david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/hp/CPQIDA-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

11130 lines
420 KiB
Plaintext
Raw Permalink Blame History

-- ****************************************************************************
--
-- Intelligent Drive Array
-- Management Information Base for SNMP Network Management
--
--
-- Copyright 1992, 2013 Hewlett-Packard Development Company, L.P.
-- Hewlett-Packard Company shall not be liable for technical or
-- editorial errors or omissions contained herein. The information in
-- this document is provided "as is" without warranty of any kind and
-- is subject to change without notice. The warranties for HP products
-- are set forth in the express limited warranty statements
-- accompanying such products. Nothing herein should be construed as
-- constituting an additional warranty.
--
-- Confidential computer software. Valid license from HP required for
-- possession, use or copying. Consistent with FAR 12.211 and 12.212,
-- Commercial Computer Software, Computer Software Documentation, and
-- Technical Data for Commercial Items are licensed to the U.S.
-- Government under vendor's standard commercial license.
--
-- Refer to the READMIB.RDM file for more information about the
-- organization of the information in the Compaq Enterprise.
--
-- The Compaq Enterprise number is 232.
-- The ASN.1 prefix to, and including the Compaq Enterprise is:
-- 1.3.6.1.4.1.232
--
-- ****************************************************************************
CPQIDA-MIB DEFINITIONS ::= BEGIN
IMPORTS
compaq FROM CPQHOST-MIB
-- enterprises FROM RFC1155-SMI
Counter FROM RFC1155-SMI
Gauge FROM RFC1155-SMI
DisplayString FROM RFC1213-MIB
OBJECT-TYPE FROM RFC-1212
TRAP-TYPE FROM RFC-1215
sysName FROM RFC1213-MIB
cpqHoTrapFlags FROM CPQHOST-MIB;
-- compaq OBJECT IDENTIFIER ::= { enterprises 232 }
cpqDriveArray OBJECT IDENTIFIER ::= { compaq 3 }
cpqDaMibRev OBJECT IDENTIFIER ::= { cpqDriveArray 1 }
cpqDaComponent OBJECT IDENTIFIER ::= { cpqDriveArray 2 }
cpqDaTrap OBJECT IDENTIFIER ::= { cpqDriveArray 3 }
cpqDaInterface OBJECT IDENTIFIER ::= { cpqDaComponent 1 }
cpqDaCntlr OBJECT IDENTIFIER ::= { cpqDaComponent 2 }
cpqDaLogDrv OBJECT IDENTIFIER ::= { cpqDaComponent 3 }
cpqDaSpareDrv OBJECT IDENTIFIER ::= { cpqDaComponent 4 }
cpqDaPhyDrv OBJECT IDENTIFIER ::= { cpqDaComponent 5 }
cpqDaPhyDrvThr OBJECT IDENTIFIER ::= { cpqDaComponent 6 }
cpqDaCntlrPerf OBJECT IDENTIFIER ::= { cpqDaComponent 7 }
cpqDaLogDrvPerf OBJECT IDENTIFIER ::= { cpqDaComponent 8 }
cpqDaTapeDrv OBJECT IDENTIFIER ::= { cpqDaComponent 9 }
cpqDaTapeCounters OBJECT IDENTIFIER ::= { cpqDaComponent 10 }
cpqDaTapeLibrary OBJECT IDENTIFIER ::= { cpqDaComponent 11 }
cpqDaOsNetWare3x OBJECT IDENTIFIER ::= { cpqDaInterface 1 }
cpqDaOsCommon OBJECT IDENTIFIER ::= { cpqDaInterface 4 }
-- ****************************************************************************
-- Drive Array MIB Revision
-- =========================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaMibRev Group (1.3.6.1.4.1.232.3.1)
--
-- An SNMP agent conforming to this document will return a
-- cpqDaMibRevMajor of one (1) and a cpqDaMibRevMinor of
-- fifty-three (53).
--
-- Implementation of the cpqDaMibRev group is mandatory for all agents
-- supporting the Drive Array MIB.
--
-- ****************************************************************************
cpqDaMibRevMajor OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Major Revision level.
A change in the major revision level represents a major change
in the architecture of the MIB. A change in the major revision
level may indicate a significant change in the information
supported and/or the meaning of the supported information,
correct interpretation of data may require a MIB document with
the same major revision level."
::= { cpqDaMibRev 1 }
cpqDaMibRevMinor OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Minor Revision level.
A change in the minor revision level may represent some minor
additional support, no changes to any pre-existing information
has occurred."
::= { cpqDaMibRev 2 }
cpqDaMibCondition OBJECT-TYPE
SYNTAX INTEGER {
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The overall condition (status) of the system represented by
this MIB."
::= { cpqDaMibRev 3 }
-- ****************************************************************************
-- Drive Array NetWare Driver Information
-- ======================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaInterface Group (1.3.6.1.4.1.232.3.2.1)
-- cpqDaOsNetWare3x Group (1.3.6.1.4.1.232.3.2.1.1)
--
-- The osNetWare3x group describes the Drive Array NetWare OS
-- interface. This information describes the driver module and its
-- status.
--
-- Implementation of the cpqDaOsNetWare3x group is mandatory for all
-- agents that support the Drive Array MIB in a NetWare 3x host
-- operating environment.
--
-- ****************************************************************************
cpqDaNw3xDriverName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Array Controller Driver Interface Name.
This is the name of the device driver for the Array
Controllers."
::= { cpqDaOsNetWare3x 1 }
cpqDaNw3xDriverVer OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..5))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Array Controller Driver Interface Version.
This is the version number of the device driver for
the Array Controllers."
::= { cpqDaOsNetWare3x 2 }
cpqDaNw3xPollType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
polled(2),
demand(3)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Array Controller Driver Interface Poll Type.
The Insight Agent collects information from the
device driver in two ways:
Polled (2)
Indicates that the information is periodically requested and
stored by the server based agent and is available when
requested.
Demand (3)
Indicates that the information is collected at the time of
the request."
::= { cpqDaOsNetWare3x 3 }
cpqDaNw3xPollTime OBJECT-TYPE
SYNTAX INTEGER (1..300)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Array Controller Driver Interface Poll Time.
If the Poll Type is Polled, this value shows how frequently,
in seconds, the instrument agent requests Information from
the device driver.
For example, if the Poll Type is Polled and the Poll Time
is two, the instrument agent will poll the device driver
every two seconds.
To change the Poll Time for NetWare, unload and then
reload the instrument agent using the following commands:
UNLOAD CPQDSKSA
LOAD CPQDSKSA [/Un]
The parameter /U specifies the frequency of updates in seconds.
The variable n represents the number of seconds that the NLM
should wait before collecting new data. The minimum value is
one second. The maximum value is 300 seconds (five minutes)."
::= { cpqDaOsNetWare3x 4 }
-- ****************************************************************************
-- Drive Array NetWare Driver Statistics
-- =====================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaInterface Group (1.3.6.1.4.1.232.3.2.1)
-- cpqDaOsNetWare3x Group (1.3.6.1.4.1.232.3.2.1.1)
-- cpqDaNw3xDriverStatTable (1.3.6.1.4.1.232.3.2.1.1.5) (deprecated)
--
-- ****************************************************************************
cpqDaNw3xDriverStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaNw3xDriverStatEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Array Controller Driver Statistics Table.
This is a table of logical drive statistics which are gathered
by the device driver."
::= { cpqDaOsNetWare3x 5 }
cpqDaNw3xDriverStatEntry OBJECT-TYPE
SYNTAX CpqDaNw3xDriverStatEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Array Controller Driver Statistics Table Entry.
One entry in the driver statistics table. Each entry
represents a logical drive for which the statistics are kept."
INDEX { cpqDaNw3xCntlrIndex, cpqDaNw3xLogDrvIndex }
::= { cpqDaNw3xDriverStatTable 1 }
CpqDaNw3xDriverStatEntry ::= SEQUENCE
{
cpqDaNw3xCntlrIndex INTEGER,
cpqDaNw3xLogDrvIndex INTEGER,
cpqDaNw3xTotalReads Counter,
cpqDaNw3xTotalWrites Counter,
cpqDaNw3xCorrReads Counter,
cpqDaNw3xCorrWrites Counter,
cpqDaNw3xFatalReads Counter,
cpqDaNw3xFatalWrites Counter
}
cpqDaNw3xCntlrIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Array Controller Index.
This maps the logical drives into their respective controllers.
This controller index matches the controller group entries."
::= { cpqDaNw3xDriverStatEntry 1 }
cpqDaNw3xLogDrvIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Array Logical Drive Index.
This is the logical drive number which keeps track of multiple
instances of logical drives which are on the same controller.
For each controller index value, the logical drive index starts
at 1 and increments for each logical drive."
::= { cpqDaNw3xDriverStatEntry 2 }
cpqDaNw3xTotalReads OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Array Logical Drive Total Reads.
This shows the total number of reads performed by the IDA device
driver to this logical drive. This number is reset each time the
device driver is loaded for this logical drive."
::= { cpqDaNw3xDriverStatEntry 3 }
cpqDaNw3xTotalWrites OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Array Logical Drive Total Writes.
This shows the total number of writes performed by the IDA device
driver to this logical drive. This number is reset each time the
device driver is loaded for this logical drive."
::= { cpqDaNw3xDriverStatEntry 4 }
cpqDaNw3xCorrReads OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Array Logical Drive Corrected Reads.
This is the total number of read commands sent to the specified
logical drive which had to be corrected by fault tolerance. This
number is reset each time the device driver is loaded for this
logical drive.
If the number of corrected reads is higher than normal for a
particular system, check the physical drive screen for abnormal
activity. There may be a problem with a drive. If you suspect
that a problem exists, schedule server down time to run
diagnostics on the monitored system."
::= { cpqDaNw3xDriverStatEntry 5 }
cpqDaNw3xCorrWrites OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Array Logical Drive Corrected Writes.
This is the total number of write commands sent to the specified
logical drive which had to be corrected by fault tolerance. This
number is reset each time the device driver is loaded for this
logical drive.
If the number of corrected writes is higher than normal for a
particular system, check the physical drive screen for abnormal
activity. There may be a problem with a drive. If you suspect
that a problem exists, schedule server down time to run
diagnostics on the monitored system."
::= { cpqDaNw3xDriverStatEntry 6 }
cpqDaNw3xFatalReads OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Array Logical Drive Fatal Reads.
This is the total number of read commands sent to the specified
logical drive which failed. This number is reset each time the
device driver is loaded for this logical drive.
The drive array was unable to correct these reads. Check the
drive status to see if any of the drives have failed. If a
drive has failed you will need to replace the drive."
::= { cpqDaNw3xDriverStatEntry 7 }
cpqDaNw3xFatalWrites OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Array Logical Drive Fatal Writes.
This is the total number of write commands sent to the specified
logical drive which failed. This number is reset each time the
device driver is loaded for this logical drive.
The drive array was unable to correct these writes. Check the
drive status to see if any of the drives have failed. If a
drive has failed you will need to replace the drive."
::= { cpqDaNw3xDriverStatEntry 8 }
-- ****************************************************************************
-- Drive Array NetWare Volume Map
-- ==============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaInterface Group (1.3.6.1.4.1.232.3.2.1)
-- cpqDaOsNetWare3x Group (1.3.6.1.4.1.232.3.2.1.1)
-- cpqDaNw3xVolMapTable (1.3.6.1.4.1.232.3.2.1.1.6)
--
-- ****************************************************************************
cpqDaNw3xVolMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaNw3xVolMapEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Volume Map Table.
This is a table of NetWare volumes which map into the
logical drives"
::= { cpqDaOsNetWare3x 6 }
cpqDaNw3xVolMapEntry OBJECT-TYPE
SYNTAX CpqDaNw3xVolMapEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Volume Map Table Entry.
One entry in the volume map table. Each entry represents
a logical drive for which the volume map is kept."
INDEX { cpqDaNw3xVolCntlrIndex, cpqDaNw3xVolLogDrvIndex }
::= { cpqDaNw3xVolMapTable 1 }
CpqDaNw3xVolMapEntry ::= SEQUENCE
{
cpqDaNw3xVolCntlrIndex INTEGER,
cpqDaNw3xVolLogDrvIndex INTEGER,
cpqDaNw3xVolMap OCTET STRING
}
cpqDaNw3xVolCntlrIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Array Controller Index.
This maps the logical drives into their respective controllers.
This controller index matches the controller group entries."
::= { cpqDaNw3xVolMapEntry 1 }
cpqDaNw3xVolLogDrvIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Array Logical Drive Index.
This is the logical drive number which keeps track of multiple
instances of logical drives which are on the same controller.
For each controller index value, the logical drive index starts
at 1 and increments for each logical drive."
::= { cpqDaNw3xVolMapEntry 2 }
cpqDaNw3xVolMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"NetWare Volume Map.
This is a data structure containing the volume mappings for this
logical drive. There are 8 entries in a volume mapping. Each
entry has the following format. An entry can be null indicating
no mapping exists.
BYTE Name[16]
BYTE Segment"
::= { cpqDaNw3xVolMapEntry 3 }
-- ****************************************************************************
-- Drive Array Common Group
-- ========================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaInterface Group (1.3.6.1.4.1.232.3.2.1)
-- cpqDaOsCommon Group (1.3.6.1.4.1.232.3.2.1.4)
--
-- The cpqDaOsCommon group describes the interface to the Drive Array
-- components. This information describes the interface modules
-- and general OS interface architectural information.
--
-- Implementation of the cpqDaOsCommon group is mandatory for all
-- agents that support the Drive Array MIB.
--
-- ****************************************************************************
cpqDaOsCommonPollFreq OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Insight Agent's polling frequency.
The frequency, in seconds, at which the Insight Agent requests
information from the device driver. A frequency of zero (0)
indicates that the Insight Agent retrieves the information upon
request of a management station, it does not poll the device
driver at a specific interval.
If the poll frequency is zero (0) all attempts to write to
this object will fail. If the poll frequency is non-zero,
setting this value will change the polling frequency of the
Insight Agent. Setting the poll frequency to zero (0) will
always fail, an agent may also choose to fail any request to
change the poll frequency to a value that would severely impact
system performance."
::= { cpqDaOsCommon 1 }
-- ****************************************************************************
-- Drive Array Common Module
-- =========================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaInterface Group (1.3.6.1.4.1.232.3.2.1)
-- cpqDaOsCommon Group (1.3.6.1.4.1.232.3.2.1.4)
-- cpqDaOsCommonModuleTable (1.3.6.1.4.1.232.3.2.1.4.2) deprecated
--
-- ****************************************************************************
cpqDaOsCommonModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaOsCommonModuleEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A table of software modules that provide an interface to the
device this MIB describes."
::= { cpqDaOsCommon 2 }
cpqDaOsCommonModuleEntry OBJECT-TYPE
SYNTAX CpqDaOsCommonModuleEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A description of a software module that provides an interface
to the device this MIB describes."
INDEX { cpqDaOsCommonModuleIndex }
::= { cpqDaOsCommonModuleTable 1 }
CpqDaOsCommonModuleEntry ::= SEQUENCE {
cpqDaOsCommonModuleIndex INTEGER,
cpqDaOsCommonModuleName DisplayString,
cpqDaOsCommonModuleVersion DisplayString,
cpqDaOsCommonModuleDate OCTET STRING,
cpqDaOsCommonModulePurpose DisplayString
}
cpqDaOsCommonModuleIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"A unique index for this module description."
::= { cpqDaOsCommonModuleEntry 1 }
cpqDaOsCommonModuleName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The module name."
::= { cpqDaOsCommonModuleEntry 2 }
cpqDaOsCommonModuleVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..5))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The module version in XX.YY format.
Where XX is the major version number and YY is the minor version
number. This field will be a null (size 0) string if the agent
cannot provide the module version."
::= { cpqDaOsCommonModuleEntry 3 }
cpqDaOsCommonModuleDate OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (7))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The module date.
field octets contents range
===== ====== ======= =====
1 1-2 year 0..65536
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minute 0..59
6 7 second 0..60
(use 60 for leap-second)
This field will be set to year = 0 if the agent cannot provide
the module date. The hour, minute, and second field will be set
to zero (0) if they are not relevant. The year field is set
with the most significant octect first."
::= { cpqDaOsCommonModuleEntry 4 }
cpqDaOsCommonModulePurpose OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The purpose of the module described in this entry."
::= { cpqDaOsCommonModuleEntry 5 }
-- ****************************************************************************
-- End of cpqDaOsCommonModuleTable
-- ****************************************************************************
cpqDaOsCommonCollectionReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
resetSupported(2),
resetNotSupported(3),
doReset(4)
}
ACCESS read-write
STATUS optional
DESCRIPTION
"Drive Array MIB Collection Reset.
This variable is used to force the collection agent for this
MIB to scan the associated hardware for configuration changes.
The following values are defined:
other(1)
The agent is unable to determine if collection reset is
supported. Any attempts to write to this variable will be
ignored.
resetSupported(2)
The agent supports collection reset. A value of doReset(4)
may be written to force a collection reset.
resetNotSupported(3)
The agent does not support collection reset. Any attempts to
write to this variable will be ignored.
doReset(4)
This is a write only value used to cause a collection reset.
Writing this value is only allowed when a read of this variable
returns resetSupported(2)."
::= { cpqDaOsCommon 3 }
-- ****************************************************************************
-- Drive Array Controller Group
-- ============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaCntlr Group (1.3.6.1.4.1.232.3.2.2)
-- cpqDaCntlrTable (1.3.6.1.4.1.232.3.2.2.1)
--
-- The Cntlr group contains the configuration and statistical
-- information of the Drive Array controllers, controller cache module
-- daughter boards and Smart cables.
--
-- Implementation of the cpqDaCntlr group is mandatory for all agents
-- that support the Drive Array MIB.
--
-- ****************************************************************************
cpqDaCntlrTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaCntlrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Array Controller Table."
::= { cpqDaCntlr 1 }
cpqDaCntlrEntry OBJECT-TYPE
SYNTAX CpqDaCntlrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Array Controller Entry."
INDEX { cpqDaCntlrIndex }
::= { cpqDaCntlrTable 1 }
CpqDaCntlrEntry ::= SEQUENCE
{
cpqDaCntlrIndex INTEGER,
cpqDaCntlrModel INTEGER,
cpqDaCntlrFWRev DisplayString,
cpqDaCntlrStndIntr INTEGER,
cpqDaCntlrSlot INTEGER,
cpqDaCntlrCondition INTEGER,
cpqDaCntlrProductRev DisplayString,
cpqDaCntlrPartnerSlot INTEGER,
cpqDaCntlrCurrentRole INTEGER,
cpqDaCntlrBoardStatus INTEGER,
cpqDaCntlrPartnerBoardStatus INTEGER,
cpqDaCntlrBoardCondition INTEGER,
cpqDaCntlrPartnerBoardCondition INTEGER,
cpqDaCntlrDriveOwnership INTEGER,
cpqDaCntlrSerialNumber DisplayString,
cpqDaCntlrRedundancyType INTEGER,
cpqDaCntlrRedundancyError INTEGER,
cpqDaCntlrAccessModuleStatus INTEGER,
cpqDaCntlrDaughterBoardType INTEGER,
cpqDaCntlrHwLocation DisplayString,
cpqDaCntlrNumberOfBuses INTEGER,
cpqDaCntlrBlinkTime Counter,
cpqDaCntlrRebuildPriority INTEGER,
cpqDaCntlrExpandPriority INTEGER,
cpqDaCntlrNumberOfInternalPorts INTEGER,
cpqDaCntlrNumberOfExternalPorts INTEGER,
cpqDaCntlrDriveWriteCacheState INTEGER,
cpqDaCntlrPartnerSerialNumber DisplayString,
cpqDaCntlrOptionRomRev DisplayString,
cpqDaCntlrHbaFWRev DisplayString,
cpqDaCntlrHBAModeOptionRomRev DisplayString,
cpqDaCntlrCurrentTemp INTEGER,
cpqDaCntlrLastLockupCode INTEGER,
cpqDaCntlrEncryptionStatus INTEGER,
cpqDaCntlrASICEncptSelfTestStatus INTEGER,
cpqDaCntlrEncryptCspNvramStatus INTEGER,
cpqDaCntlrEncryptCryptoOfficerPwdSetStatus INTEGER,
cpqDaCntlrEncryptCntlrPwdSetStatus INTEGER,
cpqDaCntlrEncryptCntlrPwdAvailStatus INTEGER,
cpqDaCntlrUnencryptedLogDrvCreationPolicy INTEGER,
cpqDaCntlrEncryptedLogDrvCreationPolicy INTEGER,
cpqDaCntlrEncryptFWLockStatus INTEGER,
cpqDaCntlrOperatingMode INTEGER
}
cpqDaCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Index.
This value is a logical number whose meaning is OS dependent.
Each physical controller has one unique controller number
associated with it."
::= { cpqDaCntlrEntry 1 }
cpqDaCntlrModel OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ida(2),
idaExpansion(3),
ida-2(4),
smart(5),
smart-2e(6),
smart-2p(7),
smart-2sl(8),
smart-3100es(9),
smart-3200(10),
smart-2dh(11),
smart-221(12),
sa-4250es(13),
sa-4200(14),
sa-integrated(15),
sa-431(16),
sa-5300(17),
raidLc2(18),
sa-5i(19),
sa-532(20),
sa-5312(21),
sa-641(22),
sa-642(23),
sa-6400(24),
sa-6400em(25),
sa-6i(26),
sa-generic(27),
sa-p600(29),
sa-p400(30),
sa-e200(31),
sa-e200i(32),
sa-p400i(33),
sa-p800(34),
sa-e500(35),
sa-p700m(36),
sa-p212(37),
sa-p410(38),
sa-p410i(39),
sa-p411(40),
sa-b110i(41),
sa-p712m(42),
sa-p711m(43),
sa-p812(44),
sw-1210m(45),
sa-p220i(46),
sa-p222(47),
sa-p420(48),
sa-p420i(49),
sa-p421(50),
sa-b320i(51),
sa-p822(52),
sa-p721m(53),
sa-b120i(54),
hps-1224(55),
hps-1228(56),
hps-1228m(57),
sa-p822se(58),
hps-1224e(59),
hps-1228e(60),
hps-1228em(61),
sa-p230i(62),
sa-p430i(63),
sa-p430(64),
sa-p431(65),
sa-p731m(66),
sa-p830i(67),
sa-p830(68),
sa-p831(69),
sa-p530(70),
sa-p531(71),
sa-p244br(72),
sa-p246br(73),
sa-p440(74),
sa-p440ar(75),
sa-p441(76),
sa-p741m(77),
sa-p840(78),
sa-p841(79),
sh-h240ar(80),
sh-h244br(81),
sh-h240(82),
sh-h241(83),
sa-b140i(84),
sh-generic(85),
sa-p840ar(88)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Model.
The type of controller card. The valid types are:
Other (1)
You may need to upgrade your driver software and\or instrument
agent(s). You have a drive array controller in the system
that the instrument agent does not recognize.
IDA (2)
Compaq 32-Bit Intelligent Drive Array Controller.
The physical drives are located inside the system.
IDA Expansion (3)
Compaq 32-Bit Intelligent Drive Array Expansion Controller.
The physical drives are located in the Array Expansion System
that is connected to the system by a cable.
IDA - 2 (4)
Compaq Intelligent Drive Array Controller-2 (IDA-2).
The physical drives are located inside the system.
SMART (5)
Compaq SMART Array Controller. The physical drives can be
located inside the system or outside the system in a ProLiant
Storage System that is connected to the system by a cable.
SMART - 2/E (6)
Compaq SMART-2/E Array Controller. The physical drives can be
located inside the system or outside the system in a ProLiant
Storage System that is connected to the system by a cable.
SMART - 2/P (7)
Compaq SMART-2/P Array Controller. The physical drives can be
located inside the system or outside the system in a ProLiant
Storage System that is connected to the system by a cable.
SMART - 2SL (8)
Compaq SMART-2SL Array Controller. The physical drives can be
located inside the system or outside the system in a ProLiant
Storage System that is connected to the system by a cable.
Smart - 3100ES (9)
Compaq Smart Array 3100ES Controller. The physical drives are
located inside the system.
Smart - 3200 (10)
Compaq Smart Array 3200 Controller. The physical drives can
be located inside the system or outside the system in a
ProLiant Storage System that is connected to the system by a
cable.
SMART - 2DH (11)
Compaq SMART-2DH Array Controller. The physical drives can be
located inside the system or outside the system in a ProLiant
Storage System that is connected to the system by a cable.
Smart - 221 (12)
Compaq Smart Array 221 Controller. The physical drives can be
located inside the system or outside the system in a ProLiant
Storage System that is connected to the system by a cable.
Smart Array 4250ES (13)
Compaq Smart Array 4250ES Controller. The physical drives are
located inside the system.
Smart Array 4200 (14)
Compaq Smart Array 4200 Controller. The physical drives can
be located inside the system or outside the system in a
ProLiant Storage System that is connected to the system by a
cable.
Integrated Smart Array (15)
Compaq Integrated Smart Array Controller. The physical drives
can be located inside the system or outside the system in a
ProLiant Storage System that is connected to the system by a
cable.
Smart Array 431 (16)
Compaq Smart Array 431 Controller. The physical drives can be
located inside the system or outside the system in a ProLiant
Storage System that is connected to the system by a cable.
Smart Array 5300 (17)
HP Smart Array 5300 Controller.
RAID LC2 Controller (18)
Compaq RAID LC2 Controller.
Smart Array 5i (19)
HP Smart Array 5i Controller.
Smart Array 532 (20)
Compaq Smart Array 532 Controller.
Smart Array 5312 (21)
Compaq Smart Array 5312 Controller.
Smart Array 641 (22)
HP Smart Array 641 Controller.
Smart Array 642 (23)
HP Smart Array 642 Controller.
Smart Array 6400 (24)
HP Smart Array 6400 Controller.
Smart Array 6400 EM (25)
HP Smart Array 6400 EM Controller.
Smart Array 6i (26)
HP Smart Array 6i Controller.
Generic Array (27)
Array Controller.
Reserved (28)
Smart Array P600 (29)
HP Smart Array P600 Controller.
Smart Array P400 (30)
HP Smart Array P400 Controller.
Smart Array E200 (31)
HP Smart Array E200 Controller.
Smart Array E200i (32)
HP Smart Array E200i Controller.
Smart Array P400i (33)
HP Smart Array P400i Controller.
Smart Array P800 (34)
HP Smart Array P800 Controller.
Smart Array E500 (35)
HP Smart Array E500 Controller.
Smart Array P700m (36)
HP Smart Array P700m Controller.
Smart Array P212 (37)
HP Smart Array P212 Controller.
Smart Array P410 (38)
HP Smart Array P410 Controller.
Smart Array P410i (39)
HP Smart Array P410i Controller.
Smart Array P411 (40)
HP Smart Array P411 Controller.
Smart Array B110i SATA RAID (41)
HP Smart Array B110i SATA RAID Controller.
Smart Array P712m (42)
HP Smart Array P712m Controller.
Smart Array P711m (43)
HP Smart Array P711m Controller.
Smart Array P812 (44)
HP Smart Array P812 Controller.
StorageWorks 1210m (45)
HP StorageWorks 1210m Scalable Storage Controller.
Smart Array P220i (46)
HP Smart Array P220i Controller.
Smart Array P222 (47)
HP Smart Array P222 Controller.
Smart Array P420 (48)
HP Smart Array P420 Controller.
Smart Array P420i (49)
HP Smart Array P420i Controller.
Smart Array P421 (50)
HP Smart Array P421 Controller.
Smart Array B320i (51)
HP Dynamic Smart Array B320i Controller.
Smart Array P822 (52)
HP Smart Array P822 Controller.
Smart Array P721m (53)
HP Smart Array P721m Controller.
Smart Array B120i (54)
HP Dynamic Smart Array B120i Controller.
HP Storage p1224 (55)
HP Storage p1224 Array Controller.
HP Storage p1228 (56)
HP Storage p1228 Array Controller.
HP Storage p1228m (57)
HP Storage p1228m Array Controller.
Smart Array P822se (58)
HP Smart Array P822se Controller.
HP Storage p1224e (59)
HP Storage p1224e Array Controller.
HP Storage p1228e (60)
HP Storage p1228e Array Controller.
HP Storage p1228em (61)
HP Storage p1228em Array Controller.
Smart Array P230i (62)
HP Smart Array P230i Controller.
Smart Array P430i (63)
HP Smart Array P430i Controller.
Smart Array P430 (64)
HP Smart Array P430 Controller.
Smart Array P431 (65)
HP Smart Array P431 Controller.
Smart Array P731m (66)
HP Smart Array P731m Controller.
Smart Array P830i (67)
HP Smart Array P830i Controller.
Smart Array P830 (68)
HP Smart Array P830 Controller.
Smart Array P831 (69)
HP Smart Array P831 Controller.
Smart Array P530 (70)
HP Smart Array P530 Controller.
Smart Array P531 (71)
HP Smart Array P531 Controller.
Smart Array P244br (72)
HP Smart Array P244br Controller.
Smart Array P246br (73)
HP Smart Array P246br Controller.
Smart Array P440 (74)
HP Smart Array P440 Controller.
Smart Array P440ar (75)
HP Smart Array P440ar Controller.
Smart Array P441 (76)
HP Smart Array P441 Controller.
Smart Array P741m (77)
HP Smart Array P741m Controller.
Smart Array P840 (78)
HP Smart Array P840 Controller.
Smart Array P841 (79)
HP Smart Array P841 Controller.
Smart HBA H240ar (80)
HP Smart HBA H240ar.
Smart HBA H244br (81)
HP Smart HBA H244br.
Smart HBA H240 (82)
HP Smart HBA H240.
Smart HBA H241 (83)
HP Smart HBA H241.
Smart Array B140i (84)
HP Dynamic Smart Array B140i Controller.
Generic HBA (85)
Smart HBA.
Smart Array P840ar (88)
HP Smart Array P840ar Controller."
::= { cpqDaCntlrEntry 2 }
cpqDaCntlrFWRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..5))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Firmware Revision.
The firmware revision of the drive array controller. This
value can be used to help identify a particular revision
of the controller. For B-Series controllers this value is the
RAID Stack Revision that is running and this value may change when
upgrading or downgrading the operating system device driver."
::= { cpqDaCntlrEntry 3 }
cpqDaCntlrStndIntr OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
primary(2),
secondary(3),
disabled(4),
unavailable(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the Standard Interface.
The Standard Interface is how DOS communicates with a drive.
The following values are valid for Standard Interface:
Other (1)
The device driver may not be loaded for this controller.
The instrument agent could not read the information from the
device. Please load the device driver.
Primary (2)
The Standard Interface is using the primary address for
communication. DOS can access this drive and use this drive
as the primary boot device if it has been configured for this
purpose.
Secondary (3)
The Standard Interface is using the secondary address for
communication. DOS can access these drives, but cannot boot
from them.
Disabled (4)
The Standard Interface is not enabled for communication.
DOS will not be able to access these drives.
Unavailable (5)
This controller does not support a Standard Interface.
DOS cannot access these drives."
::= { cpqDaCntlrEntry 4 }
cpqDaCntlrSlot OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Slot.
This identifies the physical slot where the array controller
resides in the system. For example, if this value is three,
the array controller is located in slot three of your computer."
::= { cpqDaCntlrEntry 5 }
cpqDaCntlrCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The condition of the device. This value represents the overall
condition of this controller, and any associated logical drives,
physical drives, and cache modules."
::= { cpqDaCntlrEntry 6 }
cpqDaCntlrProductRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Product Revision.
The Product Revision of the drive array controller. This value
can be used to further identify a particular revision of the
controller model. This will be one character ASCII value that
is zero terminated. If the controller model or the firmware
does not support the product revision, the agents will return
a NULL string."
::= { cpqDaCntlrEntry 7 }
cpqDaCntlrPartnerSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Partner Slot.
For duplexed array controllers, this is the slot number of the
partner controller. For non-duplexed controllers and partner
controllers that reside in a separate host system, the value should
be -1."
::= { cpqDaCntlrEntry 8 }
cpqDaCntlrCurrentRole OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notDuplexed(2),
active(3),
backup(4),
asymActiveActive(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Current Role.
For duplexed array controllers, this is the controllers current
role. The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
role of the controller. You may need to upgrade the instrument
agent.
notDuplexed (2)
This array controller is not duplexed.
active (3)
This duplexed array controller is the active controller.
backup (4)
This duplexed array controller is the backup controller.
asymActiveActive (5)
This array controller is part of an asymmetrical active-active set of controllers."
::= { cpqDaCntlrEntry 9 }
cpqDaCntlrBoardStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
generalFailure(3),
cableProblem(4),
poweredOff(5),
cacheModuleMissing(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Board Status.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
status of the controller. You may need to upgrade the instrument
agent.
ok (2)
The array controller is operating properly.
generalFailure (3)
The array controller is failed. After the system is rebooted,
check the variable cpqDaCntlrLastLockupCode for the controller's
last lockup code.
cableProblem (4)
The array controller has a cable problem. Please check
all cable connections to this controller.
poweredOff (5)
The array controller is powered off. Please replace the
controller and restore power to the slot.
cacheModuleMissing (6)
The array controller is operating without a cache module which
is an unsupported configuration. Please install a cache module
to the controller."
::= { cpqDaCntlrEntry 10 }
cpqDaCntlrPartnerBoardStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
generalFailure(3),
cableProblem(4),
poweredOff(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Partner Board Status.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
status of the controller. You may need to upgrade the instrument
agent.
ok (2)
The partner array controller is operating properly.
generalFailure (3)
The partner array controller is failed.
cableProblem (4)
The partner array controller has a cable problem. Please check
all cable connections to this controller.
poweredOff (5)
The array controller is powered off. Please replace the
controller and restore power to the slot."
::= { cpqDaCntlrEntry 11 }
cpqDaCntlrBoardCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The condition of the device. This value represents the
condition of the controller and any associated cache
modules."
::= { cpqDaCntlrEntry 12 }
cpqDaCntlrPartnerBoardCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The condition of the device. This value represents the
condition of the controller and any associated cache
modules."
::= { cpqDaCntlrEntry 13 }
cpqDaCntlrDriveOwnership OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
owner(2),
notOwner(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Drive Ownership.
For duplexed controllers, indicates to which controller slot
the shared devices are associated.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
status of the controller. You may need to upgrade the instrument
agent.
owner (2)
All the logical, physical and spare drives are associated
with this controller.
notOwner (3)
The logical, physical and spare drives are not associated
with this controller."
::= { cpqDaCntlrEntry 14 }
cpqDaCntlrSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Serial Number.
The serial number of the array controller. This field will
be a null (size 0) string if the controller does not support
serial number."
::= { cpqDaCntlrEntry 15 }
cpqDaCntlrRedundancyType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notRedundant(2),
driverDuplexing(3),
fwActiveStandby(4),
fwPrimarySecondary(5),
fwActiveActive(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Redundancy Type.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
redundancy type of the controller. You may need to upgrade
the instrument agent.
notRedundant (2)
The array controller is not in a redundant configuration.
driverDuplexing (3)
The array controller is using a controller duplexing algorithm
implemented exclusively in the operating system driver.
fwActiveStandby (4)
The array controller is using an active/standby algorithm
implemented in the controller firmware and the operating system
driver.
fwPrimarySecondary (5)
The array controller is using a primary/secondary algorithm
implemented in the controller firmware and the operating system
driver.
fwActiveActive (6)
The array controller is using an active/active algorithm
implemented in the controller firmware."
::= { cpqDaCntlrEntry 16 }
cpqDaCntlrRedundancyError OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
noFailure(2),
noRedundantController(3),
differentHardware(4),
noLink(5),
differentFirmware(6),
differentCache(7),
otherCacheFailure(8),
noDrives(9),
otherNoDrives(10),
unsupportedDrives(11),
expandInProgress(12)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Redundancy Error.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
redundancy error of the controller. You may need to upgrade
the instrument agent.
noFailure (2)
No failures have been detected.
noRedundantController (3)
No redundant controller is installed.
differentHardware (4)
The other controller indicates a different hardware model.
noLink (5)
An inter-controller link to the other controller could not be
established.
differentFirmware (6)
The other controller indicates a different firmware version.
differentCache (7)
The other controller indicates a different cache size.
otherCacheFailure (8)
The other controller indicates a cache failure.
noDrives (9)
This controller cannot see any attached drives, but the other
controller can.
otherNoDrives (10)
This controller can see the attached drives, but the other
controller cannot.
unsupportedDrives (11)
One or more attached drives has been determined to be incapable
of properly supporting redundant controller operation.
expandInProgress (12)
Expand operation in progress. Redundant operation not
supported until expand operation is complete."
::= { cpqDaCntlrEntry 17 }
cpqDaCntlrAccessModuleStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notSupported(2),
notPresent(3),
badSignature(4),
badChecksum(5),
fullyFunctional(6),
upgradeFirmware(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller RAID ADG Enabler Module Status.
The following values are valid:
other (1)
Indicates that the agent does not recognize the RAID ADG
Enabler Module status. You may need to upgrade the agent.
notSupported (2)
Indicates that the RAID ADG Enabler Module is not supported on
this type of controller.
notPresent (3)
Indicates that the RAID ADG Enabler Module is not present or
is not accessible.
badSignature (4)
Indicates that the RAID ADG Enabler Module is present, but has
an incorrect signature.
badChecksum (5)
Indicates that the RAID ADG Enabler Module is present, but the
checksum failed.
fullyFunctional (6)
Indicates that the RAID ADG Enabler Module is present and
fully functional.
upgradeFirmware (7)
Indicates that the RAID ADG Enabler Module is present, but a
firmware upgrade is required to make it fully functional."
::= { cpqDaCntlrEntry 18 }
cpqDaCntlrDaughterBoardType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notSupported(2),
notPresent(3),
scsiBoardPresent(4),
fibreBoardPresent(5),
arrayExpansionModulePresent(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Daughter Board Type.
The following values are valid:
other (1)
Indicates that the agent does not recognize the daughter
board type. You may need to upgrade the agent.
notSupported (2)
Indicates that the daughter board type field is not supported
on this type of controller.
notPresent (3)
Indicates that no daughter board is present.
scsiBoardPresent (4)
Indicates that the SCSI daughter board is present.
fibreBoardPresent (5)
Indicates that the Fibre daughter board is present.
arrayExpansionModulePresent (6)
Indicates that an array Expansion Module is present."
::= { cpqDaCntlrEntry 19 }
cpqDaCntlrHwLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A text description of the hardware location of the controller.
A NULL string indicates that the hardware location could not
be determined or is irrelevant."
::= { cpqDaCntlrEntry 20 }
cpqDaCntlrNumberOfBuses OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Number of Buses.
This value is the number of SCSI buses on the controller."
::= { cpqDaCntlrEntry 21 }
cpqDaCntlrBlinkTime OBJECT-TYPE
SYNTAX Counter
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controller Physical Drive Blink Time Count.
The controller blink time variable allows the drive tray LEDs
of all physical drives attached to this controller to blink.
This value indicates the amount of time, in tenths of a second,
that the physical drive LEDs will continue to blink. A value
of zero indicates the drive LEDs are not blinking. If the
value cannot be determined or no drive on this controller is in
a hot plug tray, 4,294,967,295 is returned.
To blink the drive LEDs on all physical drives attached to this
controller, set this value to the time to blink in tenths of
seconds.
To stop the drive LEDs from blinking, set this value to 0."
::= { cpqDaCntlrEntry 22 }
cpqDaCntlrRebuildPriority OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
low(2),
medium(3),
high(4),
mediumHigh(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Rebuild Priority.
This is the controller's rebuild priority. The following values
are valid:
other (1)
Indicates that the instrument agent does not recognize the
rebuild priority of the controller. You may need to upgrade
the instrument agent.
low (2)
The rebuild priority is low.
medium (3)
The rebuild priority is medium.
high (4)
The rebuild priority is high.
mediumHigh(5)
The rebuild priority is mediumHigh."
::= { cpqDaCntlrEntry 23 }
cpqDaCntlrExpandPriority OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
low(2),
medium(3),
high(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Expand Priority.
This is the controller's expand priority. The following values
are valid:
other (1)
Indicates that the instrument agent does not recognize the
expand priority of the controller. You may need to upgrade
the instrument agent.
low (2)
The expand priority is low.
medium (3)
The expand priority is medium.
high (4)
The expand priority is high."
::= { cpqDaCntlrEntry 24 }
cpqDaCntlrNumberOfInternalPorts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Number of Internal Ports.
This value is the number of internal connectors on the
controller."
::= { cpqDaCntlrEntry 25 }
cpqDaCntlrNumberOfExternalPorts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Number of External Ports.
This value is the number of external connectors on the
controller."
::= { cpqDaCntlrEntry 26 }
cpqDaCntlrDriveWriteCacheState OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
disabled(2),
enabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Drive Write Cache State.
This is the controller's drive write cache setting. The
following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
value. You may need to upgrade the instrument agent.
disabled (2)
The controller will disable drive write cache for all drives.
enabled (3)
The controller will enable drive write cache for all drives."
::= { cpqDaCntlrEntry 27 }
cpqDaCntlrPartnerSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Partner Serial Number.
The serial number of the partner array controller. This field will
be a null (size 0) string if the partner controller does not support
serial number or in the absence of a partner controller."
::= { cpqDaCntlrEntry 28 }
cpqDaCntlrOptionRomRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..5))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Option ROM Revision.
The option ROM revision of the chipset or HBA being used by the
B-Series controller. If the controller does not support the
option ROM revision, the agents will return a NULL string."
::= { cpqDaCntlrEntry 29 }
cpqDaCntlrHbaFWRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller HBA Firmware Revision.
The firmware revision of the chipset or HBA being used by the
B-Series controller. If the controller does not support the
HBA firmware revision, the agents will return a NULL string."
::= { cpqDaCntlrEntry 30 }
cpqDaCntlrHBAModeOptionRomRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller HBA Mode Option Rom Revision.
The revision of option ROM that would run on this chipset or HBA (being
used by the B-Series controller), if it were to run in HBA mode. If
the controller does not support HBA mode option ROM revision, the
agents will return a NULL string."
::= { cpqDaCntlrEntry 31 }
cpqDaCntlrCurrentTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Current Temperature.
This is the temperature of the array controller in degrees Celsius.
The field will contain -1 if the controller temperature
cannot be calculated or if the controller does not support reporting
temperature."
::= { cpqDaCntlrEntry 32 }
cpqDaCntlrLastLockupCode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Last Lockup Code.
The lockup code of the array controller if a lockup occurred prior
to the last controller reset. This value will be nonzero if the
controller supports last lockup code and has a last lockup code
to report."
::= { cpqDaCntlrEntry 33 }
cpqDaCntlrEncryptionStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notEnabled(2),
enabledLocalKeyMode(3),
enabledRemoteKeyManagerMode(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Encryption Status.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
value. You may need to upgrade the instrument agent.
notEnabled (2)
Indicates that controller encryption is not enabled. Check other
controller encryption values for further details.
enabledLocalKeyMode (3)
Array controller encryption is enabled and is configured to operate
in local key mode.
enabledRemoteKeyManagerMode (4)
Array controller encryption is enabled and is configured to operate
in remote key manager mode."
::= { cpqDaCntlrEntry 34 }
cpqDaCntlrASICEncptSelfTestStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
selfTestsPass(2),
selfTestsFailed(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller ASIC Encryption Self Test Status.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
value. You may need to upgrade the instrument agent.
selfTestsPass(2)
Indicates that ASIC encryption self tests for this array controller
have passed.
selfTestsFailed (3)
Indicates that ASIC encryption self tests for this array controller
have failed. The array controller is not encrypted."
::= { cpqDaCntlrEntry 35 }
cpqDaCntlrEncryptCspNvramStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
detectionFailed(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Encryption Critical Security Parameter NVRAM Status.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
value. You may need to upgrade the instrument agent.
ok(2)
Indicates that the array controller has successfully detected
CSP NVRAM.
detectionFailed (3)
Indicates that the array controller has failed to detect CSP NVRAM.
The controller is not encrypted."
::= { cpqDaCntlrEntry 36 }
cpqDaCntlrEncryptCryptoOfficerPwdSetStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
false(2),
true(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Encryption Crypto Officer Password Set Status.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
value. You may need to upgrade the instrument agent.
false(2)
Indicates that the array controller's Crypto Officer password
has not been set.
true(3)
Indicates that the array controller's Crypto Officer password
has been set."
::= { cpqDaCntlrEntry 37 }
cpqDaCntlrEncryptCntlrPwdSetStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
false(2),
true(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Encryption Controller Password Set Status.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
value. You may need to upgrade the instrument agent.
false(2)
Indicates that the controller password has not been set.
true(3)
Indicates that the controller password has been set."
::= { cpqDaCntlrEntry 38 }
cpqDaCntlrEncryptCntlrPwdAvailStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
passwordMissing(2),
passwordActive(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Encryption Controller Password Availability Status.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
value. You may need to upgrade the instrument agent.
passwordMissing (2)
Indicates that the array controller password is missing. One or
more encrypted drives are currently locked and inaccessible.
passwordActive (3)
Indicates that the array controller password is active and in use."
::= { cpqDaCntlrEntry 39 }
cpqDaCntlrUnencryptedLogDrvCreationPolicy OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
false(2),
true(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Unencrypted Logical Drive Creation Policy.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
value. You may need to upgrade the instrument agent.
false (2)
Unencrypted logical drive creation is not allowed. Check
Smart Array controller documentation for further information.
true(3)
Unencrypted logical drive creation is allowed."
::= { cpqDaCntlrEntry 40 }
cpqDaCntlrEncryptedLogDrvCreationPolicy OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
false(2),
true(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Encrypted Logical Drive Creation Policy.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
value. You may need to upgrade the instrument agent.
false (2)
Encrypted logical drive creation is not allowed. Check
Smart Array controller documentation for further information.
true(3)
Encrypted logical drive creation is allowed."
::= { cpqDaCntlrEntry 41 }
cpqDaCntlrEncryptFWLockStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
false(2),
true(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Encryption Firmware Lock Status.
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
value. You may need to upgrade the instrument agent.
false(2)
Indicates that the array controller's firmware is not locked.
true(3)
Indicates that the array controller's firmware has been locked."
::= { cpqDaCntlrEntry 42 }
cpqDaCntlrOperatingMode OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
smartArrayMode(2),
smartHbaMode(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Operating Mode.
The array controller's current operating mode. The
following values are valid:
The following values are valid:
other (1)
Indicates that the instrument agent does not recognize the
value. You may need to upgrade the instrument agent.
smartArrayMode(2)
Indicates that the controller is operating as a traditional
Smart Array controller with RAID controller behavior.
smartHbaMode(3)
Indicates that the controller is operating as an HBA and does not
allow RAID configurations."
::= { cpqDaCntlrEntry 43 }
-- ****************************************************************************
-- Drive Array Cache Module Table
-- ====================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaCntlr Group (1.3.6.1.4.1.232.3.2.2)
-- cpqDaAccelTable (1.3.6.1.4.1.232.3.2.2.2)
--
-- ****************************************************************************
cpqDaAccelTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaAccelEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Cache Module Board Table. Note that for some controller models, a
cache module board that physically attaches to the controller or
chipset may not be an available option. For these configurations, the
Instrument Agent will continue to populate variables that are related
to read caching operations."
::= { cpqDaCntlr 2 }
cpqDaAccelEntry OBJECT-TYPE
SYNTAX CpqDaAccelEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Cache Module Board Entry."
INDEX { cpqDaAccelCntlrIndex }
::= { cpqDaAccelTable 1 }
CpqDaAccelEntry ::= SEQUENCE
{
cpqDaAccelCntlrIndex INTEGER,
cpqDaAccelStatus INTEGER,
cpqDaAccelMemory INTEGER,
cpqDaAccelBadData INTEGER,
cpqDaAccelErrCode INTEGER,
cpqDaAccelBattery INTEGER,
cpqDaAccelReadErrs Counter,
cpqDaAccelWriteErrs Counter,
cpqDaAccelCondition INTEGER,
cpqDaAccelReadMemory INTEGER,
cpqDaAccelSerialNumber DisplayString,
cpqDaAccelTotalMemory INTEGER,
cpqDaAccelReadCachePercent Gauge,
cpqDaAccelWriteCachePercent Gauge,
cpqDaAccelFailedBatteries OCTET STRING,
cpqDaAccelBackupPowerSource INTEGER,
cpqDaAccelBoardCurrentTemp INTEGER,
cpqDaAccelCapacitorCurrentTemp INTEGER,
cpqDaAccelMemoryDataWidth INTEGER,
cpqDaAccelMemoryTransferRate INTEGER
}
cpqDaAccelCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Module Board Controller Index.
This value is a logical number whose meaning is OS dependent.
The value has a direct mapping to the controller table index
such that controller 'i' has cache module table entry 'i'."
::= { cpqDaAccelEntry 1 }
cpqDaAccelStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
invalid(2),
enabled(3),
tmpDisabled(4),
permDisabled(5),
cacheModFlashMemNotAttached(6),
cacheModDegradedFailsafeSpeed(7),
cacheModCriticalFailure(8),
cacheReadCacheNotMapped(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Module/Operations Status.
This describes the status of the cache module and/or cache operations.
Note that for some controller models, a cache module board that
physically attaches to the controller or chipset may not be an
available option. For these configurations, the Instrument Agent
will continue to populate variables that are related to read caching
operations.
The status can be:
Other (1)
Indicates that the instrument agent does not recognize the
status of the cache module. You may need to upgrade
the instrument agent.
Invalid (2)
Indicates that a cache module board has not been
installed in this system or is present but not configured.
Enabled (3)
Indicates that cache operations are currently configured
and enabled for at least one logical drive.
Temporarily Disabled (4)
Indicates that cache operations have been temporarily
disabled. View the cache module board error code object
to determine why the write cache operations have been
temporarily disabled.
Permanently Disabled (5)
Indicates that cache operations have been permanently
disabled. View the cache module board error code object
to determine why the write cache operations have been disabled.
Cache Module Flash Memory Not Attached (6)
Indicates that the flash memory component of the flash backed
cache module is not attached. This status will be set when the flash
memory is not attached and the Supercap is attached. This value is
only used on flash backed cache modules that support removable flash
memory.
Cache Module Degraded Failsafe Speed (7)
Indicates that the cache module board is currently degraded and
operating at a failsafe speed. View variables
cpqDaCacheMemoryDataWidth and cpqDaCacheMemoryTransferRate to
obtain the cache module board's current memory data width and
memory transfer rate.
Cache Module Critical Failure (8)
Indicates that the cache module board has encountered a critical
failure. The controller is currently operating in Zero Memory Raid
mode.
Read Cache Could Not Be Mapped (9)
Indicates that the read cache memory in a split cache configuration
could not be mapped by the operating system and as a result is not
available. This status may be caused by virtual space limitations in
certain operating systems and is only applicable to B-Series
controllers."
::= { cpqDaAccelEntry 2 }
cpqDaAccelMemory OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Write Cache Memory.
This shows the amount of memory allocated for the write cache in
kilobytes. Because data is kept in duplicate (mirrored), the
actual amount of usable memory is half the amount shown."
::= { cpqDaAccelEntry 3 }
cpqDaAccelBadData OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
none(2),
possible(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Module Board Bad Data.
The following values are valid:
None (2)
Indicates that no data loss occurred. The battery packs were
properly charged when the system was initialized.
Possible (3)
Indicates that at power up, the battery packs were not
sufficiently charged. Because the batteries did not retain
sufficient charge when the system resumed power, the board
has not retained any data that may have been stored.
If no data was on the board, no data was lost. Several things
may have caused this condition:
* If the system was without power for eight days, and the
battery packs were on (battery packs only activate if
system looses power unexpectedly), any data that may have
been stored in the cache was lost.
* There may be a problem with the battery pack.
See the Battery Status for more information.
* This status will also appear if the Cache Module
board is replaced with a new board that has discharged
batteries. No data has been lost in this case, and posted
writes will automatically be enabled when the batteries
reach full charge."
::= { cpqDaAccelEntry 4 }
cpqDaAccelErrCode OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
invalid(2),
badConfig(3),
lowBattery(4),
disableCmd(5),
noResources(6),
notConnected(7),
badMirrorData(8),
readErr(9),
writeErr(10),
configCmd(11),
expandInProgress(12),
snapshotInProgress(13),
redundantLowBattery(14),
redundantSizeMismatch(15),
redundantCacheFailure(16),
excessiveEccErrors(17),
adgEnablerMissing(18),
postEccErrors(19),
batteryHotRemoved(20),
capacitorChargeLow(21),
notEnoughBatteries(22),
cacheModuleNotSupported(23),
batteryNotSupported(24),
noCapacitorAttached(25),
capBasedBackupFailed(26),
capBasedRestoreFailed(27),
capBasedModuleHWFailure(28),
capacitorFailedToCharge(29),
capacitorBasedHWMemBeingErased(30),
incompatibleCacheModule(31),
fbcmChargerCircuitFailure(32),
cbPowerSourceCableError(33)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Module Board Error Code.
Use this to determine the status of the write cache operations.
The status can be:
Other (1)
Indicates that the instrument agent does not recognize the
error code. You may need to update your software.
Invalid (2)
Indicates that write cache operations are currently
configured and enabled for at least one logical drive.
No write cache errors have occurred.
Bad Configuration (3)
Indicates that write cache operations are temporarily
disabled. The Cache Module board was configured
for a different controller. This error could be caused
if boards were switched from one system to another.
Rerun the configuration utility and ensure that the board
has been properly configured for this system.
Note: If data from another system was stored on the board,
running configuration utility will cause the data to be lost.
Low Battery Power (4)
Indicates that write cache operations are temporarily
disabled due to insufficient battery power. Please view
the Battery Status object instance for more information.
Disable Command Issued (5)
Indicates that write cache operations are temporarily
disabled. The device driver issues this command when
the server is taken down. This condition should not
exist when the system regains power.
No Resources Available (6)
Indicates that write cache operations are temporarily
disabled. The controller does not have sufficient
resources to perform write cache operations.
For example, when a replaced drive is being rebuilt,
there will not be sufficient resources. Once the
operation that requires the resources has completed,
this condition will clear and write cache operations
will resume.
Board Not Connected (7)
Indicates that write cache operations are temporarily
disabled. The Cache Module board has been
configured but is not currently attached to the
controller. Check the alignment of the board and
connections.
Bad Mirror Data (8)
Indicates that write cache operations have been
permanently disabled. The Cache Module board stores
mirrored copies of all data. If data exists on the
board when the system is first powered up, the board
performs a data compare test between the mirrored copies.
If the data does not match, an error has occurred.
Data may have been lost. Your board may need servicing.
Read Failure (9)
Indicates that write cache operations have been permanently
disabled. The Cache Module board stores mirror copies
of all data. While reading the data from the board, memory
parity errors have occurred. Both copies were corrupted and
cannot be retrieved. Data has been lost, and you should
service the board.
Write Failure (10)
Indicates that write cache operations have been permanently
disabled. This error occurs when an unsuccessful attempt was
made to write data to the Cache Module board. Data could
not be written to write cache memory in duplicate due to the
detection of parity errors. This error does not indicate data
loss. You should service the Cache Module board.
Config Command (11)
Indicates that write cache operations have been permanently
disabled. The configuration of the logical drives has changed.
You need to reconfigure the Cache Module board.
Expand in Progress (12)
Indicates that cache operations are temporarily disabled
due to an expand of a logical drive. When the expand
operation completes, the cache module will be enabled.
Snapshot In Progress (13)
Indicates that cache operations are temporarily disabled
due to a snapshot operation that is queued up or in progress.
When the snapshot operation completes, the cache module will
be enabled.
Redundant Low Battery (14)
Indicates that cache operations are temporarily disabled.
The redundant controller has insufficient cache battery power.
Redundant Size Mismatch (15)
Indicates that cache operations are temporarily disabled.
The cache sizes on the redundant controllers do not match.
Redundant Cache Failure (16)
Indicates that cache operations are temporarily disabled.
The cache on the redundant controller has failed.
Excessive ECC Errors (17)
Indicates that write cache operations have been permanently
disabled. The number of cache lines experiencing excessive
ECC errors has reached a preset limit.
RAID ADG Enabler Module Missing (18)
Indicates that write cache operations have been temperarily
disabled. A RAID ADG logical drive is configured but the
RAID ADG Enabler Module is broken or missing.
Power On Self Test (Post) ECC Errors (19)
Indicates that write cache operations have been permanently
disabled. The cache has been disabled due to a large number
of ECC errors detected while testing the cache during Power
On Self Test (Post).
Backup Power Source Hot Removed (20)
Indicates that write cache operations have been permanently
disabled. The cache has been disabled because a backup power
source has been hot removed.
Flash Backed Cache Module Capacitor Charge Low (21)
Indicates that write cache operations are temporarily
disabled due to insufficient capacitor power.
Not Enough Batteries (22)
Indicates that write cache operations have been permanently
disabled. The cache has been disabled because there are not
enough batteries attached to the controller to ensure write
cache will be held without power for the advertised length
of time.
Cache Module Not Supported By Firmware (23)
Indicates that write cache operations have been permanently
disabled. The cache has been disabled because the current
cache module is not supported by the currently running firmware.
Battery Not Supported (24)
Indicates that write cache operations have been permanently
disabled. The cache has been disabled because one or more
attached batteries are not supported by the currently running
firmware.
No Capacitor Attached (25)
Indicates that write cache operations have been permanently
disabled. The cache has been disabled because there are no
capacitors attached to the flash backed cache module.
Flash Backed Cache Module Backup Failed (26)
Indicates that write cache operations have been permanently
disabled. The cache has been disabled because the flash
backed cache module backup operation has failed.
Flash Backed Cache Module Restore Failed (27)
Indicates that write cache operations have been permanently
disabled. The cache has been disabled because the flash
backed cache module restore operation has failed.
Flash Backed Cache Module Hardware Failure (28)
Indicates that write cache operations have been permanently
disabled. The cache has been disabled because the flash
backed cache module has encountered a hardware failure.
Capacitor Failed To Charge (29)
Indicates that write cache operations have been permanently
disabled. The cache has been disabled because the flash
backed cache module capacitor has failed to charge.
Flash Backed Cache Module Memory Being Erased (30)
Indicates that write cache operations have been temporarily
disabled. The cache has been disabled because the flash
backed cache module is erasing its flash memory.
Incompatible Cache Module (31)
Indicates that write cache operations have been permanently
disabled. The cache has been disabled because an incompatible
cache module is being used.
Flash Backed Cache Module Charger Circuit Failure (32)
Indicates that write cache operations have been permanently
disabled. The cache has been disabled because the charger circuit
on the flash backed cache module has failed.
Centralized Backup Power Source Cable Error (33)
Indicates that write cache operations have been permanently
disabled. The cache has been disabled because the controller
detected a cable error to the centralized backup power source."
::= { cpqDaAccelEntry 5 }
cpqDaAccelBattery OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
recharging(3),
failed(4),
degraded(5),
notPresent(6),
capacitorFailed(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Module Board Backup Power Status.
This monitors the status of each backup power source on the board.
The backup power source can only recharge when the system has
power applied. The type of backup power source used is indicated
by cpqDaAccelBackupPowerSource.
The following values are valid:
Other (1)
Indicates that the instrument agent does not recognize
backup power status. You may need to update your software.
Ok (2)
The backup power source is fully charged.
Recharging (3)
The array controller has one or more cache module backup power
sources that are recharging. Cache module operations such as
Battery/Flash Backed Write Cache, Expansion, Extension and Migration
are temporarily suspended until the backup power source is fully
charged. Cache module operations will automatically resume
when charging is complete.
Failed (4)
The battery pack is below the sufficient voltage level and
has not recharged in 36 hours. Your Cache Module board
needs to be serviced.
Degraded (5)
The battery is still operating, however, one of the batteries
in the pack has failed to recharge properly. Your Cache
Module board should be serviced as soon as possible.
NotPresent (6)
A backup power source is not present on the cache module board.
Some controllers do not have backup power sources.
Capacitor Failed (7)
The flash backed cache module capacitor is below the sufficient
voltage level and has not recharged in 10 minutes. Your Cache
Module board needs to be serviced."
::= { cpqDaAccelEntry 6 }
cpqDaAccelReadErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Module Board Read Errors.
This shows the total number of read memory parity errors that
were detected while reading from the Cache Module board.
The mirrored copy of data on the board can be accessed to
obtain correct data if a memory parity errors occurs.
Memory parity errors occur when the system detects that
information has not been transferred correctly. A parity bit
is included for each byte of information stored in memory.
When the microprocessor reads or writes data, the system
counts the value of the bits in each byte. If a total does
not match the system's expectations, a parity error has
occurred. A bad memory chip, memory corruption, or lack of
refresh may cause memory parity errors."
::= { cpqDaAccelEntry 7 }
cpqDaAccelWriteErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Module Board Write Errors.
This shows the total number of write memory parity errors that
were detected while writing to the Cache Module board.
Write parity errors occur when the system detects that
information has not been transferred to the Cache
Module board correctly. A parity bit is included for
each byte of information stored in memory. When the
microprocessor reads or writes data, the system counts the
value of the bits in each byte. If the total does not match
the system's expectations, a parity error has occurred."
::= { cpqDaAccelEntry 8 }
cpqDaAccelCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The condition of the device. This value represents the overall
condition of this cache module."
::= { cpqDaAccelEntry 9 }
cpqDaAccelReadMemory OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Read Cache Memory.
This shows the amount of memory allocated for the read cache in
kilobytes. Because data is kept in duplicate (mirrored), the
actual amount of usable memory is half the amount shown.
Read cache is not available on IDA, IDA-2, IDA Expansion System,
or SMART controllers. Entries for these controllers will return
0 for this value."
::= { cpqDaAccelEntry 10 }
cpqDaAccelSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Module Serial Number.
The serial number of the Cache Module. This field will
be a null (size 0) string if the cache module does not support
serial number."
::= { cpqDaAccelEntry 11 }
cpqDaAccelTotalMemory OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total Cache Memory.
This value is the total amount of cache module memory in
kilobytes, including both battery-backed and non-battery-backed
memory."
::= { cpqDaAccelEntry 12 }
cpqDaAccelReadCachePercent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Read Cache Percent.
This shows the percent of cache memory allocated for read ahead
caching. If the data cannot be determined or is not applicable,
the value is set to 4,294,967,295."
::= { cpqDaAccelEntry 13 }
cpqDaAccelWriteCachePercent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Write Cache Percent.
This shows the percent of cache memory allocated for posted
write caching. If the data cannot be determined or is not
applicable, the value is set to 4,294,967,295."
::= { cpqDaAccelEntry 14 }
cpqDaAccelFailedBatteries OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Module Failed Batteries.
This lists the location of cache module failed batteries.
Each octet present contains the position number of a failed
battery. An octet string of length zero indicates that there
are no failed batteries or that the controller does not have
the ability to identify individual failed batteries."
::= { cpqDaAccelEntry 15 }
cpqDaAccelBackupPowerSource OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
battery(2),
capacitor(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Module Board Backup Power Source.
This describes the backup power source being used by the Cache
Module board.
The status can be:
Other (1)
Indicates that the instrument agent does not recognize the backup
power source used by the Cache Module board. You may need
to upgrade the instrument agent.
Battery (2)
Indicates that a battery is the backup power source for the Cache
Module board.
Capacitor (3)
Indicates that a capacitor is the backup power source for the
Cache Module board."
::= { cpqDaAccelEntry 16 }
cpqDaAccelBoardCurrentTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Module Board Current Temperature.
This is the temperature of the cache module board in degrees
Celsius. The field will contain -1 if the cache module
board temperature cannot be calculated or if the controller does not
support reporting cache module board temperature."
::= { cpqDaAccelEntry 17 }
cpqDaAccelCapacitorCurrentTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Module Capacitor Current Temperature.
This is the temperature of the Super-Cap in degrees Celsius.
The field will contain -1 if the Super-Cap temperature
cannot be calculated or if the controller does not support reporting
Super-Cap temperature."
::= { cpqDaAccelEntry 18 }
cpqDaAccelMemoryDataWidth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Memory Data Width.
This is the memory data width (in bits), for the attached cache
module. The field will contain -1 if the memory data width cannot
be calculated or if the controller does not support reporting memory
data width."
::= { cpqDaAccelEntry 19 }
cpqDaAccelMemoryTransferRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Memory Transfer Rate.
This is the memory transfer rate in megatransfers per second (MT/s),
for the attached cache module . The field will contain -1 if the
memory transfer rate cannot be calculated or if the controller does
not support reporting memory transfer rate."
::= { cpqDaAccelEntry 20 }
-- ****************************************************************************
-- Drive Array Managed Cable Table
-- ====================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaCntlr Group (1.3.6.1.4.1.232.3.2.2)
-- cpqDaManagedCableTable (1.3.6.1.4.1.232.3.2.2.3)
--
-- ****************************************************************************
cpqDaManagedCableTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaManagedCableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Managed Cable Table."
::= { cpqDaCntlr 3 }
cpqDaManagedCableEntry OBJECT-TYPE
SYNTAX CpqDaManagedCableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Managed Cable Entry."
INDEX { cpqDaManagedCableCntlrIndex }
::= { cpqDaManagedCableTable 1 }
CpqDaManagedCableEntry ::= SEQUENCE
{
cpqDaManagedCableIndex INTEGER,
cpqDaManagedCableCntlrIndex INTEGER,
cpqDaManagedCableHostConnector DisplayString,
cpqDaManagedCableStatus INTEGER,
cpqDaManagedCableFaultCode INTEGER,
cpqDaManagedCableVendorRevision DisplayString,
cpqDaManagedCableVendorSerialNumber DisplayString,
cpqDaManagedCableVendorPartNumber DisplayString,
cpqDaManagedCableLength INTEGER
}
cpqDaManagedCableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Managed Cable Index.
This index identifies a controller and managed cable association.
This index uniquely identifies a single managed cable connected to a
controller."
::= { cpqDaManagedCableEntry 1 }
cpqDaManagedCableCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Managed Cable Controller Index.
This value maps the managed cables into their respective controllers.
This value is a logical number whose meaning is OS dependent. The
value has a direct mapping to the controller table index such that
controller 'i' has managed cable controller index 'i'."
::= { cpqDaManagedCableEntry 2 }
cpqDaManagedCableHostConnector OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Managed Cable Host Connector.
This is the port connector to which the managed cable is attached.
If the host connector cannot be determined, the agent will return a
NULL string."
::= { cpqDaManagedCableEntry 3 }
cpqDaManagedCableStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
nonFatalFault(3),
fatalFault(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Managed Cable Status.
The following values are defined:
Other (1)
Indicates that the instrument agent can not determine the
managed cable status.
Ok (2)
Indicates the cable is functioning properly.
Non Fatal Fault (3)
Indicates the cable has reported a non fatal fault. See
cpqDaManagedCableFaultCode for more information.
Fatal Fault (4)
Indicates the cable has reported a fatal fault. See
cpqDaManagedCableFaultCode for more information."
::= { cpqDaManagedCableEntry 4 }
cpqDaManagedCableFaultCode OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
none(2),
linkFault(3),
noComWithCableMgmtInterface(4),
cannotConfigureCable(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Managed Cable Fault Code.
The following values are defined:
Other (1)
Indicates that the instrument agent can not determine the
managed cable fault code.
None (2)
Indicates that no cable fault codes have been reported.
Link Fault (3)
Indicates that the cable is reporting a non fatal link fault.
No Communication With Cable's Management Interface (4)
Indicates that Smart Array firmware could not communicate with the
cable's management interface.
Cannot Configure Cable (5)
Indicates that Smart Array firmware could not configure the cable
and has disabled it."
::= { cpqDaManagedCableEntry 5 }
cpqDaManagedCableVendorRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Managed Cable Vendor Revision.
Indicates the vendor revision of the managed cable. If the managed
cable does not support vendor revision, the instrument agent will
return a NULL string."
::= { cpqDaManagedCableEntry 6 }
cpqDaManagedCableVendorSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Managed Cable Vendor Serial Number.
Indicates the vendor serial number of the managed cable. If the
managed cable does not support vendor serial number, the instrument
agent will return a NULL string."
::= { cpqDaManagedCableEntry 7 }
cpqDaManagedCableVendorPartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Managed Cable Vendor Part Number.
Indicates the vendor part number of the managed cable. If the managed
cable does not support vendor part number, the instrument agent
will return a NULL string."
::= { cpqDaManagedCableEntry 8 }
cpqDaManagedCableLength OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Managed Cable Length.
Indicates the length of the managed cable in meters. This field will
contain -1 if the cable length cannot be determined or if the managed
cable does not support reporting cable length."
::= { cpqDaManagedCableEntry 9 }
-- ****************************************************************************
-- Drive Array Logical Drive Table
-- ===============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaLogDrv Group (1.3.6.1.4.1.232.3.2.3)
-- cpqDaLogDrvTable (1.3.6.1.4.1.232.3.2.3.1)
--
-- The cpqDaLogDrv group contains configuration and statistical
-- information about the logical drives associated with drive array
-- controllers.
--
-- Implementation of the cpqDaLogDrv group is mandatory for all agents
-- that support the Drive Array MIB.
--
-- ****************************************************************************
cpqDaLogDrvTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaLogDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Table.
A table of logical drive entries."
::= { cpqDaLogDrv 1 }
cpqDaLogDrvEntry OBJECT-TYPE
SYNTAX CpqDaLogDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Entry.
A logical drive entry."
INDEX { cpqDaLogDrvCntlrIndex, cpqDaLogDrvIndex }
::= { cpqDaLogDrvTable 1 }
CpqDaLogDrvEntry ::= SEQUENCE
{
cpqDaLogDrvCntlrIndex INTEGER,
cpqDaLogDrvIndex INTEGER,
cpqDaLogDrvFaultTol INTEGER,
cpqDaLogDrvStatus INTEGER,
cpqDaLogDrvAutoRel INTEGER,
cpqDaLogDrvRebuildBlks Counter,
cpqDaLogDrvHasAccel INTEGER,
cpqDaLogDrvAvailSpares OCTET STRING,
cpqDaLogDrvSize INTEGER,
cpqDaLogDrvPhyDrvIDs OCTET STRING,
cpqDaLogDrvCondition INTEGER,
cpqDaLogDrvPercentRebuild Gauge,
cpqDaLogDrvStripeSize INTEGER,
cpqDaLogDrvOsName DisplayString,
cpqDaLogDrvBlinkTime Counter,
cpqDaLogDrvSpareReplaceMap OCTET STRING,
cpqDaLogDrvRebuildingPhyDrv INTEGER,
cpqDaLogDrvMultipathAccess INTEGER,
cpqDaLogDrvNmbrOfParityGroups INTEGER,
cpqDaLogDrvSplitMirrorBackupLogDrv INTEGER,
cpqDaLogDrvCacheVolAccelAssocType INTEGER,
cpqDaLogDrvCacheVolIndex INTEGER,
cpqDaLogDrvRPIPercentComplete Gauge,
cpqDaLogDrvSSDSmartPathStatus INTEGER,
cpqDaLogDrvEncryptionStatus INTEGER
}
cpqDaLogDrvCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Controller Index.
This maps the logical drives into their respective controllers.
Controller index 'i' under the controller group owns the
associated drives in the logical drive group which use that
index."
::= { cpqDaLogDrvEntry 1 }
cpqDaLogDrvIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Index.
This logical drive number keeps track of multiple instances of
logical drives which are on the same controller. For each
controller index value, the logical drive index starts at 1 and
increments for each logical drive."
::= { cpqDaLogDrvEntry 2 }
cpqDaLogDrvFaultTol OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
none(2),
mirroring(3),
dataGuard(4),
distribDataGuard(5),
advancedDataGuard(7),
raid50 (8),
raid60 (9),
raid1Adm (10),
raid10Adm (11)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive Fault Tolerance.
This shows the fault tolerance mode of the logical drive.
The following values are valid for the Logical Drive Fault
Tolerance:
None (2)
Fault tolerance is not enabled. If a physical drive reports
an error, the data cannot be recovered by the drive array
controller.
Mirroring - RAID 1/RAID 1+0 (3)
For each physical drive, there is a second physical drive
containing identical data. If a drive fails, the data can be
retrieved from the mirror drive.
Data Guard - RAID 4 (4)
One of the physical drives is used as a data guard drive and
contains the exclusive OR of the data on the remaining drives.
If a failure is detected, the drive array controller rebuilds
the data using the data guard information plus information
from the other drives.
Distributed Data Guard - RAID 5 (5)
Distributed Data Guarding, sometimes referred to as RAID 5,
is similar to Data Guarding, but instead of storing the parity
information on one drive, the information is distributed across
all of the drives. If a failure is detected, the drive array
controller rebuilds the data using the data guard information
from all the drives.
Advanced Data Guarding - RAID 6 (7)
Advanced Data Guarding (RAID ADG) is the fault tolerance method
that provides the highest level of data protection. It
'stripes' data and parity across all the physical drives in the
configuration to ensure the uninterrupted availability of
uncorrupted data. This fault-tolerance method is similar to
distributed data guard (RAID 5) in that parity data is
distributed across all drives in the array, except in RAID ADG
the capacity of multiple drives is used to store parity data.
Assuming the capacity of 2 drives is used for parity data,
this allows continued operation despite simultaneous failure of
any 2 drives in the array, whereas RAID 4 and RAID 5 can only
sustain failure of a single drive.
RAID 50 (8)
Distributed data guarding (RAID 5) with multiple parity groups.
RAID 60 (9)
Advanced data guarding (RAID 6) with multiple parity groups.
RAID 1 ADM (10) - Advanced Data Mirroring -
For each physical drive, there are two or more physical drives
containing identical data. If a drive fails, the data can be
retrieved from any of the mirrored drives.
RAID 10 ADM (11) - Advanced Data Mirroring with Striping -
For each physical drive, there are two or more physical drives
containing identical data in addition to data being striped across
multiple drives. If a drive fails, the data can be retrieved from
any of the mirrored drives."
::= { cpqDaLogDrvEntry 3 }
cpqDaLogDrvStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
failed(3),
unconfigured(4),
recovering(5),
readyForRebuild(6),
rebuilding(7),
wrongDrive(8),
badConnect(9),
overheating(10),
shutdown(11),
expanding(12),
notAvailable(13),
queuedForExpansion(14),
multipathAccessDegraded(15),
erasing(16),
predictiveSpareRebuildReady(17),
rapidParityInitInProgress(18),
rapidParityInitPending(19),
noAccessEncryptedNoCntlrKey(20),
unencryptedToEncryptedInProgress(21),
newLogDrvKeyRekeyInProgress(22),
noAccessEncryptedCntlrEncryptnNotEnbld(23),
unencryptedToEncryptedNotStarted(24),
newLogDrvKeyRekeyRequestReceived(25)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive Status.
The logical drive can be in one of the following states:
Ok (2)
Indicates that the logical drive is in normal operation mode.
Failed (3)
Indicates that more physical drives have failed than the
fault tolerance mode of the logical drive can handle without
data loss.
Unconfigured (4)
Indicates that the logical drive is not configured.
Recovering (5)
Indicates that the logical drive is using Interim Recovery Mode.
In Interim Recovery Mode, at least one physical drive has
failed, but the logical drive's fault tolerance mode lets the
drive continue to operate with no data loss.
Ready Rebuild (6)
Indicates that the logical drive is ready for Automatic Data
Recovery. The physical drive that failed has been replaced,
but the logical drive is still operating in Interim Recovery
Mode.
Rebuilding (7)
Indicates that the logical drive is currently doing Automatic
Data Recovery. During Automatic Data Recovery, fault tolerance
algorithms restore data to the replacement drive.
Wrong Drive (8)
Indicates that the wrong physical drive was replaced after a
physical drive failure.
Bad Connect (9)
Indicates that a physical drive is not responding.
Overheating (10)
Indicates that the drive array enclosure that contains the
logical drive is overheating. The drive array is still
functioning, but should be shutdown.
Shutdown (11)
Indicates that the drive array enclosure that contains the
logical drive has overheated. The logical drive is no longer
functioning.
Expanding (12)
Indicates that the logical drive is currently undergoing a
transformation (expansion, shrinkage or movement). During
transformation, fault tolerance algorithms redistribute logical
drive data according to the transformation operation selected.
Not Available (13)
Indicates that the logical drive is currently unavailable.
If a logical drive is expanding and the new configuration
frees additional disk space, this free space can be
configured into another logical volume. If this is done,
the new volume will be set to not available.
Queued For Expansion (14)
Indicates that the logical drive is ready for transformation
(expansion, shrinkage or movement). The logical drive is in the
queue for transformation.
Multi-path Access Degraded (15)
Indicates that previously all disk drives of this logical
drive had more than one I/O path to the controller, but now
one or few of them have only one I/O path.
Erasing (16)
Indicates that the logical drive is currently being erased.
Predictive Spare Rebuild Ready (17)
Indicates that the logical drive is ready to perform a predictive
spare rebuild. The logical drive is in the queue for rebuild.
Rapid Parity Initialization In Progress (18)
Indicates that the logical drive is currently undergoing rapid
parity initialization (RPI). The logical drive is unavailable to the
operating system during RPI and will be made available once RPI
has completed.
Rapid Parity Initialization Pending (19)
Indicates that the logical drive is currently pending rapid
parity initialization and will be unavailable.
No Access - Encrypted - Missing Key (20)
Indicates that the logical drive is currently encrypted and cannot
be accessed because the array controller has not yet received the
encryption key from iLO nor was it found in the controller's CSP
NVRAM.
Unencrypted to Encrypted Transformation in Progress (21)
Indicates that the logical drive is currently being transformed from
unencrypted to encrypted and the volume is online. Data will be
written unencrypted if the write is directed to an LBA range on the
logical drive that has not yet been migrated.
New Logical Drive Key Rekey in Progress (22)
Indicates that the logical drive is currently encrypted and all data
is currently being rekeyed with a new logical drive key using the
background capacity expansion transformation task. The logical drive
is online.
No Access - Encrypted with Controller Encryption Not Enabled (23)
Indicates that the logical drive is currently encrypted and cannot
be accessed because the array controller does not have encryption
enabled.
Unencrypted To Encrypted Transformation Not Started (24)
Indicates that the logical drive has received a request to transform
from unencrypted to encrypted but this process has not yet started.
The unencrypted logical drive is currently online.
New Logical Drive Key Rekey Request Received (25)
Indicates that the logical drive is encrypted and has received
a request to rekey all data with a new logical drive encryption key.
The logical drive is online."
::= { cpqDaLogDrvEntry 4 }
cpqDaLogDrvAutoRel OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Array Controller Logical Drive Auto-Reliability Delay.
This value indicates how many seconds the logical drive will wait
with no requests before beginning Auto-Reliability monitoring.
For example, the default value is five, so the logical drive will
begin Auto-Reliability monitoring if it receives no requests for
five seconds. If the value is zero, the logical drive will not
perform Auto-Reliability monitoring. Auto-Reliability only
operates if the logical drive is configured in one of the fault
tolerance modes.
If the logical drive receives a request while performing
Auto-Reliability monitoring, the drive will stop monitoring to
process the request. Once it has satisfied all incoming requests,
the drive will wait for the Auto-Reliability delay to expire
before returning to Auto-Reliability monitoring.
Auto-Reliability monitoring is a process to insure the highest
level of data reliability. In this process each disk is scanned
to verify that all of the sectors in the drive array are
readable. If the Auto-Reliability monitoring process detects
any bad sectors on the drives, it automatically remaps these
bad sectors where possible."
::= { cpqDaLogDrvEntry 5 }
cpqDaLogDrvRebuildBlks OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Logical Drive Rebuild Blocks Remaining.
After a failed physical drive has been replaced, the physical
drive must have its data rebuilt. This value shows how many
blocks of data still need to be rebuilt. When the value
reaches zero, the rebuilding process is complete. The drive
array continues to operate in interim recovery mode while a
drive is rebuilding.
When a logical volume is Expanding, the drive must redistribute
the logical volume data across the physical drives. This value
shows how many blocks of data still need to be redistributed.
When the value reaches zero, the expand process is complete.
The drive array continues to operate normally while the drive
is expanding.
This value is only valid if the Logical Drive Status is
rebuilding (7) or expanding (12)."
::= { cpqDaLogDrvEntry 6 }
cpqDaLogDrvHasAccel OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
unavailable(2),
enabled(3),
disabled(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive Has Cache Module Board.
This indicates whether the logical drive has a Cache Module
board configured and enabled. The following values are valid:
Other (1)
Indicates that the instrument agent does not recognize the
Cache Module board. You may need to upgrade your software.
Unavailable (2)
Indicates that there is no Cache Module board configured
for this logical drive.
Enabled (3)
Indicates that the Cache Module board is configured and
enabled for this logical drive.
Disabled (4)
Indicates that the Cache Module board is configured but
not enabled for this logical drive."
::= { cpqDaLogDrvEntry 7 }
cpqDaLogDrvAvailSpares OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Drive Array Logical Drive Available Spares.
This indicates if this logical drive has one or more spares
designated for it that are not currently in use by another drive.
Each octet present will be a physical drive ID that is an
available spare for this logical drive. These are the same ID's
which can be used as indices into the physical drive table.
An octet string of length zero indicates that there are no
available spares for this logical drive. For array controllers
that support a larger number of drives, the Drive Array Logical
Drive Available Spare Extended Attachment Table should be used."
::= { cpqDaLogDrvEntry 8 }
cpqDaLogDrvSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive Size.
This is the size of the logical drive in megabytes. This value
is calculated using the value 1,048,576 (2^20) as a megabyte.
Drive manufacturers sometimes use the number 1,000,000 as a
megabyte when giving drive capacities so this value may
differ from the advertised size of a drive."
::= { cpqDaLogDrvEntry 9 }
cpqDaLogDrvPhyDrvIDs OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Drive Array Logical Drive Physical Drive IDs.
This lists the physical drive IDs which are associated with this
logical drive. These are the same IDs which can be used as
indices into the physical drive table. Each byte of the string
is an index. For array controllers that support a larger number
of drives, the Drive Array Logical Drive Extended Physical
Drive Attachment Table should be used to determine drive
associations."
::= { cpqDaLogDrvEntry 10 }
cpqDaLogDrvCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Logical Drive condition.
This value represents the overall condition of this logical drive and
any associated physical drives."
::= { cpqDaLogDrvEntry 11 }
cpqDaLogDrvPercentRebuild OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive Percent Rebuild.
After a failed physical drive has been replaced, the physical
drive must have its data rebuilt. This value is the percent
complete of the rebuild. When the value reaches 100, the
rebuilding process is complete. The drive array continues to
operate in interim recovery mode while a drive is rebuilding.
When a logical volume is Expanding, the drive must redistribute
the logical volume data across the physical drives. This value
shows how many blocks of data still need to be redistributed.
When the value reaches one hundred (100), the expand process
is complete. The array continues to operate normally while
the drive is expanding.
When a logical drive's encryption state is transforming from
unencrypted to encrypted or when the logical drive is being rekeyed
with a new key, this value is the percent complete of the operation.
When the value reaches 100, the transformation or rekey process is
complete.
This value is only valid if the logical drive status is
rebuilding (7), expanding (12), unencryptedToEncryptedInProgress(22)
and newLogDrvKeyRekeyInProgress(23).
If the value cannot be determined or a rebuild is not active,
the value is set to 4,294,967,295."
::= { cpqDaLogDrvEntry 12 }
cpqDaLogDrvStripeSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive Stripe Size.
This is the size of a logical drive stripe in kilobytes."
::= { cpqDaLogDrvEntry 13 }
cpqDaLogDrvOsName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive OS Name.
The OS name for this array logical drive. This field will be
a null (size 0) string if the agent does not support OS name."
::= { cpqDaLogDrvEntry 14 }
cpqDaLogDrvBlinkTime OBJECT-TYPE
SYNTAX Counter
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Logical Drive Physical Drive Blink Time Count.
The logical drive blink time variable allows the drive tray LEDs
of all physical drives in a logical drive to blink. This value
indicates the amount of time, in tenths of a second, that the
physical drive LEDs will continue to blink. A value of zero
indicates the drive LEDs are not blinking. If the value cannot
be determined or no drive in this logical drive is in a hot
plug tray, 4,294,967,295 is returned.
To blink the drive LEDs on all physical drives in this logical
drive (including any configured spare drives), set this value
to the time to blink in tenths of seconds.
To stop the drive LEDs from blinking, set this value to 0."
::= { cpqDaLogDrvEntry 15 }
cpqDaLogDrvSpareReplaceMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Logical Drive Spare To Replacement Drive Map.
This data structure contains the spare to physical drive
replacement map. The format is:
octet contents
===== ========
1 Spare drive physical drive index
2 Replaced drive physical drive index
These 2 octets are repeated for each replaced drive. For n
replaced drives, the string is 2 * n octets long. An octet
string of length zero indicates that there are no replaced
drives currently in use. For array controllers that support
larger number of drives, the Drive Array Logical Drive
Spare Replacement Extended Attachment Table should be used."
::= { cpqDaLogDrvEntry 16 }
cpqDaLogDrvRebuildingPhyDrv OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive Physical Drive Rebuilding Index.
This is the physical drive index of the physical drive that is
currently rebuilding. If the value cannot be determined or is
not applicable, the value is set to -1."
::= { cpqDaLogDrvEntry 17 }
cpqDaLogDrvMultipathAccess OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notSupported(2),
notConfigured(3),
pathRedundant(4),
noRedundantPath(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive Multi-path Access.
This indicates whether all the physical disks including spares
of this logical drive have been configured to have and currently
still have more than one I/O path to the controller. The
following values are valid:
Other (1)
Indicates that the instrument agent can not determine if this
logical drive has multi-path access.
Not Supported (2)
Indicates that multi-path access to this logical drive is not
supported.
Not Configured (3)
Indicates that this logical drive is not configured to have
multi-path access.
Path Redundant (4)
Indicates that all disks of this logical drive currently have
more than one I/O path to the controller.
No Redundant Path (5)
Indicates that all disks of this logical drive previously had
more than one I/O path to the controller, but now one or few
of them have no redundant I/O path."
::= { cpqDaLogDrvEntry 18 }
cpqDaLogDrvNmbrOfParityGroups OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive Number Of Parity Groups.
Indicates the number of parity groups (i.e. RAID 4/5/6 subvolumes),
that are being striped across."
::= { cpqDaLogDrvEntry 19 }
cpqDaLogDrvSplitMirrorBackupLogDrv OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
isNotBackupLogicalDrive(2),
isBackupLogicalDrive(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive Split Mirror Backup Logical Drive.
Indicates if this logical drive is a backup logical drive
belonging to a split mirror.
The following values are defined:
other(1)
The instrument agent is unable to determine if this logical drive
is a backup logical drive. You may need to upgrade the instrument
agent.
isNotBackupLogicalDrive(2)
The logical drive is not a backup logical drive.
isBackupLogicalDrive(3)
The logical drive is a backup logical drive."
::= { cpqDaLogDrvEntry 20 }
cpqDaLogDrvCacheVolAccelAssocType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
nonMember(2),
logicalDriveMember(3),
cacheVolumeMember(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive Cache Volume Accelerator Association Type.
Indicates the way in which this logical drive is associated with a
cache volume accelerator group.
The following values are defined:
Other(1)
The instrument agent is unable to determine if this logical drive
is part of a cache volume accelerator group. Logical drive cache
volume acceleration may not be enabled on this controller or you
may need to upgrade the instrument agent.
Non Member (2)
Indicates that this logical drive is not a member of a cache volume
accelerator group.
Logical Drive Member(3)
This logical drive is using a cache volume.
Cache Volume Member(4)
This logical drive is being utilized as a cache volume."
::= { cpqDaLogDrvEntry 21 }
cpqDaLogDrvCacheVolIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive Cache Volume Index.
The logical drive index of the cache volume used by this logical
drive. The value of this index is the same as the logical drive index
used in the cache volume accelerator table. If the value cannot be
determined or is not applicable, the value is set to -1."
::= { cpqDaLogDrvEntry 22 }
cpqDaLogDrvRPIPercentComplete OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive Rapid Parity Initialization Percent Complete.
When a fault tolerant logical volume is created, parity data for
the volume must be initialized. This value is the percent complete
of the rapid parity initialization (RPI) process. When the value
reaches 100, the RPI process is complete and the logical drive is
made available to the operating system.
If the value cannot be determined or rapid parity initialization
is not active, the value is set to 4,294,967,295."
::= { cpqDaLogDrvEntry 23 }
cpqDaLogDrvSSDSmartPathStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
updateDriver(2),
ssdSmartPathDisabled(3),
ssdSmartPathEnabled(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive SSD Smart Path Status.
Indicates the logical drive SSD Smart Path status. An SSD Smart Path
for a logical drive can be utilized only when both the Smart
Array firmware and Smart Array controller driver support such a path.
The following values are defined:
Other (1)
Indicates that the instrument agent can not determine the
logical drive's SSD Smart Path status.
Update Driver (2)
Indicates that an updated Smart Array controller driver is needed
in order for the SSD Smart Path to be supported for this logical
drive.
SSD Smart Path Disabled(3)
Indicates that an SSD Smart Path for this logical drive is
disabled. Check Smart Array controller documentation.
SSD Smart Path Enabled(4)
Indicates that an SSD Smart path for this logical drive is
enabled. The Smart Array controller driver is able to use an
SSD Smart Path for this logical drive."
::= { cpqDaLogDrvEntry 24 }
cpqDaLogDrvEncryptionStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
encrypted(2),
notEncrypted(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical Drive Encryption Status.
Indicates the logical drive encryption status.
The following values are defined:
Other (1)
Indicates that the instrument agent can not determine the
logical drive's encyption status.
Encrypted (2)
Indicates that data-at-rest encryption is enabled for this logical
drive.
Not Encrypted(3)
Indicates that data-at-rest encryption is not enabled for this
logical drive."
::= { cpqDaLogDrvEntry 25 }
-- ****************************************************************************
-- Drive Array Logical Drive Physical Drive Extended Attachment Table
-- =====================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaLogDrv Group (1.3.6.1.4.1.232.3.2.3)
-- cpqDaLogDrvPhyDrvExtAttachTable (1.3.6.1.4.1.232.3.2.3.2)
--
-- ****************************************************************************
cpqDaLogDrvPhyDrvExtAttachTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaLogDrvPhyDrvExtAttachEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Physical Drive Extended Attachment
Table.
A table of logical drives and their associated physical drives."
::= { cpqDaLogDrv 2 }
cpqDaLogDrvPhyDrvExtAttachEntry OBJECT-TYPE
SYNTAX CpqDaLogDrvPhyDrvExtAttachEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Extended Physical Drive Attachment
Entry."
INDEX { cpqDaLogDrvPhyDrvAttachExtIndex }
::= { cpqDaLogDrvPhyDrvExtAttachTable 1 }
CpqDaLogDrvPhyDrvExtAttachEntry ::= SEQUENCE
{
cpqDaLogDrvPhyDrvAttachExtIndex INTEGER,
cpqDaLogDrvCntlrExtended INTEGER,
cpqDaLogDrvLogDrvExtended INTEGER,
cpqDaLogDrvPhyDrvExtended INTEGER
}
cpqDaLogDrvPhyDrvAttachExtIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Extended Attach Index.
This index identifies a controller, logical drive and
physical drive connection. This index uniquely identifies
a connection for each attached hard drive."
::= { cpqDaLogDrvPhyDrvExtAttachEntry 1 }
cpqDaLogDrvCntlrExtended OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Controller Extended.
This maps the logical drives into their respective controllers. This
value is a logical number whose meaning is OS dependent. The value
has a direct mapping to the controller table index such that
controller 'i' has logical drive controller extended table entry
'i'."
::= { cpqDaLogDrvPhyDrvExtAttachEntry 2 }
cpqDaLogDrvLogDrvExtended OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Extended.
This logical drive number keeps track of multiple instances of
logical drives which are on the same controller. For each
controller value, the logical drive value starts at 1 and
increments for each logical drive."
::= { cpqDaLogDrvPhyDrvExtAttachEntry 3 }
cpqDaLogDrvPhyDrvExtended OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Physical Drive Extended.
This value is used for selecting the physical drive number in
the table entry. This number keeps track of multiple instances of
physical drives which are on the same controller."
::= { cpqDaLogDrvPhyDrvExtAttachEntry 4 }
-- ****************************************************************************
-- Drive Array Logical Drive Spare Replacement Extended Attachment Table
-- =====================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaLogDrv Group (1.3.6.1.4.1.232.3.2.3)
-- cpqDaLogDrvSprRplcExtAttachTable (1.3.6.1.4.1.232.3.2.3.3)
--
-- ****************************************************************************
cpqDaLogDrvSprRplcExtAttachTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaLogDrvSprRplcExtAttachEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Spare Replacement Extended Attachment
Table.
A table of logical drives, physical drives and their replacement
drives. If spare drives are not used, this table will not be
populated."
::= { cpqDaLogDrv 3 }
cpqDaLogDrvSprRplcExtAttachEntry OBJECT-TYPE
SYNTAX CpqDaLogDrvSprRplcExtAttachEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Spare Replacement Extended Attachment
Entry."
INDEX { cpqDaLogDrvSprRplcAttachExtIndex }
::= { cpqDaLogDrvSprRplcExtAttachTable 1 }
CpqDaLogDrvSprRplcExtAttachEntry ::= SEQUENCE
{
cpqDaLogDrvSprRplcAttachExtIndex INTEGER,
cpqDaLogDrvSprRplcCntlrExtended INTEGER,
cpqDaLogDrvSprRplcLogDrvExtended INTEGER,
cpqDaLogDrvSprRplcReplacedPhysDrvExtended INTEGER,
cpqDaLogDrvSprRplcSparePhysDrvExtended INTEGER
}
cpqDaLogDrvSprRplcAttachExtIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Spare Replacment Extended Attach Index.
This index uniquely identifies a controller, logical drive, physical drive
and replacement drive connection."
::= { cpqDaLogDrvSprRplcExtAttachEntry 1 }
cpqDaLogDrvSprRplcCntlrExtended OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Spare Replacement Controller Extended.
This value maps the spare replacement drives into their respective
controllers. This value is a logical number whose meaning is OS
dependent. The value has a direct mapping to the controller table
index such that controller 'i' has spare replacement controller
extended table entry 'i'.."
::= { cpqDaLogDrvSprRplcExtAttachEntry 2 }
cpqDaLogDrvSprRplcLogDrvExtended OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Spare Replace Logical Drive Extended.
This logical drive number keeps track of multiple instances of
logical drives which are on the same controller. For each
controller value, the logical drive value starts at 1 and
increments for each logical drive."
::= { cpqDaLogDrvSprRplcExtAttachEntry 3 }
cpqDaLogDrvSprRplcReplacedPhysDrvExtended OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Spare Replace Replaced Physical
Drive Extended.
This is the replaced drive physical drive number."
::= { cpqDaLogDrvSprRplcExtAttachEntry 4 }
cpqDaLogDrvSprRplcSparePhysDrvExtended OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Spare Replace Spare Physical
Drive Extended.
This is the replacement spare physical drive number."
::= { cpqDaLogDrvSprRplcExtAttachEntry 5 }
-- ****************************************************************************
-- Drive Array Logical Drive Available Spare Extended Attachment Table
-- =====================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaLogDrv Group (1.3.6.1.4.1.232.3.2.3)
-- cpqDaLogDrvAvalSprExtAttachTable (1.3.6.1.4.1.232.3.2.3.4)
--
-- ****************************************************************************
cpqDaLogDrvAvalSprExtAttachTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaLogDrvAvalSprExtAttachEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Available Spare Extended Attachment
Table.
A table of logical drives and their available spare drives. This
table indicates when a logical drive has one or more spare drives
designated for it. This table will not be populated when available
spares are not being used."
::= { cpqDaLogDrv 4 }
cpqDaLogDrvAvalSprExtAttachEntry OBJECT-TYPE
SYNTAX CpqDaLogDrvAvalSprExtAttachEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Available Spare Extended Attachment
Entry."
INDEX { cpqDaLogDrvAvailSprAttachExtIndex }
::= { cpqDaLogDrvAvalSprExtAttachTable 1 }
CpqDaLogDrvAvalSprExtAttachEntry ::= SEQUENCE
{
cpqDaLogDrvAvailSprAttachExtIndex INTEGER,
cpqDaLogDrvAvailSprCntlrExtended INTEGER,
cpqDaLogDrvAvailSprLogDrvExtended INTEGER,
cpqDaLogDrvAvailSprAvailableSpareExtended INTEGER
}
cpqDaLogDrvAvailSprAttachExtIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Available Spare Extended Attach Index.
This index uniquely identifies a controller, logical drive and available
spare drive connection."
::= { cpqDaLogDrvAvalSprExtAttachEntry 1 }
cpqDaLogDrvAvailSprCntlrExtended OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Available Spare Controller Extended.
This value maps the available spare drives into their respective
controllers This value is a logical number whose meaning is OS
dependent. The value has a direct mapping to the controller table
index such that controller 'i' has available spare controller
extended table entry 'i'.."
::= { cpqDaLogDrvAvalSprExtAttachEntry 2 }
cpqDaLogDrvAvailSprLogDrvExtended OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Available Spare Logical Drive Extended.
This logical drive number keeps track of multiple instances of
logical drives which are on the same controller. For each
controller value, the logical drive value starts at 1 and
increments for each logical drive."
::= { cpqDaLogDrvAvalSprExtAttachEntry 3 }
cpqDaLogDrvAvailSprAvailableSpareExtended OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Available Spare Available Spare Extended.
This is the available spare drive number assigned to one or more
logical drives."
::= { cpqDaLogDrvAvalSprExtAttachEntry 4 }
-- ****************************************************************************
-- Drive Array Logical Drive Cache Volume Accelerator Table
-- =====================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaLogDrv Group (1.3.6.1.4.1.232.3.2.3)
-- cpqDaLogDrvCacheVolumeAccelTable (1.3.6.1.4.1.232.3.2.3.5)
--
-- ****************************************************************************
cpqDaLogDrvCacheVolumeAccelTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaLogDrvCacheVolumeAccelEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Table.
The cpqDaLogDrvCacheVolumeAccelTable table contains configuration
and statistical information about cache volumes. This table will not
be populated when logical drive cache volumes are not being used."
::= { cpqDaLogDrv 5 }
cpqDaLogDrvCacheVolumeAccelEntry OBJECT-TYPE
SYNTAX CpqDaLogDrvCacheVolumeAccelEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Entry.
A cache volume entry."
INDEX { cpqDaLogDrvCacheVolAccelCntlrIndex, cpqDaLogDrvCacheVolAccelLogDrvIndex }
::= { cpqDaLogDrvCacheVolumeAccelTable 1 }
CpqDaLogDrvCacheVolumeAccelEntry ::= SEQUENCE
{
cpqDaLogDrvCacheVolAccelCntlrIndex INTEGER,
cpqDaLogDrvCacheVolAccelLogDrvIndex INTEGER,
cpqDaLogDrvCacheVolAccelCachingAlgorithm INTEGER,
cpqDaLogDrvCacheVolAccelCacheState INTEGER,
cpqDaLogDrvCacheVolAccelWritePolicy INTEGER,
cpqDaLogDrvCacheVolAccelNoOfReadHitsH INTEGER,
cpqDaLogDrvCacheVolAccelNoOfReadHits INTEGER,
cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoadH INTEGER,
cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoad INTEGER,
cpqDaLogDrvCacheVolAccelNoOfReadMissLoadingH INTEGER,
cpqDaLogDrvCacheVolAccelNoOfReadMissLoading INTEGER,
cpqDaLogDrvCacheVolAccelNoOfReadMissSkipH INTEGER,
cpqDaLogDrvCacheVolAccelNoOfReadMissSkip INTEGER,
cpqDaLogDrvCacheVolAccelReadCacheHitRate Gauge,
cpqDaLogDrvCacheVolAccelNoOfWriteHitsH INTEGER,
cpqDaLogDrvCacheVolAccelNoOfWriteHits INTEGER,
cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoadH INTEGER,
cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoad INTEGER,
cpqDaLogDrvCacheVolAccelNoOfWriteMissLoadingH INTEGER,
cpqDaLogDrvCacheVolAccelNoOfWriteMissLoading INTEGER,
cpqDaLogDrvCacheVolAccelNoOfWriteMissSkipH INTEGER,
cpqDaLogDrvCacheVolAccelNoOfWriteMissSkip INTEGER,
cpqDaLogDrvCacheVolAccelWriteCacheHitRate Gauge,
cpqDaLogDrvCacheVolAccelLoadFailures INTEGER,
cpqDaLogDrvCacheVolAccelCacheLineSize INTEGER,
cpqDaLogDrvCacheVolAccelNoOfReadMissLockedH INTEGER,
cpqDaLogDrvCacheVolAccelNoOfReadMissLocked INTEGER,
cpqDaLogDrvCacheVolAccelNoOfWriteMissLockedH INTEGER,
cpqDaLogDrvCacheVolAccelNoOfWriteMissLocked INTEGER,
cpqDaLogDrvCacheVolAccelNoOfReadMissTotalH INTEGER,
cpqDaLogDrvCacheVolAccelNoOfReadMissTotal INTEGER,
cpqDaLogDrvCacheVolAccelNoOfWriteMissTotalH INTEGER,
cpqDaLogDrvCacheVolAccelNoOfWriteMissTotal INTEGER
}
cpqDaLogDrvCacheVolAccelCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Controller Index.
This index maps the cache volume back to the controller to which
it is attached. The value of this index is the same as the index
used under in the controller table."
::= { cpqDaLogDrvCacheVolumeAccelEntry 1 }
cpqDaLogDrvCacheVolAccelLogDrvIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Logical Drive
Index.
The logical drive index for this cache volume. The value of this
index is the same as the logical drive index used in the logical
drive table."
::= { cpqDaLogDrvCacheVolumeAccelEntry 2 }
cpqDaLogDrvCacheVolAccelCachingAlgorithm OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
multiSegment(2),
singleSegment(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Caching Algorithm.
The caching algorithm currently in use for the cache volume.
The following values are defined:
Other(1)
The instrument agent is unable to determine the caching algorithm
for this cache volume. You may need to upgrade the instrument agent.
Multi Segment(2)
Multiple tiers to track cached and potentially cacheable data. The
multi-segment cache takes into account frequency, spatial locality
and temporal locality of data accesses. The replacement policy is
conservative making the algorithm ideal for workloads that have a
mixture of cacheable and non-cacheable data with hot spots that
remain hot for some time.
Single Segment (3)
A single tier tracks cached data. The single-segment cache takes
into account spatial and temporal locality of data accesses. The
replacement policy is very aggressive resulting in the algorithm
being ideal for workloads that have very few non-cacheable data accesses
and hotspots that move frequently."
::= { cpqDaLogDrvCacheVolumeAccelEntry 3 }
cpqDaLogDrvCacheVolAccelCacheState OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
cacheVolOffline(4),
logDriveOffline(5),
neverConfigured(6),
flushing(7),
configuring(8),
cacheConfigurationFailed(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Cache State.
The current cache state of the cache volume.
The following values are defined:
Other(1)
The instrument agent is unable to determine the cache state
of this cache volume. You may need to upgrade the instrument agent.
Ok (2)
Indicates that the cache volume is in normal operation mode and is
fully functional.
Degraded (3)
Indicates that this cache volume is currently degraded with limited
functionality.
Cache Volume Offline(4)
Indicates that the cache volume member is currently offline.
Logical Drive Offline(5)
Indicates that the logical drive member is currently offline.
Never Configured(6)
Indicates that the cache volume was never configured.
Flushing(7)
Indicates that cache data is currently flushing from DDR cache.
Configuring(8)
Indicates that cache is currently configuring.
Cache Configuration Failed(9)
Indicates that cache configuration has failed."
::= { cpqDaLogDrvCacheVolumeAccelEntry 4 }
cpqDaLogDrvCacheVolAccelWritePolicy OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
readOnly(2),
writeThrough(3),
writeBackSafe(4),
writeBackUnsafe(5),
writeThroughNoLoad(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Write Policy.
The write policy that the cache volume has been configured to use.
The following values are defined:
Other(1)
The instrument agent is unable to determine the write policy
of this cache volume. You may need to upgrade the instrument agent.
Read Only (2)
Indicates that this cache volume is currently using a read only
policy.
Write Through(3)
Indicates that this cache volume is currently using a write through
policy.
Write Back Safe(4)
Indicates that this cache volume is currently using a write back
safe policy. Writing is being executed to a cache volume that
utilizes a redundant RAID level. If the cache volume's redundancy
becomes degraded, the cache volume will utilize the write
through write policy until redunancy is restored.
Write Back Unsafe(5)
Indicates that this cache volume is currently using a write back
unsafe policy. Writing is being executed to a cache volume that
is not utilizing a redundant RAID level.
Write Through No Load(6)
Indicates that this cache volume is currently using a write through
no load policy. The cache volume will process write requests but
will only write if the line is already loaded."
::= { cpqDaLogDrvCacheVolumeAccelEntry 5 }
cpqDaLogDrvCacheVolAccelNoOfReadHitsH OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Hits (high).
cpqDaLogDrvCacheVolAccelNoOfReadHitsH and
cpqDaLogDrvCacheVolAccelNoOfReadHits together show the number of read
cache hits for this cache volume. If the value cannot be determined
or is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 6 }
cpqDaLogDrvCacheVolAccelNoOfReadHits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Hits (low).
cpqDaLogDrvCacheVolAccelNoOfReadHits and
cpqDaLogDrvCacheVolAccelNoOfReadHitsH together show the number of read
cache hits for this cache volume. If the value cannot be determined
or is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 7 }
cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoadH OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Do Load (high).
cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoadH and
cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoad together show the number of
times a read cache request for this cache volume was missed and
prompted a load of data from the primary storage to the drive cache.
If the value cannot be determined or is not applicable, it is set
to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 8 }
cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Do Load (low).
cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoad and
cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoadH together show the number
of times a read cache request for this cache volume was missed and
prompted a load of data from the primary storage to the drive cache.
If the value cannot be determined or is not applicable, it is set
to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 9 }
cpqDaLogDrvCacheVolAccelNoOfReadMissLoadingH OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Loading (high).
cpqDaLogDrvCacheVolAccelNoOfReadMissLoadingH and
cpqDaLogDrvCacheVolAccelNoOfReadMissLoading together show the number
of times a read cache request for this cache volume was not serviced
right away because the data was loading. If the value cannot be
determined or is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 10 }
cpqDaLogDrvCacheVolAccelNoOfReadMissLoading OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Loading (low).
cpqDaLogDrvCacheVolAccelNoOfReadMissLoading and
cpqDaLogDrvCacheVolAccelNoOfReadMissLoadingH together show the number
of times a read cache request for this cache volume was not serviced
right away because the data was loading. If the value cannot be
determined or is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 11 }
cpqDaLogDrvCacheVolAccelNoOfReadMissSkipH OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Skip (high).
cpqDaLogDrvCacheVolAccelNoOfReadMissSkipH and
cpqDaLogDrvCacheVolAccelNoOfReadMissSkip together show the number of
times a read cache request for this cache volume was serviced by
primary storage and not the cache volume, exluding those that
triggered loads or where a load was already taking place. If the value
cannot be determined or is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 12 }
cpqDaLogDrvCacheVolAccelNoOfReadMissSkip OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Skip (low).
cpqDaLogDrvCacheVolAccelNoOfReadMissSkip and
cpqDaLogDrvCacheVolAccelNoOfReadMissSkipH together show the number of
times a read cache request for this cache volume was serviced by
primary storage and not the cache volume, exluding those that
triggered loads or where a load was already taking place. If the value
cannot be determined or is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 13 }
cpqDaLogDrvCacheVolAccelReadCacheHitRate OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Read Cache
Hit Rate.
The rate (percentage) that the read cache for this cache volume is
being utilized. If the value cannot be determined or read cache hit
rate is not supported for this cache volume, it is set
to 4,294,967,295."
::= { cpqDaLogDrvCacheVolumeAccelEntry 14 }
cpqDaLogDrvCacheVolAccelNoOfWriteHitsH OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Hits (high).
cpqDaLogDrvCacheVolAccelNoOfWriteHitsH and
cpqDaLogDrvCacheVolAccelNoOfWriteHits together show the number of
write cache hits for this cache volume. If the value cannot be
determined or is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 15 }
cpqDaLogDrvCacheVolAccelNoOfWriteHits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Hits (low).
cpqDaLogDrvCacheVolAccelNoOfWriteHits and
cpqDaLogDrvCacheVolAccelNoOfWriteHitsH together show the number of
write cache hits for this cache volume. If the value cannot be
determined or is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 16 }
cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoadH OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Do Load (high).
cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoadH and
cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoad show the number of times a
write cache request for this cache volume was missed and prompted a
load of data from the primary storage to the drive cache. If the value
cannot be determined or is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 17 }
cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoad OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Do Load (low).
cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoad and
cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoadH show the number of times a
write cache request for this cache volume was missed and prompted a
load of data from the primary storage to the drive cache. If the value
cannot be determined or is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 18 }
cpqDaLogDrvCacheVolAccelNoOfWriteMissLoadingH OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Loading (high).
cpqDaLogDrvCacheVolAccelNoOfWriteMissLoadingH and
cpqDaLogDrvCacheVolAccelNoOfWriteMissLoading show the number of times
a write cache request for this cache volume was not serviced right
away because the data was loading. If the value cannot be determined
or is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 19 }
cpqDaLogDrvCacheVolAccelNoOfWriteMissLoading OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Loading (low).
cpqDaLogDrvCacheVolAccelNoOfWriteMissLoading and
cpqDaLogDrvCacheVolAccelNoOfWriteMissLoadingH show the number of times
a write cache request for this cache volume was not serviced right
away because the data was loading. If the value cannot be determined
or is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 20 }
cpqDaLogDrvCacheVolAccelNoOfWriteMissSkipH OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Skip (high).
cpqDaLogDrvCacheVolAccelNoOfWriteMissSkipH and
cpqDaLogDrvCacheVolAccelNoOfWriteMissSkip together show the number of
times a write cache request for this cache volume was serviced by
primary storage and not the cache volume, exluding those that
triggered loads or where a load was already taking place. If the value
cannot be determined or is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 21 }
cpqDaLogDrvCacheVolAccelNoOfWriteMissSkip OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Skip (low).
cpqDaLogDrvCacheVolAccelNoOfWriteMissSkip and
cpqDaLogDrvCacheVolAccelNoOfWriteMissSkipH together show the number of
times a write cache request for this cache volume was serviced by
primary storage and not the cache volume, exluding those that
triggered loads or where a load was already taking place. If the value
cannot be determined or is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 22 }
cpqDaLogDrvCacheVolAccelWriteCacheHitRate OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Write Cache
Hit Rate.
The rate (percentage) that the write cache for this cache volume is
being utilized. If the value cannot be determined or write cache hit
rate is not supported for this cache volume, it is set
to 4,294,967,295."
::= { cpqDaLogDrvCacheVolumeAccelEntry 23 }
cpqDaLogDrvCacheVolAccelLoadFailures OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Load Failures.
The number of times data failed to load onto this cache volume due
to an error. If the value cannot be determined or is not applicable,
it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 24 }
cpqDaLogDrvCacheVolAccelCacheLineSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Cache Line Size.
cpqDaLogDrvCacheVolAccelCacheLineSize is the cache line size in
number of blocks. If the value cannot be determined or is not
applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 25 }
cpqDaLogDrvCacheVolAccelNoOfReadMissLockedH OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Locked (high).
cpqDaLogDrvCacheVolAccelNoOfReadMissLockedH and
cpqDaLogDrvCacheVolAccelNoOfReadMissLocked together show the number of
times a read cache request for this cache volume was missed due to the
primary LUN being written to. If the value cannot be determined or is
not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 26 }
cpqDaLogDrvCacheVolAccelNoOfReadMissLocked OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Locked (low).
cpqDaLogDrvCacheVolAccelNoOfReadMissLocked and
cpqDaLogDrvCacheVolAccelNoOfReadMissLockedH together show the number
of times a read cache request for this cache volume was missed due to
the primary LUN being written to. If the value cannot be determined or
is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 27 }
cpqDaLogDrvCacheVolAccelNoOfWriteMissLockedH OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Locked (high).
cpqDaLogDrvCacheVolAccelNoOfWriteMissLockedH and
cpqDaLogDrvCacheVolAccelNoOfWriteMissLocked together show the number
of times a write cache request for this cache volume was missed due to
the primary LUN being written to. If the value cannot be determined or
is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 28 }
cpqDaLogDrvCacheVolAccelNoOfWriteMissLocked OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Locked (low).
cpqDaLogDrvCacheVolAccelNoOfWriteMissLocked and
cpqDaLogDrvCacheVolAccelNoOfWriteMissLockedH together show the number
of times a write cache request for this cache volume was missed due to
the primary LUN being written to. If the value cannot be determined or
is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 29 }
cpqDaLogDrvCacheVolAccelNoOfReadMissTotalH OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Total (high).
cpqDaLogDrvCacheVolAccelNoOfReadMissTotalH and
cpqDaLogDrvCacheVolAccelNoOfReadMissTotal together show the total
number of read cache misses for this cache volume. If the value cannot
be determined or is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 30 }
cpqDaLogDrvCacheVolAccelNoOfReadMissTotal OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Total (low).
cpqDaLogDrvCacheVolAccelNoOfReadMissTotal and
cpqDaLogDrvCacheVolAccelNoOfReadMissTotalH together show the total
number of read cache misses for this cache volume. If the value cannot
be determined or is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 31 }
cpqDaLogDrvCacheVolAccelNoOfWriteMissTotalH OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Total (high).
cpqDaLogDrvCacheVolAccelNoOfWriteMissTotalH and
cpqDaLogDrvCacheVolAccelNoOfWriteMissTotal together show the total
number of write cache misses for this cache volume. If the value
cannot be determined or is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 32 }
cpqDaLogDrvCacheVolAccelNoOfWriteMissTotal OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Total (low).
cpqDaLogDrvCacheVolAccelNoOfReadMissTotal and
cpqDaLogDrvCacheVolAccelNoOfReadMissTotalH together show the total
number of write cache misses for this cache volume. If the value
cannot be determined or is not applicable, it is set to -1."
::= { cpqDaLogDrvCacheVolumeAccelEntry 33 }
-- ****************************************************************************
-- Drive Array Spare Drive Table
-- =============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaSpareDrv Group (1.3.6.1.4.1.232.3.2.4)
-- cpqDaSpareTable (1.3.6.1.4.1.232.3.2.4.1)
--
-- The cpqDaSpareDrv group contains configuration and statistical
-- information about the spare drives associated with drive array
-- controllers.
--
-- Implementation of the cpqDaSpareDrv group is mandatory for all
-- agents that support the Drive Array MIB that have a spare
-- configured.
--
-- ****************************************************************************
cpqDaSpareTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaSpareEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Spare Table.
A table of spare entries."
::= { cpqDaSpareDrv 1 }
cpqDaSpareEntry OBJECT-TYPE
SYNTAX CpqDaSpareEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Spare Entry.
An entry in the spare table."
INDEX { cpqDaSpareCntlrIndex, cpqDaSparePhyDrvIndex }
::= { cpqDaSpareTable 1 }
CpqDaSpareEntry ::= SEQUENCE
{
cpqDaSpareCntlrIndex INTEGER,
cpqDaSparePhyDrvIndex INTEGER,
cpqDaSpareStatus INTEGER,
cpqDaSpareReplacedDrv INTEGER,
cpqDaSpareRebuildBlks Counter,
cpqDaSpareCondition INTEGER,
cpqDaSpareBusNumber INTEGER,
cpqDaSpareBay INTEGER,
cpqDaSpareReplacedDrvBusNumber INTEGER,
cpqDaSpareReplacedDrvBay INTEGER,
cpqDaSparePercentRebuild Gauge,
cpqDaSpareLocationString DisplayString
}
cpqDaSpareCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Spare Controller Index.
This index maps the spare drive back to the controller to which
it is attached. The value of this index is the same as the one
used under the controller group."
::= { cpqDaSpareEntry 1 }
cpqDaSparePhyDrvIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Spare Physical Drive Index.
This index maps the spare to the physical drive it represents.
The value of this index is the same as the one used with the
physical drive table."
::= { cpqDaSpareEntry 2 }
cpqDaSpareStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
invalid(2),
failed(3),
inactive(4),
building(5),
active(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Spare Status.
This shows the status of the on-line spare drive.
The following values are valid for the spare status:
Failed (3)
The on-line spare has failed and is no longer available for use.
Inactive (4)
The monitored system has an on-line spare configured, but is
not currently in use.
Building (5)
A physical drive has failed. Automatic Data Recovery
is in progress to recover data to the on-line spare.
Active (6)
A physical drive has failed. Automatic Data Recovery is
complete. The system is using the on-line spare as a
replacement for the failed drive."
::= { cpqDaSpareEntry 3 }
cpqDaSpareReplacedDrv OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Spare Replaced Drive.
If the spare status is active(6) or building(5), then this
has the physical drive number of the replaced drive. Otherwise
a value of -1 will be returned."
::= { cpqDaSpareEntry 4 }
cpqDaSpareRebuildBlks OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Drive Array Spare Number Of Rebuild Blocks Left.
If the spare status is building(5), then this is the number of
blocks left to rebuild before completion.
The data contained on the failed physical drive must be
reconstructed from the fault tolerance data and copied to the
spare so that the spare can function in place of the failed drive.
When the number reaches zero (0), the building process is
complete and the spare has replaced the physical drive."
::= { cpqDaSpareEntry 5 }
cpqDaSpareCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Spare Drive condition.
This value represents the overall condition of this spare drive
and any associated physical drives."
::= { cpqDaSpareEntry 6 }
cpqDaSpareBusNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Spare Drive SCSI Bus Number.
The bus number indicates to which SCSI bus this spare drive
is attached. The first instance is one and increments for
each SCSI bus on a controller. A value of -1 will be
returned if the spare drive is attached to a controller
that does not support multiple SCSI busses. This is not
supported by the IDA, IDA Expansion, or IDA-2 controllers."
::= { cpqDaSpareEntry 7 }
cpqDaSpareBay OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Spare Drive Bay Location.
This value matches the bay location where the physical drive has
been installed. For a SCSI drive, this is the SCSI ID of the
drive."
::= { cpqDaSpareEntry 8 }
cpqDaSpareReplacedDrvBusNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Spare Replaced Drive Bus Number.
If the spare status is active(6) or building(5), then this
has the physical drive bus number of the replaced drive.
If the value cannot be determined or is not applicable, the
value is set to -1."
::= { cpqDaSpareEntry 9 }
cpqDaSpareReplacedDrvBay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Spare Replaced Drive Bay.
If the spare status is active(6) or building(5), then this
has the physical drive bay number of the replaced drive.
If the value cannot be determined or is not applicable, the
value is set to -1."
::= { cpqDaSpareEntry 10 }
cpqDaSparePercentRebuild OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Spare Percent Rebuild.
If the spare status is building(5), then this is percent
complete of of the rebuild.
The data contained on the failed physical drive must be
reconstructed from the fault tolerance data and copied to the
spare so that the spare can function in place of the failed drive.
When the number reaches one hundred (100), the building process
is complete and the spare has replaced the physical drive.
If the value cannot be determined or a rebuild is not active,
the value is set to 4,294,967,295."
::= { cpqDaSpareEntry 11 }
cpqDaSpareLocationString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Spare Drive Location String.
This string describes the location of the drive in relation to
the controller. If the location string cannot be determined,
the agent will return a NULL string."
::= { cpqDaSpareEntry 12 }
-- ****************************************************************************
-- Drive Array Physical Drive Group
-- ================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaPhyDrv Group (1.3.6.1.4.1.232.3.2.5)
-- cpqDaPhyDrvTable (1.3.6.1.4.1.232.3.2.5.1)
--
-- The cpqDaPhyDrv group contains configuration and statistical
-- information about the physical drives associated with drive array
-- controllers.
--
-- Implementation of the cpqDaPhyDrv group is mandatory for all agents
-- that support the Drive Array MIB.
--
-- ****************************************************************************
cpqDaPhyDrvTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaPhyDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Table.
A table of physical drive entries."
::= { cpqDaPhyDrv 1 }
cpqDaPhyDrvEntry OBJECT-TYPE
SYNTAX CpqDaPhyDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Entry.
A physical drive entry."
INDEX { cpqDaPhyDrvCntlrIndex, cpqDaPhyDrvIndex }
::= { cpqDaPhyDrvTable 1 }
CpqDaPhyDrvEntry ::= SEQUENCE
{
cpqDaPhyDrvCntlrIndex INTEGER,
cpqDaPhyDrvIndex INTEGER,
cpqDaPhyDrvModel DisplayString,
cpqDaPhyDrvFWRev DisplayString,
cpqDaPhyDrvBay INTEGER,
cpqDaPhyDrvStatus INTEGER,
cpqDaPhyDrvFactReallocs INTEGER,
cpqDaPhyDrvUsedReallocs Counter,
cpqDaPhyDrvRefHours Counter,
cpqDaPhyDrvHReads Counter,
cpqDaPhyDrvReads Counter,
cpqDaPhyDrvHWrites Counter,
cpqDaPhyDrvWrites Counter,
cpqDaPhyDrvHSeeks Counter,
cpqDaPhyDrvSeeks Counter,
cpqDaPhyDrvHardReadErrs Counter,
cpqDaPhyDrvRecvReadErrs Counter,
cpqDaPhyDrvHardWriteErrs Counter,
cpqDaPhyDrvRecvWriteErrs Counter,
cpqDaPhyDrvHSeekErrs Counter,
cpqDaPhyDrvSeekErrs Counter,
cpqDaPhyDrvSpinupTime INTEGER,
cpqDaPhyDrvFunctTest1 Gauge,
cpqDaPhyDrvFunctTest2 Gauge,
cpqDaPhyDrvFunctTest3 Gauge,
cpqDaPhyDrvDrqTimeouts Counter,
cpqDaPhyDrvOtherTimeouts Counter,
cpqDaPhyDrvSpinupRetries Counter,
cpqDaPhyDrvBadRecvReads Counter,
cpqDaPhyDrvBadRecvWrites Counter,
cpqDaPhyDrvFormatErrs Counter,
cpqDaPhyDrvPostErrs Counter,
cpqDaPhyDrvNotReadyErrs Counter,
cpqDaPhyDrvReallocAborts Counter,
cpqDaPhyDrvThreshPassed INTEGER,
cpqDaPhyDrvHasMonInfo INTEGER,
cpqDaPhyDrvCondition INTEGER,
cpqDaPhyDrvHotPlugs Counter,
cpqDaPhyDrvMediaErrs Counter,
cpqDaPhyDrvHardwareErrs Counter,
cpqDaPhyDrvAbortedCmds Counter,
cpqDaPhyDrvSpinUpErrs Counter,
cpqDaPhyDrvBadTargetErrs Counter,
cpqDaPhyDrvLocation INTEGER,
cpqDaPhyDrvSize INTEGER,
cpqDaPhyDrvBusFaults Counter,
cpqDaPhyDrvIrqDeglitches Counter,
cpqDaPhyDrvHotPlug INTEGER,
cpqDaPhyDrvPlacement INTEGER,
cpqDaPhyDrvBusNumber INTEGER,
cpqDaPhyDrvSerialNum DisplayString,
cpqDaPhyDrvPreFailMonitoring INTEGER,
cpqDaPhyDrvCurrentWidth INTEGER,
cpqDaPhyDrvCurrentSpeed INTEGER,
cpqDaPhyDrvFailureCode INTEGER,
cpqDaPhyDrvBlinkTime Counter,
cpqDaPhyDrvSmartStatus INTEGER,
cpqDaPhyDrvConfigurationStatus INTEGER,
cpqDaPhyDrvRotationalSpeed INTEGER,
cpqDaPhyDrvType INTEGER,
cpqDaPhyDrvSataVersion INTEGER,
cpqDaPhyDrvHostConnector DisplayString,
cpqDaPhyDrvBoxOnConnector INTEGER,
cpqDaPhyDrvLocationString DisplayString,
cpqDaPhyDrvNegotiatedLinkRate INTEGER,
cpqDaPhyDrvNcqSupport INTEGER,
cpqDaPhyDrvPhyCount INTEGER,
cpqDaPhyDrvMultipathAccess INTEGER,
cpqDaPhyDrvMediaType INTEGER,
cpqDaPhyDrvCurrentTemperature INTEGER,
cpqDaPhyDrvTemperatureThreshold INTEGER,
cpqDaPhyDrvMaximumTemperature INTEGER,
cpqDaPhyDrvSSDWearStatus INTEGER,
cpqDaPhyDrvPowerOnHours Counter,
cpqDaPhyDrvSSDPercntEndrnceUsed Gauge,
cpqDaPhyDrvSSDEstTimeRemainingHours Counter,
cpqDaPhyDrvAuthenticationStatus INTEGER,
cpqDaPhyDrvSmartCarrierAppFWRev INTEGER,
cpqDaPhyDrvSmartCarrierBootldrFWRev INTEGER,
cpqDaPhyDrvEncryptionStatus INTEGER
}
cpqDaPhyDrvCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Controller Index.
This index maps the physical drive back to the controller to
which it is attached. The value of this index is the same as
the one used under the controller group."
::= { cpqDaPhyDrvEntry 1 }
cpqDaPhyDrvIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Index.
This index is used for selecting the physical drive table entry.
This number, along with the cpqDaPhyDrvCntlrIndex uniquely
identify a specific physical drive."
::= { cpqDaPhyDrvEntry 2 }
cpqDaPhyDrvModel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Model.
This is a text description of the physical drive. The text that
appears depends upon who manufactured the drive and the drive
type.
If a drive fails, note the model to identify the type of drive
necessary for replacement.
If a model number is not present, you may not have properly
initialized the drive array to which the physical drive is
attached for monitoring."
::= { cpqDaPhyDrvEntry 3 }
cpqDaPhyDrvFWRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Firmware Revision.
This shows the physical drive revision number.
If the firmware revision is not present, you have not properly
initialized the drive array."
::= { cpqDaPhyDrvEntry 4 }
cpqDaPhyDrvBay OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Bay Location.
This value matches the bay location where the physical drive has
been installed. For a SCSI drive, this is the SCSI ID of the
drive. For a SAS or SATA drive, this is the bay number on the
enclosure."
::= { cpqDaPhyDrvEntry 5 }
cpqDaPhyDrvStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
failed(3),
predictiveFailure(4),
erasing(5),
eraseDone(6),
eraseQueued(7),
ssdWearOut(8),
notAuthenticated(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Status.
This shows the status of the physical drive.
The following values are valid for the physical drive status:
Other (1)
Indicates that the instrument agent does not recognize
the drive. You may need to upgrade your instrument agent
and/or driver software.
Ok (2)
Indicates the drive is functioning properly.
Failed (3)
Indicates that the drive is no longer operating and
should be replaced.
Predictive Failure(4)
Indicates that the drive has a predictive failure error and
should be replaced.
Erasing(5)
Indicates that the drive is being erased.
Erase Done(6)
Indicates that the drive has been erased and is now in an
offline state.
Erase Queued(7)
Indicates that an erase operation is currently queued for
the drive.
SSD Wear Out(8)
Indicates that a solid state drive is approaching the maximum
usage limit for writes (wear out) and should be replaced as soon
as possible.
Not Authenticated(9)
Indicates the physical drive could not be authenticated as a genuine
HP hard drive. The array controller will no longer control the drive
LEDs. Please replace the hard drive with a genuine HP hard drive."
::= { cpqDaPhyDrvEntry 6 }
cpqDaPhyDrvFactReallocs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This shows the number of spare sectors available for
remapping at the time the physical drive was shipped.
The physical drive will use these spare sectors for remapping
bad sectors that exist on the drive. Not all drives support
factory reallocation."
::= { cpqDaPhyDrvEntry 7 }
cpqDaPhyDrvUsedReallocs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Used Reallocated Sectors.
This shows the number of sectors of the reallocation area that
have been used by the physical drive.
To see how many sectors were originally available for use in the
reallocation area, refer to the factory reallocation information
if it exists. Not all drives support factory reallocation.
Because of the nature of magnetic disks, certain sectors on a
drive may have media defects. The reallocation area is part of
the disk drive that the drive manufacturer sets aside to
compensate for these defects. The drive array controller writes
information addressed from these unusable sectors to available
sectors in the reallocation area. If too many sectors have
been reallocated, there may be a problem with the drive.
If you suspect a problem, schedule server down time to run
diagnostics to verify that a problem exists."
::= { cpqDaPhyDrvEntry 8 }
cpqDaPhyDrvRefHours OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reference Time in hours.
This shows the total number of hours that a physical drive has
been in operation since the drive was stamped. The drive will have
either been stamped when it left the factory or when you ran
diagnostics on your new drive. You can use the reference
time to calculate rates for other physical drive events."
::= { cpqDaPhyDrvEntry 9 }
cpqDaPhyDrvHReads OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sectors Read (high).
The phyDrvHReads and the phyDrvReads together shows the total
number of sectors read from the physical disk drive during the
reference time (phyDrvRefHours).
The actual number of sectors read equals the phyDrvHReads
times 2^32 plus the phyDrvReads.
This information may be useful for determining rates.
For instance, if you wanted to calculate the average number
of reads per hour of operation, divide this number by the
reference hours."
::= { cpqDaPhyDrvEntry 10 }
cpqDaPhyDrvReads OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sectors Read (low).
The phyDrvHReads and the phyDrvReads together shows
the total number of sectors read from the physical disk drive
during the reference time (phyDrvRefHours).
The actual number of sectors read equals the phyDrvHReads
times 2^32 plus the phyDrvReads.
This information may be useful for determining rates.
For instance, if you wanted to calculate the average number
of reads per hour of operation, divide this number by the
reference hours."
::= { cpqDaPhyDrvEntry 11 }
cpqDaPhyDrvHWrites OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sectors Written (high).
The phyDrvHWrites and the phyDrvWrites together shows the
total number of sectors written to the physical disk drive
during the reference hours (phyDrvRefHours).
The actual number of sectors written equals the phyDrvHWrites
times 2^32 plus the phyDrvWrites.
This information may be useful for determining rates.
For instance, if you wanted to calculate the average number
of writes per hour of operation, divide this number by the
reference hours. "
::= { cpqDaPhyDrvEntry 12 }
cpqDaPhyDrvWrites OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sectors Written (low).
The phyDrvHWrites and the phyDrvWrites together
shows the total number of sectors written to the physical
disk drive during the reference hours (phyDrvRefHours).
The actual number of sectors written equals the phyDrvHWrites
times 2^32 plus the phyDrvWrites.
This information may be useful for determining rates.
For instance, if you wanted to calculate the average number of
writes per hour of operation, divide this number by the reference
hours. "
::= { cpqDaPhyDrvEntry 13 }
cpqDaPhyDrvHSeeks OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total Seeks (high).
The phyDrvHSeeks and the phyDrvSeeks together shows the total
number of seek operations performed by the physical disk drive
during the reference hours (phyDrvRefHours).
The actual number of seeks equals the phyDrvHSeeks times
2^32 plus the phyDrvWriteSeeks."
::= { cpqDaPhyDrvEntry 14 }
cpqDaPhyDrvSeeks OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total Seeks (low).
The phyDrvHSeeks and the phyDrvSeeks together shows the total
number of seek operations performed by the physical disk drive
during the reference hours (phyDrvRefHours).
The actual number of seeks equals the phyDrvHSeeks times
2^32 plus the phyDrvWriteSeeks."
::= { cpqDaPhyDrvEntry 15 }
cpqDaPhyDrvHardReadErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Hard Read Errors.
This shows the number of read errors that have occurred on a
drive that could not be recovered by a physical drive's Error
Correction Code (ECC) algorithm or through retries during the
reference time (phyDrvRefTime). Over time, a disk drive may
produce these errors. If you receive these errors, a problem
may exist with your drive.
The value increases every time the physical drive detects another
error.
The severity of these errors depends on whether the monitored
system is running in a fault tolerant mode. With fault tolerance,
the controller can remap data to eliminate the problems caused by
these errors. In either case, if you see an increase in these
errors, schedule server down time to run diagnostics to verify
that a problem exists."
::= { cpqDaPhyDrvEntry 16 }
cpqDaPhyDrvRecvReadErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Recovered Read Errors.
This shows the number of read errors corrected through physical
drive retries during the reference time (phyDrvRefTime).
Over time, all disk drives produce these errors. If you notice a
rapid increase in the value for Recovered Read Errors (or Hard
Read Errors), a problem may exist with the drive. The value
increases every time the physical drive detects and corrects
another error.
Expect more Recovered Read Errors than Hard Read Errors. If you
suspect that a problem may exist with the drive, schedule server
down time to run diagnostics."
::= { cpqDaPhyDrvEntry 17 }
cpqDaPhyDrvHardWriteErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Hard Write Errors.
This shows the number of write errors that could not be recovered
by a physical drive during the reference time (phyDrvRefTime).
Over time a disk drive may detect these errors. If you notice an
increase in the value shown for Hard Write Errors or Recovered
Write Errors, a problem may exist with the drive. The value
increases every time the physical drive detects another error.
On average, these errors should occur less frequently than
read errors. If you see an increase in these errors, schedule
server down time to run diagnostics to verify that a problem
exists."
::= { cpqDaPhyDrvEntry 18 }
cpqDaPhyDrvRecvWriteErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Recovered Write Errors.
This shows the number of write errors corrected through physical
drive retries or recovered by a physical drive during the
reference time (phyDrvRefTime).
Over time a disk drive may produce these errors.
If you notice an increase in the value shown for Hard Write
Errors or Recovered Write Errors, a problem may exist with
the drive.
The value increases every time the physical drive detects and
corrects an error. Only an unusually rapid increase in these
errors indicates a problem.
On average, these errors should occur less frequently than hard
read errors. If you suspect that a problem may exist with the
drive, schedule server down time to run diagnostics."
::= { cpqDaPhyDrvEntry 19 }
cpqDaPhyDrvHSeekErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Seek Errors (High).
The phyDrvHSeekErrs and the phyDrvSeekErrs together shows the
total number of times that the physical disk drive detected a
seek error during the reference hours (phyDrvRefHours).
The actual number of seek errors equals the phyDrvHSeekErrs times
2^32 plus the phyDrvWriteSeekErrs.
Over time, a disk drive usually produces these errors. If you
notice a rapid increase in the value shown for Seek Errors,
this physical drive may be failing.
The value increases every time the physical drive produces
another error. Only an unusually rapid increase in these errors
indicates a problem. If you suspect that a problem exists,
schedule server down time to run diagnostics."
::= { cpqDaPhyDrvEntry 20 }
cpqDaPhyDrvSeekErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Seek Errors (low).
The phyDrvHSeekErrs and the phyDrvSeekErrs together shows the
total number of times that the physical disk drive detected a
seek error during the reference hours (phyDrvRefHours).
The actual number of seek errors equals the phyDrvHSeekErrs times
2^32 plus the phyDrvWriteSeekErrs.
Over time, a disk drive usually produces these errors. If you
notice a rapid increase in the value shown for Seek Errors,
this physical drive may be failing.
The value increases every time the physical drive produces another
error. Only an unusually rapid increase in these errors indicates
a problem. If you suspect that a problem exists, schedule server
down time to run diagnostics."
::= { cpqDaPhyDrvEntry 21 }
cpqDaPhyDrvSpinupTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Spin up Time in tenths of seconds.
This is the time it takes for a physical drive to spin up to full
speed.
Disks require time to gain momentum and reach operating speed. As
cars are tested to go from 0 mph to 60 mph in x number of seconds,
drive manufacturers have preset expectations for the time it takes
the drive to spin to full speed. Drives that do not meet these
expectations may have problems.
The value may be zero (0) under one of the following conditions:
* If you are monitoring a physical drive that is part of the
monitored system's internal drive array storage, and you use a
warm boot to reset the monitored system. During a warm boot,
the drives continue to spin.
* If you are monitoring a physical drive in an ProLiant Storage
System and you reset the monitored system but not the
ProLiant Storage System."
::= { cpqDaPhyDrvEntry 22 }
cpqDaPhyDrvFunctTest1 OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Functional Test 1.
This provides information about a series of tests that indicate
how well a physical drive works. These tests compare the way the
physical drive currently operates when performing various tasks
with the way it worked when it was new.
A percent value is displayed that represents how the drive works
currently when compared to how the drive worked when new. New
drives operate at the 100 percent level. By default, if the
current value is less than or equal to 80 percent, a problem may
exist.
If you suspect a problem, schedule server down time to run
diagnostics to verify that a problem exists.
If the value cannot be determined, it is set to 4,294,967,295."
::= { cpqDaPhyDrvEntry 23 }
cpqDaPhyDrvFunctTest2 OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Functional Test 2.
This provides information about a series of tests that indicate
how well a physical drive works. These tests compare the way the
physical drive currently operates when performing various tasks
with the way it worked when it was new.
A percent value is displayed that represents how the drive works
currently when compared to how the drive worked when new. New
drives operate at the 100 percent level. By default, if the
current value is less than or equal to 80 percent, a problem may
exist.
If you suspect a problem, schedule server down time to run
diagnostics to verify that a problem exists.
If the value cannot be determined, it is set to 4,294,967,295."
::= { cpqDaPhyDrvEntry 24 }
cpqDaPhyDrvFunctTest3 OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Functional Test 3.
This provides information about a series of tests that indicate
how well a physical drive works. These tests compare the way the
physical drive currently operates when performing various tasks
with the way it worked when it was new.
A percent value is displayed that represents how the drive works
currently when compared to how the drive worked when new. New
drives operate at the 100 percent level. By default, if the
current value is less than or equal to 80 percent, a problem may
exist.
If you suspect a problem, schedule server down time to run
diagnostics to verify that a problem exists.
If the value cannot be determined, it is set to 4,294,967,295."
::= { cpqDaPhyDrvEntry 25 }
cpqDaPhyDrvDrqTimeouts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"DRQ Timeouts.
The number of times that a physical drive continued to request
data, but did not get a command completion during the reference
time (phyDrvRefTime). This value increases every time a DRQ
timeout occurs for the physical drive.
A defective drive or cable may cause DRQ timeouts to occur.
If you see an increase in these errors, complete the following
steps for the monitored system:
1. Check the cables connecting the drive to ensure that
they are intact.
2. If the cables are properly connected, schedule server down
time to run diagnostics to verify that a problem exists.
If the value is not supported, it is set to 4,294,967,295."
::= { cpqDaPhyDrvEntry 26 }
cpqDaPhyDrvOtherTimeouts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Other Timeouts.
The number of times that a physical drive did not respond with an
interrupt within a controller-defined period of time after a
command had been issued during the reference time (phyDrvRefTime).
This does not include DRQ timeouts.
If you suspect a problem, complete the following steps for the
monitored system:
1. Check the cables connecting the drive to ensure that they
are intact.
2. If the cables are properly connected, schedule server down
time to run diagnostics to verify that a problem
exists."
::= { cpqDaPhyDrvEntry 27 }
cpqDaPhyDrvSpinupRetries OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Spin up Retries.
The number of times that a physical drive had to retry to spin up
before successfully achieving operating speed during the reference
time (phyDrvRefTime). This value represents the spin-up retries
that occurred since the last time you turned on the monitored
system.
If you suspect a problem, schedule server down time to run
diagnostics verify that a problem exists."
::= { cpqDaPhyDrvEntry 28 }
cpqDaPhyDrvBadRecvReads OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Recovery Failed (Bad) Read Error.
The number of times a read error occurred while performing
Automatic Data Recovery from this physical drive to another
drive during the reference time (phyDrvRefTime).
If a read error occurs, Automatic Data Recovery stops.
These errors indicate that the physical drive has failed.
If you suspect a problem, schedule server down time to run
diagnostics to verify that a problem exists."
::= { cpqDaPhyDrvEntry 29 }
cpqDaPhyDrvBadRecvWrites OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Recovery Failed (Bad) Write Error.
The number of times a write error occurred while performing
Automatic Data Recovery from another drive to this physical
drive during the reference time (phyDrvRefTime).
If a write error occurs, Automatic Data Recovery stops.
These errors indicate that the physical drive has failed.
If you suspect a problem, schedule server down time to run
diagnostics to verify that a problem exists."
::= { cpqDaPhyDrvEntry 30 }
cpqDaPhyDrvFormatErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Format Error.
The number of times a format operation failed when the controller
attempted to remap a bad sector during the reference time
(phyDrvRefTime). Zero indicates that no format errors have
occurred. The value increases each time a format error occurs.
A failed format operation may cause the controller to mark a
drive failed.
If you suspect a problem, schedule server down time to run
diagnostics verify a problem exists."
::= { cpqDaPhyDrvEntry 31 }
cpqDaPhyDrvPostErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power On Self Test (Post) Error.
The number of times that a physical drive failed its self test
during the reference time (phyDrvRefTime).
The physical drive does a self test each time power is applied
to the system.
If the value is not supported, it is set to 4,294,967,295."
::= { cpqDaPhyDrvEntry 32 }
cpqDaPhyDrvNotReadyErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Not Ready Errors.
The number of times the physical drive failed after the spin up
command was issued during the reference time (phyDrvRefTime).
When the spin up command was issued, the drive failed to reach
its ready state. If the current value is zero, the drive has
not failed. If the current value is greater than zero, at
least one failure occurred.
This error could be caused because the physical drive has failed
to spin.
If you suspect a problem:
1. Check the cables connecting the drive to ensure that they
are intact.
2. If the cables are properly connected, schedule server down
time to run diagnostics to verify that a problem exists."
::= { cpqDaPhyDrvEntry 33 }
cpqDaPhyDrvReallocAborts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Reallocation Aborts.
The number of times the physical drive has failed due to an error
that occurred when the controller was trying to reallocate a bad
sector during the reference time (phyDrvRefTime). Zero (0)
indicates that no Reallocation Abort errors have occurred.
The value increases each time a Reallocation Abort error occurs.
Because of the nature of magnetic disks, certain sectors on a
drive may have media defects. The reallocation area is part of
the disk drive that is set aside to compensate for these defects.
The array controller writes information addressed from unusable
sectors to available sectors in the reallocation area.
If you suspect a problem, schedule server down time to run
diagnostics verify a problem exists."
::= { cpqDaPhyDrvEntry 34 }
cpqDaPhyDrvThreshPassed OBJECT-TYPE
SYNTAX INTEGER
{
false(1),
true(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Factory Threshold Passed (Exceeded).
When the drive is shipped, certain thresholds have been set to
monitor performance of the drives. For example, a threshold
might be set for Spin up Time. If the time that it takes the
drive to spin up exceeds the factory threshold, there may be
a problem with one of the drives.
If you suspect a problem, schedule server down time to run
diagnostics.
Note: These thresholds may be under warranty under certain
conditions."
::= { cpqDaPhyDrvEntry 35 }
cpqDaPhyDrvHasMonInfo OBJECT-TYPE
SYNTAX INTEGER
{
false(1),
true(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Has Monitor Information.
All of the physical disk table fields except for the physical
disk status (phyDrvStatus) and the bay location
(phyDrvBayLocation) are invalid unless this field has a value
of true(2)."
::= { cpqDaPhyDrvEntry 36 }
cpqDaPhyDrvCondition OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The condition of the device.
This value represents the overall condition of this physical
drive."
::= { cpqDaPhyDrvEntry 37 }
cpqDaPhyDrvHotPlugs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Hot Plug Count.
This value indicates the number of times this physical drive
was hot-plugged (removed) from a ProLiant Storage System.
This is not supported by the IDA, IDA Expansion, or IDA-2
controllers."
::= { cpqDaPhyDrvEntry 38 }
cpqDaPhyDrvMediaErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Media Failure Count.
This value indicates the number of times this physical drive
was failed due to unrecoverable media errors. This is not
supported by the IDA, IDA Expansion, or IDA-2 controllers."
::= { cpqDaPhyDrvEntry 39 }
cpqDaPhyDrvHardwareErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Hardware Error Count.
This value indicates the number of times this physical drive
returned a bad hardware status. The drive may be failed if
retries do not work. This is not supported by the IDA,
IDA Expansion, or IDA-2 controllers."
::= { cpqDaPhyDrvEntry 40 }
cpqDaPhyDrvAbortedCmds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Aborted Command Failures.
This value indicates the number of times this physical drive
was failed due to aborted commands that could not be retried
successfully. This is not supported by the IDA, IDA Expansion,
or IDA-2 controllers."
::= { cpqDaPhyDrvEntry 41 }
cpqDaPhyDrvSpinUpErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Spin-Up Failure Count.
This value indicates the number of times this physical drive
was failed due to a failure of a spin-up command. This is not
supported by the IDA, IDA Expansion, or IDA-2 controllers."
::= { cpqDaPhyDrvEntry 42 }
cpqDaPhyDrvBadTargetErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Bad Target Count.
This value indicates the number of times this physical drive
performed some action that did not conform to the SCSI-2 bus
protocol. These actions will cause the SCSI bus to be reset.
This is not supported by the IDA, IDA Expansion, or IDA-2
controllers."
::= { cpqDaPhyDrvEntry 43 }
cpqDaPhyDrvLocation OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
internal(2),
external(3),
proLiant(4)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Drive Physical Location.
This is the physical location of where the drive is located.
The following values are defined:
other(1)
The location of the drive is not known.
internal(2)
The drive is located inside of the computer system box.
external(3)
The drive is located outside of the computer system box.
proLiant(4)
The drive is located outside of the computer system box
in a ProLiant Storage System."
::= { cpqDaPhyDrvEntry 44 }
cpqDaPhyDrvSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Size in MB.
This is the size of the physical drive in megabytes. This value
is calculated using the value 1,048,576 (2^20) as a megabyte.
Drive manufacturers sometimes use the number 1,000,000 as a
megabyte when giving drive capacities so this value may differ
from the advertised size of a drive. This field is only
applicable for controllers which support SCSI drives, and
therefore is not supported by the IDA or IDA-2 controllers.
The field will contain 0xFFFFFFFF if the drive capacity cannot
be calculated or if the controller does not support SCSI drives."
::= { cpqDaPhyDrvEntry 45 }
cpqDaPhyDrvBusFaults OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Bus Fault Count.
This value indicates the number of times that a bus fault was
detected for the drive by the controller. This is not supported
by the IDA, IDA Expansion, or IDA-2 controllers."
::= { cpqDaPhyDrvEntry 46 }
cpqDaPhyDrvIrqDeglitches OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive IRQ Deglitch Count.
This is not supported by the IDA, IDA Expansion, or IDA-2
controllers."
::= { cpqDaPhyDrvEntry 47 }
cpqDaPhyDrvHotPlug OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
hotPlug(2),
nonHotPlug(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Hot Plug Support Status.
The following values are defined:
other(1)
The Insight Agent is unable to determine if this drive
supports hot plug replacement.
hotPlug(2)
The drive supports hot plug replacement.
nonhotPlug(3)
The drive does not support hot plug replacement."
::= { cpqDaPhyDrvEntry 48 }
cpqDaPhyDrvPlacement OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
internal(2),
external(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Placement.
The following values are defined:
other(1)
The agent is unable to determine if the drive is internal or
external to the system chassis.
internal(2)
The drive is located in the system chassis.
external(3)
The drive is located outside the system chassis in an
expansion box."
::= { cpqDaPhyDrvEntry 49 }
cpqDaPhyDrvBusNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive SCSI Bus Number.
The bus number indicates to which SCSI bus this physical
drive is attached. The first instance is one and increments
for each SCSI bus on a controller. A value of -1 will be
returned if the physical drive is attached to a controller
that does not support multiple SCSI busses. This is not
supported by the IDA, IDA Expansion, or IDA-2 controllers.
For SAS and SATA drives, the bus number corresponds to the
enclosure where the drive resides."
::= { cpqDaPhyDrvEntry 50 }
cpqDaPhyDrvSerialNum OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Serial Number.
This is the serial number assigned to the physical drive.
This value is based upon the serial number as returned by the
SCSI inquiry command but may have been modified due to space
limitations. This can be used for identification purposes."
::= { cpqDaPhyDrvEntry 51 }
cpqDaPhyDrvPreFailMonitoring OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notAvailable(2),
available(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Predictive Failure Monitoring.
The following values are defined:
other(1)
The agent is unable to determine if the drive supports
predictive failure monitoring.
notAvailable(2)
This drive does not support predictive failure monitoring.
available(3)
This drive supports predictive failure monitoring."
::= { cpqDaPhyDrvEntry 52 }
cpqDaPhyDrvCurrentWidth OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
narrow(2),
wide16(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Current Width.
The following values are defined:
other(1)
The agent is unable to determine the current negotiated data
transfer width for this drive.
narrow(2)
The negotiated data transfer width for this drive is narrow
(8 data bits).
wide16(3)
The negotiated data transfer width for this drive is wide
(16 data bits)."
::= { cpqDaPhyDrvEntry 53 }
cpqDaPhyDrvCurrentSpeed OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
asynchronous(2),
fast(3),
ultra(4),
ultra2(5),
ultra3(6),
ultra320(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Current Data Transfer Speed.
The following values are defined:
other(1)
The agent is unable to determine the current negotiated data
transfer speed for this drive.
asynchronous(2)
The negotiated data transfer speed for this drive is
asynchronous.
fast(3)
The negotiated data transfer speed for this drive is 10 million
transfers per second).
ultra(4)
The negotiated data transfer speed for this drive is 20 million
transfers per second.
ultra2(5)
The negotiated data transfer speed for this drive is 40 million
transfers per second.
ultra3(6)
The negotiated data transfer speed for this drive is 80 million
transfers per second.
ultra320(7)
The negotiated data transfer speed for this drive is 160
million transfers per second."
::= { cpqDaPhyDrvEntry 54 }
cpqDaPhyDrvFailureCode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Failure Code.
This value is the drive failure reason code returned by the
array firmware. It is valid only when the drive is failed.
If the drive is not failed, 0 is returned."
::= { cpqDaPhyDrvEntry 55 }
cpqDaPhyDrvBlinkTime OBJECT-TYPE
SYNTAX Counter
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Physical Drive Blink Time Count.
This value indicates the amount of time, in tenths of a second,
that the physical drive LEDs will continue to blink. A value of
zero indicates the drive LEDs are not blinking. If the value
cannot be determined or the drive is not in a hot plug tray,
4,294,967,295 is returned.
To blink the drive LEDs, set this value to the time to blink in
tenths of seconds.
To stop the drive LEDs from blinking, set this value to 0."
::= { cpqDaPhyDrvEntry 56 }
cpqDaPhyDrvSmartStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
replaceDrive(3),
replaceDriveSSDWearOut(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive S.M.A.R.T Status.
The following values are defined:
other(1)
The agent is unable to determine if the status of S.M.A.R.T
predictive failure monitoring for this drive.
ok(2)
Indicates the drive is functioning properly.
replaceDrive(3)
Indicates that the drive has a S.M.A.R.T predictive failure
error and should be replaced.
replaceDriveSSDWearOut(4)
Indicates that the solid state drive has a S.M.A.R.T wear
error and is approaching the maximum usage limit for writes
(wear out). The solid state drive should be replaced as soon as
possible."
::= { cpqDaPhyDrvEntry 57 }
cpqDaPhyDrvConfigurationStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
configured(2),
notConfigured(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Configuration Status.
The following values are defined:
other(1)
The agent is unable to determine the configuration status of
this physical drive.
configured(2)
Indicates the drive is configured to be part of a logical
drive as either a member drive or a spare drive.
notConfigured(3)
Indicates the drive is not configured to be part of a logical
drive as either a member drive or a spare drive."
::= { cpqDaPhyDrvEntry 58 }
cpqDaPhyDrvRotationalSpeed OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
rpm7200(2),
rpm10K(3),
rpm15K(4),
rpmSsd(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Rotational Speed.
The following values are defined:
other(1)
The agent is unable to determine the rotational speed for
this drive.
rpm7200(2)
The rotational speed for this drive is 7200 rpm.
rpm10K(3)
The rotational speed for this drive is 10000 rpm.
rpm15K(4)
The rotational speed for this drive is 15000 rpm.
rpmSsd(5)
The drive is made of solid state electronics and does not
have a rotational speed."
::= { cpqDaPhyDrvEntry 59 }
cpqDaPhyDrvType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
parallelScsi(2),
sata(3),
sas(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Type.
The following values are defined:
other(1)
The agent is unable to determine the type for this drive.
parallelScsi(2)
The drive type is parallel SCSI.
sata(3)
The drive type is Serial ATA.
sas(4)
The drive type is Serial Attached SCSI."
::= { cpqDaPhyDrvEntry 60 }
cpqDaPhyDrvSataVersion OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
sataOne(2),
sataTwo(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive SATA Version.
The following values are defined:
other(1)
The agent is unable to determine the SATA version for this
drive or it is not a SATA drive.
sataOne(2)
The drive is SATA version one.
sataTwo(3)
The drive is SATA version two."
::= { cpqDaPhyDrvEntry 61 }
cpqDaPhyDrvHostConnector OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Host Connector.
This is the host connector to which the drive is ultimately
attached. If the host connector cannot be determined, the agent
will return a NULL string."
::= { cpqDaPhyDrvEntry 62 }
cpqDaPhyDrvBoxOnConnector OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Box on Connector.
The box on connector indicates to which box instance this
physical drive belongs. The instances start at one and increment for
each box attached to a connector. A value of -1 is returned for drives
that do not support cpqDaPhyDrvBoxOnConnector."
::= { cpqDaPhyDrvEntry 63 }
cpqDaPhyDrvLocationString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Location String.
This string describes the location of the drive in relation to
the controller. If the location string cannot be determined,
the agent will return a NULL string."
::= { cpqDaPhyDrvEntry 64 }
cpqDaPhyDrvNegotiatedLinkRate OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
rate-1-5(2),
rate-3-0(3),
rate-6-0(4),
rate-12-0(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Negotiated Link Rate.
The following values are defined:
other(1)
The agent is unable to determine the negotiated link rate
this drive or it is not a SAS or SATA drive.
rate-1-5(2)
The negotiated link rate for this drive is 1.5 Gigabits per
second.
rate-3-0(3)
The negotiated link rate for this drive is 3.0 Gigabits per
second.
rate-6-0(4)
The negotiated link rate for this drive is 6.0 Gigabits per
second.
rate-12-0(5)
The negotiated link rate for this drive is 12.0 Gigabits per
second."
::= { cpqDaPhyDrvEntry 65 }
cpqDaPhyDrvNcqSupport OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
noControllerSupport(2),
noDriveSupport(3),
ncqDisabled(4),
ncqEnabled(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Native Command Queueing.
The following values are defined:
other(1)
The agent is unable to determine the NCQ configuration for
this drive or it is not a SATA drive.
noControllerSupport(2)
The array controller does not support NCQ.
noDriveSupport(3)
The array controller does support NCQ, but the drive does not.
ncqDisabled(4)
The array controller and drive support NCQ, but it is disabled.
ncqEnabled(5)
The array controller and drive support NCQ and it is enabled."
::= { cpqDaPhyDrvEntry 66 }
cpqDaPhyDrvPhyCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive PHY Count.
This value indicates how many PHYs exist on SAS/SATA disk. For
parallel SCSI disks, this value is set to -1."
::= { cpqDaPhyDrvEntry 67 }
cpqDaPhyDrvMultipathAccess OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notSupported(2),
notConfigured(3),
pathRedundant(4),
noRedundantPath(5),
driveFailed(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Multi-path Access Status.
This indicates if this physical drive has been configured to have
and currently still has more than one I/O path to the controller.
The following values are valid:
Other (1)
Indicates that the instrument agent can not determine if this
physical drive has multi-path access.
Not Supported (2)
Indicates that multi-path access to this physical drive is not
supported.
Not Configured (3)
Indicates that the physical drive is not configured to have
multi-path access.
Path Redundant (4)
Indicates that the physical drive currently has more than one
I/O path to the controller.
No Redundant Path (5)
Indicates that the physical drive previously had more than one
I/O path to the controller, but now has no redundant I/O path.
Drive Failed (6)
Indicates that the physical drive has failed."
::= { cpqDaPhyDrvEntry 68 }
cpqDaPhyDrvMediaType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
rotatingPlatters(2),
solidState(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Media Type.
The following values are defined:
other(1)
The instrument agent is unable to determine the physical drive<76>s
media type.
rotatingPlatters(2)
The physical drive media is composed of rotating platters.
solidState(3)
The physical drive media is composed of solid state electronics."
::= { cpqDaPhyDrvEntry 69 }
cpqDaPhyDrvCurrentTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Current Temperature.
This is the temperature of the physical drive in degrees Celsius.
The field will contain -1 if the drive temperature cannot be
calculated or if the controller does not support reporting drive
temperature."
::= { cpqDaPhyDrvEntry 70 }
cpqDaPhyDrvTemperatureThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Temperature Threshold.
This is the temperature in degrees Celsius at which the drive says it is
overheated. The field will contain -1 if the drive temperature
threshold cannot be calculated or if the controller does not support
reporting drive temperature threshold."
::= { cpqDaPhyDrvEntry 71 }
cpqDaPhyDrvMaximumTemperature OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Maximum Temperature.
This is the maximum temperature in degrees Celsius that the drive has
reached. The field will contain -1 if the maximum drive
temperature cannot be calculated or if the controller does not support
reporting maximum drive temperature."
::= { cpqDaPhyDrvEntry 72 }
cpqDaPhyDrvSSDWearStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
fiftySixDayThreshold(3),
fivePercentThreshold(4),
twoPercentThreshold(5),
ssdWearOut(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Solid State Disk Wear Status.
This shows the wear status of the solid state physical drive.
The following values are valid for the physical drive solid state
wear status:
Other (1)
The instrument agent is unable to determine the physical drive<76>s
solid state disk wear status. This value would be used for non
SSD drives or SSD drives that do not support wear reporting.
Ok (2)
Indicates the solid state disk is not in any imminent danger
of wear out.
Fifty Six Day Threshold Passed (3)
Indicates that based upon the current workload, the solid state
disk will reach the maximum usage limit for writes (wear out)
within fifty-six days. You should modify your write workload or
begin preparing to replace your SSD drive.
Five Percent Threshold Passed (4)
Indicates that the solid state disk has passed the five percent
threshold and is at or below five percent of reaching the maximum
usage limit for writes (wear out). You should begin to prepare
to replace your SSD drive.
Two Percent Threshold Passed (5)
Indicates that the solid state disk has passed the two percent
threshold and is at or below two percent of reaching the maximum
usage limit for writes (wear out). You should begin to prepare
to replace your SSD drive.
SSD Wear Out(6)
Indicates that a solid state drive is approaching the maximum
usage limit for writes (wear out) and should be replaced as soon
as possible."
::= { cpqDaPhyDrvEntry 73 }
cpqDaPhyDrvPowerOnHours OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Power On Hours.
This is the total number of hours that the physical disk
has been powered on. This value will be 4,294,967,295 if the disk
power on hours cannot be determined or is not supported."
::= { cpqDaPhyDrvEntry 74 }
cpqDaPhyDrvSSDPercntEndrnceUsed OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Solid State Percent Endurance Used.
This value specifies the hundredths of the percentage of solid state
disk life used. The value of this field is allowed to exceed 100%.
As an example, if the value reported is 50, this would indicate .50
percent endurance used.
This value will be 4,294,967,295 if the percent endurance used cannot
be determined or is not supported."
::= { cpqDaPhyDrvEntry 75 }
cpqDaPhyDrvSSDEstTimeRemainingHours OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Solid State Estimated Time Remaining In
Hours.
This is the estimated total number of hours that the solid state
physical disk has remaining. This value will be 4,294,967,295 if the
solid state disk estimated time remaining in hours cannot be
determined or is not supported."
::= { cpqDaPhyDrvEntry 76 }
cpqDaPhyDrvAuthenticationStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notSupported(2),
authenticationFailed(3),
authenticationPassed(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Authentication Status.
The following values are defined:
Other (1)
Indicates that the instrument agent can not determine the
physical drive's authentication status.
Not Supported (2)
Indicates that authentication for this physical drive is not
supported.
Authentication Failed(3)
The physical drive could not be authenticated as a genuine HP hard drive.
The array controller will no longer control the drive LEDs. Please replace
the hard drive with a genuine HP hard drive.
Authentication Passed(4)
The physical drive has passed all authentication tests and has been validated
to be a genuine HP hard drive."
::= { cpqDaPhyDrvEntry 77 }
cpqDaPhyDrvSmartCarrierAppFWRev OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Smart Carrier Application Firmware Revision.
This displays the physical drive smart carrier application
firmware revision number.
This value will be nonzero if the physical drive supports
authentication and cpqDaPhyDrvAuthenticationStatus has a value of
authenticationPassed(4)."
::= { cpqDaPhyDrvEntry 78 }
cpqDaPhyDrvSmartCarrierBootldrFWRev OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Smart Carrier Bootloader Firmware Revision.
This displays the physical drive smart carrier bootloader
firmware revision number.
This value will be nonzero if the physical drive supports
authentication and cpqDaPhyDrvAuthenticationStatus has a value of
authenticationPassed(4)."
::= { cpqDaPhyDrvEntry 79 }
cpqDaPhyDrvEncryptionStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
encrypted(2),
notEncrypted(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Encryption Status.
The physical drive's encryption status. The following values are
valid:
other (1)
Indicates that the instrument agent does not recognize the
value. You may need to upgrade the instrument agent.
Encrypted (2)
Indicates this drive is online and a member of a logical drive that
is encrypted.
Not Encrypted (3)
Indicates this drive is not a member of a logical drive that
is encrypted."
::= { cpqDaPhyDrvEntry 80 }
-- ****************************************************************************
-- Drive Array Physical Drive Error Table
-- ======================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaPhyDrv Group (1.3.6.1.4.1.232.3.2.5)
-- cpqDaPhyDrvErrTable (1.3.6.1.4.1.232.3.2.5.2)
--
-- ****************************************************************************
cpqDaPhyDrvErrTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaPhyDrvErrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Error Log Table.
A table of physical drive entries. The Error Log Table is not
supported by the IDA, IDA Expansion, or IDA-2 controllers."
::= { cpqDaPhyDrv 2 }
cpqDaPhyDrvErrEntry OBJECT-TYPE
SYNTAX CpqDaPhyDrvErrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Entry."
INDEX { cpqDaPhyDrvErrCntlrIndex, cpqDaPhyDrvErrIDIndex,
cpqDaPhyDrvErrIndex }
::= { cpqDaPhyDrvErrTable 1 }
CpqDaPhyDrvErrEntry ::= SEQUENCE
{
cpqDaPhyDrvErrCntlrIndex INTEGER,
cpqDaPhyDrvErrIDIndex INTEGER,
cpqDaPhyDrvErrIndex INTEGER,
cpqDaPhyDrvErrType INTEGER,
cpqDaPhyDrvScsiOp INTEGER,
cpqDaPhyDrvScsiStatus INTEGER,
cpqDaPhyDrvCamStatus INTEGER,
cpqDaPhyDrvSenseKey INTEGER,
cpqDaPhyDrvQualifier INTEGER,
cpqDaPhyDrvSenseCode INTEGER,
cpqDaPhyDrvBlockValid INTEGER,
cpqDaPhyDrvBlock INTEGER,
cpqDaPhyDrvTime INTEGER,
cpqDaPhyDrvUserDesc DisplayString,
cpqDaPhyDrvErrDesc INTEGER
}
cpqDaPhyDrvErrCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Error Log Controller Index.
This index maps the physical drive back to the controller to
which it is attached. The value of this index is the same as
the one used under the controller group."
::= { cpqDaPhyDrvErrEntry 1 }
cpqDaPhyDrvErrIDIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Error Log Index.
This index is used for selecting the physical drive table entry.
This number, along with the cpqDaPhyDrvErrCntlrIndex uniquely
identify a specific physical drive."
::= { cpqDaPhyDrvErrEntry 2 }
cpqDaPhyDrvErrIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Error Log Index.
This index is used for selecting the physical drive table entry.
This number, along with the cpqDaPhyDrvErrCntlrIndex uniquely
identify a specific physical drive."
::= { cpqDaPhyDrvErrEntry 3 }
cpqDaPhyDrvErrType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
noError(2),
scsiError(3),
camError(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Error Log Error Type.
The type of error in the error log. The valid types are:
Other (1)
Indicates that the instrument agent does not recognize the
type of error in the error log.
No Error (2)
Indicates that this error log entry does not have an error.
SCSI Error (3)
Indicates that this error log entry is a SCSI Error.
CAM Error (4)
Indicates that this error log entry is a CAM error."
::= { cpqDaPhyDrvErrEntry 4 }
cpqDaPhyDrvScsiOp OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Error Log SCSI Operation.
This is the SCSI Command Operation Code byte associated with the
error log entry. For further specifications consult a SCSI-2
logical specification or other SCSI reference."
::= { cpqDaPhyDrvErrEntry 5 }
cpqDaPhyDrvScsiStatus OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Error Log SCSI Status.
This is the SCSI Status Code byte associated with the error log
entry. For further specifications consult a SCSI-2 logical
specification or other SCSI reference."
::= { cpqDaPhyDrvErrEntry 6 }
cpqDaPhyDrvCamStatus OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Error Log CAM Status.
This is the SCSI CAM Status byte associated with the error log
entry. For further specifications consult a SCSI-2 logical
specification or other SCSI reference."
::= { cpqDaPhyDrvErrEntry 7 }
cpqDaPhyDrvSenseKey OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Error Log Sense Key.
This is the SCSI Sense Key byte associated with the error log
entry. For further specifications consult a SCSI-2 logical
specification or other SCSI reference."
::= { cpqDaPhyDrvErrEntry 8 }
cpqDaPhyDrvQualifier OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Error Log Qualifier.
This is the SCSI Additional Sense Code Qualifier byte (as returned
by the Request Sense command) associated with the error log entry.
For further specifications consult a SCSI-2 logical specification
or other SCSI reference."
::= { cpqDaPhyDrvErrEntry 9 }
cpqDaPhyDrvSenseCode OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Error Log Sense Code.
This is the SCSI Sense Code associated with the error log entry.
For further specifications consult a SCSI-2 logical specification
or other SCSI reference."
::= { cpqDaPhyDrvErrEntry 10 }
cpqDaPhyDrvBlockValid OBJECT-TYPE
SYNTAX INTEGER
{
false(1),
true(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Error Log Block Address Is Valid.
The valid values are:
False (1)
Indicates that the Block Address object (cpqDaPhyDrvBlock)
is not a valid address.
True (2)
Indicates that the Block Address object (cpqDaPhyDrvBlock)
is a valid address."
::= { cpqDaPhyDrvErrEntry 11 }
cpqDaPhyDrvBlock OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Error Log Block Address.
This is the SCSI Block Address (as returned by the Request Sense
Command) associated with the error log entry. For further
specifications consult a SCSI-2 logical specification or other
SCSI reference."
::= { cpqDaPhyDrvErrEntry 12 }
cpqDaPhyDrvTime OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Error Log Reference Time.
This gives a relative time stamp as to when the error log entry
occurred. The Reference Time shows the number of hours that a
physical drive has been spinning since the drive was initialized
for monitor and performance."
::= { cpqDaPhyDrvErrEntry 13 }
cpqDaPhyDrvUserDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Physical Drive Error Log User Description.
This is a string built by the agent which contains the Reference
Time (cpqDaPhyDrvTime) and a brief description of the disk error
associated with the particular error log entry. This field is
being deprecated, and future management station applications
should be aware that this field may not contain ASCII
string data."
::= { cpqDaPhyDrvErrEntry 14 }
cpqDaPhyDrvErrDesc OBJECT-TYPE
SYNTAX INTEGER {
driveFailure(1),
commFailure(2),
driveIOError(3),
scsiCommError(4),
compaqUpgradeRequired(5),
driveWriteProtected(6),
invalidRequest(7),
scsiMessageError(8),
controllerFailure(9),
internExternConflict(10),
internalDriveFailure(11),
scsiErrorOutOfRange(12),
camErrorOutOfRange(13),
errorTypeOutOfRange(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index used to display an error associated with a physical drive.
This number refers to an entry in a list of error strings
enumerating the possible physical drive errors associated with
a particular physical disk drive.
The valid values are:
DriveFailure (1)
The Management Station should display the following string:
'Drive Failure'.
CommFailure(2)
The Management Station should display the following string:
'Communication Failure'.
DriveIOError(3)
The Management Station should display the following string:
'Drive I/O Error'.
SCSICommError(4)
The Management Station should display the following string:
'SCSI Communication Error'.
UpgradeRequired(5)
The Management Station should display the following string:
'Configuration Utility or OS upgrade required'.
DriveWriteProtected(6)
The Management Station should display the following string:
'Drive Write Protected - Check Drive Jumpers'.
InvalidRequest(7)
The Management Station should display the following string:
'Invalid Request'.
SCSIMessageError(8)
The Management Station should display the following string:
'SCSI Message Error'.
ControllerFailure(9)
The Management Station should display the following string:
'Controller Failure'.
InternalExternalConflict(10)
The Management Station should display the following string:
'Internal/External Conflict on Port 1'.
InternalDriveFailure(11)
The Management Station should display the following string:
'Internal Drive Failure'.
SCSIErrorOutOfRange(12)
The Management Station should display the following string:
'SCSI Error, Sense Code = %xh' where %x is the value of the
cpqDaPhyDrvSenseCode object. This index will only be provided
if the specified object exceeds the valid range.
CAMErrorOutOfRange(13)
The Management Station should display the following string:
'CAM Error, CAM status =%xh' where %x is the value of the
cpqDaPhyDrvCamStatus object. This index will only be provided
if the specified object exceeds the valid range.
ErrorTypeOutOfRange(14)
The Management Station should display the following string:
'Error type =%xh' where %x is the value of the
cpqDaPhyDrvErrType object. This index will only be provided
if the specified object exceeds the valid range. "
::= { cpqDaPhyDrvErrEntry 15 }
-- ****************************************************************************
-- Drive Array Physical Drive Path Table
-- =====================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaPhyDrv Group (1.3.6.1.4.1.232.3.2.5)
-- cpqDaPhyDrvPathTable (1.3.6.1.4.1.232.3.2.5.3)
--
-- ****************************************************************************
cpqDaPhyDrvPathTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaPhyDrvPathEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Access Path Table.
A table of access path entries supporting physical drive multi-path
cabling configuration."
::= { cpqDaPhyDrv 3 }
cpqDaPhyDrvPathEntry OBJECT-TYPE
SYNTAX CpqDaPhyDrvPathEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Access Path Entry."
INDEX { cpqDaPhyDrvPathCntlrIndex, cpqDaPhyDrvPathDrvIndex,
cpqDaPhyDrvPathIndex }
::= { cpqDaPhyDrvPathTable 1 }
CpqDaPhyDrvPathEntry ::= SEQUENCE
{
cpqDaPhyDrvPathCntlrIndex INTEGER,
cpqDaPhyDrvPathDrvIndex INTEGER,
cpqDaPhyDrvPathIndex INTEGER,
cpqDaPhyDrvPathStatus INTEGER,
cpqDaPhyDrvPathCurrentRole INTEGER,
cpqDaPhyDrvPathHostConnector DisplayString,
cpqDaPhyDrvPathBoxOnConnector INTEGER,
cpqDaPhyDrvPathLocationString DisplayString
}
cpqDaPhyDrvPathCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Access Path Controller Index.
This index maps the physical drive access path back to the
controller to which it is attached. The value of this index
is the same as the one used under the controller group."
::= { cpqDaPhyDrvPathEntry 1 }
cpqDaPhyDrvPathDrvIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Access Path Drive Index.
This index maps the access path to a physical drive."
::= { cpqDaPhyDrvPathEntry 2 }
cpqDaPhyDrvPathIndex OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Access Path Index.
This path index keeps track of multiple instances of access
paths from a controller to a physical drive. This number,
along with the cpqDaPhyDrvPathCntlrIndex and
cpqDaPhyDrvPathDrvIndex uniquely identify a specific physical
drive access path."
::= { cpqDaPhyDrvPathEntry 3 }
cpqDaPhyDrvPathStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
linkDown(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Access Path Status.
This shows the status of the physical drive access path. The
following values are valid:
Other (1)
Indicates that the instrument agent can not determine the
status of this access path.
OK (2)
Indicates the access path is functioning properly.
Link Down (3)
Indicates that the controller can no longer access the
physical drive through this path."
::= { cpqDaPhyDrvPathEntry 4 }
cpqDaPhyDrvPathCurrentRole OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
active(2),
alternate(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Access Path Current Role.
This shows the current role of physical drive access path.
The following values are valid:
Other (1)
Indicates that the instrument agent does not recognize the
role of this access path.
Active (2)
Indicates that this path is currently the default active
I/O path to access the physical drive from the controller.
Alternate (3)
Indicates that this path is currently the alternate I/O
path to access the physical drive from the controller."
::= { cpqDaPhyDrvPathEntry 5 }
cpqDaPhyDrvPathHostConnector OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Access Path Host Connector.
This is the host connector to which the access path is ultimately
attached. If the host connector cannot be determined, the agent
will return a NULL string."
::= { cpqDaPhyDrvPathEntry 6 }
cpqDaPhyDrvPathBoxOnConnector OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Access Path Box on Connector.
The box on connector indicates to which box instance this
physical drive access path belongs."
::= { cpqDaPhyDrvPathEntry 7 }
cpqDaPhyDrvPathLocationString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Access Path Location String.
This string describes the physical drive access path in relation
to the controller. If the location string cannot be determined,
the agent will return a NULL string."
::= { cpqDaPhyDrvPathEntry 8 }
-- ****************************************************************************
-- Drive Array Physical Drive Threshold Table
-- ==========================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaPhyDrvThr Group (1.3.6.1.4.1.232.3.2.6)
-- cpqDaPhyDrvThrTable (1.3.6.1.4.1.232.3.2.6.1)
--
-- ****************************************************************************
cpqDaPhyDrvThrTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaPhyDrvThrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Threshold Table.
A table of physical drive threshold entries."
::= { cpqDaPhyDrvThr 1 }
cpqDaPhyDrvThrEntry OBJECT-TYPE
SYNTAX CpqDaPhyDrvThrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Threshold Entry.
A physical drive threshold entry."
INDEX { cpqDaPhyDrvThrCntlrIndex, cpqDaPhyDrvThrIndex }
::= { cpqDaPhyDrvThrTable 1 }
CpqDaPhyDrvThrEntry ::= SEQUENCE
{
cpqDaPhyDrvThrCntlrIndex INTEGER,
cpqDaPhyDrvThrIndex INTEGER,
cpqDaPhyDrvThrUsedReallocs INTEGER,
cpqDaPhyDrvThrRefHours INTEGER,
cpqDaPhyDrvThrHardReadErrs INTEGER,
cpqDaPhyDrvThrRecvReadErrs INTEGER,
cpqDaPhyDrvThrHardWriteErrs INTEGER,
cpqDaPhyDrvThrRecvWriteErrs INTEGER,
cpqDaPhyDrvThrHSeekErrs INTEGER,
cpqDaPhyDrvThrSeekErrs INTEGER,
cpqDaPhyDrvThrSpinupTime INTEGER,
cpqDaPhyDrvThrFunctTest1 INTEGER,
cpqDaPhyDrvThrFunctTest2 INTEGER,
cpqDaPhyDrvThrFunctTest3 INTEGER,
cpqDaPhyDrvThrDrqTimeouts INTEGER,
cpqDaPhyDrvThrOtherTimeouts INTEGER,
cpqDaPhyDrvThrSpinupRetries INTEGER,
cpqDaPhyDrvThrBadRecvReads INTEGER,
cpqDaPhyDrvThrBadRecvWrites INTEGER,
cpqDaPhyDrvThrFormatErrs INTEGER,
cpqDaPhyDrvThrPostErrs INTEGER,
cpqDaPhyDrvThrNotReadyErrs INTEGER,
cpqDaPhyDrvThrReallocAborts INTEGER,
cpqDaPhyDrvThrHotPlugs INTEGER,
cpqDaPhyDrvThrMediaErrs INTEGER,
cpqDaPhyDrvThrHardwareErrs INTEGER,
cpqDaPhyDrvThrAbortedCmds INTEGER,
cpqDaPhyDrvThrSpinUpErrs INTEGER,
cpqDaPhyDrvThrBadTargetErrs INTEGER,
cpqDaPhyDrvThrViUsedReallocs INTEGER,
cpqDaPhyDrvThrViSpinupTime INTEGER,
cpqDaPhyDrvThrViFunctTest1 INTEGER,
cpqDaPhyDrvThrViFunctTest2 INTEGER,
cpqDaPhyDrvThrViFunctTest3 INTEGER,
cpqDaPhyDrvThrBusFaults INTEGER,
cpqDaPhyDrvThrIrqDeglitches INTEGER
}
cpqDaPhyDrvThrCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Threshold Controller Index.
This index maps the physical drive thresholds back to the
controller to which it is attached. The value of this
index is the same as the one used under the controller group."
::= { cpqDaPhyDrvThrEntry 1 }
cpqDaPhyDrvThrIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Physical Drive Threshold Index.
This index maps the thresholds to a physical drive. The value
of this index is the same as the one used with the physical
drive table."
::= { cpqDaPhyDrvThrEntry 2 }
cpqDaPhyDrvThrUsedReallocs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Used Reallocated Sectors Maximum Threshold.
This shows the maximum threshold of the reallocation area that
has been used by the physical drive.
This threshold is associated with the cpqDaPhyDrvUsedReallocs
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 3 }
cpqDaPhyDrvThrRefHours OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reference Time Maximum Threshold in hours.
This shows the maximum threshold in hours that a physical drive
has been spinning since the drive was stamped.
This threshold is associated with the cpqDaPhyDrvRefHours
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 4 }
cpqDaPhyDrvThrHardReadErrs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Hard Read Errors Maximum Threshold.
This shows the maximum threshold of read errors on a drive that
could not be recovered by a physical drive's Error Correction
Code (ECC) algorithm or through retries during the reference
time (phyDrvRefTime).
This threshold is associated with the cpqDaPhyDrvHardReadErrs
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 5 }
cpqDaPhyDrvThrRecvReadErrs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Recovered Read Errors Maximum Threshold.
This shows the maximum threshold of read errors corrected through
physical drive retries during the reference time (phyDrvRefTime).
This threshold is associated with the cpqDaPhyDrvRecvReadErrs
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 6 }
cpqDaPhyDrvThrHardWriteErrs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Hard Write Errors Maximum Threshold.
This shows the maximum threshold of write errors that could not
be recovered by a physical drive during the reference time
(phyDrvRefTime).
This threshold is associated with the cpqDaPhyDrvHardWriteErrs
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 7 }
cpqDaPhyDrvThrRecvWriteErrs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Recovered Write Errors Maximum Threshold.
This shows the maximum threshold of write errors corrected through
physical drive retries or recovered by a physical drive during the
reference time (phyDrvRefTime).
This threshold is associated with the cpqDaPhyDrvRecvWriteErrs
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 8 }
cpqDaPhyDrvThrHSeekErrs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Seek Errors Maximum Threshold (high).
The cpqDaphyDrvThrHSeekErrs and the cpqDaphyDrvThrSeekErrs
together show the maximum threshold of total number of
times that the physical disk drive detected a seek error
during the reference hours (phyDrvRefHours).
This threshold is associated with the cpqDaPhyDrvHSeekErrs
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 9 }
cpqDaPhyDrvThrSeekErrs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Seek Errors Maximum Threshold (low).
The cpqDaphyDrvThrHSeekErrs and the cpqDaphyDrvThrSeekErrs
together show the maximum threshold of total number of times
that the physical disk drive detected a seek error during
the reference hours (phyDrvRefHours).
This threshold is associated with the cpqDaPhyDrvSeekErrs
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 10 }
cpqDaPhyDrvThrSpinupTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Spin up Time Maximum Threshold in tenths of seconds.
This shows the maximum of time it takes for a physical drive to
spin up to full speed.
This threshold is associated with the cpqDaPhyDrvSpinupTime
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 11 }
cpqDaPhyDrvThrFunctTest1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Functional Test 1 Minimum Threshold.
This provides the minimum threshold for information about a series
of tests that indicate how well a physical drive works. These
tests compare the way the physical drive currently operate
when performing various tasks with the way it worked when it
was new.
This threshold is associated with the cpqDaPhyDrvFunctTest1
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 12 }
cpqDaPhyDrvThrFunctTest2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Functional Test 2 Minimum Threshold.
This provides the minimum threshold for information about a
series of tests that indicate how well a physical drive works.
These tests compare the way the physical drive currently
operates when performing various tasks with the way it worked
when it was new.
This threshold is associated with the cpqDaPhyDrvFunctTest2
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 13 }
cpqDaPhyDrvThrFunctTest3 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Functional Test 3 Minimum Threshold.
This provides the minimum threshold for information about a
series of tests that indicate how well a physical drive works.
These tests compare the way the physical drive currently operates
when performing various tasks with the way it worked when it was
new.
This threshold is associated with the cpqDaPhyDrvFunctTest3
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 14 }
cpqDaPhyDrvThrDrqTimeouts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"DRQ Timeouts Maximum Threshold.
This shows the maximum threshold of the number of times that a
physical drive continued to request data, but did not get a
command completion during the reference time (phyDrvRefTime).
This threshold is associated with the cpqDaPhyDrvDrqTimeouts
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 15 }
cpqDaPhyDrvThrOtherTimeouts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Other Timeouts Maximum Threshold.
This shows the maximum threshold of the number of times that a
physical drive did not respond with an interrupt within a
controller-defined period of time after a command had been
issued during the reference time (phyDrvRefTime).
This threshold is associated with the cpqDaPhyDrvOtherTimeouts
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 16 }
cpqDaPhyDrvThrSpinupRetries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Spin up Retries Maximum Threshold.
This shows the maximum threshold of the number of times that a
physical drive had to retry to spin up before successfully
achieving operating speed during the reference time
(phyDrvRefTime).
This threshold is associated with the cpqDaPhyDrvSpinupRetries
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 17 }
cpqDaPhyDrvThrBadRecvReads OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Recovery Failed (Bad) Read Error Maximum Threshold.
This shows the maximum threshold of the number of times a read
error occurred while performing Automatic Data Recovery from
this physical drive to another drive during the reference time
(phyDrvRefTime).
This threshold is associated with the cpqDaPhyDrvBadRecvReads
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 18 }
cpqDaPhyDrvThrBadRecvWrites OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Recovery Failed (Bad) Write Error Maximum Threshold.
This shows the maximum threshold of the number of times a write
error occurred while performing Automatic Data Recovery from
another drive to this physical drive during the reference time
(phyDrvRefTime).
This threshold is associated with the cpqDaPhyDrvBadRecvWrites
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 19 }
cpqDaPhyDrvThrFormatErrs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Format Error Maximum Threshold.
This shows the maximum threshold of the number of times a format
operation failed when the controller attempted to remap a bad
sector during the reference time (phyDrvRefTime).
This threshold is associated with the cpqDaPhyDrvFormatErrs
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 20 }
cpqDaPhyDrvThrPostErrs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power On Self Test (Post) Error Maximum Threshold.
This shows the maximum threshold of the number of times that a
physical drive failed its self test during the reference time
(phyDrvRefTime).
This threshold is associated with the cpqDaPhyDrvPostErrs
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 21 }
cpqDaPhyDrvThrNotReadyErrs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Not Ready Errors Maximum Threshold.
This shows the maximum threshold of the number of times the
physical drive failed after the spin up command was issued
during the reference time (phyDrvRefTime). When the spin up
command was issued, the drive failed to reach its ready
state.
This threshold is associated with the cpqDaPhyDrvNotReadyErrs
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 22 }
cpqDaPhyDrvThrReallocAborts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Reallocation Aborts Maximum Threshold.
This shows the maximum threshold of the number of times the
physical drive has failed due to an error that occurred when
the controller was trying to reallocate a bad sector during
the reference time (phyDrvRefTime).
This threshold is associated with the cpqDaPhyDrvReallocAborts
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 23 }
cpqDaPhyDrvThrHotPlugs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Hot Plug Count Maximum Threshold.
This shows the maximum threshold of the number of times this
physical drive can be hot-plugged (removed) from a ProLiant
Storage System.
This threshold is associated with the cpqDaPhyDrvHotPlugs
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 24 }
cpqDaPhyDrvThrMediaErrs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Media Failure Count Maximum Threshold.
This shows the maximum threshold of the number of times this
physical drive can be failed due to unrecoverable media errors.
This threshold is associated with the cpqDaPhyDrvMediaErrs
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 25 }
cpqDaPhyDrvThrHardwareErrs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Hardware Error Count Maximum Threshold.
This shows the maximum threshold of the number of times this
physical drive can return a bad hardware status. The drive may
be failed if retries do not work. This is not supported by the
IDA, IDA Expansion, or IDA-2 controllers.
This threshold is associated with the cpqDaPhyDrvHardwareErrs
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 26 }
cpqDaPhyDrvThrAbortedCmds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Aborted Command Failures Maximum Threshold.
This shows the maximum threshold of the number of times this
physical drive can be failed due to aborted commands that could
not be retried successfully. This is not supported by the IDA,
IDA Expansion, or IDA-2 controllers.
This threshold is associated with the cpqDaPhyDrvAbortedCmds
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 27 }
cpqDaPhyDrvThrSpinUpErrs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Spin-Up Failure Count Maximum Threshold.
This shows the maximum threshold of the number of times this
physical drive was failed due to a failure of a spin-up command.
This is not supported by the IDA, IDA Expansion, or IDA-2
controllers.
This threshold is associated with the cpqDaPhyDrvSpinUpErrs
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 28 }
cpqDaPhyDrvThrBadTargetErrs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Bad Target Count Maximum Threshold.
This shows the maximum threshold of the number of times this
physical drive can perform some action that did not conform to
the SCSI-2 bus protocol. These actions will cause the SCSI bus
to be reset. This is not supported by the IDA, IDA Expansion,
or IDA-2 controllers.
This threshold is associated with the cpqDaPhyDrvBadTargetErrs
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 29 }
cpqDaPhyDrvThrViUsedReallocs OBJECT-TYPE
SYNTAX INTEGER
{
false(1),
true(2),
unknown(4294967295)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Used Reallocated Sectors Threshold Has Been Violated.
This is used to indicate whether the number of used sectors of
the reallocation area for a physical drive has ever exceeded
the maximum allowable threshold.
The valid values are:
false (1)
Indicates that the Used Reallocated Sectors object
(cpqDaPhyDrvUsedReallocs) value has not exceeded
the maximum threshold (cpqDaPhyDrvThrUsedReallocs).
true (2)
Indicates that the Used Reallocated Sectors object
(cpqDaPhyDrvUsedReallocs) value has exceeded
the maximum threshold (cpqDaPhyDrvThrUsedReallocs).
unknown (4294967295)
The agent is unable to determine if the drive has a
threshold violation."
::= { cpqDaPhyDrvThrEntry 30 }
cpqDaPhyDrvThrViSpinupTime OBJECT-TYPE
SYNTAX INTEGER
{
false(1),
true(2),
unknown(4294967295)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Spin up Time in tenths of seconds Threshold Has Been Violated.
This is used to indicate whether the time it took for a physical
drive to spin up to full speed has ever exceeded the maximum
allowable threshold.
The valid values are:
false (1)
Indicates that the Spin up Time object (cpqDaPhyDrvSpinupTime)
value has not exceeded the maximum threshold
(cpqDaPhyDrvThrSpinupTime).
true (2)
Indicates that the Spin up Time object (cpqDaPhyDrvSpinupTime)
value has exceeded the maximum threshold
(cpqDaPhyDrvThrSpinupTime).
unknown (4294967295)
The agent is unable to determine if the drive has a
threshold violation."
::= { cpqDaPhyDrvThrEntry 31 }
cpqDaPhyDrvThrViFunctTest1 OBJECT-TYPE
SYNTAX INTEGER
{
false(1),
true(2),
unknown(4294967295)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Functional Test 1 Threshold Has Been Violated.
This is used to indicate whether the percentage value returned
from Functional Test 1 has every dropped below the allowable
threshold for that test.
The valid values are:
false (1)
Indicates that the Functional Test 1 object
(cpqDaPhyDrvFunctTest1) value has not fallen below the
minimum threshold (cpqDaPhyDrvThrFunctTest1).
true (2)
Indicates that the Functional Test 1 object
(cpqDaPhyDrvFunctTest1) value has fallen below
the minimum threshold (cpqDaPhyDrvThrFunctTest1).
unknown (4294967295)
The agent is unable to determine if the drive has a
threshold violation."
::= { cpqDaPhyDrvThrEntry 32 }
cpqDaPhyDrvThrViFunctTest2 OBJECT-TYPE
SYNTAX INTEGER
{
false(1),
true(2),
unknown(4294967295)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Functional Test 2 Threshold Has Been Violated.
This is used to indicate whether the percentage value returned
from Functional Test 2 has every dropped below the allowable
threshold for that test.
The valid values are:
false (1)
Indicates that the Functional Test 2 object
(cpqDaPhyDrvFunctTest2) value has not fallen below
the minimum threshold (cpqDaPhyDrvThrFunctTest2).
true (2)
Indicates that the Functional Test 2 object
(cpqDaPhyDrvFunctTest2) value has fallen below
the minimum threshold (cpqDaPhyDrvThrFunctTest2).
unknown (4294967295)
The agent is unable to determine if the drive has a
threshold violation."
::= { cpqDaPhyDrvThrEntry 33 }
cpqDaPhyDrvThrViFunctTest3 OBJECT-TYPE
SYNTAX INTEGER
{
false(1),
true(2),
unknown(4294967295)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Functional Test 3 Threshold Has Been Violated.
This is used to indicate whether the percentage value returned
from Functional Test 3 has every dropped below the allowable
threshold for that test.
The valid values are:
false (1)
Indicates that the Functional Test 3 object
(cpqDaPhyDrvFunctTest3) value has not fallen below
the minimum threshold (cpqDaPhyDrvThrFunctTest3).
true (2)
Indicates that the Functional Test 3 object
(cpqDaPhyDrvFunctTest3) value has fallen below
the minimum threshold (cpqDaPhyDrvThrFunctTest3).
unknown (4294967295)
The agent is unable to determine if the drive has a
threshold violation."
::= { cpqDaPhyDrvThrEntry 34 }
cpqDaPhyDrvThrBusFaults OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive Bus Fault Count Maximum Threshold.
This shows the maximum threshold of the number of times this
physical drive can return a bus fault status. The drive may
be failed if retries do not work. This is not supported by the
IDA, IDA Expansion, or IDA-2 controllers.
This threshold is associated with the cpqDaPhyDrvBusFaults
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 35 }
cpqDaPhyDrvThrIrqDeglitches OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical Drive IRQ Deglitch Count Maximum Threshold.
This shows the maximum threshold of the number of times this
physical drive can return a IRQ deglitch status. The drive may
be failed if retries do not work. This is not supported by the
IDA, IDA Expansion, or IDA-2 controllers.
This threshold is associated with the cpqDaPhyDrvIrqDeglitches
object in the Physical Drive Table."
::= { cpqDaPhyDrvThrEntry 36 }
-- ****************************************************************************
-- Drive Array Controller Performance Monitoring Table
-- ===================================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaCntlrPerf Group (1.3.6.1.4.1.232.3.2.7)
-- cpqDaCntlrPerfTable (1.3.6.1.4.1.232.3.2.7.1)
--
-- The cpqDaCntlrPerf group contains performance monitoring
-- information for the SMART-2 Drive Array controllers.
--
-- Implementation of the cpqDaCntlrPerfTable group is mandatory for
-- all agents that support the Drive Array MIB.
--
-- ****************************************************************************
cpqDaCntlrPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaCntlrPerfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Controller Performance Monitor Table.
A table of controller entries supporting the performance monitor
information."
::= { cpqDaCntlrPerf 1 }
cpqDaCntlrPerfEntry OBJECT-TYPE
SYNTAX CpqDaCntlrPerfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Controller Performance Monitor Entry.
A performance monitor entry."
INDEX { cpqDaCntlrPerfCntlrIndex, cpqDaCntlrPerfInstance }
::= { cpqDaCntlrPerfTable 1 }
CpqDaCntlrPerfEntry ::= SEQUENCE
{
cpqDaCntlrPerfCntlrIndex INTEGER,
cpqDaCntlrPerfInstance INTEGER,
cpqDaCntlrPerfSampleInterval INTEGER,
cpqDaCntlrPerfVersion INTEGER,
cpqDaCntlrPerfCpuPercentBusy INTEGER,
cpqDaCntlrPerfCommandCount INTEGER,
cpqDaCntlrPerfAvgLatency INTEGER
}
cpqDaCntlrPerfCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Controller Performance Monitor Controller Index.
This maps the performance monitor information into their
respective controllers which support performance data."
::= { cpqDaCntlrPerfEntry 1 }
cpqDaCntlrPerfInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Controller Performance Monitor Instance Index.
This maps the performance monitor information for a specific
controller and sample interval to controllers which support
performance data."
::= { cpqDaCntlrPerfEntry 2 }
cpqDaCntlrPerfSampleInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Performance Monitor Sample Interval.
This value indicates the length of the performance interval
for this controller and all logical volumes associated with
this controller. This value is reported in seconds."
::= { cpqDaCntlrPerfEntry 3 }
cpqDaCntlrPerfVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Performance Monitor Version.
This value specifies the version of the performance monitor
interface."
::= { cpqDaCntlrPerfEntry 4 }
cpqDaCntlrPerfCpuPercentBusy OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Performance Monitor Cpu Percent Busy.
This value specifies the total CPU percent busy as a number
from 0 to 100 inclusive. If the value cannot be determined
or is not applicable, the value is set to -1."
::= { cpqDaCntlrPerfEntry 5 }
cpqDaCntlrPerfCommandCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Performance Monitor Command Count.
This value shows the total number of read and write commands
processed in this sample. This value is expressed in read and
write commands per second."
::= { cpqDaCntlrPerfEntry 6 }
cpqDaCntlrPerfAvgLatency OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Controller Performance Monitor Average
Command Latency.
This value shows the average command latency for this sample
in 1/100,000 second units."
::= { cpqDaCntlrPerfEntry 7 }
-- ****************************************************************************
-- Drive Array Logical Drive Performance Monitoring Table
-- ======================================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaLogDrvPerf Group (1.3.6.1.4.1.232.3.2.8)
-- cpqDaLogDrvPerfTable (1.3.6.1.4.1.232.3.2.8.1)
--
-- The cpqDaLogDrvPerf group contains performance monitoring
-- information for the SMART-2 Drive Array logical drives.
--
-- Implementation of the cpqDaLogDrvPerfTable group is mandatory for
-- all agents that support the Drive Array MIB.
--
-- ****************************************************************************
cpqDaLogDrvPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaLogDrvPerfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Performance Monitor Table.
A table of logical drive entries supporting the performance
monitor information."
::= { cpqDaLogDrvPerf 1 }
cpqDaLogDrvPerfEntry OBJECT-TYPE
SYNTAX CpqDaLogDrvPerfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Performance Monitor Entry.
A performance monitor entry."
INDEX { cpqDaLogDrvPerfCntlrIndex, cpqDaLogDrvPerfIndex,
cpqDaLogDrvPerfInstance }
::= { cpqDaLogDrvPerfTable 1 }
CpqDaLogDrvPerfEntry ::= SEQUENCE
{
cpqDaLogDrvPerfCntlrIndex INTEGER,
cpqDaLogDrvPerfIndex INTEGER,
cpqDaLogDrvPerfInstance INTEGER,
cpqDaLogDrvPerfSampleInterval INTEGER,
cpqDaLogDrvPerfAvgQueueDepth INTEGER,
cpqDaLogDrvPerfReads INTEGER,
cpqDaLogDrvPerfWrites INTEGER,
cpqDaLogDrvPerfTotalIO INTEGER,
cpqDaLogDrvPerfCacheHits INTEGER,
cpqDaLogDrvPerfCacheMisses INTEGER,
cpqDaLogDrvPerfReadAheadSectors INTEGER,
cpqDaLogDrvPerfSectorsRead INTEGER,
cpqDaLogDrvPerfSectorsWritten INTEGER
}
cpqDaLogDrvPerfCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Performance Monitor Controller Index.
This maps the performance monitor information into their
respective controllers which support performance data."
::= { cpqDaLogDrvPerfEntry 1 }
cpqDaLogDrvPerfIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Performance Monitor Drive Index.
This maps the performance monitor information into their
respective logical drives which support performance data."
::= { cpqDaLogDrvPerfEntry 2 }
cpqDaLogDrvPerfInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Logical Drive Performance Monitor Instance Index.
This maps the performance monitor information for a specific
controller, logical drive and sample interval to controllers
which support performance data."
::= { cpqDaLogDrvPerfEntry 3 }
cpqDaLogDrvPerfSampleInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Logical Drive Performance Monitor Sample Interval.
This value indicates the length of the performance interval
for this controller and all logical volumes associated with
this controller. This value is reported in seconds."
::= { cpqDaLogDrvPerfEntry 4 }
cpqDaLogDrvPerfAvgQueueDepth OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Logical Drive Performance Monitor Average Queue Depth.
This value indicates the average command queue depth of the
logical volume."
::= { cpqDaLogDrvPerfEntry 5 }
cpqDaLogDrvPerfReads OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Logical Drive Performance Monitor Reads.
This value is the count of read requests for the logical volume
expressed in reads per second."
::= { cpqDaLogDrvPerfEntry 6 }
cpqDaLogDrvPerfWrites OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Logical Drive Performance Monitor Writes.
This value is the count of write requests for the logical volume
expressed in writes per second."
::= { cpqDaLogDrvPerfEntry 7 }
cpqDaLogDrvPerfTotalIO OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Logical Drive Performance Monitor Total I/O.
This value shows the total number of read and write requests
for the logical volume expressed in reads and writes per second."
::= { cpqDaLogDrvPerfEntry 8 }
cpqDaLogDrvPerfCacheHits OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Logical Drive Performance Monitor Cache Hits.
This value shows the total number of read cache hits for the
logical volume. This value is expressed in cache hits per
second."
::= { cpqDaLogDrvPerfEntry 9 }
cpqDaLogDrvPerfCacheMisses OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Logical Drive Performance Monitor Cache Misses.
This value shows the total number of read cache misses for the
logical volume. This value is expressed in cache misses per
second."
::= { cpqDaLogDrvPerfEntry 10 }
cpqDaLogDrvPerfReadAheadSectors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Logical Drive Performance Monitor Read Ahead Sectors.
This value shows the total number read ahead sectors pre-fetched
for the logical volume for this interval. This value is expressed
in sectors per second."
::= { cpqDaLogDrvPerfEntry 11 }
cpqDaLogDrvPerfSectorsRead OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Logical Drive Performance Monitor Sectors Read.
This value shows the number of sectors read for the logical
volume for this interval. This value is expressed in sectors
per second."
::= { cpqDaLogDrvPerfEntry 12 }
cpqDaLogDrvPerfSectorsWritten OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Array Logical Drive Performance Monitor Sectors Written.
This value shows the number of sectors written for the logical
volume for this interval. This value is expressed in sectors
per second."
::= { cpqDaLogDrvPerfEntry 13 }
-- ****************************************************************************
-- Drive Array Tape Drive Group
-- ================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaTapeDrv Group (1.3.6.1.4.1.232.3.2.9)
-- cpqDaTapeDrvTable (1.3.6.1.4.1.232.3.2.9.1)
--
-- The cpqDaTapeDrv group contains configuration and statistical
-- information about the tape drives associated with drive array
-- controllers.
--
-- Implementation of the cpqDaTapeDrv group is mandatory for all agents
-- that support the Drive Array MIB.
--
-- ****************************************************************************
cpqDaTapeDrvTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaTapeDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Table.
A table of tape drive entries."
::= { cpqDaTapeDrv 1 }
cpqDaTapeDrvEntry OBJECT-TYPE
SYNTAX CpqDaTapeDrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Entry.
A tape drive entry."
INDEX { cpqDaTapeDrvCntlrIndex, cpqDaTapeDrvBusIndex,
cpqDaTapeDrvScsiIdIndex, cpqDaTapeDrvLunIndex }
::= { cpqDaTapeDrvTable 1 }
CpqDaTapeDrvEntry ::= SEQUENCE
{
cpqDaTapeDrvCntlrIndex INTEGER,
cpqDaTapeDrvBusIndex INTEGER,
cpqDaTapeDrvScsiIdIndex INTEGER,
cpqDaTapeDrvLunIndex INTEGER,
cpqDaTapeDrvName DisplayString,
cpqDaTapeDrvSerialNumber DisplayString,
cpqDaTapeDrvFwRev DisplayString,
cpqDaTapeDrvStatus INTEGER,
cpqDaTapeDrvCondition INTEGER,
cpqDaTapeDrvFwSubtype INTEGER,
cpqDaTapeDrvType INTEGER,
cpqDaTapeDrvCleanReq INTEGER,
cpqDaTapeDrvCleanTapeRepl INTEGER,
cpqDaTapeDrvCleanTapeCount INTEGER,
cpqDaTapeDrvLibraryDrive INTEGER,
cpqDaTapeDrvMagSize INTEGER,
cpqDaTapeDrvHotPlug INTEGER,
cpqDaTapeDrvPlacement INTEGER,
cpqDaTapeDrvCurrentWidth INTEGER,
cpqDaTapeDrvCurrentSpeed INTEGER,
cpqDaTapeDrvProtocol INTEGER,
cpqDaTapeDrvNegotiatedLinkRate INTEGER
}
cpqDaTapeDrvCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Controller Index.
This index maps the tape drive back to the controller to which
it is attached. The value of this index is the same as the one
used under the controller group."
::= { cpqDaTapeDrvEntry 1 }
cpqDaTapeDrvBusIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive SCSI Bus Index.
This is the controller SCSI bus to which the tape drive is
attached."
::= { cpqDaTapeDrvEntry 2 }
cpqDaTapeDrvScsiIdIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive SCSI Index.
This is the SCSI Target Id of the tape drive."
::= { cpqDaTapeDrvEntry 3 }
cpqDaTapeDrvLunIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Logical Unit Number Index.
This is the logical unit number of the tape drive."
::= { cpqDaTapeDrvEntry 4 }
cpqDaTapeDrvName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Model Name.
This is the model name of the tape drive. It can be used for
identification purposes."
::= { cpqDaTapeDrvEntry 5 }
cpqDaTapeDrvSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Serial Number.
This is the unit serial number for the tape drive. It can be
used for identification purposes."
::= { cpqDaTapeDrvEntry 6 }
cpqDaTapeDrvFwRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Firmware Revision.
This is firmware revision level of the tape drive. It can be
used for identification purposes."
::= { cpqDaTapeDrvEntry 7 }
cpqDaTapeDrvStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4),
offline(5),
missingWasOk(6),
missingWasOffline(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Status.
The tape drive can be in one of the following states:
other(1)
The tape drive is in a state other than one of those listed
below.
ok(2)
Indicates that the tape drive is in normal operation mode.
No user action is necessary.
degraded(3)
Indicates that the tape drive has degraded in some manner.
failed(4)
Indicates that the tape drive has failed and can no longer
return data. The tape drive may need to be replaced.
offline(5)
Indicates that the Agents can no longer communicate with the
tape drive. This could be caused by a cabling problem or the
tape drive may be powered off.
missingWasOk(6)
Indicates that a tape drive had a status of OK and is no
longer present. The drive has been removed.
missingWasOffline(7)
Indicates that a tape drive had a status of OFFLINE and is no
longer present. The drive has been removed."
::= { cpqDaTapeDrvEntry 8 }
cpqDaTapeDrvCondition OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Condition.
This value represents the overall condition of the tape drive."
::= { cpqDaTapeDrvEntry 9 }
cpqDaTapeDrvFwSubtype OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Firmware Subtype.
This is used to differentiate the firmware versions
which have the same tape drive type (as specified by
cpqDaTapeDrvType). Tape drives will contain a value
of 1 for this variable when they first ship, and this value
will be incremented if future versions are shipped which
are not firmware compatible with the predecessor. If the
tape drive does not support this capability, a value of 0
will be returned."
::= { cpqDaTapeDrvEntry 10 }
cpqDaTapeDrvType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
cpqDat4-16(2),
cpqDatAuto(3),
cpqDat2-8(4),
cpqDlt10-20(5),
cpqDlt20-40(6),
cpqDlt15-30(7),
cpqDlt35-70(8),
cpqDat4-8(9),
cpqSlr4-8(10),
cpqDat12-24(11),
cpqDatAuto12-24(12),
cpqAit35(14),
cpqAit50(15),
cpqDat20-40(16),
cpqDlt40-80(17),
cpqDatAuto20-40(18)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Type.
This is the drives model, and can be used for identification
purposes. The following values are defined:
other(1)
The management agent does not recognize this model.
You may need to upgrade your software.
cpqDat4-16(2)
Compaq 4/8-Gigabyte TurboDAT Drive.
cpqDatAuto(3)
Compaq TurboDAT Autoloader.
cpqDat2-8(4)
Compaq 2/8-Gigabyte TurboDAT Drive.
cpqDlt10-20(5)
Compaq 10/20-GB DLT Drive.
cpqDlt20-40(6)
Compaq 20/40-GB DLT Drive.
cpqDlt15-30(7)
Compaq 15/30-GB DLT Drive.
cpqDlt35-70(8)
Compaq 35/70-GB DLT Drive.
cpqDat4-8(9)
Compaq 4/8-GB DAT Drive.
cpqSlr4-8(10)
Compaq 4/8-GB SLR Drive.
cpqDat12-24(11)
Compaq 12/24-GB DAT Drive.
cpqDatAuto12-24(12)
Compaq 12/24-GB DAT Autoloader.
cpqAit35(14)
Compaq AIT 35GB Drive.
cpqAit50(15)
Compaq AIT 50GB Drive.
cpqDat20-40(16)
Compaq 20/40GB DAT Drive.
cpqDlt40-80(17)
Compaq 40/80GB DLT Drive.
cpqDatAuto20-40(18)
Compaq 20/40GB DAT Autoloader."
::= { cpqDaTapeDrvEntry 11 }
cpqDaTapeDrvCleanReq OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
true(2),
false(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Cleaning Required.
This is an indication of whether the tape drive heads
require a cleaning session to occur. If this variable
indicates a need to clean the tape heads, then a cleaning
tape will need to be inserted and run through a cleaning
cycle.
This variable can be in one of the following states:
other(1)
The tape drive does not support monitoring of the cleaning
required status.
true(2)
The tape drive requires a cleaning tape session in order
to clean the heads.
false(3)
The tape drive does not require any cleaning tape session."
::= { cpqDaTapeDrvEntry 12 }
cpqDaTapeDrvCleanTapeRepl OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
true(2),
false(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Cleaning Tape Replacement.
This variable is only applicable to autoloader tape drives.
This variable indicates whether the cleaning tape which is
inserted in an autoloader needs to be replaced because its
cleaning capability is exhausted (it is at end of tape).
This variable can be in one of the following states:
other(1)
The tape drive does not support monitoring of the cleaning
tape replacement status.
true(2)
The autoloader tape drive requires a new cleaning tape to
be inserted.
false(3)
The tape drive does not require a new cleaning tape."
::= { cpqDaTapeDrvEntry 13 }
cpqDaTapeDrvCleanTapeCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Cleaning Tape Count.
This variable is a count from a tape drive of the number of
cleanings done by the tape cleaner last in the drive."
::= { cpqDaTapeDrvEntry 14 }
cpqDaTapeDrvLibraryDrive OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
true(2),
false(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Library Drive.
This variable indicates whether or not the tape drive is part
of a tape library. It can be in one of the following states:
other(1)
Indicates that the instrument agent cannot determine if the
tape drive is part of a tape library.
true(2)
The tape drive is part of a tape library.
false(3)
The tape drive is not part of a tape library."
::= { cpqDaTapeDrvEntry 15 }
cpqDaTapeDrvMagSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Physical Drive Magazine Size.
This variable indicates the number of tape slots available in
the tape autoloader magazine cartridge that is currently loaded
into the tape drive.
For non-autoloader devices, this value will be -1."
::= { cpqDaTapeDrvEntry 16 }
cpqDaTapeDrvHotPlug OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
hotPlug(2),
nonHotPlug(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Hot Plug Support Status.
The following values are defined:
other(1)
The agent is unable to determine if this drive
supports hot plug replacement.
hotPlug(2)
The drive supports hot plug replacement.
nonhotPlug(3)
The drive does not support hot plug replacement."
::= { cpqDaTapeDrvEntry 17 }
cpqDaTapeDrvPlacement OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
internal(2),
external(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Placement.
The following values are defined:
other(1)
The agent is unable to determine if the tape drive is
internal or external to the system chassis.
internal(2)
The tape drive is located in an internal Proliant system
chassis.
external(3)
The tape drive is located in an external Proliant storage
system."
::= { cpqDaTapeDrvEntry 18 }
cpqDaTapeDrvCurrentWidth OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
narrow(2),
wide16(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Current Width.
The following values are defined:
other(1)
The agent is unable to determine the current negotiated data
transfer width for this drive.
narrow(2)
The negotiated data transfer width for this drive is narrow
(8 data bits).
wide16(3)
The negotiated data transfer width for this drive is wide
(16 data bits)."
::= { cpqDaTapeDrvEntry 19 }
cpqDaTapeDrvCurrentSpeed OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
asynchronous(2),
fast(3),
ultra(4),
ultra2(5),
ultra3(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Current Data Transfer Speed.
The following values are defined:
other(1)
The agent is unable to determine the current negotiated data
transfer speed for this drive.
asynchronous(2)
The negotiated data transfer speed for this drive is
asynchronous.
fast(3)
The negotiated data transfer speed for this drive is 10 million
transfers per second).
ultra(4)
The negotiated data transfer speed for this drive is 20 million
transfers per second.
ultra2(5)
The negotiated data transfer speed for this drive is 40 million
transfers per second.
ultra3(6)
The negotiated data transfer speed for this drive is 80 million
transfers per second."
::= { cpqDaTapeDrvEntry 20 }
cpqDaTapeDrvProtocol OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
parallelScsi(2),
sata(3),
sas(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Protocol.
The following values are defined:
other(1)
The agent is unable to determine the protocol for this drive.
parallelScsi(2)
The drive protocol is parallel SCSI.
sata(3)
The drive protocol is Serial ATA.
sas(4)
The drive protocol is Serial Attached SCSI."
::= { cpqDaTapeDrvEntry 21 }
cpqDaTapeDrvNegotiatedLinkRate OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
rate-1-5(2),
rate-3-0(3),
rate-6-0(4),
rate-12-0(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Drive Negotiated Link Rate.
The following values are defined:
other(1)
The agent is unable to determine the negotiated link rate
this drive.
rate-1-5(2)
The negotiated link rate for this drive is 1.5 Gigabits per
second.
rate-3-0(3)
The negotiated link rate for this drive is 3.0 Gigabits per
second.
rate-6-0(4)
The negotiated link rate for this drive is 6.0 Gigabits per
second.
rate-12-0(5)
The negotiated link rate for this drive is 12.0 Gigabits per
second."
::= { cpqDaTapeDrvEntry 22 }
-- ****************************************************************************
-- Drive Array Tape Counters Group
-- ================================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaTapeCounters Group (1.3.6.1.4.1.232.3.2.10)
-- cpqDaTapeCountersTable (1.3.6.1.4.1.232.3.2.10.1)
--
-- The cpqDaTapeCounters group contains the statistical information of
-- Drive Array Tape Drives.
--
-- Implementation of the cpqDaTapeCounters group is mandatory for all
-- agents that support the Drive Array MIB.
--
-- ****************************************************************************
cpqDaTapeCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaTapeCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Tape Counters Table."
::= { cpqDaTapeCounters 1 }
cpqDaTapeCountersEntry OBJECT-TYPE
SYNTAX CpqDaTapeCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Tape Counters Entry."
INDEX { cpqDaTapeCountersCntlrIndex, cpqDaTapeCountersBusIndex,
cpqDaTapeCountersScsiIdIndex, cpqDaTapeCountersLunIndex }
::= { cpqDaTapeCountersTable 1 }
CpqDaTapeCountersEntry ::= SEQUENCE
{
cpqDaTapeCountersCntlrIndex INTEGER,
cpqDaTapeCountersBusIndex INTEGER,
cpqDaTapeCountersScsiIdIndex INTEGER,
cpqDaTapeCountersLunIndex INTEGER,
cpqDaTapeCountersReWrites Counter,
cpqDaTapeCountersReReads Counter,
cpqDaTapeCountersTotalErrors Counter,
cpqDaTapeCountersTotalUncorrectable Counter,
cpqDaTapeCountersTotalBytes Counter
}
cpqDaTapeCountersCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Counters Controller Index.
This index maps the tape drive back to the controller to which
it is attached. The value of this index is the same as the one
used under the controller group."
::= { cpqDaTapeCountersEntry 1 }
cpqDaTapeCountersBusIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Counters Scsi Bus Index.
This is the controller SCSI bus to which the tape drive is
attached."
::= { cpqDaTapeCountersEntry 2 }
cpqDaTapeCountersScsiIdIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Counters SCSI Index.
This is the SCSI Target Id of the tape drive."
::= { cpqDaTapeCountersEntry 3 }
cpqDaTapeCountersLunIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Counters Logical Unit Number Index.
This is the logical unit number of the tape drive."
::= { cpqDaTapeCountersEntry 4 }
cpqDaTapeCountersReWrites OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Device Re-write count.
This is the number of times blocks had to be re-written to the
device. This value is maintained since the Tape Hardware Interface
driver was loaded.
Re-write errors may occasionally occur. If this value should rise
dramatically, you may need to clean the device. If you continue
to have re-writes, you may have a problem. Some common causes
include radio frequency interference (RFI) on the bus cables,
bad or missing terminating resisters on the drives or having more
than one device with the same SCSI ID. Insure the bus cable is
free of obstructions and that the devices on the bus are properly
configured."
::= { cpqDaTapeCountersEntry 5 }
cpqDaTapeCountersReReads OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Device Re-read count.
This is the number of times blocks had to be re-read from the
device. This value is maintained since the Tape Hardware Interface
driver was loaded.
Re-read errors may occasionally occur. If this value should rise
dramatically, you may need to clean the device. If you continue
to have re-reads, you may have a problem. Some common causes
include radio frequency interference (RFI) on the bus cables,
bad or missing terminating resisters on the drives or having more
than one device with the same SCSI ID. Insure the bus cable is
free of obstructions and that the devices on the bus are properly
configured."
::= { cpqDaTapeCountersEntry 6 }
cpqDaTapeCountersTotalErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Device Total Errors.
This is the total number of read/write errors encountered.
This value is maintained since the Tape Hardware Interface
driver was loaded.
Errors may occasionally occur. If this value should rise
dramatically, you may need to clean the device. If you continue
to have errors, you may have a problem. Some common causes include
radio frequency interference (RFI) on the bus cables, bad or
missing terminating resisters on the drives or having more than
one device with the same SCSI ID. Insure the bus cable is free
of obstructions and that the devices on the bus are properly
configured."
::= { cpqDaTapeCountersEntry 7 }
cpqDaTapeCountersTotalUncorrectable OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Device Total Uncorrectable Errors.
This is the total number of read and write errors which could not
be corrected. This value is maintained since the Tape Hardware
Interface driver was loaded.
Errors may occasionally occur. If this value should rise
dramatically, you may need to clean the device. If you continue
to have errors, you may have a problem. Some common causes include
radio frequency interference (RFI) on the bus cables, bad or
missing terminating resisters on the drives or having more than
one device with the same SCSI ID. Insure the bus cable is free
of obstructions and that the devices on the bus are properly
configured."
::= { cpqDaTapeCountersEntry 8 }
cpqDaTapeCountersTotalBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape Device Total Bytes.
This is the number total number of bytes read/written to the tape
currently installed in the device. This value is reset whenever
a new tape is inserted into the device."
::= { cpqDaTapeCountersEntry 9 }
-- ****************************************************************************
-- Drive Array Tape Library Group
-- ===============================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaComponent Group (1.3.6.1.4.1.232.3.2)
-- cpqDaTapeLibrary Group (1.3.6.1.4.1.232.3.2.11)
-- cpqDaTapeLibraryTable (1.3.6.1.4.1.232.3.2.11.1)
--
-- The tape library group contains the configuration and statistical
-- information of the Drive Array Tape Library.
--
-- Implementation of the cpqDaTapeLibrary group is mandatory for all
-- agents that support the Drive Array MIB.
--
-- ****************************************************************************
cpqDaTapeLibraryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaTapeLibraryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Table."
::= { cpqDaTapeLibrary 1 }
cpqDaTapeLibraryEntry OBJECT-TYPE
SYNTAX CpqDaTapeLibraryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Entry."
INDEX { cpqDaTapeLibraryCntlrIndex, cpqDaTapeLibraryScsiBus,
cpqDaTapeLibraryScsiTarget, cpqDaTapeLibraryScsiLun }
::= { cpqDaTapeLibraryTable 1 }
CpqDaTapeLibraryEntry ::= SEQUENCE
{
cpqDaTapeLibraryCntlrIndex INTEGER,
cpqDaTapeLibraryScsiBus INTEGER,
cpqDaTapeLibraryScsiTarget INTEGER,
cpqDaTapeLibraryScsiLun INTEGER,
cpqDaTapeLibrarySerialNumber DisplayString,
cpqDaTapeLibraryModel DisplayString,
cpqDaTapeLibraryFWRev DisplayString,
cpqDaTapeLibraryStatus INTEGER,
cpqDaTapeLibraryDoorStatus INTEGER,
cpqDaTapeLibraryCondition INTEGER,
cpqDaTapeLibraryOverallCondition INTEGER,
cpqDaTapeLibraryLastError INTEGER,
cpqDaTapeLibraryStatHours Counter,
cpqDaTapeLibraryStatMoves Counter,
cpqDaTapeLibraryDriveList OCTET STRING,
cpqDaTapeLibraryCurrentWidth INTEGER,
cpqDaTapeLibraryCurrentSpeed INTEGER,
cpqDaTapeLibraryDriveList2 OCTET STRING,
cpqDaTapeLibraryProtocol INTEGER,
cpqDaTapeLibraryNegotiatedLinkRate INTEGER
}
cpqDaTapeLibraryCntlrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Controller Index.
This index maps the tape library back to the controller to which
it is attached. The value of this index is the same as the one
used under the controller group."
::= { cpqDaTapeLibraryEntry 1 }
cpqDaTapeLibraryScsiBus OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Scsi Bus.
The bus index indicates to which SCSI bus instance on a
controller this table entry belongs. The instances start
at one and increment for each SCSI bus on a controller."
::= { cpqDaTapeLibraryEntry 2 }
cpqDaTapeLibraryScsiTarget OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Scsi Target.
The target index indicates to which SCSI ID on a controller
SCSI bus this table entry belongs."
::= { cpqDaTapeLibraryEntry 3 }
cpqDaTapeLibraryScsiLun OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Scsi Lun.
The Lun index indicates to which logical unit on a SCSI ID on a
controller SCSI bus this table entry belongs."
::= { cpqDaTapeLibraryEntry 4 }
cpqDaTapeLibrarySerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Serial Number.
This is the unit serial number for the tape library. It can be
used for identification purposes."
::= { cpqDaTapeLibraryEntry 5 }
cpqDaTapeLibraryModel OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Model.
This is the model name of the tape library. It can be used for
identification purposes."
::= { cpqDaTapeLibraryEntry 6 }
cpqDaTapeLibraryFWRev OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Serial Number.
This is firmware revision level of the tape library. It can be
used for identification purposes."
::= { cpqDaTapeLibraryEntry 7 }
cpqDaTapeLibraryStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
ok(2),
degraded(3),
failed(4),
offline(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Status.
The library can be in one of the following states:
other(1)
The library is in a state other than one of those listed
below.
ok(2)
Indicates that the library is in normal operation mode.
No user action is necessary.
degraded(3)
Indicates that the library has degraded in some manner.
failed(4)
Indicates that the library has failed and can no longer
return data. The library may need to be replaced.
offline(5)
Indicates that the Insight Agents can no longer communicate with
the library. This could be caused by a cabling problem or the
library may be powered off."
::= { cpqDaTapeLibraryEntry 8 }
cpqDaTapeLibraryDoorStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
notSupported(2),
closed(3),
open(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Door Status.
The door can be in one of the following states:
other(1)
The door is in a state other than one of those listed
below.
notSupported(2)
The door status is not supported by the device.
closed(3)
The door is closed.
open(4)
The door is open."
::= { cpqDaTapeLibraryEntry 9 }
cpqDaTapeLibraryCondition OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Condition.
This value represents the overall condition of the tape
library."
::= { cpqDaTapeLibraryEntry 10 }
cpqDaTapeLibraryOverallCondition OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Overall Condition.
This value represents the overall condition of the tape library
and any associated tape drives."
::= { cpqDaTapeLibraryEntry 11 }
cpqDaTapeLibraryLastError OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Drive Array Tape Library Last Error.
This is the last error returned by the tape library."
::= { cpqDaTapeLibraryEntry 12 }
cpqDaTapeLibraryStatHours OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Stat Hours.
This is the number of hours of operation for the library."
::= { cpqDaTapeLibraryEntry 13 }
cpqDaTapeLibraryStatMoves OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Stat Moves.
This is the number of tape moves for the library loader arm."
::= { cpqDaTapeLibraryEntry 14 }
cpqDaTapeLibraryDriveList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..60))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Drive Array Tape Library Tape Drive List.
This is a data structure containing the list of tape drive ids
that are present in this library. The format is:
field octets contents
===== ====== ========
1 1 Tape controller slot index
2 2 Tape drive SCSI bus
3 3 Tape drive SCSI target
4 4 Tape drive SCSI logical unit number
These 4 octets are repeated for each drive in the library. For n
tape drives in a library, the string is 4 * n octets long."
::= { cpqDaTapeLibraryEntry 15 }
cpqDaTapeLibraryCurrentWidth OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
narrow(2),
wide16(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Current Width.
The following values are defined:
other(1)
The agent is unable to determine the current negotiated data
transfer width for this library.
narrow(2)
The negotiated data transfer width for this library is narrow
(8 data bits).
wide16(3)
The negotiated data transfer width for this library is wide
(16 data bits)."
::= { cpqDaTapeLibraryEntry 16 }
cpqDaTapeLibraryCurrentSpeed OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
asynchronous(2),
fast(3),
ultra(4),
ultra2(5),
ultra3(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Current Data Transfer Speed.
The following values are defined:
other(1)
The agent is unable to determine the current negotiated data
transfer speed for this library.
asynchronous(2)
The negotiated data transfer speed for this library is
asynchronous.
fast(3)
The negotiated data transfer speed for this library is 10
million transfers per second).
ultra(4)
The negotiated data transfer speed for this library is 20
million transfers per second.
ultra2(5)
The negotiated data transfer speed for this library is 40
million transfers per second.
ultra3(6)
The negotiated data transfer speed for this library is 80
million transfers per second."
::= { cpqDaTapeLibraryEntry 17 }
cpqDaTapeLibraryDriveList2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Tape Drive List 2.
This is a data structure containing the list of tape drive ids
that are present in this library. The format is:
field octets contents
===== ====== ========
1 1-4 Tape controller index
2 5 Tape drive SCSI bus
3 6 Tape drive SCSI target
4 7 Tape drive SCSI logical unit number
These 7 octets are repeated for each drive in the library. For n
tape drives in a library, the string is 7 * n octets long."
::= { cpqDaTapeLibraryEntry 18 }
cpqDaTapeLibraryProtocol OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
parallelScsi(2),
sata(3),
sas(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Protocol.
The following values are defined:
other(1)
The agent is unable to determine the protocol for this library.
parallelScsi(2)
The library protocol is parallel SCSI.
sata(3)
The library protocol is Serial ATA.
sas(4)
The library protocol is Serial Attached SCSI."
::= { cpqDaTapeLibraryEntry 19 }
cpqDaTapeLibraryNegotiatedLinkRate OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
rate-1-5(2),
rate-3-0(3),
rate-6-0(4),
rate-12-0(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive Array Tape Library Negotiated Link Rate.
The following values are defined:
other(1)
The agent is unable to determine the negotiated link rate
for this library.
rate-1-5(2)
The negotiated link rate for this library is 1.5 Gigabits per
second.
rate-3-0(3)
The negotiated link rate for this library is 3.0 Gigabits per
second.
rate-6-0(4)
The negotiated link rate for this library is 6.0 Gigabits per
second.
rate-12-0(5)
The negotiated link rate for this library is 12.0 Gigabits per
second."
::= { cpqDaTapeLibraryEntry 20 }
-- ****************************************************************************
-- Drive Array Trap Group
-- ======================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaTrap Group (1.3.6.1.4.1.232.3.3) (deprecated)
--
-- The trap group maintains information about the number of traps issued
-- from the driveArray enterprise. The trap group also maintains a
-- table of the last several traps issued. This table is intended to
-- give a management application some recent status information
-- immediately upon accessing the agent.
--
-- Implementation of the cpqDaTrap group is optional for agents that
-- support the Drive Array MIB.
--
-- ****************************************************************************
cpqDaTrapPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The total number of trap packets issued by the drive array
enterprise since the instrument agent was loaded."
::= { cpqDaTrap 1 }
cpqDaTrapLogMaxSize OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The maximum number of entries that will currently be kept in
the trap log. If the maximum size has been reached and a new
trap occurs the oldest trap will be removed."
::= { cpqDaTrap 2 }
-- ****************************************************************************
-- Drive Array Trap Log Group
-- ==========================
--
-- The compaq enterprise (1.3.6.1.4.1.232)
-- cpqDriveArray Group (1.3.6.1.4.1.232.3)
-- cpqDaTrap Group (1.3.6.1.4.1.232.3.3)
-- cpqDaTrapLogTable (1.3.6.1.4.1.232.3.3.3) (deprecated)
--
-- ****************************************************************************
cpqDaTrapLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpqDaTrapLogEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An ordered list of trap log entries (conceptually a queue).
The trap log entries will be kept in the order in which they
were generated with the most recent trap at index 1 and the
oldest trap entry at index trapLogMaxSize. If the maximum
number size has been reached and a new trap occurs the oldest
trap will be removed when the new trap is added so the
trapMaxLogSize is not exceeded."
::= { cpqDaTrap 3 }
cpqDaTrapLogEntry OBJECT-TYPE
SYNTAX CpqDaTrapLogEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A description of a trap event."
INDEX { cpqDaTrapLogIndex }
::= { cpqDaTrapLogTable 1 }
CpqDaTrapLogEntry ::= SEQUENCE {
cpqDaTrapLogIndex INTEGER,
cpqDaTrapType INTEGER,
cpqDaTrapTime OCTET STRING
}
cpqDaTrapLogIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"This value uniquely identifies this trapLogEntry at this time.
The most recent trap will have an index of 1 and the oldest
trap will have an index of trapLogMaxSize. Because of the
queue-like nature of the trapLog this particular trap
event's index will change as new traps are issued."
::= { cpqDaTrapLogEntry 1 }
cpqDaTrapType OBJECT-TYPE
SYNTAX INTEGER {
cpqDaLogDrvStatusChange(1),
cpqDaSpareStatusChange(2),
cpqDaPhyDrvStatusChange(3),
cpqDaPhyDrvThreshExceededTrap(4),
cpqDaAccelStatusChange(5),
cpqDaAccelBadDataTrap(6),
cpqDaAccelBatteryFailed(7),
cpqDa2LogDrvStatusChange(3001),
cpqDa2SpareStatusChange(3002),
cpqDa2PhyDrvStatusChange(3003),
cpqDa2PhyDrvThreshExceededTrap(3004),
cpqDa2AccelStatusChange(3005),
cpqDa2AccelBadDataTrap(3006),
cpqDa2AccelBatteryFailed(3007)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The type of the trap event that this entry describes.
This number refers to an entry in a list of traps enumerating
the possible traps the Drive Array agent may issue."
::= { cpqDaTrapLogEntry 2 }
cpqDaTrapTime OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The time of the trap event that this entry describes.
The time is given in year (first octet), month, day of month,
hour, minute, second (last octet) order. Each octet gives
the value in BCD."
::= { cpqDaTrapLogEntry 3 }
-- **************************************************************************
-- Drive Array Trap Definitions
-- ============================
--
-- Trap support in an Insight Agent implementation is optional. An Insight
-- Agent implementation may support all, some, or none of the traps.
--
-- **************************************************************************
cpqDaLogDrvStatusChange TRAP-TYPE
ENTERPRISE cpqDriveArray
VARIABLES { cpqDaLogDrvStatus }
DESCRIPTION
"Logical Drive Status Change.
This trap signifies that the agent has detected a change in the
status of a drive array logical drive. The variable
cpqDaLogDrvStatus indicates the current logical drive status."
--#TYPE "Logical Drive Status Change (1)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {0}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 1
cpqDaSpareStatusChange TRAP-TYPE
ENTERPRISE cpqDriveArray
VARIABLES { cpqDaSpareStatus, cpqDaSpareBusNumber }
DESCRIPTION
"Spare Drive Status Change.
This trap signifies that the agent has detected a change in the
status of a drive array spare drive. The variable
cpqDaSpareStatus indicates the current spare drive status. The
variable cpqDaSpareBusNumber indicates the SCSI bus number
associated with this drive."
--#TYPE "Spare Drive Status Change (2)"
--#SUMMARY "Status is now %d for a spare on bus %d."
--#ARGUMENTS {0,1}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 2
cpqDaPhyDrvStatusChange TRAP-TYPE
ENTERPRISE cpqDriveArray
VARIABLES { cpqDaPhyDrvStatus, cpqDaPhyDrvBusNumber }
DESCRIPTION
"Physical Drive Status Change.
This trap signifies that the agent has detected a change in the
status of a drive array physical drive. The variable
cpaDaPhyDrvStatus indicates the current physical drive status.
The variable cpqDaPhyDrvBusNumber indicates the SCSI bus number
associated with this drive."
--#TYPE "Physical Drive Status Change (3)"
--#SUMMARY "Status is now %d for a physical drive on bus %d."
--#ARGUMENTS {0,1}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3
cpqDaPhyDrvThreshPassedTrap TRAP-TYPE
ENTERPRISE cpqDriveArray
VARIABLES { cpqDaPhyDrvThreshPassed, cpqDaPhyDrvBusNumber }
DESCRIPTION
"Physical Drive Threshold Passed.
This trap signifies that the agent has detected a factory
threshold associated with one of the physical drive objects on
a drive array has been exceeded. The variable
cpqDaPhyDrvBusNumber indicates the SCSI bus number associated
with the drive."
--#TYPE "Physical Drive Threshold Passed (4)"
--#SUMMARY "Factory threshold passed for a physical on bus %d."
--#ARGUMENTS {1}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 4
cpqDaAccelStatusChange TRAP-TYPE
ENTERPRISE cpqDriveArray
VARIABLES { cpqDaAccelStatus }
DESCRIPTION
"Accelerator Board Status Change.
This trap signifies that the agent has detected a change in the
cpqDaAccelStatus of an array accelerator write cache. The
current status is represented by the variable cpqDaAccelStatus."
--#TYPE "Accelerator Board Status Change (5)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {0}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 5
cpqDaAccelBadDataTrap TRAP-TYPE
ENTERPRISE cpqDriveArray
VARIABLES { cpqDaAccelBadData }
DESCRIPTION
"Accelerator Board Bad Data.
This trap signifies that the agent has detected an array
accelerator cache board that has lost battery power. If data
was being stored in the accelerator memory when the server lost
power, that data has been lost."
--#TYPE "Accelerator Board Bad Data (6)"
--#SUMMARY "Accelerator lost battery power. Data Loss possible."
--#ARGUMENTS {}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 6
cpqDaAccelBatteryFailed TRAP-TYPE
ENTERPRISE cpqDriveArray
VARIABLES { cpqDaAccelBattery }
DESCRIPTION
"Accelerator Board Battery Failed.
This trap signifies that the agent has detected a battery
failure associated with the array accelerator cache board.
The current battery status is indicated by the
cpqDaAccelBattery variable."
--#TYPE "Accelerator Board Battery Failed (7)"
--#SUMMARY "Battery failed. Status (%d)."
--#ARGUMENTS {0}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 7
cpqDa2LogDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { cpqDaLogDrvStatus }
DESCRIPTION
"Logical Drive Status Change.
This trap signifies that the agent has detected a change in the
status of a drive array logical drive. The variable
cpqDaLogDrvStatus indicates the current logical drive status."
--#TYPE "Logical Drive Status Change (3001)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {0}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3001
cpqDa2SpareStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { cpqDaSpareStatus, cpqDaSpareBusNumber }
DESCRIPTION
"Spare Drive Status Change.
This trap signifies that the agent has detected a change in the
status of a drive array spare drive. The variable
cpqDaSpareStatus indicates the current spare drive status.
The variable cpqDaSpareBusNumber indicates the SCSI bus number
associated with this drive."
--#TYPE "Spare Drive Status Change (3002)"
--#SUMMARY "Spare Status is now %d on bus %d."
--#ARGUMENTS {0,1}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3002
cpqDa2PhyDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { cpqDaPhyDrvStatus, cpqDaPhyDrvBusNumber }
DESCRIPTION
"Physical Drive Status Change.
This trap signifies that the agent has detected a change in the
status of a drive array physical drive. The variable
cpaDaPhyDrvStatus indicates the current physical drive status.
The variable cpqDaPhyDrvBusNumber indicates the SCSI bus number
associated with this drive."
--#TYPE "Physical Drive Status Change (3003)"
--#SUMMARY "Status is now %d for a physical drive on bus %d."
--#ARGUMENTS {0,1}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3003
cpqDa2PhyDrvThreshPassedTrap TRAP-TYPE
ENTERPRISE compaq
VARIABLES { cpqDaPhyDrvThreshPassed, cpqDaPhyDrvBusNumber }
DESCRIPTION
"Physical Drive Threshold Passed.
This trap signifies that the agent has detected a factory
threshold associated with one of the physical drive objects on
a drive array has been exceeded. The variable
cpqDaPhyDrvBusNumber indicates the SCSI bus number associated
with the drive."
--#TYPE "Physical Drive Threshold Passed (3004)"
--#SUMMARY "Factory threshold passed for a physical on bus %d."
--#ARGUMENTS {1}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3004
cpqDa2AccelStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { cpqDaAccelStatus }
DESCRIPTION
"Accelerator Board Status Change.
This trap signifies that the Insight Agent has detected a
change in the cpqDaAccelStatus of array accelerator cache.
The current status is represented by the variable
cpqDaAccelStatus."
--#TYPE "Accelerator Board Status Change (3005)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {0}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3005
cpqDa2AccelBadDataTrap TRAP-TYPE
ENTERPRISE compaq
VARIABLES { cpqDaAccelBadData }
DESCRIPTION
"Accelerator Board Bad Data.
This trap signifies that the agent has detected an array
accelerator cache board that has lost battery power. If data
was being stored in the accelerator memory when the server lost
power, that data has been lost."
--#TYPE "Accelerator Board Bad Data (3006)"
--#SUMMARY "Accelerator lost battery power. Data Loss possible."
--#ARGUMENTS {}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3006
cpqDa2AccelBatteryFailed TRAP-TYPE
ENTERPRISE compaq
VARIABLES { cpqDaAccelBattery }
DESCRIPTION
"Accelerator Board Battery Failed.
This trap signifies that the agent has detected a battery
failure associated with the array accelerator cache board. The
current battery status is indicated by the cpqDaAccelBattery
variable."
--#TYPE "Accelerator Board Battery Failed (3007)"
--#SUMMARY "Battery status is %d."
--#ARGUMENTS {0}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3007
cpqDa3LogDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaLogDrvStatus }
DESCRIPTION
"Logical Drive Status Change.
This trap signifies that the agent has detected a change in the
status of a drive array logical drive. The variable
cpqDaLogDrvStatus indicates the current logical drive status."
--#TYPE "Logical Drive Status Change (3008)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3008
cpqDa3SpareStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaSpareStatus,
cpqDaSpareBusNumber }
DESCRIPTION
"Spare Drive Status Change.
This trap signifies that the agent has detected a change in the
status of a drive array spare drive. The variable
cpqDaSpareStatus indicates the current spare drive status. The
variable cpqDaSpareBusNumber indicates the SCSI bus number
associated with this drive."
--#TYPE "Spare Drive Status Change (3009)"
--#SUMMARY "Spare Status is now %d on bus %d."
--#ARGUMENTS {2,3}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3009
cpqDa3PhyDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaPhyDrvStatus,
cpqDaPhyDrvBusNumber }
DESCRIPTION
"Physical Drive Status Change.
This trap signifies that the agent has detected a change in the
status of a drive array physical drive. The variable
cpaDaPhyDrvStatus indicates the current physical drive status.
The variable cpqDaPhyDrvBusNumber indicates the SCSI bus number
associated with this drive."
--#TYPE "Physical Drive Status Change (3010)"
--#SUMMARY "Status is now %d for a physical drive on bus %d."
--#ARGUMENTS {2,3}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3010
cpqDa3PhyDrvThreshPassedTrap TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaPhyDrvThreshPassed,
cpqDaPhyDrvBusNumber }
DESCRIPTION
"Physical Drive Threshold Passed.
This trap signifies that the agent has detected a factory
threshold associated with one of the physical drive objects on
a drive array has been exceeded. The variable
cpqDaPhyDrvBusNumber indicates the SCSI bus number associated
with the drive."
--#TYPE "Physical Drive Threshold Passed (3011)"
--#SUMMARY "Factory threshold passed for a physical on bus %d."
--#ARGUMENTS {2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3011
cpqDa3AccelStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaAccelStatus }
DESCRIPTION
"Accelerator Board Status Change.
This trap signifies that the agent has detected a change in the
cpqDaAccelStatus of an array accelerator cache board. The
current status is represented by the variable cpqDaAccelStatus."
--#TYPE "Accelerator Board Status Change (3012)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3012
cpqDa3AccelBadDataTrap TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaAccelBadData }
DESCRIPTION
"Accelerator Board Bad Data.
This trap signifies that the agent has detected an array
accelerator cache board that has lost battery power. If data
was being stored in the accelerator memory when the server lost
power, that data has been lost."
--#TYPE "Accelerator Board Bad Data (3013)"
--#SUMMARY "Accelerator lost battery power. Data Loss possible."
--#ARGUMENTS {}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3013
cpqDa3AccelBatteryFailed TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaAccelBattery }
DESCRIPTION
"Accelerator Board Battery Failed.
This trap signifies that the agent has detected a battery
failure associated with the array accelerator cache board. The
current battery status is indicated by the cpqDaAccelBattery
variable."
--#TYPE "Accelerator Board Battery Failed (3014)"
--#SUMMARY "Battery status is %d."
--#ARGUMENTS {2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3014
cpqDaCntlrStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrSlot, cpqDaCntlrBoardStatus }
DESCRIPTION
"Controller Status Change.
This trap signifies that the agent has detected a change in the
status of a drive array controller. The variable
cpqDaCntlrBoardStatus indicates the current controller status.
User Action: If the board status is generalFailure(3), the
you may need to replace the controller. If the board status
is cableProblem(4), check the cable connections between the
controller and the storage system."
--#TYPE "Controller Status Change (3015)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {3}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3015
cpqDaCntlrActive TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrSlot, cpqDaCntlrPartnerSlot }
DESCRIPTION
"Controller Active.
This trap signifies that the agent has detected that a backup
array controller in a duplexed pair has switched over to the
active role. The variable cpqDaCntlrSlot indicates the
active controller slot and cpqDaCntlrPartnerSlot indicates the
backup.
User Action: Check the partner controller for problems.
If this was the result of a user initiated switch over,
no action is required."
--#TYPE "Duplex Controller Active (3016)"
--#SUMMARY "Controller in slot %d is now active."
--#ARGUMENTS {2}
--#SEVERITY INFORMATIONAL
--#TIMEINDEX 99
::= 3016
cpqDa4SpareStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaSpareStatus,
cpqDaSpareCntlrIndex, cpqDaSpareBusNumber,
cpqDaSpareBay }
DESCRIPTION
"Spare Drive Status Change.
This trap signifies that the agent has detected a change in the
status of a drive array spare drive. The variable
cpqDaSpareStatus indicates the current spare drive status.
User Action: If the spare drive status is failed, replace
the drive."
--#TYPE "Spare Drive Status Change (3017)"
--#SUMMARY "Spare Status is now %d."
--#ARGUMENTS {2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3017
cpqDa4PhyDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaPhyDrvStatus,
cpqDaPhyDrvCntlrIndex, cpqDaPhyDrvBusNumber,
cpqDaPhyDrvBay }
DESCRIPTION
"Physical Drive Status Change.
This trap signifies that the agent has detected a change in the
status of a drive array physical drive. The variable
cpaDaPhyDrvStatus indicates the current physical drive status.
User Action: If the physical drive failed or predicting
failure, replace the drive."
--#TYPE "Physical Drive Status Change (3018)"
--#SUMMARY "Physical Drive Status is now %d."
--#ARGUMENTS {2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3018
cpqDa4PhyDrvThreshPassedTrap TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaPhyDrvCntlrIndex,
cpqDaPhyDrvBusNumber, cpqDaPhyDrvBay}
DESCRIPTION
"Physical Drive Threshold Passed.
This trap signifies that the agent has detected a factory
threshold associated with one of the physical drive objects on
a drive array has been exceeded.
User Action: If the physical drive is predicting failure,
replace the drive."
--#TYPE "Physical Drive Threshold Passed (3019)"
--#SUMMARY "Factory threshold passed for a physical drive."
--#ARGUMENTS {}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3019
cpqDaTapeLibraryStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaTapeLibraryCntlrIndex,
cpqDaTapeLibraryScsiBus, cpqDaTapeLibraryScsiTarget,
cpqDaTapeLibraryScsiLun, cpqDaTapeLibraryStatus}
DESCRIPTION
"Tape Library Status Change.
This trap signifies that the agent has detected a change in
the status of a tape library. The variable
cpqDaTapeLibraryStatus indicates the current tape library
status. The variable cpqDaTapeLibraryScsiTarget indicates
the SCSI ID of the tape library.
User Action: If the tape library is failed, check the tape
library front panel."
--#TYPE "Tape Library Status Change (3020)"
--#SUMMARY "Status is now %d for the tape library."
--#ARGUMENTS {6}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3020
cpqDaTapeLibraryDoorStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaTapeLibraryCntlrIndex,
cpqDaTapeLibraryScsiBus, cpqDaTapeLibraryScsiTarget,
cpqDaTapeLibraryScsiLun, cpqDaTapeLibraryDoorStatus}
DESCRIPTION
"Tape Library Door Status Change.
This trap signifies that the agent has detected a change in
the door status of a tape library. The variable
cpqDaTapeLibraryDoorStatus indicates the current tape library
door status. The variable cpqDaTapeLibraryScsiTarget indicates
the the SCSI ID of the tape library.
User Action: If the tape library door is open, close the tape
library door."
--#TYPE "Tape Library Door Status Change (3021)"
--#SUMMARY "The door is %d for tape library."
--#ARGUMENTS {6}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3021
cpqDaTapeDriveStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaTapeDrvCntlrIndex,
cpqDaTapeDrvBusIndex, cpqDaTapeDrvScsiIdIndex,
cpqDaTapeDrvLunIndex, cpqDaTapeDrvStatus}
DESCRIPTION
"Tape Drive Status Change.
This trap signifies that the agent has detected a change in
the status of a tape drive. The variable cpqDaTapeDrvStatus
indicates the current tape status. The variable
cpqDaTapeDrvScsiIdIndex indicates the the SCSI ID of the tape
drive.
User Action: If the tape is failed, check the tape and
all SCSI connections."
--#TYPE "Tape Drive Status Change (3022)"
--#SUMMARY "Status is now %d for a tape drive."
--#ARGUMENTS {6}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3022
cpqDaTapeDriveCleaningRequired TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaTapeDrvCntlrIndex,
cpqDaTapeDrvBusIndex, cpqDaTapeDrvScsiIdIndex,
cpqDaTapeDrvLunIndex}
DESCRIPTION
"Tape Drive Cleaning Required trap.
The agent has detected a tape drive that needs to have a
cleaning tape inserted and run. This will cause the tape
drive heads to be cleaned."
--#TYPE "Tape Drive Cleaning Required (3023)"
--#SUMMARY "Cleaning is needed for the tape drive."
--#ARGUMENTS {}
--#SEVERITY MAJOR
--#TIMEINDEX 99
::= 3023
cpqDaTapeDriveCleanTapeReplace TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaTapeDrvCntlrIndex,
cpqDaTapeDrvBusIndex, cpqDaTapeDrvScsiIdIndex,
cpqDaTapeDrvLunIndex}
DESCRIPTION
"Tape Drive Cleaning Tape Needs Replacing.
The agent has detected that an autoloader tape unit has a
cleaning tape that has been fully used and therefore needs to
be replaced with a new cleaning tape."
--#TYPE "Tape Drive Cleaning Tape Needs Replacing (3024)"
--#SUMMARY "Cleaning tape needs replacing"
--#ARGUMENTS {}
--#SEVERITY MAJOR
--#TIMEINDEX 99
::= 3024
cpqDa5AccelStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrSlot,
cpqDaCntlrModel, cpqDaAccelSerialNumber,
cpqDaAccelTotalMemory, cpqDaAccelStatus,
cpqDaAccelErrCode }
DESCRIPTION
"Accelerator Board Status Change.
This trap signifies that the agent has detected a change in
the status of an array accelerator cache board. The current
status is represented by the variable cpqDaAccelStatus.
User Action: If the accelerator board status is permDisabled(5),
you may need to replace the accelerator board."
--#TYPE "Accelerator Board Status Change (3025)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {6}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3025
cpqDa5AccelBadDataTrap TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrSlot,
cpqDaCntlrModel, cpqDaAccelSerialNumber,
cpqDaAccelTotalMemory }
DESCRIPTION
"Accelerator Board Bad Data.
This trap signifies that the agent has detected an array
accelerator cache board that has lost battery power. If
data was being stored in the accelerator cache memory when the
server lost power, that data has been lost.
User Action: Verify that no data has been lost."
--#TYPE "Accelerator Board Bad Data (3026)"
--#SUMMARY "Accelerator lost battery power. Data Loss possible."
--#ARGUMENTS {}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3026
cpqDa5AccelBatteryFailed TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrSlot,
cpqDaCntlrModel, cpqDaAccelSerialNumber,
cpqDaAccelTotalMemory }
DESCRIPTION
"Accelerator Board Battery Failed.
This trap signifies that the agent has detected a battery
failure associated with the array accelerator cache board.
User Action: Replace the Accelerator Cache Board."
--#TYPE "Accelerator Board Battery Failed (3027)"
--#SUMMARY "Battery status is failed."
--#ARGUMENTS {}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3027
cpqDa5CntlrStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrSlot,
cpqDaCntlrBoardStatus, cpqDaCntlrModel,
cpqDaCntlrSerialNumber, cpqDaCntlrFWRev,
cpqDaAccelTotalMemory }
DESCRIPTION
"Controller Status Change.
This trap signifies that the agent has detected a change in
the status of a drive array controller. The variable
cpqDaCntlrBoardStatus indicates the current controller status.
User Action: If the board status is generalFailure(3), you
may need to replace the controller. If the board status is
cableProblem(4), check the cable connections between the
controller and the storage system."
--#TYPE "Controller Status Change (3028)"
--#SUMMARY "Status is now %d."
--#ARGUMENTS {3}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3028
cpqDa5PhyDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaPhyDrvStatus,
cpqDaPhyDrvCntlrIndex, cpqDaPhyDrvBusNumber,
cpqDaPhyDrvBay, cpqDaPhyDrvModel, cpqDaPhyDrvFWRev,
cpqDaPhyDrvSerialNum, cpqDaPhyDrvFailureCode }
DESCRIPTION
"Physical Drive Status Change.
This trap signifies that the agent has detected a change in the
status of a drive array physical drive. The variable
cpaDaPhyDrvStatus indicates the current physical drive status.
User Action: If the physical drive status is failed(3) or
predictiveFailure(4), replace the drive."
--#TYPE "Physical Drive Status Change (3029)"
--#SUMMARY "Physical Drive Status is now %d."
--#ARGUMENTS {2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3029
cpqDa5PhyDrvThreshPassedTrap TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaPhyDrvCntlrIndex,
cpqDaPhyDrvBusNumber, cpqDaPhyDrvBay, cpqDaPhyDrvModel,
cpqDaPhyDrvFWRev, cpqDaPhyDrvSerialNum }
DESCRIPTION
"Physical Drive Threshold Passed.
This trap signifies that the agent has detected a factory
threshold associated with one of the physical drive objects
on a drive array has been exceeded.
User Action: Replace the physical drive."
--#TYPE "Physical Drive Threshold Passed (3030)"
--#SUMMARY "Factory threshold passed for a physical drive."
--#ARGUMENTS {}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3030
cpqDa2TapeLibraryStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaTapeLibraryCntlrIndex,
cpqDaTapeLibraryScsiBus, cpqDaTapeLibraryScsiTarget,
cpqDaTapeLibraryScsiLun, cpqDaTapeLibraryModel,
cpqDaTapeLibraryFWRev, cpqDaTapeLibrarySerialNumber,
cpqDaTapeLibraryStatus}
DESCRIPTION
"Tape Library Status Change.
This trap signifies that the agent has detected a change in
the status of a tape library. The variable
cpqDaTapeLibraryStatus indicates the current tape library
status. The variable cpqDaTapeLibraryScsiTarget indicates
the SCSI ID of the tape library.
User Action: If the tape library is failed, check the tape
library front panel."
--#TYPE "Tape Library Status Change (3031)"
--#SUMMARY "Status is now %d for the tape library."
--#ARGUMENTS {9}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3031
cpqDa2TapeDriveStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaTapeDrvCntlrIndex,
cpqDaTapeDrvBusIndex, cpqDaTapeDrvScsiIdIndex,
cpqDaTapeDrvLunIndex, cpqDaTapeDrvName,
cpqDaTapeDrvFwRev, cpqDaTapeDrvSerialNumber,
cpqDaTapeDrvStatus}
DESCRIPTION
"Tape Drive Status Change.
This trap signifies that the agent has detected a change in
the status of a tape drive. The variable cpqDaTapeDrvStatus
indicates the current tape status. The variable
cpqDaTapeDrvScsiIdIndex indicates the the SCSI ID of the tape
drive.
User Action: If the tape is failed, check the tape and
all SCSI connections."
--#TYPE "Tape Drive Status Change (3032)"
--#SUMMARY "Status is now %d for a tape drive."
--#ARGUMENTS {9}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3032
cpqDa6CntlrStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrHwLocation,
cpqDaCntlrIndex, cpqDaCntlrBoardStatus, cpqDaCntlrModel,
cpqDaCntlrSerialNumber, cpqDaCntlrFWRev,
cpqDaAccelTotalMemory }
DESCRIPTION
"Controller Status Change.
This trap signifies that the agent has detected a change in
the status of a drive array controller. The variable
cpqDaCntlrBoardStatus indicates the current controller status.
User Action: If cpqDaCntlrBoardStatus is 'generalFailure(3)', you
may need to reboot the server or replace the controller.
After the system is rebooted, check the variable
cpqDaCntlrLastLockupCode for the controller<65>s last lockup code.
If cpqDaCntlrBoardStatus is 'cableProblem(4)', check the cable
connections between the controller and the storage system. If
cpqDaCntlrBoardStatus is 'cacheModuleMissing(6)', the array
controller is operating in an unsupported configuration and
requires that a cache module be attached to the controller."
--#TYPE "Controller Status Change (3033)"
--#SUMMARY "Controller status is now %d for controller located in %s."
--#ARGUMENTS {4, 2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "If the controller status is 'generalFailure(3)', you may need to reboot the server or replace the controller."
::= 3033
cpqDa6LogDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrHwLocation,
cpqDaLogDrvCntlrIndex, cpqDaLogDrvIndex,
cpqDaLogDrvStatus }
DESCRIPTION
"Logical Drive Status Change.
This trap signifies that the agent has detected a change in the
status of a drive array logical drive. The variable
cpqDaLogDrvStatus indicates the current logical drive status."
--#TYPE "Logical Drive Status Change (3034)"
--#SUMMARY "Logical drive status is now %d for drive %d on controller located in %s."
--#ARGUMENTS {5, 4, 2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "If the logical drive status is 'recovering(5)', at least one drive has failed but no data has been lost. If the logical drive status is 'failed(3)', data loss has occurred. Replace the failed physical drive(s)."
::= 3034
cpqDa6SpareStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrHwLocation,
cpqDaSpareCntlrIndex, cpqDaSparePhyDrvIndex,
cpqDaSpareStatus, cpqDaSpareBusNumber, cpqDaSpareBay }
DESCRIPTION
"Spare Drive Status Change.
This trap signifies that the agent has detected a change in the
status of a drive array spare drive. The variable
cpqDaSpareStatus indicates the current spare drive status.
User Action: If the spare drive status is failed, replace
the drive."
--#TYPE "Spare Drive Status Change (3035)"
--#SUMMARY "Spare Status is now %d."
--#ARGUMENTS {5}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3035
cpqDa6PhyDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrHwLocation,
cpqDaPhyDrvCntlrIndex, cpqDaPhyDrvIndex,
cpqDaPhyDrvBusNumber, cpqDaPhyDrvBay, cpqDaPhyDrvModel,
cpqDaPhyDrvFWRev, cpqDaPhyDrvSerialNum,
cpqDaPhyDrvFailureCode, cpqDaPhyDrvStatus }
DESCRIPTION
"Physical Drive Status Change.
This trap signifies that the agent has detected a change in the
status of a drive array physical drive. The variable
cpaDaPhyDrvStatus indicates the current physical drive status.
User Action: If the physical drive status is failed(3) or
predictiveFailure(4), replace the drive."
--#TYPE "Physical Drive Status Change (3036)"
--#SUMMARY "Physical Drive Status is now %d."
--#ARGUMENTS {11}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
::= 3036
cpqDa6PhyDrvThreshPassedTrap TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrHwLocation,
cpqDaPhyDrvCntlrIndex, cpqDaPhyDrvIndex,
cpqDaPhyDrvBusNumber, cpqDaPhyDrvBay, cpqDaPhyDrvModel,
cpqDaPhyDrvFWRev, cpqDaPhyDrvSerialNum }
DESCRIPTION
"Physical Drive Threshold Passed.
This trap signifies that the agent has detected a factory
threshold associated with one of the physical drive objects
on a drive array has been exceeded.
User Action: Replace the physical drive."
--#TYPE "Physical Drive Threshold Passed (3037)"
--#SUMMARY "Factory threshold passed for a physical drive (Bay: %d, Bus: %d, Controller: %s)."
--#ARGUMENTS {6, 5, 2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "Replace the physical drive."
::= 3037
cpqDa6AccelStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrHwLocation,
cpqDaCntlrModel, cpqDaAccelCntlrIndex,
cpqDaAccelSerialNumber, cpqDaAccelTotalMemory,
cpqDaAccelStatus, cpqDaAccelErrCode }
DESCRIPTION
"Cache Module Board Status Change.
This trap signifies that the agent has detected a change in
the status of a cache module board. The current
status is represented by the variable cpqDaAccelStatus.
User Action: If cpqDaAccelStatus is 'permDisabled(5)', you may
need to replace the cache module board. If cpqDaAccelStatus is
'cacheModFlashMemNotAttached(6)', install the flash memory."
--#TYPE "Accelerator Board Status Change (3038)"
--#SUMMARY "Cache module board status is now %d for board located in %s."
--#ARGUMENTS {7, 2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "If the board status is 'permDisabled(5)' you may need to replace the cache module board. If the board status is 'cacheModFlashMemNotAttached(6)', install the flash memory."
::= 3038
cpqDa6AccelBadDataTrap TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrHwLocation,
cpqDaCntlrModel, cpqDaAccelCntlrIndex,
cpqDaAccelSerialNumber, cpqDaAccelTotalMemory }
DESCRIPTION
"Cache Module Board Bad Data.
This trap signifies that the agent has detected a cache
module board that has lost backup power. If
data was being stored in the cache module memory when the
server lost power, that data has been lost. The backup power
source is indicated by cpqDaAccelBackupPowerSource.
User Action: Verify that no data has been lost."
--#TYPE "Accelerator Board Bad Data (3039)"
--#SUMMARY "Cache module board lost backup power: data loss possible (Controller Location: %s)."
--#ARGUMENTS {2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "Verify that no data has been lost."
::= 3039
cpqDa6AccelBatteryFailed TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrHwLocation,
cpqDaCntlrModel, cpqDaAccelCntlrIndex,
cpqDaAccelSerialNumber, cpqDaAccelTotalMemory }
DESCRIPTION
"Cache Module Board Backup Power Source Failed.
This trap signifies that the agent has detected a backup
power source failure associated with the cache module
board. The backup power source is indicated by
cpqDaAccelBackupPowerSource.
User Action: Replace the Backup Power Source."
--#TYPE "Accelerator Board Battery Failed (3040)"
--#SUMMARY "Cache module board backup power source status is failed for controller located in %s."
--#ARGUMENTS {2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "Replace the backup power source."
::= 3040
cpqDa6TapeLibraryStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrHwLocation,
cpqDaTapeLibraryCntlrIndex, cpqDaTapeLibraryScsiBus,
cpqDaTapeLibraryScsiTarget, cpqDaTapeLibraryScsiLun,
cpqDaTapeLibraryModel, cpqDaTapeLibraryFWRev,
cpqDaTapeLibrarySerialNumber, cpqDaTapeLibraryStatus }
DESCRIPTION
"Tape Library Status Change.
This trap signifies that the agent has detected a change in
the status of a tape library. The variable
cpqDaTapeLibraryStatus indicates the current tape library
status. The variable cpqDaTapeLibraryScsiTarget indicates
the SCSI ID of the tape library.
User Action: If cpqDaTapeLibraryStatus is 'failed(4)', check the
tape library front panel."
--#TYPE "Tape Library Status Change (3041)"
--#SUMMARY "Tape library status is now %d (SCSI ID: %d, Bus: %d, Controller: %s)."
--#ARGUMENTS {10, 5, 4, 2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "If the tape library status is 'failed(4)', check the tape library front panel."
::= 3041
cpqDa6TapeLibraryDoorStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrHwLocation,
cpqDaTapeLibraryCntlrIndex, cpqDaTapeLibraryScsiBus,
cpqDaTapeLibraryScsiTarget, cpqDaTapeLibraryScsiLun,
cpqDaTapeLibraryModel, cpqDaTapeLibraryFWRev,
cpqDaTapeLibrarySerialNumber,
cpqDaTapeLibraryDoorStatus }
DESCRIPTION
"Tape Library Door Status Change.
This trap signifies that the agent has detected a change in
the door status of a tape library. The variable
cpqDaTapeLibraryDoorStatus indicates the current tape library
door status. The variable cpqDaTapeLibraryScsiTarget indicates
the the SCSI ID of the tape library.
User Action: If cpqDaTapeLibraryDoorStatus is 'open(4)', close the
tape library door."
--#TYPE "Tape Library Door Status Change (3042)"
--#SUMMARY "Tape library door status is now %d (SCSI ID: %d, Bus: %d, Controller: %s)."
--#ARGUMENTS {10, 5, 4, 2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "If the tape library door status is 'open(4)', close the door."
::= 3042
cpqDa6TapeDriveStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrHwLocation,
cpqDaTapeDrvCntlrIndex, cpqDaTapeDrvBusIndex,
cpqDaTapeDrvScsiIdIndex, cpqDaTapeDrvLunIndex,
cpqDaTapeDrvName, cpqDaTapeDrvFwRev,
cpqDaTapeDrvSerialNumber, cpqDaTapeDrvStatus }
DESCRIPTION
"Tape Drive Status Change.
This trap signifies that the agent has detected a change in
the status of a tape drive. The variable cpqDaTapeDrvStatus
indicates the current tape status. The variable
cpqDaTapeDrvScsiIdIndex indicates the the SCSI ID of the tape
drive.
User Action: If cpqDaTapeDrvStatus is 'failed(4)', check the tape
and all SCSI connections."
--#TYPE "Tape Drive Status Change (3043)"
--#SUMMARY "Tape drive status is now %d (Drive: %d, Bus: %d, Controller: %s)."
--#ARGUMENTS {10, 5, 4, 2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "If the tape drive status is 'failed(4)', check the tape and all SCSI connections."
::= 3043
cpqDa6TapeDriveCleaningRequired TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrHwLocation,
cpqDaTapeDrvCntlrIndex, cpqDaTapeDrvBusIndex,
cpqDaTapeDrvScsiIdIndex, cpqDaTapeDrvLunIndex,
cpqDaTapeDrvName, cpqDaTapeDrvFwRev,
cpqDaTapeDrvSerialNumber }
DESCRIPTION
"Tape Drive Cleaning Required trap.
The agent has detected a tape drive that needs to have a
cleaning tape inserted and run. This will cause the tape
drive heads to be cleaned."
--#TYPE "Tape Drive Cleaning Required (3044)"
--#SUMMARY "Cleaning is needed for the tape drive (Drive: %d, Bus: %d, Controller: %s)."
--#ARGUMENTS {5, 4, 2}
--#SEVERITY MAJOR
--#TIMEINDEX 99
--#SIMPLE_SEVERITY MAJOR
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "Insert and run a cleaning tape in the tape drive."
::= 3044
cpqDa6TapeDriveCleanTapeReplace TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrHwLocation,
cpqDaTapeDrvCntlrIndex, cpqDaTapeDrvBusIndex,
cpqDaTapeDrvScsiIdIndex, cpqDaTapeDrvLunIndex,
cpqDaTapeDrvName, cpqDaTapeDrvFwRev,
cpqDaTapeDrvSerialNumber }
DESCRIPTION
"Tape Drive Cleaning Tape Needs Replacing.
The agent has detected that an autoloader tape unit has a
cleaning tape that has been fully used and therefore needs to
be replaced with a new cleaning tape."
--#TYPE "Tape Drive Cleaning Tape Needs Replacing (3045)"
--#SUMMARY "Cleaning tape needs replacing (Drive: %d, Bus: %d, Controller: %s)."
--#ARGUMENTS {5, 4, 2}
--#SEVERITY MAJOR
--#TIMEINDEX 99
--#SIMPLE_SEVERITY MAJOR
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "Replace the cleaning tape."
::= 3045
cpqDa7PhyDrvStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrHwLocation,
cpqDaPhyDrvCntlrIndex, cpqDaPhyDrvIndex,
cpqDaPhyDrvLocationString, cpqDaPhyDrvType,
cpqDaPhyDrvModel, cpqDaPhyDrvFWRev, cpqDaPhyDrvSerialNum,
cpqDaPhyDrvFailureCode, cpqDaPhyDrvStatus,
cpqDaPhyDrvBusNumber }
DESCRIPTION
"Physical Drive Status Change.
This trap signifies that the agent has detected a change in the
status of a drive array physical drive. The variable
cpaDaPhyDrvStatus indicates the current physical drive status.
User Action: If cpaDaPhyDrvStatus is 'failed(3)',
'predictiveFailure(4)', 'ssdWearOut(8)', or 'notAuthenticated(9)',
replace the drive."
--#TYPE "Physical Drive Status Change (3046)"
--#SUMMARY "Physical drive status is now %d for drive at location %s connected to controller in %s."
--#ARGUMENTS {11, 5, 2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "If the physical drive status is 'failed(3)', 'predictiveFailure(4)', 'ssdWearOut(8)', or 'notAuthenticated(9)', replace the drive."
::= 3046
cpqDa7SpareStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrHwLocation,
cpqDaSpareCntlrIndex, cpqDaSparePhyDrvIndex,
cpqDaSpareStatus, cpqDaSpareLocationString,
cpqDaSpareBusNumber }
DESCRIPTION
"Spare Drive Status Change.
This trap signifies that the agent has detected a change in the
status of a drive array spare drive. The variable
cpqDaSpareStatus indicates the current spare drive status.
User Action: If cpqDaSpareStatus is 'failed(3)', replace the
drive."
--#TYPE "Spare Drive Status Change (3047)"
--#SUMMARY "Spare status is now %d for drive at location %s connected to controller in %s."
--#ARGUMENTS {5, 6, 2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "If the spare drive status is 'failed(3)', replace the drive."
::= 3047
cpqDaCntlrPartnerStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrHwLocation,
cpqDaCntlrIndex, cpqDaCntlrModel,
cpqDaCntlrSerialNumber, cpqDaCntlrPartnerSerialNumber,
cpqDaCntlrPartnerBoardStatus}
DESCRIPTION
"Partner Controller Status Change.
This trap signifies that the agent has detected a change in
the status of a drive array partner controller. The variable
cpqDaCntlrPartnerBoardStatus indicates the current partner
controller status. The variable cpqDaCntlrSerialNumber indicates
the controller<65>s serial number and cpqDaCntlrPartnerSerialNumber
indicates the partner controller<65>s serial number.
User Action: Check the partner controller for problems. If lost
communication with the partner controller is the result of a user
initiated action, no remedial action is required."
--#TYPE "Partner Controller Status Change (3048)"
--#SUMMARY "Partner controller status is now %d for controller located in %s."
--#ARGUMENTS {7, 2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "Check the partner controller for problems. If communication with the partner controller was lost as the result of a user initiated action, then no remedial action is required."
::= 3048
cpqDaPhyDrvSSDWearStatusChange TRAP-TYPE
ENTERPRISE compaq
VARIABLES { sysName, cpqHoTrapFlags, cpqDaCntlrHwLocation,
cpqDaPhyDrvCntlrIndex, cpqDaPhyDrvIndex,
cpqDaPhyDrvLocationString, cpqDaPhyDrvType,
cpqDaPhyDrvModel, cpqDaPhyDrvFWRev, cpqDaPhyDrvSerialNum,
cpqDaPhyDrvSSDWearStatus}
DESCRIPTION
"Solid State Disk Wear Status Change.
This trap signifies that the agent has detected a change in the
SSD wear status of a drive array physical drive. The variable
cpqDaPhyDrvSSDWearStatus indicates the current SSD wear status.
User Action: If cpqDaPhyDrvSSDWearStatus is 'ssdWearOut(6)', replace
the drive."
--#TYPE "Solid State Disk Wear Status Change (3049)"
--#SUMMARY "Solid state disk wear status is now %d for drive at location %s connected to controller in %s."
--#ARGUMENTS {10, 5, 2}
--#SEVERITY CRITICAL
--#TIMEINDEX 99
--#VARBINDSEVERITY 2
--#SIMPLE_SEVERITY CRITICAL
--#HWSTATUS_CATEGORY STORAGE
--#ACTION "If the SSD wear status is 'ssdWearOut(6)', replace the drive."
::= 3049
END
Reference in New Issue View Git Blame Copy Permalink