david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
main
mibs/MIBS/cisco/CISCO-STP-EXTENSIONS-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

5589 lines
192 KiB
Plaintext
Raw Permalink Blame History

-- *****************************************************************
-- CISCO-STP-EXTENSIONS-MIB
--
-- August 1997, Fei Xu
--
-- Copyright (c) 1997-2014, 2017 by Cisco Systems Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-STP-EXTENSIONS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
Integer32,
Unsigned32,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TruthValue,
TimeStamp,
DisplayString,
RowStatus,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
dot1dStpPortEntry
FROM BRIDGE-MIB
vlanTrunkPortEntry,
VlanIndex,
vtpVlanEntry,
vtpVlanEditEntry
FROM CISCO-VTP-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoStpExtensionsMIB MODULE-IDENTITY
LAST-UPDATED "201708240000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wbu@cisco.com"
DESCRIPTION
"The MIB module for managing Cisco extensions to
the 802.1D Spanning Tree Protocol (STP)."
REVISION "201708240000Z"
DESCRIPTION
"Added stpxMstInconsistencyTable & stpxMstInconsistencyUpdate."
REVISION "201407100000Z"
DESCRIPTION
"Added stpxL2GatewayDomainIdGroup.
Added a new value network(3) to stpxFastStartGlobalDefaultMode.
Added a new value network(3) to stpxFastStartOperMode."
REVISION "201303070000Z"
DESCRIPTION
"Added one new value network(5) to stpxFastStartPortMode."
REVISION "200512200000Z"
DESCRIPTION
"Added bit value rstp(5) to stpxSMSTPortStatus and
dispute(4) to stpxRPVSTPortStatus."
REVISION "200504120000Z"
DESCRIPTION
"Changed the description clauses of stpxMSTMaxHopCount
and stpxMSTInstanceRemainingHopCount.
Added StpxMSTConfigurationDigest textual convention.
Deprecated stpxMSTGroup3 and added the following groups:
stpxRSTPTransmitHoldCountGroup,
stpxSMSTPortMSTModeGroup, stpxSMSTMaxHopCountGroup,
stpxSMSTConfigDigestGroup and stpxMSTGroup4.
Added bit dispute(4) into the BITS syntax of
stpxSMSTPortStatus.
Deprecated stpxMIBCompliance11 and added
stpxMIBCompliance12."
REVISION "200407210000Z"
DESCRIPTION
"Added stpxPathCostOperModeGroup
and changed the decription of
stpxSpanningTreePathCostMode."
REVISION "200404080000Z"
DESCRIPTION
"Added stpxSMSTInstanceCISTGroup.
Added 3 new bit values into the BITS syntax
of stpxNotificationEnable:
inconsistency(2), rootInconsistency(3),
and loopInconsistency(4)."
REVISION "200401140000Z"
DESCRIPTION
"Deprecated stpxMSTGroup2 and
stpxPreferredMSTInstancesGroup.
Added stpxMSTGroup3, stpxSMSTGroup,
stpxSMSTInstanceGroup, stpxSMSTInstanceEditGroup,
stpxSMSTPortStatusGroup, stpxSMSTPortHelloTimeGroup.
Added one new value master(7) to stpxMSTPortRoleValue
and stpxRSTPPortRoleValue. Added 2 new unused bit
value into the BITS syntax of stpxRPVSTPortStatus."
REVISION "200310230000Z"
DESCRIPTION
"Added stpxExtendedSysIDGroup,
stpxNotificationEnableGroup, and
stpxFastStartOperModeGroup."
REVISION "200207110000Z"
DESCRIPTION
"Added Rapid Spanning Tree Protocol support.
Added stpxUplinkFastOperEnabled and
stpxBackboneFastOperEnabled objects.
Replaced stpxMSTPortAdminLinkType,
stpxMSTPortOperLinkType,
stpxMSTPortProtocolMigration
with stpxRSTPPortAdminLinkType,
stpxRSTPPortOperLinkType and
stpxRSTPPortProtocolMigration
defined in stpxRSTPPortTable.
Replaced stpxMSTPortRoleTable with
stpxRSTPPortRoleTable. Added stpxRPVSTPortTable."
REVISION "200112060000Z"
DESCRIPTION
"Added per port Bpdu Guard and Bpdu Filter
mode configuration support. Modified the
description of stpxUplinkFastEnabled and
stpxUplinkStationLearningGenRate for MST
support."
REVISION "200109140000Z"
DESCRIPTION
"Added MST support, Loop Guard Global Default mode
support and Fast Start Global Default mode support.
Deprecated stpxFastStartPortEnable and
stpxLoopGuardConfigEnabled objects. Changed description
of stpxUplinkFastEnabled, stpxUplinkFastTransitions,
stpxUplinkStationLearningGenRate,
stpxUplinkStationLearningFrames objects for MST support."
REVISION "200106200000Z"
DESCRIPTION
"Added BPDU Skewing feature support and modified
the SYNTAX clause of stpxUplinkStationLearningGenRate."
REVISION "200104120000Z"
DESCRIPTION
"Added PVST+ VLAN Configuration, MISTP to VLAN mapping,
Loopguard, and Port Fast Start support."
REVISION "200005230000Z"
DESCRIPTION
"Added Long Spanning Tree Path Cost Mode support."
REVISION "200003210000Z"
DESCRIPTION
"Added Rootguard, 4k VLAN and MISTP support."
REVISION "9711101200Z"
DESCRIPTION
"Additional objects to support SSTP."
REVISION "9708191200Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 82 }
stpxObjects OBJECT IDENTIFIER
::= { ciscoStpExtensionsMIB 1 }
stpxUplinkFastObjects OBJECT IDENTIFIER
::= { stpxObjects 1 }
stpxVlanObjects OBJECT IDENTIFIER
::= { stpxObjects 2 }
stpxInconsistencyObjects OBJECT IDENTIFIER
::= { stpxObjects 3 }
stpxBackboneFastObjects OBJECT IDENTIFIER
::= { stpxObjects 4 }
stpxRootGuardObjects OBJECT IDENTIFIER
::= { stpxObjects 5 }
stpxSpanningTreeObjects OBJECT IDENTIFIER
::= { stpxObjects 6 }
stpxMISTPObjects OBJECT IDENTIFIER
::= { stpxObjects 7 }
stpxLoopGuardObjects OBJECT IDENTIFIER
::= { stpxObjects 8 }
stpxFastStartObjects OBJECT IDENTIFIER
::= { stpxObjects 9 }
stpxBpduSkewingObjects OBJECT IDENTIFIER
::= { stpxObjects 10 }
stpxMSTObjects OBJECT IDENTIFIER
::= { stpxObjects 11 }
stpxRSTPObjects OBJECT IDENTIFIER
::= { stpxObjects 12 }
stpxRPVSTObjects OBJECT IDENTIFIER
::= { stpxObjects 13 }
stpxSMSTObjects OBJECT IDENTIFIER
::= { stpxObjects 14 }
stpxL2GatewayObjects OBJECT IDENTIFIER
::= { stpxObjects 16 }
stpxNotifications OBJECT IDENTIFIER
::= { ciscoStpExtensionsMIB 2 }
-- Textual Conventions
StpxMSTConfigurationDigest ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x"
STATUS current
DESCRIPTION
"Represents an MST configuration digest."
SYNTAX OCTET STRING (SIZE (16))
-- UplinkFast capability
stpxUplinkFastEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the UplinkFast capability is
administratively enabled on the device.
If the platform does not support configuration of this
object when the object value of stpxSpanningTreeType is
mst(4), then this object is not instantiated."
::= { stpxUplinkFastObjects 1 }
stpxUplinkFastTransitions OBJECT-TYPE
SYNTAX Counter32
UNITS "transitions"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cumulative number of UplinkFast transitions (from
the STP 'Blocking' state directly to the STP 'Forwarding'
state). All transitions are included in this counter,
irrespective of the instance of the Spanning Tree
Protocol on which they occur.
If the platform supports the stpxUplinkFastOperEnabled
object, then this object is not instantiated when the
object value of stpxUplinkFastOperEnabled is false(2).
If the platform does not support the
stpxUplinkFastOperEnabled object, then this object is
not instantiated when the object value of
stpxSpanningTreeType is mst(4)."
::= { stpxUplinkFastObjects 2 }
stpxUplinkStationLearningGenRate OBJECT-TYPE
SYNTAX Integer32 (0..32000)
UNITS "frames"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of station-learning frames that this
device will generate in each 100 milli-second period after
a UplinkFast transition. By configuring this object, the
network administrator can limit the rate at which
station-learning frames are generated.
If the platform does not support configuration of this
object when the object value of stpxSpanningTreeType is
mst(4), then this object is not instantiated."
::= { stpxUplinkFastObjects 3 }
stpxUplinkStationLearningFrames OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cumulative number of station-learning frames generated
due to UplinkFast transitions. All generated
station-learning frames are included in this counter,
irrespective of the instance of the Spanning Tree Protocol
on which the UplinkFast transition occurred.
If the platform supports the stpxUplinkFastOperEnabled
object, then this object is not instantiated when the
object value of stpxUplinkFastOperEnabled is false(2).
If the platform does not support the
stpxUplinkFastOperEnabled object, then this object is
not instantiated when the object value of
stpxSpanningTreeType is mst(4)."
::= { stpxUplinkFastObjects 4 }
stpxUplinkFastOperEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether the UplinkFast capability is
operationally enabled on the device."
::= { stpxUplinkFastObjects 5 }
-- Preferred VLANs for Load-Sharing across VLAN Trunk Ports
stpxPreferredVlansTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxPreferredVlansEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing indications of which VLANs are
preferred on which VLAN trunk ports. The preferred
VLANs on a trunk port have a lower Path Cost value
compared with the VLANs on the trunk not in the
preferred list. If the value of stpxSpanningTreeType
is neither pvstPlus(1) nor rapidPvstPlus(5), the
configuration in this table has no effect."
::= { stpxVlanObjects 1 }
stpxPreferredVlansEntry OBJECT-TYPE
SYNTAX StpxPreferredVlansEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry indicating which VLANs are preferred on a
specific VLAN trunk port."
AUGMENTS { vlanTrunkPortEntry }
::= { stpxPreferredVlansTable 1 }
StpxPreferredVlansEntry ::= SEQUENCE {
stpxPreferredVlansMap OCTET STRING,
stpxPreferredVlansMap2k OCTET STRING,
stpxPreferredVlansMap3k OCTET STRING,
stpxPreferredVlansMap4k OCTET STRING
}
stpxPreferredVlansMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN in the
management domain on this trunk port. The first octet
corresponds to VLANs with VlanIndex values of 0 through 7;
the second octet to VLANs 8 through 15; etc. The most
significant bit of each octet corresponds to the lowest
value VlanIndex in that octet.
For each VLAN, if it is preferred on this trunk port, then
the bit corresponding to that VLAN is set to '1'.
The default value is 128 bytes of zeros.
To avoid conflicts between overlapping partial updates by
multiple managers, i.e., updates which modify only a portion
of an instance of this object (e.g., enable/disable a single
VLAN on the trunk port), any SNMP Set operation accessing an
instance of this object should also write the value of
vlanTrunkPortSetSerialNo."
::= { stpxPreferredVlansEntry 1 }
stpxPreferredVlansMap2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for VLANS
with VlanIndex values of 1024 through 2047 in the management
domain on this trunk port. The first octet corresponds to
VLANs with VlanIndex values of 1024 through 1031;
the second octet to VLANs 1032 through 1039; etc.
The most significant bit of each octet corresponds to the
lowest value VlanIndex in that octet.
For each VLAN, if it is preferred on this trunk port, then
the bit corresponding to that VLAN is set to '1'.
The default value is 128 bytes of zeros.
To avoid conflicts between overlapping partial updates by
multiple managers, i.e., updates which modify only a portion
of an instance of this object (e.g., enable/disable a single
VLAN on the trunk port), any SNMP Set operation accessing an
instance of this object should also write the value of
vlanTrunkPortSetSerialNo."
::= { stpxPreferredVlansEntry 2 }
stpxPreferredVlansMap3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for VLANS
with VlanIndex values of 2048 through 3071 in the management
domain on this trunk port. The first octet corresponds to
VLANs with VlanIndex values of 2048 through 2055;
the second octet to VLANs 2056 through 2063; etc.
The most significant bit of each octet corresponds to the
lowest value VlanIndex in that octet.
For each VLAN, if it is preferred on this trunk port, then
the bit corresponding to that VLAN is set to '1'.
The default value is 128 bytes of zeros.
To avoid conflicts between overlapping partial updates by
multiple managers, i.e., updates which modify only a portion
of an instance of this object (e.g., enable/disable a single
VLAN on the trunk port), any SNMP Set operation accessing an
instance of this object should also write the value of
vlanTrunkPortSetSerialNo."
::= { stpxPreferredVlansEntry 3 }
stpxPreferredVlansMap4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for VLANS
with VlanIndex values of 3072 through 4095 in the management
domain on this trunk port. The first octet corresponds to
VLANs with VlanIndex values of 3072 through 3079;
the second octet to VLANs 3080 through 3087; etc.
The most significant bit of each octet corresponds to the
lowest value VlanIndex in that octet.
For each VLAN, if it is preferred on this trunk port, then
the bit corresponding to that VLAN is set to '1'.
The default value is 128 bytes of zeros.
To avoid conflicts between overlapping partial updates by
multiple managers, i.e., updates which modify only a portion
of an instance of this object (e.g., enable/disable a single
VLAN on the trunk port), any SNMP Set operation accessing an
instance of this object should also write the value of
vlanTrunkPortSetSerialNo."
::= { stpxPreferredVlansEntry 4 }
-- Spanning Tree Protocol PVST+ VLAN Configuration
stpxPVSTVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxPVSTVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Virtual LAN entries containing
information for Spanning Tree PVST+ protocol.
An entry will exist for each VLAN existing on
the device."
::= { stpxVlanObjects 2 }
stpxPVSTVlanEntry OBJECT-TYPE
SYNTAX StpxPVSTVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Spanning Tree PVST+ Protocol
information for a particular Virtual LAN."
INDEX { stpxPVSTVlanIndex }
::= { stpxPVSTVlanTable 1 }
StpxPVSTVlanEntry ::= SEQUENCE {
stpxPVSTVlanIndex VlanIndex,
stpxPVSTVlanEnable INTEGER
}
stpxPVSTVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies the
Virtual LAN associated with this information."
::= { stpxPVSTVlanEntry 1 }
stpxPVSTVlanEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2),
notApplicable(3) -- read-only
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether Spanning Tree PVST+
Protocol is enabled for this Virtual LAN. If
Spanning Tree PVST+ Protocol is not supported
on this VLAN, then notApplicable(3) will be
returned while retrieving the object value for
this VLAN.
If the device only supports a single global
Spanning Tree PVST+ Protocol enable/disable
for all the existing VLANs, then the object
value assigned to this VLAN will be applied
to the object values of all the instances
in this table which do not have the value
of notApplicable(3).
If the value of stpxSpanningTreeType is neither
pvstPlus(1) nor rapidPvstPlus(5), then the value
of stpxPVSTVlanEnable for this VLAN can not be
changed."
DEFVAL { enabled }
::= { stpxPVSTVlanEntry 2 }
-- Objects to support Cisco's Shared Spanning Tree Protocol (SSTP).
stpxInconsistencyTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxInconsistencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing a list of the ports for which
a particular VLAN's Spanning Tree has been found to
have an inconsistency. Two types of inconsistency
are discovered: 1) an inconsistency where two different
port types have been plugged together; and 2) an
inconsistency where different switches have different
PVIDs for the same link."
::= { stpxInconsistencyObjects 1 }
stpxInconsistencyEntry OBJECT-TYPE
SYNTAX StpxInconsistencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A VLAN on a particular port for which a Spanning Tree
inconsistency is currently in effect."
INDEX {
stpxVlanIndex,
stpxPortIndex
}
::= { stpxInconsistencyTable 1 }
StpxInconsistencyEntry ::= SEQUENCE {
stpxVlanIndex VlanIndex,
stpxPortIndex Integer32,
stpxInconsistentState BITS
}
stpxVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN id of the VLAN."
::= { stpxInconsistencyEntry 1 }
stpxPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of dot1dBasePort (i.e. dot1dBridge.1.4)
for the bridge port."
REFERENCE "dot1dBasePort is defined in RFC1493."
::= { stpxInconsistencyEntry 2 }
stpxInconsistentState OBJECT-TYPE
SYNTAX BITS {
typeInconsistent(0),
pvidInconsistent(1) -- a PVID inconsistency
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The types of inconsistency which have been discovered on
this port for this VLAN's Spanning Tree.
When this object exists, the value of the corresponding
instance of the Bridge MIB's dot1dStpPortState object will
be 'broken(6)'."
REFERENCE "dot1dStpPortState is defined in RFC-1493."
::= { stpxInconsistencyEntry 3 }
stpxMstInconsistencyTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxMstInconsistencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table that contains a list of the bridge ports for which a
particular spanning tree instance has been found to have an
inconsistency. The agent creates a new entry in this table
whenever it detects a new inconsistency, and deletes entries
when the inconsistency is no longer present.
Two types of inconsistencies are discovered:
(1) the inconsistency when two different port types have been
plugged together.
(2) the inconsistency when different switches have different
PVIDs for the same link."
::= { stpxInconsistencyObjects 2 }
stpxMstInconsistencyEntry OBJECT-TYPE
SYNTAX StpxMstInconsistencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The instance of a particular port for which the spanning tree
inconsistency is currently in effect."
INDEX {
stpxMstInconsistencyIndex,
stpxMstInconsistencyPortIndex
}
::= { stpxMstInconsistencyTable 1 }
StpxMstInconsistencyEntry ::= SEQUENCE {
stpxMstInconsistencyIndex Integer32,
stpxMstInconsistencyPortIndex Integer32,
stpxMstInconsistencyState BITS
}
stpxMstInconsistencyIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Spanning Tree Instance ID, such as the MST instance."
::= { stpxMstInconsistencyEntry 1 }
stpxMstInconsistencyPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of dotdBasePort (i.e. dot1dBridge.1.4) for the bridge
port."
::= { stpxMstInconsistencyEntry 2 }
stpxMstInconsistencyState OBJECT-TYPE
SYNTAX BITS {
typeInconsistent(0),
pvidInconsistent(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of inconsistency which has been discovered on
this port for this Spanning Tree.
When this object exists, the value of the corresponding
instance of the Bridge MIB's dot1dStpPortState object will
be 'broken(6)'."
REFERENCE "dot1dStpPortState is defined in RFC-1493."
::= { stpxMstInconsistencyEntry 3 }
-- BackboneFast capability
stpxBackboneFastEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the BackboneFast capability is
administratively enabled on the device."
::= { stpxBackboneFastObjects 1 }
stpxBackboneFastInInferiorBPDUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inferior BPDUs received by the switch
since the stpxBackboneFastOperEnabled has
become true(1). If the value of
stpxBackboneFastOperEnabled is false(2), then this
mib object will have a value of 0."
::= { stpxBackboneFastObjects 2 }
stpxBackboneFastInRLQRequestPDUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Root Link Query request PDUs received by the
switch since the stpxBackboneFastOperEnabled has become
true(1). If the value of stpxBackboneFastOperEnabled is
false(2), then this mib object will have a value of 0."
::= { stpxBackboneFastObjects 3 }
stpxBackboneFastInRLQResponsePDUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Root Link Query response PDUs received by the
switch since the stpxBackboneFastOperEnabled has become
true(1). If the value of stpxBackboneFastOperEnabled is
false(2), then this mib object will have a value of 0."
::= { stpxBackboneFastObjects 4 }
stpxBackboneFastOutRLQRequestPDUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Root Link Query request PDUs transmitted by
the switch since the stpxBackboneFastOperEnabled has become
true(1). If the value of stpxBackboneFastOperEnabled is
false(2), then this mib object will have a value of 0."
::= { stpxBackboneFastObjects 5 }
stpxBackboneFastOutRLQResponsePDUs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Root Link Query response PDUs transmitted by
the switch since the stpxBackboneFastOperEnabled has become
true(1). If the value of stpxBackboneFastOperEnabled is
false(2), then this mib object will have a value of 0."
::= { stpxBackboneFastObjects 6 }
stpxBackboneFastOperEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether the BackboneFast capability is
operationally enabled on the device."
::= { stpxBackboneFastObjects 7 }
-- STP Root Guard Capability
stpxRootGuardConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxRootGuardConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing a list of the bridge ports for which
Spanning Tree RootGuard capability can be configured."
::= { stpxRootGuardObjects 1 }
stpxRootGuardConfigEntry OBJECT-TYPE
SYNTAX StpxRootGuardConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A bridge port for which Spanning Tree RootGuard
capability can be configured."
INDEX { stpxRootGuardConfigPortIndex }
::= { stpxRootGuardConfigTable 1 }
StpxRootGuardConfigEntry ::= SEQUENCE {
stpxRootGuardConfigPortIndex Integer32,
stpxRootGuardConfigEnabled TruthValue
}
stpxRootGuardConfigPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of dot1dBasePort (i.e. dot1dBridge.1.4)
for the bridge port."
REFERENCE "dot1dBasePort is defined in RFC1493."
::= { stpxRootGuardConfigEntry 1 }
stpxRootGuardConfigEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the RootGuard capability is
enabled on this port or not. This configuration will be
applied to all Spanning Tree instances in which this port
exists."
DEFVAL { false }
::= { stpxRootGuardConfigEntry 2 }
stpxRootInconsistencyTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxRootInconsistencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing a list of the bridge ports for which
a particular Spanning Tree instance has been found
to have an root-inconsistency. The agent creates a new
entry in this table whenever it detects a new
root-inconsistency, and deletes entries
when/soon after the inconsistency is no longer present."
::= { stpxRootGuardObjects 2 }
stpxRootInconsistencyEntry OBJECT-TYPE
SYNTAX StpxRootInconsistencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Spanning Tree instance on a particular port for
which a Spanning Tree root-inconsistency is currently
in effect."
INDEX {
stpxRootInconsistencyIndex,
stpxRootInconsistencyPortIndex
}
::= { stpxRootInconsistencyTable 1 }
StpxRootInconsistencyEntry ::= SEQUENCE {
stpxRootInconsistencyIndex Integer32,
stpxRootInconsistencyPortIndex Integer32,
stpxRootInconsistencyState TruthValue
}
stpxRootInconsistencyIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Spanning Tree instance id, such as the VLAN id
of the VLAN if the object value of stpxSpanningTreeType
is pvstPlus(1) or rapidPvstPlus(5)."
::= { stpxRootInconsistencyEntry 1 }
stpxRootInconsistencyPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of dot1dBasePort (i.e. dot1dBridge.1.4)
for the bridge port."
REFERENCE "dot1dBasePort is defined in RFC1493."
::= { stpxRootInconsistencyEntry 2 }
stpxRootInconsistencyState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the port on a particular Spanning
Tree instance is currently in root-inconsistent
state or not."
::= { stpxRootInconsistencyEntry 3 }
-- stpxSpanningTreeObjects
stpxSpanningTreeType OBJECT-TYPE
SYNTAX INTEGER {
pvstPlus(1),
mistp(2),
mistpPvstPlus(3),
mst(4),
rapidPvstPlus(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The actual mode of spanning tree protocol runs
on the device. It can be one of the following:
pvstPlus -- PVST+ (Per VLAN Spanning Tree+ Protocol).
mistp -- MISTP (Multi Instance Spanning Tree Protocol).
mistpPvstPlus -- MISTP with the tunneling scheme
enabled for PVST+.
mst -- IEEE 802.1s Multiple Spanning Tree (MST)
with IEEE 802.1w Rapid Spanning Tree Protocol
(RSTP).
rapidPvstPlus -- IEEE 802.1w Rapid Spanning Tree
Protocol (RSTP) for all vlans in PVST+.
When the value of this MIB object gets changed, the
network connectivity would be affected and the
connectivity to this device would also be lost
temporarily."
DEFVAL { pvstPlus }
::= { stpxSpanningTreeObjects 1 }
stpxSpanningTreePathCostMode OBJECT-TYPE
SYNTAX INTEGER {
short(1), -- 16 bits spanning tree path
-- cost mode
long(2) -- 32 bits spanning tree path
-- cost mode
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the administrative spanning tree path cost mode
configured on device."
DEFVAL { short }
::= { stpxSpanningTreeObjects 2 }
stpxLongStpPortPathCostTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxLongStpPortPathCostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the spanning tree port path cost
configuration when stpxSpanningTreePathCostOperMode is
long(2).
If the value of stpxSpanningTreePathCostOperMode is
short(1), this table is not instantiated."
::= { stpxSpanningTreeObjects 3 }
stpxLongStpPortPathCostEntry OBJECT-TYPE
SYNTAX StpxLongStpPortPathCostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing the spanning tree port path cost
configuration."
AUGMENTS { dot1dStpPortEntry }
::= { stpxLongStpPortPathCostTable 1 }
StpxLongStpPortPathCostEntry ::= SEQUENCE {
stpxLongStpPortPathCost Unsigned32
}
stpxLongStpPortPathCost OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.
This object is used to configure the spanning tree port
path cost in 32 bits value range when the
stpxSpanningTreePathCostOperMode is long(2).
If the stpxSpanningTreePathCostOperMode is short(1), this
MIB object is not instantiated."
::= { stpxLongStpPortPathCostEntry 1 }
stpxExtendedSysIDAdminEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether Extended System ID feature
is administratively enabled on the device or not."
REFERENCE "IEEE 802.1t."
::= { stpxSpanningTreeObjects 4 }
stpxExtendedSysIDOperEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Extended System ID feature
is operationaly enabled on the device or not.
If the value of this object is true(1), then
the accepted values for dot1dStpPriority
in BRIDGE-MIB should be multiples of 4096 plus
bridge instance ID, such as VlanIndex. Changing
this object value might cause the values of
dot1dBaseBridgeAddress and dot1dStpPriority
in BRIDGE-MIB to be changed also."
REFERENCE "IEEE 802.1t."
::= { stpxSpanningTreeObjects 5 }
stpxNotificationEnable OBJECT-TYPE
SYNTAX BITS {
newRoot(0),
topologyChange(1),
inconsistency(2),
rootInconsistency(3),
loopInconsistency(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether a specified notification is enabled or not.
If a bit corresponding to a notification is set to 1, then
the specified notification can be generated.
newRoot -- the newRoot notification as defined in BRIDGE-MIB.
topologyChange -- the topologyChange notification as
defined in BRIDGE-MIB.
inconsistency -- the stpxInconsistencyUpdate notification.
rootInconsistency -- the stpxRootInconsistencyUpdate
notification.
loopInconsistency -- the stpxLoopInconsistencyUpdate
notification."
::= { stpxSpanningTreeObjects 6 }
stpxSpanningTreePathCostOperMode OBJECT-TYPE
SYNTAX INTEGER {
short(1), -- 16 bits spanning tree path
-- cost mode
long(2) -- 32 bits spanning tree path
-- cost mode
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the operational spanning tree path cost mode
on device. This mode applies to all instances of the Spanning
Tree protocol running on the device.
When the value of this MIB object gets changed, the path cost
of all ports will be reassigned to the default path cost
values based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is long(2),
the stpxLongStpPortPathCost MIB object must be used in order
to retrieve/configure the spanning tree port path cost as a
32 bits value. The set operation on dot1dStpPortPathCost in
BRIDGE-MIB will be rejected. While retrieving the value of
dot1dStpPortPathCost, the maximum value of 65535 will be
returned if the value of stpxLongStpPortPathCost for the same
instance exceeds 65535.
When the value of this MIB object is short(1),
the dot1dStpPortPathCost in BRIDGE-MIB must be used."
::= { stpxSpanningTreeObjects 7 }
-- MISTP Objects
stpxMISTPInstanceNumber OBJECT-TYPE
SYNTAX Integer32 (1..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MISTP instances, that are supported by the device
when the value of stpxSpanningTreeType is either mistp(2)
or mistpPvstPlus(3)."
::= { stpxMISTPObjects 1 }
-- When stpxSpanningTreeType is modified from a value of 'pvstPlus' to
-- either 'mistp' or 'mistpPvstPlus', the agent will create a fixed
-- number (specified in stpxMISTPInstanceNumber) of MISTP instances in
-- this table. When stpxSpanningTreeType is changed to 'pvstPlus', the
-- agent will delete all the MISTP instances from this table and also
-- all the MIB objects associated with them.
stpxMISTPInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxMISTPInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one entry for each instance of MISTP and
it contains stpxMISTPInstanceNumber entries, numbered from 1
to stpxMISTPInstanceNumber.
This table is only instantiated when the value of
stpxSpanningTreeType is mistp(2) or mistpPvstPlus(3)."
::= { stpxMISTPObjects 2 }
stpxMISTPInstanceEntry OBJECT-TYPE
SYNTAX StpxMISTPInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing the status of the MISTP
instance."
INDEX { stpxMISTPInstanceIndex }
::= { stpxMISTPInstanceTable 1 }
StpxMISTPInstanceEntry ::= SEQUENCE {
stpxMISTPInstanceIndex Integer32,
stpxMISTPInstanceEnable TruthValue,
stpxMISTPInstanceVlansMapped OCTET STRING,
stpxMISTPInstanceVlansMapped2k OCTET STRING,
stpxMISTPInstanceVlansMapped3k OCTET STRING,
stpxMISTPInstanceVlansMapped4k OCTET STRING
}
stpxMISTPInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (1..256)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
stpxMISTPInstanceNumber that uniquely identifies an instance."
::= { stpxMISTPInstanceEntry 1 }
stpxMISTPInstanceEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the MISTP protocol is currently
enabled on the MISTP instance.
If this object is set to
'true' - the MISTP protocol will run on this instance.
'false' - the MISTP protocol will stop running on this
instance."
DEFVAL { true }
::= { stpxMISTPInstanceEntry 2 }
stpxMISTPInstanceVlansMapped OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndex in that octet.
For each VLAN, if it is mapped to this MISTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= { stpxMISTPInstanceEntry 3 }
stpxMISTPInstanceVlansMapped2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
through 1039; etc. The most significant bit of each
octet corresponds to the lowest value VlanIndex in that
octet.
For each VLAN, if it is mapped to this MISTP instance,
then the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex up to 4095."
::= { stpxMISTPInstanceEntry 4 }
stpxMISTPInstanceVlansMapped3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The most significant bit of each
octet corresponds to the lowest value VlanIndex in that
octet.
For each VLAN, if it is mapped to this MISTP instance,
then the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex up to 4095."
::= { stpxMISTPInstanceEntry 5 }
stpxMISTPInstanceVlansMapped4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
through 3087; etc. The most significant bit of each
octet corresponds to the lowest value VlanIndex in that
octet.
For each VLAN, if it is mapped to this MISTP instance,
then the bit corresponding to that VLAN is set to '1'.
This object is only instantiated on devices with
support for VlanIndex up to 4095."
::= { stpxMISTPInstanceEntry 6 }
stpxVlanMISTPInstMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxVlanMISTPInstMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the MISTP Instance Index of the VLANs for a
particular management domain.
This table is only instantiated when the value of
stpxSpanningTreeType is mistp(2) or mistpPvstPlus(3)."
::= { stpxMISTPObjects 3 }
stpxVlanMISTPInstMapEntry OBJECT-TYPE
SYNTAX StpxVlanMISTPInstMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing the MISTP Instance Index of the
VLAN for a particular management domain."
AUGMENTS { vtpVlanEntry }
::= { stpxVlanMISTPInstMapTable 1 }
StpxVlanMISTPInstMapEntry ::= SEQUENCE {
stpxVlanMISTPInstMapInstIndex Integer32
}
stpxVlanMISTPInstMapInstIndex OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MISTP instance, to which the corresponding vlan is mapped.
If this value of this mib object is 0, the corresponding vlan
is not configured to be mapped to any MISTP instance and all
the ports under this VLAN remain in blocking state."
::= { stpxVlanMISTPInstMapEntry 1 }
stpxVlanMISTPInstMapEditTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxVlanMISTPInstMapEditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the MISTP related information for the VLANs
in the Edit Buffers for a particular management domain.
This table is only instantiated when when the value of
stpxSpanningTreeType is mistp(2) or mistpPvstPlus(3)."
::= { stpxMISTPObjects 4 }
stpxVlanMISTPInstMapEditEntry OBJECT-TYPE
SYNTAX StpxVlanMISTPInstMapEditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about one VLAN mapping to one instance
in the Edit Buffer for a particular management domain."
AUGMENTS { vtpVlanEditEntry }
::= { stpxVlanMISTPInstMapEditTable 1 }
StpxVlanMISTPInstMapEditEntry ::= SEQUENCE {
stpxVlanMISTPInstMapEditInstIndex Integer32
}
stpxVlanMISTPInstMapEditInstIndex OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MISTP instance, to which the corresponding vlan would be
mapped. The value of this mib object is from 0 to the value of
stpxMISTPInstanceNumber. If setting the value of this object
to 0, the corresponding vlan will not be mapped to a MISTP
instance and all the ports under this VLAN will be moved into
the blocking state."
::= { stpxVlanMISTPInstMapEditEntry 1 }
stpxPreferredMISTPInstancesTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxPreferredMISTPInstancesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing indications of which MISTP instances
are preferred on which trunk ports. The preferred
MISTP instances on a trunk port have a lower Path Cost value
compared with the MISTP instances on the trunk not in the
preferred list.
This table is only instantiated when the value of
stpxSpanningTreeType is mistp(2) or mistpPvstPlus(3)."
::= { stpxMISTPObjects 5 }
stpxPreferredMISTPInstancesEntry OBJECT-TYPE
SYNTAX StpxPreferredMISTPInstancesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry indicating which MISTP instances are preferred on
a specific trunk port."
AUGMENTS { vlanTrunkPortEntry }
::= { stpxPreferredMISTPInstancesTable 1 }
StpxPreferredMISTPInstancesEntry ::= SEQUENCE {
stpxPreferredMISTPInstancesMap OCTET STRING
}
stpxPreferredMISTPInstancesMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A string of octets containing one bit per MISTP instances
in the management domain on this trunk port. The first octet
corresponds to MISTP instances with InstIndex values of 1
through 8; the second octet to MISTP instances 9 through 16;
etc. The most significant bit of each octet corresponds to
the lowest value instanceIndex in that octet. The number of
bits for this mib object will be determined by the value of
stpxMISTPInstanceNumber.
For each instance, if it is preferred on this trunk port,
then the bit corresponding to that instance is set to '1'.
To avoid conflicts between overlapping partial updates by
multiple managers, i.e., updates which modify only a portion
of an instance of this object (e.g., enable/disable a single
instance on the trunk port), any SNMP Set operation
accessing an instance of this object should also write the
value of vlanTrunkPortSetSerialNo."
::= { stpxPreferredMISTPInstancesEntry 1 }
-- STP Loop Guard Capability
stpxLoopGuardConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxLoopGuardConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing a list of the bridge ports for which
Spanning Tree LoopGuard capability can be configured."
::= { stpxLoopGuardObjects 1 }
stpxLoopGuardConfigEntry OBJECT-TYPE
SYNTAX StpxLoopGuardConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A bridge port for which Spanning Tree LoopGuard
capability can be configured."
INDEX { stpxLoopGuardConfigPortIndex }
::= { stpxLoopGuardConfigTable 1 }
StpxLoopGuardConfigEntry ::= SEQUENCE {
stpxLoopGuardConfigPortIndex Integer32,
stpxLoopGuardConfigEnabled TruthValue,
stpxLoopGuardConfigMode INTEGER
}
stpxLoopGuardConfigPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of dot1dBasePort (i.e. dot1dBridge.1.4)
for the bridge port."
REFERENCE "dot1dBasePort is defined in RFC1493."
::= { stpxLoopGuardConfigEntry 1 }
stpxLoopGuardConfigEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"An indication of whether the LoopGuard capability is
enabled on this port or not. This configuration will be
applied to all the Spanning Tree instances in which this
port exists.
In order to support additional Loop Guard config mode
(default) as defined in stpxLoopGuardConfigMode other
than enable (true(1)) or disable (false(2)) as defined
in this object, stpxLoopGuardConfigMode object needs to
be used.
When the stpxLoopGuardConfigMode object has the value of
enable(1), the value of stpxLoopGuardConfigEnabled for
the same instance will be true(1). When the
stpxLoopGuardConfigMode object has the value of disable(2),
the value of stpxLoopGuardConfigEnabled for the same
instance will be false(2). When the stpxLoopGuardConfigMode
object has the value of default(3), the value of
stpxLoopGuardConfigEnabled for the same instance will
depend on the object value of
stpxLoopGuardGlobalDefaultMode."
DEFVAL { false }
::= { stpxLoopGuardConfigEntry 2 }
stpxLoopGuardConfigMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
default(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mode of Loop Guard Feature on this
port. This configuration will be applied to all
the Spanning Tree instances in which this port
exists.
enable -- the Loop Guard feature is enabled on this
port.
disable -- the Loop Guard feature is disabled on this
port.
default -- whether the Loop Guard feature is enabled
or not on this port depends on the object
value of stpxLoopGuardGlobalDefaultMode."
::= { stpxLoopGuardConfigEntry 3 }
stpxLoopInconsistencyTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxLoopInconsistencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing a list of the bridge ports for which
a particular Spanning Tree instance has been found
to have a loop-inconsistency. The agent creates a new
entry in this table whenever it detects a new
loop-inconsistency, and deletes entries
when/soon after the inconsistency is no longer present."
::= { stpxLoopGuardObjects 2 }
stpxLoopInconsistencyEntry OBJECT-TYPE
SYNTAX StpxLoopInconsistencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Spanning Tree instance on a particular port for
which a Spanning Tree loop-inconsistency is currently
in effect."
INDEX {
stpxLoopInconsistencyIndex,
stpxLoopInconsistencyPortIndex
}
::= { stpxLoopInconsistencyTable 1 }
StpxLoopInconsistencyEntry ::= SEQUENCE {
stpxLoopInconsistencyIndex Integer32,
stpxLoopInconsistencyPortIndex Integer32,
stpxLoopInconsistencyState TruthValue
}
stpxLoopInconsistencyIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Spanning Tree instance id, such as the VLAN id
of the VLAN if the object value of stpxSpanningTreeType
is pvstPlus(1) or rapidPvstPlus(5)."
::= { stpxLoopInconsistencyEntry 1 }
stpxLoopInconsistencyPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of dot1dBasePort (i.e. dot1dBridge.1.4)
for the bridge port."
REFERENCE "dot1dBasePort is defined in RFC1493."
::= { stpxLoopInconsistencyEntry 2 }
stpxLoopInconsistencyState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the port on a particular Spanning
Tree instance is currently in loop-inconsistent
state or not."
::= { stpxLoopInconsistencyEntry 3 }
stpxLoopGuardGlobalDefaultMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the global default config mode of LoopGuard
feature on the device."
::= { stpxLoopGuardObjects 3 }
-- Spanning Tree Port Fast Start Objects
stpxFastStartBpduGuardEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the global default mode of the Bpdu
Guard feature on the device.
On platforms that does not support per port
Bpdu Guard configuration as indicated by
the object stpxFastStartPortBpduGuardMode,
if the value of this object is set to true(1),
and the Fast Start Feature is operationally
enabled on a port, then that port will be
immediately disabled when the system receives
a BPDU from that port."
DEFVAL { false }
::= { stpxFastStartObjects 1 }
stpxFastStartBpduFilterEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the global default mode of the Bpdu
Filter feature on the device.
On platforms that does not support per port
Bpdu Filter configuration as indicated by
the object stpxFastStartPortBpduFilterMode,
if the value of this object is set to true(1),
and the Fast Start Feature is operationally
enabled on a port, then no BPDUs will be
transmitted on this port."
DEFVAL { false }
::= { stpxFastStartObjects 2 }
stpxFastStartPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxFastStartPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing a list of the bridge ports for
which Spanning Tree Port Fast Start can be
configured."
::= { stpxFastStartObjects 3 }
stpxFastStartPortEntry OBJECT-TYPE
SYNTAX StpxFastStartPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A bridge port for which Spanning Tree Port Fast
Start can be configured."
INDEX { stpxFastStartPortIndex }
::= { stpxFastStartPortTable 1 }
StpxFastStartPortEntry ::= SEQUENCE {
stpxFastStartPortIndex Integer32,
stpxFastStartPortEnable TruthValue,
stpxFastStartPortMode INTEGER,
stpxFastStartPortBpduGuardMode INTEGER,
stpxFastStartPortBpduFilterMode INTEGER
}
stpxFastStartPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of dot1dBasePort (i.e. dot1dBridge.1.4)
for the bridge port."
REFERENCE "dot1dBasePort is defined in RFC1493."
::= { stpxFastStartPortEntry 1 }
stpxFastStartPortEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Indicates whether the port is operating in spantree
fast start mode. A port with fast start enabled is
immediately put in spanning tree forwarding state when
that port is detected by the Spanning Tree, rather
than starting in blocking state which is the normal
operation.
In order to support additional Fast Start enable mode
(enableForTrunk and default) as defined in
stpxFastStartPortMode other than enable (true(1))
or disable (false(2)) as defined in this object,
stpxFastStartPortMode object needs to be used.
When the stpxFastStartPortMode has the value of
enable(1) or enableForTrunk(3), the value of
stpxFastStartPortEnable for the same instance
will be true(1). When the stpxFastStartPortMode
has the value of disable(2), the value of
stpxFastStartPortEnable for the same instance will be
false(2). When the stpxFastStartPortMode has the value
of default(4), the value of stpxFastStartPortEnable for
the same instance depends on the object value of
stpxFastStartGlobalDefaultMode."
DEFVAL { false }
::= { stpxFastStartPortEntry 2 }
stpxFastStartPortMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
enableForTrunk(3),
default(4),
network(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mode of Fast Start Feature on the
port. A port with fast start enabled is immediately
put in spanning tree forwarding state when the port
is detected by the Spanning Tree, rather than
starting in blocking state which is the normal
operation.
enable -- the fast start feature is enabled on this
port but will only take effect when the
object value of its
vlanTrunkPortDynamicStatus as specified
in CISCO-VTP-MIB is notTrunking(2).
disable -- the fast start feature is disabled on this
port.
enableForTrunk -- the fast start feature is enabled
on this port and will take effect
regardless of the object value of
its vlanTrunkPortDynamicStatus.
default -- whether the fast start feature is enabled
or not on this port depends on the object
value of stpxFastStartGlobalDefaultMode.
network -- the network mode is enabled on this
port."
::= { stpxFastStartPortEntry 3 }
stpxFastStartPortBpduGuardMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
default(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mode of Bpdu Guard Feature on the
port. A port with Bpdu Guard enabled is
immediately disabled when the system
receives a BPDU from that port.
enable -- the Bpdu Guard feature is enabled on this
port.
disable -- the Bpdu Guard feature is disabled on this
port.
default -- whether the Bpdu Guard feature is enabled
or not on this port depends on the object
value of stpxFastStartBpduGuardEnable. If
the value of stpxFastStartBpduGuardEnable
is true(1) and Fast Start feature is also
enabled operationally on this port, then
this port is immediately disabled when
the system receives a BPDU from this port."
DEFVAL { default }
::= { stpxFastStartPortEntry 4 }
stpxFastStartPortBpduFilterMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
default(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mode of Bpdu Filter Feature on the
port. The system will not transmit BPDUs on a port
with Bpdu Filter feature enabled.
enable -- the Bpdu Filter feature is enabled on this
port.
disable -- the Bpdu Filter feature is disabled on this
port.
default -- whether the Bpdu Filter feature is enabled
or not on this port depends on the object
value of stpxFastStartBpduFilterEnable. If
the value of stpxFastStartBpduFilterEnable
is true(1) and Fast Start feature is also
enabled operationally on this port, then
no BPDUs will be transmitted on this port."
DEFVAL { default }
::= { stpxFastStartPortEntry 5 }
stpxFastStartGlobalDefaultMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
network(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the global default mode of the Fast
Start feature on the device.
enable -- the fast start feature is enabled and
the default port mode is edge mode.
disable -- the fast start feature is disabled.
network -- the default port mode is network mode."
DEFVAL { disable }
::= { stpxFastStartObjects 4 }
stpxFastStartOperModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxFastStartOperModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing a list of the bridge ports
for a particular Spanning Tree Instance."
::= { stpxFastStartObjects 5 }
stpxFastStartOperModeEntry OBJECT-TYPE
SYNTAX StpxFastStartOperModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry with port fast start oper mode
information on a bridge port for a particular
Spanning Tree Instance."
INDEX {
stpxFastStartOperModeInstIndex,
stpxFastStartOperModePortIndex
}
::= { stpxFastStartOperModeTable 1 }
StpxFastStartOperModeEntry ::= SEQUENCE {
stpxFastStartOperModeInstIndex Integer32,
stpxFastStartOperModePortIndex Integer32,
stpxFastStartOperMode INTEGER
}
stpxFastStartOperModeInstIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Spanning Tree instance id, such as the VLAN id
of the VLAN if the object value of stpxSpanningTreeType
is pvstPlus(1)."
::= { stpxFastStartOperModeEntry 1 }
stpxFastStartOperModePortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of dot1dBasePort (i.e. dot1dBridge.1.4)
for the bridge port."
REFERENCE "dot1dBasePort is defined in RFC1493."
::= { stpxFastStartOperModeEntry 2 }
stpxFastStartOperMode OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2),
network(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the fast start operational status of the
port on a particular Spanning Tree Instance.
enable -- the fast start feature is operationally
enabled on this port and the port is in
edge mode.
disable -- the fast start feature is operationally
disabled on this port.
network -- the port is in network mode."
::= { stpxFastStartOperModeEntry 3 }
-- BPDU Skewing Feature
stpxBpduSkewingDetectionEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether BPDU skewing detection feature
is enabled or not on the system. If this object has
the value of true(1), then the system will detect
whether BPDUs received by any port on any Spanning
Tree instance are processed at an interval longer
than the object value of dot1dStpHelloTime in the
BIRDGE-MIB of the Spanning Tree instance."
DEFVAL { false }
::= { stpxBpduSkewingObjects 1 }
stpxBpduSkewingTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxBpduSkewingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing a list of the bridge ports for
which a particular Spanning Tree instance has been
detected to have BPDU skewing occurred since the
object value of stpxBpduSkewingDetectionEnable was
last changed to true(1).
The agent creates a new entry in this table whenever
a port in a particular Spanning Tree instance is
detected to be BPDU skewed since the object value of
stpxBpduSkewingDetectionEnable object is changed to
true(1). The agent deletes all the entries in this
table when the object value of
stpxBpduSkewingDetectionEnable is changed to false(2)
or the object value of stpxSpanningTreeType is
changed."
::= { stpxBpduSkewingObjects 2 }
stpxBpduSkewingEntry OBJECT-TYPE
SYNTAX StpxBpduSkewingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Spanning Tree instance on a particular port for
which BPDU skewing has been detected."
INDEX {
stpxBpduSkewingInstanceIndex,
stpxBpduSkewingPortIndex
}
::= { stpxBpduSkewingTable 1 }
StpxBpduSkewingEntry ::= SEQUENCE {
stpxBpduSkewingInstanceIndex Integer32,
stpxBpduSkewingPortIndex Integer32,
stpxBpduSkewingLastSkewDuration Unsigned32,
stpxBpduSkewingWorstSkewDuration Unsigned32,
stpxBpduSkewingWorstSkewTime TimeStamp
}
stpxBpduSkewingInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Spanning Tree instance id, such as the VLAN id
of the VLAN if the object value of stpxSpanningTreeType
is pvstPlus(1)."
::= { stpxBpduSkewingEntry 1 }
stpxBpduSkewingPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of dot1dBasePort (i.e. dot1dBridge.1.4)
for the bridge port."
REFERENCE "dot1dBasePort is defined in RFC1493."
::= { stpxBpduSkewingEntry 2 }
stpxBpduSkewingLastSkewDuration OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the skew duration in milliseconds of the
last BPDU skewing detected."
::= { stpxBpduSkewingEntry 3 }
stpxBpduSkewingWorstSkewDuration OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the skew duration in milliseconds of the
worst BPDU skewing detected."
::= { stpxBpduSkewingEntry 4 }
stpxBpduSkewingWorstSkewTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the value of sysUpTime when the worst
BPDU skewing was detected."
::= { stpxBpduSkewingEntry 5 }
-- Multiple Spanning Tree Objects
stpxMSTMaxInstanceNumber OBJECT-TYPE
SYNTAX Integer32 (1..256)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The maximum MST (Multiple Spanning Tree) instance id,
that can be supported by the device for Cisco proprietary
implementation of the MST Protocol.
This object is deprecated and replaced by
stpxSMSTMaxInstanceID."
::= { stpxMSTObjects 1 }
stpxMSTRegionName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational MST region name."
::= { stpxMSTObjects 2 }
stpxMSTRegionRevision OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The operational MST region version.
This object is deprecated and replaced by
stpxSMSTRegionRevision."
::= { stpxMSTObjects 3 }
stpxMSTInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxMSTInstanceEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table contains MST instance information with
one entry for an MST instance within the range of
0 to the object value of stpxMSTMaxInstanceNumber.
This table is deprecated and replaced by
stpxSMSTInstanceTable."
::= { stpxMSTObjects 4 }
stpxMSTInstanceEntry OBJECT-TYPE
SYNTAX StpxMSTInstanceEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A conceptual row containing the MST instance
information."
INDEX { stpxMSTInstanceIndex }
::= { stpxMSTInstanceTable 1 }
StpxMSTInstanceEntry ::= SEQUENCE {
stpxMSTInstanceIndex Integer32,
stpxMSTInstanceVlansMapped OCTET STRING,
stpxMSTInstanceVlansMapped2k OCTET STRING,
stpxMSTInstanceVlansMapped3k OCTET STRING,
stpxMSTInstanceVlansMapped4k OCTET STRING,
stpxMSTInstanceRemainingHopCount Integer32
}
stpxMSTInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An integer that uniquely identifies an MST instance
within the range of 0 to the object value of
stpxMSTMaxInstanceNumber.
This object is deprecated and replaced by
stpxSMSTInstanceIndex."
::= { stpxMSTInstanceEntry 1 }
stpxMSTInstanceVlansMapped OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndex in that octet.
For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to '1'.
This object is deprecated and replaced by
stpxSMSTInstanceVlansMapped1k2k."
::= { stpxMSTInstanceEntry 2 }
stpxMSTInstanceVlansMapped2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
through 1039; etc. The most significant bit of each
octet corresponds to the lowest value VlanIndex in that
octet.
For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to '1'.
This object is deprecated and replaced by
stpxSMSTInstanceVlansMapped1k2k."
::= { stpxMSTInstanceEntry 3 }
stpxMSTInstanceVlansMapped3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The most significant bit of each
octet corresponds to the lowest value VlanIndex in that
octet.
For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to '1'.
This object is deprecated and replaced by
stpxSMSTInstanceVlansMapped3k4k."
::= { stpxMSTInstanceEntry 4 }
stpxMSTInstanceVlansMapped4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
through 3087; etc. The most significant bit of each
octet corresponds to the lowest value VlanIndex in that
octet.
For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to '1'.
This object is deprecated and replaced by
stpxSMSTInstanceVlansMapped3k4k."
::= { stpxMSTInstanceEntry 5 }
stpxMSTInstanceRemainingHopCount OBJECT-TYPE
SYNTAX Integer32 (0..40)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The remaining hop count for this MST instance.
This object will take on value of 40 if the object value
of stpxSMSTInstanceRemainingHopCount is greater than 40.
This object is only instantiated when the object value of
stpxSpanningTreeType is mst(4).
This object is deprecated and replaced by
stpxSMSTInstanceRemainingHopCount."
::= { stpxMSTInstanceEntry 6 }
stpxMSTRegionEditBufferStatus OBJECT-TYPE
SYNTAX INTEGER {
released(1),
acquiredBySnmp(2),
acquiredByNonSnmp(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current ownership status of the unique
Region Config Edit Buffer.
released -- the Edit Buffer can be acquired by any of
the SNMP management stations.
acquiredBySnmp -- the Edit Buffer is acquired by
any of the SNMP management stations.
acquiredByNonSnmp -- the Edit Buffer is acquired by the
non-SNMP users managing the device."
::= { stpxMSTObjects 5 }
stpxMSTRegionEditBufferOperation OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- read-only
acquire(2),
releaseWithForce(3),
commit(4),
rollBack(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the operation that is performed on the Region
Config Edit Buffer.
other -- none of the following operations.
acquire -- acquire the Edit Buffer. This operation can
only be performed when the object
stpxMSTRegionEditBufferStatus has the value of
released(1). After the successful operation of
this action, the stpxMSTRegionEditBufferStatus
will be changed to acquiredBySnmp(2).
releaseWithForce -- release the Edit Buffer acquired by
non-SNMP users with force and discard the changes
in the Edit Buffer. This operation can only be
performed when the object
stpxMSTRegionEditBufferStatus has the value of
acquiredByNonSnmp(2).
commit -- commit the changes in the Edit Buffer
and release the Edit Buffer. The successful
operation of this action will make the changes
in the Edit Buffer effective on the device.
This operation can only be performed when the
object stpxMSTRegionEditBufferStatus has the
value of acquiredBySnmp(3).
rollBack -- discard the changes in the Edit Buffer
and release the Edit Buffer. This operation can
only be performed when the object
stpxMSTRegionEditBufferStatus has the value
of acquiredBySnmp(3).
This object always returns other(1) when it is read."
::= { stpxMSTObjects 6 }
stpxMSTRegionEditName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MST region name in the Edit Buffer.
This object is only instantiated when the
stpxMSTRegionEditBufferStatus has the value of
acquiredBySnmp(2)."
::= { stpxMSTObjects 7 }
stpxMSTRegionEditRevision OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The MST region version in the Edit Buffer. This object is
only instantiated when the stpxMSTRegionEditBufferStatus
has the value of acquiredBySnmp(2).
This object is deprecated and replaced by
stpxSMSTRegionEditRevision."
::= { stpxMSTObjects 8 }
stpxMSTInstanceEditTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxMSTInstanceEditEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table contains MST instance information in the
Edit Buffer with one entry for each MST
instance numbered from 0 to stpxMSTMaxInstanceNumber.
This table is only instantiated when the
stpxMSTRegionEditBufferStatus has the value of
acquiredBySnmp(2).
This table is deprecated and replaced by
stpxSMSTInstanceEditTable."
::= { stpxMSTObjects 9 }
stpxMSTInstanceEditEntry OBJECT-TYPE
SYNTAX StpxMSTInstanceEditEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A conceptual row containing MST instance information
in the Edit Buffer."
INDEX { stpxMSTInstanceEditIndex }
::= { stpxMSTInstanceEditTable 1 }
StpxMSTInstanceEditEntry ::= SEQUENCE {
stpxMSTInstanceEditIndex Integer32,
stpxMSTInstanceEditVlansMap OCTET STRING,
stpxMSTInstanceEditVlansMap2k OCTET STRING,
stpxMSTInstanceEditVlansMap3k OCTET STRING,
stpxMSTInstanceEditVlansMap4k OCTET STRING
}
stpxMSTInstanceEditIndex OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An integer that uniquely identifies an MST instance
from 0 to the object value of stpxMSTMaxInstanceNumber.
The instances of this table entry with
stpxMSTInstanceEditIndex of zero can not be
modified.
This object is deprecated and replaced by
stpxSMSTInstanceEditIndex."
::= { stpxMSTInstanceEditEntry 1 }
stpxMSTInstanceEditVlansMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndex in that octet.
For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to
'1'. Each VLAN can only be mapped to one unique MST
instance in the range from 1 to stpxMSTMaxInstanceNumber.
If the bit corresponding to a VLAN is changed from '1'
to '0', then that VLAN will be automatically mapped to
MST instance 0 by the device.
This object is deprecated and replaced by
stpxSMSTInstanceEditVlansMap1k2k."
::= { stpxMSTInstanceEditEntry 2 }
stpxMSTInstanceEditVlansMap2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
through 1039; etc. The most significant bit of each
octet corresponds to the lowest value VlanIndex in that
octet.
For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to
'1'. Each VLAN can only be mapped to one unique MST
instance in the range from 1 to stpxMSTMaxInstanceNumber.
If the bit corresponding to a VLAN is changed from '1'
to '0', then that VLAN will be automatically mapped to
MST instance 0 by the device.
This object is deprecated and replaced by
stpxSMSTInstanceEditVlansMap1k2k."
::= { stpxMSTInstanceEditEntry 3 }
stpxMSTInstanceEditVlansMap3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The most significant bit of each
octet corresponds to the lowest value VlanIndex in that
octet.
For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to
'1'. Each VLAN can only be mapped to one unique MST
instance in the range from 1 to stpxMSTMaxInstanceNumber.
If the bit corresponding to a VLAN is changed from '1'
to '0', then that VLAN will be automatically mapped to
MST instance 0 by the device.
This object is deprecated and replaced by
stpxSMSTInstanceEditVlansMap3k4k."
::= { stpxMSTInstanceEditEntry 4 }
stpxMSTInstanceEditVlansMap4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
through 3087; etc. The most significant bit of each
octet corresponds to the lowest value VlanIndex in that
octet.
For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to
'1'. Each VLAN can only be mapped to one unique MST
instance in the range from 1 to stpxMSTMaxInstanceNumber.
If the bit corresponding to a VLAN is changed from '1'
to '0', then that VLAN will be automatically mapped to
MST instance 0 by the device.
This object is deprecated and replaced by
stpxSMSTInstanceEditVlansMap3k4k."
::= { stpxMSTInstanceEditEntry 5 }
stpxPreferredMSTInstancesTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxPreferredMSTInstancesEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The table containing indications of which MST instances
are preferred on which trunk ports. The preferred
MST instances on a trunk port have a lower Path Cost value
compared with the MST instances on the trunk not in the
preferred list."
::= { stpxMSTObjects 10 }
stpxPreferredMSTInstancesEntry OBJECT-TYPE
SYNTAX StpxPreferredMSTInstancesEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry indicating which MST instances are preferred on
a specific trunk port."
AUGMENTS { vlanTrunkPortEntry }
::= { stpxPreferredMSTInstancesTable 1 }
StpxPreferredMSTInstancesEntry ::= SEQUENCE {
stpxPreferredMSTInstancesMap OCTET STRING
}
stpxPreferredMSTInstancesMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"A string of octets containing one bit per MST instances
on this trunk port. The first octet corresponds to MST
instances of 0 through 7; the second octet to MST instances
8 through 15; etc. The most significant bit of each octet
corresponds to the lowest MST instance value in that octet.
The number of bits for this mib object will be determined
by the value of stpxMSTMaxInstanceNumber.
For each instance, if it is preferred on this trunk port,
then the bit corresponding to that instance is set to '1'."
::= { stpxPreferredMSTInstancesEntry 1 }
stpxMSTPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxMSTPortEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A table containing port information for the MST
Protocol on all the bridge ports existing on the
system."
::= { stpxMSTObjects 11 }
stpxMSTPortEntry OBJECT-TYPE
SYNTAX StpxMSTPortEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry with port information for the MST Protocol
on a bridge port."
INDEX { stpxMSTPortIndex }
::= { stpxMSTPortTable 1 }
StpxMSTPortEntry ::= SEQUENCE {
stpxMSTPortIndex Integer32,
stpxMSTPortAdminLinkType INTEGER,
stpxMSTPortOperLinkType INTEGER,
stpxMSTPortProtocolMigration TruthValue,
stpxMSTPortStatus BITS
}
stpxMSTPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The value of dot1dBasePort (i.e. dot1dBridge.1.4)
for the bridge port."
REFERENCE "dot1dBasePort is defined in RFC1493."
::= { stpxMSTPortEntry 1 }
stpxMSTPortAdminLinkType OBJECT-TYPE
SYNTAX INTEGER {
pointToPoint(1),
shared(2),
auto(3)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Indicates the administrative link type configuration of
a bridge port for the MST protocol.
pointToPoint -- the port is administratively configured to
be connected to a point-to-point link.
shared -- the port is administratively configured to be
connected to a shared medium.
auto -- the administrative configuration of the port's
link type depends on link duplex of the port.
If the port link is full-duplex, the administrative
link type configuration on this port will be taken
as pointTopoint(1). If the port link is half-duplex,
the administrative link type configuration on this
port will be taken as shared(2).
This configuration of this object only takes effect when the
stpxSpanningTreeType is mst(4) or rapidPvstPlus(5).
stpxMSTPortAdminLinkType is deprecated and replaced
with stpxRSTPPortAdminLinkType."
DEFVAL { auto }
::= { stpxMSTPortEntry 2 }
stpxMSTPortOperLinkType OBJECT-TYPE
SYNTAX INTEGER {
pointToPoint(1),
shared(2),
other(3)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates the operational link type of a bridge port
for the MST protocol.
pointToPoint -- the port is operationally connected to
a point-to-point link.
shared -- the port is operationally connected to
a shared medium.
other -- none of the above.
This object is only instantiated when the object value of
stpxSpanningTreeType is mst(4). stpxMSTPortOperLinkType
is deprecated and replaced with stpxRSTPPortOperLinkType."
::= { stpxMSTPortEntry 3 }
stpxMSTPortProtocolMigration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The protocol migration control on this port. When the
object value of stpxSpanningTreeType is mst(4) or
rapidPvstPlus(5), setting true(1) to this object forces
the device to try using version 2 BPDUs on this port.
When the object value of stpxSpanningTreeType is neither
mst(4) nor rapidPvstPlus(5), setting true(1) to this
object has no effect. Setting false(2) to this object has
no effect. This object always returns false(2) when read.
stpxMSTPortProtocolMigration is deprecated and
replaced with stpxRSTPPortProtocolMigration."
REFERENCE "IEEE 802.1w clause 14.8.2.4, 17.26."
::= { stpxMSTPortEntry 4 }
stpxMSTPortStatus OBJECT-TYPE
SYNTAX BITS {
edge(0),
boundary(1),
pvst(2),
stp(3)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates the operational status of the port for the
MST protocol.
edge -- this port is an edge port for the MST region.
boundary -- this port is a boundary port for the
MST region.
pvst -- this port is connected to a PVST/PVST+ bridge.
stp -- this port is connected to a Single Spanning
Tree bridge.
This object is only instantiated when the object value
of stpxSpanningTreeType is mst(4).
This object is deprecated and replaced by
stpxSMSTPortStatus."
::= { stpxMSTPortEntry 5 }
stpxMSTPortRoleTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxMSTPortRoleEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A table containing a list of the bridge ports for a
particular MST instance. This table is only instantiated
when the stpxSpanningTreeType is mst(4).
This table is deprecated and replaced with
stpxRSTPPortRoleTable."
::= { stpxMSTObjects 12 }
stpxMSTPortRoleEntry OBJECT-TYPE
SYNTAX StpxMSTPortRoleEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry containing the port role information for the MST
protocol on a port for a particular MST instance existing
on the system."
INDEX {
stpxMSTPortRoleInstanceIndex,
stpxMSTPortRolePortIndex
}
::= { stpxMSTPortRoleTable 1 }
StpxMSTPortRoleEntry ::= SEQUENCE {
stpxMSTPortRoleInstanceIndex Integer32,
stpxMSTPortRolePortIndex Integer32,
stpxMSTPortRoleValue INTEGER
}
stpxMSTPortRoleInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The MST instance id within the range of 0 to
stpxMSTMaxInstanceNumber."
::= { stpxMSTPortRoleEntry 1 }
stpxMSTPortRolePortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The value of dot1dBasePort (i.e. dot1dBridge.1.4)
for the bridge port."
REFERENCE "dot1dBasePort is defined in RFC1493."
::= { stpxMSTPortRoleEntry 2 }
stpxMSTPortRoleValue OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
root(2),
designated(3),
alternate(4),
backUp(5),
boundary(6),
master(7)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates the port role on a particular MST instance
for the MST protocol.
disabled -- this port has no role on this MST instance.
root -- this port has the role of root port on this MST
instance.
designated -- this port has the role of designated
port on this MST instance.
alternate -- this port has the role of alternate port
on this MST instance.
backUp -- this port has the role of backup port on this
MST instance.
boundary -- this port has the role of boundary port on
this MST instance.
master -- this port has the role of master port on
this MST instance."
::= { stpxMSTPortRoleEntry 3 }
stpxMSTMaxHopCount OBJECT-TYPE
SYNTAX Integer32 (1..40)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The maximum number of hops for the MST region.
This object will take on value of 40 if the object value
of stpxSMSTMaxHopCount is greater than 40.
This object is deprecated and replaced by
stpxSMSTMaxHopCount."
DEFVAL { 20 }
::= { stpxMSTObjects 13 }
-- Rapid Spanning Tree Protocol Objects
stpxRSTPPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxRSTPPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing port information for the RSTP
Protocol on all the bridge ports existing in the
system."
::= { stpxRSTPObjects 1 }
stpxRSTPPortEntry OBJECT-TYPE
SYNTAX StpxRSTPPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry with port information for the RSTP Protocol
on a bridge port."
INDEX { stpxRSTPPortIndex }
::= { stpxRSTPPortTable 1 }
StpxRSTPPortEntry ::= SEQUENCE {
stpxRSTPPortIndex Integer32,
stpxRSTPPortAdminLinkType INTEGER,
stpxRSTPPortOperLinkType INTEGER,
stpxRSTPPortProtocolMigration TruthValue
}
stpxRSTPPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of dot1dBasePort (i.e. dot1dBridge.1.4)
for the bridge port."
REFERENCE "dot1dBasePort is defined in RFC1493."
::= { stpxRSTPPortEntry 1 }
stpxRSTPPortAdminLinkType OBJECT-TYPE
SYNTAX INTEGER {
pointToPoint(1),
shared(2),
auto(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the administrative link type configuration of
a bridge port for the RSTP protocol.
pointToPoint -- the port is administratively configured to
be connected to a point-to-point link.
shared -- the port is administratively configured to be
connected to a shared medium.
auto -- the administrative configuration of the port's
link type depends on link duplex of the port.
If the port link is full-duplex, the administrative
link type configuration on this port will be taken
as pointTopoint(1). If the port link is half-duplex,
the administrative link type configuration on this
port will be taken as shared(2).
This configuration of this object only takes effect when the
stpxSpanningTreeType is mst(4) or rapidPvstPlus(5)."
DEFVAL { auto }
::= { stpxRSTPPortEntry 2 }
stpxRSTPPortOperLinkType OBJECT-TYPE
SYNTAX INTEGER {
pointToPoint(1),
shared(2),
other(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operational link type of a bridge port
for the RSTP protocol.
pointToPoint -- the port is operationally connected to
a point-to-point link.
shared -- the port is operationally connected to
a shared medium.
other -- none of the above.
This object is only instantiated when the object value of
stpxSpanningTreeType is mst(4) or rapidPvstPlus(5)."
::= { stpxRSTPPortEntry 3 }
stpxRSTPPortProtocolMigration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol migration control on this port. When the
object value of stpxSpanningTreeType is mst(4) or
rapidPvstPlus(5), setting true(1) to this object forces
the device to try using version 2 BPDUs on this port.
When the object value of stpxSpanningTreeType is neither
mst(4) nor rapidPvstPlus(5), setting true(1) to
this object has no effect. Setting false(2) to this
object has no effect. This object always returns
false(2) when read."
REFERENCE "IEEE 802.1w clause 14.8.2.4, 17.26."
::= { stpxRSTPPortEntry 4 }
stpxRSTPPortRoleTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxRSTPPortRoleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing a list of the bridge ports for a
particular Spanning Tree instance. This table is
only instantiated when the stpxSpanningTreeType is mst(4)
or rapidPvstPlus(5)."
::= { stpxRSTPObjects 2 }
stpxRSTPPortRoleEntry OBJECT-TYPE
SYNTAX StpxRSTPPortRoleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the port role information for the RSTP
protocol on a port for a particular Spanning Tree instance."
INDEX {
stpxRSTPPortRoleInstanceIndex,
stpxRSTPPortRolePortIndex
}
::= { stpxRSTPPortRoleTable 1 }
StpxRSTPPortRoleEntry ::= SEQUENCE {
stpxRSTPPortRoleInstanceIndex Integer32,
stpxRSTPPortRolePortIndex Integer32,
stpxRSTPPortRoleValue INTEGER
}
stpxRSTPPortRoleInstanceIndex OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Spanning Tree instance id, it can either be a
VLAN number if the stpxSpanningTreeType is rapidPvstPlus(5)
or an MST instance id if the stpxSpanningTreeType is mst(4)."
::= { stpxRSTPPortRoleEntry 1 }
stpxRSTPPortRolePortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of dot1dBasePort (i.e. dot1dBridge.1.4)
for the bridge port."
REFERENCE "dot1dBasePort is defined in RFC1493."
::= { stpxRSTPPortRoleEntry 2 }
stpxRSTPPortRoleValue OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
root(2),
designated(3),
alternate(4),
backUp(5),
boundary(6),
master(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the port role on a particular Spanning Tree
instance for the RSTP protocol.
disabled -- this port has no role in this Spanning
Tree instance.
root -- this port has the role of root port in this
Spanning Tree instance.
designated -- this port has the role of designated
port in this Spanning Tree instance.
alternate -- this port has the role of alternate port
in this Spanning Tree instance.
backUp -- this port has the role of backup port in this
Spanning Tree instance.
boundary -- this port has the role of boundary port in
this Spanning Tree instance.
master -- this port has the role of master port in
this Spanning Tree instance.
This object could have a value of 'boundary' or 'master'
only when the object value of stpxSpanningTreeType is mst(4)."
::= { stpxRSTPPortRoleEntry 3 }
stpxRSTPTransmitHoldCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Transmit Hold Count."
::= { stpxRSTPObjects 3 }
-- Rapid PVST+ Objects
stpxRPVSTPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxRPVSTPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing a list of the bridge ports
for a particular Spanning Tree Instance.
This table is only instantiated when the object value
of stpxSpanningTreeType is rapidPvstPlus(5)."
::= { stpxRPVSTObjects 1 }
stpxRPVSTPortEntry OBJECT-TYPE
SYNTAX StpxRPVSTPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry with port status information on a
bridge port for a particular Spanning Tree
Instance."
INDEX {
stpxRPVSTPortVlanIndex,
stpxRPVSTPortIndex
}
::= { stpxRPVSTPortTable 1 }
StpxRPVSTPortEntry ::= SEQUENCE {
stpxRPVSTPortVlanIndex VlanIndex,
stpxRPVSTPortIndex Integer32,
stpxRPVSTPortStatus BITS
}
stpxRPVSTPortVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN id of the VLAN."
::= { stpxRPVSTPortEntry 1 }
stpxRPVSTPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of dot1dBasePort (i.e. dot1dBridge.1.4)
for the bridge port."
REFERENCE "dot1dBasePort is defined in RFC1493."
::= { stpxRPVSTPortEntry 2 }
stpxRPVSTPortStatus OBJECT-TYPE
SYNTAX BITS {
edge(0),
unused1(1),
unused2(2),
stp(3),
dispute(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operational status of the port for the
Rapid PVST+ protocol.
edge -- this port is an edge port for the RST region.
unused1 -- unused bit 1.
unused2 -- unused bit 2.
stp -- this port is connected to a Single Spanning
Tree/PVST+ bridge.
dispute -- this port, as a designated port, received an
inferior BPDU with a designated role and the
learning bit being set."
::= { stpxRPVSTPortEntry 3 }
-- Standard Multiple Spanning Tree Objects.
-- This group of objects is for the management
-- of IEEE Multiple Spanning Tree, i.e., Standard MST
-- (SMST). Objects in this group replace some of the
-- objects in stpxMSTObjects which are for the the
-- managment of the Cisco proprietary implementation
-- of the Multiple Spanning Tree (MST).
stpxSMSTMaxInstances OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of MST instances that can be
supported by the device for IEEE MST."
::= { stpxSMSTObjects 1 }
stpxSMSTMaxInstanceID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum MST instance ID that can be supported
by the device for IEEE MST."
::= { stpxSMSTObjects 2 }
stpxSMSTRegionRevision OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational region version for IEEE MST."
::= { stpxSMSTObjects 3 }
stpxSMSTRegionEditRevision OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MST region version in the Edit Buffer for IEEE
MST.
This object is only instantiated when the
stpxMSTRegionEditBufferStatus has the value of
acquiredBySnmp(2)."
::= { stpxSMSTObjects 4 }
stpxSMSTInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxSMSTInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains MST instance information
for IEEE MST."
::= { stpxSMSTObjects 5 }
stpxSMSTInstanceEntry OBJECT-TYPE
SYNTAX StpxSMSTInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing the MST instance
information for IEEE MST."
INDEX { stpxSMSTInstanceIndex }
::= { stpxSMSTInstanceTable 1 }
StpxSMSTInstanceEntry ::= SEQUENCE {
stpxSMSTInstanceIndex Unsigned32,
stpxSMSTInstanceVlansMapped1k2k OCTET STRING,
stpxSMSTInstanceVlansMapped3k4k OCTET STRING,
stpxSMSTInstanceRemainingHopCount Integer32,
stpxSMSTInstanceCISTRegionalRoot OCTET STRING,
stpxSMSTInstanceCISTIntRootCost Unsigned32
}
stpxSMSTInstanceIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MST instance ID, the value of which is in the range
from 0 to stpxSMSTMaxInstanceID."
::= { stpxSMSTInstanceEntry 1 }
stpxSMSTInstanceVlansMapped1k2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values of 0 through 2047. The
first octet corresponds to VLANs with VlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndex in that octet.
For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to '1'.
If the length of this string is less than 256 octets,
any 'missing' octets are assumed to contain the value
of zero."
::= { stpxSMSTInstanceEntry 2 }
stpxSMSTInstanceVlansMapped3k4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values of 2048 through 4095. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The most significant bit of each
octet corresponds to the lowest value VlanIndex in that
octet.
For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to '1'.
If the length of this string is less than 256 octets,
any 'missing' octets are assumed to contain the value
of zero."
::= { stpxSMSTInstanceEntry 3 }
stpxSMSTInstanceRemainingHopCount OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remaining hop count for this MST instance. If this object
value is not applicable on an MST instance, then the value
retrieved for this object for that MST instance will be -1.
This object is only instantiated when the object value of
stpxSpanningTreeType is mst(4)."
::= { stpxSMSTInstanceEntry 4 }
stpxSMSTInstanceCISTRegionalRoot OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Bridge Identifier (refer to BridgeId
defined in BRIDGE-MIB) of CIST (Common and Internal
Spanning Tree) Regional Root for the MST region.
This object is only instantiated when the object value of
stpxSpanningTreeType is mst(4) and stpxSMSTInstanceIndex
is 0."
REFERENCE "IEEE 802.1S-2002: Section 13.9."
::= { stpxSMSTInstanceEntry 5 }
stpxSMSTInstanceCISTIntRootCost OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the CIST Internal Root Path Cost, i.e., the
path cost to the CIST Regional Root as specified by the
corresponding stpxSMSTInstanceCISTRegionalRoot for the
MST region.
This object is only instantiated when the object value of
stpxSpanningTreeType is mst(4) and stpxSMSTInstanceIndex
is 0."
REFERENCE "IEEE 802.1S-2002: Section 13.9."
::= { stpxSMSTInstanceEntry 6 }
stpxSMSTInstanceEditTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxSMSTInstanceEditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains MST instance information in the
Edit Buffer.
This table is only instantiated when the object value
of stpxMSTRegionEditBufferStatus has the value of
acquiredBySnmp(2)."
::= { stpxSMSTObjects 6 }
stpxSMSTInstanceEditEntry OBJECT-TYPE
SYNTAX StpxSMSTInstanceEditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing MST instance information
in the Edit Buffer.
The total number of entries in this table has to be
less than or equal to the object value of stpxSMSTMaxInstances."
INDEX { stpxSMSTInstanceEditIndex }
::= { stpxSMSTInstanceEditTable 1 }
StpxSMSTInstanceEditEntry ::= SEQUENCE {
stpxSMSTInstanceEditIndex Unsigned32,
stpxSMSTInstanceEditVlansMap1k2k OCTET STRING,
stpxSMSTInstanceEditVlansMap3k4k OCTET STRING,
stpxSMSTInstanceEditRowStatus RowStatus
}
stpxSMSTInstanceEditIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MST instance ID, the value of which is in the range from
0 to stpxSMSTMaxInstanceID.
The instances of this table entry with
stpxSMSTInstanceEditIndex of zero is automatically
created by the device and can not modified."
::= { stpxSMSTInstanceEditEntry 1 }
stpxSMSTInstanceEditVlansMap1k2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values of 0 through 2047. The
first octet corresponds to VLANs with VlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndex in that octet.
For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to
'1'. Each VLAN can only be mapped to one unique MST
instance with the range from 0 to stpxSMSTMaxInstanceNumber.
If the bit corresponding to a VLAN is changed from '1'
to '0', then that VLAN will be automatically mapped to
SMST instance 0 by the device. If the bit corresponding
to a VLAN is changed from '0' to '1', then that VLAN will
be automatically removed from the MST instance this VLAN was
previously mapped to. If the length of this string is
less than 256 octets, any 'missing' octets are assumed to
contain the value of zero."
::= { stpxSMSTInstanceEditEntry 2 }
stpxSMSTInstanceEditVlansMap3k4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with VlanIndex values of 2048 through 4095. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056 through
2063; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndex in that octet.
For each VLAN, if it is mapped to this MST instance,
then the bit corresponding to that VLAN is set to
'1'. Each VLAN can only be mapped to one unique MST
instance with the range from 0 to stpxSMSTMaxInstanceNumber.
If the bit corresponding to a VLAN is changed from '1'
to '0', then that VLAN will be automatically mapped to
SMST instance 0 by the device. If the bit corresponding
to a VLAN is changed from '0' to '1', then that VLAN will
be automatically removed from the MST instance this VLAN was
previously mapped to. If the length of this string is
less than 256 octets, any 'missing' octets are assumed to
contain the value of zero."
::= { stpxSMSTInstanceEditEntry 3 }
stpxSMSTInstanceEditRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the creation and deletion of a row
in stpxSMSTInstanceEditTable.
When creating an entry in this table, 'createAndGo' method
is used and the value of this object is set to 'active'.
Deactivation of an 'active' entry is not allowed. When
deleting an entry in this table, 'destroy' method is used.
Once a row becomes active, value in any other column
within such a row may be modified. When a row is active,
setting the instance of stpxSMSTInstanceEditVlansMap1k2k
stpxSMSTInstanceEditVlansMap3k4k for the same MST instance
both to the value of zero length can not be allowed."
::= { stpxSMSTInstanceEditEntry 4 }
stpxSMSTPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpxSMSTPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing port information for the MST
Protocol on all the bridge ports existing on the
system.
This table is only instantiated when the object
value of stpxSpanningTreeType is mst(4)"
::= { stpxSMSTObjects 7 }
stpxSMSTPortEntry OBJECT-TYPE
SYNTAX StpxSMSTPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry with port information for the MST protocol
on a bridge port."
INDEX { stpxSMSTPortIndex }
::= { stpxSMSTPortTable 1 }
StpxSMSTPortEntry ::= SEQUENCE {
stpxSMSTPortIndex Integer32,
stpxSMSTPortStatus BITS,
stpxSMSTPortAdminHelloTime Unsigned32,
stpxSMSTPortConfigedHelloTime Unsigned32,
stpxSMSTPortOperHelloTime Integer32,
stpxSMSTPortAdminMSTMode INTEGER,
stpxSMSTPortOperMSTMode INTEGER
}
stpxSMSTPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of dot1dBasePort (i.e. dot1dBridge.1.4)
for the bridge port."
REFERENCE "dot1dBasePort is defined in RFC1493."
::= { stpxSMSTPortEntry 1 }
stpxSMSTPortStatus OBJECT-TYPE
SYNTAX BITS {
edge(0),
boundary(1),
pvst(2),
stp(3),
dispute(4),
rstp(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operational status of the port for the
MST protocol.
edge -- this port is an edge port for the MST region.
boundary -- this port is a boundary port for the
MST region.
pvst -- this port is connected to a PVST/PVST+ bridge.
stp -- this port is connected to a Single Spanning
Tree bridge.
dispute -- this port, as a designated port, received an
inferior BPDU with a designated role and the
learning bit being set.
rstp -- this port is connected to a RSTP bridge or an
MST bridge in a different MST region."
::= { stpxSMSTPortEntry 2 }
stpxSMSTPortAdminHelloTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "hundredth of seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The adminitratively configured hello time in hundredth
of seconds on a port for IEEE MST. The granularity
of this timer is 1 second. An agent may return a badValue
error if a set is attempted to a value which is not a
whole number of seconds. This object value of zero
means the hello time is not specifically configured on
this port and object value of stpxSMSTPortConfigedHelloTime
retrieved for this port will take on the value of
dot1dStpBridgeHelloTime defined in BRIDGE-MIB."
::= { stpxSMSTPortEntry 3 }
stpxSMSTPortConfigedHelloTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "hundredth of seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the effective configuration of the hello time on
a port."
::= { stpxSMSTPortEntry 4 }
stpxSMSTPortOperHelloTime OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
UNITS "hundredth of seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational hello time in hundredth of seconds on a
port for IEEE MST. If this object value is not
applicable on a port, then the value retrieved on that
port will be -1."
::= { stpxSMSTPortEntry 5 }
stpxSMSTPortAdminMSTMode OBJECT-TYPE
SYNTAX INTEGER {
preStandard(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired MST mode of this port.
preStandard -- this port is administratively configured to
transmit pre-standard, i.e. pre IEEE MST, BPDUs.
auto -- the BPDU transmission mode of this port is based
on automatic detection of neighbor ports."
::= { stpxSMSTPortEntry 6 }
stpxSMSTPortOperMSTMode OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
preStandard(2),
standard(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current operational MST mode of this port.
unknown -- the operational mode is currently unknown.
preStandard -- this port is currently operating in
pre-standard MSTP BPDU transmission mode.
standard -- this port is currently operating in IEEE MST
BPDU transmission mode."
::= { stpxSMSTPortEntry 7 }
stpxSMSTMaxHopCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of hops for the IEEE MST region."
::= { stpxSMSTObjects 8 }
stpxSMSTConfigDigest OBJECT-TYPE
SYNTAX StpxMSTConfigurationDigest
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IEEE MST region configuration digest."
REFERENCE "IEEE 802.1Q-2003 Section 13.7."
::= { stpxSMSTObjects 9 }
stpxSMSTConfigPreStandardDigest OBJECT-TYPE
SYNTAX StpxMSTConfigurationDigest
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The pre-standard MST region configuration digest."
::= { stpxSMSTObjects 10 }
stpxL2GatewayDomainId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies layer2 gateway spanning tree
domain identifier."
::= { stpxL2GatewayObjects 1 }
-- Notifications
stpxNotificationsPrefix OBJECT IDENTIFIER
::= { stpxNotifications 0 }
stpxInconsistencyUpdate NOTIFICATION-TYPE
OBJECTS { stpxInconsistentState }
STATUS current
DESCRIPTION
"A stpxInconsistencyUpdate notification is sent by a
bridge when an instance of stpxInconsistentState is
created or destroyed. That is, when an inconsistency is
discovered in the VLAN's Spanning Tree for a particular
port, or when such an inconsistency disappears. Note
that the trap is not sent if the port transitions between
different types of inconsistency.
The stpxInconsistentState value indicates the type of
inconsistency which now exists/no longer exists for the
relevant VLAN on the relevant port."
::= { stpxNotificationsPrefix 1 }
stpxRootInconsistencyUpdate NOTIFICATION-TYPE
OBJECTS {
stpxRootInconsistencyState,
stpxSpanningTreeType
}
STATUS current
DESCRIPTION
"A stpxRootInconsistencyUpdate notification is sent by a
bridge when an instance of stpxRootInconsistencyState
is created or destroyed. That is, when an
root-inconsistency is discovered in the VLAN's or
instance's Spanning Tree for a particular port, or when
such an root-inconsistency disappears. For creation, the
value of stpxRootInconsistencyState in the notification is
true(1); for deletion, the value is false(2).
The object value of stpxSpanningTreeType indicates
which Spanning Tree protocol is running when an instance
of stpxRootInconsistencyState is created or destroyed."
::= { stpxNotificationsPrefix 2 }
stpxLoopInconsistencyUpdate NOTIFICATION-TYPE
OBJECTS {
stpxLoopInconsistencyState,
stpxSpanningTreeType
}
STATUS current
DESCRIPTION
"A stpxLoopInconsistencyUpdate notification is sent by a
bridge when an instance of stpxLoopInconsistencyState
is created or destroyed. That is, when an
loop-inconsistency is discovered in the VLAN's or
instance's Spanning Tree for a particular port, or when
such an loop-inconsistency disappears. For creation,
the value of stpxLoopInconsistencyState in the
notification is true(1); for deletion, the value is
false(2).
The object value of stpxSpanningTreeType indicates
which Spanning Tree protocol is running when an instance
of stpxLoopInconsistencyState is created or
destroyed."
::= { stpxNotificationsPrefix 3 }
stpxMstInconsistencyUpdate NOTIFICATION-TYPE
OBJECTS { stpxMstInconsistencyState }
STATUS current
DESCRIPTION
"A stpxMstInconsistencyUpdate notification is sent by a
bridge when an instance of stpxMstInconsistencyState
is created or destroyed. That is, when an
type-inconsistency is discovered in instance's Spanning
Tree for a particular port, or when such a type-inconsistency
disappears.
Note that the trap is not sent if the port transitions between
different types of inconsistency.
The stpxMstInconsistentState value indicates the type of
inconsistency which now exists/no longer exists for the
relevant instance on the relevant port."
::= { stpxNotificationsPrefix 4 }
-- conformance information
stpxMIBConformance OBJECT IDENTIFIER
::= { ciscoStpExtensionsMIB 3 }
stpxMIBCompliances OBJECT IDENTIFIER
::= { stpxMIBConformance 1 }
stpxMIBGroups OBJECT IDENTIFIER
::= { stpxMIBConformance 2 }
-- compliance statements
stpxMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
Cisco STP Extensions MIB."
MODULE -- this module
GROUP stpxUplinkGroup
DESCRIPTION
"This group is mandatory for implementations
of the UplinkFast capability."
GROUP stpxPreferredVlansGroup
DESCRIPTION
"This group is mandatory for implementations
of the Preferred VLANs capability."
GROUP stpxNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
::= { stpxMIBCompliances 1 }
stpxMIBCompliance2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
Cisco STP Extensions MIB."
MODULE -- this module
GROUP stpxUplinkGroup
DESCRIPTION
"This group is mandatory for implementations
of the UplinkFast capability."
GROUP stpxPreferredVlansGroup
DESCRIPTION
"This group is mandatory for implementations
of the Preferred VLANs capability."
GROUP stpxNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpxBackboneGroup
DESCRIPTION
"This group is mandatory for implementations
of the BackboneFast capability."
::= { stpxMIBCompliances 2 }
stpxMIBCompliance3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
Cisco STP Extensions MIB."
MODULE -- this module
GROUP stpxUplinkGroup
DESCRIPTION
"This group is mandatory for implementations
of the UplinkFast capability."
GROUP stpxPreferredVlansGroup
DESCRIPTION
"This group is mandatory for implementations
of the Preferred VLANs capability."
GROUP stpxNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpxBackboneGroup
DESCRIPTION
"This group is mandatory for implementations
of the BackboneFast capability."
GROUP stpxRootGuardGroup
DESCRIPTION
"This group is mandatory for implementations
of the RootGuard capability."
GROUP stpxRootInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpx4kVlanGroup
DESCRIPTION
"This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095."
GROUP stpxSpanningTreeGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP and PVSTP+"
GROUP stpxMISTPGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP."
::= { stpxMIBCompliances 3 }
stpxMIBCompliance4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
Cisco STP Extensions MIB."
MODULE -- this module
GROUP stpxUplinkGroup
DESCRIPTION
"This group is mandatory for implementations
of the UplinkFast capability."
GROUP stpxPreferredVlansGroup
DESCRIPTION
"This group is mandatory for implementations
of the Preferred VLANs capability."
GROUP stpxNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpxBackboneGroup
DESCRIPTION
"This group is mandatory for implementations
of the BackboneFast capability."
GROUP stpxRootGuardGroup
DESCRIPTION
"This group is mandatory for implementations
of the RootGuard capability."
GROUP stpxRootInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpx4kVlanGroup
DESCRIPTION
"This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095."
GROUP stpxSpanningTreeGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP and PVSTP+"
GROUP stpxMISTPGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP."
GROUP stpxLongPathCostModeGroup
DESCRIPTION
"This group must be implemented by the entities
that support 32 bits spannning tree path cost
value."
::= { stpxMIBCompliances 4 }
stpxMIBCompliance5 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
Cisco STP Extensions MIB."
MODULE -- this module
GROUP stpxUplinkGroup
DESCRIPTION
"This group is mandatory for implementations
of the UplinkFast capability."
GROUP stpxPreferredVlansGroup
DESCRIPTION
"This group is mandatory for implementations
of the Preferred VLANs capability."
GROUP stpxNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpxBackboneGroup
DESCRIPTION
"This group is mandatory for implementations
of the BackboneFast capability."
GROUP stpxRootGuardGroup
DESCRIPTION
"This group is mandatory for implementations
of the RootGuard capability."
GROUP stpxRootInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpx4kVlanGroup
DESCRIPTION
"This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095."
GROUP stpxSpanningTreeGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP and PVSTP+"
GROUP stpxMISTPGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP."
GROUP stpxLongPathCostModeGroup
DESCRIPTION
"This group must be implemented by the entities
that support 32 bits spannning tree path cost
value."
GROUP stpxPVSTVlanGroup
DESCRIPTION
"This group is optional for implementations
of the Spanning Tree PVST+ Protocol VLAN
configuration."
GROUP stpxMISTPGroup2
DESCRIPTION
"This group is optional for implementations
that support MISTP with the range of VlanIndex
up to 4095."
GROUP stpxLoopGuardGroup
DESCRIPTION
"This group is mandatory for implementations
of the LoopGuard capability."
GROUP stpxLoopInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation is required to implement."
GROUP stpxFastStartGroup
DESCRIPTION
"This stpxFastStartGroup is an optional group
containing objects providing information about
Spanning Tree Port Fast Start feature."
::= { stpxMIBCompliances 5 }
stpxMIBCompliance6 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
Cisco STP Extensions MIB."
MODULE -- this module
GROUP stpxUplinkGroup
DESCRIPTION
"This group is mandatory for implementations
of the UplinkFast capability."
GROUP stpxSstpGroup
DESCRIPTION
"This group is optional for implementations of
Cisco's Shared Spanning Tree Protocol (SSTP)."
GROUP stpxPreferredVlansGroup
DESCRIPTION
"This group is mandatory for implementations
of the Preferred VLANs capability."
GROUP stpxNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpxBackboneGroup
DESCRIPTION
"This group is mandatory for implementations
of the BackboneFast capability."
GROUP stpxRootGuardGroup
DESCRIPTION
"This group is mandatory for implementations
of the RootGuard capability."
GROUP stpxRootInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpx4kVlanGroup
DESCRIPTION
"This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095."
GROUP stpxSpanningTreeGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP and PVSTP+"
GROUP stpxMISTPGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP."
GROUP stpxLongPathCostModeGroup
DESCRIPTION
"This group must be implemented by the entities
that support 32 bits spannning tree path cost
value."
GROUP stpxPVSTVlanGroup
DESCRIPTION
"This group is optional for implementations
of the Spanning Tree PVST+ Protocol VLAN
configuration."
GROUP stpxMISTPGroup2
DESCRIPTION
"This group is optional for implementations
that support MISTP with the range of VlanIndex
up to 4095."
GROUP stpxLoopInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation is required to implement."
GROUP stpxBpduSkewingGroup
DESCRIPTION
"This is an optional group for implementations of
Spanning Tree BPDU Skewing feature."
GROUP stpxFastStartGroup2
DESCRIPTION
"This stpxFastStartGroup is an optional group
containing objects providing information about
Spanning Tree Port Fast Start feature."
GROUP stpxLoopGuardGroup2
DESCRIPTION
"This group is optional for implementations
of the LoopGuard capability."
GROUP stpxMSTGroup
DESCRIPTION
"This group is optional for implementation of
Multiple Spanning Tree Protocol feature."
GROUP stpxPreferredMSTInstancesGroup
DESCRIPTION
"This group is optional for implementations
of Preferred MST Instance Map feature."
::= { stpxMIBCompliances 6 }
stpxMIBCompliance7 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
Cisco STP Extensions MIB."
MODULE -- this module
GROUP stpxUplinkGroup
DESCRIPTION
"This group is mandatory for implementations
of the UplinkFast capability."
GROUP stpxSstpGroup
DESCRIPTION
"This group is optional for implementations of
Cisco's Shared Spanning Tree Protocol (SSTP)."
GROUP stpxPreferredVlansGroup
DESCRIPTION
"This group is mandatory for implementations
of the Preferred VLANs capability."
GROUP stpxNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpxBackboneGroup
DESCRIPTION
"This group is mandatory for implementations
of the BackboneFast capability."
GROUP stpxRootGuardGroup
DESCRIPTION
"This group is mandatory for implementations
of the RootGuard capability."
GROUP stpxRootInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpx4kVlanGroup
DESCRIPTION
"This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095."
GROUP stpxSpanningTreeGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP and PVSTP+"
GROUP stpxMISTPGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP."
GROUP stpxLongPathCostModeGroup
DESCRIPTION
"This group must be implemented by the entities
that support 32 bits spannning tree path cost
value."
GROUP stpxPVSTVlanGroup
DESCRIPTION
"This group is optional for implementations
of the Spanning Tree PVST+ Protocol VLAN
configuration."
GROUP stpxMISTPGroup2
DESCRIPTION
"This group is optional for implementations
that support MISTP with the range of VlanIndex
up to 4095."
GROUP stpxLoopInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation is required to implement."
GROUP stpxBpduSkewingGroup
DESCRIPTION
"This is an optional group for implementations of
Spanning Tree BPDU Skewing feature."
GROUP stpxFastStartGroup2
DESCRIPTION
"This stpxFastStartGroup is an optional group
containing objects providing information about
Spanning Tree Port Fast Start feature."
GROUP stpxLoopGuardGroup2
DESCRIPTION
"This group is optional for implementations
of the LoopGuard capability."
GROUP stpxPreferredMSTInstancesGroup
DESCRIPTION
"This group is optional for implementations
of Preferred MST Instance Map feature."
GROUP stpxFastStartGroup3
DESCRIPTION
"This group is optional for implementations
of Bpdu Guard and Bpdu Filter feature."
GROUP stpxUplinkGroup2
DESCRIPTION
"This group is optional for implementations
of UplinkFast feature."
GROUP stpxBackboneGroup2
DESCRIPTION
"This group is optional for implementations
of BackboneFast feature."
GROUP stpxMSTGroup2
DESCRIPTION
"This group is optional for implementation of
Multiple Spanning Tree Protocol feature."
GROUP stpxRSTPGroup
DESCRIPTION
"This group is optional for implementation of
Rapid Spanning Tree Protocol feature."
GROUP stpxRPVSTGroup
DESCRIPTION
"This group is optional for implementation of
Rapid PVST+ feature."
::= { stpxMIBCompliances 7 }
stpxMIBCompliance8 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
Cisco STP Extensions MIB."
MODULE -- this module
GROUP stpxUplinkGroup
DESCRIPTION
"This group is mandatory for implementations
of the UplinkFast capability."
GROUP stpxSstpGroup
DESCRIPTION
"This group is optional for implementations of
Cisco's Shared Spanning Tree Protocol (SSTP)."
GROUP stpxPreferredVlansGroup
DESCRIPTION
"This group is mandatory for implementations
of the Preferred VLANs capability."
GROUP stpxNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpxBackboneGroup
DESCRIPTION
"This group is mandatory for implementations
of the BackboneFast capability."
GROUP stpxRootGuardGroup
DESCRIPTION
"This group is mandatory for implementations
of the RootGuard capability."
GROUP stpxRootInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpx4kVlanGroup
DESCRIPTION
"This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095."
GROUP stpxSpanningTreeGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP and PVSTP+"
GROUP stpxMISTPGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP."
GROUP stpxLongPathCostModeGroup
DESCRIPTION
"This group must be implemented by the entities
that support 32 bits spannning tree path cost
value."
GROUP stpxPVSTVlanGroup
DESCRIPTION
"This group is optional for implementations
of the Spanning Tree PVST+ Protocol VLAN
configuration."
GROUP stpxMISTPGroup2
DESCRIPTION
"This group is optional for implementations
that support MISTP with the range of VlanIndex
up to 4095."
GROUP stpxLoopInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation is required to implement."
GROUP stpxBpduSkewingGroup
DESCRIPTION
"This is an optional group for implementations of
Spanning Tree BPDU Skewing feature."
GROUP stpxFastStartGroup2
DESCRIPTION
"This stpxFastStartGroup is an optional group
containing objects providing information about
Spanning Tree Port Fast Start feature."
GROUP stpxLoopGuardGroup2
DESCRIPTION
"This group is optional for implementations
of the LoopGuard capability."
GROUP stpxPreferredMSTInstancesGroup
DESCRIPTION
"This group is optional for implementations
of Preferred MST Instance Map feature."
GROUP stpxFastStartGroup3
DESCRIPTION
"This group is optional for implementations
of Bpdu Guard and Bpdu Filter feature."
GROUP stpxUplinkGroup2
DESCRIPTION
"This group is optional for implementations
of UplinkFast feature."
GROUP stpxBackboneGroup2
DESCRIPTION
"This group is optional for implementations
of BackboneFast feature."
GROUP stpxMSTGroup2
DESCRIPTION
"This group is optional for implementation of
Multiple Spanning Tree Protocol feature."
GROUP stpxRSTPGroup
DESCRIPTION
"This group is optional for implementation of
Rapid Spanning Tree Protocol feature."
GROUP stpxRPVSTGroup
DESCRIPTION
"This group is optional for implementation of
Rapid PVST+ feature."
GROUP stpxExtendedSysIDGroup
DESCRIPTION
"This group is mandatory for implementation of
Extended System ID feature."
GROUP stpxNotificationEnableGroup
DESCRIPTION
"This group is mandatory for implementation of
control on the generation of Spanning Tree
notifications."
GROUP stpxFastStartOperModeGroup
DESCRIPTION
"This group is mandatory for implementation of
Spanning Tree Port Fast Start Oper Mode feature."
::= { stpxMIBCompliances 8 }
stpxMIBCompliance9 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
Cisco STP Extensions MIB."
MODULE -- this module
GROUP stpxUplinkGroup
DESCRIPTION
"This group is mandatory for implementations
of the UplinkFast capability."
GROUP stpxSstpGroup
DESCRIPTION
"This group is optional for implementations of
Cisco's Shared Spanning Tree Protocol (SSTP)."
GROUP stpxPreferredVlansGroup
DESCRIPTION
"This group is mandatory for implementations
of the Preferred VLANs capability."
GROUP stpxNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpxBackboneGroup
DESCRIPTION
"This group is mandatory for implementations
of the BackboneFast capability."
GROUP stpxRootGuardGroup
DESCRIPTION
"This group is mandatory for implementations
of the RootGuard capability."
GROUP stpxRootInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpx4kVlanGroup
DESCRIPTION
"This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095."
GROUP stpxSpanningTreeGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP and PVSTP+"
GROUP stpxMISTPGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP."
GROUP stpxLongPathCostModeGroup
DESCRIPTION
"This group must be implemented by the entities
that support 32 bits spannning tree path cost
value."
GROUP stpxPVSTVlanGroup
DESCRIPTION
"This group is optional for implementations
of the Spanning Tree PVST+ Protocol VLAN
configuration."
GROUP stpxMISTPGroup2
DESCRIPTION
"This group is optional for implementations
that support MISTP with the range of VlanIndex
up to 4095."
GROUP stpxLoopInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation is required to implement."
GROUP stpxBpduSkewingGroup
DESCRIPTION
"This is an optional group for implementations of
Spanning Tree BPDU Skewing feature."
GROUP stpxFastStartGroup2
DESCRIPTION
"This stpxFastStartGroup is an optional group
containing objects providing information about
Spanning Tree Port Fast Start feature."
GROUP stpxLoopGuardGroup2
DESCRIPTION
"This group is optional for implementations
of the LoopGuard capability."
GROUP stpxFastStartGroup3
DESCRIPTION
"This group is optional for implementations
of Bpdu Guard and Bpdu Filter feature."
GROUP stpxUplinkGroup2
DESCRIPTION
"This group is optional for implementations
of UplinkFast feature."
GROUP stpxBackboneGroup2
DESCRIPTION
"This group is optional for implementations
of BackboneFast feature."
GROUP stpxRSTPGroup
DESCRIPTION
"This group is optional for implementation of
Rapid Spanning Tree Protocol feature."
GROUP stpxRPVSTGroup
DESCRIPTION
"This group is optional for implementation of
Rapid PVST+ feature."
GROUP stpxExtendedSysIDGroup
DESCRIPTION
"This group is mandatory for implementation of
Extended System ID feature."
GROUP stpxNotificationEnableGroup
DESCRIPTION
"This group is mandatory for implementation of
control on the generation of Spanning Tree
notifications."
GROUP stpxFastStartOperModeGroup
DESCRIPTION
"This group is mandatory for implementation of
Spanning Tree Port Fast Start Oper Mode feature."
GROUP stpxMSTGroup3
DESCRIPTION
"This group is mandatory for implementation of
Multiple Spanning Tree Protocol on the device."
GROUP stpxSMSTGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting IEEE MST on the device."
GROUP stpxSMSTInstanceGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting MST instance information for
IEEE MST on the device."
GROUP stpxSMSTInstanceEditGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting MST instance edit information for
IEEE MST on the device."
GROUP stpxSMSTPortStatusGroup
DESCRIPTION
"This group is mandatory for implementation of
port status information for Multiple Spanning
Tree Protocol on the device."
GROUP stpxSMSTPortHelloTimeGroup
DESCRIPTION
"This group is mandatory for implementation of
port hello time information for IEEE MST
on the device."
::= { stpxMIBCompliances 9 }
stpxMIBCompliance10 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
Cisco STP Extensions MIB."
MODULE -- this module
GROUP stpxUplinkGroup
DESCRIPTION
"This group is mandatory for implementations
of the UplinkFast capability."
GROUP stpxSstpGroup
DESCRIPTION
"This group is optional for implementations of
Cisco's Shared Spanning Tree Protocol (SSTP)."
GROUP stpxPreferredVlansGroup
DESCRIPTION
"This group is mandatory for implementations
of the Preferred VLANs capability."
GROUP stpxNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpxBackboneGroup
DESCRIPTION
"This group is mandatory for implementations
of the BackboneFast capability."
GROUP stpxRootGuardGroup
DESCRIPTION
"This group is mandatory for implementations
of the RootGuard capability."
GROUP stpxRootInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpx4kVlanGroup
DESCRIPTION
"This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095."
GROUP stpxSpanningTreeGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP and PVSTP+"
GROUP stpxMISTPGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP."
GROUP stpxLongPathCostModeGroup
DESCRIPTION
"This group must be implemented by the entities
that support 32 bits spannning tree path cost
value."
GROUP stpxPVSTVlanGroup
DESCRIPTION
"This group is optional for implementations
of the Spanning Tree PVST+ Protocol VLAN
configuration."
GROUP stpxMISTPGroup2
DESCRIPTION
"This group is optional for implementations
that support MISTP with the range of VlanIndex
up to 4095."
GROUP stpxLoopInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation is required to implement."
GROUP stpxBpduSkewingGroup
DESCRIPTION
"This is an optional group for implementations of
Spanning Tree BPDU Skewing feature."
GROUP stpxFastStartGroup2
DESCRIPTION
"This stpxFastStartGroup is an optional group
containing objects providing information about
Spanning Tree Port Fast Start feature."
GROUP stpxLoopGuardGroup2
DESCRIPTION
"This group is optional for implementations
of the LoopGuard capability."
GROUP stpxFastStartGroup3
DESCRIPTION
"This group is optional for implementations
of Bpdu Guard and Bpdu Filter feature."
GROUP stpxUplinkGroup2
DESCRIPTION
"This group is optional for implementations
of UplinkFast feature."
GROUP stpxBackboneGroup2
DESCRIPTION
"This group is optional for implementations
of BackboneFast feature."
GROUP stpxRSTPGroup
DESCRIPTION
"This group is optional for implementation of
Rapid Spanning Tree Protocol feature."
GROUP stpxRPVSTGroup
DESCRIPTION
"This group is optional for implementation of
Rapid PVST+ feature."
GROUP stpxExtendedSysIDGroup
DESCRIPTION
"This group is mandatory for implementation of
Extended System ID feature."
GROUP stpxNotificationEnableGroup
DESCRIPTION
"This group is mandatory for implementation of
control on the generation of Spanning Tree
notifications."
GROUP stpxFastStartOperModeGroup
DESCRIPTION
"This group is mandatory for implementation of
Spanning Tree Port Fast Start Oper Mode feature."
GROUP stpxMSTGroup3
DESCRIPTION
"This group is mandatory for implementation of
Multiple Spanning Tree Protocol on the device."
GROUP stpxSMSTGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting IEEE MST on the device."
GROUP stpxSMSTInstanceGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting MST instance information for
IEEE MST on the device."
GROUP stpxSMSTInstanceEditGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting MST instance edit information for
IEEE MST on the device."
GROUP stpxSMSTPortStatusGroup
DESCRIPTION
"This group is mandatory for implementation of
port status information for Multiple Spanning
Tree Protocol on the device."
GROUP stpxSMSTPortHelloTimeGroup
DESCRIPTION
"This group is mandatory for implementation of
port hello time information for IEEE MST
on the device."
GROUP stpxSMSTInstanceCISTGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting Common and Internal Spanning Tree (CIST)
information for IEEE MST on the device."
::= { stpxMIBCompliances 10 }
stpxMIBCompliance11 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
Cisco STP Extensions MIB."
MODULE -- this module
GROUP stpxUplinkGroup
DESCRIPTION
"This group is mandatory for implementations
of the UplinkFast capability."
GROUP stpxSstpGroup
DESCRIPTION
"This group is optional for implementations of
Cisco's Shared Spanning Tree Protocol (SSTP)."
GROUP stpxPreferredVlansGroup
DESCRIPTION
"This group is mandatory for implementations
of the Preferred VLANs capability."
GROUP stpxNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpxBackboneGroup
DESCRIPTION
"This group is mandatory for implementations
of the BackboneFast capability."
GROUP stpxRootGuardGroup
DESCRIPTION
"This group is mandatory for implementations
of the RootGuard capability."
GROUP stpxRootInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpx4kVlanGroup
DESCRIPTION
"This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095."
GROUP stpxSpanningTreeGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP and PVSTP+"
GROUP stpxMISTPGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP."
GROUP stpxLongPathCostModeGroup
DESCRIPTION
"This group must be implemented by the entities
that support 32 bits spannning tree path cost
value."
GROUP stpxPVSTVlanGroup
DESCRIPTION
"This group is optional for implementations
of the Spanning Tree PVST+ Protocol VLAN
configuration."
GROUP stpxMISTPGroup2
DESCRIPTION
"This group is optional for implementations
that support MISTP with the range of VlanIndex
up to 4095."
GROUP stpxLoopInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation is required to implement."
GROUP stpxBpduSkewingGroup
DESCRIPTION
"This is an optional group for implementations of
Spanning Tree BPDU Skewing feature."
GROUP stpxFastStartGroup2
DESCRIPTION
"This stpxFastStartGroup is an optional group
containing objects providing information about
Spanning Tree Port Fast Start feature."
GROUP stpxLoopGuardGroup2
DESCRIPTION
"This group is optional for implementations
of the LoopGuard capability."
GROUP stpxFastStartGroup3
DESCRIPTION
"This group is optional for implementations
of Bpdu Guard and Bpdu Filter feature."
GROUP stpxUplinkGroup2
DESCRIPTION
"This group is optional for implementations
of UplinkFast feature."
GROUP stpxBackboneGroup2
DESCRIPTION
"This group is optional for implementations
of BackboneFast feature."
GROUP stpxRSTPGroup
DESCRIPTION
"This group is optional for implementation of
Rapid Spanning Tree Protocol feature."
GROUP stpxRPVSTGroup
DESCRIPTION
"This group is optional for implementation of
Rapid PVST+ feature."
GROUP stpxExtendedSysIDGroup
DESCRIPTION
"This group is mandatory for implementation of
Extended System ID feature."
GROUP stpxNotificationEnableGroup
DESCRIPTION
"This group is mandatory for implementation of
control on the generation of Spanning Tree
notifications."
GROUP stpxFastStartOperModeGroup
DESCRIPTION
"This group is mandatory for implementation of
Spanning Tree Port Fast Start Oper Mode feature."
GROUP stpxMSTGroup3
DESCRIPTION
"This group is mandatory for implementation of
Multiple Spanning Tree Protocol on the device."
GROUP stpxSMSTGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting IEEE MST on the device."
GROUP stpxSMSTInstanceGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting MST instance information for
IEEE MST on the device."
GROUP stpxSMSTInstanceEditGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting MST instance edit information for
IEEE MST on the device."
GROUP stpxSMSTPortStatusGroup
DESCRIPTION
"This group is mandatory for implementation of
port status information for Multiple Spanning
Tree Protocol on the device."
GROUP stpxSMSTPortHelloTimeGroup
DESCRIPTION
"This group is mandatory for implementation of
port hello time information for IEEE MST
on the device."
GROUP stpxSMSTInstanceCISTGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting Common and Internal Spanning Tree (CIST)
information for IEEE MST on the device."
GROUP stpxPathCostOperModeGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting operational spanning tree path cost
mode."
::= { stpxMIBCompliances 11 }
stpxMIBCompliance12 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
Cisco STP Extensions MIB."
MODULE -- this module
GROUP stpxUplinkGroup
DESCRIPTION
"This group is mandatory for implementations
of the UplinkFast capability."
GROUP stpxSstpGroup
DESCRIPTION
"This group is optional for implementations of
Cisco's Shared Spanning Tree Protocol (SSTP)."
GROUP stpxPreferredVlansGroup
DESCRIPTION
"This group is mandatory for implementations
of the Preferred VLANs capability."
GROUP stpxNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpxBackboneGroup
DESCRIPTION
"This group is mandatory for implementations
of the BackboneFast capability."
GROUP stpxRootGuardGroup
DESCRIPTION
"This group is mandatory for implementations
of the RootGuard capability."
GROUP stpxRootInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpx4kVlanGroup
DESCRIPTION
"This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095."
GROUP stpxSpanningTreeGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP and PVSTP+"
GROUP stpxMISTPGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP."
GROUP stpxLongPathCostModeGroup
DESCRIPTION
"This group must be implemented by the entities
that support 32 bits spannning tree path cost
value."
GROUP stpxPVSTVlanGroup
DESCRIPTION
"This group is optional for implementations
of the Spanning Tree PVST+ Protocol VLAN
configuration."
GROUP stpxMISTPGroup2
DESCRIPTION
"This group is optional for implementations
that support MISTP with the range of VlanIndex
up to 4095."
GROUP stpxLoopInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation is required to implement."
GROUP stpxBpduSkewingGroup
DESCRIPTION
"This is an optional group for implementations of
Spanning Tree BPDU Skewing feature."
GROUP stpxFastStartGroup2
DESCRIPTION
"This stpxFastStartGroup is an optional group
containing objects providing information about
Spanning Tree Port Fast Start feature."
GROUP stpxLoopGuardGroup2
DESCRIPTION
"This group is optional for implementations
of the LoopGuard capability."
GROUP stpxFastStartGroup3
DESCRIPTION
"This group is optional for implementations
of Bpdu Guard and Bpdu Filter feature."
GROUP stpxUplinkGroup2
DESCRIPTION
"This group is optional for implementations
of UplinkFast feature."
GROUP stpxBackboneGroup2
DESCRIPTION
"This group is optional for implementations
of BackboneFast feature."
GROUP stpxRSTPGroup
DESCRIPTION
"This group is optional for implementation of
Rapid Spanning Tree Protocol feature."
GROUP stpxRSTPTransmitHoldCountGroup
DESCRIPTION
"This group is optional for implementation of
Rapid Spanning Tree Protocol feature."
GROUP stpxRPVSTGroup
DESCRIPTION
"This group is optional for implementation of
Rapid PVST+ feature."
GROUP stpxExtendedSysIDGroup
DESCRIPTION
"This group is mandatory for implementation of
Extended System ID feature."
GROUP stpxNotificationEnableGroup
DESCRIPTION
"This group is mandatory for implementation of
control on the generation of Spanning Tree
notifications."
GROUP stpxFastStartOperModeGroup
DESCRIPTION
"This group is mandatory for implementation of
Spanning Tree Port Fast Start Oper Mode feature."
GROUP stpxMSTGroup4
DESCRIPTION
"This group is mandatory for implementation of
Multiple Spanning Tree Protocol on the device."
GROUP stpxSMSTGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting IEEE MST on the device."
GROUP stpxSMSTMaxHopCountGroup
DESCRIPTION
"This group is mandatory for implementation of
maximum hop count configuration on the device."
GROUP stpxSMSTInstanceGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting MST instance information for
IEEE MST on the device."
GROUP stpxSMSTInstanceEditGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting MST instance edit information for
IEEE MST on the device."
GROUP stpxSMSTPortStatusGroup
DESCRIPTION
"This group is mandatory for implementation of
port status information for Multiple Spanning
Tree Protocol on the device."
GROUP stpxSMSTPortHelloTimeGroup
DESCRIPTION
"This group is mandatory for implementation of
port hello time information for IEEE MST
on the device."
GROUP stpxSMSTInstanceCISTGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting Common and Internal Spanning Tree (CIST)
information for IEEE MST on the device."
GROUP stpxPathCostOperModeGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting operational spanning tree path cost
mode."
GROUP stpxSMSTPortMSTModeGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting port MST mode configuration."
GROUP stpxSMSTConfigDigestGroup
DESCRIPTION
"This group is optional for implementation of
supporting IEEE MST on the device."
::= { stpxMIBCompliances 12 }
stpxMIBCompliance13 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
Cisco STP Extensions MIB."
MODULE -- this module
GROUP stpxUplinkGroup
DESCRIPTION
"This group is mandatory for implementations
of the UplinkFast capability."
GROUP stpxSstpGroup
DESCRIPTION
"This group is optional for implementations of
Cisco's Shared Spanning Tree Protocol (SSTP)."
GROUP stpxPreferredVlansGroup
DESCRIPTION
"This group is mandatory for implementations
of the Preferred VLANs capability."
GROUP stpxNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpxBackboneGroup
DESCRIPTION
"This group is mandatory for implementations
of the BackboneFast capability."
GROUP stpxRootGuardGroup
DESCRIPTION
"This group is mandatory for implementations
of the RootGuard capability."
GROUP stpxRootInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation required to implement."
GROUP stpx4kVlanGroup
DESCRIPTION
"This group must be implemented by the
entities which support the range of VlanIndex
between 1024 and 4095."
GROUP stpxSpanningTreeGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP and PVSTP+"
GROUP stpxMISTPGroup
DESCRIPTION
"This group must be implemented by the entities
that support MISTP."
GROUP stpxLongPathCostModeGroup
DESCRIPTION
"This group must be implemented by the entities
that support 32 bits spannning tree path cost
value."
GROUP stpxPVSTVlanGroup
DESCRIPTION
"This group is optional for implementations
of the Spanning Tree PVST+ Protocol VLAN
configuration."
GROUP stpxMISTPGroup2
DESCRIPTION
"This group is optional for implementations
that support MISTP with the range of VlanIndex
up to 4095."
GROUP stpxLoopInconsistencyNotificationsGroup
DESCRIPTION
"The notifications which a STP extension
implementation is required to implement."
GROUP stpxBpduSkewingGroup
DESCRIPTION
"This is an optional group for implementations of
Spanning Tree BPDU Skewing feature."
GROUP stpxFastStartGroup2
DESCRIPTION
"This stpxFastStartGroup is an optional group
containing objects providing information about
Spanning Tree Port Fast Start feature."
GROUP stpxLoopGuardGroup2
DESCRIPTION
"This group is optional for implementations
of the LoopGuard capability."
GROUP stpxFastStartGroup3
DESCRIPTION
"This group is optional for implementations
of Bpdu Guard and Bpdu Filter feature."
GROUP stpxUplinkGroup2
DESCRIPTION
"This group is optional for implementations
of UplinkFast feature."
GROUP stpxBackboneGroup2
DESCRIPTION
"This group is optional for implementations
of BackboneFast feature."
GROUP stpxRSTPGroup
DESCRIPTION
"This group is optional for implementation of
Rapid Spanning Tree Protocol feature."
GROUP stpxRSTPTransmitHoldCountGroup
DESCRIPTION
"This group is optional for implementation of
Rapid Spanning Tree Protocol feature."
GROUP stpxRPVSTGroup
DESCRIPTION
"This group is optional for implementation of
Rapid PVST+ feature."
GROUP stpxExtendedSysIDGroup
DESCRIPTION
"This group is mandatory for implementation of
Extended System ID feature."
GROUP stpxNotificationEnableGroup
DESCRIPTION
"This group is mandatory for implementation of
control on the generation of Spanning Tree
notifications."
GROUP stpxFastStartOperModeGroup
DESCRIPTION
"This group is mandatory for implementation of
Spanning Tree Port Fast Start Oper Mode feature."
GROUP stpxMSTGroup4
DESCRIPTION
"This group is mandatory for implementation of
Multiple Spanning Tree Protocol on the device."
GROUP stpxSMSTGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting IEEE MST on the device."
GROUP stpxSMSTMaxHopCountGroup
DESCRIPTION
"This group is mandatory for implementation of
maximum hop count configuration on the device."
GROUP stpxSMSTInstanceGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting MST instance information for
IEEE MST on the device."
GROUP stpxSMSTInstanceEditGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting MST instance edit information for
IEEE MST on the device."
GROUP stpxSMSTPortStatusGroup
DESCRIPTION
"This group is mandatory for implementation of
port status information for Multiple Spanning
Tree Protocol on the device."
GROUP stpxSMSTPortHelloTimeGroup
DESCRIPTION
"This group is mandatory for implementation of
port hello time information for IEEE MST
on the device."
GROUP stpxSMSTInstanceCISTGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting Common and Internal Spanning Tree (CIST)
information for IEEE MST on the device."
GROUP stpxPathCostOperModeGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting operational spanning tree path cost
mode."
GROUP stpxSMSTPortMSTModeGroup
DESCRIPTION
"This group is mandatory for implementation of
supporting port MST mode configuration."
GROUP stpxSMSTConfigDigestGroup
DESCRIPTION
"This group is optional for implementation of
supporting IEEE MST on the device."
GROUP stpxL2GatewayDomainIdGroup
DESCRIPTION
"This group is mandatory for implementation of
layer2 gateway domain identifier."
::= { stpxMIBCompliances 13 }
-- units of conformance
stpxUplinkGroup OBJECT-GROUP
OBJECTS {
stpxUplinkFastEnabled,
stpxUplinkFastTransitions,
stpxUplinkStationLearningGenRate,
stpxUplinkStationLearningFrames
}
STATUS current
DESCRIPTION
"A collection of objects for managing the UplinkFast
capability."
::= { stpxMIBGroups 1 }
stpxPreferredVlansGroup OBJECT-GROUP
OBJECTS { stpxPreferredVlansMap }
STATUS current
DESCRIPTION
"A collection of objects for indicating preferred VLANs."
::= { stpxMIBGroups 2 }
stpxSstpGroup OBJECT-GROUP
OBJECTS { stpxInconsistentState }
STATUS current
DESCRIPTION
"A collection of objects to support Cisco's Shared Spanning
Tree Protocol (SSTP)."
::= { stpxMIBGroups 3 }
stpxNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS { stpxInconsistencyUpdate }
STATUS current
DESCRIPTION
"The notifications which a STP extension implementation is
required to implement."
::= { stpxMIBGroups 4 }
stpxBackboneGroup OBJECT-GROUP
OBJECTS {
stpxBackboneFastEnabled,
stpxBackboneFastInInferiorBPDUs,
stpxBackboneFastInRLQRequestPDUs,
stpxBackboneFastInRLQResponsePDUs,
stpxBackboneFastOutRLQRequestPDUs,
stpxBackboneFastOutRLQResponsePDUs
}
STATUS current
DESCRIPTION
"A collection of objects for managing the BackboneFast
capability."
::= { stpxMIBGroups 5 }
stpxRootGuardGroup OBJECT-GROUP
OBJECTS {
stpxRootGuardConfigEnabled,
stpxRootInconsistencyState
}
STATUS current
DESCRIPTION
"A collection of objects to support root guard
capabilities."
::= { stpxMIBGroups 6 }
stpxRootInconsistencyNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS { stpxRootInconsistencyUpdate }
STATUS current
DESCRIPTION
"The notifications which a STP root guard
implementation is required to implement."
::= { stpxMIBGroups 7 }
stpx4kVlanGroup OBJECT-GROUP
OBJECTS {
stpxPreferredVlansMap2k,
stpxPreferredVlansMap3k,
stpxPreferredVlansMap4k
}
STATUS current
DESCRIPTION
"A collection of objects providing information
for VLANS with VlanIndex from 1024 to 4095."
::= { stpxMIBGroups 8 }
stpxSpanningTreeGroup OBJECT-GROUP
OBJECTS { stpxSpanningTreeType }
STATUS current
DESCRIPTION
"An object selecting what kind of spanning tree protocol."
::= { stpxMIBGroups 9 }
stpxMISTPGroup OBJECT-GROUP
OBJECTS {
stpxMISTPInstanceNumber,
stpxMISTPInstanceEnable,
stpxVlanMISTPInstMapInstIndex,
stpxVlanMISTPInstMapEditInstIndex,
stpxPreferredMISTPInstancesMap
}
STATUS current
DESCRIPTION
"A collection objects managing the information of
MISTP feature."
::= { stpxMIBGroups 10 }
stpxLongPathCostModeGroup OBJECT-GROUP
OBJECTS {
stpxSpanningTreePathCostMode,
stpxLongStpPortPathCost
}
STATUS current
DESCRIPTION
"A collection objects managing the information of
spanning tree path cost in 32 bits value."
::= { stpxMIBGroups 11 }
stpxPVSTVlanGroup OBJECT-GROUP
OBJECTS { stpxPVSTVlanEnable }
STATUS current
DESCRIPTION
"A collection of objects managing the information
of Spanning Tree PVST+ protocol VLAN configuration."
::= { stpxMIBGroups 12 }
stpxMISTPGroup2 OBJECT-GROUP
OBJECTS {
stpxMISTPInstanceVlansMapped,
stpxMISTPInstanceVlansMapped2k,
stpxMISTPInstanceVlansMapped3k,
stpxMISTPInstanceVlansMapped4k
}
STATUS current
DESCRIPTION
"A collection objects managing the information of
MISTP instances to VLAN mapping with the range of
VlanIndex up to 4095."
::= { stpxMIBGroups 13 }
stpxLoopGuardGroup OBJECT-GROUP
OBJECTS {
stpxLoopGuardConfigEnabled,
stpxLoopInconsistencyState
}
STATUS deprecated
DESCRIPTION
"A collection of objects to support LoopGuard
capabilities."
::= { stpxMIBGroups 14 }
stpxLoopInconsistencyNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS { stpxLoopInconsistencyUpdate }
STATUS current
DESCRIPTION
"The notifications which a STP LoopGuard
implementation is required to implement."
::= { stpxMIBGroups 15 }
stpxFastStartGroup OBJECT-GROUP
OBJECTS {
stpxFastStartBpduGuardEnable,
stpxFastStartBpduFilterEnable,
stpxFastStartPortEnable
}
STATUS deprecated
DESCRIPTION
"A collection of objects to support Spanning Tree Port
Fast Start feature."
::= { stpxMIBGroups 16 }
stpxBpduSkewingGroup OBJECT-GROUP
OBJECTS {
stpxBpduSkewingDetectionEnable,
stpxBpduSkewingLastSkewDuration,
stpxBpduSkewingWorstSkewDuration,
stpxBpduSkewingWorstSkewTime
}
STATUS current
DESCRIPTION
"This is an optional group with a collection of
objects to support Spanning Tree BPDU Skewing feature."
::= { stpxMIBGroups 17 }
stpxFastStartGroup2 OBJECT-GROUP
OBJECTS {
stpxFastStartBpduGuardEnable,
stpxFastStartBpduFilterEnable,
stpxFastStartPortMode,
stpxFastStartGlobalDefaultMode
}
STATUS current
DESCRIPTION
"An optional group with a collection of objects to
support Fast Start global default mode on the device."
::= { stpxMIBGroups 18 }
stpxLoopGuardGroup2 OBJECT-GROUP
OBJECTS {
stpxLoopInconsistencyState,
stpxLoopGuardConfigMode,
stpxLoopGuardGlobalDefaultMode
}
STATUS current
DESCRIPTION
"An optional group with a collection of objects to
support Loop Guard global default mode on the device."
::= { stpxMIBGroups 19 }
stpxMSTGroup OBJECT-GROUP
OBJECTS {
stpxMSTMaxInstanceNumber,
stpxMSTRegionName,
stpxMSTRegionRevision,
stpxMSTInstanceVlansMapped,
stpxMSTInstanceVlansMapped2k,
stpxMSTInstanceVlansMapped3k,
stpxMSTInstanceVlansMapped4k,
stpxMSTInstanceRemainingHopCount,
stpxMSTRegionEditBufferStatus,
stpxMSTRegionEditBufferOperation,
stpxMSTRegionEditName,
stpxMSTRegionEditRevision,
stpxMSTInstanceEditVlansMap,
stpxMSTInstanceEditVlansMap2k,
stpxMSTInstanceEditVlansMap3k,
stpxMSTInstanceEditVlansMap4k,
stpxMSTPortAdminLinkType,
stpxMSTPortOperLinkType,
stpxMSTPortProtocolMigration,
stpxMSTPortStatus,
stpxMSTPortRoleValue,
stpxMSTMaxHopCount
}
STATUS deprecated
DESCRIPTION
"An optional group with a collection of objects to
support Multiple Spanning Tree Protocol on the device."
::= { stpxMIBGroups 20 }
stpxPreferredMSTInstancesGroup OBJECT-GROUP
OBJECTS { stpxPreferredMSTInstancesMap }
STATUS deprecated
DESCRIPTION
"An optional group with a collection of objects to
support Preferred MST Instance Map feature for Multiple
Spanning Tree Protocol on the device."
::= { stpxMIBGroups 21 }
stpxFastStartGroup3 OBJECT-GROUP
OBJECTS {
stpxFastStartPortBpduGuardMode,
stpxFastStartPortBpduFilterMode
}
STATUS current
DESCRIPTION
"An optional group with a collection of objects to
support per port Bpdu Guard and Bpdu Filter mode
configuration on the device."
::= { stpxMIBGroups 22 }
stpxUplinkGroup2 OBJECT-GROUP
OBJECTS { stpxUplinkFastOperEnabled }
STATUS current
DESCRIPTION
"An optional group with a collection of objects to
manage the UplinkFast capability."
::= { stpxMIBGroups 23 }
stpxBackboneGroup2 OBJECT-GROUP
OBJECTS { stpxBackboneFastOperEnabled }
STATUS current
DESCRIPTION
"An optional group with a collection of objects to
manage the BackboneFast capability."
::= { stpxMIBGroups 24 }
stpxMSTGroup2 OBJECT-GROUP
OBJECTS {
stpxMSTMaxInstanceNumber,
stpxMSTRegionName,
stpxMSTRegionRevision,
stpxMSTInstanceVlansMapped,
stpxMSTInstanceVlansMapped2k,
stpxMSTInstanceVlansMapped3k,
stpxMSTInstanceVlansMapped4k,
stpxMSTInstanceRemainingHopCount,
stpxMSTRegionEditBufferStatus,
stpxMSTRegionEditBufferOperation,
stpxMSTRegionEditName,
stpxMSTRegionEditRevision,
stpxMSTInstanceEditVlansMap,
stpxMSTInstanceEditVlansMap2k,
stpxMSTInstanceEditVlansMap3k,
stpxMSTInstanceEditVlansMap4k,
stpxMSTPortStatus,
stpxMSTMaxHopCount
}
STATUS deprecated
DESCRIPTION
"An optional group with a collection of objects to
support Multiple Spanning Tree Protocol on the device."
::= { stpxMIBGroups 25 }
stpxRSTPGroup OBJECT-GROUP
OBJECTS {
stpxRSTPPortAdminLinkType,
stpxRSTPPortOperLinkType,
stpxRSTPPortProtocolMigration,
stpxRSTPPortRoleValue
}
STATUS current
DESCRIPTION
"An optional group with a collection of objects to
support Rapid Spanning Tree Protocol on the device."
::= { stpxMIBGroups 26 }
stpxRPVSTGroup OBJECT-GROUP
OBJECTS { stpxRPVSTPortStatus }
STATUS current
DESCRIPTION
"An optional group with a collection of objects to
support Rapid PVST+ on the device."
::= { stpxMIBGroups 27 }
stpxExtendedSysIDGroup OBJECT-GROUP
OBJECTS {
stpxExtendedSysIDAdminEnabled,
stpxExtendedSysIDOperEnabled
}
STATUS current
DESCRIPTION
"A collection of objects to manage the
Extended System ID capability."
::= { stpxMIBGroups 28 }
stpxNotificationEnableGroup OBJECT-GROUP
OBJECTS { stpxNotificationEnable }
STATUS current
DESCRIPTION
"A collection of objects providing control on the
generation of Spanning Tree notifications."
::= { stpxMIBGroups 29 }
stpxFastStartOperModeGroup OBJECT-GROUP
OBJECTS { stpxFastStartOperMode }
STATUS current
DESCRIPTION
"A collection of objects providing Spanning Tree
Port Fast Start Operatioanl information on a port."
::= { stpxMIBGroups 30 }
stpxMSTGroup3 OBJECT-GROUP
OBJECTS {
stpxMSTRegionName,
stpxMSTRegionEditBufferStatus,
stpxMSTRegionEditBufferOperation,
stpxMSTRegionEditName,
stpxMSTMaxHopCount
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing support
for Multiple Spanning Tree Protocol on the device."
::= { stpxMIBGroups 31 }
stpxSMSTGroup OBJECT-GROUP
OBJECTS {
stpxSMSTMaxInstances,
stpxSMSTMaxInstanceID,
stpxSMSTRegionRevision,
stpxSMSTRegionEditRevision
}
STATUS current
DESCRIPTION
"A collection of objects providing support for
IEEE MST on the device."
::= { stpxMIBGroups 32 }
stpxSMSTInstanceGroup OBJECT-GROUP
OBJECTS {
stpxSMSTInstanceVlansMapped1k2k,
stpxSMSTInstanceVlansMapped3k4k,
stpxSMSTInstanceRemainingHopCount
}
STATUS current
DESCRIPTION
"A collection of objects providing support for
MST instance information for IEEE MST on the device."
::= { stpxMIBGroups 33 }
stpxSMSTInstanceEditGroup OBJECT-GROUP
OBJECTS {
stpxSMSTInstanceEditVlansMap1k2k,
stpxSMSTInstanceEditVlansMap3k4k,
stpxSMSTInstanceEditRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing support for MST
instance edit information for IEEE MST on the device."
::= { stpxMIBGroups 34 }
stpxSMSTPortStatusGroup OBJECT-GROUP
OBJECTS { stpxSMSTPortStatus }
STATUS current
DESCRIPTION
"A collection of objects providing support for
port status information for MST Protocol on the
device."
::= { stpxMIBGroups 35 }
stpxSMSTPortHelloTimeGroup OBJECT-GROUP
OBJECTS {
stpxSMSTPortAdminHelloTime,
stpxSMSTPortConfigedHelloTime,
stpxSMSTPortOperHelloTime
}
STATUS current
DESCRIPTION
"A collection of objects providing support for per
port hello time information for IEEE MST on the device."
::= { stpxMIBGroups 36 }
stpxSMSTInstanceCISTGroup OBJECT-GROUP
OBJECTS {
stpxSMSTInstanceCISTRegionalRoot,
stpxSMSTInstanceCISTIntRootCost
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
Common and Internal Spanning Tree (CIST) for IEEE
MST on the device."
::= { stpxMIBGroups 37 }
stpxPathCostOperModeGroup OBJECT-GROUP
OBJECTS { stpxSpanningTreePathCostOperMode }
STATUS current
DESCRIPTION
"A collection of objects providing information about
operational spanning tree path cost mode."
::= { stpxMIBGroups 38 }
stpxRSTPTransmitHoldCountGroup OBJECT-GROUP
OBJECTS { stpxRSTPTransmitHoldCount }
STATUS current
DESCRIPTION
"A collection of objects providing information for
configuration of transmit hold count for Rapid Spanning
Tree Protocol."
::= { stpxMIBGroups 39 }
stpxSMSTPortMSTModeGroup OBJECT-GROUP
OBJECTS {
stpxSMSTPortAdminMSTMode,
stpxSMSTPortOperMSTMode
}
STATUS current
DESCRIPTION
"A collection of objects providing information for port
MST mode configuration on the device."
::= { stpxMIBGroups 40 }
stpxSMSTMaxHopCountGroup OBJECT-GROUP
OBJECTS { stpxSMSTMaxHopCount }
STATUS current
DESCRIPTION
"A collection of objects providing information for
configuration of IEEE MST maximum hop count."
::= { stpxMIBGroups 41 }
stpxSMSTConfigDigestGroup OBJECT-GROUP
OBJECTS {
stpxSMSTConfigDigest,
stpxSMSTConfigPreStandardDigest
}
STATUS current
DESCRIPTION
"A collection of objects providing information for
MST configuration digests on the device."
::= { stpxMIBGroups 42 }
stpxMSTGroup4 OBJECT-GROUP
OBJECTS {
stpxMSTRegionName,
stpxMSTRegionEditBufferStatus,
stpxMSTRegionEditBufferOperation,
stpxMSTRegionEditName
}
STATUS current
DESCRIPTION
"A collection of objects providing support
for Multiple Spanning Tree Protocol on the device."
::= { stpxMIBGroups 43 }
stpxL2GatewayDomainIdGroup OBJECT-GROUP
OBJECTS { stpxL2GatewayDomainId }
STATUS current
DESCRIPTION
"A collection of objects providing information
for layer2 gateway spanning tree domain identifier on
the device."
::= { stpxMIBGroups 44 }
stpxMSTInconsistencyGroup OBJECT-GROUP
OBJECTS { stpxMstInconsistencyState }
STATUS current
DESCRIPTION
"A collection of objects providing inconsistency information
for Multiple Spanning Tree Protocol on the device."
::= { stpxMIBGroups 45 }
stpxMSTNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { stpxMstInconsistencyUpdate }
STATUS current
DESCRIPTION
"A collection of notifications for Multiple Spanning Tree
Protocol on the device."
::= { stpxMIBGroups 46 }
END
Reference in New Issue View Git Blame Copy Permalink