mibs/MIBS/cisco/CISCOSB-QOS-APPS-MIB
2023-12-05 12:25:34 +01:00

211 lines
6.2 KiB
Plaintext
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

CISCOSB-QOS-APPS-MIB DEFINITIONS ::= BEGIN
-- Title: CISCOSB QOS Applications Configuration
-- Version: 7.60.00.00
-- Date: 15-December-2015
IMPORTS
TruthValue, TEXTUAL-CONVENTION,
DisplayString, RowStatus FROM SNMPv2-TC
InetAddressType,InetAddress FROM INET-ADDRESS-MIB
switch001, rlQosApps FROM CISCOSB-MIB
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI;
rlQosApps MODULE-IDENTITY
LAST-UPDATED "201606020000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: 170 West Tasman Drive
San Jose , CA 95134-1706
USA
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
DESCRIPTION
"The private MIB module definition for QoS Applications Configuration in CISCOSB devices."
REVISION "201606020000Z"
DESCRIPTION
"Added this MODULE-IDENTITY clause."
::= { switch001 232 }
rlIscsiQos OBJECT IDENTIFIER ::= { rlQosApps 1 }
-------------------------------------------------------------------------------
-- rlIscsiQosEnable
rlIscsiQosEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable iSCSI Quality Of Service in the switch."
::= { rlIscsiQos 1 }
-------------------------------------------------------------------------------
-- rlIscsiQosDefaultFlowEnable
-- rlIscsiQosDefaultFlowEnable OBJECT-TYPE
-- SYNTAX TruthValue
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Enable/Disable Two iSCSI IPv4 flows with well-known
-- TCP ports 3260 and 860."
-- DEFVAL { true }
-- ::= { rlIscsiQos 2 }
-------------------------------------------------------------------------------
-- rlIscsiQosFlowTable
rlIscsiQosFlowTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIscsiQosFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table for configuration of iSCSI QOS."
::= { rlIscsiQos 2 }
rlIscsiQosFlowEntry OBJECT-TYPE
SYNTAX RlIscsiQosFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the rlIscsiQosFlowTable."
INDEX { rlIscsiQosFlowDestTcpPort,
rlIscsiQosFlowType,
rlIscsiQosFlowDestAddressType,
rlIscsiQosFlowDestAddress}
::= { rlIscsiQosFlowTable 1 }
RlIscsiQosFlowEntry ::= SEQUENCE {
rlIscsiQosFlowDestTcpPort INTEGER,
rlIscsiQosFlowType INTEGER,
rlIscsiQosFlowDestAddressType InetAddressType,
rlIscsiQosFlowDestAddress InetAddress,
rlIscsiQosFlowStatus RowStatus
}
rlIscsiQosFlowDestTcpPort OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The TCP port on which iSCSI targets listen to requests."
::= { rlIscsiQosFlowEntry 1 }
rlIscsiQosFlowType OBJECT-TYPE
SYNTAX INTEGER {
ipv4(1),
ipv6(2),
both(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of flow entry:
ipv4 - ipv4 flows only.
ipv6 - ipv6 flows only.
both - ipv4 and ipv6 flows."
DEFVAL { ipv4 }
::= { rlIscsiQosFlowEntry 2 }
rlIscsiQosFlowDestAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of rlIscsiQosDestAddress.
Only IPv4 is accepted in current implementation."
::= { rlIscsiQosFlowEntry 3 }
rlIscsiQosFlowDestAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address on which iSCSI targets listen to requests."
::= { rlIscsiQosFlowEntry 4 }
rlIscsiQosFlowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of a table entry."
::= { rlIscsiQosFlowEntry 5 }
-------------------------------------------------------------------------------
-- rlIscsiQosProfileTable
rlIscsiQosProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIscsiQosProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table for configuration of iSCSI QOS Profile."
::= { rlIscsiQos 3 }
rlIscsiQosProfileEntry OBJECT-TYPE
SYNTAX RlIscsiQosProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the rlIscsiQosProfileTable."
INDEX { rlIscsiQosProfileIndex }
::= { rlIscsiQosProfileTable 1 }
RlIscsiQosProfileEntry ::= SEQUENCE {
rlIscsiQosProfileIndex INTEGER,
rlIscsiQosProfileVpt INTEGER,
rlIscsiQosProfileDscp INTEGER,
rlIscsiQosProfileQueue INTEGER,
rlIscsiQosProfileStatus RowStatus
}
rlIscsiQosProfileIndex OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of a table entry."
::= { rlIscsiQosProfileEntry 1 }
rlIscsiQosProfileVpt OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN Priority Tag (VPT) that iSCSI tagged frames are
assigned with (Range: 0-7)."
::= { rlIscsiQosProfileEntry 2 }
rlIscsiQosProfileDscp OBJECT-TYPE
SYNTAX INTEGER(0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Differentiated Services Code Point (DSCP) that iSCSI frames are
assigned with (Range: 063)."
::= { rlIscsiQosProfileEntry 3 }
rlIscsiQosProfileQueue OBJECT-TYPE
SYNTAX INTEGER(1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The outgoing queue that iSCSI frames are sent to (Range: 18)."
::= { rlIscsiQosProfileEntry 4 }
rlIscsiQosProfileStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of a table entry."
::= { rlIscsiQosProfileEntry 5 }
END