726 lines
24 KiB
Plaintext
726 lines
24 KiB
Plaintext
-- *****************************************************************
|
|
-- CISCO-VRF-MIB.my
|
|
--
|
|
-- July 2009, Ganesan Rajam
|
|
--
|
|
-- Copyright (c) 2009 by cisco Systems Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
--
|
|
|
|
CISCO-VRF-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP,
|
|
NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
StorageType,
|
|
RowStatus,
|
|
TruthValue,
|
|
TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
ifIndex,
|
|
InterfaceIndex,
|
|
ifName
|
|
FROM IF-MIB
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
|
|
ciscoVrfMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200912100000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems
|
|
Customer Service
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
Tel: +1 800 553-NETS
|
|
E-mail: cs-snmp@cisco.com"
|
|
DESCRIPTION
|
|
"The MIB module for provisioning and managing network
|
|
virtualization features.
|
|
|
|
This module provides manageability for VRF, VRF-Lite and
|
|
vNET. VRF stands for Virtual Routing and Forwarding. VRF
|
|
is an extension of IP routing that provides multiple routing
|
|
instances. VRF provides independent routing instances and
|
|
hence the same or over-lapping addresses can be used without
|
|
conflicting each other. VRFs are used in conjunction with
|
|
MPLS VPN to provide traffic separation between multiple VPN
|
|
customers.
|
|
|
|
A VRF-Lite enabled device implements VRFs and does not require
|
|
MPLS for end to end communication. Instead of using MPLS
|
|
labels, VRF-Lite uses the interfaces to distinguish routes for
|
|
different VPNs. VRF-Lite forms virtual packet-forwarding tables
|
|
by associating one or more interfaces with each VRF, and
|
|
interfaces cannot belong to more than one VRF at any time.
|
|
|
|
VRF-Lite is an IP based hop-by-hop virtualization mechanism and
|
|
it involves complex configuration of every hop in the network.
|
|
vNET, virtual network, is also an IP based hop-by-hop mechanism
|
|
that can provide end-to-end virtualization of the network. vNET
|
|
greatly reduces the complexity in VRF-Lite deployment.
|
|
|
|
This MIB module will allow the user to perform the following
|
|
|
|
* Create and monitor VRFs
|
|
* Group VRFs to create VRF List
|
|
* Associate/Dis-associate interface to/from a VRF
|
|
* Enable vNET trunking on an interface
|
|
* Specify VRF list per trunk"
|
|
REVISION "200912100000Z"
|
|
DESCRIPTION
|
|
"Latest version of this MIB module."
|
|
::= { ciscoMgmt 711 }
|
|
|
|
|
|
|
|
-- User Defined Types used in this MIB
|
|
|
|
CvVrfIfType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type value denotes the manner in which the interface is
|
|
used.
|
|
|
|
vNETTrunkSI(1) : The sub-interface is created under a vNET
|
|
trunk interface to carry vNET tagged traffic
|
|
belonging to a VRF.
|
|
vNETEdge(2) : The interface is assigned to a VRF which is
|
|
tagged with a vNET tag.
|
|
vrfEdge(3) : The interface is assigned to an untagged VRF."
|
|
SYNTAX INTEGER {
|
|
vNETTrunkSI(1),
|
|
vNETEdge(2),
|
|
vrfEdge(3)
|
|
}
|
|
|
|
CvVnetTagOrZero ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tag value assigned to a vNET. The tag value is global,
|
|
meaning on each router, the same vNET must be assigned the
|
|
same numerical tag value. This is assigned by the system
|
|
operator or NMS or through a network tag distribution
|
|
mechanism.
|
|
|
|
The valid tag value is ranged from 2 to 4094. Traffic that
|
|
carries a vNET tag is called tagged traffic. On the other
|
|
hand, traffic that does not carry a vNET tag is called
|
|
untagged traffic. A vNET is defined as a VRF with a tag
|
|
assigned. A valid tag value assigned to a VRF indicates
|
|
it is a vNET.
|
|
|
|
Zero(0) is a special value and its meaning should be
|
|
interpreted in conjunction with the object definition
|
|
using this type."
|
|
SYNTAX Unsigned32 (0 | 2..4094)
|
|
-- Top Level Object hierarchy
|
|
|
|
ciscoVrfMIBObjects OBJECT IDENTIFIER
|
|
::= { ciscoVrfMIB 1 }
|
|
|
|
ciscoVrfMIBNotifs OBJECT IDENTIFIER
|
|
::= { ciscoVrfMIB 0 }
|
|
|
|
ciscoVrfMIBConform OBJECT IDENTIFIER
|
|
::= { ciscoVrfMIB 2 }
|
|
|
|
cvVrf OBJECT IDENTIFIER
|
|
::= { ciscoVrfMIBObjects 1 }
|
|
|
|
cvInterface OBJECT IDENTIFIER
|
|
::= { ciscoVrfMIBObjects 2 }
|
|
|
|
cvNotifCntl OBJECT IDENTIFIER
|
|
::= { ciscoVrfMIBObjects 3 }
|
|
|
|
-- Object definitions
|
|
|
|
cvVrfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CvVrfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains entries representing a VRF - Virtual
|
|
Routing and Forwarding instance. There will be an entry for
|
|
each VRF instance created in the system."
|
|
::= { cvVrf 1 }
|
|
|
|
cvVrfEntry OBJECT-TYPE
|
|
SYNTAX CvVrfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry representing the information pertaining to a virtual
|
|
routing and forwarding instance."
|
|
INDEX { cvVrfIndex }
|
|
::= { cvVrfTable 1 }
|
|
|
|
CvVrfEntry ::= SEQUENCE {
|
|
cvVrfIndex Unsigned32,
|
|
cvVrfName SnmpAdminString,
|
|
cvVrfVnetTag CvVnetTagOrZero,
|
|
cvVrfOperStatus INTEGER,
|
|
cvVrfRouteDistProt BITS,
|
|
cvVrfStorageType StorageType,
|
|
cvVrfRowStatus RowStatus
|
|
}
|
|
|
|
cvVrfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An identifier that is assigned to each VRF and is used to
|
|
uniquely identify it. The uniqueness of this identifier is
|
|
restricted only to this device."
|
|
::= { cvVrfEntry 1 }
|
|
|
|
cvVrfName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The human-readable name of the VRF instance. This name
|
|
uniquely identifies the VRF instance in the system.
|
|
|
|
This object is mandatory for creating an entry in this table."
|
|
::= { cvVrfEntry 2 }
|
|
|
|
cvVrfVnetTag OBJECT-TYPE
|
|
SYNTAX CvVnetTagOrZero (0 | 2..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vNET tag assigned to this VRF instance.
|
|
|
|
A value of zero(0) indicates the VRF instance is not a vNET and
|
|
such vrf could be part of a VRF-Lite or MPLS deployment.
|
|
|
|
A set with a value of zero(0) will remove the vNET tag assigned
|
|
to this VRF.
|
|
|
|
The value of this object can be changed even when
|
|
cvVrfRowStatus is having a value of active(1)."
|
|
DEFVAL { 0 }
|
|
::= { cvVrfEntry 3 }
|
|
|
|
cvVrfOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes whether a VRF is operational or not. A VRF is
|
|
up(1) when at least one interface associated with the
|
|
VRF, which ifOperStatus is up(1). A VRF is down(2) when:
|
|
|
|
a. There does not exist at least one interface whose
|
|
ifOperStatus is up(1).
|
|
|
|
b. There are no interfaces associated with the VRF."
|
|
::= { cvVrfEntry 4 }
|
|
|
|
cvVrfRouteDistProt OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
none(0),
|
|
other(1),
|
|
ospf(2),
|
|
rip(3),
|
|
isis(4),
|
|
eigrp(5),
|
|
bgp(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes the route distribution protocol enabled in this
|
|
VRF. Note that more than one routing protocol may be
|
|
enabled at the same time."
|
|
::= { cvVrfEntry 5 }
|
|
|
|
cvVrfStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this entry."
|
|
::= { cvVrfEntry 6 }
|
|
|
|
cvVrfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create, modify, and/or delete a row in
|
|
this table."
|
|
::= { cvVrfEntry 7 }
|
|
|
|
|
|
|
|
cvVrfListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CvVrfListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the entries representing the VRFs in a VRF
|
|
List."
|
|
::= { cvVrf 2 }
|
|
|
|
cvVrfListEntry OBJECT-TYPE
|
|
SYNTAX CvVrfListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table represents a VRF in a VRF list. A VRF
|
|
list is a collection of VRFs grouped together. The list defined
|
|
|
|
here can be associated to a vNET trunk interface, which would
|
|
then act as a trunk carrying traffic for all VRFs in the VRF
|
|
list.
|
|
|
|
An example of a VRF List -
|
|
list1.1 = Vrf_Finance
|
|
list1.2 = Vrf_HR"
|
|
INDEX {
|
|
cvVrfListName,
|
|
cvVrfListVindex
|
|
}
|
|
::= { cvVrfListTable 1 }
|
|
|
|
CvVrfListEntry ::= SEQUENCE {
|
|
cvVrfListName SnmpAdminString,
|
|
cvVrfListVindex Unsigned32,
|
|
cvVrfListVrfIndex Unsigned32,
|
|
cvVrfListStorageType StorageType,
|
|
cvVrfListRowStatus RowStatus
|
|
}
|
|
|
|
cvVrfListName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..64))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The human-readable name of the VRF List. This name uniquely
|
|
identifies the VRF List in the system."
|
|
::= { cvVrfListEntry 1 }
|
|
|
|
cvVrfListVindex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..32)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This index uniquely identifies a VRF within the VRF list."
|
|
::= { cvVrfListEntry 2 }
|
|
|
|
cvVrfListVrfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the associated VRF in the cvVrfTable.
|
|
The value of this object is index value (cvVrfIndex)
|
|
of cvVrfTable.
|
|
|
|
The value of this object cannot be modified when the entry is
|
|
in active(1) state."
|
|
::= { cvVrfListEntry 3 }
|
|
|
|
cvVrfListStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this entry."
|
|
::= { cvVrfListEntry 4 }
|
|
|
|
cvVrfListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create, modify, and/or delete a row in
|
|
this table."
|
|
::= { cvVrfListEntry 5 }
|
|
|
|
|
|
|
|
cvVrfInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CvVrfInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the entries representing the interfaces
|
|
associated with a VRF instance."
|
|
::= { cvInterface 1 }
|
|
|
|
cvVrfInterfaceEntry OBJECT-TYPE
|
|
SYNTAX CvVrfInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table represents an interface to which a VRF
|
|
is associated. A VRF can be associated to multiple interfaces.
|
|
There will be one entry per interface for each VRF instance in
|
|
this table."
|
|
INDEX {
|
|
cvVrfIndex,
|
|
cvVrfInterfaceIndex
|
|
}
|
|
::= { cvVrfInterfaceTable 1 }
|
|
|
|
CvVrfInterfaceEntry ::= SEQUENCE {
|
|
cvVrfInterfaceIndex InterfaceIndex,
|
|
cvVrfInterfaceType CvVrfIfType,
|
|
cvVrfInterfaceVnetTagOverride CvVnetTagOrZero,
|
|
cvVrfInterfaceStorageType StorageType,
|
|
cvVrfInterfaceRowStatus RowStatus
|
|
}
|
|
|
|
cvVrfInterfaceIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a unique index for an entry in this table. A non-zero
|
|
index for an entry indicates the ifIndex for the corresponding
|
|
interface entry in the ifTable. Note that this table does not
|
|
necessarily correspond one-to-one with all entries in the
|
|
Interface MIB."
|
|
::= { cvVrfInterfaceEntry 1 }
|
|
|
|
cvVrfInterfaceType OBJECT-TYPE
|
|
SYNTAX CvVrfIfType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRF type of this interface. The type of the interface is
|
|
determined based on the VRF associated with this interface.
|
|
If the VRF is not tagged with vnet tag then the type will be
|
|
vrfEdge. If the VRF is tagged with vnet tag then it will become
|
|
vnetEdge. For vNETTrunkSI, the sub-interface in question is
|
|
automatically created for a VRF when trunking is enabled on the
|
|
main interface."
|
|
::= { cvVrfInterfaceEntry 2 }
|
|
|
|
cvVrfInterfaceVnetTagOverride OBJECT-TYPE
|
|
SYNTAX CvVnetTagOrZero (0 | 2..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object can be used to over-ride the vNET tag assigned
|
|
to the VRF traffic going through this interface. This object is
|
|
applicable only if the cvVrfInterfaceType of this interface
|
|
has a value of vNETTrunkSI(1).
|
|
|
|
By default the tagged traffic will use the value denoted by
|
|
cvVrfVnetTag of this VRF. In which case this object will
|
|
have a value of zero(0).
|
|
|
|
A set with a value of zero(0) will revert the tag assignment
|
|
behaviour to default behaviour mentioned above."
|
|
DEFVAL { 0 }
|
|
::= { cvVrfInterfaceEntry 3 }
|
|
|
|
cvVrfInterfaceStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this entry."
|
|
::= { cvVrfInterfaceEntry 4 }
|
|
|
|
cvVrfInterfaceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create, modify, and/or delete a row in
|
|
this table.
|
|
|
|
When a row is created in this table the VRF is associated to an
|
|
interface. When a row is deleted from this table the VRF is
|
|
dis-associated from the interface."
|
|
::= { cvVrfInterfaceEntry 5 }
|
|
|
|
|
|
|
|
cvInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CvInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains entries representing the interfaces on
|
|
which the vNET trunking can be enabled."
|
|
::= { cvInterface 2 }
|
|
|
|
cvInterfaceEntry OBJECT-TYPE
|
|
SYNTAX CvInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table represents an interface on which the
|
|
vNET trunking can be enabled. When an interface is enabled for
|
|
vNET trunking, it will carry the traffic for the VRFs which are
|
|
tagged with the vNET tag."
|
|
INDEX { ifIndex }
|
|
::= { cvInterfaceTable 1 }
|
|
|
|
CvInterfaceEntry ::= SEQUENCE {
|
|
cvInterfaceVnetTrunkEnabled TruthValue,
|
|
cvInterfaceVnetVrfList SnmpAdminString
|
|
}
|
|
|
|
cvInterfaceVnetTrunkEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the vNET trunking status for this
|
|
interface. When enabled for vNET trunking the interface will
|
|
carry traffic of all vNETs in the device."
|
|
DEFVAL { false }
|
|
::= { cvInterfaceEntry 1 }
|
|
|
|
cvInterfaceVnetVrfList OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0 | 1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the VRF List associated with this interface.
|
|
A non-zero length string represent a list of vNET tagged VRFs,
|
|
whose traffic will be forwarded through this interface.
|
|
A zero length string denotes that the traffic for all the vNET
|
|
tagged VRFs will be forwarded through this interface."
|
|
DEFVAL { "" }
|
|
::= { cvInterfaceEntry 2 }
|
|
|
|
|
|
|
|
-- Notification control objects
|
|
|
|
cvVrfIfNotifEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the device should generate
|
|
notifications related to VRF Interface status change."
|
|
DEFVAL { false }
|
|
::= { cvNotifCntl 1 }
|
|
|
|
cvVnetTrunkNotifEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the device should generate
|
|
notifications related to vNET Trunk Interface status change."
|
|
DEFVAL { false }
|
|
::= { cvNotifCntl 2 }
|
|
|
|
-- Notification definitions
|
|
|
|
cvVrfIfUp NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ifName,
|
|
cvVrfName,
|
|
cvVrfOperStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when:
|
|
a. The ifOperStatus of an interface associated with a VRF
|
|
changes to the up(1) state.
|
|
b. When an interface with ifOperStatus = up(1) is
|
|
associated with a VRF.
|
|
|
|
The interface is identified by ifName and the VRF is
|
|
identified by cvVrfName varbinds respectively."
|
|
::= { ciscoVrfMIBNotifs 1 }
|
|
|
|
cvVrfIfDown NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ifName,
|
|
cvVrfName,
|
|
cvVrfOperStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when:
|
|
a. The ifOperStatus of an interface associated with a VRF
|
|
changes to the down(2) state.
|
|
b. When an interface with ifOperStatus = up(1) state is
|
|
disassociated with a VRF.
|
|
|
|
The interface is identified by ifName and the VRF is
|
|
identified by cvVrfName varbinds respectively.
|
|
|
|
If all the interfaces associated with the VRF are in down(2)
|
|
state or if there are no more interfaces associated with the
|
|
VRF, then the cvVrfOperStatus will have a value of down(2)."
|
|
::= { ciscoVrfMIBNotifs 2 }
|
|
|
|
cvVnetTrunkUp NOTIFICATION-TYPE
|
|
OBJECTS { ifName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the ifOperStatus of a vNET
|
|
trunk interface changes to the up(1) state. The interface is
|
|
identified by ifName varbind. The notification will be
|
|
generated for only those interfaces for which the
|
|
cvInterfaceVnetTrunkEnabled object has a value of True(1)."
|
|
::= { ciscoVrfMIBNotifs 3 }
|
|
|
|
cvVnetTrunkDown NOTIFICATION-TYPE
|
|
OBJECTS { ifName }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the ifOperStatus of a vNET
|
|
trunk interface changes to the down(2) state. The interface is
|
|
identified by ifName varbind. The notification will be
|
|
generated for only those interfaces for which the
|
|
cvInterfaceVnetTrunkEnabled object has a value of True(1)."
|
|
::= { ciscoVrfMIBNotifs 4 }
|
|
-- Units of Conformance
|
|
|
|
cvMIBGroups OBJECT IDENTIFIER
|
|
::= { ciscoVrfMIBConform 1 }
|
|
|
|
|
|
cvMIBVrfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cvVrfOperStatus,
|
|
cvVrfStorageType,
|
|
cvVrfRowStatus,
|
|
cvVrfRouteDistProt,
|
|
cvVrfInterfaceType,
|
|
cvVrfInterfaceStorageType,
|
|
cvVrfInterfaceRowStatus,
|
|
cvVrfIfNotifEnable,
|
|
cvVrfName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for VRF and VRF-Lite management."
|
|
::= { cvMIBGroups 1 }
|
|
|
|
cvMIBVrfNotifGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
cvVrfIfUp,
|
|
cvVrfIfDown
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of VRF notifications."
|
|
::= { cvMIBGroups 2 }
|
|
|
|
cvMIBVnetGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cvVrfVnetTag,
|
|
cvVrfListVrfIndex,
|
|
cvVrfListStorageType,
|
|
cvVrfListRowStatus,
|
|
cvVrfInterfaceVnetTagOverride,
|
|
cvInterfaceVnetTrunkEnabled,
|
|
cvInterfaceVnetVrfList,
|
|
cvVnetTrunkNotifEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects needed for vNET management."
|
|
::= { cvMIBGroups 3 }
|
|
|
|
cvMIBVnetNotifGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
cvVnetTrunkUp,
|
|
cvVnetTrunkDown
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of VRF and vNET notifications."
|
|
::= { cvMIBGroups 4 }
|
|
cvMIBCompliances OBJECT IDENTIFIER
|
|
::= { ciscoVrfMIBConform 2 }
|
|
|
|
|
|
cvMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP Agents which
|
|
implement this MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
cvMIBVrfGroup,
|
|
cvMIBVrfNotifGroup
|
|
}
|
|
|
|
GROUP cvMIBVnetGroup
|
|
DESCRIPTION
|
|
"This group is required to manage vNETs."
|
|
|
|
GROUP cvMIBVnetNotifGroup
|
|
DESCRIPTION
|
|
"The group is required to provide VRF and vNET notifications."
|
|
|
|
OBJECT cvVrfVnetTag
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is enough to provide read-only access to this object even
|
|
though write access is desirable."
|
|
|
|
OBJECT cvVrfInterfaceVnetTagOverride
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is enough to provide read-only access to this object even
|
|
though write access is desirable."
|
|
|
|
OBJECT cvVrfRowStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is enough to provide read-only access to the table
|
|
containing this object even though it is desirable to use this
|
|
object to create a row in the table."
|
|
|
|
OBJECT cvVrfListRowStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is enough to provide read-only access to the table
|
|
containing this object even though it is desirable to use this
|
|
object to create a row in the table."
|
|
|
|
OBJECT cvVrfInterfaceRowStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is enough to provide read-only access to the table
|
|
containing this object even though it is desirable to use this
|
|
object to create a row in the table."
|
|
|
|
OBJECT cvInterfaceVnetTrunkEnabled
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is enough to provide read-only access to this object even
|
|
though write access is desirable."
|
|
|
|
OBJECT cvInterfaceVnetVrfList
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is enough to provide read-only access to this object even
|
|
though write access is desirable."
|
|
::= { cvMIBCompliances 1 }
|
|
|
|
END |