945 lines
31 KiB
Plaintext
945 lines
31 KiB
Plaintext
CISCOSB-SNMP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
switch001 FROM CISCOSB-MIB
|
|
OBJECT-TYPE, MODULE-IDENTITY, TimeTicks, Integer32 FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, DisplayString, AutonomousType FROM SNMPv2-TC
|
|
RowStatus, TruthValue, TimeInterval FROM SNMPv2-TC
|
|
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
|
|
snmpTargetAddrExtEntry FROM SNMP-COMMUNITY-MIB
|
|
SnmpEngineID, SnmpAdminString FROM SNMP-FRAMEWORK-MIB
|
|
usmUserEntry FROM SNMP-USER-BASED-SM-MIB;
|
|
|
|
rlSNMP MODULE-IDENTITY
|
|
LAST-UPDATED "202105190000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
|
|
CONTACT-INFO
|
|
"Postal: 170 West Tasman Drive
|
|
San Jose , CA 95134-1706
|
|
USA
|
|
|
|
|
|
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
|
|
|
|
DESCRIPTION
|
|
"Private MIB module for SNMP support in CISCOSB devices."
|
|
REVISION "202105190000Z"
|
|
DESCRIPTION
|
|
"Added support in usmUserTable augment for authentication and
|
|
privacy passwords saving."
|
|
REVISION "201002150000Z"
|
|
DESCRIPTION
|
|
"1. Changed SYNTAX of rlSnmpEngineID from
|
|
OCTET STRING (SIZE(5..32))to SnmpEngineID.
|
|
2. Added rlInet2EngineIdTable."
|
|
REVISION "200709100000Z"
|
|
DESCRIPTION
|
|
"Added rlEvents MIB."
|
|
REVISION "200606060000Z"
|
|
DESCRIPTION
|
|
"Added rlSNMPenable object."
|
|
REVISION "0410200000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB."
|
|
::= { switch001 98 }
|
|
|
|
rlSNMPv3 OBJECT IDENTIFIER ::= { rlSNMP 1 }
|
|
|
|
rlTargetParamsTestingLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(1),
|
|
high(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The level of the tests done when configuring an entry in the snmpTargetParamsTable."
|
|
::= { rlSNMPv3 1 }
|
|
|
|
rlNotifyFilterTestingLevel OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
low(1),
|
|
high(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The level of the tests done when configuring an entry in the snmpNotifyFilterTable."
|
|
::= { rlSNMPv3 2 }
|
|
|
|
rlSnmpEngineID OBJECT-TYPE
|
|
SYNTAX SnmpEngineID
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A variable for setting the router's local engineID value.
|
|
Setting this variable will effect the value of snmpEngineID. Setting this
|
|
variable to the value '00 00 00 00 00'H will cause snmpEngineID to get
|
|
an automatically created value based on the device basic MAC address.
|
|
This method of setting the agent's engineID is recommended for stand-alone
|
|
systems. Setting this variable to any other (valid) value will set snmpEngineID
|
|
to this value. Setting this variable to all 'ff'H or all zeros is not
|
|
allowed, with the exception of the value '00 00 00 00 00'H.
|
|
The last method is recommended for stackable system, in order for the
|
|
engineID to be unique within an administrative domain.
|
|
Setting this value (to a value different then the default value)
|
|
is required before configuring users data in usmUserTable and
|
|
vacmSecurityToGroupTable.
|
|
Changing the value of this variable has 2 side-effects:
|
|
- All user data will be deleted, including: all usmUserTable configured entries and
|
|
vacmSecurityToGroupTable entries where vacmSecurityModel = 3.
|
|
- All snmpCommunityTable entries with snmpCommunityContextEngineID value
|
|
equal to old rlSnmpEngineID value, will be updated with the new
|
|
rlSnmpEngineID value."
|
|
DEFVAL { '0000000001'H }
|
|
::= { rlSNMPv3 3 }
|
|
|
|
rlSNMPv3IpAddrToIndexTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSNMPv3IpAddrToIndexEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table maps ip addresses to indices. The output index
|
|
is used as a component in some SNMPv3 tables fields (for example:
|
|
snmpTargetAddrName). Ipv4 addresses are not supported by this table.
|
|
Note: in getNext operations on this table, only mappings which are in use
|
|
in snmpTargetAddrTable (using rlTargetAddrMagicUsedInIndex) will be retreived.
|
|
The mapped index does not include delimiters which are forbidden
|
|
in SNMPv3 tag values (and thus can be used in tag fields). "
|
|
::= { rlSNMPv3 4 }
|
|
|
|
rlSNMPv3IpAddrToIndexEntry OBJECT-TYPE
|
|
SYNTAX RlSNMPv3IpAddrToIndexEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX { rlSNMPv3IpAddrToIndexAddrType,
|
|
rlSNMPv3IpAddrToIndexAddr }
|
|
::= { rlSNMPv3IpAddrToIndexTable 1 }
|
|
|
|
RlSNMPv3IpAddrToIndexEntry ::= SEQUENCE {
|
|
rlSNMPv3IpAddrToIndexAddrType InetAddressType,
|
|
rlSNMPv3IpAddrToIndexAddr InetAddress,
|
|
rlSNMPv3IpAddrToIndexMappedIndex OCTET STRING
|
|
}
|
|
|
|
rlSNMPv3IpAddrToIndexAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of NMS IP address."
|
|
::= { rlSNMPv3IpAddrToIndexEntry 1 }
|
|
|
|
rlSNMPv3IpAddrToIndexAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NMS IP address."
|
|
::= { rlSNMPv3IpAddrToIndexEntry 2 }
|
|
|
|
rlSNMPv3IpAddrToIndexMappedIndex OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index mapped for this row ip address."
|
|
::= { rlSNMPv3IpAddrToIndexEntry 3 }
|
|
|
|
rlTargetAddrExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlTargetAddrExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table extends rlTargetAddrExtEntry. "
|
|
::= { rlSNMPv3 5 }
|
|
|
|
rlTargetAddrExtEntry OBJECT-TYPE
|
|
SYNTAX RlTargetAddrExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
AUGMENTS { snmpTargetAddrExtEntry }
|
|
::= { rlTargetAddrExtTable 1 }
|
|
|
|
RlTargetAddrExtEntry ::= SEQUENCE {
|
|
rlTargetAddrMagicUsedInIndex OCTET STRING
|
|
}
|
|
|
|
rlTargetAddrMagicUsedInIndex OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0 | 4))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this field to a 4 octets length value means that ip mapping (using rlSNMPv3IpAddrToIndexTable)
|
|
is used for this row. If such a mapping is not used, a 0-length octet string
|
|
value should be used for this field (this is also the default).
|
|
This field value is determined only once, upon creation of an entry in the
|
|
snmpTargetAddrTable. A change in its value while updating an existing entry
|
|
is ignored.
|
|
Prior to creating a snmpTargetAddrTable entry with a 4 octets length value for
|
|
this field, the rlSNMPv3IpAddrToIndexTable must be used in order to retrieve
|
|
this value."
|
|
DEFVAL { "" }
|
|
::= { rlTargetAddrExtEntry 1 }
|
|
|
|
rlInet2EngineIdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlInet2EngineIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table maps inet addresses to SNMPv3 engine identifiers. "
|
|
::= { rlSNMPv3 6 }
|
|
|
|
rlInet2EngineIdEntry OBJECT-TYPE
|
|
SYNTAX RlInet2EngineIdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX { rlInet2EngineIdAddressType, rlInet2EngineIdAddress}
|
|
::= { rlInet2EngineIdTable 1 }
|
|
|
|
RlInet2EngineIdEntry ::= SEQUENCE {
|
|
rlInet2EngineIdAddressType InetAddressType,
|
|
rlInet2EngineIdAddress InetAddress,
|
|
rlInet2EngineIdEngineId SnmpEngineID,
|
|
rlInet2EngineIdStatus RowStatus
|
|
}
|
|
|
|
rlInet2EngineIdAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Inet address type of the mapped inet address."
|
|
::= { rlInet2EngineIdEntry 1 }
|
|
|
|
rlInet2EngineIdAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mapped inet address."
|
|
::= { rlInet2EngineIdEntry 2 }
|
|
|
|
rlInet2EngineIdEngineId OBJECT-TYPE
|
|
SYNTAX SnmpEngineID
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMPv3 engine id to which the address denoted by rlInet2EngineIdAddressType and rlInet2EngineIdAddress is mapped."
|
|
::= { rlInet2EngineIdEntry 3 }
|
|
|
|
rlInet2EngineIdStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management control for this table."
|
|
DEFVAL { createAndGo }
|
|
::= { rlInet2EngineIdEntry 4 }
|
|
|
|
|
|
rlSNMPDomains OBJECT IDENTIFIER ::= { rlSNMP 2 }
|
|
|
|
rlSnmpUDPMridDomain OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMPv2 over UDP transport domain, used when Multi-Instance Router
|
|
is supported (more than one MIR instance exist).
|
|
The corresponding transport address is of type RlSnmpUDPMridAddress."
|
|
::= { rlSNMPDomains 1 }
|
|
|
|
RlSnmpUDPMridAddress ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "1d.1d.1d.1d/2d/2d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the UDP address of NMS and the MRID through which it is
|
|
connected in order to access the agent:
|
|
octets contents encoding
|
|
1-4 IP-address network-byte order
|
|
5-6 UDP-port network-byte order
|
|
7-8 MRID network-byte order
|
|
"
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
|
|
rlSnmpUdpIpv6MridDomain OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMPv2 over UDP over IPv6 transport domain, used when Multi-Instance Router
|
|
is supported (more than one MIR instance exist).
|
|
The corresponding transport address is of type RlSnmpUDPIpv6MridAddress
|
|
for global IPv6 addresses."
|
|
::= { rlSNMPDomains 2 }
|
|
|
|
RlSnmpUDPIpv6MridAddress ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "0a[2x:2x:2x:2x:2x:2x:2x:2x]0a:2d:2d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the UDP address of NMS and the MRID through which it is
|
|
connected in order to access the agent:
|
|
octets contents encoding
|
|
1-16 IPv6 address network-byte order
|
|
17-18 UDP-port network-byte order
|
|
19-20 MRID network-byte order "
|
|
SYNTAX OCTET STRING (SIZE (20))
|
|
|
|
rlSnmpUdpIpv6zMridDomain OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMPv2 over UDP over IPv6 transport domain, used when Multi-Instance Router
|
|
is supported (more than one MIR instance exist).
|
|
The corresponding transport address is of type RlSnmpUDPIpv6zMridAddress
|
|
for scoped IPv6 addresses with a zone index."
|
|
::= { rlSNMPDomains 3 }
|
|
|
|
RlSnmpUDPIpv6zMridAddress ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "0a[2x:2x:2x:2x:2x:2x:2x:2x%4d]0a:2d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the UDP address of NMS (consisting of an IPv6 address,
|
|
a zone index and a port number) and the MRID through which it is
|
|
connected in order to access the agent:
|
|
octets contents encoding
|
|
1-16 IPv6 address network-byte order
|
|
17-20 zone index network-byte order
|
|
21-22 UDP-port network-byte order
|
|
23-24 MRID network-byte order "
|
|
SYNTAX OCTET STRING (SIZE (24))
|
|
|
|
|
|
rlSnmpRequestMridTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSnmpRequestMridEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table for determining the Mrid for the current SNMP request."
|
|
::= { rlSNMP 3 }
|
|
|
|
rlSnmpRequestMridEntry OBJECT-TYPE
|
|
SYNTAX RlSnmpRequestMridEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX { rlSnmpRequestManagedMrid }
|
|
::= { rlSnmpRequestMridTable 1 }
|
|
|
|
RlSnmpRequestMridEntry ::= SEQUENCE {
|
|
rlSnmpRequestManagedMrid INTEGER,
|
|
rlSnmpRequestMridStatus INTEGER }
|
|
|
|
rlSnmpRequestManagedMrid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router instance the NMS wants to manage in the current SNMP request.
|
|
The value of this object, when attaching a variable instance of the
|
|
rlSnmpRequestManagedMridTable to an SNMP request, will determine the
|
|
managed Mrid for this request.
|
|
It is important to mention that the variable insance must be attached
|
|
as the first variable in the PDU in order to influence all variables."
|
|
::= { rlSnmpRequestMridEntry 1 }
|
|
|
|
rlSnmpRequestMridStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this entry."
|
|
::= { rlSnmpRequestMridEntry 2 }
|
|
|
|
rlSNMPenable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables or disables SNMP."
|
|
DEFVAL { enable }
|
|
::= { rlSNMP 4 }
|
|
|
|
rndCommunityInetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RndCommunityInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The community table of the agent"
|
|
::= { rlSNMP 5 }
|
|
|
|
rndCommunityInetEntry OBJECT-TYPE
|
|
SYNTAX RndCommunityInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX { rndCommunityInetMngStationAddrType, rndCommunityInetMngStationAddr,
|
|
IMPLIED rndCommunityInetString }
|
|
::= { rndCommunityInetTable 1 }
|
|
|
|
RndCommunityInetEntry ::= SEQUENCE {
|
|
rndCommunityInetMngStationAddrType InetAddressType,
|
|
rndCommunityInetMngStationAddr InetAddress,
|
|
rndCommunityInetString DisplayString,
|
|
rndCommunityInetAccess INTEGER,
|
|
rndCommunityInetTrapsEnable INTEGER,
|
|
rndCommunityInetStatus INTEGER,
|
|
rndCommunityInetPortSecurity INTEGER,
|
|
rndCommunityInetOwner DisplayString,
|
|
rndCommunityInetTrapDestPort INTEGER,
|
|
rndCommunityInetAltAddrType InetAddressType,
|
|
rndCommunityInetAltAddr InetAddress
|
|
|
|
}
|
|
|
|
rndCommunityInetMngStationAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address type of the management station that will be allowed to
|
|
communicate with the agent IP address"
|
|
::= { rndCommunityInetEntry 1 }
|
|
|
|
|
|
rndCommunityInetMngStationAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Address of the management station that will be allowed to
|
|
communicate with the agent IP address"
|
|
::= { rndCommunityInetEntry 2 }
|
|
|
|
rndCommunityInetString OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..20))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The community string with which the management
|
|
station will communicate with the agent"
|
|
::= { rndCommunityInetEntry 3 }
|
|
|
|
rndCommunityInetAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
readOnly(1),
|
|
readWrite(2),
|
|
super(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The allowed access to this management station"
|
|
::= { rndCommunityInetEntry 4}
|
|
|
|
rndCommunityInetTrapsEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
snmpV1(1),
|
|
snmpV2(2),
|
|
snmpV3(3),
|
|
trapsDisable(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Should the agent send traps to the management station,
|
|
and what version is required"
|
|
::= { rndCommunityInetEntry 5 }
|
|
|
|
rndCommunityInetStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
invalid(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this entry. If the status is invalid the
|
|
community entry will be deleted"
|
|
::= { rndCommunityInetEntry 6 }
|
|
|
|
rndCommunityInetPortSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If enabled the device will only receive SNMP messages from the port,
|
|
through which this NMS is reachable from the device."
|
|
DEFVAL { disabled }
|
|
::= { rndCommunityInetEntry 7 }
|
|
|
|
rndCommunityInetOwner OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The owner of this community"
|
|
::= { rndCommunityInetEntry 8 }
|
|
|
|
rndCommunityInetTrapDestPort OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transport protocol (usually UDP) port to which traps to the
|
|
management station represebted by this entry will be sent. The default
|
|
is the well-known IANA assigned port number for SNMP traps.
|
|
This object is relevant only if rndCommunityInetTrapsEnable has a value
|
|
different from trapsDisable."
|
|
DEFVAL { 162 }
|
|
::= { rndCommunityInetEntry 9 }
|
|
|
|
rndCommunityInetAltAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For testing purposes"
|
|
::= { rndCommunityInetEntry 10 }
|
|
|
|
|
|
rndCommunityInetAltAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For testing purposes"
|
|
::= { rndCommunityInetEntry 11 }
|
|
|
|
rlMridInetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlMridInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MRID related configurations table of the agent"
|
|
::= { rlSNMP 6 }
|
|
|
|
rlMridInetEntry OBJECT-TYPE
|
|
SYNTAX RlMridInetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX { rndCommunityInetMngStationAddrType, rndCommunityInetMngStationAddr,
|
|
IMPLIED rndCommunityInetString }
|
|
::= { rlMridInetTable 1 }
|
|
|
|
RlMridInetEntry ::= SEQUENCE {
|
|
rlMridInetConnection INTEGER,
|
|
rlInetManagedMrid INTEGER
|
|
}
|
|
|
|
rlMridInetConnection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router instance connecting the NMS who accessed the agent
|
|
through the community table entry corresponding to the keys of this entry."
|
|
::= { rlMridInetEntry 1 }
|
|
|
|
rlInetManagedMrid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router instance currently managed by the NMS who accessed the agent
|
|
through the community table entry corresponding to the keys of this entry "
|
|
::= { rlMridInetEntry 2 }
|
|
|
|
rlEvents OBJECT IDENTIFIER ::= { rlSNMP 7 }
|
|
|
|
rlEventsPollerId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The rlEventsPollerId is the 1st key in all the rlEvents tables. Each poller must first GET from this
|
|
object his Id. The agent will ensure uniqueness."
|
|
::= { rlEvents 1 }
|
|
|
|
rlEventsDefaultPollingInterval OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default polling time. Will be used to detrermined whether the events configured by a poller in
|
|
rlEventsTable can be destroyed, in absence of an entry for this poller in the rlEventsPollingControlTable."
|
|
::= { rlEvents 2 }
|
|
|
|
|
|
rlEventsDeleteEvents OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" SETting a id of an active poller will cause all the rows of this poller in the rlEventsTable
|
|
to be destroyed. This is equivalent to SETting rlEventsStatus of each row of this poller to 'destroy'.
|
|
GET operation on this variable is meaningless, and the value 0 will be returned in this case (actual
|
|
pollers start from 1)."
|
|
::= { rlEvents 3 }
|
|
|
|
|
|
rlEventsMaskTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlEventsMaskEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table showing the events mask for each client."
|
|
::= { rlEvents 4 }
|
|
|
|
rlEventsMaskEntry OBJECT-TYPE
|
|
SYNTAX RlEventsMaskEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX { rlEventsMaskPollerId }
|
|
::= { rlEventsMaskTable 1 }
|
|
|
|
|
|
RlEventsMaskEntry ::= SEQUENCE {
|
|
rlEventsMaskPollerId INTEGER,
|
|
rlEventsMaskMask OCTET STRING
|
|
}
|
|
|
|
rlEventsMaskPollerId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The poller id whose events are shown in this table "
|
|
::= { rlEventsMaskEntry 1 }
|
|
|
|
|
|
rlEventsMaskMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The semantics of the rlEventsMask is an array of timestamps (each 4 octets
|
|
containing one time stamp). Each timestamp is in TimeTicks units encoded in network order.
|
|
Thus the mask can contain up to 40 timestamps. If a place in the array is empty it will contain
|
|
0.
|
|
Each timestamp shows the time of the last occurrence of the event whose
|
|
rlEventIndexKey in the rlEventsTable for this client id is the same as its index in the array.
|
|
Each for bytes of the rlEventsMask will contain the timestamp in TimeTicks
|
|
units encoded in network order of the last time the event "
|
|
::= { rlEventsMaskEntry 2 }
|
|
|
|
rlEventsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlEventsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table relating the events recorded to the indices in the rlEventsMask."
|
|
::= { rlEvents 5 }
|
|
|
|
rlEventsEntry OBJECT-TYPE
|
|
SYNTAX RlEventsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX { rlEventsPoller, IMPLIED rlEventId }
|
|
::= { rlEventsTable 1 }
|
|
|
|
|
|
RlEventsEntry ::= SEQUENCE {
|
|
rlEventsPoller INTEGER,
|
|
rlEventId OBJECT IDENTIFIER,
|
|
rlEventIndexInMask INTEGER,
|
|
rlEventsStatus RowStatus
|
|
}
|
|
|
|
rlEventsPoller OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The poller id whose event definitions are shown in this table."
|
|
::= { rlEventsEntry 1 }
|
|
|
|
rlEventId OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The event id of the polled event. This is the notification object identifier (in case of a
|
|
SNMPV2 notification) or the translation to SNMPv2 notation of an SNMPv1 trap according to the RFC 3584
|
|
(SNMP versions coexistence)."
|
|
::= { rlEventsEntry 2 }
|
|
|
|
rlEventIndexInMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index in the rlEventsMaskMask of this poller id that has been allocated for this event by the device."
|
|
::= { rlEventsEntry 3 }
|
|
|
|
rlEventsStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RowStatus for this table. Note that the device may refuse for resource shortage reasons to honour a create request
|
|
for this poller even if apparently there still is room in his rlEventsMaskMask (i.e. the poller has requested
|
|
monitoring of less than 40 events). "
|
|
::= { rlEventsEntry 4 }
|
|
|
|
|
|
rlEventsPollingControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlEventsPollingControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The polling control table for a poller. Currently contain only the polling interval."
|
|
::= { rlEvents 6 }
|
|
|
|
rlEventsPollingControlEntry OBJECT-TYPE
|
|
SYNTAX RlEventsPollingControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX { rlEventsPollingControlPollerId }
|
|
::= { rlEventsPollingControlTable 1 }
|
|
|
|
|
|
RlEventsPollingControlEntry ::= SEQUENCE {
|
|
rlEventsPollingControlPollerId INTEGER,
|
|
rlEventsPollingControlPollingInterval TimeTicks
|
|
}
|
|
|
|
rlEventsPollingControlPollerId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The poller id whose polling controls are shown in this table."
|
|
::= { rlEventsPollingControlEntry 1 }
|
|
|
|
|
|
rlEventsPollingControlPollingInterval OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The desired polling interval for this poller. If the device has determined that the poller has not
|
|
polled the device for 3 times this polling interval it may destroy all the data related to this poller
|
|
in the rlevents database "
|
|
::= { rlEventsPollingControlEntry 2 }
|
|
|
|
|
|
rlUsmUserExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlUsmUserExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table extends usmUserEntry. "
|
|
::= { rlSNMPv3 8 }
|
|
|
|
rlUsmUserExtEntry OBJECT-TYPE
|
|
SYNTAX RlUsmUserExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
AUGMENTS { usmUserEntry }
|
|
::= { rlUsmUserExtTable 1 }
|
|
|
|
RlUsmUserExtEntry ::= SEQUENCE {
|
|
rlUsmUserAuthPassword DisplayString,
|
|
rlUsmUserPrivPassword DisplayString
|
|
}
|
|
|
|
rlUsmUserAuthPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication password.
|
|
Setting the field to a non zero-length value will convert the given password
|
|
to a localized authentication key, appropriate to the corresponding
|
|
usmUserAuthProtocol field. The key is localized using the appropriate
|
|
usmUserEngineID field, according to the algorithm specified in RFC 2574.
|
|
This field may be set to a non zero-length value if the following conditions hold:
|
|
1) This is the creation of the entry.
|
|
2) The value of the corresponding usmUserCloneFrom field is zeroDotZero.
|
|
Setting the field in any other case will cause no effect."
|
|
DEFVAL { "" }
|
|
::= { rlUsmUserExtEntry 1 }
|
|
|
|
|
|
rlUsmUserPrivPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Privacy password.
|
|
Setting the field to a non zero-length value will convert the given password
|
|
to a localized privacy key, appropriate to the corresponding
|
|
usmUserAuthProtocol field. The key is localized using the appropriate
|
|
usmUserEngineID field, according to the algorithm specified in RFC 2574.
|
|
This field may be set to a non zero-length value if the following conditions hold:
|
|
1) This is the creation of the entry.
|
|
2) The value of the corresponding usmUserCloneFrom field is zeroDotZero.
|
|
Setting the field in any other case will cause no effect."
|
|
DEFVAL { "" }
|
|
::= { rlUsmUserExtEntry 2 }
|
|
|
|
|
|
rlSnmpClient OBJECT IDENTIFIER ::= { rlSNMP 8 }
|
|
|
|
rlSnmpClientAgentsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlSnmpClientAgentsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table maintains the user agents to which the SNMP client will send requests"
|
|
::= { rlSnmpClient 1 }
|
|
|
|
rlSnmpClientAgentsEntry OBJECT-TYPE
|
|
SYNTAX RlSnmpClientAgentsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX { rlSnmpClientAgentsAddressType, rlSnmpClientAgentsAddress }
|
|
::= { rlSnmpClientAgentsTable 1 }
|
|
|
|
RlSnmpClientAgentsEntry ::= SEQUENCE {
|
|
rlSnmpClientAgentsAddressType InetAddressType,
|
|
rlSnmpClientAgentsAddress InetAddress,
|
|
rlSnmpClientAgentsCommunity OCTET STRING,
|
|
rlSnmpClientAgentsUsername SnmpAdminString,
|
|
rlSnmpClientAgentsAuthProtocol AutonomousType,
|
|
rlSnmpClientAgentsPrivProtocol AutonomousType,
|
|
rlSnmpClientAgentsAuthKey OCTET STRING,
|
|
rlSnmpClientAgentsPrivKey OCTET STRING,
|
|
rlSnmpClientAgentsTimeout TimeInterval,
|
|
rlSnmpClientAgentsRetries Integer32,
|
|
rlSnmpClientAgentsStatus RowStatus
|
|
}
|
|
|
|
rlSnmpClientAgentsAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of Remote Agent IP address."
|
|
::= { rlSnmpClientAgentsEntry 1 }
|
|
|
|
rlSnmpClientAgentsAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Agent IP address."
|
|
::= { rlSnmpClientAgentsEntry 2 }
|
|
|
|
rlSnmpClientAgentsCommunity OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Agent SNMPv1/v2 community string. Either this field or rlSnmpClientAgentsUsername
|
|
must be configured to a non-empty string."
|
|
DEFVAL { "" }
|
|
::= { rlSnmpClientAgentsEntry 3 }
|
|
|
|
rlSnmpClientAgentsUsername OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Agent SNMPv3 username string."
|
|
DEFVAL { "" }
|
|
::= { rlSnmpClientAgentsEntry 4 }
|
|
|
|
rlSnmpClientAgentsAuthProtocol OBJECT-TYPE
|
|
SYNTAX AutonomousType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Agent SNMPv3 authentication protocol."
|
|
DEFVAL { usmNoAuthProtocol }
|
|
::= { rlSnmpClientAgentsEntry 5 }
|
|
|
|
rlSnmpClientAgentsPrivProtocol OBJECT-TYPE
|
|
SYNTAX AutonomousType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Agent SNMPv3 privacy protocol."
|
|
DEFVAL { usmNoPrivProtocol }
|
|
::= { rlSnmpClientAgentsEntry 6 }
|
|
|
|
rlSnmpClientAgentsAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Agent SNMPv3 authentication key. The key size should be consistent
|
|
with the chosen authentication protocol."
|
|
DEFVAL { "" }
|
|
::= { rlSnmpClientAgentsEntry 7 }
|
|
|
|
rlSnmpClientAgentsPrivKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Agent SNMPv3 privacy key. The key size should be consistent
|
|
with the chosen privacy protocol."
|
|
DEFVAL { "" }
|
|
::= { rlSnmpClientAgentsEntry 8 }
|
|
|
|
rlSnmpClientAgentsTimeout OBJECT-TYPE
|
|
SYNTAX TimeInterval
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default timeout between 2 successive retries of sending SNMP requests to
|
|
the agent. An application using the SNMP client may provide its own timeout
|
|
value."
|
|
DEFVAL { 1500 }
|
|
::= { rlSnmpClientAgentsEntry 9 }
|
|
|
|
rlSnmpClientAgentsRetries OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default number of retries the SNMP client should preform, in case no
|
|
response is received from the agent. An application using the SNMP client
|
|
may provide its own retries value. "
|
|
DEFVAL { 3 }
|
|
::= { rlSnmpClientAgentsEntry 10 }
|
|
|
|
rlSnmpClientAgentsStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management control for this table."
|
|
DEFVAL { createAndGo }
|
|
::= { rlSnmpClientAgentsEntry 11 }
|
|
|
|
|
|
END
|