
rttMonEchoAdminCodecNumPackets Integer32,
rttMonEchoAdminICPIFAdvFactor Integer32,
rttMonEchoAdminLSPFECType INTEGER,
rttMonEchoAdminLSPSelector RttMonTargetAddress,
rttMonEchoAdminLSPReplyMode RttMonLSPPingReplyMode,
rttMonEchoAdminLSPTTL Integer32,
rttMonEchoAdminLSPExp Integer32,
rttMonEchoAdminPrecision INTEGER,
rttMonEchoAdminProbePakPriority INTEGER,
rttMonEchoAdminOWNTPSyncTolAbs Integer32,
rttMonEchoAdminOWNTPSyncTolPct Integer32,
rttMonEchoAdminOWNTPSyncTolType INTEGER,
rttMonEchoAdminCalledNumber SnmpAdminString,
rttMonEchoAdminDetectPoint RttMonOperation,
rttMonEchoAdminGKRegistration TruthValue,
rttMonEchoAdminSourceVoicePort DisplayString,
rttMonEchoAdminCallDuration Integer32,
rttMonEchoAdminLSPReplyDscp Integer32,
rttMonEchoAdminLSPNullShim TruthValue,
rttMonEchoAdminTargetMPID CfmMepid,
rttMonEchoAdminTargetDomainName SnmpAdminString,
rttMonEchoAdminTargetVLAN VlanId,
rttMonEchoAdminEthernetCOS QosLayer2Cos,
rttMonEchoAdminLSPVccvID Integer32,
rttMonEchoAdminTargetEVC SnmpAdminString,
rttMonEchoAdminTargetMEPPort TruthValue,
rttMonEchoAdminVideoTrafficProfile SnmpAdminString,
rttMonEchoAdminDscp Dscp,
rttMonEchoAdminReserveDsp INTEGER,
rttMonEchoAdminInputInterface InterfaceIndexOrZero,
rttMonEchoAdminEmulateSourceAddress RttMonTargetAddress,
rttMonEchoAdminEmulateSourcePort Integer32,
rttMonEchoAdminEmulateTargetAddress RttMonTargetAddress,
rttMonEchoAdminEmulateTargetPort Integer32,
rttMonEchoAdminTargetMacAddress MacAddress,
rttMonEchoAdminSourceMacAddress MacAddress,
rttMonEchoAdminSourceMPID CfmMepid,
rttMonEchoAdminEndPointListName SnmpAdminString,
rttMonEchoAdminSSM TruthValue,
rttMonEchoAdminControlRetry Unsigned32,
rttMonEchoAdminControlTimeout Unsigned32,
rttMonEchoAdminIgmpTreeInit Unsigned32,
rttMonEchoAdminEnableBurst TruthValue,
rttMonEchoAdminAggBurstCycles Integer32,
rttMonEchoAdminLossRatioNumFrames Integer32,
rttMonEchoAdminAvailNumFrames Integer32,
rttMonEchoAdminTstampOptimization TruthValue,
rttMonEchoAdminTargetSwitchId Unsigned32,
rttMonEchoAdminProfileId Unsigned32,
rttMonEchoAdminOutputInterface InterfaceIndexOrZero
}
rttMonEchoAdminProtocol OBJECT-TYPE
SYNTAX RttMonProtocol
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the protocol to be used to perform the RTT
operation. The following list defines what protocol
should be used for each probe type:
echo, pathEcho - ipIcmpEcho / mplsLspPingAppl
udpEcho - ipUdpEchoAppl
tcpConnect - ipTcpConn
http - httpAppl
jitter - jitterAppl
dlsw - dlswAppl
dhcp - dhcpAppl
ftp - ftpAppl
mplsLspPing - mplsLspPingAppl
voip - voipAppl
video - videoAppl
fabricPathEcho - fabricPathEchoAppl
When this protocol does not support the type, a 'badValue'
error will be returned."
DEFVAL { notApplicable }
::= { rttMonEchoAdminEntry 1 }
rttMonEchoAdminTargetAddress OBJECT-TYPE
SYNTAX RttMonTargetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which specifies the address of the target."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 2 }
rttMonEchoAdminPktDataRequestSize OBJECT-TYPE
SYNTAX Integer32 (0..16384)
UNITS "octets"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the number of octets to be
placed into the ARR Data portion of the request
message, when using SNA protocols.
For non-ARR protocols' RTT request/responses,
this value represents the native payload size.
REMEMBER: The ARR Header overhead is not included
in this value.
For echo probes the total packet size = (IP header(20) +
ICMP header(8) + 8 (internal timestamps) + request size).
For echo and pathEcho default request size is 28.
For udp probe, default request size is 16 and for jitter
probe it is 32. For dlsw probes default request size is 0.
The minimum request size for echo and pathEcho is 28 bytes,
for udp it is 4 and for jitter it is 16.
For udp and jitter probes the maximum request size is 1500.
For ethernetPing the default request size is 66.
For ethernetJitter the default request size is 51."
DEFVAL { 1 }
::= { rttMonEchoAdminEntry 3 }
rttMonEchoAdminPktDataResponseSize OBJECT-TYPE
SYNTAX Integer32 (0..16384)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the number of octets to be
placed into the ARR Data portion of the response message.
This value is passed to the RTT Echo Server via a
field in the ARR Header.
For non-ARR RTT request/response (i.e. ipIcmpecho)
this value will be set by the agent to match the
size of rttMonEchoAdminPktDataRequestSize, when
native payloads are supported.
REMEMBER: The ARR Header overhead is not included
in this value.
This object is only supported by SNA protocols."
DEFVAL { 0 }
::= { rttMonEchoAdminEntry 4 }
rttMonEchoAdminTargetPort OBJECT-TYPE
SYNTAX Integer32 (0..65536)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the target's port number. This
object is applicable to udpEcho, tcpConnect and jitter probes."
DEFVAL { 1 }
::= { rttMonEchoAdminEntry 5 }
rttMonEchoAdminSourceAddress OBJECT-TYPE
SYNTAX RttMonTargetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which specifies the IP address of the source.
This object is applicable to all probes except dns, dlsw
and sna."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 6 }
rttMonEchoAdminSourcePort OBJECT-TYPE
SYNTAX Integer32 (0..65536)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the source's port number. If this
object is not specified, the application will get a
port allocated by the system. This object is applicable
to all probes except dns, dlsw and sna."
DEFVAL { 1 }
::= { rttMonEchoAdminEntry 7 }
rttMonEchoAdminControlEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If this object is enabled, then the RTR application
will send control messages to a responder, residing on the
target router to respond to the data request packets being
sent by the source router. This object is not applicable to
echo, pathEcho, dns and http probes."
DEFVAL { true }
::= { rttMonEchoAdminEntry 8 }
rttMonEchoAdminTOS OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the type of service octet in an
IP header. This object is not applicable to dhcp, dns,
ethernetPing and ethernetJitter."
REFERENCE
"Refer to the following documents for TOS definition.
RFC791/1349 for IPv4, IPv6,
draft-ietf-diffserv-header-02.txt"
DEFVAL { 0 }
::= { rttMonEchoAdminEntry 9 }
rttMonEchoAdminLSREnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If this object is enabled then it means that the application
calculates response time for a specific path, defined in
rttMonEchoPathAdminEntry. This object is applicable to echo
probe only."
DEFVAL { false }
::= { rttMonEchoAdminEntry 10 }
rttMonEchoAdminTargetAddressString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which specifies the address of the target. This string
can be in IP address format or a hostname. This object
is applicable to dns probe only."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 11 }
rttMonEchoAdminNameServer OBJECT-TYPE
SYNTAX RttMonTargetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which specifies the ip address of the name-server.
This object is applicable to dns probe only."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 12 }
rttMonEchoAdminOperation OBJECT-TYPE
SYNTAX RttMonOperation
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A code that represents the specific type of RTT operation.
This object is applicable to http and ftp probe only."
::= { rttMonEchoAdminEntry 13 }
rttMonEchoAdminHTTPVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (3..10))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which specifies the version number of the HTTP
Server. The syntax for the version string is
<major number>.<minor number> An example would be 1.0,
1.1 etc.,. This object is applicable to http probe only."
DEFVAL { "1.0" }
::= { rttMonEchoAdminEntry 14 }
rttMonEchoAdminURL OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which represents the URL to which a HTTP probe should
communicate with. This object is applicable to http probe only."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 15 }
rttMonEchoAdminCache OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If this object is false then it means that HTTP request should
not download cached pages. This means that the request should
be forwarded to the origin server. This object is applicable
to http probe only."
DEFVAL { true }
::= { rttMonEchoAdminEntry 16 }
rttMonEchoAdminInterval OBJECT-TYPE
SYNTAX Integer32 (0..60000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value represents the inter-packet delay between packets
and is in milliseconds. This value is currently used for
Jitter probe. This object is applicable to jitter probe only."
DEFVAL { 20 }
::= { rttMonEchoAdminEntry 17 }
rttMonEchoAdminNumPackets OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value represents the number of packets that need to be
transmitted. This value is currently used for Jitter probe.
This object is applicable to jitter probe only."
DEFVAL { 10 }
::= { rttMonEchoAdminEntry 18 }
rttMonEchoAdminProxy OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This string represents the proxy server information.
This object is applicable to http probe only."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 19 }
rttMonEchoAdminString1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This string stores the content of HTTP raw request.
If the request cannot fit into String1 then it should
be split and put in Strings 1 through 5.
This string stores the content of the DHCP raw option
data. The raw DHCP option data must be in HEX.
If an odd number of characters are specified, a 0
will be appended to the end of the string. Only
DHCP option 82 (decimal) is allowed.
Here is an example of a valid string:
5208010610005A6F1234
Only rttMonEchoAdminString1 is used for dhcp, Strings
1 through 5 are not used.
This object is applicable to http and dhcp probe
types only."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 20 }
rttMonEchoAdminString2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This string stores the content of HTTP raw request.
rttMonEchoAdminString1-5 are concatenated to
form the HTTP raw request used in the RTT operation.
This object is applicable to http probe only."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 21 }
rttMonEchoAdminString3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This string stores the content of HTTP raw request.
rttMonEchoAdminString1-5 are concatenated to
form the HTTP raw request used in the RTT operation.
This object is applicable to http probe only."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 22 }
rttMonEchoAdminString4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This string stores the content of HTTP raw request.
rttMonEchoAdminString1-5 are concatenated to
form the HTTP raw request used in the RTT operation.
This object is applicable to http probe only."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 23 }
rttMonEchoAdminString5 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This string stores the content of HTTP raw request.
rttMonEchoAdminString1-5 are concatenated to
form the HTTP raw request used in the RTT operation.
This object is applicable to http probe only."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 24 }
rttMonEchoAdminMode OBJECT-TYPE
SYNTAX RttMonOperation
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A code that represents the specific type of RTT operation.
This object is applicable to ftp probe only."
DEFVAL { ftpPassive }
::= { rttMonEchoAdminEntry 25 }
rttMonEchoAdminVrfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field is used to specify the VPN name in
which the RTT operation will be used. For regular RTT
operation this field should not be configured. The agent
will use this field to identify the VPN routing Table for
this operation."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 26 }
rttMonEchoAdminCodecType OBJECT-TYPE
SYNTAX RttMonCodecType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the codec type to be used with jitter probe. This is
applicable only for the jitter probe.
If codec-type is configured the following parameters cannot be
configured.
rttMonEchoAdminPktDataRequestSize
rttMonEchoAdminInterval
rttMonEchoAdminNumPackets"
::= { rttMonEchoAdminEntry 27 }
rttMonEchoAdminCodecInterval OBJECT-TYPE
SYNTAX Integer32 (0..60000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field represents the inter-packet delay between
packets and is in milliseconds. This object is applicable
only to jitter probe which uses codec type."
::= { rttMonEchoAdminEntry 28 }
rttMonEchoAdminCodecPayload OBJECT-TYPE
SYNTAX Integer32 (0..16384)
UNITS "octets"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the number of octets that needs to be
placed into the Data portion of the message. This value is
used only for jitter probe which uses codec type."
::= { rttMonEchoAdminEntry 29 }
rttMonEchoAdminCodecNumPackets OBJECT-TYPE
SYNTAX Integer32 (0..60000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value represents the number of packets that need to be
transmitted. This value is used only for jitter probe which
uses codec type."
::= { rttMonEchoAdminEntry 30 }
rttMonEchoAdminICPIFAdvFactor OBJECT-TYPE
SYNTAX Integer32 (0..20)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The advantage factor is dependant on the type of access and
how the service is to be used.
Conventional Wire-line 0
Mobility within Building 5
Mobility within geographic area 10
Access to hard-to-reach location 20
This will be used while calculating the ICPIF values
This valid only for Jitter while calculating the ICPIF value"
DEFVAL { 0 }
::= { rttMonEchoAdminEntry 31 }
rttMonEchoAdminLSPFECType OBJECT-TYPE
SYNTAX INTEGER {
ldpIpv4Prefix(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the target FEC for the RTT 'echo' and 'pathEcho'
operations based on 'mplsLspPingAppl' RttMonProtocol.
ldpIpv4Prefix - LDP IPv4 prefix."
::= { rttMonEchoAdminEntry 32 }
rttMonEchoAdminLSPSelector OBJECT-TYPE
SYNTAX RttMonTargetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which specifies a valid 127/8 address. This address
is of the form 127.x.y.z.
This address is not used to route the MPLS echo packet to the
destination but is used for load balancing in cases where the
IP payload's destination address is used for load balancing."
DEFVAL { "7F 00 00 01" }
::= { rttMonEchoAdminEntry 33 }
rttMonEchoAdminLSPReplyMode OBJECT-TYPE
SYNTAX RttMonLSPPingReplyMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the reply mode for the LSP Echo
requests."
DEFVAL { replyIpv4Udp }
::= { rttMonEchoAdminEntry 34 }
rttMonEchoAdminLSPTTL OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the TTL setting for MPLS echo request
packets. For ping operation this represents the TTL value to
be set in the echo request packet. For trace operation it
represent the maximum ttl value that can be set in the echo
request packets starting with TTL=1.
For 'echo' based on mplsLspPingAppl the default TTL will be
set to 255, and for 'pathEcho' based on mplsLspPingAppl the
default will be set to 30.
Note: This object cannot be set to the value of 0. The
default value of 0 signifies the default TTL values to be
used for 'echo' and 'pathEcho' based on 'mplsLspPingAppl'."
DEFVAL { 0 }
::= { rttMonEchoAdminEntry 35 }
rttMonEchoAdminLSPExp OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the EXP value that needs to be
put as precedence bit in the MPLS echo request IP header."
DEFVAL { 0 }
::= { rttMonEchoAdminEntry 36 }
rttMonEchoAdminPrecision OBJECT-TYPE
SYNTAX INTEGER {
milliseconds(1),
microseconds(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the accuracy of statistics that
needs to be calculated
milliseconds - The accuracy of stats will be of milliseconds
microseconds - The accuracy of stats will be in microseconds.
This value can be set only for jitter operation"
DEFVAL { milliseconds }
::= { rttMonEchoAdminEntry 37 }
rttMonEchoAdminProbePakPriority OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
high(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the priority that will be assigned
to probe packet. This value can be set only for jitter
operation"
DEFVAL { normal }
::= { rttMonEchoAdminEntry 38 }
rttMonEchoAdminOWNTPSyncTolAbs OBJECT-TYPE
SYNTAX Integer32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the total clock synchronization error
on source and responder that is considered acceptable for
oneway measurement when NTP is used as clock synchronization
mechanism. The total clock synchronization error is sum of
NTP offsets on source and responder. The value specified is
microseconds. This value can be set only for jitter operation
with precision of microsecond."
DEFVAL { 0 }
::= { rttMonEchoAdminEntry 39 }
rttMonEchoAdminOWNTPSyncTolPct OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the total clock synchronization error
on source and responder that is considered acceptable for
oneway measurement when NTP is used as clock synchronization
mechanism. The total clock synchronization error is sum of
NTP offsets on source and responder. The value is expressed
as the percentage of actual oneway latency that is measured.
This value can be set only for jitter operation with precision
of microsecond."
DEFVAL { 0 }
::= { rttMonEchoAdminEntry 40 }
rttMonEchoAdminOWNTPSyncTolType OBJECT-TYPE
SYNTAX INTEGER {
percent(1),
absolute(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies whether the value in specified for oneway
NTP sync tolerance is absolute value or percent value"
DEFVAL { percent }
::= { rttMonEchoAdminEntry 41 }
rttMonEchoAdminCalledNumber OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..24))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This string stores the called number of post dial delay.
This object is applicable to voip post dial delay probe only.
The number will be like the one actualy the user could dial.
It has the number required by the local country dial plan, plus
E.164 number. The maximum length is 24 digits. Only digit (0-9)
is allowed."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 42 }
rttMonEchoAdminDetectPoint OBJECT-TYPE
SYNTAX RttMonOperation
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A code that represents the detect point of post dial delay.
This object is applicable to SAA post dial delay probe only."
DEFVAL { voipDTAlertRinging }
::= { rttMonEchoAdminEntry 43 }
rttMonEchoAdminGKRegistration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A boolean that represents VoIP GK registration delay.
This object is applicable to SAA GK registration delay
probe only."
DEFVAL { false }
::= { rttMonEchoAdminEntry 44 }
rttMonEchoAdminSourceVoicePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which specifies the voice-port on the source gateway.
This object is applicable to RTP probe only."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 45 }
rttMonEchoAdminCallDuration OBJECT-TYPE
SYNTAX Integer32 (1..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Duration of RTP/Video Probe session.
This object is applicable to RTP and Video probe."
DEFVAL { 60 }
::= { rttMonEchoAdminEntry 46 }
rttMonEchoAdminLSPReplyDscp OBJECT-TYPE
SYNTAX Integer32 (0..63 | 255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the DSCP value to be set in the IP header
of the LSP echo reply packet.
The value of this object will be in range of DiffServ codepoint
values between 0 to 63.
Note: This object cannot be set to value of 255. This default
value specifies that DSCP is not set for this row."
DEFVAL { 255 }
::= { rttMonEchoAdminEntry 47 }
rttMonEchoAdminLSPNullShim OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies if the explicit-null label is to be added
to LSP echo requests which are sent while performing RTT
operation."
DEFVAL { false }
::= { rttMonEchoAdminEntry 48 }
rttMonEchoAdminTargetMPID OBJECT-TYPE
SYNTAX CfmMepid
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the destination maintenance point ID.
It is only applicable to ethernetPing and ethernetJitter
operation. It will be set to 0 for other types of
operations."
::= { rttMonEchoAdminEntry 49 }
rttMonEchoAdminTargetDomainName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the name of the domain in which the
destination maintenance point lies. It is only applicable to
ethernetPing and ethernetJitter operation."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 50 }
rttMonEchoAdminTargetVLAN OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the ID of the VLAN in which the
destination maintenance point lies. It is only applicable to
ethernetPing and ethernetJitter operation.
It will be set to 0 for other types of operations."
::= { rttMonEchoAdminEntry 51 }
rttMonEchoAdminEthernetCOS OBJECT-TYPE
SYNTAX QosLayer2Cos (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the class of service in an Ethernet
packet header. It is only applicable to ethernetPing and
ethernetJitter operation."
DEFVAL { 0 }
::= { rttMonEchoAdminEntry 52 }
rttMonEchoAdminLSPVccvID OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies MPLS LSP pseudowire VCCV ID
values between 1 to 2147483647.
Note: This object cannot be set to value of 0. This default
value specifies that VCCV is not set for this row."
DEFVAL { 0 }
::= { rttMonEchoAdminEntry 53 }
rttMonEchoAdminTargetEVC OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..100))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the Ethernet Virtual Connection in
which the destination maintenance point lies. It is only
applicable to ethernetPing and ethernetJitter operation.
It will be set to NULL for other types of operations."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 54 }
rttMonEchoAdminTargetMEPPort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies that Port Level CFM testing towards an
Outward/Down MEP will be used. It is only applicable to
ethernetPing and ethernetJitter operation.
It will be set to NULL for other types of operations."
DEFVAL { false }
::= { rttMonEchoAdminEntry 55 }
rttMonEchoAdminVideoTrafficProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which represents the profile name to which a video
probe should use. This object is applicable to video probe
only."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 56 }
rttMonEchoAdminDscp OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the Differentiated Service Code Point
(DSCP) QoS marking in the generated synthetic packets.
Value - DiffServ Class
0 - BE (default)
10 - AF11
12 - AF12
14 - AF13
18 - AF21
20 - AF22
22 - AF23
26 - AF31
28 - AF32
30 - AF33
34 - AF41
36 - AF42
38 - AF43
8 - CS1
16 - CS2
24 - CS3
32 - CS4
40 - CS5
48 - CS6
56 - CS7
46 - EF"
REFERENCE "RFC 2474, RFC 2780"
DEFVAL { 0 }
::= { rttMonEchoAdminEntry 57 }
rttMonEchoAdminReserveDsp OBJECT-TYPE
SYNTAX INTEGER {
be(1), -- best effort
gs(2), -- guaranteed service
na(3) -- not applicable
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the video traffic generation source.
be : best effort using DSP but without reservation
gs : guaranteed service using DSP with reservation
na : not applicable for not using DSP"
DEFVAL { na }
::= { rttMonEchoAdminEntry 58 }
rttMonEchoAdminInputInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the network input interface on the
sender router where the synthetic packets are received from the
emulated endpoint source. This is used for path congruence with
correct feature processing at the sender router.
The user can get the InterfaceIndex number from ifIndex object
by looking up in ifTable. In fact, it should be useful to first
get the entry by the augmented table ifXTable which has ifName
object which matches the interface name used on the router or
switch equipment console."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 59 }
rttMonEchoAdminEmulateSourceAddress OBJECT-TYPE
SYNTAX RttMonTargetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the IP address of the emulated source
from which the synthetic packets would be generated. If this
object is not specified, the emulated source IP address will by
default be the same as rttMonEchoAdminSourceAddress. This object
is applicable to video probes."
::= { rttMonEchoAdminEntry 60 }
rttMonEchoAdminEmulateSourcePort OBJECT-TYPE
SYNTAX Integer32 (0..65536)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the port number of the emulated source
from which the synthetic packets would be generated. If this
object is not specified, the emulated source port number will by
default be the same as rttMonEchoAdminSourcePort. This object is
applicable to video probes."
::= { rttMonEchoAdminEntry 61 }
rttMonEchoAdminEmulateTargetAddress OBJECT-TYPE
SYNTAX RttMonTargetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the IP address of the emulated target by
which the synthetic packets would be received. If this object is
not specified, the emulated target IP address will by default be
the same as rttMonEchoAdminTargetAddress. This object is
applicable to video probes."
::= { rttMonEchoAdminEntry 62 }
rttMonEchoAdminEmulateTargetPort OBJECT-TYPE
SYNTAX Integer32 (0..65536)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the port number of the emulated target
by which the synthetic packets would be received. If this object
is not specified, the emulated target port number will by
default be the same as rttMonEchoAdminTargetPort. This object is
applicable to video probes."
::= { rttMonEchoAdminEntry 63 }
rttMonEchoAdminTargetMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the MAC address of the target device.
This object is only applicable for Y.1731 operations.
rttMonEchoAdminTargetMacAddress and rttMonEchoAdminTargetMPID
may not be used in conjunction."
::= { rttMonEchoAdminEntry 64 }
rttMonEchoAdminSourceMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the MAC address of the source device.
This object is only applicable for Y.1731 operations.
rttMonEchoAdminSourceMacAddress and rttMonEchoAdminSourceMPID
may not be used in conjunction."
::= { rttMonEchoAdminEntry 65 }
rttMonEchoAdminSourceMPID OBJECT-TYPE
SYNTAX CfmMepid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the source maintenance point ID. It is
only applicable to Y.1731 operation. It will be set to zero for
other types of opearations. rttMonEchoAdminSourceMPID and
rttMonEchoAdminSourceMacAddress may not be used in
conjunction."
::= { rttMonEchoAdminEntry 66 }
rttMonEchoAdminEndPointListName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the name of endpoint list which a probe
uses to generate operations."
DEFVAL { "" }
::= { rttMonEchoAdminEntry 67 }
rttMonEchoAdminSSM OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies if Source Specific Multicast is to be
added. This object is applicable to multicast probe only."
DEFVAL { false }
::= { rttMonEchoAdminEntry 68 }
rttMonEchoAdminControlRetry OBJECT-TYPE
SYNTAX Unsigned32 (1..5)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the maximum number of retries for control
message."
DEFVAL { 3 }
::= { rttMonEchoAdminEntry 69 }
rttMonEchoAdminControlTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..10000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the wait duration before control message
timeout."
DEFVAL { 5000 }
::= { rttMonEchoAdminEntry 70 }
rttMonEchoAdminIgmpTreeInit OBJECT-TYPE
SYNTAX Unsigned32 (0..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies number of packets to be sent for
multicast tree setup. This object is applicable to multicast
probe only."
DEFVAL { 0 }
::= { rttMonEchoAdminEntry 71 }
rttMonEchoAdminEnableBurst OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates that packets will be sent in burst."
DEFVAL { false }
::= { rttMonEchoAdminEntry 72 }
rttMonEchoAdminAggBurstCycles OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of burst cycles to be sent
during the aggregate interval. This value is currently used
for Y1731 SLM(Synthetic Loss Measurment) probe.
This object is applicable to Y1731 SLM probe only."
DEFVAL { 0 }
::= { rttMonEchoAdminEntry 73 }
rttMonEchoAdminLossRatioNumFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of frames over which to
calculate the frame loss ratio. This object is applicable
to Y1731 SLM probe only."
DEFVAL { 10 }
::= { rttMonEchoAdminEntry 74 }
rttMonEchoAdminAvailNumFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of frames over which to
calculate the availability. This object is applicable to
Y1731 SLM probe only."
DEFVAL { 10 }
::= { rttMonEchoAdminEntry 75 }
rttMonEchoAdminTstampOptimization OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies whether timestamp optimization is
enabled.
When the value is 'true' then timestamp optimization is
enabled. The probe will utilize lower layer (Hardware/Packet
Processor) timestamping values to improve accuracy of
statistics.
This value can be set only for udp jitter operation with
precision of microsecond."
DEFVAL { false }
::= { rttMonEchoAdminEntry 76 }
rttMonEchoAdminTargetSwitchId OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the destination Switch Id that
needed to send one TRILL/FB OAM Loopback request. This
object is applicable to Fabric Path Echo probe only.
Value 0 means not applicable."
DEFVAL { 0 }
::= { rttMonEchoAdminEntry 77 }
rttMonEchoAdminProfileId OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..1023)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the destination Profile Id that
needed to send one TRILL/FB OAM Loopback request. This
object is applicable to Fabric Path Echo probe only.
Value 0 means not applicable."
DEFVAL { 0 }
::= { rttMonEchoAdminEntry 78 }
rttMonEchoAdminOutputInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the network interface on the
sender router where the packets are transmitted from the
emulated endpoint source.
The user can get the InterfaceIndex number from ifIndex object
by looking up in ifTable. In fact, it should be useful to first
get the entry by the augmented table ifXTable which has ifName
object which matches the interface name used on the router or
switch equipment console."
DEFVAL { 0 }
::= { rttMonEchoAdminEntry 79 }
-- FileIO Administration TABLE
rttMonFileIOAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonFileIOAdminEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A table of Round Trip Time (RTT) monitoring 'fileIO'
specific definitions.
When the RttMonRttType is not 'fileIO' this table is
not valid.
This table is controlled via the
rttMonCtrlAdminTable. Entries in this table are
created via the rttMonCtrlAdminStatus object."
::= { rttMonCtrl 3 }
rttMonFileIOAdminEntry OBJECT-TYPE
SYNTAX RttMonFileIOAdminEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A list of objects that define specific configuration for
'fileIO' RttMonRttType conceptual Rtt control rows."
INDEX { rttMonCtrlAdminIndex }
::= { rttMonFileIOAdminTable 1 }
RttMonFileIOAdminEntry ::= SEQUENCE {
rttMonFileIOAdminFilePath DisplayString,
rttMonFileIOAdminSize INTEGER,
rttMonFileIOAdminAction INTEGER
}
rttMonFileIOAdminFilePath OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The fully qualified file path that will be the target
of the RTT operation.
This value must match one of the rttMonApplPreConfigedName
entries."
DEFVAL { "" }
::= { rttMonFileIOAdminEntry 1 }
rttMonFileIOAdminSize OBJECT-TYPE
SYNTAX INTEGER {
n256(1),
n1k(2),
n64k(3),
n128k(4),
n256k(5)
}
UNITS "bytes"
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The size of the file to write/read from the File
Server."
DEFVAL { n256 }
::= { rttMonFileIOAdminEntry 2 }
rttMonFileIOAdminAction OBJECT-TYPE
SYNTAX INTEGER {
write(1),
read(2),
writeRead(3)
}
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The File I/O action to be performed."
DEFVAL { read }
::= { rttMonFileIOAdminEntry 3 }
-- Script Administration Table
rttMonScriptAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonScriptAdminEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A table of Round Trip Time (RTT) monitoring 'script'
specific definitions.
When the RttMonRttType is not 'script' this table is
not valid.
This table is controlled via the
rttMonCtrlAdminTable. Entries in this table are
created via the rttMonCtrlAdminStatus object."
::= { rttMonCtrl 4 }
rttMonScriptAdminEntry OBJECT-TYPE
SYNTAX RttMonScriptAdminEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A list of objects that define specific configuration for
'script' RttMonRttType conceptual Rtt control rows."
INDEX { rttMonCtrlAdminIndex }
::= { rttMonScriptAdminTable 1 }
RttMonScriptAdminEntry ::= SEQUENCE {
rttMonScriptAdminName DisplayString,
rttMonScriptAdminCmdLineParams DisplayString
}
rttMonScriptAdminName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"This will be the Name of the Script that will be used to
generate RTT operations.
This object must match one of the
rttMonApplPreConfigedName entries."
DEFVAL { "" }
::= { rttMonScriptAdminEntry 1 }
rttMonScriptAdminCmdLineParams OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"This will be the actual command line parameters
passed to the rttMonScriptAdminName when being
executed."
DEFVAL { "" }
::= { rttMonScriptAdminEntry 2 }
-- Schedule Administration Table
rttMonScheduleAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonScheduleAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Round Trip Time (RTT) monitoring scheduling
specific definitions.
This table is controlled via the
rttMonCtrlAdminTable. Entries in this table are
created via the rttMonCtrlAdminStatus object."
::= { rttMonCtrl 5 }
rttMonScheduleAdminEntry OBJECT-TYPE
SYNTAX RttMonScheduleAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that define specific configuration for
the scheduling of RTT operations."
AUGMENTS { rttMonCtrlAdminEntry }
::= { rttMonScheduleAdminTable 1 }
RttMonScheduleAdminEntry ::= SEQUENCE {
rttMonScheduleAdminRttLife Integer32,
rttMonScheduleAdminRttStartTime TimeTicks,
rttMonScheduleAdminConceptRowAgeout Integer32,
rttMonScheduleAdminRttRecurring TruthValue,
rttMonScheduleAdminConceptRowAgeoutV2 Integer32,
rttMonScheduleAdminStartType RttMonScheduleStartType,
rttMonScheduleAdminStartDelay Integer32
}
rttMonScheduleAdminRttLife OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object value will be placed into the
rttMonCtrlOperRttLife object when the rttMonCtrlOperState
object transitions to 'active' or 'pending'.
The value 2147483647 has a special meaning. When
this object is set to 2147483647, the
rttMonCtrlOperRttLife object will not decrement.
And thus the life time will never end."
DEFVAL { 3600 }
::= { rttMonScheduleAdminEntry 1 }
rttMonScheduleAdminRttStartTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the time when this conceptional row will
activate.
This is the value of MIB-II's sysUpTime in the future.
When sysUpTime equals this value this object will
cause the activation of a conceptual Rtt row.
When an agent has the capability to determine date and
time, the agent should store this object as DateAndTime.
This allows the agent to completely reset (restart) and
still be able to start conceptual Rtt rows at the
intended time. If the agent cannot keep date and time
and the agent resets, all entries should take on one of
the special value defined below.
The first special value allows this conceptual Rtt
control row to immediately transition the
rttMonCtrlOperState object into 'active' state when the
rttMonCtrlAdminStatus object transitions to active.
This special value is defined to be a value of this
object that, when initially set, is 1.
The second special value allows this conceptual Rtt
control row to immediately transition the
rttMonCtrlOperState object into 'pending' state when
the rttMonCtrlAdminStatus object transitions to active.
Also, when the rttMonCtrlOperRttLife counts down to zero
(and not when set to zero), this special value causes
this conceptual Rtt control row to retransition the
rttMonCtrlOperState object into 'pending' state. This
special value is defined to be a value of this object
that, when initially set, is smaller than the current
sysUpTime. (With the exception of one, as defined in
the previous paragraph)
If rttMonScheduleAdminStartType is specified with this
object then rttMonScheduleAdminRttStartTime
is ignored and probe start time is configured based on
rttMonScheduleAdminStartType."
DEFVAL { 0 }
::= { rttMonScheduleAdminEntry 2 }
rttMonScheduleAdminConceptRowAgeout OBJECT-TYPE
SYNTAX Integer32 (0..2073600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The amount of time this conceptual Rtt control row will
exist when not in an 'active' rttMonCtrlOperState.
When this conceptual Rtt control row enters an 'active'
state, this timer will be reset and suspended. When
this conceptual RTT control row enters a state other
than 'active', the timer will be restarted.
NOTE: When a conceptual Rtt control row ages out, the
agent needs to remove the associated entries in
the rttMonReactTriggerAdminTable and
rttMonReactTriggerOperTable.
When this value is set to zero, this entry will
never be aged out.
rttMonScheduleAdminConceptRowAgeout object is superseded by
rttMonScheduleAdminConceptRowAgeoutV2."
DEFVAL { 3600 }
::= { rttMonScheduleAdminEntry 3 }
rttMonScheduleAdminRttRecurring OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to true, this entry will be scheduled to
run automatically for the specified duration equal
to the life configured, at the same time daily.
This value cannot be set to true
(a) if rttMonScheduleAdminRttLife object has value greater or
equal to 86400 seconds.
(b) if sum of values of rttMonScheduleAdminRttLife and
rttMonScheduleAdminConceptRowAgeout is less or equal to
86400 seconds."
DEFVAL { false }
::= { rttMonScheduleAdminEntry 4 }
rttMonScheduleAdminConceptRowAgeoutV2 OBJECT-TYPE
SYNTAX Integer32 (0..2073600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The amount of time this conceptual Rtt control row will
exist when not in an 'active' rttMonCtrlOperState.
When this conceptual Rtt control row enters an 'active'
state, this timer will be reset and suspended. When
this conceptual RTT control row enters a state other
than 'active', the timer will be restarted.
NOTE: It is the same as rttMonScheduleAdminConceptRowAgeout
except DEFVAL is 0 to be consistent with CLI ageout
default.
When this value is set to zero, this entry will
never be aged out."
DEFVAL { 0 }
::= { rttMonScheduleAdminEntry 5 }
rttMonScheduleAdminStartType OBJECT-TYPE
SYNTAX RttMonScheduleStartType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the start-time option to be used for
scheduling the start time of RTT operation.
The following list defines the start-time options
that can be configured for the probe:
pending(1) pending state.
now(2) schedule to immediately start the
probe.
random(3) schedule start time of probe at random
time over a range.
after(4) schedule start time of probe after a
certain amount of time from now.
specific(5) schedule start time of probe at a given
specific time interval"
DEFVAL { pending }
::= { rttMonScheduleAdminEntry 6 }
rttMonScheduleAdminStartDelay OBJECT-TYPE
SYNTAX Integer32 (500..10000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the start time delay range in
milliseconds.
The value of this object is only effective with
rttMonScheduleAdminStartType value.
For rttMonScheduleAdminStartType with random option,
a random time is generated with in provided start delay
range and added to current time to generate the random
start time of the probe."
DEFVAL { 500 }
::= { rttMonScheduleAdminEntry 7 }
-- Reaction Administration Table
rttMonReactAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonReactAdminEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A table of Round Trip Time (RTT) monitoring Notification
and Trigger definitions.
All Notification/Reactions are applied to all RTT
End-to-End operations. Thus, they do not apply to hops
along a path to the target, when RttMonRttType is
'pathEcho'.
The format and content of SNA NMVT's are not defined
within this module.
It can be noted, however, that there are Alert NMVT's,
and traps which are sent when an abnormal
condition occurs, i.e. when one of
rttMonCtrlOperConnectionLostOccurred,
rttMonCtrlOperTimeoutOccurred or
rttMonCtrlOperOverThresholdOccurred are changed to true,
and Resolution NMVT's, and Resolution traps which are
sent when that condition clears, i.e. when one of
rttMonCtrlOperConnectionLostOccurred,
rttMonCtrlOperTimeoutOccurred or
rttMonCtrlOperOverThresholdOccurred is changed back to
false.
When rttMonReactAdminActionType is set to one of the
following:
- triggerOnly
- trapAndTrigger
- nmvtAndTrigger
- trapNmvtAndTrigger
The corresponding rows in the
rttMonReactTriggerAdminTable defined via the
rttMonCtrlAdminIndex will become active.
This table augments the rttMonCtrlAdminTable.
rttMonReactAdminTable object is superseded by rttMonReactTable."
::= { rttMonCtrl 6 }
rttMonReactAdminEntry OBJECT-TYPE
SYNTAX RttMonReactAdminEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A list of objects that define RTT reaction operations.
rttMonReactAdminEntry object is superseded by rttMonReactEntry."
AUGMENTS { rttMonCtrlAdminEntry }
::= { rttMonReactAdminTable 1 }
RttMonReactAdminEntry ::= SEQUENCE {
rttMonReactAdminConnectionEnable TruthValue,
rttMonReactAdminTimeoutEnable TruthValue,
rttMonReactAdminThresholdType INTEGER,
rttMonReactAdminThresholdFalling Integer32,
rttMonReactAdminThresholdCount Integer32,
rttMonReactAdminThresholdCount2 Integer32,
rttMonReactAdminActionType INTEGER,
rttMonReactAdminVerifyErrorEnable TruthValue
}
rttMonReactAdminConnectionEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"If true, a reaction is generated when a RTT
operation to a rttMonEchoAdminTargetAddress
(echo type) causes
rttMonCtrlOperConnectionLostOccurred to change its
value. Thus connections to intermediate hops will
not cause this value to change.
rttMonReactAdminConnectionEnable object is superseded by
rttMonReactVar."
DEFVAL { false }
::= { rttMonReactAdminEntry 1 }
rttMonReactAdminTimeoutEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"If true, a reaction is generated when a RTT
operation causes rttMonCtrlOperTimeoutOccurred
to change its value.
When the RttMonRttType is 'pathEcho' timeouts to
intermediate hops will not cause
rttMonCtrlOperTimeoutOccurred to change its value.
rttMonReactAdminTimeoutEnable object is superseded by
rttMonReactVar."
DEFVAL { false }
::= { rttMonReactAdminEntry 2 }
rttMonReactAdminThresholdType OBJECT-TYPE
SYNTAX INTEGER {
never(1),
immediate(2),
consecutive(3),
xOfy(4),
average(5)
}
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"This object specifies the conditions under which
rttMonCtrlOperOverThresholdOccurred is changed:
NOTE: When the RttMonRttType is 'pathEcho' this
objects' value and all associated
object values are only valid when RTT
'echo' operations are to the
rttMonEchoAdminTargetAddress object address. Thus
'pathEcho' operations to intermediate
hops will not cause this object to change.
never - rttMonCtrlOperOverThresholdOccurred is
never set
immediate - rttMonCtrlOperOverThresholdOccurred is set
to true when an operation completion time
exceeds rttMonCtrlAdminThreshold;
conversely
rttMonCtrlOperOverThresholdOccurred is set
to false when an operation completion time
falls below
rttMonReactAdminThresholdFalling
consecutive - rttMonCtrlOperOverThresholdOccurred is set
to true when an operation completion time
exceeds rttMonCtrlAdminThreshold on
rttMonReactAdminThresholdCount consecutive
RTT operations; conversely,
rttMonCtrlOperOverThresholdOccurred is set
to false when an operation completion time
falls under the
rttMonReactAdminThresholdFalling
for the same number of consecutive
operations
xOfy - rttMonCtrlOperOverThresholdOccurred is set
to true when x (as specified by
rttMonReactAdminThresholdCount) out of the
last y (as specified by
rttMonReactAdminThresholdCount2)
operation completion time exceeds
rttMonCtrlAdminThreshold;
conversely, it is set to false when x,
out of the last y operation completion
time fall below
rttMonReactAdminThresholdFalling
NOTE: When x > y, the probe will never
generate a reaction.
average - rttMonCtrlOperOverThresholdOccurred is set
to true when the running average of the
previous rttMonReactAdminThresholdCount
operation completion times exceed
rttMonCtrlAdminThreshold; conversely, it
is set to false when the running average
falls below the
rttMonReactAdminThresholdFalling
If this value is changed by a management station,
rttMonCtrlOperOverThresholdOccurred is set to false, but
no reaction is generated if the prior value of
rttMonCtrlOperOverThresholdOccurred was true.
rttMonReactAdminThresholdType object is superseded by
rttMonReactThresholdType."
DEFVAL { never }
::= { rttMonReactAdminEntry 3 }
rttMonReactAdminThresholdFalling OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"This object defines a threshold limit. If the RTT
operation time falls below this limit and if the conditions
specified in rttMonReactAdminThresholdType are satisfied, an
threshold is generated.
rttMonReactAdminThresholdFalling object is superseded by
rttMonReactThresholdFalling."
DEFVAL { 3000 }
::= { rttMonReactAdminEntry 4 }
rttMonReactAdminThresholdCount OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"This object defines the 'x' value of the xOfy condition
specified in rttMonReactAdminThresholdType.
rttMonReactAdminThresholdCount object is superseded by
rttMonReactThresholdCountX."
DEFVAL { 5 }
::= { rttMonReactAdminEntry 5 }
rttMonReactAdminThresholdCount2 OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"This object defines the 'y' value of the xOfy condition
specified in rttMonReactAdminThresholdType.
rttMonReactAdminThresholdCount2 object is superseded by
rttMonReactThresholdCountyY."
DEFVAL { 5 }
::= { rttMonReactAdminEntry 6 }
rttMonReactAdminActionType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
trapOnly(2),
nmvtOnly(3),
triggerOnly(4),
trapAndNmvt(5),
trapAndTrigger(6),
nmvtAndTrigger(7),
trapNmvtAndTrigger(8)
}
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Specifies what type(s), if any, of reaction(s) to
generate if an operation violates one of the watched
conditions:
none - no reaction is generated
trapOnly - a trap is generated
nmvtOnly - an SNA NMVT is generated
triggerOnly - all trigger actions defined for this
entry are initiated
trapAndNmvt - both a trap and an SNA NMVT are
generated
trapAndTrigger - both a trap and all trigger actions
are initiated
nmvtAndTrigger - both a NMVT and all trigger actions
are initiated
trapNmvtAndTrigger - a NMVT, trap, and all trigger actions
are initiated
A trigger action is defined via the
rttMonReactTriggerAdminTable.
rttMonReactAdminActionType object is superseded by
rttMonReactActionType."
DEFVAL { none }
::= { rttMonReactAdminEntry 7 }
rttMonReactAdminVerifyErrorEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"If true, a reaction is generated when a RTT
operation causes rttMonCtrlOperVerifyErrorOccurred
to change its value.
rttMonReactAdminVerifyErrorEnable object is superseded by
rttMonReactVar."
DEFVAL { false }
::= { rttMonReactAdminEntry 8 }
-- Statistics Administration Table
rttMonStatisticsAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonStatisticsAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Round Trip Time (RTT) monitoring statistics
definitions.
The definitions in this table control what and how many
entries will be placed into the rttMonStatsCaptureTable.
The statistics capture table is a rollover table. When
the rttMonStatisticsAdminNumHourGroups index value
exceeds its value defined in this table, the oldest
corresponding group will be deleted and will be replaced
with the new group. All other indices will only fill to
there maximum size.
NOTE: The maximum size of this table is defined to be
the product of the rttMonCtrlAdminIndex times
rttMonStatisticsAdminNumHourGroups times
rttMonStatisticsAdminNumPaths times
rttMonStatisticsAdminNumHops times
rttMonStatisticsAdminNumDistBuckets.
NOTE WELL: Each of the 'Num' objects values in this
have a special behavior. When one of the
objects is set to a value larger than the
Rtt application can support the set will
succeed, but the resultant value will
be set to the applications maximum value.
The setting management station must reread
this object to verify the actual value.
This table augments the rttMonCtrlAdminTable."
::= { rttMonCtrl 7 }
rttMonStatisticsAdminEntry OBJECT-TYPE
SYNTAX RttMonStatisticsAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that define RTT statistics
capture operations."
AUGMENTS { rttMonCtrlAdminEntry }
::= { rttMonStatisticsAdminTable 1 }
RttMonStatisticsAdminEntry ::= SEQUENCE {
rttMonStatisticsAdminNumHourGroups Integer32,
rttMonStatisticsAdminNumPaths Integer32,
rttMonStatisticsAdminNumHops Integer32,
rttMonStatisticsAdminNumDistBuckets Integer32,
rttMonStatisticsAdminDistInterval Integer32
}
rttMonStatisticsAdminNumHourGroups OBJECT-TYPE
SYNTAX Integer32 (0..25)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of groups of paths to record.
Specifically this is the number of hourly groups
to keep before rolling over.
The value of one is not advisable because the
group will close and immediately be deleted before
the network management station will have the
opportunity to retrieve the statistics.
The value used in the rttMonStatsCaptureTable to
uniquely identify this group is the
rttMonStatsCaptureStartTimeIndex.
HTTP and Jitter probes store only two hours of data.
When this object is set to the value of zero all
rttMonStatsCaptureTable data capturing will be shut off."
DEFVAL { 2 }
::= { rttMonStatisticsAdminEntry 1 }
rttMonStatisticsAdminNumPaths OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When RttMonRttType is 'pathEcho' this is the maximum
number of statistics paths to record per hourly group.
This value directly represents the path to a target.
For all other RttMonRttTypes this value will be
forced to one by the agent.
NOTE: For 'pathEcho' a source to target path will be
created to to hold all errors that occur when a
specific path or connection has not be found/setup.
Thus, it is advised to set this value greater
than one.
Since this index does not rollover, only the first
rttMonStatisticsAdminNumPaths will be kept."
DEFVAL { 5 }
::= { rttMonStatisticsAdminEntry 2 }
rttMonStatisticsAdminNumHops OBJECT-TYPE
SYNTAX Integer32 (1..30)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When RttMonRttType is 'pathEcho' this is the maximum
number of statistics hops to record per path group.
This value directly represents the number of hops along
a path to a target, thus we can only support 30 hops.
For all other RttMonRttTypes this value will be
forced to one by the agent.
Since this index does not rollover, only the first
rttMonStatisticsAdminNumHops will be kept. This object
is applicable to pathEcho probes only."
DEFVAL { 16 }
::= { rttMonStatisticsAdminEntry 3 }
rttMonStatisticsAdminNumDistBuckets OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of statistical distribution
Buckets to accumulate.
Since this index does not rollover, only the first
rttMonStatisticsAdminNumDistBuckets will be kept.
The last rttMonStatisticsAdminNumDistBucket will
contain all entries from its distribution interval
start point to infinity. This object is not applicable
to http and jitter probes."
DEFVAL { 1 }
::= { rttMonStatisticsAdminEntry 4 }
rttMonStatisticsAdminDistInterval OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The statistical distribution buckets interval.
Distribution Bucket Example:
rttMonStatisticsAdminNumDistBuckets = 5 buckets
rttMonStatisticsAdminDistInterval = 10 milliseconds
| Bucket 1 | Bucket 2 | Bucket 3 | Bucket 4 | Bucket 5 |
| 0-9 ms | 10-19 ms | 20-29 ms | 30-39 ms | 40-Inf ms |
Odd Example:
rttMonStatisticsAdminNumDistBuckets = 1 buckets
rttMonStatisticsAdminDistInterval = 10 milliseconds
| Bucket 1 |
| 0-Inf ms |
Thus, this odd example shows that the value of
rttMonStatisticsAdminDistInterval does not apply when
rttMonStatisticsAdminNumDistBuckets is one.
This object is not applicable to http and jitter probes."
DEFVAL { 20 }
::= { rttMonStatisticsAdminEntry 5 }
-- History Administration Table
rttMonHistoryAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonHistoryAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Round Trip Time (RTT) monitoring history
definitions.
The definitions in this table control what and how many
entries will be placed into the
rttMonHistoryCollectionTable.
The history collection table is a rollover table. When
the rttMonHistoryAdminNumLives index value exceeds its
value defined in this table, the oldest corresponding
'lives' group will be deleted and will be replaced with
the new 'lives' group. All other indices will only fill
to their maximum size.
NOTE: The maximum size of this table is defined to be
the product of the rttMonCtrlAdminIndex times
rttMonHistoryAdminNumLives times
rttMonHistoryAdminNumBuckets times
rttMonHistoryAdminNumSamples.
NOTE WELL: Each of the 'Num' objects values in this
have a special behavior. When one of the
objects is set to a value larger than the
Rtt application can support the set will
succeed, but the resultant value will
be set to the applications maximum value.
The setting management station must reread
this object to verify the actual value.
NOTE: this table is not applicable to http and jitter
probes"
::= { rttMonCtrl 8 }
rttMonHistoryAdminEntry OBJECT-TYPE
SYNTAX RttMonHistoryAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that define RTT history collection
operations."
AUGMENTS { rttMonCtrlAdminEntry }
::= { rttMonHistoryAdminTable 1 }
RttMonHistoryAdminEntry ::= SEQUENCE {
rttMonHistoryAdminNumLives Integer32,
rttMonHistoryAdminNumBuckets Integer32,
rttMonHistoryAdminNumSamples Integer32,
rttMonHistoryAdminFilter INTEGER
}
rttMonHistoryAdminNumLives OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of history lives to record. A life
is defined by the countdown (or transition) to zero
by the rttMonCtrlOperRttLife object. A new life is
created when the same conceptual RTT control row is
restarted via the transition of the
rttMonCtrlOperRttLife object and its subsequent
countdown.
The value of zero will shut off all
rttMonHistoryAdminTable data collection."
DEFVAL { 0 }
::= { rttMonHistoryAdminEntry 1 }
rttMonHistoryAdminNumBuckets OBJECT-TYPE
SYNTAX Integer32 (1..60)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of history buckets to record. When
the RttMonRttType is 'pathEcho' this value directly
represents a path to a target. For all other
RttMonRttTypes this value should be set to the number
of operations to keep per lifetime.
After rttMonHistoryAdminNumBuckets are filled, the
and the oldest entries are deleted and the most recent
rttMonHistoryAdminNumBuckets buckets are retained."
DEFVAL { 15 }
::= { rttMonHistoryAdminEntry 2 }
rttMonHistoryAdminNumSamples OBJECT-TYPE
SYNTAX Integer32 (1..30)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of history samples to record per
bucket. When the RttMonRttType is 'pathEcho' this
value directly represents the number of hops along a
path to a target, thus we can only support 30 hops.
For all other RttMonRttTypes this value will be
forced to one by the agent."
DEFVAL { 16 }
::= { rttMonHistoryAdminEntry 3 }
rttMonHistoryAdminFilter OBJECT-TYPE
SYNTAX INTEGER {
none(1),
all(2),
overThreshold(3),
failures(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines a filter for adding RTT results to the history
buffer:
none - no history is recorded
all - the results of all completion times
and failed completions are recorded
overThreshold - the results of completion times
over rttMonCtrlAdminThreshold are
recorded.
failures - the results of failed operations (only)
are recorded."
DEFVAL { none }
::= { rttMonHistoryAdminEntry 4 }
-- Overall Operational values
rttMonCtrlOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonCtrlOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of which contains the Operational values for the
probe, and the conceptual RTT control row.
This table augments the rttMonCtrlAdminTable."
::= { rttMonCtrl 9 }
rttMonCtrlOperEntry OBJECT-TYPE
SYNTAX RttMonCtrlOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that describe the current state
of probe, and the conceptual RTT control row."
AUGMENTS { rttMonCtrlAdminEntry }
::= { rttMonCtrlOperTable 1 }
RttMonCtrlOperEntry ::= SEQUENCE {
rttMonCtrlOperModificationTime TimeStamp,
rttMonCtrlOperDiagText DisplayString,
rttMonCtrlOperResetTime TimeStamp,
rttMonCtrlOperOctetsInUse Gauge32,
rttMonCtrlOperConnectionLostOccurred TruthValue,
rttMonCtrlOperTimeoutOccurred TruthValue,
rttMonCtrlOperOverThresholdOccurred TruthValue,
rttMonCtrlOperNumRtts Integer32,
rttMonCtrlOperRttLife Integer32,
rttMonCtrlOperState INTEGER,
rttMonCtrlOperVerifyErrorOccurred TruthValue
}
rttMonCtrlOperModificationTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is updated whenever an object in
the conceptual RTT control row is changed or
updated."
::= { rttMonCtrlOperEntry 1 }
rttMonCtrlOperDiagText OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..51))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string which can be used as an aid in tracing problems.
The content of this field will depend on the type of
target (rttMonEchoAdminProtocol).
When rttMonEchoAdminProtocol is one of snaLU0EchoAppl, or
snaLU2EchoAppl this object contains the name of the
Logical Unit (LU) being used for this RTT session (from
the HOST's point of view), once the session has been
established; this can then be used to correlate this
name to the connection information stored in the
Mainframe Host.
When rttMonEchoAdminProtocol is snaLU62EchoAppl, this
object contains the Logical Unit (LU) name being used for
this RTT session, once the session has been established.
This name can be used by the management application to
correlate this objects value to the connection
information stored at this SNMP Agent via the APPC or
APPN mib.
When rttMonEchoAdminProtocol is not one of the
previously mentioned values, this value will be null.
It is primarily intended that this object contains
information which has significance to a human operator."
DEFVAL { "" }
::= { rttMonCtrlOperEntry 2 }
rttMonCtrlOperResetTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is set when the rttMonCtrlOperState is set
to reset."
::= { rttMonCtrlOperEntry 3 }
rttMonCtrlOperOctetsInUse OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the number of octets currently in use
by this composite conceptual RTT row. A composite
conceptual row include the control, statistics, and
history conceptual rows combined. (All octets that
are addressed via the rttMonCtrlAdminIndex in this
mib.)"
::= { rttMonCtrlOperEntry 4 }
rttMonCtrlOperConnectionLostOccurred OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object will only change its value when the
RttMonRttType is 'echo' or 'pathEcho'.
This object is set to true when the RTT connection fails
to be established or is lost, and set to false when a
connection is reestablished. When the RttMonRttType
is 'pathEcho', connection loss applies only to the
rttMonEchoAdminTargetAddress and not to intermediate
hops to the Target.
When this value changes and
rttMonReactAdminConnectionEnable is true, a reaction
will occur.
If a trap is sent it is a
rttMonConnectionChangeNotification.
When this value changes and any one of the rttMonReactTable row
has rttMonReactVar object value as 'connectionLoss(8)',
a reaction may occur.
If a trap is sent it is rttMonNotification with rttMonReactVar
value of 'connectionLoss'."
DEFVAL { false }
::= { rttMonCtrlOperEntry 5 }
rttMonCtrlOperTimeoutOccurred OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object will change its value for all
RttMonRttTypes.
This object is set to true when an operation times out,
and set to false when an operation completes under
rttMonCtrlAdminTimeout. When this value changes, a
reaction may occur, as defined by
rttMonReactAdminTimeoutEnable.
When the RttMonRttType is 'pathEcho', this timeout
applies only to the rttMonEchoAdminTargetAddress and
not to intermediate hops to the Target.
If a trap is sent it is a rttMonTimeoutNotification.
When this value changes and any one of the rttMonReactTable
row has rttMonReactVar object value as 'timeout(7)', a reaction
may occur.
If a trap is sent it is rttMonNotification with rttMonReactVar
value of 'timeout'."
DEFVAL { false }
::= { rttMonCtrlOperEntry 6 }
rttMonCtrlOperOverThresholdOccurred OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object will change its value for all
RttMonRttTypes.
This object is changed by operation completion times over
threshold, as defined by rttMonReactAdminThresholdType.
When this value changes, a reaction may occur, as defined
by rttMonReactAdminThresholdType.
If a trap is sent it is a rttMonThresholdNotification.
This object is set to true if the operation completion time
exceeds the rttMonCtrlAdminThreshold and set to false when an
operation completes under rttMonCtrlAdminThreshold. When this
value changes, a reaction may occur, as defined by
rttMonReactThresholdType.
If a trap is sent it is rttMonNotification with rttMonReactVar
value of 'rtt'."
DEFVAL { false }
::= { rttMonCtrlOperEntry 7 }
rttMonCtrlOperNumRtts OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the total number of probe operations that have
been attempted.
This value is incremented for each start of an RTT
operation. Thus when rttMonCtrlAdminRttType is set to
'pathEcho' this value will be incremented by one and
not for very every hop along the path.
This object has the special behavior as defined by the
ROLLOVER NOTE in the DESCRIPTION of the ciscoRttMonMIB
object.
This value is not effected by the rollover of a statistics
hourly group."
::= { rttMonCtrlOperEntry 8 }
rttMonCtrlOperRttLife OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is decremented every second, until it
reaches zero. When the value of this object is zero
RTT operations for this row are suspended. This
object will either reach zero by a countdown or
it will transition to zero via setting the
rttMonCtrlOperState.
When this object reaches zero the agent needs to
transition the rttMonCtrlOperState to 'inactive'.
REMEMBER: The value 2147483647 has a special
meaning. When this object has the
value 2147483647, this object will
not decrement. And thus the life
time will never.
When the rttMonCtrlOperState object is 'active' and
the rttMonReactTriggerOperState object transitions to
'active' this object will not be updated with the
current value of rttMonCrtlAdminRttLife object."
::= { rttMonCtrlOperEntry 9 }
rttMonCtrlOperState OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
orderlyStop(2),
immediateStop(3),
pending(4),
inactive(5),
active(6),
restart(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RttMonOperStatus object is used to
manage the 'state' of the probe that is implementing
conceptual RTT control row.
This status object has six defined values:
reset(1) - reset this entry, transition
to 'pending'
orderlyStop(2) - shutdown this entry at the end
of the next RTT operation attempt,
transition to 'inactive'
immediateStop(3) - shutdown this entry immediately
(if possible), transition to
'inactive'
pending(4) - this value is not settable and
this conceptual RTT control row is
waiting for further control either
via the rttMonScheduleAdminTable
or the rttMonReactAdminTable/
rttMonReactTriggerAdminTable;
This object can transition to this
value via two mechanisms, first by
reseting this object, and second
by creating a conceptual Rtt control
row with the
rttMonScheduleAdminRttStartTime
object with the its special value
inactive(5) - this value is not settable and
this conceptual RTT control row is
waiting for further control via
the rttMonScheduleAdminTable;
This object can transition to this
value via two mechanisms, first by
setting this object to 'orderlyStop'
or 'immediateStop', second by
the rttMonCtrlOperRttLife object
reaching zero
active(6) - this value is not settable and
this conceptual RTT control row is
currently active
restart(7) - this value is only settable when the
state is active. It clears the data
of this entry and remain on active state.
The probes action when this object is set to 'reset':
- all rows in rttMonStatsCaptureTable that relate to
this conceptual RTT control row are destroyed and
the indices are set to 1
- if rttMonStatisticsAdminNumHourGroups is not zero, a
single new rttMonStatsCaptureTable row is created
- all rows in rttMonHistoryCaptureTable that relate
to this RTT definition are destroyed and the indices
are set to 1
- implied history used for timeout or threshold
notification (see rttMonReactAdminThresholdType or
rttMonReactThresholdType)
is purged
- rttMonCtrlOperRttLife is set to
rttMonScheduleAdminRttLife
- rttMonCtrlOperNumRtts is set to zero
- rttMonCtrlOperTimeoutOccurred,
rttMonCtrlOperOverThresholdOccurred, and
rttMonCtrlOperConnectionLostOccurred are set to
false; if this causes a change in the value of
either of these objects, resolution notifications
will not occur
- the next RTT operation is controlled by the objects
in the rttMonScheduleAdminTable or the
rttMonReactAdminTable/rttMonReactTriggerAdminTable
- if the rttMonReactTriggerOperState is 'active', it
will transition to 'pending'
- all rttMonReactTriggerAdminEntries pointing to
this conceptual entry with their
rttMonReactTriggerOperState object 'active',
will transition their OperState to 'pending'
- all open connections must be maintained
This can be used to synchronize various RTT
definitions, so that the RTT requests occur
simultaneously, or as simultaneously as possible.
The probes action when this object transitions to
'inactive' (via setting this object to 'orderlyStop'
or 'immediateStop' or by rttMonCtrlOperRttLife
reaching zero):
- all statistics and history collection information
table entries will be closed and kept
- implied history used for timeout or threshold
notification (see rttMonReactAdminThresholdType or
rttMonReactThresholdType)
is purged
- rttMonCtrlOperTimeoutOccurred,
rttMonCtrlOperOverThresholdOccurred, and
rttMonCtrlOperConnectionLostOccurred are set to
false; if this causes a change in the value of
either of these objects, resolution notifications
will not occur.
- the next RTT request is controlled by the objects
in the rttMonScheduleAdminTable
- if the rttMonReactTriggerOperState is 'active', it
will transition to 'pending' (this denotes that
the Trigger will be ready the next time this
object goes active)
- all rttMonReactTriggerAdminEntries pointing to
this conceptual entry with their
rttMonReactTriggerOperState object 'active',
will transition their OperState to 'pending'
- all open connections are to be closed and cleanup.
rttMonCtrlOperState
STATE
+-------------------------------------------+
| A | B | C |
ACTION | 'pending' | 'inactive' | 'active' |
+----------------+--------------+--------------+-------------+
| OperState set | noError |inconsistent- | noError |
| to 'reset' | | Value | |
| | -> A | | -> A |
+----------------+--------------+--------------+-------------+
| OperState set | noError | noError | noError |
|to 'orderlyStop'| -> B | -> B | -> B |
| or to | | | |
|'immediateStop' | | | |
+----------------+--------------+--------------+-------------+
| Event causes | -> C | -> B | -> C |
| Trigger State | | | see (3) |
| to transition | | | |
| to 'active' | | | |
+----------------+--------------+--------------+-------------+
| AdminStatus | -> C | -> C | see (1) |
| transitions to | | | |
| 'active' & | | | |
| RttStartTime is| | | |
| special value | | | |
| of one. | | | |
+----------------+--------------+--------------+-------------+
| AdminStatus | -> A | -> A | see (1) |
| transitions to | | | |
| 'active' & | | | |
| RttStartTime is| | | |
| special value | | | |
| of less than | | | |
| current time, | | | |
| excluding one. | | | |
+----------------+--------------+--------------+-------------+
| AdminStatus | -> A | -> B | see (2) |
| transitions to | | | |
| 'notInService' | | | |
+----------------+--------------+--------------+-------------+
| AdminStatus | -> B | -> B | -> B |
| transitions to | | | |
| 'delete' | | | |
+----------------+--------------+--------------+-------------+
| AdminStatus is | -> C | -> C | -> C |
| 'active' & the | | | see (3) |
| RttStartTime | | | |
| arrives | | | |
+----------------+--------------+--------------+-------------+
| RowAgeout | -> B | -> B | -> B |
| expires | | | |
+----------------+--------------+--------------+-------------+
| OperRttLife | N/A | N/A | -> B |
| counts down to | | | |
| zero | | | |
+----------------+--------------+--------------+-------------+
(1) - rttMonCtrlOperState must have transitioned to 'inactive'
or 'pending' before the rttMonCtrlAdminStatus can
transition to 'active'. See (2).
(2) - rttMonCtrlAdminStatus cannot transition to 'notInService'
unless rttMonCtrlOperState has been previously forced
to 'inactive' or 'pending'.
(3) - when this happens the rttMonCtrlOperRttLife will not
be updated with the rttMonCtrlAdminRttLife.
NOTE: In order for all objects in a PDU to be set
at the same time, this object can not be
part of a multi-bound PDU."
::= { rttMonCtrlOperEntry 10 }
rttMonCtrlOperVerifyErrorOccurred OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is true if rttMonCtrlAdminVerifyData is
set to true and data corruption occurs."
DEFVAL { false }
::= { rttMonCtrlOperEntry 11 }
-- Latest RTT operation values
rttMonLatestRttOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonLatestRttOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of which contains the status of latest RTT
operation.
When the RttMonRttType is 'pathEcho', operations
performed to the hops along the path will be recorded
in this table.
This table augments the RTT definition table,
rttMonCtrlAdminTable."
::= { rttMonCtrl 10 }
rttMonLatestRttOperEntry OBJECT-TYPE
SYNTAX RttMonLatestRttOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that record the latest RTT operation."
AUGMENTS { rttMonCtrlAdminEntry }
::= { rttMonLatestRttOperTable 1 }
RttMonLatestRttOperEntry ::= SEQUENCE {
rttMonLatestRttOperCompletionTime Gauge32,
rttMonLatestRttOperSense RttResponseSense,
rttMonLatestRttOperApplSpecificSense Integer32,
rttMonLatestRttOperSenseDescription DisplayString,
rttMonLatestRttOperTime TimeStamp,
rttMonLatestRttOperAddress RttMonTargetAddress
}
rttMonLatestRttOperCompletionTime OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds/microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The completion time of the latest RTT operation
successfully completed.
The unit of this object will be microsecond when
rttMonCtrlAdminRttType is set to 'jitter' and
rttMonEchoAdminPrecision is set to 'microsecond'.
Otherwise, the unit of this object will be millisecond."
::= { rttMonLatestRttOperEntry 1 }
rttMonLatestRttOperSense OBJECT-TYPE
SYNTAX RttResponseSense
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A sense code for the completion status of the latest
RTT operation."
::= { rttMonLatestRttOperEntry 2 }
rttMonLatestRttOperApplSpecificSense OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An application specific sense code for the
completion status of the latest RTT operation. This
object will only be valid when the
rttMonLatestRttOperSense object is set to
'applicationSpecific'. Otherwise, this object's
value is not valid."
::= { rttMonLatestRttOperEntry 3 }
rttMonLatestRttOperSenseDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A sense description for the completion status of
the latest RTT operation when the
rttMonLatestRttOperSense object is set to
'applicationSpecific'."
::= { rttMonLatestRttOperEntry 4 }
rttMonLatestRttOperTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the agent system time at the time of the
latest RTT operation."
::= { rttMonLatestRttOperEntry 5 }
rttMonLatestRttOperAddress OBJECT-TYPE
SYNTAX RttMonTargetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the RttMonRttType is 'echo', 'pathEcho', 'udpEcho',
'tcpConnect', 'dns' and 'dlsw' this is a string which specifies
the address of the target for this RTT operation. When the
RttMonRttType is not one of these types this object will
be null.
This address will be the address of the hop along the
path to the rttMonEchoAdminTargetAddress address,
including rttMonEchoAdminTargetAddress address, or just
the rttMonEchoAdminTargetAddress address, when the
path information is not collected. This behavior is
defined by the rttMonCtrlAdminRttType object.
The interpretation of this string depends on the type
of RTT operation selected, as specified by the
rttMonEchoAdminProtocol object.
See rttMonEchoAdminTargetAddress for a complete
description."
::= { rttMonLatestRttOperEntry 6 }
-- LatestHTTPOper Table
rttMonLatestHTTPOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonLatestHTTPOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the status of latest HTTP RTT
operation."
::= { rttMonLatestOper 1 }
rttMonLatestHTTPOperEntry OBJECT-TYPE
SYNTAX RttMonLatestHTTPOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that record the latest HTTP RTT
operation. This entry is created automatically after the
rttMonCtrlAdminEntry is created. Also the entry is
automatically deleted when rttMonCtrlAdminEntry is deleted."
INDEX { rttMonCtrlAdminIndex }
::= { rttMonLatestHTTPOperTable 1 }
RttMonLatestHTTPOperEntry ::= SEQUENCE {
rttMonLatestHTTPOperRTT Gauge32,
rttMonLatestHTTPOperDNSRTT Gauge32,
rttMonLatestHTTPOperTCPConnectRTT Gauge32,
rttMonLatestHTTPOperTransactionRTT Gauge32,
rttMonLatestHTTPOperMessageBodyOctets Gauge32,
rttMonLatestHTTPOperSense RttResponseSense,
rttMonLatestHTTPErrorSenseDescription DisplayString
}
rttMonLatestHTTPOperRTT OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Round Trip Time taken to perform HTTP operation. This value
is the sum of DNSRTT, TCPConnectRTT and TransactionRTT."
::= { rttMonLatestHTTPOperEntry 1 }
rttMonLatestHTTPOperDNSRTT OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Round Trip Time taken to perform DNS query within the
HTTP operation. If an IP Address is specified in the URL,
then DNSRTT is 0."
::= { rttMonLatestHTTPOperEntry 2 }
rttMonLatestHTTPOperTCPConnectRTT OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Round Trip Time taken to connect to the HTTP server."
::= { rttMonLatestHTTPOperEntry 3 }
rttMonLatestHTTPOperTransactionRTT OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Round Trip Time taken to download the object specified by
the URL."
::= { rttMonLatestHTTPOperEntry 4 }
rttMonLatestHTTPOperMessageBodyOctets OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the message body received as a response to
the HTTP request."
::= { rttMonLatestHTTPOperEntry 5 }
rttMonLatestHTTPOperSense OBJECT-TYPE
SYNTAX RttResponseSense
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An application specific sense code for the completion status
of the latest RTT operation."
::= { rttMonLatestHTTPOperEntry 6 }
rttMonLatestHTTPErrorSenseDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An sense description for the completion status
of the latest RTT operation."
::= { rttMonLatestHTTPOperEntry 7 }
-- LatestJitterOper Table
rttMonLatestJitterOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonLatestJitterOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the status of latest Jitter
operation."
::= { rttMonLatestOper 2 }
rttMonLatestJitterOperEntry OBJECT-TYPE
SYNTAX RttMonLatestJitterOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that record the latest Jitter
operation."
INDEX { rttMonCtrlAdminIndex }
::= { rttMonLatestJitterOperTable 1 }
RttMonLatestJitterOperEntry ::= SEQUENCE {
rttMonLatestJitterOperNumOfRTT Gauge32,
rttMonLatestJitterOperRTTSum Gauge32,
rttMonLatestJitterOperRTTSum2 Gauge32,
rttMonLatestJitterOperRTTMin Gauge32,
rttMonLatestJitterOperRTTMax Gauge32,
rttMonLatestJitterOperMinOfPositivesSD Gauge32,
rttMonLatestJitterOperMaxOfPositivesSD Gauge32,
rttMonLatestJitterOperNumOfPositivesSD Gauge32,
rttMonLatestJitterOperSumOfPositivesSD Gauge32,
rttMonLatestJitterOperSum2PositivesSD Gauge32,
rttMonLatestJitterOperMinOfNegativesSD Gauge32,
rttMonLatestJitterOperMaxOfNegativesSD Gauge32,
rttMonLatestJitterOperNumOfNegativesSD Gauge32,
rttMonLatestJitterOperSumOfNegativesSD Gauge32,
rttMonLatestJitterOperSum2NegativesSD Gauge32,
rttMonLatestJitterOperMinOfPositivesDS Gauge32,
rttMonLatestJitterOperMaxOfPositivesDS Gauge32,
rttMonLatestJitterOperNumOfPositivesDS Gauge32,
rttMonLatestJitterOperSumOfPositivesDS Gauge32,
rttMonLatestJitterOperSum2PositivesDS Gauge32,
rttMonLatestJitterOperMinOfNegativesDS Gauge32,
rttMonLatestJitterOperMaxOfNegativesDS Gauge32,
rttMonLatestJitterOperNumOfNegativesDS Gauge32,
rttMonLatestJitterOperSumOfNegativesDS Gauge32,
rttMonLatestJitterOperSum2NegativesDS Gauge32,
rttMonLatestJitterOperPacketLossSD Gauge32,
rttMonLatestJitterOperPacketLossDS Gauge32,
rttMonLatestJitterOperPacketOutOfSequence Gauge32,
rttMonLatestJitterOperPacketMIA Gauge32,
rttMonLatestJitterOperPacketLateArrival Gauge32,
rttMonLatestJitterOperSense RttResponseSense,
rttMonLatestJitterErrorSenseDescription DisplayString,
rttMonLatestJitterOperOWSumSD Gauge32,
rttMonLatestJitterOperOWSum2SD Gauge32,
rttMonLatestJitterOperOWMinSD Gauge32,
rttMonLatestJitterOperOWMaxSD Gauge32,
rttMonLatestJitterOperOWSumDS Gauge32,
rttMonLatestJitterOperOWSum2DS Gauge32,
rttMonLatestJitterOperOWMinDS Gauge32,
rttMonLatestJitterOperOWMaxDS Gauge32,
rttMonLatestJitterOperNumOfOW Gauge32,
rttMonLatestJitterOperMOS Gauge32,
rttMonLatestJitterOperICPIF Gauge32,
rttMonLatestJitterOperIAJOut Gauge32,
rttMonLatestJitterOperIAJIn Gauge32,
rttMonLatestJitterOperAvgJitter Gauge32,
rttMonLatestJitterOperAvgSDJ Gauge32,
rttMonLatestJitterOperAvgDSJ Gauge32,
rttMonLatestJitterOperOWAvgSD Gauge32,
rttMonLatestJitterOperOWAvgDS Gauge32,
rttMonLatestJitterOperNTPState INTEGER,
rttMonLatestJitterOperUnSyncRTs Counter32,
rttMonLatestJitterOperRTTSumHigh Gauge32,
rttMonLatestJitterOperRTTSum2High Gauge32,
rttMonLatestJitterOperOWSumSDHigh Gauge32,
rttMonLatestJitterOperOWSum2SDHigh Gauge32,
rttMonLatestJitterOperOWSumDSHigh Gauge32,
rttMonLatestJitterOperOWSum2DSHigh Gauge32,
rttMonLatestJitterOperNumOverThresh Gauge32
}
rttMonLatestJitterOperNumOfRTT OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RTT's that were successfully measured."
::= { rttMonLatestJitterOperEntry 1 }
rttMonLatestJitterOperRTTSum OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of Jitter RTT's that are successfully measured (low
order 32 bits). The high order 32 bits are stored in
rttMonLatestJitterOperRTTSumHigh."
::= { rttMonLatestJitterOperEntry 2 }
rttMonLatestJitterOperRTTSum2 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTT's that are successfully measured (low
order 32 bits). The high order 32 bits are stored in
rttMonLatestJitterOperRTTSum2High."
::= { rttMonLatestJitterOperEntry 3 }
rttMonLatestJitterOperRTTMin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of RTT's that were successfully measured."
::= { rttMonLatestJitterOperEntry 4 }
rttMonLatestJitterOperRTTMax OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of RTT's that were successfully measured."
::= { rttMonLatestJitterOperEntry 5 }
rttMonLatestJitterOperMinOfPositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all positive jitter values from packets sent
from source to destination."
::= { rttMonLatestJitterOperEntry 6 }
rttMonLatestJitterOperMaxOfPositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all positive jitter values from packets sent
from source to destination."
::= { rttMonLatestJitterOperEntry 7 }
rttMonLatestJitterOperNumOfPositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all positive jitter values from packets
sent from source to destination."
::= { rttMonLatestJitterOperEntry 8 }
rttMonLatestJitterOperSumOfPositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTT's of all positive jitter values from packets
sent from source to destination."
::= { rttMonLatestJitterOperEntry 9 }
rttMonLatestJitterOperSum2PositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of RTT's of all positive jitter values from
packets sent from source to destination."
::= { rttMonLatestJitterOperEntry 10 }
rttMonLatestJitterOperMinOfNegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of absolute values of all negative jitter values
from packets sent from source to destination."
::= { rttMonLatestJitterOperEntry 11 }
rttMonLatestJitterOperMaxOfNegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of absolute values of all negative jitter values
from packets sent from source to destination."
::= { rttMonLatestJitterOperEntry 12 }
rttMonLatestJitterOperNumOfNegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of number of all negative jitter values from packets
sent from source to destination."
::= { rttMonLatestJitterOperEntry 13 }
rttMonLatestJitterOperSumOfNegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all negative jitter values from packets
sent from source to destination."
::= { rttMonLatestJitterOperEntry 14 }
rttMonLatestJitterOperSum2NegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of RTT's of all negative jitter values from
packets sent from source to destination."
::= { rttMonLatestJitterOperEntry 15 }
rttMonLatestJitterOperMinOfPositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all positive jitter values from packets sent
from destination to source."
::= { rttMonLatestJitterOperEntry 16 }
rttMonLatestJitterOperMaxOfPositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all positive jitter values from packets sent
from destination to source."
::= { rttMonLatestJitterOperEntry 17 }
rttMonLatestJitterOperNumOfPositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of number of all positive jitter values from packets
sent from destination to source."
::= { rttMonLatestJitterOperEntry 18 }
rttMonLatestJitterOperSumOfPositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTT's of all positive jitter values from packets
sent from destination to source."
::= { rttMonLatestJitterOperEntry 19 }
rttMonLatestJitterOperSum2PositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTT's of all positive jitter values from
packets sent from destination to source."
::= { rttMonLatestJitterOperEntry 20 }
rttMonLatestJitterOperMinOfNegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all negative jitter values from packets sent
from destination to source."
::= { rttMonLatestJitterOperEntry 21 }
rttMonLatestJitterOperMaxOfNegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all negative jitter values from packets sent
from destination to source."
::= { rttMonLatestJitterOperEntry 22 }
rttMonLatestJitterOperNumOfNegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of number of all negative jitter values from packets
sent from destination to source."
::= { rttMonLatestJitterOperEntry 23 }
rttMonLatestJitterOperSumOfNegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTT's of all negative jitter values from packets
sent from destination to source."
::= { rttMonLatestJitterOperEntry 24 }
rttMonLatestJitterOperSum2NegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTT's of all negative jitter values from
packets sent from destination to source."
::= { rttMonLatestJitterOperEntry 25 }
rttMonLatestJitterOperPacketLossSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets lost when sent from source to
destination."
::= { rttMonLatestJitterOperEntry 26 }
rttMonLatestJitterOperPacketLossDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets lost when sent from destination to
source."
::= { rttMonLatestJitterOperEntry 27 }
rttMonLatestJitterOperPacketOutOfSequence OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets arrived out of sequence."
::= { rttMonLatestJitterOperEntry 28 }
rttMonLatestJitterOperPacketMIA OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that are lost for which we cannot
determine the direction."
::= { rttMonLatestJitterOperEntry 29 }
rttMonLatestJitterOperPacketLateArrival OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that arrived after the timeout."
::= { rttMonLatestJitterOperEntry 30 }
rttMonLatestJitterOperSense OBJECT-TYPE
SYNTAX RttResponseSense
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An application specific sense code for the completion status
of the latest Jitter RTT operation."
::= { rttMonLatestJitterOperEntry 31 }
rttMonLatestJitterErrorSenseDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An sense description for the completion status
of the latest Jitter RTT operation."
::= { rttMonLatestJitterOperEntry 32 }
rttMonLatestJitterOperOWSumSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way latency from source to destination (low
order 32 bits). The high order 32 bits are stored in
rttMonLatestJitterOperOWSumSDHigh."
::= { rttMonLatestJitterOperEntry 33 }
rttMonLatestJitterOperOWSum2SD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way latency from source to
destination (low order 32 bits). The high order 32 bits are
stored in rttMonLatestJitterOperOWSum2SDHigh."
::= { rttMonLatestJitterOperEntry 34 }
rttMonLatestJitterOperOWMinSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all one way latency from source to
destination."
::= { rttMonLatestJitterOperEntry 35 }
rttMonLatestJitterOperOWMaxSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all one way latency from source to
destination."
::= { rttMonLatestJitterOperEntry 36 }
rttMonLatestJitterOperOWSumDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way latency from destination to source (low
order 32 bits). The high order 32 bits are stored in
rttMonLatestJitterOperOWSumDSHigh."
::= { rttMonLatestJitterOperEntry 37 }
rttMonLatestJitterOperOWSum2DS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way latency from destination to
source (low order 32 bits). The high order 32 bits are stored in
rttMonLatestJitterOperOWSum2DSHigh."
::= { rttMonLatestJitterOperEntry 38 }
rttMonLatestJitterOperOWMinDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all one way latency from destination to
source."
::= { rttMonLatestJitterOperEntry 39 }
rttMonLatestJitterOperOWMaxDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all one way latency from destination to
source."
::= { rttMonLatestJitterOperEntry 40 }
rttMonLatestJitterOperNumOfOW OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful one way latency measurements."
::= { rttMonLatestJitterOperEntry 41 }
rttMonLatestJitterOperMOS OBJECT-TYPE
SYNTAX Gauge32 (0 | 100..500)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MOS value for the latest jitter operation in hundreds.
This value will be 0 if
- rttMonEchoAdminCodecType of the operation is notApplicable
- the operation is not started
- the operation is started but failed
This value will be 1 for packet loss of 10% or more."
::= { rttMonLatestJitterOperEntry 42 }
rttMonLatestJitterOperICPIF OBJECT-TYPE
SYNTAX Gauge32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents ICPIF value for the latest jitter operation.
This value will be 93 for packet loss of 10% or more."
::= { rttMonLatestJitterOperEntry 43 }
rttMonLatestJitterOperIAJOut OBJECT-TYPE
SYNTAX Gauge32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interarrival Jitter (RC1889) at responder."
REFERENCE
"Refer to the following documents for the definition: RFC 1889"
::= { rttMonLatestJitterOperEntry 44 }
rttMonLatestJitterOperIAJIn OBJECT-TYPE
SYNTAX Gauge32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interarrival Jitter (RFC1889) at source."
REFERENCE
"Refer to the following documents for the definition: RFC 1889"
::= { rttMonLatestJitterOperEntry 45 }
rttMonLatestJitterOperAvgJitter OBJECT-TYPE
SYNTAX Gauge32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of positive and negative jitter
values in SD and DS direction for latest operation."
::= { rttMonLatestJitterOperEntry 46 }
rttMonLatestJitterOperAvgSDJ OBJECT-TYPE
SYNTAX Gauge32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of positive and negative jitter values
from source to destination for latest operation."
::= { rttMonLatestJitterOperEntry 47 }
rttMonLatestJitterOperAvgDSJ OBJECT-TYPE
SYNTAX Gauge32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of positive and negative jitter values
from destination to source for latest operation."
::= { rttMonLatestJitterOperEntry 48 }
rttMonLatestJitterOperOWAvgSD OBJECT-TYPE
SYNTAX Gauge32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average latency value from source to destination."
::= { rttMonLatestJitterOperEntry 49 }
rttMonLatestJitterOperOWAvgDS OBJECT-TYPE
SYNTAX Gauge32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average latency value from destination to source."
::= { rttMonLatestJitterOperEntry 50 }
rttMonLatestJitterOperNTPState OBJECT-TYPE
SYNTAX INTEGER {
sync(1),
outOfSync(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of sync(1) means sender and responder was in sync
with NTP. The NTP sync means the total of NTP offset
on sender and responder is within configured tolerance level."
::= { rttMonLatestJitterOperEntry 51 }
rttMonLatestJitterOperUnSyncRTs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RTT operations that have completed with
sender and responder out of sync with NTP. The NTP sync means
the total of NTP offset on sender and responder is within
configured tolerance level."
::= { rttMonLatestJitterOperEntry 52 }
rttMonLatestJitterOperRTTSumHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of Jitter RTT's that are successfully measured.
(high order 32 bits). The low order 32 bits are stored
in rttMonLatestJitterOperRTTSum."
::= { rttMonLatestJitterOperEntry 53 }
rttMonLatestJitterOperRTTSum2High OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTT's that are successfully measured
(high order 32 bits). The low order 32 bits are stored in
rttMonLatestJitterOperRTTSum2."
::= { rttMonLatestJitterOperEntry 54 }
rttMonLatestJitterOperOWSumSDHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way latency from source to destination
(high order 32 bits). The low order 32 bits are stored in
rttMonLatestJitterOperOWSumSD."
::= { rttMonLatestJitterOperEntry 55 }
rttMonLatestJitterOperOWSum2SDHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way latency from source to
destination (high order 32 bits). The low order 32 bits
are stored in rttMonLatestJitterOperOWSum2SD."
::= { rttMonLatestJitterOperEntry 56 }
rttMonLatestJitterOperOWSumDSHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way latency from destination to source
(high order 32 bits). The low order 32 bits are stored
in rttMonLatestJitterOperOWSumDS."
::= { rttMonLatestJitterOperEntry 57 }
rttMonLatestJitterOperOWSum2DSHigh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way latency from destination to
source (high order 32 bits). The low order 32 bits are
stored in rttMonLatestJitterOperOWSum2DS."
::= { rttMonLatestJitterOperEntry 58 }
rttMonLatestJitterOperNumOverThresh OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of RTTs that were over
the threshold value."
::= { rttMonLatestJitterOperEntry 59 }
-- Reaction Trigger Administration Table
rttMonReactTriggerAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonReactTriggerAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of which contains the list of conceptual RTT
control rows that will start to collect data when a
reaction condition is violated and when
rttMonReactAdminActionType is set to one of the
following:
- triggerOnly
- trapAndTrigger
- nmvtAndTrigger
- trapNmvtAndTrigger
or when a reaction condition is violated and when any of the
row in rttMonReactTable has rttMonReactActionType as one of
the following:
- triggerOnly
- trapAndTrigger
The goal of this table is to define one or more
additional conceptual RTT control rows that will become
active and start to collect additional history and
statistics (depending on the rows configuration values),
when a problem has been detected.
If the conceptual RTT control row is undefined, and a
trigger occurs, no action will take place.
If the conceptual RTT control row is scheduled to start
at a later time, triggering that row will have no effect.
If the conceptual RTT control row is currently active,
triggering that row will have no effect on that row, but
the rttMonReactTriggerOperState object will transition to
'active'.
An entry in this table can only be triggered when
it is not currently in a triggered state. The
object rttMonReactTriggerOperState will
reflect the state of each entry in this table."
::= { rttMonCtrl 11 }
rttMonReactTriggerAdminEntry OBJECT-TYPE
SYNTAX RttMonReactTriggerAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that will be triggered when
a reaction condition is violated."
INDEX {
rttMonCtrlAdminIndex,
rttMonReactTriggerAdminRttMonCtrlAdminIndex
}
::= { rttMonReactTriggerAdminTable 1 }
RttMonReactTriggerAdminEntry ::= SEQUENCE {
rttMonReactTriggerAdminRttMonCtrlAdminIndex Integer32,
rttMonReactTriggerAdminStatus RowStatus
}
rttMonReactTriggerAdminRttMonCtrlAdminIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object points to a single conceptual Rtt control
row. If this row does not exist and this value is
triggered no action will result.
The conceptual Rtt control row will be triggered for the
rttMonCtrlOperRttLife length. If this conceptual Rtt
control row is already active, rttMonCtrlOperRttLife will
not be updated, and its life will continue as previously
defined."
::= { rttMonReactTriggerAdminEntry 1 }
rttMonReactTriggerAdminStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create Trigger entries."
::= { rttMonReactTriggerAdminEntry 2 }
-- Reaction Violation Trigger Operational State Table
rttMonReactTriggerOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonReactTriggerOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of which contains the operational state
of each entry in the
rttMonReactTriggerAdminTable.
This table augments the RTT trigger
definition table, rttMonReactTriggerAdminTable."
::= { rttMonCtrl 12 }
rttMonReactTriggerOperEntry OBJECT-TYPE
SYNTAX RttMonReactTriggerOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of state objects for the
rttMonReactTriggerAdminTable."
AUGMENTS { rttMonReactTriggerAdminEntry }
::= { rttMonReactTriggerOperTable 1 }
RttMonReactTriggerOperEntry ::= SEQUENCE {
rttMonReactTriggerOperState INTEGER
}
rttMonReactTriggerOperState OBJECT-TYPE
SYNTAX INTEGER {
active(1),
pending(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object takes on the value active
when its associated entry in the
rttMonReactTriggerAdminTable has been
triggered.
When the associated entry in the
rttMonReactTriggerAdminTable is not under
a trigger state, this object will be
pending.
When this object is in the active state
this entry can not be retriggered."
::= { rttMonReactTriggerOperEntry 1 }
-- EchoPath Admin Table
rttMonEchoPathAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonEchoPathAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to store the hop addresses in a Loose Source Routing
path. Response times are computed along the specified path
using ping.
This maximum table size is limited by the size of the
maximum number of hop addresses that can fit in an IP header,
which is 8. The object rttMonEchoPathAdminEntry will reflect
this tables maximum number of entries.
This table is coupled with rttMonCtrlAdminStatus."
::= { rttMonCtrl 13 }
rttMonEchoPathAdminEntry OBJECT-TYPE
SYNTAX RttMonEchoPathAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that define intermediate hop's IP Address.
This entry can be added only if the rttMonCtrlAdminRttType is
'echo'. The entry gets deleted when the corresponding RTR entry,
which has an index of rttMonCtrlAdminIndex, is deleted."
INDEX {
rttMonCtrlAdminIndex,
rttMonEchoPathAdminHopIndex
}
::= { rttMonEchoPathAdminTable 1 }
RttMonEchoPathAdminEntry ::= SEQUENCE {
rttMonEchoPathAdminHopIndex Integer32,
rttMonEchoPathAdminHopAddress RttMonTargetAddress
}
rttMonEchoPathAdminHopIndex OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies a row in the rttMonEchoPathAdminTable.
This number represents the hop address number in a specific
ping path. All the indicies should start from 1 and must be
contiguous ie., entries should be
(say rttMonCtrlAdminIndex = 1)
1.1, 1.2, 1.3, they cannot be 1.1, 1.2, 1.4"
::= { rttMonEchoPathAdminEntry 1 }
rttMonEchoPathAdminHopAddress OBJECT-TYPE
SYNTAX RttMonTargetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which specifies the address of an intermediate hop's
IP Address for a RTT 'echo' operation"
::= { rttMonEchoPathAdminEntry 2 }
rttMonGrpScheduleAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonGrpScheduleAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Round Trip Time (RTT) monitoring group scheduling
specific definitions.
This table is used to create a conceptual group scheduling
control row. The entries in this control row contain objects
used to define group schedule configuration parameters.
The objects of this table will be used to schedule a group of
probes identified by the conceptual rows of the
rttMonCtrlAdminTable."
::= { rttMonCtrl 14 }
rttMonGrpScheduleAdminEntry OBJECT-TYPE
SYNTAX RttMonGrpScheduleAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that define a conceptual group scheduling
control row."
INDEX { rttMonGrpScheduleAdminIndex }
::= { rttMonGrpScheduleAdminTable 1 }
RttMonGrpScheduleAdminEntry ::= SEQUENCE {
rttMonGrpScheduleAdminIndex Integer32,
rttMonGrpScheduleAdminProbes DisplayString,
rttMonGrpScheduleAdminPeriod Integer32,
rttMonGrpScheduleAdminFrequency Integer32,
rttMonGrpScheduleAdminLife Integer32,
rttMonGrpScheduleAdminAgeout Integer32,
rttMonGrpScheduleAdminStatus RowStatus,
rttMonGrpScheduleAdminFreqMax Integer32,
rttMonGrpScheduleAdminFreqMin Integer32,
rttMonGrpScheduleAdminStartTime Integer32,
rttMonGrpScheduleAdminAdd TruthValue,
rttMonGrpScheduleAdminDelete TruthValue,
rttMonGrpScheduleAdminReset TruthValue,
rttMonGrpScheduleAdminStartType RttMonScheduleStartType,
rttMonGrpScheduleAdminStartDelay Integer32
}
rttMonGrpScheduleAdminIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies a row in the
rttMonGrpScheduleAdminTable.
This is a pseudo-random number selected by the management
station when creating a row via the
rttMonGrpScheduleAdminStatus object. If the pseudo-random
number is already in use an 'inconsistentValue' return code
will be returned when set operation is attempted."
::= { rttMonGrpScheduleAdminEntry 1 }
rttMonGrpScheduleAdminProbes OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..200))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which holds the different probes which are to be
group scheduled. The probes can be specified in the following
forms.
(a) Individual ID's with comma separated as 23,45,34.
(b) Range form including hyphens with multiple ranges being
separated by a comma as 1-10,12-34.
(c) Mix of the above two forms as 1,2,4-10,12,15,19-25.
Any whitespace in the string is considered an error. Duplicates
and overlapping ranges as an example 1,2,3,2-10 are considered
fine. For a single range like 1-20 the upper value (in this
example 20) must be greater than lower value (1), otherwise it's
treated as an error. The agent will not normalize the list e.g.,
it will not change 1,2,1-10 or even 1,2,3,4,5,6.. to 1-10."
DEFVAL { "" }
::= { rttMonGrpScheduleAdminEntry 2 }
rttMonGrpScheduleAdminPeriod OBJECT-TYPE
SYNTAX Integer32 (0..604800)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the time duration over which all the probes have to
be scheduled."
DEFVAL { 0 }
::= { rttMonGrpScheduleAdminEntry 3 }
rttMonGrpScheduleAdminFrequency OBJECT-TYPE
SYNTAX Integer32 (0..604800)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the duration between initiating each RTT
operation for all the probes specified in the group.
The value of this object is only effective when both
rttMonGrpScheduleAdminFreqMax and rttMonGrpScheduleAdminFreqMin
have zero values."
DEFVAL { 0 }
::= { rttMonGrpScheduleAdminEntry 4 }
rttMonGrpScheduleAdminLife OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the life of all the probes included in
the object rttMonGrpScheduleAdminProbes, that are getting group
scheduled. This value will be placed into
rttMonScheduleAdminRttLife object for each of the probes listed
in rttMonGrpScheduleAdminProbes when this conceptual control
row becomes 'active'.
The value 2147483647 has a special meaning. When this object is
set to 2147483647, the rttMonCtrlOperRttLife object for all the
probes listed in rttMonGrpScheduleAdminProbes, will not
decrement. And thus the life time of the probes will never end."
DEFVAL { 3600 }
::= { rttMonGrpScheduleAdminEntry 5 }
rttMonGrpScheduleAdminAgeout OBJECT-TYPE
SYNTAX Integer32 (0..2073600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the ageout value of all the probes
included in the object rttMonGrpScheduleAdminProbes, that are
getting group scheduled. This value will be placed into
rttMonScheduleAdminConceptRowAgeout object for each of the
probes listed in rttMonGrpScheduleAdminProbes when this
conceptual control row becomes 'active'.
When this value is set to zero, the probes listed in
rttMonGrpScheduleAdminProbes, will never ageout."
DEFVAL { 3600 }
::= { rttMonGrpScheduleAdminEntry 6 }
rttMonGrpScheduleAdminStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the conceptual RTT group schedule control row.
In order for this object to become active, the following
row objects must be defined:
- rttMonGrpScheduleAdminProbes
- rttMonGrpScheduleAdminPeriod
All other objects can assume default values.
The conceptual RTT group schedule control row objects cannot be
modified once this conceptual RTT group schedule control row
has been created.
Once this object is in 'active' status, it cannot be set to
'notInService'.
When this object moves to 'active' state it will schedule the
probes of the rttMonCtrlAdminTable which had been created using
'createAndWait'.
This object can be set to 'destroy' from any value at any time.
When this object is set to 'destroy' it will stop all the probes
of the rttMonCtrlAdminTable, which had been group scheduled
by it earlier, before destroying the RTT group schedule
control row."
::= { rttMonGrpScheduleAdminEntry 7 }
rttMonGrpScheduleAdminFreqMax OBJECT-TYPE
SYNTAX Integer32 (0..604800)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the max duration between initiating each RTT
operation for all the probes specified in the group.
If this is 0 and rttMonGrpScheduleAdminFreqMin is also 0
then rttMonGrpScheduleAdminFrequency becomes the fixed
frequency."
DEFVAL { 0 }
::= { rttMonGrpScheduleAdminEntry 8 }
rttMonGrpScheduleAdminFreqMin OBJECT-TYPE
SYNTAX Integer32 (0..604800)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the min duration between initiating each RTT
operation for all the probes specified in the group.
The value of this object cannot be greater than the value of
rttMonGrpScheduleAdminFreqMax.
If this is 0 and rttMonGrpScheduleAdminFreqMax is 0 then
rttMonGrpScheduleAdminFrequency becomes the fixed frequency."
DEFVAL { 0 }
::= { rttMonGrpScheduleAdminEntry 9 }
rttMonGrpScheduleAdminStartTime OBJECT-TYPE
SYNTAX Integer32 (0..604800)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the time in seconds after which the member probes of
this group specified in rttMonGrpScheduleAdminProbes will
transition to active state
If rttMonScheduleAdminStartType is specified with this
object then rttMonScheduleAdminRttStartTime
is ignored and group start time is configured based on
rttMonScheduleAdminStartType."
DEFVAL { 0 }
::= { rttMonGrpScheduleAdminEntry 10 }
rttMonGrpScheduleAdminAdd OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Addition of members to an existing group will be allowed
if this object is set to TRUE (1). The members, IDs of
which are mentioned in rttMonGrpScheduleAdminProbes object
are added to the existing group"
::= { rttMonGrpScheduleAdminEntry 11 }
rttMonGrpScheduleAdminDelete OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Removal of members from an existing group will be allowed
if this object is set to TRUE (1). The members, IDs of
which are mentioned in rttMonGrpScheduleAdminProbes object
are removed from the existing group"
::= { rttMonGrpScheduleAdminEntry 12 }
rttMonGrpScheduleAdminReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When this is set to true then all members
of this group will be stopped and rescheduled using the
previously set values of this group."
::= { rttMonGrpScheduleAdminEntry 13 }
rttMonGrpScheduleAdminStartType OBJECT-TYPE
SYNTAX RttMonScheduleStartType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the start-time option to be used for
scheduling the start time of the group with
probes included in the object rttMonGrpScheduleAdminProbes.
The following list defines the start-time options
that can be configured for the group schedule:
pending(1) pending state.
now(2) schedule to immediately start the
group with defined probes.
random(3) schedule start time of group at random
time over a range.
after(4) schedule start time of group after a
certain amount of time from now.
specific(5) schedule start time of group at a given
specific time interval."
DEFVAL { pending }
::= { rttMonGrpScheduleAdminEntry 14 }
rttMonGrpScheduleAdminStartDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the start time delay range in
milliseconds.
The value of this object is only effective with
rttMonScheduleAdminStartType value.
For rttMonGrpScheduleAdminStartType with random option,
a random time is generated with in provided start delay
range and added to current time to generate the random
start time of the group with defined probes."
DEFVAL { 0 }
::= { rttMonGrpScheduleAdminEntry 15 }
-- Auto SAA L3 MPLS VPN Configuration Definitions
rttMplsVpnMonCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMplsVpnMonCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Auto SAA L3 MPLS VPN definitions.
The Auto SAA L3 MPLS VPN administration control is in multiple
tables.
This first table, is used to create a conceptual Auto SAA L3
MPLS VPN control row. The following tables contain objects
which used in type specific configurations, scheduling and
reaction configurations. All of these tables will create the
same conceptual control row as this table using this table's
index as their own index.
In order to a row in this table to become active the following
objects must be defined.
rttMplsVpnMonCtrlRttType,
rttMplsVpnMonCtrlVrfName and
rttMplsVpnMonSchedulePeriod."
::= { rttMonCtrl 15 }
rttMplsVpnMonCtrlEntry OBJECT-TYPE
SYNTAX RttMplsVpnMonCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A base list of objects that define a conceptual Auto SAA L3
MPLS VPN control row."
INDEX { rttMplsVpnMonCtrlIndex }
::= { rttMplsVpnMonCtrlTable 1 }
RttMplsVpnMonCtrlEntry ::= SEQUENCE {
rttMplsVpnMonCtrlIndex Integer32,
rttMplsVpnMonCtrlRttType RttMplsVpnMonRttType,
rttMplsVpnMonCtrlVrfName OCTET STRING,
rttMplsVpnMonCtrlTag DisplayString,
rttMplsVpnMonCtrlThreshold Integer32,
rttMplsVpnMonCtrlTimeout Integer32,
rttMplsVpnMonCtrlScanInterval Integer32,
rttMplsVpnMonCtrlDelScanFactor Integer32,
rttMplsVpnMonCtrlEXP Integer32,
rttMplsVpnMonCtrlRequestSize Integer32,
rttMplsVpnMonCtrlVerifyData TruthValue,
rttMplsVpnMonCtrlStorageType StorageType,
rttMplsVpnMonCtrlProbeList DisplayString,
rttMplsVpnMonCtrlStatus RowStatus,
rttMplsVpnMonCtrlLpd TruthValue,
rttMplsVpnMonCtrlLpdGrpList DisplayString,
rttMplsVpnMonCtrlLpdCompTime Integer32
}
rttMplsVpnMonCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies a row in the rttMplsVpnMonCtrlTable.
This is a pseudo-random number selected by the management
station when creating a row via the
rttMplsVpnMonCtrlStatus object.
If the pseudo-random number is already in use an
'inconsistentValue' return code will be returned when set
operation is attempted."
::= { rttMplsVpnMonCtrlEntry 1 }
rttMplsVpnMonCtrlRttType OBJECT-TYPE
SYNTAX RttMplsVpnMonRttType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of RTT operation to be performed for Auto SAA L3
MPLS VPN.
This value must be set in the same PDU of
rttMplsVpnMonCtrlStatus.
This value must be set before setting
any other parameter configuration of an Auto SAA L3 MPLS VPN."
::= { rttMplsVpnMonCtrlEntry 2 }
rttMplsVpnMonCtrlVrfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field is used to specify the VPN name for which
the Auto SAA L3 MPLS VPN RTT operation will be used.
This value must be set in the same PDU of
rttMplsVpnMonCtrlStatus.
The Auto SAA L3 MPLS VPN will find the PEs participating in
this VPN and configure RTT operation corresponding to value
specified in rttMplsVpnMonCtrlRttType.
If the VPN corresponds to the value configured for this object
doesn't exist 'inconsistentValue' error will be returned.
The value 'saa-vrf-all' has a special meaning. When this
object is set to 'saa-vrf-all', all the VPNs in the PE will be
discovered and Auto SAA L3 MPLS VPN will configure RTT
operations corresponding to all these PEs with the value
specified in rttMplsVpnMonCtrlRttType as type for those
operations.
So, the user should avoid using this string for a particular
VPN name when using this feature in order to avoid ambiguity."
::= { rttMplsVpnMonCtrlEntry 3 }
rttMplsVpnMonCtrlTag OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which is used by a managing application to
identify the RTT target.
This string will be configured as rttMonCtrlAdminTag for all
the operations configured by this Auto SAA L3 MPLS VPN.
The usage of this value in Auto SAA L3 MPLS VPN is same as
rttMonCtrlAdminTag in RTT operation."
DEFVAL { "" }
::= { rttMplsVpnMonCtrlEntry 4 }
rttMplsVpnMonCtrlThreshold OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines an administrative threshold limit.
This value will be configured as rttMonCtrlAdminThreshold for
all the operations that will be configured by the current
Auto SAA L3 MPLS VPN.
The usage of this value in Auto SAA L3 MPLS VPN is same as
rttMonCtrlAdminThreshold."
DEFVAL { 5000 }
::= { rttMplsVpnMonCtrlEntry 5 }
rttMplsVpnMonCtrlTimeout OBJECT-TYPE
SYNTAX Integer32 (0..604800000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the duration to wait for a RTT operation configured
automatically by the Auto SAA L3 MPLS VPN to complete.
The value of this object cannot be set to a value which would
specify a duration exceeding rttMplsVpnMonScheduleFrequency.
The usage of this value in Auto SAA L3 MPLS VPN is similar to
rttMonCtrlAdminTimeout."
DEFVAL { 5000 }
::= { rttMplsVpnMonCtrlEntry 6 }
rttMplsVpnMonCtrlScanInterval OBJECT-TYPE
SYNTAX Integer32 (1..70560)
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the frequency at which the automatic PE addition
should take place if there is any for an Auto SAA L3 MPLS VPN.
New RTT operations corresponding to the new PEs discovered will
be created and scheduled.
The default value for this object is 4 hours. The maximum value
supported is 49 days."
DEFVAL { 240 }
::= { rttMplsVpnMonCtrlEntry 7 }
rttMplsVpnMonCtrlDelScanFactor OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the frequency at which the automatic PE deletion
should take place.
This object specifies the number of times of
rttMonMplslmCtrlScanInterval (rttMplsVpnMonCtrlDelScanFactor *
rttMplsVpnMonCtrlScanInterval) to wait before removing the PEs.
This object doesn't directly specify the explicit value to
wait before removing the PEs that were down.
If this object set 0 the entries will never removed."
DEFVAL { 1 }
::= { rttMplsVpnMonCtrlEntry 8 }
rttMplsVpnMonCtrlEXP OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the EXP value that needs to be
put as precedence bit of an IP header."
DEFVAL { 0 }
::= { rttMplsVpnMonCtrlEntry 9 }
rttMplsVpnMonCtrlRequestSize OBJECT-TYPE
SYNTAX Integer32 (0..16384)
UNITS "octets"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the native payload size that needs to
be put on the packet.
This value will be configured as
rttMonEchoAdminPktDataRequestSize for all the RTT operations
configured by the current Auto SAA L3 MPLS VPN.
The minimum request size for jitter probe is 16. The maximum
for jitter probe is 1500. The default request size is 32 for
jitter probe.
For echo and pathEcho default request size is 28.
The minimum request size for echo and pathEcho is 28 bytes."
DEFVAL { 1 }
::= { rttMplsVpnMonCtrlEntry 10 }
rttMplsVpnMonCtrlVerifyData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to true, the resulting data in each RTT operation
created by the current Auto SAA L3 MPLS VPN is compared with
the expected data. This includes checking header information
(if possible) and exact packet size. Any mismatch will be
recorded in the rttMonStatsCollectVerifyErrors object of each
RTT operation created by the current Auto SAA L3 MPLS VPN."
DEFVAL { false }
::= { rttMplsVpnMonCtrlEntry 11 }
rttMplsVpnMonCtrlStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type of this conceptual row. When set to
'nonVolatile', this entry will be shown in 'show running'
command and can be saved into Non-volatile memory.
By Default the entry will not be saved into Non-volatile
memory.
This object can be set to either 'volatile' or 'nonVolatile'.
Other values are not applicable for this conceptual row and
are not supported."
DEFVAL { volatile }
::= { rttMplsVpnMonCtrlEntry 12 }
rttMplsVpnMonCtrlProbeList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object holds the list of probes ID's that are created by
the Auto SAA L3 MPLS VPN.
The probes will be specified in the following form.
(a) Individual ID's with comma separated as 1,5,3.
(b) Range form including hyphens with multiple ranges being
separated by comma as 1-10,12-34.
(c) Mix of the above two forms as 1,2,4-10,12,15,19-25."
::= { rttMplsVpnMonCtrlEntry 13 }
rttMplsVpnMonCtrlStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the conceptual Auto SAA L3 MPLS VPN control row.
In order for this object to become active
rttMplsVpnMonCtrlRttType, rttMplsVpnMonCtrlVrfName and
rttMplsVpnMonSchedulePeriod objects must be defined.
All other objects can assume default values.
If the object is set to 'createAndGo' rttMplsVpnMonCtrlRttType,
rttMplsVpnMonCtrlVrfName and rttMplsVpnMonSchedulePeriod needs
to be set along with rttMplsVpnMonCtrlStatus.
If the object is set to 'createAndWait' rttMplsVpnMonCtrlRttType
and rttMplsVpnMonCtrlVrfName needs to be set along with
rttMplsVpnMonCtrlStatus. rttMplsVpnMonSchedulePeriod needs to be
specified before setting rttMplsVpnMonCtrlStatus to 'active'.
The following objects cannot be modified after creating the
Auto SAA L3 MPLS VPN conceptual row.
- rttMplsVpnMonCtrlRttType
- rttMplsVpnMonCtrlVrfName
The following objects can be modified even after creating the
Auto SAA L3 MPLS VPN conceptual row by setting this object to
'notInService'
- All other writable objects in rttMplsVpnMonCtrlTable except
rttMplsVpnMonCtrlRttType and rttMplsVpnMonCtrlVrfName.
- Objects in the rttMplsVpnMonTypeTable.
- Objects in the rttMplsVpnMonScheduleTable.
The following objects can be modified as needed without setting
this object to 'notInService' even after creating the
Auto SAA L3 MPLS VPN conceptual row.
- Objects in rttMplsVpnMonReactTable.
This object can be set to 'destroy' from any value
at any time. When this object is set to 'destroy' it will stop
and destroy all the probes created by this Auto SAA L3 MPLS VPN
before destroying Auto SAA L3 MPLS VPN control row."
::= { rttMplsVpnMonCtrlEntry 14 }
rttMplsVpnMonCtrlLpd OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to true, this implies that LPD (LSP Path Discovery)
is enabled for this row.
The Auto SAA L3 MPLS VPN will find all the paths to each of the
PE's and configure RTT operation with rttMonCtrlAdminRttType
value as 'lspGroup'. The 'lspGroup' probe will walk through
the list of set of information that uniquely identifies a path
and send the LSP echo requests across them. All these LSP echo
requests sent for 1st path, 2nd path etc. can be thought of as
'single probes' sent as a part of 'lspGroup'. These single
probes will of type 'rttMplsVpnMonCtrlRttType'.
'lspGroup' probe is a superset of individual probes that will
test multiple paths. For example Suppose there are 10 paths to
the target. One 'lspGroup' probe will be created which will
store all the information related to uniquely identify the 10
paths. When the 'lspGroup' probe will run it will sweep through
the set of information for 1st path, 2nd path, 3rd path and so
on till it has tested all the paths."
DEFVAL { false }
::= { rttMplsVpnMonCtrlEntry 15 }
rttMplsVpnMonCtrlLpdGrpList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object holds the list of LPD Group IDs that are created
for this Auto SAA L3 MPLS VPN row.
This object will be applicable only when LSP Path Discovery is
enabled for this row.
The LPD Groups will be specified in the following form.
(a) Individual ID's with comma separated as 1,5,3.
(b) Range form including hyphens with multiple ranges being
separated by comma as 1-10,12-34.
(c) Mix of the above two forms as 1,2,4-10,12,15,19-25."
::= { rttMplsVpnMonCtrlEntry 16 }
rttMplsVpnMonCtrlLpdCompTime OBJECT-TYPE
SYNTAX Integer32 (1..65535)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The completion time of the LSP Path Discovery for the entire
set of PEs which are discovered for this Auto SAA.
This object will be applicable only when LSP Path Discovery is
enabled for this row."
::= { rttMplsVpnMonCtrlEntry 17 }
-- Auto SAA L3 MPLS VPN Type Specific Configuration
rttMplsVpnMonTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMplsVpnMonTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains Auto SAA L3 MPLS VPN configured RTT
operation specific definitions.
This table is controlled via the rttMplsVpnMonCtrlTable.
Entries in this table are created via the
rttMplsVpnMonCtrlStatus object."
::= { rttMonCtrl 16 }
rttMplsVpnMonTypeEntry OBJECT-TYPE
SYNTAX RttMplsVpnMonTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that define RTT operation specific
configuration for an Auto SAA L3 MPLS VPN."
AUGMENTS { rttMplsVpnMonCtrlEntry }
::= { rttMplsVpnMonTypeTable 1 }
RttMplsVpnMonTypeEntry ::= SEQUENCE {
rttMplsVpnMonTypeInterval Integer32,
rttMplsVpnMonTypeNumPackets Integer32,
rttMplsVpnMonTypeDestPort Integer32,
rttMplsVpnMonTypeSecFreqType INTEGER,
rttMplsVpnMonTypeSecFreqValue Integer32,
rttMplsVpnMonTypeLspSelector OCTET STRING,
rttMplsVpnMonTypeLSPReplyMode RttMonLSPPingReplyMode,
rttMplsVpnMonTypeLSPTTL Integer32,
rttMplsVpnMonTypeLSPReplyDscp Integer32,
rttMplsVpnMonTypeLpdMaxSessions Integer32,
rttMplsVpnMonTypeLpdSessTimeout Integer32,
rttMplsVpnMonTypeLpdEchoTimeout Integer32,
rttMplsVpnMonTypeLpdEchoInterval Integer32,
rttMplsVpnMonTypeLpdEchoNullShim TruthValue,
rttMplsVpnMonTypeLpdScanPeriod Integer32,
rttMplsVpnMonTypeLpdStatHours Integer32
}
rttMplsVpnMonTypeInterval OBJECT-TYPE
SYNTAX Integer32 (1..60000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value represents the inter-packet delay between packets
and is in milliseconds. This value is currently used for
Jitter probe. This object is applicable to jitter probe only.
The usage of this value in RTT operation is same as
rttMonEchoAdminInterval."
DEFVAL { 20 }
::= { rttMplsVpnMonTypeEntry 1 }
rttMplsVpnMonTypeNumPackets OBJECT-TYPE
SYNTAX Integer32 (1..60000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value represents the number of packets that need to be
transmitted. This value is currently used for Jitter probe.
This object is applicable to jitter probe only.
The usage of this value in RTT operation is same as
rttMonEchoAdminNumPackets."
DEFVAL { 10 }
::= { rttMplsVpnMonTypeEntry 2 }
rttMplsVpnMonTypeDestPort OBJECT-TYPE
SYNTAX Integer32 (1..65536)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the target's port number to which the
packets need to be sent.
This value will be configured as target port for all the
operations that is going to be configured
The usage of this value is same as rttMonEchoAdminTargetPort
in RTT operation. This object is applicable to jitter type.
If this object is not being set random port will be used as
destination port."
::= { rttMplsVpnMonTypeEntry 3 }
rttMplsVpnMonTypeSecFreqType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
timeout(2),
connectionLoss(3),
both(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the reaction type for which the
rttMplsVpnMonTypeSecFreqValue should be applied.
The Value 'timeout' will cause secondary frequency to be set
for frequency on timeout condition.
The Value 'connectionLoss' will cause secondary frequency to
be set for frequency on connectionloss condition.
The Value 'both' will cause secondary frequency to be set for
frequency on either of timeout/connectionloss condition.
Notifications must be configured on corresponding reaction type
in order to rttMplsVpnMonTypeSecFreqValue get effect.
When LSP Path Discovery is enabled for this row the following
rttMplsVpnMonReactLpdNotifyType notifications must be
configured in order to rttMplsVpnMonTypeSecFreqValue get effect.
- 'lpdGroupStatus' or 'lpdAll'.
Since the Frequency of the operation changes the stats will be
collected in new bucket.
If any of the reaction type (timeout/connectionLoss) occurred
for an operation configured by this Auto SAA L3 MPLS VPN and
the following conditions are satisfied, the frequency of the
operation will be changed to rttMplsVpnMonTypeSecFreqValue.
1) rttMplsVpnMonTypeSecFreqType is set for a reaction type
(timeout/connectionLoss).
2) A notification is configured for the same reaction type
(timeout/connectionLoss).
When LSP Path Discovery is enabled for this row, if any of the
reaction type (timeout/connectionLoss) occurred for 'single
probes' configured by this Auto SAA L3 MPLS VPN and the
following conditions are satisfied, the secondary frequency
rttMplsVpnMonTypeSecFreqValue will be applied to the
'lspGroup' probe.
1) rttMplsVpnMonTypeSecFreqType is set for a reaction type
(timeout/connectionLoss/both).
2) rttMplsVpnMonReactLpdNotifyType object must be set to
value of 'lpdGroupStatus' or 'lpdAll'.
The frequency of the individual operations will be restored to
original frequency once the trap is sent."
DEFVAL { none }
::= { rttMplsVpnMonTypeEntry 4 }
rttMplsVpnMonTypeSecFreqValue OBJECT-TYPE
SYNTAX Integer32 (1..604800)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the value that needs to be applied to
secondary frequency of individual RTT operations configured by
Auto SAA L3 MPLS VPN.
Setting rttMplsVpnMonTypeSecFreqValue without setting
rttMplsVpnMonTypeSecFreqType will not have any effect."
DEFVAL { 60 }
::= { rttMplsVpnMonTypeEntry 5 }
rttMplsVpnMonTypeLspSelector OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which specifies the address of the local host
(127.X.X.X).
This object will be used as lsp-selector in MPLS RTT
operations configured by the Auto SAA L3 MPLS VPN.
When LSP Path Discovery is enabled for the row, this object will
be used to indicate the base LSP selector value to be used in
the LSP Path Discovery.
This value of this object is significant in MPLS load
balancing scenario. This value will be used as one of the
parameter in that load balancing."
DEFVAL { "7F 00 00 01" }
::= { rttMplsVpnMonTypeEntry 6 }
rttMplsVpnMonTypeLSPReplyMode OBJECT-TYPE
SYNTAX RttMonLSPPingReplyMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the reply mode for the LSP Echo
requests originated by the operations configured by the
Auto SAA L3 MPLS VPN.
This object is currently used by echo and pathEcho."
DEFVAL { replyIpv4Udp }
::= { rttMplsVpnMonTypeEntry 7 }
rttMplsVpnMonTypeLSPTTL OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the TTL setting for MPLS echo request
packets originated by the operations configured by the
Auto SAA L3 MPLS VPN.
This object is currently used by echo and pathEcho.
For 'echo' the default TTL will be set to 255.
For 'pathEcho' the default will be set to 30.
Note: This object cannot be set to the value of 0. The
default value of 0 signifies the default TTL values will be
used for 'echo' and 'pathEcho'."
DEFVAL { 0 }
::= { rttMplsVpnMonTypeEntry 8 }
rttMplsVpnMonTypeLSPReplyDscp OBJECT-TYPE
SYNTAX Integer32 (0..63 | 255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the DSCP value to be set in the IP header
of the LSP echo reply packet.
The value of this object will be in range of DiffServ codepoint
values between 0 to 63.
Note: This object cannot be set to value of 255. This default
value specifies that DSCP is not set for this row."
DEFVAL { 255 }
::= { rttMplsVpnMonTypeEntry 9 }
rttMplsVpnMonTypeLpdMaxSessions OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the number of concurrent path discovery
requests that will be active at one time per MPLS VPN control
row. This object is meant for reducing the time for discovery
of all the paths to the target in a large customer network.
However its value should be chosen such that it does not cause
any performance impact.
Note: If the customer network has low end routers in the Core
it is recommended to keep this value low."
DEFVAL { 1 }
::= { rttMplsVpnMonTypeEntry 10 }
rttMplsVpnMonTypeLpdSessTimeout OBJECT-TYPE
SYNTAX Integer32 (1..900)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the maximum allowed duration of a
particular tree trace request.
If no response is received in configured time the request will
be considered a failure."
DEFVAL { 120 }
::= { rttMplsVpnMonTypeEntry 11 }
rttMplsVpnMonTypeLpdEchoTimeout OBJECT-TYPE
SYNTAX Integer32 (0..604800000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the timeout value for the LSP echo
requests which are sent while performing the LSP Path
Discovery."
DEFVAL { 5000 }
::= { rttMplsVpnMonTypeEntry 12 }
rttMplsVpnMonTypeLpdEchoInterval OBJECT-TYPE
SYNTAX Integer32 (0..3600000)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the send interval between LSP echo
requests which are sent while performing the LSP Path
Discovery."
DEFVAL { 0 }
::= { rttMplsVpnMonTypeEntry 13 }
rttMplsVpnMonTypeLpdEchoNullShim OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies if the explicit-null label is added to
LSP echo requests which are sent while performing the LSP Path
Discovery.
If set to TRUE all the probes configured as part of this control
row will send the LSP echo requests with the explicit-null
label added."
DEFVAL { false }
::= { rttMplsVpnMonTypeEntry 14 }
rttMplsVpnMonTypeLpdScanPeriod OBJECT-TYPE
SYNTAX Integer32 (0..7200)
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the scan time for the completion of LSP
Path Discovery for all the PEs discovered for this control row.
If the scan period is exceeded on completion of the LSP Path
Discovery for all the PEs, the next discovery will start
immediately else it will wait till expiry of scan period.
For example: If the value is set to 30 minutes then on start of
the LSP Path Discovery a timestamp will be taken say T1. At the
end of the tree trace discovery one more timestamp will be taken
again say T2. If (T2-T1) is greater than 30, the next discovery
will start immediately else next discovery will wait for
[30 - (T2-T1)].
Note: If the object is set to a special value of '0', it will
force immediate start of the next discovery on all neighbours
without any delay."
DEFVAL { 240 }
::= { rttMplsVpnMonTypeEntry 15 }
rttMplsVpnMonTypeLpdStatHours OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of hours of data to be kept per LPD
group. The LPD group statistics will be kept in an hourly
bucket. At the maximum there can be two buckets.
The value of 'one' is not advisable because the group will close
and immediately be deleted before the network management station
will have the opportunity to retrieve the statistics.
The value used in the rttMplsVpnLpdGroupStatsTable to
uniquely identify this group is the
rttMonStatsCaptureStartTimeIndex.
Note: When this object is set to the value of '0' all
rttMplsVpnLpdGroupStatsTable data capturing will be shut off."
DEFVAL { 2 }
::= { rttMplsVpnMonTypeEntry 16 }
-- Auto SAA L3 MPLS VPN Schedule Table
rttMplsVpnMonScheduleTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMplsVpnMonScheduleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Auto SAA L3 MPLS VPN monitoring scheduling
specific definitions.
This table is controlled via the rttMplsVpnMonCtrlTable.
Entries in this table are created via the
rttMplsVpnMonCtrlStatus object."
::= { rttMonCtrl 17 }
rttMplsVpnMonScheduleEntry OBJECT-TYPE
SYNTAX RttMplsVpnMonScheduleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that define specific configuration for
the scheduling of RTT operations."
AUGMENTS { rttMplsVpnMonCtrlEntry }
::= { rttMplsVpnMonScheduleTable 1 }
RttMplsVpnMonScheduleEntry ::= SEQUENCE {
rttMplsVpnMonScheduleRttStartTime TimeTicks,
rttMplsVpnMonSchedulePeriod Integer32,
rttMplsVpnMonScheduleFrequency Integer32
}
rttMplsVpnMonScheduleRttStartTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the time when this conceptual row will
activate. rttMplsVpnMonSchedulePeriod object must be specified
before setting this object.
This is the value of MIB-II's sysUpTime in the future.
When sysUpTime equals this value this object will
cause the activation of a conceptual Auto SAA L3 MPLS VPN row.
When an agent has the capability to determine date and
time, the agent should store this object as DateAndTime.
This allows the agent to be able to activate conceptual
Auto SAA L3 MPLS VPN row at the intended time.
If this object has value as 1, this means start the operation
now itself. Value of 0 puts the operation in pending state."
DEFVAL { 0 }
::= { rttMplsVpnMonScheduleEntry 1 }
rttMplsVpnMonSchedulePeriod OBJECT-TYPE
SYNTAX Integer32 (1..604800)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the time duration over which all the probes created
by the current Auto SAA L3 MPLS VPN have to be scheduled.
This object must be set first before setting
rttMplsVpnMonScheduleRttStartTime."
::= { rttMplsVpnMonScheduleEntry 2 }
rttMplsVpnMonScheduleFrequency OBJECT-TYPE
SYNTAX Integer32 (1..604800)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the duration between initiating each RTT
operation configured by the Auto SAA L3 MPLS VPN.
This object cannot be set to a value which would be a
shorter duration than rttMplsVpnMonCtrlTimeout.
The usage of this value in RTT operation is same as
rttMonCtrlAdminFrequency."
DEFVAL { 60 }
::= { rttMplsVpnMonScheduleEntry 3 }
-- Auto SAA L3 MPLS VPN Reaction Table
rttMplsVpnMonReactTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMplsVpnMonReactEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Table of Auto SAA L3 MPLS VPN Notification definitions.
This table augments the rttMplsVpnMonCtrlTable."
::= { rttMonCtrl 18 }
rttMplsVpnMonReactEntry OBJECT-TYPE
SYNTAX RttMplsVpnMonReactEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that define Auto SAA L3 MPLS VPN reaction
configuration."
AUGMENTS { rttMplsVpnMonCtrlEntry }
::= { rttMplsVpnMonReactTable 1 }
RttMplsVpnMonReactEntry ::= SEQUENCE {
rttMplsVpnMonReactConnectionEnable TruthValue,
rttMplsVpnMonReactTimeoutEnable TruthValue,
rttMplsVpnMonReactThresholdType INTEGER,
rttMplsVpnMonReactThresholdCount Integer32,
rttMplsVpnMonReactActionType INTEGER,
rttMplsVpnMonReactLpdNotifyType INTEGER,
rttMplsVpnMonReactLpdRetryCount Integer32
}
rttMplsVpnMonReactConnectionEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value set for this will be applied as
rttMonReactAdminConnectionEnable for individual probes created
by the Auto SAA L3 MPLS VPN.
When this object is set to true, rttMonReactVar for individual
probes created by the Auto SAA L3 MPLS VPN will be set to
'connectionLoss(8)'."
DEFVAL { false }
::= { rttMplsVpnMonReactEntry 1 }
rttMplsVpnMonReactTimeoutEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value set for this will be applied as
rttMonReactAdminTimeoutEnable for individual probes created
by the Auto SAA L3 MPLS VPN.
When this object is set to true, rttMonReactVar for individual
probes created by the Auto SAA L3 MPLS VPN will be set to
'timeout(7)'."
DEFVAL { false }
::= { rttMplsVpnMonReactEntry 2 }
rttMplsVpnMonReactThresholdType OBJECT-TYPE
SYNTAX INTEGER {
never(1),
immediate(2),
consecutive(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value corresponding to this object will be applied as
rttMonReactAdminThresholdType for individual probes created by
the Auto SAA L3 MPLS VPN.
The value corresponding to this object will be applied as
rttMonReactThresholdType for individual probes created by
the Auto SAA L3 MPLS VPN."
DEFVAL { never }
::= { rttMplsVpnMonReactEntry 3 }
rttMplsVpnMonReactThresholdCount OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object value will be applied as
rttMonReactAdminThresholdCount for individual probes created by
the Auto SAA L3 MPLS VPN.
This object value will be applied as rttMonReactThresholdCountX
for individual probes created by the Auto SAA L3 MPLS VPN."
DEFVAL { 5 }
::= { rttMplsVpnMonReactEntry 4 }
rttMplsVpnMonReactActionType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
trapOnly(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value corresponding to this object will be applied as
rttMonReactAdminActionType of individual probes created by
this Auto SAA L3 MPLS VPN.
The value corresponding to this object will be applied as
rttMonReactActionType of individual probes created by
this Auto SAA L3 MPLS VPN."
DEFVAL { none }
::= { rttMplsVpnMonReactEntry 5 }
rttMplsVpnMonReactLpdNotifyType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
lpdPathDiscovery(2),
lpdGroupStatus(3),
lpdAll(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the type of LPD notifications to be
generated for the current Auto SAA L3 MPLS VPN control row.
This object will be applicable only when LSP Path Discovery is
enabled for this row.
There are two types of notifications supported for the LPD -
(a) rttMonLpdDiscoveryNotification - This notification will
be sent on the failure of LSP Path Discovery to the
particular PE. Reversal of the failure will also result in
sending the notification.
(b) rttMonLpdGrpStatusNotification - Individual probes in an LPD
group will not generate notifications independently but will
be generating dependent on the state of the group. Any
individual probe can initiate the generation of a
notification, dependent on the state of the group.
Notifications are only generated if the failure/restoration
of an individual probe causes the state of the group to
change.
The Value 'none' will not cause any notifications to be sent.
The Value 'lpdPathDiscovery' will cause (a) to be sent.
The Value 'lpdGroupStatus' will cause (b) to be sent.
The Value 'lpdAll' will cause both (a) and (b) to sent
depending on the failure conditions."
DEFVAL { none }
::= { rttMplsVpnMonReactEntry 6 }
rttMplsVpnMonReactLpdRetryCount OBJECT-TYPE
SYNTAX Integer32 (1..16)
UNITS "attempts"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object value specifies the number of attempts to be
performed before declaring the path as 'down'. Each 'single
probe' which is part of 'lspGroup' probe will be retried these
many times before marking it as 'down'.
This object will be applicable only when LSP Path Discovery is
enabled for this row.
- When rttMplsVpnMonTypeSecFreqType is not configured, the
failure count will be incremented at the next cycle of
'lspGroup' probe at interval's of
rttMplsVpnMonScheduleFrequency value.
For example: Assume there are 10 paths discovered and on
the first run of the 'lspGroup' probe first two paths failed
and rest passed. On the second run all the probes will be
run again. The probes 1 and 2 will be retried till the
rttMplsVpnMonReactLpdRetryCount value, and
then marked as 'down' and rttMonLpdGrpStatusNotification
will be sent if configured.
- When rttMplsVpnMonTypeSecFreqType value is anything other
than 'none', the retry will happen for the failed probes at
the rttMplsVpnMonTypeSecFreqValue and only the failed
probes will be retried.
For example: Assume there are 10 paths discovered and on the
first run of the 'lspGroup' probe first two paths failed and
rest passed. The secondary frequency will be applied to the
failed probes. At secondary frequency interval the first two
probes will be run again. The probes 1 and 2 will be retried
till the rttMplsVpnMonReactLpdRetryCount value, and
then marked as 'down' and rttMonLpdGrpStatusNotification
will be sent if configured."
DEFVAL { 1 }
::= { rttMplsVpnMonReactEntry 7 }
-- A new Reaction Table for the probes.
rttMonReactTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonReactEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the reaction configurations. Each
conceptual row in rttMonReactTable corresponds to a reaction
configured for the probe defined in rttMonCtrlAdminTable.
For each reaction configured for a probe there is an entry in
the table.
Each Probe can have multiple reactions and hence there can be
multiple rows for a particular probe.
This table is coupled with rttMonCtrlAdminTable."
::= { rttMonCtrl 19 }
rttMonReactEntry OBJECT-TYPE
SYNTAX RttMonReactEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A base list of objects that define a conceptual reaction
configuration control row."
INDEX {
rttMonCtrlAdminIndex,
rttMonReactConfigIndex
}
::= { rttMonReactTable 1 }
RttMonReactEntry ::= SEQUENCE {
rttMonReactConfigIndex Integer32,
rttMonReactVar RttMonReactVar,
rttMonReactThresholdType INTEGER,
rttMonReactActionType INTEGER,
rttMonReactThresholdRising Integer32,
rttMonReactThresholdFalling Integer32,
rttMonReactThresholdCountX Integer32,
rttMonReactThresholdCountY Integer32,
rttMonReactValue Integer32,
rttMonReactOccurred TruthValue,
rttMonReactStatus RowStatus
}
rttMonReactConfigIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object along with rttMonCtrlAdminIndex identifies
a particular reaction-configuration for a particular probe.
This is a pseudo-random number selected by the management
station when creating a row via the rttMonReactStatus.
If the pseudo-random number is already in use an
'inconsistentValue' return code will be returned when
set operation is attempted."
::= { rttMonReactEntry 1 }
rttMonReactVar OBJECT-TYPE
SYNTAX RttMonReactVar
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the type of reaction configured for a
probe.
The reaction types 'rtt', 'timeout', and 'connectionLoss'
can be configured for all probe types.
The reaction type 'verifyError' can be configured for all
probe types except RTP probe type.
The reaction types 'jitterSDAvg', 'jitterDSAvg', 'jitterAvg',
'packetLateArrival', 'packetOutOfSequence',
'maxOfPositiveSD', 'maxOfNegativeSD', 'maxOfPositiveDS'
and 'maxOfNegativeDS' can be configured for UDP jitter
and ICMP jitter probe types only.
The reaction types 'mos' and 'icpif' can be configured
for UDP jitter and ICMP jitter probe types only.
The reaction types 'packetLossDS', 'packetLossSD' and
'packetMIA' can be configured for UDP jitter, and
RTP probe types only.
The reaction types 'iaJitterDS', 'frameLossDS', 'mosLQDS',
'mosCQDS', 'rFactorDS', 'iaJitterSD', 'rFactorSD', 'mosCQSD'
can be configured for RTP probe type only.
The reaction types 'successivePacketLoss', 'maxOfLatencyDS',
'maxOfLatencySD', 'latencyDSAvg', 'latencySDAvg' and
'packetLoss' can be configured for ICMP jitter probe
type only."
::= { rttMonReactEntry 2 }
rttMonReactThresholdType OBJECT-TYPE
SYNTAX INTEGER {
never(1),
immediate(2),
consecutive(3),
xOfy(4),
average(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the conditions under which
the notification ( trap ) is sent.
never - rttMonReactOccurred is never set
immediate - rttMonReactOccurred is set to 'true' when the
value of parameter for which reaction is
configured ( e.g rtt, jitterAvg, packetLossSD,
mos etc ) violates the threshold.
Conversely, rttMonReactOccurred is set to 'false'
when the parameter ( e.g rtt, jitterAvg,
packetLossSD, mos etc ) is below the threshold
limits.
consecutive - rttMonReactOccurred is set to true when the value
of parameter for which reaction is configured
( e.g rtt, jitterAvg, packetLossSD, mos etc )
violates the threshold for configured consecutive
times.
Conversely, rttMonReactOccurred is set to false
when the value of parameter ( e.g rtt, jitterAvg
packetLossSD, mos etc ) is below the threshold
limits for the same number of consecutive
operations.
xOfy - rttMonReactOccurred is set to true when x
( as specified by rttMonReactThresholdCountX )
out of the last y ( as specified by
rttMonReacthresholdCountY ) times the value of
parameter for which the reaction is configured
( e.g rtt, jitterAvg, packetLossSD, mos etc )
violates the threshold.
Conversely, it is set to false when x, out of the
last y times the value of parameter
( e.g rtt, jitterAvg, packetLossSD, mos ) is
below the threshold limits.
NOTE: When x > y, the probe will never
generate a reaction.
average - rttMonReactOccurred is set to true when the
average ( rttMonReactThresholdCountX times )
value of parameter for which reaction is
configured ( e.g rtt, jitterAvg, packetLossSD,
mos etc ) violates the threshold condition.
Conversely, it is set to false when the
average value of parameter ( e.g rtt, jitterAvg,
packetLossSD, mos etc ) is below the threshold
limits.
If this value is changed by a management station,
rttMonReactOccurred is set to false, but
no reaction is generated if the prior value of
rttMonReactOccurred was true."
DEFVAL { never }
::= { rttMonReactEntry 3 }
rttMonReactActionType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
trapOnly(2),
triggerOnly(3),
trapAndTrigger(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies what type(s), if any, of reaction(s) to
generate if an operation violates one of the watched
( reaction-configuration ) conditions:
none - no reaction is generated
trapOnly - a trap is generated
triggerOnly - all trigger actions defined for this
entry are initiated
trapAndTrigger - both a trap and all trigger actions
are initiated
A trigger action is defined via the
rttMonReactTriggerAdminTable."
DEFVAL { none }
::= { rttMonReactEntry 4 }
rttMonReactThresholdRising OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines the higher threshold limit.
If the value ( e.g rtt, jitterAvg, packetLossSD etc ) rises
above this limit and if the condition specified in
rttMonReactThresholdType are satisfied, a trap is generated.
Default value of rttMonReactThresholdRising for
'rtt' is 5000
'jitterAvg' is 100.
'jitterSDAvg' is 100.
'jitterDSAvg' 100.
'packetLossSD' is 10000.
'packetLossDS' is 10000.
'mos' is 500.
'icpif' is 93.
'packetMIA' is 10000.
'packetLateArrival' is 10000.
'packetOutOfSequence' is 10000.
'maxOfPositiveSD' is 10000.
'maxOfNegativeSD' is 10000.
'maxOfPositiveDS' is 10000.
'maxOfNegativeDS' is 10000.
'iaJitterDS' is 20.
'frameLossDS' is 10000.
'mosLQDS' is 400.
'mosCQDS' is 400.
'rFactorDS' is 80.
'successivePacketLoss' is 1000.
'maxOfLatencyDS' is 5000.
'maxOfLatencySD' is 5000.
'latencyDSAvg' is 5000.
'latencySDAvg' is 5000.
'packetLoss' is 10000.
This object is not applicable if the rttMonReactVar is
'timeout', 'connectionLoss' or 'verifyError'. For 'timeout',
'connectionLoss' and 'verifyError' default value of
rttMonReactThresholdRising will be 0."
::= { rttMonReactEntry 5 }
rttMonReactThresholdFalling OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines a lower threshold limit. If the
value ( e.g rtt, jitterAvg, packetLossSD etc ) falls
below this limit and if the conditions specified in
rttMonReactThresholdType are satisfied, a trap is generated.
Default value of rttMonReactThresholdFalling
'rtt' is 3000
'jitterAvg' is 100.
'jitterSDAvg' is 100.
'jitterDSAvg' 100.
'packetLossSD' is 10000.
'packetLossDS' is 10000.
'mos' is 500.
'icpif' is 93.
'packetMIA' is 10000.
'packetLateArrival' is 10000.
'packetOutOfSequence' is 10000.
'maxOfPositiveSD' is 10000.
'maxOfNegativeSD' is 10000.
'maxOfPositiveDS' is 10000.
'maxOfNegativeDS' is 10000.
'iaJitterDS' is 20.
'frameLossDS' is 10000.
'mosLQDS' is 310.
'mosCQDS' is 310.
'rFactorDS' is 60.
'successivePacketLoss' is 1000.
'maxOfLatencyDS' is 3000.
'maxOfLatencySD' is 3000.
'latencyDSAvg' is 3000.
'latencySDAvg' is 3000.
'packetLoss' is 10000.
'iaJitterSD' is 20.
'mosCQSD' is 310.
'rFactorSD' is 60.
This object is not applicable if the rttMonReactVar is
'timeout', 'connectionLoss' or 'verifyError'. For 'timeout',
'connectionLoss' and 'verifyError' default value of
rttMonReactThresholdFalling will be 0."
::= { rttMonReactEntry 6 }
rttMonReactThresholdCountX OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If rttMonReactThresholdType value is 'xOfy', this object
defines the 'x' value.
If rttMonReactThresholdType value is 'consecutive'
this object defines the number of consecutive occurrences
that needs threshold violation before setting
rttMonReactOccurred as true.
If rttMonReactThresholdType value is 'average' this object
defines the number of samples that needs be considered for
calculating average.
This object has no meaning if rttMonReactThresholdType has
value of 'never' and 'immediate'."
DEFVAL { 5 }
::= { rttMonReactEntry 7 }
rttMonReactThresholdCountY OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines the 'y' value of the xOfy condition
if rttMonReactThresholdType is 'xOfy'.
For other values of rttMonReactThresholdType, this object
is not applicable."
DEFVAL { 5 }
::= { rttMonReactEntry 8 }
rttMonReactValue OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object will be set when the configured threshold condition
is violated as defined by rttMonReactThresholdType and holds the
actual value that violated the configured threshold values.
This object is not valid for the following values of
rttMonReactVar and It will be always 0:
- timeout
- connectionLoss
- verifyError."
DEFVAL { 0 }
::= { rttMonReactEntry 9 }
rttMonReactOccurred OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is set to true when the configured threshold
condition is violated as defined by rttMonReactThresholdType.
It will be again set to 'false' if the condition reverses.
This object is set to true in the following conditions:
- rttMonReactVar is set to timeout and
rttMonCtrlOperTimeoutOccurred set to true.
- rttMonReactVar is set to connectionLoss and
rttMonCtrlOperConnectionLostOccurred set to true.
- rttMonReactVar is set to verifyError and
rttMonCtrlOperVerifyErrorOccurred is set to true.
- For all other values of rttMonReactVar, if the
corresponding value exceeds the configured
rttMonReactThresholdRising.
This object is set to false in the following conditions:
- rttMonReactVar is set to timeout and
rttMonCtrlOperTimeoutOccurred set to false.
- rttMonReactVar is set to connectionLoss and
rttMonCtrlOperConnectionLostOccurred set to false.
- rttMonReactVar is set to verifyError and
rttMonCtrlOperVerifyErrorOccurred is set to false.
- For all other values of rttMonReactVar, if the
corresponding value fall below the configured
rttMonReactThresholdFalling.
When the RttMonRttType is 'pathEcho' or 'pathJitter',
this object is applied only to the
rttMonEchoAdminTargetAddress and not to intermediate
hops to the Target."
DEFVAL { false }
::= { rttMonReactEntry 10 }
rttMonReactStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This objects indicates the status of the conceptual RTT
Reaction Control Row.Only CreateAndGo and destroy
operations are permitted on the row.
When this object moves to active state, the conceptual row
having the Reaction configuration for the probe is monitored
and the notifications are generated when the threshold violation
takes place.
In order for this object to become active rttMonReactVar must
be defined. All other objects assume the default value.
This object can be set to 'destroy' from any value at any time.
When this object is set to 'destroy' no reaction configuration
for the probes would exist. The reaction configuration for the
probe is removed."
::= { rttMonReactEntry 11 }
-- Generated Oper Table
rttMonGeneratedOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonGeneratedOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the generated
operation id as part of a parent IP SLA operation. The parent
operation id is pseudo-random number, selected by the management
station based on an operation started by the management
station,when creating a row via the rttMonCtrlAdminStatus
object in the rttMonCtrlAdminTable table."
::= { rttMonCtrl 20 }
rttMonGeneratedOperEntry OBJECT-TYPE
SYNTAX RttMonGeneratedOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the Generated Oper table corresponding to
a child or generated operation as part of a parent
IP SLA operation."
INDEX {
rttMonCtrlAdminIndex,
rttMonGeneratedOperRespIpAddrType,
rttMonGeneratedOperRespIpAddr
}
::= { rttMonGeneratedOperTable 1 }
RttMonGeneratedOperEntry ::= SEQUENCE {
rttMonGeneratedOperRespIpAddrType InetAddressType,
rttMonGeneratedOperRespIpAddr InetAddress,
rttMonGeneratedOperCtrlAdminIndex Unsigned32
}
rttMonGeneratedOperRespIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of Internet address, IPv4 or IPv6, of a responder
for an IP SLA operation."
::= { rttMonGeneratedOperEntry 1 }
rttMonGeneratedOperRespIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The internet address of a responder for IP SLA
operation. The type of this address is determined
by the value of rttMonGeneratedOperRespIpAddrType."
::= { rttMonGeneratedOperEntry 2 }
rttMonGeneratedOperCtrlAdminIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a pseudo-random number, auto-generated based
to identify a child operation based on a parent
operation started by the management station,when
creating a row via the rttMonCtrlAdminStatus
object."
::= { rttMonGeneratedOperEntry 3 }
-- Statistics Capture Table
rttMonStatsCaptureTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonStatsCaptureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The statistics capture database.
The statistics capture table contains summarized
information of the results for a conceptual RTT control
row. A rolling accumulated history of this information
is maintained in a series of hourly 'group(s)'. Each
'group' contains a series of 'path(s)', each 'path'
contains a series of 'hop(s)', each 'hop' contains a
series of 'statistics distribution bucket(s)'.
Each conceptual statistics row has a current hourly
group, into which RTT results are accumulated. At the
end of each hour a new hourly group is created which
then becomes current. The counters and accumulators in
the new group are initialized to zero. The previous
group(s) is kept in the table until the table contains
rttMonStatisticsAdminNumHourGroups groups for the
conceptual statistics row; at this point, the oldest
group is discarded and is replaced by the newly created
one. The hourly group is uniquely identified by the
rttMonStatsCaptureStartTimeIndex object.
If the activity for a conceptual RTT control row ceases
because the rttMonCtrlOperState object transitions to
'inactive', the corresponding current hourly group in
this table is 'frozen', and a new hourly group is
created when activity is resumed.
If the activity for a conceptual RTT control row ceases
because the rttMonCtrlOperState object transitions to
'pending' this whole table will be cleared and reset to
its initial state.
When the RttMonRttType is 'pathEcho', the path
exploration RTT requests' statistics will not be
accumulated in this table.
NOTE: When the RttMonRttType is 'pathEcho', a source to
target rttMonStatsCapturePathIndex path will be
created for each rttMonStatsCaptureStartTimeIndex
to hold all errors that occur when a specific path
had not been found or connection has not be setup.
Using this rttMonStatsCaptureTable, a managing
application can retrieve summarized data from accurately
measured periods, which is synchronized across multiple
conceptual RTT control rows. With the new hourly group
creation being performed on a 60 minute period, the
managing station has plenty of time to collect the data,
and need not be concerned with the vagaries of network
delays and lost PDU's when trying to get matching data.
Also, the managing station can spread the data gathering
over a longer period, which removes the need for a flood
of get requests in a short period which otherwise would
occur."
::= { rttMonStats 1 }
rttMonStatsCaptureEntry OBJECT-TYPE
SYNTAX RttMonStatsCaptureEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects which accumulate the results of a
series of RTT operations over a 60 minute time period.
The statistics capture table is a rollover table. When
rttMonStatsCaptureStartTimeIndex groups exceeds the
rttMonStatisticsAdminNumHourGroups value, the oldest
corresponding hourly group will be deleted and will be
replaced with the new rttMonStatsCaptureStartTimeIndex
hourly group.
All other indices will fill to there maximum size.
The statistics capture table has five indices. Each
described as follows:
- The first index correlates its entries to a
conceptual RTT control row via the
rttMonCtrlAdminIndex object.
- The second index is a rollover group and it
uniquely identifies a 60 minute group. (The
rttMonStatsCaptureStartTimeIndex object
is used to make this value unique.)
- When the RttMonRttType is 'pathEcho', the third
index uniquely identifies the paths in a
statistics period. (The period is 60
minutes.) A path will be created for each
unique path through the network. Note: A
path that does not contain the target is
considered a different path than one which
uses the exact same path, but does contain the
target. For all other values of RttMonRttType
this index will be one.
- When the RttMonRttType is 'pathEcho', the fourth
index uniquely identifies the hops in each path,
as grouped by the third index. This index does
imply the order of the hops along the path to a
target. For all other values of RttMonRttType
this index will be one.
- The fifth index uniquely creates a statistical
distribution bucket."
INDEX {
rttMonCtrlAdminIndex,
rttMonStatsCaptureStartTimeIndex,
rttMonStatsCapturePathIndex,
rttMonStatsCaptureHopIndex,
rttMonStatsCaptureDistIndex
}
::= { rttMonStatsCaptureTable 1 }
RttMonStatsCaptureEntry ::= SEQUENCE {
rttMonStatsCaptureStartTimeIndex TimeStamp,
rttMonStatsCapturePathIndex Integer32,
rttMonStatsCaptureHopIndex Integer32,
rttMonStatsCaptureDistIndex Integer32,
rttMonStatsCaptureCompletions Integer32,
rttMonStatsCaptureOverThresholds Integer32,
rttMonStatsCaptureSumCompletionTime Gauge32,
rttMonStatsCaptureSumCompletionTime2Low Gauge32,
rttMonStatsCaptureSumCompletionTime2High Gauge32,
rttMonStatsCaptureCompletionTimeMax Gauge32,
rttMonStatsCaptureCompletionTimeMin Gauge32
}
rttMonStatsCaptureStartTimeIndex OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The time when this row was created.
This object is the second index of the
rttMonStatsCaptureTable Table.
The the number of rttMonStatsCaptureStartTimeIndex
groups exceeds the rttMonStatisticsAdminNumHourGroups
value, the oldest rttMonStatsCaptureStartTimeIndex
group will be removed and replaced with the new entry.
When the RttMonRttType is 'pathEcho', this object also
uniquely defines a group of paths. See the
rttMonStatsCaptureEntry object."
::= { rttMonStatsCaptureEntry 1 }
rttMonStatsCapturePathIndex OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When the RttMonRttType is 'pathEcho', this object
uniquely defines a path for a given value of
rttMonStatsCaptureStartTimeIndex. For all other values
of RttMonRttType, this object will be one.
For a particular value of
rttMonStatsCaptureStartTimeIndex, the agent assigns the
first instance of a path a value of 1, then second
instance a value of 2, and so on. The sequence keeps
incrementing until the number of paths equals
rttMonStatisticsAdminNumPaths value, then no new paths
are kept for the current rttMonStatsCaptureStartTimeIndex
group.
NOTE: A source to target rttMonStatsCapturePathIndex
path will be created for each
rttMonStatsCaptureStartTimeIndex to hold all
errors that occur when a specific path or
connection has not be setup.
This value directly represents the path to
a target. We can only support 128 paths."
::= { rttMonStatsCaptureEntry 2 }
rttMonStatsCaptureHopIndex OBJECT-TYPE
SYNTAX Integer32 (1..30)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When the RttMonRttType is 'pathEcho', this object
uniquely defines a hop for a given value of
rttMonStatsCapturePathIndex. For all other values of
RttMonRttType, this object will be one.
For a particular value of rttMonStatsCapturePathIndex,
the agent assigns the first instance of a hop
a value of 1, then second instance a value of 2, and so
on. The sequence keeps incrementing until the number of
hops equals rttMonStatisticsAdminNumHops value, then
no new hops are kept for the current
rttMonStatsCapturePathIndex.
This value directly represents a hop along the path to
a target, thus we can only support 30 hops.
This value shows the order along the path to a target."
::= { rttMonStatsCaptureEntry 3 }
rttMonStatsCaptureDistIndex OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely defines a statistical distribution
bucket for a given value of rttMonStatsCaptureHopIndex.
For a particular value of rttMonStatsCaptureHopIndex,
the agent assigns the first instance of a distribution
a value of 1, then second instance a value of 2, and so
on. The sequence keeps incrementing until the number of
statistics distribution intervals equals
rttMonStatisticsAdminNumDistBuckets value, then
all values that fall above the last interval will
be placed into the last interval.
Each of these Statistics Distribution Buckets contain
the results of each completion as defined by
rttMonStatisticsAdminDistInterval object."
::= { rttMonStatsCaptureEntry 4 }
rttMonStatsCaptureCompletions OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RTT operations that have completed without
an error and without timing out.
This object has the special behavior as defined by the
ROLLOVER NOTE in the DESCRIPTION of the ciscoRttMonMIB
object."
::= { rttMonStatsCaptureEntry 5 }
rttMonStatsCaptureOverThresholds OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RTT operations successfully completed, but
in excess of rttMonCtrlAdminThreshold. This number is a
subset of the accumulation of all
rttMonStatsCaptureCompletions. The operation time
of these completed operations will be accumulated.
This object has the special behavior as defined by the
ROLLOVER NOTE in the DESCRIPTION of the ciscoRttMonMIB
object."
::= { rttMonStatsCaptureEntry 6 }
rttMonStatsCaptureSumCompletionTime OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The accumulated completion time of RTT operations which
complete successfully."
::= { rttMonStatsCaptureEntry 7 }
rttMonStatsCaptureSumCompletionTime2Low OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The low order 32 bits of the accumulated squares
of completion times (in milliseconds) of RTT
operations which complete successfully.
Low/High order is defined where the binary number
will look as follows:
-------------------------------------------------
| High order 32 bits | Low order 32 bits |
-------------------------------------------------
For example the number 4294967296 would have all
Low order bits as '0' and the rightmost High
order bit will be 1 (zeros,1)."
::= { rttMonStatsCaptureEntry 8 }
rttMonStatsCaptureSumCompletionTime2High OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The high order 32 bits of the accumulated squares
of completion times (in milliseconds) of RTT
operations which complete successfully.
See the rttMonStatsCaptureSumCompletionTime2Low object
for a definition of Low/High Order."
::= { rttMonStatsCaptureEntry 9 }
rttMonStatsCaptureCompletionTimeMax OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum completion time of any RTT operation which
completes successfully."
::= { rttMonStatsCaptureEntry 10 }
rttMonStatsCaptureCompletionTimeMin OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum completion time of any RTT operation which
completes successfully."
::= { rttMonStatsCaptureEntry 11 }
-- Statistics Collection Table
rttMonStatsCollectTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonStatsCollectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The statistics collection database.
This table has the exact same behavior as the
rttMonStatsCaptureTable, except it does not keep
statistical distribution information.
For a complete table description see
the rttMonStatsCaptureTable object."
::= { rttMonStats 2 }
rttMonStatsCollectEntry OBJECT-TYPE
SYNTAX RttMonStatsCollectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects which accumulate the results of a
series of RTT operations over a 60 minute time period.
This entry has the exact same behavior as the
rttMonStatsCaptureEntry, except it does not keep
statistical distribution information.
For a complete entry description see
the rttMonStatsCaptureEntry object."
INDEX {
rttMonCtrlAdminIndex,
rttMonStatsCaptureStartTimeIndex,
rttMonStatsCapturePathIndex,
rttMonStatsCaptureHopIndex
}
::= { rttMonStatsCollectTable 1 }
RttMonStatsCollectEntry ::= SEQUENCE {
rttMonStatsCollectNumDisconnects Integer32,
rttMonStatsCollectTimeouts Integer32,
rttMonStatsCollectBusies Integer32,
rttMonStatsCollectNoConnections Integer32,
rttMonStatsCollectDrops Integer32,
rttMonStatsCollectSequenceErrors Integer32,
rttMonStatsCollectVerifyErrors Integer32,
rttMonStatsCollectAddress RttMonTargetAddress,
rttMonControlEnableErrors Integer32,
rttMonStatsRetrieveErrors Integer32,
rttMonStatsCollectCtrlEnErrors Integer32,
rttMonStatsCollectRetrieveErrors Integer32
}
rttMonStatsCollectNumDisconnects OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the RttMonRttType is 'echo' or pathEcho', this
object represents the number of times that the target or
hop along the path to a target became disconnected. For
all other values of RttMonRttType, this object will
remain zero.
For connectionless protocols this has no meaning,
and will consequently remain 0. When
rttMonEchoAdminProtocol is one of snaRUEcho, this is
the number of times that an LU-SSCP session was lost,
for snaLU0EchoAppl, snaLU2EchoAppl, snaLu62Echo, and for
snaLU62EchoAppl, this is the number of times that LU-LU
session was lost.
Since this error does not indicate any information about
the failure of an RTT operation, no response time
information for this instance will be recorded in the
appropriate objects.
If this error occurs and the rttMonStatsCapturePathIndex
cannot be determined, this error will be accumulated in
the source to target path, that will always exist.
This object has the special behavior as defined by the
ROLLOVER NOTE in the DESCRIPTION of the ciscoRttMonMIB
object."
::= { rttMonStatsCollectEntry 1 }
rttMonStatsCollectTimeouts OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a RTT operation was not
completed before a timeout occurred, i.e.
rttMonCtrlAdminTimeout was exceeded.
Since the RTT operation was never completed, the
completion time of these operations are not accumulated,
nor do they increment rttMonStatsCaptureCompletions (in
any of the statistics distribution buckets).
This object has the special behavior as defined by the
ROLLOVER NOTE in the DESCRIPTION of the ciscoRttMonMIB
object."
::= { rttMonStatsCollectEntry 2 }
rttMonStatsCollectBusies OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a RTT operation could not
be initiated because a previous RTT operation has not
been completed.
When the RttMonRttType is 'pathEcho' this can occur for
both connection oriented protocols and connectionless
protocols.
When the RttMonRttType is 'echo' this can only occur for
connection oriented protocols such as SNA.
When the initiation of a new operation cannot be started,
this object will be incremented and the operation will be
omitted. (The next operation will start at the next
Frequency). Since, a RTT operation was never initiated,
the completion time of these operations is not
accumulated, nor do they increment
rttMonStatsCaptureCompletions.
When the RttMonRttType is 'pathEcho', and this error
occurs and the rttMonStatsCapturePathIndex cannot be
determined, this error will be accumulated in the source
to target path, that will always exist.
This object has the special behavior as defined by the
ROLLOVER NOTE in the DESCRIPTION of the ciscoRttMonMIB
object."
::= { rttMonStatsCollectEntry 3 }
rttMonStatsCollectNoConnections OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the RttMonRttType is 'echo' or 'pathEcho' this is
the number of occasions when a RTT operation could not be
initiated because the connection to the target has not
been established. For all other RttMonRttTypes this
object will remain zero.
This cannot occur for connectionless protocols, but may
occur for connection oriented protocols, such as SNA.
Since a RTT operation was never initiated, the completion
time of these operations are not accumulated, nor do they
increment rttMonStatsCaptureCompletions.
If this error occurs and the rttMonStatsCapturePathIndex
cannot be determined, this error will be accumulated
in the source to target path, that will always exist.
This object has the special behavior as defined by the
ROLLOVER NOTE in the DESCRIPTION of the ciscoRttMonMIB
object."
::= { rttMonStatsCollectEntry 4 }
rttMonStatsCollectDrops OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a RTT operation could not
be initiated because some necessary internal resource
(for example memory, or SNA subsystem) was not available,
or the operation completion could not be recognized.
Since a RTT operation was never initiated or was not
recognized, the completion time of these operations
are not accumulated, nor do they increment
rttMonStatsCaptureCompletions (in the expected
Distribution Bucket).
When the RttMonRttType is 'pathEcho', and this error
occurs and the rttMonStatsCapturePathIndex cannot be
determined, this error will be accumulated in the
source to target path, that will always exist.
This object has the special behavior as defined by the
ROLLOVER NOTE in the DESCRIPTION of the ciscoRttMonMIB
object."
::= { rttMonStatsCollectEntry 5 }
rttMonStatsCollectSequenceErrors OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the RttMonRttType is 'echo' of 'pathEcho' this is
the number of RTT operation completions received with
an unexpected sequence identifier. For all other values
of RttMonRttType this object will remain zero.
When this has occurred some of the possible reasons may
be:
- a duplicate packet was received
- a response was received after it had timed-out
- a corrupted packet was received and was not detected
The completion time of these operations are not
accumulated, nor do they increment
rttMonStatsCaptureCompletions (in the expected
Distribution Bucket).
This object has the special behavior as defined by the
ROLLOVER NOTE in the DESCRIPTION of the ciscoRttMonMIB
object."
::= { rttMonStatsCollectEntry 6 }
rttMonStatsCollectVerifyErrors OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RTT operation completions received with
data that does not compare with the expected data. The
completion time of these operations are not accumulated,
nor do they increment rttMonStatsCaptureCompletions (in
the expected Distribution Bucket).
This object has the special behavior as defined by the
ROLLOVER NOTE in the DESCRIPTION of the ciscoRttMonMIB
object."
::= { rttMonStatsCollectEntry 7 }
rttMonStatsCollectAddress OBJECT-TYPE
SYNTAX RttMonTargetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object only applies when the RttMonRttType is
'echo', 'pathEcho', 'dlsw', 'udpEcho', 'tcpConnect'.
For all other values of the RttMonRttType, this will be
null.
The object is a string which specifies the address of
the target for the this RTT operation.
This address will be the address of the hop along the
path to the rttMonEchoAdminTargetAddress address,
including rttMonEchoAdminTargetAddress address, or just
the rttMonEchoAdminTargetAddress address, when the
path information is not collected. This behavior is
defined by the rttMonCtrlAdminRttType object.
The interpretation of this string depends on the type
of RTT operation selected, as specified by the
rttMonEchoAdminProtocol object."
::= { rttMonStatsCollectEntry 8 }
rttMonControlEnableErrors OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of occasions when control enable request failed.
Currently it is used for multicast operation type.
This object has the special behavior as defined by the
ROLLOVER NOTE in the DESCRIPTION of the ciscoRttMonMIB
object.
rttMonControlEnableErrors object is superseded by
rttMonStatsCollectCtrlEnErrors."
::= { rttMonStatsCollectEntry 9 }
rttMonStatsRetrieveErrors OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of occasions when stats retrieval request failed.
Currently it is used for multicast operation type.
This object has the special behavior as defined by the
ROLLOVER NOTE in the DESCRIPTION of the ciscoRttMonMIB
object.
rttMonStatsRetrieveErrors object is superseded by
rttMonStatsCollectRetrieveErrors."
::= { rttMonStatsCollectEntry 10 }
rttMonStatsCollectCtrlEnErrors OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object is same as rttMonControlEnableErrors,
with corrected name for consistency.
The number of occasions when control enable request failed.
Currently it is used for multicast operation type.
This object has the special behavior as defined by the
ROLLOVER NOTE in the DESCRIPTION of the ciscoRttMonMIB
object."
::= { rttMonStatsCollectEntry 11 }
rttMonStatsCollectRetrieveErrors OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object is same as rttMonStatsRetrieveErrors,
with corrected name for consistency.
The number of occasions when stats retrieval request failed.
Currently it is used for multicast operation type.
This object has the special behavior as defined by the
ROLLOVER NOTE in the DESCRIPTION of the ciscoRttMonMIB
object."
::= { rttMonStatsCollectEntry 12 }
-- Statistics Totals Table
rttMonStatsTotalsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonStatsTotalsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The statistics totals database.
This table has the exact same behavior as the
rttMonStatsCaptureTable, except it only keeps
60 minute group values.
For a complete table description see
the rttMonStatsCaptureTable object."
::= { rttMonStats 3 }
rttMonStatsTotalsEntry OBJECT-TYPE
SYNTAX RttMonStatsTotalsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects which accumulate the results of a
series of RTT operations over a 60 minute time period.
This entry has the exact same behavior as the
rttMonStatsCaptureEntry, except it only keeps
60 minute group values.
For a complete entry description see
the rttMonStatsCaptureEntry object."
INDEX {
rttMonCtrlAdminIndex,
rttMonStatsCaptureStartTimeIndex
}
::= { rttMonStatsTotalsTable 1 }
RttMonStatsTotalsEntry ::= SEQUENCE {
rttMonStatsTotalsElapsedTime TimeInterval,
rttMonStatsTotalsInitiations Integer32
}
rttMonStatsTotalsElapsedTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of time since this conceptual statistics row
was created."
::= { rttMonStatsTotalsEntry 1 }
rttMonStatsTotalsInitiations OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RTT operations that have been initiated.
This number includes all RTT operations which succeed
or fail for whatever reason.
This object has the special behavior as defined by the
ROLLOVER NOTE in the DESCRIPTION of the ciscoRttMonMIB
object."
::= { rttMonStatsTotalsEntry 2 }
-- HTTP Statistics Table
rttMonHTTPStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonHTTPStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The HTTP statistics collection database.
The HTTP statistics table contains summarized information of
the results for a conceptual RTT control row. A rolling
accumulated history of this information is maintained in a
series of hourly 'group(s)'.
The operation of this table is same as that of
rttMonStatsCaptureTable, except that this table can only
store a maximum of 2 hours of data."
::= { rttMonStats 4 }
rttMonHTTPStatsEntry OBJECT-TYPE
SYNTAX RttMonHTTPStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects which accumulate the results of a
series of RTT operations over a 60 minute time period.
This entry is created only if the rttMonCtrlAdminRttType
is http. The operation of this table is same as that of
rttMonStatsCaptureTable."
INDEX {
rttMonCtrlAdminIndex,
rttMonHTTPStatsStartTimeIndex
}
::= { rttMonHTTPStatsTable 1 }
RttMonHTTPStatsEntry ::= SEQUENCE {
rttMonHTTPStatsStartTimeIndex TimeStamp,
rttMonHTTPStatsCompletions Counter32,
rttMonHTTPStatsOverThresholds Counter32,
rttMonHTTPStatsRTTSum Counter32,
rttMonHTTPStatsRTTSum2Low Counter32,
rttMonHTTPStatsRTTSum2High Counter32,
rttMonHTTPStatsRTTMin Gauge32,
rttMonHTTPStatsRTTMax Gauge32,
rttMonHTTPStatsDNSRTTSum Counter32,
rttMonHTTPStatsTCPConnectRTTSum Counter32,
rttMonHTTPStatsTransactionRTTSum Counter32,
rttMonHTTPStatsMessageBodyOctetsSum Counter32,
rttMonHTTPStatsDNSServerTimeout Counter32,
rttMonHTTPStatsTCPConnectTimeout Counter32,
rttMonHTTPStatsTransactionTimeout Counter32,
rttMonHTTPStatsDNSQueryError Counter32,
rttMonHTTPStatsHTTPError Counter32,
rttMonHTTPStatsError Counter32,
rttMonHTTPStatsBusies Counter32
}
rttMonHTTPStatsStartTimeIndex OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the time when this row was created. This index
uniquely identifies a HTTP Stats row in the
rttMonHTTPStatsTable."
::= { rttMonHTTPStatsEntry 1 }
rttMonHTTPStatsCompletions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of HTTP operations that have completed
successfully."
::= { rttMonHTTPStatsEntry 2 }
rttMonHTTPStatsOverThresholds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of HTTP operations that violate threshold."
::= { rttMonHTTPStatsEntry 3 }
rttMonHTTPStatsRTTSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of HTTP operations that are successfully measured."
::= { rttMonHTTPStatsEntry 4 }
rttMonHTTPStatsRTTSum2Low OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of the RTT's that are successfully
measured (low order 32 bits)."
::= { rttMonHTTPStatsEntry 5 }
rttMonHTTPStatsRTTSum2High OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of the RTT's that are successfully
measured (high order 32 bits)."
::= { rttMonHTTPStatsEntry 6 }
rttMonHTTPStatsRTTMin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum RTT taken to perform HTTP operation."
::= { rttMonHTTPStatsEntry 7 }
rttMonHTTPStatsRTTMax OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum RTT taken to perform HTTP operation."
::= { rttMonHTTPStatsEntry 8 }
rttMonHTTPStatsDNSRTTSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTT taken to perform DNS query within the
HTTP operation."
::= { rttMonHTTPStatsEntry 9 }
rttMonHTTPStatsTCPConnectRTTSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTT taken to connect to the HTTP server."
::= { rttMonHTTPStatsEntry 10 }
rttMonHTTPStatsTransactionRTTSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTT taken to download the object specified by URL."
::= { rttMonHTTPStatsEntry 11 }
rttMonHTTPStatsMessageBodyOctetsSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of the size of the message body received as a
response to the HTTP request."
::= { rttMonHTTPStatsEntry 12 }
rttMonHTTPStatsDNSServerTimeout OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that could not connect to the
DNS Server."
::= { rttMonHTTPStatsEntry 13 }
rttMonHTTPStatsTCPConnectTimeout OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that could not connect to the
the HTTP Server."
::= { rttMonHTTPStatsEntry 14 }
rttMonHTTPStatsTransactionTimeout OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that timed out during HTTP
transaction."
::= { rttMonHTTPStatsEntry 15 }
rttMonHTTPStatsDNSQueryError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that had DNS Query errors."
::= { rttMonHTTPStatsEntry 16 }
rttMonHTTPStatsHTTPError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of requests that had HTTP errors while
downloading the base page."
::= { rttMonHTTPStatsEntry 17 }
rttMonHTTPStatsError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a HTTP operation could not
be initiated because an internal error"
::= { rttMonHTTPStatsEntry 18 }
rttMonHTTPStatsBusies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when an HTTP operation could not
be initiated because a previous HTTP operation has not
been completed."
::= { rttMonHTTPStatsEntry 19 }
-- Jitter Statistics Table
rttMonJitterStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonJitterStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Jitter statistics collection database.
The Jitter statistics table contains summarized information of
the results for a conceptual RTT control row. A rolling
accumulated history of this information is maintained in a
series of hourly 'group(s)'.
The operation of this table is same as that of
rttMonStatsCaptureTable, except that this table will store
2 hours of data."
::= { rttMonStats 5 }
rttMonJitterStatsEntry OBJECT-TYPE
SYNTAX RttMonJitterStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects which accumulate the results of a
series of RTT operations over a 60 minute time period.
This entry is created only if the rttMonCtrlAdminRttType
is jitter. The operation of this table is same as that of
rttMonStatsCaptureTable."
INDEX {
rttMonCtrlAdminIndex,
rttMonJitterStatsStartTimeIndex
}
::= { rttMonJitterStatsTable 1 }
RttMonJitterStatsEntry ::= SEQUENCE {
rttMonJitterStatsStartTimeIndex TimeStamp,
rttMonJitterStatsCompletions Counter32,
rttMonJitterStatsOverThresholds Counter32,
rttMonJitterStatsNumOfRTT Counter32,
rttMonJitterStatsRTTSum Counter32,
rttMonJitterStatsRTTSum2Low Counter32,
rttMonJitterStatsRTTSum2High Counter32,
rttMonJitterStatsRTTMin Gauge32,
rttMonJitterStatsRTTMax Gauge32,
rttMonJitterStatsMinOfPositivesSD Gauge32,
rttMonJitterStatsMaxOfPositivesSD Gauge32,
rttMonJitterStatsNumOfPositivesSD Counter32,
rttMonJitterStatsSumOfPositivesSD Counter32,
rttMonJitterStatsSum2PositivesSDLow Counter32,
rttMonJitterStatsSum2PositivesSDHigh Counter32,
rttMonJitterStatsMinOfNegativesSD Gauge32,
rttMonJitterStatsMaxOfNegativesSD Gauge32,
rttMonJitterStatsNumOfNegativesSD Counter32,
rttMonJitterStatsSumOfNegativesSD Counter32,
rttMonJitterStatsSum2NegativesSDLow Counter32,
rttMonJitterStatsSum2NegativesSDHigh Counter32,
rttMonJitterStatsMinOfPositivesDS Gauge32,
rttMonJitterStatsMaxOfPositivesDS Gauge32,
rttMonJitterStatsNumOfPositivesDS Counter32,
rttMonJitterStatsSumOfPositivesDS Counter32,
rttMonJitterStatsSum2PositivesDSLow Counter32,
rttMonJitterStatsSum2PositivesDSHigh Counter32,
rttMonJitterStatsMinOfNegativesDS Gauge32,
rttMonJitterStatsMaxOfNegativesDS Gauge32,
rttMonJitterStatsNumOfNegativesDS Counter32,
rttMonJitterStatsSumOfNegativesDS Counter32,
rttMonJitterStatsSum2NegativesDSLow Counter32,
rttMonJitterStatsSum2NegativesDSHigh Counter32,
rttMonJitterStatsPacketLossSD Counter32,
rttMonJitterStatsPacketLossDS Counter32,
rttMonJitterStatsPacketOutOfSequence Counter32,
rttMonJitterStatsPacketMIA Counter32,
rttMonJitterStatsPacketLateArrival Counter32,
rttMonJitterStatsError Counter32,
rttMonJitterStatsBusies Counter32,
rttMonJitterStatsOWSumSD Counter32,
rttMonJitterStatsOWSum2SDLow Counter32,
rttMonJitterStatsOWSum2SDHigh Counter32,
rttMonJitterStatsOWMinSD Counter32,
rttMonJitterStatsOWMaxSD Counter32,
rttMonJitterStatsOWSumDS Counter32,
rttMonJitterStatsOWSum2DSLow Counter32,
rttMonJitterStatsOWSum2DSHigh Counter32,
rttMonJitterStatsOWMinDS Counter32,
rttMonJitterStatsOWMaxDS Counter32,
rttMonJitterStatsNumOfOW Counter32,
rttMonJitterStatsOWMinSDNew Gauge32,
rttMonJitterStatsOWMaxSDNew Gauge32,
rttMonJitterStatsOWMinDSNew Gauge32,
rttMonJitterStatsOWMaxDSNew Gauge32,
rttMonJitterStatsMinOfMOS Gauge32,
rttMonJitterStatsMaxOfMOS Gauge32,
rttMonJitterStatsMinOfICPIF Gauge32,
rttMonJitterStatsMaxOfICPIF Gauge32,
rttMonJitterStatsIAJOut Gauge32,
rttMonJitterStatsIAJIn Gauge32,
rttMonJitterStatsAvgJitter Gauge32,
rttMonJitterStatsAvgJitterSD Gauge32,
rttMonJitterStatsAvgJitterDS Gauge32,
rttMonJitterStatsUnSyncRTs Counter32,
rttMonJitterStatsRTTSumHigh Counter32,
rttMonJitterStatsOWSumSDHigh Counter32,
rttMonJitterStatsOWSumDSHigh Counter32,
rttMonJitterStatsNumOverThresh Counter32
}
rttMonJitterStatsStartTimeIndex OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The time when this row was created."
::= { rttMonJitterStatsEntry 1 }
rttMonJitterStatsCompletions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of jitter operation that have completed
successfully."
::= { rttMonJitterStatsEntry 2 }
rttMonJitterStatsOverThresholds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of jitter operations that violate threshold."
::= { rttMonJitterStatsEntry 3 }
rttMonJitterStatsNumOfRTT OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RTT's that are successfully measured."
::= { rttMonJitterStatsEntry 4 }
rttMonJitterStatsRTTSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTT's that are successfully measured (low order 32
bits). The high order 32 bits are stored in
rttMonJitterStatsRTTSumHigh."
::= { rttMonJitterStatsEntry 5 }
rttMonJitterStatsRTTSum2Low OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTT's that are successfully measured
(low order 32 bits)."
::= { rttMonJitterStatsEntry 6 }
rttMonJitterStatsRTTSum2High OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTT's that are successfully measured
(high order 32 bits)."
::= { rttMonJitterStatsEntry 7 }
rttMonJitterStatsRTTMin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of RTT's that were successfully measured"
::= { rttMonJitterStatsEntry 8 }
rttMonJitterStatsRTTMax OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of RTT's that were successfully measured"
::= { rttMonJitterStatsEntry 9 }
rttMonJitterStatsMinOfPositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of absolute values of all positive jitter values
from packets sent from source to destination."
::= { rttMonJitterStatsEntry 10 }
rttMonJitterStatsMaxOfPositivesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of absolute values of all positive jitter values
from packets sent from source to destination."
::= { rttMonJitterStatsEntry 11 }
rttMonJitterStatsNumOfPositivesSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of number of all positive jitter values from packets
sent from source to destination."
::= { rttMonJitterStatsEntry 12 }
rttMonJitterStatsSumOfPositivesSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all positive jitter values from packets
sent from source to destination."
::= { rttMonJitterStatsEntry 13 }
rttMonJitterStatsSum2PositivesSDLow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of RTT's of all positive jitter values from
packets sent from source to destination (low order 32 bits)."
::= { rttMonJitterStatsEntry 14 }
rttMonJitterStatsSum2PositivesSDHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of RTT's of all positive jitter values from
packets sent from source to destination (high order 32 bits)."
::= { rttMonJitterStatsEntry 15 }
rttMonJitterStatsMinOfNegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all negative jitter values from packets sent
from source to destination."
::= { rttMonJitterStatsEntry 16 }
rttMonJitterStatsMaxOfNegativesSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all negative jitter values from packets sent
from source to destination."
::= { rttMonJitterStatsEntry 17 }
rttMonJitterStatsNumOfNegativesSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of number of all negative jitter values from packets
sent from source to destination."
::= { rttMonJitterStatsEntry 18 }
rttMonJitterStatsSumOfNegativesSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTT's of all negative jitter values from packets
sent from source to destination."
::= { rttMonJitterStatsEntry 19 }
rttMonJitterStatsSum2NegativesSDLow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of RTT's of all negative jitter values from
packets sent from source to destination (low order 32 bits)."
::= { rttMonJitterStatsEntry 20 }
rttMonJitterStatsSum2NegativesSDHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of RTT's of all negative jitter values from
packets sent from source to destination (high order 32 bits)."
::= { rttMonJitterStatsEntry 21 }
rttMonJitterStatsMinOfPositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all positive jitter values from packets sent
from destination to source."
::= { rttMonJitterStatsEntry 22 }
rttMonJitterStatsMaxOfPositivesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all positive jitter values from packets sent
from destination to source."
::= { rttMonJitterStatsEntry 23 }
rttMonJitterStatsNumOfPositivesDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of number of all positive jitter values from packets
sent from destination to source."
::= { rttMonJitterStatsEntry 24 }
rttMonJitterStatsSumOfPositivesDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTT's of all positive jitter values from packets
sent from destination to source."
::= { rttMonJitterStatsEntry 25 }
rttMonJitterStatsSum2PositivesDSLow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTT's of all positive jitter values from
packets sent from destination to source (low order 32 bits)."
::= { rttMonJitterStatsEntry 26 }
rttMonJitterStatsSum2PositivesDSHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTT's of all positive jitter values from
packets sent from destination to source (high order 32 bits)."
::= { rttMonJitterStatsEntry 27 }
rttMonJitterStatsMinOfNegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all negative jitter values from packets sent
from destination to source."
::= { rttMonJitterStatsEntry 28 }
rttMonJitterStatsMaxOfNegativesDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all negative jitter values from packets sent
from destination to source."
::= { rttMonJitterStatsEntry 29 }
rttMonJitterStatsNumOfNegativesDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of number of all negative jitter values from packets
sent from destination to source."
::= { rttMonJitterStatsEntry 30 }
rttMonJitterStatsSumOfNegativesDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTT's of all negative jitter values from packets
sent from destination to source."
::= { rttMonJitterStatsEntry 31 }
rttMonJitterStatsSum2NegativesDSLow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTT's of all negative jitter values from
packets sent from destination to source (low order 32 bits)."
::= { rttMonJitterStatsEntry 32 }
rttMonJitterStatsSum2NegativesDSHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTT's of all negative jitter values from
packets sent from destination to source (high order 32 bits)."
::= { rttMonJitterStatsEntry 33 }
rttMonJitterStatsPacketLossSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets lost when sent from source to
destination."
::= { rttMonJitterStatsEntry 34 }
rttMonJitterStatsPacketLossDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets lost when sent from destination to
source."
::= { rttMonJitterStatsEntry 35 }
rttMonJitterStatsPacketOutOfSequence OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets arrived out of sequence."
::= { rttMonJitterStatsEntry 36 }
rttMonJitterStatsPacketMIA OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that are lost for which we cannot
determine the direction."
::= { rttMonJitterStatsEntry 37 }
rttMonJitterStatsPacketLateArrival OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that arrived after the timeout."
::= { rttMonJitterStatsEntry 38 }
rttMonJitterStatsError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a jitter operation could not
be initiated because an internal error"
::= { rttMonJitterStatsEntry 39 }
rttMonJitterStatsBusies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a jitter operation could not
be initiated because a previous jitter operation has not
been completed."
::= { rttMonJitterStatsEntry 40 }
rttMonJitterStatsOWSumSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way times from source to destination (low order
32 bits). The high order 32 bits are stored in
rttMonJitterStatsOWSumSDHigh."
::= { rttMonJitterStatsEntry 41 }
rttMonJitterStatsOWSum2SDLow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way times from source to destination
(low order 32 bits)."
::= { rttMonJitterStatsEntry 42 }
rttMonJitterStatsOWSum2SDHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way times from source to destination
(high order 32 bits)."
::= { rttMonJitterStatsEntry 43 }
rttMonJitterStatsOWMinSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The minimum of all one way times from source to destination.
rttMonJitterStatsOWMinSD object is superseded by
rttMonJitterStatsOWMinSDNew."
::= { rttMonJitterStatsEntry 44 }
rttMonJitterStatsOWMaxSD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The maximum of all one way times from source to destination.
rttMonJitterStatsOWMaxSD object is superseded by
rttMonJitterStatsOWMaxSDNew."
::= { rttMonJitterStatsEntry 45 }
rttMonJitterStatsOWSumDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way times from destination to source (low order
32 bits). The high order 32 bits are stored in
rttMonJitterStatsOWSumDSHigh."
::= { rttMonJitterStatsEntry 46 }
rttMonJitterStatsOWSum2DSLow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way times from destination to source
(low order 32 bits)."
::= { rttMonJitterStatsEntry 47 }
rttMonJitterStatsOWSum2DSHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way times from destination to source
(high order 32 bits)."
::= { rttMonJitterStatsEntry 48 }
rttMonJitterStatsOWMinDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The minimum of all one way times from destination to source.
rttMonJitterStatsOWMinDS object is superseded by
rttMonJitterStatsOWMinDSNew."
::= { rttMonJitterStatsEntry 49 }
rttMonJitterStatsOWMaxDS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The maximum of all one way times from destination to source.
rttMonJitterStatsOWMaxDS object is superseded by
rttMonJitterStatsOWMaxDSNew."
::= { rttMonJitterStatsEntry 50 }
rttMonJitterStatsNumOfOW OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of one way times that are successfully measured."
::= { rttMonJitterStatsEntry 51 }
rttMonJitterStatsOWMinSDNew OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all one way times from source to destination.
Replaces deprecated rttMonJitterStatsOWMinSD."
::= { rttMonJitterStatsEntry 52 }
rttMonJitterStatsOWMaxSDNew OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all one way times from source to destination.
Replaces deprecated rttMonJitterStatsOWMaxSD."
::= { rttMonJitterStatsEntry 53 }
rttMonJitterStatsOWMinDSNew OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all one way times from destination to source.
Replaces deprecated rttMonJitterStatsOWMinDS."
::= { rttMonJitterStatsEntry 54 }
rttMonJitterStatsOWMaxDSNew OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all one way times from destination to source.
Replaces deprecated rttMonJitterStatsOWMaxDS"
::= { rttMonJitterStatsEntry 55 }
rttMonJitterStatsMinOfMOS OBJECT-TYPE
SYNTAX Gauge32 (0 | 100..500)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all MOS values for the jitter operations
in hundreds.
This value will be 0 if
- rttMonEchoAdminCodecType of the operation is notApplicable
- the operation is not started
- the operation is started but failed
This value will be 1 for packet loss of 10% or more."
::= { rttMonJitterStatsEntry 56 }
rttMonJitterStatsMaxOfMOS OBJECT-TYPE
SYNTAX Gauge32 (0 | 100..500)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all MOS values for the jitter operations
in hunderds.
This value will be 0 if
- rttMonEchoAdminCodecType of the operation is notApplicable
- the operation is not started
- the operation is started but failed
This value will be 1 for packet loss of 10% or more."
::= { rttMonJitterStatsEntry 57 }
rttMonJitterStatsMinOfICPIF OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all ICPIF values for the jitter operations.
This value will be 93 for packet loss of 10% or more."
::= { rttMonJitterStatsEntry 58 }
rttMonJitterStatsMaxOfICPIF OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all ICPIF values for the jitter operations.
This value will be 93 for packet loss of 10% or more."
::= { rttMonJitterStatsEntry 59 }
rttMonJitterStatsIAJOut OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interarrival Jitter (RFC 1889) at responder"
REFERENCE
"Refer to the following documents for the definition: RFC 1889"
::= { rttMonJitterStatsEntry 60 }
rttMonJitterStatsIAJIn OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interarrival Jitter (RFC 1889) at sender"
REFERENCE
"Refer to the following documents for the definition: RFC 1889"
::= { rttMonJitterStatsEntry 61 }
rttMonJitterStatsAvgJitter OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of positive and negative jitter
values for SD and DS direction."
::= { rttMonJitterStatsEntry 62 }
rttMonJitterStatsAvgJitterSD OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of positive and negative jitter
values in SD direction."
::= { rttMonJitterStatsEntry 63 }
rttMonJitterStatsAvgJitterDS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of positive and negative jitter
values in DS direction."
::= { rttMonJitterStatsEntry 64 }
rttMonJitterStatsUnSyncRTs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RTT operations that have completed with
sender and responder out of sync with NTP. The NTP sync means
the total of NTP offset on sender and responder is within
configured tolerance level."
::= { rttMonJitterStatsEntry 65 }
-- I think just like the rttMonJitterStatsRTTSum, this object is for
-- aggregated statistcs, so shouldn't be gauge32 as it will be only
-- increased.
-- Have incorporated other comments.
rttMonJitterStatsRTTSumHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTT's that are successfully measured
(high order 32 bits). The low order 32 bits are
stored in rttMonJitterStatsRTTSum."
::= { rttMonJitterStatsEntry 66 }
rttMonJitterStatsOWSumSDHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way times from source to destination
(high order 32 bits). The low order 32 bits are
stored in rttMonJitterStatsOWSumSD."
::= { rttMonJitterStatsEntry 67 }
rttMonJitterStatsOWSumDSHigh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way times from destination to source
(high order 32 bits). The low order 32 bits are stored
in rttMonJitterStatsOWSumDS."
::= { rttMonJitterStatsEntry 68 }
rttMonJitterStatsNumOverThresh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of RTTs that were over
the threshold value."
::= { rttMonJitterStatsEntry 69 }
-- Auto SAA L3 MPLS VPN LPD Group Stats Collection Table
rttMonLpdGrpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonLpdGrpStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Auto SAA L3 MPLS VPN LPD Group Database.
The LPD Group statistics table contains summarized performance
statistics for the LPD group.
LPD Group - The set of 'single probes' which are subset of the
'lspGroup' probe traversing set of paths between two PE end
points are grouped together and called as the LPD group. The
LPD group will be uniquely referenced by the LPD Group ID.
A rolling accumulated history of this information is maintained
in a series of hourly 'group(s)'.
Each conceptual statistics row has a current hourly group, into
which RTT results are accumulated. At the end of each hour a new
hourly group is created which then becomes current. The
counters and accumulators in the new group are initialized to
zero. The previous group(s) is kept in the table until the table
contains rttMplsVpnMonTypeLpdStatHours groups for the
conceptual statistics row; at this point, the oldest group is
discarded and is replaced by the newly created one. The hourly
group is uniquely identified by the
rttMonLpdGrpStatsStartTimeIndex object."
::= { rttMonStats 7 }
rttMonLpdGrpStatsEntry OBJECT-TYPE
SYNTAX RttMonLpdGrpStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects which accumulate the results of a set of RTT
operations over a 60 minute time period.
The LPD group statistics table is a rollover table. When
rttMonLpdGrpStatsStartTimeIndex groups exceeds the
rttMplsVpnMonTypeLpdStatHours value, the oldest corresponding
hourly group will be deleted and will be replaced with the new
rttMonLpdGrpStatsStartTimeIndex hourly group.
The LPD group statistics table has two indices. Each described
as follows:
- The first index correlates its entries to a LPD group via the
rttMonLpdGrpStatsGroupIndex object.
- The second index is a rollover group and it uniquely
identifies a 60 minute group. (The
rttMonLpdGrpStatsStartTimeIndex is used to make this value
unique.)"
INDEX {
rttMonLpdGrpStatsGroupIndex,
rttMonLpdGrpStatsStartTimeIndex
}
::= { rttMonLpdGrpStatsTable 1 }
RttMonLpdGrpStatsEntry ::= SEQUENCE {
rttMonLpdGrpStatsGroupIndex Integer32,
rttMonLpdGrpStatsStartTimeIndex TimeStamp,
rttMonLpdGrpStatsTargetPE RttMonTargetAddress,
rttMonLpdGrpStatsNumOfPass Integer32,
rttMonLpdGrpStatsNumOfFail Integer32,
rttMonLpdGrpStatsNumOfTimeout Integer32,
rttMonLpdGrpStatsAvgRTT Integer32,
rttMonLpdGrpStatsMinRTT Integer32,
rttMonLpdGrpStatsMaxRTT Integer32,
rttMonLpdGrpStatsMinNumPaths Integer32,
rttMonLpdGrpStatsMaxNumPaths Integer32,
rttMonLpdGrpStatsLPDStartTime TimeStamp,
rttMonLpdGrpStatsLPDFailOccurred TruthValue,
rttMonLpdGrpStatsLPDFailCause RttMplsVpnMonLpdFailureSense,
rttMonLpdGrpStatsLPDCompTime Integer32,
rttMonLpdGrpStatsGroupStatus RttMplsVpnMonLpdGrpStatus,
rttMonLpdGrpStatsGroupProbeIndex Integer32,
rttMonLpdGrpStatsPathIds DisplayString,
rttMonLpdGrpStatsProbeStatus DisplayString,
rttMonLpdGrpStatsResetTime TimeStamp
}
rttMonLpdGrpStatsGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies a row in rttMonLpdGrpStatsTable.
This is a pseudo-random number which identifies a particular
LPD group."
::= { rttMonLpdGrpStatsEntry 1 }
rttMonLpdGrpStatsStartTimeIndex OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The time when this row was created.
This object is the second index of the rttMonLpdGrpStatsTable.
When the number of rttMonLpdGrpStatsStartTimeIndex groups
exceeds the rttMplsVpnMonTypeLpdStatHours value, the oldest
rttMonLpdGrpStatsStartTimeIndex group will be removed and
replaced with the new entry."
::= { rttMonLpdGrpStatsEntry 2 }
rttMonLpdGrpStatsTargetPE OBJECT-TYPE
SYNTAX RttMonTargetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object is a string that specifies the address of the
target PE for this LPD group."
::= { rttMonLpdGrpStatsEntry 3 }
rttMonLpdGrpStatsNumOfPass OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "passes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of successfull completions
of 'single probes' for all the set of paths in the LPD group.
Whenever the rttMonLatestRttOperSense value is 'ok' for a
particular probe in the LPD Group this object will be
incremented.
This object will be set to '0' on reset."
::= { rttMonLpdGrpStatsEntry 4 }
rttMonLpdGrpStatsNumOfFail OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of failed operations of
'single probes' for all the set of paths in the LPD group.
Whenever the rttMonLatestRttOperSense has a value other than
'ok' or 'timeout' for a particular probe in the LPD Group this
object will be incremented.
This object will be set to '0' on reset."
::= { rttMonLpdGrpStatsEntry 5 }
rttMonLpdGrpStatsNumOfTimeout OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "timeouts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of timed out operations of
'single probes' for all the set of paths in the LPD group.
Whenever the rttMonLatestRttOperSense has a value of 'timeout'
for a particular probe in the LPD Group this object will be
incremented.
This object will be set to '0' on reset."
::= { rttMonLpdGrpStatsEntry 6 }
rttMonLpdGrpStatsAvgRTT OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average RTT across all set of probes in the LPD group.
This object will be set to '0' on reset."
::= { rttMonLpdGrpStatsEntry 7 }
rttMonLpdGrpStatsMinRTT OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of RTT's for all set of probes in the LPD group
that were successfully measured.
This object will be set to '0' on reset."
::= { rttMonLpdGrpStatsEntry 8 }
rttMonLpdGrpStatsMaxRTT OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of RTT's for all set of probes in the LPD group
that were successfully measured.
This object will be set to '0' on reset."
::= { rttMonLpdGrpStatsEntry 9 }
rttMonLpdGrpStatsMinNumPaths OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "paths"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of active paths discovered to the
rttMonLpdGrpStatsTargetPE target.
This object will be set to '0' on reset."
::= { rttMonLpdGrpStatsEntry 10 }
rttMonLpdGrpStatsMaxNumPaths OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "paths"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of active paths discovered to the
rttMonLpdGrpStatsTargetPE target.
This object will be set to '0' on reset."
::= { rttMonLpdGrpStatsEntry 11 }
rttMonLpdGrpStatsLPDStartTime OBJECT-TYPE
SYNTAX TimeStamp
UNITS "tenths of milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the last LSP Path Discovery to the group was
attempted.
This object will be set to '0' on reset."
::= { rttMonLpdGrpStatsEntry 12 }
rttMonLpdGrpStatsLPDFailOccurred OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is set to true when the LSP Path Discovery
to the target PE i.e. rttMonLpdGrpStatsTargetPE fails, and
set to false when the LSP Path Discovery succeeds.
When this value changes and rttMplsVpnMonReactLpdNotifyType is
set to 'lpdPathDiscovery' or 'lpdAll' a
rttMonLpdDiscoveryNotification will be generated.
This object will be set to 'FALSE' on reset."
::= { rttMonLpdGrpStatsEntry 13 }
rttMonLpdGrpStatsLPDFailCause OBJECT-TYPE
SYNTAX RttMplsVpnMonLpdFailureSense
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the cause of failure for the LSP Path
Discovery last attempted. It will be only valid if
rttMonLpdGrpStatsLPDFailOccurred is set to true.
This object will be set to 'unknown' on reset."
::= { rttMonLpdGrpStatsEntry 14 }
rttMonLpdGrpStatsLPDCompTime OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The completion time of the last successfull LSP Path Discovery
to the target PE.
This object will be set to '0' on reset."
::= { rttMonLpdGrpStatsEntry 15 }
rttMonLpdGrpStatsGroupStatus OBJECT-TYPE
SYNTAX RttMplsVpnMonLpdGrpStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the LPD Group status.
When the LPD Group status changes and
rttMplsVpnMonReactLpdNotifyType is set to 'lpdGroupStatus' or
'lpdAll' a rttMonLpdGrpStatusNotification will be generated.
When the LPD Group status value is 'unknown' or changes to
'unknown' this notification will not be generated.
When LSP Path Discovery is enabled for a particular row in
rttMplsVpnMonCtrlTable, 'single probes' in the 'lspGroup' probe
cannot generate notifications independently but will be
generating depending on the state of the group. Notifications
are only generated if the failure/restoration of an individual
probe causes the state of the LPD Group to change.
This object will be set to 'unknown' on reset."
::= { rttMonLpdGrpStatsEntry 16 }
rttMonLpdGrpStatsGroupProbeIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
UNITS "identifier"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies 'lspGroup' probe uniquely created for
this particular LPD Group."
::= { rttMonLpdGrpStatsEntry 17 }
rttMonLpdGrpStatsPathIds OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string which holds the list of information to uniquely
identify the paths to the target PE. This information is used
by the 'single probes' when testing the paths.
Following three parameters are needed to uniquely identify a
path
- lsp-selector (127.x.x.x)
- outgoing-interface (i/f)
- label-stack (s), if mutiple labels they will be colon (:)
separated.
These parameters will be hyphen (-) separated for a particular
path. This set of information will be comma (,) separated for
all the paths discovered as part of this LPD Group.
For example: If there are 5 paths in the LPD group then this
object will return all the identifier's to uniquely identify
the path.
The output will look like '127.0.0.1-Se3/0.1-20:18,
127.0.0.2-Se3/0.1-20,127.0.0.3-Se3/0.1-20,127.0.0.4-Se3/0.1-20,
127.0.0.5-Se3/0.1-20'.
This object will be set to '0' on reset."
::= { rttMonLpdGrpStatsEntry 18 }
rttMonLpdGrpStatsProbeStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string which holds the latest operation return code for
all the set of 'single probes' which are part of the LPD group.
The return codes will be comma separated and will follow the
same sequence of probes as followed in
'rttMonLpdGrpStatsPathIds'. The latest operation return code
will be mapped to 'up','down' or 'unkwown'.
'up' - Probe state is up when the rttMonLatestRttOperSense
value is 'ok'.
'down' - Probe state is down when the rttMonLatestRttOperSense
has value other then 'ok' and 'other'.
'unknown' - Probe state is unkown when the
rttMonLatestRttOperSense value is 'other'.
For example: If there are 5 paths in the LPD group then this
object output will look like 'ok,ok,ok,down,down'.
This object will be set to '0' on reset."
::= { rttMonLpdGrpStatsEntry 19 }
rttMonLpdGrpStatsResetTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the time when this statistics row was
last reset using the rttMonApplLpdGrpStatsReset object."
::= { rttMonLpdGrpStatsEntry 20 }
-- History Collection Table
rttMonHistoryCollectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonHistoryCollectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The history collection database.
The history table contains a point by point rolling
history of the most recent RTT operations for each
conceptual RTT control row. The rolling history of this
information is maintained in a series of 'live(s)', each
containing a series of 'bucket(s)', each 'bucket'
contains a series of 'sample(s)'.
Each conceptual history row can have lives. A life is
defined by the rttMonCtrlOperRttLife object. A new life
will be created when rttMonCtrlOperState transitions
'active'. When the number of lives become greater
than rttMonHistoryAdminNumLives the oldest life will be
discarded and a new life will be created by incrementing
the index.
The path exploration RTT operation will be kept as an
entry in this table."
::= { rttMonHistory 1 }
rttMonHistoryCollectionEntry OBJECT-TYPE
SYNTAX RttMonHistoryCollectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of history objects that are recorded for each
RTT operation.
The history collection table has four indices. Each
described as follows:
- The first index correlates its entries to a
conceptual RTT control row via the
rttMonCtrlAdminIndex object.
- The second index uniquely identifies the results
of each 'life' as defined by the
rttMonCtrlOperRttLife object.
- The third index uniquely identifies the number of
buckets in a life. A bucket will contain one
sample per bucket if the rttMonCtrlAdminRttType
object is set to any value
other than 'pathEcho'. If the
rttMonCtrlAdminRttType object is set to
'pathEcho', a bucket will contain one sample per
hop along a path to the target (including the
target).
- The fourth index uniquely identifies the number of
samples in a bucket. Again, if the
rttMonCtrlAdminRttType object is set to
'pathEcho', this value is associated with each
hop in an ascending order, thus for the
first hop on a path, this index will be 1, the
second will be 2 and so on. For all other values
of rttMonCtrlAdminRttType this will be 1."
INDEX {
rttMonCtrlAdminIndex,
rttMonHistoryCollectionLifeIndex,
rttMonHistoryCollectionBucketIndex,
rttMonHistoryCollectionSampleIndex
}
::= { rttMonHistoryCollectionTable 1 }
RttMonHistoryCollectionEntry ::= SEQUENCE {
rttMonHistoryCollectionLifeIndex Integer32,
rttMonHistoryCollectionBucketIndex Integer32,
rttMonHistoryCollectionSampleIndex Integer32,
rttMonHistoryCollectionSampleTime TimeStamp,
rttMonHistoryCollectionAddress RttMonTargetAddress,
rttMonHistoryCollectionCompletionTime Gauge32,
rttMonHistoryCollectionSense RttResponseSense,
rttMonHistoryCollectionApplSpecificSense Integer32,
rttMonHistoryCollectionSenseDescription DisplayString
}
rttMonHistoryCollectionLifeIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This uniquely defines a life for a conceptual history
row.
For a particular value of rttMonHistoryCollectionLifeIndex,
the agent assigns the first value of 1, the second value
of 2, and so on. The sequence keeps incrementing,
despite older (lower) values being removed from the
table."
::= { rttMonHistoryCollectionEntry 1 }
rttMonHistoryCollectionBucketIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When the RttMonRttType is 'pathEcho', this uniquely
defines a bucket for a given value of
rttMonHistoryCollectionLifeIndex. For all other
RttMonRttType this value will be the number of
operations per a lifetime. Thus, this object
increments on each operation attempt.
For a particular value of
rttMonHistoryCollectionLifeIndex, the agent assigns
the first value of 1, the second value of 2, and so
on. The sequence keeps incrementing until the number
of buckets equals rttMonHistoryAdminNumBuckets, after
which the most recent rttMonHistoryAdminNumBuckets
buckets are retained (the index is incremented though)."
::= { rttMonHistoryCollectionEntry 2 }
rttMonHistoryCollectionSampleIndex OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This uniquely defines a row for a given value of
rttMonHistoryCollectionBucketIndex. This object
represents a hop along a path to the Target.
For a particular value of
rttMonHistoryCollectionBucketIndex, the agent assigns
the first value of 1, the second value of 2, and so on.
The sequence keeps incrementing until the number of
samples equals rttMonHistoryAdminNumSamples, then no
new samples are created for the current
rttMonHistoryCollectionBucketIndex.
When the RttMonRttType is 'pathEcho', this value
directly represents the number of hops along a
path to a target, thus we can only support 512 hops.
For all other values of RttMonRttType this object
will be one."
::= { rttMonHistoryCollectionEntry 3 }
rttMonHistoryCollectionSampleTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that the RTT operation was initiated."
::= { rttMonHistoryCollectionEntry 4 }
rttMonHistoryCollectionAddress OBJECT-TYPE
SYNTAX RttMonTargetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the RttMonRttType is 'echo' or 'pathEcho' this
is a string which specifies the address of the target for
the this RTT operation. For all other values of
RttMonRttType this string will be null.
This address will be the address of the hop along the
path to the rttMonEchoAdminTargetAddress address,
including rttMonEchoAdminTargetAddress address, or just
the rttMonEchoAdminTargetAddress address, when the
path information is not collected. This behavior is
defined by the rttMonCtrlAdminRttType object.
The interpretation of this string depends on the type
of RTT operation selected, as specified by the
rttMonEchoAdminProtocol object.
See rttMonEchoAdminTargetAddress for a complete
description."
::= { rttMonHistoryCollectionEntry 5 }
rttMonHistoryCollectionCompletionTime OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the operation completion time of the RTT
operation. If the RTT operation fails
(rttMonHistoryCollectionSense is any
value other than ok), this has a value of 0."
::= { rttMonHistoryCollectionEntry 6 }
rttMonHistoryCollectionSense OBJECT-TYPE
SYNTAX RttResponseSense
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A sense code for the completion status of the RTT
operation."
::= { rttMonHistoryCollectionEntry 7 }
rttMonHistoryCollectionApplSpecificSense OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An application specific sense code for the
completion status of the last RTT operation. This
object will only be valid when the
rttMonHistoryCollectionSense object is set to
'applicationSpecific'. Otherwise, this object's
value is not valid."
::= { rttMonHistoryCollectionEntry 8 }
rttMonHistoryCollectionSenseDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A sense description for the completion status of
the last RTT operation when the
rttMonHistoryCollectionSense object is set to
'applicationSpecific'."
::= { rttMonHistoryCollectionEntry 9 }
-- NOTIFICATION DEFINITIONS
--
-- This section defines the traps that
-- can be generated by the agent.
rttMonNotificationsPrefix OBJECT IDENTIFIER
::= { ciscoRttMonMIB 2 }
rttMonNotifications OBJECT IDENTIFIER
::= { rttMonNotificationsPrefix 0 }
rttMonConnectionChangeNotification NOTIFICATION-TYPE
OBJECTS {
rttMonCtrlAdminTag,
rttMonHistoryCollectionAddress,
rttMonCtrlOperConnectionLostOccurred
}
STATUS deprecated
DESCRIPTION
"This notification is only valid when the RttMonRttType
is 'echo' or 'pathEcho'.
A rttMonConnectionChangeNotification indicates that a
connection to a target (not to a hop along the path
to a target) has either failed on establishment or
been lost and when reestablished. Precisely, this
has resulted in rttMonCtrlOperConnectionLostOccurred
changing value.
If History is not being collected, the instance values
for the rttMonHistoryCollectionAddress object will not
be valid. When RttMonRttType is not 'echo' or 'pathEcho'
the rttMonHistoryCollectionAddress object will be null.
rttMonConnectionChangeNotification object is superseded by
rttMonNotification."
::= { rttMonNotifications 1 }
rttMonTimeoutNotification NOTIFICATION-TYPE
OBJECTS {
rttMonCtrlAdminTag,
rttMonHistoryCollectionAddress,
rttMonCtrlOperTimeoutOccurred
}
STATUS deprecated
DESCRIPTION
"A rttMonTimeoutNotification indicates the occurrence of
a timeout for a RTT operation, and it indicates the
clearing of such a condition by a subsequent RTT
operation. Precisely, this has resulted in
rttMonCtrlOperTimeoutOccurred changing value.
When the RttMonRttType is 'pathEcho', this
notification will only be sent when the timeout
occurs during an operation to the target and not to
a hop along the path to the target. This also
applies to the clearing of the timeout.
If History is not being collected, the instance values
for the rttMonHistoryCollectionAddress object will not
be valid. When RttMonRttType is not 'echo' or 'pathEcho'
the rttMonHistoryCollectionAddress object will be null.
rttMonTimeoutNotification object is superseded by
rttMonNotification."
::= { rttMonNotifications 2 }
rttMonThresholdNotification NOTIFICATION-TYPE
OBJECTS {
rttMonCtrlAdminTag,
rttMonHistoryCollectionAddress,
rttMonCtrlOperOverThresholdOccurred
}
STATUS deprecated
DESCRIPTION
"A rttMonThresholdNotification indicates the
occurrence of a threshold violation for a RTT operation,
and it indicates the previous violation has subsided for
a subsequent RTT operation. Precisely, this has resulted
in rttMonCtrlOperOverThresholdOccurred changing value.
When the RttMonRttType is 'pathEcho', this
notification will only be sent when the threshold
violation occurs during an operation to the target and
not to a hop along the path to the target. This also
applies to the subsiding of a threshold condition.
If History is not being collected, the instance values
for the rttMonHistoryCollectionAddress object will not
be valid. When RttMonRttType is not 'echo' or 'pathEcho'
the rttMonHistoryCollectionAddress object will be null.
rttMonThresholdNotification object is superseded by
rttMonNotification."
::= { rttMonNotifications 3 }
rttMonVerifyErrorNotification NOTIFICATION-TYPE
OBJECTS {
rttMonCtrlAdminTag,
rttMonHistoryCollectionAddress,
rttMonCtrlOperVerifyErrorOccurred
}
STATUS deprecated
DESCRIPTION
"A rttMonVerifyErrorNotification indicates the
occurrence of a data corruption in an RTT operation.
rttMonVerifyErrorNotification object is superseded by
rttMonNotification."
::= { rttMonNotifications 4 }
-- %DNP% The rttMonEchoAdminLSPSelector object was added to address
-- %DNP% customer problem field trial. The prior version of the MIB
-- %DNP% has not been published externally.
rttMonNotification NOTIFICATION-TYPE
OBJECTS {
rttMonCtrlAdminTag,
rttMonHistoryCollectionAddress,
rttMonReactVar,
rttMonReactOccurred,
rttMonReactValue,
rttMonReactThresholdRising,
rttMonReactThresholdFalling,
rttMonEchoAdminLSPSelector
}
STATUS deprecated
DESCRIPTION
"A rttMonNotification indicates the occurrence of a
threshold violation, and it indicates the previous
violation has subsided for a subsequent operation.
When the RttMonRttType is 'pathEcho', this
notification will only be sent when the threshold
violation occurs during an operation to the target and
not to a hop along the path to the target. This also
applies to the subsiding of a threshold condition.
If History is not being collected, the instance values
for the rttMonHistoryCollectionAddress object will not
be valid. When RttMonRttType is not 'echo' or 'pathEcho'
the rttMonHistoryCollectionAddress object will be null.
rttMonReactVar defines the type of reaction that is
configured for the probe ( e.g jitterAvg, rtt etc ).
In the rttMonReactTable there are trap definitions
for the probes and each probe may have more than
one trap definitions for various types ( e.g rtt,
jitterAvg, packetLoossSD etc ). So the object rttMonReactVar
indicates the type ( e.g. rtt, packetLossSD, timeout etc )
for which threshold violation traps has been generated.
The object rttMonEchoAdminLSPSelector will be valid only
for the probes based on 'mplsLspPingAppl' RttMonProtocol. For
all other probes it will be null.
rttMonNotification object is superseded by
rttMonNotificationV2."
::= { rttMonNotifications 5 }
rttMonLpdDiscoveryNotification NOTIFICATION-TYPE
OBJECTS {
rttMplsVpnMonCtrlTag,
rttMonLpdGrpStatsTargetPE,
rttMonLpdGrpStatsLPDFailCause,
rttMonLpdGrpStatsLPDFailOccurred
}
STATUS current
DESCRIPTION
"A rttMonLpdDiscoveryNotification indicates that the LSP Path
Discovery to the target PE has failed, and it also indicates
the clearing of such condition. Precisely this has resulted in
rttMonLpdGrpStatsLPDFailOccurred changing value.
When the rttMonLpdGrpStatsLPDFailOccurred is 'false', the
instance value for rttMonLpdGrpStatsLPDFailCause is not valid."
::= { rttMonNotifications 6 }
rttMonLpdGrpStatusNotification NOTIFICATION-TYPE
OBJECTS {
rttMplsVpnMonCtrlTag,
rttMonLpdGrpStatsTargetPE,
rttMonLpdGrpStatsGroupStatus
}
STATUS current
DESCRIPTION
"A rttMonLpdGrpStatusNotification indicates that the LPD
Group status rttMonLpdGrpStatsGroupStatus has changed indicating
some connectivity change to the target PE.
This has resulted in rttMonLpdGrpStatsGroupStatus changing
value."
::= { rttMonNotifications 7 }
rttMonNotificationV2 NOTIFICATION-TYPE
OBJECTS {
rttMonCtrlAdminLongTag,
rttMonHistoryCollectionAddress,
rttMonReactVar,
rttMonReactOccurred,
rttMonReactValue,
rttMonReactThresholdRising,
rttMonReactThresholdFalling,
rttMonEchoAdminLSPSelector
}
STATUS current
DESCRIPTION
"A rttMonNotification indicates the occurrence of a
threshold violation, and it indicates the previous
violation has subsided for a subsequent operation.
Enhanced version of rttMonNotification which replaces
rttMonCtrlAdminTag with rttMonCtrlAdminLongTag object."
::= { rttMonNotifications 8 }
-- Conformance Information
ciscoRttMonMibConformance OBJECT IDENTIFIER
::= { ciscoRttMonMIB 3 }
ciscoRttMonMibCompliances OBJECT IDENTIFIER
::= { ciscoRttMonMibConformance 1 }
ciscoRttMonMibGroups OBJECT IDENTIFIER
::= { ciscoRttMonMibConformance 2 }
-- The following OIDs which were previously used to define
-- MODULE-COMPLIANCE statements are now obsolete:
-- ciscoRttMonMibCompliance ... ::= { ciscoRttMonMibCompliances 1 }
-- ciscoRttMonMibComplianceRev1 ... ::= { ciscoRttMonMibCompliances 2 }
-- ciscoRttMonMibComplianceRev2 ... ::= { ciscoRttMonMibCompliances 3 }
-- ciscoRttMonMibComplianceRev3 ... ::= { ciscoRttMonMibCompliances 4 }
-- ciscoRttMonMibComplianceRev4 ... ::= { ciscoRttMonMibCompliances 5 }
-- ciscoRttMonMibComplianceRev5 ... ::= { ciscoRttMonMibCompliances 6 }
-- ciscoRttMonMibComplianceRev6 ... ::= { ciscoRttMonMibCompliances 7 }
-- ciscoRttMonMibComplianceRev7 ... ::= { ciscoRttMonMibCompliances 8 }
-- ciscoRttMonMibComplianceRev8 ... ::= { ciscoRttMonMibCompliances 9 }
-- ciscoRttMonMibComplianceRev9 ... ::= { ciscoRttMonMibCompliances 10}
-- ciscoRttMonMibComplianceRev10 ... ::= { ciscoRttMonMibCompliances 11}
-- ciscoRttMonMibComplianceRev11 ... ::= { ciscoRttMonMibCompliances 12}
--
-- The following OIDs which were previously used to define
-- OBJECT-GROUPs are now obsolete:
-- ciscoCtrlGroup ... ::= { ciscoRttMonMibGroups 2 }
-- ciscoApplGroup ... ::= { ciscoRttMonMibGroups 1 }
-- ciscoApplGroupRev1 ... ::= { ciscoRttMonMibGroups 9 }
-- ciscoCtrlGroupRev3 ... ::= { ciscoRttMonMibGroups 10}
-- ciscoCtrlGroupRev5 ... ::= { ciscoRttMonMibGroups 15}
-- ciscoStatsGroupRev2 ... ::= { ciscoRttMonMibGroups 13}
-- ciscoNotificationGroup ... ::= { ciscoRttMonMibGroups 18 }
ciscoRttMonMibComplianceRev12 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for new MIB extensions for
(1) supporting LSP Path Discovery for Auto SAA L3 MPLS VPN.
(2) Group Scheduler Enhancement."
MODULE -- this module
MANDATORY-GROUPS {
ciscoStatsGroup,
ciscoHistoryGroup,
ciscoCtrlGroupRev1,
ciscoCtrlGroupRev2,
ciscoLatestOperGroupRev1,
ciscoStatsGroupRev1,
ciscoStatsGroupRev3,
ciscoStatsGroupRev4,
ciscoStatsGroupRev5,
ciscoApplGroupRev2,
ciscoApplGroupRev3,
ciscoCtrlGroupRev4,
ciscoCtrlGroupRev6,
ciscoCtrlGroupRev7,
ciscoCtrlGroupRev9,
ciscoCtrlGroupRev10,
ciscoCtrlGroupRev11,
ciscoCtrlGroupRev14,
ciscoNotificationGroupRev1
}
GROUP ciscoCtrlGroupRev16
DESCRIPTION
"ciscoCtrlGroupRev16 is only mandatory for the devices
that support LSP Ping over pseudowire."
GROUP ciscoCtrlGroupRev15
DESCRIPTION
"ciscoCtrlGroupRev15 is only mandatory for the devices
that support Ethernet CFM."
GROUP ciscoCtrlGroupRev8
DESCRIPTION
"ciscoCtrlGroupRev8 is only mandatory for the devices
that support MPLS."
GROUP ciscoStatsGroupRev7
DESCRIPTION
"ciscoStatsGroupRev7 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev13
DESCRIPTION
"ciscoCtrlGroupRev13 is only mandatory for the devices
that support MPLS."
GROUP ciscoNotificationGroupRev2
DESCRIPTION
"ciscoNotificationGroupRev2 is only mandatory for the devices
that support MPLS."
GROUP ciscoApplGroupRev4
DESCRIPTION
"ciscoApplGroupRev4 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev12
DESCRIPTION
"ciscoCtrlGroupRev12 is only mandatory for the devices
that support voice."
::= { ciscoRttMonMibCompliances 12 }
ciscoRttMonMibComplianceRev13 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the deprecated groups."
MODULE -- this module
MANDATORY-GROUPS {
ciscoRttMonDeprecatedGroupRev1,
ciscoNotificationGroup
}
::= { ciscoRttMonMibCompliances 13 }
ciscoRttMonMibComplianceRev14 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for new MIB extensions for
(1) supporting LSP Path Discovery for Auto SAA L3 MPLS VPN.
(2) Group Scheduler Enhancement."
MODULE -- this module
MANDATORY-GROUPS {
ciscoStatsGroup,
ciscoHistoryGroup,
ciscoCtrlGroupRev1,
ciscoCtrlGroupRev2,
ciscoLatestOperGroupRev1,
ciscoStatsGroupRev1,
ciscoStatsGroupRev3,
ciscoStatsGroupRev4,
ciscoStatsGroupRev5,
ciscoApplGroupRev2,
ciscoApplGroupRev3,
ciscoCtrlGroupRev4,
ciscoCtrlGroupRev6,
ciscoCtrlGroupRev7,
ciscoCtrlGroupRev9,
ciscoCtrlGroupRev10,
ciscoCtrlGroupRev11,
ciscoCtrlGroupRev14,
ciscoNotificationGroupRev1
}
GROUP ciscoCtrlGroupRev17
DESCRIPTION
"ciscoCtrlGroupRev17 is only mandatory for the devices
that support IP SLA auto measure feature."
GROUP ciscoCtrlGroupRev16
DESCRIPTION
"ciscoCtrlGroupRev16 is only mandatory for the devices
that support LSP Ping over pseudowire."
GROUP ciscoCtrlGroupRev15
DESCRIPTION
"ciscoCtrlGroupRev15 is only mandatory for the devices
that support Ethernet CFM."
GROUP ciscoCtrlGroupRev8
DESCRIPTION
"ciscoCtrlGroupRev8 is only mandatory for the devices
that support MPLS."
GROUP ciscoStatsGroupRev7
DESCRIPTION
"ciscoStatsGroupRev7 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev13
DESCRIPTION
"ciscoCtrlGroupRev13 is only mandatory for the devices
that support MPLS."
GROUP ciscoNotificationGroupRev2
DESCRIPTION
"ciscoNotificationGroupRev2 is only mandatory for the devices
that support MPLS."
GROUP ciscoApplGroupRev4
DESCRIPTION
"ciscoApplGroupRev4 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev12
DESCRIPTION
"ciscoCtrlGroupRev12 is only mandatory for the devices
that support voice."
::= { ciscoRttMonMibCompliances 14 }
ciscoRttMonMibComplianceRev15 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for new MIB extensions for
supporting Ethernet CFM for Virtual Connection."
MODULE -- this module
MANDATORY-GROUPS {
ciscoStatsGroup,
ciscoHistoryGroup,
ciscoCtrlGroupRev1,
ciscoCtrlGroupRev2,
ciscoLatestOperGroupRev1,
ciscoStatsGroupRev1,
ciscoStatsGroupRev3,
ciscoStatsGroupRev4,
ciscoStatsGroupRev5,
ciscoApplGroupRev2,
ciscoApplGroupRev3,
ciscoCtrlGroupRev4,
ciscoCtrlGroupRev6,
ciscoCtrlGroupRev7,
ciscoCtrlGroupRev9,
ciscoCtrlGroupRev10,
ciscoCtrlGroupRev11,
ciscoCtrlGroupRev14,
ciscoNotificationGroupRev1
}
GROUP ciscoCtrlGroupRev18
DESCRIPTION
"ciscoCtrlGroupRev18 is only mandatory for the devices
that support Ethernet CFM for Virtual Connection ."
GROUP ciscoCtrlGroupRev17
DESCRIPTION
"ciscoCtrlGroupRev17 is only mandatory for the devices
that support IP SLA auto measure feature."
GROUP ciscoCtrlGroupRev16
DESCRIPTION
"ciscoCtrlGroupRev16 is only mandatory for the devices
that support LSP Ping over pseudowire."
GROUP ciscoCtrlGroupRev15
DESCRIPTION
"ciscoCtrlGroupRev15 is only mandatory for the devices
that support Ethernet CFM."
GROUP ciscoCtrlGroupRev8
DESCRIPTION
"ciscoCtrlGroupRev8 is only mandatory for the devices
that support MPLS."
GROUP ciscoStatsGroupRev7
DESCRIPTION
"ciscoStatsGroupRev7 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev13
DESCRIPTION
"ciscoCtrlGroupRev13 is only mandatory for the devices
that support MPLS."
GROUP ciscoNotificationGroupRev2
DESCRIPTION
"ciscoNotificationGroupRev2 is only mandatory for the devices
that support MPLS."
GROUP ciscoApplGroupRev4
DESCRIPTION
"ciscoApplGroupRev4 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev12
DESCRIPTION
"ciscoCtrlGroupRev12 is only mandatory for the devices
that support voice."
::= { ciscoRttMonMibCompliances 15 }
ciscoRttMonMibComplianceRev16 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for new MIB extensions for
supporting high order 32 bit of RTT and OW statistics
for jitter probe."
MODULE -- this module
MANDATORY-GROUPS {
ciscoStatsGroup,
ciscoHistoryGroup,
ciscoCtrlGroupRev1,
ciscoCtrlGroupRev2,
ciscoLatestOperGroupRev1,
ciscoStatsGroupRev1,
ciscoStatsGroupRev3,
ciscoStatsGroupRev4,
ciscoStatsGroupRev5,
ciscoApplGroupRev2,
ciscoApplGroupRev3,
ciscoCtrlGroupRev4,
ciscoCtrlGroupRev6,
ciscoCtrlGroupRev7,
ciscoCtrlGroupRev10,
ciscoCtrlGroupRev11,
ciscoCtrlGroupRev14,
ciscoNotificationGroupRev1,
ciscoCtrlGroupRev9,
ciscoStatsGroupRev8
}
GROUP ciscoCtrlGroupRev18
DESCRIPTION
"ciscoCtrlGroupRev18 is only mandatory for the devices
that support Ethernet CFM for Virtual Connection ."
GROUP ciscoCtrlGroupRev17
DESCRIPTION
"ciscoCtrlGroupRev17 is only mandatory for the devices
that support IP SLA auto measure feature."
GROUP ciscoCtrlGroupRev16
DESCRIPTION
"ciscoCtrlGroupRev16 is only mandatory for the devices
that support LSP Ping over pseudowire."
GROUP ciscoCtrlGroupRev15
DESCRIPTION
"ciscoCtrlGroupRev15 is only mandatory for the devices
that support Ethernet CFM."
GROUP ciscoCtrlGroupRev8
DESCRIPTION
"ciscoCtrlGroupRev8 is only mandatory for the devices
that support MPLS."
GROUP ciscoStatsGroupRev7
DESCRIPTION
"ciscoStatsGroupRev7 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev13
DESCRIPTION
"ciscoCtrlGroupRev13 is only mandatory for the device
that support MPLS."
GROUP ciscoNotificationGroupRev2
DESCRIPTION
"ciscoNotificationGroupRev2 is only mandatory for the devices
that support MPLS."
GROUP ciscoApplGroupRev4
DESCRIPTION
"ciscoApplGroupRev4 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev12
DESCRIPTION
"ciscoCtrlGroupRev12 is only mandatory for the devices
that support voice."
::= { ciscoRttMonMibCompliances 16 }
ciscoRttMonMibComplianceRev17 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for new MIB extensions for
supporting high order 32 bit of RTT and OW statistics
for jitter probe."
MODULE -- this module
MANDATORY-GROUPS {
ciscoStatsGroup,
ciscoHistoryGroup,
ciscoCtrlGroupRev1,
ciscoCtrlGroupRev2,
ciscoLatestOperGroupRev1,
ciscoStatsGroupRev1,
ciscoStatsGroupRev3,
ciscoStatsGroupRev4,
ciscoStatsGroupRev5,
ciscoApplGroupRev2,
ciscoApplGroupRev3,
ciscoCtrlGroupRev4,
ciscoCtrlGroupRev6,
ciscoCtrlGroupRev7,
ciscoCtrlGroupRev10,
ciscoCtrlGroupRev11,
ciscoCtrlGroupRev14,
ciscoNotificationGroupRev1,
ciscoCtrlGroupRev9,
ciscoStatsGroupRev8
}
GROUP ciscoCtrlGroupRev19
DESCRIPTION
"ciscoCtrlGroupRev19 is only mandatory for the devices
that support Ethernet CFM for Virtual Connection."
GROUP ciscoCtrlGroupRev18
DESCRIPTION
"ciscoCtrlGroupRev18 is only mandatory for the devices
that support Ethernet CFM for Virtual Connection ."
GROUP ciscoCtrlGroupRev17
DESCRIPTION
"ciscoCtrlGroupRev17 is only mandatory for the devices
that support IP SLA auto measure feature."
GROUP ciscoCtrlGroupRev16
DESCRIPTION
"ciscoCtrlGroupRev16 is only mandatory for the devices
that support LSP Ping over pseudowire."
GROUP ciscoCtrlGroupRev15
DESCRIPTION
"ciscoCtrlGroupRev15 is only mandatory for the devices
that support Ethernet CFM."
GROUP ciscoCtrlGroupRev8
DESCRIPTION
"ciscoCtrlGroupRev8 is only mandatory for the devices
that support MPLS."
GROUP ciscoStatsGroupRev7
DESCRIPTION
"ciscoStatsGroupRev7 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev13
DESCRIPTION
"ciscoCtrlGroupRev13 is only mandatory for the device
that support MPLS."
GROUP ciscoNotificationGroupRev2
DESCRIPTION
"ciscoNotificationGroupRev2 is only mandatory for the devices
that support MPLS."
GROUP ciscoApplGroupRev4
DESCRIPTION
"ciscoApplGroupRev4 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev12
DESCRIPTION
"ciscoCtrlGroupRev12 is only mandatory for the devices
that support voice."
::= { ciscoRttMonMibCompliances 17 }
ciscoRttMonMibComplianceRev18 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for new MIB extensions for
supporting high order 32 bit of RTT and OW statistics
for jitter probe."
MODULE -- this module
MANDATORY-GROUPS {
ciscoStatsGroup,
ciscoHistoryGroup,
ciscoCtrlGroupRev1,
ciscoCtrlGroupRev2,
ciscoLatestOperGroupRev1,
ciscoStatsGroupRev1,
ciscoStatsGroupRev3,
ciscoStatsGroupRev4,
ciscoStatsGroupRev5,
ciscoApplGroupRev2,
ciscoApplGroupRev3,
ciscoCtrlGroupRev4,
ciscoCtrlGroupRev6,
ciscoCtrlGroupRev7,
ciscoCtrlGroupRev10,
ciscoCtrlGroupRev11,
ciscoCtrlGroupRev14,
ciscoNotificationGroupRev1,
ciscoCtrlGroupRev9,
ciscoStatsGroupRev8
}
GROUP ciscoCtrlGroupRev19
DESCRIPTION
"ciscoCtrlGroupRev19 is only mandatory for the devices
that support Ethernet CFM for Virtual Connection."
GROUP ciscoCtrlGroupRev18
DESCRIPTION
"ciscoCtrlGroupRev18 is only mandatory for the devices
that support Ethernet CFM for Virtual Connection ."
GROUP ciscoCtrlGroupRev17
DESCRIPTION
"ciscoCtrlGroupRev17 is only mandatory for the devices
that support IP SLA auto measure feature."
GROUP ciscoCtrlGroupRev16
DESCRIPTION
"ciscoCtrlGroupRev16 is only mandatory for the devices
that support LSP Ping over pseudowire."
GROUP ciscoCtrlGroupRev15
DESCRIPTION
"ciscoCtrlGroupRev15 is only mandatory for the devices
that support Ethernet CFM."
GROUP ciscoCtrlGroupRev8
DESCRIPTION
"ciscoCtrlGroupRev8 is only mandatory for the devices
that support MPLS."
GROUP ciscoStatsGroupRev7
DESCRIPTION
"ciscoStatsGroupRev7 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev13
DESCRIPTION
"ciscoCtrlGroupRev13 is only mandatory for the device
that support MPLS."
GROUP ciscoNotificationGroupRev2
DESCRIPTION
"ciscoNotificationGroupRev2 is only mandatory for the devices
that support MPLS."
GROUP ciscoApplGroupRev4
DESCRIPTION
"ciscoApplGroupRev4 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev12
DESCRIPTION
"ciscoCtrlGroupRev12 is only mandatory for the devices
that support voice."
GROUP ciscoCtrlGroupRev20
DESCRIPTION
"ciscoCtrlGroupRev20 is only mandatory for the devices
that support Video operations."
::= { ciscoRttMonMibCompliances 18 }
ciscoRttMonMibComplianceRev19 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for new MIB extensions for
supporting high order 32 bit of RTT and OW statistics
for jitter probe."
MODULE -- this module
MANDATORY-GROUPS {
ciscoStatsGroup,
ciscoHistoryGroup,
ciscoCtrlGroupRev1,
ciscoCtrlGroupRev2,
ciscoLatestOperGroupRev1,
ciscoStatsGroupRev1,
ciscoStatsGroupRev3,
ciscoStatsGroupRev4,
ciscoStatsGroupRev5,
ciscoApplGroupRev2,
ciscoApplGroupRev3,
ciscoCtrlGroupRev4,
ciscoCtrlGroupRev6,
ciscoCtrlGroupRev7,
ciscoCtrlGroupRev10,
ciscoCtrlGroupRev11,
ciscoCtrlGroupRev14,
ciscoNotificationGroupRev1,
ciscoCtrlGroupRev9,
ciscoStatsGroupRev8
}
GROUP ciscoCtrlGroupRev19
DESCRIPTION
"ciscoCtrlGroupRev19 is only mandatory for the devices
that support Ethernet CFM for Virtual Connection."
GROUP ciscoCtrlGroupRev18
DESCRIPTION
"ciscoCtrlGroupRev18 is only mandatory for the devices
that support Ethernet CFM for Virtual Connection ."
GROUP ciscoCtrlGroupRev17
DESCRIPTION
"ciscoCtrlGroupRev17 is only mandatory for the devices
that support IP SLA auto measure feature."
GROUP ciscoCtrlGroupRev16
DESCRIPTION
"ciscoCtrlGroupRev16 is only mandatory for the devices
that support LSP Ping over pseudowire."
GROUP ciscoCtrlGroupRev15
DESCRIPTION
"ciscoCtrlGroupRev15 is only mandatory for the devices
that support Ethernet CFM."
GROUP ciscoCtrlGroupRev8
DESCRIPTION
"ciscoCtrlGroupRev8 is only mandatory for the devices
that support MPLS."
GROUP ciscoStatsGroupRev7
DESCRIPTION
"ciscoStatsGroupRev7 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev13
DESCRIPTION
"ciscoCtrlGroupRev13 is only mandatory for the device
that support MPLS."
GROUP ciscoNotificationGroupRev2
DESCRIPTION
"ciscoNotificationGroupRev2 is only mandatory for the devices
that support MPLS."
GROUP ciscoApplGroupRev4
DESCRIPTION
"ciscoApplGroupRev4 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev12
DESCRIPTION
"ciscoCtrlGroupRev12 is only mandatory for the devices
that support voice."
GROUP ciscoCtrlGroupRev20
DESCRIPTION
"ciscoCtrlGroupRev20 is only mandatory for the devices
that support Video operations."
GROUP ciscoCtrlGroupRev21
DESCRIPTION
"ciscoCtrlGroupRev21 is only mandatory for video operation with
DSCP, DSP reservation, and source interface support."
GROUP ciscoCtrlGroupRev22
DESCRIPTION
"ciscoCtrlGroupRev22 is optional for video probes using emulate
source address, port, target address, and port."
::= { ciscoRttMonMibCompliances 19 }
ciscoRttMonMibComplianceRev20 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"This compliance statement specifies the minimal
requirements an implementation must meet in order to
claim full compliance with the definition of the CISCO-
RTTMON-MIB."
MODULE -- this module
MANDATORY-GROUPS {
ciscoStatsGroup,
ciscoHistoryGroup,
ciscoCtrlGroupRev1,
ciscoCtrlGroupRev2,
ciscoLatestOperGroupRev1,
ciscoStatsGroupRev1,
ciscoStatsGroupRev3,
ciscoStatsGroupRev4,
ciscoStatsGroupRev5,
ciscoApplGroupRev2,
ciscoApplGroupRev3,
ciscoCtrlGroupRev4,
ciscoCtrlGroupRev6,
ciscoCtrlGroupRev7,
ciscoCtrlGroupRev10,
ciscoCtrlGroupRev11,
ciscoCtrlGroupRev14,
ciscoNotificationGroupRev1,
ciscoCtrlGroupRev9,
ciscoStatsGroupRev8,
ciscoCtrlGroupRev24,
ciscoCtrlGroupRev25,
ciscoStatsGroupRev2
}
GROUP ciscoCtrlGroupRev19
DESCRIPTION
"ciscoCtrlGroupRev19 is only mandatory for the devices
that support Ethernet CFM for Virtual Connection."
GROUP ciscoCtrlGroupRev18
DESCRIPTION
"ciscoCtrlGroupRev18 is only mandatory for the devices
that support Ethernet CFM for Virtual Connection ."
GROUP ciscoCtrlGroupRev17
DESCRIPTION
"ciscoCtrlGroupRev17 is only mandatory for the devices
that support IP SLA auto measure feature."
GROUP ciscoCtrlGroupRev16
DESCRIPTION
"ciscoCtrlGroupRev16 is only mandatory for the devices
that support LSP Ping over pseudowire."
GROUP ciscoCtrlGroupRev15
DESCRIPTION
"ciscoCtrlGroupRev15 is only mandatory for the devices
that support Ethernet CFM."
GROUP ciscoCtrlGroupRev8
DESCRIPTION
"ciscoCtrlGroupRev8 is only mandatory for the devices
that support MPLS."
GROUP ciscoStatsGroupRev7
DESCRIPTION
"ciscoStatsGroupRev7 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev13
DESCRIPTION
"ciscoCtrlGroupRev13 is only mandatory for the device
that support MPLS."
GROUP ciscoNotificationGroupRev2
DESCRIPTION
"ciscoNotificationGroupRev2 is only mandatory for the devices
that support MPLS."
GROUP ciscoApplGroupRev4
DESCRIPTION
"ciscoApplGroupRev4 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev12
DESCRIPTION
"ciscoCtrlGroupRev12 is only mandatory for the devices
that support voice."
GROUP ciscoCtrlGroupRev20
DESCRIPTION
"ciscoCtrlGroupRev20 is only mandatory for the devices
that support Video operations."
GROUP ciscoCtrlGroupRev21
DESCRIPTION
"ciscoCtrlGroupRev21 is only mandatory for video operation with
DSCP, DSP reservation, and source interface support."
GROUP ciscoCtrlGroupRev22
DESCRIPTION
"ciscoCtrlGroupRev22 is optional for video probes using emulate
source address, port, target address, and port."
GROUP ciscoCtrlGroupRev23
DESCRIPTION
"ciscoCtrlGroupRev22 is mandatory for Y1731 operation."
::= { ciscoRttMonMibCompliances 20 }
ciscoRttMonMibComplianceRev21 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Please enter description here"
MODULE -- this module
MANDATORY-GROUPS {
ciscoStatsGroup,
ciscoHistoryGroup,
ciscoCtrlGroupRev1,
ciscoCtrlGroupRev2,
ciscoLatestOperGroupRev1,
ciscoStatsGroupRev1,
ciscoStatsGroupRev3,
ciscoStatsGroupRev4,
ciscoStatsGroupRev5,
ciscoApplGroupRev2,
ciscoApplGroupRev3,
ciscoCtrlGroupRev4,
ciscoCtrlGroupRev6,
ciscoCtrlGroupRev7,
ciscoCtrlGroupRev11,
ciscoCtrlGroupRev14,
ciscoNotificationGroupRev1,
ciscoCtrlGroupRev9,
ciscoStatsGroupRev8,
ciscoCtrlGroupRev24,
ciscoCtrlGroupRev25,
ciscoCtrlGroupRev28,
ciscoStatsGroupRev9
}
GROUP ciscoCtrlGroupRev19
DESCRIPTION
"ciscoCtrlGroupRev19 is only mandatory for the devices
that support Ethernet CFM for Virtual Connection."
GROUP ciscoCtrlGroupRev18
DESCRIPTION
"ciscoCtrlGroupRev18 is only mandatory for the devices
that support Ethernet CFM for Virtual Connection ."
GROUP ciscoCtrlGroupRev17
DESCRIPTION
"ciscoCtrlGroupRev17 is only mandatory for the devices
that support IP SLA auto measure feature."
GROUP ciscoCtrlGroupRev16
DESCRIPTION
"ciscoCtrlGroupRev16 is only mandatory for the devices
that support LSP Ping over pseudowire."
GROUP ciscoCtrlGroupRev15
DESCRIPTION
"ciscoCtrlGroupRev15 is only mandatory for the devices
that support Ethernet CFM."
GROUP ciscoCtrlGroupRev8
DESCRIPTION
"ciscoCtrlGroupRev8 is only mandatory for the devices
that support MPLS."
GROUP ciscoStatsGroupRev7
DESCRIPTION
"ciscoStatsGroupRev7 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev13
DESCRIPTION
"ciscoCtrlGroupRev13 is only mandatory for the device
that support MPLS."
GROUP ciscoNotificationGroupRev2
DESCRIPTION
"ciscoNotificationGroupRev2 is only mandatory for the devices
that support MPLS."
GROUP ciscoApplGroupRev4
DESCRIPTION
"ciscoApplGroupRev4 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev12
DESCRIPTION
"ciscoCtrlGroupRev12 is only mandatory for the devices
that support voice."
GROUP ciscoCtrlGroupRev20
DESCRIPTION
"ciscoCtrlGroupRev20 is only mandatory for the devices
that support Video operations."
GROUP ciscoCtrlGroupRev21
DESCRIPTION
"ciscoCtrlGroupRev21 is only mandatory for video operation with
DSCP, DSP reservation, and source interface support."
GROUP ciscoCtrlGroupRev22
DESCRIPTION
"ciscoCtrlGroupRev22 is optional for video probes using emulate
source address, port, target address, and port."
GROUP ciscoCtrlGroupRev23
DESCRIPTION
"ciscoCtrlGroupRev23 is mandatory for Y1731 operation."
GROUP ciscoCtrlGroupRev26
DESCRIPTION
"ciscoCtrlGroupRev26 is optional for Y1731 Synthetic Loss
Measurement"
GROUP ciscoCtrlGroupRev27
DESCRIPTION
"ciscoCtrlGroupRev27 is optional for jitter probes to utilize
lower layer (Hardware /Packet Processor) timstamping. Currently
supported only for udp jitter probe."
::= { ciscoRttMonMibCompliances 21 }
ciscoRttMonMibComplianceRev22 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for CISCO-RTTMON-MIB"
MODULE -- this module
MANDATORY-GROUPS {
ciscoStatsGroup,
ciscoHistoryGroup,
ciscoCtrlGroupRev1,
ciscoCtrlGroupRev2,
ciscoLatestOperGroupRev1,
ciscoStatsGroupRev1,
ciscoStatsGroupRev3,
ciscoStatsGroupRev4,
ciscoStatsGroupRev5,
ciscoApplGroupRev2,
ciscoApplGroupRev3,
ciscoCtrlGroupRev4,
ciscoCtrlGroupRev6,
ciscoCtrlGroupRev7,
ciscoCtrlGroupRev11,
ciscoCtrlGroupRev14,
ciscoNotificationGroupRev1,
ciscoCtrlGroupRev9,
ciscoStatsGroupRev8,
ciscoCtrlGroupRev24,
ciscoCtrlGroupRev25,
ciscoCtrlGroupRev28,
ciscoStatsGroupRev9,
ciscoStatsGroupRev10
}
GROUP ciscoCtrlGroupRev19
DESCRIPTION
"ciscoCtrlGroupRev19 is only mandatory for the devices
that support Ethernet CFM for Virtual Connection."
GROUP ciscoCtrlGroupRev18
DESCRIPTION
"ciscoCtrlGroupRev18 is only mandatory for the devices
that support Ethernet CFM for Virtual Connection ."
GROUP ciscoCtrlGroupRev17
DESCRIPTION
"ciscoCtrlGroupRev17 is only mandatory for the devices
that support IP SLA auto measure feature."
GROUP ciscoCtrlGroupRev16
DESCRIPTION
"ciscoCtrlGroupRev16 is only mandatory for the devices
that support LSP Ping over pseudowire."
GROUP ciscoCtrlGroupRev15
DESCRIPTION
"ciscoCtrlGroupRev15 is only mandatory for the devices
that support Ethernet CFM."
GROUP ciscoCtrlGroupRev8
DESCRIPTION
"ciscoCtrlGroupRev8 is only mandatory for the devices
that support MPLS."
GROUP ciscoStatsGroupRev7
DESCRIPTION
"ciscoStatsGroupRev7 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev13
DESCRIPTION
"ciscoCtrlGroupRev13 is only mandatory for the device
that support MPLS."
GROUP ciscoNotificationGroupRev2
DESCRIPTION
"ciscoNotificationGroupRev2 is only mandatory for the devices
that support MPLS."
GROUP ciscoApplGroupRev4
DESCRIPTION
"ciscoApplGroupRev4 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev12
DESCRIPTION
"ciscoCtrlGroupRev12 is only mandatory for the devices
that support voice."
GROUP ciscoCtrlGroupRev20
DESCRIPTION
"ciscoCtrlGroupRev20 is only mandatory for the devices
that support Video operations."
GROUP ciscoCtrlGroupRev21
DESCRIPTION
"ciscoCtrlGroupRev21 is only mandatory for video operation with
DSCP, DSP reservation, and source interface support."
GROUP ciscoCtrlGroupRev22
DESCRIPTION
"ciscoCtrlGroupRev22 is optional for video probes using emulate
source address, port, target address, and port."
GROUP ciscoCtrlGroupRev23
DESCRIPTION
"ciscoCtrlGroupRev23 is mandatory for Y1731 operation."
GROUP ciscoCtrlGroupRev26
DESCRIPTION
"ciscoCtrlGroupRev26 is optional for Y1731 Synthetic Loss
Measurement"
GROUP ciscoCtrlGroupRev27
DESCRIPTION
"ciscoCtrlGroupRev27 is optional for jitter probes to utilize
lower layer (Hardware /Packet Processor) timstamping. Currently
supported only for udp jitter probe."
GROUP ciscoCtrlGroupRev29
DESCRIPTION
"ciscoCtrlGroupRev29 is only mandatory for Fabric Path Echo
probe."
::= { ciscoRttMonMibCompliances 22 }
ciscoRttMonMibComplianceRev23 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for CISCO-RTTMON-MIB"
MODULE -- this module
MANDATORY-GROUPS {
ciscoStatsGroup,
ciscoHistoryGroup,
ciscoCtrlGroupRev1,
ciscoCtrlGroupRev2,
ciscoLatestOperGroupRev1,
ciscoStatsGroupRev1,
ciscoStatsGroupRev3,
ciscoStatsGroupRev4,
ciscoStatsGroupRev5,
ciscoApplGroupRev2,
ciscoApplGroupRev3,
ciscoCtrlGroupRev4,
ciscoCtrlGroupRev6,
ciscoCtrlGroupRev7,
ciscoCtrlGroupRev11,
ciscoCtrlGroupRev14,
ciscoNotificationGroupRev1,
ciscoCtrlGroupRev9,
ciscoStatsGroupRev8,
ciscoCtrlGroupRev24,
ciscoCtrlGroupRev25,
ciscoCtrlGroupRev28,
ciscoStatsGroupRev9,
ciscoStatsGroupRev10
}
GROUP ciscoCtrlGroupRev19
DESCRIPTION
"ciscoCtrlGroupRev19 is only mandatory for the devices
that support Ethernet CFM for Virtual Connection."
GROUP ciscoCtrlGroupRev18
DESCRIPTION
"ciscoCtrlGroupRev18 is only mandatory for the devices
that support Ethernet CFM for Virtual Connection ."
GROUP ciscoCtrlGroupRev17
DESCRIPTION
"ciscoCtrlGroupRev17 is only mandatory for the devices
that support IP SLA auto measure feature."
GROUP ciscoCtrlGroupRev16
DESCRIPTION
"ciscoCtrlGroupRev16 is only mandatory for the devices
that support LSP Ping over pseudowire."
GROUP ciscoCtrlGroupRev15
DESCRIPTION
"ciscoCtrlGroupRev15 is only mandatory for the devices
that support Ethernet CFM."
GROUP ciscoCtrlGroupRev8
DESCRIPTION
"ciscoCtrlGroupRev8 is only mandatory for the devices
that support MPLS."
GROUP ciscoStatsGroupRev7
DESCRIPTION
"ciscoStatsGroupRev7 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev13
DESCRIPTION
"ciscoCtrlGroupRev13 is only mandatory for the device
that support MPLS."
GROUP ciscoNotificationGroupRev2
DESCRIPTION
"ciscoNotificationGroupRev2 is only mandatory for the devices
that support MPLS."
GROUP ciscoApplGroupRev4
DESCRIPTION
"ciscoApplGroupRev4 is only mandatory for the devices
that support MPLS."
GROUP ciscoCtrlGroupRev12
DESCRIPTION
"ciscoCtrlGroupRev12 is only mandatory for the devices
that support voice."
GROUP ciscoCtrlGroupRev20
DESCRIPTION
"ciscoCtrlGroupRev20 is only mandatory for the devices
that support Video operations."
GROUP ciscoCtrlGroupRev21
DESCRIPTION
"ciscoCtrlGroupRev21 is only mandatory for video operation with
DSCP, DSP reservation, and source interface support."
GROUP ciscoCtrlGroupRev22
DESCRIPTION
"ciscoCtrlGroupRev22 is optional for video probes using emulate
source address, port, target address, and port."
GROUP ciscoCtrlGroupRev23
DESCRIPTION
"ciscoCtrlGroupRev23 is mandatory for Y1731 operation."
GROUP ciscoCtrlGroupRev26
DESCRIPTION
"ciscoCtrlGroupRev26 is optional for Y1731 Synthetic Loss
Measurement"
GROUP ciscoCtrlGroupRev27
DESCRIPTION
"ciscoCtrlGroupRev27 is optional for jitter probes to utilize
lower layer (Hardware /Packet Processor) timstamping. Currently
supported only for udp jitter probe."
GROUP ciscoCtrlGroupRev29
DESCRIPTION
"ciscoCtrlGroupRev29 is only mandatory for Fabric Path Echo
probe."
GROUP ciscoCtrlGroupRev30
DESCRIPTION
"ciscoCtrlGroupRev30 is optional for classic and group sla
scheduler."
GROUP ciscoCtrlGroupRev31
DESCRIPTION
"ciscoCtrlGroupRev31 is optional for specifying longer tag
values when creating a conceptual RTT control row."
GROUP ciscoNotificationGroupRev3
DESCRIPTION
"ciscoNotificationGroupRev3 is optional for receiving
notifications containing rttMonCtrlAdminLongTag."
OBJECT rttMonCtrlAdminFrequency
SYNTAX Integer32 (1..604800)
DESCRIPTION
"Value 0 is not valid for frequency"
OBJECT rttMonEchoAdminTargetPort
SYNTAX Integer32 (1..65536)
DESCRIPTION
"Value 0 is not valid for port"
OBJECT rttMonEchoAdminSourcePort
SYNTAX Integer32 (1..65536)
DESCRIPTION
"Value 0 is not valid for port"
OBJECT rttMonEchoAdminEmulateSourcePort
SYNTAX Integer32 (1..65536)
DESCRIPTION
"Value 0 is not valid for port"
OBJECT rttMonEchoAdminEmulateTargetPort
SYNTAX Integer32 (1..65536)
DESCRIPTION
"Value 0 is not valid for port"
::= { ciscoRttMonMibCompliances 23 }
ciscoStatsGroup OBJECT-GROUP
OBJECTS {
rttMonStatsCaptureCompletions,
rttMonStatsCaptureOverThresholds,
rttMonStatsCaptureSumCompletionTime,
rttMonStatsCaptureSumCompletionTime2Low,
rttMonStatsCaptureSumCompletionTime2High,
rttMonStatsCaptureCompletionTimeMax,
rttMonStatsCaptureCompletionTimeMin,
rttMonStatsCollectNumDisconnects,
rttMonStatsCollectTimeouts,
rttMonStatsCollectBusies,
rttMonStatsCollectNoConnections,
rttMonStatsCollectDrops,
rttMonStatsCollectSequenceErrors,
rttMonStatsCollectVerifyErrors,
rttMonStatsCollectAddress,
rttMonStatsTotalsElapsedTime,
rttMonStatsTotalsInitiations
}
STATUS current
DESCRIPTION
"A collection of objects providing accumulated statistical
history."
::= { ciscoRttMonMibGroups 3 }
ciscoHistoryGroup OBJECT-GROUP
OBJECTS {
rttMonHistoryCollectionSampleTime,
rttMonHistoryCollectionAddress,
rttMonHistoryCollectionCompletionTime,
rttMonHistoryCollectionSense,
rttMonHistoryCollectionApplSpecificSense,
rttMonHistoryCollectionSenseDescription
}
STATUS current
DESCRIPTION
"A collection of objects providing point by point
history of each RTT operation."
::= { ciscoRttMonMibGroups 4 }
ciscoCtrlGroupRev1 OBJECT-GROUP
OBJECTS {
rttMonEchoAdminTargetPort,
rttMonEchoAdminSourceAddress,
rttMonEchoAdminSourcePort,
rttMonEchoAdminControlEnable,
rttMonEchoAdminTOS,
rttMonEchoAdminLSREnable,
rttMonEchoPathAdminHopAddress
}
STATUS current
DESCRIPTION
"A collection of objects that were added to enhance the
functionality of the RTT application."
::= { ciscoRttMonMibGroups 5 }
ciscoCtrlGroupRev2 OBJECT-GROUP
OBJECTS {
rttMonEchoAdminTargetAddressString,
rttMonEchoAdminNameServer,
rttMonEchoAdminOperation,
rttMonEchoAdminHTTPVersion,
rttMonEchoAdminURL,
rttMonEchoAdminCache,
rttMonEchoAdminInterval,
rttMonEchoAdminNumPackets,
rttMonEchoAdminProxy,
rttMonEchoAdminString1,
rttMonEchoAdminString2,
rttMonEchoAdminString3,
rttMonEchoAdminString4,
rttMonEchoAdminString5,
rttMonEchoAdminMode
}
STATUS current
DESCRIPTION
"A collection of objects that were added to enhance the
functionality of the RTT application to configure HTTP, DNS and
Jitter probes."
::= { ciscoRttMonMibGroups 6 }
ciscoLatestOperGroupRev1 OBJECT-GROUP
OBJECTS {
rttMonLatestHTTPOperRTT,
rttMonLatestHTTPOperDNSRTT,
rttMonLatestHTTPOperTCPConnectRTT,
rttMonLatestHTTPOperTransactionRTT,
rttMonLatestHTTPOperMessageBodyOctets,
rttMonLatestHTTPOperSense,
rttMonLatestHTTPErrorSenseDescription,
rttMonLatestJitterOperNumOfRTT,
rttMonLatestJitterOperRTTSum,
rttMonLatestJitterOperRTTSum2,
rttMonLatestJitterOperRTTMin,
rttMonLatestJitterOperRTTMax,
rttMonLatestJitterOperMinOfPositivesSD,
rttMonLatestJitterOperMaxOfPositivesSD,
rttMonLatestJitterOperNumOfPositivesSD,
rttMonLatestJitterOperSumOfPositivesSD,
rttMonLatestJitterOperSum2PositivesSD,
rttMonLatestJitterOperMinOfNegativesSD,
rttMonLatestJitterOperMaxOfNegativesSD,
rttMonLatestJitterOperNumOfNegativesSD,
rttMonLatestJitterOperSumOfNegativesSD,
rttMonLatestJitterOperSum2NegativesSD,
rttMonLatestJitterOperMinOfPositivesDS,
rttMonLatestJitterOperMaxOfPositivesDS,
rttMonLatestJitterOperNumOfPositivesDS,
rttMonLatestJitterOperSumOfPositivesDS,
rttMonLatestJitterOperSum2PositivesDS,
rttMonLatestJitterOperMinOfNegativesDS,
rttMonLatestJitterOperMaxOfNegativesDS,
rttMonLatestJitterOperNumOfNegativesDS,
rttMonLatestJitterOperSumOfNegativesDS,
rttMonLatestJitterOperSum2NegativesDS,
rttMonLatestJitterOperPacketLossSD,
rttMonLatestJitterOperPacketLossDS,
rttMonLatestJitterOperPacketOutOfSequence,
rttMonLatestJitterOperPacketMIA,
rttMonLatestJitterOperPacketLateArrival,
rttMonLatestJitterOperSense,
rttMonLatestJitterErrorSenseDescription
}
STATUS current
DESCRIPTION
"A collection of objects that were added to store the latest
operational results for HTTP, DNS and Jitter probes."
::= { ciscoRttMonMibGroups 7 }
ciscoStatsGroupRev1 OBJECT-GROUP
OBJECTS {
rttMonHTTPStatsCompletions,
rttMonHTTPStatsOverThresholds,
rttMonHTTPStatsRTTSum,
rttMonHTTPStatsRTTSum2Low,
rttMonHTTPStatsRTTSum2High,
rttMonHTTPStatsRTTMin,
rttMonHTTPStatsRTTMax,
rttMonHTTPStatsDNSRTTSum,
rttMonHTTPStatsTCPConnectRTTSum,
rttMonHTTPStatsTransactionRTTSum,
rttMonHTTPStatsMessageBodyOctetsSum,
rttMonHTTPStatsDNSServerTimeout,
rttMonHTTPStatsTCPConnectTimeout,
rttMonHTTPStatsTransactionTimeout,
rttMonHTTPStatsDNSQueryError,
rttMonHTTPStatsHTTPError,
rttMonHTTPStatsError,
rttMonHTTPStatsBusies,
rttMonJitterStatsCompletions,
rttMonJitterStatsOverThresholds,
rttMonJitterStatsNumOfRTT,
rttMonJitterStatsRTTSum,
rttMonJitterStatsRTTSum2Low,
rttMonJitterStatsRTTSum2High,
rttMonJitterStatsRTTMin,
rttMonJitterStatsRTTMax,
rttMonJitterStatsMinOfPositivesSD,
rttMonJitterStatsMaxOfPositivesSD,
rttMonJitterStatsNumOfPositivesSD,
rttMonJitterStatsSumOfPositivesSD,
rttMonJitterStatsSum2PositivesSDLow,
rttMonJitterStatsSum2PositivesSDHigh,
rttMonJitterStatsMinOfNegativesSD,
rttMonJitterStatsMaxOfNegativesSD,
rttMonJitterStatsNumOfNegativesSD,
rttMonJitterStatsSumOfNegativesSD,
rttMonJitterStatsSum2NegativesSDLow,
rttMonJitterStatsSum2NegativesSDHigh,
rttMonJitterStatsMinOfPositivesDS,
rttMonJitterStatsMaxOfPositivesDS,
rttMonJitterStatsNumOfPositivesDS,
rttMonJitterStatsSumOfPositivesDS,
rttMonJitterStatsSum2PositivesDSLow,
rttMonJitterStatsSum2PositivesDSHigh,
rttMonJitterStatsMinOfNegativesDS,
rttMonJitterStatsMaxOfNegativesDS,
rttMonJitterStatsNumOfNegativesDS,
rttMonJitterStatsSumOfNegativesDS,
rttMonJitterStatsSum2NegativesDSLow,
rttMonJitterStatsSum2NegativesDSHigh,
rttMonJitterStatsPacketLossSD,
rttMonJitterStatsPacketLossDS,
rttMonJitterStatsPacketOutOfSequence,
rttMonJitterStatsPacketMIA,
rttMonJitterStatsPacketLateArrival,
rttMonJitterStatsError,
rttMonJitterStatsBusies
}
STATUS current
DESCRIPTION
"A collection of objects that were added to enhance the
functionality of the RTT application to store 'HTTP' and
'Jitter' probes statistics."
::= { ciscoRttMonMibGroups 8 }
ciscoApplGroupRev2 OBJECT-GROUP
OBJECTS {
rttMonApplResponder,
rttMonApplAuthKeyChain,
rttMonApplAuthKeyString1,
rttMonApplAuthKeyString2,
rttMonApplAuthKeyString3,
rttMonApplAuthKeyString4,
rttMonApplAuthKeyString5,
rttMonApplAuthStatus
}
STATUS current
DESCRIPTION
"These objects provide support for configuring responder
on a router and also configure authentication information."
::= { ciscoRttMonMibGroups 11 }
ciscoCtrlGroupRev4 OBJECT-GROUP
OBJECTS { rttMonEchoAdminVrfName }
STATUS current
DESCRIPTION
"A collection of objects that were added to enhance the
functionality of the RTT application."
::= { ciscoRttMonMibGroups 12 }
ciscoStatsGroupRev3 OBJECT-GROUP
OBJECTS {
rttMonLatestJitterOperOWSumSD,
rttMonLatestJitterOperOWSum2SD,
rttMonLatestJitterOperOWMinSD,
rttMonLatestJitterOperOWMaxSD,
rttMonLatestJitterOperOWSumDS,
rttMonLatestJitterOperOWSum2DS,
rttMonLatestJitterOperOWMinDS,
rttMonLatestJitterOperOWMaxDS,
rttMonLatestJitterOperNumOfOW,
rttMonJitterStatsOWSumSD,
rttMonJitterStatsOWSum2SDLow,
rttMonJitterStatsOWSum2SDHigh,
rttMonJitterStatsOWSumDS,
rttMonJitterStatsOWSum2DSLow,
rttMonJitterStatsOWSum2DSHigh,
rttMonJitterStatsNumOfOW,
rttMonJitterStatsOWMinSDNew,
rttMonJitterStatsOWMaxSDNew,
rttMonJitterStatsOWMinDSNew,
rttMonJitterStatsOWMaxDSNew
}
STATUS current
DESCRIPTION
"A collection of objects that were added to enhance the
functionality of the RTT application to store one way
'Jitter' probes statistics."
::= { ciscoRttMonMibGroups 14 }
ciscoCtrlGroupRev6 OBJECT-GROUP
OBJECTS {
rttMonEchoAdminCodecType,
rttMonEchoAdminCodecInterval,
rttMonEchoAdminCodecPayload,
rttMonEchoAdminCodecNumPackets,
rttMonEchoAdminICPIFAdvFactor
}
STATUS current
DESCRIPTION
"A collection of objects that were added to enhance the
functionality of the RTT application."
::= { ciscoRttMonMibGroups 16 }
ciscoStatsGroupRev4 OBJECT-GROUP
OBJECTS {
rttMonLatestJitterOperMOS,
rttMonLatestJitterOperICPIF,
rttMonJitterStatsMinOfMOS,
rttMonJitterStatsMaxOfMOS,
rttMonJitterStatsMinOfICPIF,
rttMonJitterStatsMaxOfICPIF
}
STATUS current
DESCRIPTION
"A collection of objects that were added to enhance the
functionality of the RTT application to store MOS and
ICPIF for 'Jitter' probe statistics."
::= { ciscoRttMonMibGroups 17 }
ciscoNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
rttMonConnectionChangeNotification,
rttMonTimeoutNotification,
rttMonThresholdNotification,
rttMonVerifyErrorNotification
}
STATUS deprecated
DESCRIPTION
"A collection of notifications.
ciscoNotificationGroup object is superseded by
ciscoNotificationGroupRev1."
::= { ciscoRttMonMibGroups 18 }
ciscoApplGroupRev3 OBJECT-GROUP
OBJECTS {
rttMonApplVersion,
rttMonApplMaxPacketDataSize,
rttMonApplTimeOfLastSet,
rttMonApplSupportedRttTypesValid,
rttMonApplSupportedProtocolsValid,
rttMonApplNumCtrlAdminEntry,
rttMonApplReset,
rttMonApplProbeCapacity,
rttMonApplFreeMemLowWaterMark,
rttMonApplLatestSetError
}
STATUS current
DESCRIPTION
"A collection of objects providing the RTT Monitoring
Application defaults.
This group of information is provided to the agent when
the Application starts."
::= { ciscoRttMonMibGroups 19 }
ciscoCtrlGroupRev7 OBJECT-GROUP
OBJECTS {
rttMonScheduleAdminRttRecurring,
rttMonGrpScheduleAdminProbes,
rttMonGrpScheduleAdminPeriod,
rttMonGrpScheduleAdminFrequency,
rttMonGrpScheduleAdminLife,
rttMonGrpScheduleAdminAgeout,
rttMonGrpScheduleAdminStatus
}
STATUS current
DESCRIPTION
"A collection of objects that were added to enhance the
scheduling functionality of the RTT application."
::= { ciscoRttMonMibGroups 20 }
ciscoCtrlGroupRev8 OBJECT-GROUP
OBJECTS {
rttMonEchoAdminLSPFECType,
rttMonEchoAdminLSPSelector,
rttMonEchoAdminLSPReplyMode,
rttMonEchoAdminLSPTTL,
rttMonEchoAdminLSPExp,
rttMplsVpnMonCtrlRttType,
rttMplsVpnMonCtrlVrfName,
rttMplsVpnMonCtrlTag,
rttMplsVpnMonCtrlThreshold,
rttMplsVpnMonCtrlTimeout,
rttMplsVpnMonCtrlScanInterval,
rttMplsVpnMonCtrlDelScanFactor,
rttMplsVpnMonCtrlEXP,
rttMplsVpnMonCtrlRequestSize,
rttMplsVpnMonCtrlVerifyData,
rttMplsVpnMonCtrlStorageType,
rttMplsVpnMonCtrlProbeList,
rttMplsVpnMonCtrlStatus,
rttMplsVpnMonTypeInterval,
rttMplsVpnMonTypeNumPackets,
rttMplsVpnMonTypeDestPort,
rttMplsVpnMonTypeSecFreqType,
rttMplsVpnMonTypeSecFreqValue,
rttMplsVpnMonTypeLspSelector,
rttMplsVpnMonTypeLSPReplyMode,
rttMplsVpnMonTypeLSPTTL,
rttMplsVpnMonScheduleRttStartTime,
rttMplsVpnMonSchedulePeriod,
rttMplsVpnMonScheduleFrequency,
rttMplsVpnMonReactConnectionEnable,
rttMplsVpnMonReactTimeoutEnable,
rttMplsVpnMonReactThresholdType,
rttMplsVpnMonReactThresholdCount,
rttMplsVpnMonReactActionType
}
STATUS current
DESCRIPTION
"A collection of objects that were added to support
(1) echo operations support based on MPLS LSP Ping,
(2) pathEcho operations support based on MPLS LSP Ping and
(3) Auto SAA L3 MPLS VPN enhancement."
::= { ciscoRttMonMibGroups 21 }
ciscoStatsGroupRev5 OBJECT-GROUP
OBJECTS {
rttMonJitterStatsIAJOut,
rttMonJitterStatsIAJIn,
rttMonJitterStatsAvgJitter,
rttMonJitterStatsAvgJitterSD,
rttMonJitterStatsAvgJitterDS,
rttMonJitterStatsUnSyncRTs,
rttMonLatestJitterOperIAJIn,
rttMonLatestJitterOperIAJOut,
rttMonLatestJitterOperAvgJitter,
rttMonLatestJitterOperAvgSDJ,
rttMonLatestJitterOperAvgDSJ,
rttMonLatestJitterOperOWAvgSD,
rttMonLatestJitterOperOWAvgDS,
rttMonLatestJitterOperNTPState,
rttMonLatestJitterOperUnSyncRTs
}
STATUS current
DESCRIPTION
"A collection of objects that are added to report
intera-rrival Jitter, average jitter and improve accuracy."
::= { ciscoRttMonMibGroups 22 }
ciscoCtrlGroupRev9 OBJECT-GROUP
OBJECTS {
rttMonEchoAdminPrecision,
rttMonEchoAdminProbePakPriority,
rttMonEchoAdminOWNTPSyncTolAbs,
rttMonEchoAdminOWNTPSyncTolPct,
rttMonEchoAdminOWNTPSyncTolType,
rttMonEchoAdminCalledNumber,
rttMonEchoAdminDetectPoint,
rttMonEchoAdminGKRegistration
}
STATUS current
DESCRIPTION
"A collection of objects that are added to enhance the
jitter probe accuracy."
::= { ciscoRttMonMibGroups 23 }
ciscoCtrlGroupRev10 OBJECT-GROUP
OBJECTS {
rttMonCtrlAdminOwner,
rttMonCtrlAdminTag,
rttMonCtrlAdminRttType,
rttMonCtrlAdminThreshold,
rttMonCtrlAdminFrequency,
rttMonCtrlAdminTimeout,
rttMonCtrlAdminVerifyData,
rttMonCtrlAdminStatus,
rttMonCtrlAdminNvgen,
rttMonEchoAdminProtocol,
rttMonEchoAdminTargetAddress,
rttMonEchoAdminPktDataRequestSize,
rttMonEchoAdminPktDataResponseSize,
rttMonScheduleAdminRttLife,
rttMonScheduleAdminRttStartTime,
rttMonScheduleAdminConceptRowAgeout,
rttMonStatisticsAdminNumHourGroups,
rttMonStatisticsAdminNumPaths,
rttMonStatisticsAdminNumHops,
rttMonStatisticsAdminNumDistBuckets,
rttMonStatisticsAdminDistInterval,
rttMonHistoryAdminNumLives,
rttMonHistoryAdminNumBuckets,
rttMonHistoryAdminNumSamples,
rttMonHistoryAdminFilter,
rttMonCtrlOperModificationTime,
rttMonCtrlOperDiagText,
rttMonCtrlOperResetTime,
rttMonCtrlOperOctetsInUse,
rttMonCtrlOperConnectionLostOccurred,
rttMonCtrlOperTimeoutOccurred,
rttMonCtrlOperVerifyErrorOccurred,
rttMonCtrlOperOverThresholdOccurred,
rttMonCtrlOperNumRtts,
rttMonCtrlOperRttLife,
rttMonCtrlOperState,
rttMonLatestRttOperCompletionTime,
rttMonLatestRttOperSense,
rttMonLatestRttOperApplSpecificSense,
rttMonLatestRttOperSenseDescription,
rttMonLatestRttOperTime,
rttMonLatestRttOperAddress,
rttMonReactTriggerAdminStatus,
rttMonReactTriggerOperState
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing the Administration,
Operational, Last Statistical values for the RTT
Monitoring Application.
ciscoCtrlGroupRev10 object is superseded by
ciscoCtrlGroupRev28."
::= { ciscoRttMonMibGroups 24 }
ciscoCtrlGroupRev11 OBJECT-GROUP
OBJECTS {
rttMonReactVar,
rttMonReactThresholdType,
rttMonReactActionType,
rttMonReactThresholdRising,
rttMonReactThresholdFalling,
rttMonReactThresholdCountX,
rttMonReactThresholdCountY,
rttMonReactValue,
rttMonReactOccurred,
rttMonReactStatus,
rttMonGrpScheduleAdminFreqMax,
rttMonGrpScheduleAdminFreqMin
}
STATUS current
DESCRIPTION
"A collection of objects that were added
for the reaction configuration of probe."
::= { ciscoRttMonMibGroups 25 }
ciscoNotificationGroupRev1 NOTIFICATION-GROUP
NOTIFICATIONS { rttMonNotification }
STATUS current
DESCRIPTION
"A collection of notifications."
::= { ciscoRttMonMibGroups 26 }
ciscoCtrlGroupRev12 OBJECT-GROUP
OBJECTS {
rttMonEchoAdminSourceVoicePort,
rttMonEchoAdminCallDuration
}
STATUS current
DESCRIPTION
"A collection of objects that were added
for the configuration of rtp operation."
::= { ciscoRttMonMibGroups 27 }
ciscoCtrlGroupRev13 OBJECT-GROUP
OBJECTS {
rttMonEchoAdminLSPReplyDscp,
rttMonEchoAdminLSPNullShim,
rttMplsVpnMonCtrlLpd,
rttMplsVpnMonCtrlLpdGrpList,
rttMplsVpnMonCtrlLpdCompTime,
rttMplsVpnMonTypeLSPReplyDscp,
rttMplsVpnMonTypeLpdMaxSessions,
rttMplsVpnMonTypeLpdSessTimeout,
rttMplsVpnMonTypeLpdEchoTimeout,
rttMplsVpnMonTypeLpdEchoInterval,
rttMplsVpnMonTypeLpdEchoNullShim,
rttMplsVpnMonTypeLpdScanPeriod,
rttMplsVpnMonTypeLpdStatHours,
rttMplsVpnMonReactLpdNotifyType,
rttMplsVpnMonReactLpdRetryCount
}
STATUS current
DESCRIPTION
"A collection of objects that were added
for the parameters configuration of mpls based operations."
::= { ciscoRttMonMibGroups 29 }
ciscoStatsGroupRev7 OBJECT-GROUP
OBJECTS {
rttMonLpdGrpStatsTargetPE,
rttMonLpdGrpStatsNumOfPass,
rttMonLpdGrpStatsNumOfFail,
rttMonLpdGrpStatsNumOfTimeout,
rttMonLpdGrpStatsAvgRTT,
rttMonLpdGrpStatsMinRTT,
rttMonLpdGrpStatsMaxRTT,
rttMonLpdGrpStatsMinNumPaths,
rttMonLpdGrpStatsMaxNumPaths,
rttMonLpdGrpStatsLPDStartTime,
rttMonLpdGrpStatsLPDFailOccurred,
rttMonLpdGrpStatsLPDFailCause,
rttMonLpdGrpStatsLPDCompTime,
rttMonLpdGrpStatsGroupStatus,
rttMonLpdGrpStatsGroupProbeIndex,
rttMonLpdGrpStatsProbeStatus,
rttMonLpdGrpStatsPathIds,
rttMonLpdGrpStatsResetTime
}
STATUS current
DESCRIPTION
"A collection of objects that are added for
collecting the statistics for LSP Path Discovery Group."
::= { ciscoRttMonMibGroups 30 }
ciscoNotificationGroupRev2 NOTIFICATION-GROUP
NOTIFICATIONS {
rttMonLpdDiscoveryNotification,
rttMonLpdGrpStatusNotification
}
STATUS current
DESCRIPTION
"A collection of notifications added for supporting LSP
Path Discovery."
::= { ciscoRttMonMibGroups 31 }
ciscoApplGroupRev4 OBJECT-GROUP
OBJECTS { rttMonApplLpdGrpStatsReset }
STATUS current
DESCRIPTION
"This object is added to reset the LSP Path Discovery Stats."
::= { ciscoRttMonMibGroups 32 }
ciscoCtrlGroupRev14 OBJECT-GROUP
OBJECTS {
rttMonGrpScheduleAdminStartTime,
rttMonGrpScheduleAdminAdd,
rttMonGrpScheduleAdminDelete,
rttMonGrpScheduleAdminReset
}
STATUS current
DESCRIPTION
"This object is added for group scheduler enhancement"
::= { ciscoRttMonMibGroups 33 }
ciscoCtrlGroupRev15 OBJECT-GROUP
OBJECTS {
rttMonEchoAdminTargetMPID,
rttMonEchoAdminTargetDomainName,
rttMonEchoAdminTargetVLAN,
rttMonEchoAdminEthernetCOS
}
STATUS current
DESCRIPTION
"These objects are added for Ethernet ping/jitter operation."
::= { ciscoRttMonMibGroups 34 }
ciscoRttMonObsoleteGroupRev1 OBJECT-GROUP
OBJECTS {
rttMonApplPreConfigedReset,
rttMonApplPreConfigedValid,
rttMonFileIOAdminFilePath,
rttMonFileIOAdminSize,
rttMonFileIOAdminAction,
rttMonScriptAdminName,
rttMonScriptAdminCmdLineParams
}
STATUS obsolete
DESCRIPTION
"A collection of all objects that are obsolete."
::= { ciscoRttMonMibGroups 35 }
ciscoRttMonDeprecatedGroupRev1 OBJECT-GROUP
OBJECTS {
rttMonJitterStatsOWMinSD,
rttMonJitterStatsOWMaxSD,
rttMonJitterStatsOWMinDS,
rttMonJitterStatsOWMaxDS,
rttMonReactAdminConnectionEnable,
rttMonReactAdminTimeoutEnable,
rttMonReactAdminThresholdType,
rttMonReactAdminThresholdFalling,
rttMonReactAdminThresholdCount,
rttMonReactAdminThresholdCount2,
rttMonReactAdminActionType,
rttMonReactAdminVerifyErrorEnable
}
STATUS deprecated
DESCRIPTION
"A collection of all objects that are deprecated.
ciscoRttMonDeprecatedGroupRev1 object is superseded by
ciscoCtrlGroupRev11."
::= { ciscoRttMonMibGroups 36 }
ciscoCtrlGroupRev16 OBJECT-GROUP
OBJECTS { rttMonEchoAdminLSPVccvID }
STATUS current
DESCRIPTION
"These objects are added for LSP Ping Pseudowire operation."
::= { ciscoRttMonMibGroups 37 }
ciscoCtrlGroupRev17 OBJECT-GROUP
OBJECTS { rttMonCtrlAdminGroupName }
STATUS current
DESCRIPTION
"This object is added for IP SLA Auto Measure project."
::= { ciscoRttMonMibGroups 38 }
ciscoCtrlGroupRev18 OBJECT-GROUP
OBJECTS { rttMonEchoAdminTargetEVC }
STATUS current
DESCRIPTION
"This object is added for Ethernet ping/jitter operation."
::= { ciscoRttMonMibGroups 39 }
ciscoCtrlGroupRev19 OBJECT-GROUP
OBJECTS { rttMonEchoAdminTargetMEPPort }
STATUS current
DESCRIPTION
"This object is added for Ethernet ping/jitter operation."
::= { ciscoRttMonMibGroups 41 }
ciscoStatsGroupRev8 OBJECT-GROUP
OBJECTS {
rttMonLatestJitterOperRTTSumHigh,
rttMonLatestJitterOperRTTSum2High,
rttMonLatestJitterOperOWSumSDHigh,
rttMonLatestJitterOperOWSum2SDHigh,
rttMonLatestJitterOperOWSumDSHigh,
rttMonLatestJitterOperOWSum2DSHigh,
rttMonJitterStatsRTTSumHigh,
rttMonJitterStatsOWSumSDHigh,
rttMonJitterStatsOWSumDSHigh
}
STATUS current
DESCRIPTION
"A collection of objects that were added to store the high order
32 bits of RTT and one way latency statistics for 'jitter'
probe."
::= { ciscoRttMonMibGroups 40 }
ciscoCtrlGroupRev20 OBJECT-GROUP
OBJECTS { rttMonEchoAdminVideoTrafficProfile }
STATUS current
DESCRIPTION
"This object has been added for video operation."
::= { ciscoRttMonMibGroups 43 }
ciscoCtrlGroupRev21 OBJECT-GROUP
OBJECTS {
rttMonEchoAdminDscp,
rttMonEchoAdminReserveDsp,
rttMonEchoAdminInputInterface
}
STATUS current
DESCRIPTION
"This object has been added to support of DSCP marking, sender
DSP reservation, and source interface for path congruence in
video operation."
::= { ciscoRttMonMibGroups 44 }
ciscoCtrlGroupRev22 OBJECT-GROUP
OBJECTS {
rttMonEchoAdminEmulateSourceAddress,
rttMonEchoAdminEmulateSourcePort,
rttMonEchoAdminEmulateTargetAddress,
rttMonEchoAdminEmulateTargetPort
}
STATUS current
DESCRIPTION
"This object has been added to support of emulate source
address, emulate source port, emulate target address and emulate
target port for path congruence in video operation."
::= { ciscoRttMonMibGroups 45 }
ciscoCtrlGroupRev23 OBJECT-GROUP
OBJECTS {
rttMonEchoAdminTargetMacAddress,
rttMonEchoAdminSourceMacAddress,
rttMonEchoAdminSourceMPID
}
STATUS current
DESCRIPTION
"This group contains objects describing Y1731
operation."
::= { ciscoRttMonMibGroups 46 }
ciscoCtrlGroupRev24 OBJECT-GROUP
OBJECTS { rttMonGeneratedOperCtrlAdminIndex }
STATUS current
DESCRIPTION
"This object has been added to for Generated Oper Table."
::= { ciscoRttMonMibGroups 47 }
ciscoCtrlGroupRev25 OBJECT-GROUP
OBJECTS {
rttMonEchoAdminEndPointListName,
rttMonEchoAdminSSM,
rttMonEchoAdminControlRetry,
rttMonEchoAdminControlTimeout,
rttMonEchoAdminIgmpTreeInit
}
STATUS current
DESCRIPTION
"This object has been added to support Multicast operation."
::= { ciscoRttMonMibGroups 48 }
ciscoStatsGroupRev2 OBJECT-GROUP
OBJECTS {
rttMonControlEnableErrors,
rttMonStatsRetrieveErrors
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing Multicast control
request information.
ciscoStatsGroupRev2 object is superseded by
ciscoStatsGroupRev9."
::= { ciscoRttMonMibGroups 49 }
ciscoCtrlGroupRev26 OBJECT-GROUP
OBJECTS {
rttMonEchoAdminEnableBurst,
rttMonEchoAdminAggBurstCycles,
rttMonEchoAdminLossRatioNumFrames,
rttMonEchoAdminAvailNumFrames
}
STATUS current
DESCRIPTION
"New rttMonObjects related to the support of Y1731 Synthetic
Loss Measurement."
::= { ciscoRttMonMibGroups 50 }
ciscoCtrlGroupRev27 OBJECT-GROUP
OBJECTS { rttMonEchoAdminTstampOptimization }
STATUS current
DESCRIPTION
"The object is added to utilize lower layer (Hardware/Packet
Processor) timestamping for improving accuracy of jitter probe
statistics.
Currently the object is supported for udp jitter operations."
::= { ciscoRttMonMibGroups 51 }
ciscoCtrlGroupRev28 OBJECT-GROUP
OBJECTS {
rttMonCtrlAdminOwner,
rttMonCtrlAdminTag,
rttMonCtrlAdminRttType,
rttMonCtrlAdminThreshold,
rttMonCtrlAdminFrequency,
rttMonCtrlAdminTimeout,
rttMonCtrlAdminVerifyData,
rttMonCtrlAdminStatus,
rttMonCtrlAdminNvgen,
rttMonEchoAdminProtocol,
rttMonEchoAdminTargetAddress,
rttMonEchoAdminPktDataRequestSize,
rttMonEchoAdminPktDataResponseSize,
rttMonScheduleAdminRttLife,
rttMonScheduleAdminRttStartTime,
rttMonStatisticsAdminNumHourGroups,
rttMonStatisticsAdminNumPaths,
rttMonStatisticsAdminNumHops,
rttMonStatisticsAdminNumDistBuckets,
rttMonStatisticsAdminDistInterval,
rttMonHistoryAdminNumLives,
rttMonHistoryAdminNumBuckets,
rttMonHistoryAdminNumSamples,
rttMonHistoryAdminFilter,
rttMonCtrlOperModificationTime,
rttMonCtrlOperDiagText,
rttMonCtrlOperResetTime,
rttMonCtrlOperOctetsInUse,
rttMonCtrlOperConnectionLostOccurred,
rttMonCtrlOperTimeoutOccurred,
rttMonCtrlOperVerifyErrorOccurred,
rttMonCtrlOperOverThresholdOccurred,
rttMonCtrlOperNumRtts,
rttMonCtrlOperRttLife,
rttMonCtrlOperState,
rttMonLatestRttOperCompletionTime,
rttMonLatestRttOperSense,
rttMonLatestRttOperApplSpecificSense,
rttMonLatestRttOperSenseDescription,
rttMonLatestRttOperTime,
rttMonLatestRttOperAddress,
rttMonReactTriggerAdminStatus,
rttMonReactTriggerOperState,
rttMonScheduleAdminConceptRowAgeoutV2
}
STATUS current
DESCRIPTION
"A collection of objects providing the Administration,
Operational, Last Statistical values for the RTT
Monitoring Application.
Deprecated rttMonScheduleAdminConceptRowAgeout and added new
rttMonScheduleAdminConceptRowAgeoutV2 to consider 0 as default
age out value."
::= { ciscoRttMonMibGroups 52 }
ciscoStatsGroupRev9 OBJECT-GROUP
OBJECTS {
rttMonStatsCollectCtrlEnErrors,
rttMonStatsCollectRetrieveErrors
}
STATUS current
DESCRIPTION
"A collection of objects providing Multicast control request
information."
::= { ciscoRttMonMibGroups 53 }
ciscoCtrlGroupRev29 OBJECT-GROUP
OBJECTS {
rttMonEchoAdminTargetSwitchId,
rttMonEchoAdminProfileId,
rttMonEchoAdminOutputInterface
}
STATUS current
DESCRIPTION
"A collection of objects providing Fabric Path Echo probe
information."
::= { ciscoRttMonMibGroups 54 }
ciscoNotificationGroupRev3 NOTIFICATION-GROUP
NOTIFICATIONS { rttMonNotificationV2 }
STATUS current
DESCRIPTION
"Added notification rttMonNotificationV2 with the enhanced
rttMonCtrlAdminLongTag object"
::= { ciscoRttMonMibGroups 55 }
ciscoCtrlGroupRev30 OBJECT-GROUP
OBJECTS {
rttMonScheduleAdminStartType,
rttMonScheduleAdminStartDelay,
rttMonGrpScheduleAdminStartType,
rttMonGrpScheduleAdminStartDelay
}
STATUS current
DESCRIPTION
"Object added to support Random Start-Time feature for
group and sla probes."
::= { ciscoRttMonMibGroups 56 }
ciscoCtrlGroupRev31 OBJECT-GROUP
OBJECTS { rttMonCtrlAdminLongTag }
STATUS current
DESCRIPTION
"Object rttMonCtrlAdminLongTag added to enhance current
tag object for capturing long descriptions."
::= { ciscoRttMonMibGroups 57 }
ciscoStatsGroupRev10 OBJECT-GROUP
OBJECTS {
rttMonLatestJitterOperNumOverThresh,
rttMonJitterStatsNumOverThresh
}
STATUS current
DESCRIPTION
"A collection of objects providing over threshold statistics
for jitter probes."
::= { ciscoRttMonMibGroups 58 }
END
Reference in New Issue View Git Blame Copy Permalink