853 lines
36 KiB
Plaintext
853 lines
36 KiB
Plaintext
-- ===================================================================
|
|
-- Copyright (C) 2013 by HUAWEI TECHNOLOGIES. All rights reserved.
|
|
-- Description: This MIB provides management of MPLS basic configurations.
|
|
-- It is an extension of MPLS-LSR-STD-MIB.
|
|
-- Reference:
|
|
-- Version: V2.01
|
|
-- History:
|
|
-- V2.01 ZhangAiFen, 2013-09-24, revision
|
|
-- ===================================================================
|
|
-- ==================================================================
|
|
--
|
|
-- Variables and types be imported
|
|
--
|
|
-- ==================================================================
|
|
|
|
HUAWEI-MPLSLSR-EXT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
hwDatacomm
|
|
FROM HUAWEI-MIB
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
MplsLabel
|
|
FROM MPLS-TC-STD-MIB -- [RFC3811]
|
|
EnabledStatus
|
|
FROM P-BRIDGE-MIB
|
|
DisplayString, RowStatus
|
|
FROM SNMPv2-TC
|
|
Integer32, IpAddress, OBJECT-TYPE, Unsigned32,
|
|
MODULE-IDENTITY, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI;
|
|
|
|
hwMplsLsrExtMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201309241655Z" -- Sep 24, 2013 at 16:55 GMT
|
|
ORGANIZATION
|
|
"Huawei Technologies Co.,Ltd."
|
|
CONTACT-INFO
|
|
"Huawei Industrial Base
|
|
Bantian, Longgang
|
|
Shenzhen 518129
|
|
People's Republic of China
|
|
Website: http://www.huawei.com
|
|
Email: support@huawei.com
|
|
"
|
|
DESCRIPTION
|
|
"This MIB provides management of MPLS basic configurations.
|
|
It is an extension of MPLS-LSR-STD-MIB."
|
|
|
|
-- Revision history
|
|
REVISION "201309241655Z"
|
|
DESCRIPTION "V2.01, added six nodes about MPLS BGP BFD configuration management."
|
|
|
|
REVISION "201107301100Z"
|
|
DESCRIPTION "V2.00, delete Delval clause in these nodes: hwMplsLabelAdvertise, hwLdpVirtualStatus."
|
|
|
|
REVISION "201011221600Z"
|
|
DESCRIPTION "V1.03, modified the description."
|
|
|
|
REVISION "201008111600Z"
|
|
DESCRIPTION "V1.02, modified the description."
|
|
|
|
REVISION "201007121600Z"
|
|
DESCRIPTION "V1.01, added the object hwMplsStaticLspTable and modified the description."
|
|
|
|
REVISION "200903101600Z"
|
|
DESCRIPTION "V1.00, initial version for the configuration of MPLS capabilities."
|
|
::= { hwDatacomm 182 }
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
hwMplsLsrExtObject OBJECT IDENTIFIER ::= { hwMplsLsrExtMIB 1 }
|
|
|
|
|
|
hwMplsLsrId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the configuration of the MPLS LSR ID.
|
|
Before the MPLS capability is enabled, the MPLS LSR ID must be configured.
|
|
After the MPLS capability is enabled, the MPLS LSR ID cannot be modified or deleted.
|
|
If the MPLS LSR ID is set as 0.0.0.0, it indicates that the MPLS LSR ID is deleted.
|
|
The MPLS LSR ID and the MPLS capability cannot be configured together."
|
|
::= { hwMplsLsrExtObject 1 }
|
|
|
|
hwMplsCapabilityConfig OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the configuration or deletion of the MPLS capability.
|
|
Before the MPLS capability is enabled, the MPLS LSR ID must be configured."
|
|
::= { hwMplsLsrExtObject 2 }
|
|
|
|
hwMplsLabelAdvertise OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
explicitNull(1),
|
|
implicitNull(2),
|
|
nonNull(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the way to configure label advertisement policy.
|
|
By default, the label advertisement policy is implicitnull.
|
|
Before the label advertisement policy is configured, MPLS capability must be enabled.
|
|
Options:
|
|
1. explicitNull(1) -indicates that the label advertisement policy is explicitNull.
|
|
2. implicitNull(2) -indicates that the label advertisement policy is implicitNull.
|
|
3. nonNull(3) -indicates that the label advertisement policy is nonNull.
|
|
Default: implicitNull(2)
|
|
"
|
|
::= { hwMplsLsrExtObject 3 }
|
|
hwMplsStatisticsIntervalTimer OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the value of the MPLS statistics timer.
|
|
Range: 30-65535
|
|
Default: 0
|
|
Unit: seconds
|
|
"
|
|
::= { hwMplsLsrExtObject 4 }
|
|
hwMplsBfdCapabilityConfig OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the configuration or deletion of the MPLS BFD capability.
|
|
Before the MPLS BFD function is enabled, you must enable the MPLS capability and BFD capability."
|
|
::= { hwMplsLsrExtObject 5 }
|
|
|
|
hwMplsBfdMinTx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the minimum forwarding period.
|
|
If the minimum forwarding period is set as 0 seconds,
|
|
it indicates that the minimum forwarding period returns to the default value."
|
|
::= { hwMplsLsrExtObject 6 }
|
|
|
|
hwMplsBfdMinRx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the minimum receiving period.
|
|
If the minimum receiving period is set as 0 seconds,
|
|
it indicates that the minimum receiving period returns to the default value."
|
|
::= { hwMplsLsrExtObject 7 }
|
|
|
|
hwMplsBfdDetectMultiplier OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the value of the detect multiplier.
|
|
If the value of the detect multiplier is set as 0,
|
|
it indicates that the value returns to the default value."
|
|
::= { hwMplsLsrExtObject 8 }
|
|
|
|
hwMplsFecListName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the name of the FEC LIST.
|
|
The name of the FEC LIST is globally unique, with a valid length from 1 to 31 characters.
|
|
If the character length is 0, it indicates that the FEC LIST is deleted.
|
|
Furthermore, the FEC LIST cannot be modified, and you can only delete the FEC LIST and then create a new one.
|
|
If the FEC LIST is used by others, you need to cancel the usage and then delete the FEC LIST.
|
|
Range: 1-31
|
|
"
|
|
::= { hwMplsLsrExtObject 9 }
|
|
|
|
hwMplsBfdTrigger OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
triggerHost(1),
|
|
triggerFeclist(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the MPLS BFD triggering policy.
|
|
By using this object, you can also specify the next hop and the outgoing interface.
|
|
To configure the MPLS BFD triggering policy, you must enable MPLS and BFD in advance.
|
|
In addition, this MPLS BFD triggering policy cannot be modified,
|
|
and you can only delete the policy and then create a new one.
|
|
Options:
|
|
1. triggerHost(1) -indicates that the MPLS BFD triggering policy was configured as host.
|
|
2. triggerFeclist(2) -indicates that the MPLS BFD triggering policy was configured as FEC list.
|
|
3. disabled(3) -indicates that the MPLS BFD triggering policy was not configured.
|
|
Default: triggerHost(1)
|
|
"
|
|
::= { hwMplsLsrExtObject 10 }
|
|
|
|
hwMplsBfdTriggerNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the next hop when the MPLS BFD trigger policy is configured as host.
|
|
The next hop and the outgoing interface can be specified at the same time."
|
|
::= { hwMplsLsrExtObject 11 }
|
|
|
|
hwMplsBfdTriggerInterface OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the outgoing interface when the MPLS BFD trigger policy is configured as host.
|
|
The next hop and the outgoing interface can be specified at the same time.
|
|
In addition, you can get the correct interface index based on the ifIndex of ifTable."
|
|
::= { hwMplsLsrExtObject 12 }
|
|
|
|
hwMplsBfdTriggerFecListName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the FEC list when the MPLS BFD trigger policy is configured.
|
|
The valid length of the FEC list ranges from 1 to 31 characters.
|
|
If the specified FEC list does not exist, or the specified FEC list contains no FEC node, no LSP can be triggered.
|
|
Range: 1-31
|
|
"
|
|
::= { hwMplsLsrExtObject 13 }
|
|
|
|
hwLdpVirtualTunnelFEC OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the LDP virtual tunnel FEC."
|
|
::= { hwMplsLsrExtObject 14 }
|
|
hwMplsBgpBfdCapabilityConfig OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the configuration or deletion of the MPLS BGP BFD capability.
|
|
Before the MPLS BGP BFD function is enabled, you must enable the MPLS capability and BFD capability."
|
|
::= { hwMplsLsrExtObject 15 }
|
|
|
|
hwMplsBgpBfdMinTx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the minimum forwarding period.
|
|
If the minimum forwarding period is set as 0 seconds,
|
|
it indicates that the minimum forwarding period returns to the default value."
|
|
::= { hwMplsLsrExtObject 16 }
|
|
|
|
hwMplsBgpBfdMinRx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the minimum receiving period.
|
|
If the minimum receiving period is set as 0 seconds,
|
|
it indicates that the minimum receiving period returns to the default value."
|
|
::= { hwMplsLsrExtObject 17 }
|
|
|
|
hwMplsBgpBfdDetectMultiplier OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the value of the detect multiplier.
|
|
If the value of the detect multiplier is set as 0,
|
|
it indicates that the value returns to the default value."
|
|
::= { hwMplsLsrExtObject 18 }
|
|
|
|
hwMplsBgpBfdTriggerTunnel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
triggerHost(1),
|
|
triggerIpPrefix(2),
|
|
disabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the MPLS BGP BFD triggering policy.
|
|
To configure the MPLS BGP BFD triggering policy, you must enable MPLS and BFD in advance.
|
|
Options:
|
|
1. triggerHost(1) -indicates that the MPLS BGP BFD triggering policy was configured as host.
|
|
2. triggerIpPrefix(2) -indicates that the MPLS BGP BFD triggering policy was configured as Ip Prefix.
|
|
3. disabled(3) -indicates that the MPLS BGP BFD triggering policy was not configured.
|
|
Default: disabled(3)
|
|
"
|
|
::= { hwMplsLsrExtObject 19 }
|
|
|
|
hwMplsBgpBfdTriggerTunnelIpprefix OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the IP Prefix name when the MPLS BGP BFD trigger policy is configured.
|
|
The valid length of the IP prefix name ranges from 1 to 169 characters.
|
|
Range: 1-169
|
|
"
|
|
::= { hwMplsLsrExtObject 20 }
|
|
|
|
-- Mpls Fec List Table
|
|
|
|
hwMplsFecListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwMplsFecListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure or delete MPLS FEC Node.
|
|
The indexes of this table are hwMplsFecNodeIpAddress, hwMplsFecNodeInterface, and hwMplsFecNodeNextHop.
|
|
"
|
|
::= { hwMplsLsrExtObject 50 }
|
|
|
|
hwMplsFecListEntry OBJECT-TYPE
|
|
SYNTAX HwMplsFecListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An FEC node entry of FEC list table. It can be created, or deleted.
|
|
The indexes of this entry are hwMplsFecNodeIpAddress, hwMplsFecNodeInterface, and hwMplsFecNodeNextHop.
|
|
"
|
|
INDEX { hwMplsFecNodeIpAddress, hwMplsFecNodeInterface, hwMplsFecNodeNextHop }
|
|
::= { hwMplsFecListTable 1 }
|
|
|
|
|
|
HwMplsFecListEntry ::=
|
|
SEQUENCE {
|
|
hwMplsFecNodeIpAddress
|
|
IpAddress,
|
|
hwMplsFecNodeInterface
|
|
Unsigned32,
|
|
hwMplsFecNodeNextHop
|
|
IpAddress,
|
|
hwMplsFecListRowStatus
|
|
RowStatus
|
|
}
|
|
hwMplsFecNodeIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the IP address of the specified FEC node."
|
|
::= { hwMplsFecListEntry 2 }
|
|
|
|
hwMplsFecNodeInterface OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the outgoing interface of the FEC node.
|
|
You can get the correct interface index based on the ifIndex of ifTable."
|
|
::= { hwMplsFecListEntry 3 }
|
|
|
|
hwMplsFecNodeNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the next hop of the FEC node."
|
|
::= { hwMplsFecListEntry 4 }
|
|
|
|
hwMplsFecListRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether one entry of FEC list table is created or destroyed.
|
|
The value of the object can be CreatAndGo or Destroy.
|
|
If the value is set as CreatAndGo, and the entry is created in hwFecListTable, the status of the object will change into active."
|
|
::= { hwMplsFecListEntry 51 }
|
|
|
|
-- Mpls interface Table
|
|
|
|
hwMplsInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwMplsInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure or delete the MPLS capability on the interface.
|
|
The index of this table is hwMplsInterfaceIndex.
|
|
"
|
|
::= { hwMplsLsrExtObject 51 }
|
|
|
|
hwMplsInterfaceEntry OBJECT-TYPE
|
|
SYNTAX HwMplsInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the MPLS interface table, used to display and configure features on the MPLS-supporting interface.
|
|
The index of this entry is hwMplsInterfaceIndex.
|
|
"
|
|
INDEX {hwMplsInterfaceIndex }
|
|
::= { hwMplsInterfaceTable 1 }
|
|
|
|
|
|
HwMplsInterfaceEntry ::=
|
|
SEQUENCE {
|
|
hwMplsInterfaceIndex
|
|
InterfaceIndex,
|
|
hwMplsMtu
|
|
Integer32,
|
|
hwMplsInterfaceRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
hwMplsInterfaceIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the interface index.
|
|
You can get the correct interface index based on the ifIndex of ifTable."
|
|
::= { hwMplsInterfaceEntry 1 }
|
|
|
|
|
|
hwMplsMtu OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the MPLS MTU of an interface.
|
|
If the value of the MPLS MTU is set as 0, it indicates that the MPLS MTU is deleted."
|
|
::= { hwMplsInterfaceEntry 11 }
|
|
|
|
|
|
hwMplsInterfaceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether one entry is created or deleted in hwMplsInterfaceTable.
|
|
The value of the object can be CreatAndGo and Destroy.
|
|
When the value is set as CreatAndGo, and the entry is created, the status of the object will change into active."
|
|
::= { hwMplsInterfaceEntry 51 }
|
|
|
|
-- Ldp Static FRR interface Table
|
|
|
|
hwLdpStaticFrrInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwLdpStaticFrrInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure or delete static LDP FRR entries on the interface.
|
|
The indexes of this table are hwMplsInterfaceIndex and hwLdpStaticFrrPriority.
|
|
"
|
|
::= { hwMplsLsrExtObject 52 }
|
|
|
|
hwLdpStaticFrrInterfaceEntry OBJECT-TYPE
|
|
SYNTAX HwLdpStaticFrrInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry is used to display and configure the FRR-supporting interface.
|
|
The indexes of this entry are hwMplsInterfaceIndex and hwLdpStaticFrrPriority.
|
|
"
|
|
INDEX {hwMplsInterfaceIndex,
|
|
hwLdpStaticFrrPriority }
|
|
::= { hwLdpStaticFrrInterfaceTable 1 }
|
|
|
|
|
|
HwLdpStaticFrrInterfaceEntry ::=
|
|
SEQUENCE {
|
|
hwLdpStaticFrrPriority
|
|
Integer32,
|
|
hwLdpStaticFrrNextHop
|
|
IpAddress,
|
|
hwLdpStaticFrrIpPrefix
|
|
DisplayString,
|
|
hwLdpStaticFrrInterfaceRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
hwLdpStaticFrrPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the priority of a static FRR entry."
|
|
::= { hwLdpStaticFrrInterfaceEntry 1 }
|
|
|
|
hwLdpStaticFrrNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the next hop of the static FRR."
|
|
::= { hwLdpStaticFrrInterfaceEntry 11 }
|
|
|
|
hwLdpStaticFrrIpPrefix OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the IP prefix policy.
|
|
The valid prefix length ranges from 1 to 169 characters.
|
|
When the length is 0, it indicates that the policy is deleted.
|
|
Range: 1-169
|
|
"
|
|
::= { hwLdpStaticFrrInterfaceEntry 12 }
|
|
|
|
hwLdpStaticFrrInterfaceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether one entry is created or deleted in hwLdpStaticFrrInterfaceTable.
|
|
The value of the object can be CreatAndGo or Destroy.
|
|
When the value is set as CreatAndGo, and the entry is created, the status of the object will change into active."
|
|
::= { hwLdpStaticFrrInterfaceEntry 51 }
|
|
|
|
-- Ldp Virtual Tunnel interface Table
|
|
|
|
hwLdpVirtualTunnelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwLdpVirtualTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies LDP virtual tunnel information.
|
|
The index of this table is hwLdpVirtualTunnelIndex.
|
|
"
|
|
::= { hwMplsLsrExtObject 53 }
|
|
|
|
hwLdpVirtualTunnelEntry OBJECT-TYPE
|
|
SYNTAX HwLdpVirtualTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of the virtual tunnel table, used to display the features associated with the virtual tunnel.
|
|
The index of this entry is hwLdpVirtualTunnelIndex.
|
|
"
|
|
INDEX { hwLdpVirtualTunnelIndex }
|
|
::= { hwLdpVirtualTunnelTable 1 }
|
|
|
|
HwLdpVirtualTunnelEntry ::=
|
|
SEQUENCE {
|
|
hwLdpVirtualTunnelIndex Unsigned32,
|
|
hwLdpVirtualStatus INTEGER,
|
|
hwLdpXcIndexArray OCTET STRING,
|
|
hwLdpOutSegmentIndexArray OCTET STRING
|
|
}
|
|
|
|
hwLdpVirtualTunnelIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the LDP virtual tunnel index."
|
|
::= { hwLdpVirtualTunnelEntry 1 }
|
|
|
|
hwLdpVirtualStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2),
|
|
testing(3) -- in some test mode
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this LDP virtual tunnel.
|
|
Options:
|
|
1. up(1) -indicates that the status of this LDP virtual tunnel is Up.
|
|
2. down(2) -indicates that the status of this LDP virtual tunnel is Down.
|
|
3. testing(3) -indicates that the status of this LDP virtual tunnel is testing, this is, in some test mode.
|
|
Default: up(1)
|
|
"
|
|
::= { hwLdpVirtualTunnelEntry 2 }
|
|
|
|
hwLdpXcIndexArray OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the xc index of the members of the LDP virtual tunnel."
|
|
::= { hwLdpVirtualTunnelEntry 3 }
|
|
|
|
hwLdpOutSegmentIndexArray OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the outsegment index of the members of the LDP virtual tunnel."
|
|
::= { hwLdpVirtualTunnelEntry 4 }
|
|
|
|
hwLdpVirtualTunnelTrap OBJECT IDENTIFIER ::= { hwMplsLsrExtObject 54 }
|
|
|
|
hwMplsLdpVirtualTunnelUp NOTIFICATION-TYPE
|
|
OBJECTS { hwLdpVirtualTunnelFEC }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A trap is sent when an LDP virtual tunnel goes Up."
|
|
::= { hwLdpVirtualTunnelTrap 1 }
|
|
|
|
hwMplsLdpVirtualTunnelDown NOTIFICATION-TYPE
|
|
OBJECTS { hwLdpVirtualTunnelFEC }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A trap is sent when an LDP virtual tunnel goes Down."
|
|
::= { hwLdpVirtualTunnelTrap 2 }
|
|
|
|
-- Static LSP Table
|
|
|
|
hwMplsStaticLspTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwMplsStaticLspEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to create or delete static LSP configurations.
|
|
The index of this table is hwMplsStaticLspName.
|
|
"
|
|
::= { hwMplsLsrExtObject 55 }
|
|
|
|
hwMplsStaticLspEntry OBJECT-TYPE
|
|
SYNTAX HwMplsStaticLspEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry is used to show or configure static LSP.
|
|
The index of this entry is hwMplsStaticLspName.
|
|
"
|
|
INDEX {hwMplsStaticLspName }
|
|
::= { hwMplsStaticLspTable 1 }
|
|
|
|
HwMplsStaticLspEntry ::=
|
|
SEQUENCE {
|
|
hwMplsStaticLspName
|
|
DisplayString,
|
|
hwMplsStaticLspType
|
|
INTEGER,
|
|
hwMplsStaticLspInIntfIndex
|
|
Unsigned32,
|
|
hwMplsStaticLspInLabel
|
|
MplsLabel,
|
|
hwMplsStaticLspLsrId
|
|
IpAddress,
|
|
hwMplsStaticLspTunnelID
|
|
Unsigned32,
|
|
hwMplsStaticLspNextHop
|
|
IpAddress,
|
|
hwMplsStaticLspOutIntfIndex
|
|
Unsigned32,
|
|
hwMplsStaticLspOutLabel
|
|
MplsLabel,
|
|
hwMplsStaticLspDestAddr
|
|
IpAddress,
|
|
hwMplsStaticLspMaskLen
|
|
Unsigned32,
|
|
hwMplsStaticLspRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
hwMplsStaticLspName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the name of static LSP."
|
|
::= { hwMplsStaticLspEntry 1 }
|
|
|
|
hwMplsStaticLspType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ingress(1),
|
|
transit(2),
|
|
egress(3),
|
|
ingressBindTunnel(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to identify the type of static LSP.
|
|
Options:
|
|
1. ingress(1) -indicates that the type of the static LSP is ingress.
|
|
2. transit(2) -indicates that the type of the static LSP is transit.
|
|
3. egress(3) -indicates that the type of the static LSP is egress.
|
|
4. ingressBindTunnel(4) -indicates that the type of the static LSP is ingress-bind-tunnel.
|
|
"
|
|
::= { hwMplsStaticLspEntry 11 }
|
|
|
|
hwMplsStaticLspInIntfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the incoming-interface index."
|
|
::= { hwMplsStaticLspEntry 12 }
|
|
|
|
hwMplsStaticLspInLabel OBJECT-TYPE
|
|
SYNTAX MplsLabel
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the in-label."
|
|
::= { hwMplsStaticLspEntry 13 }
|
|
|
|
hwMplsStaticLspLsrId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the LSR ID of ingress static LSP."
|
|
::= { hwMplsStaticLspEntry 14 }
|
|
|
|
hwMplsStaticLspTunnelID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Tunnel ID of ingress static LSP."
|
|
::= { hwMplsStaticLspEntry 15 }
|
|
|
|
hwMplsStaticLspNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the nexthop of static LSP."
|
|
::= { hwMplsStaticLspEntry 16 }
|
|
|
|
hwMplsStaticLspOutIntfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the outgoing-interface index."
|
|
::= { hwMplsStaticLspEntry 17 }
|
|
|
|
hwMplsStaticLspOutLabel OBJECT-TYPE
|
|
SYNTAX MplsLabel
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the out-label."
|
|
::= { hwMplsStaticLspEntry 18 }
|
|
|
|
hwMplsStaticLspDestAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the destination."
|
|
::= { hwMplsStaticLspEntry 19 }
|
|
|
|
hwMplsStaticLspMaskLen OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the mask length."
|
|
::= { hwMplsStaticLspEntry 20 }
|
|
|
|
hwMplsStaticLspRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether one entry is created or deleted in hwMplsStaticLspTable.
|
|
The value of the object can be CreateAndGo or Destroy.
|
|
When the value is set as CreateAndGo, and the entry is created, the status of the object will change into active."
|
|
::= { hwMplsStaticLspEntry 51 }
|
|
|
|
hwMplsLsrExtConformance OBJECT IDENTIFIER ::= { hwMplsLsrExtMIB 2 }
|
|
|
|
hwMplsLsrExtCompliances OBJECT IDENTIFIER ::= { hwMplsLsrExtConformance 1 }
|
|
|
|
hwMplsModuleCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"hwMplsModuleCompliance"
|
|
MODULE HUAWEI-MPLSLSR-EXT-MIB
|
|
MANDATORY-GROUPS { hwMplsBasicGroup, hwMplsInterfaceGroup }
|
|
::= { hwMplsLsrExtCompliances 1 }
|
|
|
|
hwMplsLsrExtGroup OBJECT IDENTIFIER ::= { hwMplsLsrExtConformance 2 }
|
|
|
|
hwMplsBasicGroup OBJECT-GROUP
|
|
OBJECTS { hwMplsLsrId, hwMplsCapabilityConfig, hwMplsLabelAdvertise, hwMplsStatisticsIntervalTimer
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects required for MPLS basic configuration management."
|
|
::= { hwMplsLsrExtGroup 1 }
|
|
hwMplsBfdGroup OBJECT-GROUP
|
|
OBJECTS { hwMplsBfdCapabilityConfig, hwMplsBfdMinTx, hwMplsBfdMinRx, hwMplsBfdDetectMultiplier, hwMplsFecListName,
|
|
hwMplsBfdTrigger, hwMplsBfdTriggerNextHop, hwMplsBfdTriggerInterface, hwMplsBfdTriggerFecListName,
|
|
hwMplsFecListRowStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects required for MPLS BFD configuration management."
|
|
::= { hwMplsLsrExtGroup 2 }
|
|
|
|
hwLdpStaticFrrGroup OBJECT-GROUP
|
|
OBJECTS { hwLdpStaticFrrNextHop, hwLdpStaticFrrIpPrefix, hwLdpStaticFrrInterfaceRowStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects required for LDP static FRR configuration management."
|
|
::= { hwMplsLsrExtGroup 3 }
|
|
|
|
hwMplsInterfaceGroup OBJECT-GROUP
|
|
OBJECTS { hwMplsMtu, hwMplsInterfaceRowStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects required for MPLS configuration management on interface."
|
|
::= { hwMplsLsrExtGroup 4 }
|
|
|
|
hwMplsLdpVirtualTunnelGroup OBJECT-GROUP
|
|
OBJECTS { hwLdpVirtualTunnelFEC, hwLdpVirtualStatus, hwLdpXcIndexArray, hwLdpOutSegmentIndexArray }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects required for LDP virtual tunnel management."
|
|
::= { hwMplsLsrExtGroup 5 }
|
|
|
|
hwMplsLdpVirtualTunnelNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { hwMplsLdpVirtualTunnelUp, hwMplsLdpVirtualTunnelDown }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Notification information about LDP virtual tunnel."
|
|
::= { hwMplsLsrExtGroup 6 }
|
|
|
|
hwMplsStaticLspGroup OBJECT-GROUP
|
|
OBJECTS { hwMplsStaticLspType, hwMplsStaticLspInIntfIndex, hwMplsStaticLspInLabel, hwMplsStaticLspLsrId, hwMplsStaticLspTunnelID,
|
|
hwMplsStaticLspNextHop, hwMplsStaticLspOutIntfIndex, hwMplsStaticLspOutLabel, hwMplsStaticLspDestAddr, hwMplsStaticLspMaskLen, hwMplsStaticLspRowStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects required for static LSP configuration management."
|
|
::= { hwMplsLsrExtGroup 7 }
|
|
|
|
hwMplsBgpBfdGroup OBJECT-GROUP
|
|
OBJECTS { hwMplsBgpBfdCapabilityConfig, hwMplsBgpBfdMinTx, hwMplsBgpBfdMinRx, hwMplsBgpBfdDetectMultiplier,
|
|
hwMplsBgpBfdTriggerTunnel, hwMplsBgpBfdTriggerTunnelIpprefix }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects required for MPLS BGP BFD configuration management."
|
|
::= { hwMplsLsrExtGroup 8 }
|
|
|
|
END
|
|
|
|
--
|
|
-- HUAWEI-MPLSLSR-EXT-MIB.mib
|
|
--
|