2758 lines
89 KiB
Plaintext
2758 lines
89 KiB
Plaintext
-- Revision 3.01 10/21/2018
|
|
MERIDIAN2-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
Counter32, enterprises FROM SNMPv2-SMI
|
|
DisplayString FROM SNMPv2-TC;
|
|
|
|
endRunTechnologies MODULE-IDENTITY
|
|
LAST-UPDATED
|
|
"1810210000Z"
|
|
ORGANIZATION
|
|
"EndRun Technologies LLC"
|
|
CONTACT-INFO
|
|
"Technical Support 1-877-749-3878, support@endruntechnologies.com"
|
|
DESCRIPTION
|
|
"EndRun Technologies Enterprise MIB"
|
|
::= { endRunTechnologiesMIB 0 }
|
|
|
|
endRunTechnologiesMIB OBJECT IDENTIFIER ::= { enterprises 13827 }
|
|
|
|
-- Meridian2 GPS Product Group
|
|
|
|
meridian2GPS OBJECT IDENTIFIER ::= { endRunTechnologiesMIB 14 }
|
|
|
|
gntp OBJECT IDENTIFIER ::= { meridian2GPS 1 }
|
|
|
|
gntptrap OBJECT IDENTIFIER ::= { gntp 0 }
|
|
|
|
gps OBJECT IDENTIFIER ::= { meridian2GPS 2 }
|
|
|
|
gpstrap OBJECT IDENTIFIER ::= { gps 0 }
|
|
|
|
gCPUIO OBJECT IDENTIFIER ::= { meridian2GPS 3 }
|
|
|
|
gPlugInOptions OBJECT IDENTIFIER ::= { meridian2GPS 4 }
|
|
|
|
goptSlot1 OBJECT IDENTIFIER ::= { gPlugInOptions 1 }
|
|
|
|
goptSlot2 OBJECT IDENTIFIER ::= { gPlugInOptions 2 }
|
|
|
|
goptSlot3 OBJECT IDENTIFIER ::= { gPlugInOptions 3 }
|
|
|
|
goptSlot4 OBJECT IDENTIFIER ::= { gPlugInOptions 4 }
|
|
|
|
goptSlot5 OBJECT IDENTIFIER ::= { gPlugInOptions 5 }
|
|
|
|
gptp0 OBJECT IDENTIFIER ::= { meridian2GPS 5 }
|
|
|
|
gptp1 OBJECT IDENTIFIER ::= { meridian2GPS 6 }
|
|
|
|
-- gntp branch of the Meridian2 GPS subtree
|
|
|
|
gntpTrapLeapIndBitsChange NOTIFICATION-TYPE
|
|
OBJECTS { gntpLeapIndBits }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A gntpTrapNTPLeapIndBitsChange trap signifies that the value of the leap
|
|
indicator bits contained in the NTP reply packets sent by the time server
|
|
has changed. The current value of these bits is contained in the included
|
|
gntpLeapIndBits. The decimal value of these bits ranges from 0 to 3:
|
|
|
|
0 is the no fault, no leap warning condition
|
|
1 is the no fault, leap second insertion warning condition
|
|
2 is the no fault, leap second deletion warning condition
|
|
3 is the unsynchronized, alarm condition"
|
|
::= { gntptrap 1 }
|
|
|
|
gntpTrapStratumChange NOTIFICATION-TYPE
|
|
OBJECTS { gntpStratum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A gntpTrapStratumChange trap signifies that the value of the stratum
|
|
field contained in the NTP reply packets sent by the time server
|
|
has changed. The current value is contained in the included
|
|
variable, gntpStratum. The decimal value of this field ranges from 1 to 16:
|
|
|
|
1 is the synchronized, actively locked to the reference UTC source stratum
|
|
2 is the synchronized, actively locked to a network stratum 1 server stratum
|
|
16 is the unsynchronized stratum level"
|
|
::= { gntptrap 2 }
|
|
|
|
gntpTimeSinceRst OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time since NTP daemon restart."
|
|
::= { gntp 1 }
|
|
|
|
gntpIRQsHandled OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of Interrupts handled by the NTP daemon."
|
|
::= { gntp 2 }
|
|
|
|
gntpRxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of NTP request packets received by the NTP daemon."
|
|
::= { gntp 3 }
|
|
|
|
gntpRxPktsByIRQ OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of NTP request packets received via IRQ by the NTP daemon."
|
|
::= { gntp 4 }
|
|
|
|
gntpTxPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of NTP reply packets transmitted by the NTP daemon."
|
|
::= { gntp 5 }
|
|
|
|
gntpSentPktsPerSecond OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP reply packets sent per second by the NTP daemon."
|
|
::= { gntp 6 }
|
|
|
|
gntpUnSentPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of NTP reply packets unsent by the NTP daemon."
|
|
::= { gntp 7 }
|
|
|
|
gntpIgnoredPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of NTP request packets ignored by the NTP daemon."
|
|
::= { gntp 8 }
|
|
|
|
gntpDroppedPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of NTP request packets dropped by the NTP daemon."
|
|
::= { gntp 9 }
|
|
|
|
gntpAuthFail OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of authentication failures detected by the NTP daemon."
|
|
::= { gntp 10 }
|
|
|
|
gntpTimeFigureOfMerit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
lessthan100ns (3),
|
|
lessthan1us (4),
|
|
lessthan10us (5),
|
|
lessthan100us (6),
|
|
lessthan1ms (7),
|
|
lessthan10ms (8),
|
|
greaterthan10ms (9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Time Figure of Merit (TFOM) value ranges from 3 to 9 and indicates the
|
|
current estimate of the worst case time error. It is a logarithmic scale,
|
|
with each increment indicating a tenfold increase in the worst case time
|
|
error boundaries.
|
|
|
|
The scale is referenced to a worst case time error of 100 picoseconds,
|
|
equivalent to a TFOM of zero. During normal locked operation with GPS the
|
|
TFOM is 3 and implies a worst case time error of 100 nanoseconds.
|
|
|
|
During periods of signal loss, the GPS sub-system will compute an
|
|
extrapolated worst case time error. One hour after the worst case time error
|
|
has reached the value equivalent to a TFOM of TFOM Fault Level, the NTP server
|
|
will cease to send stratum 1 reply packets and an Alarm LED will be energized."
|
|
::= { gntp 11 }
|
|
|
|
gntpLeapIndBits OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noFaultorLeap (0),
|
|
leapInsWarning (1),
|
|
leapDelWarning (2),
|
|
unSynchronized (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a status code indicating: normal operation, a leap second to
|
|
be inserted in the last minute of the current day, a leap second to be
|
|
deleted in the last second of the day or an alarm condition indicating
|
|
loss of timing synchronization. The leap indicator field of NTP reply
|
|
packets sent from this server is set to gntpLeapIndBits."
|
|
::= { gntp 12 }
|
|
|
|
gntpSyncSource OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an ASCII string identifying the synchronization source for this
|
|
NTP server. It is one of GPS, an IP address of a stratum 1 server, or NONE.
|
|
If it is NONE, then the server is not synchronized, has its Leap Indicator
|
|
Bits in the Alarm state and is running at Stratum 16. If it is an IP
|
|
address, then the server is operating as a stratum 2 server synchronized to
|
|
the network connected stratum 1 server whose IP address is shown.
|
|
|
|
Check the Stratum, Leap Indicator Bits and Time Figure of Merit for further
|
|
information. NTP reply packets from this server will have the reference
|
|
identifier field set to gntpSyncSource if it is GPS. Otherwise
|
|
it will be set to either an IP address or 0.0.0.0 (NONE)."
|
|
::= { gntp 13 }
|
|
|
|
gntpOffsetToGPSReference OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an ASCII string containing the floating value of the current
|
|
offset in units of seconds of the NTP server CPU clock to the GPS
|
|
reference time. Positive values imply that the NTP server clock is
|
|
ahead of the GPS reference time."
|
|
::= { gntp 14 }
|
|
|
|
gntpStratum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
gntpStratumOne (1),
|
|
gntpStratumTwo (2),
|
|
gntpStratumUnsync (16)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an integer showing the current stratum level being reported by
|
|
the NTP daemon in its reply packets to clients. If it is 1, then the server
|
|
is fully synchronized and delivering Stratum 1 accuracy. If it is greater
|
|
than 1 and less than 16, it is synchronized to a network connected NTP
|
|
server operating at one stratum lower. If it is 16, then the server is
|
|
unambiguously unsynchronized.
|
|
|
|
NTP clients on the network should be configured to not use the time from
|
|
this server if the stratum is 16."
|
|
::= { gntp 15 }
|
|
|
|
gntpVersion OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an ASCII string showing the system root file system firmware version."
|
|
::= { gntp 16 }
|
|
|
|
gntpKernelVersion OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an ASCII string showing the system Linux kernel firmware version."
|
|
::= { gntp 17 }
|
|
|
|
gntpOscType OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an ASCII string showing the installed oscillator type. It is
|
|
one of TCXO, MS-OCXO, HS-OCXO, US-OCXO, Rubidium, HS-Rubidium, US-Rubidium,
|
|
Cesium or US-Cesium."
|
|
::= { gntp 18 }
|
|
|
|
gntpTimeMode OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is an ASCII string showing the time mode of operation for any
|
|
optional IRIG timecode outputs or the optional front panel vacuum
|
|
fluorescent display. It DOES NOT indicate the time mode of the Linux
|
|
OS clock or the NTP sub-system. Both of these are ALWAYS UTC.
|
|
|
|
It can be LOCAL, GPS or UTC."
|
|
::= { gntp 19 }
|
|
|
|
gntpLocalOffset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the local time offset configured for any optional IRIG
|
|
timecode outputs or the optional front panel vacuum fluorescent display.
|
|
It is only pertinent when gntpTimeMode is set to LOCAL. It DOES NOT
|
|
indicate the local time offset of the Linux OS clock or the NTP sub-system.
|
|
Both of these are ALWAYS UTC.
|
|
|
|
Its units are half-hours, ranging from -25 to 25, where negative values
|
|
imply that the local time is behind UTC."
|
|
::= { gntp 20 }
|
|
|
|
gntpDSTStartMonth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled (0),
|
|
jan (1),
|
|
feb (2),
|
|
mar (3),
|
|
apr (4),
|
|
may (5),
|
|
jun (6),
|
|
jul (7),
|
|
aug (8),
|
|
sep (9),
|
|
oct (10),
|
|
nov (11),
|
|
dec (12)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the month that Daylight Savings Time begins. It affects
|
|
the local time operation of any optional IRIG timecode outputs or the
|
|
optional front panel vacuum fluorescent display. It is only pertinent
|
|
when gntpTimeMode is set to LOCAL. It DOES NOT affect the Linux OS
|
|
clock or the NTP sub-system. Both of these are ALWAYS UTC."
|
|
::= { gntp 21 }
|
|
|
|
gntpDSTStartSunday OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled (0),
|
|
firstSunday (1),
|
|
secondSunday (2),
|
|
thirdSunday (3),
|
|
fourthSunday (4),
|
|
lastSunday (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the Sunday of the month that Daylight Savings Time begins.
|
|
It affects the local time operation of any optional IRIG timecode outputs
|
|
or the optional front panel vacuum fluorescent display. It is only
|
|
pertinent when gntpTimeMode is set to LOCAL. It DOES NOT affect the Linux
|
|
OS clock or the NTP sub-system. Both of these are ALWAYS UTC."
|
|
::= { gntp 22 }
|
|
|
|
gntpDSTStartHour OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the hour that Daylight Savings Time begins. It affects the
|
|
local time operation of any optional IRIG timecode outputs or the optional
|
|
front panel vacuum fluorescent display. It is only pertinent when
|
|
gntpTimeMode is set to LOCAL. It DOES NOT affect the Linux OS clock or the
|
|
NTP sub-system. Both of these are ALWAYS UTC.
|
|
|
|
It ranges from 0 to 23, where 0 is midnight."
|
|
::= { gntp 23 }
|
|
|
|
gntpDSTStopMonth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled (0),
|
|
jan (1),
|
|
feb (2),
|
|
mar (3),
|
|
apr (4),
|
|
may (5),
|
|
jun (6),
|
|
jul (7),
|
|
aug (8),
|
|
sep (9),
|
|
oct (10),
|
|
nov (11),
|
|
dec (12)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the month that Daylight Savings Time ends. It affects
|
|
the local time operation of any optional IRIG timecode outputs or the
|
|
optional front panel vacuum fluorescent display. It is only pertinent
|
|
when gntpTimeMode is set to LOCAL. It DOES NOT affect the Linux OS
|
|
clock or the NTP sub-system. Both of these are ALWAYS UTC."
|
|
::= { gntp 24 }
|
|
|
|
gntpDSTStopSunday OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled (0),
|
|
firstSunday (1),
|
|
secondSunday (2),
|
|
thirdSunday (3),
|
|
fourthSunday (4),
|
|
lastSunday (5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the Sunday of the month that Daylight Savings Time ends.
|
|
It affects the local time operation of any optional IRIG timecode outputs
|
|
or the optional front panel vacuum fluorescent display. It is only
|
|
pertinent when gntpTimeMode is set to LOCAL. It DOES NOT affect the Linux
|
|
OS clock or the NTP sub-system. Both of these are ALWAYS UTC."
|
|
::= { gntp 25 }
|
|
|
|
gntpDSTStopHour OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the hour that Daylight Savings Time ends. It affects the
|
|
local time operation of any optional IRIG timecode outputs or the optional
|
|
front panel vacuum fluorescent display. It is only pertinent when
|
|
gntpTimeMode is set to LOCAL. It DOES NOT affect the Linux OS clock or the
|
|
NTP sub-system. Both of these are ALWAYS UTC.
|
|
|
|
It ranges from 0 to 23, where 0 is midnight."
|
|
::= { gntp 26 }
|
|
|
|
gntpCPUDieTemperature OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the current CPU internal die temperature, in
|
|
units of Celsius degrees in floating point notation."
|
|
::= { gntp 27 }
|
|
|
|
gntpCPUFreeMemory OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the CPU Free Memory in kiloBytes."
|
|
::= { gntp 28 }
|
|
|
|
gntpCPULoadAveragePerCent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the CPU Load Average as percent of total load."
|
|
::= { gntp 29 }
|
|
|
|
-- gps branch of the Meridian2 GPS subtree
|
|
|
|
gpsTrapFaultStatusChange NOTIFICATION-TYPE
|
|
OBJECTS { gpsFaultStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A gpsTrapFaultStatusChange trap signifies that the value of the least
|
|
significant two nibbles of th fault status word reported by the GPS
|
|
sub-system has changed. The current value is contained in the included
|
|
gpsFaultStatus."
|
|
::= { gpstrap 1 }
|
|
|
|
gpsTrapFault2StatusChange NOTIFICATION-TYPE
|
|
OBJECTS { gpsFault2Status }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A gpsTrapFault2StatusChange trap signifies that the value of the most
|
|
significant two nibbles of the fault status word reported by the GPS
|
|
sub-system has changed. The current value is contained in the included
|
|
gpsFault2Status."
|
|
::= { gpstrap 2 }
|
|
|
|
gpsTrapTimeFigureOfMeritChange NOTIFICATION-TYPE
|
|
OBJECTS { gpsTimeFigureOfMerit }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A gpsTrapTimeFigureOfMeritChange trap signifies that the value of the TFOM
|
|
reported by the GPS sub-system has changed. The current value is
|
|
contained in the included gpsTimeFigureOfMerit."
|
|
::= { gpstrap 3 }
|
|
|
|
gpsFaultStatus OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
gpsReceiverFlt (0),
|
|
gpsNTPNotPolling (1),
|
|
gpsRefTimeFlt (2),
|
|
gpsReceiverCommFlt (3),
|
|
gpsFLASHWriteFlt (4),
|
|
gpsFPGACfgFlt (5),
|
|
gpsNoSignalTimeout (6),
|
|
gpsDACNearLimit (7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a bit string contained in one character representing the
|
|
least significant two nibbles of the GPS fault status word. Unfortunately,
|
|
SNMP numbers the bits in the reverse order, so that the enumerated values
|
|
are backwards from the description contained in the User's Manual for the
|
|
fault status field returned by the gpsstat command. Each bit indicates
|
|
a fault when set. Currently defined fault states encoded in this value:
|
|
|
|
Bit 7: DAC controlling the TCXO is near the high or low limit.
|
|
Bit 6: Time Figure of Merit has been >= TFOM Fault Level for 1 hour.
|
|
Bit 5: Field Programmable Gate Array (FPGA) did not configure properly.
|
|
Bit 4: FLASH memory had a write fault.
|
|
Bit 3: GPS receiver communication fault.
|
|
Bit 2: GPS reference time fault (fails sanity checks).
|
|
Bit 1: NTP daemon is not polling the GPS reference clock.
|
|
Bit 0: GPS receiver fault.
|
|
|
|
ATTENTION: This object is deprecated for use in snmpget queries
|
|
due to a defect in reporting for one specific combination of bits. It
|
|
remains in this MIB for use with the gpsTrapFaultStatusChange object,
|
|
where it reports accurately.
|
|
|
|
Use the new gpsFaultNibble0Status and gpsFaultNibble1Status objects
|
|
for querying via snmpget."
|
|
::= { gps 1 }
|
|
|
|
gpsFault2Status OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
gpsSysPwrOvld (0),
|
|
gpsNotUsed1 (1),
|
|
gpsHP5071a (2),
|
|
gpsPlugInOpts (3),
|
|
gpsAntennaFlt (4),
|
|
gpsOscPLLFlt (5),
|
|
gpsSecPwrSplyFlt (6),
|
|
gpsPriPwrSplyFlt (7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a bit string contained in one character representing the
|
|
most significant two nibbles of the GPS fault status word. Unfortunately,
|
|
SNMP numbers the bits in the reverse order, so that the enumerated values
|
|
are backwards from the description contained in the User's Manual for the
|
|
fault status field returned by the gpsstat command. Each bit indicates
|
|
a fault when set. Currently defined fault states encoded in this value:
|
|
|
|
Bit 7: Primary Redundant Power Supply is Faulting.
|
|
Bit 6: Secondary Redundant Power Supply is Faulting.
|
|
Bit 5: Oscillator PLL Faulting.
|
|
Bit 4: GPS Antenna or Feedline is Shorted or Open.
|
|
Bit 3: Plug-In Option Fault.
|
|
Bit 2: HP5071A Cesium Option Fault.
|
|
Bit 1: Not Used.
|
|
Bit 0: Installed System Power Exceeds Maximum.
|
|
|
|
ATTENTION: This object is deprecated for use in snmpget queries
|
|
due to a defect in reporting for one specific combination of bits. It
|
|
remains in this MIB for use with the gpsTrapFaultStatusChange object,
|
|
where it reports accurately.
|
|
|
|
Use the new gpsFaultNibble2Status and gpsFaultNibble3Status objects
|
|
for querying via snmpget."
|
|
::= { gps 2 }
|
|
|
|
gpsReceiverFaultNibble0Status OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
gpsFLASHWriteFlt (0),
|
|
gpsFPGACfgFlt (1),
|
|
gpsNoSignalTimeout (2),
|
|
gpsDACNearLimit (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a bit string contained in one character representing the
|
|
least significant nibble of the GPS receiver fault status word.
|
|
Unfortunately, SNMP numbers the bits in the reverse order, so that the
|
|
enumerated values are backwards from the description contained in the
|
|
User's Manual for the fault status field returned by the cdmastat
|
|
command. Each bit indicates a fault when set. Currently defined fault states
|
|
encoded in this value:
|
|
|
|
Bit 3: GPS Receiver Main Oscillator Frequency Control DAC near high or low limit.
|
|
Bit 2: Time Figure of Merit has been >= TFOM Fault Level for 1 hour.
|
|
Bit 1: Field Programmable Gate Array (FPGA) Configuration Fault.
|
|
Bit 0: FLASH Memory Write Fault."
|
|
::= { gps 3 }
|
|
|
|
gpsReceiverFaultNibble1Status OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
gpsMainOscFlt (0),
|
|
gpsRefTimeFlt (1),
|
|
gpsSynthFlt (2),
|
|
gpsSynthNearLimit (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a bit string contained in one character representing the
|
|
second nibble of the GPS receiver fault status word. Unfortunately, SNMP
|
|
numbers the bits in the reverse order, so that the enumerated values are
|
|
backwards from the description contained in the User's Manual for the fault
|
|
status field returned by the cdmastat command. Each bit indicates a fault
|
|
when set. Currently defined fault states encoded in this value:
|
|
|
|
Bit 3: GPS Receiver Local Oscillator Synthesizer Fault.
|
|
Bit 2: GPS Receiver Local Oscillator Synthesizer Near Tuning Limit.
|
|
Bit 1: GPS Decoded Time Fails Sanity Checks.
|
|
Bit 0: GPS Receiver Main Oscillator Fault."
|
|
::= { gps 4 }
|
|
|
|
gpsReceiverFaultNibble2Status OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
gpsNotUsed0 (0),
|
|
gpsOscPLLFlt (1),
|
|
gpsAntennaOpen (2),
|
|
gpsAntennaShort (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a bit string contained in one character representing the
|
|
third nibble of the GPS receiver fault status word. Unfortunately, SNMP
|
|
numbers the bits in the reverse order, so that the enumerated values are
|
|
backwards from the description contained in the User's Manual for the fault
|
|
status field returned by the gpsstat command. Each bit indicates a fault
|
|
when set. Currently defined fault states encoded in this value:
|
|
|
|
Bit 3: GPS antenna is shorted.
|
|
Bit 2: GPS antenna is open.
|
|
Bit 1: Oscillator PLL Faulting.
|
|
Bit 0: Not Used."
|
|
::= { gps 5 }
|
|
|
|
gpsReceiverFaultNibble3Status OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
gpsNotUsed0 (0),
|
|
gpsNotUsed1 (1),
|
|
gpsNotUsed2 (2),
|
|
gpsNotUsed3 (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a bit string contained in one character representing the
|
|
most significant nibble of the GPS fault status word. Unfortunately,
|
|
SNMP numbers the bits in the reverse order, so that the enumerated values
|
|
are backwards from the description contained in the User's Manual for the
|
|
fault status field returned by the gpsstat command. Each bit indicates
|
|
a fault when set. Currently defined fault states encoded in this value:
|
|
|
|
Bit 3: Not Used.
|
|
Bit 2: Not Used.
|
|
Bit 1: Not Used.
|
|
Bit 0: Not Used."
|
|
::= { gps 6}
|
|
|
|
gpsTimeFigureOfMerit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
lessthan100ns (3),
|
|
lessthan1us (4),
|
|
lessthan10us (5),
|
|
lessthan100us (6),
|
|
lessthan1ms (7),
|
|
lessthan10ms (8),
|
|
greaterthan10ms (9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Time Figure of Merit (TFOM) value ranges from 3 to 9 and indicates
|
|
the current estimate of the worst case time error. It is a logarithmic
|
|
scale, with each increment indicating a tenfold increase in the worst case
|
|
time error boundaries. The scale is referenced to a worst case time error
|
|
of 100 picoseconds, equivalent to a TFOM of zero. During normal locked
|
|
operation the TFOM is 3 and implies a worst case time error of 100 nanoseconds.
|
|
|
|
During periods of signal loss, the GPS sub-system will compute an
|
|
extrapolated worst case time error. One hour after the worst case time error
|
|
has reached the value equivalent to a TFOM of TFOM Fault Level, the NTP server
|
|
will cease to send stratum 1 reply packets and an Alarm LED will be energized."
|
|
::= { gps 7 }
|
|
|
|
gpsSigProcState OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..5))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current GPS signal processor state. One of WRM, ACQ, LKG or LKD with
|
|
WRM indicating either an OCXO or Rubidium is warming up, ACQ indicating
|
|
the acquisition state and LKD the fully locked on state. This is the
|
|
status of the lock of the main system timing signals to the GPS Receiver."
|
|
::= { gps 8 }
|
|
|
|
gpsReceiverSigProcState OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..5))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current GPS Receiver signal processor state. One of ACQ, DET, LKG, TKG
|
|
or LKD with ACQ indicating the acquisition state and LKD the fully locked
|
|
on state."
|
|
::= { gps 9 }
|
|
|
|
gpsNumTrackSats OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current number of GPS satellites being tracked."
|
|
::= { gps 10 }
|
|
|
|
gpsAGC OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current 8 bit, Automatic Gain Control (AGC) DAC value. Typical values
|
|
are around 150, but antenna cable length, preamplifiers and signal splitters
|
|
will affect this parameter. More positive values have the effect of
|
|
increasing the RF gain."
|
|
::= { gps 11 }
|
|
|
|
gpsAvgCarrierToNoiseRatiodB OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the current average carrier to noise ratio of all
|
|
tracked satellites, in units of dB. Values less than 35 indicate weak
|
|
signal conditions."
|
|
::= { gps 12 }
|
|
|
|
gpsChannelTrkStat1 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel 1 tracking status of the GPS receiver. Information includes the
|
|
Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees
|
|
and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0,
|
|
then no satellite is being tracked in this channel."
|
|
::= { gps 13 }
|
|
|
|
gpsChannelTrkStat2 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel 2 tracking status of the GPS receiver. Information includes the
|
|
Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees
|
|
and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0,
|
|
then no satellite is being tracked in this channel."
|
|
::= { gps 14 }
|
|
|
|
gpsChannelTrkStat3 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel 3 tracking status of the GPS receiver. Information includes the
|
|
Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees
|
|
and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0,
|
|
then no satellite is being tracked in this channel."
|
|
::= { gps 15 }
|
|
|
|
gpsChannelTrkStat4 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel 4 tracking status of the GPS receiver. Information includes the
|
|
Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees
|
|
and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0,
|
|
then no satellite is being tracked in this channel."
|
|
::= { gps 16 }
|
|
|
|
gpsChannelTrkStat5 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel 5 tracking status of the GPS receiver. Information includes the
|
|
Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees
|
|
and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0,
|
|
then no satellite is being tracked in this channel."
|
|
::= { gps 17 }
|
|
|
|
gpsChannelTrkStat6 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel 6 tracking status of the GPS receiver. Information includes the
|
|
Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees
|
|
and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0,
|
|
then no satellite is being tracked in this channel."
|
|
::= { gps 18 }
|
|
|
|
gpsChannelTrkStat7 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel 7 tracking status of the GPS receiver. Information includes the
|
|
Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees
|
|
and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0,
|
|
then no satellite is being tracked in this channel."
|
|
::= { gps 19 }
|
|
|
|
gpsChannelTrkStat8 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel 8 tracking status of the GPS receiver. Information includes the
|
|
Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees
|
|
and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0,
|
|
then no satellite is being tracked in this channel."
|
|
::= { gps 20 }
|
|
|
|
gpsChannelTrkStat9 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel 9 tracking status of the GPS receiver. Information includes the
|
|
Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees
|
|
and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0,
|
|
then no satellite is being tracked in this channel."
|
|
::= { gps 21 }
|
|
|
|
gpsChannelTrkStat10 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel 10 tracking status of the GPS receiver. Information includes the
|
|
Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees
|
|
and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0,
|
|
then no satellite is being tracked in this channel."
|
|
::= { gps 22 }
|
|
|
|
gpsChannelTrkStat11 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel 11 tracking status of the GPS receiver. Information includes the
|
|
Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees
|
|
and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0,
|
|
then no satellite is being tracked in this channel."
|
|
::= { gps 23 }
|
|
|
|
gpsChannelTrkStat12 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel 12 tracking status of the GPS receiver. Information includes the
|
|
Satellite ID #, the Azimuth angle in degrees, the Elevation angle in degrees
|
|
and the Carrier to Noise ratio, C/No in dB. If the Satellite ID # is 0,
|
|
then no satellite is being tracked in this channel."
|
|
::= { gps 24 }
|
|
|
|
gpsLastPositionFix OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WGS-84 latitude, longitude and height above the reference ellipsoid of the
|
|
GPS antenna. Ellipsoid height may deviate from local Mean Sea Level by as
|
|
much as 100 meters. This value is the last instantaneous position fix as
|
|
reported by the GPS receiver. It is not averaged.
|
|
The Dilution of Precision metrics, PDOP, HDOP, VDOP and TDOP are also
|
|
shown. The last item, OORCnt is the Out-Of-Range count of fixes that are
|
|
too far from the current user-entered or averaged reference position. If
|
|
this value is non-zero, then the TRAIM algorithm is functioning to ensure
|
|
that system time and output signals are not affected by erroneous data
|
|
currently being received from the satellites."
|
|
::= { gps 25 }
|
|
|
|
gpsReferencePosition OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WGS-84 latitude, longitude and height above the reference ellipsoid of the
|
|
GPS antenna. Ellipsoid height may deviate from local Mean Sea Level by as
|
|
much as 100 meters. When the GPS Dynamic Mode is OFF or Static, this value
|
|
is the result of a 24 hour average of fixes that is used to establish the
|
|
precise timing reference position. It may also have been user-entered.
|
|
The RMS PDOP and Average Count for the current position average are also
|
|
shown. These will be zero if the unit is not operating in the position
|
|
average mode."
|
|
::= { gps 26 }
|
|
|
|
gpsRefPosSource OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..3))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string indicating the source of the GPS antenna reference position.
|
|
It is one of:
|
|
USR (user-supplied),
|
|
AVG (automatically determined by averaging thousands of 3-D position fixes),
|
|
DYN (current un-averaged 3-D position fix, operation is in dynamic mode),
|
|
UNK (unknown)."
|
|
::= { gps 27 }
|
|
|
|
gpsCurrentLeapSeconds OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the current difference in seconds between GPS time and UTC
|
|
time. GPS time is ahead of UTC time by this amount."
|
|
::= { gps 28 }
|
|
|
|
gpsFutureLeapSeconds OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the future difference in seconds between GPS time and UTC
|
|
time. Leap seconds may be inserted or deleted from the UTC timescale twice
|
|
during the year: Dec 31 and June 30 at UTC midnight. If this value is the
|
|
same as gpsCurrentLeapSeconds, then no leap second insertion or deletion
|
|
will occur at the next possible time. If it is different, then the change
|
|
will take affect at the next possible time. GPS time will be ahead of UTC
|
|
time by this amount."
|
|
::= { gps 29 }
|
|
|
|
gpsAlmanacLS OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value, LS is the current difference in seconds between GPS time and UTC
|
|
time as contained in the GPS Almanac UTC data. GPS time is ahead of UTC time
|
|
by this amount.
|
|
For more detailed information, consult the GPS-ICD-200."
|
|
::= { gps 30 }
|
|
|
|
gpsAlmanacLSF OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value, LSF is the future difference in seconds between GPS time and UTC
|
|
time as contained in the GPS Almanac UTC data. Leap seconds may be inserted
|
|
or deleted from the UTC timescale twice during the year: Dec 31 and June 30
|
|
at UTC midnight. If this value is the same as gpsAlmLS, then no leap second
|
|
insertion or deletion will occur at the next possible time. If it is different,
|
|
then the change will take affect at the time defined by the GPS Almanac
|
|
parameters, WN_lsf and DN. GPS time will be ahead of UTC time by this amount.
|
|
For more detailed information, consult the GPS-ICD-200."
|
|
::= { gps 31 }
|
|
|
|
gpsAlmanacUTCWNlsf OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value, WN_lsf is the GPS Week Number during which the UTC leap second offset
|
|
to GPS time will transition to the Leap Second Future value. The GPS week
|
|
numbers began on January 6, 1980 with week number 0. If a leap second has
|
|
recently been inserted, this week number could be in the past, in which case
|
|
the current and future leap seconds values will be equal.
|
|
For more detailed information, consult the GPS-ICD-200."
|
|
::= { gps 32 }
|
|
|
|
gpsAlmanacUTCDN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value, DN is the Day Number of the week in which the UTC leap second offset
|
|
to GPS time will transition to the Leap Second Future value. The GPS day numbers
|
|
begin on Sunday with day number 1. The leap second insertion occurs at the end
|
|
of the given day.
|
|
For more detailed information, consult the GPS-ICD-200."
|
|
::= { gps 33 }
|
|
|
|
gpsAlmanacA0 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the value of the a0 coefficient of the linear fit
|
|
of the UTC offset to GPS time. a0 is the constant term in the equation,
|
|
in units of seconds, in scientific floating point notation. The GPS and UTC
|
|
timescales are separated by leap seconds and another small error, typically
|
|
less than 10 nanoseconds, which is estimated using this linear fit.
|
|
For more detailed information, consult the GPS-ICD-200."
|
|
::= { gps 34 }
|
|
|
|
gpsAlmanacA1 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the value of the a1 coefficient of the linear fit
|
|
of the UTC offset to GPS time. a1 is the slope term in the equation, in units
|
|
of seconds per second, in scientific floating point notation. The GPS and UTC
|
|
timescales are separated by leap seconds and another small error, typically
|
|
less than 10 nanoseconds, which is estimated using this linear fit.
|
|
For more detailed information, consult the GPS-ICD-200."
|
|
::= { gps 35 }
|
|
|
|
gpsAlmanacUTCWNt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value, WN_t is the GPS Week Number during which the reference time for the
|
|
linear fit equation defined by a0 and a1 occurs. It is used along with t_ot
|
|
to calculate a value of GPS seconds to offset the linear fit in the time domain.
|
|
For more detailed information, consult the GPS-ICD-200."
|
|
::= { gps 36 }
|
|
|
|
gpsAlmanacUTCtot OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value, t_ot is the second of the GPS week WN_t at which time the linear fit
|
|
equation defined by a0 and a1 will evaluate to a0. The seconds range from 0 at the
|
|
beginning of day number 1 to 604799 at the end of day number 7.
|
|
For more detailed information, consult the GPS-ICD-200."
|
|
::= { gps 37 }
|
|
|
|
gpsGPSminusUTCOffsetPicoSecs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value, (GPS - UTC) is the current sub-seconds offset of the GPS timescale to
|
|
the UTC timescale, computed using the received GPS almanac parameters (WN_t, t_ot, a0
|
|
and a1) and the current GPS week number and time-of-week. The units are in picoseconds.
|
|
This value must be added to the current leap seconds offset to fully quantify the
|
|
amount that the GPS timescale is ahead of the UTC timescale.
|
|
For more detailed information, consult the GPS-ICD-200."
|
|
::= { gps 38 }
|
|
|
|
gpsSubsystemVersion OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the GPS subsystem firmware and FPGA versions."
|
|
::= { gps 39 }
|
|
|
|
gpsReceiverVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the GPS receiver firmware and FPGA versions."
|
|
::= { gps 40 }
|
|
|
|
gpsDynamicMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
gpsDynModeOFF (0),
|
|
gpsDynModeON (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The GPS dynamic mode is either on or off. When it is off, the server is
|
|
assumed to be in a static installation. In this case, single satellite mode
|
|
of operation is supported and Timing Receiver Autonomous Integrity Monitoring
|
|
(TRAIM) is supported. When the setting is on, the server is assumed to be on
|
|
a moving platform. In this case, minimum four satellite, 3-D operation is
|
|
required and the TRAIM functionality is minimal."
|
|
::= { gps 41 }
|
|
|
|
gpsCalibrationDelayNanoSecs OBJECT-TYPE
|
|
SYNTAX INTEGER (-500000..500000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signed integer representing the current calibration delay being applied to the
|
|
timing outputs, in units of nanoseconds. Positive values indicate that the
|
|
timing outputs are advanced."
|
|
::= { gps 42 }
|
|
|
|
gpsCoastDuration OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unsigned integer representing the current elapsed time since the unit lost
|
|
GPS reception in units of seconds."
|
|
::= { gps 43 }
|
|
|
|
gpsEstimatedTimeError OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the magnitude of the estimated time error since
|
|
the unit lost GPS reception, in units of seconds in scientific floating point
|
|
notation. While locked, the value is the magnitude of the measured time
|
|
error relative to GPS."
|
|
::= { gps 44 }
|
|
|
|
gpsMeasuredTimeError OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the measured time error of the timing outputs
|
|
relative to GPS, in units of seconds in scientific floating point
|
|
notation. While coasting, the value is the last measured value prior to
|
|
losing GPS reception."
|
|
::= { gps 45 }
|
|
|
|
gpsMeasurementTimeDeviation OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the time deviation (TDEV) of the GPS measurement
|
|
data, in units of seconds in scientific floating point notation. While
|
|
coasting, the value is the last computed value prior to losing GPS reception."
|
|
::= { gps 46 }
|
|
|
|
gpsOSCDAC OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1048575)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current 20 bit, System Voltage Controlled Oscillator DAC value. Typical
|
|
range is 320000 to 640000, where more positive numbers have the effect of
|
|
raising the oscillator frequency."
|
|
::= { gps 47 }
|
|
|
|
gpsMeasuredOscillatorAgeing OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the ageing rate per day of the installed osc-
|
|
illator, in scientific floating point notation. It is computed via linear
|
|
regression and requires several hours following initial lock to GPS to see
|
|
the first update. While coasting, the value is the last computed value
|
|
prior to losing GPS reception."
|
|
::= { gps 48 }
|
|
|
|
gpsControlLoopTimeConstant OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the current equivalent averaging time of the
|
|
oscillator control loop, in units of seconds in floating point notation.
|
|
The value is dynamically updated based on the stability of the oscillator."
|
|
::= { gps 49 }
|
|
|
|
gpsInternalTemperature OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the current internal chassis temperature, in
|
|
units of Celsius degrees in floating point notation. A value is only
|
|
available when the installed oscillator is an OCXO or Rubidium."
|
|
::= { gps 50 }
|
|
|
|
gpsAntennaFaultMask OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The GPS antenna fault mask is either on or off. When it is off, the server will
|
|
set the Antenna Fault Bit in the Fault Status Byte if an improper antenna impedance
|
|
is detected. When the setting is on, the server will not set the Antenna Fault Bit
|
|
in the Fault Status Byte if an improper antenna impedance is detected."
|
|
::= { gps 51 }
|
|
|
|
gpsSignalLossFaultMask OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The GPS signal loss fault mask is either on or off. When it is off, the server will
|
|
set the Signal Loss Fault Bit in the Fault Status Byte one hour after TFOM reaches the
|
|
TFOM Fault Level. When the setting is on, the server will not set the Signal Loss
|
|
Fault Bit in the Fault Status Byte one hour or more after TFOM reaches TFOM Fault level."
|
|
::= { gps 52 }
|
|
|
|
gpsPrimaryPowerFaultAlarmMask OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Primary Power input fault alarm mask is either on or off. When it is on,
|
|
the server will not assert an Alarm condition on a fault in the Primary Power supply.
|
|
Unlike other fault masks, the fault condition will continue to be visible in the
|
|
Fault Status Byte. This mask capability is useful when performing system tests when
|
|
only a single power input is available and an alarm would be undesirable. When the
|
|
setting is off, the server will assert an Alarm condition in addition to setting
|
|
the appropriate bit in the Fault Status Byte."
|
|
::= { gps 53 }
|
|
|
|
gpsSecondaryPowerFaultAlarmMask OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Secondary Power input fault alarm mask is either on or off. When it is on,
|
|
the server will not assert an Alarm condition on a fault in the Secondary Power supply.
|
|
Unlike other fault masks, the fault condition will continue to be visible in the
|
|
Fault Status Byte. This mask capability is useful when performing system tests when
|
|
only a single power input is available and an alarm would be undesirable. When the
|
|
setting is off, the server will assert an Alarm condition in addition to setting
|
|
the appropriate bit in the Fault Status Byte."
|
|
::= { gps 54 }
|
|
|
|
gpsTimeFigureOfMeritFaultLevel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
lessthan1us (4),
|
|
lessthan10us (5),
|
|
lessthan100us (6),
|
|
lessthan1ms (7),
|
|
lessthan10ms (8),
|
|
greaterthan10ms (9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Time Figure of Merit (TFOM) Fault Level ranges from 4 to 9 and indicates the
|
|
current threshold TFOM value for setting the Signal Loss Bit in the Fault Status
|
|
byte. During normal locked operation the TFOM is 3 and implies a worst case time
|
|
error of 100 nanoseconds. The factory default TFOM Fault Level is 9.
|
|
|
|
During periods of signal loss, the GPS sub-system will compute an
|
|
extrapolated worst case time error. One hour after the worst case time error
|
|
has reached the value equivalent to a TFOM of TFOM Fault Level, the NTP server
|
|
will cease to send stratum 1 reply packets and an Alarm LED will be energized."
|
|
::= { gps 55 }
|
|
|
|
gpsInhibitOutputsMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
gpsInhibitOutputsModeOFF (0),
|
|
gpsInhibitOutputsModeON (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Inhibit Outputs mode is either on or off. When it is on, the timebase
|
|
will inhibit the timing signal outputs prior to initial lock to the GPS receiver.
|
|
When it is off, all timings outputs will be on at all times, even prior to
|
|
to initial lock."
|
|
::= { gps 56 }
|
|
|
|
gpsAlmanacIonoAlpha0 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the current GPS broadcast ionospheric model
|
|
coefficient alpha0 in floating point notation."
|
|
::= { gps 57 }
|
|
|
|
gpsAlmanacIonoAlpha1 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the current GPS broadcast ionospheric model
|
|
coefficient alpha1 in floating point notation."
|
|
::= { gps 58 }
|
|
|
|
gpsAlmanacIonoAlpha2 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the current GPS broadcast ionospheric model
|
|
coefficient alpha2 in floating point notation."
|
|
::= { gps 59 }
|
|
|
|
gpsAlmanacIonoAlpha3 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the current GPS broadcast ionospheric model
|
|
coefficient alpha3 in floating point notation."
|
|
::= { gps 60 }
|
|
|
|
gpsAlmanacIonoBeta0 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the current GPS broadcast ionospheric model
|
|
coefficient beta0 in floating point notation."
|
|
::= { gps 61 }
|
|
|
|
gpsAlmanacIonoBeta1 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the current GPS broadcast ionospheric model
|
|
coefficient beta1 in floating point notation."
|
|
::= { gps 62 }
|
|
|
|
gpsAlmanacIonoBeta2 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the current GPS broadcast ionospheric model
|
|
coefficient beta2 in floating point notation."
|
|
::= { gps 63 }
|
|
|
|
gpsAlmanacIonoBeta3 OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the current GPS broadcast ionospheric model
|
|
coefficient beta3 in floating point notation."
|
|
::= { gps 64 }
|
|
|
|
gpsAlmanacIonoWNa OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value, WN_a is the GPS Week Number of the almanac containing
|
|
the current set of Ionospheric model coefficients.
|
|
For more detailed information, consult the GPS-ICD-200."
|
|
::= { gps 65 }
|
|
|
|
gpsAlmanacIonotoa OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value, t_oa is the second of the GPS week WN_a of the almanac
|
|
containing the current set of Ionospheric model coefficients.
|
|
For more detailed information, consult the GPS-ICD-200."
|
|
::= { gps 66 }
|
|
|
|
gpsRTICMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
gpsRTICModeOFF (0),
|
|
gpsRTICModeON (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the operating mode of the optional Real-Time Ionospheric
|
|
Correction algorithm, which when On, indicates that the Real-Time Ionospheric
|
|
Correction delay measurements are enabled to be used in the time transfer
|
|
calculations to compensate for the GPS signal delay through the ionosphere.
|
|
When Off, it is not active and the standard GPS broadcast Klobuchar model delay is
|
|
used in the time transfer calculations."
|
|
::= { gps 67 }
|
|
|
|
gpsRTICValid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
gpsRTICValidFALSE (0),
|
|
gpsRTICValidTRUE (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the Validity state of the optional Real-Time Ionospheric
|
|
Correction algorithm, which when True, indicates that the Real-Time Ionospheric
|
|
Correction delay measurements are valid and could be used in the time transfer
|
|
calculations to compensate for the GPS signal delay through the ionosphere.
|
|
When False, they are not valid and the standard GPS broadcast Klobuchar model
|
|
delay must be used in the time transfer calculations.
|
|
|
|
A twenty-four hour period of continuous satellite tracking is required before the
|
|
Real-Time Ionospheric Correction algorithm will set this validity indicator to
|
|
the True state."
|
|
::= { gps 68 }
|
|
|
|
gpsKlobucharEnsembleDelay OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the current ensemble ionospheric delay as calculated
|
|
using the standard GPS broadcast Klobuchar model, in units of nanoseconds, in
|
|
floating point notation."
|
|
::= { gps 69 }
|
|
|
|
gpsRTICEnsembleDelay OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string representing the current ensemble ionospheric delay as calculated
|
|
using the optional Real-Time Ionospheric Correction algorithm, in units of
|
|
nanoseconds, in floating point notation. If the Real-Time Ionospheric
|
|
Correction option is not installed, NOT_INSTALLED is returned."
|
|
::= { gps 70 }
|
|
|
|
gpsFaultNibble0Status OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
gpsFLASHWriteFlt (0),
|
|
gpsFPGACfgFlt (1),
|
|
gpsNoSignalTimeout (2),
|
|
gpsDACNearLimit (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a bit string contained in one character representing the least
|
|
significant nibbles of the GPS fault status word. Unfortunately,
|
|
SNMP numbers the bits in the reverse order, so that the enumerated values
|
|
are backwards from the description contained in the User's Manual for the
|
|
fault status field returned by the gpsstat command. Each bit indicates
|
|
a fault when set. Currently defined fault states encoded in this value:
|
|
|
|
Bit 3: DAC controlling the TCXO is near the high or low limit.
|
|
Bit 2: Time Figure of Merit has been >= TFOM Fault Level for 1 hour.
|
|
Bit 1: Field Programmable Gate Array (FPGA) did not configure properly.
|
|
Bit 0: FLASH memory had a write fault."
|
|
::= { gps 71 }
|
|
|
|
gpsFaultNibble1Status OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
gpsReceiverFlt (0),
|
|
gpsNTPNotPolling (1),
|
|
gpsRefTimeFlt (2),
|
|
gpsReceiverCommFlt (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a bit string contained in one character representing the second
|
|
nibble of the GPS fault status word. Unfortunately, SNMP numbers the bits
|
|
in the reverse order, so that the enumerated values are backwards from the
|
|
description contained in the User's Manual for the fault status field returned
|
|
by the gpsstat command. Each bit indicates a fault when set. Currently
|
|
defined fault states encoded in this value:
|
|
|
|
Bit 3: GPS receiver communication fault.
|
|
Bit 2: GPS reference time fault (fails sanity checks).
|
|
Bit 1: NTP daemon is not polling the GPS reference clock.
|
|
Bit 0: GPS receiver fault."
|
|
::= { gps 72 }
|
|
|
|
gpsFaultNibble2Status OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
gpsAntennaFlt (0),
|
|
gpsOscPLLFlt (1),
|
|
gpsSecPwrSplyFlt (2),
|
|
gpsPriPwrSplyFlt (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a bit string contained in one character representing the third
|
|
nibble of the GPS fault status word. Unfortunately, SNMP numbers the bits
|
|
in the reverse order, so that the enumerated values are backwards from the
|
|
description contained in the User's Manual for the fault status field returned
|
|
by the gpsstat command. Each bit indicates a fault when set. Currently
|
|
defined fault states encoded in this value:
|
|
|
|
Bit 3: Primary Redundant Power Supply is Faulting.
|
|
Bit 2: Secondary Redundant Power Supply is Faulting.
|
|
Bit 1: Oscillator PLL Faulting.
|
|
Bit 0: GPS Antenna or Feedline is Shorted or Open."
|
|
::= { gps 73 }
|
|
|
|
gpsFaultNibble3Status OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
gpsSysPwrOvld (0),
|
|
gpsNotUsed1 (1),
|
|
gpsHP5071a (2),
|
|
gpsPlugInOpts (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a bit string contained in one character representing the
|
|
most significant nibble of the GPS fault status word. Unfortunately,
|
|
SNMP numbers the bits in the reverse order, so that the enumerated values
|
|
are backwards from the description contained in the User's Manual for the
|
|
fault status field returned by the gpsstat command. Each bit indicates
|
|
a fault when set. Currently defined fault states encoded in this value:
|
|
|
|
Bit 3: Plug-In Option Fault.
|
|
Bit 2: HP5071A Cesium Option Fault.
|
|
Bit 1: Not Used.
|
|
Bit 0: Installed System Power Exceeds Maximum."
|
|
::= { gps 74 }
|
|
|
|
gpsHP5071AOperNibble0Status OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
csNotUsed0 (0),
|
|
csNotUsed1 (1),
|
|
csNotUsed2 (2),
|
|
csCalibrating (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a bit string contained in one character representing the least
|
|
significant nibble of the optional HP5071A Cesium Operation status word.
|
|
Unfortunately, SNMP numbers the bits in the reverse order, so that the
|
|
enumerated values are backwards from the description contained in the HP5071A
|
|
User's Manual for the Operation status register. Each bit indicates a state
|
|
when set.
|
|
|
|
NOTE: If no bits are set in this OID and the gpsHP5071AOperNibble2Status
|
|
and gpsHP5071AOperNibble3Status OIDs, that is an indication of an RS-232
|
|
communications fault with the HP5071A.
|
|
|
|
Currently defined states encoded in this value:
|
|
|
|
Bit 3: HP5071A is in Calibrating State.
|
|
Bit 2: Not Used.
|
|
Bit 1: Not Used.
|
|
Bit 0: Not Used."
|
|
::= { gps 75 }
|
|
|
|
gpsHP5071AOperNibble2Status OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
csFatal (0),
|
|
csNormal (1),
|
|
csOnBattery (2),
|
|
csStandby (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a bit string contained in one character representing the third
|
|
nibble of the optional HP5071A Cesium Operation status word. Unfortunately,
|
|
SNMP numbers the bits in the reverse order, so that the enumerated values
|
|
are backwards from the description contained in the HP5071A User's Manual
|
|
for the Operation status register. Each bit indicates an Operation state
|
|
when set.
|
|
|
|
NOTE: If no bits are set in this OID and the gpsHP5071AOperNibble0Status
|
|
and gpsHP5071AOperNible3Status OIDs, that is an indication of an RS-232
|
|
communications fault with the HP5071A.
|
|
|
|
Currently defined states encoded in this value:
|
|
|
|
Bit 3: HP5071A is operating in Standby mode.
|
|
Bit 2: HP5071A is operating on Battery power.
|
|
Bit 1: HP5071A is operating Normally.
|
|
Bit 0: HP5071A has a Fatal error."
|
|
::= { gps 76 }
|
|
|
|
gpsHP5071AOperNibble3Status OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
csNotUsed0 (0),
|
|
csNotUsed1 (1),
|
|
csNotUsed2 (2),
|
|
csSteered (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a bit string contained in one character representing the most
|
|
significant nibble of the optional HP5071A Cesium Operation status word.
|
|
Unfortunately, SNMP numbers the bits in the reverse order, so that the
|
|
enumerated values are backwards from the description contained in the HP5071A
|
|
User's Manual for the Operation status register. Each bit indicates an
|
|
Operation state when set.
|
|
|
|
NOTE: If no bits are set in this OID and the gpsHP5071AOperNibble0Status
|
|
and gpsHP5071AOperNibble2Status OIDs, that is an indication of an RS-232
|
|
communications fault with the HP5071A.
|
|
|
|
Currently defined states encoded in this value:
|
|
|
|
Bit 3: HP5071A is operating with Steered frequency.
|
|
Bit 2: Not Used.
|
|
Bit 1: Not Used.
|
|
Bit 0: Not Used."
|
|
::= { gps 77 }
|
|
|
|
gpsHP5071AQuesNibble0Data OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
csNotUsed0 (0),
|
|
csTime (1),
|
|
csNotUsed2 (2),
|
|
csNotUsed3 (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a bit string contained in one character representing the least
|
|
significant nibble of the optional HP5071A Cesium Questionable Data word.
|
|
Unfortunately, SNMP numbers the bits in the reverse order, so that the
|
|
enumerated values are backwards from the description contained in the
|
|
HP5071A User's Manual for the Questionable status register. Each bit
|
|
indicates a Questionable state when set. Currently defined states encoded
|
|
in this value:
|
|
|
|
Bit 3: Not Used.
|
|
Bit 2: Not Used.
|
|
Bit 1: HP5071A Time-of-Day Clock has not been set.
|
|
Bit 0: Not Used."
|
|
::= { gps 78 }
|
|
|
|
gpsHP5071AQuesNibble1Data OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
csNotUsed0 (0),
|
|
csPhase (1),
|
|
csFrequency (2),
|
|
csNotUsed3 (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a bit string contained in one character representing the second
|
|
nibble of the optional HP5071A Cesium Questionable Data word. Unfortunately,
|
|
SNMP numbers the bits in the reverse order, so that the enumerated values are
|
|
backwards from the description contained in the HP5071A User's Manual for the
|
|
Questionable status register. Each bit indicates a Questionable state when set.
|
|
Currently defined states encoded in this value:
|
|
|
|
Bit 3: Not Used.
|
|
Bit 2: HP5071A Frequency is unlocked.
|
|
Bit 1: HP5071A Phase has perturbations.
|
|
Bit 0: Not Used."
|
|
::= { gps 79 }
|
|
|
|
gpsHP5071ACsBeamI OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the Cesium Beam current in uA. It may be NOT
|
|
INSTALLED if the HP5071A Cesium oscillator option is not installed."
|
|
::= { gps 80 }
|
|
|
|
gpsHP5071ACFieldI OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the Cesium C-Field current in mA, typical range
|
|
is 10.0 to 14.05 mA. It may be NOT INSTALLED if the HP5071A Cesium
|
|
oscillator option is not installed."
|
|
::= { gps 81 }
|
|
|
|
gpsHP5071AIonPumpI OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the Cesium Ion Pump current in uA, typical range
|
|
is 0 to 40 uA. It may be NOT INSTALLED if the HP5071A Cesium oscillator
|
|
option is not installed."
|
|
::= { gps 82 }
|
|
|
|
gpsHP5071AEMultiplierV OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the Cesium Electron-Multiplier voltage, typical
|
|
range is 1000 to 2553 V. It may be NOT INSTALLED if the HP5071A Cesium
|
|
oscillator option is not installed."
|
|
::= { gps 83 }
|
|
|
|
gpsHP5071ACsOvenV OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the Cesium Oven voltage, typical range is 0 to 10V.
|
|
It may be NOT INSTALLED if the HP5071A Cesium oscillator option is not
|
|
installed."
|
|
::= { gps 84 }
|
|
|
|
gpsHP5071ASignalGainPerCent OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the Cesium Signal Gain in percent of maximum,
|
|
typical range is 14.4 to 58 %. It may be NOT INSTALLED if the HP5071A
|
|
Cesium oscillator option is not installed."
|
|
::= { gps 85 }
|
|
|
|
gpsHP5071ARFAmplitude1PerCent OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the Cesium microwave RF Amplitude 1 in percent of
|
|
maximum, typical range is 0 to 100 %. It may be NOT INSTALLED if the
|
|
HP5071A Cesium oscillator option is not installed."
|
|
::= { gps 86 }
|
|
|
|
gpsHP5071ARFAmplitude2PerCent OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the Cesium microwave RF Amplitude 2 in percent of
|
|
maximum, typical range is 0 to 100 %. It may be NOT INSTALLED if the
|
|
HP5071A Cesium oscillator option is not installed."
|
|
::= { gps 87 }
|
|
|
|
gpsHP5071AOscillatorOvenV OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the Reference Oscillator Oven voltage, typical
|
|
range is -5 to -10 V. It may be NOT INSTALLED if the HP5071A Cesium
|
|
oscillator option is not installed."
|
|
::= { gps 88 }
|
|
|
|
gpsHP5071AOscillatorControlPerCent OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the Reference Oscillator Control in percent of
|
|
maximum, typical range is -95 to +95 %. It may be NOT INSTALLED if the
|
|
HP5071A Cesium oscillator option is not installed."
|
|
::= { gps 89 }
|
|
|
|
-- gCPUIO branch of the Meridian2 GPS subtree
|
|
|
|
gsysio1PPSWidth OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the status of the Settable PulseWidth, 1PPS Output,
|
|
system-wide I/O signal. It may be NOT INSTALLED, or a string showing the current
|
|
pulsewidth setting."
|
|
::= { gCPUIO 1 }
|
|
|
|
gsysioTimeCodeFormat OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the status of the Selectable Format, Time Code
|
|
Output, system-wide I/O signal. It may be NOT INSTALLED, or a string showing
|
|
the current time code output format setting."
|
|
::= { gCPUIO 2 }
|
|
|
|
gsysioSynthesizerHz OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer showing the current frequency setting of the 1 Hz resolution, Direct
|
|
Digital Synthesizer (DDS) Output, system-wide I/O signal. If this option is
|
|
not installed the value is -1, otherwise the value ranges from 0 to 10000000 Hz."
|
|
::= { gCPUIO 3 }
|
|
|
|
gsysioSerialTimeOutputBaudrate OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the Baudrate of the Serial Time Output, system-wide
|
|
I/O signal. It may be NOT INSTALLED, or a string showing one of 4800,
|
|
9600, 19200 or 57600."
|
|
::= { gCPUIO 4 }
|
|
|
|
gsysioSerialTimeOutputFormat OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the Format of the Serial Time Output, system-wide
|
|
I/O signal. It may be NOT INSTALLED, or a string showing one of SYSPLEX,
|
|
TRUETIME, NENA0, NENA1, NENA8, ENDRUN, ENDRUNX or NMEA."
|
|
::= { gCPUIO 5 }
|
|
|
|
gsysioSerialTimeOutputParity OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the Parity of the Serial Time Output, system-wide
|
|
I/O signal. It may be NOT INSTALLED, or a string showing one of ODD,
|
|
EVEN or NONE."
|
|
::= { gCPUIO 6 }
|
|
|
|
gsysioSerialTimeNMEASentence1 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the first NMEA sentence selected for output from
|
|
the Serial Time Output, system-wide I/O signal. This sentence is only
|
|
output from the Meridian2 when the Serial Time Output Format is set
|
|
to NMEA. It may be NOT INSTALLED, or a string showing one of GGA, GLL,
|
|
GSA, GSV1, GSV2, RMC, VTG, ZDA or NONE."
|
|
::= { gCPUIO 7 }
|
|
|
|
gsysioSerialTimeNMEASentence2 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the second NMEA sentence selected for output from
|
|
the Serial Time Output, system-wide I/O signal. This sentence is only
|
|
output from the Meridian2 when the Serial Time Output Format is set
|
|
to NMEA. It may be NOT INSTALLED, or a string showing one of GGA, GLL,
|
|
GSA, GSV1, GSV2, RMC, VTG, ZDA or NONE."
|
|
::= { gCPUIO 8 }
|
|
|
|
gsysioSerialTimeNMEASentence3 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the third NMEA sentence selected for output from
|
|
the Serial Time Output, system-wide I/O signal. This sentence is only
|
|
output from the Meridian2 when the Serial Time Output Format is set
|
|
to NMEA. It may be NOT INSTALLED, or a string showing one of GGA, GLL,
|
|
GSA, GSV1, GSV2, RMC, VTG, ZDA or NONE."
|
|
::= { gCPUIO 9 }
|
|
|
|
gcpuioConnA OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the status of the CPU I/O Connector A.
|
|
It may be NOT INSTALLED, or a string showing the current I/O selection."
|
|
::= { gCPUIO 10 }
|
|
|
|
gcpuioConnB OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the status of the CPU I/O Connector B.
|
|
It may be NOT INSTALLED, or a string showing the current I/O selection."
|
|
::= { gCPUIO 11 }
|
|
|
|
gcpuioConnC OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string showing the status of the CPU I/O Connector C.
|
|
It may be NOT INSTALLED, or a string showing the current I/O selection."
|
|
::= { gCPUIO 12 }
|
|
|
|
-- gPlugInOptions branch of the Meridian2 GPS subtree
|
|
|
|
goptSlot1Desc OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the Plug-In Option that is installed in
|
|
this slot, or NOT INSTALLED if no Plug-In is detected. It includes the
|
|
part number and serial number of any detected Plug-In."
|
|
::= { goptSlot1 1 }
|
|
|
|
goptSlot1A OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port A on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot1 2 }
|
|
|
|
goptSlot1B OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port B on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot1 3 }
|
|
|
|
goptSlot1C OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port C on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot1 4}
|
|
|
|
goptSlot1D OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port D on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot1 5 }
|
|
|
|
goptSlot1E OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port E on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot1 6}
|
|
|
|
goptSlot1F OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port F on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot1 7 }
|
|
|
|
goptSlot2Desc OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the Plug-In Option that is installed in
|
|
this slot, or NOT INSTALLED if no Plug-In is detected. It includes the
|
|
part number and serial number of any detected Plug-In."
|
|
::= { goptSlot2 1 }
|
|
|
|
goptSlot2A OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port A on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot2 2 }
|
|
|
|
goptSlot2B OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port B on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot2 3 }
|
|
|
|
goptSlot2C OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port C on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot2 4}
|
|
|
|
goptSlot2D OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port D on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot2 5 }
|
|
|
|
goptSlot2E OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port E on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot2 6}
|
|
|
|
goptSlot2F OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port F on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot2 7 }
|
|
|
|
goptSlot3Desc OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the Plug-In Option that is installed in
|
|
this slot, or NOT INSTALLED if no Plug-In is detected. It includes the
|
|
part number and serial number of any detected Plug-In."
|
|
::= { goptSlot3 1 }
|
|
|
|
goptSlot3A OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port A on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot3 2 }
|
|
|
|
goptSlot3B OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port B on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot3 3 }
|
|
|
|
goptSlot3C OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port C on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot3 4}
|
|
|
|
goptSlot3D OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port D on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot3 5 }
|
|
|
|
goptSlot3E OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port E on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot3 6}
|
|
|
|
goptSlot3F OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port F on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot3 7 }
|
|
|
|
goptSlot4Desc OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the Plug-In Option that is installed in
|
|
this slot, or NOT INSTALLED if no Plug-In is detected. It includes the
|
|
part number and serial number of any detected Plug-In."
|
|
::= { goptSlot4 1 }
|
|
|
|
goptSlot4A OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port A on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot4 2 }
|
|
|
|
goptSlot4B OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port C on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot4 3 }
|
|
|
|
goptSlot4C OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port C on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot4 4}
|
|
|
|
goptSlot4D OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port D on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot4 5 }
|
|
|
|
goptSlot4E OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port E on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot4 6}
|
|
|
|
goptSlot4F OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port F on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot4 7 }
|
|
|
|
goptSlot5Desc OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the Plug-In Option that is installed in
|
|
this slot, or NOT INSTALLED if no Plug-In is detected. It includes the
|
|
part number and serial number of any detected Plug-In."
|
|
::= { goptSlot5 1 }
|
|
|
|
goptSlot5A OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port A on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot5 2 }
|
|
|
|
goptSlot5B OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port B on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot5 3 }
|
|
|
|
goptSlot5C OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port C on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot5 4}
|
|
|
|
goptSlot5D OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port D on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot5 5 }
|
|
|
|
goptSlot5E OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port E on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot5 6}
|
|
|
|
goptSlot5F OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..80))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ASCII string that describes the current setting for BNC I/O Port F on
|
|
the Plug-In Option in this slot."
|
|
::= { goptSlot5 7 }
|
|
|
|
-- ptp branch of the Meridian2 GPS subtree
|
|
|
|
gptp0Version OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the Version of the Precise Time Protocol, which is 2."
|
|
::= { gptp0 1 }
|
|
|
|
gptp0SyncInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
msec8 (-7),
|
|
msec16 (-6),
|
|
msec31 (-5),
|
|
msec63 (-4),
|
|
msec125 (-3),
|
|
msec250 (-2),
|
|
msec500 (-1),
|
|
sec1 (0)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the log base 2 of the PTP Sync Interval in
|
|
seconds. Values range from -7 to 0, which covers the range from
|
|
1/128 to 1 second."
|
|
::= { gptp0 2 }
|
|
|
|
gptp0AnnounceInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
sec1 (0),
|
|
sec2 (1),
|
|
sec4 (2),
|
|
sec8 (3),
|
|
sec16 (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the log base 2 of the PTP Announce Interval in
|
|
seconds. Values range from 0 to 4, which covers the range from
|
|
1 to 16 seconds."
|
|
::= { gptp0 3 }
|
|
|
|
gptp0Priority1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the PTP Priority1 parameter. It ranges from 0 to 255."
|
|
::= { gptp0 4 }
|
|
|
|
gptp0Priority2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the PTP Priority2 parameter. It ranges from 0 to 255."
|
|
::= { gptp0 5 }
|
|
|
|
gptp0DelayMechanism OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
e2e (0),
|
|
p2p (1),
|
|
disabled (254)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the PTP Delay Mechanism, one of E2E, P2P or disabled."
|
|
::= { gptp0 6 }
|
|
|
|
gptp0Domain OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the PTP Domain parameter. It ranges from 0 to 255."
|
|
::= { gptp0 7}
|
|
|
|
gptp0TimeMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
utc (0),
|
|
ptp (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the PTP Time Mode, one of UTC or PTP."
|
|
::= { gptp0 8 }
|
|
|
|
gptp0TTL OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the PTP multicast Time-To-Live parameter. It ranges from 1 to 255."
|
|
::= { gptp0 9 }
|
|
|
|
gptp0ClockClass OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
lockedPTP (6),
|
|
holdoverPTP (7),
|
|
lockedARB (13),
|
|
holdoverARB (14),
|
|
unlockedPTP (52),
|
|
unlockedARB (58)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the PTP Clock Class, one of Locked, Holdover or Unlocked
|
|
on either the PTP or arbitrary, i.e. UTC time scale."
|
|
::= { gptp0 10 }
|
|
|
|
gptp0TimeScale OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
arb (0),
|
|
ptp (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the PTP Time Scale, one of ARB or PTP.
|
|
When operating in other than PTP Time Mode, this value is
|
|
always ARB, arbitrary."
|
|
::= { gptp0 11 }
|
|
|
|
gptp0PortState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
init (1),
|
|
faulty (2),
|
|
disabled (3),
|
|
listening (4),
|
|
preMaster (5),
|
|
master (6),
|
|
passive (7),
|
|
unCalibrated (8),
|
|
slave (9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the PTP Port State, one of Initializing, Faulty,
|
|
Disabled, Listening, PreMaster, Master, Passive, Uncalibrated or
|
|
Slave."
|
|
::= { gptp0 12 }
|
|
|
|
gptp0TimeSource OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
atom (16),
|
|
gps (32),
|
|
radio (48),
|
|
ptp (64),
|
|
ntp (80),
|
|
hand (96),
|
|
other (144),
|
|
oscillator (160)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the PTP Time Source, one of Atom, GPS, Radio, PTP,
|
|
NTP, Hand, Other or Oscillator."
|
|
::= { gptp0 13 }
|
|
|
|
gptp0UTCOffset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the UTC offset from Atomic Time in seconds.
|
|
It is currently 35 seconds."
|
|
::= { gptp0 14 }
|
|
|
|
gptp0UTCOffsetValid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false (0),
|
|
true (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the validity of the UTC offset from Atomic Time in seconds.
|
|
It is either False or True."
|
|
::= { gptp0 15 }
|
|
|
|
gptp0ClockAccuracy OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
nsec25 (32),
|
|
nsec100 (33),
|
|
nsec250 (34),
|
|
nsec1000 (35),
|
|
nsec2500 (36),
|
|
usec10 (37),
|
|
usec25 (38),
|
|
usec100 (39),
|
|
usec250 (40),
|
|
usec1000 (41),
|
|
usec2500 (42),
|
|
msec10 (43),
|
|
unknown (254)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the PTP Clock Accuracy, with values ranging from
|
|
25 nanoseconds to Unknown."
|
|
::= { gptp0 16 }
|
|
|
|
gptp0Leap59 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false (0),
|
|
true (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the state of the Leap 59 second indicator, which when True,
|
|
indicates that a UTC leap second deletion event is imminent.
|
|
It is either False or True."
|
|
::= { gptp0 17 }
|
|
|
|
gptp0Leap61 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false (0),
|
|
true (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the state of the Leap 61 second indicator, which when True,
|
|
indicates that a UTC leap second insertion event is imminent.
|
|
It is either False or True."
|
|
::= { gptp0 18 }
|
|
|
|
gptp0TimeTraceable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false (0),
|
|
true (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the state of the PTP Time Traceable indicator, which when True,
|
|
indicates that the time of the PTP synchronization messages is traceable to the
|
|
designated time scale. It is either False or True."
|
|
::= { gptp0 19 }
|
|
|
|
gptp0FreqTraceable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false (0),
|
|
true (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the state of the PTP Frequency Traceable indicator, which when True,
|
|
indicates that the frequency of the PTP synchronization messages is traceable to the
|
|
designated time scale. It is either False or True."
|
|
::= { gptp0 20 }
|
|
|
|
gptp1Version OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the Version of the Precise Time Protocol, which is 2."
|
|
::= { gptp1 1 }
|
|
|
|
gptp1SyncInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
msec8 (-7),
|
|
msec16 (-6),
|
|
msec31 (-5),
|
|
msec63 (-4),
|
|
msec125 (-3),
|
|
msec250 (-2),
|
|
msec500 (-1),
|
|
sec1 (0)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the log base 2 of the PTP Sync Interval in
|
|
seconds. Values range from -7 to 0, which covers the range from
|
|
1/128 to 1 second."
|
|
::= { gptp1 2 }
|
|
|
|
gptp1AnnounceInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
sec1 (0),
|
|
sec2 (1),
|
|
sec4 (2),
|
|
sec8 (3),
|
|
sec16 (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the log base 2 of the PTP Announce Interval in
|
|
seconds. Values range from 0 to 4, which covers the range from
|
|
1 to 16 seconds."
|
|
::= { gptp1 3 }
|
|
|
|
gptp1Priority1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the PTP Priority1 parameter. It ranges from 0 to 255."
|
|
::= { gptp1 4 }
|
|
|
|
gptp1Priority2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the PTP Priority2 parameter. It ranges from 0 to 255."
|
|
::= { gptp1 5 }
|
|
|
|
gptp1DelayMechanism OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
e2e (0),
|
|
p2p (1),
|
|
disabled (254)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the PTP Delay Mechanism, one of E2E, P2P or disabled."
|
|
::= { gptp1 6 }
|
|
|
|
gptp1Domain OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the PTP Domain parameter. It ranges from 0 to 255."
|
|
::= { gptp1 7}
|
|
|
|
gptp1TimeMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
utc (0),
|
|
ptp (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the PTP Time Mode, one of UTC or PTP."
|
|
::= { gptp1 8 }
|
|
|
|
gptp1TTL OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the PTP multicast Time-To-Live parameter. It ranges from 1 to 255."
|
|
::= { gptp1 9 }
|
|
|
|
gptp1ClockClass OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
lockedPTP (6),
|
|
holdoverPTP (7),
|
|
lockedARB (13),
|
|
holdoverARB (14),
|
|
unlockedPTP (52),
|
|
unlockedARB (58)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the PTP Clock Class, one of Locked, Holdover or Unlocked
|
|
on either the PTP or arbitrary, i.e. UTC time scale."
|
|
::= { gptp1 10 }
|
|
|
|
gptp1TimeScale OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
arb (0),
|
|
ptp (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the PTP Time Scale, one of ARB or PTP.
|
|
When operating in other than PTP Time Mode, this value is
|
|
always ARB, arbitrary."
|
|
::= { gptp1 11 }
|
|
|
|
gptp1PortState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
init (1),
|
|
faulty (2),
|
|
disabled (3),
|
|
listening (4),
|
|
preMaster (5),
|
|
master (6),
|
|
passive (7),
|
|
unCalibrated (8),
|
|
slave (9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the PTP Port State, one of Initializing, Faulty,
|
|
Disabled, Listening, PreMaster, Master, Passive, Uncalibrated or
|
|
Slave."
|
|
::= { gptp1 12 }
|
|
|
|
gptp1TimeSource OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
atom (16),
|
|
gps (32),
|
|
radio (48),
|
|
ptp (64),
|
|
ntp (80),
|
|
hand (96),
|
|
other (144),
|
|
oscillator (160)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the PTP Time Source, one of Atom, GPS, Radio, PTP,
|
|
NTP, Hand, Other or Oscillator."
|
|
::= { gptp1 13 }
|
|
|
|
gptp1UTCOffset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is the UTC offset from Atomic Time in seconds.
|
|
It is currently 35 seconds."
|
|
::= { gptp1 14 }
|
|
|
|
gptp1UTCOffsetValid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false (0),
|
|
true (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the validity of the UTC offset from Atomic Time in seconds.
|
|
It is either False or True."
|
|
::= { gptp1 15 }
|
|
|
|
gptp1ClockAccuracy OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
nsec25 (32),
|
|
nsec100 (33),
|
|
nsec250 (34),
|
|
nsec1000 (35),
|
|
nsec2500 (36),
|
|
usec10 (37),
|
|
usec25 (38),
|
|
usec100 (39),
|
|
usec250 (40),
|
|
usec1000 (41),
|
|
usec2500 (42),
|
|
msec10 (43),
|
|
unknown (254)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the PTP Clock Accuracy, with values ranging from
|
|
25 nanoseconds to Unknown."
|
|
::= { gptp1 16 }
|
|
|
|
gptp1Leap59 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false (0),
|
|
true (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the state of the Leap 59 second indicator, which when True,
|
|
indicates that a UTC leap second deletion event is imminent.
|
|
It is either False or True."
|
|
::= { gptp1 17 }
|
|
|
|
gptp1Leap61 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false (0),
|
|
true (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the state of the Leap 61 second indicator, which when True,
|
|
indicates that a UTC leap second insertion event is imminent.
|
|
It is either False or True."
|
|
::= { gptp1 18 }
|
|
|
|
gptp1TimeTraceable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false (0),
|
|
true (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the state of the PTP Time Traceable indicator, which when True,
|
|
indicates that the time of the PTP synchronization messages is traceable to the
|
|
designated time scale. It is either False or True."
|
|
::= { gptp1 19 }
|
|
|
|
gptp1FreqTraceable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
false (0),
|
|
true (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value maps to the state of the PTP Frequency Traceable indicator, which when True,
|
|
indicates that the frequency of the PTP synchronization messages is traceable to the
|
|
designated time scale. It is either False or True."
|
|
::= { gptp1 20 }
|
|
|
|
END
|