3340 lines
118 KiB
Plaintext
3340 lines
118 KiB
Plaintext
CTRON-AppleTalk-ROUTER-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- ctron-appletalk-router-mib.txt
|
|
-- Revision: 1.01.00
|
|
-- Part Number:
|
|
-- Date: August 11, 1995
|
|
|
|
|
|
-- Cabletron Systems, Inc.
|
|
-- 35 Industrial Way, P.O. Box 5005
|
|
-- Rochester, NH 03867-0505
|
|
-- (603) 332-9400
|
|
-- support@ctron.com
|
|
|
|
-- This module provides authoritative definitions for Cabletron's
|
|
-- enterprise specific at Routing Services MIB.
|
|
--
|
|
-- This module will be extended, as required.
|
|
--
|
|
|
|
-- Cabletron Systems reserves the right to make changes in
|
|
-- specification and other information contained in this document
|
|
-- without prior notice. The reader should consult Cabletron Systems
|
|
-- to determine whether any such changes have been made.
|
|
--
|
|
-- In no event shall Cabletron Systems be liable for any incidental,
|
|
-- indirect, special, or consequential damages whatsoever (including
|
|
-- but not limited to lost profits) arising out of or related to this
|
|
-- document or the information contained in it, even if Cabletron
|
|
-- Systems has been advised of, known, or should have known, the
|
|
-- possibility of such damages.
|
|
--
|
|
-- Cabletron grants vendors, end-users, and other interested parties
|
|
-- a non-exclusive license to use this Specification in connection
|
|
-- with the management of Cabletron products.
|
|
-- Copyright August 95 Cabletron Systems
|
|
--
|
|
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
DisplayString, PhysAddress
|
|
FROM RFC1213-MIB
|
|
nwRouter, nwRtrProtoSuites
|
|
FROM ROUTER-OIDS
|
|
Counter, TimeTicks, Gauge
|
|
FROM RFC1155-SMI;
|
|
|
|
|
|
|
|
nwRtrExperimental OBJECT IDENTIFIER ::= { nwRouter 4 }
|
|
|
|
|
|
-- The At Router Group.
|
|
|
|
nwAtRouter OBJECT IDENTIFIER ::= { nwRtrProtoSuites 4 }
|
|
|
|
nwAtMibs OBJECT IDENTIFIER ::= { nwAtRouter 1 }
|
|
nwAtComponents OBJECT IDENTIFIER ::= { nwAtRouter 2 }
|
|
|
|
|
|
-- At Router Component Groups
|
|
|
|
nwAtSystem OBJECT IDENTIFIER ::= { nwAtComponents 1 }
|
|
nwAtForwarding OBJECT IDENTIFIER ::= { nwAtComponents 2 }
|
|
nwAtTopology OBJECT IDENTIFIER ::= { nwAtComponents 4 }
|
|
nwAtFib OBJECT IDENTIFIER ::= { nwAtComponents 5 }
|
|
nwAtEndSystems OBJECT IDENTIFIER ::= { nwAtComponents 6 }
|
|
nwAtAccessControl OBJECT IDENTIFIER ::= { nwAtComponents 7 }
|
|
nwAtFilters OBJECT IDENTIFIER ::= { nwAtComponents 8 }
|
|
nwAtRedirector OBJECT IDENTIFIER ::= { nwAtComponents 9 }
|
|
nwAtEvent OBJECT IDENTIFIER ::= { nwAtComponents 10 }
|
|
nwAtWorkGroup OBJECT IDENTIFIER ::= { nwAtComponents 11 }
|
|
nwAtNetDiag OBJECT IDENTIFIER ::= { nwAtComponents 12 }
|
|
|
|
-- At Router System Groups
|
|
|
|
nwAtSysConfig OBJECT IDENTIFIER ::= { nwAtSystem 1 }
|
|
nwAtSysAdministration OBJECT IDENTIFIER ::= { nwAtSystem 2 }
|
|
|
|
-- At Router Forwarding Groups
|
|
|
|
nwAtFwdSystem OBJECT IDENTIFIER ::= { nwAtForwarding 1 }
|
|
nwAtFwdInterfaces OBJECT IDENTIFIER ::= { nwAtForwarding 2 }
|
|
|
|
nwAtFwdCounters OBJECT IDENTIFIER ::= { nwAtFwdSystem 1 }
|
|
nwAtFwdIfConfig OBJECT IDENTIFIER ::= { nwAtFwdInterfaces 1 }
|
|
nwAtFwdIfCounters OBJECT IDENTIFIER ::= { nwAtFwdInterfaces 2 }
|
|
|
|
|
|
-- At Router Routing Groups
|
|
|
|
nwAtDistanceVector OBJECT IDENTIFIER ::= { nwAtTopology 1 }
|
|
nwAtLinkState OBJECT IDENTIFIER ::= { nwAtTopology 2 }
|
|
|
|
nwAtProto OBJECT IDENTIFIER ::= { nwAtDistanceVector 1 }
|
|
nwAtProtoSystem OBJECT IDENTIFIER ::= { nwAtProto 1 }
|
|
nwAtProtoInterface OBJECT IDENTIFIER ::= { nwAtProto 2 }
|
|
|
|
nwAtProtoConfig OBJECT IDENTIFIER ::= { nwAtProtoSystem 1 }
|
|
nwAtProtoCounters OBJECT IDENTIFIER ::= { nwAtProtoSystem 2 }
|
|
|
|
nwAtProtoIfConfig OBJECT IDENTIFIER ::= { nwAtProtoInterface 1 }
|
|
nwAtProtoIfCounters OBJECT IDENTIFIER ::= { nwAtProtoInterface 2 }
|
|
|
|
|
|
-- At Router Host End Systems Groups
|
|
|
|
nwAtHostsSystem OBJECT IDENTIFIER ::= { nwAtEndSystems 1 }
|
|
nwAtHostsInterfaces OBJECT IDENTIFIER ::= { nwAtEndSystems 2 }
|
|
nwAtHostsToMedia OBJECT IDENTIFIER ::= { nwAtEndSystems 3 }
|
|
|
|
-- At Router Access Control Group
|
|
|
|
-- At Router Filters Group
|
|
|
|
-- At Router Redirector Group
|
|
|
|
-- At Router Event Log Group
|
|
|
|
nwAtEventLogConfig OBJECT IDENTIFIER ::= { nwAtEvent 1 }
|
|
nwAtEventLogFilterTable OBJECT IDENTIFIER ::= { nwAtEvent 2 }
|
|
nwAtEventLogTable OBJECT IDENTIFIER ::= { nwAtEvent 3 }
|
|
|
|
-- At Router Work-Group Group
|
|
|
|
|
|
-- AT Network Diagnostic Group
|
|
|
|
nwAtNetDiagPing OBJECT IDENTIFIER ::= { nwAtNetDiag 1 }
|
|
nwAtNetDiagTelnet OBJECT IDENTIFIER ::= { nwAtNetDiag 2 }
|
|
nwAtNetDiagOutbound OBJECT IDENTIFIER ::= { nwAtNetDiag 3 }
|
|
|
|
|
|
AtNetworkNumber ::=
|
|
-- 2 octets of network number in network byte order
|
|
OCTET STRING (SIZE (2))
|
|
|
|
AtDdpNodeAddress ::=
|
|
-- 2 octets of net number in network byte order,
|
|
-- 1 octet of node number
|
|
OCTET STRING (SIZE (3))
|
|
|
|
AtName ::=
|
|
-- 0 to 32 octets of
|
|
-- AppleTalk ASCII [10]
|
|
OCTET STRING (SIZE (0..32))
|
|
|
|
|
|
-- At MIB Group
|
|
-- This group contains information about the revision level of this
|
|
-- MIB within the device. It allows verification of the released
|
|
-- version without having to read other objects.
|
|
|
|
nwAtMibRevText OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of the Cabletron at
|
|
Routing Services MIB in textual format."
|
|
::= { nwAtMibs 1 }
|
|
|
|
|
|
-- At Router System Group
|
|
-- This group contains the objects that pertain to the at routing
|
|
-- services at a global, device-wide level.
|
|
|
|
|
|
-- At System Configuration Group
|
|
-- This group contains the objects that pertain to the setup and
|
|
-- configuration of the At routing services at a global,
|
|
-- device-wide level.
|
|
|
|
nwAtSysRouterId OBJECT-TYPE
|
|
SYNTAX AtNetworkNumber
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The AppleTalk node address used to uniquely identify the
|
|
host (device) running the AppleTalk Routing Services. The
|
|
value of nwAtSysRouterId is equal to the highest AppleTalk
|
|
node address assigned to any router port."
|
|
::= { nwAtSysConfig 1 }
|
|
|
|
-- At System Administration Group
|
|
-- This group contains the objects that pertain to the administration of
|
|
-- At routing services at a global, device-wide level.
|
|
|
|
nwAtSysAdminSTATUS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- shutdown the router
|
|
enabled(3) -- startup the router
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of AppleTalk Routing
|
|
Services system wide. Enabled (3) causes AppleTalk Routing
|
|
Services to become active on all router ports configured
|
|
and enabled for AppleTalk Routing Services. Disabled (2)
|
|
causes AppleTalk Routing Services to become inactive
|
|
system-wide."
|
|
::= { nwAtSysAdministration 1 }
|
|
|
|
nwAtSysOperSTATUS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running,invalid config
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the operating condition of AppleTalk Routing
|
|
Services system- wide. The value of nwAtSysOperStatus
|
|
indicates any problem with your AppleTalk Routing Services
|
|
configuration. A value of 6 indicates that regardless of
|
|
the value of nwAtSysAdminStatus, AppleTalk Routing
|
|
Services is not operating because of an invalid
|
|
configuration."
|
|
::= { nwAtSysAdministration 2 }
|
|
|
|
nwAtSysAdminReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets AppleTalk Routing Services system-wide. Reset (2)
|
|
forces a restart of AppleTalk Routing Services without a
|
|
graceful shutdown on any active router ports and without
|
|
affecting any other routing services."
|
|
::= { nwAtSysAdministration 3 }
|
|
|
|
nwAtSysOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second,
|
|
that nwAtSysOperStatus has been in its current state."
|
|
::= { nwAtSysAdministration 4 }
|
|
|
|
nwAtSysVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of the AppleTalk
|
|
Routing Services firmware, in textual format."
|
|
::= { nwAtSysAdministration 5 }
|
|
|
|
|
|
-- at Forwarding Group
|
|
-- This group contains the managed objects used to setup and configure
|
|
-- the at router ports for packet forwarding as well as the aggregate
|
|
-- and per-interface at packet forwarding counters.
|
|
|
|
|
|
-- at System-wide Packet Forwarding Counters
|
|
-- This group contains the aggregate (device-wide) at packet forwarding
|
|
-- counters. The byte counters include bytes for the network layer on
|
|
-- up, framing is not included.
|
|
|
|
nwAtFwdCtrAdminSTATUS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the aggregate
|
|
(system-wide) AppleTalk packet and byte counters.
|
|
Enabled (3) causes these counters to become active.
|
|
Disabled (2) causes these counters to become inactive."
|
|
::= { nwAtFwdCounters 1 }
|
|
|
|
nwAtFwdCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reset(2) resets the aggregate (system-wide) AppleTalk
|
|
packet and byte counters. Reset (2) resets the AppleTalk
|
|
aggregate counters to 0.nwAtFwdCtrOperationalTime is also
|
|
reset to 0."
|
|
::= { nwAtFwdCounters 2 }
|
|
|
|
nwAtFwdCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second,
|
|
that nwAtFwdCtrAdminStatus has been in the current state."
|
|
::= { nwAtFwdCounters 3 }
|
|
|
|
nwAtFwdCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been received, system-wide, during
|
|
nwAtFwdCtrOperationalTime."
|
|
::= { nwAtFwdCounters 4 }
|
|
|
|
nwAtFwdCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been transmitted, system-wide, during
|
|
nwAtFwdCtrOperationalTime."
|
|
::= { nwAtFwdCounters 5 }
|
|
|
|
nwAtFwdCtrFwdPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been forwarded, system-wide, during
|
|
nwAtFwdCtrOperationalTime."
|
|
::= { nwAtFwdCounters 6 }
|
|
|
|
|
|
nwAtFwdCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been administratively filtered, system-wide, during
|
|
nwAtFwdCtrOperationalTime."
|
|
::= { nwAtFwdCounters 7 }
|
|
|
|
nwAtFwdCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been discarded, system-wide, during
|
|
nwAtFwdCtrOperationalTime."
|
|
::= { nwAtFwdCounters 8 }
|
|
|
|
nwAtFwdCtrAddrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been discarded, system-wide, during
|
|
nwAtFwdCtrOperationalTime because of addressing errors
|
|
in the AppleTalk header."
|
|
::= { nwAtFwdCounters 9 }
|
|
|
|
nwAtFwdCtrLenErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been discarded, system-wide, during
|
|
nwAtFwdCtrOperationalTime, because an invalid packet
|
|
length is contained in the AppleTalk header."
|
|
::= { nwAtFwdCounters 10 }
|
|
|
|
nwAtFwdCtrHdrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of at packets that have been
|
|
discarded, device-wide, during nwAtFwdCtrOperationalTime,
|
|
because of an invalid at header."
|
|
::= { nwAtFwdCounters 11 }
|
|
|
|
nwAtFwdCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
packets that have been received, system-wide, during
|
|
nwAtFwdCtrOperationalTime."
|
|
::= { nwAtFwdCounters 12 }
|
|
|
|
nwAtFwdCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
packets that have been transmitted, system-wide, during
|
|
nwAtFwdCtrOperationalTime."
|
|
::= { nwAtFwdCounters 13 }
|
|
|
|
nwAtFwdCtrFwdBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
packets that have been forwarded, system-wide, during
|
|
nwAtFwdCtrOperationalTime."
|
|
::= { nwAtFwdCounters 14 }
|
|
|
|
|
|
nwAtFwdCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
packets that have been administratively filtered,
|
|
system-wide, during nwAtFwdCtrOperationalTime."
|
|
::= { nwAtFwdCounters 15 }
|
|
|
|
nwAtFwdCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
packets that have been discarded, system wide, during
|
|
nwAtFwdCtrOperationalTime."
|
|
::= { nwAtFwdCounters 16 }
|
|
|
|
nwAtFwdCtrHostInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been successfully delivered to the local host,
|
|
during nwAtFwdCtrOperationalTime."
|
|
::= { nwAtFwdCounters 17 }
|
|
|
|
nwAtFwdCtrHostOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been transmitted by the local host, during
|
|
nwAtFwdCtrOperationalTime."
|
|
::= { nwAtFwdCounters 18 }
|
|
|
|
nwAtFwdCtrHostDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been discarded by the local host, during
|
|
nwAtFwdCtrOperationalTiime, due to a lack of host
|
|
resources."
|
|
::= { nwAtFwdCounters 19 }
|
|
|
|
nwAtFwdCtrHostInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
packets that have been received by the local host, during
|
|
nwAtFwdCtrOperationalTime."
|
|
::= { nwAtFwdCounters 20 }
|
|
|
|
nwAtFwdCtrHostOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
packets that have been transmitted by the local host,
|
|
during nwAtFwdCtrOperationalTime."
|
|
::= { nwAtFwdCounters 21 }
|
|
|
|
nwAtFwdCtrHostDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
packets that have been discarded by the local host,
|
|
during nwAtFwdCtrOperationalTime, due to a lack of host
|
|
resources."
|
|
::= { nwAtFwdCounters 22 }
|
|
|
|
|
|
-- at Forwarding Interface Table
|
|
-- This table contains the managed objects used to set-up and configure
|
|
-- each router port.
|
|
nwAtFwdIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwAtFwdIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port.
|
|
This table is indexed by nwAtFwdIfIndex, which indicates
|
|
the value of MIB 2 ifindex, which identifies the router
|
|
port for which each entry exists."
|
|
::= { nwAtFwdIfConfig 1 }
|
|
|
|
nwAtFwdIfEntry OBJECT-TYPE
|
|
SYNTAX NwAtFwdIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry specifies the AppeTalk Routing Services
|
|
configuration for the router port for which the entry
|
|
exists."
|
|
INDEX { nwAtFwdIfIndex }
|
|
::= { nwAtFwdIfTable 1 }
|
|
|
|
NwAtFwdIfEntry ::=
|
|
SEQUENCE {
|
|
nwAtFwdIfIndex INTEGER,
|
|
nwAtFwdIfAdminSTATUS INTEGER,
|
|
nwAtFwdIfOperSTATUS INTEGER,
|
|
nwAtFwdIfOperationalTime TimeTicks,
|
|
nwAtFwdIfControl INTEGER,
|
|
nwAtFwdIfMtu INTEGER,
|
|
nwAtFwdIfForwarding INTEGER,
|
|
nwAtFwdIfFrameType INTEGER,
|
|
nwAtFwdIfAclIdentifier INTEGER,
|
|
nwAtFwdIfAclSTATUS INTEGER,
|
|
nwAtFwdIfCacheControl INTEGER,
|
|
nwAtFwdIfCacheEntries Counter,
|
|
nwAtFwdIfCacheHits Counter,
|
|
nwAtFwdIfCacheMisses Counter
|
|
}
|
|
|
|
nwAtFwdIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of the MIB 2 ifIndex, which
|
|
identifies the router port for which the entry exists."
|
|
::= { nwAtFwdIfEntry 1 }
|
|
|
|
nwAtFwdIfAdminSTATUS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of AppleTalk Routing
|
|
Services on the router port for which the entry exists.
|
|
Enabled (3) causes AppleTalk Routing Services to become
|
|
active. Disabled (2) causes it to become inactive."
|
|
::= { nwAtFwdIfEntry 2 }
|
|
|
|
nwAtFwdIfOperSTATUS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5), -- start-up in progress
|
|
invalid-config(6) -- not running,invalid config
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of AppleTalk
|
|
Routing Services on the AppleTalk router port for which
|
|
the entry exists. The value of nwAtFwdIfOperStatus
|
|
indicates any problem with the configuration of AppleTalk
|
|
Routing Services on the router port. A value of 6
|
|
indicates that regardless of the state of
|
|
nwAtFwdIfAdminStatus AppleTalk Routing Services is not
|
|
operating because of an invalid port-level configuration."
|
|
::= { nwAtFwdIfEntry 3 }
|
|
|
|
nwAtFwdIfOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second,
|
|
that nwAtFwdIfOper Status has been in its current state."
|
|
::= { nwAtFwdIfEntry 4 }
|
|
|
|
nwAtFwdIfControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
add(2),
|
|
delete(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a
|
|
common object, inherited from the MIB framework used to
|
|
provide a common management interface to all the Cabletron
|
|
Routing Services protocol-specific MIBs. Setting this
|
|
object has no effect."
|
|
::= { nwAtFwdIfEntry 5 }
|
|
|
|
nwAtFwdIfMtu OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Maximum Transmissions Unit (MTU) for
|
|
AppleTalk packets on the router port for which the entry
|
|
exists. This includes the AppleTalk header and data, but
|
|
does not include framing."
|
|
::= { nwAtFwdIfEntry 6 }
|
|
|
|
|
|
nwAtFwdIfForwarding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls forwarding of AppleTalk packets on the
|
|
AppleTalk router port for which the entry exists.
|
|
Enabled (3) causes AppleTalk packets to be forwarded.
|
|
Disabled (2) prevents AppleTalk packets from being
|
|
forwarded."
|
|
::= { nwAtFwdIfEntry 7 }
|
|
|
|
nwAtFwdIfFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER { -- valid media types
|
|
other(1), -- experimental
|
|
ethernet(2), -- ethernet
|
|
snap(3), -- enet,fddi,and token ring
|
|
nativewan(8), -- wan media types
|
|
encapenet(9), -- wan media types
|
|
encapenetsnap(11), -- wan media types
|
|
encapfddisnap(16), -- wan media types
|
|
canonical(17) -- special, tbd
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the framing type for AppleTalk packets forwarded on the
|
|
router port for which the entry exists. Some frame types are only
|
|
valid for specific media types. The comments reflect those valid
|
|
media types."
|
|
DEFVAL { snap }
|
|
::= { nwAtFwdIfEntry 8 }
|
|
|
|
nwAtFwdIfAclIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Access Control ID of the access control
|
|
list in effect for AppleTalk packets being routed on
|
|
the router port for which the entry exists. A value of 0
|
|
indicates that no access control list is in effect."
|
|
::= { nwAtFwdIfEntry 9 }
|
|
|
|
nwAtFwdIfAclSTATUS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of any access control list
|
|
configured for AppleTalk traffic on the router port for
|
|
which the entry exists. Enabled (3) applies the access
|
|
control list indicated by the value of
|
|
nwAtFwdIfAclIdentifier to all AppleTalk traffic being
|
|
routed on the port. Disabled (2) prevents the access
|
|
control list from being applied."
|
|
::= { nwAtFwdIfEntry 10 }
|
|
|
|
nwAtFwdIfCacheControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disable(2),
|
|
enable(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls AppleTalk Address caching on the router port
|
|
for which the entry exists. When AppleTalk Address
|
|
caching is enabled, AppleTalk Addresses used for address
|
|
validation, filtering, and forwarding are stored in the
|
|
cache. This cache is checked first before doing a full
|
|
route table lockup, which speeds up the switching process.
|
|
Enabled (3) turns on AppleTalk Address caching.
|
|
Disabled (2) turns it off."
|
|
::= { nwAtFwdIfEntry 11 }
|
|
|
|
nwAtFwdIfCacheEntries OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of entries in the AppleTalk Address
|
|
cache on the router port for which the entry exists."
|
|
::= { nwAtFwdIfEntry 12 }
|
|
|
|
nwAtFwdIfCacheHits OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of times entries in the AppleTalk
|
|
Address cache have been used to provide the AppleTalk
|
|
address required to validate, filter, or forward an
|
|
AppleTalk packet on the router port."
|
|
::= { nwAtFwdIfEntry 13 }
|
|
|
|
nwAtFwdIfCacheMisses OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of times the AppleTalk Address
|
|
required to validate, filter, or forward an AppleTalk
|
|
packet on the router port was not found in the AppleTalk
|
|
Address cache."
|
|
::= { nwAtFwdIfEntry 14 }
|
|
|
|
|
|
-- The at Interface Address Table
|
|
-- This table contains the managed object used to setup and configure
|
|
-- at addresses on a per router port basis.
|
|
|
|
|
|
|
|
nwAtportTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwAtportEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port
|
|
configured for AppleTalk Routing Services."
|
|
::= { nwAtFwdIfConfig 2 }
|
|
|
|
nwAtportEntry OBJECT-TYPE
|
|
SYNTAX NwAtportEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry specifies the AppleTalk address information
|
|
for the router port for which the entry exists."
|
|
INDEX { nwAtportIndex }
|
|
::= { nwAtportTable 1 }
|
|
|
|
NwAtportEntry ::= SEQUENCE {
|
|
nwAtportIndex INTEGER,
|
|
nwAtportDescr DisplayString,
|
|
nwAtportType INTEGER,
|
|
nwAtportNetStart AtNetworkNumber,
|
|
nwAtportNetEnd AtNetworkNumber,
|
|
nwAtportNetAddress AtDdpNodeAddress,
|
|
nwAtportSTATUS INTEGER,
|
|
nwAtportNetConfig INTEGER,
|
|
nwAtportZoneConfig INTEGER,
|
|
nwAtportZoneDefault AtName,
|
|
nwAtportIfIndex INTEGER,
|
|
nwAtportNetFrom AtDdpNodeAddress,
|
|
nwAtportZoneFrom AtDdpNodeAddress,
|
|
nwAtportInPkts Counter,
|
|
nwAtportOutPkts Counter,
|
|
nwAtportHome INTEGER,
|
|
nwAtportCurrentZone AtName,
|
|
nwAtportConflictPhysAddr OCTET STRING
|
|
}
|
|
|
|
|
|
|
|
nwAtportIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates a unique value for each router port. The value
|
|
of nwAtportIndex is an integer between 1 and the total
|
|
number of ports configured for AppleTalk Routing
|
|
Services."
|
|
::= { nwAtportEntry 1 }
|
|
|
|
nwAtportDescr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This text string provides a description of the port to
|
|
the end-user; it must not contain anything but printable
|
|
ASCII characters."
|
|
::= { nwAtportEntry 2 }
|
|
|
|
-- objects throughout the MIB key off of nwAtportType to determine
|
|
-- the format of address OCTET STRINGs. The address formats
|
|
-- are as follows:
|
|
-- localtalk, ethertalk1, ethertalk2, tokentalk, iptalk,
|
|
-- fdditalk, smdstalk, arctalk, and virtual take the format of
|
|
-- DdpNodeAddress
|
|
-- serialPPP: null OCTET STRING
|
|
-- serialNonstandard: vendor specific
|
|
-- aurp: see AURP MIB to determine format
|
|
-- frameRelay: 32 bit DLCI in network byte order
|
|
-- (OCTET STRING (SIZE (4)))
|
|
-- x25: X121Address (see RFC 1382)
|
|
-- ip: IpAddress (see RFC 1155)
|
|
-- osi: NSAP (OCTET STRING (SIZE (3..20)))
|
|
-- decnetIV: 6 bit area, 10 bit host in network byte order
|
|
-- (OCTET STRING (SIZE (2)))
|
|
-- arap: ???
|
|
-- isdnInThePacketMode: ???
|
|
-- nonAppleTalk3Com: based on ifType
|
|
-- ipx: 32 bit network number in network byte order followed
|
|
-- by datalink address of host
|
|
-- arns: 32 bit ARNS header
|
|
-- hdlc: DdpNodeAddress or null OCTET STRING
|
|
|
|
nwAtportType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
localtalk(2),
|
|
ethertalk1(3),
|
|
ethertalk2(4),
|
|
tokentalk(5),
|
|
iptalk(6),
|
|
serialPPP(7),
|
|
serialNonstandard(8),
|
|
virtual(9), -- an internal interface
|
|
fdditalk(10),
|
|
arctalk(11),
|
|
smdstalk(12),
|
|
aurp(13),
|
|
frameRelay(14),
|
|
x25(15),
|
|
ip(16),
|
|
osi(17),
|
|
decnetIV(18),
|
|
arap(19),
|
|
isdnInThePacketMode(20),
|
|
nonAppleTalk3Com(21),
|
|
ipx(22),
|
|
arns(23),
|
|
hdlc(24)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of nwArPortType indicates which link-layer
|
|
protocol is running immediately below DDP in the protocol
|
|
stack on the router port for which the entry exists. The
|
|
value of nwAtPortType determines the format of address
|
|
octet stings throughout the entire AppleTalk MIB."
|
|
::= { nwAtportEntry 3 }
|
|
|
|
nwAtportNetStart OBJECT-TYPE
|
|
SYNTAX AtNetworkNumber
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The first AppleTalk network address in the network range
|
|
configured for the port. If the port is not a native
|
|
AppleTalk port, this object will have the value of two
|
|
octets of zero. Set this value to the first network
|
|
address in the network range configured for the port."
|
|
::= { nwAtportEntry 4 }
|
|
|
|
nwAtportNetEnd OBJECT-TYPE
|
|
SYNTAX AtNetworkNumber
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The last AppleTalk network address in the network range
|
|
configured for the port. If the network to which this
|
|
AppleTalk port is connected is a non-extended network, or
|
|
if it is not a native AppleTalk port, the value for
|
|
nwAtportNetEnd will be two octets of zero. Set this value
|
|
to the last network address in the network range
|
|
configured for the port."
|
|
::= { nwAtportEntry 5 }
|
|
|
|
nwAtportNetAddress OBJECT-TYPE
|
|
SYNTAX AtDdpNodeAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The AppleTalk node number configured for the port. This
|
|
value may be used as a hint for an initial node number
|
|
used during node-finding. If the port is not a native
|
|
AppleTalk port, this object shall have the value of
|
|
three octets of zero."
|
|
::= { nwAtportEntry 6 }
|
|
|
|
nwAtportSTATUS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
routing(1), -- this port is fully configured and routing
|
|
unconfigured(2),
|
|
off(3),
|
|
invalid(4),
|
|
endNode(5), -- this port is acting as an end node
|
|
offDueToConflict(6), -- port is off due to configuration
|
|
other(7) -- none of the states defined above
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current state of the router port's
|
|
AppleTalk configuration. If either nwAtportNetConfig or
|
|
nwApportZoneConfig are set to (5), conflictAverseSeed,
|
|
and either the configured network number range or zone
|
|
name seeded by the port conflict with the settings of a
|
|
neighbor router, nwApPortStatus will have a value of (6),
|
|
offDueToConflict."
|
|
::= { nwAtportEntry 7 }
|
|
|
|
nwAtportNetConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
conflictOrientedSeed(1),
|
|
garnered(2),
|
|
guessed(3),
|
|
unconfigured(4),
|
|
conflictAverseSeed(5),
|
|
softSeed(6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the network configuration type of the port.
|
|
If the port is not a native AppleTalk port, this object
|
|
will have an unconfigured (4) value."
|
|
::= { nwAtportEntry 8 }
|
|
|
|
nwAtportZoneConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
conflictOrientedSeed(1),
|
|
garnered(2),
|
|
guessed(3),
|
|
unconfigured(4),
|
|
conflictAverseSeed(5),
|
|
softSeed(6)
|
|
}
|
|
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the zone information configuration type of the port. If the port is not a native AppleTalk port, this object will have an unconfigured (4) value."
|
|
::= { nwAtportEntry 9 }
|
|
|
|
nwAtportZoneDefault OBJECT-TYPE
|
|
SYNTAX AtName
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the name of the default zone for the port. If
|
|
the port only has one zone, that zone is represented
|
|
here. If the port is not a native AppleTalk port, this
|
|
object will contain an octet string of zero length."
|
|
::= { nwAtportEntry 10 }
|
|
|
|
nwAtportIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifIndex, which identifies
|
|
the router port for which the entry exists."
|
|
::= { nwAtportEntry 11 }
|
|
|
|
nwAtportNetFrom OBJECT-TYPE
|
|
SYNTAX AtDdpNodeAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When nwAtportNetConfig is set to garnered (2), this
|
|
variable contains the DDP address of the entity from
|
|
which the AppleTalk network number was garnered. When
|
|
nwAtportNetConfig is set to conflictOrientedSeed (1),
|
|
conflictAverseSeed (5), or softSeed (6), this variable
|
|
contains the DDP address of an entity which supplied or
|
|
confirmed the AppleTalk network number. If
|
|
nwAtportNetConfig is set to guessed (3) or
|
|
unconfigured (4), or if the AppleTalk Routing
|
|
Services-enabled device has not received any network
|
|
number confirmation, this object will be set to three
|
|
octets of zero."
|
|
::= { nwAtportEntry 12 }
|
|
|
|
nwAtportZoneFrom OBJECT-TYPE
|
|
SYNTAX AtDdpNodeAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When nwAtportZoneConfig is set to garnered (2), this
|
|
variable contains the DDP address of the entity from
|
|
which the AppleTalk Zone List was garnered. When
|
|
nwAtportZoneConfig is set to conflictOrientedSeed (1),
|
|
conflictAverseSeed (5), or softSeed (6), this variable
|
|
contains the DDP address of an entity which supplied or
|
|
confirmed the AppleTalk zone information. If
|
|
nwAtportZoneConfig is set to guessed (3) or unconfigured
|
|
(4), or if the AppleTalk Routing Services-enabled device
|
|
has not received any zone confirmation, this object will
|
|
be set to three octets of zero."
|
|
::= { nwAtportEntry 13 }
|
|
|
|
nwAtportInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of AppleTalk packets received on the
|
|
port."
|
|
::= { nwAtportEntry 14 }
|
|
|
|
nwAtportOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of AppleTalk packets transmitted on the
|
|
port."
|
|
::= { nwAtportEntry 15 }
|
|
|
|
nwAtportHome OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
home(1),
|
|
notHome(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of nwAtportHome indicates whether or not the
|
|
AppleTalk Routing Services-enabled device, the routing
|
|
entity, is `homed' on the port for which the entry exists.
|
|
If the entity is homed on the port, then it could perform
|
|
NBP (Name Binding Protocol) registrations for services
|
|
that it chooses to advertise."
|
|
::= { nwAtportEntry 16 }
|
|
|
|
-- note that modifications to the following variable do
|
|
-- not affect the nbpTable
|
|
|
|
nwAtportCurrentZone OBJECT-TYPE
|
|
SYNTAX AtName
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the current zone name for the port. In
|
|
general, this is the zone name in which services on the
|
|
port will be registered. If the port is not a native
|
|
AppleTalk port, this object will contain an octet string
|
|
of zero length."
|
|
::= { nwAtportEntry 17 }
|
|
|
|
nwAtportConflictPhysAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the link-layer address of the device which
|
|
caused nwAtportStatus to be set to off (3). If this
|
|
address is not available, or if nwAtportStatus is not
|
|
set to off, this object will be a zero length octet
|
|
string."
|
|
::= { nwAtportEntry 18 }
|
|
|
|
|
|
-- at Forwarding Interfaces Counter Table
|
|
-- This table contains the objects that specify the packet and byte counters
|
|
-- for each configured at router port.
|
|
nwAtFwdIfCtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwAtFwdIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port
|
|
configured and enabled for AppleTalk Routing Services."
|
|
::= { nwAtFwdIfCounters 1 }
|
|
|
|
nwAtFwdIfCtrEntry OBJECT-TYPE
|
|
SYNTAX NwAtFwdIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry indicates the current packet and byte count
|
|
of AppleTalk packets on the router port for which the
|
|
entry exists."
|
|
INDEX { nwAtFwdIfCtrIfIndex }
|
|
::= { nwAtFwdIfCtrTable 1 }
|
|
|
|
NwAtFwdIfCtrEntry ::=
|
|
SEQUENCE {
|
|
nwAtFwdIfCtrIfIndex INTEGER,
|
|
nwAtFwdIfCtrAdminSTATUS INTEGER,
|
|
nwAtFwdIfCtrReset INTEGER,
|
|
nwAtFwdIfCtrOperationalTime TimeTicks,
|
|
nwAtFwdIfCtrInPkts Counter,
|
|
nwAtFwdIfCtrOutPkts Counter,
|
|
nwAtFwdIfCtrFwdPkts Counter,
|
|
nwAtFwdIfCtrFilteredPkts Counter,
|
|
nwAtFwdIfCtrDiscardPkts Counter,
|
|
nwAtFwdIfCtrAddrErrPkts Counter,
|
|
nwAtFwdIfCtrLenErrPkts Counter,
|
|
nwAtFwdIfCtrHdrErrPkts Counter,
|
|
nwAtFwdIfCtrInBytes Counter,
|
|
nwAtFwdIfCtrOutBytes Counter,
|
|
nwAtFwdIfCtrFwdBytes Counter,
|
|
nwAtFwdIfCtrFilteredBytes Counter,
|
|
nwAtFwdIfCtrDiscardBytes Counter,
|
|
nwAtFwdIfCtrHostInPkts Counter,
|
|
nwAtFwdIfCtrHostOutPkts Counter,
|
|
nwAtFwdIfCtrHostDiscardPkts Counter,
|
|
nwAtFwdIfCtrHostInBytes Counter,
|
|
nwAtFwdIfCtrHostOutBytes Counter,
|
|
nwAtFwdIfCtrHostDiscardBytes Counter
|
|
}
|
|
|
|
nwAtFwdIfCtrIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value MIB 2 ifindex, which identifies
|
|
the router port for which the entry exists."
|
|
::= { nwAtFwdIfCtrEntry 1 }
|
|
|
|
nwAtFwdIfCtrAdminSTATUS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the per-port AppleTalk
|
|
packet and byte counters on the router port for which
|
|
the entry exists. Enabled (3) causes these counters to
|
|
become active. Disabled (2) causes these counters to
|
|
become inactive."
|
|
::= { nwAtFwdIfCtrEntry 2 }
|
|
|
|
nwAtFwdIfCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the per-port AppleTalk packet and byte counters
|
|
on the router port for which the entry exists. Reset (2)
|
|
resets the counters to 0. nwAtFwdIfCtrOperationalTime is
|
|
also reset to 0."
|
|
::= { nwAtFwdIfCtrEntry 3 }
|
|
|
|
nwAtFwdIfCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time, in hundredths of a second,
|
|
that nwAtFwdIfCtrAdminStatus has been in the current
|
|
state."
|
|
::= { nwAtFwdIfCtrEntry 4 }
|
|
|
|
nwAtFwdIfCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been received, during nwAtFwdIfCtrOperationaltime,
|
|
on the router port for which the entry exists."
|
|
::= { nwAtFwdIfCtrEntry 5 }
|
|
|
|
nwAtFwdIfCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been transmitted, during nwAtFwdIfCtrOperationaltime,
|
|
on the router port for which the entry exists."
|
|
::= { nwAtFwdIfCtrEntry 6 }
|
|
|
|
nwAtFwdIfCtrFwdPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been forwarded, during nwAtFwdIfCtrOperationaltime,
|
|
on the router port for which the entry exists."
|
|
::= { nwAtFwdIfCtrEntry 7 }
|
|
|
|
nwAtFwdIfCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been administratively filtered, during
|
|
nwAtFwdIfCtrOperationalTime, on the router port for which
|
|
the entry exists."
|
|
::= { nwAtFwdIfCtrEntry 8 }
|
|
|
|
nwAtFwdIfCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been discarded (dropped), during
|
|
nwAtFwdIfCtrOperationalTime, on the router port for which
|
|
the entry exists."
|
|
::= { nwAtFwdIfCtrEntry 9 }
|
|
|
|
nwAtFwdIfCtrAddrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been discarded, because of addressing errors in the
|
|
AppleTalk header, during nwAtFwdIfCtrOperationalTime,
|
|
on the router port for which the entry exists."
|
|
::= { nwAtFwdIfCtrEntry 10 }
|
|
|
|
nwAtFwdIfCtrLenErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been discarded, because an invalid packet length
|
|
was contained in the AppleTalk header, during
|
|
nwAtFwdIfCtrOperationalTime, on the router port for which
|
|
the entry exists."
|
|
::= { nwAtFwdIfCtrEntry 11 }
|
|
|
|
nwAtFwdIfCtrHdrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been discarded, because of an invalid AppleTalk
|
|
header, during nwAtFwdIfCtrOperationalTime, on the router
|
|
port for which the entry exists."
|
|
::= { nwAtFwdIfCtrEntry 12 }
|
|
|
|
nwAtFwdIfCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
packets that have been received, during
|
|
nwAtFwdIfCtrOperationalTime, on the router port for which
|
|
the entry exists."
|
|
::= { nwAtFwdIfCtrEntry 13 }
|
|
|
|
nwAtFwdIfCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
packets that have been transmitted, durin
|
|
nwAtFwdIfCtrOperationalTime, on the router port for which
|
|
the entry exists."
|
|
::= { nwAtFwdIfCtrEntry 14 }
|
|
|
|
nwAtFwdIfCtrFwdBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
packets that have been forwarded, during
|
|
nwAtFwdIfCtrOperationalTime, on the router port for which
|
|
the entry exists."
|
|
::= { nwAtFwdIfCtrEntry 15 }
|
|
|
|
nwAtFwdIfCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
packets that have been administratively filtered, during
|
|
nwAtFwdIfCtrOperationalTime, on the router port for which
|
|
the entry exists."
|
|
::= { nwAtFwdIfCtrEntry 16 }
|
|
|
|
nwAtFwdIfCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
packets that have been discarded, during
|
|
nwAtFwdIfCtrOperationalTime, on the router port for which
|
|
the entry exists."
|
|
::= { nwAtFwdIfCtrEntry 17 }
|
|
|
|
nwAtFwdIfCtrHostInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been successfully delivered to the local host during
|
|
nwAtFwdIfCtrOperationalTime, that were received on the
|
|
router port for which the entry exists."
|
|
::= { nwAtFwdIfCtrEntry 18 }
|
|
|
|
nwAtFwdIfCtrHostOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been transmitted by the local host, during
|
|
nwAtFwdIfCtrOperationalTime, on the router port for which
|
|
the entry exists."
|
|
::= { nwAtFwdIfCtrEntry 19 }
|
|
|
|
nwAtFwdIfCtrHostDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that
|
|
have been discarded by the local host due to a lack of
|
|
host resources during nwAtFwdIfCtrOperationalTime, that
|
|
were received on the router port for which the entry
|
|
exists."
|
|
::= { nwAtFwdIfCtrEntry 20 }
|
|
|
|
nwAtFwdIfCtrHostInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
packets that have been successfully delivered to the
|
|
local host, during nwAtFwdIfCtrOperationalTime, that
|
|
were received on the router port for which the entry
|
|
exists."
|
|
::= { nwAtFwdIfCtrEntry 21 }
|
|
|
|
nwAtFwdIfCtrHostOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
packets that have been transmitted by the local host,
|
|
during nwAtFwdIfCtrOperationalTime, on the router port
|
|
for which the entry exists."
|
|
::= { nwAtFwdIfCtrEntry 22 }
|
|
|
|
nwAtFwdIfCtrHostDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
packets that have been discarded by the local host, due
|
|
to a lack of host resources during
|
|
nwAtFwdIfCtrOperationalTime, that were received on the
|
|
router port for which the entry exists."
|
|
::= { nwAtFwdIfCtrEntry 23 }
|
|
|
|
|
|
-- DistanceVector-based Protocols
|
|
-- This group contains the managed objects for the Appletalk Routing Protocol,
|
|
-- RTMP DistanceVector based routing.
|
|
|
|
-- AppleTalk Proto System Configuration Parameters
|
|
-- This group contains the objects that pertain to the setup and
|
|
-- configuration of the AppleTalk Proto DistanceVector based routing protocol.
|
|
|
|
|
|
|
|
nwAtProtoAdminSTATUS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- shutdown the router
|
|
enabled(3) -- startup the router
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the AppleTalk
|
|
distance-vector based routing protocol system-wide.
|
|
Enabled (3) causes the routing protocol to become active
|
|
on all router ports configured and enabled for AppleTalk
|
|
Routing Services. Disabled (2) causes the routing protocol
|
|
to become inactive."
|
|
::= { nwAtProtoConfig 1 }
|
|
|
|
nwAtProtoOperSTATUS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5) -- start-up in progress
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of the
|
|
AppleTalk Routing Services distance-vector-based routing
|
|
protocol, system-wide. The value of nwAtProtoOperStatus
|
|
indicates any problem with the routing protocol
|
|
configuration. A value of 6 indicates that regardless of
|
|
the value of nwAtProtoAdminStatus, the routing protocol
|
|
is not operating because of an invalid configuration."
|
|
::= { nwAtProtoConfig 2 }
|
|
|
|
nwAtProtoAdminReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
reset(2) -- force a reset
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the routing protocol. Reset (2) forces a
|
|
system-wide restart of the protocol without a graceful
|
|
shutdown on any active router ports."
|
|
::= { nwAtProtoConfig 3 }
|
|
|
|
nwAtProtoOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundredths of a second,
|
|
that nwAtProtoOperStatus has been in the current state."
|
|
::= { nwAtProtoConfig 4 }
|
|
|
|
nwAtProtoVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current revision level of the AppleTalk
|
|
routing protocol firmware, in textual format."
|
|
::= { nwAtProtoConfig 5 }
|
|
|
|
nwAtProtoStackSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the stack size of the AppleTalk routing
|
|
protocol thread. In order for a change of this value to
|
|
take effect, the protocol (nwAtProtoAdminReset),
|
|
AppleTalk Routing Services (nwAtProtoAdminReset), or the
|
|
device running Routing Services must be reset."
|
|
::= { nwAtProtoConfig 6 }
|
|
|
|
nwAtProtoThreadPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the run-time execution priority of the
|
|
AppleTalk routing protocol thread. In order for a change
|
|
of this value to take effect, the AppleTalk protocol
|
|
(nwAtProtoAdminReset), AppleTalk Routing Services
|
|
(nwAtProtoAdminReset), or the device running Routing
|
|
Services must be reset."
|
|
::= { nwAtProtoConfig 7 }
|
|
|
|
nwAtProtoDatabaseThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the run-time maximum number of entries that
|
|
can be held in the AppleTalk routing protocol route
|
|
table."
|
|
::= { nwAtProtoConfig 8 }
|
|
|
|
nwAtProtoAgeOut OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the amount of time (in seconds) an inactive entry
|
|
will be allowed to remain in the AppleTalk routing protocol routing table, before it is deleted, or aged-out."
|
|
::= { nwAtProtoConfig 9 }
|
|
|
|
nwAtProtoHoldDown OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a
|
|
common object, inherited from the MIB framework used to
|
|
provide a common management interface to all the Cabletron
|
|
Routing Services protocol-specific MIBs. Setting this
|
|
object has no effect."
|
|
::= { nwAtProtoConfig 10 }
|
|
|
|
|
|
-- AppleTalk Routing Protocol System (aggregate) Counters
|
|
-- This group contains the aggregate (device-wide) AppleTalk Routing Protocol
|
|
-- packet and byte counters.
|
|
nwAtProtoCtrAdminSTATUS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the aggregate
|
|
(system-wide) AppleTalk routing protocol packet and byte
|
|
counters. Enabled (3)causes these counters to become
|
|
active. Disabled (2) causes these counters to be come
|
|
inactive."
|
|
::= { nwAtProtoCounters 1 }
|
|
|
|
nwAtProtoCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the aggregate (system-wide) AppleTalk
|
|
distance-vector based routing protocol packet and byte
|
|
counters. Reset (2) resets the AppleTalk aggregate
|
|
counters to 0. nwAtProtoCtrOperationalTime is also reset
|
|
to 0."
|
|
::= { nwAtProtoCounters 2 }
|
|
|
|
nwAtProtoCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundreds of seconds, that
|
|
nwAtProtoCtrAdminStatus, has been in the current
|
|
administrative state."
|
|
::= { nwAtProtoCounters 3 }
|
|
|
|
nwAtProtoCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk routing protocol
|
|
packets that have been received, system-wide, during
|
|
nwAtProtoCtrOperationalTime."
|
|
::= { nwAtProtoCounters 4 }
|
|
|
|
nwAtProtoCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk routing protocol
|
|
packets that have been transmitted, system-wide, during
|
|
nwAtProtoCtrOperationalTime."
|
|
::= { nwAtProtoCounters 5 }
|
|
|
|
nwAtProtoCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk routing protocol
|
|
packets that have been administratively filtered,
|
|
system-wide, during nwAtProtoCtrOperationalTime."
|
|
::= { nwAtProtoCounters 6 }
|
|
|
|
nwAtProtoCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk routing protocol
|
|
packets that have been discarded, system-wide, during
|
|
nwAtProtoCtrOperationalTime."
|
|
::= { nwAtProtoCounters 7 }
|
|
|
|
nwAtProtoCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
routing protocol packets that have been received,
|
|
system-wide, during nwAtProtoCtrOperationalTime."
|
|
::= { nwAtProtoCounters 8 }
|
|
|
|
nwAtProtoCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
routing protocol packets that have been transmitted,
|
|
system-wide, during nwAtProtoCtrOperationalTime."
|
|
::= { nwAtProtoCounters 9 }
|
|
|
|
nwAtProtoCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
routing protocol packets that have been administratively
|
|
filtered, system-wide, during
|
|
nwAtProtoCtrOperationalTime."
|
|
::= { nwAtProtoCounters 10 }
|
|
|
|
nwAtProtoCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk
|
|
routing protocol packets that have been discarded,
|
|
system-wide during nwAtProtoCtrOperationalTime."
|
|
::= { nwAtProtoCounters 11 }
|
|
|
|
|
|
-- at Protocol Interface Table
|
|
nwAtProtoIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwAtProtoIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each router port. Each
|
|
entry can contain different values, allowing the routing
|
|
protocol configuration to vary from router port to router
|
|
port. This table is indexed by nwAtProtoIfIndex, which
|
|
indicates the value of MIB 2 ifindex, which identifies
|
|
the router port for which the entry exists."
|
|
::= { nwAtProtoIfConfig 1 }
|
|
|
|
nwAtProtoIfEntry OBJECT-TYPE
|
|
SYNTAX NwAtProtoIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains the AppleTalk routing protocol
|
|
configuration for the router port for which the entry
|
|
exists."
|
|
INDEX { nwAtProtoIfIndex }
|
|
::= { nwAtProtoIfTable 1 }
|
|
|
|
NwAtProtoIfEntry ::=
|
|
SEQUENCE {
|
|
nwAtProtoIfIndex INTEGER,
|
|
nwAtProtoIfAdminSTATUS INTEGER,
|
|
nwAtProtoIfOperSTATUS INTEGER,
|
|
nwAtProtoIfOperationalTime TimeTicks,
|
|
nwAtProtoIfVersion INTEGER,
|
|
nwAtProtoIfAdvertisement INTEGER,
|
|
nwAtProtoIfFloodDelay INTEGER,
|
|
nwAtProtoIfRequestDelay INTEGER,
|
|
nwAtProtoIfPriority INTEGER,
|
|
nwAtProtoIfHelloTimer INTEGER,
|
|
nwAtProtoIfSplitHorizon INTEGER,
|
|
nwAtProtoIfPoisonReverse INTEGER,
|
|
nwAtProtoIfSnooping INTEGER,
|
|
nwAtProtoIfType INTEGER,
|
|
nwAtProtoIfXmitCost INTEGER,
|
|
nwAtProtoIfAclIdentifier INTEGER,
|
|
nwAtProtoIfAclSTATUS INTEGER
|
|
}
|
|
|
|
nwAtProtoIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies
|
|
the router port for which the entry exists."
|
|
::= { nwAtProtoIfEntry 1 }
|
|
|
|
nwAtProtoIfAdminSTATUS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the AppleTalk routing
|
|
protocol on the router port for which the entry exists.
|
|
Enabled (3) causes the routing protocol to become active
|
|
on the router port. Disabled (2) causes it to become
|
|
inactive."
|
|
DEFVAL { disabled }
|
|
::= { nwAtProtoIfEntry 2 }
|
|
|
|
nwAtProtoIfOperSTATUS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5) -- start-up in progress
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of the
|
|
AppleTalk routing protocol on the router port for which
|
|
the entry exists. The value of nwAtProtoIfOperStatus
|
|
indicates any problem with your AppleTalk routing
|
|
protocol configuration on the router port. A value of 6
|
|
indicates that regardless of the value of
|
|
nwAtProtoIfAdminStatus, the routing protocol is not
|
|
operating on the router port because of an invalid
|
|
configuration."
|
|
::= { nwAtProtoIfEntry 3 }
|
|
|
|
nwAtProtoIfOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the elapsed time, in hundreds of seconds, that
|
|
nwAtProtoIfOperStatus has been in the current state."
|
|
::= { nwAtProtoIfEntry 4 }
|
|
|
|
nwAtProtoIfVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the revision level of AppleTalk routing
|
|
protocol firmware on the router port for which the entry
|
|
exists, in textual format."
|
|
::= { nwAtProtoIfEntry 5 }
|
|
|
|
nwAtProtoIfAdvertisement OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This specifies the periodic interval (in seconds) that the
|
|
AppleTalk routing protocol agent will advertise routes on this
|
|
DECnet routing port."
|
|
DEFVAL { 60 }
|
|
::= { nwAtProtoIfEntry 6 }
|
|
|
|
nwAtProtoIfFloodDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a
|
|
common object, inherited from the MIB framework used to
|
|
provide a common management interface to all the
|
|
Cabletron Routing Services protocol specific MIBs.
|
|
Setting this object has no effect"
|
|
::= { nwAtProtoIfEntry 7 }
|
|
|
|
nwAtProtoIfRequestDelay OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a
|
|
common object, inherited from the MIB framework used to
|
|
provide a common management interface to all the Cabletron
|
|
Routing Services protocol specific MIBs. Setting this
|
|
object has no effect."
|
|
::= { nwAtProtoIfEntry 8 }
|
|
|
|
nwAtProtoIfPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the priority of the AppleTalk routing protocol on
|
|
the router port for which the entry exists."
|
|
::= { nwAtProtoIfEntry 9 }
|
|
|
|
nwAtProtoIfHelloTimer OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a
|
|
common object, inherited from the MIB framework used to
|
|
provide a common management interface to all the
|
|
Cabletron Routing Services protocol specific MIBs.
|
|
Setting this object has no effect."
|
|
::= { nwAtProtoIfEntry 10 }
|
|
|
|
nwAtProtoIfSplitHorizon OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the operating condition of Split Horizon on the
|
|
router port for which the entry exists. When Split Horizon
|
|
is enabled, the AppleTalk routing protocol keeps track of
|
|
which router port route information is received on, and
|
|
prevents information about a route form being sent back
|
|
out the same router port it was received on."
|
|
DEFVAL { enabled }
|
|
::= { nwAtProtoIfEntry 11 }
|
|
|
|
nwAtProtoIfPoisonReverse OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the operating condition of Poison Reverse on the
|
|
router port for which the entry exists. When Poison
|
|
Reverse is enabled, the AppleTalk routing protocol
|
|
advertises any downed routes as unreachable during the
|
|
period of time that it must wait before removing the
|
|
route from the route table."
|
|
DEFVAL { disabled }
|
|
::= { nwAtProtoIfEntry 12 }
|
|
|
|
nwAtProtoIfSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of AppleTalk routing protocol
|
|
Snooping on the router port. When AppleTalk routing
|
|
protocol Snooping is enabled, the routing protocol
|
|
operates in passive mode, so that it receives route
|
|
information, builds and maintains a route table, but
|
|
does not advertise or send updates on the router port for
|
|
which the entry exists."
|
|
DEFVAL { disabled }
|
|
::= { nwAtProtoIfEntry 13 }
|
|
|
|
nwAtProtoIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
bma(2),
|
|
nbma(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the directly connected network
|
|
segment does or does not support broadcast media access.
|
|
If broadcast media access is supported, AppleTalk routing
|
|
protocol advertisements are sent out one broadcast packet
|
|
per port. If broadcast media is not supported, AppleTalk
|
|
routing protocol advertisements are sent to each
|
|
neighbor."
|
|
::= { nwAtProtoIfEntry 14 }
|
|
|
|
nwAtProtoIfXmitCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the cost of transmitting a packet on the network
|
|
segment connected to router port for which the entry
|
|
exists."
|
|
::= { nwAtProtoIfEntry 15 }
|
|
|
|
nwAtProtoIfAclIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the Access Control List ID of the access
|
|
control list in effect for AppleTalk routing protocol
|
|
packets on the router port for which the entry exists. A
|
|
value of 0 indicates that there is no access control list
|
|
in effect for AppleTalk routing protocol packets on the
|
|
router port."
|
|
::= { nwAtProtoIfEntry 16 }
|
|
|
|
nwAtProtoIfAclSTATUS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of the access control list
|
|
identified by nwAtProtoIfAclIdentifier. Enabled (3)
|
|
causes the access control list to be applied to all
|
|
AppleTalk routing protocol packet traffic on the router
|
|
port for which the entry exists. Disabled (2) prevents
|
|
the access control list from being applied."
|
|
::= { nwAtProtoIfEntry 17 }
|
|
|
|
|
|
-- AppleTalk Protocol Interface Counters Table
|
|
-- This table contains the managed objects for AppleTalk protocols packet and
|
|
-- byte counter on a per router port basis.
|
|
nwAtProtoIfCtrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwAtProtoIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the AppleTalk packet and byte counters for
|
|
each router port on this device."
|
|
::= { nwAtProtoIfCounters 1 }
|
|
|
|
nwAtProtoIfCtrEntry OBJECT-TYPE
|
|
SYNTAX NwAtProtoIfCtrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry specifies the DECnet Phase IV packet and byte
|
|
counters on a per router port basis."
|
|
INDEX { nwAtProtoIfCtrIfIndex }
|
|
::= { nwAtProtoIfCtrTable 1 }
|
|
|
|
NwAtProtoIfCtrEntry ::=
|
|
SEQUENCE {
|
|
nwAtProtoIfCtrIfIndex INTEGER,
|
|
nwAtProtoIfCtrAdminSTATUS INTEGER,
|
|
nwAtProtoIfCtrReset INTEGER,
|
|
nwAtProtoIfCtrOperationalTime TimeTicks,
|
|
nwAtProtoIfCtrInPkts Counter,
|
|
nwAtProtoIfCtrOutPkts Counter,
|
|
nwAtProtoIfCtrFilteredPkts Counter,
|
|
nwAtProtoIfCtrDiscardPkts Counter,
|
|
nwAtProtoIfCtrInBytes Counter,
|
|
nwAtProtoIfCtrOutBytes Counter,
|
|
nwAtProtoIfCtrFilteredBytes Counter,
|
|
nwAtProtoIfCtrDiscardBytes Counter
|
|
}
|
|
nwAtProtoIfCtrIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary index into the AppleTalk interface counter
|
|
table. This number corresponds to the index into the mib2
|
|
InterfaceTable which describes the router port for which
|
|
the entry exists."
|
|
::= { nwAtProtoIfCtrEntry 1 }
|
|
|
|
nwAtProtoIfCtrAdminSTATUS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the AppleTalk packet and byte
|
|
counters on the router port for which the entry exists.
|
|
enabled(3) causes these counters to become active on the
|
|
configured AppleTalk router port. disabled(2) causes these
|
|
counters to become inactive on the configured AppleTalk router
|
|
port."
|
|
::= { nwAtProtoIfCtrEntry 2 }
|
|
|
|
nwAtProtoIfCtrReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
reset(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Resets the AppleTalk packet and byte counters on the router
|
|
port for which the entry exists. reset (2) resets the
|
|
interface-specific counters to 0.
|
|
nwAtProtoIfCtrOperationalTime is also reset to 0."
|
|
::= { nwAtProtoIfCtrEntry 3 }
|
|
|
|
nwAtProtoIfCtrOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time (No. of time ticks) that the
|
|
interface-specific AppleTalk packet and byte counters have been
|
|
active on the router port for which the entry exists."
|
|
::= { nwAtProtoIfCtrEntry 4 }
|
|
|
|
nwAtProtoIfCtrInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that have been
|
|
received, on the router port for which the entry exists,
|
|
during nwAtProtoIfCtrOperationalTime."
|
|
::= { nwAtProtoIfCtrEntry 5 }
|
|
|
|
nwAtProtoIfCtrOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that have been forwarded, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime."
|
|
::= { nwAtProtoIfCtrEntry 6 }
|
|
|
|
nwAtProtoIfCtrFilteredPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that have been
|
|
administratively filtered, on the router port for which this
|
|
entry exists, during nwAtProtoIfCtrOperationalTime."
|
|
::= { nwAtProtoIfCtrEntry 7 }
|
|
|
|
nwAtProtoIfCtrDiscardPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of AppleTalk packets that have been discarded, on the router port for which the entry exists, during
|
|
nwAtProtoIfCtrOperationalTime."
|
|
::= { nwAtProtoIfCtrEntry 8 }
|
|
nwAtProtoIfCtrInBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk packets that have been received, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime."
|
|
::= { nwAtProtoIfCtrEntry 9 }
|
|
|
|
nwAtProtoIfCtrOutBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk packets that have been forwarded, on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime."
|
|
::= { nwAtProtoIfCtrEntry 10 }
|
|
nwAtProtoIfCtrFilteredBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk packets that have been administratively filtered, that were received on the router port for which the entry exists, during nwAtProtoIfCtrOperationalTime."
|
|
::= { nwAtProtoIfCtrEntry 11 }
|
|
|
|
nwAtProtoIfCtrDiscardBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of bytes in the AppleTalk packets that have been discarded, that were received on the router port for
|
|
which the entry exists, during nwAtIfCtrOperationalTime."
|
|
::= { nwAtProtoIfCtrEntry 12 }
|
|
|
|
|
|
-- at Forward Information Base (FIB) Group
|
|
-- This group contains the managed objects for the forwarding table of the
|
|
-- at router.
|
|
|
|
nwAtFibTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwAtFibEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each route being used
|
|
to forward AppleTalk data packets."
|
|
::= { nwAtFib 1 }
|
|
|
|
nwAtFibEntry OBJECT-TYPE
|
|
SYNTAX NwAtFibEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry in the table describes an AppleTalk route
|
|
to a particular destination."
|
|
INDEX { nwAtFibStartNet }
|
|
::= { nwAtFibTable 1 }
|
|
|
|
NwAtFibEntry ::=
|
|
SEQUENCE {
|
|
nwAtFibStartNet AtNetworkNumber,
|
|
nwAtFibEndNet AtNetworkNumber,
|
|
nwAtFibNextHop AtDdpNodeAddress,
|
|
nwAtFibNextHopIf INTEGER,
|
|
nwAtFibHops INTEGER,
|
|
nwAtFibRouteType INTEGER
|
|
}
|
|
|
|
nwAtFibStartNet OBJECT-TYPE
|
|
SYNTAX AtNetworkNumber
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the start of the network range for the route."
|
|
::= { nwAtFibEntry 1 }
|
|
|
|
nwAtFibEndNet OBJECT-TYPE
|
|
SYNTAX AtNetworkNumber
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the end of the network range for the route."
|
|
::= { nwAtFibEntry 2 }
|
|
|
|
nwAtFibNextHop OBJECT-TYPE
|
|
SYNTAX AtDdpNodeAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the full AppleTalk network address of the
|
|
next hop router for the route. An address of all zeros
|
|
indicates a directly connected net."
|
|
::= { nwAtFibEntry 3 }
|
|
|
|
nwAtFibNextHopIf OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB 2 ifindex, which identifies
|
|
the router port through which the next hop node exists.
|
|
Packets destined for the network specified by the entry
|
|
will be forwarded on this router port."
|
|
::= { nwAtFibEntry 4 }
|
|
|
|
nwAtFibHops OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of hops required to reach the
|
|
destination for which the entry exists. It is considered
|
|
as metric 1."
|
|
::= { nwAtFibEntry 5 }
|
|
|
|
nwAtFibRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
appleTalk(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the type of route (Allows for PPP entries
|
|
later)."
|
|
::= { nwAtFibEntry 6 }
|
|
|
|
|
|
-- at Host End Systems Group
|
|
-- This group contains the managed objects which control the use of the
|
|
-- Address Resolution Protocol (ARP) for mapping host addresses to physical
|
|
-- addresses of each router port ARP cache. Mechanisms are also
|
|
-- provided which allow 'snooping' such that all directly connected
|
|
-- end systems using ARP can be discovered along with their addresses.
|
|
|
|
nwAtHostsTimeToLive OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time (in minutes) that an entry
|
|
can remain in the AARP cache."
|
|
::= { nwAtHostsSystem 1 }
|
|
|
|
nwAtHostsRetryCount OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the maximum number of times AppleTalk Routing
|
|
Services will retry each attempt to resolve a host
|
|
address."
|
|
::= { nwAtHostsSystem 2 }
|
|
|
|
|
|
-- at Host Interfaces Table
|
|
-- This table contains the objects that specify the control information for
|
|
-- maintaining the ARP cache (at Net-to-Media Table).
|
|
|
|
nwAtHostCtlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwAtHostCtlEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the control information for
|
|
maintaining an AARP cache on each router port. Note that
|
|
the cache entries are maintained by theAppleTalk Address
|
|
Resolution Protocol Table of the AppleTalk MIB."
|
|
::= { nwAtHostsInterfaces 1 }
|
|
|
|
nwAtHostCtlEntry OBJECT-TYPE
|
|
SYNTAX NwAtHostCtlEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains the control information for the ARP
|
|
cache on the router port indicated by the value
|
|
nwAtHostCtlIfIndex."
|
|
INDEX { nwAtHostCtlIfIndex }
|
|
::= { nwAtHostCtlTable 1 }
|
|
|
|
|
|
NwAtHostCtlEntry ::=
|
|
SEQUENCE {
|
|
nwAtHostCtlIfIndex INTEGER,
|
|
nwAtHostCtlAdminSTATUS INTEGER,
|
|
nwAtHostCtlOperSTATUS INTEGER,
|
|
nwAtHostCtlOperationalTime TimeTicks,
|
|
nwAtHostCtlProtocol INTEGER,
|
|
nwAtHostCtlSnooping INTEGER,
|
|
nwAtHostCtlProxy INTEGER,
|
|
nwAtHostCtlCacheMax INTEGER,
|
|
nwAtHostCtlCacheSize INTEGER,
|
|
nwAtHostCtlNumStatics Counter,
|
|
nwAtHostCtlNumDynamics Counter,
|
|
nwAtHostCtlCacheHits Counter,
|
|
nwAtHostCtlCacheMisses Counter
|
|
}
|
|
|
|
nwAtHostCtlIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of MIB2 ifindex, which identifies
|
|
the router port for which the entry exists."
|
|
::= { nwAtHostCtlEntry 1 }
|
|
|
|
nwAtHostCtlAdminSTATUS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disable(2),
|
|
enable(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of the AARP cache on the
|
|
router port for which the entry exists. Enabled (3) causes
|
|
AARP caching to become active. Disabled (2) causes AARP
|
|
caching to perform a graceful shutdown."
|
|
::= { nwAtHostCtlEntry 2 }
|
|
|
|
nwAtHostCtlOperSTATUS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
disabled(2), -- not running
|
|
enabled(3), -- running
|
|
pending-disable(4), -- shut-down in progress
|
|
pending-enable(5) -- start-up in progress
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current operating condition of the AARP
|
|
Table on the router port for which the entry exists."
|
|
::= { nwAtHostCtlEntry 3 }
|
|
|
|
nwAtHostCtlOperationalTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the amount of time, in hundredths of a second,
|
|
that nwAtHostCtlOperStatus has been in the current state."
|
|
::= { nwAtHostCtlEntry 4 }
|
|
|
|
nwAtHostCtlProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disable(2),
|
|
enable(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls the operation of the AARP protocol on the
|
|
router port for which the entry exists."
|
|
::= { nwAtHostCtlEntry 5 }
|
|
|
|
nwAtHostCtlSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disable(2),
|
|
enable(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Controls AARP Snooping on the router port for which the
|
|
entry exists. Given the AARP protocol is enabled,
|
|
setting nwAtHostCtlIfSnooping to enabled (3) turns on AARP Snooping.
|
|
When AARP Snooping is enabled the source AppleTalk and physical
|
|
addresses of all AARP packets received on the router port are added to
|
|
the AARP Table."
|
|
::= { nwAtHostCtlEntry 6 }
|
|
|
|
nwAtHostCtlProxy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disable(2),
|
|
enable(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object does not apply to this protocol. It is a
|
|
common object, inherited from the MIB framework used to
|
|
provide a common management interface to all the Cabletron
|
|
Routing Services protocol-specific MIBs. Setting this
|
|
object has no effect."
|
|
::= { nwAtHostCtlEntry 7 }
|
|
|
|
nwAtHostCtlCacheMax OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the maximum number of entry slots the AARP
|
|
cache can consist of. nwAtHostCtlCacheMax cannot be set
|
|
to less than 16. Setting this value does not allocate
|
|
any memory for the cache."
|
|
::= { nwAtHostCtlEntry 8 }
|
|
|
|
|
|
nwAtHostCtlCacheSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current number of entry slots in the AARP
|
|
cache on the router port for which the entry exists. The
|
|
cache automatically resizes to accommodate all entries
|
|
up to the maximum number of entries set by
|
|
nwAtHostCtlCacheMax."
|
|
::= { nwAtHostCtlEntry 9 }
|
|
|
|
nwAtHostCtlNumStatics OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the total number of static entries in the AARP
|
|
cache on the router port for which the entry exists.
|
|
Static entries remain in the cache until they are
|
|
administratively removed."
|
|
::= { nwAtHostCtlEntry 10 }
|
|
|
|
nwAtHostCtlNumDynamics OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of dynamic entries in the AARP
|
|
cache on the router port for which the entry exists.
|
|
Dynamic entries area added and aged out by the AARP
|
|
protocol."
|
|
::= { nwAtHostCtlEntry 11 }
|
|
|
|
nwAtHostCtlCacheHits OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of times an entry in the AARP cache
|
|
has been used to successfully provide the physical address
|
|
required to forward an AppleTalk packet on the router
|
|
port for which the entry exists."
|
|
::= { nwAtHostCtlEntry 12 }
|
|
|
|
nwAtHostCtlCacheMisses OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of times the physical address
|
|
required to forward an AppleTalk packet has not been
|
|
found in the AARP cache on the router port for which the
|
|
entry exists."
|
|
::= { nwAtHostCtlEntry 13 }
|
|
|
|
|
|
-- at Access Control List Table
|
|
-- This table contains the managed objects for the Access Control Lists
|
|
-- within the at Router. Access Control Lists allow configuration of
|
|
-- restricted access to networks and protocols reachable thru the at
|
|
-- Router device. Access Control Lists can be defined with these
|
|
-- objects and then be independently applied to at forwarding router ports.
|
|
|
|
nwAtAclValidEntries OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of valid entries that exist in the
|
|
Access Control List Table."
|
|
::= { nwAtAccessControl 1 }
|
|
|
|
nwAtAclTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwAtAclEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the Access Control List information
|
|
for theAppleTalk protocol. This table contains entries,
|
|
each of which allows packet forwarding between
|
|
source/destination pairs to be permitted or denied. The
|
|
particular list is identified by the access control
|
|
list ID. Each list may contain multiple entries ordered
|
|
by sequence number. When a particular access control list
|
|
is searched, it is searched in sequence number order and
|
|
the first match found ends the search. If no match is
|
|
found, access defaults to permitted."
|
|
::= { nwAtAccessControl 2 }
|
|
|
|
nwAtAclEntry OBJECT-TYPE
|
|
SYNTAX NwAtAclEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains AppleTalk source/destination access
|
|
information."
|
|
INDEX { nwAtAclIdentifier, nwAtAclSequence }
|
|
::= { nwAtAclTable 1 }
|
|
|
|
NwAtAclEntry ::=
|
|
SEQUENCE {
|
|
nwAtAclIdentifier INTEGER,
|
|
nwAtAclSequence INTEGER,
|
|
nwAtAclPermission INTEGER,
|
|
nwAtAclMatches Counter,
|
|
nwAtAclDestZone AtName,
|
|
nwAtAclSrcZone AtName
|
|
}
|
|
|
|
nwAtAclIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary (major) index into the AppleTalk
|
|
access control list table. Essentially, this identifies
|
|
the access control list by a unique identifier (at least 1)
|
|
and is arbitrarily assigned by the user. All entries that
|
|
have the same ID belong to the same access control list."
|
|
::= { nwAtAclEntry 1 }
|
|
|
|
nwAtAclSequence OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the secondary (minor) index into the AppleTalk
|
|
access control list table. This number corresponds to a
|
|
sequence number used to order multiple entries within the
|
|
same access control list."
|
|
::= { nwAtAclEntry 2 }
|
|
|
|
nwAtAclPermission OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
permit(3),
|
|
deny(4),
|
|
permit-bidirectional(5),
|
|
deny-bidirectional(6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies whether access is allowed or denied between
|
|
the source and destination address pairs. Note that
|
|
source and destination are interchangeable when
|
|
bi-directional control is selected. To remove an existing
|
|
entry set invalid (2), and it will disappear after
|
|
reboot."
|
|
::= { nwAtAclEntry 3 }
|
|
|
|
nwAtAclMatches OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the number of matches on this entry that
|
|
have resulted in the access restriction permit/deny
|
|
being applied as part of the forwarding process."
|
|
::= { nwAtAclEntry 4 }
|
|
|
|
nwAtAclDestZone OBJECT-TYPE
|
|
SYNTAX AtName
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the destination zone name used to compare for
|
|
matches on the access control list."
|
|
::= { nwAtAclEntry 5 }
|
|
|
|
nwAtAclSrcZone OBJECT-TYPE
|
|
SYNTAX AtName
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the source zone to be used to compare for
|
|
matches on the access control list."
|
|
::= { nwAtAclEntry 6 }
|
|
|
|
|
|
-- AppleTalk Event Group
|
|
|
|
nwAtEventAdminSTATUS OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the administrative state of AppleTalk event
|
|
logging. Enabled (3) causes the event log to become
|
|
active. Disabled (2) causes the event log to become
|
|
inactive."
|
|
::= { nwAtEventLogConfig 1 }
|
|
|
|
nwAtEventMaxEntries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Sets the maximum number of entries allowed in the event
|
|
log table. When the number of entries reaches the value
|
|
of nwAtEventMaxEntries the first (oldest) entry is deleted
|
|
to allow a new entry to be added."
|
|
::= { nwAtEventLogConfig 2 }
|
|
|
|
nwAtEventTraceAll OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Enabled (3) allows logging of all event types on all
|
|
router ports from all protocols and components. Disabled
|
|
(2) causes the event log filter table to specify which
|
|
events to log."
|
|
::= { nwAtEventLogConfig 3 }
|
|
|
|
|
|
-- Event Log Filter Table
|
|
-- The Event Log Filter Table contains the managed objects used to set-up
|
|
-- and configure log entries.
|
|
|
|
nwAtEventFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwAtEventFilterEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each event filter
|
|
configured for AppleTalk Routing Service's events."
|
|
::= { nwAtEventLogFilterTable 1 }
|
|
|
|
nwAtEventFilterEntry OBJECT-TYPE
|
|
SYNTAX NwAtEventFilterEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry describes an event filter which defines a
|
|
particular type of event to be logged to the event log.
|
|
The value of nwIpEventProtocol indicates the value used
|
|
in either the nwRtgProtocolTable or the nwComponentTable
|
|
Cabletron Routing Services MIB, which indentifies the
|
|
protocol to which the entry exists."
|
|
INDEX { nwAtEventFltrProtocol, nwAtEventFltrIfNum }
|
|
::= { nwAtEventFilterTable 1 }
|
|
|
|
NwAtEventFilterEntry ::=
|
|
SEQUENCE {
|
|
nwAtEventFltrProtocol INTEGER,
|
|
nwAtEventFltrIfNum INTEGER,
|
|
nwAtEventFltrControl INTEGER,
|
|
nwAtEventFltrType INTEGER,
|
|
nwAtEventFltrSeverity INTEGER,
|
|
nwAtEventFltrAction INTEGER
|
|
}
|
|
|
|
nwAtEventFltrProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of the Cabletron Routing Services
|
|
MIB nwRtgProtocolInstance or nwComponentRtgInstance,
|
|
which identifies the protocol involved in the event for
|
|
which the event filter exists."
|
|
::= { nwAtEventFilterEntry 1 }
|
|
|
|
nwAtEventFltrIfNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the router port involved in the event for
|
|
which the event filter exists."
|
|
::= { nwAtEventFilterEntry 2 }
|
|
|
|
nwAtEventFltrControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
delete(2),
|
|
add(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Set this value to 3 to add the entry to the event log
|
|
table. Set this value to 2 to remove the entry from the
|
|
event filter table."
|
|
::= { nwAtEventFilterEntry 3 }
|
|
|
|
nwAtEventFltrType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
misc(1),
|
|
timer(2),
|
|
rcv(4),
|
|
xmit(8),
|
|
event(16),
|
|
error(32)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This 6 bit mask specifies the types of events to be
|
|
logged. By default all 6 bits are set to 1, indicating
|
|
that all types of events are to be logged. Setting any bit
|
|
to 0 removes an event type from this field and prevents
|
|
that type of event from being logged. Setting any bit to 1
|
|
adds an event type to this field and enables that type of
|
|
event to be logged. "
|
|
::= { nwAtEventFilterEntry 4 }
|
|
|
|
nwAtEventFltrSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
highest(1),
|
|
highmed(2),
|
|
highlow(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the level of severity an event must meet in
|
|
order to be logged. Controls the amount of event logging
|
|
by ignoring events of a lower priority than specified by
|
|
this filter value. `Highmed' ignores only events of the
|
|
lowest severity. `Highlow' logs all events highest priority
|
|
through lowest. `Highest' severity causes all events
|
|
except those of the highest severity to be ignored.
|
|
`Highmed' severity is the default setting which causes
|
|
only events of the lowest severity to be ignored.
|
|
`Highlow' severity logs all events, regardless of
|
|
severity."
|
|
::= { nwAtEventFilterEntry 5 }
|
|
|
|
nwAtEventFltrAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
log(1),
|
|
trap(2),
|
|
log-trap(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies how the events are to be logged. Logging to
|
|
the `log' stores the events in the event log table
|
|
(nwIpEventFltrAction). Logging to `trap' sends events
|
|
out through the trap mechanism."
|
|
::= { nwAtEventFilterEntry 6 }
|
|
|
|
-- Event Log Table
|
|
-- The Event Log Table contains the logged events.
|
|
|
|
nwAtEventTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwAtEventEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains an entry for each event that has
|
|
been logged."
|
|
::= { nwAtEventLogTable 1 }
|
|
|
|
nwAtEventEntry OBJECT-TYPE
|
|
SYNTAX NwAtEventEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains the information about an event that
|
|
has been logged to the event table."
|
|
INDEX { nwAtEventNumber }
|
|
::= { nwAtEventTable 1 }
|
|
|
|
NwAtEventEntry ::=
|
|
SEQUENCE {
|
|
nwAtEventNumber INTEGER,
|
|
nwAtEventTime TimeTicks,
|
|
nwAtEventType INTEGER,
|
|
nwAtEventSeverity INTEGER,
|
|
nwAtEventProtocol INTEGER,
|
|
nwAtEventIfNum INTEGER,
|
|
nwAtEventTextString OCTET STRING
|
|
}
|
|
|
|
nwAtEventNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An ordinal value assigned to the event for which the
|
|
log entry exists. nwAtEvnetNumber is assigned so that
|
|
each event in the event log can be uniquely identified by
|
|
the value of nwAtEventNumber."
|
|
::= { nwAtEventEntry 1 }
|
|
|
|
nwAtEventTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the time at which the event was logged to the
|
|
event log"
|
|
::= { nwAtEventEntry 2 }
|
|
|
|
nwAtEventType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
misc(1),
|
|
timer(2),
|
|
rcv(4),
|
|
xmit(8),
|
|
event(16),
|
|
error(32)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the type of event that was logged."
|
|
::= { nwAtEventEntry 3 }
|
|
|
|
nwAtEventSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
highest(1),
|
|
highmed(2),
|
|
highlow(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the severity that was assigned to this event."
|
|
::= { nwAtEventEntry 4 }
|
|
|
|
nwAtEventProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the value of the Cabletron Routing Services
|
|
MIB nwRtgProtocolInstance or nwComponentInstance which
|
|
identifies the protocol or component that was involved in
|
|
the event."
|
|
::= { nwAtEventEntry 5 }
|
|
|
|
nwAtEventIfNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the router port that was involved in the
|
|
event."
|
|
::= { nwAtEventEntry 6 }
|
|
|
|
nwAtEventTextString OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Contains the actual text string that was logged."
|
|
::= { nwAtEventEntry 7 }
|
|
|
|
-- AppleTalk Outbound Diagnostics Group
|
|
|
|
nwAtNetDiagOutboundNetAddress OBJECT-TYPE
|
|
SYNTAX AtDdpNodeAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The AppleTalk Network Address of a node with which the
|
|
diagnostic test will directly correspond."
|
|
::= { nwAtNetDiagOutbound 1 }
|
|
|
|
nwAtNetDiagOutboundPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An integer representing the port through which the
|
|
diagnostic test will broadcast or multicast packets."
|
|
::= { nwAtNetDiagOutbound 2 }
|
|
|
|
nwAtNetDiagOutboundTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An integer representing the number of seconds before a
|
|
diagnostic request will time out."
|
|
::= { nwAtNetDiagOutbound 3 }
|
|
|
|
nwAtNetDiagOutboundRetries OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An integer representing the number of times a request
|
|
will be repeated before failure."
|
|
::= { nwAtNetDiagOutbound 4 }
|
|
|
|
nwAtNetDiagOutboundATEchoType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAction(1),
|
|
sendEchoRequest(2),
|
|
other(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of echo diagnostic function to initiate. Upon
|
|
setting this to send EchoRequest (2), an echo request
|
|
will be initiated and the value will be set to noAction
|
|
(1)."
|
|
::= { nwAtNetDiagOutbound 5 }
|
|
|
|
nwAtNetDiagOutboundATEchoStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(1),
|
|
inProgress(2),
|
|
timeout(3),
|
|
success(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current status of the echo diagnostic."
|
|
::= { nwAtNetDiagOutbound 6 }
|
|
|
|
nwAtNetDiagOutboundNBPEntityObject OBJECT-TYPE
|
|
SYNTAX AtName
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The entity object or wildcard object used in the
|
|
NBP lookup diagnostic."
|
|
::= { nwAtNetDiagOutbound 7 }
|
|
|
|
nwAtNetDiagOutboundNBPEntityType OBJECT-TYPE
|
|
SYNTAX AtName
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The entity type or wildcard type used in the
|
|
NBP lookup diagnostic."
|
|
::= { nwAtNetDiagOutbound 8 }
|
|
|
|
nwAtNetDiagOutboundNBPEntityZone OBJECT-TYPE
|
|
SYNTAX AtName
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The entity zone used in the NBP lookup diagnostic."
|
|
::= { nwAtNetDiagOutbound 9 }
|
|
|
|
nwAtNetDiagOutboundNBPType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAction(1),
|
|
localRequest(2),
|
|
lookupMcast(3),
|
|
lookupBcast(4),
|
|
lookupDirect(5),
|
|
bcastRequestBcast(6),
|
|
bcastRequestDirect(7),
|
|
forwardRequestBcast(8),
|
|
forwardRequestDirect(9),
|
|
other(10)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the type of outbound NBP diagnostic function
|
|
to initiate. Upon setting this value to any value other
|
|
than noAction (1) or other (10), the corresponding request
|
|
will be made and the value will be set to noAction (1)."
|
|
::= { nwAtNetDiagOutbound 10 }
|
|
|
|
nwAtNetDiagOutboundNBPStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(1),
|
|
inProgress(2),
|
|
done(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current status of the outbound NBP
|
|
diagnostic."
|
|
::= { nwAtNetDiagOutbound 11 }
|
|
|
|
nwAtNetDiagOutboundRTMPType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAction(1),
|
|
sendRequest(2),
|
|
bcastRequest(3),
|
|
sendRDRequestSplitHorizon(4),
|
|
bcastRDRequestSplitHorizon(5),
|
|
sendRDRequestFullTable(6),
|
|
bcastRDRequestFullTable(7),
|
|
other(8)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of outbound RTMP diagnostic function to initiate.
|
|
Upon setting this value to a value other than noAction(1)
|
|
or other(8), the corresponding request will be initiated
|
|
and the value will be set to noAction(1)."
|
|
::= { nwAtNetDiagOutbound 12 }
|
|
|
|
nwAtNetDiagOutboundRTMPStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(1),
|
|
inProgress(2),
|
|
done(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current status of the outbound RTMP diagnostic."
|
|
::= { nwAtNetDiagOutbound 13 }
|
|
|
|
nwAtNetDiagOutboundRTMPNetStart OBJECT-TYPE
|
|
SYNTAX AtNetworkNumber
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The start of the network range from the last successful
|
|
outbound RTMP request or route data request."
|
|
::= { nwAtNetDiagOutbound 14 }
|
|
|
|
nwAtNetDiagOutboundRTMPNetEnd OBJECT-TYPE
|
|
SYNTAX AtNetworkNumber
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The end of the network range from the last successful
|
|
outbound RTMP request or route data request."
|
|
::= { nwAtNetDiagOutbound 15 }
|
|
|
|
nwAtNetDiagOutboundZIPType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAction(1),
|
|
sendQuery(2),
|
|
bcastQuery(3),
|
|
sendGetZonesList(4),
|
|
sendGetLocalZones(5),
|
|
sendGetMyZone(6),
|
|
sendGetNetInfo(7),
|
|
bcastGetNetInfo(8),
|
|
other(9)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of outbound ZIP diagnostic function to initiate.
|
|
Upon setting this value to a value other than noAction(1)
|
|
or other(8), the corresponding request will be initiated
|
|
and the value will be set to noAction(1)."
|
|
::= { nwAtNetDiagOutbound 16 }
|
|
|
|
nwAtNetDiagOutboundZIPStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(1),
|
|
queryInProgress(2),
|
|
atpInProgress(3),
|
|
gniInProgress(4),
|
|
done(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current status of the outbound ZIP diagnostic."
|
|
::= { nwAtNetDiagOutbound 17 }
|
|
|
|
nwAtNetDiagOutboundZIPQueryNet OBJECT-TYPE
|
|
SYNTAX AtNetworkNumber
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The start of the network range to send ZIP query for."
|
|
::= { nwAtNetDiagOutbound 18 }
|
|
|
|
nwAtNetDiagOutboundZIPQueryZone OBJECT-TYPE
|
|
SYNTAX AtName
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The first zone from the last successful ZIP query."
|
|
::= { nwAtNetDiagOutbound 19 }
|
|
|
|
nwAtNetDiagOutboundZIPGetNetInfoZone OBJECT-TYPE
|
|
SYNTAX AtName
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The zone name to be used in a ZIP get-net-info request
|
|
diagnostic."
|
|
::= { nwAtNetDiagOutbound 20 }
|
|
|
|
nwAtNetDiagOutboundZIPGetNetInfoNetStart OBJECT-TYPE
|
|
SYNTAX AtNetworkNumber
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The start of the network range from the last successful
|
|
ZIP get-net-info request."
|
|
::= { nwAtNetDiagOutbound 21 }
|
|
|
|
nwAtNetDiagOutboundZIPGetNetInfoNetEnd OBJECT-TYPE
|
|
SYNTAX AtNetworkNumber
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The end of the network range from the last successful
|
|
ZIP get-net-info request."
|
|
::= { nwAtNetDiagOutbound 22 }
|
|
|
|
nwAtNetDiagOutboundZIPGetNetInfoMulticast OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The data-link multicast address from the last successful
|
|
ZIP get-net-info request."
|
|
::= { nwAtNetDiagOutbound 23 }
|
|
|
|
nwAtNetDiagOutboundZIPGetNetInfoDefaultZone OBJECT-TYPE
|
|
SYNTAX AtName
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The default zone name from the last successful
|
|
ZIP get-net-info request."
|
|
::= { nwAtNetDiagOutbound 24 }
|
|
|
|
|
|
-- AppleTalk Experimental Branch
|
|
-- The AppleTalk zone table has been placed under the
|
|
-- experimental branch because it is based on the appletalk
|
|
-- draft mib and shall be deprecated when the draft mib
|
|
-- becomes a standard.
|
|
|
|
|
|
-- The atportZoneTable stores information about the zones
|
|
-- associated with each port. The default zone for each
|
|
-- port is stored in the port's atportZoneDefault variable;
|
|
-- all other zones for the port are listed in this table.
|
|
-- If a port only has one zone, it should be stored in the
|
|
-- port's atportZoneDefault variable, and this table should
|
|
-- be empty.
|
|
|
|
nwAtportZoneTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwAtportZoneEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table of zone information for non-default
|
|
zones on ports."
|
|
::= { nwRtrExperimental 1 }
|
|
|
|
nwAtportZoneEntry OBJECT-TYPE
|
|
SYNTAX NwAtportZoneEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry of zone information for a port."
|
|
INDEX { nwAtportZonePort, nwAtportZoneName }
|
|
::= { nwAtportZoneTable 1 }
|
|
|
|
NwAtportZoneEntry ::= SEQUENCE {
|
|
nwAtportZonePort INTEGER,
|
|
nwAtportZoneName AtName,
|
|
nwAtportZoneStatus INTEGER
|
|
}
|
|
|
|
nwAtportZonePort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An integer representing the port to which this zone belongs.
|
|
The port identified by a particular value of this object
|
|
is the same port as identified by the same value of
|
|
nwAtportIndex."
|
|
::= { nwAtportZoneEntry 1 }
|
|
|
|
nwAtportZoneName OBJECT-TYPE
|
|
SYNTAX AtName
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A zone name configured for the AppleTalk port referred to in
|
|
the corresponding entry of nwAtportZonePort.
|
|
When this value is changed in a router, the router must
|
|
send a zipNotify packet on the associated network."
|
|
::= { nwAtportZoneEntry 2 }
|
|
|
|
nwAtportZoneStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status of this zone entry.
|
|
Setting this object to the value invalid(2) has the
|
|
effect of invalidating the corresponding entry in the
|
|
nwAtportZoneTable. That is, it effectively disassociates
|
|
the mapping identified with said entry. It is an
|
|
implementation-specific matter as to whether the agent
|
|
removes an invalidated entry from the table.
|
|
Accordingly, management stations must be prepared to
|
|
receive from agents tabular information corresponding
|
|
to entries not currently in use. Proper
|
|
interpretation of such entries requires examination
|
|
of the relevant nwAtportZoneStatus object."
|
|
::= { nwAtportZoneEntry 3 }
|
|
|
|
--
|
|
|
|
-- IP Hosts-to-Media Table
|
|
-- This table serves to supplement the MIB-2 Net-To-Media Table. It
|
|
-- supports both non-WAN interfaces and logical WAN interfaces and the
|
|
-- circuits under them. In addition to the ifIndex, AtNetworkNumber, and
|
|
-- PhysAddress mapping, each address translation includes the framing
|
|
-- required to converse with the host, the platform's logical port number,
|
|
-- and the circuit identifier associated with the mapping if applicable.
|
|
|
|
|
|
nwAtHostMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NwAtHostMapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Ip Address translation table used for mapping an IP
|
|
address to physical address, framing, port and circuit
|
|
identifier, if applicable."
|
|
::= { nwAtHostsToMedia 1 }
|
|
|
|
nwAtHostMapEntry OBJECT-TYPE
|
|
SYNTAX NwAtHostMapEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains one AtNetworkNumber to 'physical'
|
|
address equivalence, including a circuit identifier
|
|
if applicable. Also provided is the framing and
|
|
port number required to converse with this host."
|
|
INDEX { nwAtHostMapIfIndex, nwAtHostMapAtAddr }
|
|
::= { nwAtHostMapTable 1 }
|
|
|
|
NwAtHostMapEntry ::=
|
|
SEQUENCE {
|
|
nwAtHostMapIfIndex INTEGER,
|
|
nwAtHostMapAtAddr AtDdpNodeAddress,
|
|
nwAtHostMapPhysAddr PhysAddress,
|
|
nwAtHostMapType INTEGER,
|
|
nwAtHostMapCircuitID INTEGER,
|
|
nwAtHostMapFraming INTEGER,
|
|
nwAtHostMapPortNumber INTEGER
|
|
}
|
|
|
|
nwAtHostMapIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the primary (major) index into the HostMap
|
|
table. This number corresponds to the index into the
|
|
MIB-2 Interfaces Group which describes the IP router
|
|
port for which the entry exists."
|
|
::= { nwAtHostMapEntry 1 }
|
|
|
|
|
|
nwAtHostMapAtAddr OBJECT-TYPE
|
|
SYNTAX AtDdpNodeAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The AtDdpNodeAddress corresponding to the
|
|
media-dependent 'physical' address and circuit
|
|
identifier (if applic)."
|
|
::= { nwAtHostMapEntry 2 }
|
|
|
|
nwAtHostMapPhysAddr OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The media-dependent 'physical' address. The value of
|
|
this object is 0 for entries indicating native-wan(8)
|
|
framing."
|
|
::= { nwAtHostMapEntry 3 }
|
|
|
|
nwAtHostMapType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
dynamic(3),
|
|
static(4),
|
|
inactive(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Setting this object to the value invalid(2) has
|
|
the effect of invalidating the corresponding entry
|
|
in the nwAtHostMapTable. That is, it effectively
|
|
dissasociates the circuit identified with said
|
|
entry from the mapping identified with said entry.
|
|
It is an implementation-specific matter as to
|
|
whether the agent removes an invalidated entry
|
|
from the table. Accordingly, management stations
|
|
must be prepared to receive tabular information
|
|
from agents that corresponds to entries not
|
|
currently in use. Proper interpretation of such
|
|
entries requires examination of the relevant
|
|
nwAtHostMapType object."
|
|
|
|
::= { nwAtHostMapEntry 4 }
|
|
|
|
nwAtHostMapCircuitID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The identifier for the virtual circuit present on the
|
|
interface. On an interface configured for Frame Relay,
|
|
this number is the DLCI for the IP Address at the end of
|
|
the circuit. For non-WAN interfaces, the value of this
|
|
object is zero."
|
|
::= { nwAtHostMapEntry 5 }
|
|
|
|
nwAtHostMapFraming OBJECT-TYPE
|
|
SYNTAX INTEGER { -- valid media types
|
|
other(1), -- experimental
|
|
ethernet(2), -- ethernet
|
|
snap(3), -- enet,fddi,and token ring
|
|
nativewan(8), -- wan media types
|
|
encapenet(9), -- wan media types
|
|
encapenetsnap(11), -- wan media types
|
|
encapfddisnap(16), -- wan media types
|
|
canonical(17) -- special, tbd
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the framing type required to converse with the
|
|
host for which this entry exists."
|
|
::= { nwAtHostMapEntry 6 }
|
|
|
|
nwAtHostMapPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The unique value for the logical port number. It's value
|
|
ranges between 1 and a maximum value which is dependent on
|
|
both the number of interfaces in the system and the number
|
|
of circuits present on interfaces which are of WAN type."
|
|
::= { nwAtHostMapEntry 7 }
|
|
|
|
END
|