681 lines
28 KiB
Plaintext
681 lines
28 KiB
Plaintext
HP-ICF-PIM DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, IpAddress,
|
|
Integer32, Unsigned32, TimeTicks
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
TruthValue, RowStatus
|
|
FROM SNMPv2-TC
|
|
pimCandidateRPEntry, pimInterfaceEntry, pimComponentEntry,
|
|
pimRPSetComponent
|
|
FROM PIM-MIB
|
|
hpSwitch
|
|
FROM HP-ICF-OID;
|
|
|
|
hpicfPimMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200508041619Z" -- August 4, 2005
|
|
ORGANIZATION "Hewlett-Packard Company
|
|
ProCurve Networking Business"
|
|
CONTACT-INFO "Hewlett-Packard Company
|
|
8000 Foothills Blvd.
|
|
Roseville, CA 95747"
|
|
DESCRIPTION "This MIB module contains HP proprietary
|
|
extensions to the standard PIM MIB (RFC 2934)."
|
|
|
|
REVISION "200508041619Z" -- August 4, 2005
|
|
DESCRIPTION "Added PIM-SM objects."
|
|
|
|
REVISION "200406300000Z" -- June 30, 2004
|
|
DESCRIPTION "Initial revision."
|
|
::= { hpSwitch 20 }
|
|
|
|
-- **********************************************************************
|
|
-- The PIM MIB Groups
|
|
-- **********************************************************************
|
|
|
|
hpicfPimObjects OBJECT IDENTIFIER ::= { hpicfPimMIB 1 }
|
|
hpicfPimTraps OBJECT IDENTIFIER ::= { hpicfPimObjects 0 }
|
|
hpicfPim OBJECT IDENTIFIER ::= { hpicfPimObjects 1 }
|
|
|
|
hpicfPimConformance OBJECT IDENTIFIER ::= { hpicfPimMIB 2 }
|
|
hpicfPimGroups OBJECT IDENTIFIER ::= { hpicfPimConformance 1 }
|
|
hpicfPimCompliances OBJECT IDENTIFIER ::= { hpicfPimConformance 2 }
|
|
|
|
-- **********************************************************************
|
|
-- Start of MIB objects
|
|
-- **********************************************************************
|
|
|
|
hpicfPimAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The operational status of the PIM routing protocol
|
|
on this router. Default is disabled."
|
|
DEFVAL { disable }
|
|
::= { hpicfPim 1 }
|
|
|
|
hpicfPimStateRefreshInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (10..300)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The interval between successive State Refresh
|
|
messages originated by this router.
|
|
Default is 60 seconds."
|
|
DEFVAL { 60 }
|
|
::= { hpicfPim 2 }
|
|
|
|
hpicfPimSPTThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Specifies a threshold for switching to the Shortest
|
|
Path Tree (SPT) on this router. If the object has
|
|
the special value of -1, the Shared Tree rooted to the
|
|
Rendezvous Point (RP) will be used indefinitely on the
|
|
router. Default is -1."
|
|
DEFVAL { -1 }
|
|
::= { hpicfPim 3 }
|
|
|
|
hpicfPimTrapControl OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
neighborLoss(0),
|
|
hardMrtFull(1),
|
|
softMrtFull(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates whether the PIM-enabled router will generate
|
|
SNMP traps for PIM events. The set bit means 'enabled'.
|
|
|
|
- neighborLoss(0)
|
|
This bit controls whether the notification trap is
|
|
allowed to be send when the neighbour timer expires
|
|
and the router has no other neighbours on the same
|
|
interface with a lower IP address than itself.
|
|
|
|
- hardMrtFull(1)
|
|
This bit controls whether the notification trap is
|
|
allowed to be send when the MRT table is full and
|
|
the error has been originated by hardware.
|
|
|
|
- softMrtFull(2)
|
|
This bit controls whether the notification trap is
|
|
allowed to be send when the MRT table is full and
|
|
the error has been originated by software."
|
|
::= { hpicfPim 4 }
|
|
|
|
-- **********************************************************************
|
|
-- The PIM Static RP-Set Table
|
|
-- **********************************************************************
|
|
|
|
hpicfPimStaticRPSetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpicfPimStaticRPSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The (conceptual) table containing statically
|
|
configured Rendezvous Points (RPs) for IP multicast
|
|
group mappings. This information is being used
|
|
in the PIM Sparse mode only."
|
|
::= { hpicfPim 5 }
|
|
|
|
hpicfPimStaticRPSetEntry OBJECT-TYPE
|
|
SYNTAX HpicfPimStaticRPSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry (row) in the hpicfPimStaticRPSetTable.
|
|
NOTE: the pimRPSetComponent is an index that uniquely
|
|
identifies the component. Each protocol instance
|
|
connected to a separate domain should have a different
|
|
index value."
|
|
INDEX { pimRPSetComponent,
|
|
hpicfPimStaticRPSetGroupAddress,
|
|
hpicfPimStaticRPSetGroupMask,
|
|
hpicfPimStaticRPSetAddress }
|
|
::= { hpicfPimStaticRPSetTable 1 }
|
|
|
|
HpicfPimStaticRPSetEntry ::=
|
|
SEQUENCE {
|
|
hpicfPimStaticRPSetGroupAddress IpAddress,
|
|
hpicfPimStaticRPSetGroupMask IpAddress,
|
|
hpicfPimStaticRPSetAddress IpAddress,
|
|
hpicfPimStaticRPSetOverride TruthValue,
|
|
hpicfPimStaticRPSetRowStatus RowStatus
|
|
}
|
|
|
|
hpicfPimStaticRPSetGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The IP multicast group address which, when combined
|
|
with hpicfPimStaticRPSetGroupMask, gives the group
|
|
prefix for which this entry contains information
|
|
about the statically configured RP."
|
|
::= { hpicfPimStaticRPSetEntry 1 }
|
|
|
|
hpicfPimStaticRPSetGroupMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The multicast group address mask which, when combined
|
|
with hpicfPimStaticRPSetGroupAddress, gives the group
|
|
prefix for which this entry contains information about
|
|
the statically configured RP."
|
|
::= { hpicfPimStaticRPSetEntry 2 }
|
|
|
|
hpicfPimStaticRPSetAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The IP address of statically configured RP for the
|
|
given IP multicast group(s)."
|
|
::= { hpicfPimStaticRPSetEntry 3 }
|
|
|
|
hpicfPimStaticRPSetOverride OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "If true, indicates that the router should ignore the
|
|
information learned by a BSR if there is a conflict
|
|
between the information this static entry contains and
|
|
the information that is learned by the BSR.
|
|
Default is false."
|
|
DEFVAL { false }
|
|
::= { hpicfPimStaticRPSetEntry 4 }
|
|
|
|
hpicfPimStaticRPSetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The status of this row, by which new entries may be
|
|
created, or old entries deleted from this table."
|
|
::= { hpicfPimStaticRPSetEntry 5 }
|
|
|
|
-- **********************************************************************
|
|
-- The Extensions to the PIM Interface Table (RFC 2934)
|
|
-- **********************************************************************
|
|
|
|
hpicfPimIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpicfPimIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "HP extensions to the pimInterfaceTable."
|
|
::= { hpicfPim 6 }
|
|
|
|
hpicfPimIfEntry OBJECT-TYPE
|
|
SYNTAX HpicfPimIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "HP extensions for an entry in the pimInterfaceTable."
|
|
AUGMENTS { pimInterfaceEntry }
|
|
::= { hpicfPimIfTable 1 }
|
|
|
|
HpicfPimIfEntry ::=
|
|
SEQUENCE {
|
|
hpicfPimIfAddress IpAddress,
|
|
hpicfPimIfTrigHelloInterval Integer32,
|
|
hpicfPimIfHelloHoldtime Integer32,
|
|
hpicfPimIfLanPruneDelay TruthValue,
|
|
hpicfPimIfPropagationDelay Integer32,
|
|
hpicfPimIfOverrideInterval Integer32,
|
|
hpicfPimIfGenerationID TruthValue,
|
|
hpicfPimIfJoinPruneHoldtime Unsigned32,
|
|
hpicfPimIfGraftRetryInterval Integer32,
|
|
hpicfPimIfMaxGraftRetries Integer32,
|
|
hpicfPimIfSRTTLThreshold Unsigned32,
|
|
hpicfPimIfLanDelayEnabled TruthValue,
|
|
hpicfPimIfSRCapable TruthValue,
|
|
hpicfPimIfDRPriority Unsigned32,
|
|
hpicfPimIfNBRTimeout Integer32
|
|
}
|
|
|
|
hpicfPimIfAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This is copy of pimInterfaceAddress with read-create
|
|
access. PIM uses this source address to send its
|
|
protocol packets out on this interface. This address can
|
|
be set to one of IP addresses of the interface or
|
|
255.255.255.255 if the address is determined dynamically
|
|
based on the current IP configuration.
|
|
The currently used source address is value of
|
|
pimInterfaceAddress in the latter case."
|
|
::= { hpicfPimIfEntry 1 }
|
|
|
|
hpicfPimIfTrigHelloInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (0..5)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The maximum time before a triggered PIM Hello message
|
|
is transmitted on this interface. Default is 5 seconds."
|
|
DEFVAL { 5 }
|
|
::= { hpicfPimIfEntry 2 }
|
|
|
|
hpicfPimIfHelloHoldtime OBJECT-TYPE
|
|
SYNTAX Integer32 (17..1050)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The value set in the Holdtime field of Hello messages
|
|
transmitted on this interface. This should be 3.5
|
|
times the value of pimInterfaceHelloInterval.
|
|
Default is 105 seconds."
|
|
DEFVAL { 105 }
|
|
::= { hpicfPimIfEntry 3 }
|
|
|
|
hpicfPimIfLanPruneDelay OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Turns the LAN Prune Delay Option off and on on this
|
|
interface. Default is true."
|
|
DEFVAL { true }
|
|
::= { hpicfPimIfEntry 4 }
|
|
|
|
hpicfPimIfPropagationDelay OBJECT-TYPE
|
|
SYNTAX Integer32 (250..2000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The value inserted into the LAN Prune Delay field of a
|
|
LAN Prune Delay option on this interface.
|
|
Default is 500 milliseconds."
|
|
DEFVAL { 500 }
|
|
::= { hpicfPimIfEntry 5 }
|
|
|
|
hpicfPimIfOverrideInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (500..6000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The value inserted into the Override Interval field of
|
|
a LAN Prune Delay option on this interface.
|
|
Default is 2500 milliseconds."
|
|
DEFVAL { 2500 }
|
|
::= { hpicfPimIfEntry 6 }
|
|
|
|
hpicfPimIfGenerationID OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Turns the Generation ID Option off and on on this
|
|
interface. Default is false."
|
|
DEFVAL { false }
|
|
::= { hpicfPimIfEntry 7 }
|
|
|
|
hpicfPimIfJoinPruneHoldtime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The value inserted into the Holdtime field of a Join/
|
|
Prune message sent on this interface. The value should
|
|
be 3.5 times pimInterfaceJoinPruneInterval.
|
|
Default is 210 seconds."
|
|
DEFVAL { 210 }
|
|
::= { hpicfPimIfEntry 8 }
|
|
|
|
hpicfPimIfGraftRetryInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The interval a PIM router waits for a Graft Ack before
|
|
re-sending a Graft on this interface.
|
|
Default is 3 seconds."
|
|
DEFVAL { 3 }
|
|
::= { hpicfPimIfEntry 9 }
|
|
|
|
hpicfPimIfMaxGraftRetries OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The maximum number of times this router will re-send a
|
|
Graft on this interface. Default is 2."
|
|
DEFVAL { 2 }
|
|
::= { hpicfPimIfEntry 10 }
|
|
|
|
hpicfPimIfSRTTLThreshold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The Time To Live in a PIM-DM State Refresh message at
|
|
which it is not forwarded on this interface. Default is 0."
|
|
DEFVAL { 0 }
|
|
::= { hpicfPimIfEntry 11 }
|
|
|
|
hpicfPimIfLanDelayEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Evaluates to TRUE if all routers on this interface are
|
|
using the LAN Prune Delay Option."
|
|
::= { hpicfPimIfEntry 12 }
|
|
|
|
hpicfPimIfSRCapable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Evaluates to TRUE if all routers on this interface are
|
|
using the State Refresh Capable Option."
|
|
::= { hpicfPimIfEntry 13 }
|
|
|
|
hpicfPimIfDRPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The Designated Router Priority inserted into the DR
|
|
priority option on this interface. Default is 1."
|
|
DEFVAL { 1 }
|
|
::= { hpicfPimIfEntry 14 }
|
|
|
|
hpicfPimIfNBRTimeout OBJECT-TYPE
|
|
SYNTAX Integer32 (60..8000)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Time interval after which the router will consider a
|
|
neighbour to not be present, if no PIM Hello messages
|
|
arrived on the interface. Default is 180 seconds."
|
|
DEFVAL { 180 }
|
|
::= { hpicfPimIfEntry 15 }
|
|
|
|
-- **********************************************************************
|
|
-- The Extensions to the PIM Component Table (RFC 2934)
|
|
-- **********************************************************************
|
|
|
|
hpicfPimComponentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpicfPimComponentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "HP extensions to the pimComponentTable - the
|
|
(conceptual) table containing objects specific to a
|
|
PIM domain. One row exists for each domain to which
|
|
the router is connected. Typically, a PIM-SM router
|
|
will be a member of exactly one domain, however, the
|
|
table also supports routers which may form a border
|
|
between two PIM-SM domains and do not forward Bootstrap
|
|
messages between them."
|
|
::= { hpicfPim 7 }
|
|
|
|
hpicfPimComponentEntry OBJECT-TYPE
|
|
SYNTAX HpicfPimComponentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "HP extensions for an entry in the pimComponentTable."
|
|
AUGMENTS { pimComponentEntry }
|
|
::= { hpicfPimComponentTable 1 }
|
|
|
|
HpicfPimComponentEntry ::=
|
|
SEQUENCE {
|
|
-- ------------------
|
|
-- read-write objects
|
|
-- ------------------
|
|
hpicfPimComponentCBSRAdminStatus INTEGER,
|
|
hpicfPimComponentCBSRAddress IpAddress,
|
|
hpicfPimComponentCBSRPriority Integer32,
|
|
hpicfPimComponentCBSRHashMaskLength Integer32,
|
|
hpicfPimComponentCBSRMessageInterval Integer32,
|
|
hpicfPimComponentCRPPriority Integer32,
|
|
-- ------------------
|
|
-- read-only objects
|
|
-- ------------------
|
|
hpicfPimComponentCRPAdvInterval Unsigned32,
|
|
hpicfPimComponentBSRPriority Unsigned32,
|
|
hpicfPimComponentBSRHashMaskLength Unsigned32,
|
|
hpicfPimComponentBSRUpTime TimeTicks,
|
|
hpicfPimComponentBSRNextMessage TimeTicks
|
|
}
|
|
|
|
hpicfPimComponentCBSRAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This objects specifies whether or not the router
|
|
configured to be a Candidate BSR for the local
|
|
PIM region. Default is disabled."
|
|
DEFVAL { disable }
|
|
::= { hpicfPimComponentEntry 1 }
|
|
|
|
hpicfPimComponentCBSRAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The IP address the Candidate BSR router will advertise
|
|
for the local PIM region."
|
|
::= { hpicfPimComponentEntry 2 }
|
|
|
|
hpicfPimComponentCBSRPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The priority for Candidate BSR router. In BSR election
|
|
process the candidate BSR with the highest (numerically
|
|
bigger) priority becomes the BSR. If the priority values
|
|
are the same, the router with the larger IP address is
|
|
the BSR. Default is 0."
|
|
DEFVAL { 0 }
|
|
::= { hpicfPimComponentEntry 3 }
|
|
|
|
hpicfPimComponentCBSRHashMaskLength OBJECT-TYPE
|
|
SYNTAX Integer32 (1..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Specifies the length (in bits) of a multicast group
|
|
address to use when mapping a group to one of the
|
|
candidate RPs from the RP-Set whose group-prefix
|
|
includes the group. The recommended value for IPv4
|
|
is 30, for IPv6 is 126. Default is 30."
|
|
DEFVAL { 30 }
|
|
::= { hpicfPimComponentEntry 4 }
|
|
|
|
hpicfPimComponentCBSRMessageInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (5..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "If this router is the elected BSR, then this is the
|
|
interval for sending (multicast out) periodic Bootstrap
|
|
(RP-Set) messages on all PIM SM interfaces.
|
|
Default is 60 seconds."
|
|
DEFVAL { 60 }
|
|
::= { hpicfPimComponentEntry 5 }
|
|
|
|
hpicfPimComponentCRPPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The priority for the Candidate RP for the local PIM
|
|
domain. Determines which Candidate RPs get selected by
|
|
the BSR to be in the RP Set. The smaller value means
|
|
the higher priority (a value of zero is the highest
|
|
possible priority). Default is 192."
|
|
DEFVAL { 192 }
|
|
::= { hpicfPimComponentEntry 6 }
|
|
|
|
hpicfPimComponentCRPAdvInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The interval at which the Candidate RP transmits
|
|
(unicast to the elected BSR) advertise messages in
|
|
the local PIM domain."
|
|
::= { hpicfPimComponentEntry 7 }
|
|
|
|
hpicfPimComponentBSRPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The priority of the Bootstrap Router (BSR) elected
|
|
for the local PIM region."
|
|
::= { hpicfPimComponentEntry 8 }
|
|
|
|
hpicfPimComponentBSRHashMaskLength OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The hash mask length of the elected Bootstrap
|
|
Router (BSR)."
|
|
::= { hpicfPimComponentEntry 9 }
|
|
|
|
hpicfPimComponentBSRUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Length of time that the elected Bootstrap Router (BSR)
|
|
has been up."
|
|
::= { hpicfPimComponentEntry 10 }
|
|
|
|
hpicfPimComponentBSRNextMessage OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Time in which the next bootstrap message is due from
|
|
the elected Bootstrap Router (BSR)."
|
|
::= { hpicfPimComponentEntry 11 }
|
|
|
|
-- **********************************************************************
|
|
-- PIM Notifications Trap Definitions
|
|
-- **********************************************************************
|
|
|
|
hpicfPimHardMRTFull NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "This notification signifies that the MRT table is
|
|
full and the error has been originated by hardware.
|
|
This trap should be generated whenever a multicast
|
|
flow or MRT entry cannot be added."
|
|
::= { hpicfPimTraps 1 }
|
|
|
|
hpicfPimSoftMRTFull NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION "This notification signifies that the MRT table is
|
|
full and the error has been originated by software.
|
|
This trap should be generated whenever a multicast
|
|
flow or MRT entry cannot be added."
|
|
::= { hpicfPimTraps 2 }
|
|
|
|
-- **********************************************************************
|
|
-- Conformance Information
|
|
-- **********************************************************************
|
|
|
|
hpicfPimNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS
|
|
{ hpicfPimHardMRTFull,
|
|
hpicfPimSoftMRTFull }
|
|
STATUS current
|
|
DESCRIPTION "A collection of notifications that extends
|
|
notifications defined in RFC 2934 - used for signalling
|
|
important PIM events."
|
|
::= { hpicfPimGroups 1 }
|
|
|
|
hpicfPimBaseGroup OBJECT-GROUP
|
|
OBJECTS { hpicfPimAdminStatus,
|
|
hpicfPimStateRefreshInterval,
|
|
hpicfPimSPTThreshold,
|
|
hpicfPimTrapControl }
|
|
STATUS current
|
|
DESCRIPTION "A collection of objects to support basic PIM
|
|
configuration information on HP routers."
|
|
::= { hpicfPimGroups 2 }
|
|
|
|
hpicfPimStaticRPSetMappingGroup OBJECT-GROUP
|
|
OBJECTS { hpicfPimStaticRPSetOverride,
|
|
hpicfPimStaticRPSetRowStatus }
|
|
STATUS current
|
|
DESCRIPTION "A collection of objects to support management of
|
|
static Rendezvous Point (RP) to IP multicast group
|
|
mappings."
|
|
::= { hpicfPimGroups 3 }
|
|
|
|
hpicfPimSparseIfGroup OBJECT-GROUP
|
|
OBJECTS { hpicfPimIfAddress,
|
|
hpicfPimIfTrigHelloInterval,
|
|
hpicfPimIfHelloHoldtime,
|
|
hpicfPimIfLanPruneDelay,
|
|
hpicfPimIfPropagationDelay,
|
|
hpicfPimIfOverrideInterval,
|
|
hpicfPimIfGenerationID,
|
|
hpicfPimIfJoinPruneHoldtime,
|
|
hpicfPimIfLanDelayEnabled,
|
|
hpicfPimIfDRPriority,
|
|
hpicfPimIfNBRTimeout }
|
|
STATUS current
|
|
DESCRIPTION "A collection of objects that extends objects defined
|
|
in pimInterfaceTable and used to support management of
|
|
interfaces operating in PIM Sparse Mode."
|
|
::= { hpicfPimGroups 4 }
|
|
|
|
hpicfPimDenseIfGroup OBJECT-GROUP
|
|
OBJECTS { hpicfPimIfAddress,
|
|
hpicfPimIfTrigHelloInterval,
|
|
hpicfPimIfHelloHoldtime,
|
|
hpicfPimIfLanPruneDelay,
|
|
hpicfPimIfPropagationDelay,
|
|
hpicfPimIfOverrideInterval,
|
|
hpicfPimIfGenerationID,
|
|
hpicfPimIfJoinPruneHoldtime,
|
|
hpicfPimIfGraftRetryInterval,
|
|
hpicfPimIfMaxGraftRetries,
|
|
hpicfPimIfSRTTLThreshold,
|
|
hpicfPimIfLanDelayEnabled,
|
|
hpicfPimIfSRCapable,
|
|
hpicfPimIfDRPriority }
|
|
STATUS current
|
|
DESCRIPTION "A collection of objects that extends objects defined
|
|
in pimInterfaceTable and used to support management of
|
|
interfaces operating in PIM Dense Mode."
|
|
::= { hpicfPimGroups 5 }
|
|
|
|
hpicfPimComponentGroup OBJECT-GROUP
|
|
OBJECTS { hpicfPimComponentCBSRAdminStatus,
|
|
hpicfPimComponentCBSRAddress,
|
|
hpicfPimComponentCBSRPriority,
|
|
hpicfPimComponentCBSRHashMaskLength,
|
|
hpicfPimComponentCBSRMessageInterval,
|
|
hpicfPimComponentCRPPriority,
|
|
hpicfPimComponentCRPAdvInterval,
|
|
hpicfPimComponentBSRPriority,
|
|
hpicfPimComponentBSRHashMaskLength,
|
|
hpicfPimComponentBSRUpTime,
|
|
hpicfPimComponentBSRNextMessage }
|
|
STATUS current
|
|
DESCRIPTION "A collection of objects that extends objects defined
|
|
in pimComponentTable (RFC 2934)."
|
|
::= { hpicfPimGroups 6 }
|
|
|
|
-- **********************************************************************
|
|
-- Compliance statements
|
|
-- **********************************************************************
|
|
|
|
hpicfPimSparseMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The compliance statement for HP routers running
|
|
PIM Sparse Mode and implementing the HP-ICF-PIM MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { hpicfPimBaseGroup,
|
|
hpicfPimStaticRPSetMappingGroup,
|
|
hpicfPimSparseIfGroup,
|
|
hpicfPimComponentGroup }
|
|
::= { hpicfPimCompliances 1 }
|
|
|
|
hpicfPimDenseMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The compliance statement for HP routers running
|
|
PIM Dense Mode and implementing the HP-ICF-PIM MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { hpicfPimBaseGroup,
|
|
hpicfPimDenseIfGroup }
|
|
::= { hpicfPimCompliances 2 }
|
|
|
|
END
|