319 lines
13 KiB
Plaintext
319 lines
13 KiB
Plaintext
-- *****************************************************************
|
|
-- DLINKSW-CABLE-DIAG-MIB.mib : Cable Diagnostic MIB
|
|
--
|
|
-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
|
|
--
|
|
-- *****************************************************************
|
|
DLINKSW-CABLE-DIAG-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
TEXTUAL-CONVENTION FROM SNMPv2-TC
|
|
MODULE-IDENTITY,OBJECT-TYPE,
|
|
Integer32 FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
ifIndex FROM IF-MIB
|
|
dlinkIndustrialCommon FROM DLINK-ID-REC-MIB;
|
|
|
|
|
|
dlinkSwCableDiagMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201301180000Z"
|
|
ORGANIZATION "D-Link Corp."
|
|
CONTACT-INFO
|
|
" D-Link Corporation
|
|
|
|
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
|
|
Taipei City 114, Taiwan, R.O.C
|
|
Tel: +886-2-66000123
|
|
E-mail: tsd@dlink.com.tw
|
|
"
|
|
DESCRIPTION
|
|
"The MIB module for determining the status of
|
|
the cables attached to the device."
|
|
|
|
REVISION "201301180000Z"
|
|
DESCRIPTION
|
|
" This is the first version of this MIB file.
|
|
"
|
|
::= {dlinkIndustrialCommon 58}
|
|
|
|
DlinkCableDiagStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of a pair of the cable.
|
|
other(0) - Other status is not specified here. E.g. the
|
|
diagnostics has never been performed, or the previous
|
|
result is cleared.
|
|
ok(1) - The pair or cable has no error.
|
|
open(2) - The cable in the error pair does not have a connection
|
|
at the specified position.
|
|
short(3) - The cable in the error pair has a short problem at the
|
|
specified position.
|
|
openOrShort(4) - The PHY has no capability to distinguish between
|
|
open and short state.
|
|
crosstalk(5)- The cable in the error pair has a crosstalk problem
|
|
at the specified position.
|
|
unKnown(6) - The diagnostics got an unknown status.
|
|
noCable(7) - The port does not have any cable connection to the
|
|
remote partner.
|
|
shutdown(8)- The remote partner is powered off.
|
|
"
|
|
SYNTAX INTEGER {
|
|
other(0),
|
|
ok(1),
|
|
open(2),
|
|
short(3),
|
|
openOrShort(4),
|
|
crosstalk(5),
|
|
unKnown(6),
|
|
noCable(7),
|
|
shutdown(8)
|
|
}
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dCableDiagNotifications OBJECT IDENTIFIER ::= { dlinkSwCableDiagMIB 0 }
|
|
dCableDiagObjects OBJECT IDENTIFIER ::= { dlinkSwCableDiagMIB 1 }
|
|
dCableDiagConformance OBJECT IDENTIFIER ::= { dlinkSwCableDiagMIB 2 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- Notifications
|
|
-- -----------------------------------------------------------------------------
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- Objects
|
|
-- -----------------------------------------------------------------------------
|
|
dCableDiagIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DCableDiagIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table contains a list of information about test on the device's
|
|
interfaces. Note that entries will exist in this table when the
|
|
corresponding interface is capable to run test."
|
|
::= { dCableDiagObjects 1 }
|
|
|
|
dCableDiagIfEntry OBJECT-TYPE
|
|
SYNTAX DCableDiagIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the dCableDiagIfTable, contains the
|
|
testing controls on an interface."
|
|
INDEX { ifIndex }
|
|
::= { dCableDiagIfTable 1 }
|
|
|
|
DCableDiagIfEntry ::= SEQUENCE {
|
|
dCableDiagIfAction INTEGER
|
|
}
|
|
|
|
dCableDiagIfAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noOp(1),
|
|
test(2),
|
|
clear(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object control the action to be executed on the interface.
|
|
|
|
noOp(1) - No action is taken if this object is set to 'noOp'.
|
|
When read, the value 'noOp' is returned.
|
|
|
|
test(2) - Start the test on the interface.
|
|
|
|
clear(3) - Clear all the test results on the interface.
|
|
The value of the following objects of the entry will
|
|
become 'other'.
|
|
-- dCableDiagResultPair1Status
|
|
-- dCableDiagResultPair2Status
|
|
-- dCableDiagResultPair3Status
|
|
-- dCableDiagResultPair4Status
|
|
The value of the following objects of the entry will
|
|
become -1 (unavailable)
|
|
-- dCableDiagResultPair1Length
|
|
-- dCableDiagResultPair2Length
|
|
-- dCableDiagResultPair3Length
|
|
-- dCableDiagResultPair4Length
|
|
The value of dCableDiagResultStatus of the entry will
|
|
become 'notRun'.
|
|
"
|
|
::= { dCableDiagIfEntry 1 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
dCableDiagResultTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DCableDiagResultEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table contains a list of interface's cable situation.
|
|
Note that entries will exist in this table when the
|
|
corresponding interface is a copper Ethernet port.
|
|
"
|
|
::= { dCableDiagObjects 2 }
|
|
|
|
dCableDiagResultEntry OBJECT-TYPE
|
|
SYNTAX DCableDiagResultEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in dCableDiagResultTable contains cable situation
|
|
of an interface."
|
|
INDEX { ifIndex }
|
|
::= { dCableDiagResultTable 1 }
|
|
|
|
DCableDiagResultEntry ::= SEQUENCE {
|
|
dCableDiagResultPair1Status DlinkCableDiagStatus,
|
|
dCableDiagResultPair2Status DlinkCableDiagStatus,
|
|
dCableDiagResultPair3Status DlinkCableDiagStatus,
|
|
dCableDiagResultPair4Status DlinkCableDiagStatus,
|
|
dCableDiagResultPair1Length Integer32,
|
|
dCableDiagResultPair2Length Integer32,
|
|
dCableDiagResultPair3Length Integer32,
|
|
dCableDiagResultPair4Length Integer32,
|
|
dCableDiagResultStatus INTEGER
|
|
}
|
|
|
|
dCableDiagResultPair1Status OBJECT-TYPE
|
|
SYNTAX DlinkCableDiagStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of pair 1 of the cable."
|
|
::= { dCableDiagResultEntry 1 }
|
|
|
|
dCableDiagResultPair2Status OBJECT-TYPE
|
|
SYNTAX DlinkCableDiagStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of pair 2 of the cable."
|
|
::= { dCableDiagResultEntry 2 }
|
|
|
|
dCableDiagResultPair3Status OBJECT-TYPE
|
|
SYNTAX DlinkCableDiagStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of pair 3 of the cable."
|
|
::= { dCableDiagResultEntry 3 }
|
|
|
|
dCableDiagResultPair4Status OBJECT-TYPE
|
|
SYNTAX DlinkCableDiagStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of pair 4 of the cable."
|
|
::= { dCableDiagResultEntry 4 }
|
|
|
|
dCableDiagResultPair1Length OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "meters"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the approximate length or length to the failure of
|
|
pair 1 of the cable. This value is in meter units.
|
|
The special value of -1 indicates the length is unavailable."
|
|
::= { dCableDiagResultEntry 5 }
|
|
|
|
dCableDiagResultPair2Length OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "meters"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the approximate length or length to the failure of
|
|
pair 2 of the cable. This value is in meter units.
|
|
The special value of -1 indicates the length is unavailable."
|
|
::= { dCableDiagResultEntry 6 }
|
|
|
|
dCableDiagResultPair3Length OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "meters"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the approximate length or length to the failure of
|
|
pair 3 of the cable. This value is in meter units.
|
|
The special value of -1 indicates the length is unavailable."
|
|
::= { dCableDiagResultEntry 7 }
|
|
|
|
dCableDiagResultPair4Length OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "meters"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the approximate length or length to the failure of
|
|
pair 4 of the cable. This value is in meter units.
|
|
The special value of -1 indicates the length is unavailable."
|
|
::= { dCableDiagResultEntry 8 }
|
|
|
|
dCableDiagResultStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notRun(0),
|
|
processing(1),
|
|
lastTestOk(2),
|
|
lastTestFailed(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the status of cable diagnostics on the interface.
|
|
|
|
notRun(0) - the cable diagnostics has never been run for this
|
|
interface or the previous result is cleared.
|
|
|
|
processing(1) - the cable diagnostics is currently running on the
|
|
interface.
|
|
|
|
lastTestOk(2) - the last cable diagnostics was performed successfully
|
|
on the interface.
|
|
|
|
lastTestFailed(3) - the last cable diagnostics failed on the interface."
|
|
::= { dCableDiagResultEntry 9 }
|
|
|
|
-- -----------------------------------------------------------------------------
|
|
-- Conformance
|
|
-- -----------------------------------------------------------------------------
|
|
dCableDiagCompliances OBJECT IDENTIFIER ::= { dCableDiagConformance 1 }
|
|
|
|
dCableDiagCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the
|
|
DLINKSW-CABLE-DIAG-MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
dCableDiagBasicGroup
|
|
}
|
|
::= { dCableDiagCompliances 1 }
|
|
|
|
dCableDiagGroups OBJECT IDENTIFIER ::= { dCableDiagCompliances 2 }
|
|
|
|
dCableDiagBasicGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dCableDiagIfAction,
|
|
dCableDiagResultPair1Status,
|
|
dCableDiagResultPair2Status,
|
|
dCableDiagResultPair3Status,
|
|
dCableDiagResultPair4Status,
|
|
dCableDiagResultPair1Length,
|
|
dCableDiagResultPair2Length,
|
|
dCableDiagResultPair3Length,
|
|
dCableDiagResultPair4Length,
|
|
dCableDiagResultStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group contains the collection of objects related to
|
|
configuration and information of fundamental cable diagnostics feature."
|
|
::= { dCableDiagGroups 1 }
|
|
|
|
|
|
|
|
|
|
END
|
|
|