805 lines
29 KiB
Plaintext
805 lines
29 KiB
Plaintext
EdgeSwitch-LOGGING-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- Copyright Broadcom Inc (2004-2007) All rights reserved.
|
|
|
|
-- This SNMP Management Information Specification
|
|
-- embodies Broadcom Inc's confidential and proprietary
|
|
-- intellectual property. Broadcom Inc retains all title
|
|
-- and ownership in the Specification including any revisions.
|
|
|
|
-- This Specification is supplied "AS IS", Broadcom Inc
|
|
-- makes no warranty, either expressed or implied,
|
|
-- as to the use, operation, condition, or performance of the
|
|
-- Specification.
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Gauge32,
|
|
Unsigned32, TimeTicks, NOTIFICATION-TYPE FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, DisplayString,
|
|
DateAndTime, RowStatus FROM SNMPv2-TC
|
|
fastPath FROM EdgeSwitch-REF-MIB
|
|
InetAddress, InetAddressType, InetPortNumber FROM INET-ADDRESS-MIB
|
|
agentInventoryComponentIndex FROM EdgeSwitch-INVENTORY-MIB
|
|
InterfaceIndexOrZero FROM IF-MIB;
|
|
|
|
AgentLogFacility ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Facility code used in determining the SysLog Priority value."
|
|
REFERENCE
|
|
"RFC3164 - 4.1.1: Table 1"
|
|
SYNTAX INTEGER {
|
|
kernel(0), -- kernel messages
|
|
user(1), -- user-level messages
|
|
mail(2), -- mail system
|
|
system(3), -- system daemons
|
|
security(4), -- security/authorization messages
|
|
syslog(5), -- messages generated internally by syslogd
|
|
lpr(6), -- line printer subsystem
|
|
nntp(7), -- network news subsystem
|
|
uucp(8), -- UUCP subsystem
|
|
cron(9), -- clock daemon
|
|
auth (10), -- security/authorization messages
|
|
ftp(11), -- FTP daemon
|
|
ntp(12), -- NTP subsystem
|
|
audit(13), -- log audit
|
|
alert(14), -- log alert
|
|
clock(15), -- clock daemon
|
|
local0(16), -- local use 0
|
|
local1(17), -- local use 1
|
|
local2(18), -- local use 2
|
|
local3(19), -- local use 3
|
|
local4(20), -- local use 4
|
|
local5(21), -- local use 5
|
|
local6(22), -- local use 6
|
|
local7(23) -- local use 7
|
|
}
|
|
|
|
AgentLogSeverity ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Severity code used in determining the SysLog Priority value."
|
|
REFERENCE
|
|
"RFC3164 - 4.1.1: Table 2"
|
|
SYNTAX INTEGER {
|
|
emergency(0), -- System is unusable. System failure has occurred.
|
|
alert(1), -- Action must be taken immediately. Unrecoverable
|
|
-- failure of a component. System failure likely.
|
|
critical(2), -- Critical conditions. Recoverable failure of a
|
|
-- component that may lead to system failure.
|
|
error(3), -- Error conditions. Recoverable failure of a component.
|
|
warning(4), -- Warning conditions. Minor failure, e.g.
|
|
-- misconfiguration of a component.
|
|
notice(5), -- Normal but significant conditions.
|
|
informational(6), -- Informational messages.
|
|
debug(7) -- Debug-level messages.
|
|
}
|
|
|
|
fastPathLogging MODULE-IDENTITY
|
|
LAST-UPDATED "201101260000Z" -- 26 Jan 2011 12:00:00 GMT
|
|
ORGANIZATION "Broadcom Inc"
|
|
CONTACT-INFO ""
|
|
DESCRIPTION
|
|
"This MIB provides objects to configure and display events logged
|
|
on this system."
|
|
|
|
-- Revision history.
|
|
REVISION
|
|
"201101260000Z" -- 26 Jan 2011 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Postal address updated."
|
|
REVISION
|
|
"200705230000Z" -- 23 May 2007 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Ubiquiti branding related changes."
|
|
REVISION
|
|
"200410261303Z" -- Tue Oct 23 13:03:07 2004 GMT
|
|
DESCRIPTION
|
|
"Initial version."
|
|
|
|
::= { fastPath 14 }
|
|
|
|
--**************************************************************************************
|
|
-- agentLogConfigGroup
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentLogConfigGroup OBJECT IDENTIFIER ::= { fastPathLogging 1 }
|
|
|
|
--**************************************************************************************
|
|
-- agentLogInMemoryConfigGroup
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentLogInMemoryConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 1 }
|
|
|
|
agentLogInMemoryAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administratively enable/disable the In Memory log."
|
|
::= { agentLogInMemoryConfigGroup 1 }
|
|
|
|
|
|
agentLogInMemoryBehavior OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
wrap(1),
|
|
stop-on-full(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the behavior of the In Memory Log when it becomes full. A value of
|
|
wrap(1) will cause the oldest log message to be removed, making room for the new
|
|
message. A value of stop-on-full(2) will prevent any further logging."
|
|
::= { agentLogInMemoryConfigGroup 4 }
|
|
|
|
--**************************************************************************************
|
|
-- agentLogConsoleConfigGroup
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentLogConsoleConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 2 }
|
|
|
|
agentLogConsoleAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Admin mode for console logs"
|
|
::= { agentLogConsoleConfigGroup 1 }
|
|
|
|
agentLogConsoleSeverityFilter OBJECT-TYPE
|
|
SYNTAX AgentLogSeverity
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Severity filter for console logs"
|
|
::= { agentLogConsoleConfigGroup 2 }
|
|
|
|
|
|
--**************************************************************************************
|
|
-- agentLogSysLogConfigGroup
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentLogSysLogConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 4 }
|
|
|
|
agentLogSyslogAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For Enabling and Disabling logging to configured syslog hosts. Setting this to disable
|
|
stops logging to all syslog hosts."
|
|
::= { agentLogSysLogConfigGroup 1 }
|
|
|
|
agentLogSyslogLocalPort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the port on the local host from which syslog messages are sent."
|
|
::= { agentLogSysLogConfigGroup 3 }
|
|
|
|
agentLogSyslogMaxHosts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of hosts that can be configured for logging syslog messages."
|
|
::= { agentLogSysLogConfigGroup 4 }
|
|
--**************************************************************************************
|
|
-- agentLogCliCommandsConfigGroup
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentLogCliCommandsConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 5 }
|
|
|
|
agentLogCliCommandsAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administratively enable/disable the logging of the CLI Commands "
|
|
::= { agentLogCliCommandsConfigGroup 1 }
|
|
|
|
--**************************************************************************************
|
|
-- agentLogWebConfigGroup
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentLogWebConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 7 }
|
|
|
|
agentLogWebAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administratively enable/disable the logging of the Web "
|
|
::= { agentLogWebConfigGroup 1 }
|
|
|
|
--**************************************************************************************
|
|
-- agentLogSnmpConfigGroup
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentLogSnmpConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 8 }
|
|
|
|
agentLogSnmpAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administratively enable/disable the logging of the Snmp "
|
|
::= { agentLogSnmpConfigGroup 1 }
|
|
|
|
--**************************************************************************************
|
|
-- agentLogAuditConfigGroup
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentLogAuditConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 9 }
|
|
|
|
agentLogAuditAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administratively enable/disable Switch Auditing "
|
|
::= { agentLogAuditConfigGroup 1 }
|
|
--**************************************************************************************
|
|
-- agentLogSyslogHostTable
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentLogSyslogHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentLogSyslogHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Syslog host table containing syslog host entries."
|
|
::= { agentLogSysLogConfigGroup 5 }
|
|
|
|
agentLogSyslogHostEntry OBJECT-TYPE
|
|
SYNTAX AgentLogSyslogHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Syslog Host entry attributes."
|
|
INDEX { agentLogHostTableIndex }
|
|
::= { agentLogSyslogHostTable 1 }
|
|
|
|
AgentLogSyslogHostEntry ::=
|
|
SEQUENCE {
|
|
agentLogHostTableIndex
|
|
Unsigned32,
|
|
agentLogHostTableIpAddress
|
|
InetAddress,
|
|
agentLogHostTableIpAddressType
|
|
InetAddressType,
|
|
agentLogHostTablePort
|
|
Unsigned32,
|
|
agentLogHostTableSeverityFilter
|
|
AgentLogSeverity,
|
|
agentLogHostTableRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
agentLogHostTableIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index to syslog host entry in syslog host table."
|
|
::= { agentLogSyslogHostEntry 1 }
|
|
|
|
agentLogHostTableIpAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Syslog Host table IP Address Type."
|
|
::= { agentLogSyslogHostEntry 2 }
|
|
|
|
agentLogHostTableIpAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Syslog Host table IP Address. Set operation of this object can be successful
|
|
only when the valid IpAddressType (Ipv4, Ipv6 or DNS) is configured and the
|
|
address specified is valid for that Address type."
|
|
::= { agentLogSyslogHostEntry 3 }
|
|
|
|
agentLogHostTablePort OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Syslog Host table port number."
|
|
::= { agentLogSyslogHostEntry 4 }
|
|
|
|
agentLogHostTableSeverityFilter OBJECT-TYPE
|
|
SYNTAX AgentLogSeverity
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configures the minimum severity that will be stored in the In Memory log."
|
|
::= { agentLogSyslogHostEntry 5 }
|
|
|
|
agentLogHostTableRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Syslog Host table row status"
|
|
::= { agentLogSyslogHostEntry 7 }
|
|
|
|
--**************************************************************************************
|
|
-- agentLogSyslogSourceInterface
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentLogSyslogSourceInterface OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A source-interface selection on an Interface Index (like vlan based
|
|
routing interface, port based routing interface, loopback interface,
|
|
tunnel interface). A non-zero value indicates ifIndex for the
|
|
corresponding interface entry in the ifTable is selected.
|
|
A zero value indicates the source-interface un-selection."
|
|
::= { agentLogSysLogConfigGroup 6 }
|
|
|
|
--**************************************************************************************
|
|
-- agentLogStatisticsGroup
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentLogStatisticsGroup OBJECT IDENTIFIER ::= { fastPathLogging 2 }
|
|
|
|
agentLogMessagesReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of messages received by the log process. This includes messages that are
|
|
dropped or ignored."
|
|
::= { agentLogStatisticsGroup 1 }
|
|
|
|
agentLogMessagesDropped OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of messages that could not be processed due to error or lack of resources."
|
|
::= { agentLogStatisticsGroup 2 }
|
|
|
|
agentLogSyslogMessagesRelayed OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of messages forwarded by the syslog function to a syslog host. Messages forwarded
|
|
to multiple hosts are counted once for each host."
|
|
::= { agentLogStatisticsGroup 3 }
|
|
|
|
agentLogSyslogMessagesIgnored OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of messages that were not processed by the syslog process because the component name
|
|
or the priority level did not match any specification."
|
|
::= { agentLogStatisticsGroup 4 }
|
|
|
|
agentLogMessageReceivedTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local time when a message was last received by the log subsystem specified as the number of
|
|
non-leap seconds since 00:00:00 UTC on January 1 1970."
|
|
::= { agentLogStatisticsGroup 5 }
|
|
|
|
agentLogSyslogMessageDeliveredTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local time when a message was last delivered to a syslog host specified as the number of non-leap
|
|
seconds since 00:00:00 UTC on January 1 1970."
|
|
::= { agentLogStatisticsGroup 6 }
|
|
|
|
--**************************************************************************************
|
|
-- agentLogemailAlertConfigGroup
|
|
--
|
|
--**************************************************************************************
|
|
agentLogEmailAlertConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 6 }
|
|
|
|
agentLogEmailAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For Enabling and Disabling email alerts to SMTP server. Setting this to disable
|
|
stops emailing to SMTP servers."
|
|
::= { agentLogEmailAlertConfigGroup 1 }
|
|
|
|
agentLogEmailfromAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Email from Address"
|
|
::= { agentLogEmailAlertConfigGroup 2 }
|
|
|
|
agentLogEmaillogDuration OBJECT-TYPE
|
|
SYNTAX Unsigned32(30..1440)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This duration in minutes determines how frequently the non critical messages are sent to the SMTP server."
|
|
::= { agentLogEmailAlertConfigGroup 3 }
|
|
|
|
agentLogEmailUrgentSeverity OBJECT-TYPE
|
|
SYNTAX AgentLogSeverity
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the severity level for the critical log messages"
|
|
::= { agentLogEmailAlertConfigGroup 4 }
|
|
|
|
agentLogEmailNonUrgentSeverity OBJECT-TYPE
|
|
SYNTAX AgentLogSeverity
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the severity level for the non critical log messages."
|
|
::= { agentLogEmailAlertConfigGroup 5 }
|
|
|
|
agentLogEmailTrapsSeverity OBJECT-TYPE
|
|
SYNTAX AgentLogSeverity
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the severity level for Trap messages."
|
|
::= { agentLogEmailAlertConfigGroup 6 }
|
|
|
|
|
|
|
|
agentLogEmailToAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentLogEmailToAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the destination email address and the message type."
|
|
::= { agentLogEmailAlertConfigGroup 7 }
|
|
|
|
agentLogEmailToAddrEntry OBJECT-TYPE
|
|
SYNTAX AgentLogEmailToAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the agentLogEmailtoAddrTable. This entry shows what kind of messages go to the given destination email addresses."
|
|
INDEX { agentLogEmailToAddrMessageType, agentLogEmailToAddr}
|
|
::= { agentLogEmailToAddrTable 1 }
|
|
|
|
AgentLogEmailToAddrEntry ::= SEQUENCE {
|
|
agentLogEmailToAddrMessageType INTEGER,
|
|
agentLogEmailToAddr DisplayString,
|
|
agentLogEmailToAddrEntryStatus RowStatus
|
|
}
|
|
|
|
agentLogEmailToAddrMessageType OBJECT-TYPE
|
|
SYNTAX INTEGER { critical(1), non-critical(2) }
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Log message Type"
|
|
::= { agentLogEmailToAddrEntry 1 }
|
|
|
|
agentLogEmailToAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Email Sender Address"
|
|
::= { agentLogEmailToAddrEntry 2 }
|
|
|
|
|
|
agentLogEmailToAddrEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to create or delete the entry"
|
|
::= { agentLogEmailToAddrEntry 3 }
|
|
|
|
agentLogEmailSubjectTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentLogEmailSubjectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the subject of the email and the message type."
|
|
::= { agentLogEmailAlertConfigGroup 8 }
|
|
|
|
agentLogEmailSubjectEntry OBJECT-TYPE
|
|
SYNTAX AgentLogEmailSubjectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the agentLogEmailtoAddrTable. This entry shows what kind of subject to be used for the given message type."
|
|
INDEX { agentLogEmailSubjectMessageType}
|
|
::= { agentLogEmailSubjectTable 1 }
|
|
|
|
AgentLogEmailSubjectEntry ::= SEQUENCE {
|
|
agentLogEmailSubjectMessageType INTEGER,
|
|
agentLogEmailSubject DisplayString,
|
|
agentLogEmailSubjectEntryStatus RowStatus
|
|
}
|
|
|
|
agentLogEmailSubjectMessageType OBJECT-TYPE
|
|
SYNTAX INTEGER { critical(1), non-critical(2)}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Log message Type"
|
|
::= { agentLogEmailSubjectEntry 1 }
|
|
|
|
agentLogEmailSubject OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Email Subject. When this object is set to empty-string, it resets to
|
|
factory default string."
|
|
::= { agentLogEmailSubjectEntry 2}
|
|
|
|
|
|
agentLogEmailSubjectEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to create or delete the entry"
|
|
::= { agentLogEmailSubjectEntry 3 }
|
|
|
|
agentLogEmailMailServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentLogEmailMailServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the mail servers"
|
|
::= { agentLogEmailAlertConfigGroup 9 }
|
|
|
|
agentLogEmailMailServerEntry OBJECT-TYPE
|
|
SYNTAX AgentLogEmailMailServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the agentLogEmailMailServerTable. This entry shows the conmfiguration for mail server."
|
|
INDEX { agentLogEmailSmtpAddrType, agentLogEmailSmtpAddr }
|
|
::= { agentLogEmailMailServerTable 1 }
|
|
|
|
AgentLogEmailMailServerEntry ::= SEQUENCE {
|
|
agentLogEmailSmtpAddrType InetAddressType,
|
|
agentLogEmailSmtpAddr InetAddress,
|
|
agentLogEmailSmtpPort InetPortNumber,
|
|
agentLogEmailSecurity INTEGER,
|
|
agentLogEmailloginID DisplayString,
|
|
agentLogEmailPassword DisplayString,
|
|
agentLogEmailEntryStatus RowStatus
|
|
|
|
}
|
|
|
|
agentLogEmailSmtpAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Email SMTP Address type"
|
|
::= { agentLogEmailMailServerEntry 1 }
|
|
|
|
agentLogEmailSmtpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SMTP server Address"
|
|
::= { agentLogEmailMailServerEntry 2 }
|
|
|
|
agentLogEmailSmtpPort OBJECT-TYPE
|
|
SYNTAX InetPortNumber
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SMTP Port number. When this object is set to 0, it resets to
|
|
factory default port number."
|
|
::= { agentLogEmailMailServerEntry 3 }
|
|
|
|
agentLogEmailSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER { none(1), tlsv1(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the authentication mechanism that should be used."
|
|
::= { agentLogEmailMailServerEntry 4 }
|
|
|
|
|
|
agentLogEmailloginID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This user id is used while the switch/router is being authenticated by the SMTP server.The user ID
|
|
should be minimum of 1 charcter to maximum of 16 characters."
|
|
::= { agentLogEmailMailServerEntry 5 }
|
|
|
|
|
|
agentLogEmailPassword OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This password is used while the switch/router is being authenticated by the SMTP server.The password
|
|
should be minimum of 1 character to maximum of 16 characters."
|
|
::= { agentLogEmailMailServerEntry 6 }
|
|
|
|
agentLogEmailEntryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to create or delete the entry"
|
|
::= { agentLogEmailMailServerEntry 7 }
|
|
|
|
|
|
|
|
agentLogEmailAlertStatsGroup OBJECT IDENTIFIER ::= { agentLogStatisticsGroup 7}
|
|
|
|
|
|
agentLogEmailStatsemailsSentCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the count to show the no of emails sent so far."
|
|
::= { agentLogEmailAlertStatsGroup 1 }
|
|
|
|
agentLogEmailStatsemailsFailureCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the count to show the no of emails failures happened so far..."
|
|
::= { agentLogEmailAlertStatsGroup 2 }
|
|
|
|
agentLogEmailStatsTimeSinceLastEmailSent OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of seconds since the last email was sent."
|
|
::= { agentLogEmailAlertStatsGroup 3}
|
|
|
|
agentLogEmailStatsClear OBJECT-TYPE
|
|
SYNTAX INTEGER { enable(1), disable(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to clear the email alert stats."
|
|
::= { agentLogEmailAlertStatsGroup 4}
|
|
|
|
|
|
|
|
|
|
--**************************************************************************************
|
|
-- agentLogInMemoryGroup
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentLogInMemoryGroup OBJECT IDENTIFIER ::= { fastPathLogging 3 }
|
|
|
|
agentLogInMemoryLogCount OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of valid entries in the in-memory log."
|
|
::= { agentLogInMemoryGroup 1 }
|
|
|
|
--**************************************************************************************
|
|
-- agentLogInMemoryTable
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentLogInMemoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AgentLogInMemoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The in-memory log table containing sequence of in-memory log entries."
|
|
::= { agentLogInMemoryGroup 2 }
|
|
|
|
agentLogInMemoryEntry OBJECT-TYPE
|
|
SYNTAX AgentLogInMemoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An individual message entry in in-memory log table."
|
|
INDEX { agentLogInMemoryMsgIndex }
|
|
::= { agentLogInMemoryTable 1 }
|
|
|
|
AgentLogInMemoryEntry ::=
|
|
SEQUENCE {
|
|
agentLogInMemoryMsgIndex
|
|
Unsigned32,
|
|
agentLogInMemoryMsgText
|
|
DisplayString
|
|
}
|
|
|
|
agentLogInMemoryMsgIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index to message entry in the in-memory log table."
|
|
::= { agentLogInMemoryEntry 1 }
|
|
|
|
agentLogInMemoryMsgText OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Message text info for inmemory logged messages."
|
|
::= { agentLogInMemoryEntry 2 }
|
|
|
|
--**************************************************************************************
|
|
-- agentLogTrapsGroup
|
|
--
|
|
--**************************************************************************************
|
|
|
|
agentLogTrapsGroup OBJECT IDENTIFIER ::= { fastPathLogging 5 }
|
|
|
|
agentLogEmailAlertTrapsGroup OBJECT IDENTIFIER ::= { agentLogTrapsGroup 1}
|
|
|
|
agentLogEmailSendFailed NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
agentLogEmailStatsemailsFailureCount -- No of emails Failed
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When ever a mail sending to the SMTP server is failed, this trap is sent with a count of how many times the connection to the SMTP server is failed so far."
|
|
::= { agentLogEmailAlertTrapsGroup 1 }
|
|
|
|
END
|