david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
main
mibs/MIBS/hp/BLADETYPE2-ACL-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

1322 lines
39 KiB
Plaintext
Raw Permalink Blame History

-- COPYRIGHT NOTICE
-- Copyright (c) Hewlett Packard Company, 2005
-- All rights reserved
--
--
BLADETYPE2-ACL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, IpAddress
FROM SNMPv2-SMI
MacAddress
FROM SNMPv2-TC
hpSwitchBladeType2-Mgmt
FROM HP-SWITCH-PL-MIB
;
acl MODULE-IDENTITY
LAST-UPDATED "200510120000Z" -- 12 October 2005
ORGANIZATION "Hewlett Packard Company"
CONTACT-INFO "customerservice@hp.com"
DESCRIPTION
"The MIB module for the Access Control List configuration
and statistics."
::= { hpSwitchBladeType2-Mgmt 9 }
-- MIB_INSERT_START
-- ----------------------------------------------------------------------------
-- { INSERT: bt2acl
-- ----------------------------------------------------------------------------
acConfig OBJECT IDENTIFIER ::= { acl 1 }
acList OBJECT IDENTIFIER ::= { acConfig 1 }
aclBlock OBJECT IDENTIFIER ::= { acConfig 2 }
aclGroup OBJECT IDENTIFIER ::= { acConfig 3 }
-- ---------------------------------------------------------- --
-- Access Control List (ACL) Configuration
-- ---------------------------------------------------------- --
aclCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of current ACL configuration."
::= { acList 1 }
aclCurCfgEntry OBJECT-TYPE
SYNTAX AclCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current information about a particular ACL configuration entry."
INDEX { aclCurCfgIndex }
::= { aclCurCfgTable 1 }
AclCurCfgEntry ::= SEQUENCE {
aclCurCfgIndex Unsigned32,
aclCurCfgBlock Unsigned32,
aclCurCfgGroup Unsigned32,
aclCurCfgFilterAction INTEGER,
aclCurCfgFilterActionSetCOS INTEGER,
aclCurCfgEthFmt INTEGER,
aclCurCfgTagFmt INTEGER,
aclCurCfgSrcMACAddress MacAddress,
aclCurCfgSrcMACMask MacAddress,
aclCurCfgDstMACAddress MacAddress,
aclCurCfgDstMACMask MacAddress,
aclCurCfgEthernetTypeName INTEGER,
aclCurCfgEthernetTypeValue INTEGER,
aclCurCfgVLanId INTEGER,
aclCurCfgVLanMask INTEGER,
aclCurCfg8021pPriority INTEGER,
aclCurCfgTypeOfService INTEGER,
aclCurCfgProtocol INTEGER,
aclCurCfgSrcIPAddress IpAddress,
aclCurCfgSrcIPMask IpAddress,
aclCurCfgDstIPAddress IpAddress,
aclCurCfgDstIPMask IpAddress,
aclCurCfgSrcPort INTEGER,
aclCurCfgSrcPortMask INTEGER,
aclCurCfgDstPort INTEGER,
aclCurCfgDstPortMask INTEGER,
aclCurCfgTCPFlags BITS,
aclCurCfgTCPFlagsMask BITS,
aclCurCfgEgressPorts OCTET STRING,
aclCurCfgStatistics INTEGER
}
aclCurCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index associated with this ACL entry."
::= { aclCurCfgEntry 1 }
aclCurCfgBlock OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ACL block to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any block."
::= { aclCurCfgEntry 2 }
aclCurCfgGroup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group."
::= { aclCurCfgEntry 3 }
aclCurCfgFilterAction OBJECT-TYPE
SYNTAX INTEGER {
none(0),
permit(1),
deny(2),
setcos(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The action to be performed on a packet that matches the filter
settings of this ACL entry."
::= { aclCurCfgEntry 4 }
aclCurCfgFilterActionSetCOS OBJECT-TYPE
SYNTAX INTEGER {
none(0),
cos0(1),
cos1(2),
cos2(3),
cos3(4),
cos4(5),
cos5(6),
cos6(7),
cos7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value to be used when the action to be performed is setCOS
for this ACL entry."
::= { aclCurCfgEntry 5 }
aclCurCfgEthFmt OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ethernet2(1),
snap(2),
llc(3),
ieee802dot3(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet ethernet format to be filtered."
::= { aclCurCfgEntry 6 }
aclCurCfgTagFmt OBJECT-TYPE
SYNTAX INTEGER {
untagged(1),
tagged(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet tag format to be filtered."
::= { aclCurCfgEntry 7 }
aclCurCfgSrcMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source MAC address to be filtered."
::= { aclCurCfgEntry 9 }
aclCurCfgSrcMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgSrcMACAddress for filtering."
::= { aclCurCfgEntry 10 }
aclCurCfgDstMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination MAC address to be filtered."
::= { aclCurCfgEntry 11 }
aclCurCfgDstMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgDstMACAddress for filtering."
::= { aclCurCfgEntry 12 }
aclCurCfgEthernetTypeName OBJECT-TYPE
SYNTAX INTEGER {
none(0),
arp(1),
ipv4(2),
ipv6(3),
mpls(4),
rarp(5),
any(6),
other(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered."
::= { aclCurCfgEntry 13 }
aclCurCfgEthernetTypeValue OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined value for this object."
::= { aclCurCfgEntry 14 }
aclCurCfgVLanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual LAN identifier to be filtered."
::= { aclCurCfgEntry 15 }
aclCurCfgVLanMask OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to aclCurCfgVLanId for filtering."
::= { aclCurCfgEntry 16 }
aclCurCfg8021pPriority OBJECT-TYPE
SYNTAX INTEGER {
none(0),
priority0(1),
priority1(2),
priority2(3),
priority3(4),
priority4(5),
priority5(6),
priority6(7),
priority7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 802.1p priority to be filtered."
::= { aclCurCfgEntry 17 }
aclCurCfgTypeOfService OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of service to be filtered."
::= { aclCurCfgEntry 18 }
aclCurCfgProtocol OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol to be filtered."
::= { aclCurCfgEntry 19 }
aclCurCfgSrcIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source IP address to be filtered."
::= { aclCurCfgEntry 20 }
aclCurCfgSrcIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgSrcIPAddress for filtering."
::= { aclCurCfgEntry 21 }
aclCurCfgDstIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address to be filtered."
::= { aclCurCfgEntry 22 }
aclCurCfgDstIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgDstIPAddress for filtering."
::= { aclCurCfgEntry 23 }
aclCurCfgSrcPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source TCP/UDP port number to be filtered."
::= { aclCurCfgEntry 24 }
aclCurCfgSrcPortMask OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to aclCurCfgSrcPort for filtering."
::= { aclCurCfgEntry 25 }
aclCurCfgDstPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination TCP/UDP port number to be filtered."
::= { aclCurCfgEntry 26 }
aclCurCfgDstPortMask OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to aclCurCfgDstPort for filtering."
::= { aclCurCfgEntry 27 }
aclCurCfgTCPFlags OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { aclCurCfgEntry 28 }
aclCurCfgTCPFlagsMask OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { aclCurCfgEntry 39 }
aclCurCfgEgressPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
|| ||
|| ||___ port 8
|| |____ port 7
|| . . .
||_________ port 2
|__________ port 1
where x:
1 - the represented port is configured for filtering.
0 - the represented port is not configured for filtering."
::= { aclCurCfgEntry 29 }
aclCurCfgStatistics OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether statistics collection for this ACL is enabled or not."
::= { aclCurCfgEntry 30 }
--
-- New ACL Configuration Table
--
aclNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of new ACL configuration."
::= { acList 2 }
aclNewCfgEntry OBJECT-TYPE
SYNTAX AclNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"New information about a particular ACL configuration."
INDEX { aclNewCfgIndex }
::= { aclNewCfgTable 1 }
AclNewCfgEntry ::= SEQUENCE {
aclNewCfgIndex Unsigned32,
aclNewCfgBlock Unsigned32,
aclNewCfgGroup Unsigned32,
aclNewCfgFilterAction INTEGER,
aclNewCfgFilterActionSetCOS INTEGER,
aclNewCfgEthFmt INTEGER,
aclNewCfgTagFmt INTEGER,
aclNewCfgSrcMACAddress MacAddress,
aclNewCfgSrcMACMask MacAddress,
aclNewCfgDstMACAddress MacAddress,
aclNewCfgDstMACMask MacAddress,
aclNewCfgEthernetTypeName INTEGER,
aclNewCfgEthernetTypeValue INTEGER,
aclNewCfgVLanId INTEGER,
aclNewCfgVLanMask INTEGER,
aclNewCfg8021pPriority INTEGER,
aclNewCfgTypeOfService INTEGER,
aclNewCfgProtocol INTEGER,
aclNewCfgSrcIPAddress IpAddress,
aclNewCfgSrcIPMask IpAddress,
aclNewCfgDstIPAddress IpAddress,
aclNewCfgDstIPMask IpAddress,
aclNewCfgSrcPort INTEGER,
aclNewCfgSrcPortMask INTEGER,
aclNewCfgDstPort INTEGER,
aclNewCfgDstPortMask INTEGER,
aclNewCfgTCPFlags BITS,
aclNewCfgTCPFlagsMask BITS,
aclNewCfgEgressPorts OCTET STRING,
aclNewCfgStatistics INTEGER,
aclNewCfgAddEgressPort Unsigned32,
aclNewCfgRemoveEgressPort Unsigned32,
aclNewCfgDelete INTEGER
}
aclNewCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index associated with this ACL entry."
::= { aclNewCfgEntry 1 }
aclNewCfgBlock OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ACL block to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any block."
::= { aclNewCfgEntry 2 }
aclNewCfgGroup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group."
::= { aclNewCfgEntry 3 }
aclNewCfgFilterAction OBJECT-TYPE
SYNTAX INTEGER {
none(0),
permit(1),
deny(2),
setcos(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to be performed on a packet that matches the filter
settings of this ACL entry."
::= { aclNewCfgEntry 4 }
aclNewCfgFilterActionSetCOS OBJECT-TYPE
SYNTAX INTEGER {
none(0),
cos0(1),
cos1(2),
cos2(3),
cos3(4),
cos4(5),
cos5(6),
cos6(7),
cos7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The COS queue to be used when the action for this ACL entry is
set to SetCOS."
::= { aclNewCfgEntry 5 }
aclNewCfgEthFmt OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ethernet2(1),
snap(2),
llc(3),
ieee802dot3(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The packet ethernet format to be filtered."
::= { aclNewCfgEntry 6 }
aclNewCfgTagFmt OBJECT-TYPE
SYNTAX INTEGER {
none(1),
tagged(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The packet tagging format to be filtered."
::= { aclNewCfgEntry 7 }
aclNewCfgSrcMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff."
::= { aclNewCfgEntry 9 }
aclNewCfgSrcMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgSrcMACAddress
for filtering."
::= { aclNewCfgEntry 10 }
aclNewCfgDstMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff."
::= { aclNewCfgEntry 11 }
aclNewCfgDstMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgDstMACAddress
for filtering."
::= { aclNewCfgEntry 12 }
aclNewCfgEthernetTypeName OBJECT-TYPE
SYNTAX INTEGER {
none(0),
arp(1),
ipv4(2),
ipv6(3),
mpls(4),
rarp(5),
any(6),
other(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7), the value of
the aclNewCfgEthernetTypeValue object is automatically set,
as follows:
aclNewCfgEthernetTypeName aclNewCfgEthernetTypeValue
none(0) 0
arp(1) 2054 (0x0806)
ipv4(2) 2048 (0x0800)
ipv6(3) 34525 (0x86dd)
mpls(4) 34887 (0x8847)
rarp(5) 32821 (0x8035)
any(6) 65535 (0xffff)
"
::= { aclNewCfgEntry 13 }
aclNewCfgEthernetTypeValue OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined value for this object."
::= { aclNewCfgEntry 14 }
aclNewCfgVLanId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The virtual LAN identifier to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgVLanMask object, if not
yet set, will be automatically set to 4095 (0xfff)."
::= { aclNewCfgEntry 15 }
aclNewCfgVLanMask OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask to be applied to aclNewCfgVLanId for filtering."
::= { aclNewCfgEntry 16 }
aclNewCfg8021pPriority OBJECT-TYPE
SYNTAX INTEGER {
none(0),
priority0(1),
priority1(2),
priority2(3),
priority3(4),
priority4(5),
priority5(6),
priority6(7),
priority7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 802.1p priority to be filtered."
::= { aclNewCfgEntry 17 }
aclNewCfgTypeOfService OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of service to be filtered."
::= { aclNewCfgEntry 18 }
aclNewCfgProtocol OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol to be filtered."
::= { aclNewCfgEntry 19 }
aclNewCfgSrcIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255."
::= { aclNewCfgEntry 20 }
aclNewCfgSrcIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgSrcIPAddress
for filtering."
::= { aclNewCfgEntry 21 }
aclNewCfgDstIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.255."
::= { aclNewCfgEntry 22 }
aclNewCfgDstIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgDstIPAddress for filtering."
::= { aclNewCfgEntry 23 }
aclNewCfgSrcPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff)."
::= { aclNewCfgEntry 24 }
aclNewCfgSrcPortMask OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask to be applied to aclNewCfgSrcPort for filtering."
::= { aclNewCfgEntry 25 }
aclNewCfgDstPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff)."
::= { aclNewCfgEntry 26 }
aclNewCfgDstPortMask OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask to be applied to aclNewCfgDstPort for filtering."
::= { aclNewCfgEntry 27 }
aclNewCfgTCPFlags OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP flags to be filtered.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { aclNewCfgEntry 28 }
aclNewCfgTCPFlagsMask OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP flags mask.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
Default value is 0x3f."
::= { aclNewCfgEntry 39 }
aclNewCfgEgressPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
|| ||
|| ||___ port 8
|| |____ port 7
|| . . .
||_________ port 2
|__________ port 1
where x:
1 - the represented port is configured for filtering.
0 - the represented port is not configured for filtering."
::= { aclNewCfgEntry 29 }
aclNewCfgStatistics OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether statistics collection for this ACL is enabled or not."
::= { aclNewCfgEntry 30 }
aclNewCfgAddEgressPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be added to the specified ACL for egress filtering.
A value of zero is always returned when this object is read."
::= { aclNewCfgEntry 31 }
aclNewCfgRemoveEgressPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be removed from the specified ACL. A value of zero
is always returned when this object is read."
::= { aclNewCfgEntry 32 }
aclNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to delete an ACL entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 33 }
-- ---------------------------------------------------------- --
-- ACL Block Configuration
-- ---------------------------------------------------------- --
aclBlockCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclBlockCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of current ACL block configuration."
::= { aclBlock 1 }
aclBlockCurCfgEntry OBJECT-TYPE
SYNTAX AclBlockCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current information about a particular ACL block configuration."
INDEX { aclBlockCurCfgIndex }
::= { aclBlockCurCfgTable 1 }
AclBlockCurCfgEntry ::= SEQUENCE {
aclBlockCurCfgIndex Unsigned32,
aclBlockCurCfgMemberAcls OCTET STRING
}
aclBlockCurCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index associated with this ACL block entry."
::= { aclBlockCurCfgEntry 1 }
aclBlockCurCfgMemberAcls OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL members of this ACL block, presented in bitmap
format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| |____ ACL 7
|| . . .
||_________ ACL 2
|__________ ACL 1
where x:
1 - the represented ACL is a member of the block.
0 - the represented ACL is not a member of the block."
::= { aclBlockCurCfgEntry 2 }
aclBlockNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclBlockNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of new ACL block configuration."
::= { aclBlock 2 }
aclBlockNewCfgEntry OBJECT-TYPE
SYNTAX AclBlockNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"New information about a particular ACL block configuration."
INDEX { aclBlockNewCfgIndex }
::= { aclBlockNewCfgTable 1 }
AclBlockNewCfgEntry ::= SEQUENCE {
aclBlockNewCfgIndex Unsigned32,
aclBlockNewCfgMemberAcls OCTET STRING,
aclBlockNewCfgAddAcl Unsigned32,
aclBlockNewCfgRemoveAcl Unsigned32,
aclBlockNewCfgDelete INTEGER
}
aclBlockNewCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index associated with this ACL block entry."
::= { aclBlockNewCfgEntry 1 }
aclBlockNewCfgMemberAcls OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL members of this ACL block, presented in bitmap
format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| |____ ACL 7
|| . . .
||_________ ACL 2
|__________ ACL 1
where x:
1 - the represented ACL is a member of the block.
0 - the represented ACL is not a member of the block."
::= { aclBlockNewCfgEntry 2 }
aclBlockNewCfgAddAcl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the ACL entry to be added into this ACL block.
A successful set operation on this object will also set the bit
corresponding to the ACL entry in the aclBlockNewCfgMemberAcls
bitmap. A value of zero is always returned when this object
is read."
::= { aclBlockNewCfgEntry 3 }
aclBlockNewCfgRemoveAcl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the ACL entry to be removed from this ACL block.
A successful set operation on this object will unset the bit
corresponding to the ACL entry in the aclBlockNewCfgMemberAcls
bitmap. A value of zero is always returned when this object
is read."
::= { aclBlockNewCfgEntry 4 }
aclBlockNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to delete an ACL block. A value of
other(1) is always returned when this object is read."
::= { aclBlockNewCfgEntry 5 }
-- ---------------------------------------------------------- --
-- ACL Group Configuration
-- ---------------------------------------------------------- --
aclGroupCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclGroupCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of current ACL Group configuration."
::= { aclGroup 1 }
aclGroupCurCfgEntry OBJECT-TYPE
SYNTAX AclGroupCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular ACL configuration."
INDEX { aclGroupCurCfgIndex }
::= { aclGroupCurCfgTable 1 }
AclGroupCurCfgEntry ::= SEQUENCE {
aclGroupCurCfgIndex Unsigned32,
aclGroupCurCfgMemberAcls OCTET STRING,
aclGroupCurCfgMemberBlocks OCTET STRING
}
aclGroupCurCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index associated with this ACL Group entry."
::= { aclGroupCurCfgEntry 1 }
aclGroupCurCfgMemberAcls OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL members of this ACL group, presented in bitmap
format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| |____ ACL 7
|| . . .
||_________ ACL 2
|__________ ACL 1
where x:
1 - the represented ACL is a member of the group.
0 - the represented ACL is not a member of the group."
::= { aclGroupCurCfgEntry 2 }
aclGroupCurCfgMemberBlocks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL block members of this ACL group, presented in bitmap
format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL Block 9
|| ||
|| ||___ ACL Block 8
|| |____ ACL Block 7
|| . . . .
||_________ ACL Block 2
|__________ ACL Block 1
where x:
1 - the represented ACL block is a member of the group.
0 - the represented ACL block is not a member of the group."
::= { aclGroupCurCfgEntry 3 }
aclGroupNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclGroupNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of new ACL Group configuration."
::= { aclGroup 2 }
aclGroupNewCfgEntry OBJECT-TYPE
SYNTAX AclGroupNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"New information about a particular ACL configuration."
INDEX { aclGroupNewCfgIndex }
::= { aclGroupNewCfgTable 1 }
AclGroupNewCfgEntry ::= SEQUENCE {
aclGroupNewCfgIndex Unsigned32,
aclGroupNewCfgMemberAcls OCTET STRING,
aclGroupNewCfgMemberBlocks OCTET STRING,
aclGroupNewCfgAddAcl Unsigned32,
aclGroupNewCfgRemoveAcl Unsigned32,
aclGroupNewCfgAddBlock Unsigned32,
aclGroupNewCfgRemoveBlock Unsigned32,
aclGroupNewCfgDelete INTEGER
}
aclGroupNewCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index associated with this ACL Group entry."
::= { aclGroupNewCfgEntry 1 }
aclGroupNewCfgMemberAcls OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL members of this ACL group, presented in bitmap
format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| |____ ACL 7
|| . . .
||_________ ACL 2
|__________ ACL 1
where x:
1 - the represented ACL is a member of the group.
0 - the represented ACL is not a member of the group."
::= { aclGroupNewCfgEntry 2 }
aclGroupNewCfgMemberBlocks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL block members of this ACL group, presented in bitmap
format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL Block 9
|| ||
|| ||___ ACL Block 8
|| |____ ACL Block 7
|| . . . .
||_________ ACL Block 2
|__________ ACL Block 1
where x:
1 - the represented ACL block is a member of the group.
0 - the represented ACL block is not a member of the group."
::= { aclGroupNewCfgEntry 3 }
aclGroupNewCfgAddAcl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the ACL entry to be added into this ACL group.
A successful set operation on this object will also set the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is always returned when this object
is read."
::= { aclGroupNewCfgEntry 4 }
aclGroupNewCfgRemoveAcl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the ACL entry to be removed from this ACL group.
A successful set operation on this object will unset the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is always returned when this object
is read."
::= { aclGroupNewCfgEntry 5 }
aclGroupNewCfgAddBlock OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the ACL block entry to be added into this ACL group.
A successful set operation on this object will also set the bit
corresponding to the ACL block entry in the aclGroupNewCfgMemberBlocks
bitmap. A value of zero is always returned when this object
is read."
::= { aclGroupNewCfgEntry 6 }
aclGroupNewCfgRemoveBlock OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the ACL block entry to be removed from this ACL group.
A successful set operation on this object will unset the bit
corresponding to the ACL block entry in the aclGroupNewCfgMemberBlocks
bitmap. A value of zero is always returned when this object
is read."
::= { aclGroupNewCfgEntry 7 }
aclGroupNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to delete an ACL group. A value of other(1)
is always returned when this object is read."
::= { aclGroupNewCfgEntry 8 }
-- ----------------------------------------------------------------------------
-- } INSERT: bt2acl
-- ----------------------------------------------------------------------------
END
Reference in New Issue View Git Blame Copy Permalink