mibs/MIBS/comware/HH3C-TUNNEL-MIB
2023-12-05 12:25:34 +01:00

1284 lines
43 KiB
Plaintext
Raw Permalink Blame History

-- =================================================================
-- Copyright (c) 2004-2019 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description: Generic Routing Encapsulation configuration MIB
-- Reference: INET-ADDRESS-MIB, IPV6-FLOW-LABEL-MIB, IF-MIB
-- Version: V1.4
-- History:
-- V1.0 created by Sun Ludong
-- 2005-06-04 Initial version
-- V1.1 modified by Zhao Chongri
-- 2012-10-23 add table hh3cTunnelEviTable and hh3cTunnelEviLinkTable
-- modified by Zhao Wenpeng
-- 2013-02-28 add table hh3cTunnelGreTable
-- V1.2 modified by Yang Chao
-- 2013-11-22 added tables hh3cTunnelVxlanIfTable, hh3cTunnelVxlanConfigGroup,
-- hh3cTunnelAvailableIDGroup and hh3cTunnelTotalNumTable
-- modified by Zhao Chongri
-- 2014-4-9 added table hh3cTunnelNvgreIfTable
-- V1.3 modified by Lei Lei
-- 2018-6-13 added table hh3cTunnelDestinationTable
-- V1.4 modified by Geng Shi Xin
-- 2019-04-08 added table hh3cTunnelGrep2mpStatsTable
-- =================================================================
HH3C-TUNNEL-MIB DEFINITIONS ::= BEGIN
IMPORTS
hh3cCommon
FROM HH3C-OID-MIB
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Counter64
FROM SNMPv2-SMI
RowStatus, TruthValue, TEXTUAL-CONVENTION
FROM SNMPv2-TC
InetAddressType, InetAddress, InetAddressIPv4
FROM INET-ADDRESS-MIB
IPv6FlowLabelOrAny
FROM IPV6-FLOW-LABEL-MIB
ifIndex, InterfaceIndexOrZero, InterfaceIndex
FROM IF-MIB;
hh3cTunnel MODULE-IDENTITY
LAST-UPDATED
"201806130000Z" -- Jun 13, 2018 at 00:00 GMT
ORGANIZATION
"New H3C Tech. Co., Ltd."
CONTACT-INFO
"Platform Team New H3C Tech. Co., Ltd.
Hai-Dian District Beijing P.R. China
http://www.h3c.com
Zip:100085
"
DESCRIPTION
"Added hh3cTunnelDestinationTable."
REVISION
"201806130000Z" -- Jun 13, 2018 at 00:00 GMT
DESCRIPTION
"This MIB contains objects to Manage configuration and Monitor tunnel.
"
REVISION
"201302280000Z" -- Feb 28, 2013 at 00:00 GMT
DESCRIPTION
"The initial revision of this MIB module.
"
::= { hh3cCommon 53 }
Hh3cTunnelType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Tunnel type definition.
"
SYNTAX INTEGER {
other(1), -- none of the following
direct(2), -- no intermediate header
gre(3), -- GRE encapsulation
minimal(4), -- Minimal encapsulation
l2tp(5), -- L2TP encapsulation
pptp(6), -- PPTP encapsulation
l2f(7), -- L2F encapsulation
udp(8), -- UDP encapsulation
atmp(9), -- ATMP encapsulation
msdp(10), -- MSDP encapsulation
sixToFour(11), -- 6to4 encapsulation
sixOverFour(12), -- 6over4 encapsulation
isatap(13), -- ISATAP encapsulation
teredo(14), -- Teredo encapsulation
tunnelModeReserve(35), -- 15 to 35 are reserved
tunnelModeIPv4Gre(36), -- GRE tunnel, IPv4 as transport protocol
tunnelModeIPv6Gre(37), -- GRE tunnel, IPv6 as transport protocol
tunnelModeIPv4IPv4(38), -- IPv4 over IPv4 tunnel
tunnelModeIPv4IPv6Config(39), -- IPv6 over IPv4 manual tunnel
tunnelModeIPv4IPv6Auto(40), -- IPv6 over IPv4 auto tunnel
tunnelModeIPv4IPv66to4(41), -- IPv6 over IPv4 6to4 tunnel
tunnelModeIPv4IPv6Isatap(42), -- IPv6 over IPv4 isatap tunnel
tunnelModeIPv6IPv4(43), -- IPv4 over IPv6
tunnelModeIPv6IPv6(44), -- IPv6 over IPv6 tunnel
tunnelModeIPv4UdpDVPN(45), -- IPv4 DVPN tunnel<65><6C>UDP method
tunnelModeIPv4GreDVPN(46), -- IPv4 DVPN tunnel<65><6C>GRE method
tunnelModeIPv6UdpDVPN(47), -- IPv6 DVPN tunnel<65><6C>UDP method
tunnelModeIPv6GreDVPN(48), -- IPv6 DVPN tunnel<65><6C>GRE method
tunnelModeCrLsp(49), -- IPv4 CRLSP tunnel
tunnelModeMax(50),
tunnelModeIPv4UdpVxlan(51), -- IPv4 VXLAN tunnel, UDP method
tunnelModeIPv6UdpVxlan(52), -- IPv6 VXLAN tunnel, UDP method
tunnelModeIPv4NVGRE(53), -- IPv4 NVGRE tunnel
tunnelModeIPv6NVGRE(54) -- IPv6 NVGRE tunnel
}
hh3cTunnelMIBObjects OBJECT IDENTIFIER ::= { hh3cTunnel 1 }
hh3cTunnelTables OBJECT IDENTIFIER ::= { hh3cTunnelMIBObjects 1 }
hh3cTunnelIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cTunnelIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing information on configured tunnels.
"
::= { hh3cTunnelTables 1 }
hh3cTunnelIfEntry OBJECT-TYPE
SYNTAX Hh3cTunnelIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the information on a
particular configured tunnel.
"
INDEX { ifIndex }
::= { hh3cTunnelIfTable 1 }
Hh3cTunnelIfEntry ::= SEQUENCE {
hh3cTunnelIfEncapsMethod Hh3cTunnelType,
hh3cTunnelIfHopLimit Integer32,
hh3cTunnelIfSecurity INTEGER,
hh3cTunnelIfTOS Integer32,
hh3cTunnelIfFlowLabel IPv6FlowLabelOrAny,
hh3cTunnelIfAddressType InetAddressType,
hh3cTunnelIfLocalInetAddress InetAddress,
hh3cTunnelIfRemoteInetAddress InetAddress,
hh3cTunnelIfEncapsLimit Integer32
}
hh3cTunnelIfEncapsMethod OBJECT-TYPE
SYNTAX Hh3cTunnelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The encapsulation method used by the tunnel.
"
::= { hh3cTunnelIfEntry 3 }
hh3cTunnelIfHopLimit OBJECT-TYPE
SYNTAX Integer32 (0 | 1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv4 TTL or IPv6 Hop Limit to use in the outer IP
header. A value of 0 indicates that the value is
copied from the payload's header.
"
::= { hh3cTunnelIfEntry 4 }
hh3cTunnelIfSecurity OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no security
ipsec(2), -- IPsec security
other(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The method used by the tunnel to secure the outer IP
header. The value ipsec indicates that IPsec is used
between the tunnel endpoints for authentication or
encryption or both. More specific security-related
information may be available in a MIB module for the
security protocol in use.
"
::= { hh3cTunnelIfEntry 5 }
hh3cTunnelIfTOS OBJECT-TYPE
SYNTAX Integer32 (-2..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The method used to set the high 6 bits (the
differentiated services codepoint) of the IPv4 TOS or
IPv6 Traffic Class in the outer IP header. A value of
-1 indicates that the bits are copied from the
payload's header. A value of -2 indicates that a
traffic conditioner is invoked and more information
may be available in a traffic conditioner MIB module.
A value between 0 and 63 inclusive indicates that the
bit field is set to the indicated value.
"
::= { hh3cTunnelIfEntry 6 }
hh3cTunnelIfFlowLabel OBJECT-TYPE
SYNTAX IPv6FlowLabelOrAny
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The method used to set the IPv6 Flow Label value.
This object need not be present in rows where
hh3cTunnelIfAddressType indicates the tunnel is not over
IPv6. A value of -1 indicates that a traffic
conditioner is invoked and more information may be
available in a traffic conditioner MIB. Any other
value indicates that the Flow Label field is set to
the indicated value.
"
::= { hh3cTunnelIfEntry 7 }
hh3cTunnelIfAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of address in the corresponding
hh3cTunnelIfLocalInetAddress and hh3cTunnelIfRemoteInetAddress
objects.
"
::= { hh3cTunnelIfEntry 8 }
hh3cTunnelIfLocalInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). If the address is unknown, the value is
0.0.0.0 for IPv4 or :: for IPv6. The type of this
object is given by hh3cTunnelIfAddressType.
"
::= { hh3cTunnelIfEntry 9 }
hh3cTunnelIfRemoteInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header). If the address is unknown or the tunnel is
not a point-to-point link (e.g., if it is a 6to4
tunnel), the value is 0.0.0.0 for tunnels over IPv4 or
:: for tunnels over IPv6. The type of this object is
given by hh3cTunnelIfAddressType.
"
::= { hh3cTunnelIfEntry 10 }
hh3cTunnelIfEncapsLimit OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of additional encapsulations
permitted for packets undergoing encapsulation at this
node. A value of -1 indicates that no limit is
present (except as a result of the packet size).
"
REFERENCE
"RFC 2473, section 4.1.1
"
::= { hh3cTunnelIfEntry 11 }
hh3cTunnelInetConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cTunnelInetConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing information on
configured tunnels. This table can be used to map a
set of tunnel endpoints to the associated ifIndex
value. It can also be used for row creation. Note
that every row in the hh3cTunnelIfTable with a fixed
destination address should have a corresponding row in
the hh3cTunnelInetConfigTable, regardless of whether it
was created via SNMP.
"
::= { hh3cTunnelTables 3 }
hh3cTunnelInetConfigEntry OBJECT-TYPE
SYNTAX Hh3cTunnelInetConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the information
on a particular configured tunnel.
"
INDEX {
hh3cTunnelInetConfigSlot,
hh3cTunnelInetConfigSubSlot,
hh3cTunnelInetConfigTunnNum
}
::= { hh3cTunnelInetConfigTable 1 }
Hh3cTunnelInetConfigEntry ::= SEQUENCE {
hh3cTunnelInetConfigSlot Integer32,
hh3cTunnelInetConfigSubSlot Integer32,
hh3cTunnelInetConfigTunnNum Integer32,
hh3cTunnelInetConfigIfIndex InterfaceIndexOrZero,
hh3cTunnelInetConfigStatus RowStatus
}
hh3cTunnelInetConfigSlot OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Slot number. hh3cTunnelInetConfigSlot, hh3cTunnelInetConfigSubSlot
and hh3cTunnelInetConfigTunnNum describe a tunnel interface.
For Example, interface tunnel 0/0/25 would be configured as:
hh3cTunnelInetConfigSlot 0
hh3cTunnelInetConfigSubSlot 0
hh3cTunnelInetConfigTunnNum 25
"
::= { hh3cTunnelInetConfigEntry 1 }
hh3cTunnelInetConfigSubSlot OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Sub slot number. As described in hh3cTunnelInetConfigSlot's description.
"
::= { hh3cTunnelInetConfigEntry 2 }
hh3cTunnelInetConfigTunnNum OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Tunnel number. As described in hh3cTunnelInetConfigSlot's description.
"
::= { hh3cTunnelInetConfigEntry 3 }
hh3cTunnelInetConfigIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of hh3cTunnelInetConfigStatus for this row
is active, then this object contains the value of
ifIndex corresponding to the tunnel interface. A
value of 0 is not legal in the active state, and means
that the interface index has not yet been assigned.
"
::= { hh3cTunnelInetConfigEntry 6 }
hh3cTunnelInetConfigStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table. The
agent need not support setting this object to
createAndWait or notInService since there are no other
writable objects in this table, and writable objects
in rows of corresponding tables such as the
hh3cTunnelIfTable may be modified while this row is
active.
To create a row in this table, the management
station should set hh3cTunnelInetConfigSlot,
hh3cTunnelInetConfigSubSlot, hh3cTunnelInetConfigTunnNum,
and set hh3cTunnelInetConfigStatus to createAndGo.
Creating a row in this table will cause an interface
index to be assigned by the agent in an
implementation-dependent manner, and corresponding
rows will be instantiated in the ifTable and the
hh3cTunnelIfTable. The status of this row will become
active as soon as the agent assigns the interface
index, regardless of whether the interface is
operationally up.
Deleting a row in this table will likewise delete the
corresponding row in the ifTable and in the hh3cTunnelIfTable.
"
::= { hh3cTunnelInetConfigEntry 7 }
hh3cTunnelEviTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cTunnelEviEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing information on configured EVI-Tunnel.
"
::= { hh3cTunnelTables 4 }
hh3cTunnelEviEntry OBJECT-TYPE
SYNTAX Hh3cTunnelEviEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the information on a
particular configured EVI-Tunnel.
"
INDEX { hh3cTunnelEviTunnNum }
::= { hh3cTunnelEviTable 1 }
Hh3cTunnelEviEntry ::= SEQUENCE {
hh3cTunnelEviTunnNum Integer32,
hh3cTunnelEviIfIndex InterfaceIndex,
hh3cTunnelEviStatus RowStatus,
hh3cTunnelEviAddressType InetAddressType,
hh3cTunnelEviLocalAddr InetAddress,
hh3cTunnelEviNetworkID Integer32,
hh3cTunnelEviKeepaliveInterval Integer32,
hh3cTunnelEviKeepaliveTimes Integer32
}
hh3cTunnelEviTunnNum OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Tunnel number. An identifier used to distinguish
between multiple tunnels.
"
::= { hh3cTunnelEviEntry 1 }
hh3cTunnelEviIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initialization of the entity's network
management system to the next re-initialization.
"
::= { hh3cTunnelEviEntry 2 }
hh3cTunnelEviStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table. The
agent need not support setting this object to
createAndWait or notInService since there are no other
writable objects in this table, and writable objects
in rows of corresponding tables such as the
hh3cTunnelEviTable may be modified while this row is
active.
Creating a row in this table will cause an interface
index to be assigned by the agent in an
implementation-dependent manner, and corresponding
rows will be instantiated in the ifTable.
The status of this row will become
active as soon as the agent assigns the interface
index, regardless of whether the interface is
operationally up.
Deleting a row in this table will likewise delete the
corresponding row in the ifTable.
"
::= { hh3cTunnelEviEntry 3 }
hh3cTunnelEviAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of address in the corresponding
hh3cTunnelEviLocalAddr objects.
Can not be modified after creation.
"
::= { hh3cTunnelEviEntry 4 }
hh3cTunnelEviLocalAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). The type of this object is given by
hh3cTunnelEviAddressType.
"
::= { hh3cTunnelEviEntry 5 }
hh3cTunnelEviNetworkID OBJECT-TYPE
SYNTAX Integer32 (0..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The method used to assign a network ID to an EVI-Tunnel interface.
Assign the same network ID to the EVI-Tunnel interfaces of
all edge devices in an EVI network. A value of 0 indicates that
no network ID is assigned to any EVI-Tunnel interface.
"
::= { hh3cTunnelEviEntry 6 }
hh3cTunnelEviKeepaliveInterval OBJECT-TYPE
SYNTAX Integer32 (1..32767)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The method used to assign the keepalive interval.
"
::= { hh3cTunnelEviEntry 7 }
hh3cTunnelEviKeepaliveTimes OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The method used to assign the keepalive maximum number
of consecutive keepalive failures that are allowed.
"
::= { hh3cTunnelEviEntry 8 }
hh3cTunnelEviLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cTunnelEviLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing information on configured EVI-Link.
"
::= { hh3cTunnelTables 5 }
hh3cTunnelEviLinkEntry OBJECT-TYPE
SYNTAX Hh3cTunnelEviLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the information on a
particular configured EVI-Link.
"
INDEX { hh3cTunnelEviTunnNum, hh3cTunnelEviLinkNum }
::= { hh3cTunnelEviLinkTable 1 }
Hh3cTunnelEviLinkEntry ::= SEQUENCE {
hh3cTunnelEviLinkNum Integer32,
hh3cTunnelEviLinkIfIndex InterfaceIndex,
hh3cTunnelEviLinkAddressType InetAddressType,
hh3cTunnelEviLinkRemoteAddr InetAddress
}
hh3cTunnelEviLinkNum OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"EVI-Link number.
"
::= { hh3cTunnelEviLinkEntry 1 }
hh3cTunnelEviLinkIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initialization of the entity's network
management system to the next re-initialization.
"
::= { hh3cTunnelEviLinkEntry 2 }
hh3cTunnelEviLinkAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address in the corresponding
hh3cTunnelEviLinkRemoteAddr objects.
Can not be modified after creation.
"
::= { hh3cTunnelEviLinkEntry 3 }
hh3cTunnelEviLinkRemoteAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header).
"
::= { hh3cTunnelEviLinkEntry 4}
hh3cTunnelGreTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cTunnelGreEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing information on configured Gre-Tunnel.
"
::= { hh3cTunnelTables 6 }
hh3cTunnelGreEntry OBJECT-TYPE
SYNTAX Hh3cTunnelGreEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the information on a
particular configured Gre-Tunnel.
"
INDEX { hh3cTunnelGreTunnNum }
::= { hh3cTunnelGreTable 1 }
Hh3cTunnelGreEntry ::= SEQUENCE {
hh3cTunnelGreTunnNum Integer32,
hh3cTunnelGreTunnIfIndex InterfaceIndex,
hh3cTunnelGreAddressType InetAddressType,
hh3cTunnelGreLocalAddr InetAddress,
hh3cTunnelGreRemoteAddr InetAddress,
hh3cTunnelGreKeepaliveEnabled TruthValue,
hh3cTunnelGreKeepaliveInterval Integer32,
hh3cTunnelGreKeepaliveTimes Integer32,
hh3cTunnelGreSlbgGroupNum Unsigned32,
hh3cTunnelGreTunnStatus RowStatus
}
hh3cTunnelGreTunnNum OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Tunnel number. An identifier used to distinguish
between multiple tunnels.
"
::= { hh3cTunnelGreEntry 1 }
hh3cTunnelGreTunnIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initialization of the entity's network
management system to the next re-initialization.
"
::= { hh3cTunnelGreEntry 2 }
hh3cTunnelGreAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of address in the corresponding
hh3cTunnelGreLocalAddr and hh3cTunnelGreRemoteAddr objects.
"
::= { hh3cTunnelGreEntry 3 }
hh3cTunnelGreLocalAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header).
"
::= { hh3cTunnelGreEntry 4 }
hh3cTunnelGreRemoteAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header).
"
::= { hh3cTunnelGreEntry 5 }
hh3cTunnelGreKeepaliveEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This MIB object specifies whether or not keepalive is used.
A value of true indicates that keepalive SHOULD be used.
When keepalive is not be used, the value of
hh3cTunnelGreKeepaliveInterval and hh3cTunnelGreKeepaliveTimes
MUST be zero.
"
DEFVAL { false }
::= { hh3cTunnelGreEntry 6 }
hh3cTunnelGreKeepaliveInterval OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The method used to assign the keepalive interval.
The value is zero when keepalive is not used.
The valid value is from 1 to 32767, when keepalive is used.
"
DEFVAL { 0 }
::= { hh3cTunnelGreEntry 7 }
hh3cTunnelGreKeepaliveTimes OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The method used to assign the keepalive maximum number
of consecutive keepalive failures that are allowed.
The value is zero when keepalive is not used.
The valid value is from 1 to 255, when keepalive is used.
"
DEFVAL { 0 }
::= { hh3cTunnelGreEntry 8 }
hh3cTunnelGreSlbgGroupNum OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The method used to assign the service-loopback-group.
"
::= { hh3cTunnelGreEntry 9 }
hh3cTunnelGreTunnStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table. The
agent need not support setting this object to
createAndWait or notInService since there are no other
writable objects in this table, and writable objects
in rows of corresponding tables such as the
hh3cTunnelGreTable may be modified while this row is
active.
Creating a row in this table will cause an interface
index to be assigned by the agent in an
implementation-dependent manner, and corresponding
rows will be instantiated in the ifTable.
The status of this row will become
active as soon as the agent assigns the interface
index, regardless of whether the interface is
operationally up.
Deleting a row in this table will likewise delete the
corresponding row in the ifTable.
"
::= { hh3cTunnelGreEntry 10 }
hh3cTunnelVxlanIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cTunnelVxlanIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing information on configured Vxlan-Tunnel.
"
::= { hh3cTunnelTables 7 }
hh3cTunnelVxlanIfEntry OBJECT-TYPE
SYNTAX Hh3cTunnelVxlanIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the information on a
particular configured Vxlan-Tunnel.
"
INDEX { hh3cTunnelVxlanIfTunnNum }
::= { hh3cTunnelVxlanIfTable 1 }
Hh3cTunnelVxlanIfEntry ::= SEQUENCE {
hh3cTunnelVxlanIfTunnNum Integer32,
hh3cTunnelVxlanTunnIfIndex InterfaceIndex,
hh3cTunnelVxlanIfAddressType InetAddressType,
hh3cTunnelVxlanIfLocalAddr InetAddress,
hh3cTunnelVxlanIfRemoteAddr InetAddress,
hh3cTunnelVxlanIfStatus RowStatus
}
hh3cTunnelVxlanIfTunnNum OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Tunnel number. An identifier used to distinguish
between multiple tunnels.
"
::= { hh3cTunnelVxlanIfEntry 1 }
hh3cTunnelVxlanTunnIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initialization of the entity's network
management system to the next re-initialization.
"
::= { hh3cTunnelVxlanIfEntry 2 }
hh3cTunnelVxlanIfAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of address in the corresponding
hh3cTunnelVxlanIfLocalAddr and hh3cTunnelVxlanIfRemoteAddr objects.
"
::= { hh3cTunnelVxlanIfEntry 3 }
hh3cTunnelVxlanIfLocalAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header).
"
::= { hh3cTunnelVxlanIfEntry 4 }
hh3cTunnelVxlanIfRemoteAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header).
"
::= { hh3cTunnelVxlanIfEntry 5 }
hh3cTunnelVxlanIfStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table. The
agent need not support setting this object to
createAndWait or notInService since there are no other
writable objects in this table, and writable objects
in rows of corresponding tables such as the
hh3cTunnelVxlanIfTable may be modified while this row is
active.
Creating a row in this table will cause an interface
index to be assigned by the agent in an
implementation-dependent manner, and corresponding
rows will be instantiated in the ifTable.
The status of this row will become
active as soon as the agent assigns the interface
index, regardless of whether the interface is
operationally up.
Deleting a row in this table will likewise delete the
corresponding row in the ifTable.
"
::= { hh3cTunnelVxlanIfEntry 6 }
hh3cTunnelVxlanConfigGroup OBJECT IDENTIFIER ::= { hh3cTunnelTables 8 }
hh3cTunnelVxlanUdpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP port number for Vxlan Tunnels."
::= { hh3cTunnelVxlanConfigGroup 1 }
hh3cTunnelVxlanDropWrongCksmPkt OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether or not dropping invalid UDP chesksum Vxlan packet."
::= { hh3cTunnelVxlanConfigGroup 2 }
hh3cTunnelVxlanDropVlanTagPkt OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether or not dropping Vxlan packet with inner VLAN tag."
::= { hh3cTunnelVxlanConfigGroup 3 }
hh3cTunnelAvailableIDGroup OBJECT IDENTIFIER ::= { hh3cTunnelTables 9 }
hh3cTunnelAvailableID OBJECT-TYPE
SYNTAX Integer32 (-1 | 1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The available tunnel ID. A value of -1 indicates that
there is no available tunnel ID."
::= { hh3cTunnelAvailableIDGroup 1 }
hh3cTunnelTotalNumTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cTunnelTotalNumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Total number of a particular method tunnel."
::= { hh3cTunnelTables 10 }
hh3cTunnelTotalNumEntry OBJECT-TYPE
SYNTAX Hh3cTunnelTotalNumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Total number of a particular method tunnel."
INDEX { hh3cTunnelEncapsMethod }
::= { hh3cTunnelTotalNumTable 1 }
Hh3cTunnelTotalNumEntry ::= SEQUENCE {
hh3cTunnelEncapsMethod Hh3cTunnelType,
hh3cTunnelTotalNum Unsigned32
}
hh3cTunnelEncapsMethod OBJECT-TYPE
SYNTAX Hh3cTunnelType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The encapsulation method used by the tunnel."
::= { hh3cTunnelTotalNumEntry 1 }
hh3cTunnelTotalNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of a particular method tunnel.
"
::= { hh3cTunnelTotalNumEntry 2 }
hh3cTunnelNvgreIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cTunnelNvgreIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing information on configured Nvgre-Tunnel.
"
::= { hh3cTunnelTables 11 }
hh3cTunnelNvgreIfEntry OBJECT-TYPE
SYNTAX Hh3cTunnelNvgreIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the information on a
particular configured Nvgre-Tunnel.
"
INDEX { hh3cTunnelNvgreIfTunnNum }
::= { hh3cTunnelNvgreIfTable 1 }
Hh3cTunnelNvgreIfEntry ::= SEQUENCE {
hh3cTunnelNvgreIfTunnNum Integer32,
hh3cTunnelNvgreTunnIfIndex InterfaceIndex,
hh3cTunnelNvgreIfAddressType InetAddressType,
hh3cTunnelNvgreIfLocalAddr InetAddress,
hh3cTunnelNvgreIfRemoteAddr InetAddress,
hh3cTunnelNvgreIfStatus RowStatus
}
hh3cTunnelNvgreIfTunnNum OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Tunnel number. An identifier used to distinguish
between multiple tunnels.
"
::= { hh3cTunnelNvgreIfEntry 1 }
hh3cTunnelNvgreTunnIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initialization of the entity's network
management system to the next re-initialization.
"
::= { hh3cTunnelNvgreIfEntry 2 }
hh3cTunnelNvgreIfAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of address in the corresponding
hh3cTunnelNvgreIfLocalAddr and hh3cTunnelNvgreIfRemoteAddr objects.
"
::= { hh3cTunnelNvgreIfEntry 3 }
hh3cTunnelNvgreIfLocalAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header).
"
::= { hh3cTunnelNvgreIfEntry 4 }
hh3cTunnelNvgreIfRemoteAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header).
"
::= { hh3cTunnelNvgreIfEntry 5 }
hh3cTunnelNvgreIfStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table. The
agent need not support setting this object to
createAndWait or notInService since there are no other
writable objects in this table, and writable objects
in rows of corresponding tables such as the
hh3cTunnelNvgreIfTable may be modified while this row is
active.
Creating a row in this table will cause an interface
index to be assigned by the agent in an
implementation-dependent manner, and corresponding
rows will be instantiated in the ifTable.
The status of this row will become
active as soon as the agent assigns the interface
index, regardless of whether the interface is
operationally up.
Deleting a row in this table will likewise delete the
corresponding row in the ifTable.
"
::= { hh3cTunnelNvgreIfEntry 6 }
hh3cTunnelDestinationTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cTunnelDestinationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing information on tunnels.
"
::= { hh3cTunnelTables 12 }
hh3cTunnelDestinationEntry OBJECT-TYPE
SYNTAX Hh3cTunnelDestinationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the information on a
particular tunnel.
"
INDEX { hh3cTunnelDestinationDstAddr,
hh3cTunnelDestinationDstType,
hh3cTunnelDestinationTunNum}
::= { hh3cTunnelDestinationTable 1 }
Hh3cTunnelDestinationEntry ::= SEQUENCE {
hh3cTunnelDestinationDstAddr InetAddress,
hh3cTunnelDestinationDstType InetAddressType,
hh3cTunnelDestinationTunNum Integer32,
hh3cTunnelDestinationTunIfindex InterfaceIndex
}
hh3cTunnelDestinationDstAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Destination address of a tunnel.
"
::= { hh3cTunnelDestinationEntry 1 }
hh3cTunnelDestinationDstType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of the destination address.
"
::= { hh3cTunnelDestinationEntry 2 }
hh3cTunnelDestinationTunNum OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Tunnel number, an identifier used to distinguish
between multiple tunnels.
"
::= { hh3cTunnelDestinationEntry 3 }
hh3cTunnelDestinationTunIfindex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value greater than zero, for each interface.
"
::= { hh3cTunnelDestinationEntry 4 }
hh3cTunnelGrep2mpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cTunnelGrep2mpStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains GRE P2MP tunnel mapping statistics."
::= { hh3cTunnelTables 13 }
hh3cTunnelGrep2mpStatsEntry OBJECT-TYPE
SYNTAX Hh3cTunnelGrep2mpStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"GRE P2MP tunnel mapping statistics entry."
INDEX { hh3cTunnelGrep2mpStatsTunnelNo,
hh3cTunnelGrep2mpStatsVrf,
hh3cTunnelGrep2mpStatsVPCID,
hh3cTunnelGrep2mpStatsBraAddr,
hh3cTunnelGrep2mpStatsBraMask,
hh3cTunnelGrep2mpStatsAddrType,
hh3cTunnelGrep2mpStatsDestAddr}
::= { hh3cTunnelGrep2mpStatsTable 1 }
Hh3cTunnelGrep2mpStatsEntry ::= SEQUENCE {
hh3cTunnelGrep2mpStatsTunnelNo Integer32,
hh3cTunnelGrep2mpStatsVrf Integer32,
hh3cTunnelGrep2mpStatsVPCID Integer32,
hh3cTunnelGrep2mpStatsBraAddr InetAddress,
hh3cTunnelGrep2mpStatsBraMask InetAddress,
hh3cTunnelGrep2mpStatsAddrType InetAddressType,
hh3cTunnelGrep2mpStatsDestAddr InetAddressIPv4,
hh3cTunnelGrep2mpStatsInPkts Counter64,
hh3cTunnelGrep2mpStatsInOctets Counter64,
hh3cTunnelGrep2mpStatsInDis Counter64,
hh3cTunnelGrep2mpStatsOutPkts Counter64,
hh3cTunnelGrep2mpStatsOutOctets Counter64,
hh3cTunnelGrep2mpStatsOutDis Counter64
}
hh3cTunnelGrep2mpStatsTunnelNo OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Tunnel interfacenumber."
::= { hh3cTunnelGrep2mpStatsEntry 1 }
hh3cTunnelGrep2mpStatsVrf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VPN instance index."
::= { hh3cTunnelGrep2mpStatsEntry 2 }
hh3cTunnelGrep2mpStatsVPCID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VPC ID."
::= { hh3cTunnelGrep2mpStatsEntry 3 }
hh3cTunnelGrep2mpStatsBraAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Branch network IP address."
::= { hh3cTunnelGrep2mpStatsEntry 4 }
hh3cTunnelGrep2mpStatsBraMask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Branch network mask."
::= { hh3cTunnelGrep2mpStatsEntry 5 }
hh3cTunnelGrep2mpStatsAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of address in the corresponding
hh3cTunnelGrep2mpStatsBraAddr and hh3cTunnelGrep2mpStatsBraMask
objects.
"
::= { hh3cTunnelGrep2mpStatsEntry 6 }
hh3cTunnelGrep2mpStatsDestAddr OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Tunnel destination address."
::= { hh3cTunnelGrep2mpStatsEntry 7 }
hh3cTunnelGrep2mpStatsInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of IP datagrams received."
::= { hh3cTunnelGrep2mpStatsEntry 8 }
hh3cTunnelGrep2mpStatsInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of octets received in IP datagrams."
::= { hh3cTunnelGrep2mpStatsEntry 9 }
hh3cTunnelGrep2mpStatsInDis OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of input IP datagrams for which no problems were
encountered to prevent their continued processing, but
were discarded."
::= { hh3cTunnelGrep2mpStatsEntry 10 }
hh3cTunnelGrep2mpStatsOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number IP datagrams sent."
::= { hh3cTunnelGrep2mpStatsEntry 11 }
hh3cTunnelGrep2mpStatsOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of octets in IP datagrams sent."
::= { hh3cTunnelGrep2mpStatsEntry 12 }
hh3cTunnelGrep2mpStatsOutDis OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of output IP datagrams which no problem was
encountered to prevent their transmission to their
destination, but were discarded ."
::= { hh3cTunnelGrep2mpStatsEntry 13 }
END