mibs/MIBS/dlink/DLINKSW-PACKET-MONITOR-MIB
2023-12-05 12:25:34 +01:00

580 lines
24 KiB
Plaintext
Raw Permalink Blame History

-- *****************************************************************
-- DLINKSW-PACKET-MONITOR-MIB.mib : Packet Monitoring MIB
--
-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
--
-- *****************************************************************
DLINKSW-PACKET-MONITOR-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
Integer32
FROM SNMPv2-SMI
DisplayString, RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex, InterfaceIndexOrZero
FROM IF-MIB
VlanId
FROM Q-BRIDGE-MIB
dlinkIndustrialCommon
FROM DLINK-ID-REC-MIB;
dlinkSwPktMonitorMIB MODULE-IDENTITY
LAST-UPDATED "201407210000Z"
ORGANIZATION "D-Link Corp."
CONTACT-INFO
" D-Link Corporation
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
Taipei City 114, Taiwan, R.O.C
Tel: +886-2-66000123
E-mail: tsd@dlink.com.tw
"
DESCRIPTION
"This MIB module defines objects for configuring Monitoring Traffic.
Acronyms and terminology:
SPAN (Switched Port Analyzer): Mirror network traffic for analysis
by a network analyzer.
Local-SPAN: The SPAN feature is local when the monitored ports are
all located on the same switch as the destination port.
RSPAN (Remote SPAN): Source ports and destination ports that are
distributed across multiple switches, allowing one to monitor
any destination port located on the RSPAN VLAN."
REVISION "201407210000Z"
DESCRIPTION
"Added the dPktMonSessionSrcTxIfStgState for dPktMonSessionSrcTxIfTable."
REVISION "201309270000Z"
DESCRIPTION
"Added the dPktMonSessionRowStatus for dPktMonSessionTable.
Modified the MAX-ACCESS(read-write to read-create) for
dPktMonSessionDestRemoteVlanId, dPktMonSessionSourceRemoteVlanId
and dPktMonSessionDestInterface in dPktMonSessionTable.
Added the dPktMonSessionDestRemoteReplaceVlanTable for supporting
egress per flow RSPAN VLAN replacement on a RSPAN source switch."
REVISION "201303040000Z"
DESCRIPTION
"This is the first version of the MIB file."
::= { dlinkIndustrialCommon 12 }
-- -----------------------------------------------------------------------------
dPktMonMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwPktMonitorMIB 0 }
dPktMonMIBObjects OBJECT IDENTIFIER ::= { dlinkSwPktMonitorMIB 1 }
dPktMonMIBConformance OBJECT IDENTIFIER ::= { dlinkSwPktMonitorMIB 2 }
-- -----------------------------------------------------------------------------
-- Monitor Session Management
-- -----------------------------------------------------------------------------
dPktMonSessionTableCurrEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of entries present in the dPktMonSessionTable."
::= { dPktMonMIBObjects 1 }
dPktMonSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF DPktMonSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to create a packet monitoring session, allowing
packets on source ports or VLAN to be monitored via a
destination port."
::= { dPktMonMIBObjects 2 }
dPktMonSessionEntry OBJECT-TYPE
SYNTAX DPktMonSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in the dPktMonSessionTable describes configuration
information about Packet Monitoring."
INDEX { dPktMonSessionID }
::= { dPktMonSessionTable 1 }
DPktMonSessionEntry ::= SEQUENCE {
dPktMonSessionID Integer32,
dPktMonSessionSessionType INTEGER,
dPktMonSessionDestRemoteVlanId Integer32,
dPktMonSessionSourceRemoteVlanId Integer32,
dPktMonSessionDestInterface InterfaceIndexOrZero,
dPktMonSessionRowStatus RowStatus
}
dPktMonSessionID OBJECT-TYPE
SYNTAX Integer32 (1..80)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies the the packet
monitoring session associated with this information."
::= { dPktMonSessionEntry 1 }
dPktMonSessionSessionType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
localSession(1),
remoteSourceSession(2),
remoteDestinationSession(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the session type of the entry.
none (0):
Indicates the entry is inactive.
localSession (1):
Indicates the entry is operating as Local-SPAN.
remoteSourceSession (2):
Indicates the entry is operating as an RSPAN source session, which
associates SPAN source ports or VLANs with a destination RSPAN VLAN.
remoteDestinationSession (3):
Indicates the entry is operating as an RSPAN destination session.
An RSPAN destination session associates an RSPAN VLAN with a
destination port."
::= { dPktMonSessionEntry 2 }
dPktMonSessionDestRemoteVlanId OBJECT-TYPE
SYNTAX Integer32 (0 | 2..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the RSPAN VLAN ID on the RSPAN source session.
This object should be considered in conjunction with the
dPktMonSessionDestInterface.
When this object is set with valid VLAN ID (2 to 4094), the mirrored
packets are transmitted with an RSPAN VLAN tag from the destination
port.
If this object is set to 0, the destination RSPAN VLAN becomes
unspecified, then the mirrored traffic will be transmitted without
additional RSPAN VLAN tag."
::= { dPktMonSessionEntry 3 }
dPktMonSessionSourceRemoteVlanId OBJECT-TYPE
SYNTAX Integer32 (0 | 2..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set this object with valid VLAN ID (2 to 4094) for an RSPAN destination
session.
If this object is set to 0, the source RSPAN VLAN becomes
unspecified."
::= { dPktMonSessionEntry 4 }
dPktMonSessionDestInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the destination interface of the packet monitoring
session. Both physical ports and port channel are valid as
destination interfaces of monitor sessions.
A value of zero indicates that no interface is associated with
this monitoring session."
::= { dPktMonSessionEntry 5 }
dPktMonSessionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row."
::= { dPktMonSessionEntry 6 }
-- -----------------------------------------------------------------------------
dPktMonSessionSrcIfObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This object identifier represents the objects that are configured
the source interfaces for monitor sessions."
::= { dPktMonMIBObjects 3 }
dPktMonSessionSrcRxIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF DPktMonSessionSrcRxIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table consists of a list of source interface on which the packets
received for packet monitor sessions.
The first index element identifies the dPktMonSessionEntry that a
source interface (indicated by second index element) for monitoring
receiving packets (dPktMonSessionSrcRxIfEntry) belongs to. An entry
is removed from this table when its corresponding dPktMonSessionEntry
is deleted.
For a monitor session, to add or delete a source receiving interface
by creating or removing an entry in this table.
The valid interface includes: physical port/port channel/vlan and cpu.
"
::= { dPktMonSessionSrcIfObjects 1 }
dPktMonSessionSrcRxIfEntry OBJECT-TYPE
SYNTAX DPktMonSessionSrcRxIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in the dPktMonSessionSrcRxIfTable describes
the source interface on which the packets received for a monitor session."
INDEX { dPktMonSessionID, ifIndex }
::= { dPktMonSessionSrcRxIfTable 1 }
DPktMonSessionSrcRxIfEntry ::= SEQUENCE {
dPktMonSessionSrcRxIfRowStatus RowStatus
}
dPktMonSessionSrcRxIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Use this object to add/remove
an interface for a monitor session."
::= { dPktMonSessionSrcRxIfEntry 1 }
-- -----------------------------------------------------------------------------
dPktMonSessionSrcTxIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF DPktMonSessionSrcTxIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table consists of a list of source interface on which the packets
transmitted for packet monitor sessions.
The first index element identifies the dPktMonSessionEntry that a
source interface (indicated by second index element) for monitoring
transmitting packets (dPktMonSessionSrcTxIfEntry) belongs to. An entry
is removed from this table when its corresponding dPktMonSessionEntry is
deleted.
For a monitor session, to add or delete a source transmitting interface
by creating or removing an entry in this table.
"
::= { dPktMonSessionSrcIfObjects 2 }
dPktMonSessionSrcTxIfEntry OBJECT-TYPE
SYNTAX DPktMonSessionSrcTxIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in the dPktMonSessionSrcTxIfTable describes
the source interface on which the packets transmitted for a monitor session."
INDEX { dPktMonSessionID, ifIndex }
::= { dPktMonSessionSrcTxIfTable 1 }
DPktMonSessionSrcTxIfEntry ::= SEQUENCE {
dPktMonSessionSrcTxIfRowStatus RowStatus,
dPktMonSessionSrcTxIfStgState INTEGER
}
dPktMonSessionSrcTxIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Use this object to add/remove
an interface for a monitor session."
::= { dPktMonSessionSrcTxIfEntry 1 }
dPktMonSessionSrcTxIfStgState OBJECT-TYPE
SYNTAX INTEGER {
no-care(1),
forwarding(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates if the monitoring of the packets transmitted
on the interface will be affected by the interface's STG status.
'no-care' - monitor the packets transmitted on the interface regardless
of the interface<63><65>s STG status.
'forwarding' - monitor the packets transmitted on the interface only when
the interface<63><65>s all STGs status are forwarding."
DEFVAL { no-care }
::= { dPktMonSessionSrcTxIfEntry 2 }
-- -----------------------------------------------------------------------------
dPktMonSessionSrcDropIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF DPktMonSessionSrcDropIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table consists of a list of source interface to monitor the
packets which dropped on received port.
The first index element identifies the dPktMonSessionEntry that a
source interface (indicated by second index element) for monitoring
dropped packets (dPktMonSessionSrcDropIfTable) belongs to. An entry
is removed from this table when its corresponding dPktMonSessionEntry
is deleted.
For a monitor session, to add or delete a source interface
for monitoring dropped packets by creating or removing an entry in
this table.
"
::= { dPktMonSessionSrcIfObjects 3 }
dPktMonSessionSrcDropIfEntry OBJECT-TYPE
SYNTAX DPktMonSessionSrcDropIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in the dPktMonSessionSrcDropIfTable describes
the source interface to monitor the packets which dropped on received port
for a monitor session."
INDEX { dPktMonSessionID, ifIndex }
::= { dPktMonSessionSrcDropIfTable 1 }
DPktMonSessionSrcDropIfEntry ::= SEQUENCE {
dPktMonSessionSrcDropIfRowStatus RowStatus
}
dPktMonSessionSrcDropIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. Use this object to add/remove
an interface for a port monitor session."
::= { dPktMonSessionSrcDropIfEntry 1 }
-- -----------------------------------------------------------------------------
-- Configuring ACL for Monitor Session
-- -----------------------------------------------------------------------------
dPktMonSessionSrcAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF DPktMonSessionSrcAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing associations between ACL and monitor session."
::= { dPktMonMIBObjects 4 }
dPktMonSessionSrcAclEntry OBJECT-TYPE
SYNTAX DPktMonSessionSrcAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry representing an access list association to
a monitor session."
INDEX { dPktMonSessionID, dPktMonSessionSrcAclName }
::= { dPktMonSessionSrcAclTable 1 }
DPktMonSessionSrcAclEntry ::= SEQUENCE {
dPktMonSessionSrcAclName DisplayString,
dPktMonSessionSrcAclRowStatus RowStatus
}
dPktMonSessionSrcAclName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the name of an access list for flow based monitoring.
Multiple access lists can be monitored on a session at a time. "
::= {dPktMonSessionSrcAclEntry 1}
dPktMonSessionSrcAclRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row."
::= { dPktMonSessionSrcAclEntry 2 }
-- -----------------------------------------------------------------------------
-- Configuring global RSPAN VLAN
-- -----------------------------------------------------------------------------
dPktMonRspanVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF DPktMonRspanVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing RSPAN VLAN information on the
VLANs which currently configured as RSPAN VLAN."
::= { dPktMonMIBObjects 5 }
dPktMonRspanVlanEntry OBJECT-TYPE
SYNTAX DPktMonRspanVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in the dPktMonRspanVlanTable indicates
the VLAN is configured as RSPAN VLAN.
An entry is created/removed when RSPAN VLAN is enabled
or disabled at the VLAN via CLI or by issuing appropriate
sets to this table using snmp."
INDEX { dPktMonRspanVlanId }
::= { dPktMonRspanVlanTable 1 }
DPktMonRspanVlanEntry ::= SEQUENCE {
dPktMonRspanVlanId VlanId,
dPktMonRspanVlanRowStatus RowStatus
}
dPktMonRspanVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN number.
When a VLAN is specified as an RSPAN VLAN, the MAC address
learning on the RSPAN VLAN is disabled."
::= { dPktMonRspanVlanEntry 1 }
dPktMonRspanVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row."
::= { dPktMonRspanVlanEntry 2 }
-- -----------------------------------------------------------------------------
-- Configuring Egress Replace RSPAN VLAN for Monitor Session
-- -----------------------------------------------------------------------------
dPktMonSessionDestRemoteReplaceVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF DPktMonSessionDestRemoteReplaceVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing associations between replace RSPAN VLAN egress
per flow and monitor session.
For a RSPAN source session, multiple flows of VLAN replacement can
be configured."
::= { dPktMonMIBObjects 6 }
dPktMonSessionDestRemoteReplaceVlanEntry OBJECT-TYPE
SYNTAX DPktMonSessionDestRemoteReplaceVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry representing an access list and replace VLAN
association to a monitor session."
INDEX { dPktMonSessionID, dPktMonSessionDestRemoteAccessListName,dPktMonSessionDestRemoteReplaceVlanId }
::= { dPktMonSessionDestRemoteReplaceVlanTable 1 }
DPktMonSessionDestRemoteReplaceVlanEntry ::= SEQUENCE {
dPktMonSessionDestRemoteAccessListName DisplayString,
dPktMonSessionDestRemoteReplaceVlanId VlanId,
dPktMonSessionDestRemoteReplaceVlanRowStatus RowStatus
}
dPktMonSessionDestRemoteAccessListName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the name of an access list for egress per flow RSPAN VLAN
replacement."
::= {dPktMonSessionDestRemoteReplaceVlanEntry 1}
dPktMonSessionDestRemoteReplaceVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the VLAN ID used to replace RSPAN VLAN ID for the matched
flow of packets transmitted out from the destination interface on a
RSPAN source switch."
::= {dPktMonSessionDestRemoteReplaceVlanEntry 2}
dPktMonSessionDestRemoteReplaceVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row."
::= { dPktMonSessionDestRemoteReplaceVlanEntry 3 }
-- -----------------------------------------------------------------------------
-- MIB Conformance statements
-- -----------------------------------------------------------------------------
dPktMonMIBCompliances OBJECT IDENTIFIER
::= { dPktMonMIBConformance 1 }
dPktMonMIBGroups OBJECT IDENTIFIER
::= { dPktMonMIBConformance 2 }
dPktMonMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
DLINKSW-PACKET-MONITOR-MIB."
MODULE -- this module
MANDATORY-GROUPS { dPktMonBasicGroup }
GROUP dPktMonRspanGroup
DESCRIPTION
"The group is required when the RSPAN is supported."
GROUP dPktMonFlowBasedMirrorGroup
DESCRIPTION
"The group is required when the flow based mirror is supported."
GROUP dPktMonMonitorDropPktGroup
DESCRIPTION
"The group is required when the monitoring dropped packets is supported."
GROUP dPktMonDestRemoteReplaceVlanGroup
DESCRIPTION
"The group is required when the egress per flow RSPAN VLAN replacement is supported."
::= { dPktMonMIBCompliances 1 }
dPktMonBasicGroup OBJECT-GROUP
OBJECTS {
dPktMonSessionTableCurrEntries,
dPktMonSessionDestInterface,
dPktMonSessionRowStatus,
dPktMonSessionSrcRxIfRowStatus,
dPktMonSessionSrcTxIfRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing basic packet monitoring
configuration."
::= { dPktMonMIBGroups 1 }
dPktMonRspanGroup OBJECT-GROUP
OBJECTS {
dPktMonSessionSessionType,
dPktMonSessionDestRemoteVlanId,
dPktMonSessionSourceRemoteVlanId,
dPktMonRspanVlanRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing RSPAN configuration."
::= { dPktMonMIBGroups 2 }
dPktMonFlowBasedMirrorGroup OBJECT-GROUP
OBJECTS { dPktMonSessionSrcAclRowStatus }
STATUS current
DESCRIPTION
"A collection of objects providing flow based mirroring
configuration."
::= { dPktMonMIBGroups 3 }
dPktMonMonitorDropPktGroup OBJECT-GROUP
OBJECTS { dPktMonSessionSrcDropIfRowStatus }
STATUS current
DESCRIPTION
"A collection of objects provides the configuration for monitoring
dropped packets on source interfaces.
"
::= { dPktMonMIBGroups 4 }
dPktMonDestRemoteReplaceVlanGroup OBJECT-GROUP
OBJECTS { dPktMonSessionDestRemoteReplaceVlanRowStatus }
STATUS current
DESCRIPTION
"A collection of objects provides the configuration for
performing egress per flow RSPAN VLAN replacement on a
RSPAN source switch."
::= { dPktMonMIBGroups 5 }
END