mibs/MIBS/dlink/DLINKSW-IPMCAST-EXT-MIB
2023-12-05 12:25:34 +01:00

1494 lines
57 KiB
Plaintext
Raw Permalink Blame History

-- *****************************************************************
-- DLINKSW-IPMCAST-EXT-MIB: D-Link IP Multicast Extension MIB
--
-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
--
-- *****************************************************************
DLINKSW-IPMCAST-EXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Counter32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
RowStatus, DisplayString, TruthValue
FROM SNMPv2-TC
InetAddressType, InetAddress, InetAddressPrefixLength, InetVersion
FROM INET-ADDRESS-MIB
InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB
VlanId
FROM Q-BRIDGE-MIB
dlinkIndustrialCommon
FROM DLINK-ID-REC-MIB;
dlinkSwIpMcastExtMIB MODULE-IDENTITY
LAST-UPDATED "201408010000Z"
ORGANIZATION "D-Link Corp."
CONTACT-INFO
" D-Link Corporation
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
Taipei City 114, Taiwan, R.O.C
Tel: +886-2-66000123
E-mail: tsd@dlink.com.tw
"
DESCRIPTION
"This MIB module defines objects for managing IP Multicast."
REVISION "201305020000Z"
DESCRIPTION
"Initial revision of this MIB module."
REVISION "201406160000Z"
DESCRIPTION
"Modify 'dIpmcExtStaticMrouteTable ', 'dIpmcExtRpfTable',dIpmcExtGrpOutgoingPortTable
and 'dIpmcExtGrpOutgoingPortTable'.
Modify the description of objects in 'dIpmcExtIgmpIfStatTable', 'dIpmcExtPimIfStatTable',
and 'dIpmcExtDvmrpIfStatTable'."
REVISION "201407180000Z"
DESCRIPTION
"Modify the OID of all rowstatus objects to 99."
REVISION "201408010000Z"
DESCRIPTION
"Remove objects IpmcExtStaticMrouteDistance and dIpmcExtRpfDistance because
we don<6F><6E>t have plan to implement these objects now.
Add the description for setting the value of dIpmcExtStaticMrouteRpfAddr to zero."
::= { dlinkIndustrialCommon 55 }
--
-- Node definitions
--
dIpmcExtNotifications OBJECT IDENTIFIER ::= { dlinkSwIpMcastExtMIB 0 }
dIpmcExtObjects OBJECT IDENTIFIER ::= { dlinkSwIpMcastExtMIB 1 }
dIpmcExtConformance OBJECT IDENTIFIER ::= { dlinkSwIpMcastExtMIB 2 }
-- -----------------------------------------------------------------------------
dIpmcExtMcastRouteEnabled OBJECT-TYPE
SYNTAX BITS {
ipv4(0),
ipv6(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the specific multicast routing is
enabled. This is the enhancement of the ipMcastEnabled in IPMCAST-MIB.
If ipv4(0) bit is set to 1, then IPv4 multicast routing is enabled;
If ipv6(1) bit is set to 1, then IPv6 multicast routing is enabled.
"
::= { dIpmcExtObjects 1 }
dIpmcExtIpv4McastTableLookupMode OBJECT-TYPE
SYNTAX INTEGER {
ip(1),
mac(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the lookup mode of IPv4 multicast forwarding table.
'ip' - forwarding IP multicast packets based on IP.
'mac' - forwarding IP multicast packets based on MAC.
"
::= { dIpmcExtObjects 2 }
-- -----------------------------------------------------------------------------
dIpmcExtClearStatisticsObjects OBJECT IDENTIFIER ::= { dIpmcExtObjects 3 }
dIpmcExtClearStatistics OBJECT-TYPE
SYNTAX BITS {
igmp(0),
pim(1),
dvmrp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to clear the multicast protocol packet statistics
when set to the corresponding bit to '1'.
When read, '00'H (no enumerated values are set) is returned."
::= { dIpmcExtClearStatisticsObjects 1 }
-- -----------------------------------------------------------------------------
dIpmcExtBoundaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF DIpmcExtBoundaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains a list of interface-specific configuration about
access lists to avoid leaking of the limited scoped multicast traffic
in private domain across the domain boundary interfaces."
::= { dIpmcExtObjects 4 }
dIpmcExtBoundaryEntry OBJECT-TYPE
SYNTAX DIpmcExtBoundaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry is used to avoid leaking of the limited scoped multicast
traffic in private domain across the domain boundary interfaces."
INDEX {
dIpmcExtBoundaryVersion,
dIpmcExtBoundaryIfIdx,
dIpmcExtBoundaryAccessList,
dIpmcExtBoundaryApplyDirection
}
::= { dIpmcExtBoundaryTable 1 }
DIpmcExtBoundaryEntry ::= SEQUENCE {
dIpmcExtBoundaryVersion InetVersion,
dIpmcExtBoundaryIfIdx InterfaceIndex,
dIpmcExtBoundaryAccessList DisplayString,
dIpmcExtBoundaryApplyDirection INTEGER,
dIpmcExtBoundaryRowStatus RowStatus
}
dIpmcExtBoundaryVersion OBJECT-TYPE
SYNTAX InetVersion
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the IP protocol version of the entry.
"
::= { dIpmcExtBoundaryEntry 1 }
dIpmcExtBoundaryIfIdx OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the ifIndex of the entry.
Only VLAN interface is valid.
"
::= { dIpmcExtBoundaryEntry 2 }
dIpmcExtBoundaryAccessList OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the name of a standard IP access list which
includes a list of permit or denied (*,G) or (S,G) entries."
::= { dIpmcExtBoundaryEntry 3 }
dIpmcExtBoundaryApplyDirection OBJECT-TYPE
SYNTAX INTEGER{
inbound(1),
outbound(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The filtering setting for inbound direction filters the multicast
user traffic arriving at the interface based on the specified
access list.
The filtering setting for outbound direction filters the PIM join
message or IGMP join message arrive at the interface based on the
specified access list."
::= { dIpmcExtBoundaryEntry 4 }
dIpmcExtBoundaryRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to installation
and removal conventions for conceptual rows."
::= { dIpmcExtBoundaryEntry 99 }
-- -----------------------------------------------------------------------------
dIpmcExtStaticMrouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF DIpmcExtStaticMrouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table consists of a list of static multicast routes."
::= { dIpmcExtObjects 5 }
dIpmcExtStaticMrouteEntry OBJECT-TYPE
SYNTAX DIpmcExtStaticMrouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry is used to configure a static multicast route."
INDEX {
dIpmcExtStaticMrouteSrcNetType,
dIpmcExtStaticMrouteSrcNetAddr,
dIpmcExtStaticMrouteSrcNetPreLen
}
::= { dIpmcExtStaticMrouteTable 1 }
DIpmcExtStaticMrouteEntry ::= SEQUENCE {
dIpmcExtStaticMrouteSrcNetType InetAddressType,
dIpmcExtStaticMrouteSrcNetAddr InetAddress,
dIpmcExtStaticMrouteSrcNetPreLen InetAddressPrefixLength,
dIpmcExtStaticMrouteRpfType INTEGER,
dIpmcExtStaticMrouteRpfAddr InetAddress,
dIpmcExtStaticMrouteRpfIfIndex InterfaceIndexOrZero,
dIpmcExtStaticMrouteRowStatus RowStatus
}
dIpmcExtStaticMrouteSrcNetType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the address type of the multicast source
network."
::= { dIpmcExtStaticMrouteEntry 1 }
dIpmcExtStaticMrouteSrcNetAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the address of the multicast source network."
::= { dIpmcExtStaticMrouteEntry 2 }
dIpmcExtStaticMrouteSrcNetPreLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the prefix length of the multicast source
network."
::= { dIpmcExtStaticMrouteEntry 3 }
dIpmcExtStaticMrouteRpfType OBJECT-TYPE
SYNTAX INTEGER {
neighborAddr(1),
interfaceId(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the type of the RPF (Reverse Path Forwarding).
neighborAddr - The RPF address for the route, a lookup in the
routing table will be done to resolve the RPF
interface.
interfaceId - The interface which the reverse path forwarding to reach the
network.
"
::= { dIpmcExtStaticMrouteEntry 4 }
dIpmcExtStaticMrouteRpfAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the address of the RPF neighbor router.
This object is meaningful when dIpmcExtStaticMrouteRpfType is
'neighborAddr'.
If the value of this obejct is set to zero, it indicates that
RPF check will be always failed for multicast traffic sent from
the source network specified by this static multicast route.
The InetAddressType, e.g., IPv4 or IPv6, is identified by the
dIpmcExtStaticMrouteSrcNetType variable in the dIpmcExtStaticMrouteTable
table.
"
::= { dIpmcExtStaticMrouteEntry 5 }
dIpmcExtStaticMrouteRpfIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the ifIndex of the interface where the RPF
neighbor IP address is located. When set this object to ifIndex of
null0, the RPF check result will always fail.
This object is meaningful when dIpmcExtStaticMrouteRpfType is
'interfaceId'.
"
::= { dIpmcExtStaticMrouteEntry 6 }
dIpmcExtStaticMrouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row, by which rows in this table can
be created and destroyed.
"
::= { dIpmcExtStaticMrouteEntry 99 }
-- -----------------------------------------------------------------------------
dIpmcExtCtrlPktCpuFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF DIpmcExtCtrlPktCpuFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table consists of a list of information to filter layer 3 control
packets. An entry appears in this table for each interface on which
the filtering is configurable."
::= { dIpmcExtObjects 6 }
dIpmcExtCtrlPktCpuFilterEntry OBJECT-TYPE
SYNTAX DIpmcExtCtrlPktCpuFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry identifies the layer 3 control packets filtering on a capable
interface."
INDEX { dIpmcExtCtrlPktCpuFilterIfIdx }
::= { dIpmcExtCtrlPktCpuFilterTable 1 }
DIpmcExtCtrlPktCpuFilterEntry ::= SEQUENCE {
dIpmcExtCtrlPktCpuFilterIfIdx InterfaceIndex,
dIpmcExtCtrlPktCpuFilterV4Proto BITS,
dIpmcExtCtrlPktCpuFilterV6Proto BITS
}
dIpmcExtCtrlPktCpuFilterIfIdx OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value that uniquely identifies the interface to which
this entry is applicable."
::= { dIpmcExtCtrlPktCpuFilterEntry 1 }
dIpmcExtCtrlPktCpuFilterV4Proto OBJECT-TYPE
SYNTAX BITS {
dvmrp(0),
pim(1),
igmpQuery(2),
ospf(3),
rip(4),
vrrp(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the IPv4 layer 3 control packets is
filtered then not sent to the corresponding protocol stack. When
the bit is '1', the corresponding IPv4 layer 3 control packets will
be filtered.
"
::= { dIpmcExtCtrlPktCpuFilterEntry 2 }
dIpmcExtCtrlPktCpuFilterV6Proto OBJECT-TYPE
SYNTAX BITS {
pim(0),
mldQuery(1),
ospf(2),
ripng(3),
nd(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the IPv6 layer 3 control packets is
filtered then not sent to the corresponding protocol stack. When
the bit is '1', the corresponding IPv6 layer 3 control packets will
be filtered.
"
::= { dIpmcExtCtrlPktCpuFilterEntry 3 }
-- -----------------------------------------------------------------------------
dIpmcExtCtrlPktReplacePriTable OBJECT-TYPE
SYNTAX SEQUENCE OF DIpmcExtCtrlPktReplacePriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table consists of a list of Priority and DSCP values
of control packets which are forwarded by software."
::= { dIpmcExtObjects 7 }
dIpmcExtCtrlPktReplacePriEntry OBJECT-TYPE
SYNTAX DIpmcExtCtrlPktReplacePriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consists of the Priority and DSCP values configured for
a protocol."
INDEX { dIpmcExtCtrlPktRepPriPotocol }
::= { dIpmcExtCtrlPktReplacePriTable 1 }
DIpmcExtCtrlPktReplacePriEntry ::= SEQUENCE {
dIpmcExtCtrlPktRepPriPotocol INTEGER,
dIpmcExtCtrlPktRepDscp Integer32,
dIpmcExtCtrlPktRepPriority Integer32,
dIpmcExtCtrlPktRepPriRowStatus RowStatus
}
dIpmcExtCtrlPktRepPriPotocol OBJECT-TYPE
SYNTAX INTEGER {
v4dvmrp(1),
v4pim(2),
igmpQuery(3),
v4ospf(4),
rip(5),
v4vrrp(6),
v6pim(7),
mld(8),
v6ospf(9),
ripng(10),
nd(11)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the protocol type of the entry.
"
::= { dIpmcExtCtrlPktReplacePriEntry 1 }
dIpmcExtCtrlPktRepDscp OBJECT-TYPE
SYNTAX Integer32 ( -1 | 0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the DSCP value to replace the DSCP field of
the protocol control packets.
The value of -1 indicates the replacing DSCP is not enabled.
"
DEFVAL { -1 }
::= { dIpmcExtCtrlPktReplacePriEntry 2 }
dIpmcExtCtrlPktRepPriority OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the Priority value to replace the Priority
field of the protocol control packets.
The value of -1 indicates the replacing Priority is not enabled.
"
::= { dIpmcExtCtrlPktReplacePriEntry 3 }
dIpmcExtCtrlPktRepPriRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to installation
and removal conventions for conceptual rows."
::= { dIpmcExtCtrlPktReplacePriEntry 99 }
-- -----------------------------------------------------------------------------
dIpmcExtRpfTable OBJECT-TYPE
SYNTAX SEQUENCE OF DIpmcExtRpfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table consists of Reverse Path Forwarding (RPF) information."
::= { dIpmcExtObjects 8 }
dIpmcExtRpfEntry OBJECT-TYPE
SYNTAX DIpmcExtRpfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consists of Reverse Path Forwarding (RPF) information."
INDEX {
dIpmcExtRpfAddrType,
dIpmcExtRpfAddr,
dIpmcExtRpfRouteAddr,
dIpmcExtRpfRoutePrefixLen
}
::= { dIpmcExtRpfTable 1 }
DIpmcExtRpfEntry ::= SEQUENCE {
dIpmcExtRpfAddrType InetAddressType,
dIpmcExtRpfAddr InetAddress,
dIpmcExtRpfRouteAddr InetAddress,
dIpmcExtRpfRoutePrefixLen InetAddressPrefixLength,
dIpmcExtRpfIfIndex InterfaceIndexOrZero,
dIpmcExtRpfNeighborAddr InetAddress,
dIpmcExtRpfType INTEGER,
dIpmcExtRpfMetricValid TruthValue,
dIpmcExtRpfMetric Unsigned32
}
dIpmcExtRpfAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the type of the RPF address.
"
::= { dIpmcExtRpfEntry 1 }
dIpmcExtRpfAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the RPF address of the entry.
"
::= { dIpmcExtRpfEntry 2 }
dIpmcExtRpfRouteAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the route that matched
against the source.
The InetAddressType, e.g., IPv4 or IPv6, is identified by the
dIpmcExtRpfAddrType variable in the dIpmcExtRpfTable table.
"
::= { dIpmcExtRpfEntry 3 }
dIpmcExtRpfRoutePrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the prefix length of the route that matched
against the source.
"
::= { dIpmcExtRpfEntry 4}
dIpmcExtRpfIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the ifIndex of the interface where the RPF
neighbor IP address is located.
A value of 0 indicates that this object is not applicable."
::= { dIpmcExtRpfEntry 5 }
dIpmcExtRpfNeighborAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the RPF neighbor address.
The InetAddressType, e.g., IPv4 or IPv6, is identified by the
dIpmcExtRpfAddrType variable in the dIpmcExtRpfTable table.
"
::= { dIpmcExtRpfEntry 6 }
dIpmcExtRpfType OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
static(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the origination of RPF information."
::= { dIpmcExtRpfEntry 7 }
dIpmcExtRpfMetricValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the dIpmcExtRpfMetric of the entry
is applicable."
::= { dIpmcExtRpfEntry 9 }
dIpmcExtRpfMetric OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the unicast routing metric.
"
::= { dIpmcExtRpfEntry 10 }
-- -----------------------------------------------------------------------------
dIpmcExtGrpOutgoingPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF DIpmcExtGrpOutgoingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing information on the outgoing ports for
IP multicast datagrams."
::= { dIpmcExtObjects 9 }
dIpmcExtGrpOutgoingPortEntry OBJECT-TYPE
SYNTAX DIpmcExtGrpOutgoingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains the information about outgoing port
to which IP multicast datagrams from particular sources
to an IP multicast group address.
"
INDEX {
dIpmcExtGrpOutgoingAddrType,
dIpmcExtGrpOutgoingVlanIndex,
dIpmcExtGrpOutgoingGroupAddr,
dIpmcExtGrpOutgoingPfxLen,
dIpmcExtGrpOutgoingSrcAddr,
dIpmcExtGrpOutgoingSrcPfxLen,
dIpmcExtGrpOutgoingPort
}
::= { dIpmcExtGrpOutgoingPortTable 1 }
DIpmcExtGrpOutgoingPortEntry ::= SEQUENCE {
dIpmcExtGrpOutgoingAddrType InetAddressType,
dIpmcExtGrpOutgoingVlanIndex VlanId,
dIpmcExtGrpOutgoingGroupAddr InetAddress,
dIpmcExtGrpOutgoingPfxLen InetAddressPrefixLength,
dIpmcExtGrpOutgoingSrcAddr InetAddress,
dIpmcExtGrpOutgoingSrcPfxLen InetAddressPrefixLength,
dIpmcExtGrpOutgoingPort InterfaceIndex
}
dIpmcExtGrpOutgoingAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A value indicating the address type of the group address
"
::= { dIpmcExtGrpOutgoingPortEntry 1 }
dIpmcExtGrpOutgoingVlanIndex OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This indicates the VLAN ID of the entry."
::= { dIpmcExtGrpOutgoingPortEntry 2 }
dIpmcExtGrpOutgoingGroupAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address of the entry.
"
::= { dIpmcExtGrpOutgoingPortEntry 3 }
dIpmcExtGrpOutgoingPfxLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The length in bits of the multicast group address.
"
::= { dIpmcExtGrpOutgoingPortEntry 4 }
dIpmcExtGrpOutgoingSrcAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A value indicating the source address.
The InetAddressType, e.g., IPv4 or IPv6, is identified by the
dIpmcExtGrpOutgoingAddrType variable in the dIpmcExtGrpOutgoingPortTable table.
"
::= { dIpmcExtGrpOutgoingPortEntry 5 }
dIpmcExtGrpOutgoingSrcPfxLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The length in bits of the source address.
"
::= { dIpmcExtGrpOutgoingPortEntry 6 }
dIpmcExtGrpOutgoingPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex value of the outgpoing port.
"
::= { dIpmcExtGrpOutgoingPortEntry 7 }
-- -----------------------------------------------------------------------------
dIpmcExtStatisticsObjects OBJECT IDENTIFIER ::= { dIpmcExtObjects 10 }
dIpmcExtIgmpPortIfStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF DIpmcExtIgmpPortIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains a list of statistics about IGMP."
::= { dIpmcExtStatisticsObjects 1 }
dIpmcExtIgmpPortIfStatEntry OBJECT-TYPE
SYNTAX DIpmcExtIgmpPortIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dIpmcExtIgmpPortIfStatTable."
INDEX {
dIpmcExtIgmpPortIfIndex
}
::= { dIpmcExtIgmpPortIfStatTable 1 }
DIpmcExtIgmpPortIfStatEntry ::= SEQUENCE {
dIpmcExtIgmpPortIfIndex InterfaceIndex,
dIpmcExtIgmpPortIfV1RxReport Counter32,
dIpmcExtIgmpPortIfV1RxQuery Counter32,
dIpmcExtIgmpPortIfV1TxReport Counter32,
dIpmcExtIgmpPortIfV1TxQuery Counter32,
dIpmcExtIgmpPortIfV2RxReport Counter32,
dIpmcExtIgmpPortIfV2RxQuery Counter32,
dIpmcExtIgmpPortIfV2RxLeave Counter32,
dIpmcExtIgmpPortIfV2TxReport Counter32,
dIpmcExtIgmpPortIfV2TxQuery Counter32,
dIpmcExtIgmpPortIfV2TxLeave Counter32,
dIpmcExtIgmpPortIfV3RxReport Counter32,
dIpmcExtIgmpPortIfV3RxQuery Counter32,
dIpmcExtIgmpPortIfV3TxReport Counter32,
dIpmcExtIgmpPortIfV3TxQuery Counter32,
dIpmcExtIgmpPortIfRxUnknown Counter32,
dIpmcExtIgmpPortIfTxUnknown Counter32
}
dIpmcExtIgmpPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the ifIndex."
::= { dIpmcExtIgmpPortIfStatEntry 1 }
dIpmcExtIgmpPortIfV1RxReport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received IGMP v1 Report."
::= { dIpmcExtIgmpPortIfStatEntry 2 }
dIpmcExtIgmpPortIfV1RxQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received IGMP v1 Query packets."
::= { dIpmcExtIgmpPortIfStatEntry 3 }
dIpmcExtIgmpPortIfV1TxReport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted IGMP v1 Report packets ."
::= { dIpmcExtIgmpPortIfStatEntry 4 }
dIpmcExtIgmpPortIfV1TxQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted IGMP v1 Query packets."
::= { dIpmcExtIgmpPortIfStatEntry 5 }
dIpmcExtIgmpPortIfV2RxReport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received IGMP v2 Report packets."
::= { dIpmcExtIgmpPortIfStatEntry 6 }
dIpmcExtIgmpPortIfV2RxQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received IGMP v2 Query packets."
::= { dIpmcExtIgmpPortIfStatEntry 7 }
dIpmcExtIgmpPortIfV2RxLeave OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received IGMP v2 Leave packets."
::= { dIpmcExtIgmpPortIfStatEntry 8 }
dIpmcExtIgmpPortIfV2TxReport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted IGMP v2 Report packets."
::= { dIpmcExtIgmpPortIfStatEntry 9 }
dIpmcExtIgmpPortIfV2TxQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted IGMP v2 Query packets."
::= { dIpmcExtIgmpPortIfStatEntry 10 }
dIpmcExtIgmpPortIfV2TxLeave OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted IGMP v2 Leave packets."
::= { dIpmcExtIgmpPortIfStatEntry 11 }
dIpmcExtIgmpPortIfV3RxReport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received IGMP v3 Report packets."
::= { dIpmcExtIgmpPortIfStatEntry 12 }
dIpmcExtIgmpPortIfV3RxQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received IGMP v3 Query packets."
::= { dIpmcExtIgmpPortIfStatEntry 13 }
dIpmcExtIgmpPortIfV3TxReport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted IGMP v3 Report packets."
::= { dIpmcExtIgmpPortIfStatEntry 14 }
dIpmcExtIgmpPortIfV3TxQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted IGMP v3 Query packets."
::= { dIpmcExtIgmpPortIfStatEntry 15 }
dIpmcExtIgmpPortIfRxUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received IGMP packets which cannot
be classified into current message type."
::= { dIpmcExtIgmpPortIfStatEntry 16 }
dIpmcExtIgmpPortIfTxUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted IGMP packets which cannot
be classified into current message type."
::= { dIpmcExtIgmpPortIfStatEntry 17 }
-- -----------------------------------------------------------------------------
dIpmcExtPimPortIfStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF DIpmcExtPimPortIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains a list of statistics about PIM."
::= { dIpmcExtStatisticsObjects 2 }
dIpmcExtPimPortIfStatEntry OBJECT-TYPE
SYNTAX DIpmcExtPimPortIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dIpmcExtPimPortIfStatTable."
INDEX {
dIpmcExtPimPortIfIndex,
dIpmcExtPimPortIfVersion
}
::= { dIpmcExtPimPortIfStatTable 1 }
DIpmcExtPimPortIfStatEntry ::= SEQUENCE {
dIpmcExtPimPortIfIndex InterfaceIndex,
dIpmcExtPimPortIfVersion InetVersion,
dIpmcExtPimPortIfRxHello Counter32,
dIpmcExtPimPortIfTxHello Counter32,
dIpmcExtPimPortIfRxRegister Counter32,
dIpmcExtPimPortIfTxRegister Counter32,
dIpmcExtPimPortIfRxRegisterStop Counter32,
dIpmcExtPimPortIfTxRegisterStop Counter32,
dIpmcExtPimPortIfRxJoinPrune Counter32,
dIpmcExtPimPortIfTxJoinPrune Counter32,
dIpmcExtPimPortIfRxBootstrap Counter32,
dIpmcExtPimPortIfTxBootstrap Counter32,
dIpmcExtPimPortIfRxAssert Counter32,
dIpmcExtPimPortIfTxAssert Counter32,
dIpmcExtPimPortIfRxGraft Counter32,
dIpmcExtPimPortIfTxGraft Counter32,
dIpmcExtPimPortIfRxGraftAck Counter32,
dIpmcExtPimPortIfTxGraftAck Counter32,
dIpmcExtPimPortIfRxCRpAdv Counter32,
dIpmcExtPimPortIfTxCRpAdv Counter32,
dIpmcExtPimPortIfRxStateRefresh Counter32,
dIpmcExtPimPortIfTxStateRefresh Counter32,
dIpmcExtPimPortIfRxUnknown Counter32,
dIpmcExtPimPortIfTxUnknown Counter32
}
dIpmcExtPimPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the ifIndex."
::= { dIpmcExtPimPortIfStatEntry 1 }
dIpmcExtPimPortIfVersion OBJECT-TYPE
SYNTAX InetVersion
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the IP protocol version of the entry."
::= { dIpmcExtPimPortIfStatEntry 2 }
dIpmcExtPimPortIfRxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received PIM Hello packets."
::= { dIpmcExtPimPortIfStatEntry 3 }
dIpmcExtPimPortIfTxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted PIM Hello packets."
::= { dIpmcExtPimPortIfStatEntry 4 }
dIpmcExtPimPortIfRxRegister OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received PIM Register packets."
::= { dIpmcExtPimPortIfStatEntry 5 }
dIpmcExtPimPortIfTxRegister OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted PIM Register packets."
::= { dIpmcExtPimPortIfStatEntry 6 }
dIpmcExtPimPortIfRxRegisterStop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received PIM Register-Stop packets."
::= { dIpmcExtPimPortIfStatEntry 7 }
dIpmcExtPimPortIfTxRegisterStop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted PIM Register-Stop packets."
::= { dIpmcExtPimPortIfStatEntry 8 }
dIpmcExtPimPortIfRxJoinPrune OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received PIM Join/Prune packets."
::= { dIpmcExtPimPortIfStatEntry 9 }
dIpmcExtPimPortIfTxJoinPrune OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted PIM Join/Prune packets."
::= { dIpmcExtPimPortIfStatEntry 10 }
dIpmcExtPimPortIfRxBootstrap OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received PIM Bootstrap packets."
::= { dIpmcExtPimPortIfStatEntry 11 }
dIpmcExtPimPortIfTxBootstrap OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted PIM Bootstrap packets."
::= { dIpmcExtPimPortIfStatEntry 12 }
dIpmcExtPimPortIfRxAssert OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received PIM Assert packets."
::= { dIpmcExtPimPortIfStatEntry 13 }
dIpmcExtPimPortIfTxAssert OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted PIM Assert packets."
::= { dIpmcExtPimPortIfStatEntry 14 }
dIpmcExtPimPortIfRxGraft OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received PIM Graft packets."
::= { dIpmcExtPimPortIfStatEntry 15 }
dIpmcExtPimPortIfTxGraft OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted PIM Graft packets."
::= { dIpmcExtPimPortIfStatEntry 16 }
dIpmcExtPimPortIfRxGraftAck OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received PIM Graft-Ack packets."
::= { dIpmcExtPimPortIfStatEntry 17 }
dIpmcExtPimPortIfTxGraftAck OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted PIM Graft-Ack packets."
::= { dIpmcExtPimPortIfStatEntry 18 }
dIpmcExtPimPortIfRxCRpAdv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received PIM Candidate-RP-Advertisement
packets."
::= { dIpmcExtPimPortIfStatEntry 19 }
dIpmcExtPimPortIfTxCRpAdv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted PIM Candidate-RP-Advertisement
packets."
::= { dIpmcExtPimPortIfStatEntry 20 }
dIpmcExtPimPortIfRxStateRefresh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received PIM-DM State Refresh packets."
::= { dIpmcExtPimPortIfStatEntry 21 }
dIpmcExtPimPortIfTxStateRefresh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted PIM-DM State Refresh
packets."
::= { dIpmcExtPimPortIfStatEntry 22 }
dIpmcExtPimPortIfRxUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received PIM packets which cannot
be classified into current message type."
::= { dIpmcExtPimPortIfStatEntry 23 }
dIpmcExtPimPortIfTxUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted IGMP packets which cannot
be classified into current message type."
::= { dIpmcExtPimPortIfStatEntry 24 }
-- -----------------------------------------------------------------------------
dIpmcExtDvmrpPortIfStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF DIpmcExtDvmrpPortIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains a list of statistics about DVMRP."
::= { dIpmcExtStatisticsObjects 3 }
dIpmcExtDvmrpPortIfStatEntry OBJECT-TYPE
SYNTAX DIpmcExtDvmrpPortIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dIpmcExtDvmrpPortIfStatTable."
INDEX {
dIpmcExtDvmrpPortIfIndex
}
::= { dIpmcExtDvmrpPortIfStatTable 1 }
DIpmcExtDvmrpPortIfStatEntry ::= SEQUENCE {
dIpmcExtDvmrpPortIfIndex InterfaceIndex,
dIpmcExtDvmrpPortIfRxProbe Counter32,
dIpmcExtDvmrpPortIfTxProbe Counter32,
dIpmcExtDvmrpPortIfRxReport Counter32,
dIpmcExtDvmrpPortIfTxReport Counter32,
dIpmcExtDvmrpPortIfRxPrune Counter32,
dIpmcExtDvmrpPortIfTxPrune Counter32,
dIpmcExtDvmrpPortIfRxGraft Counter32,
dIpmcExtDvmrpPortIfTxGraft Counter32,
dIpmcExtDvmrpPortIfRxGraftAck Counter32,
dIpmcExtDvmrpPortIfTxGraftAck Counter32,
dIpmcExtDvmrpPortIfRxUnknown Counter32,
dIpmcExtDvmrpPortIfTxUnknown Counter32
}
dIpmcExtDvmrpPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the ifIndex."
::= { dIpmcExtDvmrpPortIfStatEntry 1 }
dIpmcExtDvmrpPortIfRxProbe OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received DVMRP Probe packets."
::= { dIpmcExtDvmrpPortIfStatEntry 2 }
dIpmcExtDvmrpPortIfTxProbe OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted DVMRP Probe packets."
::= { dIpmcExtDvmrpPortIfStatEntry 3 }
dIpmcExtDvmrpPortIfRxReport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received DVMRP Report packets."
::= { dIpmcExtDvmrpPortIfStatEntry 4 }
dIpmcExtDvmrpPortIfTxReport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted DVMRP Report packets."
::= { dIpmcExtDvmrpPortIfStatEntry 5 }
dIpmcExtDvmrpPortIfRxPrune OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received DVMRP Prune packets."
::= { dIpmcExtDvmrpPortIfStatEntry 6 }
dIpmcExtDvmrpPortIfTxPrune OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted DVMRP Prune packets."
::= { dIpmcExtDvmrpPortIfStatEntry 7 }
dIpmcExtDvmrpPortIfRxGraft OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received DVMRP Graft packets."
::= { dIpmcExtDvmrpPortIfStatEntry 8 }
dIpmcExtDvmrpPortIfTxGraft OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted DVMRP Graft packets."
::= { dIpmcExtDvmrpPortIfStatEntry 9 }
dIpmcExtDvmrpPortIfRxGraftAck OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received DVMRP Graft-Ack packets."
::= { dIpmcExtDvmrpPortIfStatEntry 10 }
dIpmcExtDvmrpPortIfTxGraftAck OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted DVMRP Graft-Ack packets."
::= { dIpmcExtDvmrpPortIfStatEntry 11 }
dIpmcExtDvmrpPortIfRxUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of received PIM packets which cannot
be classified into current message type."
::= { dIpmcExtDvmrpPortIfStatEntry 12 }
dIpmcExtDvmrpPortIfTxUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the number of transmitted PIM packets which cannot
be classified into current message type."
::= { dIpmcExtDvmrpPortIfStatEntry 13 }
-- -----------------------------------------------------------------------------
dIpmcExtCompliances OBJECT IDENTIFIER ::= { dIpmcExtConformance 1 }
dIpmcExtCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
DLINKSW-IPMCAST-EXT-MIB."
MODULE
MANDATORY-GROUPS {
dIpmcExtGeneralCtrlGroup,
dIpmcExtBoundaryGroup,
dIpmcExtMrouteGroup,
dIpmcExtRpfGroup
}
OBJECT dIpmcExtIpv4McastTableLookupMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
GROUP dIpmcExtCtrlPktCpuFilterGroup
DESCRIPTION
"This group is optional."
GROUP dIpmcExtCtrlPktReplacePriGroup
DESCRIPTION
"This group is optional."
GROUP dIpmcExtOutgoingPortsInfoGroup
DESCRIPTION
"This group is optional."
GROUP dIpmcExtClearStatisticsGroup
DESCRIPTION
"This group is optional."
GROUP dIpmcExtIgmpStatisticsGroup
DESCRIPTION
"This group is optional."
GROUP dIpmcExtPimStatisticsGroup
DESCRIPTION
"This group is optional."
GROUP dIpmcExtDvmrpStatisticsGroup
DESCRIPTION
"This group is optional."
::= { dIpmcExtCompliances 1 }
dIpmcExtGroups OBJECT IDENTIFIER ::= { dIpmcExtConformance 2 }
dIpmcExtClearStatisticsGroup OBJECT-GROUP
OBJECTS {
dIpmcExtClearStatistics
}
STATUS current
DESCRIPTION
"A collection of objects clears the statistics of multicast protocol
packets."
::= { dIpmcExtGroups 1 }
dIpmcExtGeneralCtrlGroup OBJECT-GROUP
OBJECTS {
dIpmcExtMcastRouteEnabled,
dIpmcExtIpv4McastTableLookupMode
}
STATUS current
DESCRIPTION
"A collection of objects provides the multicast management."
::= { dIpmcExtGroups 2 }
dIpmcExtBoundaryGroup OBJECT-GROUP
OBJECTS {
dIpmcExtBoundaryRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing information for the system's
multicast scope zone boundaries."
::= { dIpmcExtGroups 3 }
dIpmcExtMrouteGroup OBJECT-GROUP
OBJECTS {
dIpmcExtStaticMrouteRpfType,
dIpmcExtStaticMrouteRpfAddr,
dIpmcExtStaticMrouteRpfIfIndex,
dIpmcExtStaticMrouteRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects provides the management of static multicast
routes."
::= { dIpmcExtGroups 4 }
dIpmcExtCtrlPktCpuFilterGroup OBJECT-GROUP
OBJECTS {
dIpmcExtCtrlPktCpuFilterV4Proto,
dIpmcExtCtrlPktCpuFilterV6Proto
}
STATUS current
DESCRIPTION
"A collection of objects providing information about the layer 3
control packets filtering status."
::= { dIpmcExtGroups 5 }
dIpmcExtCtrlPktReplacePriGroup OBJECT-GROUP
OBJECTS {
dIpmcExtCtrlPktRepDscp,
dIpmcExtCtrlPktRepPriority,
dIpmcExtCtrlPktRepPriRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing information about the Priority
and DSCP values configured for specific control protocols."
::= { dIpmcExtGroups 6 }
dIpmcExtRpfGroup OBJECT-GROUP
OBJECTS {
dIpmcExtRpfIfIndex,
dIpmcExtRpfNeighborAddr,
dIpmcExtRpfType,
dIpmcExtRpfMetricValid,
dIpmcExtRpfMetric
}
STATUS current
DESCRIPTION
"A collection of objects provides information about the Reverse
Path Forwarding (RPF) for IP multicast."
::= { dIpmcExtGroups 7 }
dIpmcExtOutgoingPortsInfoGroup OBJECT-GROUP
OBJECTS {
dIpmcExtGrpOutgoingPort
}
STATUS current
DESCRIPTION
"A collection of objects provides outgoing ports information for
multicast group address."
::= { dIpmcExtGroups 8 }
dIpmcExtIgmpStatisticsGroup OBJECT-GROUP
OBJECTS {
dIpmcExtIgmpPortIfV1RxReport,
dIpmcExtIgmpPortIfV1RxQuery,
dIpmcExtIgmpPortIfV1TxReport,
dIpmcExtIgmpPortIfV1TxQuery,
dIpmcExtIgmpPortIfV2RxReport,
dIpmcExtIgmpPortIfV2RxQuery,
dIpmcExtIgmpPortIfV2RxLeave,
dIpmcExtIgmpPortIfV2TxReport,
dIpmcExtIgmpPortIfV2TxQuery,
dIpmcExtIgmpPortIfV2TxLeave,
dIpmcExtIgmpPortIfV3RxReport,
dIpmcExtIgmpPortIfV3RxQuery,
dIpmcExtIgmpPortIfV3TxReport,
dIpmcExtIgmpPortIfV3TxQuery,
dIpmcExtIgmpPortIfRxUnknown,
dIpmcExtIgmpPortIfTxUnknown
}
STATUS current
DESCRIPTION
"A collection of objects provides statistics information about the
IGMP."
::= { dIpmcExtGroups 9 }
dIpmcExtPimStatisticsGroup OBJECT-GROUP
OBJECTS {
dIpmcExtPimPortIfRxHello,
dIpmcExtPimPortIfTxHello,
dIpmcExtPimPortIfRxRegister,
dIpmcExtPimPortIfTxRegister,
dIpmcExtPimPortIfRxRegisterStop,
dIpmcExtPimPortIfTxRegisterStop,
dIpmcExtPimPortIfRxJoinPrune,
dIpmcExtPimPortIfTxJoinPrune,
dIpmcExtPimPortIfRxBootstrap,
dIpmcExtPimPortIfTxBootstrap,
dIpmcExtPimPortIfRxAssert,
dIpmcExtPimPortIfTxAssert,
dIpmcExtPimPortIfRxGraft,
dIpmcExtPimPortIfTxGraft,
dIpmcExtPimPortIfRxGraftAck,
dIpmcExtPimPortIfTxGraftAck,
dIpmcExtPimPortIfRxCRpAdv,
dIpmcExtPimPortIfTxCRpAdv,
dIpmcExtPimPortIfRxStateRefresh,
dIpmcExtPimPortIfTxStateRefresh,
dIpmcExtPimPortIfRxUnknown,
dIpmcExtPimPortIfTxUnknown
}
STATUS current
DESCRIPTION
"A collection of objects provides statistics information about the
PIM."
::= { dIpmcExtGroups 10 }
dIpmcExtDvmrpStatisticsGroup OBJECT-GROUP
OBJECTS {
dIpmcExtDvmrpPortIfRxProbe,
dIpmcExtDvmrpPortIfTxProbe,
dIpmcExtDvmrpPortIfRxReport,
dIpmcExtDvmrpPortIfTxReport,
dIpmcExtDvmrpPortIfRxPrune,
dIpmcExtDvmrpPortIfTxPrune,
dIpmcExtDvmrpPortIfRxGraft,
dIpmcExtDvmrpPortIfTxGraft,
dIpmcExtDvmrpPortIfRxGraftAck,
dIpmcExtDvmrpPortIfTxGraftAck,
dIpmcExtDvmrpPortIfRxUnknown,
dIpmcExtDvmrpPortIfTxUnknown
}
STATUS current
DESCRIPTION
"A collection of objects provides statistics information about the
DVMRP."
::= { dIpmcExtGroups 11 }
END