david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/ibm/IBM-GbTOR-10G-L2L3-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

56592 lines
1.5 MiB
Raw Permalink Blame History

-- ----------------------------------------------------------------------------
-- File Main Owner:
-- File Peer Owner:
-- File Description: Main entry point to build private MIBs.
--
--
-- { COPYRIGHT / HISTORY
--
--
--
-- PORTING HISTORY
--
-- } COPYRIGHT / HISTORY (end)
--
-- ----------------------------------------------------------------------------
-- { INSERT: blade
-- ----------------------------------------------------------------------------
IBM-GbTOR-10G-L2L3-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, Integer32, Unsigned32, Counter32, Gauge32, Counter64,
TimeTicks, IpAddress
FROM SNMPv2-SMI
DisplayString, PhysAddress, MacAddress, TruthValue, RowStatus
FROM SNMPv2-TC
BridgeId
FROM BRIDGE-MIB
sysName, sysLocation, sysContact, ifIndex
FROM RFC1213-MIB
enterprises
FROM RFC1155-SMI
InetAddressType, InetAddress, InetAddressIPv6
FROM INET-ADDRESS-MIB
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY,
Integer32, Unsigned32, Counter32, Gauge32, Counter64,
TimeTicks, IpAddress, mib-2
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue, DisplayString, PhysAddress,
MacAddress, RowStatus, TimeInterval, TimeStamp, RowPointer,
AutonomousType, StorageType, TDomain, TAddress
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
BridgeId, dot1dTp, dot1dTpPort, dot1dBridge, dot1dBasePortEntry,
dot1dBasePort
FROM BRIDGE-MIB
EnabledStatus
FROM P-BRIDGE-MIB
PortList
FROM Q-BRIDGE-MIB
SnmpAdminString, SnmpEngineID,SnmpMessageProcessingModel,
SnmpSecurityModel,SnmpSecurityLevel FROM SNMP-FRAMEWORK-MIB
usmNoAuthProtocol, usmNoPrivProtocol FROM SNMP-USER-BASED-SM-MIB
sysName, sysLocation, sysContact, ifIndex
FROM RFC1213-MIB
InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
;
-- ----------------------------------------------------------------------------
-- { INSERT: module identity
-- ----------------------------------------------------------------------------
ibmGbTORG8124MIB MODULE-IDENTITY
LAST-UPDATED "201507212014Z" -- Jul 21, 2015 08:14:46 PM
ORGANIZATION "IBM/System Networking"
CONTACT-INFO "
IBM/System Networking
4400 North First Street
San Jose, CA 95134
408-956-3239
"
DESCRIPTION "
MIB for IBM Networking Operating System RackSwitch G8124
All Rights reserved
DEVICE VERSION: 7.9.14.0
"
::= { blade 3 }
-- ----------------------------------------------------------------------------
-- } INSERT: module identity
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- { INSERT: textual conventions
-- ----------------------------------------------------------------------------
PortNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a port number of a switch."
SYNTAX Unsigned32
VlanId ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A 12-bit VLAN ID used in the VLAN Tag header."
SYNTAX Integer32 (1..4094)
Timeout ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d4"
STATUS current
DESCRIPTION
" Time out value in 4 byte"
SYNTAX Integer32
-- ----------------------------------------------------------------------------
-- } INSERT: textual conventions
-- ----------------------------------------------------------------------------
-- blade OID reference http://www.iana.org/assignments/enterprise-numbers
-- defined in /vobs/webos/src/lib/epi/target/h/wrn/wm/snmp/engine/mib.h
blade OBJECT IDENTIFIER ::= { enterprises 26543 }
-- Groups in blade
registration OBJECT IDENTIFIER ::= { blade 1 }
private-mibs OBJECT IDENTIFIER ::= { blade 2 }
-- Access Switch for BNT Private MIBs
-- bnt-switch OBJECT IDENTIFIER ::= { private-mibs 7 }
-- ----------------------------------------------------------------------------
-- { INSERT: bntRoot
-- ----------------------------------------------------------------------------
-- Access Web Switch Module for Private MIBs
ibm-switch-mgmt OBJECT IDENTIFIER
::= { private-mibs 7 }
g8124-mgmt OBJECT IDENTIFIER
::= { ibm-switch-mgmt 4 }
-------------------------------------------------------------------------------
-- Platform Dependent Registration sysObjectID
-- Must correspond to g_sysobjid in /vobs/webos/src/<bert>/ts/mp/sys/config.c
-- and defined in /vobs/webos/src/lib/epi/target/h/wrn/wm/snmp/engine/mib.h.
-- Careful when re-numbering sysObjectIDs due to hard coded references in
-- /vobs/webos/src/<bert>/ts/mp/epi/trap.c
-------------------------------------------------------------------------------
-- Top of Rack Switch
ibm-switch OBJECT IDENTIFIER
::= { registration 7 }
g8124 OBJECT IDENTIFIER
::= { ibm-switch 4 } -- G8124 switch
-------------------------------------------------------------------------------
-- Platform Common Private MIBs for g8124-mgmt
-------------------------------------------------------------------------------
agent OBJECT IDENTIFIER ::= { g8124-mgmt 1 }
-- ----------------------------------------------------------------------------
-- { INSERT: agent
-- ----------------------------------------------------------------------------
agentConfig OBJECT IDENTIFIER ::= { agent 1 }
agentStats OBJECT IDENTIFIER ::= { agent 2 }
agentInfo OBJECT IDENTIFIER ::= { agent 3 }
agentOper OBJECT IDENTIFIER ::= { agent 4 }
agSystem OBJECT IDENTIFIER ::= { agentConfig 1 }
agPortConfig OBJECT IDENTIFIER ::= { agentConfig 2 }
agRadiusConfig OBJECT IDENTIFIER ::= { agentConfig 3 }
agNTP OBJECT IDENTIFIER ::= { agentConfig 4 }
agSyslog OBJECT IDENTIFIER ::= { agentConfig 5 }
agTransfer OBJECT IDENTIFIER ::= { agentConfig 7 }
agApply OBJECT IDENTIFIER ::= { agentConfig 8 }
agTacacsConfig OBJECT IDENTIFIER ::= { agentConfig 11 }
agMgmtNetConfig OBJECT IDENTIFIER ::= { agentConfig 12 }
agBoot OBJECT IDENTIFIER ::= { agentConfig 13 }
agAccess OBJECT IDENTIFIER ::= { agentConfig 19 }
agLdapConfig OBJECT IDENTIFIER ::= { agentConfig 21 }
agSSHConfig OBJECT IDENTIFIER ::= { agentConfig 22 }
agsFlowConfig OBJECT IDENTIFIER ::= { agentConfig 24 }
pktStats OBJECT IDENTIFIER ::= { agentStats 1 }
mpCpuStats OBJECT IDENTIFIER ::= { agentStats 2 }
portStats OBJECT IDENTIFIER ::= { agentStats 3 }
agClearStats OBJECT IDENTIFIER ::= { agentStats 7 }
ntpStats OBJECT IDENTIFIER ::= { agentStats 9 }
aclStats OBJECT IDENTIFIER ::= { agentStats 11 }
memoryStats OBJECT IDENTIFIER ::= { agentStats 12 }
snmpStats OBJECT IDENTIFIER ::= { agentStats 20 }
mpTcbStats OBJECT IDENTIFIER ::= { agentStats 21 }
mpUdpStats OBJECT IDENTIFIER ::= { agentStats 22 }
hardware OBJECT IDENTIFIER ::= { agentInfo 1 }
portInfo OBJECT IDENTIFIER ::= { agentInfo 2 }
agDiff OBJECT IDENTIFIER ::= { agentInfo 4 }
agCfgDump OBJECT IDENTIFIER ::= { agentInfo 5 }
geaportInfo OBJECT IDENTIFIER ::= { agentInfo 9 }
sfpInfo OBJECT IDENTIFIER ::= { agentInfo 11 }
accessInfo OBJECT IDENTIFIER ::= { agentInfo 13 }
agNTPOper OBJECT IDENTIFIER ::= { agentOper 2 }
-- There are two configuration blocks.
-- The "current_config" reflects the configuration parameters that the
-- switch is operating on and it is read-only. The objects with "CurCfg"
-- in the name are reflect to this configuration block.
--
-- The "new_config" accepts user configurations on set. The objects with
-- "NewCfg" in the name are reflect to this configuration block.
--
-- The newly set configurations will not take effect until a "apply"
-- command has been issued (See agApplyConfiguration object)
--
-- The newly set configurations will not be saved through next restarting
-- of the switch unless a "save" command has been issued (See
-- agSaveConfiguration object).
-- Hardware Information
hwPartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware part number of the Switch."
::= { hardware 1 }
hwRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware revision. If the revision is not
available, a zero length string should be returned."
::= { hardware 2 }
hwFanStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fan status on the system."
::= { hardware 12 }
hwFanSpeed OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fan speed on the system."
::= { hardware 13 }
hwTempSensors OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature sensors on the system."
::= { hardware 14 }
hwGlobalHealthStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
noncritical(2),
critical(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This variable summarizes the status of several key elements of the device.
OK:
- All temperature sensors are below the warning threshold (eg. < 85 C);
- All fans are running at >= 100 RPMs;
- Both power supplies are on;
- No panic dump exists in flash.
Non-critical:
- One or more temperature sensors is in the warning range (eg. >= 85 and < 100 C);
- A panic dump exists in flash.
Critical:
- One or more temperature sensors is in the failure range (eg. >= 100 C);
- One or more fans are running < 100 RPM;
- One power supply is off.
"
::= { hardware 15 }
hwMainBoardRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The main board revision. If the revision is not
available, a zero length string should be returned."
::= { hardware 11 }
hwESN OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ESN of the switch."
::= { hardware 40 }
-- Port operation table
agPortOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgPortOperTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port operations."
::= { agentOper 1 }
agPortOperTableEntry OBJECT-TYPE
SYNTAX AgPortOperTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port operations table."
INDEX { portOperIdx }
::= { agPortOperTable 1 }
AgPortOperTableEntry ::=
SEQUENCE {
portOperIdx PortNumber,
portOperRmon INTEGER,
portOperLearning INTEGER,
portOperState INTEGER
}
portOperIdx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { agPortOperTableEntry 1 }
portOperState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable port."
::= { agPortOperTableEntry 2 }
portOperRmon OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable RMON for port."
::= { agPortOperTableEntry 3 }
portOperLearning OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable L2 (FDB) Learning for this port."
::= { agPortOperTableEntry 4 }
ntpOperSendReq OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the user to send requests to the NTP server."
::= { agNTPOper 1 }
-- Oper PRM settings
-- Port information table
portInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port information."
::= { portInfo 1 }
portInfoTableEntry OBJECT-TYPE
SYNTAX PortInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port information table."
INDEX { portInfoIndx }
::= { portInfoTable 1 }
PortInfoTableEntry ::= SEQUENCE {
portInfoIndx PortNumber,
portInfoSpeed INTEGER,
portInfoMode INTEGER,
portInfoFlowCtrl INTEGER,
portInfoLink INTEGER,
portInfoPhyIfDescr DisplayString,
portInfoPhyIfType INTEGER,
portInfoPhyIfMtu Integer32,
portInfoPhyIfPhysAddress PhysAddress,
portInfoPhyIfOperStatus INTEGER,
portInfoPhyIfLastChange TimeTicks,
portInfoLearning INTEGER,
portInfoBpduGuard INTEGER,
portInfoPvid Unsigned32,
portInfoVlanTag INTEGER
,portInfoErrDisableRecovery INTEGER
,portInfoErrDisableTimeLeft INTEGER
,portInfoExtGuard INTEGER
,portInfoLFDState INTEGER
}
portInfoIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { portInfoTableEntry 1 }
portInfoSpeed OBJECT-TYPE
SYNTAX INTEGER {
mbs10(2),
mbs100(3),
mbs1000(4),
any(5)
,
mbs10000(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational speed of the port."
::= { portInfoTableEntry 2 }
portInfoMode OBJECT-TYPE
SYNTAX INTEGER {
full-duplex(2),
half-duplex(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational mode of the port."
::= { portInfoTableEntry 3 }
portInfoFlowCtrl OBJECT-TYPE
SYNTAX INTEGER {
transmit(2),
receive(3),
both(4),
none(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational flow control of the port."
::= { portInfoTableEntry 4 }
portInfoLink OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
disabled(3),
inoperative(4), -- unrecognized PCI device
errdisabled(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational link status of the port."
::= { portInfoTableEntry 5 }
portInfoPhyIfDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string containing information about the
interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface."
::= { portInfoTableEntry 6 }
portInfoPhyIfType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
regular1822(2),
hdh1822(3),
ddn-x25(4),
rfc877-x25(5),
ethernet-csmacd(6),
iso88023-csmacd(7),
iso88024-tokenBus(8),
iso88025-tokenRing(9),
iso88026-man(10),
starLan(11),
proteon-10Mbit(12),
proteon-80Mbit(13),
hyperchannel(14),
fddi(15),
lapb(16),
sdlc(17),
ds1(18), -- T-1
e1(19), -- european equiv. of T-1
basicISDN(20),
primaryISDN(21), -- proprietary serial
propPointToPointSerial(22),
ppp(23),
softwareLoopback(24),
eon(25), -- CLNP over IP [11]
ethernet-3Mbit(26),
nsip(27), -- XNS over IP
slip(28), -- generic SLIP
ultra(29), -- ULTRA technologies
ds3(30), -- T-3
sip(31), -- SMDS
frame-relay(32)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack."
::= { portInfoTableEntry 7 }
portInfoPhyIfMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the size
of the largest network datagram that can be sent
on the interface."
::= { portInfoTableEntry 8 }
portInfoPhyIfPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet string of zero length."
::= { portInfoTableEntry 9 }
portInfoPhyIfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3) -- in some test mode
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed."
::= { portInfoTableEntry 10 }
portInfoPhyIfLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network management
subsystem, then this object contains a zero
value."
::= { portInfoTableEntry 11 }
portInfoLearning OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port L2 (FDB) Learning state."
::= { portInfoTableEntry 18 }
portInfoBpduGuard OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of BPDU Guard on the port."
::= { portInfoTableEntry 20 }
portInfoPvid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the operational port vlan-id of the port. Typically,
the value of this object is the same as the value of the
agPortCurCfgPVID object. But if, for example, 802.1x is
enabled on the port and the port is assigned a vlan-id via
802.1x, this port will be moved to the assigned vlan even
when the port is configured with a different PVID."
::= { portInfoTableEntry 21}
portInfoVlanTag OBJECT-TYPE
SYNTAX INTEGER {
untagged(0),
tagged(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the operational VLAN tag state of the port. Typically,
the value of this object is the same as the value of the
agPortCurCfgVlanTag objec. But if, for example, 802.1x is
enabled on the port and if the port is assigned a vlan via
802.1x, the port will be operationally untagged even when the
port is configured to be tagged."
::= { portInfoTableEntry 22}
portInfoErrDisableRecovery OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the system will automatically
re-enable an error-disabled port after the time interval
indicated by agCurCfgErrDisableTimeout has elapsed. A port
is in error-disabled state when it has been operationally
disabled by the system due to an error condition.
The value of this object is 'enable' if the values of both
the global agCurCfgErrDisableRecovery object and the port's
agPortCurCfgErrDisableRecovery object are 'enable'."
::= { portInfoTableEntry 23 }
portInfoErrDisableTimeLeft OBJECT-TYPE
SYNTAX INTEGER (0 .. 86400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the portInfoErrDisableRecovery object has a value of 'enable'
and the portInfoLink object has a value of 'errdisabled', the
value of this object indicates the remaining time, in seconds,
before the system automatically re-enables this port."
::= { portInfoTableEntry 24 }
portInfoExtGuard OBJECT-TYPE
SYNTAX INTEGER {
loop(1),
root(2),
global-loop(3),
no-guard(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of STP Loop/Root Guard on the port."
::= { portInfoTableEntry 25 }
portInfoLFDState OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the port is error-disabled due
to excessive link flaps. The value of this object is 'yes'
if the port is error-disabled due to excessive link flaps,
otherwise the value is 'no'."
::= { portInfoTableEntry 26 }
-- Agent System Group
-- This group of objects take effect on the 'SET' request.
-- There is no need to 'apply' or 'save'.
agApplyConfiguration OBJECT-TYPE
SYNTAX INTEGER {
other(1),
apply(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to apply the changes made to configuration
of the switch. By setting the value to apply(2), all the changes
made since the last apply are written to the new configuration block.
other(1) is returned when this object ie read. "
::= { agSystem 2 }
agSavePending OBJECT-TYPE
SYNTAX INTEGER {
saveNeeded(1),
noSaveNeeded(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when read, gives the user information
whether an save action is needed and that the configuration
has been applied but not saved to the flash."
::= { agSystem 3 }
agSaveConfiguration OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
saveActive(2),
notSaveActive(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to write current configuration to
nonvolatile storage.
When issued with the saveActive, the active configuration
in flash is saved to backup in flash and then the new
configuration is saved to the active configuration in flash.
When issued with notSaveActive, the active configuration
is NOT saved to the flash and the active configuration is
overwritten with the new configuration.
ok(1) is returned always when read."
::= { agSystem 4 }
agRevert OBJECT-TYPE
SYNTAX INTEGER {
other(1),
revert(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to revert the unapplied changes
made to the switch. By setting the value to revert(2),
all the unapplied changes will be reverted. This action
will copy the current_config to the new configuration block.
other(1) is returned when this object is read. "
::= { agSystem 5 }
agReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reboot the agent.
other(1) is returned always when read."
::= { agSystem 7 }
agConfigForNxtReset OBJECT-TYPE
SYNTAX INTEGER {
active(2),
backup(3),
default(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration information to be loaded from at next reset.
The following values are writable:
active(2)...active configuration block
backup(3)...backup configuration block
default(4)..default configuration block"
::= { agSystem 8 }
agImageForNxtReset OBJECT-TYPE
SYNTAX INTEGER {
image1(2),
image2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2"
::= { agSystem 9 }
agSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the software image that is currently running on the
system in the form of 'major.minor.maintenance.bugfix'. A zero
length string is returned if version is not available."
::= { agSystem 10 }
agBootVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the boot code in the form of 'major.minor.bugfix'.
A zero length string is returned if version is not available."
::= { agSystem 11 }
agImage1Ver OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the software image stored in image 1 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid software image."
::= { agSystem 12 }
agImage2Ver OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the software image stored in image 2 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid software image."
::= { agSystem 13 }
agRtcDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date on the real time clock in the form of 'mm/dd/yy'.
A zero length string is returned if date is not available."
::= { agSystem 14 }
agRtcTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time on the real time clock in the form of 'hh:mm:ss'.
A zero length string is returned if time is not available."
::= { agSystem 15 }
agLastSetErrorReason OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error reason of the last SET failure."
::= { agSystem 16 }
agCurCfgHttpServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP port number that the HTTP server is listening to
in the current configuration block."
::= { agSystem 17 }
agNewCfgHttpServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port number that the HTTP server is listening to
in the new configuration block."
::= { agSystem 18 }
agCurCfgLoginBanner OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user defined login banner."
::= { agSystem 19 }
agNewCfgLoginBanner OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user defined login banner."
::= { agSystem 20 }
agCurCfgLoginNotice OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user defined login notice."
::= { agSystem 78 }
agNewCfgLoginNotice OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user defined login notice."
::= { agSystem 79 }
agCurCfgConsole OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable console output of syslog messages."
::= { agSystem 23 }
agNewCfgConsole OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable console output of syslog messages."
::= { agSystem 24 }
agCurCfgBootp OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the use of BootP, as currently configured in the
current configuration block."
::= { agSystem 29 }
agNewCfgBootp OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the use of BootP, in the new configuration block."
::= { agSystem 30 }
agSlotNumber OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the slot in which this switch is installed. If the
agent implementing this MIB is not a blade in a chassis this
value has no meaning."
::= { agSystem 31 }
agCurCfgSnmpTimeout OBJECT-TYPE
SYNTAX INTEGER (1..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Once SNMP operations like agApplyConfig, agDiffState and
agDumpState, which use the state machine are done the resources
used by these operations need to be freed by setting the state
back to 'idle' so others can issue the commands via SNMP.
agSnmpTimeout indicates the number of minutes before the resources
are freed and the state set back to 'idle' if this operation is not
performed by the user."
::= { agSystem 32 }
agNewCfgSnmpTimeout OBJECT-TYPE
SYNTAX INTEGER (1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Once SNMP operations like agApplyConfig, agDiffState and
agDumpState, which use the state machine are done the resources
used by these operations need to be freed by setting the state
back to 'idle' so others can issue the commands via SNMP.
agSnmpTimeout indicates the number of minutes before the resources
are freed and the state set back to 'idle' if this operation is not
performed by the user."
::= { agSystem 33 }
agCurCfgTelnetServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP port number that the telnet server listens for telnet
sessions."
::= { agSystem 34 }
agNewCfgTelnetServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port number that the telnet server listens for telnet
sessions."
::= { agSystem 35 }
agClearFlashDump OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to clear the FLASH dump.
ok(1) is returned when this object is read. "
::= { agSystem 36 }
agCurCfgTrapSrcIf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SNMP trap source interface number."
::= { agSystem 39 }
agNewCfgTrapSrcIf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNMP trap source interface number."
::= { agSystem 40 }
agCurCfgHttpsServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP port number that the HTTPS server is listening to
in the current configuration block."
::= { agSystem 49 }
agNewCfgHttpsServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port number that the HTTPS server is listening to
in the new configuration block."
::= { agSystem 50 }
agCurCfgTftpServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP port number that the TFTP server is listening to
in the current configuration block."
::= { agSystem 51 }
agNewCfgTftpServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port number that the TFTP server is listening to
in the new configuration block."
::= { agSystem 52 }
agRackId OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rack unique identifier."
::= { agSystem 53 }
agChassis OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis serial number."
::= { agSystem 54 }
agCurTimeZone OBJECT-TYPE
SYNTAX INTEGER {
none(0),
africa-Algeria(1),
africa-Angola(2),
africa-Benin(3),
africa-Botswana(4),
africa-Burkina-Faso(5),
africa-Burundi(6),
africa-Cameroon(7),
africa-Central-African-Rep(8),
africa-Chad(9),
africa-Congo-WestDemRepCongo(10),
africa-Congo-EastDemRepCongo(11),
africa-Congo-Rep(12),
africa-Cote-dIvoire(13),
africa-Djibouti(14),
africa-Egypt(15),
africa-Equatorial-Guinea(16),
africa-Eritrea(17),
africa-Ethiopia(18),
africa-Gabon(19),
africa-Gambia(20),
africa-Ghana(21),
africa-Guinea(22),
africa-Guinea-Bissau(23),
africa-Kenya(24),
africa-Lesotho(25),
africa-Liberia(26),
africa-Libya(27),
africa-Malawi(28),
africa-Mali-SouthWestMali(29),
africa-Mali-NorthEastMali(30),
africa-Mauritania(31),
africa-Morocco(32),
africa-Mozambique(33),
africa-Namibia(34),
africa-Niger(35),
africa-Nigeria(36),
africa-Rwanda(37),
africa-SaoTome-And-Principe(38),
africa-Senegal(39),
africa-SierraLeone(40),
africa-Somalia(41),
africa-SouthAfrica(42),
africa-Spain-Mainland(43),
africa-Spain-CeutaMelilla(44),
africa-Spain-CanaryIslands(45),
africa-Sudan(46),
africa-Swaziland(47),
africa-Tanzania(48),
africa-Togo(49),
africa-Tunisia(50),
africa-Uganda(51),
africa-Western-Sahara(52),
africa-Zambia(53),
africa-Zimbabwe(54),
americas-Anguilla(55),
americas-Antigua-Barbuda(56),
americas-Argentina-EArgentina(57),
americas-Argentina-MostLocations(58),
americas-Argentina-Jujuy(59),
americas-Argentina-Catamarca(60),
americas-Argentina-Mendoza(61),
americas-Aruba(62),
americas-Bahamas(63),
americas-Barbados(64),
americas-Belize(65),
americas-Bolivia(66),
americas-Brazil-AtlanticIslands(67),
americas-Brazil-AmapaEPara(68),
americas-Brazil-NEBrazil(69),
americas-Brazil-Pernambuco(70),
americas-Brazil-Tocantins(71),
americas-Brazil-AlagoasSergipe(72),
americas-Brazil-SSEBrazil(73),
americas-Brazil-MatoGrossoDoSul(74),
americas-Brazil-WParaRondonia(75),
americas-Brazil-Roraima(76),
americas-Brazil-EAmazonas(77),
americas-Brazil-WAmazonas(78),
americas-Brazil-Acre(79),
americas-Canada-NewfoundlandIsland(80),
americas-Canada-AtlanTime-NovaScotia(81),
americas-Canada-AtlanTime-ELabrador(82),
americas-Canada-EastTime-OntarioMostlocation(83),
americas-Canada-EastTime-ThunderBay(84),
americas-Canada-EastStdTime-PangnirtungNunavut(85),
americas-Canada-EastStdTime-EastNunavut(86),
americas-Canada-EastStdTime-CenNunavut(87),
americas-Canada-CenTime-ManitobaWestOntario(88),
americas-Canada-CenTime-RainyRiver(89),
americas-Canada-CenTime-WestNunavut(90),
americas-Canada-CenStdTime-SaskatchewanMostlocation(91),
americas-Canada-CenStdTime-SaskatchewanMidwest(92),
americas-Canada-MountTime-AlbertaEastBritishColumbia(93),
americas-Canada-MountTime-CentralNorthwestTerritories(94),
americas-Canada-MountTime-WestNorthwestTerritories(95),
americas-Canada-MountStdTime-DawsonCrkStJohnBritColumbia(96),
americas-Canada-PacificTime-WestBritishColumbia(97),
americas-Canada-PacificTime-SouthYukon(98),
americas-Canada-PacificTime-NorthYukon(99),
americas-CaymanIslands(100),
americas-Chile-MostLocation(101),
americas-Chile-EasterIsland(102),
americas-Colombia(103),
americas-CostaRica(104),
americas-Cuba(105),
americas-Dominica(106),
americas-DominicanRepublic (107),
americas-Ecuador(108),
americas-ElSalvado(109),
americas-FrenchGuiana(110),
americas-Greenland-MostLocation(111),
americas-Greenland-EastCoastNorthScoresbysund(112),
americas-Greenland-ScoresbysundIttoqqortoormiit(113),
americas-Greenland-ThulePituffik(114),
americas-Grenada(115),
americas-Guadeloupe(116),
americas-Guatemala(117),
americas-Guyana(118),
americas-Haiti(119),
americas-Honduras(120),
americas-Jamaica(121),
americas-Martinique(122),
americas-Mexico-CentTime-Mostlocations(123),
americas-Mexico-CentTime-QuintanaRoo(124),
americas-Mexico-CentTime-CampecheYucatan(125),
americas-Mexico-CentTime-CoahuilaDurNuevoLeonTam(126),
americas-Mexico-MountTime-SBajaNayaritSinaloa(127),
americas-Mexico-MountTime-Chihuahua(128),
americas-Mexico-MountStdTime-Sonora(129),
americas-Mexico-PacificTime(130),
americas-Montserrat(131),
americas-NetherlandsAntilles(132),
americas-Nicaragua(133),
americas-Panama(134),
americas-Paraguay(135),
americas-Peru(136),
americas-PuertoRico(137),
americas-StKittsAndNevis(138),
americas-StLucia(139),
americas-StPierreAndMiquelon(140),
americas-StVincent(141),
americas-Suriname(142),
americas-TrinidadAndTobago(143),
americas-TurksAndCaicosIs(144),
americas-USA-EastTime(145),
americas-USA-EastTime-MichiganMostLocation(146),
americas-USA-EastTime-KentuckyLouisvilleArea(147),
americas-USA-EastTime-KentuckyWayneCounty(148),
americas-USA-EastStdTime-IndianaMostLocations(149),
americas-USA-EastStdTime-IndianaCrawfordCounty(150),
americas-USA-EastStdTime-IndianaStarkeCounty(151),
americas-USA-EastStdTime-IndianaSwitzerlandCounty(152),
americas-USA-CentTime(153),
americas-USA-CentTime-MichiganWisconsinborder(154),
americas-USA-CentTime-NorthDakotaOliverCounty(155),
americas-USA-MountTime(156),
americas-USA-MountTime-SouthIdahoAndEastOregon(157),
americas-USA-MountTime-Navajo(158),
americas-USA-MountStdTime-Arizona(159),
americas-USA-PacificTime(160),
americas-USA-AlaskaTime(161),
americas-USA-AlaskaTime-AlaskaPanhandle(162),
americas-USA-AlaskaTime-AlaskaPanhandleNeck(163),
americas-USA-AlaskaTime-WestAlaska(164),
americas-USA-AleutianIslands(165),
americas-USA-Hawaii(166),
americas-Uruguay(167),
americas-Venezuela(168),
americas-VirginIslands-UK(169),
americas-VirginIslands-US(170),
antarctica-McMurdoStationRossIsland(171),
antarctica-Amundsen-ScottStationSouthPole(172),
antarctica-PalmerStationAnversIsland(173),
antarctica-MawsonStationHolmeBay(174),
antarctica-DavisStationVestfoldHills(175),
antarctica-CaseyStationBaileyPeninsula(176),
antarctica-VostokStationSMagneticPole(177),
antarctica-Dumont-dUrvilleBaseTerreAdelie(178),
antarctica-SyowaStationEOngulI(179),
arcticOcean-Svalbard(180),
arcticOcean-JanMayen(181),
asia-Afghanistan(182),
asia-Armenia(183),
asia-Azerbaijan(184),
asia-Bahrain(185),
asia-Bangladesh(186),
asia-Bhutan(187),
asia-Brunei(188),
asia-Cambodia(189),
asia-China-EastChinaBeijingGuangdongShanghai(190),
asia-China-Heilongjiang(191),
asia-China-CentralChinaGansuGuizhouSichuanYunnan(192),
asia-China-TibetmostofXinjiangUyghur(193),
asia-China-SouthwestXinjiangUyghur(194),
asia-Cyprus(195),
asia-EastTimor(196),
asia-Georgia(197),
asia-HongKong(198),
asia-India(199),
asia-Indonesia-JavaAndSumatra(200),
asia-Indonesia-WestCentralBorneo(201),
asia-Indonesia-ESBorneoCelebesBaliNusaTengaWTimor(202),
asia-Indonesia-IrianJayaAndMoluccas(203),
asia-Iran(204),
asia-Iraq(205),
asia-Israel(206),
asia-Japan(207),
asia-Jordan(208),
asia-Kazakhstan-MostLocations(209),
asia-Kazakhstan-QyzylordaKyzylorda(210),
asia-Kazakhstan-Aqtobe(211),
asia-Kazakhstan-AtyrauMangghystau(212),
asia-Kazakhstan-WestKazakhstan(213),
asia-Korea-North(214),
asia-Korea-South(215),
asia-Kuwait(216),
asia-Kyrgyzstan(217),
asia-Laos(218),
asia-Lebanon(219),
asia-Macau(220),
asia-Malaysia-PeninsularMalaysia(221),
asia-Malaysia-SabahSarawak(222),
asia-Mongolia-MostLocations(223),
asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan(224),
asia-Mongolia-DornodSukhbaatar(225),
asia-Myanmar(226),
asia-Nepal(227),
asia-Oman(228),
asia-Pakistan(229),
asia-Palestine(230),
asia-Philippines(231),
asia-Qatar(232),
asia-Russia-Moscow-01Kaliningrad(233),
asia-Russia-Moscow00WestRussia(234),
asia-Russia-Moscow01CaspianSea(235),
asia-Russia-Moscow02Urals(236),
asia-Russia-Moscow03WestSiberia(237),
asia-Russia-Moscow03Novosibirsk(238),
asia-Russia-Moscow04YeniseiRiver(239),
asia-Russia-Moscow05LakeBaikal(240),
asia-Russia-Moscow06LenaRiver(241),
asia-Russia-Moscow07AmurRiver(242),
asia-Russia-Moscow07SakhalinIsland(243),
asia-Russia-Moscow08Magadan(244),
asia-Russia-Moscow09Kamchatka(245),
asia-Russia-Moscow10BeringSea(246),
asia-SaudiArabia(247),
asia-Singapore(248),
asia-SriLanka(249),
asia-Syria(250),
asia-Taiwan(251),
asia-Tajikistan(252),
asia-Thailand(253),
asia-Turkmenistan(254),
asia-UnitedArabEmirates(255),
asia-Uzbekistan-WestUzbekistan(256),
asia-Uzbekistan-EastUzbekistan(257),
asia-Vietnam(258),
asia-Yemen(259),
atlanticOcean-Bermuda(260),
atlanticOcean-CapeVerde(261),
atlanticOcean-FaeroeIslands(262),
atlanticOcean-FalklandIslands(263),
atlanticOcean-Iceland(264),
atlanticOcean-Portugal-Mainland(265),
atlanticOcean-Portugal-MadeiraIslands(266),
atlanticOcean-Portugal-Azores(267),
atlanticOcean-SouthGeorgia-SouthSandwichIslands(268),
atlanticOcean-Spain-Mainland(269),
atlanticOcean-Spain-CeutaMelilla(270),
atlanticOcean-Spain-CanaryIslands(271),
atlanticOcean-StHelena(272),
atlanticOcean-Svalbard-JanMayen(273),
australia-LordHoweIsland(274),
australia-Tasmania(275),
australia-Victoria(276),
australia-NewSouthWales-MostLocations(277),
australia-NewSouthWales-Yancowinna(278),
australia-Queensland-MostLocations(279),
australia-Queensland-HolidayIslands(280),
australia-SouthAustralia(281),
australia-NorthernTerritory(282),
australia-WesternAustralia(283),
europe-Albania(284),
europe-Andorra(285),
europe-Austria(286),
europe-Belarus(287),
europe-Belgium(288),
europe-BosniaHerzegovina(289),
europe-Britain-UKGreatBritain(290),
europe-Britain-UKNorthernIreland(291),
europe-Bulgaria(292),
europe-Croatia(293),
europe-CzechRepublic(294),
europe-Denmark(295),
europe-Estonia(296),
europe-Finland(297),
europe-France(298),
europe-Germany(299),
europe-Gibraltar(300),
europe-Greece(301),
europe-Hungary(302),
europe-Ireland(303),
europe-Italy(304),
europe-Latvia(305),
europe-Liechtenstein(306),
europe-Lithuania(307),
europe-Luxembourg(308),
europe-Macedonia(309),
europe-Malta(310),
europe-Moldova(311),
europe-Monaco(312),
europe-Montenegro(421),
europe-Netherlands(313),
europe-Norway(314),
europe-Poland(315),
europe-Portugal-Mainland(316),
europe-Portugal-MadeiraIslands(317),
europe-Portugal-Azores(318),
europe-Romania(319),
europe-Russia-Moscow-01Kaliningrad(320),
europe-Russia-Moscow00WestRussia(321),
europe-Russia-Moscow01CaspianSea(322),
europe-Russia-Moscow02Urals(323),
europe-Russia-Moscow03WestSiberia(324),
europe-Russia-Moscow03Novosibirsk(325),
europe-Russia-Moscow04YeniseiRiver(326),
europe-Russia-Moscow05LakeBaikal(327),
europe-Russia-Moscow06LenaRiver(328),
europe-Russia-Moscow07AmurRiver(329),
europe-Russia-Moscow07SakhalinIsland(330),
europe-Russia-Moscow08Magadan(331),
europe-Russia-Moscow09Kamchatka(332),
europe-Russia-Moscow10BeringSea(333),
europe-SanMarino(334),
europe-Serbia(348),
europe-Slovakia(335),
europe-Slovenia(336),
europe-Spain-Mainland(337),
europe-Spain-CeutaAndMelilla(338),
europe-Spain-CanaryIslands(339),
europe-Sweden(340),
europe-Switzerland(341),
europe-Turkey(342),
europe-Ukraine-MostLocations(343),
europe-Ukraine-Ruthenia(344),
europe-Ukraine-Zaporozhye-ELugansk(345),
europe-Ukraine-CentralCrimea(346),
europe-VaticanCity(347),
indianOcean-BritishIndianOceanTerritory(349),
indianOcean-ChristmasIsland(350),
indianOcean-CocosOrKeelingIslands(351),
indianOcean-Comoros(352),
indianOcean-FrenchSouthernAndAntarcticLands(353),
indianOcean-Madagascar(354),
indianOcean-Maldives(355),
indianOcean-Mauritius(356),
indianOcean-Mayotte(357),
indianOcean-Reunion(358),
indianOcean-Seychelles(359),
pacificOcean-Chile-MostLocations(360),
pacificOcean-Chile-EasterIslandSalayGomez(361),
pacificOcean-CookIslands(362),
pacificOcean-Ecuador(363),
pacificOcean-Fiji(364),
pacificOcean-FrenchPolynesia-SocietyIslands(365),
pacificOcean-FrenchPolynesia-MarquesasIslands(366),
pacificOcean-FrenchPolynesia-GambierIslands(367),
pacificOcean-Guam(368),
pacificOcean-Kiribati-GilbertIslands(369),
pacificOcean-Kiribati-PhoenixIslands(370),
pacificOcean-Kiribati-LineIslands(371),
pacificOcean-MarshallIslands-MostLocations(372),
pacificOcean-MarshallIslands-Kwajalein(373),
pacificOcean-Micronesia-Yap(374),
pacificOcean-Micronesia-TrukOrChuuk(375),
pacificOcean-Micronesia-PonapeOrPohnpei(376),
pacificOcean-Micronesia-Kosrae(377),
pacificOcean-Nauru(378),
pacificOcean-NewCaledonia(379),
pacificOcean-NewZealand-MostLocations(380),
pacificOcean-NewZealand-ChathamIslands(381),
pacificOcean-Niue(382),
pacificOcean-NorfolkIsland(383),
pacificOcean-NorthernMarianaIslands(384),
pacificOcean-Palau(385),
pacificOcean-PapuaNewGuinea(386),
pacificOcean-Pitcairn(387),
pacificOcean-SamoaAmerican(388),
pacificOcean-SamoaWestern(389),
pacificOcean-SolomonIslands(390),
pacificOcean-Tokelau(391),
pacificOcean-Tonga(392),
pacificOcean-Tuvalu(393),
pacificOceanUSA-EastTime(394),
pacificOceanUSA-EastTime-MichiganMostLocations(395),
pacificOceanUSA-EastTime-KentuckyLouisvilleArea(396),
pacificOceanUSA-EastTime-KentuckyWayneCounty(397),
pacificOceanUSA-EastStdTime-IndianaMostLocations(398),
pacificOceanUSA-EastStdTime-IndianaCrawfordCounty(399),
pacificOceanUSA-EastStdTime-IndianaStarkeCounty(400),
pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty(401),
pacificOceanUSA-CentTime(402),
pacificOceanUSA-CentTime-MichiganWisconsinborder(403),
pacificOceanUSA-CentTime-NorthDakotaOliverCounty(404),
pacificOceanUSA-MountTime(405),
pacificOceanUSA-MountTime-SouthIdahoAndEastOregon(406),
pacificOceanUSA-MountTime-Navajo(407),
pacificOceanUSA-MountStdTime-Arizona(408),
pacificOceanUSA-PacificTime(409),
pacificOceanUSA-AlaskaTime(410),
pacificOceanUSA-AlaskaTime-AlaskaPanhandle(411),
pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck(412),
pacificOceanUSA-AlaskaTime-WestAlaska(413),
pacificOceanUSA-AleutianIslands(414),
pacificOceanUSA-Hawaii(415),
pacificOcean-USMinorOutlyingIslands-JohnstonAtoll(416),
pacificOcean-USMinorOutlyingIslands-MidwayIslands(417),
pacificOcean-USMinorOutlyingIslands-WakeIsland(418),
pacificOcean-Vanuatu(419),
pacificOcean-WallisAndFutuna(420)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time zone.
Note: Locations are alphabetically ordered and
the corresponding code is not reflected in CLI."
::= { agSystem 55 }
agNewTimeZone OBJECT-TYPE
SYNTAX INTEGER {
none(0),
africa-Algeria(1),
africa-Angola(2),
africa-Benin(3),
africa-Botswana(4),
africa-Burkina-Faso(5),
africa-Burundi(6),
africa-Cameroon(7),
africa-Central-African-Rep(8),
africa-Chad(9),
africa-Congo-WestDemRepCongo(10),
africa-Congo-EastDemRepCongo(11),
africa-Congo-Rep(12),
africa-Cote-dIvoire(13),
africa-Djibouti(14),
africa-Egypt(15),
africa-Equatorial-Guinea(16),
africa-Eritrea(17),
africa-Ethiopia(18),
africa-Gabon(19),
africa-Gambia(20),
africa-Ghana(21),
africa-Guinea(22),
africa-Guinea-Bissau(23),
africa-Kenya(24),
africa-Lesotho(25),
africa-Liberia(26),
africa-Libya(27),
africa-Malawi(28),
africa-Mali-SouthWestMali(29),
africa-Mali-NorthEastMali(30),
africa-Mauritania(31),
africa-Morocco(32),
africa-Mozambique(33),
africa-Namibia(34),
africa-Niger(35),
africa-Nigeria(36),
africa-Rwanda(37),
africa-SaoTome-And-Principe(38),
africa-Senegal(39),
africa-SierraLeone(40),
africa-Somalia(41),
africa-SouthAfrica(42),
africa-Spain-Mainland(43),
africa-Spain-CeutaMelilla(44),
africa-Spain-CanaryIslands(45),
africa-Sudan(46),
africa-Swaziland(47),
africa-Tanzania(48),
africa-Togo(49),
africa-Tunisia(50),
africa-Uganda(51),
africa-Western-Sahara(52),
africa-Zambia(53),
africa-Zimbabwe(54),
americas-Anguilla(55),
americas-Antigua-Barbuda(56),
americas-Argentina-EArgentina(57),
americas-Argentina-MostLocations(58),
americas-Argentina-Jujuy(59),
americas-Argentina-Catamarca(60),
americas-Argentina-Mendoza(61),
americas-Aruba(62),
americas-Bahamas(63),
americas-Barbados(64),
americas-Belize(65),
americas-Bolivia(66),
americas-Brazil-AtlanticIslands(67),
americas-Brazil-AmapaEPara(68),
americas-Brazil-NEBrazil(69),
americas-Brazil-Pernambuco(70),
americas-Brazil-Tocantins(71),
americas-Brazil-AlagoasSergipe(72),
americas-Brazil-SSEBrazil(73),
americas-Brazil-MatoGrossoDoSul(74),
americas-Brazil-WParaRondonia(75),
americas-Brazil-Roraima(76),
americas-Brazil-EAmazonas(77),
americas-Brazil-WAmazonas(78),
americas-Brazil-Acre(79),
americas-Canada-NewfoundlandIsland(80),
americas-Canada-AtlanTime-NovaScotia(81),
americas-Canada-AtlanTime-ELabrador(82),
americas-Canada-EastTime-OntarioMostlocation(83),
americas-Canada-EastTime-ThunderBay(84),
americas-Canada-EastStdTime-PangnirtungNunavut(85),
americas-Canada-EastStdTime-EastNunavut(86),
americas-Canada-EastStdTime-CenNunavut(87),
americas-Canada-CenTime-ManitobaWestOntario(88),
americas-Canada-CenTime-RainyRiver(89),
americas-Canada-CenTime-WestNunavut(90),
americas-Canada-CenStdTime-SaskatchewanMostlocation(91),
americas-Canada-CenStdTime-SaskatchewanMidwest(92),
americas-Canada-MountTime-AlbertaEastBritishColumbia(93),
americas-Canada-MountTime-CentralNorthwestTerritories(94),
americas-Canada-MountTime-WestNorthwestTerritories(95),
americas-Canada-MountStdTime-DawsonCrkStJohnBritColumbia(96),
americas-Canada-PacificTime-WestBritishColumbia(97),
americas-Canada-PacificTime-SouthYukon(98),
americas-Canada-PacificTime-NorthYukon(99),
americas-CaymanIslands(100),
americas-Chile-MostLocation(101),
americas-Chile-EasterIsland(102),
americas-Colombia(103),
americas-CostaRica(104),
americas-Cuba(105),
americas-Dominica(106),
americas-DominicanRepublic (107),
americas-Ecuador(108),
americas-ElSalvado(109),
americas-FrenchGuiana(110),
americas-Greenland-MostLocation(111),
americas-Greenland-EastCoastNorthScoresbysund(112),
americas-Greenland-ScoresbysundIttoqqortoormiit(113),
americas-Greenland-ThulePituffik(114),
americas-Grenada(115),
americas-Guadeloupe(116),
americas-Guatemala(117),
americas-Guyana(118),
americas-Haiti(119),
americas-Honduras(120),
americas-Jamaica(121),
americas-Martinique(122),
americas-Mexico-CentTime-Mostlocations(123),
americas-Mexico-CentTime-QuintanaRoo(124),
americas-Mexico-CentTime-CampecheYucatan(125),
americas-Mexico-CentTime-CoahuilaDurNuevoLeonTam(126),
americas-Mexico-MountTime-SBajaNayaritSinaloa(127),
americas-Mexico-MountTime-Chihuahua(128),
americas-Mexico-MountStdTime-Sonora(129),
americas-Mexico-PacificTime(130),
americas-Montserrat(131),
americas-NetherlandsAntilles(132),
americas-Nicaragua(133),
americas-Panama(134),
americas-Paraguay(135),
americas-Peru(136),
americas-PuertoRico(137),
americas-StKittsAndNevis(138),
americas-StLucia(139),
americas-StPierreAndMiquelon(140),
americas-StVincent(141),
americas-Suriname(142),
americas-TrinidadAndTobago(143),
americas-TurksAndCaicosIs(144),
americas-USA-EastTime(145),
americas-USA-EastTime-MichiganMostLocation(146),
americas-USA-EastTime-KentuckyLouisvilleArea(147),
americas-USA-EastTime-KentuckyWayneCounty(148),
americas-USA-EastStdTime-IndianaMostLocations(149),
americas-USA-EastStdTime-IndianaCrawfordCounty(150),
americas-USA-EastStdTime-IndianaStarkeCounty(151),
americas-USA-EastStdTime-IndianaSwitzerlandCounty(152),
americas-USA-CentTime(153),
americas-USA-CentTime-MichiganWisconsinborder(154),
americas-USA-CentTime-NorthDakotaOliverCounty(155),
americas-USA-MountTime(156),
americas-USA-MountTime-SouthIdahoAndEastOregon(157),
americas-USA-MountTime-Navajo(158),
americas-USA-MountStdTime-Arizona(159),
americas-USA-PacificTime(160),
americas-USA-AlaskaTime(161),
americas-USA-AlaskaTime-AlaskaPanhandle(162),
americas-USA-AlaskaTime-AlaskaPanhandleNeck(163),
americas-USA-AlaskaTime-WestAlaska(164),
americas-USA-AleutianIslands(165),
americas-USA-Hawaii(166),
americas-Uruguay(167),
americas-Venezuela(168),
americas-VirginIslands-UK(169),
americas-VirginIslands-US(170),
antarctica-McMurdoStationRossIsland(171),
antarctica-Amundsen-ScottStationSouthPole(172),
antarctica-PalmerStationAnversIsland(173),
antarctica-MawsonStationHolmeBay(174),
antarctica-DavisStationVestfoldHills(175),
antarctica-CaseyStationBaileyPeninsula(176),
antarctica-VostokStationSMagneticPole(177),
antarctica-Dumont-dUrvilleBaseTerreAdelie(178),
antarctica-SyowaStationEOngulI(179),
arcticOcean-Svalbard(180),
arcticOcean-JanMayen(181),
asia-Afghanistan(182),
asia-Armenia(183),
asia-Azerbaijan(184),
asia-Bahrain(185),
asia-Bangladesh(186),
asia-Bhutan(187),
asia-Brunei(188),
asia-Cambodia(189),
asia-China-EastChinaBeijingGuangdongShanghai(190),
asia-China-Heilongjiang(191),
asia-China-CentralChinaGansuGuizhouSichuanYunnan(192),
asia-China-TibetmostofXinjiangUyghur(193),
asia-China-SouthwestXinjiangUyghur(194),
asia-Cyprus(195),
asia-EastTimor(196),
asia-Georgia(197),
asia-HongKong(198),
asia-India(199),
asia-Indonesia-JavaAndSumatra(200),
asia-Indonesia-WestCentralBorneo(201),
asia-Indonesia-ESBorneoCelebesBaliNusaTengaWTimor(202),
asia-Indonesia-IrianJayaAndMoluccas(203),
asia-Iran(204),
asia-Iraq(205),
asia-Israel(206),
asia-Japan(207),
asia-Jordan(208),
asia-Kazakhstan-MostLocations(209),
asia-Kazakhstan-QyzylordaKyzylorda(210),
asia-Kazakhstan-Aqtobe(211),
asia-Kazakhstan-AtyrauMangghystau(212),
asia-Kazakhstan-WestKazakhstan(213),
asia-Korea-North(214),
asia-Korea-South(215),
asia-Kuwait(216),
asia-Kyrgyzstan(217),
asia-Laos(218),
asia-Lebanon(219),
asia-Macau(220),
asia-Malaysia-PeninsularMalaysia(221),
asia-Malaysia-SabahSarawak(222),
asia-Mongolia-MostLocations(223),
asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan(224),
asia-Mongolia-DornodSukhbaatar(225),
asia-Myanmar(226),
asia-Nepal(227),
asia-Oman(228),
asia-Pakistan(229),
asia-Palestine(230),
asia-Philippines(231),
asia-Qatar(232),
asia-Russia-Moscow-01Kaliningrad(233),
asia-Russia-Moscow00WestRussia(234),
asia-Russia-Moscow01CaspianSea(235),
asia-Russia-Moscow02Urals(236),
asia-Russia-Moscow03WestSiberia(237),
asia-Russia-Moscow03Novosibirsk(238),
asia-Russia-Moscow04YeniseiRiver(239),
asia-Russia-Moscow05LakeBaikal(240),
asia-Russia-Moscow06LenaRiver(241),
asia-Russia-Moscow07AmurRiver(242),
asia-Russia-Moscow07SakhalinIsland(243),
asia-Russia-Moscow08Magadan(244),
asia-Russia-Moscow09Kamchatka(245),
asia-Russia-Moscow10BeringSea(246),
asia-SaudiArabia(247),
asia-Singapore(248),
asia-SriLanka(249),
asia-Syria(250),
asia-Taiwan(251),
asia-Tajikistan(252),
asia-Thailand(253),
asia-Turkmenistan(254),
asia-UnitedArabEmirates(255),
asia-Uzbekistan-WestUzbekistan(256),
asia-Uzbekistan-EastUzbekistan(257),
asia-Vietnam(258),
asia-Yemen(259),
atlanticOcean-Bermuda(260),
atlanticOcean-CapeVerde(261),
atlanticOcean-FaeroeIslands(262),
atlanticOcean-FalklandIslands(263),
atlanticOcean-Iceland(264),
atlanticOcean-Portugal-Mainland(265),
atlanticOcean-Portugal-MadeiraIslands(266),
atlanticOcean-Portugal-Azores(267),
atlanticOcean-SouthGeorgia-SouthSandwichIslands(268),
atlanticOcean-Spain-Mainland(269),
atlanticOcean-Spain-CeutaMelilla(270),
atlanticOcean-Spain-CanaryIslands(271),
atlanticOcean-StHelena(272),
atlanticOcean-Svalbard-JanMayen(273),
australia-LordHoweIsland(274),
australia-Tasmania(275),
australia-Victoria(276),
australia-NewSouthWales-MostLocations(277),
australia-NewSouthWales-Yancowinna(278),
australia-Queensland-MostLocations(279),
australia-Queensland-HolidayIslands(280),
australia-SouthAustralia(281),
australia-NorthernTerritory(282),
australia-WesternAustralia(283),
europe-Albania(284),
europe-Andorra(285),
europe-Austria(286),
europe-Belarus(287),
europe-Belgium(288),
europe-BosniaHerzegovina(289),
europe-Britain-UKGreatBritain(290),
europe-Britain-UKNorthernIreland(291),
europe-Bulgaria(292),
europe-Croatia(293),
europe-CzechRepublic(294),
europe-Denmark(295),
europe-Estonia(296),
europe-Finland(297),
europe-France(298),
europe-Germany(299),
europe-Gibraltar(300),
europe-Greece(301),
europe-Hungary(302),
europe-Ireland(303),
europe-Italy(304),
europe-Latvia(305),
europe-Liechtenstein(306),
europe-Lithuania(307),
europe-Luxembourg(308),
europe-Macedonia(309),
europe-Malta(310),
europe-Moldova(311),
europe-Monaco(312),
europe-Montenegro(421),
europe-Netherlands(313),
europe-Norway(314),
europe-Poland(315),
europe-Portugal-Mainland(316),
europe-Portugal-MadeiraIslands(317),
europe-Portugal-Azores(318),
europe-Romania(319),
europe-Russia-Moscow-01Kaliningrad(320),
europe-Russia-Moscow00WestRussia(321),
europe-Russia-Moscow01CaspianSea(322),
europe-Russia-Moscow02Urals(323),
europe-Russia-Moscow03WestSiberia(324),
europe-Russia-Moscow03Novosibirsk(325),
europe-Russia-Moscow04YeniseiRiver(326),
europe-Russia-Moscow05LakeBaikal(327),
europe-Russia-Moscow06LenaRiver(328),
europe-Russia-Moscow07AmurRiver(329),
europe-Russia-Moscow07SakhalinIsland(330),
europe-Russia-Moscow08Magadan(331),
europe-Russia-Moscow09Kamchatka(332),
europe-Russia-Moscow10BeringSea(333),
europe-SanMarino(334),
europe-Serbia(348),
europe-Slovakia(335),
europe-Slovenia(336),
europe-Spain-Mainland(337),
europe-Spain-CeutaAndMelilla(338),
europe-Spain-CanaryIslands(339),
europe-Sweden(340),
europe-Switzerland(341),
europe-Turkey(342),
europe-Ukraine-MostLocations(343),
europe-Ukraine-Ruthenia(344),
europe-Ukraine-Zaporozhye-ELugansk(345),
europe-Ukraine-CentralCrimea(346),
europe-VaticanCity(347),
indianOcean-BritishIndianOceanTerritory(349),
indianOcean-ChristmasIsland(350),
indianOcean-CocosOrKeelingIslands(351),
indianOcean-Comoros(352),
indianOcean-FrenchSouthernAndAntarcticLands(353),
indianOcean-Madagascar(354),
indianOcean-Maldives(355),
indianOcean-Mauritius(356),
indianOcean-Mayotte(357),
indianOcean-Reunion(358),
indianOcean-Seychelles(359),
pacificOcean-Chile-MostLocations(360),
pacificOcean-Chile-EasterIslandSalayGomez(361),
pacificOcean-CookIslands(362),
pacificOcean-Ecuador(363),
pacificOcean-Fiji(364),
pacificOcean-FrenchPolynesia-SocietyIslands(365),
pacificOcean-FrenchPolynesia-MarquesasIslands(366),
pacificOcean-FrenchPolynesia-GambierIslands(367),
pacificOcean-Guam(368),
pacificOcean-Kiribati-GilbertIslands(369),
pacificOcean-Kiribati-PhoenixIslands(370),
pacificOcean-Kiribati-LineIslands(371),
pacificOcean-MarshallIslands-MostLocations(372),
pacificOcean-MarshallIslands-Kwajalein(373),
pacificOcean-Micronesia-Yap(374),
pacificOcean-Micronesia-TrukOrChuuk(375),
pacificOcean-Micronesia-PonapeOrPohnpei(376),
pacificOcean-Micronesia-Kosrae(377),
pacificOcean-Nauru(378),
pacificOcean-NewCaledonia(379),
pacificOcean-NewZealand-MostLocations(380),
pacificOcean-NewZealand-ChathamIslands(381),
pacificOcean-Niue(382),
pacificOcean-NorfolkIsland(383),
pacificOcean-NorthernMarianaIslands(384),
pacificOcean-Palau(385),
pacificOcean-PapuaNewGuinea(386),
pacificOcean-Pitcairn(387),
pacificOcean-SamoaAmerican(388),
pacificOcean-SamoaWestern(389),
pacificOcean-SolomonIslands(390),
pacificOcean-Tokelau(391),
pacificOcean-Tonga(392),
pacificOcean-Tuvalu(393),
pacificOceanUSA-EastTime(394),
pacificOceanUSA-EastTime-MichiganMostLocations(395),
pacificOceanUSA-EastTime-KentuckyLouisvilleArea(396),
pacificOceanUSA-EastTime-KentuckyWayneCounty(397),
pacificOceanUSA-EastStdTime-IndianaMostLocations(398),
pacificOceanUSA-EastStdTime-IndianaCrawfordCounty(399),
pacificOceanUSA-EastStdTime-IndianaStarkeCounty(400),
pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty(401),
pacificOceanUSA-CentTime(402),
pacificOceanUSA-CentTime-MichiganWisconsinborder(403),
pacificOceanUSA-CentTime-NorthDakotaOliverCounty(404),
pacificOceanUSA-MountTime(405),
pacificOceanUSA-MountTime-SouthIdahoAndEastOregon(406),
pacificOceanUSA-MountTime-Navajo(407),
pacificOceanUSA-MountStdTime-Arizona(408),
pacificOceanUSA-PacificTime(409),
pacificOceanUSA-AlaskaTime(410),
pacificOceanUSA-AlaskaTime-AlaskaPanhandle(411),
pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck(412),
pacificOceanUSA-AlaskaTime-WestAlaska(413),
pacificOceanUSA-AleutianIslands(414),
pacificOceanUSA-Hawaii(415),
pacificOcean-USMinorOutlyingIslands-JohnstonAtoll(416),
pacificOcean-USMinorOutlyingIslands-MidwayIslands(417),
pacificOcean-USMinorOutlyingIslands-WakeIsland(418),
pacificOcean-Vanuatu(419),
pacificOceanWallisAndFutuna(420)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time zone.
Note: Locations are alphabetically ordered and
the corresponding code is not reflected in CLI."
::= { agSystem 56 }
agCurCfgIdleCLITimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set idle CLI sessions timeout."
::= { agSystem 57 }
agNewCfgIdleCLITimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set idle CLI sessions timeout."
::= { agSystem 58 }
-- Auto-Discovery topology table info
agCurCfgHttpsServerAccess OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current HTTPS server access state."
::= { agSystem 62 }
agNewCfgHttpsServerAccess OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable HTTPS server access."
::= { agSystem 63 }
agCurHttpAcces OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current HTTP server access state."
::= { agSystem 66 }
agNewHttpAcces OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New HTTP server access state."
::= { agSystem 67 }
agCurCfgHprompt OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of hprompt."
::= { agSystem 72 }
agNewCfgHprompt OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New status of hprompt."
::= { agSystem 73 }
agCurCfgUserBBI OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of user configuration from BBI."
::= { agSystem 74 }
agNewCfgUserBBI OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New status of user configuration from BBI."
::= { agSystem 75 }
agCurCfgSysCustomDstState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of Custom DST"
::= { agSystem 98 }
agNewCfgSysCustomDstState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable Custom DST"
::= { agSystem 99 }
agCurCfgSysCustomDstStart OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current Custom DST start rule"
::= { agSystem 100 }
agNewCfgSysCustomDstStart OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Custom DST start rule"
::= { agSystem 101 }
agCurCfgSysCustomDstEnd OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Custom DST end rule"
::= { agSystem 102}
agNewCfgSysCustomDstEnd OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Custom DST end rule"
::= { agSystem 103 }
agHavePanicDump OBJECT-TYPE
SYNTAX INTEGER {
havePanic(1),
noHavePanic(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The presence of a panic dump in the flash memory."
::= { agSystem 104 }
agCurCfgResetControl OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current reset control state."
::= { agSystem 111 }
agNewCfgResetControl OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable reset control after panic."
::= { agSystem 112 }
agCurCfgSysDlight OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current daylight savings time status."
::= { agSystem 113 }
agNewCfgSysDlight OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable daylight savings time."
::= { agSystem 114 }
agCurCfgErrDisableRecovery OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the system will automatically
re-enable an error-disabled port after the time interval
indicated by agCurCfgErrDisableTimeout has elapsed. A port
is in error-disabled state when it has been operationally
disabled due to abnormal conditions detected on the port.
An error-disabled port will only be automatically re-enabled
by the system if and only if this object and the port's
agPortCurCfgErrDisableRecovery object both have a value of
'enable(1)'."
DEFVAL { disable }
::= { agSystem 115 }
agNewCfgErrDisableRecovery OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the system should automatically
re-enable an error-disabled port. Use this object to change
the global setting of the error-disable recovery action."
DEFVAL { disable }
::= { agSystem 116 }
agCurCfgErrDisableTimeout OBJECT-TYPE
SYNTAX INTEGER (30 .. 86400)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time, in seconds, that the system
will wait before it automatically re-enables any port that
is in error-disabled state."
DEFVAL { 300 }
::= { agSystem 117 }
agNewCfgErrDisableTimeout OBJECT-TYPE
SYNTAX INTEGER (30 .. 86400)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the time, in seconds, that the system
should wait before it automatically re-enables a port that
is in error-disabled state. Use this object to change the
global error-disable timeout value."
DEFVAL { 300 }
::= { agSystem 118 }
agCurCfgTelnetAccess OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current telnet access state."
::= { agSystem 119 }
agNewCfgTelnetAccess OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable telnet access."
::= { agSystem 120 }
agCurCfgDcbx OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current DCBX state."
::= { agSystem 121 }
agNewCfgDcbx OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable DCBX feature."
::= { agSystem 122 }
agCurCfgDhcpMgta OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the use of DHCP mgta, as configured
in the current configuration block."
::= { agSystem 123 }
agNewCfgDhcpMgta OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the use of DHCP mgta, in the new configuration block."
::= { agSystem 124 }
agCurCfgDhcpMgtb OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the use of DHCP mgtb, as configured in the
current configuration block."
::= { agSystem 125 }
agNewCfgDhcpMgtb OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the use of DHCP mgtb, in the new configuration block."
::= { agSystem 126 }
serverPortsCurCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current configured server port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the server ports list
0 - The represented port does not belong to the server ports list"
::= { agSystem 127 }
serverPortsNewCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"New configuration server port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the server ports list
0 - The represented port does not belong to the server ports list"
::= { agSystem 128 }
serverPortsNewCfgAddPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be added to the server ports list. A '0' value is
returned when read."
::= {agSystem 129 }
serverPortsNewCfgRemovePort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be removed from the server ports list. A '0' value is
returned when read."
::= { agSystem 130 }
agCurBootProfile OBJECT-TYPE
SYNTAX INTEGER {
default(0)
,routing(1)
,aggregate(2)
,hft(3)
,ipv6(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Profile that will be used by the switch after reset"
::= { agSystem 131 }
agNewBootProfile OBJECT-TYPE
SYNTAX INTEGER {
default(0)
,routing(1)
,aggregate(2)
,hft(3)
,ipv6(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the profile that will be used by the switch after reset"
::= { agSystem 132 }
agNetboot OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ena/dis loading of config over n/w during bootup"
::= { agSystem 133 }
agNetbootTftpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tftp server address from where config file needs to be downloaded"
::= { agSystem 134 }
agNetbootCfgFile OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config file location on tftp server"
::= { agSystem 135 }
agCurRFC4741NetconfAccess OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current NETCONF server access state."
::= { agSystem 142 }
agNewRFC4741NetconfAccess OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable NETCONF server access state."
::= { agSystem 143 }
agCurRFC4741NetconfSessionTimeout OBJECT-TYPE
SYNTAX INTEGER (60..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Once NETCONF session setup, NETCONF server will allocate resource
for this session.
agCurRFC4741NetconfSessionTimeout indicates the number of seconds before
the resources are freed if there is no operation on this session"
::= { agSystem 144 }
agNewRFC4741NetconfSessionTimeout OBJECT-TYPE
SYNTAX INTEGER (60..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Once NETCONF session setup, NETCONF server will allocate resource
for this session.
agNewRFC4741NetconfSessionTimeout specifies the number of seconds before
the resources are freed if there is no operation on this session"
::= { agSystem 145 }
agCurRFC4741NetconfSshAccess OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current NETCONF server over SSH access state."
::= { agSystem 146 }
agNewRFC4741NetconfSshAccess OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable NETCONF server over SSH access state."
::= { agSystem 147 }
agCurRFC4741NetconfSshPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP port number that the NETCONF server over SSH is listening to
in the current configuration block."
::= { agSystem 148 }
agNewRFC4741NetconfSshPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port number that the NETCONF server over SSH is listening to
in the new configuration block."
::= { agSystem 149}
agCurCfgCpuRateLimitArp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current CPU rate limit for ARP requests and responses."
::= { agSystem 150 }
agNewCfgCpuRateLimitArp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New CPU rate limit for ARP requests and responses."
::= { agSystem 151 }
agCurCfgCpuRateLimitBpdu OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current CPU rate limit for BPDUs (STP, LACP)."
::= { agSystem 152 }
agNewCfgCpuRateLimitBpdu OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New CPU rate limit for BPDUs (STP, LACP)."
::= { agSystem 153 }
agCurCfgCpuRateLimitCntl OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current CPU rate limit for control packets (IGMP, DHCP)."
::= { agSystem 154 }
agNewCfgCpuRateLimitCntl OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New CPU rate limit for control packets (IGMP, DHCP)."
::= { agSystem 155 }
agCurCfgCpuRateLimitOther OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current CPU rate limit for other packets (Data, ICMP)."
::= { agSystem 156 }
agNewCfgCpuRateLimitOther OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New CPU rate limit for other packets (Data, ICMP)."
::= { agSystem 157 }
agCurCfgLFDStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the system will put any port
in an error-disabled state due to excessive link flaps.
A port will be put in an error-disabled state due to
excessive link flaps if this object and the port's
agPortCurCfgLFDStatus object both have a value of 'enable'.
A port has an excessive number of link flaps if the number
of link flaps detected during a time period in seconds
indicated by agCurCfgLFDTime exceeds the maximum number of
allowed flaps indicated by agCurCfgLFDFlaps."
DEFVAL { disable }
::= { agSystem 158 }
agNewCfgLFDStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the system should put any port
in an error-disabled state due to excessive link flaps.
Use this object to change the global setting of the Link
Flap Dampening error-disable action."
DEFVAL { disable }
::= { agSystem 159 }
agCurCfgLFDFlaps OBJECT-TYPE
SYNTAX INTEGER (1 .. 100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum number of flaps allowed
in a time period set by agCurCfgLFDTime."
DEFVAL { 5 }
::= { agSystem 160 }
agNewCfgLFDFlaps OBJECT-TYPE
SYNTAX INTEGER (1 .. 100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum number of flaps that should
be allowed in a time period. Use this object to change the
global maximum number of flaps allowed in a time period."
DEFVAL { 5 }
::= { agSystem 161 }
agCurCfgLFDTime OBJECT-TYPE
SYNTAX INTEGER (5 .. 500)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the length of time period in seconds
during which link flaps are counted."
DEFVAL { 30 }
::= { agSystem 162 }
agNewCfgLFDTime OBJECT-TYPE
SYNTAX INTEGER (5 .. 500)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the length of time period in seconds
that should be used to count link flaps."
DEFVAL { 30 }
::= { agSystem 163 }
agCurCfgTrapSrcLoopIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the loopback interface that should be used
for the source IP of the SNMP trap; 0 means that
no loopback interface is used as the source of the SNMP trap."
::= { agSystem 164 }
agNewCfgTrapSrcLoopIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the loopback interface that should be used
for the source IP of the SNMP trap; 0 means that
no loopback interface is used as the source of the SNMP trap."
::= { agSystem 165 }
agCfgMtm OBJECT-TYPE
SYNTAX INTEGER {
mtmValue1(1),
mtmValue2(2),
mtmValue3(3),
mtmValue4(4),
mtmValue5(5)
,mtmValue6(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the new value for MTM.
The available MTM values are:
1455-24E (1)
7309-BF7 (2)
7309-BR6 (3)
7309-HC7 (4)
7309-HC6 (5)
7120-24E (6)"
::= { agSystem 166 }
agCurCfgDefipData OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the use of default IP address on data interface,
as configured in the current configuration block."
::= { agSystem 167 }
agNewCfgDefipData OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the use of default IP address on data interface,
in the new configuration block."
::= { agSystem 168 }
agCurCfgDefipMgta OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the use of default IP address on mgta interface,
as configured in the current configuration block."
::= { agSystem 169 }
agNewCfgDefipMgta OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the use of default IP address on mgta interface,
in the new configuration block."
::= { agSystem 170 }
agCurCfgDefipMgtb OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the use of default IP address on mgtb interface,
as configured in the current configuration block."
::= { agSystem 171 }
agNewCfgDefipMgtb OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the use of default IP address on mgtb interface,
in the new configuration block."
::= { agSystem 172 }
agNewSecurityMode OBJECT-TYPE
SYNTAX INTEGER {
compatibility(0),
strict(1),
strictsnmpolduser(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to change switch security mode. There are thtree
security modes for IBM switch: strict mode, compatibility mode and strict mode
with SNMP not comply.
Strict mode:
Strict mode will have higher security level. Encryption algorithms in strict
mode will be compliance with the NIST SP 800-131A. Detailed information please
refer NIST SP 800-131A mode Functional Specification. SSH will be enabled by
default in strict mode for all platforms. It's strict(1) in this node.
Compatibility mode:
This is the default mode when switch first boot up. MD5/SHA/DES are selected as
Hash/Encryption algorithms. It's compatibility(2) in this node.
Strict mode with SNMP not comply:
To provide backward compatibility option, insecure MD5/DES are supported. It's
strictsnmpolduser(3) in this node.
The next time reload security mode is returned when this object ie read."
::= { agSystem 177 }
agCurSecurityMode OBJECT-TYPE
SYNTAX INTEGER {
compatibility(0),
strict(1),
strictsnmpolduser(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is an action object to change switch security mode. There are thtree
security modes for IBM switch: strict mode, compatibility mode and strict mode
with SNMP not comply.
Strict mode:
Strict mode will have higher security level. Encryption algorithms in strict
mode will be compliance with the NIST SP 800-131A. Detailed information please
refer NIST SP 800-131A mode Functional Specification. SSH will be enabled by
default in strict mode for all platforms. It's strict(1) in this node.
Compatibility mode:
This is the default mode when switch first boot up. MD5/SHA/DES are selected as
Hash/Encryption algorithms. It's compatibility(2) in this node.
Strict mode with SNMP not comply:
To provide backward compatibility option, insecure MD5/DES are supported. It's
strictsnmpolduser(3) in this node.
The current security mode is returned when this object ie read."
::= { agSystem 180 }
agNewCfgSslVersionLevel OBJECT-TYPE
SYNTAX INTEGER {
-- sslv3(0),
tls10(1),
tls11(2),
tls12(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New status of SSL Server Minimum Acceptable Protocol Version."
::= { agSystem 178 }
agCurCfgSslVersionLevel OBJECT-TYPE
SYNTAX INTEGER {
-- sslv3(0),
tls10(1),
tls11(2),
tls12(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of SSL Server Minimum Acceptable Protocol Version."
::= { agSystem 179 }
agCurCfgTrapHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgCurCfgTrapHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of current trap hosts configure."
::= { agSystem 184 }
agCurCfgTrapHostEntry OBJECT-TYPE
SYNTAX AgCurCfgTrapHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A trap host configuration on the switch."
INDEX { agCurCfgTrapHostIndex }
::= { agCurCfgTrapHostTable 1 }
AgCurCfgTrapHostEntry ::= SEQUENCE {
agCurCfgTrapHostIndex Integer32,
agCurCfgTrapHostAddress DisplayString ,
agCurCfgTrapHostCommStr DisplayString
}
agCurCfgTrapHostIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trap host index. Valid range is 1-16"
::= { agCurCfgTrapHostEntry 1 }
agCurCfgTrapHostAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trap host address."
::= { agCurCfgTrapHostEntry 2 }
agCurCfgTrapHostCommStr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trap host community string."
::= { agCurCfgTrapHostEntry 3 }
agNewCfgTrapHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgNewCfgTrapHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table for trap host definitions in the new configuration block."
::= { agSystem 185 }
agNewCfgTrapHostEntry OBJECT-TYPE
SYNTAX AgNewCfgTrapHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the trap host definition table"
INDEX { agNewCfgTrapHostIndex }
::= { agNewCfgTrapHostTable 1 }
AgNewCfgTrapHostEntry ::= SEQUENCE {
agNewCfgTrapHostIndex Integer32,
agNewCfgTrapHostAddress DisplayString ,
agNewCfgTrapHostCommStr DisplayString,
agNewCfgTrapHostDelete INTEGER
}
agNewCfgTrapHostIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trap host index. Valid range is 1-16"
::= { agNewCfgTrapHostEntry 1 }
agNewCfgTrapHostAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The trap host address in the new configuration block.
Setting IPv6 value is not supported in realease 7.9.x."
::= { agNewCfgTrapHostEntry 2 }
agNewCfgTrapHostCommStr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The trap host community string in the new configuration block."
::= { agNewCfgTrapHostEntry 3 }
agNewCfgTrapHostDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"By setting the value to delete(2), the entire row is deleted."
::= { agNewCfgTrapHostEntry 4 }
-- if defined(WEB_UI) removed this as it is wrongfully tied to BBI and did not allowed
-- agent to compile without web folder (BBI)
-- Syslog Configuration
agCurCfgSyslogHost OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The syslog host IP address in the current configuration block."
::= { agSyslog 1 }
agNewCfgSyslogHost OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog host IP address in the new configuration block."
::= { agSyslog 2 }
agCurCfgSyslog2Host OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The second syslog host IP address in the current configuration block."
::= { agSyslog 3 }
agNewCfgSyslog2Host OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second syslog host IP address in the new configuration block."
::= { agSyslog 4 }
agCurCfgSyslogFac OBJECT-TYPE
SYNTAX INTEGER {
local0(1),
local1(2),
local2(3),
local3(4),
local4(5),
local5(6),
local6(7),
local7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The facility level of syslog host in the current configuration block."
::= { agSyslog 5 }
agNewCfgSyslogFac OBJECT-TYPE
SYNTAX INTEGER {
local0(1),
local1(2),
local2(3),
local3(4),
local4(5),
local5(6),
local6(7),
local7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The facility level of syslog host in the new configuration block."
::= { agSyslog 6 }
agCurCfgSyslog2Fac OBJECT-TYPE
SYNTAX INTEGER {
local0(1),
local1(2),
local2(3),
local3(4),
local4(5),
local5(6),
local6(7),
local7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The facility level of second syslog host in the current
configuration block."
::= { agSyslog 7 }
agNewCfgSyslog2Fac OBJECT-TYPE
SYNTAX INTEGER {
local0(1),
local1(2),
local2(3),
local3(4),
local4(5),
local5(6),
local6(7),
local7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The facility level of second syslog host in the new
configuration block."
::= { agSyslog 8 }
agCurCfgSyslogSev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The severity of syslog host in the current configuration block."
::= { agSyslog 13 }
agNewCfgSyslogSev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The severity of syslog host in the new configuration block."
::= { agSyslog 14 }
agCurCfgSyslog2Sev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The severity of syslog2 host in the current configuration block."
::= { agSyslog 15 }
agNewCfgSyslog2Sev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The severity of syslogs host in the new configuration block."
::= { agSyslog 16 }
agCurCfgSyslogConsoleSev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The severity of syslogs console in the current configuration block."
::= { agSyslog 23 }
agNewCfgSyslogConsoleSev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The severity of syslogs console in the new configuration block."
::= { agSyslog 24 }
agCurCfgSyslogFlashSev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The severity of syslogs flash in the current configuration block."
::= { agSyslog 25 }
agNewCfgSyslogFlashSev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The severity of syslogs flash in the new configuration block."
::= { agSyslog 26 }
agClrSyslogMsgs OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all current Syslog messages."
::= { agSyslog 9 }
agSyslogMsgTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the syslog message table."
::= { agSyslog 10 }
agCurCfgSyslogHostPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Choose the port that the primary Syslog server is connected to."
::= { agSyslog 17 }
agNewCfgSyslogHostPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Choose the port that the primary Syslog server is connected to."
::= { agSyslog 18 }
agCurCfgSyslog2HostPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Choose the port that the secondary Syslog server is connected to."
::= { agSyslog 19 }
agNewCfgSyslog2HostPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Choose the port that the secondary Syslog server is connected to."
::= { agSyslog 20 }
agCurCfgSyslogSrcLoopIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the loopback interface that should be used
for the source IP of the syslog message; 0 means that
no loopback interface is used as the source of the syslog message."
::= { agSyslog 21 }
agNewCfgSyslogSrcLoopIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the loopback interface that should be used
for the source IP of the syslog message; 0 means that
no loopback interface is used as the source of the syslog message."
::= { agSyslog 22 }
agSyslogMsgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgSyslogMsgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of syslog messages."
::= { agSyslog 11 }
agSyslogMsgTableEntry OBJECT-TYPE
SYNTAX AgSyslogMsgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A syslog message stored on the switch."
INDEX { agSyslogMsgIndex }
::= { agSyslogMsgTable 1 }
AgSyslogMsgTableEntry ::= SEQUENCE {
agSyslogMsgIndex Integer32,
agSyslogMessage DisplayString
}
agSyslogMsgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The syslog message table index."
::= { agSyslogMsgTableEntry 1 }
agSyslogMessage OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The syslog message."
::= { agSyslogMsgTableEntry 2 }
agLog OBJECT IDENTIFIER ::= { agSyslog 12 }
agNewCfgSyslogTrapConsole OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable console syslog and SNMP trap in the
new configuration block."
::= { agLog 1 }
agCurCfgSyslogTrapConsole OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable console syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 2 }
agNewCfgSyslogTrapSystem OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable system level syslog and SNMP trap in the
new configuration block."
::= { agLog 3 }
agCurCfgSyslogTrapSystem OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable system level syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 4 }
agNewCfgSyslogTrapMgmt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable management(flash, config, login) syslog and SNMP
trap in the new configuration block."
::= { agLog 5 }
agCurCfgSyslogTrapMgmt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable management(flash, config, login) syslog and SNMP
trap, as configured in the current configuration block."
::= { agLog 6 }
agNewCfgSyslogTrapCli OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable CLI generated error syslog and SNMP trap in the
new configuration block."
::= { agLog 7 }
agCurCfgSyslogTrapCli OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable CLI generated error syslog and SNMP trap, as
configured in the current configuration block."
::= { agLog 8 }
agNewCfgSyslogTrapStg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable spanning tree syslog and SNMP trap in the
new configuration block."
::= { agLog 9 }
agCurCfgSyslogTrapStg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable spanning tree syslog and SNMP trap, as
configured in the current configuration block."
::= { agLog 10 }
agNewCfgSyslogTrapVlan OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable VLAN syslog and SNMP trap in the new
configuration block."
::= { agLog 11 }
agCurCfgSyslogTrapVlan OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable VLAN syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 12 }
agNewCfgSyslogTrapSsh OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable SSH, RADIUS syslog and SNMP trap in the new
configuration block."
::= { agLog 19 }
agCurCfgSyslogTrapSsh OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable SSH, RADIUS syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 20 }
agNewCfgSyslogTrapVrrp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable VRRP syslog and SNMP trap in the new
configuration block."
::= { agLog 21 }
agCurCfgSyslogTrapVrrp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable VRRP syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 22 }
agNewCfgSyslogTrapBgp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable BGP syslog and SNMP trap in the new
configuration block."
::= { agLog 23 }
agCurCfgSyslogTrapBgp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable BGP syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 24 }
agNewCfgSyslogTrapNtp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable NTP syslog and SNMP trap in the new
configuration block."
::= { agLog 25 }
agCurCfgSyslogTrapNtp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable NTP syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 26 }
agNewCfgSyslogTrapIp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable IP related syslog and SNMP trap in the
new configuration block."
::= { agLog 31 }
agCurCfgSyslogTrapIp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable IP related syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 32 }
agNewCfgSyslogTrapWeb OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable WEBUI related syslog and SNMP trap in the
new configuration block."
::= { agLog 35 }
agCurCfgSyslogTrapWeb OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable WEBUI related syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 36 }
agNewCfgSyslogTrapOspf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable OSPF related syslog and SNMP trap
in the new configuration block."
::= { agLog 41 }
agCurCfgSyslogTrapOspf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable OSPF related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 42 }
agNewCfgSyslogTrapRmon OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable RMON related syslog and SNMP trap
in the new configuration block."
::= { agLog 45 }
agCurCfgSyslogTrapRmon OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable RMON related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 46 }
agNewCfgSyslogTrapCfg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable CFG related syslog and SNMP trap in the
new configuration block."
::= { agLog 53 }
agCurCfgSyslogTrapCfg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable CFG related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 54 }
agNewCfgSyslogTrapServer OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Server related syslog and SNMP trap in the
new configuration block."
::= { agLog 55 }
agCurCfgSyslogTrapServer OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable Server related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 56 }
agNewCfgSyslogTrapDifftrak OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Difftrak related syslog and SNMP trap in the
new configuration block."
::= { agLog 57 }
agCurCfgSyslogTrapDifftrak OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable Difftrak related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 58 }
agNewCfgSyslogTrapHotlinks OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Hot Links related syslog and SNMP trap in the
new configuration block."
::= { agLog 61 }
agCurCfgSyslogTrapHotlinks OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable Hot Links related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 62 }
agNewCfgSyslogTrapLldp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable LLDP related syslog and SNMP trap in the
new configuration block."
::= { agLog 63 }
agCurCfgSyslogTrapLldp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable LLDP related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 64 }
agNewCfgSyslogTrapAll OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable all syslog and SNMP traps in the
new configuration block."
::= { agLog 65 }
agCurCfgSyslogTrapAll OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable all syslog and SNMP traps, as configured
in the current configuration block."
::= { agLog 66 }
agNewCfgSyslogTrapIpv6 OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable IPv6 related syslog and SNMP trap in the
new configuration block."
::= { agLog 67 }
agCurCfgSyslogTrapIpv6 OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable IPv6 related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 68 }
agNewCfgSyslogTrapFailover OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable failover related syslog and SNMP trap in the
new configuration block."
::= { agLog 73 }
agCurCfgSyslogTrapFailover OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable failover related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 74 }
agNewCfgSyslogTrapLacp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable LACP syslog and SNMP trap in the
new configuration block."
::= { agLog 77 }
agCurCfgSyslogTrapLacp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable LACP syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 78 }
agNewCfgSyslogTrapLink OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable all syslog and SNMP traps, in link
up/down."
::= { agLog 79 }
agCurCfgSyslogTrapLink OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable all syslog and SNMP traps, as currently
configured in link up/down."
::= { agLog 80 }
agNewCfgSyslogTrapOspfv3 OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable OSPFv3 related syslog and SNMP trap
in the new configuration block."
::= { agLog 81 }
agCurCfgSyslogTrapOspfv3 OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable OSPFv3 related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 82 }
agNewCfgSyslogTrapDcbx OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable all DCBX-related syslog and SNMP traps."
::= { agLog 85 }
agCurCfgSyslogTrapDcbx OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable all DCBX-related syslog and SNMP traps."
::= { agLog 86 }
agNewCfgSyslogTrapFcoe OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable all FCOE-related syslog and SNMP traps."
::= { agLog 87 }
agCurCfgSyslogTrapFcoe OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable all FCOE-related syslog and SNMP traps."
::= { agLog 88 }
agNewCfgSyslogTrapVm OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable all VM-related syslog and SNMP traps."
::= { agLog 89 }
agCurCfgSyslogTrapVm OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable all VM-related syslog and SNMP traps."
::= { agLog 90 }
agNewCfgSyslogTrapVnic OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable all VNIC-related syslog and SNMP traps."
::= { agLog 91 }
agCurCfgSyslogTrapVnic OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable all VNIC-related syslog and SNMP traps."
::= { agLog 92 }
agNewCfgSyslogTrapCfgchg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable configuration change related syslog and SNMP trap
in the new configuration block."
::= { agLog 93 }
agCurCfgSyslogTrapCfgchg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable configuration change related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 94 }
agNewCfgSyslogTrapVlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Vlag related syslog and SNMP trap."
::= { agLog 95 }
agCurCfgSyslogTrapVlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable Vlag related syslog and SNMP trap."
::= { agLog 96 }
agNewCfgSyslogTrapIgmpGroup OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable all IGMP GROUP-related syslog and SNMP traps."
::= { agLog 99 }
agCurCfgSyslogTrapIgmpGroup OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable all IGMP GROUP-related syslog and SNMP traps."
::= { agLog 100 }
agNewCfgSyslogTrapIgmpMrouter OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable all IGMP MROUTER-related syslog and SNMP traps."
::= { agLog 101 }
agCurCfgSyslogTrapIgmpMrouter OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable all IGMP MROUTER-related syslog and SNMP traps."
::= { agLog 102 }
agNewCfgSyslogTrapIgmpQuerier OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable all IGMP QUERIER-related syslog and SNMP traps."
::= { agLog 103 }
agCurCfgSyslogTrapIgmpQuerier OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable all IGMP QUERIER-related syslog and SNMP traps."
::= { agLog 104 }
agNewCfgSyslogTrapMld OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable all MLD-related syslog and SNMP traps."
::= { agLog 105 }
agCurCfgSyslogTrapMld OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable all MLD-related syslog and SNMP traps."
::= { agLog 106 }
-- TFTP Config
agTransferServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The FTP/TFTP server IP address or domain name."
::= { agTransfer 1 }
agTransferImage OBJECT-TYPE
SYNTAX INTEGER {
image1(2),
image2(3),
boot(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether the image file should be loaded in image1 or image2 in flash."
::= { agTransfer 2 }
agTransferImageFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The image file name to be transferred."
::= { agTransfer 3 }
agTransferCfgFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration file name."
::= { agTransfer 4 }
agTransferDumpFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The core dump file name."
::= { agTransfer 5 }
agTransferAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
img-get(2),
cfg-get(3),
cfg-put(4),
dump-put(5),
img-put(7),
tsdump-put(8)
,ca-get(14)
,hostcert-get(15)
,hostkey-get(16)
,pubkey-get(17)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to perform various FTP/TFTP Get or Put functions.
The FTP/TFTP sever is specified in agTransferServer object.
img-get(2) - Download switch image from a specified image
file(agTransferImageFileName) on the FTP/TFTP server to
the destinated storage(agTransferImage).
The duration of the action will depend on the image
downloading and writting time on the network element.
Sugguest 150 seconds timeout setting in MIB Browser to get
the correct response for this action.
cfg-get(3) - Download switch configuration from a specified
file(agTransferCfgFileName) on the FTP/TFTP server.
cfg-put(4) - Upload switch configuration to a specified
file(agTransferCfgFileName) on the FTP/TFTP server.
dump-put(5) - Download switch core dump to a specified
file(agTransferDumpFileName) on the FTP/TFTP server.
bkpdump-put(6)- Download switch backup core dump to a specified
file(agTransferDumpFileName) on the FTP/TFTP server.
img-put(7) - Upload specified switch image to a specified image
file(agTransferImageFileName) on the FTP/TFTP server.
tsdump-put(8) - Download switch tech support dump to a specified
file(agTransferTSDumpFileName) on the FTP/TFTP server.
bogon-get(9) - Download bogon config file from a specified bogon
file(uses agTransferImageFileName) on the FTP/TFTP server.
ca-get(14) - Download CA root certificate from a specified
file(agTransferCaFileName) on the TFTP server.
This command did not support FTP.
hostcert-get(15) - Download host certificate from a specified
file(agTransferHostCertFileName) on the TFTP server.
This command did not support FTP.
hostkey-get(16) - Download host private key from a specified
file(agTransferHostKeyFileName) on the TFTP server.
This command did not support FTP.
pubkey-get(17) - Download SSH client public key from a specified
file(agTransferPublicKeyFileName) on the TFTP/SFTP server.
This command did not support FTP.
other(1) is returned always when read."
::= { agTransfer 6 }
agTransferLastActionStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The recorded status of the previous FTP/TFTP activity."
::= { agTransfer 7 }
agTransferPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether the FTP/TFTP operation should be performed over the
data port or the management port."
::= { agTransfer 8 }
agTransferUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The username for the FTP server or blank for TFTP server."
::= { agTransfer 9 }
agTransferPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password for the FTP server. For security reason, an empty string will be returned when the OID is read."
::= { agTransfer 10 }
agTransferTSDumpFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TS dump file name."
::= { agTransfer 11 }
agTransferLastConfigurationActionStatus OBJECT-TYPE
SYNTAX INTEGER {
successfully(1),
failed(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the last configuration action using the file ftp/tftp'd
from server."
::= { agTransfer 14 }
agTransferCaFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CA certificate file name."
::= { agTransfer 15 }
agTransferHostCertFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Host certificate file name."
::= { agTransfer 16 }
agTransferHostKeyFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Host private key file name."
::= { agTransfer 17 }
agTransferProtocol OBJECT-TYPE
SYNTAX INTEGER {
tftp(1),
ftp(2),
sftp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol used by this transfer."
::= { agTransfer 18 }
agServerPort OBJECT-TYPE
SYNTAX INTEGER {
tftp(69),
ftp(21),
sftp(22)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port is listened on the server."
::= { agTransfer 19 }
agTransferPublicKeyUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user of the public key file."
::= { agTransfer 21 }
agTransferPublicKeyFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The client pulic key file name."
::= { agTransfer 22 }
-- Agent Port Table
agPortTableMaxEnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the port configuration host table."
::= { agPortConfig 1 }
agPortCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgPortCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port configuration in the current configuration block."
::= { agPortConfig 2 }
agPortCurCfgTableEntry OBJECT-TYPE
SYNTAX AgPortCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port table in the current configuration block."
INDEX { agPortCurCfgIndx }
::= { agPortCurCfgTable 1 }
AgPortCurCfgTableEntry ::= SEQUENCE {
agPortCurCfgIndx PortNumber,
agPortCurCfgState INTEGER,
agPortCurCfgVlanTag INTEGER,
agPortCurCfgRmon INTEGER,
agPortCurCfgPVID Integer32,
agPortCurCfgGigEthFctl INTEGER,
agPortCurCfgLinkTrap INTEGER,
agPortCurCfgDscpRemarking INTEGER,
agPortCurCfgTagPVID INTEGER,
agPortCurCfgMulticastThreshold INTEGER,
agPortCurCfgMulticastThresholdRate INTEGER,
agPortCurCfgBroadcastThreshold INTEGER,
agPortCurCfgBroadcastThresholdRate INTEGER,
agPortCurCfgDLFThreshold INTEGER,
agPortCurCfgDLFThresholdRate INTEGER,
agPortCurCfgPortAlias DisplayString,
agPortCurCfgPortName DisplayString
,agPortCurCfgLearning INTEGER
,agPortCurCfgFloodBlocking INTEGER
,agPortCurCfgType DisplayString
,agPortCurCfgLinkType INTEGER
,agPortCurCfgEdge INTEGER
,agPortCurCfgErrDisableRecovery INTEGER
,agPortCurCfgUdld INTEGER
,agPortCurCfgUdldMode INTEGER
,agPortCurCfgOam INTEGER
,agPortCurCfgOamMode INTEGER
,agPortCurCfgBpduGuard INTEGER
,agPortCurCfgMacAddrNotif INTEGER
,agPortCurCfgStpExtGuard INTEGER
,agPortCurCfgLFDStatus INTEGER
}
agPortCurCfgIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in port configurations table."
::= { agPortCurCfgTableEntry 1 }
agPortCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the state of the port."
::= { agPortCurCfgTableEntry 2 }
agPortCurCfgVlanTag OBJECT-TYPE
SYNTAX INTEGER {
tagged(2),
untagged(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is VLAN tag state of the port"
::= { agPortCurCfgTableEntry 3 }
agPortCurCfgRmon OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to turn RMON on or off on the port."
::= { agPortCurCfgTableEntry 5 }
agPortCurCfgPVID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default VLAN ID for the port.
"
::= { agPortCurCfgTableEntry 6 }
agPortCurCfgGigEthFctl OBJECT-TYPE
SYNTAX INTEGER {
transmit(2),
receive(3),
both(4),
none(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to select port flow control for
gigabit Ethernet connection."
::= { agPortCurCfgTableEntry 12 }
agPortCurCfgPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port name."
::= { agPortCurCfgTableEntry 13 }
agPortCurCfgLinkTrap OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether linkUp/linkDown traps should be
generated for this interface.
By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface (as defined in the
ifStackTable), and disabled(2) otherwise."
::= { agPortCurCfgTableEntry 16 }
agPortCurCfgDscpRemarking OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable Dscp remarking for the switch port."
::= { agPortCurCfgTableEntry 23 }
agPortCurCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port alias."
::= { agPortCurCfgTableEntry 24 }
agPortCurCfgTagPVID OBJECT-TYPE
SYNTAX INTEGER {
tagged(2),
untagged(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is PVID tag state of the port"
::= { agPortCurCfgTableEntry 25 }
agPortCurCfgLearning OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable L2 (FDB) Learning for the switch port."
::= { agPortCurCfgTableEntry 26 }
agPortCurCfgFloodBlocking OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable flood blocking for the switch port."
::= { agPortCurCfgTableEntry 27 }
agPortCurCfgType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..7))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port type."
::= { agPortCurCfgTableEntry 29 }
agPortCurCfgLinkType OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
p2p(2),
shared(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of port connection. (for PVRST only)"
::= { agPortCurCfgTableEntry 30 }
agPortCurCfgEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of port edge."
::= { agPortCurCfgTableEntry 31 }
agPortCurCfgErrDisableRecovery OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the system will automatically
re-enable this port if it becomes error-disabled. This port
will be re-enabled after the time interval specified by the
agCurCfgErrDisableTimeout object has elapsed.
A port is in error-disabled state when it is operationally
disabled due to abnormal conditions detected on the port.
If this port is error-disabled, it will only be re-enabled
by the system if the agCurCfgErrDisableRecovery object and
this object both have a value of 'enable(1)'."
DEFVAL { enable }
::= { agPortCurCfgTableEntry 35 }
agPortCurCfgUdld OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable UDLD for the switch port."
::= { agPortCurCfgTableEntry 37 }
agPortCurCfgUdldMode OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
aggressive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable UDLD mode for the switch port."
::= { agPortCurCfgTableEntry 38 }
agPortCurCfgOam OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable OAM Discovery process for the switch port."
::= { agPortCurCfgTableEntry 39 }
agPortCurCfgOamMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable OAM mode for the switch port."
::= { agPortCurCfgTableEntry 40 }
agPortCurCfgBpduGuard OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable BPDU guard for the switch port."
::= { agPortCurCfgTableEntry 41 }
agPortCurCfgMulticastThreshold OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of the port's Multicast Threshold."
::= { agPortCurCfgTableEntry 42 }
agPortCurCfgMulticastThresholdRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current port's Multicast Threshold Rate."
::= { agPortCurCfgTableEntry 43 }
agPortCurCfgBroadcastThreshold OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of the port's Broadcast Threshold."
::= { agPortCurCfgTableEntry 44 }
agPortCurCfgBroadcastThresholdRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current port's Broadcast Threshold Rate."
::= { agPortCurCfgTableEntry 45 }
agPortCurCfgDLFThreshold OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of the port's Destination Lookup Fail Threshold."
::= { agPortCurCfgTableEntry 46 }
agPortCurCfgDLFThresholdRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current port's Destination Lookup Fail Threshold Rate."
::= { agPortCurCfgTableEntry 47 }
agPortCurCfgMacAddrNotif OBJECT-TYPE
SYNTAX INTEGER{
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the state of the MAC address notification
syslog messages on the port."
::= { agPortCurCfgTableEntry 48 }
agPortCurCfgStpExtGuard OBJECT-TYPE
SYNTAX INTEGER {
loop(1),
root(2),
none(3),
default(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state for spanning tree guard type"
::= { agPortCurCfgTableEntry 52 }
agPortCurCfgLFDStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the system will put this port
in an error-disabled state due to excessive link flaps.
A port will be put in an error-disabled state due to
excessive link flaps if this object and the global
agCurCfgLFDStatus object both have a value of 'enable'.
A port has an excessive number of link flaps if the number
of link flaps detected during a time period in seconds
indicated by agCurCfgLFDTime exceeds the maximum number of
allowed flaps indicated by agCurCfgLFDFlaps."
DEFVAL { enable }
::= { agPortCurCfgTableEntry 53 }
agPortNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgPortNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port configuration in the new configuration block."
::= { agPortConfig 3 }
agPortNewCfgTableEntry OBJECT-TYPE
SYNTAX AgPortNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port configuration table in the new configuration block."
INDEX { agPortNewCfgIndx }
::= { agPortNewCfgTable 1 }
AgPortNewCfgTableEntry ::= SEQUENCE {
agPortNewCfgIndx PortNumber,
agPortNewCfgState INTEGER,
agPortNewCfgVlanTag INTEGER,
agPortNewCfgRmon INTEGER,
agPortNewCfgPVID Integer32,
agPortNewCfgGigEthFctl INTEGER,
agPortNewCfgLinkTrap INTEGER,
agPortNewCfgDscpRemarking INTEGER,
agPortNewCfgTagPVID INTEGER,
agPortNewCfgMulticastThreshold INTEGER,
agPortNewCfgMulticastThresholdRate INTEGER,
agPortNewCfgBroadcastThreshold INTEGER,
agPortNewCfgBroadcastThresholdRate INTEGER,
agPortNewCfgDLFThreshold INTEGER,
agPortNewCfgDLFThresholdRate INTEGER,
agPortNewCfgPortName DisplayString
,agPortNewCfgLearning INTEGER
,agPortNewCfgFloodBlocking INTEGER
,agPortNewCfgType DisplayString
,agPortNewCfgLinkType INTEGER
,agPortNewCfgEdge INTEGER
,agPortNewCfgErrDisableRecovery INTEGER
,agPortNewCfgUdld INTEGER
,agPortNewCfgUdldMode INTEGER
,agPortNewCfgOam INTEGER
,agPortNewCfgOamMode INTEGER
,agPortNewCfgBpduGuard INTEGER
,agPortNewCfgMacAddrNotif INTEGER
,agPortNewCfgStpExtGuard INTEGER
,agPortNewCfgLFDStatus INTEGER
}
agPortNewCfgIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in port configurations table."
::= { agPortNewCfgTableEntry 1 }
agPortNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the state of the port."
::= { agPortNewCfgTableEntry 2 }
agPortNewCfgVlanTag OBJECT-TYPE
SYNTAX INTEGER {
tagged(2),
untagged(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is VLAN tag state of the port"
::= { agPortNewCfgTableEntry 3 }
agPortNewCfgRmon OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to turn RMON on or off on the port."
::= { agPortNewCfgTableEntry 5 }
agPortNewCfgPVID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default VLAN ID for the port.
"
::= { agPortNewCfgTableEntry 6 }
agPortNewCfgGigEthFctl OBJECT-TYPE
SYNTAX INTEGER {
transmit(2),
receive(3),
both(4),
none(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to select port flow control for
gigabit Ethernet connection."
::= { agPortNewCfgTableEntry 12 }
agPortNewCfgPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch port name."
::= { agPortNewCfgTableEntry 13 }
agPortNewCfgLinkTrap OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether linkUp/linkDown traps should be
generated for this interface.
By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface (as defined in the
ifStackTable), and disabled(2) otherwise."
::= { agPortNewCfgTableEntry 16 }
agPortNewCfgDscpRemarking OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Dscp remarking for the switch port."
::= { agPortNewCfgTableEntry 23 }
agPortNewCfgTagPVID OBJECT-TYPE
SYNTAX INTEGER {
tagged(2),
untagged(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is PVID tag state of the port"
::= { agPortNewCfgTableEntry 25 }
agPortNewCfgLearning OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable L2 (FDB) Learning for the switch port."
::= { agPortNewCfgTableEntry 26 }
agPortNewCfgFloodBlocking OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable flood blocking for the switch port."
::= { agPortNewCfgTableEntry 27 }
agPortNewCfgType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..7))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port type."
::= { agPortNewCfgTableEntry 29 }
agPortNewCfgLinkType OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
p2p(2),
shared(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of port connection. (for PVRST only)"
::= { agPortNewCfgTableEntry 30 }
agPortNewCfgEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of port edge."
::= { agPortNewCfgTableEntry 31 }
agPortNewCfgErrDisableRecovery OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the system should automatically
re-enable this port when it becomes error-disabled. Use this
object to change the port-level setting of the error-disable
recovery action."
DEFVAL { enable }
::= { agPortNewCfgTableEntry 35 }
agPortNewCfgUdld OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable UDLD for the switch port."
::= { agPortNewCfgTableEntry 37 }
agPortNewCfgUdldMode OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
aggressive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable UDLD mode for the switch port."
::= { agPortNewCfgTableEntry 38 }
agPortNewCfgOam OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable OAM Discovery process for the switch port."
::= { agPortNewCfgTableEntry 39 }
agPortNewCfgOamMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable OAM mode for the switch port."
::= { agPortNewCfgTableEntry 40 }
agPortNewCfgBpduGuard OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable BPDU guard for the switch port."
::= { agPortNewCfgTableEntry 41 }
agPortNewCfgMulticastThreshold OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New status of the port's Multicast Threshold."
::= { agPortNewCfgTableEntry 42 }
agPortNewCfgMulticastThresholdRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New port's Multicast Threshold Rate."
::= { agPortNewCfgTableEntry 43 }
agPortNewCfgBroadcastThreshold OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New status of the port's Broadcast Threshold."
::= { agPortNewCfgTableEntry 44 }
agPortNewCfgBroadcastThresholdRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New port's Broadcast Threshold Rate."
::= { agPortNewCfgTableEntry 45 }
agPortNewCfgDLFThreshold OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New status of the port's Destination Lookup Fail Threshold."
::= { agPortNewCfgTableEntry 46 }
agPortNewCfgDLFThresholdRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New port's Destination Lookup Fail Threshold Rate."
::= { agPortNewCfgTableEntry 47 }
agPortNewCfgMacAddrNotif OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or Disables the MAC address notification
syslog messages on the port."
::= { agPortNewCfgTableEntry 48 }
agPortNewCfgStpExtGuard OBJECT-TYPE
SYNTAX INTEGER {
loop(1),
root(2),
none(3),
default(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set spanning tree guard type"
::= { agPortNewCfgTableEntry 52 }
agPortNewCfgLFDStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the system should put this port
in an error-disabled state due to excessive link flaps.
Use this object to change the port setting of the Link Flap
Dampening error-disable action."
DEFVAL { enable }
::= { agPortNewCfgTableEntry 53 }
-- Agent Fast Forwarding Port Table
-- Agent Fast Forwarding Port Table
-- SSH Configuration
sshCurCfgScpAdm OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SCP-only admin password."
::= { agSSHConfig 3 }
sshNewCfgScpAdm OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set SCP-only admin password."
::= { agSSHConfig 4 }
sshNewCfgHKeyGen OBJECT-TYPE
SYNTAX INTEGER {
generate(1),
other(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to generate the RSA host key.
other(2) is returned always when read.
The following values are writable: generate(1).. Generate the RSA host key."
::= { agSSHConfig 5 }
sshCurCfgSSHPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSH server port number."
::= { agSSHConfig 7 }
sshNewCfgSSHPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set SSH server port number."
::= { agSSHConfig 8 }
sshCurCfgScpApplySave OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SCP apply and save."
::= { agSSHConfig 9 }
sshNewCfgScpApplySave OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the SCP apply and save."
::= { agSSHConfig 10 }
sshCurCfgStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSH server status."
::= { agSSHConfig 11 }
sshNewCfgStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn SSH server ON/OFF."
::= { agSSHConfig 12 }
sshPubKeyRemAll OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove all the public key entries on switch."
::= { agSSHConfig 13 }
sshPubKeyRemUser OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove a specific username from the public key database."
::= { agSSHConfig 14 }
sshPubKeyConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SshPubKeyConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table for ssh public keys and its users."
::= { agSSHConfig 15 }
sshPubKeyConfigEntry OBJECT-TYPE
SYNTAX SshPubKeyConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the ssh public keys tables."
INDEX { sshPubKeyConfigIndex }
::= { sshPubKeyConfigTable 1 }
SshPubKeyConfigEntry ::= SEQUENCE {
sshPubKeyConfigIndex Integer32,
sshPubKeyType INTEGER,
sshPubKeyHashValue OCTET STRING,
sshPubkeyUserBmap OCTET STRING,
sshPubKeyAddUser DisplayString (SIZE(0..64)),
sshPubKeyDelUser DisplayString (SIZE(0..64)),
sshPubKeyRemEntry INTEGER
}
sshPubKeyConfigIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ssh public key entry."
::= { sshPubKeyConfigEntry 1 }
sshPubKeyType OBJECT-TYPE
SYNTAX INTEGER{
rsa(1),
dsa(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the type of the public key."
::= { sshPubKeyConfigEntry 2 }
sshPubKeyHashValue OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hash value of a specific public key."
::= { sshPubKeyConfigEntry 3 }
sshPubkeyUserBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user list in the key entry. The user are presented in bitmap format.
as follows:
OCTET 1 OCTET 2 OCTET 3 OCTET 4
xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx
|| | | |||| ||________ oper
|| | | |||| |_________ user
|| | | ||||___________ admin
|| | | |||____________ maint
|| | | ||_____________ scpadmin
|| | | |______________ support
|| | |
|| | |________________ user defined 20
|| |
|| | ...................
|| |______ user defined 5
||..........
||..........
||_________ user defined 2
|__________ default user defined 1: USERID
Bit On - The represented user belongs to the key entry
Bit Off - The represented user does not belong to the key entry
Bit 0-19 represent the 20 user-defined users(uid=BitNUM+1),
more details can be found in agAccess->agAccessUserCurCfgTable.
Bit 20-25 represent the 6 pre-defined user(from support to oper)."
::= { sshPubKeyConfigEntry 4 }
sshPubKeyAddUser OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add a new user to a particular public key.
Reminder: The user must be a valid system user."
::= { sshPubKeyConfigEntry 5 }
sshPubKeyDelUser OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove a user from the user list of the public key entry."
::= { sshPubKeyConfigEntry 6 }
sshPubKeyRemEntry OBJECT-TYPE
SYNTAX INTEGER{
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove a public key entry."
::= { sshPubKeyConfigEntry 7 }
sshCurCfgSSHAttempts OBJECT-TYPE
SYNTAX INTEGER (1..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSH server maximum authentication attempts."
::= { agSSHConfig 16 }
sshNewCfgSSHAttempts OBJECT-TYPE
SYNTAX INTEGER (1..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set SSH server maximum authentication attempts."
::= { agSSHConfig 17 }
-- RADIUS Configuration
radCurCfgPrimaryServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the Primary RADIUS server."
::= { agRadiusConfig 1 }
radNewCfgPrimaryServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the Primary RADIUS server."
::= { agRadiusConfig 2 }
radCurCfgSecondaryServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the Secondary RADIUS server."
::= { agRadiusConfig 3 }
radNewCfgSecondaryServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the Secondary RADIUS server."
::= { agRadiusConfig 4 }
radCurCfgPort OBJECT-TYPE
SYNTAX INTEGER (1500..3000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the RADIUS port number."
::= { agRadiusConfig 5 }
radNewCfgPort OBJECT-TYPE
SYNTAX INTEGER (1500..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the RADIUS port number."
::= { agRadiusConfig 6 }
radCurCfgTimeout OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of seconds before resending authentication
to RADIUS server."
::= { agRadiusConfig 7 }
radNewCfgTimeout OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of seconds before resending authentication
to RADIUS server."
::= { agRadiusConfig 8 }
radCurCfgRetries OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of retries to the RADIUS server."
::= { agRadiusConfig 9 }
radNewCfgRetries OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of retries to the RADIUS server."
::= { agRadiusConfig 10 }
radCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable RADIUS authentication."
::= { agRadiusConfig 11 }
radNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable RADIUS authentication."
::= { agRadiusConfig 12 }
radCurCfgAuthenString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RADIUS authentication string."
::= { agRadiusConfig 13 }
radNewCfgAuthenString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RADIUS authentication string."
::= { agRadiusConfig 14 }
radCurCfgBackdoor OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable RADIUS backdoor for telnet/ssh/http/https."
::= { agRadiusConfig 15 }
radNewCfgBackdoor OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable RADIUS backdoor for telnet/ssh/http/https."
::= { agRadiusConfig 16 }
radCurCfgAuthenSecondString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The second RADIUS authentication string."
::= { agRadiusConfig 17 }
radNewCfgAuthenSecondString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second RADIUS authentication string."
::= { agRadiusConfig 18 }
radCurCfgSecBd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable RADIUS secure backdoor for telnet."
::= { agRadiusConfig 19 }
radNewCfgSecBd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable RADIUS secure backdoor for telnet."
::= { agRadiusConfig 20 }
radCurCfgPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify whether the Radius should be performed over the
data port or the management port."
::= { agRadiusConfig 21 }
radNewCfgPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether the Radius should be performed over the
data port or the management port."
::= { agRadiusConfig 22 }
radCurCfgSecPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify whether the Radius should be performed over the
data port or the management port."
::= { agRadiusConfig 23 }
radNewCfgSecPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether the Radius should be performed over the
data port or the management port."
::= { agRadiusConfig 24 }
radCurCfgSrcLoopIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the loopback interface that should be used
for the source IP of the Radius message; 0 means that
no loopback interface is used as the source of the Radius message."
::= { agRadiusConfig 25 }
radNewCfgSrcLoopIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the loopback interface that should be used
for the source IP of the Radius message; 0 means that
no loopback interface is used as the source of the Radius message."
::= { agRadiusConfig 26 }
-- NTP Configuration
agCurCfgNTPServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..46))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NTP Server Address."
::= { agNTP 1 }
agNewCfgNTPServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..46))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NTP Server Address."
::= { agNTP 2 }
agCurCfgNTPResyncInterval OBJECT-TYPE
SYNTAX INTEGER (5..44640)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NTP Server resync interval in minutes."
::= { agNTP 3 }
agNewCfgNTPResyncInterval OBJECT-TYPE
SYNTAX INTEGER (5..44640)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NTP Server resync interval in minutes."
::= { agNTP 4 }
agCurCfgNTPService OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable NTP Service."
::= { agNTP 9 }
agNewCfgNTPService OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable NTP Service."
::= { agNTP 10 }
agCurCfgNTPSecServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..46))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Secondary NTP Server Address."
::= { agNTP 11 }
agNewCfgNTPSecServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..46))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Secondary NTP Server Address."
::= { agNTP 12 }
agCurCfgNTPServerPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Choose the port that the primary server is connected to."
::= { agNTP 13 }
agNewCfgNTPServerPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Choose the port that the primary server is connected to."
::= { agNTP 14 }
agCurCfgNTPSecServerPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Choose the port that the secondary server is connected to."
::= { agNTP 15 }
agNewCfgNTPSecServerPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Choose the port that the secondary server is connected to."
::= { agNTP 16 }
agCurCfgNTPSrcLoopIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the loopback interface that should be used
for the source IP of the NTP packet; 0 means that
no loopback interface is used as the source of the NTP packet."
::= { agNTP 17 }
agNewCfgNTPSrcLoopIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the loopback interface that should be used
for the source IP of the NTP packet; 0 means that
no loopback interface is used as the source of the NTP packet."
::= { agNTP 18 }
-- APPLY Configuration
agApplyPending OBJECT-TYPE
SYNTAX INTEGER {
applyNeeded(2),
noApplyNeeded(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when read, gives the user information
whether an apply action is needed and that the configuration
has been chaged by the user actions. The user then can
apply the changes by setting proper value to the object
agApplyConfiguration described above."
::= { agApply 1 }
agApplyConfig OBJECT-TYPE
SYNTAX INTEGER {
apply(1),
idle(2),
inprogress(3),
complete(4),
failed(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is read the current state is returned.
idle(2) indicates that there is no apply in progess.
complete(4) indicates that the last apply operation is completed.
Setting the value to apply(1), will write all the changes made
since the last apply to the current configuration block.
If the apply is successful this variable will return the state
'complete' else it will return 'failed'. In case of failure,
to read the reason for failure use the agApplyTable.
Once the operation is completed or the agApplyTable is read in case
of failure, the apply buffer needs to be freed and the agApplyState
should be set back to 'idle' state so others can issue the apply
command via SNMP."
::= { agApply 2 }
agApplyTableSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of strings in the apply table."
::= { agApply 4 }
agApplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgApplyTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of failure reasons for an apply of current
configuration block changes."
::= { agApply 5 }
agApplyTableEntry OBJECT-TYPE
SYNTAX AgApplyTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table of failure reasons for an apply
(information about a particular reason of failure)."
INDEX { agApplyIndex }
::= { agApplyTable 1 }
AgApplyTableEntry ::= SEQUENCE {
agApplyIndex Integer32,
agApplyString OCTET STRING
}
agApplyIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The table index."
::= { agApplyTableEntry 1 }
agApplyString OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string in the apply table."
::= { agApplyTableEntry 2 }
-- TACACS+ Configuration
tacCurCfgPrimaryServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the Primary TACACS+ server."
::= { agTacacsConfig 1 }
tacNewCfgPrimaryServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the Primary TACACS+ server."
::= { agTacacsConfig 2 }
tacCurCfgSecondaryServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the Secondary TACACS+ server."
::= { agTacacsConfig 3 }
tacNewCfgSecondaryServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the Secondary TACACS+ server."
::= { agTacacsConfig 4 }
tacCurCfgPort OBJECT-TYPE
SYNTAX INTEGER (1..65000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the TACACS+ port number."
::= { agTacacsConfig 5 }
tacNewCfgPort OBJECT-TYPE
SYNTAX INTEGER (1..65000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the TACACS+ port number."
::= { agTacacsConfig 6 }
tacCurCfgTimeout OBJECT-TYPE
SYNTAX INTEGER (4..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of seconds before resending authentication
to TACACS+ server."
::= { agTacacsConfig 7 }
tacNewCfgTimeout OBJECT-TYPE
SYNTAX INTEGER (4..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of seconds before resending authentication
to TACACS+ server."
::= { agTacacsConfig 8 }
tacCurCfgRetries OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of retries to the TACACS+ server."
::= { agTacacsConfig 9 }
tacNewCfgRetries OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of retries to the TACACS+ server."
::= { agTacacsConfig 10 }
tacCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable TACACS+ authentication."
::= { agTacacsConfig 11 }
tacNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable TACACS+ authentication."
::= { agTacacsConfig 12 }
tacCurCfgAuthenString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TACACS+ authentication string."
::= { agTacacsConfig 13 }
tacNewCfgAuthenString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TACACS+ authentication string."
::= { agTacacsConfig 14 }
tacCurCfgBackdoor OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable TACACS+ backdoor for telnet/ssh/http/https."
::= { agTacacsConfig 15 }
tacNewCfgBackdoor OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable TACACS+ backdoor for telnet/ssh/http/https."
::= { agTacacsConfig 16 }
tacCurCfgAuthenSecondString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The second TACACS+ authentication string."
::= { agTacacsConfig 17 }
tacNewCfgAuthenSecondString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second TACACS+ authentication string."
::= { agTacacsConfig 18 }
tacCurCfgCmdAuthor OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable TACACS+ command authorization."
::= { agTacacsConfig 19 }
tacNewCfgCmdAuthor OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable TACACS+ command authorization."
::= { agTacacsConfig 20 }
tacCurCfgCmdLogging OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable TACACS+ command logging."
::= { agTacacsConfig 21 }
tacNewCfgCmdLogging OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable TACACS+ command logging."
::= { agTacacsConfig 22 }
tacCurCfgSecBd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable TACACS+ secure backdoor for telnet."
::= { agTacacsConfig 23 }
tacNewCfgSecBd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable TACACS+ secure backdoor for telnet."
::= { agTacacsConfig 24 }
tacCurCfgCmap OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable Tacacs+ new privilege level mapping, as
configured in the current configuration block."
::= { agTacacsConfig 25 }
tacNewCfgCmap OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Tacacs+ new privilege level mapping."
::= { agTacacsConfig 26 }
tacCurCfgEnaPassChange OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Enable/Disable Tacacs+ password change."
::= { agTacacsConfig 29 }
tacNewCfgEnaPassChange OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable Tacacs+ password change."
::= { agTacacsConfig 30 }
tacChangePassForUser OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The username for changing server password."
::= { agTacacsConfig 31 }
tacChangePassCurPass OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current password for tacacs server."
::= { agTacacsConfig 32 }
tacChangePassNewPass OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The new password for tacacs server."
::= { agTacacsConfig 33 }
tacChangePassForServer OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change password for <1/2> Tacacs+ server."
::= { agTacacsConfig 34 }
tacCurCfgPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify whether the Tacacs should be performed over the
data port or the management port."
::= { agTacacsConfig 35 }
tacNewCfgPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether the Tacacs should be performed over the
data port or the management port."
::= { agTacacsConfig 36 }
tacCurCfgSecPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify whether the Tacacs should be performed over the
data port or the management port."
::= { agTacacsConfig 37 }
tacNewCfgSecPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether the Tacacs should be performed over the
data port or the management port."
::= { agTacacsConfig 38 }
agTacacsUserMapCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgTacacsUserMapCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of tacacs+ user map current configuration."
::= { agTacacsConfig 39 }
agTacacsUserMapCurCfgTableEntry OBJECT-TYPE
SYNTAX AgTacacsUserMapCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the tacacs+ user mapping table."
INDEX { agTacacsUserMapCurCfgUId }
::= { agTacacsUserMapCurCfgTable 1 }
AgTacacsUserMapCurCfgTableEntry ::= SEQUENCE {
agTacacsUserMapCurCfgUId Integer32,
agTacacsUserMapCurCfgMapping INTEGER
}
agTacacsUserMapCurCfgUId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current config remote privilege identifier.
The identifier value corresponds to the remote privilege."
::= { agTacacsUserMapCurCfgTableEntry 1 }
agTacacsUserMapCurCfgMapping OBJECT-TYPE
SYNTAX INTEGER {
none(0),
user(1),
oper(2),
admin(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Tacacs+ user privilege mappings.
The correspondence between the local privilege and the remote privilege is:
- The remote privilege is the privilege identifier value
- The local privilege is the mapped value(user, oper, admin)
Example: For the remote privilege 15, we have the index 16:
agTacacsUserMapCurCfgUId.16 = 15."
::= { agTacacsUserMapCurCfgTableEntry 2 }
agTacacsUserMapNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgTacacsUserMapNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of tacacs+ user map new configuration."
::= { agTacacsConfig 40 }
tacNewCfgDirectedRequest OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
restricted(2),
no-truncate(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable tacacs directed request."
::= { agTacacsConfig 41 }
tacCurCfgDirectedRequest OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
restricted(2),
no-truncate(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current tacacs directed request state."
::= { agTacacsConfig 42 }
agTacacsUserMapNewCfgTableEntry OBJECT-TYPE
SYNTAX AgTacacsUserMapNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the tacacs+ user mapping table."
INDEX { agTacacsUserMapNewCfgUId }
::= { agTacacsUserMapNewCfgTable 1 }
AgTacacsUserMapNewCfgTableEntry ::= SEQUENCE {
agTacacsUserMapNewCfgUId Integer32,
agTacacsUserMapNewCfgMapping INTEGER
}
agTacacsUserMapNewCfgUId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The new config remote privilege identifier.
The identifier value corresponds to the remote privilege."
::= { agTacacsUserMapNewCfgTableEntry 1 }
agTacacsUserMapNewCfgMapping OBJECT-TYPE
SYNTAX INTEGER {
none(0),
user(1),
oper(2),
admin(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set new Tacacs+ user privilege mappings.
The correspondence between the local privilege and the remote privilege is:
- The remote privilege is the privilege identifier value
- The local privilege is the mapped value(user, oper, admin)
Example: For the remote privilege 15, we have the index 16:
agTacacsUserMapNewCfgUId.16 = 15."
::= { agTacacsUserMapNewCfgTableEntry 2 }
tacCurCfgAttempts OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of login attempts to the TACACS+ server."
::= { agTacacsConfig 43 }
tacNewCfgAttempts OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of login attempts to the TACACS+ server."
::= { agTacacsConfig 44 }
tacCurBypassEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the enable bypass.If the status of this object
is enabled, user authenticated via TACACS+ with admin
previllage is granted enable previllage access.If disabled,
admin users will be provided with enable previllage access
based on enable password configured."
DEFVAL { enable }
::= { agTacacsConfig 45 }
tacNewBypassEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of the enable bypass.If the status of this object
is enabled, user authenticated via TACACS+ with admin
previllage is granted enable previllage access.If disabled,
admin users will be provided with enable previllage access
based on enable password configured."
DEFVAL { enable }
::= { agTacacsConfig 46 }
tacCurCfgEnableAccounting OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Current TACACS+ accounting state."
::= { agTacacsConfig 47 }
tacNewCfgEnableAccounting OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable TACACS+ accounting."
::= { agTacacsConfig 48 }
tacCurCfgSrcLoopIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the loopback interface that should be used
for the source IP of the Tacacs+ message; 0 means that
no loopback interface is used as the source of the Tacacs+ message."
::= { agTacacsConfig 49 }
tacNewCfgSrcLoopIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the loopback interface that should be used
for the source IP of the Tacacs+ message; 0 means that
no loopback interface is used as the source of the Tacacs+ message."
::= { agTacacsConfig 50 }
-- Multiple Management network MIB objects
agMgmtNetTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in the Management
Network Table."
::= { agMgmtNetConfig 1 }
agCurCfgMgmtNetTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgCurCfgMgmtNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table for Management Network definitions
in the current configuration block."
::= { agMgmtNetConfig 2 }
agCurCfgMgmtNetEntry OBJECT-TYPE
SYNTAX AgCurCfgMgmtNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the management network definition table."
INDEX { agCurCfgMgmtNetIndex }
::= { agCurCfgMgmtNetTable 1 }
AgCurCfgMgmtNetEntry ::= SEQUENCE {
agCurCfgMgmtNetIndex Integer32,
agCurCfgMgmtNetSubnet DisplayString,
agCurCfgMgmtNetMask DisplayString
}
agCurCfgMgmtNetIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Management Network Definition table."
::= { agCurCfgMgmtNetEntry 1 }
agCurCfgMgmtNetSubnet OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Management Network Address in the current configuration
block."
::= { agCurCfgMgmtNetEntry 2 }
agCurCfgMgmtNetMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Management Network Mask/Prefix Length in the current configuration
block."
::= { agCurCfgMgmtNetEntry 3 }
agNewCfgMgmtNetTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgNewCfgMgmtNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table for Management Network definitions
in the new configuration block."
::= { agMgmtNetConfig 3 }
agNewCfgMgmtNetEntry OBJECT-TYPE
SYNTAX AgNewCfgMgmtNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the management network definition table."
INDEX { agNewCfgMgmtNetIndex }
::= { agNewCfgMgmtNetTable 1 }
AgNewCfgMgmtNetEntry ::= SEQUENCE {
agNewCfgMgmtNetIndex Integer32,
agNewCfgMgmtNetSubnet DisplayString,
agNewCfgMgmtNetMask DisplayString,
agNewCfgMgmtNetDelete INTEGER
}
agNewCfgMgmtNetIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Management Network Definition table."
::= { agNewCfgMgmtNetEntry 1 }
agNewCfgMgmtNetSubnet OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Management Network Address in the new configuration
block."
::= { agNewCfgMgmtNetEntry 2 }
agNewCfgMgmtNetMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Management Network Mask/Prefix length in the new configuration
block."
::= { agNewCfgMgmtNetEntry 3 }
agNewCfgMgmtNetDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"By setting the value to delete(2), the entire row is deleted."
::= { agNewCfgMgmtNetEntry 4 }
agMgmtNetClear OBJECT-TYPE
SYNTAX INTEGER {
other(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"By setting the value to delete(2), the entire table is cleared."
::= { agMgmtNetConfig 4 }
-- Scheduled Reboot Group
agCfgBootResetParameters OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"String formatated as 'weekday hour minute'
where
- weekday is none(0),sunday(1),monday(2),
tuesday(3),wednesday(4),thursday(5),friday(6),
saturday(7)
- hour is the hour in 24-hour format for reboot
- minutes are the minutes [00] for reboot"
::= { agBoot 1 }
agCfgBootReset OBJECT-TYPE
SYNTAX INTEGER {
none(1),
cancel(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cancel pending switch reset."
::= { agBoot 4 }
agCfgBootNxtResetTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display the next scheduled reboot time."
::= { agBoot 5 }
agCfgBootPendingReset OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
pending(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows if there is any pending reboot scheduled.
You should cancel any pending reboot scheduled
before setting another."
::= { agBoot 6 }
agAccessUserMaxUserID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of User IDs."
::= { agAccess 1 }
agAccessCurStrongPassword OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of strong password."
::= { agAccess 4 }
agAccessNewStrongPassword OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to enabled(1) enables strong
password support, while disabled(0) disables it."
::= { agAccess 5 }
agAccessCurStrongPassValidity OBJECT-TYPE
SYNTAX INTEGER (1..365)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Password validity in days."
::= { agAccess 6 }
agAccessNewStrongPassValidity OBJECT-TYPE
SYNTAX INTEGER (1..365)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get or set password validity in days."
::= { agAccess 7 }
agAccessCurStrongPassWarning OBJECT-TYPE
SYNTAX INTEGER (1..365)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Warning days before password expires."
::= { agAccess 8 }
agAccessNewStrongPassWarning OBJECT-TYPE
SYNTAX INTEGER (1..365)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get or set warning days before password expires."
::= { agAccess 9 }
agAccessCurStrongPassFailLog OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of failed logins that trigger
security notifications."
::= { agAccess 10 }
agAccessNewStrongPassFailLog OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get or set number of failed logins that trigger
security notifications."
::= { agAccess 11 }
agAccessCurDefaultAdmin OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get default admin account state. (1) indicates enabled and (0) indicates
disabled (0). Default it is enabled."
::= { agAccess 12 }
agAccessNewDefaultAdmin OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to enabled (1) will enable the default admin account while
disabled (0) will disable the default admin account. Default it is enabled."
::= { agAccess 13 }
agAccessCurStrongPassLockout OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of Lockout"
::= { agAccess 14 }
agAccessNewStrongPassLockout OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to enabled (1) enables account locking after trying for failed login
attempts. While disabled (0) disables account locking."
::= { agAccess 15 }
agAccessCurStrongPassAttemptsMaxFail OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max number of failed logins before disabling account. Default value is 6"
::= { agAccess 16 }
agAccessNewStrongPassAttemptsMaxFail OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets Max number of failed logins before disabling account. Default value is 6"
::= { agAccess 17 }
agAccessUserCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgAccessUserCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Access user configuration."
::= { agAccess 2 }
agAccessUserCurCfgTableEntry OBJECT-TYPE
SYNTAX AgAccessUserCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Access user configuration table."
INDEX { agAccessUserCurCfgUId }
::= { agAccessUserCurCfgTable 1 }
AgAccessUserCurCfgTableEntry ::= SEQUENCE {
agAccessUserCurCfgUId Integer32,
agAccessUserCurCos INTEGER,
agAccessUserCurCfgName DisplayString,
agAccessUserCurCfgPswd DisplayString,
agAccessUserCurCfgState INTEGER
}
agAccessUserCurCfgUId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The User identifier."
::= { agAccessUserCurCfgTableEntry 1 }
agAccessUserCurCos OBJECT-TYPE
SYNTAX INTEGER {
user(0),
oper(3),
admin(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user class of service."
::= { agAccessUserCurCfgTableEntry 2 }
agAccessUserCurCfgName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user name. Please note, the max length is 8 in stacking mode."
::= { agAccessUserCurCfgTableEntry 3 }
agAccessUserCurCfgPswd OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The character string representing the user password."
::= { agAccessUserCurCfgTableEntry 4 }
agAccessUserCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User validation (enabled or disabled) in current
configuration block."
::= { agAccessUserCurCfgTableEntry 6 }
agAccessUserNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgAccessUserNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Access user configuration."
::= { agAccess 3 }
agAccessUserNewCfgTableEntry OBJECT-TYPE
SYNTAX AgAccessUserNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Access user configuration table."
INDEX { agAccessUserNewCfgUId }
::= { agAccessUserNewCfgTable 1 }
AgAccessUserNewCfgTableEntry ::= SEQUENCE {
agAccessUserNewCfgUId Integer32,
agAccessUserNewCos INTEGER,
agAccessUserNewCfgName DisplayString,
agAccessUserNewCfgPswd DisplayString,
agAccessUserNewCfgState INTEGER,
agAccessUserNewCfgDelete INTEGER
}
agAccessUserNewCfgUId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The User identifier."
::= { agAccessUserNewCfgTableEntry 1 }
agAccessUserNewCos OBJECT-TYPE
SYNTAX INTEGER {
user(0),
oper(3),
admin(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The user class of service."
::= { agAccessUserNewCfgTableEntry 2 }
agAccessUserNewCfgName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The user name. Please note, the max length is 8 in stacking mode."
::= { agAccessUserNewCfgTableEntry 3 }
agAccessUserNewCfgPswd OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The character string representing the user password."
::= { agAccessUserNewCfgTableEntry 4 }
agAccessUserNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"User validation (enabled or disabled) in new
configuration block."
::= { agAccessUserNewCfgTableEntry 7 }
agAccessUserNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is an action object to create or delete a User.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a User"
::= { agAccessUserNewCfgTableEntry 8 }
-- LDAP Configuration
ldapCurCfgPrimaryIpAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the Primary LDAP server,it can be an ipv4 or ipv6 address."
::= { agLdapConfig 1 }
ldapNewCfgPrimaryIpAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the Primary LDAP server,it can be an ipv4 or ipv6 address."
::= { agLdapConfig 2 }
ldapCurCfgSecondaryIpAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the Secondary LDAP server,it can be an ipv4 or ipv6 address."
::= { agLdapConfig 3 }
ldapNewCfgSecondaryIpAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the Secondary LDAP server,it can be an ipv4 or ipv6 address."
::= { agLdapConfig 4 }
ldapCurCfgPort OBJECT-TYPE
SYNTAX INTEGER (1..65000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the LDAP port number."
::= { agLdapConfig 5 }
ldapNewCfgPort OBJECT-TYPE
SYNTAX INTEGER (1..65000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the LDAP port number."
::= { agLdapConfig 6 }
ldapCurCfgRetries OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of retries to the LDAP server."
::= { agLdapConfig 7 }
ldapNewCfgRetries OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of retries to the LDAP server."
::= { agLdapConfig 8 }
ldapCurCfgTimeout OBJECT-TYPE
SYNTAX INTEGER (4..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of seconds before resending authentication
to LDAP server."
::= { agLdapConfig 9 }
ldapNewCfgTimeout OBJECT-TYPE
SYNTAX INTEGER (4..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of seconds before resending authentication
to LDAP server."
::= { agLdapConfig 10 }
ldapCurCfgDomain OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LDAP domain name."
::= { agLdapConfig 11 }
ldapNewCfgDomain OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LDAP domain name."
::= { agLdapConfig 12 }
ldapCurCfgBackdoor OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable LDAP backdoor for telnet/ssh/http/https."
::= { agLdapConfig 13 }
ldapNewCfgBackdoor OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable LDAP backdoor for telnet/ssh/http/https."
::= { agLdapConfig 14 }
ldapCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable LDAP authentication."
::= { agLdapConfig 15 }
ldapNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable LDAP authentication."
::= { agLdapConfig 16 }
ldapCurCfgPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify whether the LDAP should be performed over the
data port or the management port."
::= { agLdapConfig 17 }
ldapNewCfgPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether the LDAP should be performed over the
data port or the management port."
::= { agLdapConfig 18 }
ldapCurCfgSecPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify whether the LDAP should be performed over the
data port or the management port."
::= { agLdapConfig 19 }
ldapNewCfgSecPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgta(2),
mgtb(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether the LDAP should be performed over the
data port or the management port."
::= { agLdapConfig 20 }
ldapCurCfgUserNameAttribute OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LDAP username attribute."
::= { agLdapConfig 21 }
ldapNewCfgUserNameAttribute OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LDAP username attribute (default = uid)."
::= { agLdapConfig 22 }
-- sFlow Group
sflowCurCfgServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the sFlow server."
::= { agsFlowConfig 1 }
sflowNewCfgServerAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..46))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the sFlow server."
::= { agsFlowConfig 2 }
sflowCurCfgServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the sFlow server port number."
::= { agsFlowConfig 3 }
sflowNewCfgServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the sFlow server port number."
::= { agsFlowConfig 4 }
sflowCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable sFlow."
::= { agsFlowConfig 5 }
sflowNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable sFlow"
::= { agsFlowConfig 6 }
sflowCurPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SflowCurPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of sFlow port configuration."
::= { agsFlowConfig 7 }
sflowCurPortCfgTableEntry OBJECT-TYPE
SYNTAX SflowCurPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the sFlow port configuration table."
INDEX { sflowCurPortCfgTableId }
::= { sflowCurPortCfgTable 1 }
SflowCurPortCfgTableEntry ::= SEQUENCE {
sflowCurPortCfgTableId PortNumber,
sflowCurPortSampling INTEGER,
sflowCurPortPolling INTEGER
}
sflowCurPortCfgTableId OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"sFlow port number."
::= { sflowCurPortCfgTableEntry 1 }
sflowCurPortSampling OBJECT-TYPE
SYNTAX INTEGER (256..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current sFlow port sampling rate."
::= { sflowCurPortCfgTableEntry 2 }
sflowCurPortPolling OBJECT-TYPE
SYNTAX INTEGER (5..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current sFlow port polling interval."
::= { sflowCurPortCfgTableEntry 3 }
sflowNewPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SflowNewPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of sFlow port configuration."
::= { agsFlowConfig 8 }
sflowNewPortCfgTableEntry OBJECT-TYPE
SYNTAX SflowNewPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the sFlow port configuration table."
INDEX { sflowNewPortCfgTableId }
::= { sflowNewPortCfgTable 1 }
SflowNewPortCfgTableEntry ::= SEQUENCE {
sflowNewPortCfgTableId PortNumber,
sflowNewPortSampling INTEGER,
sflowNewPortPolling INTEGER
}
sflowNewPortCfgTableId OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" sFlow port number."
::= { sflowNewPortCfgTableEntry 1 }
sflowNewPortSampling OBJECT-TYPE
SYNTAX INTEGER (1..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The new sFlow port sampling rate.
Valid range: 1-16777215| 0 for disable"
::= { sflowNewPortCfgTableEntry 2 }
sflowNewPortPolling OBJECT-TYPE
SYNTAX INTEGER (5..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The new sFlow port polling interval.
Valid range: 5-60| 0 for disable"
::= { sflowNewPortCfgTableEntry 3 }
sflowCurCfgMgmtPort OBJECT-TYPE
SYNTAX INTEGER {
data(1)
,
mgta(2),
mgtb(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port that the sFlow server is connected to"
::= { agsFlowConfig 9 }
sflowNewCfgMgmtPort OBJECT-TYPE
SYNTAX INTEGER {
data(1)
,
mgta(2),
mgtb(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Chose the port that the sFlow server will connect to"
::= { agsFlowConfig 10 }
-- Statistics Group
-- Packet Statistics Group
-- This group represents Packet Statistics information
pktStatsAllocs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocations from the packet buffer pool by
the TCP/IP protocol stack."
::= { pktStats 1 }
pktStatsFrees OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of times the packet buffers are freed(released) to the
packet buffer pool by the TCP/IP protocol stack."
::= { pktStats 2 }
pktStatsAllocFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocation failures from the packet buffer
pool by the TCP/IP protocol stack."
::= { pktStats 3}
pktStatsMediums OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocations with size greater than 128 bytes
and less than or equal to 1536 bytes from the packet buffer pool by
the TCP/IP protocol stack."
::= { pktStats 4}
pktStatsJumbos OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocations with size larger than 1536 bytes
from the packet buffer pool by the TCP/IP protocol stack."
::= { pktStats 5}
pktStatsSmalls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocations with size less than or eqaul to
128 bytes from the packet buffer pool by the TCP/IP protocol stack."
::= { pktStats 6}
pktStatsMediumsHiWatermark OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of packet allocations with size greater than
128 bytes and less than or equal to 1536 bytes from the packet
buffer pool by the TCP/IP protocol stack."
::= { pktStats 7}
pktStatsJumbosHiWatermark OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of packet allocations with size larger than
1536 bytes from the packet buffer pool by the TCP/IP protocol stack."
::= { pktStats 8}
pktStatsSmallsHiWatermark OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of packet allocations with size less than or
equal to 128 bytes from the packet buffer pool by the TCP/IP
protocol stack."
::= { pktStats 9}
-- MP CPU Statisitics Group
mpCpuStatsUtil1Second OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 1 second. It shows the percentage."
::= { mpCpuStats 1 }
mpCpuStatsUtil5Seconds OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 5 seconds. It shows the percentage."
::= { mpCpuStats 2 }
mpCpuStatsUtil1Minute OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 1 minute. It shows the percentage."
::= { mpCpuStats 3 }
mpCpuStatsUtil5Minutes OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 5 minutes. It shows the percentage."
::= { mpCpuStats 6 }
-- Stats for per thread CPU utilization
cpuUtilProcessStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpuUtilProcessStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CPU utilization per process statistics."
::= { mpCpuStats 5 }
cpuUtilProcessStatsTableEntry OBJECT-TYPE
SYNTAX CpuUtilProcessStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the CPU utilization stats per process table."
INDEX { processId }
::= { cpuUtilProcessStatsTable 1 }
CpuUtilProcessStatsTableEntry ::=
SEQUENCE {
processId
Integer32,
processName
DisplayString,
cpuProcessUtil1Sec
DisplayString,
cpuProcessUtil5Sec
DisplayString,
cpuProcessUtil1Min
DisplayString,
cpuProcessUtil5Min
DisplayString,
processStatus
DisplayString
}
processId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The process ID."
::= { cpuUtilProcessStatsTableEntry 1 }
processName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Process Name."
::= { cpuUtilProcessStatsTableEntry 2 }
cpuProcessUtil1Sec OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 1 second.
It shows the percentage."
::= { cpuUtilProcessStatsTableEntry 3 }
cpuProcessUtil5Sec OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 5 seconds.
It shows the percentage."
::= { cpuUtilProcessStatsTableEntry 4 }
cpuProcessUtil1Min OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 1 min.
It shows the percentage."
::= { cpuUtilProcessStatsTableEntry 5 }
cpuProcessUtil5Min OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 5 min.
It shows the percentage."
::= { cpuUtilProcessStatsTableEntry 6 }
processStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Process Status"
::= { cpuUtilProcessStatsTableEntry 7 }
--
-- Port statistics table
--
portStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port statistics."
::= { portStats 1 }
portStatsTableEntry OBJECT-TYPE
SYNTAX PortStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port stats table."
INDEX { portStatsIndx }
::= { portStatsTable 1 }
PortStatsTableEntry ::=
SEQUENCE {
portStatsIndx
PortNumber,
portStatsPhyIfInOctets
Counter32,
portStatsPhyIfInUcastPkts
Counter32,
portStatsPhyIfInNUcastPkts
Counter32,
portStatsPhyIfInDiscards
Counter32,
portStatsPhyIfInErrors
Counter32,
portStatsPhyIfInUnknownProtos
Counter32,
portStatsPhyIfOutOctets
Counter32,
portStatsPhyIfOutUcastPkts
Counter32,
portStatsPhyIfOutNUcastPkts
Counter32,
portStatsPhyIfOutDiscards
Counter32,
portStatsPhyIfOutErrors
Counter32,
portStatsPhyIfOutQLen
Gauge32,
portStatsPhyIfInBroadcastPkts
Counter32,
portStatsPhyIfOutBroadcastPkts
Counter32,
portStatsPhyIfInMulticastPkts
Counter32,
portStatsPhyIfOutMulticastPkts
Counter32,
portStatsClear
INTEGER
,portStatsLinkStateChange
Counter32
,portStatsPhyIfInFctlPkts
Counter32
,portStatsPhyIfOutFctlPkts
Counter32
,portStatsPhyIfInFctlPktsRate
Counter32
,portStatsPhyIfOutFctlPktsRate
Counter32
,portStatsDot1PortInFrames
Counter32
,portStatsDot1PortOutFrames
Counter32
,portStatsDot1PortInDiscards
Counter32
,portStatsDot1TpLearnedEntryDiscards
Counter32
,portStatsDot1StpPortForwardTransitions
Counter32
}
tcpControlBlocksTable OBJECT-TYPE
SYNTAX SEQUENCE OF TcpControlBlocksTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"All TCP allocated control blocks "
::= { mpTcbStats 1 }
tcpControlBlocksTableEntry OBJECT-TYPE
SYNTAX TcpControlBlocksTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the TCP control blocks table. "
INDEX { tcpControlBlocksIndx }
::= { tcpControlBlocksTable 1 }
TcpControlBlocksTableEntry ::=
SEQUENCE {
tcpControlBlocksIndx
Integer32,
destAddr
DisplayString,
remotePort
Gauge32,
sourceAddr
DisplayString,
localPort
Gauge32,
portType
DisplayString,
portState
DisplayString,
state
DisplayString
}
tcpControlBlocksIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP blocks index."
::= { tcpControlBlocksTableEntry 1 }
destAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP block destination address."
::= { tcpControlBlocksTableEntry 2 }
remotePort OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tcp informations concerning the remote port"
::= { tcpControlBlocksTableEntry 3}
sourceAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address of the source of the Tcp block"
::= { tcpControlBlocksTableEntry 4}
localPort OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tcp informations concerning the local port"
::= { tcpControlBlocksTableEntry 5}
portType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the local port"
::= { tcpControlBlocksTableEntry 7 }
portState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The state of the local port"
::= { tcpControlBlocksTableEntry 8 }
state OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the Tcp"
::= { tcpControlBlocksTableEntry 6 }
tcpMGMTControlBlocksTable OBJECT-TYPE
SYNTAX SEQUENCE OF TcpMGMTTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"All TCP allocated control blocks on MGMT port"
::= { mpTcbStats 2 }
tcpMGMTTableEntry OBJECT-TYPE
SYNTAX TcpMGMTTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A row in the TCP on MGMT port table. "
INDEX { tcpMGMTIndx }
::= { tcpMGMTControlBlocksTable 1 }
TcpMGMTTableEntry ::=
SEQUENCE {
tcpMGMTIndx
Integer32,
recvQ
Integer32,
sentQ
Integer32,
localAddress
DisplayString,
foreignAddress
DisplayString,
stateMgmt
DisplayString
}
tcpMGMTIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Index in the tcpMGMTControlBlocksTable table."
::= { tcpMGMTTableEntry 1 }
recvQ OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the received TCP queue."
::= { tcpMGMTTableEntry 2 }
sentQ OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the sent TCP blocks queue."
::= { tcpMGMTTableEntry 3 }
localAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local address for the TCP."
::= { tcpMGMTTableEntry 4 }
foreignAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote address for the TCP."
::= { tcpMGMTTableEntry 5 }
stateMgmt OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's state."
::= { tcpMGMTTableEntry 6 }
udpControlBlocksTable OBJECT-TYPE
SYNTAX SEQUENCE OF UdpControlBlocksTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"All UDP control blocks in use"
::= { mpUdpStats 1 }
udpControlBlocksTableEntry OBJECT-TYPE
SYNTAX UdpControlBlocksTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the UDP control blocks table. "
INDEX { udpMpLocalPort }
::= { udpControlBlocksTable 1 }
UdpControlBlocksTableEntry ::=
SEQUENCE {
udpMpLocalPort
Integer32,
udpMpState
DisplayString
}
udpMpLocalPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current UDP local port."
::= { udpControlBlocksTableEntry 1 }
udpMpState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The port's state. "
::= { udpControlBlocksTableEntry 2 }
udpMGMTControlBlocksTable OBJECT-TYPE
SYNTAX SEQUENCE OF UdpMGMTTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"All UDP control blocks allocated on MGMT port"
::= { mpUdpStats 2 }
udpMGMTTableEntry OBJECT-TYPE
SYNTAX UdpMGMTTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A row in the UDP on MGMT port table. "
INDEX { udpMGMTIndx }
::= { udpMGMTControlBlocksTable 1 }
UdpMGMTTableEntry ::=
SEQUENCE {
udpMGMTIndx
Integer32,
recvQUdp
Integer32,
sentQUdp
Integer32,
localAddressUdp
DisplayString,
foreignAddressUdp
DisplayString,
stateMgmtUdp
DisplayString
}
udpMGMTIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Index in the udpMGMTControlBlocksTable table."
::= { udpMGMTTableEntry 1 }
recvQUdp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the received UDP queue."
::= { udpMGMTTableEntry 2 }
sentQUdp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the sent UDP blocks queue."
::= { udpMGMTTableEntry 3 }
localAddressUdp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local address for the UDP."
::= { udpMGMTTableEntry 4 }
foreignAddressUdp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote address for the UDP."
::= { udpMGMTTableEntry 5 }
stateMgmtUdp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's state."
::= { udpMGMTTableEntry 6 }
portStatsIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { portStatsTableEntry 1 }
portStatsPhyIfInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on the
interface, including framing characters."
::= { portStatsTableEntry 2 }
portStatsPhyIfInUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of subnetwork-unicast packets
delivered to a higher-layer protocol."
::= { portStatsTableEntry 3 }
portStatsPhyIfInNUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol."
::= { portStatsTableEntry 4 }
portStatsPhyIfInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet could be to free up
buffer space."
::= { portStatsTableEntry 5 }
portStatsPhyIfInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol."
::= { portStatsTableEntry 6 }
portStatsPhyIfInUnknownProtos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol."
::= { portStatsTableEntry 7 }
portStatsPhyIfOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted out of the
interface, including framing characters."
::= { portStatsTableEntry 8 }
portStatsPhyIfOutUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent."
::= { portStatsTableEntry 9 }
portStatsPhyIfOutNUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent."
::= { portStatsTableEntry 10 }
portStatsPhyIfOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer space."
::= { portStatsTableEntry 11 }
portStatsPhyIfOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets that could not be
transmitted because of errors."
::= { portStatsTableEntry 12 }
portStatsPhyIfOutQLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the output packet queue (in
packets)."
::= { portStatsTableEntry 13 }
portStatsPhyIfInBroadcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer."
::= { portStatsTableEntry 14 }
portStatsPhyIfOutBroadcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were discarded or not sent."
::= { portStatsTableEntry 15 }
portStatsPhyIfInMulticastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer."
::= { portStatsTableEntry 17 }
portStatsPhyIfOutMulticastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast address at this sub-layer,
including those that were discarded or not sent."
::= { portStatsTableEntry 18 }
portStatsClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the stats for this port."
::= { portStatsTableEntry 16 }
portStatsLinkStateChange OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of link state changes."
::= { portStatsTableEntry 20 }
portStatsPhyIfInFctlPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound flow control packets."
::= { portStatsTableEntry 21 }
portStatsPhyIfOutFctlPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound flow control packets."
::= { portStatsTableEntry 22 }
portStatsPhyIfInFctlPktsRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound flow control packets per second."
::= { portStatsTableEntry 23 }
portStatsPhyIfOutFctlPktsRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound flow control packets per second."
::= { portStatsTableEntry 24 }
portStatsDot1PortInFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IN frames per port."
::= { portStatsTableEntry 31 }
portStatsDot1PortOutFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OUT frames per port."
::= { portStatsTableEntry 32 }
portStatsDot1PortInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IN packets discarded per port."
::= { portStatsTableEntry 33 }
portStatsDot1TpLearnedEntryDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Dot1Tp learned entries discarded."
::= { portStatsTableEntry 34 }
portStatsDot1StpPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transitions ...."
::= { portStatsTableEntry 35 }
portMgmtStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortMgmtStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port statistics."
::= { portStats 3 }
portMgmtStatsTableEntry OBJECT-TYPE
SYNTAX PortMgmtStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the management port stats table."
INDEX { portMgmtStatsIndx }
::= { portMgmtStatsTable 1 }
PortMgmtStatsTableEntry ::=
SEQUENCE {
portMgmtStatsIndx
Integer32,
portMgmtStatsRxBytes
Counter32,
portMgmtStatsTxBytes
Counter32,
portMgmtStatsRxpackets
Counter32,
portMgmtStatsTxpackets
Counter32,
portMgmtStatsRxErrors
Counter32,
portMgmtStatsTxErrors
Counter32,
portMgmtStatsRxDropped
Counter32,
portMgmtStatsTxDropped
Counter32,
portMgmtStatsRxOverruns
Counter32,
portMgmtStatsTxOverruns
Counter32,
portMgmtStatsRxFrame
Counter32,
portMgmtStatsTxCarrier
Counter32,
portMgmtStatsRxMulticast
Counter32,
portMgmtStatsTxCollisions
Counter32
}
portMgmtStatsIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management port index."
::= { portMgmtStatsTableEntry 1 }
portMgmtStatsRxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes received."
::= { portMgmtStatsTableEntry 2 }
portMgmtStatsTxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes transmitted."
::= { portMgmtStatsTableEntry 3 }
portMgmtStatsRxpackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocations from the packet buffer pool by
the TCP/IP protocol stack."
::= { portMgmtStatsTableEntry 4 }
portMgmtStatsTxpackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocations from the packet buffer pool by
the TCP/IP protocol stack."
::= { portMgmtStatsTableEntry 5 }
portMgmtStatsRxErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol."
::= { portMgmtStatsTableEntry 6 }
portMgmtStatsTxErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol."
::= { portMgmtStatsTableEntry 7 }
portMgmtStatsRxDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets that were dropped."
::= { portMgmtStatsTableEntry 8 }
portMgmtStatsTxDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets that were dropped."
::= { portMgmtStatsTableEntry 9 }
portMgmtStatsRxOverruns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of data overruns over this link."
::= { portMgmtStatsTableEntry 10 }
portMgmtStatsTxOverruns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of data overruns over this link."
::= { portMgmtStatsTableEntry 11 }
portMgmtStatsRxFrame OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received on this link."
::= { portMgmtStatsTableEntry 12 }
portMgmtStatsTxCarrier OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that the carrier sense
condition was lost or never asserted when
attempting to transmit a frame on a this
interface."
::= { portMgmtStatsTableEntry 13 }
portMgmtStatsRxMulticast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast packets received."
::= { portMgmtStatsTableEntry 14 }
portMgmtStatsTxCollisions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of collisions on this outbound segment."
::= { portMgmtStatsTableEntry 15 }
allportsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AllportsStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of all ports statistics."
::= { portStats 4 }
allportsStatsTableEntry OBJECT-TYPE
SYNTAX AllportsStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table of all ports statistics."
INDEX { allportsStatsIndx }
::= { allportsStatsTable 1 }
AllportsStatsTableEntry ::=
SEQUENCE {
allportsStatsIndx PortNumber,
allportsStatsDescr DisplayString,
allportsStatsSpeed INTEGER,
allportsStatsPhysAddress PhysAddress,
allportsStatsAdminStatus INTEGER,
allportsStatsOperStatus INTEGER,
allportsStatsInOctets Counter32,
allportsStatsOutOctets Counter32,
allportsStatsInPkts Counter32,
allportsStatsOutPkts Counter32,
allportsStatsInUcast DisplayString,
allportsStatsOutUcast DisplayString,
allportsStatsInBcast DisplayString,
allportsStatsOutBcast DisplayString,
allportsStatsInMcast DisplayString,
allportsStatsOutMcast DisplayString,
allportsStatsInDiscards Counter32,
allportsStatsOutDiscards Counter32,
allportsStatsInErrors Counter32,
allportsStatsOutErrors Counter32,
allportsStatsInUnknownProtos DisplayString,
allportsStatsOutQLen DisplayString
,
allportsStatsLinkStateChange Counter32
,
allportsStatsInOctetsRate Counter32,
allportsStatsOutOctetsRate Counter32,
allportsStatsInUcastRate DisplayString,
allportsStatsOutUcastRate DisplayString,
allportsStatsInBcastRate DisplayString,
allportsStatsOutBcastRate DisplayString,
allportsStatsInMcastRate DisplayString,
allportsStatsOutMcastRate DisplayString,
allportsStatsInDiscardsRate Counter32,
allportsStatsOutDiscardsRate Counter32,
allportsStatsInErrorsRate Counter32,
allportsStatsOutErrorsRate Counter32
}
allportsStatsIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number."
::= { allportsStatsTableEntry 1 }
allportsStatsDescr OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..7))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port description."
::= { allportsStatsTableEntry 2 }
allportsStatsSpeed OBJECT-TYPE
SYNTAX INTEGER {
mbs10(2),
mbs100(3),
mbs1000(4),
any(5)
,
mbs10000(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational speed of the port."
::= { allportsStatsTableEntry 3 }
allportsStatsPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port MAC Address."
::= { allportsStatsTableEntry 4 }
allportsStatsAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port Admin state."
::= { allportsStatsTableEntry 5 }
allportsStatsOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port Operational Status."
::= { allportsStatsTableEntry 6 }
allportsStatsInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Octets In for port."
::= { allportsStatsTableEntry 7 }
allportsStatsOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Octets Out for port."
::= { allportsStatsTableEntry 8 }
allportsStatsInPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets In for port."
::= { allportsStatsTableEntry 9 }
allportsStatsOutPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets Out for port."
::= { allportsStatsTableEntry 10 }
allportsStatsInUcast OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unicast Packets In for port."
::= { allportsStatsTableEntry 11 }
allportsStatsOutUcast OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unicast Packets Out for port."
::= { allportsStatsTableEntry 12 }
allportsStatsInBcast OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Broadcasts Packets In for port."
::= { allportsStatsTableEntry 13 }
allportsStatsOutBcast OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Broadcasts Packets Out for port."
::= { allportsStatsTableEntry 14 }
allportsStatsInMcast OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast Packets In for port."
::= { allportsStatsTableEntry 15 }
allportsStatsOutMcast OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast Packets Out for port."
::= { allportsStatsTableEntry 16 }
allportsStatsInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Discarded Packets for port."
::= { allportsStatsTableEntry 17 }
allportsStatsOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Outbound Packets for port."
::= { allportsStatsTableEntry 18 }
allportsStatsInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error Packets for port."
::= { allportsStatsTableEntry 19 }
allportsStatsOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Not sent packets due to error."
::= { allportsStatsTableEntry 20 }
allportsStatsInUnknownProtos OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unknown protocol packets."
::= { allportsStatsTableEntry 21 }
allportsStatsOutQLen OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Outbound Packet Queue Length."
::= { allportsStatsTableEntry 22 }
allportsStatsLinkStateChange OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of link state changes."
::= { allportsStatsTableEntry 26 }
allportsStatsInOctetsRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Octets In rate for port."
::= { allportsStatsTableEntry 30 }
allportsStatsOutOctetsRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Octets Out rate for port."
::= { allportsStatsTableEntry 31 }
allportsStatsInUcastRate OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unicast Packets In rate for port."
::= { allportsStatsTableEntry 32 }
allportsStatsOutUcastRate OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unicast Packets Out rate for port."
::= { allportsStatsTableEntry 33 }
allportsStatsInBcastRate OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Broadcasts Packets In rate for port."
::= { allportsStatsTableEntry 34 }
allportsStatsOutBcastRate OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Broadcasts Packets Out rate for port."
::= { allportsStatsTableEntry 35 }
allportsStatsInMcastRate OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast Packets In rate for port."
::= { allportsStatsTableEntry 36 }
allportsStatsOutMcastRate OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast Packets Out rate for port."
::= { allportsStatsTableEntry 37 }
allportsStatsInDiscardsRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Discarded In Packets rate for port."
::= { allportsStatsTableEntry 38 }
allportsStatsOutDiscardsRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Discarded Out Packets rate for port."
::= { allportsStatsTableEntry 39 }
allportsStatsInErrorsRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Erroneus inbound packets rate for port."
::= { allportsStatsTableEntry 40 }
allportsStatsOutErrorsRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Not sent packets due to error rate."
::= { allportsStatsTableEntry 41 }
clearPortsStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the statistics for all ports."
::= { portStats 6 }
dot1RateStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1RateStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of bridging statistics per second."
::= { portStats 7}
dot1RateStatsTableEntry OBJECT-TYPE
SYNTAX Dot1RateStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Bridging statistics per second."
INDEX { dot1RateStatsIndx }
::= { dot1RateStatsTable 1 }
Dot1RateStatsTableEntry ::= SEQUENCE {
dot1RateStatsIndx PortNumber,
dot1RatePortInFrames Counter32,
dot1RatePortOutFrames Counter32,
dot1RatePortInDiscards Counter32,
dot1RateTpLearnedEntryDiscards Counter32
,dot1RateStpPortForwardTransitions Counter32
}
dot1RateStatsIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { dot1RateStatsTableEntry 1 }
dot1RatePortInFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that have been received
per second by this port from its segment."
::= { dot1RateStatsTableEntry 2 }
dot1RatePortOutFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that have been transmitted
per second by this port to its segment."
::= { dot1RateStatsTableEntry 3 }
dot1RatePortInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of valid frames received which were
discarded per second."
::= { dot1RateStatsTableEntry 4 }
dot1RateTpLearnedEntryDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number per second of Forwarding Database
entries, which have been or would have been
learnt, but have been discarded due to a lack
of space to store them."
::= { dot1RateStatsTableEntry 5 }
dot1RateStpPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this port has transitioned
per second from the Learning state to the
Forwarding state."
::= { dot1RateStatsTableEntry 8 }
dot3RateStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot3RateStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Ethernet statistics per second."
::= { portStats 8}
dot3RateStatsTableEntry OBJECT-TYPE
SYNTAX Dot3RateStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ethernet statistics per second."
INDEX { dot3RateStatsIndx }
::= { dot3RateStatsTable 1 }
Dot3RateStatsTableEntry ::= SEQUENCE {
dot3RateStatsIndx PortNumber,
dot3RateStatsAlignmentErrors Counter32,
dot3RateStatsFCSErrors Counter32,
dot3RateStatsSingleCollisionFrames Counter32,
dot3RateStatsMultipleCollisionFrames Counter32,
dot3RateStatsLateCollisions Counter32,
dot3RateStatsExcessiveCollisions Counter32,
dot3RateStatsInternalMacTransmitErrors Counter32,
dot3RateStatsFrameTooLongs Counter32,
dot3RateStatsInternalMacReceiveErrors Counter32
}
dot3RateStatsIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { dot3RateStatsTableEntry 1 }
dot3RateStatsAlignmentErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames received per second on a particular
interface that are not an integral number of octets
in length and do not pass the FCS check."
::= { dot3RateStatsTableEntry 2 }
dot3RateStatsFCSErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames received per second on a particular
interface that are an integral number of octets
in length but do not pass the FCS check."
::= { dot3RateStatsTableEntry 3 }
dot3RateStatsSingleCollisionFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of successfully transmitted frames per second
on a particular interface for which transmission is
inhibited by exactly one collision."
::= { dot3RateStatsTableEntry 4 }
dot3RateStatsMultipleCollisionFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of successfully transmitted frames per second
on a particular interface for which transmission is
inhibited by more than one collision."
::= { dot3RateStatsTableEntry 5 }
dot3RateStatsLateCollisions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times per second that a collision
is detected on a particular interface later than
512 bit-times into the transmission of a packet."
::= { dot3RateStatsTableEntry 8 }
dot3RateStatsExcessiveCollisions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count per second of frames for which
transmission on a particular interface fails
due to excessive collisions."
::= { dot3RateStatsTableEntry 9 }
dot3RateStatsInternalMacTransmitErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count per second of frames for which transmission
on a particular interface fails due to an internal
MAC sublayer transmit error."
::= { dot3RateStatsTableEntry 10 }
dot3RateStatsFrameTooLongs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count per second of frames received on a particular
interface that exceed the maximum permitted frame size."
::= { dot3RateStatsTableEntry 12 }
dot3RateStatsInternalMacReceiveErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count per second of frames for which reception on
a particular interface fails due to an internal MAC
sublayer receive error."
::= { dot3RateStatsTableEntry 13 }
-- NTP Statisitics
ntpPrimaryServerReqSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTP requests sent to Primary NTP Server."
::= { ntpStats 1 }
ntpPrimaryServerRespRcvd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTP responces received from Primary NTP Server."
::= { ntpStats 2 }
ntpPrimaryServerUpdates OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTP Updates by Primary NTP Server."
::= { ntpStats 3 }
ntpSecondaryServerReqSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTP requests sent to Secondary NTP Server."
::= { ntpStats 4 }
ntpSecondaryServerRespRcvd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTP responces received from Secondary NTP Server."
::= { ntpStats 5 }
ntpSecondaryServerUpdates OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTP Updates by Secondary NTP Server."
::= { ntpStats 6 }
ntpLastUpdateServer OBJECT-TYPE
SYNTAX INTEGER {
none(0),
primary(1),
secondary(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of ntp server updated last time."
::= { ntpStats 7 }
ntpLastUpdateTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last time updated by ntp server."
::= { ntpStats 8 }
ntpClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the stats for ntp."
::= { ntpStats 9 }
ntpSystemCurrentTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current system time."
::= { ntpStats 10 }
aclStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of ACL statistics."
::= { aclStats 1 }
aclStatsTableEntry OBJECT-TYPE
SYNTAX AclStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics about a particular ACL configuration entry."
INDEX { aclStatsIndex }
::= { aclStatsTable 1 }
AclStatsTableEntry ::= SEQUENCE {
aclStatsIndex Integer32,
aclStatsHits Counter32,
aclClearStats INTEGER
}
aclStatsIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The acl index."
::= { aclStatsTableEntry 1 }
aclStatsHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of hits for this ACL entry"
::= { aclStatsTableEntry 2 }
aclClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the stats for the ACL."
::= { aclStatsTableEntry 3 }
vmapStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmapStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VMAP statistics."
::= { aclStats 2 }
vmapStatsTableEntry OBJECT-TYPE
SYNTAX VmapStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics about a particular VMAP configuration entry."
INDEX { vmapStatsIndex }
::= { vmapStatsTable 1 }
VmapStatsTableEntry ::= SEQUENCE {
vmapStatsIndex Integer32,
vmapStatsHits Counter32,
vmapClearStats INTEGER
}
vmapStatsIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vmap index."
::= { vmapStatsTableEntry 1 }
vmapStatsHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of hits for this VMAP entry"
::= { vmapStatsTableEntry 2 }
vmapClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the stats for the VMAP."
::= { vmapStatsTableEntry 3 }
acl6StatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Acl6StatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IPv6 ACL statistics."
::= { aclStats 3 }
acl6StatsTableEntry OBJECT-TYPE
SYNTAX Acl6StatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics about a particular IPv6 ACL configuration entry."
INDEX { aclStatsIndex }
::= { acl6StatsTable 1 }
Acl6StatsTableEntry ::= SEQUENCE {
acl6StatsIndex Integer32,
acl6StatsHits Counter32,
acl6ClearStats INTEGER
}
acl6StatsIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ipv6 acl index."
::= { acl6StatsTableEntry 1 }
acl6StatsHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of hits for this IPv6 ACL entry"
::= { acl6StatsTableEntry 2 }
acl6ClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the stats for the IPv6 ACL."
::= { acl6StatsTableEntry 3 }
-- Clear Statistics
snmpClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the SNMP statistics."
::= { agClearStats 1 }
agDiffState OBJECT-TYPE
SYNTAX INTEGER {
diff(1),
flashdiff(2),
idle(3),
inprogress(4),
complete(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is read the current state is returned.
idle(3) indicates that there is no diff in progess.
complete(5) indicates that the last diff operation is completed.
Setting the value to diff(1), will start a new diff operation
Diff compares the new configuration with the current configuration
and shows the pending configuration changes.
Setting the value to flashdiff(1), will start a new diff operation.
flashdiff compares new configuration with the flash configuration.
To read the configuration changes use the agDiffTable once the
state of this variable returns complete.
Once the agDiffTable is read the state should be set back to 'idle'
which frees the diff buffer and others can issue a diff command via
SNMP."
::= { agDiff 2 }
agDiffTableSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of strings in the diff table."
::= { agDiff 3 }
agDiffTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgDiffTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of diff strings."
::= { agDiff 4 }
agDiffTableEntry OBJECT-TYPE
SYNTAX AgDiffTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the diff table."
INDEX { agDiffIndex }
::= { agDiffTable 1 }
AgDiffTableEntry ::= SEQUENCE {
agDiffIndex Integer32,
agDiffString OCTET STRING
}
agDiffIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The table index."
::= { agDiffTableEntry 1 }
agDiffString OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string in the diff table."
::= { agDiffTableEntry 2 }
-- Config Dump
agCfgDumpState OBJECT-TYPE
SYNTAX INTEGER {
dump(1),
idle(2),
inprogress(3),
complete(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is read the current state is returned.
idle(2) indicates that there is no dump in progess.
complete(4) indicates that the last dump operation is completed.
Setting the value to dump(1), will start a new dump operation
Dump will show the current configuration.
To read the configuration dump use the agCfgDumpTable once the
state of this variable returns complete.
Once the agCfgDumpTable is read the state should be set back to
'idle' which frees the dump buffer and others can issue a dump
command via SNMP."
::= { agCfgDump 2 }
agCfgDumpTableSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of strings in the dump table."
::= { agCfgDump 3 }
agCfgDumpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgCfgDumpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of dump strings."
::= { agCfgDump 4 }
agCfgDumpTableEntry OBJECT-TYPE
SYNTAX AgCfgDumpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dump table."
INDEX { agCfgDumpIndex }
::= { agCfgDumpTable 1 }
AgCfgDumpTableEntry ::= SEQUENCE {
agCfgDumpIndex Integer32,
agCfgDumpString OCTET STRING
}
agCfgDumpIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The table index."
::= { agCfgDumpTableEntry 1 }
agCfgDumpString OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string in the dump table."
::= { agCfgDumpTableEntry 2 }
-- Memory Statisitics Group
totalMemoryStats OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total memory in bytes."
::= { memoryStats 1}
memoryFreeStats OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The free memory in bytes."
::= { memoryStats 2}
memorySharedStats OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The shared memory in bytes."
::= { memoryStats 3}
memoryBufferStats OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The buffer memory in bytes."
::= { memoryStats 4}
swapTotalStats OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total swap memory in bytes."
::= { memoryStats 5}
swapFreeStats OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The free swap memory in bytes."
::= { memoryStats 6}
highTotalStats OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total high memory in bytes."
::= { memoryStats 7}
highFreeStats OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The free high memory in bytes."
::= { memoryStats 8}
-- GeaPort Information
geaportInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF GeaportInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of gea port mapping."
::= { geaportInfo 1 }
geaportInfoTableEntry OBJECT-TYPE
SYNTAX GeaportInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the geaport table mapping."
INDEX { geaportInfoLogicalIndex }
::= { geaportInfoTable 1 }
GeaportInfoTableEntry ::= SEQUENCE {
geaportInfoLogicalIndex PortNumber,
geaportInfoAlias DisplayString,
geaportInfoPort INTEGER,
geaportInfoUnit INTEGER
}
geaportInfoLogicalIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The logical port index."
::= { geaportInfoTableEntry 1 }
geaportInfoAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The GEA Port Alias."
::= { geaportInfoTableEntry 2 }
geaportInfoPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The GEA Port (0-based)."
::= { geaportInfoTableEntry 3 }
geaportInfoUnit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The GEA Unit."
::= { geaportInfoTableEntry 4 }
-- SFP Information
sfpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SfpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of external port SFP information."
::= { sfpInfo 1 }
sfpInfoTableEntry OBJECT-TYPE
SYNTAX SfpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the external port SFP information table."
INDEX { sfpInfoIndx }
::= { sfpInfoTable 1 }
SfpInfoTableEntry ::= SEQUENCE {
sfpInfoIndx PortNumber,
sfpInfoPort DisplayString,
sfpInfoDevice DisplayString,
sfpInfoTXEnable INTEGER,
sfpInfoRXSignal INTEGER,
sfpInfoTXFault INTEGER,
sfpInfoApproved INTEGER,
sfpInfoVendor DisplayString,
sfpInfoSerial DisplayString
}
sfpInfoIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The external port SFX index."
::= { sfpInfoTableEntry 1 }
sfpInfoPort OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP alias."
::= { sfpInfoTableEntry 2 }
sfpInfoDevice OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP Device."
::= { sfpInfoTableEntry 3 }
sfpInfoTXEnable OBJECT-TYPE
SYNTAX INTEGER {
notInstalled (1),
enabled (2),
disabled (3)
, notAvailable (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP TX-Enable."
::= { sfpInfoTableEntry 4 }
sfpInfoRXSignal OBJECT-TYPE
SYNTAX INTEGER {
notInstalled (1),
down (2),
link (3),
notAvailable (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP RX-Signal."
::= { sfpInfoTableEntry 5 }
sfpInfoTXFault OBJECT-TYPE
SYNTAX INTEGER {
notInstalled (1),
fault (2),
none (3),
notAvailable (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP TX-Fault."
::= { sfpInfoTableEntry 6 }
sfpInfoApproved OBJECT-TYPE
SYNTAX INTEGER {
notInstalled (1),
notApproved (2),
sfpApproved (3)
,sfpAccepted (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP Approval."
::= { sfpInfoTableEntry 7 }
sfpInfoVendor OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP device vendor."
::= { sfpInfoTableEntry 8 }
sfpInfoSerial OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP device serial."
::= { sfpInfoTableEntry 9 }
accessInfoClearAllUserFailAttempts OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action Object. When set to clear(2),clears all the unsuccessful
attempts of users. Otherwise nothing is done.
ok(1) is returned always when read."
::= { accessInfo 1 }
accessInfoClearAllUserLocks OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action Object. When set to clear(2), Unlock all locked users.
Otherwise nothing is done. ok(1) is returned always when read."
::= { accessInfo 2 }
accessUserInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccessUserInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of user information."
::= { accessInfo 3 }
accessUserInfoTableEntry OBJECT-TYPE
SYNTAX AccessUserInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the user information table."
INDEX { accessUserInfoIndex}
::= { accessUserInfoTable 1 }
AccessUserInfoTableEntry ::= SEQUENCE {
accessUserInfoIndex Integer32,
accessUserInfoLockState INTEGER,
accessUserInfoClearFailAttempts INTEGER,
accessUserInfoClearLock INTEGER
}
accessUserInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The table index. The index value corresponds to the same value
of agAccessUserCurCfgUId for the user."
::= { accessUserInfoTableEntry 1 }
accessUserInfoLockState OBJECT-TYPE
SYNTAX INTEGER {
unlocked(1),
locked(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lock State of a specific user, unlocked(1) or locked(2).
When the state is locked the user is not allowed to login
until the account is unlocked by the administrator."
::= { accessUserInfoTableEntry 2 }
accessUserInfoClearFailAttempts OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action Object. When set to clear(2), clears
the unsuccessful attempts of a particular user.
Otherwise nothing is done.
ok(1) is returned always when read."
::= { accessUserInfoTableEntry 3 }
accessUserInfoClearLock OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action Object. When set to clear(2), unlock a particular user.
Otherwise nothing is done.
ok(1) is returned always when read."
::= { accessUserInfoTableEntry 4 }
-- endif /* defined(WEB_UI) */
-- ----------------------------------------------------------------------------
-- } INSERT: agent
-- ----------------------------------------------------------------------------
layer2 OBJECT IDENTIFIER ::= { g8124-mgmt 2 }
-- ----------------------------------------------------------------------------
-- { INSERT: layer2
-- ----------------------------------------------------------------------------
layer2Configs OBJECT IDENTIFIER ::= { layer2 1 }
layer2Stats OBJECT IDENTIFIER ::= { layer2 2 }
layer2Info OBJECT IDENTIFIER ::= { layer2 3 }
layer2Oper OBJECT IDENTIFIER ::= { layer2 4 }
vlan OBJECT IDENTIFIER ::= { layer2Configs 1 }
trunkgroup OBJECT IDENTIFIER ::= { layer2Configs 2 }
stgCfg OBJECT IDENTIFIER ::= { layer2Configs 3 }
mirroring OBJECT IDENTIFIER ::= { layer2Configs 4 }
lacp OBJECT IDENTIFIER ::= { layer2Configs 5 }
thash OBJECT IDENTIFIER ::= { layer2Configs 6 }
mstCfg OBJECT IDENTIFIER ::= { layer2Configs 7 }
l2GeneralCfg OBJECT IDENTIFIER ::= { layer2Configs 8 }
failoverCfg OBJECT IDENTIFIER ::= { layer2Configs 10 }
-- ----------------------------------------------------------------------------
-- { INSERT: failoverCfg
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- { GLOBAL TEAMING CONFIG
-- ----------------------------------------------------------------------------
failoverCurCfgOnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Failover ON/OFF setting."
::= { failoverCfg 1 }
failoverNewCfgOnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Failover ON/OFF settings."
::= { failoverCfg 2 }
failoverMaxTriggerEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in the Failover Trigger Table."
::= { failoverCfg 5 }
-- } GLOBAL TEAMING CONFIG
-- ----------------------------------------------------------------------------
-- { CUR TEAMING FOP CONFIG
-- ----------------------------------------------------------------------------
failoverCurCfgTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF FailoverCurCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Failover Trigger Table."
::= { failoverCfg 6 }
failoverCurCfgTriggerTableEntry OBJECT-TYPE
SYNTAX FailoverCurCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Failover Trigger Table."
INDEX { failoverCurCfgTriggerId }
::= { failoverCurCfgTriggerTable 1 }
FailoverCurCfgTriggerTableEntry ::= SEQUENCE {
failoverCurCfgTriggerId Integer32,
failoverCurCfgTriggerLimit INTEGER,
failoverCurCfgTriggerMmonPort OCTET STRING,
failoverCurCfgTriggerMmonTrunk OCTET STRING,
failoverCurCfgTriggerMmonKey DisplayString,
failoverCurCfgTriggerMconPort OCTET STRING,
failoverCurCfgTriggerMconTrunk OCTET STRING,
failoverCurCfgTriggerMconKey DisplayString,
failoverCurCfgTriggerState INTEGER
}
failoverCurCfgTriggerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trigger identifier."
::= { failoverCurCfgTriggerTableEntry 1 }
failoverCurCfgTriggerState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable Trigger state"
::= { failoverCurCfgTriggerTableEntry 2 }
failoverCurCfgTriggerLimit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Limit # of operational links"
::= { failoverCurCfgTriggerTableEntry 3 }
failoverCurCfgTriggerMmonPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Manual Monitor port list. The ports are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the Manual Monitor
0 - The represented port does not belong to the Manual Monitor"
::= { failoverCurCfgTriggerTableEntry 6 }
failoverCurCfgTriggerMmonTrunk OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Manual Monitor trunk list. The trunks are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to the Manual Monitor
0 - The represented trunk does not belong to the Manual Monitor"
::= { failoverCurCfgTriggerTableEntry 7 }
failoverCurCfgTriggerMmonKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LACP admin key. This is an array of 16-bit read-only values."
::= { failoverCurCfgTriggerTableEntry 8 }
failoverCurCfgTriggerMconPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Manual Control port list. The ports are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the Manual Control
0 - The represented port does not belong to the Manual Control"
::= { failoverCurCfgTriggerTableEntry 9 }
failoverCurCfgTriggerMconTrunk OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Manual Control trunk list. The trunks are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to the Manual Control
0 - The represented trunk does not belong to the Manual Control"
::= { failoverCurCfgTriggerTableEntry 11 }
failoverCurCfgTriggerMconKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LACP admin key. This is an array of 16-bit read-only values."
::= { failoverCurCfgTriggerTableEntry 12 }
-- } CUR TEAMING FOP CONFIG
-- ----------------------------------------------------------------------------
-- { NEW TEAMING FOP CONFIG
-- ----------------------------------------------------------------------------
failoverNewCfgTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF FailoverNewCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Failover Trigger Table."
::= { failoverCfg 7 }
failoverNewCfgTriggerTableEntry OBJECT-TYPE
SYNTAX FailoverNewCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Failover Trigger Table."
INDEX { failoverNewCfgTriggerId }
::= { failoverNewCfgTriggerTable 1 }
FailoverNewCfgTriggerTableEntry ::= SEQUENCE {
failoverNewCfgTriggerId Integer32,
failoverNewCfgTriggerLimit INTEGER,
failoverNewCfgTriggerMmonPort OCTET STRING,
failoverNewCfgTriggerMmonPortAdd PortNumber,
failoverNewCfgTriggerMmonPortRem PortNumber,
failoverNewCfgTriggerMmonTrunk OCTET STRING,
failoverNewCfgTriggerMmonTrunkAdd INTEGER,
failoverNewCfgTriggerMmonTrunkRem INTEGER,
failoverNewCfgTriggerMmonKey DisplayString,
failoverNewCfgTriggerMmonKeyAdd INTEGER,
failoverNewCfgTriggerMmonKeyRem INTEGER,
failoverNewCfgTriggerMconPort OCTET STRING,
failoverNewCfgTriggerMconPortAdd PortNumber,
failoverNewCfgTriggerMconPortRem PortNumber,
failoverNewCfgTriggerMconTrunk OCTET STRING,
failoverNewCfgTriggerMconTrunkAdd INTEGER,
failoverNewCfgTriggerMconTrunkRem INTEGER,
failoverNewCfgTriggerMconKey DisplayString,
failoverNewCfgTriggerMconKeyAdd INTEGER,
failoverNewCfgTriggerMconKeyRem INTEGER,
failoverNewCfgTriggerState INTEGER,
failoverNewCfgTriggerDelete INTEGER
}
failoverNewCfgTriggerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trigger identifier."
::= { failoverNewCfgTriggerTableEntry 1 }
failoverNewCfgTriggerState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Trigger state"
::= { failoverNewCfgTriggerTableEntry 2 }
failoverNewCfgTriggerLimit OBJECT-TYPE
SYNTAX INTEGER (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Limit # of operational links"
::= { failoverNewCfgTriggerTableEntry 3 }
failoverNewCfgTriggerMmonPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Manual Monitor port list. The ports are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the Manual Monitor
0 - The represented port does not belong to the Manual Monitor"
::= { failoverNewCfgTriggerTableEntry 10 }
failoverNewCfgTriggerMmonPortAdd OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add port to Manual Monitor. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 11 }
failoverNewCfgTriggerMmonPortRem OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remove port from Manual Monitor. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 12 }
failoverNewCfgTriggerMmonTrunk OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Manual Monitor trunk list. The trunks are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to the Manual Monitor
0 - The represented trunk does not belong to the Manual Monitor"
::= { failoverNewCfgTriggerTableEntry 13 }
failoverNewCfgTriggerMmonTrunkAdd OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add trunk to Manual Monitor. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 14 }
failoverNewCfgTriggerMmonTrunkRem OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remove trunk from Manual Monitor. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 15 }
failoverNewCfgTriggerMmonKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LACP admin key. This is an array of 16-bit read-only values."
::= { failoverNewCfgTriggerTableEntry 16 }
failoverNewCfgTriggerMmonKeyAdd OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add LACP admin key to Manual Monitor. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 17 }
failoverNewCfgTriggerMmonKeyRem OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remove LACP admin key from Manual Monitor. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 18 }
failoverNewCfgTriggerMconPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Manual Control port list. The ports are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the Manual Control
0 - The represented port does not belong to the Manual Control"
::= { failoverNewCfgTriggerTableEntry 19 }
failoverNewCfgTriggerMconPortAdd OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add port to Manual Control. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 20 }
failoverNewCfgTriggerMconPortRem OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remove port from Manual Control. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 21 }
failoverNewCfgTriggerMconTrunk OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Manual Control trunk list. The trunks are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to the Manual Control
0 - The represented trunk does not belong to the Manual Control"
::= { failoverNewCfgTriggerTableEntry 25 }
failoverNewCfgTriggerMconTrunkAdd OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add trunk to Manual Control. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 26 }
failoverNewCfgTriggerMconTrunkRem OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remove trunk from Manual Control. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 27 }
failoverNewCfgTriggerMconKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LACP admin key. This is an array of 16-bit read-only values."
::= { failoverNewCfgTriggerTableEntry 28 }
failoverNewCfgTriggerMconKeyAdd OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add LACP admin key to Manual Control. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 29 }
failoverNewCfgTriggerMconKeyRem OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remove LACP admin key from Manual Control. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 30 }
failoverNewCfgTriggerDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned."
::= { failoverNewCfgTriggerTableEntry 31 }
-- } NEW TEAMING FOP CONFIG
-- ----------------------------------------------------------------------------
-- } INSERT: failoverCfg
-- ----------------------------------------------------------------------------
fdb OBJECT IDENTIFIER ::= { layer2Configs 13 }
hotlinksCfg OBJECT IDENTIFIER ::= { layer2Configs 14 }
-- ----------------------------------------------------------------------------
-- { INSERT: hotlinksCfg
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- { GLOBAL HOTLINKS CONFIG
-- ----------------------------------------------------------------------------
hotlinksCurCfgOnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hot Links ON/OFF setting."
::= { hotlinksCfg 1 }
hotlinksNewCfgOnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hot Links ON/OFF settings."
::= { hotlinksCfg 2 }
hotlinksCurCfgFdbUpdateState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Hot Links FDB Update setting."
::= { hotlinksCfg 3 }
hotlinksNewCfgFdbUpdateState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable Hot Links FDB Update setting."
::= { hotlinksCfg 4 }
hotlinksMaxTriggerEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in the Hot Links Trigger Table."
::= { hotlinksCfg 5 }
-- } GLOBAL HOTLINKS CONFIG
-- ----------------------------------------------------------------------------
-- { CUR HOTLINKS FOP CONFIG
-- ----------------------------------------------------------------------------
hotlinksCurCfgTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HotlinksCurCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Hot Links Trigger Table."
::= { hotlinksCfg 6 }
hotlinksCurCfgTriggerTableEntry OBJECT-TYPE
SYNTAX HotlinksCurCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Hot Links Trigger Table."
INDEX { hotlinksCurCfgTriggerId }
::= { hotlinksCurCfgTriggerTable 1 }
HotlinksCurCfgTriggerTableEntry ::= SEQUENCE {
hotlinksCurCfgTriggerId Integer32,
hotlinksCurCfgTriggerName DisplayString,
hotlinksCurCfgTriggerState INTEGER,
hotlinksCurCfgTriggerPreemptState INTEGER,
hotlinksCurCfgTriggerFdelay Integer32,
hotlinksCurCfgTriggerMasterPort Integer32,
hotlinksCurCfgTriggerMasterTrunk Integer32,
hotlinksCurCfgTriggerBackupPort Integer32,
hotlinksCurCfgTriggerBackupTrunk Integer32,
hotlinksCurCfgTriggerDelete INTEGER
, hotlinksCurCfgTriggerMasterAdminkey Integer32
, hotlinksCurCfgTriggerBackupAdminkey Integer32
}
hotlinksCurCfgTriggerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trigger identifier."
::= { hotlinksCurCfgTriggerTableEntry 1 }
hotlinksCurCfgTriggerName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string containing the trigger name."
::= { hotlinksCurCfgTriggerTableEntry 2 }
hotlinksCurCfgTriggerState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Trigger state."
::= { hotlinksCurCfgTriggerTableEntry 3 }
hotlinksCurCfgTriggerPreemptState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Preemption state."
::= { hotlinksCurCfgTriggerTableEntry 4 }
hotlinksCurCfgTriggerFdelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Forward Delay setting (in secs)."
::= { hotlinksCurCfgTriggerTableEntry 5 }
hotlinksCurCfgTriggerMasterPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The master interface port number."
::= { hotlinksCurCfgTriggerTableEntry 6 }
hotlinksCurCfgTriggerMasterTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The master interface trunk number."
::= { hotlinksCurCfgTriggerTableEntry 7 }
hotlinksCurCfgTriggerBackupPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The backup interface port number."
::= { hotlinksCurCfgTriggerTableEntry 8 }
hotlinksCurCfgTriggerBackupTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The backup interface trunk number."
::= { hotlinksCurCfgTriggerTableEntry 9 }
hotlinksCurCfgTriggerDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Delete a Hot Links trigger configuration."
::= { hotlinksCurCfgTriggerTableEntry 10 }
hotlinksCurCfgTriggerMasterAdminkey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The master interface admin key number."
::= { hotlinksCurCfgTriggerTableEntry 11 }
hotlinksCurCfgTriggerBackupAdminkey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The backup interface admin key number."
::= { hotlinksCurCfgTriggerTableEntry 12 }
-- } CUR HOTLINKS FOP CONFIG
-- ----------------------------------------------------------------------------
-- { NEW HOTLINKS FOP CONFIG
-- ----------------------------------------------------------------------------
hotlinksNewCfgTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HotlinksNewCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Hot Links Trigger Table."
::= { hotlinksCfg 7 }
hotlinksNewCfgTriggerTableEntry OBJECT-TYPE
SYNTAX HotlinksNewCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Hot Links Trigger Table."
INDEX { hotlinksNewCfgTriggerId }
::= { hotlinksNewCfgTriggerTable 1 }
HotlinksNewCfgTriggerTableEntry ::= SEQUENCE {
hotlinksNewCfgTriggerId Integer32,
hotlinksNewCfgTriggerName DisplayString,
hotlinksNewCfgTriggerState INTEGER,
hotlinksNewCfgTriggerPreemptState INTEGER,
hotlinksNewCfgTriggerFdelay Integer32,
hotlinksNewCfgTriggerMasterPort Integer32,
hotlinksNewCfgTriggerMasterTrunk Integer32,
hotlinksNewCfgTriggerBackupPort Integer32,
hotlinksNewCfgTriggerBackupTrunk Integer32,
hotlinksNewCfgTriggerDelete INTEGER
, hotlinksNewCfgTriggerMasterAdminkey Integer32
, hotlinksNewCfgTriggerBackupAdminkey Integer32
}
hotlinksNewCfgTriggerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trigger identifier."
::= { hotlinksNewCfgTriggerTableEntry 1 }
hotlinksNewCfgTriggerName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..33))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A textual string containing the trigger name."
::= { hotlinksNewCfgTriggerTableEntry 2 }
hotlinksNewCfgTriggerState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable Trigger state."
::= { hotlinksNewCfgTriggerTableEntry 3 }
hotlinksNewCfgTriggerPreemptState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable Preemption state."
::= { hotlinksNewCfgTriggerTableEntry 4 }
hotlinksNewCfgTriggerFdelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forward Delay setting (in secs)."
::= { hotlinksNewCfgTriggerTableEntry 5 }
hotlinksNewCfgTriggerMasterPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The master interface port number."
::= { hotlinksNewCfgTriggerTableEntry 6 }
hotlinksNewCfgTriggerMasterTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The master interface trunk number."
::= { hotlinksNewCfgTriggerTableEntry 7 }
hotlinksNewCfgTriggerBackupPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The backup interface port number."
::= { hotlinksNewCfgTriggerTableEntry 8 }
hotlinksNewCfgTriggerBackupTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The backup interface trunk number."
::= { hotlinksNewCfgTriggerTableEntry 9 }
hotlinksNewCfgTriggerDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete a Hot Links trigger configuration."
::= { hotlinksNewCfgTriggerTableEntry 10 }
hotlinksNewCfgTriggerMasterAdminkey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The master interface admin key number."
::= { hotlinksNewCfgTriggerTableEntry 11 }
hotlinksNewCfgTriggerBackupAdminkey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The backup interface admin key number."
::= { hotlinksNewCfgTriggerTableEntry 12 }
-- } NEW HOTLINKS FOP CONFIG
-- ----------------------------------------------------------------------------
-- { BPDU FLOOD CONFIG
-- ----------------------------------------------------------------------------
hotlinksCurCfgBpduState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Hot Links BPDU flood setting."
::= { hotlinksCfg 8 }
hotlinksNewCfgBpduState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable Hot Links BPDU flood setting."
::= { hotlinksCfg 9 }
-- } BPDU FLOOD CONFIG
-- ----------------------------------------------------------------------------
-- { FDB UPDATE RATE CONFIG
-- ----------------------------------------------------------------------------
hotlinksCurCfgFdbUpdateRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hot Links FDB update rate (packets per second)."
::= { hotlinksCfg 10 }
hotlinksNewCfgFdbUpdateRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hot Links FDB update rate (packets per second)."
::= { hotlinksCfg 11 }
-- } FDB UPDATE RATE CONFIG
-- ----------------------------------------------------------------------------
-- } INSERT: hotlinksCfg
-- ----------------------------------------------------------------------------
lldpCfg OBJECT IDENTIFIER ::= { layer2Configs 15 }
vlagCfg OBJECT IDENTIFIER ::= { layer2Configs 18 }
vlagIslCfg OBJECT IDENTIFIER ::= { vlagCfg 1 }
ecpCfg OBJECT IDENTIFIER ::= { layer2Configs 19 }
thashL2 OBJECT IDENTIFIER ::= { thash 1 }
mirrPortMirr OBJECT IDENTIFIER ::= { mirroring 1 }
mstGeneralCfg OBJECT IDENTIFIER ::= { mstCfg 1 }
mstCistCfg OBJECT IDENTIFIER ::= { mstCfg 2 }
fdbGeneralCfg OBJECT IDENTIFIER ::= { fdb 1 }
-- FDB
fdbCurCfgAgingTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fdb current aging time"
::= { fdbGeneralCfg 1 }
fdbNewCfgAgingTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Fdb new aging time."
::= { fdbGeneralCfg 2 }
fdbStats OBJECT IDENTIFIER ::= { layer2Stats 1 }
stpStats OBJECT IDENTIFIER ::= { layer2Stats 2 }
lacpStats OBJECT IDENTIFIER ::= { layer2Stats 4 }
hotlinksStats OBJECT IDENTIFIER ::= { layer2Stats 6 }
-- ----------------------------------------------------------------------------
-- { INSERT: hotlinksStats
-- ----------------------------------------------------------------------------
hotlinksStatsTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HotlinksStatsTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Hot Links Trigger Table Stats."
::= { hotlinksStats 1 }
hotlinksStatsTriggerTableEntry OBJECT-TYPE
SYNTAX HotlinksStatsTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Hot Links Trigger Table Stats."
INDEX { hotlinksStatsTriggerId }
::= { hotlinksStatsTriggerTable 1 }
HotlinksStatsTriggerTableEntry ::= SEQUENCE {
hotlinksStatsTriggerId Integer32,
hotlinksStatsTriggerName DisplayString,
hotlinksStatsTriggerMasterActive Integer32,
hotlinksStatsTriggerBackupActive Integer32,
hotlinksStatsTriggerFdbUpdate Integer32,
hotlinksStatsTriggerFdbFailed Integer32
}
hotlinksStatsTriggerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trigger identifier."
::= { hotlinksStatsTriggerTableEntry 1 }
hotlinksStatsTriggerName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string containing the trigger name."
::= { hotlinksStatsTriggerTableEntry 2 }
hotlinksStatsTriggerMasterActive OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the master interface was set to active."
::= { hotlinksStatsTriggerTableEntry 3 }
hotlinksStatsTriggerBackupActive OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the backup interface was set to active."
::= { hotlinksStatsTriggerTableEntry 4 }
hotlinksStatsTriggerFdbUpdate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an FDB update was performed."
::= { hotlinksStatsTriggerTableEntry 5 }
hotlinksStatsTriggerFdbFailed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an FDB update failed."
::= { hotlinksStatsTriggerTableEntry 6 }
-- ----------------------------------------------------------------------------
-- } INSERT: hotlinksStats
-- ----------------------------------------------------------------------------
lldpStats OBJECT IDENTIFIER ::= { layer2Stats 7 }
oamStats OBJECT IDENTIFIER ::= { layer2Stats 8 }
vlagStats OBJECT IDENTIFIER ::= { layer2Stats 11 }
vlagStatsSystem OBJECT IDENTIFIER ::= { vlagStats 1 }
vlagStatsIsl OBJECT IDENTIFIER ::= { vlagStats 2 }
vlagStatsHealth OBJECT IDENTIFIER ::= { vlagStats 3 }
vlagStatsLacp OBJECT IDENTIFIER ::= { vlagStats 4 }
vlagStatsPdu OBJECT IDENTIFIER ::= { vlagStats 5 }
vlagStatsIgmp OBJECT IDENTIFIER ::= { vlagStats 6 }
fdbInfo OBJECT IDENTIFIER ::= { layer2Info 1 }
stpInfo OBJECT IDENTIFIER ::= { layer2Info 2 }
lacpInfo OBJECT IDENTIFIER ::= { layer2Info 3 }
cistInfo OBJECT IDENTIFIER ::= { layer2Info 4 }
genInfo OBJECT IDENTIFIER ::= { layer2Info 7 }
vlanInfo OBJECT IDENTIFIER ::= { layer2Info 5 }
trunkGroupInfo OBJECT IDENTIFIER ::= { layer2Info 9 }
hotlinksInfo OBJECT IDENTIFIER ::= { layer2Info 10 }
-- ----------------------------------------------------------------------------
-- { INSERT: hotlinksInfo
-- ----------------------------------------------------------------------------
hotlinksInfoOnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hot Links ON/OFF setting info."
::= { hotlinksInfo 1 }
hotlinksInfoFdbUpdateState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Hot Links FDB Update setting info."
::= { hotlinksInfo 2 }
hotlinksInfoTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HotlinksInfoTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Hot Links Trigger Table Info."
::= { hotlinksInfo 3 }
hotlinksInfoBpduState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Hot Links BPDU flood setting info."
::= { hotlinksInfo 4 }
hotlinksInfoFdbUpdateRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hot Links FDB update rate (packets per second)."
::= { hotlinksInfo 5 }
hotlinksInfoTriggerTableEntry OBJECT-TYPE
SYNTAX HotlinksInfoTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Hot Links Trigger Table Info."
INDEX { hotlinksInfoTriggerId }
::= { hotlinksInfoTriggerTable 1 }
HotlinksInfoTriggerTableEntry ::= SEQUENCE {
hotlinksInfoTriggerId Integer32,
hotlinksInfoTriggerName DisplayString,
hotlinksInfoTriggerState INTEGER,
hotlinksInfoTriggerPreemptState INTEGER,
hotlinksInfoTriggerFdelay Integer32,
hotlinksInfoTriggerActive DisplayString
}
hotlinksInfoTriggerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trigger identifier."
::= { hotlinksInfoTriggerTableEntry 1 }
hotlinksInfoTriggerName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string containing the trigger name."
::= { hotlinksInfoTriggerTableEntry 2 }
hotlinksInfoTriggerState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Trigger state info."
::= { hotlinksInfoTriggerTableEntry 3 }
hotlinksInfoTriggerPreemptState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Preemption state info."
::= { hotlinksInfoTriggerTableEntry 4 }
hotlinksInfoTriggerFdelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Forward Delay setting info (in secs)."
::= { hotlinksInfoTriggerTableEntry 5 }
hotlinksInfoTriggerActive OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string containing the active interface info."
::= { hotlinksInfoTriggerTableEntry 6 }
-- ----------------------------------------------------------------------------
-- } INSERT: hotlinksInfo
-- ----------------------------------------------------------------------------
lldpInfo OBJECT IDENTIFIER ::= { layer2Info 11 }
cistGeneralInfo OBJECT IDENTIFIER ::= { cistInfo 1 }
oamInfo OBJECT IDENTIFIER ::= { layer2Info 12 }
udldInfo OBJECT IDENTIFIER ::= { layer2Info 13 }
failoverInfo OBJECT IDENTIFIER ::= { layer2Info 14 }
-- ----------------------------------------------------------------------------
-- { INSERT: failoverInfo
-- ----------------------------------------------------------------------------
failoverInfoState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of failover"
::= { failoverInfo 1 }
failoverInfoTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF FailoverInfoTriggerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table holds the information for individual triggers"
::= { failoverInfo 3 }
failoverInfoTriggerEntry OBJECT-TYPE
SYNTAX FailoverInfoTriggerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the failover trigger table."
INDEX { failoverInfoTriggerId }
::= { failoverInfoTriggerTable 1 }
FailoverInfoTriggerEntry ::= SEQUENCE {
failoverInfoTriggerId Integer32,
failoverInfoTriggerState INTEGER,
failoverInfoTriggerLimit INTEGER,
failoverInfoTriggerMonitorState INTEGER,
failoverInfoTriggerMonitorPorts OCTET STRING,
failoverInfoTriggerControlState INTEGER,
failoverInfoTriggerControlPorts OCTET STRING,
failoverInfoTriggerControlPorts OCTET STRING
}
failoverInfoTriggerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trigger identifier."
::= { failoverInfoTriggerEntry 1 }
failoverInfoTriggerState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trigger state."
::= { failoverInfoTriggerEntry 2 }
failoverInfoTriggerLimit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Limit number of operational links"
::= { failoverInfoTriggerEntry 3 }
failoverInfoTriggerMonitorState OBJECT-TYPE
SYNTAX INTEGER{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The runtime monitor state"
::= { failoverInfoTriggerEntry 4 }
failoverInfoTriggerMonitorPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of ports that are monitored. The ports are
represented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to Monitor list
0 - The represented port does not belong to Monitor list"
::= { failoverInfoTriggerEntry 5 }
failoverInfoTriggerControlState OBJECT-TYPE
SYNTAX INTEGER{
auto-controlled(1),
auto-disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The runtime control state"
::= { failoverInfoTriggerEntry 6 }
failoverInfoTriggerControlPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of ports that are controlled. The ports are
represented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to Control list
0 - The represented port does not belong to Control list"
::= { failoverInfoTriggerEntry 7 }
failoverInfoMonPortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF FailoverInfoTriggerMonPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table holds the information for individual triggers"
::= { failoverInfo 4 }
failoverInfoTriggerMonPortEntry OBJECT-TYPE
SYNTAX FailoverInfoTriggerMonPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the failover trigger table."
INDEX { failoverInfoTriggerMonId, failoverInfoTriggerMonPortId }
::= { failoverInfoMonPortStateTable 1 }
FailoverInfoTriggerMonPortEntry ::= SEQUENCE {
failoverInfoTriggerMonId Integer32,
failoverInfoTriggerMonPortId PortNumber,
failoverInfoTriggerMonPortStatus INTEGER
}
failoverInfoTriggerMonId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trigger identifier."
::= { failoverInfoTriggerMonPortEntry 1 }
failoverInfoTriggerMonPortId OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier."
::= { failoverInfoTriggerMonPortEntry 2 }
failoverInfoTriggerMonPortStatus OBJECT-TYPE
SYNTAX INTEGER{
failed(0),
operational(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Status."
::= { failoverInfoTriggerMonPortEntry 3 }
failoverInfoCtlPortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF FailoverInfoTriggerCtlPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table holds the information for individual triggers"
::= { failoverInfo 5 }
failoverInfoTriggerCtlPortEntry OBJECT-TYPE
SYNTAX FailoverInfoTriggerCtlPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the failover trigger table."
INDEX { failoverInfoTriggerCtlId, failoverInfoTriggerCtlPortId }
::= { failoverInfoCtlPortStateTable 1 }
FailoverInfoTriggerCtlPortEntry ::= SEQUENCE {
failoverInfoTriggerCtlId Integer32,
failoverInfoTriggerCtlPortId PortNumber,
failoverInfoTriggerCtlPortStatus INTEGER
}
failoverInfoTriggerCtlId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trigger identifier."
::= { failoverInfoTriggerCtlPortEntry 1 }
failoverInfoTriggerCtlPortId OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier."
::= { failoverInfoTriggerCtlPortEntry 2 }
failoverInfoTriggerCtlPortStatus OBJECT-TYPE
SYNTAX INTEGER{
failed(0),
operational(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Status."
::= { failoverInfoTriggerCtlPortEntry 3 }
-- ----------------------------------------------------------------------------
-- } INSERT: failoverInfo
-- ----------------------------------------------------------------------------
vlagInfo OBJECT IDENTIFIER ::= { layer2Info 16 }
vlagInfoSystem OBJECT IDENTIFIER ::= { vlagInfo 1 }
vlagInfoGroup OBJECT IDENTIFIER ::= { vlagInfo 2 }
vlagInfoIslGroup OBJECT IDENTIFIER ::= { vlagInfoGroup 2 }
ecpInfo OBJECT IDENTIFIER ::= { layer2Info 17 }
-- VLAN group
vlanMaxEnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the VLAN configuration table."
::= { vlan 1 }
vlanMaxVlanID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum allowed VLAN ID."
::= { vlan 4 }
vlanCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN configuration."
::= { vlan 2 }
vlanCurCfgTableEntry OBJECT-TYPE
SYNTAX VlanCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the VLAN configuration table."
INDEX { vlanCurCfgVlanId }
::= { vlanCurCfgTable 1 }
VlanCurCfgTableEntry ::= SEQUENCE {
vlanCurCfgVlanId Integer32,
vlanCurCfgPorts OCTET STRING,
vlanCurCfgState INTEGER,
vlanCurCfgStg Integer32,
vlanCurCfgPrVlanType INTEGER,
vlanCurCfgPrVlanMapPriId Integer32,
vlanCurCfgPrVlanState INTEGER,
vlanCurCfgVlanName DisplayString
}
vlanCurCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vlanCurCfgTableEntry 1 }
vlanCurCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN"
::= { vlanCurCfgTableEntry 2 }
vlanCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable a VLAN"
::= { vlanCurCfgTableEntry 3 }
vlanCurCfgStg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Spanning Tree Group for the VLAN."
::= { vlanCurCfgTableEntry 5 }
vlanCurCfgVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN name."
::= { vlanCurCfgTableEntry 9 }
vlanCurCfgPrVlanType OBJECT-TYPE
SYNTAX INTEGER{
none(0),
primary(1),
isolated(2),
community(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the Private VLAN."
::= { vlanCurCfgTableEntry 10 }
vlanCurCfgPrVlanMapPriId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary vlan id"
::= { vlanCurCfgTableEntry 11 }
vlanCurCfgPrVlanState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable a Private VLAN."
::= { vlanCurCfgTableEntry 12 }
vlanNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN configuration."
::= { vlan 3 }
vlanNewCfgTableEntry OBJECT-TYPE
SYNTAX VlanNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the VLAN configuration table."
INDEX { vlanNewCfgVlanId }
::= { vlanNewCfgTable 1 }
VlanNewCfgTableEntry ::= SEQUENCE {
vlanNewCfgVlanId Integer32,
vlanNewCfgVlanName DisplayString,
vlanNewCfgPorts OCTET STRING,
vlanNewCfgState INTEGER,
vlanNewCfgAddPort PortNumber,
vlanNewCfgRemovePort PortNumber,
vlanNewCfgStg Integer32,
vlanNewCfgPrVlanType INTEGER,
vlanNewCfgPrVlanMapPriId Integer32,
vlanNewCfgPrVlanState INTEGER,
vlanNewCfgDelete INTEGER
}
vlanNewCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vlanNewCfgTableEntry 1 }
vlanNewCfgVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN name."
::= { vlanNewCfgTableEntry 2 }
vlanNewCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN"
::= { vlanNewCfgTableEntry 3 }
vlanNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable a VLAN"
::= { vlanNewCfgTableEntry 4 }
vlanNewCfgAddPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be added to the specified VLAN. A '0' value is
returned when read."
::= { vlanNewCfgTableEntry 5 }
vlanNewCfgRemovePort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be removed from the specified VLAN. A '0'
value is returned when read."
::= { vlanNewCfgTableEntry 6 }
vlanNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is an action object to create or delete a VLAN.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a VLAN"
::= { vlanNewCfgTableEntry 7 }
vlanNewCfgStg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Spanning Tree Group for the VLAN."
::= { vlanNewCfgTableEntry 9 }
vlanNewCfgPrVlanType OBJECT-TYPE
SYNTAX INTEGER{
none(0),
primary(1),
isolated(2),
community(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the Private VLAN."
::= { vlanNewCfgTableEntry 13 }
vlanNewCfgPrVlanMapPriId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The primary vlan id. To delete set 0."
::= { vlanNewCfgTableEntry 14 }
vlanNewCfgPrVlanState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable a Private VLAN."
::= { vlanNewCfgTableEntry 15 }
-- Link Aggregation Control Protocol Group
lacpCurSystemPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 2-octet read-write value indicating the priority
value associated with the Actor's System ID."
::= { lacp 1 }
lacpNewSystemPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 2-octet read-write value indicating the priority
value associated with the Actor's System ID."
::= { lacp 2 }
lacpCurSystemTimeoutTime OBJECT-TYPE
SYNTAX INTEGER {
short(3),
long(90)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If a port does not receive LACPDUs for Timeout time LACP
information pertaining to the port is invalidated.
Its every 3 sec (short) and every 90 sec (long 3)."
::= { lacp 5 }
lacpNewSystemTimeoutTime OBJECT-TYPE
SYNTAX INTEGER {
short(3),
long(90)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a port does not receive LACPDUs for Timeout time LACP
information pertaining to the port is invalidated.
Its every 3 sec (short) and every 90 sec (long 3)."
::= { lacp 6 }
lacpCurPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpCurPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port configuration."
::= { lacp 7 }
lacpCurPortCfgTableEntry OBJECT-TYPE
SYNTAX LacpCurPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LACP port configuration table."
INDEX { lacpCurPortCfgTableId }
::= { lacpCurPortCfgTable 1 }
LacpCurPortCfgTableEntry ::= SEQUENCE {
lacpCurPortCfgTableId PortNumber,
lacpCurPortState INTEGER,
lacpCurPortActorPortPriority INTEGER,
lacpCurPortActorAdminKey INTEGER
, lacpCurPortActorMinLinks INTEGER
, lacpCurPortSuspendIndividual INTEGER
}
lacpCurPortCfgTableId OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" LACP port number."
::= { lacpCurPortCfgTableEntry 1 }
lacpCurPortState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
active(2),
passive(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer."
::= { lacpCurPortCfgTableEntry 2 }
lacpCurPortActorPortPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority value assigned to this Aggregation Port.
This 16-bit value is read-only."
::= { lacpCurPortCfgTableEntry 3 }
lacpCurPortActorAdminKey OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local
significance."
::= { lacpCurPortCfgTableEntry 4 }
lacpCurPortActorMinLinks OBJECT-TYPE
SYNTAX INTEGER (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current minimum links for the Aggregation Port.
This is a 16-bit read-only value. The meaning of
particular Key values is of local significance."
::= { lacpCurPortCfgTableEntry 5 }
lacpCurPortSuspendIndividual OBJECT-TYPE
SYNTAX INTEGER {
suspend(1),
individual(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates if the port can be treated as an individual
link when it does not get LACPDU from the peer port.
suspend (can't be treated as a normal link)
individual (can be treated as a normal link)"
::= { lacpCurPortCfgTableEntry 6 }
lacpNewPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpNewPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port configuration."
::= { lacp 8 }
lacpNewPortCfgTableEntry OBJECT-TYPE
SYNTAX LacpNewPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LACP port configuration table."
INDEX { lacpNewPortCfgTableId }
::= { lacpNewPortCfgTable 1 }
LacpNewPortCfgTableEntry ::= SEQUENCE {
lacpNewPortCfgTableId PortNumber,
lacpNewPortState INTEGER,
lacpNewPortActorPortPriority INTEGER,
lacpNewPortActorAdminKey INTEGER,
lacpNewPortActorMinLinks INTEGER,
lacpNewPortSetToDefault INTEGER
, lacpNewPortSuspendIndividual INTEGER
}
lacpNewPortCfgTableId OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" LACP port number."
::= { lacpNewPortCfgTableEntry 1 }
lacpNewPortState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
active(2),
passive(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer."
::= { lacpNewPortCfgTableEntry 2 }
lacpNewPortActorPortPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority value assigned to this Aggregation Port.
This 16-bit value is read-write."
::= { lacpNewPortCfgTableEntry 3 }
lacpNewPortActorAdminKey OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local
significance."
::= { lacpNewPortCfgTableEntry 4 }
lacpNewPortActorMinLinks OBJECT-TYPE
SYNTAX INTEGER (1..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current minimum links for the Aggregation Port.
This is a 16-bit read-write value. The meaning of
particular Key values is of local significance."
::= { lacpNewPortCfgTableEntry 5 }
lacpNewPortSetToDefault OBJECT-TYPE
SYNTAX INTEGER {
none(1),
setDefault(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When read, always returns none(1).
When setting setDefault(2) value, the LACP port settings
are set to the default values."
::= { lacpNewPortCfgTableEntry 6 }
lacpNewPortSuspendIndividual OBJECT-TYPE
SYNTAX INTEGER {
suspend(1),
individual(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It indicates if the port can be treated as an individual
link when it does not get LACPDU from the peer port.
suspend (can't be treated as a normal link)
individual (can be treated as a normal link)"
::= { lacpNewPortCfgTableEntry 7 }
lacpDeleteTrunk OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete a trunk with specified admin key"
::= { lacp 9 }
lacpNewSystemSetToDefault OBJECT-TYPE
SYNTAX INTEGER {
none(1),
setDefault(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When read, always returns none(1).
When setting setDefault(2) value, the LACP system settings
are set to the default values."
::= { lacp 10 }
-- Trunk Group Group
trunkGroupTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in trunk group table."
::= { trunkgroup 1 }
trunkGroupCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of trunk group configuration."
::= { trunkgroup 2 }
trunkGroupCurCfgTableEntry OBJECT-TYPE
SYNTAX TrunkGroupCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the trunk group configuration table."
INDEX { trunkGroupCurCfgIndex }
::= { trunkGroupCurCfgTable 1 }
TrunkGroupCurCfgTableEntry ::= SEQUENCE {
trunkGroupCurCfgIndex Integer32,
trunkGroupCurCfgPorts OCTET STRING,
trunkGroupCurCfgState INTEGER
}
trunkGroupCurCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { trunkGroupCurCfgTableEntry 1 }
trunkGroupCurCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group"
::= { trunkGroupCurCfgTableEntry 2 }
trunkGroupCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable a trunk group."
::= { trunkGroupCurCfgTableEntry 3 }
trunkGroupNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of trunk group configuration."
::= { trunkgroup 3 }
trunkGroupNewCfgTableEntry OBJECT-TYPE
SYNTAX TrunkGroupNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the trunk group configuration table."
INDEX { trunkGroupNewCfgIndex }
::= { trunkGroupNewCfgTable 1 }
TrunkGroupNewCfgTableEntry ::= SEQUENCE {
trunkGroupNewCfgIndex Integer32,
trunkGroupNewCfgPorts OCTET STRING,
trunkGroupNewCfgAddPort PortNumber,
trunkGroupNewCfgRemovePort PortNumber,
trunkGroupNewCfgState INTEGER,
trunkGroupNewCfgDelete INTEGER
}
trunkGroupNewCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { trunkGroupNewCfgTableEntry 1 }
trunkGroupNewCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the trunk group. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group"
::= { trunkGroupNewCfgTableEntry 2 }
trunkGroupNewCfgAddPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be added in the trunk group. When read, 0 is returned."
::= { trunkGroupNewCfgTableEntry 3 }
trunkGroupNewCfgRemovePort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be deleted from the trunk group. when read, 0
is returned."
::= { trunkGroupNewCfgTableEntry 4 }
trunkGroupNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable a trunk group."
::= { trunkGroupNewCfgTableEntry 5 }
trunkGroupNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned."
::= { trunkGroupNewCfgTableEntry 6 }
trunkLacpGroupTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in LACP trunk group table."
::= { trunkgroup 4 }
trunkLacpGroupCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkLacpGroupCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP trunk group configuration."
::= { trunkgroup 5 }
trunkLacpGroupCurCfgTableEntry OBJECT-TYPE
SYNTAX TrunkLacpGroupCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LACP trunk group configuration table."
INDEX { trunkLacpGroupCurCfgIndex }
::= { trunkLacpGroupCurCfgTable 1 }
TrunkLacpGroupCurCfgTableEntry ::= SEQUENCE {
trunkLacpGroupCurCfgIndex Integer32,
trunkLacpGroupCurCfgAdminKey Integer32
}
trunkLacpGroupCurCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the LACP trunk group."
::= { trunkLacpGroupCurCfgTableEntry 1 }
trunkLacpGroupCurCfgAdminKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative key of the LACP trunk group. Ports
whose LACP key is same will be member ports of the trunk."
::= { trunkLacpGroupCurCfgTableEntry 2 }
trunkLacpGroupNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkLacpGroupNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP trunk group configuration."
::= { trunkgroup 6 }
trunkLacpGroupNewCfgTableEntry OBJECT-TYPE
SYNTAX TrunkLacpGroupNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LACP trunk group configuration table."
INDEX { trunkLacpGroupNewCfgIndex }
::= { trunkLacpGroupNewCfgTable 1 }
TrunkLacpGroupNewCfgTableEntry ::= SEQUENCE {
trunkLacpGroupNewCfgIndex Integer32,
trunkLacpGroupNewCfgAdminKey Integer32
}
trunkLacpGroupNewCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the LACP trunk group."
::= { trunkLacpGroupNewCfgTableEntry 1 }
trunkLacpGroupNewCfgAdminKey OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative key of the LACP trunk group. Ports
whose LACP key is same will be member ports of the trunk.
Value 0 means LACP trunk group deletion."
::= { trunkLacpGroupNewCfgTableEntry 2 }
-- Elmo trunk hash
l2ThashCurCfgSmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable smac hash."
::= { thashL2 1 }
l2ThashNewCfgSmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable smac hash."
::= { thashL2 2 }
l2ThashCurCfgDmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable dmac hash."
::= { thashL2 3 }
l2ThashNewCfgDmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable dmac hash."
::= { thashL2 4 }
l2ThashCurCfgSipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable sip hash."
::= { thashL2 5 }
l2ThashNewCfgSipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable sip hash."
::= { thashL2 6 }
l2ThashCurCfgDipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable dip hash."
::= { thashL2 7 }
l2ThashNewCfgDipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable dip hash."
::= { thashL2 8 }
-- Spanning Tree Group Configuration
-- This group specifies the additional configurations that are not
-- covered by the Bridge MIB (RFC 1493).
-- The relative Spanning Tree information can be retrieved or configured
-- using Bridge MIB with an unique community string for each group specified
-- in entLogicalTable of Entity MIB (RFC 2037).
--
stgCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group configuration."
::= { stgCfg 1 }
stgCurCfgTableEntry OBJECT-TYPE
SYNTAX StgCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Spanning Tree Group configuration."
INDEX { stgCurCfgIndex }
::= { stgCurCfgTable 1 }
StgCurCfgTableEntry ::= SEQUENCE {
stgCurCfgIndex Integer32,
stgCurCfgState INTEGER,
stgCurCfgPriority INTEGER,
stgCurCfgBrgHelloTime INTEGER,
stgCurCfgBrgForwardDelay INTEGER,
stgCurCfgBrgMaxAge INTEGER,
stgCurCfgVlanBmap OCTET STRING
}
stgCurCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stgCurCfgTableEntry 1 }
stgCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular Spanning
Tree Group."
::= { stgCurCfgTableEntry 2 }
stgCurCfgPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID."
::= { stgCurCfgTableEntry 5 }
stgCurCfgBrgHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root."
::= { stgCurCfgTableEntry 6 }
stgCurCfgBrgForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { stgCurCfgTableEntry 7 }
stgCurCfgBrgMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { stgCurCfgTableEntry 8 }
stgCurCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree"
::= { stgCurCfgTableEntry 10 }
stgNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Groups configuration in the new_config."
::= { stgCfg 2 }
stgNewCfgTableEntry OBJECT-TYPE
SYNTAX StgNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Spanning Tree Group configuration."
INDEX { stgNewCfgIndex }
::= { stgNewCfgTable 1 }
StgNewCfgTableEntry ::= SEQUENCE {
stgNewCfgIndex Integer32,
stgNewCfgState INTEGER,
stgNewCfgDefaultCfg INTEGER,
stgNewCfgAddVlan Integer32,
stgNewCfgRemoveVlan Integer32,
stgNewCfgPriority INTEGER,
stgNewCfgBrgHelloTime INTEGER,
stgNewCfgBrgForwardDelay INTEGER,
stgNewCfgBrgMaxAge INTEGER,
stgNewCfgVlanBmap OCTET STRING,
stgNewCfgRemoveAllVlan INTEGER
}
stgNewCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stgNewCfgTableEntry 1 }
stgNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular Spanning
Tree Group."
::= { stgNewCfgTableEntry 2 }
stgNewCfgDefaultCfg OBJECT-TYPE
SYNTAX INTEGER {
default-config(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value to default-config(1) will set the default
configuration as recommended by IEEE 802.1D for a particular
Spanning Tree Group. default-config (1) is always returned
When read, but it does not mean anything."
::= { stgNewCfgTableEntry 3 }
stgNewCfgAddVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan to be added to the specified Spanning Tree Group. A
'0' value is returned when read."
::= {stgNewCfgTableEntry 4 }
stgNewCfgRemoveVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan to be removed from the specified Spanning Tree Group.
A '0' value is returned when read."
::= { stgNewCfgTableEntry 5 }
stgNewCfgPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID."
::= { stgNewCfgTableEntry 8 }
stgNewCfgBrgHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root."
::= { stgNewCfgTableEntry 9 }
stgNewCfgBrgForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { stgNewCfgTableEntry 10 }
stgNewCfgBrgMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { stgNewCfgTableEntry 11 }
stgNewCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree"
::= { stgNewCfgTableEntry 13 }
stgNewCfgRemoveAllVlan OBJECT-TYPE
SYNTAX INTEGER {
default-config(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The all vlans to be removed from the specified Spanning Tree Group.
A '0' value is returned when read."
::= { stgNewCfgTableEntry 14 }
stgCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port configuration in the
current_config."
::= { stgCfg 3 }
stgCurCfgPortTableEntry OBJECT-TYPE
SYNTAX StgCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about port configuration of a particular Spanning Tree
Group."
INDEX { stgCurCfgStgIndex, stgCurCfgPortIndex }
::= { stgCurCfgPortTable 1 }
StgCurCfgPortTableEntry ::= SEQUENCE {
stgCurCfgStgIndex Integer32,
stgCurCfgPortIndex PortNumber,
stgCurCfgPortPriority INTEGER,
stgCurCfgPortPathCost Integer32,
stgCurCfgPortState INTEGER
}
stgCurCfgStgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stgCurCfgPortTableEntry 1 }
stgCurCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group."
::= { stgCurCfgPortTableEntry 2 }
stgCurCfgPortState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group."
::= { stgCurCfgPortTableEntry 3 }
stgCurCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID."
::= { stgCurCfgPortTableEntry 4 }
stgCurCfgPortPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards the
spanning tree root which include this port (
range is (0..200000000) )."
::= { stgCurCfgPortTableEntry 5 }
stgNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port configuration in the
new_config."
::= { stgCfg 4 }
stgNewCfgPortTableEntry OBJECT-TYPE
SYNTAX StgNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about port configuration of a particular Spanning Tree
Group."
INDEX { stgNewCfgStgIndex, stgNewCfgPortIndex }
::= { stgNewCfgPortTable 1 }
StgNewCfgPortTableEntry ::= SEQUENCE {
stgNewCfgStgIndex Integer32,
stgNewCfgPortIndex PortNumber,
stgNewCfgPortPriority INTEGER,
stgNewCfgPortPathCost Integer32,
stgNewCfgPortState INTEGER
}
stgNewCfgStgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stgNewCfgPortTableEntry 1 }
stgNewCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group."
::= { stgNewCfgPortTableEntry 2 }
stgNewCfgPortState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group."
::= { stgNewCfgPortTableEntry 3 }
stgNewCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID."
::= { stgNewCfgPortTableEntry 4 }
stgNewCfgPortPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards the
spanning tree root which include this port (
range is (0..200000000) )."
::= { stgNewCfgPortTableEntry 5 }
-- Complete Port Mirroring
pmCurCfgPortMirrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of port-based port mirroring."
::= { mirrPortMirr 1 }
pmNewCfgPortMirrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of port-based port mirroring."
::= { mirrPortMirr 2 }
pmCurCfgPortMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmCurCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of monitoring ports."
::= { mirrPortMirr 3 }
pmCurCfgPortMonitorEntry OBJECT-TYPE
SYNTAX PmCurCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the monitoring port table."
INDEX { pmCurCfgPmirrMoniPortIndex, pmCurCfgPmirrMirrPortIndex }
::= { pmCurCfgPortMonitorTable 1 }
PmCurCfgPortMonitorEntry ::= SEQUENCE {
pmCurCfgPmirrMoniPortIndex PortNumber,
pmCurCfgPmirrMirrPortIndex PortNumber,
pmCurCfgPmirrDirection INTEGER
}
pmCurCfgPmirrMoniPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The monitoring port number."
::= { pmCurCfgPortMonitorEntry 1 }
pmCurCfgPmirrMirrPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mirrored port number"
::= { pmCurCfgPortMonitorEntry 2 }
pmCurCfgPmirrDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1),
out(2),
both(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of traffic to be monitored with respect to the
mirrored port."
::= { pmCurCfgPortMonitorEntry 3 }
pmNewCfgPortMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmNewCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of monitoring ports."
::= { mirrPortMirr 4 }
pmNewCfgPortMonitorEntry OBJECT-TYPE
SYNTAX PmNewCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the monitoring port table."
INDEX { pmNewCfgPmirrMoniPortIndex, pmNewCfgPmirrMirrPortIndex }
::= { pmNewCfgPortMonitorTable 1 }
PmNewCfgPortMonitorEntry ::= SEQUENCE {
pmNewCfgPmirrMoniPortIndex PortNumber,
pmNewCfgPmirrMirrPortIndex PortNumber,
pmNewCfgPmirrDirection INTEGER,
pmNewCfgPmirrDelete INTEGER,
pmNewCfgPmonDelete INTEGER
}
pmNewCfgPmirrMoniPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The monitoring port number."
::= { pmNewCfgPortMonitorEntry 1 }
pmNewCfgPmirrMirrPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mirrored port number"
::= { pmNewCfgPortMonitorEntry 2 }
pmNewCfgPmirrDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1),
out(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of traffic to be monitored with respect to the
mirrored port."
::= { pmNewCfgPortMonitorEntry 3 }
pmNewCfgPmirrDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned."
::= { pmNewCfgPortMonitorEntry 4 }
pmNewCfgPmonDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the monitor
port. When read, other(1) is returned."
::= { pmNewCfgPortMonitorEntry 10 }
-- MST Configuration
mstCurCfgRegionName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Name for the Region's configuration."
::= { mstGeneralCfg 3 }
mstNewCfgRegionName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name for the Region's configuration."
::= { mstGeneralCfg 4 }
mstCurCfgRegionRevision OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Revision of the MST Region."
::= { mstGeneralCfg 5 }
mstNewCfgRegionRevision OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Revision of the MST Region."
::= { mstGeneralCfg 6 }
mstCurCfgMaxHopCount OBJECT-TYPE
SYNTAX INTEGER (4..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum hop count value."
::= { mstGeneralCfg 7 }
mstNewCfgMaxHopCount OBJECT-TYPE
SYNTAX INTEGER (4..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum hop count value."
::= { mstGeneralCfg 8 }
mstCurCfgStpMode OBJECT-TYPE
SYNTAX INTEGER {
mstp(1),
rstp(2),
pvrst(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of Spanning Tree Protocal the bridge is currently
running."
::= { mstGeneralCfg 9 }
mstNewCfgStpMode OBJECT-TYPE
SYNTAX INTEGER {
mstp(1),
rstp(2),
pvrst(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of Spanning Tree Protocal the bridge is currently
running."
::= { mstGeneralCfg 10 }
mstCistDefaultCfg OBJECT-TYPE
SYNTAX INTEGER {
default(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value to default(1) will set the Multiple
Spanning Tree and member parameters to default. default(1) is
always returned when read, but it does not mean anything."
::= { mstCistCfg 1 }
-- CIST Brige Configuration
mstCistBridgeCfg OBJECT IDENTIFIER ::= { mstCistCfg 2 }
mstCistCurCfgBridgePriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the writable portion of the Brigde Identifier comprising
of the first two octets."
::= { mstCistBridgeCfg 1 }
mstCistNewCfgBridgePriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the writable portion of the Brigde Identifier comprising
of the first two octets."
::= { mstCistBridgeCfg 2 }
mstCistCurCfgBridgeMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { mstCistBridgeCfg 5 }
mstCistNewCfgBridgeMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { mstCistBridgeCfg 6 }
mstCistCurCfgBridgeForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { mstCistBridgeCfg 7 }
mstCistNewCfgBridgeForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { mstCistBridgeCfg 8 }
mstCistCurCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the CIST group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4094.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented vlan applied to the CIST group.
0 - The represented vlan not applied to the group"
::= { mstCistBridgeCfg 9 }
mstCistNewCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the CIST group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4094.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented vlan applied to the CIST group.
0 - The represented vlan not applied to the group"
::= { mstCistBridgeCfg 10 }
mstCistNewCfgAddVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vlan to be added to the CIST Group. A
'0' value is returned when read."
::= { mstCistBridgeCfg 11 }
-- CIST Port Configuration
mstCistCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstCistCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CIST Port configuration."
::= { mstCistCfg 3 }
mstCistCurCfgPortTableEntry OBJECT-TYPE
SYNTAX MstCistCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CIST Port configuration."
INDEX { mstCistCurCfgPortIndex }
::= { mstCistCurCfgPortTable 1 }
MstCistCurCfgPortTableEntry ::= SEQUENCE {
mstCistCurCfgPortIndex PortNumber,
mstCistCurCfgPortPriority INTEGER,
mstCistCurCfgPortPathCost INTEGER,
mstCistCurCfgPortLinkType INTEGER,
mstCistCurCfgPortEdge INTEGER,
mstCistCurCfgPortStpState INTEGER,
mstCistCurCfgPortHelloTime INTEGER
, mstCistCurCfgPortPvstProtection INTEGER
}
mstCistCurCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry contains spanning
tree configuration."
::= { mstCistCurCfgPortTableEntry 1 }
mstCistCurCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value."
::= { mstCistCurCfgPortTableEntry 2 }
mstCistCurCfgPortPathCost OBJECT-TYPE
SYNTAX INTEGER (0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards
the CIST Root which include this port."
::= { mstCistCurCfgPortTableEntry 3 }
mstCistCurCfgPortLinkType OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
p2p(2),
shared(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that this port should be treated as
having a shared media connection. A value of auto(1) indicates that
this port is considered to have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the MAC
entity is configured for full duplex operation, either through
auto-negotiation or by management means. (for MSTP only)"
::= { mstCistCurCfgPortTableEntry 4 }
mstCistCurCfgPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Edge Port parameter. (for MSTP only)"
::= { mstCistCurCfgPortTableEntry 5 }
mstCistCurCfgPortStpState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn port's Spanning Tree on/off."
::= { mstCistCurCfgPortTableEntry 6 }
mstCistCurCfgPortHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration Port
PDUs in seconds."
::= { mstCistCurCfgPortTableEntry 7 }
mstCistCurCfgPortPvstProtection OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the PVST Protection parameter."
::= { mstCistCurCfgPortTableEntry 8 }
mstCistNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstCistNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CIST Port configuration."
::= { mstCistCfg 4 }
mstCistNewCfgPortTableEntry OBJECT-TYPE
SYNTAX MstCistNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CIST Port configuration."
INDEX { mstCistNewCfgPortIndex }
::= { mstCistNewCfgPortTable 1 }
MstCistNewCfgPortTableEntry ::= SEQUENCE {
mstCistNewCfgPortIndex PortNumber,
mstCistNewCfgPortPriority INTEGER,
mstCistNewCfgPortPathCost INTEGER,
mstCistNewCfgPortStpState INTEGER,
mstCistNewCfgPortHelloTime INTEGER
, mstCistNewCfgPortPvstProtection INTEGER
}
mstCistNewCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry contains spanning
tree configuration."
::= { mstCistNewCfgPortTableEntry 1 }
mstCistNewCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value."
::= { mstCistNewCfgPortTableEntry 2 }
mstCistNewCfgPortPathCost OBJECT-TYPE
SYNTAX INTEGER (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards
the CIST Root which include this port."
::= { mstCistNewCfgPortTableEntry 3 }
mstCistNewCfgPortStpState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn port's Spanning Tree on/off."
::= { mstCistNewCfgPortTableEntry 6 }
mstCistNewCfgPortHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration Port
PDUs in seconds."
::= { mstCistNewCfgPortTableEntry 7 }
mstCistNewCfgPortPvstProtection OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the PVST Protection parameter."
::= { mstCistNewCfgPortTableEntry 8 }
-- L2 general
pvstCompatibilityCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable PVST+ compatibility"
::= { l2GeneralCfg 9 }
pvstCompatibilityNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable PVST+ compatibility"
::= { l2GeneralCfg 10 }
nostpCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STP Mode Disable global state."
::= { l2GeneralCfg 11 }
nostpNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable STP Mode Disable."
::= { l2GeneralCfg 12 }
stpLoopGuardCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STP loop guard global state."
::= { l2GeneralCfg 13 }
stpLoopGuardNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable STP loop guard."
::= { l2GeneralCfg 14 }
vlanAutoStgCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN automatic STG assignment global state."
::= { l2GeneralCfg 15 }
vlanAutoStgNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable VLAN automatic STG assignment."
::= { l2GeneralCfg 16 }
--
-- { LLDP Port Table
--
lldpPortTableMaxEnt OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the port configuration
host table."
::= { lldpCfg 1 }
lldpCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpCurCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LLDP port configuration in the current_configuration
block."
::= { lldpCfg 2 }
lldpCurCfgPortEntry OBJECT-TYPE
SYNTAX LldpCurCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LLDP port configuration table in the
current_configuration block."
INDEX { lldpCurCfgPortIndx }
::= { lldpCurCfgPortTable 1 }
LldpCurCfgPortEntry ::= SEQUENCE {
lldpCurCfgPortIndx PortNumber,
lldpCurCfgPortAdmStat INTEGER,
lldpCurCfgPortSnmpTrap INTEGER
,lldpCurCfgPortportdesctlv INTEGER
,lldpCurCfgPortsysnametlv INTEGER
,lldpCurCfgPortsysdescrtlv INTEGER
,lldpCurCfgPortsyscaptlv INTEGER
,lldpCurCfgPortmgmtaddrtlv INTEGER
,lldpCurCfgPortportvidtlv INTEGER
,lldpCurCfgPortportprottlv INTEGER
,lldpCurCfgPortvlannametlv INTEGER
,lldpCurCfgPortprotidtlv INTEGER
,lldpCurCfgPortmacphytlv INTEGER
,lldpCurCfgPortpowermditlv INTEGER
,lldpCurCfgPortlinkaggrtlv INTEGER
,lldpCurCfgPortframesztlv INTEGER
,lldpCurCfgPortdcbxtlv INTEGER
}
lldpCurCfgPortIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in LLDP port configurations table."
::= { lldpCurCfgPortEntry 1 }
lldpCurCfgPortAdmStat OBJECT-TYPE
SYNTAX INTEGER {
enabledTxOnly(1),
enabledRxOnly(2),
enabledRxTx(3),
disabled(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the admin status of the LLDP port."
::= { lldpCurCfgPortEntry 2 }
lldpCurCfgPortSnmpTrap OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the SNMP trap notification state of the LLDP port."
::= { lldpCurCfgPortEntry 3 }
lldpCurCfgPortportdesctlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Port Description TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 4 }
lldpCurCfgPortsysnametlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the System Name TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 5 }
lldpCurCfgPortsysdescrtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the System Description TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 6 }
lldpCurCfgPortsyscaptlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the System Capabilities TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 7 }
lldpCurCfgPortmgmtaddrtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Management Address TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 8 }
lldpCurCfgPortportvidtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Port VLAN ID TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 9 }
lldpCurCfgPortportprottlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Port and Protocol VLAN ID TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 10 }
lldpCurCfgPortvlannametlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the VLAN Name TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 11 }
lldpCurCfgPortprotidtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Protocol Identity TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 12 }
lldpCurCfgPortmacphytlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the MAC/PHY Configuration/Status TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 13 }
lldpCurCfgPortpowermditlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Power Via MDI TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 14 }
lldpCurCfgPortlinkaggrtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Link Aggregation TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 15 }
lldpCurCfgPortframesztlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Maximum Frame Size TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 16 }
lldpCurCfgPortdcbxtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the DCBX TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 17 }
lldpNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpNewCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LLDP port configuration in the new_configuration
block."
::= { lldpCfg 3 }
lldpNewCfgPortEntry OBJECT-TYPE
SYNTAX LldpNewCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LLDP port configuration table in the
new_configuration block."
INDEX { lldpNewCfgPortIndx }
::= { lldpNewCfgPortTable 1 }
LldpNewCfgPortEntry ::= SEQUENCE {
lldpNewCfgPortIndx PortNumber,
lldpNewCfgPortAdmStat INTEGER,
lldpNewCfgPortSnmpTrap INTEGER
,lldpNewCfgPortportdesctlv INTEGER
,lldpNewCfgPortsysnametlv INTEGER
,lldpNewCfgPortsysdescrtlv INTEGER
,lldpNewCfgPortsyscaptlv INTEGER
,lldpNewCfgPortmgmtaddrtlv INTEGER
,lldpNewCfgPortportvidtlv INTEGER
,lldpNewCfgPortportprottlv INTEGER
,lldpNewCfgPortvlannametlv INTEGER
,lldpNewCfgPortprotidtlv INTEGER
,lldpNewCfgPortmacphytlv INTEGER
,lldpNewCfgPortpowermditlv INTEGER
,lldpNewCfgPortlinkaggrtlv INTEGER
,lldpNewCfgPortframesztlv INTEGER
,lldpNewCfgPortalltlv INTEGER
,lldpNewCfgPortdcbxtlv INTEGER
}
lldpNewCfgPortIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in LLDP port configurations table."
::= { lldpNewCfgPortEntry 1 }
lldpNewCfgPortAdmStat OBJECT-TYPE
SYNTAX INTEGER {
enabledTxOnly(1),
enabledRxOnly(2),
enabledRxTx(3),
disabled(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the admin status of the LLDP port."
::= { lldpNewCfgPortEntry 2 }
lldpNewCfgPortSnmpTrap OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the SNMP trap notification state of the LLDP port"
::= { lldpNewCfgPortEntry 3 }
lldpNewCfgPortportdesctlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Port Description TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 4 }
lldpNewCfgPortsysnametlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the System Name TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 5 }
lldpNewCfgPortsysdescrtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the System Description TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 6 }
lldpNewCfgPortsyscaptlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the System Capabilities TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 7 }
lldpNewCfgPortmgmtaddrtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Management Address TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 8 }
lldpNewCfgPortportvidtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Port VLAN ID TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 9 }
lldpNewCfgPortportprottlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Port and Protocol VLAN ID TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 10 }
lldpNewCfgPortvlannametlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the VLAN Name TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 11 }
lldpNewCfgPortprotidtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Protocol Identity TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 12 }
lldpNewCfgPortmacphytlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the MAC/PHY Configuration/Status TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 13 }
lldpNewCfgPortpowermditlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Power Via MDI TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 14 }
lldpNewCfgPortlinkaggrtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Link Aggregation TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 15 }
lldpNewCfgPortframesztlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Maximum Frame Size TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 16 }
lldpNewCfgPortalltlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2),
other(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the corresponding state for all the LLDP port's TLVs.
other(3) is returned when the object is read."
::= { lldpNewCfgPortEntry 17 }
lldpNewCfgPortdcbxtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the DCBX TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 18 }
--
-- } End of LLDP Port Table
--
--
-- { LLDP General Table
--
lldpGeneral OBJECT IDENTIFIER ::= { lldpCfg 4 }
lldpCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LLDP global state."
::= { lldpGeneral 1 }
lldpNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Globally turn LLDP on or off."
::= { lldpGeneral 2 }
lldpCurCfgMsgTxInt OBJECT-TYPE
SYNTAX INTEGER (5..32768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LLDP message transmission interval for LLDPDU."
::= { lldpGeneral 3 }
lldpNewCfgMsgTxInt OBJECT-TYPE
SYNTAX INTEGER (5..32768)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LLDP message transmission interval for LLDPDU."
::= { lldpGeneral 4 }
lldpCurCfgMsgTxHld OBJECT-TYPE
SYNTAX INTEGER (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LLDP message transmission holdtime-multiplier."
::= { lldpGeneral 5 }
lldpNewCfgMsgTxHld OBJECT-TYPE
SYNTAX INTEGER (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LLDP message transmission holdtime-multiplier."
::= { lldpGeneral 6 }
lldpCurCfgNotifInt OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LLDP minimum SNMP trap notification interval."
::= { lldpGeneral 7 }
lldpNewCfgNotifInt OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LLDP minimum SNMP trap notification interval."
::= { lldpGeneral 8 }
lldpCurCfgTxDelay OBJECT-TYPE
SYNTAX INTEGER (1..8192)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LLDP delay interval between advertisements."
::= { lldpGeneral 9 }
lldpNewCfgTxDelay OBJECT-TYPE
SYNTAX INTEGER (1..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LLDP delay interval between advertisements."
::= { lldpGeneral 10 }
lldpCurCfgReinitDelay OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LLDP reinit delay interval."
::= { lldpGeneral 11 }
lldpNewCfgReinitDelay OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LLDP reinit delay interval."
::= { lldpGeneral 12 }
--
-- } End of LLDP General Table
--
--
-- { LLDP Statistics
--
lldpStatsTableMaxEnt OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the statistics
host table."
::= { lldpStats 1 }
lldpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LLDP statistics."
::= { lldpStats 2 }
lldpStatsClearAll OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the LLDP statistics
for all the ports."
::= { lldpStats 3 }
lldpStatsTableEntry OBJECT-TYPE
SYNTAX LldpStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP statistics info."
INDEX { lldpStatsIndex }
::= { lldpStatsTable 1 }
LldpStatsTableEntry ::= SEQUENCE {
lldpStatsIndex PortNumber,
lldpStatsFramesOutTotal Counter32,
lldpStatsFramesInTotal Counter32,
lldpStatsFramesInErrorsTotal Counter32,
lldpStatsFramesDiscardedTotal Counter32,
lldpStatsTLVsUnrecognizedTotal Counter32,
lldpStatsAgeoutsTotal Counter32,
lldpStatsClear INTEGER
}
lldpStatsIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in LLDP port statistics."
::= { lldpStatsTableEntry 1 }
lldpStatsFramesOutTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of LLDP frames transmitted in this port."
::= { lldpStatsTableEntry 2 }
lldpStatsFramesInTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of LLDP frames received in this port."
::= { lldpStatsTableEntry 3 }
lldpStatsFramesInErrorsTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of erroneous LLDP frames received in this port."
::= { lldpStatsTableEntry 4 }
lldpStatsFramesDiscardedTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of received LLDP frames discarded in this port."
::= { lldpStatsTableEntry 5 }
lldpStatsTLVsUnrecognizedTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized TLVs in this port."
::= { lldpStatsTableEntry 6 }
lldpStatsAgeoutsTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of neighbor's information deleted in this port."
::= { lldpStatsTableEntry 7 }
lldpStatsClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the LLDP statistics."
::= { lldpStatsTableEntry 8 }
--
-- } End of LLDP Statistics
--
--
-- { LLDP Info
--
lldpInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LLDP Port Info."
::= { lldpInfo 1 }
lldpInfoPortEntry OBJECT-TYPE
SYNTAX LldpInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP Port Info."
INDEX { lldpInfoPortIndex }
::= { lldpInfoPortTable 1 }
LldpInfoPortEntry ::= SEQUENCE {
lldpInfoPortIndex PortNumber,
lldpInfoPortAlias DisplayString,
lldpInfoPortMacAddress PhysAddress,
lldpInfoPortMtu Integer32,
lldpInfoPortEnabled INTEGER,
lldpInfoPortAdminStatus INTEGER,
lldpInfoPortRxChanges INTEGER
,lldpInfoPortportdesctlv INTEGER
,lldpInfoPortsysnametlv INTEGER
,lldpInfoPortsysdescrtlv INTEGER
,lldpInfoPortsyscaptlv INTEGER
,lldpInfoPortmgmtaddrtlv INTEGER
,lldpInfoPortportvidtlv INTEGER
,lldpInfoPortportprottlv INTEGER
,lldpInfoPortvlannametlv INTEGER
,lldpInfoPortprotidtlv INTEGER
,lldpInfoPortmacphytlv INTEGER
,lldpInfoPortpowermditlv INTEGER
,lldpInfoPortlinkaggrtlv INTEGER
,lldpInfoPortframesztlv INTEGER
,lldpInfoPortdcbxtlv INTEGER
}
lldpInfoPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in LLDP info port table."
::= { lldpInfoPortEntry 1 }
lldpInfoPortAlias OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias of the port in LLDP info port table."
::= { lldpInfoPortEntry 2 }
lldpInfoPortMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mac address of the port in LLDP info port table."
::= { lldpInfoPortEntry 3 }
lldpInfoPortMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MTU size of the port in LLDP info port table."
::= { lldpInfoPortEntry 4 }
lldpInfoPortEnabled OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PortEnabled field of the port in LLDP info port table."
::= { lldpInfoPortEntry 5 }
lldpInfoPortAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabledTxOnly(1),
enabledRxOnly(2),
enabledRxTx(3),
disabled(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Admin Status of the port in LLDP info port table."
::= { lldpInfoPortEntry 6 }
lldpInfoPortRxChanges OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rxChanges field of the port in LLDP info port table."
::= { lldpInfoPortEntry 7 }
lldpInfoPortportdesctlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Port Description TLV state of the LLDP port."
::= { lldpInfoPortEntry 8 }
lldpInfoPortsysnametlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the System Name TLV state of the LLDP port."
::= { lldpInfoPortEntry 9 }
lldpInfoPortsysdescrtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the System Description TLV state of the LLDP port."
::= { lldpInfoPortEntry 10 }
lldpInfoPortsyscaptlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the System Capabilities TLV state of the LLDP port."
::= { lldpInfoPortEntry 11 }
lldpInfoPortmgmtaddrtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Management Address TLV state of the LLDP port."
::= { lldpInfoPortEntry 12 }
lldpInfoPortportvidtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Port VLAN ID TLV state of the LLDP port."
::= { lldpInfoPortEntry 13 }
lldpInfoPortportprottlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Port and Protocol VLAN ID TLV state of the LLDP port."
::= { lldpInfoPortEntry 14 }
lldpInfoPortvlannametlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the VLAN Name TLV state of the LLDP port."
::= { lldpInfoPortEntry 15 }
lldpInfoPortprotidtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Protocol Identity TLV state of the LLDP port."
::= { lldpInfoPortEntry 16 }
lldpInfoPortmacphytlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the MAC/PHY Configuration/Status TLV state of the LLDP port."
::= { lldpInfoPortEntry 17 }
lldpInfoPortpowermditlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Power Via MDI TLV state of the LLDP port."
::= { lldpInfoPortEntry 18 }
lldpInfoPortlinkaggrtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Link Aggregation TLV state of the LLDP port."
::= { lldpInfoPortEntry 19 }
lldpInfoPortframesztlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Maximum Frame Size TLV state of the LLDP port."
::= { lldpInfoPortEntry 20 }
lldpInfoPortdcbxtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the DCBX TLV state of the LLDP port."
::= { lldpInfoPortEntry 21 }
lldpInfoTxTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpInfoTxEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LLDP Transmit State Machine Info."
::= { lldpInfo 2 }
lldpInfoTxEntry OBJECT-TYPE
SYNTAX LldpInfoTxEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP Transmit State Machine Info."
INDEX { lldpInfoTxIndex }
::= { lldpInfoTxTable 1 }
LldpInfoTxEntry ::= SEQUENCE {
lldpInfoTxIndex PortNumber,
lldpInfoTxState INTEGER,
lldpInfoTxLocalChanged INTEGER,
lldpInfoTxTTL Integer32,
lldpInfoTxTxTTR Integer32,
lldpInfoTxDelayWhile Integer32,
lldpInfoTxShutdownWhile Integer32,
lldpInfoTxReinitDelay Integer32,
lldpInfoTxHoldMultiplier Integer32,
lldpInfoTxTransmitInterval Integer32,
lldpInfoTxTransmitDelay Integer32,
lldpInfoTxDMAC DisplayString
}
lldpInfoTxIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in LLDP Transmit State Machine info table."
::= { lldpInfoTxEntry 1 }
lldpInfoTxState OBJECT-TYPE
SYNTAX INTEGER {
txLldpInitialize(1),
txIdle(2),
txShutdownFrame(3),
txInfoFrame(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit state of the port in LLDP Transmit State Machine."
::= { lldpInfoTxEntry 2 }
lldpInfoTxLocalChanged OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The somethingChangedLocal field of the port in LLDP Transmit
State Machine."
::= { lldpInfoTxEntry 3 }
lldpInfoTxTTL OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The txTTL timer of the port in LLDP Transmit State Machine."
::= { lldpInfoTxEntry 4 }
lldpInfoTxTxTTR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The txTTR timer of the port in LLDP Transmit State Machine."
::= { lldpInfoTxEntry 5 }
lldpInfoTxDelayWhile OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The txDelayWhile timer of the port in LLDP Transmit State
Machine."
::= { lldpInfoTxEntry 6 }
lldpInfoTxShutdownWhile OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The txShutdownWhile timer of the port in LLDP Transmit State
Machine."
::= { lldpInfoTxEntry 7 }
lldpInfoTxReinitDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reinitDelay timer of the port in LLDP Transmit State
Machine."
::= { lldpInfoTxEntry 8 }
lldpInfoTxHoldMultiplier OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The msgTxHold timer of the port in LLDP Transmit State
Machine."
::= { lldpInfoTxEntry 9 }
lldpInfoTxTransmitInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The msgTxInterval timer of the port in LLDP Transmit State
Machine."
::= { lldpInfoTxEntry 10 }
lldpInfoTxTransmitDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The txDelay timer of the port in LLDP Transmit State Machine."
::= { lldpInfoTxEntry 11 }
lldpInfoTxDMAC OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Customer Bridge - 01-80-C2-00-00-00"
::= { lldpInfoTxEntry 12 }
lldpInfoRxTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpInfoRxEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LLDP Receive State Machine Info."
::= { lldpInfo 3 }
lldpInfoRxEntry OBJECT-TYPE
SYNTAX LldpInfoRxEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP Receive State Machine Info."
INDEX { lldpInfoRxIndex }
::= { lldpInfoRxTable 1 }
LldpInfoRxEntry ::= SEQUENCE {
lldpInfoRxIndex PortNumber,
lldpInfoRxState INTEGER,
lldpInfoRxBadFrame INTEGER,
lldpInfoRxRcvFrame INTEGER,
lldpInfoRxRxInfoAge INTEGER,
lldpInfoRxRemoteChanged INTEGER,
lldpInfoRxTooManyNeighbors INTEGER,
lldpInfoRxSNMPNotify INTEGER,
lldpInfoRxRxTTL Integer32,
lldpInfoRxTooManyNeighborTimer Integer32,
lldpInfoRxDMAC DisplayString
}
lldpInfoRxIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in LLDP Receive State Machine info table."
::= { lldpInfoRxEntry 1 }
lldpInfoRxState OBJECT-TYPE
SYNTAX INTEGER {
lldpWaitPortOperational(1),
deleteAgedInfo(2),
rxLldpInitialize(3),
rxWaitForFrame(4),
rxFrame(5),
deleteInfo(6),
updateInfo(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The receive state of the port in LLDP Receive State Machine."
::= { lldpInfoRxEntry 2 }
lldpInfoRxBadFrame OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The badFrame field of the port in LLDP Receive State Machine."
::= { lldpInfoRxEntry 3 }
lldpInfoRxRcvFrame OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rcvFrame field of the port in LLDP Receive State Machine."
::= { lldpInfoRxEntry 4 }
lldpInfoRxRxInfoAge OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rxInfoAge field of the port in LLDP Receive State Machine."
::= { lldpInfoRxEntry 5 }
lldpInfoRxRemoteChanged OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The somethingChangedRemote field of the port in LLDP Receive
State Machine."
::= { lldpInfoRxEntry 6 }
lldpInfoRxTooManyNeighbors OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tooManyNeighbors field of the port in LLDP Receive
State Machine."
::= { lldpInfoRxEntry 7 }
lldpInfoRxSNMPNotify OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tooManyNeighbors field of the port in LLDP Receive
State Machine."
::= { lldpInfoRxEntry 8 }
lldpInfoRxRxTTL OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rxTTL timer of the port in LLDP Receive State Machine."
::= { lldpInfoRxEntry 9 }
lldpInfoRxTooManyNeighborTimer OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tooManyNeighborsTimer timer of the port in LLDP Receive State
Machine."
::= { lldpInfoRxEntry 10 }
lldpInfoRxDMAC OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Customer Bridge - 01-80-C2-00-00-00"
::= { lldpInfoRxEntry 11 }
lldpInfoRemoteDevicesTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpInfoRemoteDevicesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LLDP remote devices Info."
::= { lldpInfo 4 }
lldpInfoRemoteDevicesEntry OBJECT-TYPE
SYNTAX LldpInfoRemoteDevicesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP remote devices Info."
INDEX { lldpInfoRemoteDevicesIndex }
::= { lldpInfoRemoteDevicesTable 1 }
LldpInfoRemoteDevicesEntry ::= SEQUENCE {
lldpInfoRemoteDevicesIndex INTEGER,
lldpInfoRemoteDevicesRemoteTTL Integer32,
lldpInfoRemoteDevicesRxChanges INTEGER,
lldpInfoRemoteDevicesLocalPort DisplayString,
lldpInfoRemoteDevicesChassisSubtype INTEGER,
lldpInfoRemoteDevicesChassisId DisplayString,
lldpInfoRemoteDevicesPortSubtype INTEGER,
lldpInfoRemoteDevicesPortId DisplayString,
lldpInfoRemoteDevicesSystemName DisplayString,
lldpInfoRemoteDevicesSystemDescription DisplayString,
lldpInfoRemoteDevicesPortDescription DisplayString,
lldpInfoRemoteDevicesSystemCapSupported DisplayString,
lldpInfoRemoteDevicesSystemCapEnabled DisplayString,
lldpInfoRemoteDMAC DisplayString
}
lldpInfoRemoteDevicesIndex OBJECT-TYPE
SYNTAX INTEGER (1..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in LLDP remote devices info table."
::= { lldpInfoRemoteDevicesEntry 1 }
-- lldpInfoMsapMagicNumber OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The magic number of the LLDP MSAP entry."
-- ::= { lldpInfoRemoteDevicesEntry 2 }
lldpInfoRemoteDevicesRemoteTTL OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote TTL of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 3 }
lldpInfoRemoteDevicesRxChanges OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rxChanges field of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 4 }
lldpInfoRemoteDevicesLocalPort OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local port alias of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 5 }
lldpInfoRemoteDevicesChassisSubtype OBJECT-TYPE
SYNTAX INTEGER {
chassisComponent(1),
interfaceAlias(2),
portComponent(3),
macAddress(4),
networkAddress(5),
interfaceName(6),
locallyAssigned(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The chassis ID subtype of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 6 }
lldpInfoRemoteDevicesChassisId OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The chassis ID of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 7 }
lldpInfoRemoteDevicesPortSubtype OBJECT-TYPE
SYNTAX INTEGER {
interfaceAlias(1),
portComponent(2),
macAddress(3),
networkAddress(4),
interfaceName(5),
agentCircuitId(6),
locallyAssigned(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port ID subtype of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 8 }
lldpInfoRemoteDevicesPortId OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port ID of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 9 }
lldpInfoRemoteDevicesSystemName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system name of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 10 }
lldpInfoRemoteDevicesSystemDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system description of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 11 }
lldpInfoRemoteDevicesPortDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port description of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 12 }
lldpInfoRemoteDevicesSystemCapSupported OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The supported system capabilities of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 13 }
lldpInfoRemoteDevicesSystemCapEnabled OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The enabled system capabilities of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 14 }
lldpInfoRemoteDMAC OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Customer Bridge - 01-80-C2-00-00-00"
::= { lldpInfoRemoteDevicesEntry 15 }
--
-- lldpInfoRemoteDevicesManAddrTable : Management addresses of remote system
--
lldpInfoRemoteDevicesManAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpInfoRemoteDevicesManAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LLDP remote devices management address Info."
::= { lldpInfo 5 }
lldpInfoRemoteDevicesManAddrEntry OBJECT-TYPE
SYNTAX LldpInfoRemoteDevicesManAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP remote devices management address Info."
INDEX { lldpInfoRemoteDevicesIndex,
lldpInfoRemoteDevicesManAddrSubtype,
lldpInfoRemoteDevicesManAddr
}
::= { lldpInfoRemoteDevicesManAddrTable 1 }
LldpInfoRemoteDevicesManAddrEntry ::= SEQUENCE {
lldpInfoRemoteDevicesManAddrSubtype INTEGER,
lldpInfoRemoteDevicesManAddr DisplayString,
lldpInfoRemoteDevicesManAddrIfSubtype INTEGER,
lldpInfoRemoteDevicesManAddrIfId Integer32,
lldpInfoRemoteDevicesManAddrOID DisplayString
}
lldpInfoRemoteDevicesManAddrSubtype OBJECT-TYPE
SYNTAX INTEGER {
other(0),
ipV4(1),
ipV6(2),
nsap(3),
hdlc(4),
bbn1822(5),
all802(6),
e163(7),
e164(8),
f69(9),
x121(10),
ipx(11),
appletalk(12),
decnetIV(13),
banyanVines(14),
e164withNsap(15),
dns(16),
distinguishedname(17),
asnumber(18),
xtpoveripv4(19),
xtpoveripv6(20),
xtpnativemodextp(21),
reserved(65535)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management address subtype of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesManAddrEntry 1 }
lldpInfoRemoteDevicesManAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management address of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesManAddrEntry 2 }
lldpInfoRemoteDevicesManAddrIfSubtype OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
ifIndex(2),
systemPortNumber(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface numbering subtype of the LLDP remote devices
management address entry."
::= { lldpInfoRemoteDevicesManAddrEntry 3 }
lldpInfoRemoteDevicesManAddrIfId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number of the LLDP remote devices management address
entry."
::= { lldpInfoRemoteDevicesManAddrEntry 4 }
lldpInfoRemoteDevicesManAddrOID OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object identifier of the LLDP remote devices management address
entry."
::= { lldpInfoRemoteDevicesManAddrEntry 5 }
lldpClearMsap OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
clearMsap(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear LLDP remote devices information when setting clearMsap(1).
When read, ok(0) is always returned."
::= { lldpInfo 6 }
--
-- } End of LLDP Info
--
--
-- { UDLD
--
udldInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF UdldInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of UDLD port info."
::= { udldInfo 1 }
udldInfoPortEntry OBJECT-TYPE
SYNTAX UdldInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row inside UDLD port info table."
INDEX { udldInfoPortIndex }
::= { udldInfoPortTable 1 }
UdldInfoPortEntry ::= SEQUENCE
{ udldInfoPortIndex PortNumber
, udldInfoPortConfig INTEGER
, udldInfoPortMode INTEGER
, udldInfoPortLink INTEGER
, udldInfoPortOperationalStatus INTEGER
, udldInfoPortBidirectionalStatus INTEGER
, udldInfoPortInterval INTEGER
, udldInfoPortTimeout INTEGER
, udldInfoPortNeighborCount INTEGER
}
udldInfoPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in UDLD port configuration table."
::= { udldInfoPortEntry 1 }
udldInfoPortConfig OBJECT-TYPE
SYNTAX INTEGER
{ enabled(1)
, disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Config field of the port in UDLD port info table.
Shows the administative state of the current port."
::= { udldInfoPortEntry 2 }
udldInfoPortMode OBJECT-TYPE
SYNTAX INTEGER
{ aggresive(1)
, normal(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Mode field of the port in UDLD info port table.
Shows the udld administrative mode for the current port."
::= { udldInfoPortEntry 3 }
udldInfoPortLink OBJECT-TYPE
SYNTAX INTEGER
{ up(1)
, down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Link field of the port in UDLD info port table.
Shows the state of the link associated with the port."
::= { udldInfoPortEntry 4 }
udldInfoPortOperationalStatus OBJECT-TYPE
SYNTAX INTEGER
{ init(1)
, inactive(2)
, linkup(3)
, advertisement(4)
, detection(5)
, extDetection(6)
, shutdown(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OperationalStatus field of the port in UDLD info port table.
Contains the udld operational state for the current port."
::= { udldInfoPortEntry 5 }
udldInfoPortBidirectionalStatus OBJECT-TYPE
SYNTAX INTEGER
{ unknown(1)
, unidirectional(2)
, bidirectional(3)
, loop(4)
, neighborMismatch(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BidirectionalStatus field of the port in UDLD info port table.
Contains the udld bidirectional state for the current port."
::= { udldInfoPortEntry 6 }
udldInfoPortInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Interval field of the port in UDLD info port table.
The duration, measured in seconds, of the interval during which
UDLD probes are sent, after the linkup or detection phases.
Its time unit is 1 second."
::= { udldInfoPortEntry 7 }
udldInfoPortTimeout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Timeout field of the port in UDLD info port table.
Length of the detection phase, measured in seconds."
::= { udldInfoPortEntry 8}
udldInfoPortNeighborCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Neighbor field of the port in UDLD info port table.
Contains the number of udld neighbors for the current port."
::= { udldInfoPortEntry 9 }
udldInfoNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF UdldInfoNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of UDLD port neighbor info."
::= { udldInfo 2 }
udldInfoNeighborEntry OBJECT-TYPE
SYNTAX UdldInfoNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row inside UDLD port info table."
INDEX { udldInfoNeighborLocalPortIndex, udldInfoNeighborIndex }
::= { udldInfoNeighborTable 1 }
UdldInfoNeighborEntry ::= SEQUENCE
{ udldInfoNeighborLocalPortIndex PortNumber
, udldInfoNeighborIndex Integer32
, udldInfoNeighborExpiration INTEGER
, udldInfoNeighborDeviceName DisplayString
, udldInfoNeighborDeviceID DisplayString
, udldInfoNeighborPortID DisplayString
}
udldInfoNeighborLocalPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port for which neighbor information
will be returned."
::= { udldInfoNeighborEntry 1 }
udldInfoNeighborIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the target neighbor among the port neighbors."
::= { udldInfoNeighborEntry 2 }
udldInfoNeighborExpiration OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hold time for the given neighbor."
::= { udldInfoNeighborEntry 3 }
udldInfoNeighborDeviceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device name reported by neigbor."
::= { udldInfoNeighborEntry 4 }
udldInfoNeighborDeviceID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device ID reported by neigbor."
::= { udldInfoNeighborEntry 5 }
udldInfoNeighborPortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port ID reported by neigbor."
::= { udldInfoNeighborEntry 6 }
--
-- } End of UDLD Info
--
-- FDB
fdbCurCfgStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdbCurCfgStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FDB static entries."
::= { fdb 2 }
fdbCurCfgStaticEntry OBJECT-TYPE
SYNTAX FdbCurCfgStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the fdb table."
INDEX { fdbCurCfgEntryIndex }
::= { fdbCurCfgStaticTable 1 }
FdbCurCfgStaticEntry ::= SEQUENCE {
fdbCurCfgEntryIndex Integer32,
fdbCurCfgVlan Integer32,
fdbCurCfgPort PortNumber,
fdbCurCfgMac PhysAddress
,fdbCurCfgTrunk Integer32
,fdbCurCfgAdminkey Integer32
}
fdbCurCfgEntryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fdb entry index"
::= { fdbCurCfgStaticEntry 1 }
fdbCurCfgVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Add vlan for fdb entry index"
::= { fdbCurCfgStaticEntry 2 }
fdbCurCfgPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address port number."
::= { fdbCurCfgStaticEntry 3 }
fdbCurCfgMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Add a fdb entry."
::= { fdbCurCfgStaticEntry 4 }
fdbCurCfgTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address trunk number."
::= { fdbCurCfgStaticEntry 5 }
fdbCurCfgAdminkey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address LACP trunk adminkey."
::= { fdbCurCfgStaticEntry 6 }
fdbNewCfgStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdbNewCfgStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FDB static entries."
::= { fdb 3 }
fdbNewCfgStaticEntry OBJECT-TYPE
SYNTAX FdbNewCfgStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the fdb table."
INDEX { fdbNewCfgEntryIndex }
::= { fdbNewCfgStaticTable 1 }
FdbNewCfgStaticEntry ::= SEQUENCE {
fdbNewCfgEntryIndex Integer32,
fdbNewCfgAddVlan Integer32,
fdbNewCfgAddPort PortNumber,
fdbNewCfgAddTrunk Integer32,
fdbNewCfgAddAdminkey Integer32,
fdbNewCfgAddMac PhysAddress,
fdbNewCfgDelStaticEntry INTEGER
}
fdbNewCfgEntryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fdb entry index"
::= { fdbNewCfgStaticEntry 1 }
fdbNewCfgAddVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add vlan for fdb entry index"
::= { fdbNewCfgStaticEntry 2 }
fdbNewCfgAddPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC address port number."
::= { fdbNewCfgStaticEntry 3 }
fdbNewCfgAddMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add a fdb entry, ex:0x00 0x01 0x02 0x03 0x04 0x05"
::= { fdbNewCfgStaticEntry 4 }
fdbNewCfgDelStaticEntry OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { fdbNewCfgStaticEntry 5 }
fdbNewCfgAddTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC address trunk number."
::= { fdbNewCfgStaticEntry 6 }
fdbNewCfgAddAdminkey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC address LACP trunk adminkey."
::= { fdbNewCfgStaticEntry 7 }
-- Multicast FDB
mcastFdbCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF McastFdbCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of multicast FDB static entries."
::= { fdb 8 }
mcastFdbCurCfgEntry OBJECT-TYPE
SYNTAX McastFdbCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the multicast fdb table."
INDEX { mcastFdbCurCfgEntryIndex }
::= { mcastFdbCurCfgTable 1 }
McastFdbCurCfgEntry ::= SEQUENCE {
mcastFdbCurCfgEntryIndex Integer32,
mcastFdbCurCfgVlan Integer32,
mcastFdbCurCfgPorts PortNumber,
mcastFdbCurCfgMac MacAddress
}
mcastFdbCurCfgEntryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast fdb entry index"
::= { mcastFdbCurCfgEntry 1 }
mcastFdbCurCfgVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Add vlan for multicast fdb entry index"
::= { mcastFdbCurCfgEntry 2 }
mcastFdbCurCfgPorts OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast MAC address port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the multicast MAC address.
0 - The represented port does not belong to the multicast MAC address."
::= { mcastFdbCurCfgEntry 3 }
mcastFdbCurCfgMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Add a multicast fdb entry."
::= { mcastFdbCurCfgEntry 4 }
mcastFdbNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF McastFdbNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of multicast FDB static entries."
::= { fdb 9 }
mcastFdbNewCfgEntry OBJECT-TYPE
SYNTAX McastFdbNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the multicast fdb table."
INDEX { mcastFdbNewCfgEntryIndex }
::= { mcastFdbNewCfgTable 1 }
McastFdbNewCfgEntry ::= SEQUENCE {
mcastFdbNewCfgEntryIndex Integer32,
mcastFdbNewCfgAddVlan Integer32,
mcastFdbNewCfgPorts OCTET STRING,
mcastFdbNewCfgAddPort PortNumber,
mcastFdbNewCfgRemPort PortNumber,
mcastFdbNewCfgAddMac MacAddress,
mcastFdbNewCfgDelStaticEntry INTEGER
}
mcastFdbNewCfgEntryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast fdb entry index"
::= { mcastFdbNewCfgEntry 1 }
mcastFdbNewCfgAddVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add vlan for multicast fdb entry index"
::= { mcastFdbNewCfgEntry 2 }
mcastFdbNewCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast MAC address port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the multicast MAC address.
0 - The represented port does not belong to the multicast MAC address."
::= { mcastFdbNewCfgEntry 3 }
mcastFdbNewCfgAddPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The multicast MAC address port number to be added. A '0'
value is returned when read."
::= { mcastFdbNewCfgEntry 4 }
mcastFdbNewCfgRemPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The multicast MAC address port number to be removed. A '0'
value is returned when read."
::= { mcastFdbNewCfgEntry 5 }
mcastFdbNewCfgAddMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add a multicast fdb entry, ex:0x00 0x01 0x02 0x03 0x04 0x05"
::= { mcastFdbNewCfgEntry 6 }
mcastFdbNewCfgDelStaticEntry OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { mcastFdbNewCfgEntry 7 }
oamInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF OAMInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OAM port information."
::= { oamInfo 1 }
oamInfoPortEntry OBJECT-TYPE
SYNTAX OAMInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about OAM Port"
INDEX { oamInfoPortIndex }
::= { oamInfoPortTable 1 }
OAMInfoPortEntry ::= SEQUENCE {
oamInfoPortIndex PortNumber,
oamInfoPortLocalState INTEGER,
oamInfoPortLocalMode INTEGER,
oamInfoPortLocalLinkStatus INTEGER,
oamInfoPortLocalStable INTEGER,
oamInfoPortLocalSatisfied INTEGER,
oamInfoPortLocalEvaluating INTEGER,
oamInfoPortRemoteMode INTEGER,
oamInfoPortRemoteMAC PhysAddress,
oamInfoPortRemoteStable INTEGER,
oamInfoPortRemoteStateValid INTEGER,
oamInfoPortRemoteEvaluating INTEGER
}
oamInfoPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OAM Port number for which the table is related."
::= { oamInfoPortEntry 1}
oamInfoPortLocalState OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
disabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" OAM local port state"
::= { oamInfoPortEntry 2 }
oamInfoPortLocalMode OBJECT-TYPE
SYNTAX INTEGER {
active(0),
passive(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" OAM local port mode"
::= { oamInfoPortEntry 3 }
oamInfoPortLocalLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
fail(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" OAM local port link status"
::= { oamInfoPortEntry 4 }
oamInfoPortLocalStable OBJECT-TYPE
SYNTAX INTEGER {
true(0),
false(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" OAM local port stable"
::= { oamInfoPortEntry 5 }
oamInfoPortLocalSatisfied OBJECT-TYPE
SYNTAX INTEGER {
true(0),
false(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" OAM local port satisfied"
::= { oamInfoPortEntry 6 }
oamInfoPortLocalEvaluating OBJECT-TYPE
SYNTAX INTEGER {
true(0),
false(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" OAM local port evaluating"
::= { oamInfoPortEntry 7 }
oamInfoPortRemoteMode OBJECT-TYPE
SYNTAX INTEGER {
active(0),
passive(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" OAM remote port mode"
::= { oamInfoPortEntry 8 }
oamInfoPortRemoteMAC OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" OAM remote port MAC address"
::= { oamInfoPortEntry 9 }
oamInfoPortRemoteStable OBJECT-TYPE
SYNTAX INTEGER {
true(0),
false(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" OAM remote port stable"
::= { oamInfoPortEntry 10 }
oamInfoPortRemoteStateValid OBJECT-TYPE
SYNTAX INTEGER {
true(0),
false(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" OAM remote port state valid"
::= { oamInfoPortEntry 11 }
oamInfoPortRemoteEvaluating OBJECT-TYPE
SYNTAX INTEGER {
true(0),
false(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" OAM remote port evaluating"
::= { oamInfoPortEntry 12 }
--
-- OAM Stats
--
oamStatsPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF OAMStatsPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OAM port statistics."
::= { oamStats 1 }
oamStatsPortEntry OBJECT-TYPE
SYNTAX OAMStatsPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics about OAM Port"
INDEX { oamStatsPortIndex }
::= { oamStatsPortTable 1 }
OAMStatsPortEntry ::= SEQUENCE {
oamStatsPortIndex PortNumber,
oamStatsPortInfoTx INTEGER,
oamStatsPortInfoRx INTEGER,
oamStatsPortUnsupTx INTEGER,
oamStatsPortUnsupRx INTEGER,
oamStatsPortLocalLinkFaults INTEGER,
oamStatsPortLocalCriticalEvents INTEGER,
oamStatsPortLocalDyingGasps INTEGER,
oamStatsPortRemoteLinkFaults INTEGER,
oamStatsPortRemoteCriticalEvents INTEGER,
oamStatsPortRemoteDyingGasps INTEGER
}
oamStatsPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OAM Port number for which the table is related."
::= { oamStatsPortEntry 1}
oamStatsPortInfoTx OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted OAM information packets"
::= { oamStatsPortEntry 2}
oamStatsPortInfoRx OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received OAM information packets"
::= { oamStatsPortEntry 3}
oamStatsPortUnsupTx OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted OAM unsupported packets"
::= { oamStatsPortEntry 4}
oamStatsPortUnsupRx OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received OAM unsupported packets"
::= { oamStatsPortEntry 5}
oamStatsPortLocalLinkFaults OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of local OAM link fault packets"
::= { oamStatsPortEntry 6}
oamStatsPortLocalCriticalEvents OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of local OAM critical event packets"
::= { oamStatsPortEntry 7}
oamStatsPortLocalDyingGasps OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of local OAM dying gasp packets"
::= { oamStatsPortEntry 8}
oamStatsPortRemoteLinkFaults OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of remote OAM link fault packets"
::= { oamStatsPortEntry 9}
oamStatsPortRemoteCriticalEvents OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of remote OAM critical event packets"
::= { oamStatsPortEntry 10}
oamStatsPortRemoteDyingGasps OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of remote OAM dying gasp packets"
::= { oamStatsPortEntry 11}
-- Trunk Group Information
trunkGroupInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of trunk group information."
::= { trunkGroupInfo 1 }
trunkGroupInfoTableEntry OBJECT-TYPE
SYNTAX TrunkGroupInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in trunk group information table."
INDEX { trunkGroupInfoIndex }
::= { trunkGroupInfoTable 1 }
TrunkGroupInfoTableEntry ::= SEQUENCE {
trunkGroupInfoIndex Integer32,
trunkGroupInfoState INTEGER,
trunkGroupInfoProtocol INTEGER,
trunkGroupInfoPorts OCTET STRING
}
trunkGroupInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { trunkGroupInfoTableEntry 1 }
trunkGroupInfoState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk group state."
::= { trunkGroupInfoTableEntry 2 }
trunkGroupInfoPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group"
::= { trunkGroupInfoTableEntry 3 }
trunkGroupInfoProtocol OBJECT-TYPE
SYNTAX INTEGER {
static(1),
lacp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk group protocol
Static - static trunk group
Lacp - dynamic trunk group"
::= { trunkGroupInfoTableEntry 4 }
trunkGroupInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Trunk Group Info."
::= {trunkGroupInfo 2 }
trunkGroupInfoPortTableEntry OBJECT-TYPE
SYNTAX TrunkGroupInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Trunk Info table."
INDEX { trunkGroupInfoPortTrunkId, trunkGroupInfoPortPortId }
::= { trunkGroupInfoPortTable 1 }
TrunkGroupInfoPortTableEntry ::= SEQUENCE {
trunkGroupInfoPortTrunkId Integer32,
trunkGroupInfoPortPortId PortNumber,
trunkGroupInfoPortStatus INTEGER
}
trunkGroupInfoPortTrunkId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trunk identifier."
::= { trunkGroupInfoPortTableEntry 1 }
trunkGroupInfoPortPortId OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier."
::= { trunkGroupInfoPortTableEntry 2 }
trunkGroupInfoPortStatus OBJECT-TYPE
SYNTAX INTEGER{
down(0),
blocking(1),
forwarding(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Status."
::= { trunkGroupInfoPortTableEntry 3 }
-- LACP Statistics
lacpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP Stats."
::= {lacpStats 1}
lacpStatsTableEntry OBJECT-TYPE
SYNTAX LacpStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Lacp status info."
INDEX { lacpStatsIndex }
::= { lacpStatsTable 1 }
LacpStatsTableEntry ::= SEQUENCE {
lacpStatsIndex PortNumber,
lacpdusRx Integer32,
markerpdusRx Integer32,
markerresponsepdusRx Integer32,
unknownRx Integer32,
illegalRx Integer32,
lacpdusTx Integer32,
markerpdusTx Integer32,
markerresponsepdusTx Integer32
,lacpClearStats INTEGER
}
lacpStatsIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index"
::= {lacpStatsTableEntry 1}
lacpdusRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid LACPDUs received"
::= {lacpStatsTableEntry 2}
markerpdusRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid Marker PDUs received"
::= {lacpStatsTableEntry 3}
markerresponsepdusRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid Marker Rsp PDUs received"
::= {lacpStatsTableEntry 4}
unknownRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unknown version/TLV type"
::= {lacpStatsTableEntry 5}
illegalRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Illegal subtype received"
::= {lacpStatsTableEntry 6}
lacpdusTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACPDUs transmitted"
::= {lacpStatsTableEntry 7}
markerpdusTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Market PDUs transmitted"
::= {lacpStatsTableEntry 8}
markerresponsepdusTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Marker Rsp PDUs transmitted "
::= {lacpStatsTableEntry 9}
lacpClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the LACP statistics."
::= { lacpStatsTableEntry 10 }
-- FDB Statistics
fdbStatsCurrent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of entries in the Forwarding Database."
::= { fdbStats 3 }
fdbStatsHiwat OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Highest number of entries recorded at any given time in the
Forwarding Database."
::= { fdbStats 4 }
fdbStatsClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear FDB statistics"
::= { fdbStats 11 }
-- STP Statistics
stgStatsPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgStatsPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port statistics."
::= { stpStats 1 }
stgStatsPortTableEntry OBJECT-TYPE
SYNTAX StgStatsPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics about port of a particular Spanning Tree Group."
INDEX { stgStatsStpIndex, stgStatsPortIndex }
::= { stgStatsPortTable 1 }
StgStatsPortTableEntry ::= SEQUENCE {
stgStatsStpIndex Integer32,
stgStatsPortIndex PortNumber,
stgStatsPortRcvCfgBpdus Counter32,
stgStatsPortRcvTcnBpdus Counter32,
stgStatsPortXmtCfgBpdus Counter32,
stgStatsPortXmtTcnBpdus Counter32
}
stgStatsStpIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group."
::= { stgStatsPortTableEntry 1 }
stgStatsPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group."
::= { stgStatsPortTableEntry 2 }
stgStatsPortRcvCfgBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Configuration BPDU's received on this port."
::= { stgStatsPortTableEntry 3 }
stgStatsPortRcvTcnBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDU's received on this port."
::= { stgStatsPortTableEntry 4 }
stgStatsPortXmtCfgBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Configuration BPDU's trasmitted from the port."
::= { stgStatsPortTableEntry 5 }
stgStatsPortXmtTcnBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDU's trasmitted from the port."
::= { stgStatsPortTableEntry 6 }
fdbClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the entire master FDB."
::= { fdbInfo 1 }
-- FDB table
fdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FDB entries."
::= { fdbInfo 2 }
fdbEntry OBJECT-TYPE
SYNTAX FdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the FDB table"
INDEX { fdbMacAddr }
::= { fdbTable 1 }
FdbEntry ::= SEQUENCE {
fdbMacAddr MacAddress,
fdbVlan Integer32,
fdbSrcPort PortNumber,
fdbSrcTrunk Integer32,
fdbState INTEGER
,fdbStatus Integer32
}
fdbMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address for the FDB entry."
::= { fdbEntry 1 }
fdbVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID for the FDB entry."
::= { fdbEntry 2 }
fdbSrcPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been learned but that the bridge does have some
forwarding/filtering information about this address."
::= { fdbEntry 3 }
fdbState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
forward(2),
trunk(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address has been learned by the switch
trunk(3) : frames with this MAC address are forwarded to trunk
group"
::= { fdbEntry 4 }
fdbSrcTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not associated with a trunk."
::= { fdbEntry 7 }
fdbStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"'1' if it is permanent
'0' if it is not permanent"
::= { fdbEntry 8 }
-- Multicast FDB table
mcastFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF McastFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static multicast FDB entries."
::= { fdbInfo 3 }
mcastFdbEntry OBJECT-TYPE
SYNTAX McastFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static multicast FDB table"
INDEX { mcastFdbEntryIndex }
::= { mcastFdbTable 1 }
McastFdbEntry ::= SEQUENCE {
mcastFdbEntryIndex Integer32,
mcastFdbMacAddr MacAddress,
mcastFdbVlan Integer32,
mcastFdbSrcPorts PortNumber
}
mcastFdbEntryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The static multicast fdb entry index"
::= { mcastFdbEntry 1 }
mcastFdbMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The static multicast MAC address for the FDB entry."
::= { mcastFdbEntry 2 }
mcastFdbVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID for the FDB entry."
::= { mcastFdbEntry 3 }
mcastFdbSrcPorts OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast MAC address port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the multicast MAC address.
0 - The represented port does not belong to the multicast MAC address."
::= { mcastFdbEntry 4 }
-- STP Information
stpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group information."
::= { stpInfo 1 }
stpInfoTableEntry OBJECT-TYPE
SYNTAX StpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Spanning Tree Group."
INDEX { stpInfoIndex }
::= { stpInfoTable 1 }
StpInfoTableEntry ::= SEQUENCE {
stpInfoIndex Integer32,
stpInfoTimeSinceTopChange TimeTicks,
stpInfoTopChanges Counter32,
stpInfoDesignatedRoot BridgeId,
stpInfoRootCost Integer32,
stpInfoRootPort PortNumber,
stpInfoMaxAge Integer32,
stpInfoHelloTime Integer32,
stpInfoForwardDelay Integer32,
stpInfoHoldTime Integer32
}
stpInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stpInfoTableEntry 1 }
stpInfoTimeSinceTopChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the last time a topology
change was detected by the bridge entity."
::= { stpInfoTableEntry 2 }
stpInfoTopChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of topology changes detected by this bridge since
the management entity was last reset or initialized."
::= { stpInfoTableEntry 3 }
stpInfoDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the root of the spanning tree as determined
by the Spanning Tree Protocol as executed by this node. This value
is used as the Root Identifier parameter in all Configuration Bridge
PDUs originated by this node."
::= { stpInfoTableEntry 4 }
stpInfoRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the path to the root as seen from this bridge."
::= { stpInfoTableEntry 5 }
stpInfoRootPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port which offers the lowest cost path from
this bridge to the root bridge."
::= { stpInfoTableEntry 6 }
stpInfoMaxAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum age of Spanning Tree Protocol information learned from
the network on any port before it is discarded, in units of
hundredths of a second. This is the actual value that this bridge is
currently using."
::= { stpInfoTableEntry 7 }
stpInfoHelloTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration bridge
PDUs by this node on any port when it is the root of the spanning
tree or trying to become so, in units of hundredths of a second.
This is the actual value that this bridge is currently using."
::= { stpInfoTableEntry 8 }
stpInfoForwardDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of hundredths of a second,
controls how fast a port changes its spanning state when moving
towards the Forwarding state. The value determines how long the port
stays in each of the Listening and Learning states, which precede
the Forwarding state. This value is also used, when a topology
change has been detected and is underway, to age all dynamic entries
in the Forwarding Database."
::= { stpInfoTableEntry 9 }
stpInfoHoldTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value determines the interval length during which no more
than two Configuration bridge PDUs shall be transmitted by this node,
in units of hundredths of a second."
::= { stpInfoTableEntry 10 }
stpInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port information."
::= { stpInfo 2 }
stpInfoPortTableEntry OBJECT-TYPE
SYNTAX StpInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about port configuration for a particular Spanning Tree
Group."
INDEX { stpInfoPortStpIndex, stpInfoPortIndex }
::= { stpInfoPortTable 1 }
StpInfoPortTableEntry ::= SEQUENCE {
stpInfoPortStpIndex Integer32,
stpInfoPortIndex PortNumber,
stpInfoPortState INTEGER,
stpInfoPortDesignatedRoot BridgeId,
stpInfoPortDesignatedCost Integer32,
stpInfoPortDesignatedBridge BridgeId,
stpInfoPortDesignatedPort OCTET STRING,
stpInfoPortForwardTransitions Counter32,
stpInfoPortRole INTEGER,
stpInfoPortLinkType INTEGER,
stpInfoPortEdge INTEGER,
stpInfoPortExtGuard INTEGER,
stpInfoPortPathCost Integer32,
stpInfoPortPriority Integer32
}
stpInfoPortStpIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group."
::= { stpInfoPortTableEntry 1 }
stpInfoPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group."
::= { stpInfoPortTableEntry 2 }
stpInfoPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
discarding(7),
broken(6),
na(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's current state as defined by application of the Spanning
Tree Protocol. This state controls what action a port takes on
reception of a frame. If the bridge has detected a port that is
malfunctioning it will place that port into the broken(6) state.
For ports which are disabled, this object will have a value of
disabled(1). If port is not controlled by STP, this object will have
a value of na (8)."
::= { stpInfoPortTableEntry 3 }
stpInfoPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the Bridge recorded as the Root in
the Configuration BPDUs transmitted by the Designated Bridge for the
segment to which the port is attached."
::= { stpInfoPortTableEntry 4 }
stpInfoPortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the segment connected to this
port. This value is compared to the Root Path Cost field in received
bridge PDUs."
::= { stpInfoPortTableEntry 5 }
stpInfoPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge Identifier of the bridge which this port considers to be
the Designated Bridge for this port's segment."
::= { stpInfoPortTableEntry 6 }
stpInfoPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Identifier of the port on the Designated Bridge for this
port's segment."
::= { stpInfoPortTableEntry 7 }
stpInfoPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this port has transitioned from the Learning
state to the Forwarding state."
::= { stpInfoPortTableEntry 8 }
stpInfoPortPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the port."
::= { stpInfoPortTableEntry 9 }
stpInfoPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
alternate(2),
backup(3),
root(4),
designated(5),
master(6),
unknown(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port role. Returns unknown(7) when MSTP/RSTP is not enabled,
otherwise returns appropriate port role."
::= { stpInfoPortTableEntry 10 }
stpInfoPortLinkType OBJECT-TYPE
SYNTAX INTEGER {
p2p(1),
shared(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The point-to-point status of the LAN segment attached
to this port. A value of p2p (1) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(2) indicates that this port is being treated as
having a shared media connection."
::= { stpInfoPortTableEntry 11 }
stpInfoPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port is an edge port or not. Returns disabled(2) when the port is
not an edge port and returns enabled(1) when it is an edge port."
::= { stpInfoPortTableEntry 12 }
stpInfoPortExtGuard OBJECT-TYPE
SYNTAX INTEGER {
loop-inc(1),
root-inc(2),
normal(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current STP guard state. Not include BPDU Guard."
::= { stpInfoPortTableEntry 13 }
stpInfoPortPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value."
::= { stpInfoPortTableEntry 14 }
-- LACP information
lacpInfoAggrTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpInfoAggrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP aggregator information."
::= { lacpInfo 1 }
lacpInfoAggrTableEntry OBJECT-TYPE
SYNTAX LacpInfoAggrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a LACP aggregator."
INDEX { lacpInfoAggrIndex }
::= { lacpInfoAggrTable 1 }
LacpInfoAggrTableEntry ::= SEQUENCE {
lacpInfoAggrIndex PortNumber,
lacpInfoAggrId Integer32,
lacpInfoAggrMac DisplayString,
lacpInfoAggrActSysPrio Integer32,
lacpInfoAggrActSysId DisplayString,
lacpInfoAggrIndivState INTEGER,
lacpInfoAggrActAdminKey Integer32,
lacpInfoAggrActOperKey Integer32,
lacpInfoAggrPartSysPrio Integer32,
lacpInfoAggrPartSysId DisplayString,
lacpInfoAggrPartOperKey Integer32,
lacpInfoAggrReadyState INTEGER,
lacpInfoAggrNumPorts Integer32
,lacpInfoAggrMinLinks Integer32
}
lacpInfoAggrIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aggregator identifier."
::= { lacpInfoAggrTableEntry 1 }
lacpInfoAggrId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator ID"
::= { lacpInfoAggrTableEntry 2 }
lacpInfoAggrMac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator MAC address"
::= { lacpInfoAggrTableEntry 3 }
lacpInfoAggrActSysPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator actor system priority"
::= { lacpInfoAggrTableEntry 4 }
lacpInfoAggrActSysId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator actor system ID"
::= { lacpInfoAggrTableEntry 5 }
lacpInfoAggrIndivState OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator individual state"
::= { lacpInfoAggrTableEntry 6 }
lacpInfoAggrActAdminKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator actor admin key"
::= { lacpInfoAggrTableEntry 7 }
lacpInfoAggrActOperKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator actor oper key"
::= { lacpInfoAggrTableEntry 8 }
lacpInfoAggrPartSysPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator partner system priority"
::= { lacpInfoAggrTableEntry 9 }
lacpInfoAggrPartSysId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator partner system ID"
::= { lacpInfoAggrTableEntry 10 }
lacpInfoAggrPartOperKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator partner oper key"
::= { lacpInfoAggrTableEntry 11 }
lacpInfoAggrReadyState OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator ready state"
::= { lacpInfoAggrTableEntry 12 }
lacpInfoAggrNumPorts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ports in aggregator"
::= { lacpInfoAggrTableEntry 13 }
lacpInfoAggrMinLinks OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Links of ports in aggregator"
::= { lacpInfoAggrTableEntry 15 }
lacpInfoPort OBJECT IDENTIFIER ::= { lacpInfo 2 }
lacpInfoPortGeneralTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpInfoPortGeneralTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port general information."
::= { lacpInfoPort 1 }
lacpInfoPortGeneralTableEntry OBJECT-TYPE
SYNTAX LacpInfoPortGeneralTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"General information about a LACP port."
INDEX { lacpInfoPortGeneralIndex }
::= { lacpInfoPortGeneralTable 1 }
LacpInfoPortGeneralTableEntry ::= SEQUENCE {
lacpInfoPortGeneralIndex PortNumber,
lacpInfoPortLacpEna INTEGER,
lacpInfoPortAdminEna INTEGER,
lacpInfoPortActSysId DisplayString,
lacpInfoPortActSysPrio Integer32,
lacpInfoPortActAdminKey Integer32,
lacpInfoPortActOperKey Integer32,
lacpInfoPortActPortNum Integer32,
lacpInfoPortActPortPrio Integer32,
lacpInfoPortIndivState INTEGER,
lacpInfoSelAggrId Integer32,
lacpInfoAttAggrId Integer32,
lacpInfoPortReadyN INTEGER,
lacpInfoPortNtt INTEGER,
lacpInfoPortSelected INTEGER,
lacpInfoPortMoved INTEGER,
lacpInfoCollDetState INTEGER,
lacpInfoPortRxState DisplayString,
lacpInfoPortMuxState DisplayString,
lacpInfoPortPerState DisplayString,
lacpInfoPortPerTraTimer Integer32,
lacpInfoPortCurWhileTimer Integer32,
lacpInfoPortOperState INTEGER
}
lacpInfoPortGeneralIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier."
::= { lacpInfoPortGeneralTableEntry 1 }
lacpInfoPortLacpEna OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP enabled on port"
::= { lacpInfoPortGeneralTableEntry 2 }
lacpInfoPortAdminEna OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port admin enabled"
::= { lacpInfoPortGeneralTableEntry 3 }
lacpInfoPortActSysId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port actor system ID"
::= { lacpInfoPortGeneralTableEntry 4 }
lacpInfoPortActSysPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port actor system priority"
::= { lacpInfoPortGeneralTableEntry 5 }
lacpInfoPortActAdminKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port actor admin key"
::= { lacpInfoPortGeneralTableEntry 6 }
lacpInfoPortActOperKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port actor oper key"
::= { lacpInfoPortGeneralTableEntry 7 }
lacpInfoPortActPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port number"
::= { lacpInfoPortGeneralTableEntry 8 }
lacpInfoPortActPortPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port priority"
::= { lacpInfoPortGeneralTableEntry 9 }
lacpInfoPortIndivState OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port individual state"
::= { lacpInfoPortGeneralTableEntry 10 }
lacpInfoSelAggrId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port selected aggregator ID"
::= { lacpInfoPortGeneralTableEntry 11 }
lacpInfoAttAggrId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port attached aggregator ID"
::= { lacpInfoPortGeneralTableEntry 12 }
lacpInfoPortReadyN OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True value for Ready_N flag indicates that the wait while timer
has expired and it is waiting to attach to an aggregator.
There is one Ready_N value for each port."
::= { lacpInfoPortGeneralTableEntry 13 }
lacpInfoPortNtt OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Need to transmit flag. True indicates that there is new protocol
information that should be transmitted on the link."
::= { lacpInfoPortGeneralTableEntry 14 }
lacpInfoPortSelected OBJECT-TYPE
SYNTAX INTEGER {
selected(1),
unselected(2),
standby(3)
, suspended(4)
, individual(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected flag value indicates that the selection logic has selected
an appropriate Aggregator. A value of unselected indicates that no
aggregator is currently selected. A value of standby indicates that
although the selection logic has selected an appropriate Aggregator,
aggregation restrictions currently prevent the port from being
enabled as part of the aggregation, and so the port is being held
in standby condition.
A value of suspended indicates that the port in a LACP port-channel
cannot be aggregated due to, for example, incompatible LACP system/port
attributes of the remote endpoints.
A value of suspended indicates that the port in a LACP port-channel
cannot be aggregated due to, for example, not receiveing LACPDU.
A value of individual indicates that the port works as a normal link-up
port due to not receiving LACPDU.
"
::= { lacpInfoPortGeneralTableEntry 15 }
lacpInfoPortMoved OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Moved flag is set to true if the receive machine for a port
is in the port_disabled state, and the combination of partner oper
system and partner oper port number in use by the port has been
used by received in an incoming LACPDU on a different port."
::= { lacpInfoPortGeneralTableEntry 16 }
lacpInfoCollDetState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port collision and detection state"
::= { lacpInfoPortGeneralTableEntry 17 }
lacpInfoPortRxState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port RX machine state"
::= { lacpInfoPortGeneralTableEntry 18 }
lacpInfoPortMuxState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port Mux machine state"
::= { lacpInfoPortGeneralTableEntry 19 }
lacpInfoPortPerState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port periodic machine state"
::= { lacpInfoPortGeneralTableEntry 20 }
lacpInfoPortPerTraTimer OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Periodic Transmit Timer"
::= { lacpInfoPortGeneralTableEntry 21 }
lacpInfoPortCurWhileTimer OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current While Timer"
::= { lacpInfoPortGeneralTableEntry 22 }
lacpInfoPortOperState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
up(2),
down(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of LACP on the port."
::= { lacpInfoPortGeneralTableEntry 23 }
lacpInfoPortAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpInfoPortAdminTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port admin information."
::= { lacpInfoPort 2 }
lacpInfoPortAdminTableEntry OBJECT-TYPE
SYNTAX LacpInfoPortAdminTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Admin information about a LACP port."
INDEX { lacpInfoPortAdminIndex }
::= { lacpInfoPortAdminTable 1 }
LacpInfoPortAdminTableEntry ::= SEQUENCE {
lacpInfoPortAdminIndex PortNumber,
lacpInfoPortActAdPortState DisplayString,
lacpInfoPortActAdActiv INTEGER,
lacpInfoPortActAdSync INTEGER,
lacpInfoPortActAdDef INTEGER,
lacpInfoPortActAdTimeout INTEGER,
lacpInfoPortActAdColl INTEGER,
lacpInfoPortActAdExp INTEGER,
lacpInfoPortActAdAggr INTEGER,
lacpInfoPortActAdDist INTEGER
}
lacpInfoPortAdminIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier."
::= { lacpInfoPortAdminTableEntry 1 }
lacpInfoPortActAdPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is showed as 0x0, else it is
displayed a blank state which mean is not a NULL state"
::= { lacpInfoPortAdminTableEntry 7 }
lacpInfoPortActAdActiv OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port Activity"
::= { lacpInfoPortAdminTableEntry 8 }
lacpInfoPortActAdSync OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port Synchronization"
::= { lacpInfoPortAdminTableEntry 9 }
lacpInfoPortActAdDef OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port Defaulted"
::= { lacpInfoPortAdminTableEntry 10 }
lacpInfoPortActAdTimeout OBJECT-TYPE
SYNTAX INTEGER {
short(1),
long(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port Timeout"
::= { lacpInfoPortAdminTableEntry 11 }
lacpInfoPortActAdColl OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port Collecting"
::= { lacpInfoPortAdminTableEntry 12 }
lacpInfoPortActAdExp OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port Expired"
::= { lacpInfoPortAdminTableEntry 13 }
lacpInfoPortActAdAggr OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port Aggregation"
::= { lacpInfoPortAdminTableEntry 14 }
lacpInfoPortActAdDist OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port Distributing"
::= { lacpInfoPortAdminTableEntry 15 }
lacpInfoPortOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpInfoPortOperTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port oper information."
::= { lacpInfoPort 3 }
lacpInfoPortOperTableEntry OBJECT-TYPE
SYNTAX LacpInfoPortOperTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Oper information about a LACP port."
INDEX { lacpInfoPortOperIndex }
::= { lacpInfoPortOperTable 1 }
LacpInfoPortOperTableEntry ::= SEQUENCE {
lacpInfoPortOperIndex PortNumber,
lacpInfoPortPartOpSysPrio Integer32,
lacpInfoPortPartOpSysId DisplayString,
lacpInfoPortPartOpKey Integer32,
lacpInfoPortPartOpPortNum Integer32,
lacpInfoPortPartOpPortPrio Integer32,
lacpInfoPortActOpPortState DisplayString,
lacpInfoPortActOpActiv INTEGER,
lacpInfoPortActOpSync INTEGER,
lacpInfoPortActOpDef INTEGER,
lacpInfoPortActOpTimeout INTEGER,
lacpInfoPortActOpColl INTEGER,
lacpInfoPortActOpExp INTEGER,
lacpInfoPortActOpAggr INTEGER,
lacpInfoPortActOpDist INTEGER,
lacpInfoPortPartOpPortState DisplayString,
lacpInfoPortPartOpActiv INTEGER,
lacpInfoPortPartOpSync INTEGER,
lacpInfoPortPartOpDef INTEGER,
lacpInfoPortPartOpTimeout INTEGER,
lacpInfoPortPartOpColl INTEGER,
lacpInfoPortPartOpExp INTEGER,
lacpInfoPortPartOpAggr INTEGER,
lacpInfoPortPartOpDist INTEGER
}
lacpInfoPortOperIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier."
::= { lacpInfoPortOperTableEntry 1 }
lacpInfoPortPartOpSysPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of Partner Operator Port System Priority"
::= { lacpInfoPortOperTableEntry 2 }
lacpInfoPortPartOpSysId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of Partner Operator Port System ID"
::= { lacpInfoPortOperTableEntry 3 }
lacpInfoPortPartOpKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of Partner Operator Port Key"
::= { lacpInfoPortOperTableEntry 4 }
lacpInfoPortPartOpPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Partner Operator Port Number"
::= { lacpInfoPortOperTableEntry 5 }
lacpInfoPortPartOpPortPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of Partner Operator Port Priority"
::= { lacpInfoPortOperTableEntry 6 }
lacpInfoPortActOpPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is showed as 0x0, else it is
displayed a blank state which mean is not a NULL state"
::= { lacpInfoPortOperTableEntry 7 }
lacpInfoPortActOpActiv OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port Activity"
::= { lacpInfoPortOperTableEntry 8 }
lacpInfoPortActOpSync OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port Synchronization"
::= { lacpInfoPortOperTableEntry 9 }
lacpInfoPortActOpDef OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port Defaulted"
::= { lacpInfoPortOperTableEntry 10 }
lacpInfoPortActOpTimeout OBJECT-TYPE
SYNTAX INTEGER {
short(1),
long(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port Timeout"
::= { lacpInfoPortOperTableEntry 11 }
lacpInfoPortActOpColl OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port Collecting"
::= { lacpInfoPortOperTableEntry 12 }
lacpInfoPortActOpExp OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port Expired"
::= { lacpInfoPortOperTableEntry 13 }
lacpInfoPortActOpAggr OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port Aggregation"
::= { lacpInfoPortOperTableEntry 14 }
lacpInfoPortActOpDist OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port Distributing"
::= { lacpInfoPortOperTableEntry 15 }
lacpInfoPortPartOpPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is showed as 0x0, else it is
displayed a blank state which mean is not a NULL state"
::= { lacpInfoPortOperTableEntry 16 }
lacpInfoPortPartOpActiv OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port Activity"
::= { lacpInfoPortOperTableEntry 17 }
lacpInfoPortPartOpSync OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port Synchronization"
::= { lacpInfoPortOperTableEntry 18 }
lacpInfoPortPartOpDef OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port Defaulted"
::= { lacpInfoPortOperTableEntry 19 }
lacpInfoPortPartOpTimeout OBJECT-TYPE
SYNTAX INTEGER {
short(1),
long(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port Timeout"
::= { lacpInfoPortOperTableEntry 20 }
lacpInfoPortPartOpColl OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port Collecting"
::= { lacpInfoPortOperTableEntry 21 }
lacpInfoPortPartOpExp OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port Expired"
::= { lacpInfoPortOperTableEntry 22 }
lacpInfoPortPartOpAggr OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port Aggregation"
::= { lacpInfoPortOperTableEntry 23 }
lacpInfoPortPartOpDist OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port Distributing"
::= { lacpInfoPortOperTableEntry 24 }
-- CIST Information
cistRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the common spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the CIST Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { cistGeneralInfo 1 }
cistRootPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the path to the CIST Root as seen from this bridge."
::= { cistGeneralInfo 2 }
cistRootPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Number of the Port which offers the lowest path cost from
this bridge to the CIST Root Bridge."
::= { cistGeneralInfo 3 }
cistBridgeHelloTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration bridge
PDUs in seconds."
::= { cistGeneralInfo 4 }
cistBridgeMaxAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { cistGeneralInfo 5 }
cistBridgeForwardDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { cistGeneralInfo 6 }
cistRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the Multiple
spanning tree region as determined by the Spanning Tree
Protocol as executed by this node. This value is used as
the CIST Regional Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { cistGeneralInfo 7 }
cistRegionalPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the CIST Regional Root as seen from this
bridge."
::= { cistGeneralInfo 8 }
mstpDigest OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The digest of the mstp."
::= { cistGeneralInfo 9 }
-- CIST Port Information Table
cistInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CistInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CIST Port information."
::= { cistInfo 2 }
cistInfoPortTableEntry OBJECT-TYPE
SYNTAX CistInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CIST Port."
INDEX { cistInfoPortIndex }
::= { cistInfoPortTable 1 }
CistInfoPortTableEntry ::= SEQUENCE {
cistInfoPortIndex PortNumber,
cistInfoPortPriority Integer32,
cistInfoPortPathCost Integer32,
cistInfoPortState INTEGER,
cistInfoPortRole INTEGER,
cistInfoPortDesignatedBridge BridgeId,
cistInfoPortDesignatedPort OCTET STRING,
cistInfoPortLinkType INTEGER,
cistInfoPortHelloTime Integer32,
cistInfoPortEdge INTEGER
}
cistInfoPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry contains spanning
tree configuration."
::= { cistInfoPortTableEntry 1 }
cistInfoPortPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value."
::= { cistInfoPortTableEntry 2 }
cistInfoPortPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards
the CIST Root which include this port."
::= { cistInfoPortTableEntry 3 }
cistInfoPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
discarding (2),
learning (4),
forwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port as defined by the Common
spanning tree protocol."
::= { cistInfoPortTableEntry 4 }
cistInfoPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
alternate(2),
backup(3),
root(4),
designated(5),
master(6),
unknown(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected Port Role of the port for this spanning tree instance."
::= { cistInfoPortTableEntry 5 }
cistInfoPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { cistInfoPortTableEntry 6 }
cistInfoPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier of the port on the Designated Bridge
for this port's segment."
::= { cistInfoPortTableEntry 7 }
cistInfoPortLinkType OBJECT-TYPE
SYNTAX INTEGER {
p2p(1),
shared(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The point-to-point status of the LAN segment attached
to this port. A value of p2p (1) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(2) indicates that this port is being treated as
having a shared media connection."
::= { cistInfoPortTableEntry 8 }
cistInfoPortHelloTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CIST port Hello Time"
::= { cistInfoPortTableEntry 9 }
cistInfoPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port is an edge port or not. Returns disabled(2) when the port is
not an edge port and returns enabled(1) when it is an edge port."
::= { cistInfoPortTableEntry 10 }
-- General Information
-- VLAN information
vlanInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN information."
::= { vlanInfo 1 }
vlanInfoTableEntry OBJECT-TYPE
SYNTAX VlanInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular VLAN."
INDEX { vlanInfoId }
::= { vlanInfoTable 1 }
VlanInfoTableEntry ::= SEQUENCE {
vlanInfoId INTEGER,
vlanInfoName DisplayString,
vlanInfoStatus INTEGER,
vlanInfoPorts OCTET STRING
}
vlanInfoId OBJECT-TYPE
SYNTAX INTEGER (1..4090)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vlanInfoTableEntry 1 }
vlanInfoName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN name."
::= { vlanInfoTableEntry 2 }
vlanInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable, VLAN state information"
::= { vlanInfoTableEntry 3 }
vlanInfoPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN"
::= { vlanInfoTableEntry 7 }
-- L2 Operational commands
-- ----------------------------------------------------------------------------
-- --
-- Virtual Link Aggregation (VLAG) --
-- --
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- Global VLAG Configuration
-- ----------------------------------------------------------------------------
vlagCurIslCfgPortChannel OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current vLAG ISL portchannel"
DEFVAL { 0 }
::= { vlagIslCfg 1 }
vlagNewIslCfgPortChannel OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to change the vLAG ISL portchannel."
DEFVAL { 0 }
::= { vlagIslCfg 2 }
vlagCurIslCfgAdminKey OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current vLAG ISL admin key."
DEFVAL { 0 }
::= { vlagIslCfg 3 }
vlagNewIslCfgAdminKey OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to change the vLAG ISL admin key."
DEFVAL { 0 }
::= { vlagIslCfg 4 }
vlagCurCfgSwitchPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current vLAG switch priority"
DEFVAL { 0 }
::= { vlagCfg 4 }
vlagNewCfgSwitchPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to change the vLAG priority of this switch."
DEFVAL { 0 }
::= { vlagCfg 5 }
-- Static Trunk table
vlagCurCfgTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlagCurCfgTrunkTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects of the vLAG groups configured in this
switch."
::= { vlagCfg 6 }
vlagCurCfgTrunkTableEntry OBJECT-TYPE
SYNTAX VlagCurCfgTrunkTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration objects for an vLAG group."
INDEX { vlagCurCfgTrunkIndex }
::= { vlagCurCfgTrunkTable 1 }
VlagCurCfgTrunkTableEntry ::= SEQUENCE {
vlagCurCfgTrunkIndex Integer32,
vlagCurCfgTrunkState INTEGER
}
vlagCurCfgTrunkIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { vlagCurCfgTrunkTableEntry 1 }
vlagCurCfgTrunkState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current administrative state of the vLAG group."
DEFVAL { disabled }
::= { vlagCurCfgTrunkTableEntry 2 }
vlagNewCfgTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlagNewCfgTrunkTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects of the vLAG groups configured in this
switch."
::= { vlagCfg 7 }
vlagNewCfgTrunkTableEntry OBJECT-TYPE
SYNTAX VlagNewCfgTrunkTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration objects for an vLAG group."
INDEX { vlagNewCfgTrunkIndex }
::= { vlagNewCfgTrunkTable 1 }
VlagNewCfgTrunkTableEntry ::= SEQUENCE {
vlagNewCfgTrunkIndex Integer32,
vlagNewCfgTrunkState INTEGER
}
vlagNewCfgTrunkIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { vlagNewCfgTrunkTableEntry 1 }
vlagNewCfgTrunkState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new administrative state of the vLAG group."
DEFVAL { disabled }
::= { vlagNewCfgTrunkTableEntry 2 }
-- Dynamic Trunk table
vlagCurCfgLacpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlagCurCfgLacpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects of the vLAG groups configured in this
switch."
::= { vlagCfg 8 }
vlagCurCfgLacpTableEntry OBJECT-TYPE
SYNTAX VlagCurCfgLacpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration objects for an vLAG group."
INDEX { vlagCurCfgLacpKey }
::= { vlagCurCfgLacpTable 1 }
VlagCurCfgLacpTableEntry ::= SEQUENCE {
vlagCurCfgLacpKey INTEGER,
vlagCurCfgLacpState INTEGER
}
vlagCurCfgLacpKey OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { vlagCurCfgLacpTableEntry 1 }
vlagCurCfgLacpState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current administrative state of the vLAG group."
DEFVAL { disabled }
::= { vlagCurCfgLacpTableEntry 2 }
vlagNewCfgLacpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlagNewCfgLacpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects of the vLAG groups configured in this
switch."
::= { vlagCfg 9 }
vlagNewCfgLacpTableEntry OBJECT-TYPE
SYNTAX VlagNewCfgLacpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration objects for an vLAG group."
INDEX { vlagNewCfgLacpKey }
::= { vlagNewCfgLacpTable 1 }
VlagNewCfgLacpTableEntry ::= SEQUENCE {
vlagNewCfgLacpKey INTEGER,
vlagNewCfgLacpState INTEGER
}
vlagNewCfgLacpKey OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { vlagNewCfgLacpTableEntry 1 }
vlagNewCfgLacpState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new administrative state of the vLAG group."
DEFVAL { disabled }
::= { vlagNewCfgLacpTableEntry 2 }
vlagCurCfgHlthchkPeerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Health check Peer ip address."
DEFVAL { '00000000'h } -- 0.0.0.0
::= { vlagCfg 10 }
vlagNewCfgHlthchkPeerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The New Health check Peer ip address."
DEFVAL { '00000000'h } -- 0.0.0.0
::= { vlagCfg 11 }
vlagCurCfgTierId OBJECT-TYPE
SYNTAX INTEGER (0..512)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current vLAG Tier ID"
DEFVAL { 0 }
::= { vlagCfg 12 }
vlagNewCfgTierId OBJECT-TYPE
SYNTAX INTEGER (0..512)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to change the vLAG Tier ID of this switch.
vLAG consist of 2 vLAG peer switches connected by ISL link, the
system formed by the switches is referred to as a vLAG tier.
This object is used to specify the vLAG tier. And the tier id
is used to generate vLAG system MAC."
DEFVAL { 0 }
::= { vlagCfg 13 }
vlagCurCfgStartupDelayInterval OBJECT-TYPE
SYNTAX INTEGER (0..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current vLAG Startup delay interval"
DEFVAL { 120 }
::= { vlagCfg 14 }
vlagNewCfgStartupDelayInterval OBJECT-TYPE
SYNTAX INTEGER (0..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to change the vLAG startup Delay Timer
interval. The Timer is used to prevent traffic lost for the
vLAG ports may be up before the ISL is up. The Timer is st-
arted when the ISL is up and the role has been elected. And
when the timer expires, all vLAG ports will be up. Before
and during the timer running, all vLAG ports should be err-
disabled."
DEFVAL { 120 }
::= { vlagCfg 15 }
vlagCurCfgGlobalEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current vLAG global status on switch."
DEFVAL { disabled }
::= { vlagCfg 16 }
vlagNewCfgGlobalEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set true to enable vLAG globally or
Set false to disable vLAG globally on switch."
DEFVAL { disabled }
::= { vlagCfg 17 }
vlagCurCfgHlthchkConnectRetryInterval OBJECT-TYPE
SYNTAX INTEGER (1..300)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In case of healtcheck TCP connection can not be
established, interval at which the retry attempt
will be made to connect to the peer."
DEFVAL { 30 }
::= { vlagCfg 18 }
vlagNewCfgHlthchkConnectRetryInterval OBJECT-TYPE
SYNTAX INTEGER (1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In case of healtcheck TCP connection can not be
established, interval at which the retry attempt
will be made to connect to the peer."
DEFVAL { 30 }
::= { vlagCfg 19 }
vlagCurCfgHlthchkKeepaliveAttempts OBJECT-TYPE
SYNTAX INTEGER (1..24)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of keepalive attempts made before declaring
peer is down. Within this time, atleast one of the
keepalive message should have been received from the peer."
DEFVAL { 3 }
::= { vlagCfg 20 }
vlagNewCfgHlthchkKeepaliveAttempts OBJECT-TYPE
SYNTAX INTEGER (1..24)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of keepalive attempts made before declaring
peer is down.Within this time, atleast one of the
keepalive message should have been received from the peer."
DEFVAL { 3 }
::= { vlagCfg 21 }
vlagCurCfgHlthchkKeepaliveInterval OBJECT-TYPE
SYNTAX INTEGER (2..300)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval between keepalives sent over healthcheck
TCP session to keep the session alive."
DEFVAL { 5 }
::= { vlagCfg 22 }
vlagNewCfgHlthchkKeepaliveInterval OBJECT-TYPE
SYNTAX INTEGER (2..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval between keepalives sent over healthcheck
TCP session to keep the session alive."
DEFVAL { 5 }
::= { vlagCfg 23 }
vlagCurCfgAutoRecoveryInterval OBJECT-TYPE
SYNTAX INTEGER (240..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current vLAG Auto Recovery interval"
DEFVAL { 300 }
::= { vlagCfg 24 }
vlagNewCfgAutoRecoveryInterval OBJECT-TYPE
SYNTAX INTEGER (240..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to change the vLAG Auto Recovery Timer
interval. The Timer is used to prevent all vlag ports stay
in ErrDisabled state when booting two vLAG switches but one
can not be up."
DEFVAL { 300 }
::= { vlagCfg 25 }
vlagCurCfgHlthchkPeerIpv6 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Health check Peer ipv6 address."
DEFVAL { "0:0:0:0:0:0:0:0" }
::= { vlagCfg 26 }
vlagNewCfgHlthchkPeerIpv6 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The New Health check Peer ipv6 address."
DEFVAL { "0:0:0:0:0:0:0:0" }
::= { vlagCfg 27 }
-- ----------------------------------------------------------------------------
-- Global VLAG Info
-- ----------------------------------------------------------------------------
vlagInfoState OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current running state of vLAG."
::= { vlagInfoSystem 1 }
vlagInfoAdminRole OBJECT-TYPE
SYNTAX INTEGER {
unelected(0),
primary(1),
secondary(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current running role of the switch.
Role can be Primary(1), secondary(2) and unelected(3).
Primary role indicates that the this switch controls the centralized
operation in a vLAG domain. Secondary role indicates that this
switch can take up the primary role when primary is not available.
Unelected indicates that switches are not detected by one another"
::= {vlagInfoSystem 2 }
vlagInfoISLId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vLAG ISL trunk id."
::= {vlagInfoSystem 3 }
vlagInfoLocalMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Local vLAG MAC address."
::= {vlagInfoSystem 4 }
vlagInfoLocalPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Local vLAG Priority."
::= {vlagInfoSystem 5 }
vlagInfoRemoteMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote vLAG MAC address."
::= {vlagInfoSystem 6 }
vlagInfoRemotePriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote vLAG Priority."
::= {vlagInfoSystem 7 }
vlagInfoHlthchkStatus OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current health check running status."
::= { vlagInfoSystem 8 }
vlagInfoStartupDelayInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Startup Delay Timer Interval. The value may be
different from vlagCurCfgStartupDelayInterval for
the configuration of the interval after the timer
is started can only take effect next startup."
::= {vlagInfoSystem 9 }
vlagInfoStartupDelayStatus OBJECT-TYPE
SYNTAX INTEGER {
unstarted(1),
running(2),
finished(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Startup Delay Timer Status."
::= {vlagInfoSystem 10 }
vlagInfoSystemMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"System vLAG MAC address"
::= {vlagInfoSystem 11 }
vlagInfoOperaRole OBJECT-TYPE
SYNTAX INTEGER {
unelected(0),
primary(1),
secondary(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vLAG switch operational role."
::= {vlagInfoSystem 12 }
vlagInfoAutoRecoveryInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Auto Recovery Timer Interval. The value may be
different from vlagCurCfgAutoRecoveryInterval for
the configuration of the interval after the timer
is started can only take effect next startup."
::= {vlagInfoSystem 13 }
vlagInfoAutoRecoveryStatus OBJECT-TYPE
SYNTAX INTEGER {
unstarted(1),
running(2),
finished(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Auto Recovery Timer Status."
::= {vlagInfoSystem 14 }
vlagInfoInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlagInfoInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects of the running vLAG instances."
::= { vlagInfoGroup 1 }
vlagInfoInstanceEntry OBJECT-TYPE
SYNTAX VlagInfoInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration objects for an vLAG group."
INDEX { vlagInstanceId }
::= { vlagInfoInstanceTable 1 }
VlagInfoInstanceEntry ::= SEQUENCE {
vlagInstanceId Integer32,
vlagInstanceTrunkId Integer32,
vlagInstanceAdminKey Integer32,
vlagInstanceState INTEGER
}
vlagInstanceId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of this instance."
::= { vlagInfoInstanceEntry 1 }
vlagInstanceTrunkId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trunk id of this vLAG instance."
::= { vlagInfoInstanceEntry 2 }
vlagInstanceAdminKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AdminKey of this vLAG instance. Applicable only incase of
dynamic trunks."
::= { vlagInfoInstanceEntry 3 }
vlagInstanceState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
localUp(2),
remoteUp(3),
formed(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current running state of the vLAG instance."
DEFVAL { down }
::= { vlagInfoInstanceEntry 4 }
vlagInfoIslId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "vLAG ISL Id"
::= {vlagInfoIslGroup 1 }
vlagInfoIslProtocol OBJECT-TYPE
SYNTAX INTEGER {
static(1),
lacp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "vLAG ISL trunk group state
Static - static trunk group
Lacp - dynamic trunk group"
::= {vlagInfoIslGroup 3 }
vlagInfoIslPortchannel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "vLAG ISL portchannel number"
::= {vlagInfoIslGroup 4 }
vlagInfoIslAdminkey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "vLAG ISL lacp admin key"
::= {vlagInfoIslGroup 5 }
vlagInfoIslPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port list that forms the ISL. The ports are presented
in bitmap format.
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to ISL
0 - The represented port does not belong to ISL"
::= {vlagInfoIslGroup 6 }
vlagInfoIslPortState OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ISL member ports' protocol state. The ports' protocol
state are presented in bitmap format.
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to ISL and protocol state is up
0 - The represented port does not belong to ISL or protocol state is down"
::= {vlagInfoIslGroup 7 }
vlagInfoIslPortLinkState OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ISL member ports' link state. The ports' link state are
presented in bitmap format.
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to ISL and link state is up
0 - The represented port does not belong to ISL or link state is down"
::= {vlagInfoIslGroup 8 }
-- ----------------------------------------------------------------------------
-- Global VLAG Statistics
-- ----------------------------------------------------------------------------
-- vlagStatsSystem OBJECT IDENTIFIER ::= { vlagStats 1 }
-- vlagStatsIsl OBJECT IDENTIFIER ::= { vlagStats 2 }
-- vlagStatsHealth OBJECT IDENTIFIER ::= { vlagStats 3 }
-- vlagStatsLacp OBJECT IDENTIFIER ::= { vlagStats 4 }
-- vlagStatsPdu OBJECT IDENTIFIER ::= { vlagStats 5 }
-- vlagStatsIgmp OBJECT IDENTIFIER ::= { vlagStats 6 }
vlagStatsClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
other(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to 'clear' will reset all statistics
objects of VLAG. A get action of this object will always
return 'other'. Setting this object to 'other' is not
allowed."
::= { vlagStatsSystem 1 }
vlagStatsIslInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag ISL octets received."
::= { vlagStatsIsl 1 }
vlagStatsIslInPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag ISL packets received."
::= { vlagStatsIsl 2 }
vlagStatsIslOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag ISL octets sent."
::= { vlagStatsIsl 3 }
vlagStatsIslOutPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag ISL packets sent."
::= { vlagStatsIsl 4 }
vlagStatsPduSentRoleElection OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for role elections"
::= { vlagStatsPdu 1 }
vlagStatsPduSentSystemInfo OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for system info"
::= { vlagStatsPdu 2 }
vlagStatsPduSentFdbDynamicAdd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for addition of FDB dynamic entry"
::= { vlagStatsPdu 7 }
vlagStatsPduSentFdbDynamicDel OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for deletion of FDB dynamic entry"
::= { vlagStatsPdu 8 }
vlagStatsPduSentFdbInactiveAdd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for addition of FDB inactive entry"
::= { vlagStatsPdu 9 }
vlagStatsPduSentFdbInactiveDel OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for deletion of FDB inactive entry"
::= { vlagStatsPdu 10 }
vlagStatsPduSentHlthCheck OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for Health check"
::= { vlagStatsPdu 13 }
vlagStatsPduSentOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for others"
::= { vlagStatsPdu 15 }
vlagStatsPduSentUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for unknowns"
::= { vlagStatsPdu 16 }
vlagStatsPduRcvRoleElection OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for role elections"
::= { vlagStatsPdu 17 }
vlagStatsPduRcvSystemInfo OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for system info"
::= { vlagStatsPdu 18 }
vlagStatsPduRcvFdbDynamicAdd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for addition of FDB dynamic entry"
::= { vlagStatsPdu 23 }
vlagStatsPduRcvFdbDynamicDel OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for deletion of FDB dynamic entry"
::= { vlagStatsPdu 24 }
vlagStatsPduRcvFdbInactiveAdd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for addition of FDB inactive entry"
::= { vlagStatsPdu 25 }
vlagStatsPduRcvFdbInactiveDel OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for deletion of FDB inactive entry"
::= { vlagStatsPdu 26 }
vlagStatsPduRcvHlthCheck OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for Health check"
::= { vlagStatsPdu 29 }
vlagStatsPduRcvOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for others"
::= { vlagStatsPdu 31 }
vlagStatsPduRcvUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for unknowns"
::= { vlagStatsPdu 32 }
vlagStatsPduSentPeerInstanceEnable OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for peer instance enable"
::= { vlagStatsPdu 33 }
vlagStatsPduSentPeerInstanceDisable OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for peer instance disable"
::= { vlagStatsPdu 34 }
vlagStatsPduSentISLHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for ISL hello"
::= { vlagStatsPdu 35 }
vlagStatsPduRcvISLHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for ISL hello"
::= { vlagStatsPdu 36 }
vlagStatsPduRcvPeerInstanceEnable OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for peer instance enable"
::= { vlagStatsPdu 37 }
vlagStatsPduRcvPeerInstanceDisable OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for peer instance disable"
::= { vlagStatsPdu 38 }
vlagStatsIgmpReportsForwarded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP reports forwarded to the peer"
::= { vlagStatsIgmp 1 }
vlagStatsIgmpLeavesForwarded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP leaves forwarded to the peer"
::= { vlagStatsIgmp 2 }
-- ----------------------------------------------------------------------------
-- { INSERT: ecp
-- ----------------------------------------------------------------------------
-- ------------------------------------------------------------------------- --
-- ECP Configuration {
-- ------------------------------------------------------------------------- --
ecpCurCfgRetrans OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ECP retransmission interval in millisecond"
::= { ecpCfg 1 }
ecpNewCfgRetrans OBJECT-TYPE
SYNTAX INTEGER (100..9000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ECP retransmission interval in millisecond"
::= { ecpCfg 2 }
-- ------------------------------------------------------------------------- --
-- ECP Configuration (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- ECP Information {
-- ------------------------------------------------------------------------- --
ecpChnlInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF EcpChnlInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of ECP channel Info."
::= { ecpInfo 1 }
ecpChnlInfoEntry OBJECT-TYPE
SYNTAX EcpChnlInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about ECP channel."
INDEX { ecpChnlInfoEntryIndex }
::= { ecpChnlInfoTable 1 }
EcpChnlInfoEntry ::= SEQUENCE {
ecpChnlInfoEntryIndex Integer32
,ecpChnlPort Integer32
,ecpChnlStag Integer32
,ecpChnlSndlen Integer32
,ecpChnlSndnxt Integer32
,ecpChnlRcvlast Integer32
,ecpChnlStateMachine Integer32
,ecpChnlRxCnt Integer32
,ecpChnlTxCnt Integer32
,ecpChnlRxDrop Integer32
,ecpChnlTxDrop Integer32
,ecpChnlState INTEGER
,ecpChnlAckErr Integer32
}
ecpChnlInfoEntryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ecp chnl info table."
::= { ecpChnlInfoEntry 1 }
ecpChnlPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ecp channel port info."
::= { ecpChnlInfoEntry 2 }
ecpChnlStag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ecp channel stag info."
::= { ecpChnlInfoEntry 3 }
ecpChnlSndlen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ecp channel send length info."
::= { ecpChnlInfoEntry 4 }
ecpChnlSndnxt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ecp channel send next info."
::= { ecpChnlInfoEntry 5 }
ecpChnlRcvlast OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ecp channel recv last sequence info."
::= { ecpChnlInfoEntry 6 }
ecpChnlStateMachine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ecp channel state machineinfo."
::= { ecpChnlInfoEntry 7 }
ecpChnlRxCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ecp channel Rx count info."
::= { ecpChnlInfoEntry 8 }
ecpChnlTxCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ecp channel Tx count info."
::= { ecpChnlInfoEntry 9 }
ecpChnlRxDrop OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ecp channel RxDrop info."
::= { ecpChnlInfoEntry 10 }
ecpChnlTxDrop OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ecp channel TxDrop info."
::= { ecpChnlInfoEntry 11 }
ecpChnlState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ecp channel state info."
::= { ecpChnlInfoEntry 12 }
ecpChnlAckErr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ecp channel ACK error info."
::= { ecpChnlInfoEntry 13 }
-- ------------------------------------------------------------------------- --
-- ECP Information (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- ECP Operation {
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- ECP Operation (end) }
-- ------------------------------------------------------------------------- --
-- ----------------------------------------------------------------------------
-- } INSERT: layer2
-- ----------------------------------------------------------------------------
layer3 OBJECT IDENTIFIER ::= { g8124-mgmt 3 }
-- ----------------------------------------------------------------------------
-- { INSERT: layer3
-- ----------------------------------------------------------------------------
layer3Configs OBJECT IDENTIFIER ::= { layer3 1 }
layer3Stats OBJECT IDENTIFIER ::= { layer3 2 }
layer3Info OBJECT IDENTIFIER ::= { layer3 3 }
layer3Oper OBJECT IDENTIFIER ::= { layer3 4 }
ipInterfaceCfg OBJECT IDENTIFIER ::= { layer3Configs 1 }
ipInterfaceLoopbackCfg OBJECT IDENTIFIER ::= { layer3Configs 24 }
ipGatewayCfg OBJECT IDENTIFIER ::= { layer3Configs 2 }
ipStaticRouteCfg OBJECT IDENTIFIER ::= { layer3Configs 3 }
ipForwardCfg OBJECT IDENTIFIER ::= { layer3Configs 4 }
vrrpCfg OBJECT IDENTIFIER ::= { layer3Configs 6 }
arpCfg OBJECT IDENTIFIER ::= { layer3Configs 7 }
ipBootpCfg OBJECT IDENTIFIER ::= { layer3Configs 8 }
dnsCfg OBJECT IDENTIFIER ::= { layer3Configs 9 }
ipNwfCfg OBJECT IDENTIFIER ::= { layer3Configs 10 }
ipRmapCfg OBJECT IDENTIFIER ::= { layer3Configs 11 }
bgpCfg OBJECT IDENTIFIER ::= { layer3Configs 12 }
ospfCfg OBJECT IDENTIFIER ::= { layer3Configs 13 }
ipGeneralCfg OBJECT IDENTIFIER ::= { layer3Configs 14 }
ipStaticArpCfg OBJECT IDENTIFIER ::= { layer3Configs 15 }
rip2Cfg OBJECT IDENTIFIER ::= { layer3Configs 18 }
igmpCfg OBJECT IDENTIFIER ::= { layer3Configs 19 }
ipStaticNbrCfg OBJECT IDENTIFIER ::= { layer3Configs 21 }
ipGatewayIpv6Cfg OBJECT IDENTIFIER ::= { layer3Configs 22 }
ipStaticRoute6Cfg OBJECT IDENTIFIER ::= { layer3Configs 23 }
ospf3Cfg OBJECT IDENTIFIER ::= { layer3Configs 26 }
pptCfg OBJECT IDENTIFIER ::= { layer3Configs 27 }
ipv6pmtuCfg OBJECT IDENTIFIER ::= { layer3Configs 28 }
mldCfg OBJECT IDENTIFIER ::= { layer3Configs 30 }
ndprefixCfg OBJECT IDENTIFIER ::= { layer3Configs 31 }
dhcpsnpCfg OBJECT IDENTIFIER ::= { layer3Configs 33 }
ipsecCfg OBJECT IDENTIFIER ::= { layer3Configs 32 }
arpStats OBJECT IDENTIFIER ::= { layer3Stats 2 }
routeStats OBJECT IDENTIFIER ::= { layer3Stats 3 }
dnsStats OBJECT IDENTIFIER ::= { layer3Stats 4 }
vrrpStats OBJECT IDENTIFIER ::= { layer3Stats 5 }
ospfStats OBJECT IDENTIFIER ::= { layer3Stats 6 }
clearStats OBJECT IDENTIFIER ::= { layer3Stats 7 }
igmpStats OBJECT IDENTIFIER ::= { layer3Stats 9 }
ipv6Stats OBJECT IDENTIFIER ::= { layer3Stats 10}
rip2Stats OBJECT IDENTIFIER ::= { layer3Stats 13 }
ipStats OBJECT IDENTIFIER ::= { layer3Stats 16 }
icmpStats OBJECT IDENTIFIER ::= { layer3Stats 17 }
tcpStats OBJECT IDENTIFIER ::= { layer3Stats 18 }
udpStats OBJECT IDENTIFIER ::= { layer3Stats 19 }
bootpStats OBJECT IDENTIFIER ::= { layer3Stats 20 }
ospf3Stats OBJECT IDENTIFIER ::= { layer3Stats 22 }
mldStats OBJECT IDENTIFIER ::= { layer3Stats 23 }
ipsecStats OBJECT IDENTIFIER ::= { layer3Stats 24 }
nbrStats OBJECT IDENTIFIER ::= { layer3Stats 26 }
dhcpsnpStats OBJECT IDENTIFIER ::= { layer3Stats 25}
ipRoutingInfo OBJECT IDENTIFIER ::= { layer3Info 1 }
ipEcmpRoutingInfo OBJECT IDENTIFIER ::= { layer3Info 19 }
ipEcmpHash OBJECT IDENTIFIER ::= { layer3Info 20 }
ipv6PmtuInfo OBJECT IDENTIFIER ::= { layer3Info 21}
arpInfo OBJECT IDENTIFIER ::= { layer3Info 2 }
vrrpInfo OBJECT IDENTIFIER ::= { layer3Info 3 }
ospfinfo OBJECT IDENTIFIER ::= { layer3Info 4 }
gatewayInfo OBJECT IDENTIFIER ::= { layer3Info 5 }
igmpInfo OBJECT IDENTIFIER ::= { layer3Info 6 }
nbrInfo OBJECT IDENTIFIER ::= { layer3Info 12 }
gatewayIPv6Info OBJECT IDENTIFIER ::= { layer3Info 13 }
ipRoute6Info OBJECT IDENTIFIER ::= { layer3Info 14 }
ipInfo OBJECT IDENTIFIER ::= { layer3Info 8 }
ipIntfInfo OBJECT IDENTIFIER ::= { layer3Info 9 }
ipIntfLoopbackInfo OBJECT IDENTIFIER ::= { layer3Info 16 }
rip2Info OBJECT IDENTIFIER ::= { layer3Info 10 }
bgpInfo OBJECT IDENTIFIER ::= { layer3Info 11 }
dhcpInfo OBJECT IDENTIFIER ::= { layer3Info 15 }
ospf3Info OBJECT IDENTIFIER ::= { layer3Info 18 }
mldInfo OBJECT IDENTIFIER ::= { layer3Info 22 }
ipsecInfo OBJECT IDENTIFIER ::= { layer3Info 23 }
dhcpsnpInfo OBJECT IDENTIFIER ::= { layer3Info 24 }
-- ----------------------------------------------------------------------------
-- { INSERT: DHCP Snooping Config
-- ----------------------------------------------------------------------------
dhcpSnoopingCurCfgOnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP Snooping ON/OFF settings."
::= { dhcpsnpCfg 1 }
dhcpSnoopingNewCfgOnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP Snooping ON/OFF setting."
::= { dhcpsnpCfg 2 }
dhcpSnoopingCurCfgOption82OnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"on/off state of DHCP Snooping option82."
::= { dhcpsnpCfg 3 }
dhcpSnoopingNewCfgOption82OnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable DHCP Snooping option82"
::= { dhcpsnpCfg 4 }
dhcpSnoopingCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF DHCPSnoopingCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP Snooping Port Configuration Table."
::= { dhcpsnpCfg 5 }
dhcpSnoopingCurCfgPortTableEntry OBJECT-TYPE
SYNTAX DHCPSnoopingCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in DHCP Snooping Port Configuration Table"
INDEX { dhcpSnoopingCurCfgPortId }
::= { dhcpSnoopingCurCfgPortTable 1 }
DHCPSnoopingCurCfgPortTableEntry ::= SEQUENCE {
dhcpSnoopingCurCfgPortId Integer32,
dhcpSnoopingCurCfgPortTrusted INTEGER,
dhcpSnoopingCurCfgPortRateLimit Integer32
}
dhcpSnoopingCurCfgPortId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port ID of this DHCP Snooping port configration."
::= { dhcpSnoopingCurCfgPortTableEntry 1 }
dhcpSnoopingCurCfgPortTrusted OBJECT-TYPE
SYNTAX INTEGER {
trusted(1),
untrusted(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set port as trusted or untrusted port."
::= { dhcpSnoopingCurCfgPortTableEntry 2 }
dhcpSnoopingCurCfgPortRateLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set port DHCP packet rate limit(pps).
Its ranges is 0 ~ 2048, set 0 to disable rate limit."
::= { dhcpSnoopingCurCfgPortTableEntry 3 }
dhcpSnoopingNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF DHCPSnoopingNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP Snooping Port Configuration Table."
::= { dhcpsnpCfg 6 }
dhcpSnoopingNewCfgPortTableEntry OBJECT-TYPE
SYNTAX DHCPSnoopingNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the DHCP Snooping Port Configuration Table"
INDEX { dhcpSnoopingNewCfgportId }
::= { dhcpSnoopingNewCfgPortTable 1 }
DHCPSnoopingNewCfgPortTableEntry ::= SEQUENCE {
dhcpSnoopingNewCfgportId Integer32,
dhcpSnoopingNewCfgportTrusted INTEGER,
dhcpSnoopingNewCfgportRateLimit Integer32
}
dhcpSnoopingNewCfgportId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port ID of this DHCP Snooping port configration."
::= { dhcpSnoopingNewCfgPortTableEntry 1 }
dhcpSnoopingNewCfgportTrusted OBJECT-TYPE
SYNTAX INTEGER {
trusted(1),
untrusted(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set port as trusted or untrusted port."
::= { dhcpSnoopingNewCfgPortTableEntry 2 }
dhcpSnoopingNewCfgportRateLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set port DHCP packet rate limit(pps). Set 0 to disable rate limit."
::= { dhcpSnoopingNewCfgPortTableEntry 3 }
dhcpSnoopingCurCfgVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF DHCPSnoopingCurCfgVlanTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP Snooping VLAN Table."
::= { dhcpsnpCfg 7 }
dhcpSnoopingCurCfgVlanTableEntry OBJECT-TYPE
SYNTAX DHCPSnoopingCurCfgVlanTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the DHCP Snooping VLAN Table"
INDEX { dhcpSnoopingCurCfgVlanId }
::= { dhcpSnoopingCurCfgVlanTable 1 }
DHCPSnoopingCurCfgVlanTableEntry ::= SEQUENCE {
dhcpSnoopingCurCfgVlanId Integer32,
dhcpSnoopingCurCfgVlanOnState INTEGER
}
dhcpSnoopingCurCfgVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of this DHCP Snooping VLAN configration."
::= { dhcpSnoopingCurCfgVlanTableEntry 1 }
dhcpSnoopingCurCfgVlanOnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"on/off state of DHCP Snooping on this VLAN."
::= { dhcpSnoopingCurCfgVlanTableEntry 2 }
dhcpSnoopingNewCfgVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF DHCPSnoopingNewCfgVLANTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP Snooping VLAN Table."
::= { dhcpsnpCfg 8 }
dhcpSnoopingNewCfgVlanTableEntry OBJECT-TYPE
SYNTAX DHCPSnoopingNewCfgVLANTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the DHCP Snooping VLAN Table"
INDEX { dhcpSnoopingNewCfgVlanId }
::= { dhcpSnoopingNewCfgVlanTable 1 }
DHCPSnoopingNewCfgVLANTableEntry ::= SEQUENCE {
dhcpSnoopingNewCfgVlanId Integer32,
dhcpSnoopingNewCfgVlanOnState INTEGER
}
dhcpSnoopingNewCfgVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN ID of this DHCP Snooping VLAN configration."
::= { dhcpSnoopingNewCfgVlanTableEntry 1 }
dhcpSnoopingNewCfgVlanOnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable DHCP Snooping on this VLAN."
::= { dhcpSnoopingNewCfgVlanTableEntry 2 }
dhcpSnoopingBindingInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF DHCPSnoopingBindingInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP Snooping binding Table."
::= { dhcpsnpInfo 1 }
dhcpSnoopingBindingInfoEntry OBJECT-TYPE
SYNTAX DHCPSnoopingBindingInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the DHCP Snooping binding Table"
INDEX { dhcpSnoopingBindingInfoIndex }
::= { dhcpSnoopingBindingInfoTable 1 }
DHCPSnoopingBindingInfoEntry ::= SEQUENCE {
dhcpSnoopingBindingInfoIndex Integer32,
dhcpSnoopingBindingInfoMac OCTET STRING,
dhcpSnoopingBindingInfoIp IpAddress,
dhcpSnoopingBindingInfoVLAN Integer32,
dhcpSnoopingBindingInfoPort Integer32,
dhcpSnoopingBindingInfoExpiry Unsigned32,
dhcpSnoopingBindingInfoType INTEGER
}
dhcpSnoopingBindingInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of this DHCP Snooping binding entry."
::= { dhcpSnoopingBindingInfoEntry 1 }
dhcpSnoopingBindingInfoMac OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Mac Address of this DHCP Snooping binding entry."
::= { dhcpSnoopingBindingInfoEntry 2 }
dhcpSnoopingBindingInfoIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ip Address of this DHCP Snooping binding entry."
::= { dhcpSnoopingBindingInfoEntry 3 }
dhcpSnoopingBindingInfoVLAN OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN ID of this DHCP Snooping binding entry."
::= { dhcpSnoopingBindingInfoEntry 4 }
dhcpSnoopingBindingInfoPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port Number of this DHCP Snooping binding entry."
::= { dhcpSnoopingBindingInfoEntry 5 }
dhcpSnoopingBindingInfoExpiry OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lease time of this DHCP Snooping binding entry.
Set 0 to remove this entry"
::= { dhcpSnoopingBindingInfoEntry 6 }
dhcpSnoopingBindingInfoType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
dynamic(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Show How this DHCP Snooping binding entry come from."
::= { dhcpSnoopingBindingInfoEntry 7 }
-- ----------------------------------------------------------------------------
-- { INSERT: DHCP Snooping stat
-- ----------------------------------------------------------------------------
dhcpSnoopingStatInPacketRequest OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter of DHCP REQUEST messages received."
::= { dhcpsnpStats 1 }
dhcpSnoopingStatInPacketReply OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter of DHCP REPLY messages received."
::= { dhcpsnpStats 2 }
dhcpSnoopingStatDroppedPacketInvalid OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter of dropped DHCP messages due to invalid packet."
::= { dhcpsnpStats 3 }
dhcpSnoopingStatDroppedPacketRateLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter of dropped DHCP messages due to Rate Limit in software."
::= { dhcpsnpStats 4 }
dhcpSnoopingStatDroppedPacketOther OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter of dropped DHCP messages due to other reason."
::= { dhcpsnpStats 5 }
vrrpOper OBJECT IDENTIFIER ::= { layer3Oper 1 }
dhcpInfoMacAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the interface."
::= { dhcpInfo 1}
dhcpInfoAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the interface."
::= { dhcpInfo 2}
dhcpInfoSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask of the interface."
::= { dhcpInfo 3}
dhcpInfoDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of default gateway for the interface."
::= { dhcpInfo 4}
dhcpInfoServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the DHCP server that leased the ip of the interface."
::= { dhcpInfo 5}
dhcpInfoLeaseObtained OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time and date when the lease was obtained ."
::= { dhcpInfo 6}
dhcpInfoLeaseExpires OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time and date when the lease was obtained ."
::= { dhcpInfo 7}
-- IP Configuration
ipInterfaceTableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the IP interface table."
::= { ipInterfaceCfg 1 }
ipCurCfgIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP interface configuration."
::= { ipInterfaceCfg 2 }
ipCurCfgIntfEntry OBJECT-TYPE
SYNTAX IpCurCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Ip interface table"
INDEX { ipCurCfgIntfIndex }
::= { ipCurCfgIntfTable 1 }
IpCurCfgIntfEntry ::= SEQUENCE {
ipCurCfgIntfIndex Integer32,
ipCurCfgIntfAddr DisplayString,
ipCurCfgIntfMask DisplayString,
ipCurCfgIntfBroadcast IpAddress,
ipCurCfgIntfState INTEGER,
ipCurCfgIntfBootpRelay INTEGER,
ipCurCfgIntfRouteAdv INTEGER,
ipCurCfgIntfManagedCfg INTEGER,
ipCurCfgIntfOtherCfg INTEGER,
ipCurCfgIntfAdvLifetime INTEGER,
ipCurCfgIntfDadAttempts INTEGER,
ipCurCfgIntfReachTime Gauge32,
ipCurCfgIntfAdvInterval INTEGER,
ipCurCfgIntfAdvIntervalMin INTEGER,
ipCurCfgIntfRetransmitTimer Gauge32,
ipCurCfgIntfHopLimit INTEGER,
ipCurCfgIntfAdvMtu INTEGER,
ipCurCfgIntfIp6Host INTEGER,
ipCurCfgIntfIp6Dstun INTEGER,
ipCurCfgSecIntfAddr DisplayString,
ipCurCfgSecIntfPrefix Integer32,
ipCurCfgSecIntfAnycast INTEGER,
ipCurCfgIntfAnycast INTEGER,
ipCurCfgIntfVlan Integer32
}
ipCurCfgIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the IP information is related."
::= { ipCurCfgIntfEntry 1}
ipCurCfgIntfAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field configures the new IP/IPv6 addr of the interface.
Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { ipCurCfgIntfEntry 2 }
ipCurCfgIntfMask OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask as IPv4 dotted-quads OR
the IPv6 prefix length (integer in range 0..128)
associated with this IP address ."
::= { ipCurCfgIntfEntry 3 }
ipCurCfgIntfBroadcast OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The broadcast address of the interface."
::= { ipCurCfgIntfEntry 4 }
ipCurCfgIntfVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN associated with the interface."
::= { ipCurCfgIntfEntry 5 }
ipCurCfgIntfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the interface."
::= { ipCurCfgIntfEntry 6 }
ipCurCfgIntfBootpRelay OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable BOOTP relay."
::= { ipCurCfgIntfEntry 7 }
ipCurCfgIntfRouteAdv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable route advertisement of the interface."
::= { ipCurCfgIntfEntry 12 }
ipCurCfgIntfManagedCfg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Managed config flag of the interface, which
allows the host to use DHCP for address configuration."
::= { ipCurCfgIntfEntry 13 }
ipCurCfgIntfOtherCfg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Other config flag of the interface,
which allows the host to use DHCP for other stateful configuration."
::= { ipCurCfgIntfEntry 14 }
ipCurCfgIntfAdvLifetime OBJECT-TYPE
SYNTAX INTEGER (0..9000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set Router Advertisement lifetime of the interface."
::= { ipCurCfgIntfEntry 15 }
ipCurCfgIntfDadAttempts OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set the number of duplicate address detection (dad)
attempts of the interface."
::= { ipCurCfgIntfEntry 16 }
ipCurCfgIntfReachTime OBJECT-TYPE
SYNTAX Gauge32 (0..3600000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set the advertised reachability time of the interface in ms."
::= { ipCurCfgIntfEntry 17 }
ipCurCfgIntfAdvInterval OBJECT-TYPE
SYNTAX INTEGER (4..1800)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set the IPv6 Router Advertisement interval of the interface."
::= { ipCurCfgIntfEntry 18 }
ipCurCfgIntfAdvIntervalMin OBJECT-TYPE
SYNTAX INTEGER (3..1350)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set the IPv6 Router Advertisement Minimum interval limit
of the interface."
::= { ipCurCfgIntfEntry 19 }
ipCurCfgIntfRetransmitTimer OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set the IPv6 Router Advertisement Retransmit Timer in ms."
::= { ipCurCfgIntfEntry 20 }
ipCurCfgIntfHopLimit OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set the IPv6 Router Advertisement Current Hop Limit"
::= { ipCurCfgIntfEntry 21 }
ipCurCfgIntfAdvMtu OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Advertise MTU option."
::= { ipCurCfgIntfEntry 22 }
ipCurCfgIntfIp6Host OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable IPv6 host mode on the interface."
::= { ipCurCfgIntfEntry 23 }
ipCurCfgSecIntfAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field configures the new IP/IPv6 addr of the interface.
Address should be in IPv6 4-byte haxadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { ipCurCfgIntfEntry 25 }
ipCurCfgSecIntfPrefix OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 prefix length (integer in range 0..128)
associated with this IP address ."
::= { ipCurCfgIntfEntry 26 }
ipCurCfgIntfAnycast OBJECT-TYPE
SYNTAX INTEGER {
anycast(1),
none(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field has the value of anycast(1) if IPv6 interface address
is anycast and none(2) if not."
::= { ipCurCfgIntfEntry 27 }
ipCurCfgSecIntfAnycast OBJECT-TYPE
SYNTAX INTEGER {
anycast(1),
none(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field has the value of anycast(1) if secondary IPv6 interface address
is anycast and none(2) if not."
::= { ipCurCfgIntfEntry 28 }
ipCurCfgIntfIp6Dstun OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable sending of ICMP Unreachable messages."
::= { ipCurCfgIntfEntry 29 }
ipNewCfgIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of interface in the new configuration block."
::= { ipInterfaceCfg 3 }
ipNewCfgIntfEntry OBJECT-TYPE
SYNTAX IpNewCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Ip interface table"
INDEX { ipNewCfgIntfIndex }
::= { ipNewCfgIntfTable 1 }
IpNewCfgIntfEntry ::= SEQUENCE {
ipNewCfgIntfIndex Integer32,
ipNewCfgIntfAddr DisplayString,
ipNewCfgIntfMask DisplayString,
ipNewCfgIntfVlan Integer32,
ipNewCfgIntfState INTEGER,
ipNewCfgIntfBootpRelay INTEGER,
ipNewCfgIntfRouteAdv INTEGER,
ipNewCfgIntfIp6Host INTEGER,
ipNewCfgIntfIp6Dstun INTEGER,
ipNewCfgIntfManagedCfg INTEGER,
ipNewCfgIntfOtherCfg INTEGER,
ipNewCfgIntfAdvLifetime INTEGER,
ipNewCfgIntfDadAttempts INTEGER,
ipNewCfgIntfReachTime Gauge32,
ipNewCfgIntfAdvInterval INTEGER,
ipNewCfgIntfAdvIntervalMin INTEGER,
ipNewCfgIntfRetransmitTimer Gauge32,
ipNewCfgIntfHopLimit INTEGER,
ipNewCfgIntfAdvMtu INTEGER,
ipNewCfgSecIntfAddr DisplayString,
ipNewCfgSecIntfPrefix Integer32,
ipNewCfgSecIntfAnycast INTEGER,
ipNewCfgIntfAnycast INTEGER,
ipNewCfgIntfDelete INTEGER
}
ipNewCfgIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the IP information is related."
::= { ipNewCfgIntfEntry 1 }
ipNewCfgIntfAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field configures the new IP/IPv6 addr of the interface.
Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { ipNewCfgIntfEntry 2 }
ipNewCfgIntfMask OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The subnet mask as IPv4 dotted-quads OR
the IPv6 prefix length (integer in range 0..128)
associated with this IP address ."
::= { ipNewCfgIntfEntry 3 }
ipNewCfgIntfVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN associated with the interface."
::= { ipNewCfgIntfEntry 5 }
ipNewCfgIntfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the interface."
::= { ipNewCfgIntfEntry 6 }
ipNewCfgIntfDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { ipNewCfgIntfEntry 7 }
ipNewCfgIntfBootpRelay OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable BOOTP relay."
::= { ipNewCfgIntfEntry 8 }
ipNewCfgIntfRouteAdv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable route advertisement of the interface."
::= { ipNewCfgIntfEntry 13 }
ipNewCfgIntfManagedCfg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable Managed config flag of the interface, which
allows the host to use DHCP for address configuration."
::= { ipNewCfgIntfEntry 14 }
ipNewCfgIntfOtherCfg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable Other config flag of the interface,
which allows the host to use DHCP for other stateful configuration."
::= { ipNewCfgIntfEntry 15 }
ipNewCfgIntfAdvLifetime OBJECT-TYPE
SYNTAX INTEGER (0..9000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set Router Advertisement lifetime of the interface."
::= { ipNewCfgIntfEntry 16 }
ipNewCfgIntfDadAttempts OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the number of duplicate address detection (dad)
attempts of the interface."
::= { ipNewCfgIntfEntry 17 }
ipNewCfgIntfReachTime OBJECT-TYPE
SYNTAX Gauge32 (0..3600000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the advertised reachability time of the interface in ms."
::= { ipNewCfgIntfEntry 18 }
ipNewCfgIntfAdvInterval OBJECT-TYPE
SYNTAX INTEGER (4..1800)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the IPv6 Router Advertisement interval of the interface."
::= { ipNewCfgIntfEntry 19 }
ipNewCfgIntfAdvIntervalMin OBJECT-TYPE
SYNTAX INTEGER (3..1350)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the IPv6 Router Advertisement Minimum interval limit
of the interface."
::= { ipNewCfgIntfEntry 20 }
ipNewCfgIntfRetransmitTimer OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the IPv6 Router Advertisement Retransmit Timer in ms."
::= { ipNewCfgIntfEntry 21 }
ipNewCfgIntfHopLimit OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the IPv6 Router Advertisement Current Hop Limit"
::= { ipNewCfgIntfEntry 22 }
ipNewCfgIntfAdvMtu OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable Advertise MTU option."
::= { ipNewCfgIntfEntry 23 }
ipNewCfgIntfIp6Host OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable IPv6 host mode on the interface."
::= { ipNewCfgIntfEntry 24 }
ipNewCfgSecIntfAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field configures the new IPv6 addr of the interface.
Address should be in IPv6 4-byte haxadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { ipNewCfgIntfEntry 26 }
ipNewCfgSecIntfPrefix OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 prefix length (integer in range 0..128)
associated with this IP address ."
::= { ipNewCfgIntfEntry 27 }
ipNewCfgIntfAnycast OBJECT-TYPE
SYNTAX INTEGER {
anycast(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field has the value of anycast(1) if IPv6 interface address
is anycast and none(2) if not."
::= { ipNewCfgIntfEntry 28 }
ipNewCfgSecIntfAnycast OBJECT-TYPE
SYNTAX INTEGER {
anycast(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field has the value of anycast(1) if secondary IPv6 interface address
is anycast and none(2) if not."
::= { ipNewCfgIntfEntry 29 }
ipNewCfgIntfIp6Dstun OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable sending of ICMP Unreachable messages."
::= { ipNewCfgIntfEntry 30 }
-- IP Loopback Configuration
ipInterfaceLoopbackTableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the IP Loopback interface table."
::= { ipInterfaceLoopbackCfg 1 }
ipCurCfgIntfLoopbackTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgIntfLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP Loopback interface configuration."
::= { ipInterfaceLoopbackCfg 2 }
ipCurCfgIntfLoopbackEntry OBJECT-TYPE
SYNTAX IpCurCfgIntfLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Ip Loopback interface table"
INDEX { ipCurCfgIntfLoopbackIndex }
::= { ipCurCfgIntfLoopbackTable 1 }
IpCurCfgIntfLoopbackEntry ::= SEQUENCE {
ipCurCfgIntfLoopbackIndex Integer32,
ipCurCfgIntfLoopbackAddr IpAddress,
ipCurCfgIntfLoopbackMask IpAddress,
ipCurCfgIntfLoopbackBroadcast IpAddress,
ipCurCfgIntfLoopbackState INTEGER
}
ipCurCfgIntfLoopbackIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Loopback interface number for which the IP information is related."
::= { ipCurCfgIntfLoopbackEntry 1}
ipCurCfgIntfLoopbackAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the interface."
::= { ipCurCfgIntfLoopbackEntry 2 }
ipCurCfgIntfLoopbackMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask of the interface."
::= { ipCurCfgIntfLoopbackEntry 3 }
ipCurCfgIntfLoopbackBroadcast OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The broadcast address of the interface."
::= { ipCurCfgIntfLoopbackEntry 4 }
ipCurCfgIntfLoopbackState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the interface."
::= { ipCurCfgIntfLoopbackEntry 6 }
ipNewCfgIntfLoopbackTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgIntfLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of loopback interface in the new configuration block."
::= { ipInterfaceLoopbackCfg 3 }
ipNewCfgIntfLoopbackEntry OBJECT-TYPE
SYNTAX IpNewCfgIntfLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Ip Loopback interface table"
INDEX { ipNewCfgIntfLoopbackIndex }
::= { ipNewCfgIntfLoopbackTable 1 }
IpNewCfgIntfLoopbackEntry ::= SEQUENCE {
ipNewCfgIntfLoopbackIndex Integer32,
ipNewCfgIntfLoopbackAddr IpAddress,
ipNewCfgIntfLoopbackMask IpAddress,
ipNewCfgIntfLoopbackState INTEGER,
ipNewCfgIntfLoopbackDelete INTEGER
}
ipNewCfgIntfLoopbackIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Loopback interface number for which the IP information is related."
::= { ipNewCfgIntfLoopbackEntry 1 }
ipNewCfgIntfLoopbackAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address of the interface."
::= { ipNewCfgIntfLoopbackEntry 2 }
ipNewCfgIntfLoopbackMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The subnet mask of the interface."
::= { ipNewCfgIntfLoopbackEntry 3 }
ipNewCfgIntfLoopbackState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the interface."
::= { ipNewCfgIntfLoopbackEntry 6 }
ipNewCfgIntfLoopbackDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { ipNewCfgIntfLoopbackEntry 7 }
-- IP Gateway Table Configuration
ipGatewayTableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the IP gateway table."
::= { ipGatewayCfg 3 }
ipCurCfgGwTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgGwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of gateways in the current configuration block."
::= { ipGatewayCfg 4 }
ipCurCfgGwEntry OBJECT-TYPE
SYNTAX IpCurCfgGwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Ip gateway table"
INDEX { ipCurCfgGwIndex }
::= { ipCurCfgGwTable 1 }
IpCurCfgGwEntry ::= SEQUENCE {
ipCurCfgGwIndex Integer32,
ipCurCfgGwAddr IpAddress,
ipCurCfgGwInterval INTEGER,
ipCurCfgGwRetry INTEGER,
ipCurCfgGwArp INTEGER,
ipCurCfgGwState INTEGER
}
ipCurCfgGwIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The gateway number for which the information is related."
::= { ipCurCfgGwEntry 1}
ipCurCfgGwAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the default gateway."
::= { ipCurCfgGwEntry 2 }
ipCurCfgGwInterval OBJECT-TYPE
SYNTAX INTEGER (0..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval between ping attempts."
::= { ipCurCfgGwEntry 3 }
ipCurCfgGwRetry OBJECT-TYPE
SYNTAX INTEGER (1..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of failed attempts to declare the default gateway DOWN."
::= { ipCurCfgGwEntry 4 }
ipCurCfgGwState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the default gateway."
::= { ipCurCfgGwEntry 5 }
ipCurCfgGwArp OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of ARP only health checks."
::= { ipCurCfgGwEntry 6 }
ipNewCfgGwTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgGwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of gateway in the new configuration block."
::= { ipGatewayCfg 5 }
ipNewCfgGwEntry OBJECT-TYPE
SYNTAX IpNewCfgGwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Ip default gateway table"
INDEX { ipNewCfgGwIndex }
::= { ipNewCfgGwTable 1 }
IpNewCfgGwEntry ::= SEQUENCE {
ipNewCfgGwIndex Integer32,
ipNewCfgGwAddr IpAddress,
ipNewCfgGwInterval INTEGER,
ipNewCfgGwRetry INTEGER,
ipNewCfgGwState INTEGER,
ipNewCfgGwArp INTEGER,
ipNewCfgGwDelete INTEGER
}
ipNewCfgGwIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The gateway number for which the information is related."
::= { ipNewCfgGwEntry 1}
ipNewCfgGwAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address of the default gateway."
::= { ipNewCfgGwEntry 2 }
ipNewCfgGwInterval OBJECT-TYPE
SYNTAX INTEGER (0..60)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interval in seconds between ping attempts."
::= { ipNewCfgGwEntry 3 }
ipNewCfgGwRetry OBJECT-TYPE
SYNTAX INTEGER (1..120)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of failed attempts to declare the default gateway DOWN."
::= { ipNewCfgGwEntry 4 }
ipNewCfgGwState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the default gateway."
::= { ipNewCfgGwEntry 5 }
ipNewCfgGwDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row."
::= { ipNewCfgGwEntry 6 }
ipNewCfgGwArp OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the ARP only health checks."
::= { ipNewCfgGwEntry 7 }
--
-- IP Static Route Configuration
--
ipStaticRouteTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the Static Route table."
::= { ipStaticRouteCfg 1 }
ipCurCfgStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static routes in the current configuration block."
::= { ipStaticRouteCfg 2 }
ipCurCfgStaticRouteEntry OBJECT-TYPE
SYNTAX IpCurCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static IP route table"
INDEX { ipCurCfgStaticRouteIndx }
::= { ipCurCfgStaticRouteTable 1 }
IpCurCfgStaticRouteEntry ::= SEQUENCE {
ipCurCfgStaticRouteIndx Integer32,
ipCurCfgStaticRouteDestIp IpAddress,
ipCurCfgStaticRouteMask IpAddress,
ipCurCfgStaticRouteGateway IpAddress,
ipCurCfgStaticRouteInterface Integer32
}
ipCurCfgStaticRouteIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the static routing table."
::= { ipCurCfgStaticRouteEntry 1}
ipCurCfgStaticRouteDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { ipCurCfgStaticRouteEntry 2}
ipCurCfgStaticRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current subnet mask of this route."
::= { ipCurCfgStaticRouteEntry 3}
ipCurCfgStaticRouteGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current gateway of this route."
::= { ipCurCfgStaticRouteEntry 4}
ipCurCfgStaticRouteInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP interface of this route. The IP address of the specified
interface shall be use as source IP when performs routing."
::= { ipCurCfgStaticRouteEntry 5}
ipNewCfgStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static routes in the new configuration block."
::= { ipStaticRouteCfg 3 }
ipStaticRouteClearAllByDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all static routes with the specified destination IP address."
::= { ipStaticRouteCfg 4}
ipStaticRouteClearAllByGatewayIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all static routes with the specified gateway IP address."
::= { ipStaticRouteCfg 5}
ipStaticRouteClearAllByInterface OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all routes on the specified inteface number."
::= { ipStaticRouteCfg 6}
ipStaticRouteClearAll OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to clear(2),clears all static routes. Otherwhise nothing is done."
::= { ipStaticRouteCfg 7}
ipStaticRouteCurPingInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time between ping retries."
::= { ipStaticRouteCfg 8}
ipStaticRouteNewPingInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time between ping retries."
::= { ipStaticRouteCfg 9}
ipStaticRouteCurPingRetries OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ping retries."
::= { ipStaticRouteCfg 10}
ipStaticRouteNewPingRetries OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of ping retries."
::= { ipStaticRouteCfg 11}
ipStaticRouteCurEcmpHash OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ecmp Hash mechanism.It is a BIT mask
which represents the combination of
different parameters which can be used for
ECMP hashing
ECMP_HASH_SIP ------ 0x00000001
- Include Source IP for ECMP hash
ECMP_HASH_DIP ------ 0x00000002
- Include destination IP for ECMP hash
ECMP_HASH_PROT ------ 0x00000004
- Include layer3 protocol for ECMP hash
ECMP_HASH_TCP ------ 0x00000008
- Enable L4 source/destination port hash if protocl is TCP
ECMP_HASH_UDP ------ 0x00000010
- Enable L4 source/destination port hash if protocl is UDP
ECMP_HASH_L4SRC------ 0x00000020
- Include L4 source port for ECMP hash
ECMP_HASH_L4DST------ 0x00000040
- Include L4 destination port for ECMP hash
"
::= { ipStaticRouteCfg 12}
ipStaticRouteNewEcmpHash OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ecmp Hash mechanism.It is a BIT mask
which represents the combination of
different parameters which can be used for
ECMP hashing
ECMP_HASH_SIP ------ 0x00000001
- Include Source IP for ECMP hash
ECMP_HASH_DIP ------ 0x00000002
- Include destination IP for ECMP hash
ECMP_HASH_PROT ------ 0x00000004
- Include layer3 protocol for ECMP hash
ECMP_HASH_TCP ------ 0x00000008
- Enable L4 source/destination port hash if protocl is TCP
ECMP_HASH_UDP ------ 0x00000010
- Enable L4 source/destination port hash if protocl is UDP
ECMP_HASH_L4SRC------ 0x00000020
- Include L4 source port for ECMP hash
ECMP_HASH_L4DST------ 0x00000040
- Include L4 destination port for ECMP hash
"
::= { ipStaticRouteCfg 13}
ipStaticRouteCurHealthcheck OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gateway healthcheck functionality"
::= { ipStaticRouteCfg 16}
ipStaticRouteNewHealthcheck OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Gateway healthcheck functionality"
::= { ipStaticRouteCfg 17}
ipNewCfgStaticRouteEntry OBJECT-TYPE
SYNTAX IpNewCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static IP route table"
INDEX { ipNewCfgStaticRouteIndx }
::= { ipNewCfgStaticRouteTable 1 }
IpNewCfgStaticRouteEntry ::= SEQUENCE {
ipNewCfgStaticRouteIndx Integer32,
ipNewCfgStaticRouteDestIp IpAddress,
ipNewCfgStaticRouteMask IpAddress,
ipNewCfgStaticRouteGateway IpAddress,
ipNewCfgStaticRouteAction INTEGER,
ipNewCfgStaticRouteInterface Integer32
}
ipNewCfgStaticRouteIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the static routing table."
::= { ipNewCfgStaticRouteEntry 1}
ipNewCfgStaticRouteDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { ipNewCfgStaticRouteEntry 2}
ipNewCfgStaticRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The subnet mask of this route."
::= { ipNewCfgStaticRouteEntry 3}
ipNewCfgStaticRouteGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address of the gateway for this route."
::= { ipNewCfgStaticRouteEntry 4}
ipNewCfgStaticRouteAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row."
::= { ipNewCfgStaticRouteEntry 5 }
ipNewCfgStaticRouteInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP interface of this route. The IP address of the specified
interface shall be use as source IP when performs routing."
::= { ipNewCfgStaticRouteEntry 6 }
-- RIP version 2 Configuration
ripCurCfgIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF RipCurCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of RIP on IP interface in the current configuration block."
::= { rip2Cfg 1 }
ripCurCfgIntfEntry OBJECT-TYPE
SYNTAX RipCurCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about RIP on IP interface."
INDEX { ripCurCfgIntfIndex }
::= { ripCurCfgIntfTable 1 }
RipCurCfgIntfEntry ::= SEQUENCE {
ripCurCfgIntfIndex Integer32,
ripCurCfgIntfVersion INTEGER,
ripCurCfgIntfSupply INTEGER,
ripCurCfgIntfListen INTEGER,
ripCurCfgIntfTrigUpdate INTEGER,
ripCurCfgIntfMcastUpdate INTEGER,
ripCurCfgIntfPoisonReverse INTEGER,
ripCurCfgIntfState INTEGER,
ripCurCfgIntfMetric INTEGER,
ripCurCfgIntfAuth INTEGER,
ripCurCfgIntfKey DisplayString,
ripCurCfgIntfDefault INTEGER,
ripCurCfgIntfSplitHorizon INTEGER
}
ripCurCfgIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the RIP information is related."
::= { ripCurCfgIntfEntry 1}
ripCurCfgIntfVersion OBJECT-TYPE
SYNTAX INTEGER {
ripVersion1(1),
ripVersion2(2),
ripVersionBoth(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP version."
::= { ripCurCfgIntfEntry 2 }
ripCurCfgIntfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable RIP protocol."
::= { ripCurCfgIntfEntry 3 }
ripCurCfgIntfListen OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable listening to route updates."
::= { ripCurCfgIntfEntry 4 }
ripCurCfgIntfTrigUpdate OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable triggered updates."
::= { ripCurCfgIntfEntry 6 }
ripCurCfgIntfMcastUpdate OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable multicast updates."
::= { ripCurCfgIntfEntry 7 }
ripCurCfgIntfPoisonReverse OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP poison reverse."
::= { ripCurCfgIntfEntry 8 }
ripCurCfgIntfSupply OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable supplying route updates."
::= { ripCurCfgIntfEntry 9 }
ripCurCfgIntfMetric OBJECT-TYPE
SYNTAX INTEGER (1..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP route metric for this interface."
::= { ripCurCfgIntfEntry 10 }
ripCurCfgIntfAuth OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of Authentication used on this interface."
::= { ripCurCfgIntfEntry 11 }
ripCurCfgIntfKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP update authentication password."
::= { ripCurCfgIntfEntry 12 }
ripCurCfgIntfDefault OBJECT-TYPE
SYNTAX INTEGER {
both(1),
listen(2),
supply(3),
none(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies what RIP does with default routes."
::= { ripCurCfgIntfEntry 13 }
ripCurCfgIntfSplitHorizon OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP split horizon."
::= {ripCurCfgIntfEntry 14 }
ripNewCfgIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF RipNewCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of RIP on IP interface in the new configuration block."
::= { rip2Cfg 2 }
ripNewCfgIntfEntry OBJECT-TYPE
SYNTAX RipNewCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about RIP on IP interface."
INDEX { ripNewCfgIntfIndex }
::= { ripNewCfgIntfTable 1 }
RipNewCfgIntfEntry ::= SEQUENCE {
ripNewCfgIntfIndex Integer32,
ripNewCfgIntfVersion INTEGER,
ripNewCfgIntfSupply INTEGER,
ripNewCfgIntfListen INTEGER,
ripNewCfgIntfTrigUpdate INTEGER,
ripNewCfgIntfMcastUpdate INTEGER,
ripNewCfgIntfPoisonReverse INTEGER,
ripNewCfgIntfState INTEGER,
ripNewCfgIntfMetric INTEGER,
ripNewCfgIntfAuth INTEGER,
ripNewCfgIntfKey DisplayString,
ripNewCfgIntfDefault INTEGER,
ripNewCfgIntfSplitHorizon INTEGER
}
ripNewCfgIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the RIP information is related."
::= { ripNewCfgIntfEntry 1}
ripNewCfgIntfVersion OBJECT-TYPE
SYNTAX INTEGER {
ripVersion1(1),
ripVersion2(2),
ripVersionBoth(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RIP version."
::= { ripNewCfgIntfEntry 2 }
ripNewCfgIntfSupply OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable supplying route updates."
::= { ripNewCfgIntfEntry 3 }
ripNewCfgIntfListen OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable listening to route updates."
::= { ripNewCfgIntfEntry 4 }
ripNewCfgIntfTrigUpdate OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable triggered updates."
::= { ripNewCfgIntfEntry 6 }
ripNewCfgIntfMcastUpdate OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable multicast updates."
::= { ripNewCfgIntfEntry 7 }
ripNewCfgIntfPoisonReverse OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RIP poison reverse."
::= { ripNewCfgIntfEntry 8 }
ripNewCfgIntfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable RIP protocol."
::= { ripNewCfgIntfEntry 9 }
ripNewCfgIntfMetric OBJECT-TYPE
SYNTAX INTEGER (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RIP route metric for this interface."
::= { ripNewCfgIntfEntry 10 }
ripNewCfgIntfAuth OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Authentication used on this interface."
::= { ripNewCfgIntfEntry 11 }
ripNewCfgIntfKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RIP update authentication password."
::= { ripNewCfgIntfEntry 12 }
ripNewCfgIntfDefault OBJECT-TYPE
SYNTAX INTEGER {
both(1),
listen(2),
supply(3),
none(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies what RIP does with default routes. The default routes
action could be set to listen/supply/both/none."
::= { ripNewCfgIntfEntry 13 }
ripNewCfgIntfSplitHorizon OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RIP split horizon."
::= { ripNewCfgIntfEntry 14 }
ripGeneral OBJECT IDENTIFIER ::= { rip2Cfg 3 }
rip2CurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP global state."
::= { ripGeneral 1 }
rip2NewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Globally turn RIP on or off."
::= { ripGeneral 2 }
rip2CurCfgUpdatePeriod OBJECT-TYPE
SYNTAX INTEGER (1..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Update Period in seconds."
::= { ripGeneral 3 }
rip2NewCfgUpdatePeriod OBJECT-TYPE
SYNTAX INTEGER (1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Update Period in seconds."
::= { ripGeneral 4 }
ripRouteRedistribution OBJECT IDENTIFIER ::= { rip2Cfg 4 }
ripRedistributeStatic OBJECT IDENTIFIER ::= { ripRouteRedistribution 1 }
ripCurCfgStaticMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric to be assigned to static routes.
A value of 0 indicates none."
::= { ripRedistributeStatic 1 }
ripNewCfgStaticMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The metric to be assigned to static routes.
A value of 0 indicates none."
::= { ripRedistributeStatic 2 }
ripCurCfgStaticOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeStatic 5 }
ripNewCfgStaticOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeStatic 6 }
ripNewCfgStaticAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read, 0 is returned."
::= { ripRedistributeStatic 7 }
ripNewCfgStaticRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { ripRedistributeStatic 8 }
ripRedistributeEbgp OBJECT IDENTIFIER ::= { ripRouteRedistribution 2 }
ripCurCfgEbgpMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The export metric to be assigned to External BGP routes.
A value of 0 indicates none."
::= { ripRedistributeEbgp 1 }
ripNewCfgEbgpMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The export metric to be assigned to External BGP routes.
A value of 0 indicates none."
::= { ripRedistributeEbgp 2 }
ripCurCfgEbgpOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeEbgp 5 }
ripNewCfgEbgpOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeEbgp 6 }
ripNewCfgEbgpAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read, 0 is returned."
::= { ripRedistributeEbgp 7 }
ripNewCfgEbgpRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { ripRedistributeEbgp 8 }
ripRedistributeIbgp OBJECT IDENTIFIER ::= { ripRouteRedistribution 3 }
ripCurCfgIbgpMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The export metric for Internal BGP routes.
A value of 0 indicates none."
::= { ripRedistributeIbgp 1 }
ripNewCfgIbgpMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The export metric for Internal BGP routes.
A value of 0 indicates none."
::= { ripRedistributeIbgp 2 }
ripCurCfgIbgpOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeIbgp 5 }
ripNewCfgIbgpOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeIbgp 6 }
ripNewCfgIbgpAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read, 0 is returned."
::= { ripRedistributeIbgp 7 }
ripNewCfgIbgpRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { ripRedistributeIbgp 8 }
ripRedistributeFixed OBJECT IDENTIFIER ::= { ripRouteRedistribution 4 }
ripCurCfgFixedMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The export metric for fixed routes. A value of 0 indicates none"
::= { ripRedistributeFixed 1 }
ripNewCfgFixedMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The export metric for fixed routes. A value of 0 indicates none"
::= { ripRedistributeFixed 2 }
ripCurCfgFixedOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeFixed 5 }
ripNewCfgFixedOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeFixed 6 }
ripNewCfgFixedAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read, 0 is returned."
::= { ripRedistributeFixed 7 }
ripNewCfgFixedRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { ripRedistributeFixed 8 }
ripRedistributeOspf OBJECT IDENTIFIER ::= { ripRouteRedistribution 5 }
ripCurCfgOspfMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The export metric for RIP routes. A value of 0 indicates none"
::= { ripRedistributeOspf 1 }
ripNewCfgOspfMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The export metric for RIP routes. A value of 0 indicates none"
::= { ripRedistributeOspf 2 }
ripCurCfgOspfOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeOspf 5 }
ripNewCfgOspfOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeOspf 6 }
ripNewCfgOspfAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read, 0 is returned."
::= { ripRedistributeOspf 7 }
ripNewCfgOspfRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { ripRedistributeOspf 8 }
ripRedistributeEospf OBJECT IDENTIFIER ::= { ripRouteRedistribution 6 }
ripCurCfgEospfMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The export metric for RIP routes. A value of 0 indicates none"
::= { ripRedistributeEospf 1 }
ripNewCfgEospfMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The export metric for RIP routes. A value of 0 indicates none"
::= { ripRedistributeEospf 2 }
ripCurCfgEospfOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeEospf 5 }
ripNewCfgEospfOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ripRedistributeEospf 6 }
ripNewCfgEospfAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read, 0 is returned."
::= { ripRedistributeEospf 7 }
ripNewCfgEospfRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { ripRedistributeEospf 8 }
-- IP Forwarding Configuration
ipFwdGeneralCfg OBJECT IDENTIFIER ::= {ipForwardCfg 1 }
ipFwdCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP forwarding global state."
::= { ipFwdGeneralCfg 1 }
ipFwdNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP forwarding global state."
::= { ipFwdGeneralCfg 2 }
ipFwdCurCfgDirectedBcast OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable forwarding directed broadcasts."
::= { ipFwdGeneralCfg 3 }
ipFwdNewCfgDirectedBcast OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable forwarding directed broadcasts."
::= { ipFwdGeneralCfg 4 }
ipFwdCurCfgICMP6Redirect OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable ICMPv6 redirects."
::= { ipFwdGeneralCfg 7 }
ipFwdNewCfgICMP6Redirect OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable ICMPv6 redirects."
::= { ipFwdGeneralCfg 8 }
--
-- ARP configuration
--
arpCurCfgReARPPeriod OBJECT-TYPE
SYNTAX INTEGER (2..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Re-ARP Period in seconds."
::= { arpCfg 1 }
arpNewCfgReARPPeriod OBJECT-TYPE
SYNTAX INTEGER (2..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Re-ARP Period in seconds."
::= { arpCfg 2 }
--
-- IP Bootp Configration
--
ipCurCfgBootpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of BOOTP server."
::= { ipBootpCfg 1 }
ipNewCfgBootpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of BOOTP server."
::= { ipBootpCfg 2 }
ipCurCfgBootpAddr2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of second BOOTP server."
::= { ipBootpCfg 3 }
ipNewCfgBootpAddr2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of second BOOTP server."
::= { ipBootpCfg 4 }
ipCurCfgBootpState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of BOOTP relay."
::= { ipBootpCfg 5 }
ipNewCfgBootpState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of BOOTP relay."
::= { ipBootpCfg 6 }
ipCurCfgBootpGlobalServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgBootpGlobalServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of global BOOTP server addresses"
::= { ipBootpCfg 20 }
ipCurCfgBootpGlobalServerEntry OBJECT-TYPE
SYNTAX IpCurCfgBootpGlobalServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the ipCurCfgBootpGlobalServerAddrTable"
INDEX { ipCurCfgBootpGlobalServerIndex }
::= { ipCurCfgBootpGlobalServerTable 1 }
IpCurCfgBootpGlobalServerEntry ::= SEQUENCE {
ipCurCfgBootpGlobalServerIndex Integer32,
ipCurCfgBootpGlobalServerAddress IpAddress
}
ipCurCfgBootpGlobalServerIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of ipCurCfgBootpGlobalServerTable"
::= { ipCurCfgBootpGlobalServerEntry 1 }
ipCurCfgBootpGlobalServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current global server IP."
::= { ipCurCfgBootpGlobalServerEntry 2 }
ipNewCfgBootpGlobalServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgBootpGlobalServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of global BOOTP server addresses"
::= { ipBootpCfg 21 }
ipNewCfgBootpGlobalServerEntry OBJECT-TYPE
SYNTAX IpNewCfgBootpGlobalServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the ipNewCfgBootpGlobalServerAddrTable"
INDEX { ipNewCfgBootpGlobalServerIndex }
::= { ipNewCfgBootpGlobalServerTable 1 }
IpNewCfgBootpGlobalServerEntry ::= SEQUENCE {
ipNewCfgBootpGlobalServerIndex Integer32,
ipNewCfgBootpGlobalServerAddress IpAddress
}
ipNewCfgBootpGlobalServerIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of ipCurCfgBootpGlobalServerTable"
::= { ipNewCfgBootpGlobalServerEntry 1 }
ipNewCfgBootpGlobalServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current global server IP."
::= { ipNewCfgBootpGlobalServerEntry 2 }
ipCurCfgBootpBcastDomainTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgBootpBcastDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of broadcast domain settings"
::= { ipBootpCfg 22 }
ipCurCfgBootpBcastDomainEntry OBJECT-TYPE
SYNTAX IpCurCfgBootpBcastDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the broadcast domain table"
INDEX { ipCurCfgBootpBcastDomainIndex }
::= { ipCurCfgBootpBcastDomainTable 1 }
IpCurCfgBootpBcastDomainEntry ::= SEQUENCE {
ipCurCfgBootpBcastDomainIndex Integer32,
ipCurCfgBootpBcastDomainVlan Integer32,
ipCurCfgBootpBcastDomainEnable INTEGER
}
ipCurCfgBootpBcastDomainIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the broadcast domain entry"
::= { ipCurCfgBootpBcastDomainEntry 1 }
ipCurCfgBootpBcastDomainVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN of the broadcast domain entry"
::= { ipCurCfgBootpBcastDomainEntry 2 }
ipCurCfgBootpBcastDomainEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the broadcast domain entry"
::= { ipCurCfgBootpBcastDomainEntry 3 }
ipNewCfgBootpBcastDomainTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgBootpBcastDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of broadcast domain settings"
::= { ipBootpCfg 23 }
ipNewCfgBootpBcastDomainEntry OBJECT-TYPE
SYNTAX IpNewCfgBootpBcastDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the broadcast domain table"
INDEX { ipNewCfgBootpBcastDomainIndex }
::= { ipNewCfgBootpBcastDomainTable 1 }
IpNewCfgBootpBcastDomainEntry ::= SEQUENCE {
ipNewCfgBootpBcastDomainIndex Integer32,
ipNewCfgBootpBcastDomainVlan Integer32,
ipNewCfgBootpBcastDomainEnable INTEGER,
ipNewCfgBootpBcastDomainAction INTEGER
}
ipNewCfgBootpBcastDomainIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the broadcast domain entry"
::= { ipNewCfgBootpBcastDomainEntry 1 }
ipNewCfgBootpBcastDomainVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN of the broadcast domain entry"
::= { ipNewCfgBootpBcastDomainEntry 2 }
ipNewCfgBootpBcastDomainEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of the broadcast domain entry"
::= { ipNewCfgBootpBcastDomainEntry 3 }
ipNewCfgBootpBcastDomainAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the broadcast domain is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of broadcast domain."
::= { ipNewCfgBootpBcastDomainEntry 4 }
ipCurCfgBootpBcastDomainServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgBootpBcastDomainServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of broadcast domain servers"
::= { ipBootpCfg 24 }
ipCurCfgBootpBcastDomainServerEntry OBJECT-TYPE
SYNTAX IpCurCfgBootpBcastDomainServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the broadcast domain server table"
INDEX { ipCurCfgBootpBcastDomainBDIndex,
ipCurCfgBootpBcastDomainServIndex }
::= { ipCurCfgBootpBcastDomainServerTable 1 }
IpCurCfgBootpBcastDomainServerEntry ::= SEQUENCE {
ipCurCfgBootpBcastDomainBDIndex Integer32,
ipCurCfgBootpBcastDomainServIndex Integer32,
ipCurCfgBootpBcastDomainServerIP IpAddress
}
ipCurCfgBootpBcastDomainBDIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the broadcast domain entry in the server table"
::= { ipCurCfgBootpBcastDomainServerEntry 1 }
ipCurCfgBootpBcastDomainServIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the server in the server table"
::= { ipCurCfgBootpBcastDomainServerEntry 2 }
ipCurCfgBootpBcastDomainServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current broadcast domain server IP."
::= { ipCurCfgBootpBcastDomainServerEntry 3 }
ipNewCfgBootpBcastDomainServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgBootpBcastDomainServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of broadcast domain servers"
::= { ipBootpCfg 25 }
ipNewCfgBootpBcastDomainServerEntry OBJECT-TYPE
SYNTAX IpNewCfgBootpBcastDomainServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the broadcast domain server table"
INDEX { ipNewCfgBootpBcastDomainBDIndex,
ipNewCfgBootpBcastDomainServIndex }
::= { ipNewCfgBootpBcastDomainServerTable 1 }
IpNewCfgBootpBcastDomainServerEntry ::= SEQUENCE {
ipNewCfgBootpBcastDomainBDIndex Integer32,
ipNewCfgBootpBcastDomainServIndex Integer32,
ipNewCfgBootpBcastDomainServerIP IpAddress
}
ipNewCfgBootpBcastDomainBDIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the broadcast domain entry in the server table"
::= { ipNewCfgBootpBcastDomainServerEntry 1 }
ipNewCfgBootpBcastDomainServIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the server in the server table"
::= { ipNewCfgBootpBcastDomainServerEntry 2 }
ipNewCfgBootpBcastDomainServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current broadcast domain server IP."
::= { ipNewCfgBootpBcastDomainServerEntry 3 }
ipCurCfgBootpOpt82State OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Bootp relay option 82"
::= { ipBootpCfg 26 }
ipNewCfgBootpOpt82State OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the stare of Bootp relay option 82"
::= { ipBootpCfg 27 }
ipCurCfgBootpOpt82Policy OBJECT-TYPE
SYNTAX INTEGER {
replace(0),
drop(1),
keep(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The policy of Bootp relay option 82"
::= { ipBootpCfg 28 }
ipNewCfgBootpOpt82Policy OBJECT-TYPE
SYNTAX INTEGER {
replace(0),
drop(1),
keep(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the policy of Bootp relay option 82"
::= { ipBootpCfg 29 }
-- VRRP (Virtual Router Redundantcy Protocol) Group
vrrpGeneral OBJECT IDENTIFIER ::= { vrrpCfg 1 }
vrrpCurCfgGenState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable VRRP operation globally."
::= { vrrpGeneral 1 }
vrrpNewCfgGenState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable VRRP operation globally."
::= { vrrpGeneral 2 }
vrrpCurCfgGenTckVirtRtrInc OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The increment of VRRP virtual router priority. The priority is
adjusted by tracking the state of other virtual routers."
::= { vrrpGeneral 3 }
vrrpNewCfgGenTckVirtRtrInc OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The increment of VRRP virtual router priority. The priority is
adjusted by tracking the state of other virtual routers."
::= { vrrpGeneral 4 }
vrrpCurCfgGenTckIpIntfInc OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The increment of VRRP virtual router priority. The priority is
adjusted by tracking the state of other router interfaces."
::= { vrrpGeneral 5 }
vrrpNewCfgGenTckIpIntfInc OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The increment of VRRP virtual router priority. The priority is
adjusted by tracking the state of other router interfaces."
::= { vrrpGeneral 6 }
vrrpCurCfgGenTckVlanPortInc OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The increment of VRRP virtual router priority. The priority is
adjusted by tracking the port state of ports that belongs to the
same virtual LAN as the virtual router."
::= { vrrpGeneral 7 }
vrrpNewCfgGenTckVlanPortInc OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The increment of VRRP virtual router priority. The priority is
adjusted by tracking the port state of ports that belongs to the
same virtual LAN as the virtual router."
::= { vrrpGeneral 8 }
vrrpCurCfgGenHoldoff OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time for VRRP virtual router to hold before it
begins to change state to backup or master state."
::= { vrrpGeneral 19 }
vrrpNewCfgGenHoldoff OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time for VRRP virtual router to hold before it
begins to change state to backup or master state."
::= { vrrpGeneral 20 }
vrrpVirtRtrTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in VRRP virtual router table."
::= { vrrpCfg 2 }
vrrpCurCfgVirtRtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpCurCfgVirtRtrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VRRP virtual routers in the current configuration block."
::= { vrrpCfg 3 }
vrrpCurCfgVirtRtrTableEntry OBJECT-TYPE
SYNTAX VrrpCurCfgVirtRtrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a VRRP virtual router."
INDEX { vrrpCurCfgVirtRtrIndx }
::= { vrrpCurCfgVirtRtrTable 1 }
VrrpCurCfgVirtRtrTableEntry ::= SEQUENCE {
vrrpCurCfgVirtRtrIndx Integer32,
vrrpCurCfgVirtRtrID INTEGER,
vrrpCurCfgVirtRtrAddr IpAddress,
vrrpCurCfgVirtRtrIfIndex Integer32,
vrrpCurCfgVirtRtrInterval INTEGER,
vrrpCurCfgVirtRtrPreDelay INTEGER,
vrrpCurCfgVirtRtrPriority INTEGER,
vrrpCurCfgVirtRtrPreempt INTEGER,
vrrpCurCfgVirtRtrTckVirtRtr INTEGER,
vrrpCurCfgVirtRtrTckIpIntf INTEGER,
vrrpCurCfgVirtRtrTckVlanPort INTEGER,
vrrpCurCfgVirtRtrState INTEGER
, vrrpCurCfgVirtRtrFastAdvertisement INTEGER
}
vrrpCurCfgVirtRtrIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router table index."
::= { vrrpCurCfgVirtRtrTableEntry 1 }
vrrpCurCfgVirtRtrID OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router identifier."
::= { vrrpCurCfgVirtRtrTableEntry 2 }
vrrpCurCfgVirtRtrAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router IP address."
::= { vrrpCurCfgVirtRtrTableEntry 3 }
vrrpCurCfgVirtRtrIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IfIndex that the VRRP virtual router is representing."
::= { vrrpCurCfgVirtRtrTableEntry 4 }
vrrpCurCfgVirtRtrInterval OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval between VRRP advertisements in seconds.
When FAST_ADVERTISEMENT is enabled, this object indicates advertisement
interval in centi-seconds"
::= { vrrpCurCfgVirtRtrTableEntry 5 }
vrrpCurCfgVirtRtrPriority OBJECT-TYPE
SYNTAX INTEGER (1..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority value to be used by the specified VRRP virtual routers."
::= { vrrpCurCfgVirtRtrTableEntry 6 }
vrrpCurCfgVirtRtrPreempt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit preemption"
::= { vrrpCurCfgVirtRtrTableEntry 7 }
vrrpCurCfgVirtRtrTckVirtRtr OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable tracking other virtual routers for priority
adjustment. The priority increment is defined
in vrrpCurCfgGenTckVirtRtrInc."
::= { vrrpCurCfgVirtRtrTableEntry 9 }
vrrpCurCfgVirtRtrTckIpIntf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable tracking other router interfaces for
priority adjustment. The priority increment is defined
in vrrpCurCfgGenTckIpIntfInc."
::= { vrrpCurCfgVirtRtrTableEntry 10 }
vrrpCurCfgVirtRtrTckVlanPort OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable tracking port state of VLAN ports
for priority adjustment. The priority increment is
defined in vrrpCurCfgGenTckVlanPortInc."
::= { vrrpCurCfgVirtRtrTableEntry 15 }
vrrpCurCfgVirtRtrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the VRRP virtual router."
::= { vrrpCurCfgVirtRtrTableEntry 16 }
vrrpCurCfgVirtRtrFastAdvertisement OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the status of FAST_ADVERTISEMENT.
When FAST_ADVERTISEMENT is enabled,
- New message type FAST-ADVERTISEMENT(2) will be used in the
VRRP advertisements
- Can interop only with another FAST_ADVERTISEMENT enabled router
- VRRP advertisement interval will be sent in units of centi-seconds
- Timers will be running with centi-second granularity"
::= { vrrpCurCfgVirtRtrTableEntry 17 }
vrrpCurCfgVirtRtrPreDelay OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The pre-emptive delay interval in seconds."
::= { vrrpCurCfgVirtRtrTableEntry 18 }
vrrpNewCfgVirtRtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpNewCfgVirtRtrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VRRP virtual routers in the current configuration block."
::= { vrrpCfg 4 }
vrrpNewCfgVirtRtrTableEntry OBJECT-TYPE
SYNTAX VrrpNewCfgVirtRtrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a VRRP virtual router."
INDEX { vrrpNewCfgVirtRtrIndx }
::= { vrrpNewCfgVirtRtrTable 1 }
VrrpNewCfgVirtRtrTableEntry ::= SEQUENCE {
vrrpNewCfgVirtRtrIndx Integer32,
vrrpNewCfgVirtRtrID INTEGER,
vrrpNewCfgVirtRtrAddr IpAddress,
vrrpNewCfgVirtRtrIfIndex Integer32,
vrrpNewCfgVirtRtrInterval INTEGER,
vrrpNewCfgVirtRtrPreDelay INTEGER,
vrrpNewCfgVirtRtrPriority INTEGER,
vrrpNewCfgVirtRtrPreempt INTEGER,
vrrpNewCfgVirtRtrDelete INTEGER,
vrrpNewCfgVirtRtrTckVirtRtr INTEGER,
vrrpNewCfgVirtRtrTckIpIntf INTEGER,
vrrpNewCfgVirtRtrTckVlanPort INTEGER,
vrrpNewCfgVirtRtrState INTEGER
, vrrpNewCfgVirtRtrFastAdvertisement INTEGER
}
vrrpNewCfgVirtRtrIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router table index."
::= { vrrpNewCfgVirtRtrTableEntry 1 }
vrrpNewCfgVirtRtrID OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VRRP virtual router identifier."
::= { vrrpNewCfgVirtRtrTableEntry 2 }
vrrpNewCfgVirtRtrAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VRRP virtual router IP address."
::= { vrrpNewCfgVirtRtrTableEntry 3 }
vrrpNewCfgVirtRtrIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IfIndex that the VRRP virtual router is representing."
::= { vrrpNewCfgVirtRtrTableEntry 4 }
vrrpNewCfgVirtRtrInterval OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time interval between VRRP advertisements in seconds.
When FAST_ADVERTISEMENT is enabled, this object indicates advertisement
interval in centi-seconds"
::= { vrrpNewCfgVirtRtrTableEntry 5 }
vrrpNewCfgVirtRtrPriority OBJECT-TYPE
SYNTAX INTEGER (1..254)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority value to be used by the specified VRRP virtual router."
::= { vrrpNewCfgVirtRtrTableEntry 6 }
vrrpNewCfgVirtRtrPreempt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit preemption"
::= { vrrpNewCfgVirtRtrTableEntry 7 }
vrrpNewCfgVirtRtrDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row."
::= { vrrpNewCfgVirtRtrTableEntry 8 }
vrrpNewCfgVirtRtrTckVirtRtr OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable tracking other virtual routers for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckVirtRtrInc."
::= { vrrpNewCfgVirtRtrTableEntry 10 }
vrrpNewCfgVirtRtrTckIpIntf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckIpIntfInc."
::= { vrrpNewCfgVirtRtrTableEntry 11 }
vrrpNewCfgVirtRtrTckVlanPort OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpNewCfgGenTckVlanPortInc."
::= { vrrpNewCfgVirtRtrTableEntry 12 }
vrrpNewCfgVirtRtrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the VRRP virtual router."
::= { vrrpNewCfgVirtRtrTableEntry 17 }
vrrpNewCfgVirtRtrFastAdvertisement OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object can be enabled if sub-second advertisement interval is required.
When FAST_ADVERTISEMENT is enabled,
- New message type FAST-ADVERTISEMENT(2) will be used in the
VRRP advertisements
- Can interop only with another FAST_ADVERTISEMENT enabled router
- VRRP advertisement interval will be sent in units of centi-seconds
- Timers will be running with centi-second granularity"
DEFVAL { disabled }
::= { vrrpNewCfgVirtRtrTableEntry 18 }
vrrpNewCfgVirtRtrPreDelay OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The pre-emptive delay interval in seconds."
::= { vrrpNewCfgVirtRtrTableEntry 19 }
-- VRRP Interface Table
vrrpIfTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in VRRP interface table."
::= { vrrpCfg 5 }
vrrpCurCfgIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpCurCfgIfTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VRRP interface in the current configuration block."
::= { vrrpCfg 6 }
vrrpCurCfgIfTableEntry OBJECT-TYPE
SYNTAX VrrpCurCfgIfTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a VRRP interface."
INDEX { vrrpCurCfgIfIndx }
::= { vrrpCurCfgIfTable 1 }
VrrpCurCfgIfTableEntry ::= SEQUENCE {
vrrpCurCfgIfIndx Integer32,
vrrpCurCfgIfAuthType INTEGER,
vrrpCurCfgIfPasswd DisplayString
}
vrrpCurCfgIfIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP interface index. This is eqivalent to IfIndex."
::= { vrrpCurCfgIfTableEntry 1 }
vrrpCurCfgIfAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
simple-text-password(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of authentication being used.
none(1) - no authentication
simple-text-password(2) - use password specified in
vrrpCurCfgIfPasswd for authentication."
::= { vrrpCurCfgIfTableEntry 2 }
vrrpCurCfgIfPasswd OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..7))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The password for authentication."
::= { vrrpCurCfgIfTableEntry 3 }
vrrpNewCfgIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpNewCfgIfTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VRRP interface in the current configuration block."
::= { vrrpCfg 7 }
vrrpNewCfgIfTableEntry OBJECT-TYPE
SYNTAX VrrpNewCfgIfTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a VRRP interface."
INDEX { vrrpNewCfgIfIndx }
::= { vrrpNewCfgIfTable 1 }
VrrpNewCfgIfTableEntry ::= SEQUENCE {
vrrpNewCfgIfIndx Integer32,
vrrpNewCfgIfAuthType INTEGER,
vrrpNewCfgIfPasswd DisplayString,
vrrpNewCfgIfDelete INTEGER
}
vrrpNewCfgIfIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP interface index. This is eqivalent to IfIndex."
::= { vrrpNewCfgIfTableEntry 1 }
vrrpNewCfgIfAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
simple-text-password(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Type of authentication being used.
none(1) - no authentication
simple-text-password(2) - use password specified in
vrrpNewCfgIfPasswd for authentication."
::= { vrrpNewCfgIfTableEntry 2 }
vrrpNewCfgIfPasswd OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The password for authentication."
::= { vrrpNewCfgIfTableEntry 3 }
vrrpNewCfgIfDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row."
::= { vrrpNewCfgIfTableEntry 4 }
-- Failover Virtual Router Groups
vrrpVirtRtrGrpTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in VRRP Group table."
::= { vrrpCfg 8 }
vrrpCurCfgVirtRtrGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpCurCfgVirtRtrGrpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VRRP virtual router group in the current configuration block."
::= { vrrpCfg 9 }
vrrpCurCfgVirtRtrGrpTableEntry OBJECT-TYPE
SYNTAX VrrpCurCfgVirtRtrGrpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a VRRP failover virtual router."
INDEX { vrrpCurCfgVirtRtrGrpIndx }
::= { vrrpCurCfgVirtRtrGrpTable 1 }
VrrpCurCfgVirtRtrGrpTableEntry ::= SEQUENCE {
vrrpCurCfgVirtRtrGrpIndx Integer32,
vrrpCurCfgVirtRtrGrpID INTEGER,
vrrpCurCfgVirtRtrGrpIfIndex Integer32,
vrrpCurCfgVirtRtrGrpInterval INTEGER,
vrrpCurCfgVirtRtrGrpPriority INTEGER,
vrrpCurCfgVirtRtrGrpPreempt INTEGER,
vrrpCurCfgVirtRtrGrpState INTEGER,
vrrpCurCfgVirtRtrGrpTckIpIntf INTEGER,
vrrpCurCfgVirtRtrGrpTckVlanPort INTEGER
,vrrpCurCfgVirtRtrGrpFastAdvertisement INTEGER
,vrrpCurCfgVirtRtrGrpPredelay INTEGER
}
vrrpCurCfgVirtRtrGrpIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router table index."
::= { vrrpCurCfgVirtRtrGrpTableEntry 1 }
vrrpCurCfgVirtRtrGrpID OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router identifier."
::= { vrrpCurCfgVirtRtrGrpTableEntry 2 }
vrrpCurCfgVirtRtrGrpIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IfIndex that the VRRP virtual router is representing."
::= { vrrpCurCfgVirtRtrGrpTableEntry 3 }
vrrpCurCfgVirtRtrGrpInterval OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time interval between VRRP advertisements in seconds."
::= { vrrpCurCfgVirtRtrGrpTableEntry 4 }
vrrpCurCfgVirtRtrGrpPriority OBJECT-TYPE
SYNTAX INTEGER (1..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority value to be used by the specified VRRP virtual routers."
::= { vrrpCurCfgVirtRtrGrpTableEntry 5 }
vrrpCurCfgVirtRtrGrpPreempt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit preemption"
::= { vrrpCurCfgVirtRtrGrpTableEntry 6 }
vrrpCurCfgVirtRtrGrpState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the VRRP virtual router."
::= { vrrpCurCfgVirtRtrGrpTableEntry 7 }
vrrpCurCfgVirtRtrGrpTckIpIntf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpCurCfgGenTckIpIntfInc."
::= { vrrpCurCfgVirtRtrGrpTableEntry 10 }
vrrpCurCfgVirtRtrGrpTckVlanPort OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpCurCfgGenTckVlanPortInc."
::= { vrrpCurCfgVirtRtrGrpTableEntry 11 }
vrrpCurCfgVirtRtrGrpFastAdvertisement OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the status of FAST_ADVERTISEMENT.
When FAST_ADVERTISEMENT is enabled,
- New message type FAST-ADVERTISEMENT(2) will be used in the
VRRP advertisements
- Can interop only with another FAST_ADVERTISEMENT enabled router
- VRRP advertisement interval will be sent in units of centi-seconds
- Timers will be running with centi-second granularity"
::= { vrrpCurCfgVirtRtrGrpTableEntry 16 }
vrrpCurCfgVirtRtrGrpPredelay OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The pre-emptive delay interval in seconds for specified VRRP virtual routers."
::= { vrrpCurCfgVirtRtrGrpTableEntry 21 }
vrrpNewCfgVirtRtrGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpNewCfgVirtRtrGrpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VRRP virtual router group in the new configuration block."
::= { vrrpCfg 10 }
vrrpNewCfgVirtRtrGrpTableEntry OBJECT-TYPE
SYNTAX VrrpNewCfgVirtRtrGrpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a VRRP failover virtual router."
INDEX { vrrpNewCfgVirtRtrGrpIndx }
::= { vrrpNewCfgVirtRtrGrpTable 1 }
VrrpNewCfgVirtRtrGrpTableEntry ::= SEQUENCE {
vrrpNewCfgVirtRtrGrpIndx Integer32,
vrrpNewCfgVirtRtrGrpID INTEGER,
vrrpNewCfgVirtRtrGrpIfIndex Integer32,
vrrpNewCfgVirtRtrGrpInterval INTEGER,
vrrpNewCfgVirtRtrGrpPriority INTEGER,
vrrpNewCfgVirtRtrGrpPreempt INTEGER,
vrrpNewCfgVirtRtrGrpState INTEGER,
vrrpNewCfgVirtRtrGrpDelete INTEGER,
vrrpNewCfgVirtRtrGrpTckIpIntf INTEGER,
vrrpNewCfgVirtRtrGrpTckVlanPort INTEGER
,vrrpNewCfgVirtRtrGrpFastAdvertisement INTEGER
,vrrpNewCfgVirtRtrGrpPredelay INTEGER
}
vrrpNewCfgVirtRtrGrpIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router table index."
::= { vrrpNewCfgVirtRtrGrpTableEntry 1 }
vrrpNewCfgVirtRtrGrpID OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VRRP virtual router identifier."
::= { vrrpNewCfgVirtRtrGrpTableEntry 2 }
vrrpNewCfgVirtRtrGrpIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IfIndex that the VRRP virtual router is representing."
::= { vrrpNewCfgVirtRtrGrpTableEntry 3 }
vrrpNewCfgVirtRtrGrpInterval OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time interval between VRRP advertisements in seconds."
::= { vrrpNewCfgVirtRtrGrpTableEntry 4 }
vrrpNewCfgVirtRtrGrpPriority OBJECT-TYPE
SYNTAX INTEGER (1..254)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority value to be used by the specified VRRP virtual router."
::= { vrrpNewCfgVirtRtrGrpTableEntry 5 }
vrrpNewCfgVirtRtrGrpPreempt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit preemption"
::= { vrrpNewCfgVirtRtrGrpTableEntry 6 }
vrrpNewCfgVirtRtrGrpState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the VRRP virtual router."
::= { vrrpNewCfgVirtRtrGrpTableEntry 7 }
vrrpNewCfgVirtRtrGrpDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row."
::= { vrrpNewCfgVirtRtrGrpTableEntry 8 }
vrrpNewCfgVirtRtrGrpTckIpIntf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckIpIntfInc."
::= { vrrpNewCfgVirtRtrGrpTableEntry 11 }
vrrpNewCfgVirtRtrGrpTckVlanPort OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpNewCfgGenTckVlanPortInc."
::= { vrrpNewCfgVirtRtrGrpTableEntry 12 }
vrrpNewCfgVirtRtrGrpFastAdvertisement OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object can be enabled if sub-second advertisement interval is required.
When FAST_ADVERTISEMENT is enabled,
- New message type FAST-ADVERTISEMENT(2) will be used in the
VRRP advertisements
- Can interop only with another FAST_ADVERTISEMENT enabled router
- VRRP advertisement interval will be sent in units of centi-seconds
- Timers will be running with centi-second granularity"
DEFVAL { disabled }
::= {vrrpNewCfgVirtRtrGrpTableEntry 17 }
vrrpNewCfgVirtRtrGrpPredelay OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The pre-emptive delay interval in seconds."
::= { vrrpNewCfgVirtRtrGrpTableEntry 21 }
-- Domain Name Server Configuration
dnsCurCfgPrimaryIpAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DNS primary IP address in the current configuration block."
::= { dnsCfg 1 }
dnsNewCfgPrimaryIpAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DNS primary IP address in the new configuration block."
::= { dnsCfg 2 }
dnsCurCfgSecondaryIpAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DNS primary IP address in the current configuration block."
::= { dnsCfg 3 }
dnsNewCfgSecondaryIpAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DNS primary IP address in the new configuration block."
::= { dnsCfg 4 }
dnsCurCfgDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..191))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DNS doamin name in the current configuration block."
::= { dnsCfg 5 }
dnsNewCfgDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..191))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DNS doamin name in the new configuration block."
::= { dnsCfg 6 }
dnsNewCfgFirstRequestAddr OBJECT-TYPE
SYNTAX INTEGER{
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of the first request to dns"
::= { dnsCfg 9 }
dnsCurCfgFirstRequestAddr OBJECT-TYPE
SYNTAX INTEGER{
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of the first request to dns"
::= { dnsCfg 10}
dnsCurCfgPriServerPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgtb(2),
mgta(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Choose the port that the primary server is connected to."
::= { dnsCfg 11 }
dnsNewCfgPriServerPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgtb(2),
mgta(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Choose the port that the primary server is connected to."
::= { dnsCfg 12 }
dnsCurCfgSecServerPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgtb(2),
mgta(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Choose the port that the secondary server is connected to."
::= { dnsCfg 13 }
dnsNewCfgSecServerPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgtb(2),
mgta(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Choose the port that the secondary server is connected to."
::= { dnsCfg 14 }
--
-- IP network filter configuration
--
ipNwfTableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the IP network filter table."
::= { ipNwfCfg 1 }
ipCurCfgNwfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgNwfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP network filter in the current configuration block."
::= { ipNwfCfg 2 }
ipCurCfgNwfEntry OBJECT-TYPE
SYNTAX IpCurCfgNwfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IP network filter."
INDEX { ipCurCfgNwfIndex }
::= { ipCurCfgNwfTable 1 }
IpCurCfgNwfEntry ::= SEQUENCE {
ipCurCfgNwfIndex Integer32,
ipCurCfgNwfAddr IpAddress,
ipCurCfgNwfMask IpAddress,
ipCurCfgNwfState INTEGER
}
ipCurCfgNwfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The netowrk filter number for which the NWF is related."
::= { ipCurCfgNwfEntry 1}
ipCurCfgNwfAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the network filter."
::= { ipCurCfgNwfEntry 2 }
ipCurCfgNwfMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP network filter mask."
::= { ipCurCfgNwfEntry 3 }
ipCurCfgNwfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the network filter."
::= { ipCurCfgNwfEntry 4 }
ipNewCfgNwfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgNwfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP network filter in the current configuration block."
::= { ipNwfCfg 3 }
ipNewCfgNwfEntry OBJECT-TYPE
SYNTAX IpNewCfgNwfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IP network filter."
INDEX { ipNewCfgNwfIndex }
::= { ipNewCfgNwfTable 1 }
IpNewCfgNwfEntry ::= SEQUENCE {
ipNewCfgNwfIndex Integer32,
ipNewCfgNwfAddr IpAddress,
ipNewCfgNwfMask IpAddress,
ipNewCfgNwfState INTEGER,
ipNewCfgNwfDelete INTEGER
}
ipNewCfgNwfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The netowrk filter number for which the NWF is related."
::= { ipNewCfgNwfEntry 1}
ipNewCfgNwfAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address of the network filter."
::= { ipNewCfgNwfEntry 2 }
ipNewCfgNwfMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP network filter mask."
::= { ipNewCfgNwfEntry 3 }
ipNewCfgNwfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the network filter."
::= { ipNewCfgNwfEntry 4 }
ipNewCfgNwfDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { ipNewCfgNwfEntry 5 }
--
-- IP route map configuration
--
ipRmapTableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the IP route map table."
::= { ipRmapCfg 1 }
ipCurCfgRmapTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgRmapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP route map in the current configuration block."
::= { ipRmapCfg 2 }
ipCurCfgRmapEntry OBJECT-TYPE
SYNTAX IpCurCfgRmapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IP route map."
INDEX { ipCurCfgRmapIndex }
::= { ipCurCfgRmapTable 1 }
IpCurCfgRmapEntry ::= SEQUENCE {
ipCurCfgRmapIndex Integer32,
ipCurCfgRmapLp Unsigned32,
ipCurCfgRmapMetric Unsigned32,
ipCurCfgRmapPrec INTEGER,
ipCurCfgRmapWeight INTEGER,
ipCurCfgRmapAp DisplayString,
ipCurCfgRmapMetricType INTEGER,
ipCurCfgRmapNexthop INTEGER,
ipCurCfgRmapState INTEGER
}
ipCurCfgRmapIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route map number for which the RMAP is related."
::= { ipCurCfgRmapEntry 1}
ipCurCfgRmapLp OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local-preference of the route map. 4294967295 means none"
::= { ipCurCfgRmapEntry 2 }
ipCurCfgRmapMetric OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric of the route map. 4294967295 means none.
Range is [1-16777214] if OSPF metric-type is used."
::= { ipCurCfgRmapEntry 3 }
ipCurCfgRmapPrec OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The precedence of the route map."
::= { ipCurCfgRmapEntry 4 }
ipCurCfgRmapWeight OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The weight of the route map. 65535 means none"
::= { ipCurCfgRmapEntry 5 }
ipCurCfgRmapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the route map."
::= { ipCurCfgRmapEntry 6 }
ipCurCfgRmapAp OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The as-path prepend of the matched route. Up to 3 AS number can be
displayed for the string.
The usuage is:<AS number> [<AS number>][ <AS number>]"
::= { ipCurCfgRmapEntry 7 }
ipCurCfgRmapMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF metric-type of the matched route."
::= { ipCurCfgRmapEntry 8 }
ipCurCfgRmapNexthop OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peer address as nexthop of the matched route(only for BGP)."
::= { ipCurCfgRmapEntry 9 }
ipNewCfgRmapTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgRmapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP route map in the new configuration block."
::= { ipRmapCfg 3 }
ipNewCfgRmapEntry OBJECT-TYPE
SYNTAX IpNewCfgRmapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IP route map."
INDEX { ipNewCfgRmapIndex }
::= { ipNewCfgRmapTable 1 }
IpNewCfgRmapEntry ::= SEQUENCE {
ipNewCfgRmapIndex Integer32,
ipNewCfgRmapLp Unsigned32,
ipNewCfgRmapMetric Unsigned32,
ipNewCfgRmapPrec INTEGER,
ipNewCfgRmapWeight INTEGER,
ipNewCfgRmapAp DisplayString,
ipNewCfgRmapState INTEGER,
ipNewCfgRmapMetricType INTEGER,
ipNewCfgRmapNexthop INTEGER,
ipNewCfgRmapDelete INTEGER
}
ipNewCfgRmapIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route map number for which the RMAP is related."
::= { ipNewCfgRmapEntry 1}
ipNewCfgRmapLp OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The local-preference of the route map. 4294967295 means none"
::= { ipNewCfgRmapEntry 2 }
ipNewCfgRmapMetric OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric of the route map. 4294967295 means none.
Range is [1-16777214] if OSPF metric-type is used."
::= { ipNewCfgRmapEntry 3 }
ipNewCfgRmapPrec OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The precedence of the route map."
::= { ipNewCfgRmapEntry 4 }
ipNewCfgRmapWeight OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The weight of the route map. 65535 means none"
::= { ipNewCfgRmapEntry 5 }
ipNewCfgRmapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the route map."
::= { ipNewCfgRmapEntry 6 }
ipNewCfgRmapAp OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..17))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The as-path prepend of the matched route. Up to 3 AS number can be
displayed for the string.
The usuage is:<AS number> [<AS number>][ <AS number>]"
::= { ipNewCfgRmapEntry 7 }
ipNewCfgRmapMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The OSPF metric-type of the matched route."
::= { ipNewCfgRmapEntry 8 }
ipNewCfgRmapDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { ipNewCfgRmapEntry 9 }
ipNewCfgRmapNexthop OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Peer address as nexthop of the matched route(only for BGP)."
::= { ipNewCfgRmapEntry 10 }
ipAlistTableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the IP route map table."
::= { ipRmapCfg 4 }
ipCurCfgAlistTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgAlistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP route map access list in the current configuration
block."
::= { ipRmapCfg 5 }
ipCurCfgAlistEntry OBJECT-TYPE
SYNTAX IpCurCfgAlistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IP route map."
INDEX { ipCurCfgAlistRmapIndex, ipCurCfgAlistIndex }
::= { ipCurCfgAlistTable 1 }
IpCurCfgAlistEntry ::= SEQUENCE {
ipCurCfgAlistRmapIndex Integer32,
ipCurCfgAlistIndex Integer32,
ipCurCfgAlistNwf INTEGER,
ipCurCfgAlistMetric Unsigned32,
ipCurCfgAlistAction INTEGER,
ipCurCfgAlistState INTEGER
}
ipCurCfgAlistRmapIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route map number for which the RMAP is related."
::= { ipCurCfgAlistEntry 1 }
ipCurCfgAlistIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The access list number for which the access list is related."
::= { ipCurCfgAlistEntry 2 }
ipCurCfgAlistNwf OBJECT-TYPE
SYNTAX INTEGER (0..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network filter number of the route map access list.
0 means none"
::= { ipCurCfgAlistEntry 3 }
ipCurCfgAlistMetric OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric of the route map access list. 4294967295 means none"
::= { ipCurCfgAlistEntry 4 }
ipCurCfgAlistAction OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action of the route map access list."
::= { ipCurCfgAlistEntry 5 }
ipCurCfgAlistState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the route map access list."
::= { ipCurCfgAlistEntry 6 }
ipNewCfgAlistTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgAlistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP route map access list in the current configuration
block."
::= { ipRmapCfg 6 }
ipNewCfgAlistEntry OBJECT-TYPE
SYNTAX IpNewCfgAlistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IP route map."
INDEX { ipNewCfgAlistRmapIndex, ipNewCfgAlistIndex }
::= { ipNewCfgAlistTable 1 }
IpNewCfgAlistEntry ::= SEQUENCE {
ipNewCfgAlistRmapIndex Integer32,
ipNewCfgAlistIndex Integer32,
ipNewCfgAlistNwf INTEGER,
ipNewCfgAlistMetric Unsigned32,
ipNewCfgAlistAction INTEGER,
ipNewCfgAlistState INTEGER,
ipNewCfgAlistDelete INTEGER
}
ipNewCfgAlistRmapIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route map number for which the RMAP is related."
::= { ipNewCfgAlistEntry 1 }
ipNewCfgAlistIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The access list number for which the access list is related."
::= { ipNewCfgAlistEntry 2 }
ipNewCfgAlistNwf OBJECT-TYPE
SYNTAX INTEGER (1..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The network filter number of the route map access list.
0 means none"
::= { ipNewCfgAlistEntry 3 }
ipNewCfgAlistMetric OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric of the route map access list. 4294967295 means none"
::= { ipNewCfgAlistEntry 4 }
ipNewCfgAlistAction OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Action of the route map access list."
::= { ipNewCfgAlistEntry 5 }
ipNewCfgAlistState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the route map access list."
::= { ipNewCfgAlistEntry 6 }
ipNewCfgAlistDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { ipNewCfgAlistEntry 7 }
ipAspathTableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the IP route map table."
::= { ipRmapCfg 7 }
ipCurCfgAspathTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgAspathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP route map access path configuration."
::= { ipRmapCfg 8 }
ipCurCfgAspathEntry OBJECT-TYPE
SYNTAX IpCurCfgAspathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IP route map."
INDEX { ipCurCfgAspathRmapIndex, ipCurCfgAlistIndex }
::= { ipCurCfgAspathTable 1 }
IpCurCfgAspathEntry ::= SEQUENCE {
ipCurCfgAspathRmapIndex Integer32,
ipCurCfgAspathIndex Integer32,
ipCurCfgAspathAS INTEGER,
ipCurCfgAspathAction INTEGER,
ipCurCfgAspathState INTEGER
}
ipCurCfgAspathRmapIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route map number for which the RMAP is related."
::= { ipCurCfgAspathEntry 1 }
ipCurCfgAspathIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The access path number for which the access list is related."
::= { ipCurCfgAspathEntry 2 }
ipCurCfgAspathAS OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS number of the route map access path.
0 means none"
::= { ipCurCfgAspathEntry 3 }
ipCurCfgAspathAction OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action of the route map access path."
::= { ipCurCfgAspathEntry 4 }
ipCurCfgAspathState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the route map access path."
::= { ipCurCfgAspathEntry 5 }
ipNewCfgAspathTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgAspathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP route map access path configuration"
::= { ipRmapCfg 9 }
ipNewCfgAspathEntry OBJECT-TYPE
SYNTAX IpNewCfgAspathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IP route map."
INDEX { ipNewCfgAspathRmapIndex, ipNewCfgAspathIndex }
::= { ipNewCfgAspathTable 1 }
IpNewCfgAspathEntry ::= SEQUENCE {
ipNewCfgAspathRmapIndex Integer32,
ipNewCfgAspathIndex Integer32,
ipNewCfgAspathAS INTEGER,
ipNewCfgAspathAction INTEGER,
ipNewCfgAspathState INTEGER,
ipNewCfgAspathDelete INTEGER
}
ipNewCfgAspathRmapIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route map number for which the RMAP is related."
::= { ipNewCfgAspathEntry 1 }
ipNewCfgAspathIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The access path number for which the access list is related."
::= { ipNewCfgAspathEntry 2 }
ipNewCfgAspathAS OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The AS number of the route map access path.
0 means none"
::= { ipNewCfgAspathEntry 3 }
ipNewCfgAspathAction OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Action of the route map access path."
::= { ipNewCfgAspathEntry 4 }
ipNewCfgAspathState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the route map access path."
::= { ipNewCfgAspathEntry 5 }
ipNewCfgAspathDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { ipNewCfgAspathEntry 6 }
--
-- IP BGP configuration
--
bgpGeneral OBJECT IDENTIFIER ::= { bgpCfg 1 }
bgpCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BGP global state."
::= { bgpGeneral 1 }
bgpNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Globally turn BGP on or off."
::= { bgpGeneral 2 }
bgpCurCfgLocalPref OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967294)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Local preference value."
::= { bgpGeneral 3 }
bgpNewCfgLocalPref OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967294)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Local Preference value."
::= { bgpGeneral 4 }
bgpCurCfgASNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The autonomous system (AS) number."
::= { bgpGeneral 5 }
bgpNewCfgASNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The autonomous system (AS) number."
::= { bgpGeneral 6 }
bgpCurCfgEbgpMaxPaths OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967294)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum eBGP Paths."
::= { bgpGeneral 7 }
bgpNewCfgEbgpMaxPaths OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967294)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum eBGP Paths."
::= { bgpGeneral 8 }
bgpCurCfgIbgpMaxPaths OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967294)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum iBGP Paths."
::= { bgpGeneral 9 }
bgpNewCfgIbgpMaxPaths OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967294)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum iBGP Paths."
::= { bgpGeneral 10 }
bgpCurCfgAsn4Comp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ASN4 to ASN2 compatibility."
::= { bgpGeneral 11 }
bgpNewCfgAsn4Comp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ASN4 to ASN2 compatibility."
::= { bgpGeneral 12 }
bgpCurCfgDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BGP dscp marking value."
::= { bgpGeneral 13 }
bgpNewCfgDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BGP dscp marking value."
::= { bgpGeneral 14 }
bgpNewCfgClusterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cluster ID."
::= { bgpGeneral 15 }
bgpCurCfgClusterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cluster ID."
::= { bgpGeneral 16 }
bgpNewCfgClientToClientReflection OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable client to client route reflection"
::= { bgpGeneral 17 }
bgpCurCfgClientToClientReflection OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable client to client route reflection"
::= { bgpGeneral 18 }
bgpPeerTableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the BGP peer table."
::= { bgpCfg 2 }
bgpCurCfgPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpCurCfgPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of BGP peer in the current configuration block."
::= { bgpCfg 3 }
bgpCurCfgPeerEntry OBJECT-TYPE
SYNTAX BgpCurCfgPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a BGP peer."
INDEX { bgpCurCfgPeerIndex }
::= { bgpCurCfgPeerTable 1 }
BgpCurCfgPeerEntry ::= SEQUENCE {
bgpCurCfgPeerIndex Integer32,
bgpCurCfgPeerRemoteAddr IpAddress,
bgpCurCfgPeerRemoteAs INTEGER,
bgpCurCfgPeerPassive INTEGER,
bgpCurCfgPeerHold INTEGER,
bgpCurCfgPeerAlive INTEGER,
bgpCurCfgPeerAdvert INTEGER,
bgpCurCfgPeerRetry INTEGER,
bgpCurCfgPeerOrig INTEGER,
bgpCurCfgPeerRipState INTEGER,
bgpCurCfgPeerTtl INTEGER,
bgpCurCfgPeerPassword DisplayString,
bgpCurCfgPeerState INTEGER,
bgpCurCfgPeerMetric Unsigned32,
bgpCurCfgPeerDefaultAction INTEGER,
bgpCurCfgPeerOspfState INTEGER,
bgpCurCfgPeerFixedState INTEGER,
bgpCurCfgPeerStaticState INTEGER,
bgpCurCfgPeerInRmapList OCTET STRING,
bgpCurCfgPeerOutRmapList OCTET STRING
, bgpCurCfgPeerUpdateSrcIf INTEGER
, bgpCurCfgPeerUpdateSrcLoopIf INTEGER
, bgpCurCfgPeerTtlSecHops INTEGER
,bgpCurCfgPeerNexthopSelf INTEGER
, bgpCurCfgPeerClient INTEGER
}
bgpCurCfgPeerIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP peer number for which the BGP peer table is related."
::= { bgpCurCfgPeerEntry 1 }
bgpCurCfgPeerRemoteAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote IP address of the BGP peer."
::= { bgpCurCfgPeerEntry 2 }
bgpCurCfgPeerRemoteAs OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote AS number of the BGP peer. 0 means none"
::= { bgpCurCfgPeerEntry 3 }
bgpCurCfgPeerTtl OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time-to-live value of the BGP peer IP datagram. 0 means none."
::= { bgpCurCfgPeerEntry 4 }
bgpCurCfgPeerState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the peer."
::= { bgpCurCfgPeerEntry 5 }
bgpCurCfgPeerMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967294)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric value of the BGP peer. A value of '0' means none"
::= { bgpCurCfgPeerEntry 10 }
bgpCurCfgPeerDefaultAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
import(2),
originate(3),
redistribute(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of default route action."
::= { bgpCurCfgPeerEntry 11 }
bgpCurCfgPeerOspfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable advertising OSPF routes."
::= { bgpCurCfgPeerEntry 12 }
bgpCurCfgPeerFixedState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable advertising fixed routes."
::= { bgpCurCfgPeerEntry 13 }
bgpCurCfgPeerStaticState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable advertising static routes."
::= { bgpCurCfgPeerEntry 14 }
bgpCurCfgPeerInRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the in route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { bgpCurCfgPeerEntry 16 }
bgpCurCfgPeerOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { bgpCurCfgPeerEntry 17 }
bgpCurCfgPeerHold OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hold time"
::= { bgpCurCfgPeerEntry 18 }
bgpCurCfgPeerAlive OBJECT-TYPE
SYNTAX INTEGER (0..21845)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The keep alive time"
::= { bgpCurCfgPeerEntry 19 }
bgpCurCfgPeerAdvert OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The min time between advertisements"
::= { bgpCurCfgPeerEntry 20 }
bgpCurCfgPeerRetry OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connect retry interval"
::= { bgpCurCfgPeerEntry 21 }
bgpCurCfgPeerOrig OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The min time between route originations"
::= { bgpCurCfgPeerEntry 22 }
bgpCurCfgPeerRipState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable advertising RIP routes"
::= { bgpCurCfgPeerEntry 23 }
bgpCurCfgPeerPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peer BGP password"
::= { bgpCurCfgPeerEntry 24 }
bgpCurCfgPeerPassive OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable BGP passive peer"
::= { bgpCurCfgPeerEntry 25 }
bgpCurCfgPeerUpdateSrcIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BGP peer update source interface index"
::= { bgpCurCfgPeerEntry 30 }
bgpCurCfgPeerUpdateSrcLoopIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BGP peer update source loopback interface index"
::= { bgpCurCfgPeerEntry 31 }
bgpCurCfgPeerTtlSecHops OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP ttl security hops. 0 means none."
::= { bgpCurCfgPeerEntry 32 }
bgpCurCfgPeerNexthopSelf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable using this router as next-hop in BGP updates."
::= { bgpCurCfgPeerEntry 33 }
bgpCurCfgPeerClient OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable BGP client peer"
::= { bgpCurCfgPeerEntry 34 }
bgpNewCfgPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpNewCfgPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of BGP peer in the new configuration block."
::= { bgpCfg 4 }
bgpNewCfgPeerEntry OBJECT-TYPE
SYNTAX BgpNewCfgPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a BGP peer."
INDEX { bgpNewCfgPeerIndex }
::= { bgpNewCfgPeerTable 1 }
BgpNewCfgPeerEntry ::= SEQUENCE {
bgpNewCfgPeerIndex Integer32,
bgpNewCfgPeerRemoteAddr IpAddress,
bgpNewCfgPeerRemoteAs INTEGER,
bgpNewCfgPeerPassive INTEGER,
bgpNewCfgPeerHold INTEGER,
bgpNewCfgPeerAlive INTEGER,
bgpNewCfgPeerAdvert INTEGER,
bgpNewCfgPeerRetry INTEGER,
bgpNewCfgPeerOrig INTEGER,
bgpNewCfgPeerRipState INTEGER,
bgpNewCfgPeerTtl INTEGER,
bgpNewCfgPeerPassword DisplayString,
bgpNewCfgPeerState INTEGER,
bgpNewCfgPeerDelete INTEGER,
bgpNewCfgPeerMetric Unsigned32,
bgpNewCfgPeerDefaultAction INTEGER,
bgpNewCfgPeerOspfState INTEGER,
bgpNewCfgPeerFixedState INTEGER,
bgpNewCfgPeerStaticState INTEGER,
bgpNewCfgPeerInRmapList OCTET STRING,
bgpNewCfgPeerOutRmapList OCTET STRING,
bgpNewCfgPeerAddInRmap Integer32,
bgpNewCfgPeerAddOutRmap Integer32,
bgpNewCfgPeerRemoveInRmap Integer32,
bgpNewCfgPeerRemoveOutRmap Integer32
, bgpNewCfgPeerUpdateSrcIf INTEGER
, bgpNewCfgPeerUpdateSrcLoopIf INTEGER
, bgpNewCfgPeerTtlSecHops INTEGER
,bgpNewCfgPeerNexthopSelf INTEGER
, bgpNewCfgPeerClient INTEGER
}
bgpNewCfgPeerIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP peer number for which the BGP peer table is related."
::= { bgpNewCfgPeerEntry 1}
bgpNewCfgPeerRemoteAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remote IP address of the BGP peer."
::= { bgpNewCfgPeerEntry 2 }
bgpNewCfgPeerRemoteAs OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remote AS number of the BGP peer. 0 means none"
::= { bgpNewCfgPeerEntry 3 }
bgpNewCfgPeerTtl OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time-to-live value of the BGP peer IP datagram. 0 means none."
::= { bgpNewCfgPeerEntry 4 }
bgpNewCfgPeerState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the peer."
::= { bgpNewCfgPeerEntry 5 }
bgpNewCfgPeerDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { bgpNewCfgPeerEntry 6 }
bgpNewCfgPeerMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967294)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric value of the BGP peer. A value of '0' means none"
::= { bgpNewCfgPeerEntry 10 }
bgpNewCfgPeerDefaultAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
import(2),
originate(3),
redistribute(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of default route action."
::= { bgpNewCfgPeerEntry 11 }
bgpNewCfgPeerOspfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable advertising OSPF routes."
::= { bgpNewCfgPeerEntry 12 }
bgpNewCfgPeerFixedState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable advertising fixed routes."
::= { bgpNewCfgPeerEntry 13 }
bgpNewCfgPeerStaticState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable advertising static routes."
::= { bgpNewCfgPeerEntry 14 }
bgpNewCfgPeerInRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the in route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { bgpNewCfgPeerEntry 16 }
bgpNewCfgPeerOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { bgpNewCfgPeerEntry 17 }
bgpNewCfgPeerAddInRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The route map to be add into in-rmap list. When read,
0 is returned."
::= { bgpNewCfgPeerEntry 18 }
bgpNewCfgPeerAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read,
0 is returned."
::= { bgpNewCfgPeerEntry 19 }
bgpNewCfgPeerRemoveInRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { bgpNewCfgPeerEntry 20 }
bgpNewCfgPeerRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { bgpNewCfgPeerEntry 21 }
bgpNewCfgPeerHold OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The hold time"
::= { bgpNewCfgPeerEntry 22 }
bgpNewCfgPeerAlive OBJECT-TYPE
SYNTAX INTEGER (0..21845)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The keep alive time"
::= { bgpNewCfgPeerEntry 23 }
bgpNewCfgPeerAdvert OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The min time between advertisements"
::= { bgpNewCfgPeerEntry 24 }
bgpNewCfgPeerRetry OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The connect retry interval"
::= { bgpNewCfgPeerEntry 25 }
bgpNewCfgPeerOrig OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The min time between route originations"
::= { bgpNewCfgPeerEntry 26 }
bgpNewCfgPeerRipState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable advertising RIP routes"
::= { bgpNewCfgPeerEntry 27 }
bgpNewCfgPeerPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Peer BGP password"
::= { bgpNewCfgPeerEntry 28 }
bgpNewCfgPeerPassive OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable BGP passive peer"
::= { bgpNewCfgPeerEntry 29 }
bgpNewCfgPeerUpdateSrcIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"BGP peer update source interface index"
::= { bgpNewCfgPeerEntry 30 }
bgpNewCfgPeerUpdateSrcLoopIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"BGP peer update source loopback interface index"
::= { bgpNewCfgPeerEntry 31 }
bgpNewCfgPeerTtlSecHops OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The BGP ttl security hops. 0 means none."
::= { bgpNewCfgPeerEntry 32 }
bgpNewCfgPeerNexthopSelf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/Disable using this router as next-hop in BGP updates."
::= { bgpNewCfgPeerEntry 33 }
bgpNewCfgPeerClient OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable BGP client peer"
::= { bgpNewCfgPeerEntry 34 }
--
-- BGP Aggregation Table
--
bgpAggrTableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the BGP aggregation table."
::= { bgpCfg 5 }
bgpCurCfgAggrTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpCurCfgAggrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of BGP aggregation configuration."
::= { bgpCfg 6 }
bgpCurCfgAggrEntry OBJECT-TYPE
SYNTAX BgpCurCfgAggrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a BGP aggregation."
INDEX { bgpCurCfgAggrIndex }
::= { bgpCurCfgAggrTable 1 }
BgpCurCfgAggrEntry ::= SEQUENCE {
bgpCurCfgAggrIndex Integer32,
bgpCurCfgAggrAddr IpAddress,
bgpCurCfgAggrMask IpAddress,
bgpCurCfgAggrState INTEGER
}
bgpCurCfgAggrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aggregation number for which the BGP aggregation is related."
::= { bgpCurCfgAggrEntry 1}
bgpCurCfgAggrAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the BGP aggregation."
::= { bgpCurCfgAggrEntry 2 }
bgpCurCfgAggrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask of the BGP aggregation."
::= { bgpCurCfgAggrEntry 3 }
bgpCurCfgAggrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the BGP aggregation."
::= { bgpCurCfgAggrEntry 4 }
bgpNewCfgAggrTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpNewCfgAggrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of BGP aggregation configuration."
::= { bgpCfg 7 }
bgpNewCfgAggrEntry OBJECT-TYPE
SYNTAX BgpNewCfgAggrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an BGP aggregation."
INDEX { bgpNewCfgAggrIndex }
::= { bgpNewCfgAggrTable 1 }
BgpNewCfgAggrEntry ::= SEQUENCE {
bgpNewCfgAggrIndex Integer32,
bgpNewCfgAggrAddr IpAddress,
bgpNewCfgAggrMask IpAddress,
bgpNewCfgAggrState INTEGER,
bgpNewCfgAggrDelete INTEGER
}
bgpNewCfgAggrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aggregation number for which the BGP aggregation is related."
::= { bgpNewCfgAggrEntry 1}
bgpNewCfgAggrAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address of the BGP aggregation."
::= { bgpNewCfgAggrEntry 2 }
bgpNewCfgAggrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The subnet mask of the BGP aggregation."
::= { bgpNewCfgAggrEntry 3 }
bgpNewCfgAggrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the BGP aggregation."
::= { bgpNewCfgAggrEntry 4 }
bgpNewCfgAggrDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { bgpNewCfgAggrEntry 5 }
bgpGroupTableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of groups in the BGP groups table."
::= { bgpCfg 8 }
bgpCurCfgGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpCurCfgGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of BGP group in the current configuration block."
::= { bgpCfg 9 }
bgpCurCfgGroupEntry OBJECT-TYPE
SYNTAX BgpCurCfgGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a BGP group."
INDEX { bgpCurCfgGroupIndex }
::= { bgpCurCfgGroupTable 1 }
BgpCurCfgGroupEntry ::= SEQUENCE {
bgpCurCfgGroupIndex Integer32,
bgpCurCfgGroupName DisplayString,
bgpCurCfgGroupRemoteAddr IpAddress,
bgpCurCfgGroupRemoteMask IpAddress,
bgpCurCfgGroupLimit INTEGER,
bgpCurCfgGroupUpdateSrcIf INTEGER,
bgpCurCfgGroupUpdateSrcLoopIf INTEGER,
bgpCurCfgGroupHold INTEGER,
bgpCurCfgGroupAlive INTEGER,
bgpCurCfgGroupAdvert INTEGER,
bgpCurCfgGroupOrig INTEGER,
bgpCurCfgGroupMetric Unsigned32,
bgpCurCfgGroupTtl INTEGER,
bgpCurCfgGroupDefaultAction INTEGER,
bgpCurCfgGroupOspfState INTEGER,
bgpCurCfgGroupRipState INTEGER,
bgpCurCfgGroupFixedState INTEGER,
bgpCurCfgGroupStaticState INTEGER,
bgpCurCfgGroupInRmapList OCTET STRING,
bgpCurCfgGroupOutRmapList OCTET STRING,
bgpCurCfgGroupPassword DisplayString,
bgpCurCfgGroupState INTEGER
, bgpCurCfgGroupTtlSecHops INTEGER
,bgpCurCfgGroupNexthopSelf INTEGER
, bgpCurCfgGroupClient INTEGER
}
bgpCurCfgGroupIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP group number for which the BGP group table is related."
::= { bgpCurCfgGroupEntry 1 }
bgpCurCfgGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group name."
::= { bgpCurCfgGroupEntry 2 }
bgpCurCfgGroupRemoteAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the BGP group."
::= { bgpCurCfgGroupEntry 3 }
bgpCurCfgGroupRemoteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask of the BGP group."
::= { bgpCurCfgGroupEntry 4 }
bgpCurCfgGroupLimit OBJECT-TYPE
SYNTAX INTEGER (1..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The maximum number of BGP dynamic peers."
::= { bgpCurCfgGroupEntry 5 }
bgpCurCfgGroupUpdateSrcIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BGP group update source interface index"
::= { bgpCurCfgGroupEntry 6 }
bgpCurCfgGroupUpdateSrcLoopIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BGP group update source loopback interface index"
::= { bgpCurCfgGroupEntry 7 }
bgpCurCfgGroupHold OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hold time"
::= { bgpCurCfgGroupEntry 8 }
bgpCurCfgGroupAlive OBJECT-TYPE
SYNTAX INTEGER (0..21845)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The keep alive time"
::= { bgpCurCfgGroupEntry 9 }
bgpCurCfgGroupAdvert OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The min time between advertisements"
::= { bgpCurCfgGroupEntry 10 }
bgpCurCfgGroupOrig OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The min time between route originations"
::= { bgpCurCfgGroupEntry 11 }
bgpCurCfgGroupMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967294)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric value of the BGP group. A value of '0' means none"
::= { bgpCurCfgGroupEntry 12 }
bgpCurCfgGroupTtl OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time-to-live value of the BGP peer IP datagram. 0 means none."
::= { bgpCurCfgGroupEntry 13 }
bgpCurCfgGroupDefaultAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
import(2),
originate(3),
redistribute(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of default route action."
::= { bgpCurCfgGroupEntry 14 }
bgpCurCfgGroupOspfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable advertising OSPF routes."
::= { bgpCurCfgGroupEntry 15 }
bgpCurCfgGroupRipState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable advertising RIP routes"
::= { bgpCurCfgGroupEntry 16 }
bgpCurCfgGroupFixedState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable advertising fixed routes."
::= { bgpCurCfgGroupEntry 17 }
bgpCurCfgGroupStaticState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable advertising static routes."
::= { bgpCurCfgGroupEntry 18 }
bgpCurCfgGroupInRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the in route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { bgpCurCfgGroupEntry 19 }
bgpCurCfgGroupOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { bgpCurCfgGroupEntry 20 }
bgpCurCfgGroupPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peer BGP password"
::= { bgpCurCfgGroupEntry 21 }
bgpCurCfgGroupState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the group."
::= { bgpCurCfgGroupEntry 22 }
bgpCurCfgGroupTtlSecHops OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP ttl security hops. 0 means none."
::= { bgpCurCfgGroupEntry 23 }
bgpCurCfgGroupNexthopSelf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable using this router as next-hop in BGP updates."
::= { bgpCurCfgGroupEntry 24 }
bgpCurCfgGroupClient OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable Route Reflector for this client."
::= { bgpCurCfgGroupEntry 25 }
bgpNewCfgGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpNewCfgGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of BGP group in the new configuration block."
::= { bgpCfg 10 }
bgpNewCfgGroupEntry OBJECT-TYPE
SYNTAX BgpNewCfgGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a BGP group."
INDEX { bgpNewCfgGroupIndex }
::= { bgpNewCfgGroupTable 1 }
BgpNewCfgGroupEntry ::= SEQUENCE {
bgpNewCfgGroupIndex Integer32,
bgpNewCfgGroupName DisplayString,
bgpNewCfgGroupRemoteAddr IpAddress,
bgpNewCfgGroupRemoteMask IpAddress,
bgpNewCfgGroupLimit INTEGER,
bgpNewCfgGroupUpdateSrcIf INTEGER,
bgpNewCfgGroupUpdateSrcLoopIf INTEGER,
bgpNewCfgGroupHold INTEGER,
bgpNewCfgGroupAlive INTEGER,
bgpNewCfgGroupAdvert INTEGER,
bgpNewCfgGroupOrig INTEGER,
bgpNewCfgGroupMetric Unsigned32,
bgpNewCfgGroupTtl INTEGER,
bgpNewCfgGroupDefaultAction INTEGER,
bgpNewCfgGroupOspfState INTEGER,
bgpNewCfgGroupRipState INTEGER,
bgpNewCfgGroupFixedState INTEGER,
bgpNewCfgGroupStaticState INTEGER,
bgpNewCfgGroupInRmapList OCTET STRING,
bgpNewCfgGroupOutRmapList OCTET STRING,
bgpNewCfgGroupAddInRmap Integer32,
bgpNewCfgGroupAddOutRmap Integer32,
bgpNewCfgGroupRemoveInRmap Integer32,
bgpNewCfgGroupRemoveOutRmap Integer32,
bgpNewCfgGroupPassword DisplayString,
bgpNewCfgGroupDelete INTEGER,
bgpNewCfgGroupState INTEGER
, bgpNewCfgGroupTtlSecHops INTEGER
, bgpNewCfgGroupNexthopSelf INTEGER
, bgpNewCfgGroupClient INTEGER
}
bgpNewCfgGroupIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The BGP group number for which the BGP group table is related."
::= { bgpNewCfgGroupEntry 1 }
bgpNewCfgGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The group name."
::= { bgpNewCfgGroupEntry 2 }
bgpNewCfgGroupRemoteAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address of the BGP group."
::= { bgpNewCfgGroupEntry 3 }
bgpNewCfgGroupRemoteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The subnet mask of the BGP group."
::= { bgpNewCfgGroupEntry 4 }
bgpNewCfgGroupLimit OBJECT-TYPE
SYNTAX INTEGER (1..96)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The maximum number of BGP dynamic peers."
::= { bgpNewCfgGroupEntry 5 }
bgpNewCfgGroupUpdateSrcIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"BGP group update source interface index"
::= { bgpNewCfgGroupEntry 6 }
bgpNewCfgGroupUpdateSrcLoopIf OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"BGP group update source loopback interface index"
::= { bgpNewCfgGroupEntry 7 }
bgpNewCfgGroupHold OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The hold time"
::= { bgpNewCfgGroupEntry 8 }
bgpNewCfgGroupAlive OBJECT-TYPE
SYNTAX INTEGER (0..21845)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The keep alive time"
::= { bgpNewCfgGroupEntry 9 }
bgpNewCfgGroupAdvert OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The min time between advertisements"
::= { bgpNewCfgGroupEntry 10 }
bgpNewCfgGroupOrig OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The min time between route originations"
::= { bgpNewCfgGroupEntry 11 }
bgpNewCfgGroupMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967294)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric value of the BGP group. A value of '0' means none"
::= { bgpNewCfgGroupEntry 12 }
bgpNewCfgGroupTtl OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time-to-live value of the BGP peer IP datagram. 0 means none."
::= { bgpNewCfgGroupEntry 13 }
bgpNewCfgGroupDefaultAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
import(2),
originate(3),
redistribute(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of default route action."
::= { bgpNewCfgGroupEntry 14 }
bgpNewCfgGroupOspfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable advertising OSPF routes."
::= { bgpNewCfgGroupEntry 15 }
bgpNewCfgGroupRipState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable advertising RIP routes"
::= { bgpNewCfgGroupEntry 16 }
bgpNewCfgGroupFixedState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable advertising fixed routes."
::= { bgpNewCfgGroupEntry 17 }
bgpNewCfgGroupStaticState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable advertising static routes."
::= { bgpNewCfgGroupEntry 18 }
bgpNewCfgGroupInRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the in route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { bgpNewCfgGroupEntry 19 }
bgpNewCfgGroupOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { bgpNewCfgGroupEntry 20 }
bgpNewCfgGroupAddInRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The route map to be add into in-rmap list. When read,
0 is returned."
::= { bgpNewCfgGroupEntry 21 }
bgpNewCfgGroupAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read,
0 is returned."
::= { bgpNewCfgGroupEntry 22 }
bgpNewCfgGroupRemoveInRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { bgpNewCfgGroupEntry 23 }
bgpNewCfgGroupRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { bgpNewCfgGroupEntry 24 }
bgpNewCfgGroupPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Peer BGP password"
::= { bgpNewCfgGroupEntry 25 }
bgpNewCfgGroupDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { bgpNewCfgGroupEntry 26 }
bgpNewCfgGroupState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the group."
::= { bgpNewCfgGroupEntry 27 }
bgpNewCfgGroupTtlSecHops OBJECT-TYPE
SYNTAX INTEGER (0..254)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The BGP ttl security hops. 0 means none."
::= { bgpNewCfgGroupEntry 28 }
bgpNewCfgGroupNexthopSelf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/Disable using this router as next-hop in BGP updates."
::= { bgpNewCfgGroupEntry 29 }
bgpNewCfgGroupClient OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/Disable Route Reflector for this client."
::= { bgpNewCfgGroupEntry 30 }
bgpCurCfgGroupRASTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpCurCfgGroupRASEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of BGP group RASs in the current configuration block."
::= { bgpCfg 11 }
bgpCurCfgGroupRASEntry OBJECT-TYPE
SYNTAX BgpCurCfgGroupRASEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a BGP group RAS."
INDEX { bgpCurCfgGroupIndex, bgpCurCfgGroupRASIndex }
::= { bgpCurCfgGroupRASTable 1 }
BgpCurCfgGroupRASEntry ::= SEQUENCE {
bgpCurCfgGroupRASIndex Integer32,
bgpCurCfgGroupRAS INTEGER
}
bgpCurCfgGroupRASIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP remote-as number for which the BGP RAS table is related."
::= { bgpCurCfgGroupRASEntry 1 }
bgpCurCfgGroupRAS OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote AS number of the BGP group bgpCurCfgGroupIndex. 0 means none"
::= { bgpCurCfgGroupRASEntry 2 }
bgpNewCfgGroupRASTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpNewCfgGroupRASEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of BGP group RASs in the new configuration block."
::= { bgpCfg 12 }
bgpNewCfgGroupRASEntry OBJECT-TYPE
SYNTAX BgpNewCfgGroupRASEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a BGP group RAS."
INDEX { bgpNewCfgGroupIndex, bgpNewCfgGroupRASIndex }
::= { bgpNewCfgGroupRASTable 1 }
BgpNewCfgGroupRASEntry ::= SEQUENCE {
bgpNewCfgGroupRASIndex Integer32,
bgpNewCfgGroupRAS INTEGER
}
bgpNewCfgGroupRASIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP group RAS number for which the BGP group RASs table is related."
::= { bgpNewCfgGroupRASEntry 1}
bgpNewCfgGroupRAS OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remote AS number of the BGP group bgpNewCfgGroupIndex. 0 means none"
::= { bgpNewCfgGroupRASEntry 2 }
bgpInfoGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpInfoGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of BGP group in the current configuration block."
::= { bgpInfo 4 }
bgpInfoGroupEntry OBJECT-TYPE
SYNTAX BgpInfoGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a BGP group."
INDEX { bgpInfoGroupIndex }
::= { bgpInfoGroupTable 1 }
BgpInfoGroupEntry ::= SEQUENCE {
bgpInfoGroupIndex Integer32,
bgpInfoGroupName DisplayString,
bgpInfoGroupRemoteAddr IpAddress,
bgpInfoGroupRemoteMask IpAddress,
bgpInfoGroupLimit Integer32,
bgpInfoGroupPeersNum Integer32,
bgpInfoGroupState INTEGER
}
bgpInfoGroupIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP group number for which the BGP group table is related."
::= { bgpInfoGroupEntry 1 }
bgpInfoGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP group nname for which the BGP group table is related."
::= { bgpInfoGroupEntry 2 }
bgpInfoGroupRemoteAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote IP address of the BGP group."
::= { bgpInfoGroupEntry 3 }
bgpInfoGroupRemoteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote mask of the BGP group."
::= { bgpInfoGroupEntry 4 }
bgpInfoGroupLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of BGP dynamic peers."
::= { bgpInfoGroupEntry 5 }
bgpInfoGroupPeersNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BGP dynamic peers."
::= { bgpInfoGroupEntry 6 }
bgpInfoGroupState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BGP group state."
::= { bgpInfoGroupEntry 7 }
bgpInfoGroupRASTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpInfoGroupRASEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of BGP group RASs in the current configuration block."
::= { bgpInfo 5 }
bgpInfoGroupRASEntry OBJECT-TYPE
SYNTAX BgpInfoGroupRASEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a BGP group RAS."
INDEX { bgpInfoGroupIndex, bgpInfoGroupRASIndex }
::= { bgpInfoGroupRASTable 1 }
BgpInfoGroupRASEntry ::= SEQUENCE {
bgpInfoGroupRASIndex Integer32,
bgpInfoGroupRAS INTEGER
}
bgpInfoGroupRASIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP group RAS number for which the BGP group RAS table is related."
::= { bgpInfoGroupRASEntry 1 }
bgpInfoGroupRAS OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote AS number of the BGP group bgpInfoGroupIndex."
::= { bgpInfoGroupRASEntry 2 }
bgpInfoDynamicPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpInfoDynamicPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of BGP dynamic peers."
::= { bgpInfo 6 }
bgpInfoDynamicPeerEntry OBJECT-TYPE
SYNTAX BgpInfoDynamicPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a BGP dynamic peer."
INDEX { bgpInfoDynamicPeerIndex }
::= { bgpInfoDynamicPeerTable 1 }
BgpInfoDynamicPeerEntry ::= SEQUENCE {
bgpInfoDynamicPeerIndex Integer32,
bgpInfoDynamicPeerRemoteAddr IpAddress,
bgpInfoDynamicPeerGroup Integer32,
bgpInfoDynamicPeerVersion Integer32,
bgpInfoDynamicPeerTtl Integer32,
bgpInfoDynamicPeerRemoteAs Integer32,
bgpInfoDynamicPeerRouterId IpAddress,
bgpInfoDynamicTotalReceivedPackets Integer32,
bgpInfoDynamicTotalSentPackets Integer32,
bgpInfoDynamicReceivedUpdates Integer32,
bgpInfoDynamicSentUpdates Integer32,
bgpInfoDynamicKeepalive Integer32,
bgpInfoDynamicHoldtime Integer32,
bgpInfoDynamicMinAdvTime Integer32
}
bgpInfoDynamicPeerIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP dynamic peer number for which the BGP peer table
is related."
::= { bgpInfoDynamicPeerEntry 1 }
bgpInfoDynamicPeerRemoteAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote IP address of the BGP dynamic peer."
::= { bgpInfoDynamicPeerEntry 2 }
bgpInfoDynamicPeerGroup OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group of BGP dynamic peer."
::= { bgpInfoDynamicPeerEntry 3 }
bgpInfoDynamicPeerVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version negotiated by the BGP dynamic peer."
::= { bgpInfoDynamicPeerEntry 4 }
bgpInfoDynamicPeerTtl OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time-to-live value of the BGP dynamic peer IP datagram."
::= { bgpInfoDynamicPeerEntry 5 }
bgpInfoDynamicPeerRemoteAs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote AS number of the BGP dynamic peer."
::= { bgpInfoDynamicPeerEntry 6 }
bgpInfoDynamicPeerRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The router IP address."
::= { bgpInfoDynamicPeerEntry 7 }
bgpInfoDynamicTotalReceivedPackets OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of received packets."
::= { bgpInfoDynamicPeerEntry 8 }
bgpInfoDynamicTotalSentPackets OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of sent packets."
::= { bgpInfoDynamicPeerEntry 9 }
bgpInfoDynamicReceivedUpdates OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received updates."
::= { bgpInfoDynamicPeerEntry 10 }
bgpInfoDynamicSentUpdates OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sent updates."
::= { bgpInfoDynamicPeerEntry 11 }
bgpInfoDynamicKeepalive OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The keep alive time."
::= { bgpInfoDynamicPeerEntry 12 }
bgpInfoDynamicHoldtime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hold time."
::= { bgpInfoDynamicPeerEntry 13 }
bgpInfoDynamicMinAdvTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MinAdvTime."
::= { bgpInfoDynamicPeerEntry 14 }
--
-- IP OSPF configuration
--
ospfGeneral OBJECT IDENTIFIER ::= { ospfCfg 1 }
ospfCurCfgDefaultRouteMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the metric to be assigned."
::= { ospfGeneral 1 }
ospfNewCfgDefaultRouteMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the metric to be assigned."
::= { ospfGeneral 2 }
ospfCurCfgDefaultRouteMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the AS External metric type to be assigned."
::= { ospfGeneral 3 }
ospfNewCfgDefaultRouteMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the AS External metric type to be assigned."
::= { ospfGeneral 4 }
ospfIntfTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPF Interface table."
::= { ospfGeneral 5 }
ospfAreaTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPF Area table."
::= { ospfGeneral 6 }
ospfRangeTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPF Range table."
::= { ospfGeneral 7 }
ospfVirtIntfTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPF Virtual Interface
table."
::= { ospfGeneral 8 }
ospfHostTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPF Host table."
::= { ospfGeneral 9 }
ospfCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF global state."
::= { ospfGeneral 10 }
ospfNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Globally turn OSPF on or off."
::= { ospfGeneral 11 }
ospfCurCfgLSDB OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LSDB limit for external LSA."
::= { ospfGeneral 12 }
ospfNewCfgLSDB OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the LSDB limit for external LSA."
::= { ospfGeneral 13 }
ospfCurCfgAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfCurCfgAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF area in the current configuration block."
::= { ospfCfg 2 }
ospfCurCfgAreaEntry OBJECT-TYPE
SYNTAX OspfCurCfgAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPF area."
INDEX { ospfCurCfgAreaIndex }
::= { ospfCurCfgAreaTable 1 }
OspfCurCfgAreaEntry ::= SEQUENCE {
ospfCurCfgAreaIndex Integer32,
ospfCurCfgAreaId IpAddress,
ospfCurCfgAreaSpfInterval INTEGER,
ospfCurCfgAreaAuthType INTEGER,
ospfCurCfgAreaType INTEGER,
ospfCurCfgAreaMetric INTEGER,
ospfCurCfgAreaStatus INTEGER
}
ospfCurCfgAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF area number for which the OSPF area table is related."
::= { ospfCurCfgAreaEntry 1}
ospfCurCfgAreaId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the OSPF area."
::= { ospfCurCfgAreaEntry 2 }
ospfCurCfgAreaSpfInterval OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPF interval for the OSPF area."
::= { ospfCurCfgAreaEntry 3 }
ospfCurCfgAreaAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password(2),
md5(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of authentication being used.
none(1) - no authentication
password(2) - use password
md5(3) - use MD5 authentication."
::= { ospfCurCfgAreaEntry 4 }
ospfCurCfgAreaType OBJECT-TYPE
SYNTAX INTEGER {
transit(0),
stub(1),
nssa(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of Area.
transit(0)
stub(1)
nssa(2)"
::= { ospfCurCfgAreaEntry 5 }
ospfCurCfgAreaMetric OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Metric (1-65535)"
::= { ospfCurCfgAreaEntry 6 }
ospfCurCfgAreaStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status
disabled(0)
enabled(1)"
::= { ospfCurCfgAreaEntry 7 }
ospfNewCfgAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfNewCfgAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF area in the new configuration block."
::= { ospfCfg 3 }
ospfNewCfgAreaEntry OBJECT-TYPE
SYNTAX OspfNewCfgAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPF area."
INDEX { ospfNewCfgAreaIndex }
::= { ospfNewCfgAreaTable 1 }
OspfNewCfgAreaEntry ::= SEQUENCE {
ospfNewCfgAreaIndex Integer32,
ospfNewCfgAreaId IpAddress,
ospfNewCfgAreaSpfInterval INTEGER,
ospfNewCfgAreaAuthType INTEGER,
ospfNewCfgAreaType INTEGER,
ospfNewCfgAreaMetric INTEGER,
ospfNewCfgAreaStatus INTEGER,
ospfNewCfgAreaDelete INTEGER
}
ospfNewCfgAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF area number for which the OSPF area table is related."
::= { ospfNewCfgAreaEntry 1}
ospfNewCfgAreaId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Address of the OSPF area."
::= { ospfNewCfgAreaEntry 2 }
ospfNewCfgAreaSpfInterval OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The SPF interval for the OSPF area."
::= { ospfNewCfgAreaEntry 3 }
ospfNewCfgAreaAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password(2),
md5(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Type of authentication being used.
none(1) - no authentication
password(2) - use password.
md5(3) - use MD5 authentication."
::= { ospfNewCfgAreaEntry 4 }
ospfNewCfgAreaType OBJECT-TYPE
SYNTAX INTEGER {
transit(0),
stub(1),
nssa(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of Area.
transit(0)
stub(1)
nssa(2)"
::= { ospfNewCfgAreaEntry 5 }
ospfNewCfgAreaMetric OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Metric (1-65535)"
::= { ospfNewCfgAreaEntry 6 }
ospfNewCfgAreaStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status
disabled(0)
enabled(1)"
::= { ospfNewCfgAreaEntry 7 }
ospfNewCfgAreaDelete OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete the area
no(0),
yes(1)"
::= { ospfNewCfgAreaEntry 8 }
-- OSPF Host Table
ospfCurCfgHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfCurCfgHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Host configuration."
::= { ospfCfg 12 }
ospfCurCfgHostEntry OBJECT-TYPE
SYNTAX OspfCurCfgHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPF host."
INDEX { ospfCurCfgHostIndex }
::= { ospfCurCfgHostTable 1 }
OspfCurCfgHostEntry ::= SEQUENCE {
ospfCurCfgHostIndex Integer32,
ospfCurCfgHostIpAddr IpAddress,
ospfCurCfgHostAreaIndex Integer32,
ospfCurCfgHostCost INTEGER,
ospfCurCfgHostState INTEGER
}
ospfCurCfgHostIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF host number for which the OSPF host table is related."
::= { ospfCurCfgHostEntry 1}
ospfCurCfgHostIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the OSPF host."
::= { ospfCurCfgHostEntry 2 }
ospfCurCfgHostAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The area index."
::= { ospfCurCfgHostEntry 3 }
ospfCurCfgHostCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the OSPF host."
::= { ospfCurCfgHostEntry 4 }
ospfCurCfgHostState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable an OSPF Host"
::= { ospfCurCfgHostEntry 5 }
ospfNewCfgHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfNewCfgHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Host configuration."
::= { ospfCfg 13 }
ospfNewCfgHostEntry OBJECT-TYPE
SYNTAX OspfNewCfgHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPF host."
INDEX { ospfNewCfgHostIndex }
::= { ospfNewCfgHostTable 1 }
OspfNewCfgHostEntry ::= SEQUENCE {
ospfNewCfgHostIndex Integer32,
ospfNewCfgHostIpAddr IpAddress,
ospfNewCfgHostAreaIndex Integer32,
ospfNewCfgHostCost INTEGER,
ospfNewCfgHostState INTEGER,
ospfNewCfgHostDelete INTEGER
}
ospfNewCfgHostIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF host number for which the OSPF host table is related."
::= { ospfNewCfgHostEntry 1}
ospfNewCfgHostIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Address of the OSPF host."
::= { ospfNewCfgHostEntry 2 }
ospfNewCfgHostAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The OSPF area index."
::= { ospfNewCfgHostEntry 3 }
ospfNewCfgHostCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The cost of the OSPF host."
::= { ospfNewCfgHostEntry 4 }
ospfNewCfgHostState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable an OSPF Host"
::= { ospfNewCfgHostEntry 5 }
ospfNewCfgHostDelete OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete the OSPF host:
no(0),
yes(1)"
::= { ospfNewCfgHostEntry 6 }
ospfMdkeyTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPF Mdkey table."
::= { ospfCfg 11 }
ospfCurCfgMdkeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfCurCfgMdkeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF MD5 keys in the current configuration block."
::= { ospfCfg 5 }
ospfCurCfgMdkeyEntry OBJECT-TYPE
SYNTAX OspfCurCfgMdkeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF MD keys table."
INDEX { ospfCurCfgMdkeyIndex }
::= { ospfCurCfgMdkeyTable 1 }
OspfCurCfgMdkeyEntry ::= SEQUENCE {
ospfCurCfgMdkeyIndex Integer32,
ospfCurCfgMdkeyKey DisplayString
}
ospfCurCfgMdkeyIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF MD5 Key number for which the OSPF MdKey table is related."
::= { ospfCurCfgMdkeyEntry 1}
ospfCurCfgMdkeyKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The character string representing the MD5 Key."
::= { ospfCurCfgMdkeyEntry 2 }
ospfNewCfgMdkeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfNewCfgMdkeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF MD5 keys in the new configuration block."
::= { ospfCfg 6 }
ospfNewCfgMdkeyEntry OBJECT-TYPE
SYNTAX OspfNewCfgMdkeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF MD keys table."
INDEX { ospfNewCfgMdkeyIndex }
::= { ospfNewCfgMdkeyTable 1 }
OspfNewCfgMdkeyEntry ::= SEQUENCE {
ospfNewCfgMdkeyIndex Integer32,
ospfNewCfgMdkeyKey DisplayString,
ospfNewCfgMdkeyDelete INTEGER
}
ospfNewCfgMdkeyIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF MD5 Key number for which the OSPF MdKey table is related."
::= { ospfNewCfgMdkeyEntry 1}
ospfNewCfgMdkeyKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The character string representing the MD5 Key."
::= { ospfNewCfgMdkeyEntry 2 }
ospfNewCfgMdkeyDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { ospfNewCfgMdkeyEntry 3}
ospfCurCfgIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfCurCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Interface in the current configuration block."
::= { ospfCfg 7 }
ospfCurCfgIntfEntry OBJECT-TYPE
SYNTAX OspfCurCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF Interface."
INDEX { ospfCurCfgIntfIndex }
::= { ospfCurCfgIntfTable 1 }
OspfCurCfgIntfEntry ::= SEQUENCE {
ospfCurCfgIntfIndex Integer32,
ospfCurCfgIntfArea INTEGER,
ospfCurCfgIntfMdkey INTEGER,
ospfCurCfgIntfCost INTEGER,
ospfCurCfgIntfPrio INTEGER,
ospfCurCfgIntfHello INTEGER,
ospfCurCfgIntfHelloMS INTEGER,
ospfCurCfgIntfDead INTEGER,
ospfCurCfgIntfDeadMS INTEGER,
ospfCurCfgIntfTrans INTEGER,
ospfCurCfgIntfRetra INTEGER,
ospfCurCfgIntfAuthKey DisplayString,
ospfCurCfgIntfPassive INTEGER,
ospfCurCfgIntfPtop INTEGER,
ospfCurCfgIntfStatus INTEGER
}
ospfCurCfgIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Interface number for which the OSPF Interface table is
related."
::= { ospfCurCfgIntfEntry 1}
ospfCurCfgIntfArea OBJECT-TYPE
SYNTAX INTEGER (0..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the area that the interface belongs (0..5)"
::= { ospfCurCfgIntfEntry 2 }
ospfCurCfgIntfMdkey OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MD5 key for the OSPF interface
0 (none) no MD5 authentication."
::= { ospfCurCfgIntfEntry 3 }
ospfCurCfgIntfCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface cost"
::= { ospfCurCfgIntfEntry 4 }
ospfCurCfgIntfPrio OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface router priority"
::= { ospfCurCfgIntfEntry 5 }
ospfCurCfgIntfHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hello interval"
::= { ospfCurCfgIntfEntry 6 }
ospfCurCfgIntfHelloMS OBJECT-TYPE
SYNTAX INTEGER {
seconds(0),
milliseconds(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Units of time measurement for Hello interval
seconds(0),
milliseconds(1)"
::= { ospfCurCfgIntfEntry 7 }
ospfCurCfgIntfDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dead interval"
::= { ospfCurCfgIntfEntry 8 }
ospfCurCfgIntfDeadMS OBJECT-TYPE
SYNTAX INTEGER {
seconds(0),
milliseconds(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Units of time measurement for Dead interval
seconds(0),
milliseconds(1)"
::= { ospfCurCfgIntfEntry 9 }
ospfCurCfgIntfTrans OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transit delay"
::= { ospfCurCfgIntfEntry 10 }
ospfCurCfgIntfRetra OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Retransmit interval"
::= { ospfCurCfgIntfEntry 11 }
ospfCurCfgIntfAuthKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication Key"
::= { ospfCurCfgIntfEntry 12 }
ospfCurCfgIntfPassive OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Passive interface
disabled(0),
enabled(1)"
::= { ospfCurCfgIntfEntry 13 }
ospfCurCfgIntfPtop OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Point-to-point interface
disabled(0),
enabled(1)"
::= { ospfCurCfgIntfEntry 15 }
ospfCurCfgIntfStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the interface
disabled(0),
enabled(1)"
::= { ospfCurCfgIntfEntry 14 }
ospfNewCfgIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfNewCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF interface in the new configuration block."
::= { ospfCfg 8 }
ospfNewCfgIntfEntry OBJECT-TYPE
SYNTAX OspfNewCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF interface."
INDEX { ospfNewCfgIntfIndex }
::= { ospfNewCfgIntfTable 1 }
OspfNewCfgIntfEntry ::= SEQUENCE {
ospfNewCfgIntfIndex Integer32,
ospfNewCfgIntfArea INTEGER,
ospfNewCfgIntfMdkey INTEGER,
ospfNewCfgIntfCost INTEGER,
ospfNewCfgIntfPrio INTEGER,
ospfNewCfgIntfHello INTEGER,
ospfNewCfgIntfHelloMS INTEGER,
ospfNewCfgIntfDead INTEGER,
ospfNewCfgIntfDeadMS INTEGER,
ospfNewCfgIntfTrans INTEGER,
ospfNewCfgIntfRetra INTEGER,
ospfNewCfgIntfAuthKey DisplayString,
ospfNewCfgIntfPassive INTEGER,
ospfNewCfgIntfPtop INTEGER,
ospfNewCfgIntfStatus INTEGER,
ospfNewCfgIntfDelete INTEGER
}
ospfNewCfgIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Interface number for which the OSPF Interface table is
related."
::= { ospfNewCfgIntfEntry 1}
ospfNewCfgIntfArea OBJECT-TYPE
SYNTAX INTEGER (0..19)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the area that the interface belongs"
::= { ospfNewCfgIntfEntry 2 }
ospfNewCfgIntfMdkey OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MD5 key for the OSPF interface
0 (none) no MD5 authentication."
::= { ospfNewCfgIntfEntry 3 }
ospfNewCfgIntfCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interface cost(1..65535)"
::= { ospfNewCfgIntfEntry 4 }
ospfNewCfgIntfPrio OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interface router priority(0..255)"
::= { ospfNewCfgIntfEntry 5 }
ospfNewCfgIntfHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Hello interval(1..65535s | 50..65535ms)"
::= { ospfNewCfgIntfEntry 6 }
ospfNewCfgIntfHelloMS OBJECT-TYPE
SYNTAX INTEGER {
seconds(0),
milliseconds(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Units of time measurement for Hello interval
seconds(0),
milliseconds(1)"
::= { ospfNewCfgIntfEntry 7 }
ospfNewCfgIntfDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Dead interval(1..65535s |1000..65535ms)"
::= { ospfNewCfgIntfEntry 8 }
ospfNewCfgIntfDeadMS OBJECT-TYPE
SYNTAX INTEGER {
seconds(0),
milliseconds(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Units of time measurement for Dead interval
seconds(0),
milliseconds(1)"
::= { ospfNewCfgIntfEntry 9 }
ospfNewCfgIntfTrans OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Transit delay(1..3600)"
::= { ospfNewCfgIntfEntry 10 }
ospfNewCfgIntfRetra OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Retransmit interval(1..3600)"
::= { ospfNewCfgIntfEntry 11 }
ospfNewCfgIntfAuthKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Authentication Key"
::= { ospfNewCfgIntfEntry 12 }
ospfNewCfgIntfPassive OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Passive interface
disabled(0),
enabled(1)"
::= { ospfNewCfgIntfEntry 13 }
ospfNewCfgIntfPtop OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Point-to-point interface
disabled(0),
enabled(1)"
::= { ospfNewCfgIntfEntry 16 }
ospfNewCfgIntfStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of the interface
disabled(0),
enabled(1)"
::= { ospfNewCfgIntfEntry 14 }
ospfNewCfgIntfDelete OBJECT-TYPE
SYNTAX INTEGER {
other(0),
delete(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete the interface
other(0),
delete(1)"
::= { ospfNewCfgIntfEntry 15 }
ospfCurCfgLoopIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfCurCfgLoopIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Loopback Interfaces
in the current configuration block."
::= { ospfCfg 20 }
ospfCurCfgLoopIfEntry OBJECT-TYPE
SYNTAX OspfCurCfgLoopIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF Loopback Interface."
INDEX { ospfCurCfgLoopIfIndex }
::= { ospfCurCfgLoopIfTable 1 }
OspfCurCfgLoopIfEntry ::= SEQUENCE {
ospfCurCfgLoopIfIndex Integer32,
ospfCurCfgLoopIfArea INTEGER,
ospfCurCfgLoopIfStatus INTEGER
}
ospfCurCfgLoopIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Loopback Interface number for which
the OSPF Interface table is related."
::= { ospfCurCfgLoopIfEntry 1}
ospfCurCfgLoopIfArea OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the area that the loopback interface belongs"
::= { ospfCurCfgLoopIfEntry 2 }
ospfCurCfgLoopIfStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the loopback interface
disabled(0),
enabled(1)"
::= { ospfCurCfgLoopIfEntry 3 }
ospfNewCfgLoopIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfNewCfgLoopIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF loopback interface in the new configuration block."
::= { ospfCfg 21 }
ospfNewCfgLoopIfEntry OBJECT-TYPE
SYNTAX OspfNewCfgLoopIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF loopback interface."
INDEX { ospfNewCfgLoopIfIndex }
::= { ospfNewCfgLoopIfTable 1 }
OspfNewCfgLoopIfEntry ::= SEQUENCE {
ospfNewCfgLoopIfIndex Integer32,
ospfNewCfgLoopIfArea INTEGER,
ospfNewCfgLoopIfStatus INTEGER,
ospfNewCfgLoopIfDelete INTEGER
}
ospfNewCfgLoopIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF loopback interface number for which
the OSPF Loopback Interface table is related."
::= { ospfNewCfgLoopIfEntry 1}
ospfNewCfgLoopIfArea OBJECT-TYPE
SYNTAX INTEGER (0..5)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the area that the loopback interface belongs (0..5)"
::= { ospfNewCfgLoopIfEntry 2 }
ospfNewCfgLoopIfStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of the loopback interface
disabled(0),
enabled(1)"
::= { ospfNewCfgLoopIfEntry 3 }
ospfNewCfgLoopIfDelete OBJECT-TYPE
SYNTAX INTEGER {
other(0),
delete(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete the loopback interface
other(0),
delete(1)"
::= { ospfNewCfgLoopIfEntry 4 }
ospfCurCfgVirtIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfCurCfgVirtIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Virtual Interface configuration in the current
configuration."
::= { ospfCfg 9 }
ospfCurCfgVirtIntfEntry OBJECT-TYPE
SYNTAX OspfCurCfgVirtIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF virtual Interface."
INDEX { ospfCurCfgVirtIntfIndex }
::= { ospfCurCfgVirtIntfTable 1 }
OspfCurCfgVirtIntfEntry ::= SEQUENCE {
ospfCurCfgVirtIntfIndex Integer32,
ospfCurCfgVirtIntfAreaId INTEGER,
ospfCurCfgVirtIntfNbr IpAddress,
ospfCurCfgVirtIntfMdkey INTEGER,
ospfCurCfgVirtIntfHello INTEGER,
ospfCurCfgVirtIntfHelloMS INTEGER,
ospfCurCfgVirtIntfDead INTEGER,
ospfCurCfgVirtIntfDeadMS INTEGER,
ospfCurCfgVirtIntfTrans INTEGER,
ospfCurCfgVirtIntfRetra INTEGER,
ospfCurCfgVirtIntfAuthKey DisplayString,
ospfCurCfgVirtIntfStatus INTEGER
}
ospfCurCfgVirtIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Virtual Interface number for which the OSPF
Virtual Interface table is related."
::= { ospfCurCfgVirtIntfEntry 1}
ospfCurCfgVirtIntfAreaId OBJECT-TYPE
SYNTAX INTEGER (0..19)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the OSPF area to which this virtual interface
belongs."
::= { ospfCurCfgVirtIntfEntry 2 }
ospfCurCfgVirtIntfNbr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the OSPF neighbor for this virtual interface."
::= { ospfCurCfgVirtIntfEntry 3 }
ospfCurCfgVirtIntfMdkey OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MD5 key for the OSPF virtual interface
0 (none) no MD5 authentication."
::= { ospfCurCfgVirtIntfEntry 4 }
ospfCurCfgVirtIntfHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hello interval"
::= { ospfCurCfgVirtIntfEntry 5 }
ospfCurCfgVirtIntfHelloMS OBJECT-TYPE
SYNTAX INTEGER {
seconds(0),
milliseconds(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Units of time measurement for Hello interval
seconds(0),
milliseconds(1)"
::= { ospfCurCfgVirtIntfEntry 6 }
ospfCurCfgVirtIntfDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dead interval"
::= { ospfCurCfgVirtIntfEntry 7 }
ospfCurCfgVirtIntfDeadMS OBJECT-TYPE
SYNTAX INTEGER {
seconds(0),
milliseconds(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Units of time measurement for Dead interval
seconds(0),
milliseconds(1)"
::= { ospfCurCfgVirtIntfEntry 8 }
ospfCurCfgVirtIntfTrans OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transit delay"
::= { ospfCurCfgVirtIntfEntry 9 }
ospfCurCfgVirtIntfRetra OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Retransmit interval"
::= { ospfCurCfgVirtIntfEntry 10 }
ospfCurCfgVirtIntfAuthKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication Key"
::= { ospfCurCfgVirtIntfEntry 11 }
ospfCurCfgVirtIntfStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status
disabled(0),
enabled(1)"
::= { ospfCurCfgVirtIntfEntry 12 }
ospfNewCfgVirtIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfNewCfgVirtIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Virtual interface in the new configuration block."
::= { ospfCfg 10 }
ospfNewCfgVirtIntfEntry OBJECT-TYPE
SYNTAX OspfNewCfgVirtIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF virtual interface."
INDEX { ospfNewCfgVirtIntfIndex }
::= { ospfNewCfgVirtIntfTable 1 }
OspfNewCfgVirtIntfEntry ::= SEQUENCE {
ospfNewCfgVirtIntfIndex Integer32,
ospfNewCfgVirtIntfAreaId INTEGER,
ospfNewCfgVirtIntfNbr IpAddress,
ospfNewCfgVirtIntfMdkey INTEGER,
ospfNewCfgVirtIntfHello INTEGER,
ospfNewCfgVirtIntfHelloMS INTEGER,
ospfNewCfgVirtIntfDead INTEGER,
ospfNewCfgVirtIntfDeadMS INTEGER,
ospfNewCfgVirtIntfTrans INTEGER,
ospfNewCfgVirtIntfRetra INTEGER,
ospfNewCfgVirtIntfAuthKey DisplayString,
ospfNewCfgVirtIntfStatus INTEGER,
ospfNewCfgVirtIntfDelete INTEGER
}
ospfNewCfgVirtIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Virtual Interface number for which the OSPF
Virtual Interface table is related."
::= { ospfNewCfgVirtIntfEntry 1}
ospfNewCfgVirtIntfAreaId OBJECT-TYPE
SYNTAX INTEGER (0..19)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the OSPF area to which this virtual interface
belongs."
::= { ospfNewCfgVirtIntfEntry 2 }
ospfNewCfgVirtIntfNbr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Address of the OSPF neighbor for this virtual interface."
::= { ospfNewCfgVirtIntfEntry 3 }
ospfNewCfgVirtIntfMdkey OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MD5 key for the OSPF virtual interface
0 (none) no MD5 authentication."
::= { ospfNewCfgVirtIntfEntry 4 }
ospfNewCfgVirtIntfHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Hello interval(1..65535s | 50..65535ms)"
::= { ospfNewCfgVirtIntfEntry 5 }
ospfNewCfgVirtIntfHelloMS OBJECT-TYPE
SYNTAX INTEGER {
seconds(0),
milliseconds(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Units of time measurement fo Hello interval
seconds(0),
milliseconds(1) "
::= { ospfNewCfgVirtIntfEntry 6 }
ospfNewCfgVirtIntfDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Dead interval(1..65535s | 1000..65535ms)"
::= { ospfNewCfgVirtIntfEntry 7 }
ospfNewCfgVirtIntfDeadMS OBJECT-TYPE
SYNTAX INTEGER {
seconds(0),
milliseconds(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Units of time measurement fo Dead interval
seconds(0),
milliseconds(1) "
::= { ospfNewCfgVirtIntfEntry 8 }
ospfNewCfgVirtIntfTrans OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Transit delay(1..3600)"
::= { ospfNewCfgVirtIntfEntry 9 }
ospfNewCfgVirtIntfRetra OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Retransmit interval(1..3600)"
::= { ospfNewCfgVirtIntfEntry 10 }
ospfNewCfgVirtIntfAuthKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Authentication Key SIZE(0..8)"
::= { ospfNewCfgVirtIntfEntry 11 }
ospfNewCfgVirtIntfStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status
disabled(0),
enabled(1) "
::= { ospfNewCfgVirtIntfEntry 12 }
ospfNewCfgVirtIntfDelete OBJECT-TYPE
SYNTAX INTEGER {
other(0),
delete(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete
other(0),
delete(1)"
::= { ospfNewCfgVirtIntfEntry 13 }
-- ospf range
ospfCurCfgRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfCurCfgRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF summary range in the current configuration."
::= { ospfCfg 14 }
ospfCurCfgRangeEntry OBJECT-TYPE
SYNTAX OspfCurCfgRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF summary range."
INDEX { ospfCurCfgRangeIndex }
::= { ospfCurCfgRangeTable 1 }
OspfCurCfgRangeEntry ::= SEQUENCE {
ospfCurCfgRangeIndex Integer32,
ospfCurCfgRangeAddr IpAddress,
ospfCurCfgRangeMask IpAddress,
ospfCurCfgRangeAreaIndex Integer32,
ospfCurCfgRangeHideState INTEGER,
ospfCurCfgRangeState INTEGER
}
ospfCurCfgRangeIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The range number for which the OSPF summary range table is related."
::= { ospfCurCfgRangeEntry 1}
ospfCurCfgRangeAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the range."
::= { ospfCurCfgRangeEntry 2 }
ospfCurCfgRangeMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask of the range."
::= { ospfCurCfgRangeEntry 3 }
ospfCurCfgRangeAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The area index."
::= { ospfCurCfgRangeEntry 4 }
ospfCurCfgRangeHideState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the hide range."
::= { ospfCurCfgRangeEntry 5 }
ospfCurCfgRangeState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the range."
::= { ospfCurCfgRangeEntry 6 }
ospfNewCfgRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfNewCfgRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF summary range in the new configuration."
::= { ospfCfg 15 }
ospfNewCfgRangeEntry OBJECT-TYPE
SYNTAX OspfNewCfgRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF summary range."
INDEX { ospfNewCfgRangeIndex }
::= { ospfNewCfgRangeTable 1 }
OspfNewCfgRangeEntry ::= SEQUENCE {
ospfNewCfgRangeIndex Integer32,
ospfNewCfgRangeAddr IpAddress,
ospfNewCfgRangeMask IpAddress,
ospfNewCfgRangeAreaIndex Integer32,
ospfNewCfgRangeHideState INTEGER,
ospfNewCfgRangeState INTEGER,
ospfNewCfgRangeDelete INTEGER
}
ospfNewCfgRangeIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The range number for which the OSPF summary range table is related."
::= { ospfNewCfgRangeEntry 1}
ospfNewCfgRangeAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Address of the range."
::= { ospfNewCfgRangeEntry 2 }
ospfNewCfgRangeMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mask of the range."
::= { ospfNewCfgRangeEntry 3 }
ospfNewCfgRangeAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The area index."
::= { ospfNewCfgRangeEntry 4 }
ospfNewCfgRangeHideState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the hide range."
::= { ospfNewCfgRangeEntry 5 }
ospfNewCfgRangeState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the range."
::= { ospfNewCfgRangeEntry 6 }
ospfNewCfgRangeDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { ospfNewCfgRangeEntry 7 }
ospfRouteRedistribution OBJECT IDENTIFIER ::= { ospfCfg 4 }
ospfRedistributeStatic OBJECT IDENTIFIER ::= { ospfRouteRedistribution 1 }
ospfCurCfgStaticMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric to be assigned to static routes."
::= { ospfRedistributeStatic 1 }
ospfNewCfgStaticMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The metric to be assigned to static routes."
::= { ospfRedistributeStatic 2 }
ospfCurCfgStaticMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS External metric type for static routes."
::= { ospfRedistributeStatic 3 }
ospfNewCfgStaticMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AS External metric type for static routes."
::= { ospfRedistributeStatic 4 }
ospfCurCfgStaticOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ospfRedistributeStatic 5 }
ospfNewCfgStaticOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ospfRedistributeStatic 6 }
ospfNewCfgStaticAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read, 0 is returned."
::= { ospfRedistributeStatic 7 }
ospfNewCfgStaticRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { ospfRedistributeStatic 8 }
ospfRedistributeEbgp OBJECT IDENTIFIER ::= { ospfRouteRedistribution 2 }
ospfCurCfgEbgpMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The export metric to be assigned to External BGP routes."
::= { ospfRedistributeEbgp 1 }
ospfNewCfgEbgpMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The export metric to be assigned to External BGP routes."
::= { ospfRedistributeEbgp 2 }
ospfCurCfgEbgpMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS External metric type for External BGP routes."
::= { ospfRedistributeEbgp 3 }
ospfNewCfgEbgpMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AS External metric type for External BGP routes."
::= { ospfRedistributeEbgp 4 }
ospfCurCfgEbgpOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ospfRedistributeEbgp 5 }
ospfNewCfgEbgpOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ospfRedistributeEbgp 6 }
ospfNewCfgEbgpAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read, 0 is returned."
::= { ospfRedistributeEbgp 7 }
ospfNewCfgEbgpRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { ospfRedistributeEbgp 8 }
ospfRedistributeIbgp OBJECT IDENTIFIER ::= { ospfRouteRedistribution 3 }
ospfCurCfgIbgpMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The export metric for Internal BGP routes."
::= { ospfRedistributeIbgp 1 }
ospfNewCfgIbgpMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The export metric for Internal BGP routes."
::= { ospfRedistributeIbgp 2 }
ospfCurCfgIbgpMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS External metric type for Internal BGP routes."
::= { ospfRedistributeIbgp 3 }
ospfNewCfgIbgpMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AS External metric type for Internal BGP routes."
::= { ospfRedistributeIbgp 4 }
ospfCurCfgIbgpOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ospfRedistributeIbgp 5 }
ospfNewCfgIbgpOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ospfRedistributeIbgp 6 }
ospfNewCfgIbgpAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read, 0 is returned."
::= { ospfRedistributeIbgp 7 }
ospfNewCfgIbgpRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { ospfRedistributeIbgp 8 }
ospfRedistributeFixed OBJECT IDENTIFIER ::= { ospfRouteRedistribution 4 }
ospfCurCfgFixedMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The export metric for fixed routes."
::= { ospfRedistributeFixed 1 }
ospfNewCfgFixedMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The export metric for fixed routes."
::= { ospfRedistributeFixed 2 }
ospfCurCfgFixedMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS External metric type for fixed routes."
::= { ospfRedistributeFixed 3 }
ospfNewCfgFixedMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AS External metric type for fixed routes."
::= { ospfRedistributeFixed 4 }
ospfCurCfgFixedOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ospfRedistributeFixed 5 }
ospfNewCfgFixedOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ospfRedistributeFixed 6 }
ospfNewCfgFixedAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read, 0 is returned."
::= { ospfRedistributeFixed 7 }
ospfNewCfgFixedRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { ospfRedistributeFixed 8 }
ospfRedistributeRip OBJECT IDENTIFIER ::= { ospfRouteRedistribution 5 }
ospfCurCfgRipMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The export metric for RIP routes. "
::= { ospfRedistributeRip 1 }
ospfNewCfgRipMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777214)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The export metric for RIP routes. "
::= { ospfRedistributeRip 2 }
ospfCurCfgRipMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS External metric type for RIP routes."
::= { ospfRedistributeRip 3 }
ospfNewCfgRipMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AS External metric type for RIP routes."
::= { ospfRedistributeRip 4 }
ospfCurCfgRipOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ospfRedistributeRip 5 }
ospfNewCfgRipOutRmapList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selected"
::= { ospfRedistributeRip 6 }
ospfNewCfgRipAddOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be add into out-rmap list. When read, 0 is returned."
::= { ospfRedistributeRip 7 }
ospfNewCfgRipRemoveOutRmap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route map to be removed from out-rmap list. When read,
0 is returned."
::= { ospfRedistributeRip 8 }
--
-- IP OSPFv3 configuration
--
ospf3General OBJECT IDENTIFIER ::= { ospf3Cfg 1 }
ospf3IntfTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPFv3 Interface table."
::= { ospf3General 1 }
ospf3AreaTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPFv3 Area table."
::= { ospf3General 2 }
ospf3RangeTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPFv3 Range table."
::= { ospf3General 3 }
ospf3ExtRangeTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPFv3 Summary Prefix table."
::= { ospf3General 4 }
ospf3RedistTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPFv3 Redist Config table."
::= { ospf3General 5 }
ospf3VirtIntfTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPFv3 Virtual Interface
table."
::= { ospf3General 6 }
ospf3HostTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPFv3 Host table."
::= { ospf3General 7 }
ospf3NbrTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the OSPFv3 Neighbor table."
::= { ospf3General 8 }
ospf3CurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPFv3 global state."
::= { ospf3General 9 }
ospf3NewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Globally turn OSPFv3 on or off."
::= { ospf3General 10 }
ospf3CurCfgRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The router ID."
::= { ospf3General 11 }
ospf3NewCfgRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The router ID."
::= { ospf3General 12 }
ospf3CurCfgAbrType OBJECT-TYPE
SYNTAX INTEGER {
standard(1),
cisco(2),
ibm(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPFv3 alternative ABR type."
::= { ospf3General 13 }
ospf3NewCfgAbrType OBJECT-TYPE
SYNTAX INTEGER {
standard(1),
cisco(2),
ibm(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the OSPFv3 alternative ABR type."
::= { ospf3General 14 }
ospf3CurCfgLSDB OBJECT-TYPE
SYNTAX INTEGER (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LSDB limit for external LSA."
::= { ospf3General 15 }
ospf3NewCfgLSDB OBJECT-TYPE
SYNTAX INTEGER (-1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the LSDB limit for external LSA, -1 for none."
::= { ospf3General 16 }
ospf3CurCfgExitOverflow OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The exit overflow interval in seconds."
::= { ospf3General 17 }
ospf3NewCfgExitOverflow OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the exit overflow interval in seconds."
::= { ospf3General 18 }
ospf3CurCfgReferenceBw OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reference bandwidth for default interface metric calculation."
::= { ospf3General 19 }
ospf3NewCfgReferenceBw OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The reference bandwidth for default interface metric calculation."
::= { ospf3General 20 }
ospf3CurCfgSpfDelay OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The delay between topology change and SPF calculation."
::= { ospf3General 21 }
ospf3NewCfgSpfDelay OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The delay between topology change and SPF calculation."
::= { ospf3General 22 }
ospf3CurCfgSpfHold OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hold time between two consecutive SPF calculation."
::= { ospf3General 23 }
ospf3NewCfgSpfHold OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hold time between two consecutive SPF calculation."
::= { ospf3General 24 }
ospf3CurCfgNssaAsbrDfRtTrans OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPFv3 state of setting P-bit by an NSSA internal ASBR."
::= { ospf3General 29 }
ospf3NewCfgNssaAsbrDfRtTrans OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"OSPFv3 state of setting P-bit by an NSSA internal ASBR."
::= { ospf3General 30 }
ospf3CurCfgAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3CurCfgAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 area in the current configuration block."
::= { ospf3Cfg 2 }
ospf3CurCfgAreaEntry OBJECT-TYPE
SYNTAX Ospf3CurCfgAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPFv3 area."
INDEX { ospf3CurCfgAreaIndex }
::= { ospf3CurCfgAreaTable 1 }
Ospf3CurCfgAreaEntry ::= SEQUENCE {
ospf3CurCfgAreaIndex Integer32,
ospf3CurCfgAreaId IpAddress,
ospf3CurCfgAreaStbInterval INTEGER,
ospf3CurCfgAreaType INTEGER,
ospf3CurCfgAreaNoSumm INTEGER,
ospf3CurCfgAreaDefaultMetric INTEGER,
ospf3CurCfgAreaDefaultMetricType INTEGER,
ospf3CurCfgAreaTranslRole INTEGER,
ospf3CurCfgAreaStatus INTEGER
}
ospf3CurCfgAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 area number for which the OSPFv3 area table is related."
::= { ospf3CurCfgAreaEntry 1}
ospf3CurCfgAreaId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the OSPFv3 area."
::= { ospf3CurCfgAreaEntry 2 }
ospf3CurCfgAreaStbInterval OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The stability interval for the NSSA area"
::= { ospf3CurCfgAreaEntry 3 }
ospf3CurCfgAreaType OBJECT-TYPE
SYNTAX INTEGER {
transit(1),
stub(2),
nssa(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of Area.
transit(1)
stub(2)
nssa(3)"
::= { ospf3CurCfgAreaEntry 4 }
ospf3CurCfgAreaNoSumm OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status
disabled(0)
enabled(1)"
::= { ospf3CurCfgAreaEntry 5 }
ospf3CurCfgAreaDefaultMetric OBJECT-TYPE
SYNTAX INTEGER (1..16777215)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Metric for stub/NSSA area (1-16777215)"
::= { ospf3CurCfgAreaEntry 6 }
ospf3CurCfgAreaDefaultMetricType OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Metric Type for stub/NSSA area (1-3)"
::= { ospf3CurCfgAreaEntry 7 }
ospf3CurCfgAreaTranslRole OBJECT-TYPE
SYNTAX INTEGER {
always(1),
candidate(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Translation role for the NSSA area.
always(1)
candidate(2)"
::= { ospf3CurCfgAreaEntry 8 }
ospf3CurCfgAreaStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status
disabled(0)
enabled(1)"
::= { ospf3CurCfgAreaEntry 9 }
ospf3NewCfgAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3NewCfgAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 Area configuration in the new configuration block."
::= { ospf3Cfg 3 }
ospf3NewCfgAreaEntry OBJECT-TYPE
SYNTAX Ospf3NewCfgAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPFv3 area."
INDEX { ospf3NewCfgAreaIndex }
::= { ospf3NewCfgAreaTable 1 }
Ospf3NewCfgAreaEntry ::= SEQUENCE {
ospf3NewCfgAreaIndex Integer32,
ospf3NewCfgAreaId IpAddress,
ospf3NewCfgAreaStbInterval INTEGER,
ospf3NewCfgAreaType INTEGER,
ospf3NewCfgAreaNoSumm INTEGER,
ospf3NewCfgAreaDefaultMetric INTEGER,
ospf3NewCfgAreaDefaultMetricType INTEGER,
ospf3NewCfgAreaTranslRole INTEGER,
ospf3NewCfgAreaStatus INTEGER,
ospf3NewCfgAreaDelete INTEGER
}
ospf3NewCfgAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 area number for which the OSPFv3 area table is related."
::= { ospf3NewCfgAreaEntry 1}
ospf3NewCfgAreaId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Address of the OSPFv3 area."
::= { ospf3NewCfgAreaEntry 2 }
ospf3NewCfgAreaStbInterval OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Stability interval for the NSSA area."
::= { ospf3NewCfgAreaEntry 3 }
ospf3NewCfgAreaType OBJECT-TYPE
SYNTAX INTEGER {
transit(1),
stub(2),
nssa(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of Area.
transit(1)
stub(2)
nssa(3)"
::= { ospf3NewCfgAreaEntry 4 }
ospf3NewCfgAreaNoSumm OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status
disabled(0)
enabled(1)"
::= { ospf3NewCfgAreaEntry 5 }
ospf3NewCfgAreaDefaultMetric OBJECT-TYPE
SYNTAX INTEGER (1..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Metric for stub/NSSA area (1-16777215)"
::= { ospf3NewCfgAreaEntry 6 }
ospf3NewCfgAreaDefaultMetricType OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Metric Type for stub/NSSA area (1-3)"
::= { ospf3NewCfgAreaEntry 7 }
ospf3NewCfgAreaTranslRole OBJECT-TYPE
SYNTAX INTEGER {
always(1),
candidate(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Translation role for the NSSA area.
always(1)
candidate(2)"
::= { ospf3NewCfgAreaEntry 8 }
ospf3NewCfgAreaStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status
disabled(0)
enabled(1)"
::= { ospf3NewCfgAreaEntry 9 }
ospf3NewCfgAreaDelete OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete the area
no(0),
yes(1)"
::= { ospf3NewCfgAreaEntry 10 }
-- OSPFv3 Host Table
ospf3CurCfgHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3CurCfgHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 Host configuration."
::= { ospf3Cfg 4 }
ospf3CurCfgHostEntry OBJECT-TYPE
SYNTAX Ospf3CurCfgHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPFv3 host."
INDEX { ospf3CurCfgHostIndex }
::= { ospf3CurCfgHostTable 1 }
Ospf3CurCfgHostEntry ::= SEQUENCE {
ospf3CurCfgHostIndex Integer32,
ospf3CurCfgHostIpAddr DisplayString,
ospf3CurCfgHostAreaIndex Integer32,
ospf3CurCfgHostCost INTEGER,
ospf3CurCfgHostState INTEGER
}
ospf3CurCfgHostIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 host number for which the OSPFv3 host table is related."
::= { ospf3CurCfgHostEntry 1}
ospf3CurCfgHostIpAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 Address of the OSPFv3 host."
::= { ospf3CurCfgHostEntry 2 }
ospf3CurCfgHostAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The area index."
::= { ospf3CurCfgHostEntry 3 }
ospf3CurCfgHostCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the OSPFv3 host."
::= { ospf3CurCfgHostEntry 4 }
ospf3CurCfgHostState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable an OSPFv3 Host"
::= { ospf3CurCfgHostEntry 5 }
ospf3NewCfgHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3NewCfgHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 Host configuration."
::= { ospf3Cfg 5 }
ospf3NewCfgHostEntry OBJECT-TYPE
SYNTAX Ospf3NewCfgHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPFv3 host."
INDEX { ospf3NewCfgHostIndex }
::= { ospf3NewCfgHostTable 1 }
Ospf3NewCfgHostEntry ::= SEQUENCE {
ospf3NewCfgHostIndex Integer32,
ospf3NewCfgHostIpAddr DisplayString,
ospf3NewCfgHostAreaIndex Integer32,
ospf3NewCfgHostCost INTEGER,
ospf3NewCfgHostState INTEGER,
ospf3NewCfgHostDelete INTEGER
}
ospf3NewCfgHostIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 host number for which the OSPFv3 host table is related."
::= { ospf3NewCfgHostEntry 1}
ospf3NewCfgHostIpAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP6 Address of the OSPFv3 host.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
::= { ospf3NewCfgHostEntry 2 }
ospf3NewCfgHostAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The OSPFv3 area index."
::= { ospf3NewCfgHostEntry 3 }
ospf3NewCfgHostCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The cost of the OSPFv3 host."
::= { ospf3NewCfgHostEntry 4 }
ospf3NewCfgHostState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable an OSPFv3 Host"
::= { ospf3NewCfgHostEntry 5 }
ospf3NewCfgHostDelete OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete the OSPFv3 host:
no(0),
yes(1)"
::= { ospf3NewCfgHostEntry 6 }
-- OSPFv3 Neighbor Table
ospf3CurCfgNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3CurCfgNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 Neighbor configuration."
::= { ospf3Cfg 6 }
ospf3CurCfgNbrEntry OBJECT-TYPE
SYNTAX Ospf3CurCfgNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPFv3 neighbor."
INDEX { ospf3CurCfgNbrIndex }
::= { ospf3CurCfgNbrTable 1 }
Ospf3CurCfgNbrEntry ::= SEQUENCE {
ospf3CurCfgNbrIndex Integer32,
ospf3CurCfgNbrIpAddr DisplayString,
ospf3CurCfgNbrIntfIndex Integer32,
ospf3CurCfgNbrPriority INTEGER,
ospf3CurCfgNbrState INTEGER
}
ospf3CurCfgNbrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 neighbor number for which the OSPFv3 neighbor table is related."
::= { ospf3CurCfgNbrEntry 1}
ospf3CurCfgNbrIpAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 Address of the OSPFv3 neighbor."
::= { ospf3CurCfgNbrEntry 2 }
ospf3CurCfgNbrIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index."
::= { ospf3CurCfgNbrEntry 3 }
ospf3CurCfgNbrPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority of the OSPFv3 neighbor."
::= { ospf3CurCfgNbrEntry 4 }
ospf3CurCfgNbrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable an OSPFv3 neighbor"
::= { ospf3CurCfgNbrEntry 5 }
ospf3NewCfgNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3NewCfgNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 Neighbor configuration."
::= { ospf3Cfg 7 }
ospf3NewCfgNbrEntry OBJECT-TYPE
SYNTAX Ospf3NewCfgNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPFv3 neighbor."
INDEX { ospf3NewCfgNbrIndex }
::= { ospf3NewCfgNbrTable 1 }
Ospf3NewCfgNbrEntry ::= SEQUENCE {
ospf3NewCfgNbrIndex Integer32,
ospf3NewCfgNbrIpAddr DisplayString,
ospf3NewCfgNbrIntfIndex Integer32,
ospf3NewCfgNbrPriority INTEGER,
ospf3NewCfgNbrState INTEGER,
ospf3NewCfgNbrDelete INTEGER
}
ospf3NewCfgNbrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 neighbor number for which the OSPFv3 neighbor table is related."
::= { ospf3NewCfgNbrEntry 1}
ospf3NewCfgNbrIpAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP6 Address of the OSPFv3 neighbor.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
::= { ospf3NewCfgNbrEntry 2 }
ospf3NewCfgNbrIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The OSPFv3 interface index."
::= { ospf3NewCfgNbrEntry 3 }
ospf3NewCfgNbrPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The cost of the OSPFv3 neighbor."
::= { ospf3NewCfgNbrEntry 4 }
ospf3NewCfgNbrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable an OSPFv3 Neighbor"
::= { ospf3NewCfgNbrEntry 5 }
ospf3NewCfgNbrDelete OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete the OSPFv3 neighbor:
no(0),
yes(1)"
::= { ospf3NewCfgNbrEntry 6 }
ospf3CurCfgIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3CurCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 Interface in the current configuration block."
::= { ospf3Cfg 8 }
ospf3CurCfgIntfEntry OBJECT-TYPE
SYNTAX Ospf3CurCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPFv3 Interface."
INDEX { ospf3CurCfgIntfIndex }
::= { ospf3CurCfgIntfTable 1 }
Ospf3CurCfgIntfEntry ::= SEQUENCE {
ospf3CurCfgIntfIndex Integer32,
ospf3CurCfgIntfInstId INTEGER,
ospf3CurCfgIntfArea INTEGER,
ospf3CurCfgIntfCost INTEGER,
ospf3CurCfgIntfPrio INTEGER,
ospf3CurCfgIntfHello INTEGER,
ospf3CurCfgIntfDead INTEGER,
ospf3CurCfgIntfPoll Unsigned32,
ospf3CurCfgIntfTrans INTEGER,
ospf3CurCfgIntfRetra INTEGER,
ospf3CurCfgIntfPassive INTEGER,
ospf3CurCfgIntfNetworkType INTEGER,
ospf3CurCfgIntfStatus INTEGER
,
ospf3CurCfgIntfAuthSpi Unsigned32,
ospf3CurCfgIntfAuthEnable INTEGER,
ospf3CurCfgIntfAuthType INTEGER,
ospf3CurCfgIntfAuthKey OCTET STRING,
ospf3CurCfgIntfEncrySpi Unsigned32,
ospf3CurCfgIntfEncryEnable INTEGER,
ospf3CurCfgIntfEncryType INTEGER,
ospf3CurCfgIntfEncryKey OCTET STRING,
ospf3CurCfgIntfEncryAuthType INTEGER,
ospf3CurCfgIntfEncryAuthKey OCTET STRING
,
ospf3CurCfgIntfLsaSupress INTEGER
}
ospf3CurCfgIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 Interface number for which the OSPFv3 Interface table is
related."
::= { ospf3CurCfgIntfEntry 1}
ospf3CurCfgIntfInstId OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface Instance Id"
::= { ospf3CurCfgIntfEntry 2 }
ospf3CurCfgIntfArea OBJECT-TYPE
SYNTAX INTEGER (0..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the area that the interface belongs"
::= { ospf3CurCfgIntfEntry 3 }
ospf3CurCfgIntfCost OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface cost"
::= { ospf3CurCfgIntfEntry 4 }
ospf3CurCfgIntfPrio OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface router priority"
::= { ospf3CurCfgIntfEntry 5 }
ospf3CurCfgIntfHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hello interval"
::= { ospf3CurCfgIntfEntry 6 }
ospf3CurCfgIntfDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dead interval"
::= { ospf3CurCfgIntfEntry 7 }
ospf3CurCfgIntfPoll OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Poll interval(1..4294967295)"
::= { ospf3CurCfgIntfEntry 8 }
ospf3CurCfgIntfTrans OBJECT-TYPE
SYNTAX INTEGER (1..1800)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit delay"
::= { ospf3CurCfgIntfEntry 9 }
ospf3CurCfgIntfRetra OBJECT-TYPE
SYNTAX INTEGER (1..1800)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Retransmit interval"
::= { ospf3CurCfgIntfEntry 10 }
ospf3CurCfgIntfPassive OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Passive interface
disabled(0),
enabled(1)"
::= { ospf3CurCfgIntfEntry 11 }
ospf3CurCfgIntfNetworkType OBJECT-TYPE
SYNTAX INTEGER {
broadcast(1),
non-broadcast(2),
point-to-point(3),
point-to-multipoint(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Network Type.
broadcast(1),
non-broadcast(2),
point-to-point(3),
point-to-multipoint(4)"
::= { ospf3CurCfgIntfEntry 12 }
ospf3CurCfgIntfStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the interface
disabled(0),
enabled(1)"
::= { ospf3CurCfgIntfEntry 16 }
ospf3CurCfgIntfAuthSpi OBJECT-TYPE
SYNTAX Unsigned32 (256..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Spi Id(256 - 4294967295)"
::= { ospf3CurCfgIntfEntry 17 }
ospf3CurCfgIntfAuthEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status
disabled(0),
enabled(1)"
::= { ospf3CurCfgIntfEntry 18 }
ospf3CurCfgIntfAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
md5(2),
sha1(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication Type
none(0),
md5(2),
sha1(1)"
::= { ospf3CurCfgIntfEntry 19 }
ospf3CurCfgIntfAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication Key
Hex-string MD5 key - 32 chars (128 bits)
Hex-string SHA-1 key - 40 chars (160 bits)"
::= { ospf3CurCfgIntfEntry 20 }
ospf3CurCfgIntfEncrySpi OBJECT-TYPE
SYNTAX Unsigned32 (256..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Spi Id(256 - 4294967295)"
::= { ospf3CurCfgIntfEntry 21 }
ospf3CurCfgIntfEncryEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status
disabled(0),
enabled(1)"
::= { ospf3CurCfgIntfEntry 22 }
ospf3CurCfgIntfEncryType OBJECT-TYPE
SYNTAX INTEGER {
null(0),
tripledes(2),
aes(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Encryption Type
null(0),
3des(2),
aes(3)"
::= { ospf3CurCfgIntfEntry 23 }
ospf3CurCfgIntfEncryKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Encryption Key
Hex-string AES key - 32 chars (128 bits)
Hex-string 3DES key - 48 chars (192 bits)"
::= { ospf3CurCfgIntfEntry 24 }
ospf3CurCfgIntfEncryAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
md5(2),
sha1(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Encryption Authentication Type
none(0),
md5(2),
sha1(1)"
::= { ospf3CurCfgIntfEntry 25 }
ospf3CurCfgIntfEncryAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Encryption Authentication Key
Hex-string MD5 key - 32 chars (128 bits)
Hex-string SHA-1 key - 40 chars (160 bits)"
::= { ospf3CurCfgIntfEntry 26 }
ospf3CurCfgIntfLsaSupress OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LSA Supression on interface
disabled(0),
enabled(1)"
::= { ospf3CurCfgIntfEntry 27 }
ospf3NewCfgIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3NewCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 interface in the new configuration block."
::= { ospf3Cfg 9 }
ospf3NewCfgIntfEntry OBJECT-TYPE
SYNTAX Ospf3NewCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPFv3 interface."
INDEX { ospf3NewCfgIntfIndex }
::= { ospf3NewCfgIntfTable 1 }
Ospf3NewCfgIntfEntry ::= SEQUENCE {
ospf3NewCfgIntfIndex Integer32,
ospf3NewCfgIntfInstId INTEGER,
ospf3NewCfgIntfArea INTEGER,
ospf3NewCfgIntfCost INTEGER,
ospf3NewCfgIntfPrio INTEGER,
ospf3NewCfgIntfHello INTEGER,
ospf3NewCfgIntfPoll Unsigned32,
ospf3NewCfgIntfDead INTEGER,
ospf3NewCfgIntfTrans INTEGER,
ospf3NewCfgIntfRetra INTEGER,
ospf3NewCfgIntfPassive INTEGER,
ospf3NewCfgIntfNetworkType INTEGER,
ospf3NewCfgIntfStatus INTEGER,
ospf3NewCfgIntfDelete INTEGER
,
ospf3NewCfgIntfAuthSpi Unsigned32,
ospf3NewCfgIntfAuthEnable INTEGER,
ospf3NewCfgIntfAuthType INTEGER,
ospf3NewCfgIntfAuthKey OCTET STRING,
ospf3NewCfgIntfAuthReset INTEGER,
ospf3NewCfgIntfEncrySpi Unsigned32,
ospf3NewCfgIntfEncryEnable INTEGER,
ospf3NewCfgIntfEncryType INTEGER,
ospf3NewCfgIntfEncryKey OCTET STRING,
ospf3NewCfgIntfEncryAuthType INTEGER,
ospf3NewCfgIntfEncryAuthKey OCTET STRING,
ospf3NewCfgIntfEncryReset INTEGER
,
ospf3NewCfgIntfLsaSupress INTEGER
}
ospf3NewCfgIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 Interface number for which the OSPFv3 Interface table is
related."
::= { ospf3NewCfgIntfEntry 1}
ospf3NewCfgIntfInstId OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interface Instance Id (0..255)"
::= { ospf3NewCfgIntfEntry 2 }
ospf3NewCfgIntfArea OBJECT-TYPE
SYNTAX INTEGER (0..5)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the area that the interface belongs (0..5)"
::= { ospf3NewCfgIntfEntry 3 }
ospf3NewCfgIntfCost OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interface cost(1..65535) and 0 for none"
::= { ospf3NewCfgIntfEntry 4 }
ospf3NewCfgIntfPrio OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interface router priority(0..255)"
::= { ospf3NewCfgIntfEntry 5 }
ospf3NewCfgIntfHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Hello interval(1..65535)"
::= { ospf3NewCfgIntfEntry 6 }
ospf3NewCfgIntfDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Dead interval(1..65535)"
::= { ospf3NewCfgIntfEntry 7 }
ospf3NewCfgIntfPoll OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Poll interval(1..4294967295)"
::= { ospf3NewCfgIntfEntry 8 }
ospf3NewCfgIntfTrans OBJECT-TYPE
SYNTAX INTEGER (1..1800)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Transmit delay(1..1800)"
::= { ospf3NewCfgIntfEntry 9 }
ospf3NewCfgIntfRetra OBJECT-TYPE
SYNTAX INTEGER (1..1800)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Retransmit interval(1..1800)"
::= { ospf3NewCfgIntfEntry 10 }
ospf3NewCfgIntfPassive OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Passive interface
disabled(0),
enabled(1)"
::= { ospf3NewCfgIntfEntry 11 }
ospf3NewCfgIntfNetworkType OBJECT-TYPE
SYNTAX INTEGER {
broadcast(1),
non-broadcast(2),
point-to-point(3),
point-to-multipoint(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Network Type.
broadcast(1),
non-broadcast(2),
point-to-point(3),
point-to-multipoint(4)"
::= { ospf3NewCfgIntfEntry 12 }
ospf3NewCfgIntfStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of the interface
disabled(0),
enabled(1)"
::= { ospf3NewCfgIntfEntry 16 }
ospf3NewCfgIntfDelete OBJECT-TYPE
SYNTAX INTEGER {
other(0),
delete(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete the interface
other(0),
delete(1)"
::= { ospf3NewCfgIntfEntry 17 }
ospf3NewCfgIntfAuthSpi OBJECT-TYPE
SYNTAX Unsigned32 (256..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Spi Id(256 - 4294967295)"
::= { ospf3NewCfgIntfEntry 18 }
ospf3NewCfgIntfAuthEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Status
disabled(0),
enabled(1)"
::= { ospf3NewCfgIntfEntry 19 }
ospf3NewCfgIntfAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
md5(2),
sha1(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Type
none(0),
md5(2),
sha1(1)"
::= { ospf3NewCfgIntfEntry 20 }
ospf3NewCfgIntfAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication Type
Hex-string MD5 key - 32 chars (128 bits),
Hex-string SHA-1 key - 40 chars (160 bits)"
::= { ospf3NewCfgIntfEntry 21 }
ospf3NewCfgIntfAuthReset OBJECT-TYPE
SYNTAX INTEGER {
other(0),
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset AH configuration
other(0),
reset(1)"
::= { ospf3NewCfgIntfEntry 22 }
ospf3NewCfgIntfEncrySpi OBJECT-TYPE
SYNTAX Unsigned32 (256..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Encryption Spi Id(256 - 4294967295)"
::= { ospf3NewCfgIntfEntry 23 }
ospf3NewCfgIntfEncryEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Encryption Status
disabled(0),
enabled(1)"
::= { ospf3NewCfgIntfEntry 24 }
ospf3NewCfgIntfEncryType OBJECT-TYPE
SYNTAX INTEGER {
null(0),
tripledes(2),
aes(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Encryption Type
null(0),
3des(2),
aes(3)"
::= { ospf3NewCfgIntfEntry 25 }
ospf3NewCfgIntfEncryKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..48))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Encryption Key
Hex-string AES key - 32 chars (128 bits)
Hex-string 3DES key - 48 chars (192 bits)"
::= { ospf3NewCfgIntfEntry 26 }
ospf3NewCfgIntfEncryAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
md5(2),
sha1(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Encryption Authentication Type
none(0),
md5(2),
sha1(1)"
::= { ospf3NewCfgIntfEntry 27 }
ospf3NewCfgIntfEncryAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Encryption Authentication Key
Hex-string MD5 key - 32 chars (128 bits),
Hex-string SHA-1 key - 40 chars (160 bits)"
::= { ospf3NewCfgIntfEntry 28 }
ospf3NewCfgIntfEncryReset OBJECT-TYPE
SYNTAX INTEGER {
other(0),
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset Encryption configuration
other(0),
reset(1)"
::= { ospf3NewCfgIntfEntry 29 }
ospf3NewCfgIntfLsaSupress OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"LSA Supression on interface
disabled(0),
enabled(1)"
::= { ospf3NewCfgIntfEntry 30 }
ospf3CurCfgVirtIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3CurCfgVirtIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 Virtual Interface configuration in the current
configuration."
::= { ospf3Cfg 10 }
ospf3CurCfgVirtIntfEntry OBJECT-TYPE
SYNTAX Ospf3CurCfgVirtIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPFv3v3 virtual Interface."
INDEX { ospf3CurCfgVirtIntfIndex }
::= { ospf3CurCfgVirtIntfTable 1 }
Ospf3CurCfgVirtIntfEntry ::= SEQUENCE {
ospf3CurCfgVirtIntfIndex Integer32,
ospf3CurCfgVirtIntfAreaId INTEGER,
ospf3CurCfgVirtIntfNbr IpAddress,
ospf3CurCfgVirtIntfHello INTEGER,
ospf3CurCfgVirtIntfDead INTEGER,
ospf3CurCfgVirtIntfTrans INTEGER,
ospf3CurCfgVirtIntfRetra INTEGER,
ospf3CurCfgVirtIntfStatus INTEGER
}
ospf3CurCfgVirtIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 Virtual Interface number for which the OSPFv3
Virtual Interface table is related."
::= { ospf3CurCfgVirtIntfEntry 1}
ospf3CurCfgVirtIntfAreaId OBJECT-TYPE
SYNTAX INTEGER (0..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the OSPFv3 area to which this virtual interface
belongs."
::= { ospf3CurCfgVirtIntfEntry 3 }
ospf3CurCfgVirtIntfNbr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the OSPFv3 neighbor for this virtual interface."
::= { ospf3CurCfgVirtIntfEntry 4 }
ospf3CurCfgVirtIntfHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hello interval"
::= { ospf3CurCfgVirtIntfEntry 5 }
ospf3CurCfgVirtIntfDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dead interval"
::= { ospf3CurCfgVirtIntfEntry 6 }
ospf3CurCfgVirtIntfTrans OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit delay"
::= { ospf3CurCfgVirtIntfEntry 7 }
ospf3CurCfgVirtIntfRetra OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Retransmit interval"
::= { ospf3CurCfgVirtIntfEntry 8 }
ospf3CurCfgVirtIntfStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status
disabled(0),
enabled(1)"
::= { ospf3CurCfgVirtIntfEntry 9 }
ospf3NewCfgVirtIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3NewCfgVirtIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 Virtual interface in the new configuration block."
::= { ospf3Cfg 11 }
ospf3NewCfgVirtIntfEntry OBJECT-TYPE
SYNTAX Ospf3NewCfgVirtIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPFv3 virtual interface."
INDEX { ospf3NewCfgVirtIntfIndex }
::= { ospf3NewCfgVirtIntfTable 1 }
Ospf3NewCfgVirtIntfEntry ::= SEQUENCE {
ospf3NewCfgVirtIntfIndex Integer32,
ospf3NewCfgVirtIntfAreaId INTEGER,
ospf3NewCfgVirtIntfNbr IpAddress,
ospf3NewCfgVirtIntfHello INTEGER,
ospf3NewCfgVirtIntfDead INTEGER,
ospf3NewCfgVirtIntfTrans INTEGER,
ospf3NewCfgVirtIntfRetra INTEGER,
ospf3NewCfgVirtIntfStatus INTEGER,
ospf3NewCfgVirtIntfDelete INTEGER
}
ospf3NewCfgVirtIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 Virtual Interface number for which the OSPFv3
Virtual Interface table is related."
::= { ospf3NewCfgVirtIntfEntry 1}
ospf3NewCfgVirtIntfAreaId OBJECT-TYPE
SYNTAX INTEGER (0..5)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the OSPFv3 area to which this virtual interface
belongs."
::= { ospf3NewCfgVirtIntfEntry 3 }
ospf3NewCfgVirtIntfNbr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP Address of the OSPFv3 neighbor for this virtual interface."
::= { ospf3NewCfgVirtIntfEntry 4 }
ospf3NewCfgVirtIntfHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Hello interval(1..65535)"
::= { ospf3NewCfgVirtIntfEntry 5 }
ospf3NewCfgVirtIntfDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Dead interval(1..65535)"
::= { ospf3NewCfgVirtIntfEntry 6 }
ospf3NewCfgVirtIntfTrans OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Transmit delay(1..3600)"
::= { ospf3NewCfgVirtIntfEntry 7 }
ospf3NewCfgVirtIntfRetra OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Retransmit interval(1..3600)"
::= { ospf3NewCfgVirtIntfEntry 8 }
ospf3NewCfgVirtIntfStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status
disabled(0),
enabled(1) "
::= { ospf3NewCfgVirtIntfEntry 9 }
ospf3NewCfgVirtIntfDelete OBJECT-TYPE
SYNTAX INTEGER {
other(0),
delete(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete
other(0),
delete(1)"
::= { ospf3NewCfgVirtIntfEntry 10}
-- ospfv3 range
ospf3CurCfgRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3CurCfgRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 summary range in the current configuration."
::= { ospf3Cfg 12 }
ospf3CurCfgRangeEntry OBJECT-TYPE
SYNTAX Ospf3CurCfgRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPFv3 summary range."
INDEX { ospf3CurCfgRangeIndex }
::= { ospf3CurCfgRangeTable 1 }
Ospf3CurCfgRangeEntry ::= SEQUENCE {
ospf3CurCfgRangeIndex Integer32,
ospf3CurCfgRangeAddr DisplayString,
ospf3CurCfgRangePrefixLen INTEGER,
ospf3CurCfgRangeAreaIndex Integer32,
ospf3CurCfgRangeHideState INTEGER,
ospf3CurCfgRangeLsaType INTEGER,
ospf3CurCfgRangeRouteTag Unsigned32,
ospf3CurCfgRangeState INTEGER
}
ospf3CurCfgRangeIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The range number for which the OSPFv3 summary range table is related."
::= { ospf3CurCfgRangeEntry 1}
ospf3CurCfgRangeAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 Address of the range."
::= { ospf3CurCfgRangeEntry 2 }
ospf3CurCfgRangePrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The prefix length of the range."
::= { ospf3CurCfgRangeEntry 3 }
ospf3CurCfgRangeAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The area index."
::= { ospf3CurCfgRangeEntry 4 }
ospf3CurCfgRangeHideState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the hide range."
::= { ospf3CurCfgRangeEntry 5 }
ospf3CurCfgRangeLsaType OBJECT-TYPE
SYNTAX INTEGER {
summary(8195),
type7(8199)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LSA type for aggregation.
summary(8195),
type7(8199)"
::= { ospf3CurCfgRangeEntry 6 }
ospf3CurCfgRangeRouteTag OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route tag of the range."
::= { ospf3CurCfgRangeEntry 7 }
ospf3CurCfgRangeState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the range."
::= { ospf3CurCfgRangeEntry 8 }
ospf3NewCfgRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3NewCfgRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 summary range in the new configuration."
::= { ospf3Cfg 13 }
ospf3NewCfgRangeEntry OBJECT-TYPE
SYNTAX Ospf3NewCfgRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPFv3 summary range."
INDEX { ospf3NewCfgRangeIndex }
::= { ospf3NewCfgRangeTable 1 }
Ospf3NewCfgRangeEntry ::= SEQUENCE {
ospf3NewCfgRangeIndex Integer32,
ospf3NewCfgRangeAddr DisplayString,
ospf3NewCfgRangePrefixLen INTEGER,
ospf3NewCfgRangeAreaIndex Integer32,
ospf3NewCfgRangeHideState INTEGER,
ospf3NewCfgRangeLsaType INTEGER,
ospf3NewCfgRangeRouteTag Unsigned32,
ospf3NewCfgRangeState INTEGER,
ospf3NewCfgRangeDelete INTEGER
}
ospf3NewCfgRangeIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The range number for which the OSPFv3 summary range table is related."
::= { ospf3NewCfgRangeEntry 1}
ospf3NewCfgRangeAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IPv6 Address of the range.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
::= { ospf3NewCfgRangeEntry 2 }
ospf3NewCfgRangePrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The prefix length of the range."
::= { ospf3NewCfgRangeEntry 3 }
ospf3NewCfgRangeAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The area index."
::= { ospf3NewCfgRangeEntry 4 }
ospf3NewCfgRangeHideState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the hide range."
::= { ospf3NewCfgRangeEntry 5 }
ospf3NewCfgRangeLsaType OBJECT-TYPE
SYNTAX INTEGER {
summary(8195),
type7(8199)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The LSA type for aggregation.
summary(8195),
type7(8199)"
::= { ospf3NewCfgRangeEntry 6 }
ospf3NewCfgRangeRouteTag OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The route tag of the range."
::= { ospf3NewCfgRangeEntry 7 }
ospf3NewCfgRangeState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the range."
::= { ospf3NewCfgRangeEntry 8 }
ospf3NewCfgRangeDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { ospf3NewCfgRangeEntry 9 }
-- ospfv3 summary prefix
ospf3CurCfgExtRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3CurCfgExtRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 AS-External range in the current configuration."
::= { ospf3Cfg 14 }
ospf3CurCfgExtRangeEntry OBJECT-TYPE
SYNTAX Ospf3CurCfgExtRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPFv3 AS-External range."
INDEX { ospf3CurCfgExtRangeIndex }
::= { ospf3CurCfgExtRangeTable 1 }
Ospf3CurCfgExtRangeEntry ::= SEQUENCE {
ospf3CurCfgExtRangeIndex Integer32,
ospf3CurCfgExtRangeAddr DisplayString,
ospf3CurCfgExtRangePrefixLen INTEGER,
ospf3CurCfgExtRangeAreaIndex Integer32,
ospf3CurCfgExtRangeTranslation INTEGER,
ospf3CurCfgExtRangeAggrEffect INTEGER,
ospf3CurCfgExtRangeState INTEGER
}
ospf3CurCfgExtRangeIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The range number for which the OSPFv3 AS-External range table is related."
::= { ospf3CurCfgExtRangeEntry 1}
ospf3CurCfgExtRangeAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 Address of the AS-External range."
::= { ospf3CurCfgExtRangeEntry 2 }
ospf3CurCfgExtRangePrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The prefix length of the AS-External range."
::= { ospf3CurCfgExtRangeEntry 3 }
ospf3CurCfgExtRangeAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The area index."
::= { ospf3CurCfgExtRangeEntry 4 }
ospf3CurCfgExtRangeTranslation OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the setting the P-bit in the generated LSA."
::= { ospf3CurCfgExtRangeEntry 5 }
ospf3CurCfgExtRangeAggrEffect OBJECT-TYPE
SYNTAX INTEGER {
advertise(1),
not-advertise(2),
allowAll(3),
denyAll(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aggregation effect.
advertise(1),
not-advertise(2),
allowAll(3),
denyAll(4)"
::= { ospf3CurCfgExtRangeEntry 6 }
ospf3CurCfgExtRangeState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the AS-External range."
::= { ospf3CurCfgExtRangeEntry 7 }
ospf3NewCfgExtRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3NewCfgExtRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 summary AS-External range in the new configuration."
::= { ospf3Cfg 15 }
ospf3NewCfgExtRangeEntry OBJECT-TYPE
SYNTAX Ospf3NewCfgExtRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPFv3 summary AS-External range."
INDEX { ospf3NewCfgExtRangeIndex }
::= { ospf3NewCfgExtRangeTable 1 }
Ospf3NewCfgExtRangeEntry ::= SEQUENCE {
ospf3NewCfgExtRangeIndex Integer32,
ospf3NewCfgExtRangeAddr DisplayString,
ospf3NewCfgExtRangePrefixLen INTEGER,
ospf3NewCfgExtRangeAreaIndex Integer32,
ospf3NewCfgExtRangeTranslation INTEGER,
ospf3NewCfgExtRangeAggrEffect INTEGER,
ospf3NewCfgExtRangeState INTEGER,
ospf3NewCfgExtRangeDelete INTEGER
}
ospf3NewCfgExtRangeIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The range number for which the OSPFv3 AS-External range table is related."
::= { ospf3NewCfgExtRangeEntry 1}
ospf3NewCfgExtRangeAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IPv6 Address of the AS-External range.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
::= { ospf3NewCfgExtRangeEntry 2 }
ospf3NewCfgExtRangePrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The prefix length of the AS-External range."
::= { ospf3NewCfgExtRangeEntry 3 }
ospf3NewCfgExtRangeAreaIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The area index."
::= { ospf3NewCfgExtRangeEntry 4 }
ospf3NewCfgExtRangeTranslation OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the setting the P-bit in the generated LSA."
::= { ospf3NewCfgExtRangeEntry 5 }
ospf3NewCfgExtRangeAggrEffect OBJECT-TYPE
SYNTAX INTEGER {
advertise(1),
not-advertise(2),
allowAll(3),
denyAll(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The aggregation effect.
advertise(1),
not-advertise(2),
allowAll(3),
denyAll(4)"
::= { ospf3NewCfgExtRangeEntry 6 }
ospf3NewCfgExtRangeState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the AS-External range."
::= { ospf3NewCfgExtRangeEntry 7 }
ospf3NewCfgExtRangeDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { ospf3NewCfgExtRangeEntry 8 }
-- ospfv3 redist entries
ospf3CurCfgRedistTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3CurCfgRedistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 redistribution entries in the current configuration."
::= { ospf3Cfg 16 }
ospf3CurCfgRedistEntry OBJECT-TYPE
SYNTAX Ospf3CurCfgRedistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPFv3 redistribution entry."
INDEX { ospf3CurCfgRedistIndex }
::= { ospf3CurCfgRedistTable 1 }
Ospf3CurCfgRedistEntry ::= SEQUENCE {
ospf3CurCfgRedistIndex Integer32,
ospf3CurCfgRedistAddr DisplayString,
ospf3CurCfgRedistPrefixLen INTEGER,
ospf3CurCfgRedistMetric INTEGER,
ospf3CurCfgRedistMetricType INTEGER,
ospf3CurCfgRedistRouteTagTypeManual INTEGER,
ospf3CurCfgRedistRouteTag Unsigned32,
ospf3CurCfgRedistState INTEGER
}
ospf3CurCfgRedistIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The redistribution entry number for which the OSPFv3 redistribution entry table is related."
::= { ospf3CurCfgRedistEntry 1}
ospf3CurCfgRedistAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 Address of the redistribution entry."
::= { ospf3CurCfgRedistEntry 2 }
ospf3CurCfgRedistPrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The prefix length of the redistribution entry."
::= { ospf3CurCfgRedistEntry 3 }
ospf3CurCfgRedistMetric OBJECT-TYPE
SYNTAX INTEGER (1..16777215)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric to be applied to the route."
::= { ospf3CurCfgRedistEntry 4 }
ospf3CurCfgRedistMetricType OBJECT-TYPE
SYNTAX INTEGER {
asExttype1(3),
asExttype2(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric type.
asExttype1(3),
asExttype2(4)"
::= { ospf3CurCfgRedistEntry 5 }
ospf3CurCfgRedistRouteTag OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route tag of the redistribution entry."
::= { ospf3CurCfgRedistEntry 6 }
ospf3CurCfgRedistRouteTagTypeManual OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
manual(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the route tag is set manually. "
::= { ospf3CurCfgRedistEntry 7 }
ospf3CurCfgRedistState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the redistribution entry."
::= { ospf3CurCfgRedistEntry 8 }
ospf3NewCfgRedistTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3NewCfgRedistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 summary redistribution entry in the new configuration."
::= { ospf3Cfg 17 }
ospf3NewCfgRedistEntry OBJECT-TYPE
SYNTAX Ospf3NewCfgRedistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPFv3 summary redistribution entry."
INDEX { ospf3NewCfgRedistIndex }
::= { ospf3NewCfgRedistTable 1 }
Ospf3NewCfgRedistEntry ::= SEQUENCE {
ospf3NewCfgRedistIndex Integer32,
ospf3NewCfgRedistAddr DisplayString,
ospf3NewCfgRedistPrefixLen INTEGER,
ospf3NewCfgRedistMetric INTEGER,
ospf3NewCfgRedistMetricType INTEGER,
ospf3NewCfgRedistRouteTagTypeManual INTEGER,
ospf3NewCfgRedistRouteTag Unsigned32,
ospf3NewCfgRedistState INTEGER,
ospf3NewCfgRedistDelete INTEGER
}
ospf3NewCfgRedistIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The redistribution entry number for which the OSPFv3 redistribution entry table is related."
::= { ospf3NewCfgRedistEntry 1}
ospf3NewCfgRedistAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IPv6 Address of the redistribution entry.
Address should be 4-byte haxadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
::= { ospf3NewCfgRedistEntry 2 }
ospf3NewCfgRedistPrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The prefix length of the redistribution entry."
::= { ospf3NewCfgRedistEntry 3 }
ospf3NewCfgRedistMetric OBJECT-TYPE
SYNTAX INTEGER (1..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric to be applied to the route."
::= { ospf3NewCfgRedistEntry 4 }
ospf3NewCfgRedistMetricType OBJECT-TYPE
SYNTAX INTEGER {
asExttype1(3),
asExttype2(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric type.
asExttype1(3),
asExttype2(4)"
::= { ospf3NewCfgRedistEntry 5 }
ospf3NewCfgRedistRouteTag OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The route tag of the redistribution entry."
::= { ospf3NewCfgRedistEntry 6 }
ospf3NewCfgRedistRouteTagTypeManual OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
manual(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if the route tag is set manually. "
::= { ospf3NewCfgRedistEntry 7 }
ospf3NewCfgRedistState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the redistribution entry."
::= { ospf3NewCfgRedistEntry 8 }
ospf3NewCfgRedistDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { ospf3NewCfgRedistEntry 9 }
ospf3RouteRedistribution OBJECT IDENTIFIER ::= { ospf3Cfg 18 }
ospf3RedistributeConnected OBJECT IDENTIFIER ::= { ospf3RouteRedistribution 1 }
ospf3CurCfgConnectedMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777215)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric to be assigned to Connected routes."
::= { ospf3RedistributeConnected 1 }
ospf3NewCfgConnectedMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The metric to be assigned to Connected routes."
::= { ospf3RedistributeConnected 2 }
ospf3CurCfgConnectedMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS External metric type for Connected routes."
::= { ospf3RedistributeConnected 3 }
ospf3NewCfgConnectedMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AS External metric type for Connected routes."
::= { ospf3RedistributeConnected 4 }
ospf3CurCfgConnectedRouteTag OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Assigned route tag "
::= { ospf3RedistributeConnected 5 }
ospf3NewCfgConnectedRouteTag OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Assigned route tag "
::= { ospf3RedistributeConnected 6 }
ospf3CurCfgConnectedRouteTagTypeManual OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
manual(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the route tag is set manually."
::= { ospf3RedistributeConnected 7 }
ospf3NewCfgConnectedRouteTagTypeManual OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
manual(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if the route tag is set manually."
::= { ospf3RedistributeConnected 8 }
ospf3RedistributeStatic OBJECT IDENTIFIER ::= { ospf3RouteRedistribution 2 }
ospf3CurCfgStaticMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777215)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric to be assigned to static routes."
::= { ospf3RedistributeStatic 1 }
ospf3NewCfgStaticMetric OBJECT-TYPE
SYNTAX INTEGER (0..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The metric to be assigned to static routes."
::= { ospf3RedistributeStatic 2 }
ospf3CurCfgStaticMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS External metric type for static routes."
::= { ospf3RedistributeStatic 3 }
ospf3NewCfgStaticMetricType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
type1(2),
type2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AS External metric type for static routes."
::= { ospf3RedistributeStatic 4 }
ospf3CurCfgStaticRouteTag OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Assigned route tag "
::= { ospf3RedistributeStatic 5 }
ospf3NewCfgStaticRouteTag OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Assigned route tag "
::= { ospf3RedistributeStatic 6 }
ospf3CurCfgStaticRouteTagTypeManual OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
manual(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the route tag is set manually."
::= { ospf3RedistributeStatic 7 }
ospf3NewCfgStaticRouteTagTypeManual OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
manual(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if the route tag is set manually."
::= { ospf3RedistributeStatic 8 }
ipv6PmtuCurTimeout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPv6 PMTU Expired Time Value(0|10-100), 0 indicates INFINITY. Other values should be in [10, 100]"
::= { ipv6pmtuCfg 1 }
ipv6PmtuNewTimeout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPv6 PMTU Expired Time Value(0|10-100), 0 indicates INFINITY. Other values should be in [10, 100]"
::= { ipv6pmtuCfg 2 }
ipv6PmtuEntriesClearAll OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to clear(2),clears all ipv6 PMTU entries. Otherwhise nothing is done."
::= { ipv6pmtuCfg 3}
ipCurCfgRouterID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The router ID of the switch."
::= { ipGeneralCfg 1 }
ipNewCfgRouterID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router ID of the switch."
::= { ipGeneralCfg 2 }
ipFloodCurCfgFlood OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable flooding unregistered IPMCs"
::= { ipGeneralCfg 3 }
ipFloodNewCfgFlood OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable flooding unregistered IPMCs"
::= { ipGeneralCfg 4 }
-- IGMP config
igmpCurCfgOnOff OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Globally turn IGMP On/Off."
::= { igmpCfg 1}
igmpNewCfgOnOff OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Globally turn IGMP On/Off."
::= { igmpCfg 2}
igmpSnoopCfg OBJECT IDENTIFIER ::= { igmpCfg 9 }
-- IGMP Snooping config
igmpSnoopCurCfgMrto OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of multicast router timeout in the current config."
::= { igmpSnoopCfg 7 }
igmpSnoopNewCfgMrto OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of multicast router timeout in the new config."
::= { igmpSnoopCfg 8 }
igmpSnoopCurCfgAggrEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable of IGMP Report aggregation."
::= { igmpSnoopCfg 9}
igmpSnoopNewCfgAggrEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable of IGMP Report aggregation."
::= { igmpSnoopCfg 10}
igmpSnoopCurCfgEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of IGMP Snooping."
::= { igmpSnoopCfg 11}
igmpSnoopNewCfgEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Enable/Disable of IGMP Snooping."
::= { igmpSnoopCfg 12}
igmpSnoopNewCfgVlanAdd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN to be added to snooping vlan list. When read,
0 is returned."
::= { igmpSnoopCfg 13 }
igmpSnoopNewCfgVlanRem OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN to be removed from snooping vlan list. When read,
0 is returned."
::= { igmpSnoopCfg 14 }
igmpSnoopNewCfgVlanClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Removing ALL Snooping Vlans."
::= { igmpSnoopCfg 15 }
igmpSnoopCurCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The snooping vlans present in the vlan map list.
The snooping vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has snoop enabled
0 - The represented vlan does not have snooping enabled."
::= { igmpSnoopCfg 16 }
igmpSnoopNewCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snooping vlans present in the vlan map list.
The snooping vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has snoop enabled
0 - The represented vlan does not have snooping enabled."
::= { igmpSnoopCfg 17 }
igmpSnoopNewCfgVlanFastlvAdd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN to be added to quick-leave vlan list. When read,
0 is returned."
::= { igmpSnoopCfg 18 }
igmpSnoopNewCfgVlanFastlvRem OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN to be removed from quick-leave vlan list. When read,
0 is returned."
::= { igmpSnoopCfg 19 }
igmpSnoopCurCfgVlanFastlvBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fast-leave enabled vlans present in the vlan map list.
The fast-leave enabled vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has fast-leave enabled
0 - The represented vlan does not have fast-leave enabled."
::= { igmpSnoopCfg 20 }
igmpSnoopNewCfgVlanFastlvBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fast-leave enabled vlans present in the vlan map list.
The fast-leave enabled vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has fast-leave enabled
0 - The represented vlan does not have fast-leave enabled."
::= { igmpSnoopCfg 21 }
igmpSnoopCurCfgTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Query Response Interval."
::= { igmpSnoopCfg 22 }
igmpSnoopNewCfgTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Query Response Interval."
::= { igmpSnoopCfg 23 }
igmpSnoopCurCfgQInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IGMP Query Interval of current config."
::= { igmpSnoopCfg 24 }
igmpSnoopNewCfgQInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IGMP Query Interval of new config."
::= { igmpSnoopCfg 25 }
igmpSnoopCurCfgSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source ip for GSQ proxy in current config."
::= { igmpSnoopCfg 26 }
igmpSnoopNewCfgSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source ip for GSQ proxy in new config."
::= { igmpSnoopCfg 27 }
igmpSnoopCurCfgFlood OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable of flood unregistered IPMC"
::= { igmpSnoopCfg 29}
igmpSnoopNewCfgFlood OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable of flood unregistered IPMC"
::= { igmpSnoopCfg 30}
igmpSnoopSetToDefault OBJECT-TYPE
SYNTAX INTEGER {
none(1),
setDefault(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When setting the value setDefault(2), the IGMP Snooping configuration
is set to the default values. When reading, none(1) is always
returned."
::= { igmpSnoopCfg 33}
igmpSnoopCurCfgRtrAlert OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable sending IGMP messages with Router Alert option."
::= { igmpSnoopCfg 34 }
igmpSnoopNewCfgRtrAlert OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable sending IGMP messages with Router Alert option."
::= { igmpSnoopCfg 35 }
igmpSnoopCurCfgRobustness OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IGMP Robustness variable of current config."
::= { igmpSnoopCfg 36 }
igmpSnoopNewCfgRobustness OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IGMP Robustness variable of new config."
::= { igmpSnoopCfg 37 }
igmpStaticMrtrCfg OBJECT IDENTIFIER ::= { igmpCfg 10 }
igmpFilterCfg OBJECT IDENTIFIER ::= { igmpCfg 11 }
igmpV3SnoopCfg OBJECT IDENTIFIER ::= { igmpCfg 14 }
igmpV3SnoopCurCfgSources OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of sources to snoop in a group record in current config."
::= { igmpV3SnoopCfg 1 }
igmpV3SnoopNewCfgSources OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of sources to snoop in a group record in new config."
::= { igmpV3SnoopCfg 2 }
igmpV3SnoopCurCfgEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of IGMP V3 Snooping."
::= { igmpV3SnoopCfg 3 }
igmpV3SnoopNewCfgEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Enable/Disable of IGMP V3 Snooping."
::= { igmpV3SnoopCfg 4 }
igmpV3SnoopCurCfgExcludeEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of IGMP V3 EXCLUDE filter-mode Snooping."
::= { igmpV3SnoopCfg 5 }
igmpV3SnoopNewCfgExcludeEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Enable/Disable of IGMP V3 EXCLUDE filter-mode Snooping."
::= { igmpV3SnoopCfg 6 }
igmpV3SnoopCurCfgV1V2EnaDis OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of IGMP V1/V2 Report Snooping."
::= { igmpV3SnoopCfg 7 }
igmpV3SnoopNewCfgV1V2EnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Enable/Disable of IGMP V1/V2 Report Snooping."
::= { igmpV3SnoopCfg 8 }
-- IGMP Static Mrtr Support
igmpStaticMrtrCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpStaticMrtrCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP Static Multicast Router table in the current configuration block."
::= { igmpStaticMrtrCfg 1 }
igmpStaticMrtrCurCfgTableEntry OBJECT-TYPE
SYNTAX IgmpStaticMrtrCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Static Multicast Router table."
INDEX { igmpStaticMrtrCurCfgIndx }
::= { igmpStaticMrtrCurCfgTable 1 }
IgmpStaticMrtrCurCfgTableEntry ::= SEQUENCE {
igmpStaticMrtrCurCfgIndx INTEGER,
igmpStaticMrtrCurCfgPortId PortNumber,
igmpStaticMrtrCurCfgVlanId INTEGER,
igmpStaticMrtrCurCfgVersion INTEGER
}
igmpStaticMrtrCurCfgIndx OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP Multicast Router table port index."
::= { igmpStaticMrtrCurCfgTableEntry 1 }
igmpStaticMrtrCurCfgPortId OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP Multicast Router port in the current configuration block."
::= { igmpStaticMrtrCurCfgTableEntry 2 }
igmpStaticMrtrCurCfgVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP Multicast Router port in the current configuration block."
::= { igmpStaticMrtrCurCfgTableEntry 3 }
igmpStaticMrtrCurCfgVersion OBJECT-TYPE
SYNTAX INTEGER {
version1(1),
version2(2),
version3(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP version of the IGMP Static Multicast Router."
::= { igmpStaticMrtrCurCfgTableEntry 4 }
igmpStaticMrtrNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpStaticMrtrNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP Static Multicast Router table in the new configuration block."
::= { igmpStaticMrtrCfg 2 }
igmpStaticMrtrNewCfgTableEntry OBJECT-TYPE
SYNTAX IgmpStaticMrtrNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Static Multicast Router table."
INDEX { igmpStaticMrtrNewCfgIndx }
::= { igmpStaticMrtrNewCfgTable 1 }
IgmpStaticMrtrNewCfgTableEntry ::= SEQUENCE {
igmpStaticMrtrNewCfgIndx INTEGER,
igmpStaticMrtrNewCfgPortId PortNumber,
igmpStaticMrtrNewCfgVlanId INTEGER,
igmpStaticMrtrNewCfgVersion INTEGER,
igmpStaticMrtrNewCfgDelete INTEGER
}
igmpStaticMrtrNewCfgIndx OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP Multicast Router table port index."
::= { igmpStaticMrtrNewCfgTableEntry 1 }
igmpStaticMrtrNewCfgPortId OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IGMP Multicast Router port in the new configuration block."
::= { igmpStaticMrtrNewCfgTableEntry 2 }
igmpStaticMrtrNewCfgVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IGMP Multicast Router port in the new configuration block."
::= { igmpStaticMrtrNewCfgTableEntry 3 }
igmpStaticMrtrNewCfgVersion OBJECT-TYPE
SYNTAX INTEGER {
version1(1),
version2(2),
version3(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IGMP version of the IGMP Static Multicast Router."
::= { igmpStaticMrtrNewCfgTableEntry 4 }
igmpStaticMrtrNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { igmpStaticMrtrNewCfgTableEntry 5 }
igmpStaticMrtrNewCfgClear OBJECT-TYPE
SYNTAX INTEGER {
other(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to the value of 2 (clear), the entire table is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(clear) has no effect on the table."
::= { igmpStaticMrtrCfg 3 }
-- IGMP Filtering
igmpFltCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpFltCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP filtering table in the current configuration block."
::= { igmpFilterCfg 1 }
igmpFltCurCfgTableEntry OBJECT-TYPE
SYNTAX IgmpFltCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the filtering table."
INDEX { igmpFltCurCfgIndx }
::= { igmpFltCurCfgTable 1 }
IgmpFltCurCfgTableEntry ::= SEQUENCE {
igmpFltCurCfgIndx INTEGER,
igmpFltCurCfgMcastIp1 IpAddress,
igmpFltCurCfgMcastIp2 IpAddress,
igmpFltCurCfgAction INTEGER,
igmpFltCurCfgState INTEGER
}
igmpFltCurCfgIndx OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP filter table index."
::= { igmpFltCurCfgTableEntry 1 }
igmpFltCurCfgMcastIp1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Range1 Multicast IP address to be filtered."
::= { igmpFltCurCfgTableEntry 2 }
igmpFltCurCfgMcastIp2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Range2 Multicast IP address to be filtered."
::= { igmpFltCurCfgTableEntry 3 }
igmpFltCurCfgAction OBJECT-TYPE
SYNTAX INTEGER {
allow(1),
deny(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The action for the IGMP filtering rule."
::= { igmpFltCurCfgTableEntry 4 }
igmpFltCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of this IGMP filtering rule."
::= { igmpFltCurCfgTableEntry 5 }
igmpFltNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpFltNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP filtering table in the current configuration block."
::= { igmpFilterCfg 2 }
igmpFltNewCfgTableEntry OBJECT-TYPE
SYNTAX IgmpFltNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the filtering table."
INDEX { igmpFltNewCfgIndx }
::= { igmpFltNewCfgTable 1 }
IgmpFltNewCfgTableEntry ::= SEQUENCE {
igmpFltNewCfgIndx INTEGER,
igmpFltNewCfgMcastIp1 IpAddress,
igmpFltNewCfgMcastIp2 IpAddress,
igmpFltNewCfgAction INTEGER,
igmpFltNewCfgState INTEGER,
igmpFltNewCfgDelete INTEGER
}
igmpFltNewCfgIndx OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP filter table index."
::= { igmpFltNewCfgTableEntry 1 }
igmpFltNewCfgMcastIp1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Range1 Multicast source IP address to be filtered."
::= { igmpFltNewCfgTableEntry 2 }
igmpFltNewCfgMcastIp2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Range2 Multicast source IP address to be filtered."
::= { igmpFltNewCfgTableEntry 3 }
igmpFltNewCfgAction OBJECT-TYPE
SYNTAX INTEGER {
allow(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action for the IGMP filtering rule."
::= { igmpFltNewCfgTableEntry 4 }
igmpFltNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of this IGMP filtering rule."
::= { igmpFltNewCfgTableEntry 5 }
igmpFltNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { igmpFltNewCfgTableEntry 6 }
-- IGMP Filtering Port Table
igmpFltCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpFltCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP filtering port table in the current configuration block."
::= { igmpFilterCfg 3 }
igmpFltCurCfgPortTableEntry OBJECT-TYPE
SYNTAX IgmpFltCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the IGMP filtering port table."
INDEX { igmpFltCurCfgPortIndx }
::= { igmpFltCurCfgPortTable 1 }
IgmpFltCurCfgPortTableEntry ::= SEQUENCE {
igmpFltCurCfgPortIndx PortNumber,
igmpFltCurCfgPortState INTEGER,
igmpFltCurCfgPortFiltBmap OCTET STRING
}
igmpFltCurCfgPortIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { igmpFltCurCfgPortTableEntry 1 }
igmpFltCurCfgPortState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable IGMP filtering."
::= { igmpFltCurCfgPortTableEntry 2 }
igmpFltCurCfgPortFiltBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP filtering rules applied to the port. The filtering rules are
presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ filter 9
|| ||
|| ||___ filter 8
|| |____ filter 7
|| . . .
||_________ filter 2
|__________ filter 1 (as index to igmpFltCurCfgTable)
where x : 1 - The represented IGMP filter rule applied to the port
0 - The represented IGMP filter rule not applied to the port "
::= { igmpFltCurCfgPortTableEntry 3 }
igmpFltNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpFltNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP filtering port table in the new configuration block."
::= { igmpFilterCfg 4 }
igmpFltNewCfgPortTableEntry OBJECT-TYPE
SYNTAX IgmpFltNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the IGMP filtering port table."
INDEX { igmpFltNewCfgPortIndx }
::= { igmpFltNewCfgPortTable 1 }
IgmpFltNewCfgPortTableEntry ::= SEQUENCE {
igmpFltNewCfgPortIndx PortNumber,
igmpFltNewCfgPortState INTEGER,
igmpFltNewCfgPortFiltBmap OCTET STRING,
igmpFltNewCfgPortAddFiltRule INTEGER,
igmpFltNewCfgPortRemFiltRule INTEGER
}
igmpFltNewCfgPortIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { igmpFltNewCfgPortTableEntry 1 }
igmpFltNewCfgPortState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable IGMP filtering."
::= { igmpFltNewCfgPortTableEntry 2 }
igmpFltNewCfgPortFiltBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP filtering rules applied to the port. The filtering rules
are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ filter 9
|| ||
|| ||___ filter 8
|| |____ filter 7
|| . . .
||_________ filter 2
|__________ filter 1 (as index to fltNewCfgTable)
where x : 1 - The represented filter rule applied to the port
0 - The represented filter rule not applied to the port "
::= { igmpFltNewCfgPortTableEntry 3 }
igmpFltNewCfgPortAddFiltRule OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to add filtering rule to a port. The value
specified with this object is the index to the fltNewCfgTable for
which filtering rule to be added to the port. The range of the
valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the
value '0' is returned always."
::= { igmpFltNewCfgPortTableEntry 4 }
igmpFltNewCfgPortRemFiltRule OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to remove filtering rule from a port. The
value specified with this object is the index to the fltNewCfgTable
for which filtering rule to be removed from the port. The range of
the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read,
the value '0' is returned always."
::= { igmpFltNewCfgPortTableEntry 5 }
igmpFltCurCfgEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable of IGMP Filtering."
::= { igmpFilterCfg 5 }
igmpFltNewCfgEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable of IGMP Filtering."
::= { igmpFilterCfg 6 }
igmpCurQurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpCurQurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IGMP querier configuration."
::= { igmpCfg 15 }
igmpCurQurCfgEntry OBJECT-TYPE
SYNTAX IgmpCurQurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the IGMP querier configuration table"
INDEX { igmpCurQurCfgVlanIndex }
::= { igmpCurQurCfgTable 1 }
IgmpCurQurCfgEntry ::= SEQUENCE {
igmpCurQurCfgVlanIndex INTEGER,
igmpCurQuerierState INTEGER,
igmpCurCfgQuerier INTEGER,
igmpCurCfgQueryInterval INTEGER,
igmpCurCfgQurSrcIp IpAddress,
igmpCurCfgElectionType INTEGER,
igmpCurCfgQurRobustness INTEGER,
igmpCurCfgQurStartupCnt INTEGER,
igmpCurCfgQurStartupInt INTEGER,
igmpCurCfgQurMaxRespTime INTEGER,
igmpCurCfgOtherQurAddress DisplayString,
igmpCurCfgOtherQurPresentInt DisplayString,
igmpCurCfgVlanOperVersion INTEGER,
igmpCurVlanOperVersion INTEGER,
igmpCurVlanOlderVerTimer DisplayString
}
igmpCurQurCfgVlanIndex OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan number for which the IGMP querier information is related."
::= { igmpCurQurCfgEntry 1}
igmpCurQuerierState OBJECT-TYPE
SYNTAX INTEGER {
querier(1),
nonQuerier(2),
checkingMembership(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the switch is running as a querier in the VLAN.
Based on the querier election, if elected as a querier, it will
send query messages. If the switch receives the query message with
lower IP/MAC any other querier in the VLAN, It will move to non querier
state. If a leave is received then querier moves to checking membership state."
::= { igmpCurQurCfgEntry 2}
igmpCurCfgQuerier OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The snooping switch can be configured to send IGMP queries.
querier are not present in the VLAN and it set to
'enabled' the switch will generate general query messages.
The query messages will be suppressed if the switch receives
the query message from any other querier with lower IP/MAC in the VLAN."
::= { igmpCurQurCfgEntry 3}
igmpCurCfgQueryInterval OBJECT-TYPE
SYNTAX INTEGER(1..608)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN."
::= { igmpCurQurCfgEntry 4 }
igmpCurCfgQurSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source ip for GSQ proxy in this vlan. This Src Ip will be used in
querier election mechanism. It will be the source address in queries sent bye
the switch."
::= { igmpCurQurCfgEntry 5 }
igmpCurCfgElectionType OBJECT-TYPE
SYNTAX INTEGER {
ipv4(1),
macaddr(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The querier selection type specify the criteria to be used to elect
querier for this VLAN. When a switch is configured as a querier,
this will define the election criteria . e.g. MAC or source IP-address."
::= { igmpCurQurCfgEntry 6 }
igmpCurCfgQurRobustness OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Robustness Variable allows tuning for the Other
Querier Present Interval."
::= { igmpCurQurCfgEntry 7 }
igmpCurCfgQurStartupCnt OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the number of Queries sent out on startup of
querier election, separated by the Startup Query Interval."
::= { igmpCurQurCfgEntry 8 }
igmpCurCfgQurStartupInt OBJECT-TYPE
SYNTAX INTEGER(1..608)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable represents the interval(in seconds) between General
Queries sent by a Querier on startup. By default: 1/4 the Query Interval."
::= { igmpCurQurCfgEntry 9 }
igmpCurCfgQurMaxRespTime OBJECT-TYPE
SYNTAX INTEGER(1..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum query response interval advertised in
IGMP queries on this VLAN."
::= { igmpCurQurCfgEntry 10 }
igmpCurCfgOtherQurAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP/MAC Address of the Querier, which has won the Querier election,
when bosSnoopVlanCfgQuerier is enabled on this vlan."
::= { igmpCurQurCfgEntry 11 }
igmpCurCfgOtherQurPresentInt OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Other Querier Present Interval is the length of time that must
pass before switch decides that there is no longer another
multicast router which should be the querier. This value
is ((the Robustness Variable) times (the Query Interval)) plus
(one half of one Query Response Interval)."
::= { igmpCurQurCfgEntry 12 }
igmpCurCfgVlanOperVersion OBJECT-TYPE
SYNTAX INTEGER {
igmpV1(1),
igmpV2(2),
igmpV3(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operating version of the IGMP snooping switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3). The 'bosIgsVlanCfgOperVersion'
should be configured on the basis of the version of the router
present in the VLAN."
::= { igmpCurQurCfgEntry 13 }
igmpCurVlanOperVersion OBJECT-TYPE
SYNTAX INTEGER {
igmpV1(1),
igmpV2(2),
igmpV3(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operating version of the IGMP snooping switch for
specific VLAN. The default operating mode on a specific VLAN
IGMP version 3 i.e, V3(3)."
::= { igmpCurQurCfgEntry 14 }
igmpCurVlanOlderVerTimer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the remaining time of lowest operating version of the vlan.
For interoperability with multicast routers/switches/Hosts, running older
versions of IGMP, systems maintain a IGMP Version variable for each Vlan.
In order to switch gracefully between versions of IGMP, hosts keep both an
IGMPv1 Querier Present timer and an IGMPv2 Querier Present timer per Vlan.
According to RFC 3376 this value is ((the Robustness Variable) times
(the Query Interval)) plus (one Query Response Interval)."
::= { igmpCurQurCfgEntry 15 }
igmpNewQurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpNewQurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IGMP querier configuration."
::= { igmpCfg 16 }
igmpNewQurCfgEntry OBJECT-TYPE
SYNTAX IgmpNewQurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the IGMP querier configuration table"
INDEX { igmpNewQurCfgVlanIndex }
::= { igmpNewQurCfgTable 1 }
IgmpNewQurCfgEntry ::= SEQUENCE {
igmpNewQurCfgVlanIndex INTEGER,
igmpNewQuerierState INTEGER,
igmpNewCfgQuerier INTEGER,
igmpNewCfgQueryInterval INTEGER,
igmpNewCfgQurSrcIp IpAddress,
igmpNewCfgElectionType INTEGER,
igmpNewCfgQurRobustness INTEGER,
igmpNewCfgQurStartupCnt INTEGER,
igmpNewCfgQurStartupInt INTEGER,
igmpNewCfgQurMaxRespTime INTEGER,
igmpNewCfgOtherQurAddress DisplayString,
igmpNewCfgOtherQurPresentInt DisplayString,
igmpNewCfgVlanOperVersion INTEGER,
igmpNewVlanOperVersion INTEGER,
igmpNewVlanOlderVerTimer DisplayString,
igmpNewCfgQuerierDefault INTEGER
}
igmpNewQurCfgVlanIndex OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan number for which the IGMP querier information is related."
::= { igmpNewQurCfgEntry 1}
igmpNewQuerierState OBJECT-TYPE
SYNTAX INTEGER {
querier(1),
nonQuerier(2),
checkingMembership(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the switch is running as a querier in the VLAN.
Based on the querier election, if elected as a querier, it will
send query messages. If the switch receives the query message with
lower IP/MAC any other querier in the VLAN, It will move to non querier
state. If a leave is received then querier moves to checking membership state."
::= { igmpNewQurCfgEntry 2}
igmpNewCfgQuerier OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snooping switch can be configured to send IGMP queries.
querier are not present in the VLAN and it set to
'enabled' the switch will generate general query messages.
The query messages will be suppressed if the switch receives
the query message from any other querier with lower IP/MAC in the VLAN."
::= { igmpNewQurCfgEntry 3}
igmpNewCfgQueryInterval OBJECT-TYPE
SYNTAX INTEGER(1..608)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN."
::= { igmpNewQurCfgEntry 4 }
igmpNewCfgQurSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source ip for GSQ proxy in this vlan. This Src Ip will be used in
querier election mechanism. It will be the source address in queries sent bye
the switch."
::= { igmpNewQurCfgEntry 5 }
igmpNewCfgElectionType OBJECT-TYPE
SYNTAX INTEGER {
ipv4(1),
macaddr(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The querier selection type specify the criteria to be used to elect
querier for this VLAN. When a switch is configured as a querier,
this will define the election criteria . e.g. MAC or source IP-address."
::= { igmpNewQurCfgEntry 6 }
igmpNewCfgQurRobustness OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Robustness Variable allows tuning for the Other
Querier Present Interval."
::= { igmpNewQurCfgEntry 7 }
igmpNewCfgQurStartupCnt OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the number of Queries sent out on startup of
querier election, separated by the Startup Query Interval."
::= { igmpNewQurCfgEntry 8 }
igmpNewCfgQurStartupInt OBJECT-TYPE
SYNTAX INTEGER(1..608)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable represents the interval(in seconds) between General
Queries sent by a Querier on startup. By default: 1/4 the Query Interval."
::= { igmpNewQurCfgEntry 9 }
igmpNewCfgQurMaxRespTime OBJECT-TYPE
SYNTAX INTEGER(1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum query response interval advertised in
IGMP queries on this VLAN."
::= { igmpNewQurCfgEntry 10 }
igmpNewCfgOtherQurAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP/MAC Address of the Querier, which has won the Querier election,
when bosSnoopVlanCfgQuerier is enabled on this vlan."
::= { igmpNewQurCfgEntry 11 }
igmpNewCfgOtherQurPresentInt OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Other Querier Present Interval is the length of time that must
pass before switch decides that there is no longer another
multicast router which should be the querier. This value
is ((the Robustness Variable) times (the Query Interval)) plus
(one half of one Query Response Interval)."
::= { igmpNewQurCfgEntry 12 }
igmpNewCfgVlanOperVersion OBJECT-TYPE
SYNTAX INTEGER {
igmpV1(1),
igmpV2(2),
igmpV3(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the operating version of the IGMP snooping switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3). The 'igmpNewCfgVlanOperVersion'
should be configured on the basis of the version of the mrouter
present in the VLAN."
::= { igmpNewQurCfgEntry 13 }
igmpNewVlanOperVersion OBJECT-TYPE
SYNTAX INTEGER {
igmpV1(1),
igmpV2(2),
igmpV3(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operating version of the IGMP snooping switch for
specific VLAN. The default operating mode on a specific VLAN
IGMP version 3 i.e, V3(3)."
::= { igmpNewQurCfgEntry 14 }
igmpNewVlanOlderVerTimer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the remaining time of lowest operating version of the vlan.
For interoperability with multicast routers/switches/Hosts, running older
versions of IGMP, systems maintain a IGMP Version variable for each Vlan.
In order to switch gracefully between versions of IGMP, hosts keep both an
IGMPv1 Querier Present timer and an IGMPv2 Querier Present timer per Vlan.
According to RFC 3376 this value is ((the Robustness Variable) times
(the Query Interval)) plus (one Query Response Interval)."
::= { igmpNewQurCfgEntry 15 }
igmpNewCfgQuerierDefault OBJECT-TYPE
SYNTAX INTEGER {
other(1),
default(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action to set the default IGMP Querier settings on a Vlan.
Returns other(1) when read."
::= { igmpNewQurCfgEntry 16 }
igmpCurCfgQuerierOnOff OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of IGMP Querier."
::= { igmpCfg 17}
igmpNewCfgQuerierOnOff OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Globally turn IGMP Querier On/Off."
::= { igmpCfg 18}
--
-- IPMC Static Route Configuration
--
ipmcStaticRouteCfg OBJECT IDENTIFIER ::= { layer3Configs 20 }
ipmcStaticRouteTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the IPMC Static Route table."
::= { ipmcStaticRouteCfg 1 }
ipmcCurCfgStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpmcCurCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static IPMC routes in the current configuration block."
::= { ipmcStaticRouteCfg 2 }
ipmcCurCfgStaticRouteEntry OBJECT-TYPE
SYNTAX IpmcCurCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static IPMC route table"
INDEX { ipmcCurCfgStaticRouteIndx }
::= { ipmcCurCfgStaticRouteTable 1 }
IpmcCurCfgStaticRouteEntry ::= SEQUENCE {
ipmcCurCfgStaticRouteIndx Integer32,
ipmcCurCfgStaticRouteDestIp IpAddress,
ipmcCurCfgStaticRouteVlanId Integer32,
ipmcCurCfgStaticRouteHostBmap OCTET STRING,
ipmcCurCfgStaticRouteAdminkeys DisplayString,
ipmcCurCfgStaticRouteTrunks OCTET STRING
}
ipmcCurCfgStaticRouteIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the IPMC static routing table."
::= { ipmcCurCfgStaticRouteEntry 1}
ipmcCurCfgStaticRouteDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IPMC address of this IPMC route."
::= { ipmcCurCfgStaticRouteEntry 2}
ipmcCurCfgStaticRouteVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan id of this route."
::= { ipmcCurCfgStaticRouteEntry 3}
ipmcCurCfgStaticRouteHostBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Host ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Host Port is added
0 - The represented Host Port is not added"
::= { ipmcCurCfgStaticRouteEntry 4}
ipmcCurCfgStaticRouteAdminkeys OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LACP port adminkey of this route.
Adminkeys on five positions alligned to right, separated by commas."
::= { ipmcCurCfgStaticRouteEntry 8}
ipmcCurCfgStaticRouteTrunks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trunk list for this IPMC route. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to IPMC route
0 - The represented trunk does not belong to IPMC route"
::= { ipmcCurCfgStaticRouteEntry 9 }
ipmcNewCfgStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpmcNewCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IPMC static routes in the new
configuration block.
When creating a new route, Destination IP
and Vlan id must be set first.
The actual change in configuration occurs
on using PortInfo leaf."
::= { ipmcStaticRouteCfg 3 }
ipmcNewCfgStaticRouteEntry OBJECT-TYPE
SYNTAX IpmcNewCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static IPMC route table"
INDEX { ipmcNewCfgStaticRouteIndx }
::= { ipmcNewCfgStaticRouteTable 1 }
IpmcNewCfgStaticRouteEntry ::= SEQUENCE {
ipmcNewCfgStaticRouteIndx Integer32,
ipmcNewCfgStaticRouteDestIp IpAddress,
ipmcNewCfgStaticRouteVlanId Integer32,
ipmcNewCfgStaticRouteHostBmap OCTET STRING,
ipmcNewCfgStaticRouteAddPort Integer32,
ipmcNewCfgStaticRouteRemPort Integer32,
ipmcNewCfgStaticRouteTrunks OCTET STRING,
ipmcNewCfgStaticRouteAddTrunk INTEGER,
ipmcNewCfgStaticRouteRemTrunk INTEGER,
ipmcNewCfgStaticRouteAdminkeys DisplayString,
ipmcNewCfgStaticRouteAddAdminkey INTEGER,
ipmcNewCfgStaticRouteRemAdminkey INTEGER,
ipmcNewCfgStaticRouteDelete INTEGER
}
ipmcNewCfgStaticRouteIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the IPMC static routing table."
::= { ipmcNewCfgStaticRouteEntry 1}
ipmcNewCfgStaticRouteDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination IPMC address of this route.
It must be set along Vlan id before creating
new route."
::= { ipmcNewCfgStaticRouteEntry 2}
ipmcNewCfgStaticRouteVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vlan id of this route.
It must be set along Destination IP before
creating new route."
::= { ipmcNewCfgStaticRouteEntry 3}
ipmcNewCfgStaticRouteHostBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Host ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Host Port is added
0 - The represented Host Port is not added"
::= { ipmcNewCfgStaticRouteEntry 4}
ipmcNewCfgStaticRouteAddPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be added to this IPMC route.
When creating a new route, be sure to set Destination IP
and Vlan Id before using this leaf."
::= { ipmcNewCfgStaticRouteEntry 7}
ipmcNewCfgStaticRouteRemPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be removed from this IPMC route.
Not allowed to delete ports that are part of trunks."
::= { ipmcNewCfgStaticRouteEntry 17}
ipmcNewCfgStaticRouteTrunks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trunk list for this IPMC route. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to ipmc
0 - The represented trunk does not belong to ipmc"
::= { ipmcNewCfgStaticRouteEntry 8 }
ipmcNewCfgStaticRouteAddTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The trunk group number to be added to this IPMC route.
A '0' value is returned when read.
When creating a new route, be sure to set Destination IP
and Vlan Id before using this leaf."
::= { ipmcNewCfgStaticRouteEntry 9 }
ipmcNewCfgStaticRouteRemTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The trunk group number to be added to this IPMC route.
A '0' value is returned when read.
When creating a new route, be sure to set Destination IP
and Vlan Id before using this leaf."
::= { ipmcNewCfgStaticRouteEntry 10 }
ipmcNewCfgStaticRouteAdminkeys OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LACP port adminkeys list for to this IPMC route.
Adminkeys on five positions alligned to right, separated by commas"
::= { ipmcNewCfgStaticRouteEntry 11 }
ipmcNewCfgStaticRouteAddAdminkey OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LACP port adminkey to be added to this IPMC route.
A '0' value is returned when read.
When creating a new route, be sure to set Destination IP
and Vlan Id before using this leaf."
::= { ipmcNewCfgStaticRouteEntry 12 }
ipmcNewCfgStaticRouteRemAdminkey OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LACP port adminkey to be removed from this IPMC route.
A '0' value is returned when read."
::= { ipmcNewCfgStaticRouteEntry 13 }
ipmcNewCfgStaticRouteDelete OBJECT-TYPE
SYNTAX INTEGER {
delete(2),
deletehost(3),
no(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete this route."
::= { ipmcNewCfgStaticRouteEntry 16}
ipmcStaticRouteClearAll OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to clear(2),clears all static IPMC routes. Otherwhise nothing
is done."
::= { ipmcStaticRouteCfg 4 }
--
-- Static ARP Configuration
--
ipStaticArpTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the Static ARP table."
::= { ipStaticArpCfg 1 }
ipCurCfgStaticArpTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgStaticArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static ARPs in the current configuration block."
::= { ipStaticArpCfg 2 }
ipCurCfgStaticArpEntry OBJECT-TYPE
SYNTAX IpCurCfgStaticArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static ARP table"
INDEX { ipCurCfgStaticArpIndx }
::= { ipCurCfgStaticArpTable 1 }
IpCurCfgStaticArpEntry ::= SEQUENCE {
ipCurCfgStaticArpIndx Integer32,
ipCurCfgStaticArpIp IpAddress,
ipCurCfgStaticArpMAC DisplayString,
ipCurCfgStaticArpVlan Integer32,
ipCurCfgStaticArpPort PortNumber
}
ipCurCfgStaticArpIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the static ARP table."
::= { ipCurCfgStaticArpEntry 1}
ipCurCfgStaticArpIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address for the ARP entry."
::= { ipCurCfgStaticArpEntry 2}
ipCurCfgStaticArpMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address for the ARP entry."
::= { ipCurCfgStaticArpEntry 3 }
ipCurCfgStaticArpVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN for the ARP entry."
::= { ipCurCfgStaticArpEntry 4}
ipCurCfgStaticArpPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port for the ARP entry."
::= { ipCurCfgStaticArpEntry 5}
ipNewCfgStaticArpTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgStaticArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static ARPs in the new configuration block."
::= { ipStaticArpCfg 3 }
ipNewCfgStaticArpEntry OBJECT-TYPE
SYNTAX IpNewCfgStaticArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static ARP table"
INDEX { ipNewCfgStaticArpIndx }
::= { ipNewCfgStaticArpTable 1 }
IpNewCfgStaticArpEntry ::= SEQUENCE {
ipNewCfgStaticArpIndx Integer32,
ipNewCfgStaticArpIp IpAddress,
ipNewCfgStaticArpMAC DisplayString,
ipNewCfgStaticArpVlan Integer32,
ipNewCfgStaticArpPort PortNumber,
ipNewCfgStaticArpAction INTEGER
}
ipNewCfgStaticArpIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the static ARP table."
::= { ipNewCfgStaticArpEntry 1}
ipNewCfgStaticArpIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address for the ARP entry."
::= { ipNewCfgStaticArpEntry 2}
ipNewCfgStaticArpMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC address for the ARP entry."
::= { ipNewCfgStaticArpEntry 3 }
ipNewCfgStaticArpVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN for the ARP entry."
::= { ipNewCfgStaticArpEntry 4}
ipNewCfgStaticArpPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port for the ARP entry."
::= { ipNewCfgStaticArpEntry 5}
ipNewCfgStaticArpAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row."
::= { ipNewCfgStaticArpEntry 6 }
ipStaticArpClearAll OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to clear(2), clears all static ARP entries. Otherwise
nothing is done."
::= { ipStaticArpCfg 4 }
--
-- Static NBR Configuration
--
ipStaticNbrTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the Static NBR Cache table."
::= { ipStaticNbrCfg 1 }
ipCurCfgStaticNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgStaticNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static NBR Cache entries in the current configuration block."
::= { ipStaticNbrCfg 2 }
ipCurCfgStaticNbrEntry OBJECT-TYPE
SYNTAX IpCurCfgStaticNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static NBR Cache table"
INDEX { ipCurCfgStaticNbrIndx }
::= { ipCurCfgStaticNbrTable 1 }
IpCurCfgStaticNbrEntry ::= SEQUENCE {
ipCurCfgStaticNbrIndx Integer32,
ipCurCfgStaticNbrIp DisplayString,
ipCurCfgStaticNbrMAC DisplayString,
ipCurCfgStaticNbrVlan Integer32,
ipCurCfgStaticNbrPort PortNumber
}
ipCurCfgStaticNbrIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the static NBR Cache table."
::= { ipCurCfgStaticNbrEntry 1}
ipCurCfgStaticNbrIp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address for the NBR Cache entry."
::= { ipCurCfgStaticNbrEntry 2}
ipCurCfgStaticNbrMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address for the NBR Cache entry."
::= { ipCurCfgStaticNbrEntry 3 }
ipCurCfgStaticNbrVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN for the NBR Cache entry."
::= { ipCurCfgStaticNbrEntry 4}
ipCurCfgStaticNbrPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port for the NBR Cache entry."
::= { ipCurCfgStaticNbrEntry 5}
ipNewCfgStaticNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgStaticNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static NBR Cache entries in the new configuration block."
::= { ipStaticNbrCfg 3 }
ipNewCfgStaticNbrEntry OBJECT-TYPE
SYNTAX IpNewCfgStaticNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static NBR Cache table"
INDEX { ipNewCfgStaticNbrIndx }
::= { ipNewCfgStaticNbrTable 1 }
IpNewCfgStaticNbrEntry ::= SEQUENCE {
ipNewCfgStaticNbrIndx Integer32,
ipNewCfgStaticNbrIp DisplayString,
ipNewCfgStaticNbrMAC DisplayString,
ipNewCfgStaticNbrVlan Integer32,
ipNewCfgStaticNbrPort PortNumber,
ipNewCfgStaticNbrAction INTEGER
}
ipNewCfgStaticNbrIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the static NBR Cache table."
::= { ipNewCfgStaticNbrEntry 1}
ipNewCfgStaticNbrIp OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address for the NBR Cache entry."
::= { ipNewCfgStaticNbrEntry 2}
ipNewCfgStaticNbrMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC address for the NBR Cache entry."
::= { ipNewCfgStaticNbrEntry 3 }
ipNewCfgStaticNbrVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN for the NBR Cache entry."
::= { ipNewCfgStaticNbrEntry 4}
ipNewCfgStaticNbrPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port for the NBR Cache entry."
::= { ipNewCfgStaticNbrEntry 5}
ipNewCfgStaticNbrAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row."
::= { ipNewCfgStaticNbrEntry 6 }
ipStaticNbrClearAll OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to clear(2),clears all static NBR Cache entries. Otherwhise nothing is done."
::= { ipStaticNbrCfg 4 }
--
-- IP Static Route6 Configuration
--
ipStaticRoute6TableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the Static Route6 table."
::= { ipStaticRoute6Cfg 1 }
ipCurCfgStaticRoute6Table OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgStaticRoute6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static IP6 routes in the current configuration block."
::= { ipStaticRoute6Cfg 2 }
ipCurCfgStaticRoute6Entry OBJECT-TYPE
SYNTAX IpCurCfgStaticRoute6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static IP6 route table"
INDEX { ipCurCfgStaticRoute6Indx }
::= { ipCurCfgStaticRoute6Table 1 }
IpCurCfgStaticRoute6Entry ::= SEQUENCE {
ipCurCfgStaticRoute6Indx Integer32,
ipCurCfgStaticRoute6DestIp DisplayString,
ipCurCfgStaticRoute6Mask INTEGER,
ipCurCfgStaticRoute6Gateway DisplayString,
ipCurCfgStaticRoute6Interface Integer32
}
ipCurCfgStaticRoute6Indx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the static IP6 routing table."
::= { ipCurCfgStaticRoute6Entry 1}
ipCurCfgStaticRoute6DestIp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP6 address of this route."
::= { ipCurCfgStaticRoute6Entry 2}
ipCurCfgStaticRoute6Mask OBJECT-TYPE
SYNTAX INTEGER (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP6 prefix len of this route."
::= { ipCurCfgStaticRoute6Entry 3}
ipCurCfgStaticRoute6Gateway OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP6 address of the gateway for this route."
::= { ipCurCfgStaticRoute6Entry 4}
ipCurCfgStaticRoute6Interface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP6 interface of this route. The IP6 address of the specified
interface shall be used as source IP when performs routing."
::= { ipCurCfgStaticRoute6Entry 5}
ipNewCfgStaticRoute6Table OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgStaticRoute6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static IP6 routes in the new configuration block."
::= { ipStaticRoute6Cfg 3 }
ipStaticRoute6ClearAllByDestIp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all static IP6 routes with the specified destination IP6 address."
::= { ipStaticRoute6Cfg 4}
ipStaticRoute6ClearAllByGatewayIp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all static IP6 routes with the specified gateway IP address."
::= { ipStaticRoute6Cfg 5}
ipStaticRoute6ClearAllByInterface OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all IP6 routes on the specified inteface number."
::= { ipStaticRoute6Cfg 6}
ipStaticRoute6ClearAll OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to clear(2), clears all IP6 static routes. Otherwise
nothing is done."
::= { ipStaticRoute6Cfg 7}
ipNewCfgStaticRoute6Entry OBJECT-TYPE
SYNTAX IpNewCfgStaticRoute6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static IP6 route table"
INDEX { ipNewCfgStaticRoute6Indx }
::= { ipNewCfgStaticRoute6Table 1 }
IpNewCfgStaticRoute6Entry ::= SEQUENCE {
ipNewCfgStaticRoute6Indx Integer32,
ipNewCfgStaticRoute6DestIp DisplayString,
ipNewCfgStaticRoute6Mask INTEGER,
ipNewCfgStaticRoute6Gateway DisplayString,
ipNewCfgStaticRoute6Action INTEGER,
ipNewCfgStaticRoute6Interface Integer32
}
ipNewCfgStaticRoute6Indx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the static IP6 routing table."
::= { ipNewCfgStaticRoute6Entry 1}
ipNewCfgStaticRoute6DestIp OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination IP6 address of this route.
Address should be 16-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { ipNewCfgStaticRoute6Entry 2}
ipNewCfgStaticRoute6Mask OBJECT-TYPE
SYNTAX INTEGER (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The prefix length of this route."
::= { ipNewCfgStaticRoute6Entry 3}
ipNewCfgStaticRoute6Gateway OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP6 address of the gateway for this route.
Address should be 16-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { ipNewCfgStaticRoute6Entry 4}
ipNewCfgStaticRoute6Action OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the value '2' to delete the entire route entry.
Value 1 (other) is returned when read."
::= { ipNewCfgStaticRoute6Entry 5 }
ipNewCfgStaticRoute6Interface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP6 interface of this route. The IP6 address of the specified
interface shall be used as source IP when performs routing."
::= { ipNewCfgStaticRoute6Entry 6 }
--
-- IPv6 Default Gateway Configuration
--
ipGatewayIpv6TableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the IPv6 gateway table."
::= { ipGatewayIpv6Cfg 1 }
ipCurCfgGwIpv6Table OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgGwIpv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IPv6 gateways in the Current configuration Block."
::= { ipGatewayIpv6Cfg 2 }
ipCurCfgGwIpv6Entry OBJECT-TYPE
SYNTAX IpCurCfgGwIpv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Ipv6 gateway table"
INDEX { ipCurCfgGwIpv6Index }
::= { ipCurCfgGwIpv6Table 1 }
IpCurCfgGwIpv6Entry ::= SEQUENCE {
ipCurCfgGwIpv6Index Integer32,
ipCurCfgGwIpv6Addr DisplayString,
ipCurCfgGwIpv6State INTEGER
}
ipCurCfgGwIpv6Index OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 gateway number for which the information is related."
::= { ipCurCfgGwIpv6Entry 1}
ipCurCfgGwIpv6Addr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 address of the gateway. Address should be 4-byte
hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx or
fe80:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx%interface"
::= { ipCurCfgGwIpv6Entry 2 }
ipCurCfgGwIpv6State OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the default IPv6 gateway."
::= { ipCurCfgGwIpv6Entry 3 }
ipNewCfgGwIpv6Table OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgGwIpv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IPv6 gateways in the new configuration block."
::= { ipGatewayIpv6Cfg 3 }
ipNewCfgGwIpv6Entry OBJECT-TYPE
SYNTAX IpNewCfgGwIpv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Ipv6 gateway table"
INDEX { ipNewCfgGwIpv6Index }
::= { ipNewCfgGwIpv6Table 1 }
IpNewCfgGwIpv6Entry ::= SEQUENCE {
ipNewCfgGwIpv6Index Integer32,
ipNewCfgGwIpv6Addr DisplayString,
ipNewCfgGwIpv6State INTEGER,
ipNewCfgGwIpv6Delete INTEGER
}
ipNewCfgGwIpv6Index OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 gateway number for which the information is related."
::= { ipNewCfgGwIpv6Entry 1}
ipNewCfgGwIpv6Addr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IPv6 address of the gateway. Address should be 4-byte
hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { ipNewCfgGwIpv6Entry 2 }
ipNewCfgGwIpv6State OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the default IPv6 gateway."
::= { ipNewCfgGwIpv6Entry 3 }
ipNewCfgGwIpv6Delete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the default gw is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the default IPv6 gw."
::= { ipNewCfgGwIpv6Entry 4 }
--
-- Prefix policy table Configuration
--
pptTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the Prefix policy table."
::= { pptCfg 1 }
pptCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF PPTCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of prefix policy table entries in the current configuration block."
::= { pptCfg 2 }
pptCurCfgEntry OBJECT-TYPE
SYNTAX PPTCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the prefix policy table"
INDEX { pptCurCfgIndx }
::= { pptCurCfgTable 1 }
PPTCurCfgEntry ::= SEQUENCE {
pptCurCfgIndx Integer32,
pptCurCfgPrefix DisplayString,
pptCurCfgPrefixLen Integer32,
pptCurCfgPrecedence Integer32,
pptCurCfgLabel Integer32
}
pptCurCfgIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the prefix policy table."
::= { pptCurCfgEntry 1}
pptCurCfgPrefix OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The prefix address for the prefix policy table entry."
::= { pptCurCfgEntry 2}
pptCurCfgPrefixLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The prefix length for the prefix policy table entry."
::= { pptCurCfgEntry 3}
pptCurCfgPrecedence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The precedence for the prefix policy table entry."
::= { pptCurCfgEntry 4}
pptCurCfgLabel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The label for the prefix policy table entry."
::= { pptCurCfgEntry 5}
pptNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF PPTNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of prefix policy table entries in the new configuration block."
::= { pptCfg 3 }
pptNewCfgEntry OBJECT-TYPE
SYNTAX PPTNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the prefix policy table"
INDEX { pptNewCfgIndx }
::= { pptNewCfgTable 1 }
PPTNewCfgEntry ::= SEQUENCE {
pptNewCfgIndx Integer32,
pptNewCfgPrefix DisplayString,
pptNewCfgPrefixLen Integer32,
pptNewCfgPrecedence Integer32,
pptNewCfgLabel Integer32,
pptNewCfgAction INTEGER
}
pptNewCfgIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the prefix policy table."
::= { pptNewCfgEntry 1}
pptNewCfgPrefix OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The prefix address for the prefix policy table entry."
::= { pptNewCfgEntry 2}
pptNewCfgPrefixLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The prefix length the prefix policy table entry."
::= { pptNewCfgEntry 3}
pptNewCfgPrecedence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The precedence for the prefix policy table entry."
::= { pptNewCfgEntry 4}
pptNewCfgLabel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The label for the prefix policy table entry."
::= { pptNewCfgEntry 5}
pptNewCfgAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row."
::= { pptNewCfgEntry 6 }
mldCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MLD global state."
::= { mldCfg 1 }
mldNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "MLD global state."
::= { mldCfg 2 }
mldCurInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldCurInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the interfaces on which
MLD is enabled."
::= { mldCfg 3 }
mldCurInterfaceEntry OBJECT-TYPE
SYNTAX MldCurInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing an interface on
which MLD is enabled."
INDEX { mldCurInterfaceIfIndex }
::= { mldCurInterfaceTable 1 }
MldCurInterfaceEntry ::= SEQUENCE {
mldCurInterfaceIfIndex Integer32,
mldCurInterfaceQueryInterval INTEGER,
mldCurInterfaceVersion INTEGER,
mldCurInterfaceQueryMaxResponseIntvl INTEGER,
mldCurInterfaceRobustness INTEGER,
mldCurInterfaceLastListenQueryIntvl INTEGER,
mldCurInterfaceDMrtrEna INTEGER,
mldCurInterfaceState INTEGER
}
mldCurInterfaceIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internetwork-layer interface value of the interface
for which MLD is enabled."
::= { mldCurInterfaceEntry 1 }
mldCurInterfaceQueryInterval OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frequency at which MLD Host-Query packets are
transmitted on this interface."
DEFVAL { 125 }
::= { mldCurInterfaceEntry 2 }
mldCurInterfaceVersion OBJECT-TYPE
SYNTAX INTEGER {
mldv1(1),
mldv2(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of MLD which is running on this interface.
This object is a place holder to allow for new versions
of MLD to be introduced. Version 1 of MLD is defined
in RFC 2710."
DEFVAL { 1 }
::= { mldCurInterfaceEntry 3 }
mldCurInterfaceQueryMaxResponseIntvl OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum query response time advertised in MLD
queries on this interface."
DEFVAL { 1000 }
::= { mldCurInterfaceEntry 4 }
mldCurInterfaceRobustness OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. MLD is
robust to (Robustness Variable-1) packet losses. The
discussion of the Robustness Variable is in Section 7.1
of RFC 2710."
DEFVAL { 2 }
::= { mldCurInterfaceEntry 5 }
mldCurInterfaceLastListenQueryIntvl OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Last Member Query Interval is the Max Response
Delay inserted into Group-Specific Queries sent in
response to Leave Group messages, and is also the amount
of time between Group-Specific Query messages. This
value may be tuned to modify the leave latency of the
network. A reduced value results in reduced time to
detect the loss of the last member of a group."
DEFVAL { 1 }
::= { mldCurInterfaceEntry 6 }
mldCurInterfaceDMrtrEna OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dynamic MRouter learning."
DEFVAL { 0 }
::= { mldCurInterfaceEntry 7 }
mldCurInterfaceState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State of the MLD interface."
DEFVAL { 0 }
::= { mldCurInterfaceEntry 8 }
mldNewInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldNewInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the interfaces on which
MLD is enabled."
::= { mldCfg 4 }
mldNewInterfaceEntry OBJECT-TYPE
SYNTAX MldNewInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing an interface on
which MLD is enabled."
INDEX { mldNewInterfaceIfIndex }
::= { mldNewInterfaceTable 1 }
MldNewInterfaceEntry ::= SEQUENCE {
mldNewInterfaceIfIndex Integer32,
mldNewInterfaceQueryInterval INTEGER,
mldNewInterfaceVersion INTEGER,
mldNewInterfaceQueryMaxResponseIntvl INTEGER,
mldNewInterfaceRobustness INTEGER,
mldNewInterfaceLastListenQueryIntvl INTEGER,
mldNewInterfaceDMrtrEna INTEGER,
mldNewInterfaceState INTEGER,
mldNewInterfaceDefault INTEGER
}
mldNewInterfaceIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internetwork-layer interface value of the interface
for which MLD is enabled."
::= { mldNewInterfaceEntry 1 }
mldNewInterfaceQueryInterval OBJECT-TYPE
SYNTAX INTEGER(2..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frequency at which MLD Host-Query packets are
transmitted on this interface."
DEFVAL { 125 }
::= { mldNewInterfaceEntry 2 }
mldNewInterfaceVersion OBJECT-TYPE
SYNTAX INTEGER {
mldv1(1),
mldv2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of MLD which is running on this interface.
This object is a place holder to allow for new versions
of MLD to be introduced. Version 1 of MLD is defined
in RFC 2710."
DEFVAL { 1 }
::= { mldNewInterfaceEntry 3 }
mldNewInterfaceQueryMaxResponseIntvl OBJECT-TYPE
SYNTAX INTEGER(1000..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum query response time advertised in MLD
queries on this interface."
DEFVAL { 10000 }
::= { mldNewInterfaceEntry 4 }
mldNewInterfaceRobustness OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. MLD is
robust to (Robustness Variable-1) packet losses. The
discussion of the Robustness Variable is in Section 7.1
of RFC 2710."
DEFVAL { 2 }
::= { mldNewInterfaceEntry 5 }
mldNewInterfaceLastListenQueryIntvl OBJECT-TYPE
SYNTAX INTEGER(1..32)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Last Member Query Interval is the Max Response
Delay inserted into Group-Specific Queries sent in
response to Leave Group messages, and is also the amount
of time between Group-Specific Query messages. This
value may be tuned to modify the leave latency of the
network. A reduced value results in reduced time to
detect the loss of the last member of a group."
DEFVAL { 1 }
::= { mldNewInterfaceEntry 6 }
mldNewInterfaceDMrtrEna OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dynamic MRouter learning."
DEFVAL { 0 }
::= { mldNewInterfaceEntry 7 }
mldNewInterfaceState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"State of the MLD interface."
DEFVAL { 0 }
::= { mldNewInterfaceEntry 8 }
mldNewInterfaceDefault OBJECT-TYPE
SYNTAX INTEGER {
other(1),
default(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action to set the MLD interface configuration to default.
Returns other(1) when read."
::= { mldNewInterfaceEntry 9 }
mldDefaultCfgState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
default(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action to set the global MLD configuration to default.
Returns other(1) when read."
::= { mldCfg 5 }
--
-- Neighbor Discovery Prefix Configuration
--
ndprefixTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the NDPrefix table."
::= { ndprefixCfg 1 }
ndprefixCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF NDPREFIXCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ndprefix table entries in the current configuration block."
::= { ndprefixCfg 2 }
ndprefixCurCfgEntry OBJECT-TYPE
SYNTAX NDPREFIXCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the ndprefix table."
INDEX { ndprefixCurCfgIndx }
::= { ndprefixCurCfgTable 1 }
NDPREFIXCurCfgEntry ::= SEQUENCE {
ndprefixCurCfgIndx INTEGER,
ndprefixCurCfgPrefix DisplayString,
ndprefixCurCfgPrefixLen INTEGER,
ndprefixCurCfgInterfaceIndex Integer32,
ndprefixCurCfgProfileIndex INTEGER,
ndprefixCurCfgValidLifetime Gauge32,
ndprefixCurCfgValidLifetimeFlag INTEGER,
ndprefixCurCfgPreferredLifetime Gauge32,
ndprefixCurCfgPreferredLifetimeFlag INTEGER,
ndprefixCurCfgOnlinkFlag INTEGER,
ndprefixCurCfgAutonomousFlag INTEGER,
ndprefixCurCfgState INTEGER
}
ndprefixCurCfgIndx OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ndprefix table."
::= { ndprefixCurCfgEntry 1}
ndprefixCurCfgPrefix OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The prefix address for the prefix table entry."
::= { ndprefixCurCfgEntry 2}
ndprefixCurCfgPrefixLen OBJECT-TYPE
SYNTAX INTEGER (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The prefix length for the prefix table entry."
::= { ndprefixCurCfgEntry 3}
ndprefixCurCfgInterfaceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index for the prefix table entry."
::= { ndprefixCurCfgEntry 4}
ndprefixCurCfgProfileIndex OBJECT-TYPE
SYNTAX INTEGER (0..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The profile index for the prefix table entry
Profile 0 is the default profile."
::= { ndprefixCurCfgEntry 5}
ndprefixCurCfgValidLifetime OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Valid lifetime for the prefix table entry."
::= { ndprefixCurCfgEntry 6}
ndprefixCurCfgValidLifetimeFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Valid lifetime fixed flag for the prefix table entry."
::= { ndprefixCurCfgEntry 7}
ndprefixCurCfgPreferredLifetime OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Preferred Lifetime for the prefix table entry."
::= { ndprefixCurCfgEntry 8}
ndprefixCurCfgPreferredLifetimeFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Preferred Lifetime fixed flag for the prefix table entry."
::= { ndprefixCurCfgEntry 9}
ndprefixCurCfgOnlinkFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Onlink flag for the prefix table entry."
::= { ndprefixCurCfgEntry 10}
ndprefixCurCfgAutonomousFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Autonomous flag for the prefix table entry."
::= { ndprefixCurCfgEntry 11}
ndprefixCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state for the prefix table entry."
::= { ndprefixCurCfgEntry 12}
ndprefixNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF NDPREFIXNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ndprefix table entries in the new configuration block."
::= { ndprefixCfg 3 }
ndprefixNewCfgEntry OBJECT-TYPE
SYNTAX NDPREFIXNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the prefix table"
INDEX { ndprefixNewCfgIndx }
::= { ndprefixNewCfgTable 1 }
NDPREFIXNewCfgEntry ::= SEQUENCE {
ndprefixNewCfgIndx Integer32,
ndprefixNewCfgPrefix DisplayString,
ndprefixNewCfgPrefixLen INTEGER,
ndprefixNewCfgInterfaceIndex Integer32,
ndprefixNewCfgProfileIndex INTEGER,
ndprefixNewCfgValidLifetime Gauge32,
ndprefixNewCfgValidLifetimeFlag INTEGER,
ndprefixNewCfgPreferredLifetime Gauge32,
ndprefixNewCfgPreferredLifetimeFlag INTEGER,
ndprefixNewCfgOnlinkFlag INTEGER,
ndprefixNewCfgAutonomousFlag INTEGER,
ndprefixNewCfgState INTEGER,
ndprefixNewCfgAction INTEGER
}
ndprefixNewCfgIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the prefix table."
::= { ndprefixNewCfgEntry 1}
ndprefixNewCfgPrefix OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The prefix address for the prefix table entry."
::= { ndprefixNewCfgEntry 2}
ndprefixNewCfgPrefixLen OBJECT-TYPE
SYNTAX INTEGER (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The prefix length for the prefix table entry."
::= { ndprefixNewCfgEntry 3}
ndprefixNewCfgInterfaceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface index for the prefix table entry."
::= { ndprefixNewCfgEntry 4}
ndprefixNewCfgProfileIndex OBJECT-TYPE
SYNTAX INTEGER (0..127)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The profile index for the prefix table entry.
Profile 0 is the default profile."
::= { ndprefixNewCfgEntry 5}
ndprefixNewCfgValidLifetime OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Valid lifetime for the prefix table entry."
::= { ndprefixNewCfgEntry 6}
ndprefixNewCfgValidLifetimeFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Valid lifetime fixed flag for the prefix table entry."
::= { ndprefixNewCfgEntry 7}
ndprefixNewCfgPreferredLifetime OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Preferred Lifetime for the prefix table entry."
::= { ndprefixNewCfgEntry 8}
ndprefixNewCfgPreferredLifetimeFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Preferred Lifetime fixed flag for the prefix table entry."
::= { ndprefixNewCfgEntry 9}
ndprefixNewCfgOnlinkFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Onlink flag for the prefix table entry."
::= { ndprefixNewCfgEntry 10}
ndprefixNewCfgAutonomousFlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Autonomous flag for the prefix table entry."
::= { ndprefixNewCfgEntry 11}
ndprefixNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state for the prefix table entry."
::= { ndprefixNewCfgEntry 12}
ndprefixNewCfgAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2),
deleteall(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When set to the value of 3 (deleteall), all entries are deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) or 3(deleteall) has no effect on the state of the row."
::= { ndprefixNewCfgEntry 13}
-- Statistics
-- RIPv2 Statistics
ripStatInPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP packets received."
::= { rip2Stats 1 }
ripStatOutPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP packets transmitted."
::= { rip2Stats 2 }
ripStatInRequestPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP requests received."
::= { rip2Stats 3 }
ripStatInResponsePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP response received."
::= { rip2Stats 4 }
ripStatOutRequestPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP requests transmitted."
::= { rip2Stats 5 }
ripStatOutResponsePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP responses transmitted."
::= { rip2Stats 6 }
ripStatRouteTimeout OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP route timeouts."
::= { rip2Stats 7 }
ripStatInBadSizePkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bad size RIP packets received."
::= { rip2Stats 8 }
ripStatInBadVersion OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP bad versions received."
::= { rip2Stats 9 }
ripStatInBadZeros OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP bad zeros received."
::= { rip2Stats 10 }
ripStatInBadSourcePort OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP bad source port received."
::= { rip2Stats 11 }
ripStatInBadSourceIP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP bad source IP received."
::= { rip2Stats 12 }
ripStatInSelfRcvPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RIP packets from self received."
::= { rip2Stats 13 }
-- IP statistics
ipStatsInReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip InReceive"
::= { ipStats 1 }
ipStatsInHdrErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip InHdrError"
::= { ipStats 2 }
ipStatsInAddrErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip InAddrErrors"
::= { ipStats 3 }
ipStatsInUnknownProtos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip InUnknownProtos"
::= { ipStats 5 }
ipStatsInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip InDiscards"
::= { ipStats 6 }
ipStatsInDelivers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip InDelivers"
::= { ipStats 7 }
ipStatsOutRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip OutRequests"
::= { ipStats 8 }
ipStatsOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip OutDiscards"
::= { ipStats 9 }
ipStatsDefaultTTL OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip DefaultTTL"
::= { ipStats 19 }
--SNMP statistics
nsnmpInPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInPkts"
::= { snmpStats 1 }
nsnmpInBadCommunityNames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInBadCommunityNames"
::= { snmpStats 2 }
nsnmpInASNParseErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInASNParseErrs"
::= { snmpStats 3 }
nsnmpOutPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutPkts"
::= { snmpStats 4 }
nsnmpInTooBigs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInTooBigs"
::= { snmpStats 5 }
nsnmpInBadValues OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInBadValues"
::= { snmpStats 6 }
nsnmpInGenErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInGenErrs"
::= { snmpStats 7 }
nsnmpInTotalSetVars OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInTotalSetVars"
::= { snmpStats 8 }
nsnmpInGetNexts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInGetNexts"
::= { snmpStats 9 }
nsnmpInGetResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInGetResponses"
::= { snmpStats 10 }
nsnmpOutTooBigs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutTooBigs"
::= { snmpStats 11 }
nsnmpOutBadValues OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutBadValues"
::= { snmpStats 12 }
nsnmpOutGenErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutGenErrs"
::= { snmpStats 13 }
nsnmpOutGetNexts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutGetNexts"
::= { snmpStats 14 }
nsnmpOutGetResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutGetResponses"
::= { snmpStats 15 }
nsnmpSilentDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpSilentDrops"
::= { snmpStats 16 }
nsnmpInBadVersions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInBadVersions"
::= { snmpStats 17 }
nsnmpInBadCommunityUses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInBadCommunityUses"
::= { snmpStats 18 }
nsnmpEnableAuthTraps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpEnableAuthTraps"
::= { snmpStats 19 }
nsnmpInBadTypes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInBadTypes"
::= { snmpStats 20 }
nsnmpInNoSuchNames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInNoSuchNames"
::= { snmpStats 21 }
nsnmpInReadOnlys OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInReadOnlys"
::= { snmpStats 22 }
nsnmpInTotalReqVars OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInTotalReqVars"
::= { snmpStats 23 }
nsnmpInGetRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInGetRequests"
::= { snmpStats 24 }
nsnmpInSetRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInSetRequests"
::= { snmpStats 25 }
nsnmpInTraps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInTraps"
::= { snmpStats 26 }
nsnmpOutNoSuchNames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutNoSuchNames"
::= { snmpStats 27 }
nsnmpOutReadOnlys OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutReadOnlys"
::= { snmpStats 28 }
nsnmpOutGetRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutGetRequests"
::= { snmpStats 29 }
nsnmpOutSetRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutSetRequests"
::= { snmpStats 30 }
nsnmpOutTraps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutTraps"
::= { snmpStats 31 }
nsnmpProxyDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpProxyDrops"
::= { snmpStats 32 }
-- ICMP statistics
icmpStatsInMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InMsgs"
::= { icmpStats 1 }
icmpStatsInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InErrors"
::= { icmpStats 2 }
icmpStatsInDestUnreachs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InDestUnreachs"
::= { icmpStats 3 }
icmpStatsInTimeExcds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InTimeExcds"
::= { icmpStats 4 }
icmpStatsInParmProbs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InParmProbs"
::= { icmpStats 5 }
icmpStatsInSrcQuenchs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InSrcQuenchs"
::= { icmpStats 6 }
icmpStatsInRedirects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InRedirects"
::= { icmpStats 7 }
icmpStatsInEchos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InEchos"
::= { icmpStats 8 }
icmpStatsInEchoReps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InEchoReps"
::= { icmpStats 9 }
icmpStatsInTimestamps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InTimestamps"
::= { icmpStats 10 }
icmpStatsInTimestampReps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InTimestampReps"
::= { icmpStats 11 }
icmpStatsInAddrMasks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InAddrMasks"
::= { icmpStats 12 }
icmpStatsInAddrMaskReps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InAddrMaskReps"
::= { icmpStats 13 }
icmpStatsOutMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutMsgs"
::= { icmpStats 14 }
icmpStatsOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutErrors"
::= { icmpStats 15 }
icmpStatsOutDestUnreachs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutDestUnreachs"
::= { icmpStats 16 }
icmpStatsOutTimeExcds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutTimeExcds"
::= { icmpStats 17 }
icmpStatsOutParmProbs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutParmProbs"
::= { icmpStats 18 }
icmpStatsOutSrcQuenchs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutSrcQuenchs"
::= { icmpStats 19 }
icmpStatsOutRedirects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutRedirects"
::= { icmpStats 20 }
icmpStatsOutEchos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutEchos"
::= { icmpStats 21 }
icmpStatsOutEchoReps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutEchoReps"
::= { icmpStats 22 }
icmpStatsOutTimestamps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutTimestamps"
::= { icmpStats 23 }
icmpStatsOutTimestampReps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutTimestampReps"
::= { icmpStats 24 }
icmpStatsOutAddrMasks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutAddrMasks"
::= { icmpStats 25 }
icmpStatsOutAddrMaskReps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutAddrMaskReps"
::= { icmpStats 26 }
-- TCP statistics
tcpStatsRtoAlgorithm OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp RtoAlgorithm"
::= { tcpStats 1 }
tcpStatsRtoMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp RtoMin"
::= { tcpStats 2 }
tcpStatsRtoMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp RtoMax"
::= { tcpStats 3 }
tcpStatsMaxConn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp MaxConn"
::= { tcpStats 4 }
tcpStatsActiveOpens OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp ActiveOpens"
::= { tcpStats 5 }
tcpStatsPassiveOpens OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp PassiveOpens"
::= { tcpStats 6 }
tcpStatsAttemptFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp AttemptFails"
::= { tcpStats 7 }
tcpStatsEstabResets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp EstabResets"
::= { tcpStats 8 }
tcpStatsInSegs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp InSegs"
::= { tcpStats 9 }
tcpStatsOutSegs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp OutSegs"
::= { tcpStats 10 }
tcpStatsRetransSegs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp RetransSegs"
::= { tcpStats 11 }
tcpStatsInErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp InErrs"
::= { tcpStats 12 }
tcpStatsCurrEstab OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp CurrEstab"
::= { tcpStats 13 }
tcpStatsCurrConn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp CurrConn"
::= { tcpStats 14 }
tcpStatsOutRsts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp OutRsts"
::= { tcpStats 15 }
-- UDP statistics
udpStatsInDatagrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"udp InDatagrams"
::= { udpStats 1 }
udpStatsOutDatagrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"udp OutDatagrams"
::= { udpStats 2 }
udpStatsInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"udp InErrors"
::= { udpStats 3 }
udpStatsNoPorts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"udp NoPorts"
::= { udpStats 4 }
-- BOOTP statistics
bootpRelayStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BootpRelayStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BOOTP relay agent statistics."
::= { bootpStats 1 }
bootpRelayStatsTableEntry OBJECT-TYPE
SYNTAX BootpRelayStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the BOOTP relay agent statistics table."
INDEX { bootpRelayStatsIndex }
::= { bootpRelayStatsTable 1 }
BootpRelayStatsTableEntry ::= SEQUENCE {
bootpRelayStatsIndex PortNumber,
bootpRelayStatsRequestsReceived Counter32,
bootpRelayStatsRequestsRelayed Counter32,
bootpRelayStatsRequestsDroppedNoRelay Counter32,
bootpRelayStatsRequestsDroppedNoServer Counter32,
bootpRelayStatsRequestsDroppedError Counter32,
bootpRelayStatsRepliesReceived Counter32,
bootpRelayStatsRepliesRelayed Counter32,
bootpRelayStatsRepliesDroppedError Counter32
}
bootpRelayStatsIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port associated with this BOOTP relay
statistics entry."
::= { bootpRelayStatsTableEntry 1 }
bootpRelayStatsRequestsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BOOTP request packets received on the port."
::= { bootpRelayStatsTableEntry 2 }
bootpRelayStatsRequestsRelayed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of request packets relayed to the BOOTP server. If
there is more than one server, a request is relayed once for
each server; hence, with two servers, this counter will be twice
as many as the value of the bootpRelayStatsRequestsReceived
object."
::= { bootpRelayStatsTableEntry 3 }
bootpRelayStatsRequestsDroppedNoRelay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter increases each time a request could not be relayed
because BOOTP relay is disabled or not allowed on the port."
::= { bootpRelayStatsTableEntry 5 }
bootpRelayStatsRequestsDroppedNoServer OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter increases each time a request is dropped because
there is no configured server or the server is unreachable
because there is no active IP interface that can be used for
relaying the request to the server."
::= { bootpRelayStatsTableEntry 6 }
bootpRelayStatsRequestsDroppedError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter increases each time a request is dropped due to
various errors encountered while processing the request packet.
Such errors include short packet length, invalid 'hops' value,
and memory allocation errors."
::= { bootpRelayStatsTableEntry 7 }
bootpRelayStatsRepliesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the total number of BOOTP response packets received on
the port associated with this object."
::= { bootpRelayStatsTableEntry 8 }
bootpRelayStatsRepliesRelayed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the total number of response packets that were relayed
to the client."
::= { bootpRelayStatsTableEntry 9 }
bootpRelayStatsRepliesDroppedError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter increases each time a response packet is dropped
due to various errors encountered while processing the packet.
Errors include unknown relay agent addresses ('giaddr'), and
memory allocation errors."
::= { bootpRelayStatsTableEntry 10 }
-- ARP Statistics Group
arpStatEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of ARP entries."
::= { arpStats 1 }
arpStatHighWater OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of ARP entries."
::= { arpStats 2 }
arpStatMaxEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of ARP entries."
::= { arpStats 3 }
-- NBR Statistics
nbrStatEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of NBR entries."
::= { nbrStats 1 }
nbrStatHighWater OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of NBR entries."
::= { nbrStats 2 }
nbrStatMaxEntries OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of NBR entries."
::= { nbrStats 3}
-- ROUTE Statistics Group
routeStatEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of IP routes."
::= { routeStats 1 }
routeStatHighWater OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of IP routes."
::= { routeStats 2 }
routeStatStaticEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current static routes."
::= { routeStats 3 }
routeStatRipEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current RIP routes."
::= { routeStats 4 }
routeStatOspfEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current OSPF routes."
::= { routeStats 5 }
routeStatBgpEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current BGP routes."
::= { routeStats 6 }
routeStatMaxEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of IP routes."
::= { routeStats 7 }
routeStatEcmpMaxEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of ECMP routes."
::= { routeStats 8 }
routeStatEcmpMaxStaticEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of static ECMP routes."
::= { routeStats 9 }
routeStatEcmpMaxDynamicEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of dynamic ECMP routes."
::= { routeStats 10 }
routeStatEcmpPathsEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of routes with ECMP paths."
::= { routeStats 11 }
-- DNS Statistics
dnsStatInGoodDnsRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DNS request packets which are received."
::= { dnsStats 1 }
dnsStatInBadDnsRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DNS request packets received that were dropped."
::= { dnsStats 2 }
dnsStatOutDnsRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DNS request packets that have been transmitted."
::= { dnsStats 3 }
-- The VRRP Statistics
vrrpStatInAdvers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of good VRRP advertisements which are received."
::= { vrrpStats 1 }
vrrpStatOutAdvers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of good VRRP advertisements which are transmitted."
::= { vrrpStats 2 }
vrrpStatBadAdvers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bad VRRP advertisements which are received."
::= { vrrpStats 3 }
vrrpStatBadVersion OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bad VRRP version adv which are received."
::= { vrrpStats 4 }
vrrpStatBadAddress OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bad VRRP addres adv which are received."
::= { vrrpStats 5 }
vrrpStatBadPassword OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bad VRRP advertisements which are received."
::= { vrrpStats 6 }
vrrpStatBadVrid OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bad VRRP version ID adv which are received."
::= { vrrpStats 7 }
vrrpStatBadData OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bad VRRP advertisements which are received."
::= { vrrpStats 8 }
vrrpStatBadInterval OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bad VRRP intervals which are received."
::= { vrrpStats 9 }
vrrpStatOutGratuitousARPs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of gratuitous ARP packets which are transmitted."
::= { vrrpStats 10 }
-- Clear Statistics for ip and ip interface
ipClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the IP statistics."
::= { clearStats 1 }
vrrpClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the VRRP statistics."
::= { clearStats 2 }
ospfClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the OSPF statistics."
::= { clearStats 4 }
tcpClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the TCP statistics."
::= { clearStats 5 }
udpClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the UDP statistics."
::= { clearStats 6 }
dnsClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the DNS statistics."
::= { clearStats 7 }
arpClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the ARP statistics."
::= { clearStats 8 }
icmpClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the ICMP statistics."
::= { clearStats 9 }
routeClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the Route statistics."
::= { clearStats 10 }
ipv6ClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the IPv6 statistics."
::= { clearStats 13 }
ipv6ClearIcmpStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the ICMP6 statistics."
::= { clearStats 14 }
ipv6ClearUdpStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the UDP6 statistics."
::= { clearStats 15 }
ospf3ClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the ospf3 statistics."
::= { clearStats 16 }
ripClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the RIP statistics."
::= { clearStats 17 }
ipv6NbrClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the IPv6 nbr statistics."
::= { clearStats 18 }
-- Ospf Statistics
-- Ospf Statistics for all interfaces and OSPF areas
ospfGeneralStats OBJECT IDENTIFIER ::= { ospfStats 1 }
ospfCumRxTxStats OBJECT IDENTIFIER ::= { ospfGeneralStats 1 }
ospfCumNbrChangeStats OBJECT IDENTIFIER ::= { ospfGeneralStats 2 }
ospfCumIntfChangeStats OBJECT IDENTIFIER ::= { ospfGeneralStats 3 }
ospfTimersKickOffStats OBJECT IDENTIFIER ::= { ospfGeneralStats 4 }
-- Ospf Statistics / Area
ospfArea OBJECT IDENTIFIER ::= { ospfStats 2 }
ospfAreaRxTxStats OBJECT-TYPE
SYNTAX SEQUENCE OF OspfAreaRxTxStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Area Rx/Tx Statistics."
::= { ospfArea 1 }
ospfAreaRxTxStatsEntry OBJECT-TYPE
SYNTAX OspfAreaRxTxStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Rx Tx packet Statistics about a OSPF area."
INDEX { ospfAreaRxTxIndex }
::= { ospfAreaRxTxStats 1 }
OspfAreaRxTxStatsEntry ::= SEQUENCE {
ospfAreaRxTxIndex Integer32,
ospfAreaRxPkts Counter32,
ospfAreaTxPkts Counter32,
ospfAreaRxHello Counter32,
ospfAreaTxHello Counter32,
ospfAreaRxDatabase Counter32,
ospfAreaTxDatabase Counter32,
ospfAreaRxlsReqs Counter32,
ospfAreaTxlsReqs Counter32,
ospfAreaRxlsAcks Counter32,
ospfAreaTxlsAcks Counter32,
ospfAreaRxlsUpdates Counter32,
ospfAreaTxlsUpdates Counter32
}
ospfAreaRxTxIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ospf Area for which these statistics apply."
::= { ospfAreaRxTxStatsEntry 1 }
ospfAreaRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of OSPF packets received in this OSPF area."
::= { ospfAreaRxTxStatsEntry 2 }
ospfAreaTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of OSPF packets transmitted in this OSPF area."
::= { ospfAreaRxTxStatsEntry 3 }
ospfAreaRxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received in this OSPF area."
::= { ospfAreaRxTxStatsEntry 4 }
ospfAreaTxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets transmitted in this OSPF
area."
::= { ospfAreaRxTxStatsEntry 5 }
ospfAreaRxDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets transmitted
for this OSPF area."
::= { ospfAreaRxTxStatsEntry 6 }
ospfAreaTxDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets transmitted
for this OSPF area."
::= { ospfAreaRxTxStatsEntry 7 }
ospfAreaRxlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Request packets received for
this OSPF area."
::= { ospfAreaRxTxStatsEntry 8 }
ospfAreaTxlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Request packets transmitted for
this OSPF area."
::= { ospfAreaRxTxStatsEntry 9 }
ospfAreaRxlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Acknowledgement packets received for
this OSPF area."
::= { ospfAreaRxTxStatsEntry 10 }
ospfAreaTxlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Acknowledgement packets transmitted
for this OSPF area."
::= { ospfAreaRxTxStatsEntry 11 }
ospfAreaRxlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Update packets received for
this OSPF area."
::= { ospfAreaRxTxStatsEntry 12 }
ospfAreaTxlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Update packets transmitted for
this OSPF area."
::= { ospfAreaRxTxStatsEntry 13 }
ospfAreaNbrChangeStats OBJECT-TYPE
SYNTAX SEQUENCE OF OspfAreaNbrChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Area Neighbour Statistics."
::= { ospfArea 2 }
ospfAreaNbrChangeStatsEntry OBJECT-TYPE
SYNTAX OspfAreaNbrChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Area Neighbour Change Statistics about a OSPF area."
INDEX { ospfAreaNbrIndex }
::= { ospfAreaNbrChangeStats 1 }
OspfAreaNbrChangeStatsEntry ::= SEQUENCE {
ospfAreaNbrIndex Integer32,
ospfAreaNbrhello Counter32,
ospfAreaNbrStart Counter32,
ospfAreaNbrAdjointOk Counter32,
ospfAreaNbrNegotiationDone Counter32,
ospfAreaNbrExchangeDone Counter32,
ospfAreaNbrBadRequests Counter32,
ospfAreaNbrBadSequence Counter32,
ospfAreaNbrLoadingDone Counter32,
ospfAreaNbrN1way Counter32,
ospfAreaNbrRstAd Counter32,
ospfAreaNbrDown Counter32,
ospfAreaNbrN2way Counter32
}
ospfAreaNbrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ospf Area for which these statistics apply."
::= { ospfAreaNbrChangeStatsEntry 1 }
ospfAreaNbrhello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received from neighbours
in this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 2 }
ospfAreaNbrStart OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of neighbours in this state (i.e. an indication
that Hello packets should now be sent to the neighbour at intervals
of HelloInterval seconds.) in this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 3 }
ospfAreaNbrAdjointOk OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of decisions to be made (again) as to whether
an adjacency should be established/maintained with the neighbour.
for this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 4 }
ospfAreaNbrNegotiationDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of neighbours in this state wherein the
Master/slave relationship has been negotiated, and sequence
numbers have been exchanged, for this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 5 }
ospfAreaNbrExchangeDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of neighbours in this state (i.e. in an
adjacency's final state) having transimitted a full sequence
of Database Description packets, for this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 6 }
ospfAreaNbrBadRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of Link State Requests which have been received
for a link state advertisement not contained in the database across
this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 7 }
ospfAreaNbrBadSequence OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets which have been
received that either
a) has an unexpected DD sequence number
b) Unexpectedly has the init bit set
c) Has an options field differing from the last Options field
received in a Database Description packet.
Any of these conditions indicate that some error has occured during
adjacency establishment for this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 8 }
ospfAreaNbrLoadingDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of link state updates received for all
out-of-date portions of the database in this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 9 }
ospfAreaNbrN1way OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received from neighbours, in
which this router is not mentioned in this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 10 }
ospfAreaNbrRstAd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the Neighbour adjacency has been reset
across this OPSF area."
::= { ospfAreaNbrChangeStatsEntry 11 }
ospfAreaNbrDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Neighbouring routers down (i.e. in the initial
state of a neighbour conversation.) in this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 12 }
ospfAreaNbrN2way OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received from neighbours, in
which this router is mentioned in this OSPF area."
::= { ospfAreaNbrChangeStatsEntry 13 }
ospfAreaChangeStats OBJECT-TYPE
SYNTAX SEQUENCE OF OspfAreaChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Area Change Statistics."
::= { ospfArea 3 }
ospfAreaChangeStatsEntry OBJECT-TYPE
SYNTAX OspfAreaChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Area Change Statistics about a OSPF area."
INDEX { ospfAreaIntfIndex }
::= { ospfAreaChangeStats 1 }
OspfAreaChangeStatsEntry ::= SEQUENCE {
ospfAreaIntfIndex Integer32,
ospfAreaIntfHello Counter32,
ospfAreaIntfDown Counter32,
ospfAreaIntfLoop Counter32,
ospfAreaIntfUnloop Counter32,
ospfAreaIntfWaitTimer Counter32,
ospfAreaIntfBackup Counter32,
ospfAreaIntfNbrChange Counter32
}
ospfAreaIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the OSPF Area for which these statistics apply."
::= { ospfAreaChangeStatsEntry 1 }
ospfAreaIntfHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets sent on this OSPF area."
::= { ospfAreaChangeStatsEntry 2 }
ospfAreaIntfDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of interfaces down in this OSPF area."
::= { ospfAreaChangeStatsEntry 3 }
ospfAreaIntfLoop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of interfaces no longer connected to
the attatched network in this OSPF area."
::= { ospfAreaChangeStatsEntry 4 }
ospfAreaIntfUnloop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of interfaces connected to the attatched
network in this OSPF area.."
::= { ospfAreaChangeStatsEntry 5 }
ospfAreaIntfWaitTimer OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the Wait Timer has been fired,
(indicating the end of the waiting period that is required
before electing a (Backup) Designated Router) for this
OSPF area."
::= { ospfAreaChangeStatsEntry 6 }
ospfAreaIntfBackup OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Backup Designated Routers on the attatched
network for this OSPF area."
::= { ospfAreaChangeStatsEntry 7 }
ospfAreaIntfNbrChange OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of changes in the set of bidirectional neighbours
associated with the interface in this OSPF area."
::= { ospfAreaChangeStatsEntry 8 }
ospfAreaErrorStats OBJECT-TYPE
SYNTAX SEQUENCE OF OspfAreaErrorStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Area Error Statistics."
::= { ospfArea 4 }
ospfAreaErrorStatsEntry OBJECT-TYPE
SYNTAX OspfAreaErrorStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Error Statistics for an OSPF area."
INDEX { ospfAreaErrIndex }
::= { ospfAreaErrorStats 1 }
OspfAreaErrorStatsEntry ::= SEQUENCE {
ospfAreaErrIndex Integer32,
ospfAreaErrAuthFailure Counter32,
ospfAreaErrNetmaskMismatch Counter32,
ospfAreaErrHelloMismatch Counter32,
ospfAreaErrDeadMismatch Counter32,
ospfAreaErrOptionsMismatch Counter32,
ospfAreaErrUnknownNbr Counter32,
ospfAreaErrAreaMismatch Counter32,
ospfAreaErrInvalidSelfOrigLsa Counter32
}
ospfAreaErrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the OSPF Area for which these statistics apply."
::= { ospfAreaErrorStatsEntry 1 }
ospfAreaErrAuthFailure OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a wrong password in
this area."
::= { ospfAreaErrorStatsEntry 2 }
ospfAreaErrNetmaskMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a wrong netmask in
this area."
::= { ospfAreaErrorStatsEntry 3 }
ospfAreaErrHelloMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different hello interval
in this area."
::= { ospfAreaErrorStatsEntry 4 }
ospfAreaErrDeadMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different dead interval
in this area."
::= { ospfAreaErrorStatsEntry 5 }
ospfAreaErrOptionsMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different options
in this area."
::= { ospfAreaErrorStatsEntry 6 }
ospfAreaErrUnknownNbr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received from an unknown neighbor
in this area."
::= { ospfAreaErrorStatsEntry 7 }
ospfAreaErrAreaMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a wrong area."
::= { ospfAreaErrorStatsEntry 8 }
ospfAreaErrInvalidSelfOrigLsa OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with invalid self
originated LSAs."
::= { ospfAreaErrorStatsEntry 9 }
-- Ospf Statistics / Interface
ospfInterface OBJECT IDENTIFIER ::= { ospfStats 3 }
ospfIntfRxTxStats OBJECT-TYPE
SYNTAX SEQUENCE OF OspfIntfRxTxStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Interface Rx/Tx packet Statistics."
::= { ospfInterface 1 }
ospfIntfRxTxStatsEntry OBJECT-TYPE
SYNTAX OspfIntfRxTxStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OSPF interface Rx/Tx packet statistics."
INDEX { ospfIntfRxTxIndex }
::= { ospfIntfRxTxStats 1 }
OspfIntfRxTxStatsEntry ::= SEQUENCE {
ospfIntfRxTxIndex Integer32,
ospfIntfRxPkts Counter32,
ospfIntfTxPkts Counter32,
ospfIntfRxHello Counter32,
ospfIntfTxHello Counter32,
ospfIntfRxDatabase Counter32,
ospfIntfTxDatabase Counter32,
ospfIntfRxlsReqs Counter32,
ospfIntfTxlsReqs Counter32,
ospfIntfRxlsAcks Counter32,
ospfIntfTxlsAcks Counter32,
ospfIntfRxlsUpdates Counter32,
ospfIntfTxlsUpdates Counter32
}
ospfIntfRxTxIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF interface for which these statistics apply."
::= { ospfIntfRxTxStatsEntry 1 }
ospfIntfRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of OSPF packets received for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 2 }
ospfIntfTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of OSPF packets transmitted for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 3 }
ospfIntfRxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received
for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 4 }
ospfIntfTxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets transmitted
for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 5 }
ospfIntfRxDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets received
for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 6 }
ospfIntfTxDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets transmitted
for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 7 }
ospfIntfRxlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Request packets received
for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 8 }
ospfIntfTxlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Request packets transmitted
for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 9 }
ospfIntfRxlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Acknowledgement packets received
for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 10 }
ospfIntfTxlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Acknowledgement packets transmitted
for this OSPF interface."
::= { ospfIntfRxTxStatsEntry 11 }
ospfIntfRxlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Update packets received for
this OSPF interface."
::= { ospfIntfRxTxStatsEntry 12 }
ospfIntfTxlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Update packets transmitted for
this OSPF interface."
::= { ospfIntfRxTxStatsEntry 13 }
ospfIntfNbrChangeStats OBJECT-TYPE
SYNTAX SEQUENCE OF OspfIntfNbrChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Interface Neighbour change Statistics."
::= { ospfInterface 2 }
ospfIntfNbrChangeStatsEntry OBJECT-TYPE
SYNTAX OspfIntfNbrChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OSPF interface Neighbour Change statistics."
INDEX { ospfIntfNbrIndex }
::= { ospfIntfNbrChangeStats 1 }
OspfIntfNbrChangeStatsEntry ::= SEQUENCE {
ospfIntfNbrIndex Integer32,
ospfIntfNbrhello Counter32,
ospfIntfNbrStart Counter32,
ospfIntfNbrAdjointOk Counter32,
ospfIntfNbrNegotiationDone Counter32,
ospfIntfNbrExchangeDone Counter32,
ospfIntfNbrBadRequests Counter32,
ospfIntfNbrBadSequence Counter32,
ospfIntfNbrLoadingDone Counter32,
ospfIntfNbrN1way Counter32,
ospfIntfNbrRstAd Counter32,
ospfIntfNbrDown Counter32,
ospfIntfNbrN2way Counter32
}
ospfIntfNbrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the OSPF Interface for which these statistics apply."
::= { ospfIntfNbrChangeStatsEntry 1 }
ospfIntfNbrhello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received from neighbours
in this OSPF interface."
::= { ospfIntfNbrChangeStatsEntry 2 }
ospfIntfNbrStart OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of neighbours in this state (i.e. an indication
that Hello packets should now be sent to the neighbour at intervals
of HelloInterval seconds.) in this OSPF interface."
::= { ospfIntfNbrChangeStatsEntry 3 }
ospfIntfNbrAdjointOk OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of decisions to be made (again) as to whether
an adjacency should be established/maintained with the neighbour.
for this OSPF interface."
::= { ospfIntfNbrChangeStatsEntry 4 }
ospfIntfNbrNegotiationDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of neighbours in this state wherein the
Master/slave relationship has been negotiated, and sequence
numbers have been exchanged, for this OSPF interface."
::= { ospfIntfNbrChangeStatsEntry 5 }
ospfIntfNbrExchangeDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of neighbours in this state (i.e. in an
adjacency's final state) having transimitted a full sequence
of Database Description packets, for this OSPF interface."
::= { ospfIntfNbrChangeStatsEntry 6 }
ospfIntfNbrBadRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Requests which have been received
for a link state advertisement not contained in the database for
this interface."
::= { ospfIntfNbrChangeStatsEntry 7 }
ospfIntfNbrBadSequence OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets which have been
received that either
a) has an unexpected DD sequence number
b) Unexpectedly has the init bit set
c) Has an options field differing from the last Options field
received in a Database Description packet.
Any of these conditions indicate that some error has occured during
adjacency establishment for this interface."
::= { ospfIntfNbrChangeStatsEntry 8 }
ospfIntfNbrLoadingDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of link state updates received for all
out-of-date portions of the database for this OSPF interface."
::= { ospfIntfNbrChangeStatsEntry 9 }
ospfIntfNbrN1way OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received from neighbours, in
which this router is not mentioned for this OSPF interface."
::= { ospfIntfNbrChangeStatsEntry 10 }
ospfIntfNbrRstAd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of times the Neighbour adjacency has been reset
on this interface."
::= { ospfIntfNbrChangeStatsEntry 11 }
ospfIntfNbrDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Neighbouring routers down (i.e. in the initial
state of a neighbour conversation.) for this interface."
::= { ospfIntfNbrChangeStatsEntry 12 }
ospfIntfNbrN2way OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received from neighbours, in
which this router is mentioned for this OSPF interface."
::= { ospfIntfNbrChangeStatsEntry 13 }
ospfIntfChangeStats OBJECT-TYPE
SYNTAX SEQUENCE OF OspfIntfChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Interface change Statistics."
::= { ospfInterface 3 }
ospfIntfChangeStatsEntry OBJECT-TYPE
SYNTAX OspfIntfChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OSPF interface Change statistics."
INDEX { ospfIntfIndex }
::= { ospfIntfChangeStats 1 }
OspfIntfChangeStatsEntry ::= SEQUENCE {
ospfIntfIndex Integer32,
ospfIntfHello Counter32,
ospfIntfDown Counter32,
ospfIntfLoop Counter32,
ospfIntfUnloop Counter32,
ospfIntfWaitTimer Counter32,
ospfIntfBackup Counter32,
ospfIntfNbrChange Counter32
}
ospfIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the OSPF Interface for which these statistics apply."
::= { ospfIntfChangeStatsEntry 1 }
ospfIntfHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets sent by this interface."
::= { ospfIntfChangeStatsEntry 2 }
ospfIntfDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the interface was down."
::= { ospfIntfChangeStatsEntry 3 }
ospfIntfLoop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the interface was no longer connected to
the attatched network."
::= { ospfIntfChangeStatsEntry 4 }
ospfIntfUnloop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the interface, connected back to
the attatched network."
::= { ospfIntfChangeStatsEntry 5 }
ospfIntfWaitTimer OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the Wait Timer has been fired,
(indicating the end of the waiting period that is required
before electing a (Backup) Designated Router) for this
OSPF interface."
::= { ospfIntfChangeStatsEntry 6 }
ospfIntfBackup OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Backup Designated Routers on the attatched
network for this OSPF interface."
::= { ospfIntfChangeStatsEntry 7 }
ospfIntfNbrChange OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of changes in the set of bidirectional neighbours
associated with the interface for this OSPF interface."
::= { ospfIntfChangeStatsEntry 8 }
ospfIntfErrorStats OBJECT-TYPE
SYNTAX SEQUENCE OF OspfIntfErrorStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Interface Error Statistics."
::= { ospfInterface 4 }
ospfIntfErrorStatsEntry OBJECT-TYPE
SYNTAX OspfIntfErrorStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Error Statistics for an OSPF area."
INDEX { ospfIntfErrIndex }
::= { ospfIntfErrorStats 1 }
OspfIntfErrorStatsEntry ::= SEQUENCE {
ospfIntfErrIndex Integer32,
ospfIntfErrAuthFailure Counter32,
ospfIntfErrNetmaskMismatch Counter32,
ospfIntfErrHelloMismatch Counter32,
ospfIntfErrDeadMismatch Counter32,
ospfIntfErrOptionsMismatch Counter32,
ospfIntfErrUnknownNbr Counter32,
ospfIntfErrAreaMismatch Counter32,
ospfIntfErrInvalidSelfOrigLSA Counter32
}
ospfIntfErrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the OSPF Intf for which these statistics apply."
::= { ospfIntfErrorStatsEntry 1 }
ospfIntfErrAuthFailure OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a wrong password in
this area."
::= { ospfIntfErrorStatsEntry 2 }
ospfIntfErrNetmaskMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a wrong netmask in
this area."
::= { ospfIntfErrorStatsEntry 3 }
ospfIntfErrHelloMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different hello interval
in this area."
::= { ospfIntfErrorStatsEntry 4 }
ospfIntfErrDeadMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different dead interval
in this area."
::= { ospfIntfErrorStatsEntry 5 }
ospfIntfErrOptionsMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different options
in this area."
::= { ospfIntfErrorStatsEntry 6 }
ospfIntfErrUnknownNbr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received from an unknown neighbor
in this area."
::= { ospfIntfErrorStatsEntry 7 }
ospfIntfErrAreaMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a wrong area."
::= { ospfIntfErrorStatsEntry 8 }
ospfIntfErrInvalidSelfOrigLSA OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with invalid self-orig LSAs."
::= { ospfIntfErrorStatsEntry 9 }
-- Ospf General Statistics contains the cumulative stats for all
-- areas / interfaces
ospfCumRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all OSPF packets received on all OSPF areas
and interfaces."
::= { ospfCumRxTxStats 1 }
ospfCumTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all OSPF packets transmitted on all OSPF areas
and interfaces."
::= { ospfCumRxTxStats 2 }
ospfCumRxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Hello packets received on all OSPF areas
and interfaces."
::= { ospfCumRxTxStats 3 }
ospfCumTxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Hello packets transmitted on all OSPF areas
and interfaces."
::= { ospfCumRxTxStats 4 }
ospfCumRxDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Database Description packets received on
all OSPF areas and interfaces."
::= { ospfCumRxTxStats 5 }
ospfCumTxDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Database Description packets transmitted on
all OSPF areas and interfaces."
::= { ospfCumRxTxStats 6 }
ospfCumRxlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Link State Request packets received on
all OSPF areas and interfaces."
::= { ospfCumRxTxStats 7 }
ospfCumTxlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Link State Request packets transmitted on
all OSPF areas and interfaces."
::= { ospfCumRxTxStats 8 }
ospfCumRxlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Link State Acknowledgement packets received
on all OSPF areas and interfaces."
::= { ospfCumRxTxStats 9 }
ospfCumTxlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Link State Acknowledgement packets transmitted
on all OSPF areas and interfaces."
::= { ospfCumRxTxStats 10 }
ospfCumRxlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Link State Update packets received
on all OSPF areas and interfaces."
::= { ospfCumRxTxStats 11 }
ospfCumTxlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Link State Update packets transmitted
on all OSPF areas and interfaces."
::= { ospfCumRxTxStats 12 }
ospfCumNbrhello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of all Hello packets received from neighbours
on all OSPF areas and interfaces."
::= { ospfCumNbrChangeStats 1 }
ospfCumNbrStart OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of neighbours in this state (i.e. an indication
that Hello packets should now be sent to the neighbour at intervals
of HelloInterval seconds.) across all OSPF areas and interfaces."
::= { ospfCumNbrChangeStats 2 }
ospfCumNbrAdjointOk OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of decisions to be made (again) as to whether
an adjacency should be established/maintained with the neighbour
across all OSPF areas and interfaces."
::= { ospfCumNbrChangeStats 3 }
ospfCumNbrNegotiationDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of neighbours in this state wherein the
Master/slave relationship has been negotiated, and sequence
numbers have been exchanged, across all OSPF areas and
interfaces."
::= { ospfCumNbrChangeStats 4 }
ospfCumNbrExchangeDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of neighbours in this state (i.e. in an
adjacency's final state) having transimitted a full sequence
of Database Description packets, across all OSPF areas
and interfaces."
::= { ospfCumNbrChangeStats 5 }
ospfCumNbrBadRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of Link State Requests which have been received
for a link state advertisement not contained in the database across
all interfaces and OSPF areas."
::= { ospfCumNbrChangeStats 6 }
ospfCumNbrBadSequence OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of Database Description packets which have been
received that either
a) has an unexpected DD sequence number
b) Unexpectedly has the init bit set
c) Has an options field differing from the last Options field
received in a Database Description packet.
Any of these conditions indicate that some error has occured during
adjacency establishment for all OSPF areas and interfaces."
::= { ospfCumNbrChangeStats 7 }
ospfCumNbrLoadingDone OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of link state updates received for all
out-of-date portions of the database across all OSPF areas
and interfaces."
::= { ospfCumNbrChangeStats 8 }
ospfCumNbrN1way OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of Hello packets received from neighbours, in
which this router is not mentioned across all OSPF interfaces
and areas."
::= { ospfCumNbrChangeStats 9 }
ospfCumNbrRstAd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of times the Neighbour adjacency has been reset
across all OPSF areas and interfaces."
::= { ospfCumNbrChangeStats 10 }
ospfCumNbrDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Neighbouring routers down (i.e. in the initial
state of a neighbour conversation.) across all OSPF areas and
interfaces."
::= { ospfCumNbrChangeStats 11 }
ospfCumNbrN2way OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of Hello packets received from neighbours, in
which this router is mentioned across all OSPF interfaces
and areas."
::= { ospfCumNbrChangeStats 12 }
ospfCumIntfHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of Hello packets sent on all interfaces
and areas"
::= { ospfCumIntfChangeStats 1 }
ospfCumIntfDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of interfaces down in all OSPF areas."
::= { ospfCumIntfChangeStats 2 }
ospfCumIntfLoop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total of interfaces no longer connected to
the attatched network across all OSPF areas and interfaces."
::= { ospfCumIntfChangeStats 3 }
ospfCumIntfUnloop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of interfaces, connected to
the attatched network in all OSPF areas."
::= { ospfCumIntfChangeStats 4 }
ospfCumIntfWaitTimer OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of times the Wait Timer has been fired,
(indicating the end of the waiting period that is required
before electing a (Backup) Designated Router) across all
OSPF areas and interfaces."
::= { ospfCumIntfChangeStats 5 }
ospfCumIntfBackup OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of Backup Designated Routers on the attatched
network for all OSPF areas and interfaces."
::= { ospfCumIntfChangeStats 6 }
ospfCumIntfNbrChange OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of changes in the set of bidirectional
neighbours associated with any interface across all OSPF areas."
::= { ospfCumIntfChangeStats 7 }
ospfTmrsKckOffHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of times the Hello timer has been fired
(which triggers the send of a Hello packet) across all OPSF
areas and interfaces."
::= { ospfTimersKickOffStats 1 }
ospfTmrsKckOffRetransmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of times the Retransmit timer has been
fired across all OPSF areas and interfaces."
::= { ospfTimersKickOffStats 2 }
ospfTmrsKckOffLsaLock OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of times the Lsa Lock timer has been
fired across all OSPF areas and interfaces."
::= { ospfTimersKickOffStats 3 }
ospfTmrsKckOffLsaAck OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of times the Lsa Ack timer has been
fired across all ospf areas and interfaces."
::= { ospfTimersKickOffStats 4 }
ospfTmrsKckOffDbage OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the Dbage has been fired."
::= { ospfTimersKickOffStats 5 }
ospfTmrsKckOffSummary OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the Summary timer has been fired."
::= { ospfTimersKickOffStats 6 }
ospfTmrsKckOffAseExport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the ASE Export timer has been fired."
::= { ospfTimersKickOffStats 7 }
-- IGMP Snooping statistics
igmpSnoopStats OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics for IGMP Snooping."
::= { igmpStats 1 }
igmpSnoopStatsEntry OBJECT-TYPE
SYNTAX IgmpSnoopStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics for IGMP Snooping."
INDEX { igmpSnoopVlanIndex }
::= { igmpSnoopStats 1 }
IgmpSnoopStatsEntry ::= SEQUENCE {
igmpSnoopVlanIndex INTEGER,
rxIgmpValidPkts Counter32,
rxIgmpInvalidPkts Counter32,
rxIgmpGenQueries Counter32,
rxIgmpGrpSpecificQueries Counter32,
rxIgmpLeaves Counter32,
rxIgmpDiscardPkts Counter32,
rxIgmpReports Counter32,
rxIgmpPimHellos Counter32,
txIgmpGenQueries Counter32,
txIgmpGrpSpecificQueries Counter32,
txIgmpReports Counter32,
igmpClearVlanStats INTEGER,
txIgmpLeaves Counter32,
rxIgmpGroupSourceSpecificQueries Counter32,
rxIgmpV3CurrentStateRecords Counter32,
rxIgmpV3SourceListChangeRecords Counter32,
rxIgmpV3FilterChangeRecords Counter32
}
igmpSnoopVlanIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the VLAN for which these statistics apply."
::= { igmpSnoopStatsEntry 1 }
rxIgmpValidPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of valid IGMP packets received
on this VLAN."
::= { igmpSnoopStatsEntry 2 }
rxIgmpInvalidPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid IGMP packets received
on this VLAN."
::= { igmpSnoopStatsEntry 3 }
rxIgmpGenQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP General Query packets received
on this VLAN."
::= { igmpSnoopStatsEntry 4 }
rxIgmpGrpSpecificQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Group Specific Query packets received
on this VLAN."
::= { igmpSnoopStatsEntry 5 }
rxIgmpLeaves OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Leave packets received
on this VLAN."
::= { igmpSnoopStatsEntry 6 }
rxIgmpReports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Report packets received
on this VLAN."
::= { igmpSnoopStatsEntry 7 }
txIgmpGrpSpecificQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Group Specific Query packets
transmitted on this VLAN."
::= { igmpSnoopStatsEntry 8 }
txIgmpReports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Report packets transmitted
on this VLAN."
::= { igmpSnoopStatsEntry 9 }
txIgmpLeaves OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Leave packets transmitted
on this VLAN."
::= { igmpSnoopStatsEntry 10 }
rxIgmpGroupSourceSpecificQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Group Source Specific (GSSQ) Queries received
on this VLAN."
::= { igmpSnoopStatsEntry 11 }
rxIgmpV3CurrentStateRecords OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Current State Records (CSRs) received
on this VLAN."
::= { igmpSnoopStatsEntry 12 }
rxIgmpV3SourceListChangeRecords OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Source List Change Records (SLCRs) received
on this VLAN."
::= { igmpSnoopStatsEntry 13 }
rxIgmpV3FilterChangeRecords OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Filter Mode Change Records (FMCRs) received
on this VLAN."
::= { igmpSnoopStatsEntry 14 }
txIgmpGenQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP General Query packets send
on this VLAN."
::= { igmpSnoopStatsEntry 16 }
rxIgmpDiscardPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP packets discarded
on this VLAN."
::= { igmpSnoopStatsEntry 17 }
rxIgmpPimHellos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Pim Hello packets received
on this VLAN."
::= { igmpSnoopStatsEntry 18 }
igmpClearVlanStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the statistics for this
snooping VLAN."
::= { igmpSnoopStatsEntry 19 }
igmpClearAllStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the IGMP statistics."
::= { igmpStats 2 }
igmpStatsTotalIgmpGroups OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP groups."
::= { igmpStats 3 }
igmpStatsTotalIpmcGroups OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPMC groups."
::= { igmpStats 4 }
ipv6InReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of input datagrams received from
interfaces, including those received in error."
::= { ipv6Stats 1 }
ipv6InMcasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast packets received from
interfaces, including those received in error."
::= { ipv6Stats 2 }
ipv6InDelivers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams given to upper layer - ICMP/UDP"
::= { ipv6Stats 3 }
ipv6InDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams discarded despite no errors"
::= { ipv6Stats 4 }
ipv6InHdrerrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams with error in IPv6/Option headers"
::= { ipv6Stats 5 }
ipv6InAddrerrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams with error in destination address"
::= { ipv6Stats 6 }
ipv6InUnkprots OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams with unknown/unsupported protocol"
::= { ipv6Stats 7 }
ipv6InTruncs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams with insufficient data"
::= { ipv6Stats 8 }
ipv6OutMcasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total sent multicast pkts"
::= { ipv6Stats 10 }
ipv6ForwDgrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams attempted to be forwarded"
::= { ipv6Stats 11 }
ipv6TooBigerrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams which could not be forwarded
as their size exceeds (Path) MTU"
::= { ipv6Stats 12 }
ipv6OutReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams attempted to be sent"
::= { ipv6Stats 13 }
ipv6OutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total outgoing Datagrams discarded despite no errors"
::= { ipv6Stats 14 }
ipv6OutNorts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams discarded due to no routes"
::= { ipv6Stats 15 }
ipv6Reasmreqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams needing reassembly"
::= { ipv6Stats 16 }
ipv6Reasmoks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams successfully reassembled"
::= { ipv6Stats 17 }
ipv6Reasmfails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams for witch reassembly failured"
::= { ipv6Stats 18 }
ipv6Fragoks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams successfully fragmented"
::= { ipv6Stats 19 }
ipv6Fragfails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams for witch fragmentation failured"
::= { ipv6Stats 20 }
ipv6Fragcreates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of fragments created"
::= { ipv6Stats 21 }
ipv6InNsols OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of received Neighbor Solicitations"
::= { ipv6Stats 22 }
ipv6InNadvs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of received Neighbor Advertisements"
::= { ipv6Stats 23 }
ipv6InRoutsols OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of received Router Solicitations"
::= { ipv6Stats 25 }
ipv6InRoutadvs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of received Router Advertisements"
::= { ipv6Stats 26 }
ipv6InRoutRedirs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of received Router Redirect messages"
::= { ipv6Stats 27 }
ipv6OutNsols OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of sent Neighbor Solicitations"
::= { ipv6Stats 28 }
ipv6OutNadvs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of sent Neighbor Advertisements"
::= { ipv6Stats 29 }
ipv6OutRoutadvs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of sent Router Advertisements"
::= { ipv6Stats 30 }
ipv6OutRedirs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of sent Redirects"
::= { ipv6Stats 31 }
ipv6OutRoutSols OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of sent Router Solicitations"
::= { ipv6Stats 32 }
-- Please see tIp6If structure: u4RaSchedTime and u4RaSentTime are interface
-- parameters. They are not part of interface statistics (tIp6IfStats stats;).
-- ipv6RaSchedTime OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Next multicast Router Advertisement scheduled time"
-- ::= { ipv6Stats 36 }
-- ipv6RaSentTime OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Last Router Advertisement sent time"
-- ::= { ipv6Stats 37 }
ipv6icmpInMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ICMP messages received."
::= { ipv6Stats 39 }
ipv6icmpInErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ICMP messages attempted to send."
::= { ipv6Stats 40 }
ipv6icmpInBadcode OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ICMP messages in bad code."
::= { ipv6Stats 41 }
ipv6icmpInToobig OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP too big messages received."
::= { ipv6Stats 42 }
ipv6icmpInDstUnreach OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Destination Unreachable messages received."
::= { ipv6Stats 43 }
ipv6icmpInTmexceeded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Time Exceeded messages received."
::= { ipv6Stats 44 }
ipv6icmpInParamprob OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Parameter Problem messages received."
::= { ipv6Stats 45 }
ipv6icmpInEchoReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Echo request messages received."
::= { ipv6Stats 46 }
ipv6icmpInEchoResp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Echo Reply messages received."
::= { ipv6Stats 47 }
ipv6icmpOutMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ICMP messages which this entity
attempted to send."
::= { ipv6Stats 48 }
ipv6icmpOutErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP messages which this entity did not
send due to problems discovered within ICMP
such as a lack of buffers."
::= { ipv6Stats 49 }
ipv6icmpOutDstUnreach OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Destination Unreachable messages sent."
::= { ipv6Stats 50 }
ipv6icmpOutToobig OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP too big messages sent."
::= { ipv6Stats 51 }
ipv6icmpOutTmexceeded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Time Exceeded messages sent."
::= { ipv6Stats 52 }
ipv6icmpOutParamprob OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Parameter Problem messages sent."
::= { ipv6Stats 53 }
ipv6icmpOutEchoReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Echo request messages sent."
::= { ipv6Stats 54 }
ipv6icmpOutEchoResp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Echo Reply messages sent."
::= { ipv6Stats 55 }
ipv6icmpInRouterSol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP router solicitations received."
::= { ipv6Stats 56 }
ipv6icmpInRouterAdv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP router advertisements received."
::= { ipv6Stats 57 }
ipv6icmpInNeighSol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP neighbor solicitations received."
::= { ipv6Stats 58 }
ipv6icmpInNeighAdv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP neighbor advertisements received."
::= { ipv6Stats 59 }
ipv6icmpInRedir OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Redirect messages received."
::= { ipv6Stats 60 }
ipv6icmpOutRouterSol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP router solicitations sent."
::= { ipv6Stats 61 }
ipv6icmpOutRouterAdv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP router advertisements sent."
::= { ipv6Stats 62 }
ipv6icmpOutNeighSol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP neighbor solicitations sent."
::= { ipv6Stats 63 }
ipv6icmpOutNeighAdv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP neighbor advertisements sent."
::= { ipv6Stats 64 }
ipv6icmpOutRedir OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Redirect messages sent."
::= { ipv6Stats 65 }
ipv6udpInDgrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of UDP received datagrams."
::= { ipv6Stats 66 }
ipv6udpInErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of UDP error encountered during
processing of packet."
::= { ipv6Stats 67 }
ipv6udpOutDgrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of UDP datagrams passed to IP6 layer."
::= { ipv6Stats 68 }
ipv6udpNumPorts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of UDP ports that are currently open."
::= { ipv6Stats 69 }
ipv6icmpInAdminProhib OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of received Destination Unreachable
ICMP packets."
::= { ipv6Stats 70 }
ipv6icmpOutAdminProhib OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of sent Destination Unreachable
ICMP packets."
::= { ipv6Stats 71 }
-- Ospf3 Statistics
-- Ospf3 Statistics for all interfaces and Ospf3 areas
ospf3GeneralStats OBJECT IDENTIFIER ::= { ospf3Stats 1 }
ospf3CumRxTxDisdStats OBJECT IDENTIFIER ::= { ospf3GeneralStats 1 }
ospf3CumNbrChangeStats OBJECT IDENTIFIER ::= { ospf3GeneralStats 2 }
ospf3CumIntfChangeStats OBJECT IDENTIFIER ::= { ospf3GeneralStats 3 }
ospf3TimersKickOffStats OBJECT IDENTIFIER ::= { ospf3GeneralStats 4 }
-- Ospf3 Statistics / Area
ospf3Area OBJECT IDENTIFIER ::= { ospf3Stats 2 }
ospf3AreaRxTxDisdStats OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3AreaRxTxDisdStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Ospf3 Area Rx/Tx Statistics."
::= { ospf3Area 1 }
ospf3AreaRxTxDisdStatsEntry OBJECT-TYPE
SYNTAX Ospf3AreaRxTxDisdStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Rx Tx packet Statistics about a Ospf3 area."
INDEX { ospf3AreaRxTxDisdIndex }
::= { ospf3AreaRxTxDisdStats 1 }
Ospf3AreaRxTxDisdStatsEntry ::= SEQUENCE {
ospf3AreaRxTxDisdIndex Integer32,
ospf3AreaRxPkts Counter32,
ospf3AreaTxPkts Counter32,
ospf3AreaDisdPkts Counter32,
ospf3AreaRxHello Counter32,
ospf3AreaTxHello Counter32,
ospf3AreaDisdHello Counter32,
ospf3AreaRxDatabase Counter32,
ospf3AreaTxDatabase Counter32,
ospf3AreaDisdDatabase Counter32,
ospf3AreaRxlsReqs Counter32,
ospf3AreaTxlsReqs Counter32,
ospf3AreaDisdlsReqs Counter32,
ospf3AreaRxlsAcks Counter32,
ospf3AreaTxlsAcks Counter32,
ospf3AreaDisdlsAcks Counter32,
ospf3AreaRxlsUpdates Counter32,
ospf3AreaTxlsUpdates Counter32,
ospf3AreaDisdlsUpdates Counter32
}
ospf3AreaRxTxDisdIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ospf3 Area for which these statistics apply."
::= { ospf3AreaRxTxDisdStatsEntry 1 }
ospf3AreaRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Ospf3 packets received in this Ospf3 area."
::= { ospf3AreaRxTxDisdStatsEntry 2 }
ospf3AreaTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Ospf3 packets transmitted in this Ospf3 area."
::= { ospf3AreaRxTxDisdStatsEntry 3 }
ospf3AreaDisdPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Ospf3 packets discaded in this Ospf3 area."
::= { ospf3AreaRxTxDisdStatsEntry 4 }
ospf3AreaRxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received in this Ospf3 area."
::= { ospf3AreaRxTxDisdStatsEntry 5 }
ospf3AreaTxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets transmitted in this Ospf3
area."
::= { ospf3AreaRxTxDisdStatsEntry 6 }
ospf3AreaDisdHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets discaded in this Ospf3
area."
::= { ospf3AreaRxTxDisdStatsEntry 7 }
ospf3AreaRxDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets transmitted
for this Ospf3 area."
::= { ospf3AreaRxTxDisdStatsEntry 8 }
ospf3AreaTxDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets transmitted
for this Ospf3 area."
::= { ospf3AreaRxTxDisdStatsEntry 9 }
ospf3AreaDisdDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets discarded
for this Ospf3 area."
::= { ospf3AreaRxTxDisdStatsEntry 10 }
ospf3AreaRxlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Request packets received for
this Ospf3 area."
::= { ospf3AreaRxTxDisdStatsEntry 11 }
ospf3AreaTxlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Request packets transmitted for
this Ospf3 area."
::= { ospf3AreaRxTxDisdStatsEntry 12 }
ospf3AreaDisdlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Request packets discarded for
this Ospf3 area."
::= { ospf3AreaRxTxDisdStatsEntry 13 }
ospf3AreaRxlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Acknowledgement packets received for
this Ospf3 area."
::= { ospf3AreaRxTxDisdStatsEntry 14 }
ospf3AreaTxlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Acknowledgement packets transmitted
for this Ospf3 area."
::= { ospf3AreaRxTxDisdStatsEntry 15 }
ospf3AreaDisdlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Acknowledgement packets discarded
for this Ospf3 area."
::= { ospf3AreaRxTxDisdStatsEntry 16 }
ospf3AreaRxlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Update packets received for
this Ospf3 area."
::= { ospf3AreaRxTxDisdStatsEntry 17 }
ospf3AreaTxlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Update packets transmitted for
this Ospf3 area."
::= { ospf3AreaRxTxDisdStatsEntry 18 }
ospf3AreaDisdlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Update packets discarded for
this Ospf3 area."
::= { ospf3AreaRxTxDisdStatsEntry 19 }
ospf3AreaNbrChangeStats OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3AreaNbrChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Ospf3 Neighbor change Statistics."
::= { ospf3Area 2 }
ospf3AreaNbrChangeStatsEntry OBJECT-TYPE
SYNTAX Ospf3AreaNbrChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ospf3 Neighbor Change statistics."
INDEX { ospf3AreaNbrIndex }
::= { ospf3AreaNbrChangeStats 1 }
Ospf3AreaNbrChangeStatsEntry ::= SEQUENCE {
ospf3AreaNbrIndex Integer32,
ospf3AreaNbrDown Counter32,
ospf3AreaNbrAttempt Counter32,
ospf3AreaNbrInit Counter32,
ospf3AreaNbrN2way Counter32,
ospf3AreaNbrExStart Counter32,
ospf3AreaNbrExchange Counter32,
ospf3AreaNbrLoading Counter32,
ospf3AreaNbrFull Counter32,
ospf3AreaNbrAllEvents Counter32
}
ospf3AreaNbrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Ospf3 Area for which these statistics apply."
::= { ospf3AreaNbrChangeStatsEntry 1 }
ospf3AreaNbrDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on this area
have changed into DOWN state."
::= { ospf3AreaNbrChangeStatsEntry 2 }
ospf3AreaNbrAttempt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on this area
have changed into ATTEMPT state."
::= { ospf3AreaNbrChangeStatsEntry 3 }
ospf3AreaNbrInit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on this area
have changed into INIT state."
::= { ospf3AreaNbrChangeStatsEntry 4 }
ospf3AreaNbrN2way OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on this area
have changed into 2WAY state."
::= { ospf3AreaNbrChangeStatsEntry 5 }
ospf3AreaNbrExStart OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on this area
have changed into EXSTART state."
::= { ospf3AreaNbrChangeStatsEntry 6 }
ospf3AreaNbrExchange OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on this area
have changed into EXCHANGE state."
::= { ospf3AreaNbrChangeStatsEntry 7 }
ospf3AreaNbrLoading OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on this area
have changed into LOADING state."
::= { ospf3AreaNbrChangeStatsEntry 8 }
ospf3AreaNbrFull OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on this area
have changed into FULL state."
::= { ospf3AreaNbrChangeStatsEntry 9 }
ospf3AreaNbrAllEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on this area
have changed state or an error had occured."
::= { ospf3AreaNbrChangeStatsEntry 10 }
ospf3AreaIntfChangeStats OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3AreaIntfChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Ospf3 Interface change Statistics."
::= { ospf3Area 3 }
ospf3AreaIntfChangeStatsEntry OBJECT-TYPE
SYNTAX Ospf3AreaIntfChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ospf3 interface Change statistics."
INDEX { ospf3AreaIntfIndex }
::= { ospf3AreaIntfChangeStats 1 }
Ospf3AreaIntfChangeStatsEntry ::= SEQUENCE {
ospf3AreaIntfIndex Integer32,
ospf3AreaIntfDown Counter32,
ospf3AreaIntfLoop Counter32,
ospf3AreaIntfWaiting Counter32,
ospf3AreaIntfPtop Counter32,
ospf3AreaIntfDr Counter32,
ospf3AreaIntfBackup Counter32,
ospf3AreaIntfDrOther Counter32,
ospf3AreaIntfAllEvents Counter32
}
ospf3AreaIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Ospf3 Interface for which these statistics apply."
::= { ospf3AreaIntfChangeStatsEntry 1 }
ospf3AreaIntfDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of changes into the DOWN State of the interfaces
associated with this OSPF area."
::= { ospf3AreaIntfChangeStatsEntry 2 }
ospf3AreaIntfLoop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of changes into the LOOP State of the interfaces
associated with this OSPF area."
::= { ospf3AreaIntfChangeStatsEntry 3 }
ospf3AreaIntfWaiting OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of changes into the WAITING State of the interfaces
associated with this OSPF area."
::= { ospf3AreaIntfChangeStatsEntry 4 }
ospf3AreaIntfPtop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of changes into the PTOP State of the interfaces
associated with this OSPF area."
::= { ospf3AreaIntfChangeStatsEntry 5 }
ospf3AreaIntfDr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of changes into the DR State of the interfaces
associated with this OSPF area."
::= { ospf3AreaIntfChangeStatsEntry 6 }
ospf3AreaIntfBackup OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of changes into the BACKUP State of the interfaces
associated with this OSPF area."
::= { ospf3AreaIntfChangeStatsEntry 7 }
ospf3AreaIntfDrOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of changes into the DROTHER State of the interfaces
associated with this OSPF area."
::= { ospf3AreaIntfChangeStatsEntry 8 }
ospf3AreaIntfAllEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of State changes of the interfaces
associated with this OSPF area"
::= { ospf3AreaIntfChangeStatsEntry 9 }
ospf3AreaErrorStats OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3AreaErrorStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Ospf3 Interface Error Statistics."
::= { ospf3Area 4 }
ospf3AreaErrorStatsEntry OBJECT-TYPE
SYNTAX Ospf3AreaErrorStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Error Statistics for an Ospf3 area."
INDEX { ospf3AreaErrIndex }
::= { ospf3AreaErrorStats 1 }
Ospf3AreaErrorStatsEntry ::= SEQUENCE {
ospf3AreaErrIndex Integer32,
ospf3AreaErrRxOnPasv Counter32,
ospf3AreaErrRxOspfOff Counter32,
ospf3AreaErrRxOnNotup Counter32,
ospf3AreaErrRxVerMismatch Counter32,
ospf3AreaErrRxZeroRTRID Counter32,
ospf3AreaErrRxSameRTRID Counter32,
ospf3AreaErrRxMismatchInstID Counter32,
ospf3AreaErrBadAreaID Counter32,
ospf3AreaErrBadDestAddr Counter32,
ospf3AreaErrBadChecksum Counter32,
ospf3AreaErrBadNeighbour Counter32,
ospf3AreaErrBadPktType Counter32,
ospf3AreaErrHelloMismatch Counter32,
ospf3AreaErrOptionsMismatch Counter32,
ospf3AreaErrDeadMismatch Counter32,
ospf3AreaErrHelloNoNbr Counter32
}
ospf3AreaErrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Ospf3 Area for which these statistics apply."
::= { ospf3AreaErrorStatsEntry 1 }
ospf3AreaErrRxOnPasv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by all of the interfaces in this area that are
received on a passive interface."
::= { ospf3AreaErrorStatsEntry 2 }
ospf3AreaErrRxOspfOff OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by all of the interfaces in this area that are
received while OSPF was disabled."
::= { ospf3AreaErrorStatsEntry 3 }
ospf3AreaErrRxOnNotup OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by all of the interfaces in this area that are
received while the interface was disabled."
::= { ospf3AreaErrorStatsEntry 4 }
ospf3AreaErrRxVerMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by all of the interfaces in this area that have
an OSPF version number not equal to the one of the interface."
::= { ospf3AreaErrorStatsEntry 5 }
ospf3AreaErrRxZeroRTRID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by all of the interfaces in this area that have
a RouterID of 0."
::= { ospf3AreaErrorStatsEntry 6 }
ospf3AreaErrRxSameRTRID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by all of the interfaces in this area that have
the same RouterID as this Router."
::= { ospf3AreaErrorStatsEntry 7 }
ospf3AreaErrRxMismatchInstID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by all of the interfaces in this area that have
an instance number not equal to the one of the interface."
::= { ospf3AreaErrorStatsEntry 8 }
ospf3AreaErrBadAreaID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by all of the interfaces in this area that have
an area number not equal to the one of the area of the interface."
::= { ospf3AreaErrorStatsEntry 9 }
ospf3AreaErrBadDestAddr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets discarded by all of the interfaces in this area because of
a destination address mismatch."
::= { ospf3AreaErrorStatsEntry 10 }
ospf3AreaErrBadChecksum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets discarded by all of the interfaces in this area because of
a bad checksum."
::= { ospf3AreaErrorStatsEntry 11 }
ospf3AreaErrBadNeighbour OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets discarded by all of the interfaces in this area because
they could not be associated with any neighbor."
::= { ospf3AreaErrorStatsEntry 12 }
ospf3AreaErrBadPktType OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets discarded by all of the interfaces in this area because
the packet type was not recognized."
::= { ospf3AreaErrorStatsEntry 13 }
ospf3AreaErrHelloMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different hello interval
by all of the interfaces in this area ."
::= { ospf3AreaErrorStatsEntry 14 }
ospf3AreaErrOptionsMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different options
by all of the interfaces in this area ."
::= { ospf3AreaErrorStatsEntry 15 }
ospf3AreaErrDeadMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different dead interval
in this area."
::= { ospf3AreaErrorStatsEntry 16 }
ospf3AreaErrHelloNoNbr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received from an unknown neighbor
when all of the interfaces in this area has a Network Type of NBMA or PTOMP."
::= { ospf3AreaErrorStatsEntry 17 }
-- Ospf3 Statistics / Interface
ospf3Interface OBJECT IDENTIFIER ::= { ospf3Stats 3 }
ospf3IntfRxTxDisdStats OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3IntfRxTxDisdStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Ospf3 Intf Rx/Tx Statistics."
::= { ospf3Interface 1 }
ospf3IntfRxTxDisdStatsEntry OBJECT-TYPE
SYNTAX Ospf3IntfRxTxDisdStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Rx Tx packet Statistics about a Ospf3 area."
INDEX { ospf3IntfRxTxDisdIndex }
::= { ospf3IntfRxTxDisdStats 1 }
Ospf3IntfRxTxDisdStatsEntry ::= SEQUENCE {
ospf3IntfRxTxDisdIndex Integer32,
ospf3IntfRxPkts Counter32,
ospf3IntfTxPkts Counter32,
ospf3IntfDisdPkts Counter32,
ospf3IntfRxHello Counter32,
ospf3IntfTxHello Counter32,
ospf3IntfDisdHello Counter32,
ospf3IntfRxDatabase Counter32,
ospf3IntfTxDatabase Counter32,
ospf3IntfDisdDatabase Counter32,
ospf3IntfRxlsReqs Counter32,
ospf3IntfTxlsReqs Counter32,
ospf3IntfDisdlsReqs Counter32,
ospf3IntfRxlsAcks Counter32,
ospf3IntfTxlsAcks Counter32,
ospf3IntfDisdlsAcks Counter32,
ospf3IntfRxlsUpdates Counter32,
ospf3IntfTxlsUpdates Counter32,
ospf3IntfDisdlsUpdates Counter32
}
ospf3IntfRxTxDisdIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ospf3 Intf for which these statistics apply."
::= { ospf3IntfRxTxDisdStatsEntry 1 }
ospf3IntfRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Ospf3 packets received on this Ospf3 interface."
::= { ospf3IntfRxTxDisdStatsEntry 2 }
ospf3IntfTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Ospf3 packets transmitted on this Ospf3 interface."
::= { ospf3IntfRxTxDisdStatsEntry 3 }
ospf3IntfDisdPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Ospf3 packets discaded on this Ospf3 interface."
::= { ospf3IntfRxTxDisdStatsEntry 4 }
ospf3IntfRxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received on this Ospf3 interface."
::= { ospf3IntfRxTxDisdStatsEntry 5 }
ospf3IntfTxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets transmitted on this Ospf3
interface."
::= { ospf3IntfRxTxDisdStatsEntry 6 }
ospf3IntfDisdHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets discaded in this Ospf3
interface."
::= { ospf3IntfRxTxDisdStatsEntry 7 }
ospf3IntfRxDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets transmitted
for this Ospf3 interface."
::= { ospf3IntfRxTxDisdStatsEntry 8 }
ospf3IntfTxDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets transmitted
for this Ospf3 interface."
::= { ospf3IntfRxTxDisdStatsEntry 9 }
ospf3IntfDisdDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets discarded
for this Ospf3 interface."
::= { ospf3IntfRxTxDisdStatsEntry 10 }
ospf3IntfRxlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Request packets received for
this Ospf3 interface."
::= { ospf3IntfRxTxDisdStatsEntry 11 }
ospf3IntfTxlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Request packets transmitted for
this Ospf3 interface."
::= { ospf3IntfRxTxDisdStatsEntry 12 }
ospf3IntfDisdlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Request packets discarded for
this Ospf3 interface."
::= { ospf3IntfRxTxDisdStatsEntry 13 }
ospf3IntfRxlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Acknowledgement packets received for
this Ospf3 interface."
::= { ospf3IntfRxTxDisdStatsEntry 14 }
ospf3IntfTxlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Acknowledgement packets transmitted
for this Ospf3 interface."
::= { ospf3IntfRxTxDisdStatsEntry 15 }
ospf3IntfDisdlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Acknowledgement packets discarded
for this Ospf3 interface."
::= { ospf3IntfRxTxDisdStatsEntry 16 }
ospf3IntfRxlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Update packets received for
this Ospf3 interface."
::= { ospf3IntfRxTxDisdStatsEntry 17 }
ospf3IntfTxlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Update packets transmitted for
this Ospf3 interface."
::= { ospf3IntfRxTxDisdStatsEntry 18 }
ospf3IntfDisdlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Update packets discarded for
this Ospf3 interface."
::= { ospf3IntfRxTxDisdStatsEntry 19 }
ospf3IntfNbrChangeStats OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3IntfNbrChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Ospf3 Interface Neighbour change Statistics."
::= { ospf3Interface 2 }
ospf3IntfNbrChangeStatsEntry OBJECT-TYPE
SYNTAX Ospf3IntfNbrChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ospf3 interface Neighbour Change statistics."
INDEX { ospf3IntfNbrIndex }
::= { ospf3IntfNbrChangeStats 1 }
Ospf3IntfNbrChangeStatsEntry ::= SEQUENCE {
ospf3IntfNbrIndex Integer32,
ospf3IntfNbrDown Counter32,
ospf3IntfNbrAttempt Counter32,
ospf3IntfNbrInit Counter32,
ospf3IntfNbrN2way Counter32,
ospf3IntfNbrExStart Counter32,
ospf3IntfNbrExchange Counter32,
ospf3IntfNbrLoading Counter32,
ospf3IntfNbrFull Counter32,
ospf3IntfNbrAllEvents Counter32
}
ospf3IntfNbrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Ospf3 Interface for which these statistics apply."
::= { ospf3IntfNbrChangeStatsEntry 1 }
ospf3IntfNbrDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on this interface
have changed into DOWN state."
::= { ospf3IntfNbrChangeStatsEntry 2 }
ospf3IntfNbrAttempt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on this interface
have changed into ATTEMPT state."
::= { ospf3IntfNbrChangeStatsEntry 3 }
ospf3IntfNbrInit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on this interface
have changed into INIT state."
::= { ospf3IntfNbrChangeStatsEntry 4 }
ospf3IntfNbrN2way OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on this interface
have changed into 2WAY state."
::= { ospf3IntfNbrChangeStatsEntry 5 }
ospf3IntfNbrExStart OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on this interface
have changed into EXSTART state."
::= { ospf3IntfNbrChangeStatsEntry 6 }
ospf3IntfNbrExchange OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on this interface
have changed into EXCHANGE state."
::= { ospf3IntfNbrChangeStatsEntry 7 }
ospf3IntfNbrLoading OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on this interface
have changed into LOADING state."
::= { ospf3IntfNbrChangeStatsEntry 8 }
ospf3IntfNbrFull OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on this interface
have changed into FULL state."
::= { ospf3IntfNbrChangeStatsEntry 9 }
ospf3IntfNbrAllEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on this interface
have changed state or an error had occured."
::= { ospf3IntfNbrChangeStatsEntry 10 }
ospf3IntfChangeStats OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3IntfChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Ospf3 Interface change Statistics."
::= { ospf3Interface 3 }
ospf3IntfChangeStatsEntry OBJECT-TYPE
SYNTAX Ospf3IntfChangeStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ospf3 interface Change statistics."
INDEX { ospf3IntfIndex }
::= { ospf3IntfChangeStats 1 }
Ospf3IntfChangeStatsEntry ::= SEQUENCE {
ospf3IntfIndex Integer32,
ospf3IntfDown Counter32,
ospf3IntfLoop Counter32,
ospf3IntfWaiting Counter32,
ospf3IntfPtop Counter32,
ospf3IntfDr Counter32,
ospf3IntfBackup Counter32,
ospf3IntfDrOther Counter32,
ospf3IntfAllEvents Counter32
}
ospf3IntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Ospf3 Interface for which these statistics apply."
::= { ospf3IntfChangeStatsEntry 1 }
ospf3IntfDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the interface was down."
::= { ospf3IntfChangeStatsEntry 2 }
ospf3IntfLoop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times this interface changed State into the LOOP State."
::= { ospf3IntfChangeStatsEntry 3 }
ospf3IntfWaiting OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times this interface changed State into the Waiting State."
::= { ospf3IntfChangeStatsEntry 4 }
ospf3IntfPtop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times this interface changed State into the PTOP State."
::= { ospf3IntfChangeStatsEntry 5 }
ospf3IntfDr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times this interface changed State into the DR State."
::= { ospf3IntfChangeStatsEntry 6 }
ospf3IntfBackup OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times this interface changed State into the Backup State."
::= { ospf3IntfChangeStatsEntry 7 }
ospf3IntfDrOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times this interface changed State into the DrOther State."
::= { ospf3IntfChangeStatsEntry 8 }
ospf3IntfAllEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times this interface changed State."
::= { ospf3IntfChangeStatsEntry 9 }
ospf3IntfErrorStats OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3IntfErrorStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Ospf3 Interface Error Statistics."
::= { ospf3Interface 4 }
ospf3IntfErrorStatsEntry OBJECT-TYPE
SYNTAX Ospf3IntfErrorStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Error Statistics for an Ospf3 interface."
INDEX { ospf3IntfErrIndex }
::= { ospf3IntfErrorStats 1 }
Ospf3IntfErrorStatsEntry ::= SEQUENCE {
ospf3IntfErrIndex Integer32,
ospf3IntfErrRxOnPasv Counter32,
ospf3IntfErrRxOspfOff Counter32,
ospf3IntfErrRxOnNotup Counter32,
ospf3IntfErrRxVerMismatch Counter32,
ospf3IntfErrRxZeroRTRID Counter32,
ospf3IntfErrRxSameRTRID Counter32,
ospf3IntfErrRxMismatchInstID Counter32,
ospf3IntfErrBadAreaID Counter32,
ospf3IntfErrBadDestAddr Counter32,
ospf3IntfErrBadChecksum Counter32,
ospf3IntfErrBadNeighbour Counter32,
ospf3IntfErrBadPktType Counter32,
ospf3IntfErrHelloMismatch Counter32,
ospf3IntfErrOptionsMismatch Counter32,
ospf3IntfErrDeadMismatch Counter32,
ospf3IntfErrMTUMismatch Counter32,
ospf3IntfErrHelloNoNbr Counter32
}
ospf3IntfErrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Ospf3 Intf for which these statistics apply."
::= { ospf3IntfErrorStatsEntry 1 }
ospf3IntfErrRxOnPasv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by this interface that are
received on a passive interface."
::= { ospf3IntfErrorStatsEntry 2 }
ospf3IntfErrRxOspfOff OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by this interface that are
received while OSPF was disabled."
::= { ospf3IntfErrorStatsEntry 3 }
ospf3IntfErrRxOnNotup OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by this interface that are
received while the interface was disabled."
::= { ospf3IntfErrorStatsEntry 4 }
ospf3IntfErrRxVerMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by this interface that have
an OSPF version number not equal to the one of the interface."
::= { ospf3IntfErrorStatsEntry 5 }
ospf3IntfErrRxZeroRTRID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by this interface that have
a RouterID of 0."
::= { ospf3IntfErrorStatsEntry 6 }
ospf3IntfErrRxSameRTRID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by this interface that have
the same RouterID as this Router."
::= { ospf3IntfErrorStatsEntry 7 }
ospf3IntfErrRxMismatchInstID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by this interface that have
an instance number not equal to the one of the interface."
::= { ospf3IntfErrorStatsEntry 8 }
ospf3IntfErrBadAreaID OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received by this interface that have
an area number not equal to the one of the area of the interface."
::= { ospf3IntfErrorStatsEntry 9 }
ospf3IntfErrBadDestAddr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets discarded by this interface because of
a destination address mismatch."
::= { ospf3IntfErrorStatsEntry 10 }
ospf3IntfErrBadChecksum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets discarded by this interface because of
a bad checksum."
::= { ospf3IntfErrorStatsEntry 11 }
ospf3IntfErrBadNeighbour OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets discarded by this interface because
they could not be associated with any neighbor."
::= { ospf3IntfErrorStatsEntry 12 }
ospf3IntfErrBadPktType OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets discarded by this interface because
the packet type was not recognized."
::= { ospf3IntfErrorStatsEntry 13 }
ospf3IntfErrHelloMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different hello interval
by this interface."
::= { ospf3IntfErrorStatsEntry 14 }
ospf3IntfErrOptionsMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different options
by this interface."
::= { ospf3IntfErrorStatsEntry 15 }
ospf3IntfErrDeadMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different dead interval
by this interface."
::= { ospf3IntfErrorStatsEntry 16 }
ospf3IntfErrMTUMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with a different MTU size
by this interface."
::= { ospf3IntfErrorStatsEntry 17 }
ospf3IntfErrHelloNoNbr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received from an unknown neighbor
when this interface has a Network Type of NBMA or PTOMP."
::= { ospf3IntfErrorStatsEntry 18 }
-- Ospf3 General Statistics contains the cumulative stats for all
-- areas / interfaces
ospf3CumRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Ospf3 packets received on all
of the router's interfaces."
::= { ospf3CumRxTxDisdStats 1 }
ospf3CumTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Ospf3 packets transmitted on all
of the router's interfaces."
::= { ospf3CumRxTxDisdStats 2 }
ospf3CumDisdPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Ospf3 packets discaded on all
of the router's interfaces."
::= { ospf3CumRxTxDisdStats 3 }
ospf3CumRxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets received on all
of the router's interfaces."
::= { ospf3CumRxTxDisdStats 4 }
ospf3CumTxHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets transmitted on all
of the router's interfaces."
::= { ospf3CumRxTxDisdStats 5 }
ospf3CumDisdHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Hello packets discaded on all
of the router's interfaces."
::= { ospf3CumRxTxDisdStats 6 }
ospf3CumRxDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets received on all
of the router's interfaces."
::= { ospf3CumRxTxDisdStats 7 }
ospf3CumTxDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets transmitted
on all of the router's interfaces."
::= { ospf3CumRxTxDisdStats 8 }
ospf3CumDisdDatabase OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Database Description packets discarded
on all of the router's interfaces."
::= { ospf3CumRxTxDisdStats 9 }
ospf3CumRxlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Request packets received
on all of the router's interfaces."
::= { ospf3CumRxTxDisdStats 10 }
ospf3CumTxlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Request packets transmitted
on all of the router's interfaces."
::= { ospf3CumRxTxDisdStats 11 }
ospf3CumDisdlsReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Request packets discarded
on all of the router's interfaces."
::= { ospf3CumRxTxDisdStats 12 }
ospf3CumRxlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Acknowledgement packets received
on all of the router's interfaces."
::= { ospf3CumRxTxDisdStats 13 }
ospf3CumTxlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Acknowledgement packets transmitted
on all of the router's interfaces."
::= { ospf3CumRxTxDisdStats 14 }
ospf3CumDisdlsAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Acknowledgement packets discarded
on all of the router's interfaces."
::= { ospf3CumRxTxDisdStats 15 }
ospf3CumRxlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Update packets received
on all of the router's interfaces."
::= { ospf3CumRxTxDisdStats 16 }
ospf3CumTxlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Update packets transmitted
on all of the router's interfaces."
::= { ospf3CumRxTxDisdStats 17 }
ospf3CumDisdlsUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link State Update packets discarded
on all of the router's interfaces."
::= { ospf3CumRxTxDisdStats 18 }
ospf3CumNbrDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing on the interfaces now
present on the router have changed into DOWN state."
::= { ospf3CumNbrChangeStats 1 }
ospf3CumNbrAttempt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing the on interfaces now
present on the router have changed into ATTEMPT state."
::= { ospf3CumNbrChangeStats 2 }
ospf3CumNbrInit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing the on interfaces now
present on the router have changed into INIT state."
::= { ospf3CumNbrChangeStats 3 }
ospf3CumNbrN2way OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing the on interfaces now
present on the router have changed into 2WAY state."
::= { ospf3CumNbrChangeStats 4 }
ospf3CumNbrExStart OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing the on interfaces now
present on the router have changed into EXSTART state."
::= { ospf3CumNbrChangeStats 5 }
ospf3CumNbrExchange OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing the on interfaces now
present on the router have changed into EXCHANGE state."
::= { ospf3CumNbrChangeStats 6 }
ospf3CumNbrLoading OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing the on interfaces now
present on the router have changed into LOADING state."
::= { ospf3CumNbrChangeStats 7 }
ospf3CumNbrFull OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing the on interfaces now
present on the router have changed into FULL state."
::= { ospf3CumNbrChangeStats 8 }
ospf3CumNbrAllEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times neighbors now existing the on interfaces now
present on the router have changed state."
::= { ospf3CumNbrChangeStats 9 }
ospf3CumIntfDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times, for all the interfaces on the router,
an interface was down."
::= { ospf3CumIntfChangeStats 1 }
ospf3CumIntfLoop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times , for all the interfaces on the router,
an interface changed State into the LOOP State."
::= { ospf3CumIntfChangeStats 2 }
ospf3CumIntfWaiting OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times , for all the interfaces on the router,
an interface changed State into the WAITING State."
::= { ospf3CumIntfChangeStats 3 }
ospf3CumIntfPtop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times , for all the interfaces on the router,
an interface changed State into the PTOP State."
::= { ospf3CumIntfChangeStats 4 }
ospf3CumIntfDr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times , for all the interfaces on the router,
an interface changed State into the DR State."
::= { ospf3CumIntfChangeStats 5 }
ospf3CumIntfBackup OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times , for all the interfaces on the router,
an interface changed State into the BACKUP State."
::= { ospf3CumIntfChangeStats 6 }
ospf3CumIntfDrOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times , for all the interfaces on the router,
an interface changed State into the DROTHER State."
::= { ospf3CumIntfChangeStats 7 }
ospf3CumIntfAllEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times , for all the interfaces on the router,
an interface changed it's state."
::= { ospf3CumIntfChangeStats 8 }
ospf3TmrsKckOffHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of times the Hello timer has been fired
(which triggers the send of a Hello packet) across all OPSF
areas and interfaces."
::= { ospf3TimersKickOffStats 1 }
ospf3TmrsKckOffWait OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of times the KickOffWait timer has been fired
(which triggers the send of a KickOffWait packet) across all OPSF
areas and interfaces."
::= { ospf3TimersKickOffStats 2 }
ospf3TmrsKckOffPoll OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of times the KickOffPoll timer has been fired
(which triggers the send of a KickOffPoll packet) across all OPSF
areas and interfaces."
::= { ospf3TimersKickOffStats 3 }
ospf3TmrsKckOffNbrProbe OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum total number of times the KickOffNbrProbe timer has been fired
(which triggers the send of a KickOffNbrProbe packet) across all OPSF
areas and interfaces."
::= { ospf3TimersKickOffStats 4 }
mldIfStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldIfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the interfaces on which
MLD is enabled."
::= { mldStats 1 }
mldIfStatsEntry OBJECT-TYPE
SYNTAX MldIfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry representing an interface stats on
which MLD is enabled."
INDEX { mldIfStatsIfIndex }
::= { mldIfStatsTable 1 }
MldIfStatsEntry ::= SEQUENCE {
mldIfStatsIfIndex Integer32,
rxMldIfStatsGeneralQuery Counter32,
rxMldIfStatsMASQuery Counter32,
rxMldIfStatsMASSQQuery Counter32,
rxMldIfStatsMLDv1Report Counter32,
rxMldIfStatsMLDv1Done Counter32,
rxMldIfStatsMLDv2Report Counter32,
rxMldIfStatsIncCrsv2 Counter32,
rxMldIfStatsExcCrsv2 Counter32,
rxMldIfStatsToIncFmcrsv2 Counter32,
rxMldIfStatsToExcFmcrsv2 Counter32,
rxMldIfStatsAllowSlcrsv2 Counter32,
rxMldIfStatsBlockSlcrsv2 Counter32,
txMldIfStatsGeneralQuery Counter32,
txMldIfStatsMASQuery Counter32,
txMldIfStatsMASSQQuery Counter32,
txMldIfStatsMLDv1Report Counter32,
txMldIfStatsMLDv1Done Counter32,
txMldIfStatsMLDv2Report Counter32,
txMldIfStatsIncCrsv2 Counter32,
txMldIfStatsExcCrsv2 Counter32,
txMldIfStatsToIncFmcrsv2 Counter32,
txMldIfStatsToExcFmcrsv2 Counter32,
txMldIfStatsAllowSlcrsv2 Counter32,
txMldIfStatsBlockSlcrsv2 Counter32,
errMldIfStatsGeneralQuery Counter32,
errMldIfStatsMASQuery Counter32,
errMldIfStatsMASSQQuery Counter32,
errMldIfStatsMLDv1Report Counter32,
errMldIfStatsMLDv1Done Counter32,
errMldIfStatsMLDv2Report Counter32,
errMldIfStatsIncCrsv2 Counter32,
errMldIfStatsExcCrsv2 Counter32,
errMldIfStatsToIncFmcrsv2 Counter32,
errMldIfStatsToExcFmcrsv2 Counter32,
errMldIfStatsAllowSlcrsv2 Counter32,
errMldIfStatsBlockSlcrsv2 Counter32
}
mldIfStatsIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internetwork-layer interface value of the interface
for which MLD msg stats is counted."
::= { mldIfStatsEntry 1 }
rxMldIfStatsGeneralQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Listener Queries received."
::= { mldIfStatsEntry 2 }
rxMldIfStatsMASQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Listener MAS Queries received."
::= { mldIfStatsEntry 3 }
rxMldIfStatsMASSQQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Listener MASSQ Queries received."
::= { mldIfStatsEntry 4 }
rxMldIfStatsMLDv1Report OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Listener Reports (v1) received."
::= { mldIfStatsEntry 5 }
rxMldIfStatsMLDv1Done OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Listener Dones (v1/v2) received."
::= { mldIfStatsEntry 6 }
rxMldIfStatsMLDv2Report OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Listener Reports (v2) received."
::= { mldIfStatsEntry 7 }
rxMldIfStatsIncCrsv2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD INC CRs (v2) received."
::= { mldIfStatsEntry 8 }
rxMldIfStatsExcCrsv2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD EXC CRs (v2) received."
::= { mldIfStatsEntry 9 }
rxMldIfStatsToIncFmcrsv2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD TO_INC FMCRs (v2) received."
::= { mldIfStatsEntry 10 }
rxMldIfStatsToExcFmcrsv2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD TO_EXC FMCRs (v2) received."
::= { mldIfStatsEntry 11 }
rxMldIfStatsAllowSlcrsv2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD ALLOW SLCRs (v2) received."
::= { mldIfStatsEntry 12 }
rxMldIfStatsBlockSlcrsv2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD BLOCK SLCRs (v2) received."
::= { mldIfStatsEntry 13 }
txMldIfStatsGeneralQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Listener Queries sent."
::= { mldIfStatsEntry 14 }
txMldIfStatsMASQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Listener MAS Queries sent."
::= { mldIfStatsEntry 15 }
txMldIfStatsMASSQQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Listener MASSQ Queries sent."
::= { mldIfStatsEntry 16 }
txMldIfStatsMLDv1Report OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Listener Reports (v1) sent."
::= { mldIfStatsEntry 17 }
txMldIfStatsMLDv1Done OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Listener Dones (v1/v2) sent."
::= { mldIfStatsEntry 18 }
txMldIfStatsMLDv2Report OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Listener Reports (v2) sent."
::= { mldIfStatsEntry 19 }
txMldIfStatsIncCrsv2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD INC CRs (v2) sent"
::= { mldIfStatsEntry 20 }
txMldIfStatsExcCrsv2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD EXC CRs (v2) sent"
::= { mldIfStatsEntry 21 }
txMldIfStatsToIncFmcrsv2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD TO_INC FMCRs (v2) sent"
::= { mldIfStatsEntry 22 }
txMldIfStatsToExcFmcrsv2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD TO_EXC FMCRs (v2) sent"
::= { mldIfStatsEntry 23 }
txMldIfStatsAllowSlcrsv2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD ALLOW SLCRs (v2) sent"
::= { mldIfStatsEntry 24 }
txMldIfStatsBlockSlcrsv2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD BLOCK SLCRs (v2) received."
::= { mldIfStatsEntry 25 }
errMldIfStatsGeneralQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Listener Queries errors."
::= { mldIfStatsEntry 27 }
errMldIfStatsMASQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Listener MAS Queries errors."
::= { mldIfStatsEntry 28 }
errMldIfStatsMASSQQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Listener MASSQ Queries errors."
::= { mldIfStatsEntry 29 }
errMldIfStatsMLDv1Report OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Listener Report (v1) errors."
::= { mldIfStatsEntry 30 }
errMldIfStatsMLDv1Done OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Listener Done (v1/v2) errors."
::= { mldIfStatsEntry 31 }
errMldIfStatsMLDv2Report OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Listener Report (v2) errors."
::= { mldIfStatsEntry 32}
errMldIfStatsIncCrsv2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD INC CRs (v2) errors."
::= { mldIfStatsEntry 33 }
errMldIfStatsExcCrsv2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD EXC CRs (v2) errors."
::= { mldIfStatsEntry 34 }
errMldIfStatsToIncFmcrsv2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD TO_INC FMCRs (v2) errors."
::= { mldIfStatsEntry 35 }
errMldIfStatsToExcFmcrsv2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD TO_EXC FMCRs (v2) errors."
::= { mldIfStatsEntry 36 }
errMldIfStatsAllowSlcrsv2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD ALLOW SLCRs (v2) errors."
::= { mldIfStatsEntry 37 }
errMldIfStatsBlockSlcrsv2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD BLOCK SLCRs (v2) errors."
::= { mldIfStatsEntry 38 }
mldStatBadLength OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bad length mld packet."
::= { mldStats 2 }
mldStatBadChecksum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bad checksum mld packet."
::= { mldStats 3 }
mldStatBadReceiveIf OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bad reveive if mld packet."
::= { mldStats 4 }
mldStatReceiveNonLocal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of non local received mld packet."
::= { mldStats 5 }
mldStatInvalidPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid packets."
::= { mldStats 6 }
mldStatTotalL3Ipv6SgvEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total L3 IPv6 (S, G, V) entries"
::= { mldStats 7 }
mldStatTotalMLDGroups OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MLD Groups."
::= { mldStats 8 }
mldStatClearAll OBJECT-TYPE
SYNTAX INTEGER {
other(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear all MLD stats. Returns other(1) when read."
::= { mldStats 9 }
-- Information - Run-time IP Route Table
ipInfoRouterID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Router ID information."
::= { ipInfo 1 }
ipIntfInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP interface information."
::= {ipIntfInfo 1 }
intfInfoEntry OBJECT-TYPE
SYNTAX IntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in IP interface information table."
INDEX { intfInfoIndex }
::= { ipIntfInfoTable 1 }
IntfInfoEntry ::= SEQUENCE {
intfInfoIndex Integer32,
intfInfoAddr DisplayString,
intfInfoNetMask DisplayString,
intfInfoBcastAddr DisplayString,
intfInfoVlan Integer32,
intfInfoStatus INTEGER
}
intfInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the information is related."
::= { intfInfoEntry 1}
intfInfoAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the interface."
::= { intfInfoEntry 3 }
intfInfoNetMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask of the interface."
::= { intfInfoEntry 4 }
intfInfoBcastAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The broadcast address of the interface."
::= { intfInfoEntry 5 }
intfInfoVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN number for this interface."
::= { intfInfoEntry 6 }
intfInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the interface."
::= { intfInfoEntry 7 }
ipIntfLoopbackInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IntfLoopbackInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP Loopback interface information."
::= {ipIntfLoopbackInfo 1 }
intfLoopbackInfoEntry OBJECT-TYPE
SYNTAX IntfLoopbackInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in IP Loopback interface information table."
INDEX { intfLoopbackInfoIndex }
::= { ipIntfLoopbackInfoTable 1 }
IntfLoopbackInfoEntry ::= SEQUENCE {
intfLoopbackInfoIndex Integer32,
intfLoopbackInfoAddr DisplayString,
intfLoopbackInfoNetMask DisplayString,
intfLoopbackInfoBcastAddr DisplayString,
intfLoopbackInfoStatus INTEGER
}
intfLoopbackInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Loopback interface number for which the information is related."
::= { intfLoopbackInfoEntry 1}
intfLoopbackInfoAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the interface."
::= { intfLoopbackInfoEntry 3 }
intfLoopbackInfoNetMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask of the interface."
::= { intfLoopbackInfoEntry 4 }
intfLoopbackInfoBcastAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The broadcast address of the interface."
::= { intfLoopbackInfoEntry 5 }
intfLoopbackInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the interface."
::= { intfLoopbackInfoEntry 7 }
ipMgmtRouteInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpMgmtRouteInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of run-time IP routes."
::= { ipRoutingInfo 3 }
ipMgmtRouteInfoEntry OBJECT-TYPE
SYNTAX IpMgmtRouteInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the run-time IP route table"
INDEX { ipMgmtRouteInfoIndx }
::= { ipMgmtRouteInfoTable 1 }
IpMgmtRouteInfoEntry ::= SEQUENCE {
ipMgmtRouteInfoIndx Integer32,
ipMgmtRouteInfoDestIp IpAddress,
ipMgmtRouteInfoMask IpAddress,
ipMgmtRouteInfoGateway IpAddress,
ipMgmtRouteInfoTag INTEGER,
ipMgmtRouteInfoType INTEGER,
ipMgmtRouteInfoInterface Integer32,
ipMgmtRouteInfoGateway1 IpAddress,
ipMgmtRouteInfoGateway2 IpAddress,
ipMgmtRouteInfoMetric Integer32
}
ipMgmtRouteInfoIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of this route table."
::= { ipMgmtRouteInfoEntry 1 }
ipMgmtRouteInfoDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { ipMgmtRouteInfoEntry 2 }
ipMgmtRouteInfoMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP mask of this route."
::= { ipMgmtRouteInfoEntry 3 }
ipMgmtRouteInfoGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next-hop router address for this route."
::= { ipMgmtRouteInfoEntry 4 }
ipMgmtRouteInfoTag OBJECT-TYPE
SYNTAX INTEGER {
fixed(1),
static(2),
addr(3),
rip(4),
broadcast(5),
martian(6),
multicast(7),
vip(8),
bgp(9),
ospf(10),
none(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tag-type for this route."
::= { ipMgmtRouteInfoEntry 5 }
ipMgmtRouteInfoType OBJECT-TYPE
SYNTAX INTEGER {
indirect(1),
direct(2),
local(3),
broadcast(4),
martian(5),
multicast(6),
other(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the route."
::= { ipMgmtRouteInfoEntry 6 }
ipMgmtRouteInfoInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the destination address is applicable."
::= { ipMgmtRouteInfoEntry 7 }
ipMgmtRouteInfoGateway1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next-hop router address for this route."
::= { ipMgmtRouteInfoEntry 8 }
ipMgmtRouteInfoGateway2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next-hop router address for this route."
::= { ipMgmtRouteInfoEntry 9 }
ipMgmtRouteInfoMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Metric for this route."
::= { ipMgmtRouteInfoEntry 10 }
ipDataRouteInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpDataRouteInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of run-time IP routes."
::= { ipRoutingInfo 1 }
ipDataRouteInfoEntry OBJECT-TYPE
SYNTAX IpDataRouteInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the run-time IP route table"
INDEX { ipDataRouteInfoIndx }
::= { ipDataRouteInfoTable 1 }
IpDataRouteInfoEntry ::= SEQUENCE {
ipDataRouteInfoIndx Integer32,
ipDataRouteInfoDestIp IpAddress,
ipDataRouteInfoMask IpAddress,
ipDataRouteInfoGateway IpAddress,
ipDataRouteInfoTag INTEGER,
ipDataRouteInfoType INTEGER,
ipDataRouteInfoInterface Integer32,
ipDataRouteInfoGateway1 IpAddress,
ipDataRouteInfoGateway2 IpAddress,
ipDataRouteInfoMetric Integer32
}
ipDataRouteInfoIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of this route table."
::= { ipDataRouteInfoEntry 1 }
ipDataRouteInfoDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { ipDataRouteInfoEntry 2 }
ipDataRouteInfoMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP mask of this route."
::= { ipDataRouteInfoEntry 3 }
ipDataRouteInfoGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next-hop router address for this route."
::= { ipDataRouteInfoEntry 4 }
ipDataRouteInfoTag OBJECT-TYPE
SYNTAX INTEGER {
fixed(1),
static(2),
addr(3),
rip(4),
broadcast(5),
martian(6),
multicast(7),
vip(8),
bgp(9),
ospf(10),
none(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tag-type for this route."
::= { ipDataRouteInfoEntry 5 }
ipDataRouteInfoType OBJECT-TYPE
SYNTAX INTEGER {
indirect(1),
direct(2),
local(3),
broadcast(4),
martian(5),
multicast(6),
other(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the route."
::= { ipDataRouteInfoEntry 6 }
ipDataRouteInfoInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the destination address is applicable.
Loopback interfaces are numbered starting with maximum allowed
IP interfaces +1."
::= { ipDataRouteInfoEntry 7 }
ipDataRouteInfoGateway1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next-hop router address for this route."
::= { ipDataRouteInfoEntry 8 }
ipDataRouteInfoGateway2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next-hop router address for this route."
::= { ipDataRouteInfoEntry 9 }
ipDataRouteInfoMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Metric for this route."
::= { ipDataRouteInfoEntry 10 }
routeTableClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the route table."
::= { ipRoutingInfo 2 }
ipRouteEcmpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpRouteEcmpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of run-time IP routes."
::= { ipEcmpRoutingInfo 1 }
ipRouteEcmpInfoEntry OBJECT-TYPE
SYNTAX IpRouteEcmpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the run-time IP route table"
INDEX { ipRouteEcmpInfoDestIndx, ipRouteEcmpInfoGwIndx }
::= { ipRouteEcmpInfoTable 1 }
IpRouteEcmpInfoEntry ::= SEQUENCE {
ipRouteEcmpInfoDestIndx Integer32,
ipRouteEcmpInfoGwIndx Integer32,
ipRouteEcmpInfoDest IpAddress,
ipRouteEcmpInfoMask IpAddress,
ipRouteEcmpInfoGateway IpAddress,
ipRouteEcmpInfoInterface Integer32,
ipRouteEcmpInfoGwStatus INTEGER
}
ipRouteEcmpInfoDestIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of unique destinations IP."
::= { ipRouteEcmpInfoEntry 1 }
ipRouteEcmpInfoGwIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the gateway per destination."
::= { ipRouteEcmpInfoEntry 2 }
ipRouteEcmpInfoDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP of this route."
::= { ipRouteEcmpInfoEntry 3 }
ipRouteEcmpInfoMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP mask of this route."
::= { ipRouteEcmpInfoEntry 4 }
ipRouteEcmpInfoGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next-hop router address for this route."
::= { ipRouteEcmpInfoEntry 5 }
ipRouteEcmpInfoInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface for the next-hop."
::= { ipRouteEcmpInfoEntry 6 }
ipRouteEcmpInfoGwStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Up/Down status of the gateway"
::= { ipRouteEcmpInfoEntry 7 }
ipEcmpHashSIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SIP Address."
::= { ipEcmpHash 1 }
ipEcmpHashDIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DIP Address (enter 0 for SIP only)."
::= { ipEcmpHash 2 }
ipEcmpHashNumberPaths OBJECT-TYPE
SYNTAX INTEGER (2..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of ECMP paths."
::= { ipEcmpHash 3 }
ipEcmpHashRouteNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the hash algorithm.
For this to work the values for ipEcmpHashSIPAddr,
ipEcmpHashDIPAddr, ipEcmpHashNumberPaths must be set.
If the result is 0 ipEcmpHashNumberPaths is not correctly set."
::= { ipEcmpHash 4 }
mldInfoGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldInfoGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the IPv6 multicast
groups for which there are members on a particular interface."
::= { mldInfo 1 }
mldInfoGroupEntry OBJECT-TYPE
SYNTAX MldInfoGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the mldInfoGroupsTable"
INDEX { mldInfoGroupId }
::= { mldInfoGroupsTable 1 }
MldInfoGroupEntry ::= SEQUENCE {
mldInfoGroupIfIndex Integer32,
mldInfoGroupAddress InetAddressIPv6,
mldInfoGroupPortNumber Integer32,
mldInfoGroupVlanID Integer32,
mldInfoGroupLastReporter InetAddressIPv6,
mldInfoGroupSource InetAddressIPv6,
mldInfoGroupFilterType DisplayString,
mldInfoGroupExpiryTime DisplayString,
mldInfoGroupVersion Integer32,
mldInfoGroupFwd Integer32,
mldInfoGroupId Integer32
}
mldInfoGroupIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internetwork-layer interface for which this entry
contains information for an IPv6 multicast group address."
::= { mldInfoGroupEntry 1 }
mldInfoGroupAddress OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 multicast group address for which this entry
contains information. Its address MUST be of format:
2x:2x:2x:2x:2x:2x:2x:2x"
::= { mldInfoGroupEntry 2 }
mldInfoGroupPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port number for which this entry
contains information for an IPv6 multicast group address."
::= { mldInfoGroupEntry 3 }
mldInfoGroupVlanID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The VLAN ID for which this entry
contains information for an IPv6 multicast group address."
::= { mldInfoGroupEntry 4 }
mldInfoGroupLastReporter OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 address of the source of the last membership
report received for this IPv6 Multicast group address on
this interface. If no membership report has been
received, this object has the value 00:0:00:00:00:00:00:00.
Its address MUST be of format:2x:2x:2x:2x:2x:2x:2x:2x"
::= { mldInfoGroupEntry 5 }
mldInfoGroupSource OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONLY for MLDv2. The IPv6 address for which the this entry's
filter is applied. Its address MUST be of format:
2x:2x:2x:2x:2x:2x:2x:2x"
::= { mldInfoGroupEntry 6 }
mldInfoGroupFilterType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ONLY for MLDv2. The filter type for the specified source."
::= { mldInfoGroupEntry 7 }
mldInfoGroupExpiryTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum amount of time remaining before this entry
will be aged out. A value of 0 indicates that the entry
is only present because mldCacheSelf is true and that if
the router left the group, this entry would be aged out
immediately. Note that some implementations may process
Membership Reports from the local system in the same way
as reports from other hosts, so a value of 0 is not
required."
::= { mldInfoGroupEntry 8 }
mldInfoGroupVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version of this MLD entry."
::= { mldInfoGroupEntry 9 }
mldInfoGroupFwd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies if forwarding is enabled for this entry."
::= { mldInfoGroupEntry 10 }
mldInfoGroupId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MLD group index."
::= { mldInfoGroupEntry 11 }
mldInfoMRoutersTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldInfoMRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table listing the IPv6 multicast routers on an interface."
::= { mldInfo 2 }
mldInfoMRouterEntry OBJECT-TYPE
SYNTAX MldInfoMRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the mldInfoMRoutersTable"
INDEX { mldInfoMRouterId }
::= { mldInfoMRoutersTable 1 }
MldInfoMRouterEntry ::= SEQUENCE {
mldInfoMRouterIfIndex Integer32,
mldInfoMRouterSrcIp InetAddressIPv6,
mldInfoMRouterPortNumber Integer32,
mldInfoMRouterVlan Integer32,
mldInfoMRouterQrv Integer32,
mldInfoMRouterQqic Integer32,
mldInfoMRouterMaxRespDelay Integer32,
mldInfoMRouterVersion Integer32,
mldInfoMRouterExpiryTime DisplayString,
mldInfoMRouterId Integer32
}
mldInfoMRouterIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface on which the multicast router is learnt."
::= { mldInfoMRouterEntry 1 }
mldInfoMRouterSrcIp OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast router's ip."
::= { mldInfoMRouterEntry 2 }
mldInfoMRouterPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port on which the multicast router is learnt."
::= { mldInfoMRouterEntry 3 }
mldInfoMRouterVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan in which the multicast router is learnt."
::= { mldInfoMRouterEntry 4 }
mldInfoMRouterQrv OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This multicast router's Maximum Response Delay"
::= { mldInfoMRouterEntry 5 }
mldInfoMRouterQqic OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONLY for MLDv2. This multicast router's QQIC"
::= { mldInfoMRouterEntry 6 }
mldInfoMRouterMaxRespDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This multicast router's Maximum Response Delay."
::= { mldInfoMRouterEntry 7 }
mldInfoMRouterVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This multicast router's MLD version."
::= { mldInfoMRouterEntry 8 }
mldInfoMRouterExpiryTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This multicast router's expiry time."
::= { mldInfoMRouterEntry 9 }
mldInfoMRouterId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This multicast router's index."
::= { mldInfoMRouterEntry 10 }
mldClearTables OBJECT-TYPE
SYNTAX INTEGER {
none(0),
clearGroups(1),
clearMrouters(2),
clearAll(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the MLD tables. When setting clearGroups(1), the dynamic
groups are removed, when setting clearMrouters(2), the mrouter tables
are removed and when setting clearAll(3), both the dynamic groups
and the mrouter tables are removed.
When read, none(0) is always returned."
::= { mldInfo 3 }
mldInfoInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldInfoInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the informatio of interfaces on which
MLD is enabled."
::= { mldInfo 4 }
mldInfoInterfaceEntry OBJECT-TYPE
SYNTAX MldInfoInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing the information of an
interface on which MLD is enabled."
INDEX { mldInfoInterfaceIfIndex }
::= { mldInfoInterfaceTable 1 }
MldInfoInterfaceEntry ::= SEQUENCE {
mldInfoInterfaceIfIndex Integer32,
mldInfoInterfaceState INTEGER,
mldInfoInterfaceVersion INTEGER,
mldInfoInterfaceQuerierStatus INTEGER,
mldInfoInterfaceQuerier InetAddressIPv6,
mldInfoInterfaceQuerierExpiryTime DisplayString,
mldInfoInterfaceQuerierPort Integer32,
mldInfoInterfaceGroups INTEGER
}
mldInfoInterfaceIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internetwork-layer interface value of the interface
for which MLD is enabled."
::= { mldInfoInterfaceEntry 1 }
mldInfoInterfaceState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internetwork-layer interface value of the interface
for which MLD is enabled."
::= { mldInfoInterfaceEntry 2 }
mldInfoInterfaceVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of MLD which is running on this interface.
This object is a place holder to allow for new versions
of MLD to be introduced. Version 1 of MLD is defined
in RFC 2710."
DEFVAL { 1 }
::= { mldInfoInterfaceEntry 3 }
mldInfoInterfaceQuerierStatus OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies if the switch is Querier or not"
::= { mldInfoInterfaceEntry 4 }
mldInfoInterfaceQuerier OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the MLD Querier on the IPv6 subnet to
which this interface is attached.
Its address MUST be of format:2x:2x:2x:2x:2x:2x:2x:2x"
::= { mldInfoInterfaceEntry 5 }
mldInfoInterfaceQuerierExpiryTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before the Other Querier Present
Timer expires. If the local system is the querier,
the value of this object is zero."
::= { mldInfoInterfaceEntry 6 }
mldInfoInterfaceQuerierPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port on which the Querier is learnt.
If the local system is the querier,
the value of this object is zero."
::= { mldInfoInterfaceEntry 7 }
mldInfoInterfaceGroups OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of entries for this interface in the
Cache Table."
::= { mldInfoInterfaceEntry 8 }
-- Run Time ARP Table
arpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgArpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of ARP entries."
::= { arpInfo 1 }
arpInfoEntry OBJECT-TYPE
SYNTAX AgArpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the ARP table"
INDEX { arpInfoDestIp }
::= { arpInfoTable 1 }
AgArpInfoEntry ::= SEQUENCE {
arpInfoDestIp IpAddress,
arpInfoMacAddr PhysAddress,
arpInfoVLAN Integer32,
arpInfoSrcPort PortNumber,
arpInfoFlag INTEGER
}
arpInfoDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of the ARP entry."
::= { arpInfoEntry 1 }
arpInfoMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address for the ARP entry."
::= { arpInfoEntry 2 }
arpInfoVLAN OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier for the ARP entry."
::= { arpInfoEntry 3 }
arpInfoSrcPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number on which this entry's equivalence is effective."
::= { arpInfoEntry 4 }
arpInfoFlag OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
unresolved(2),
permanent(3),
indirect(4),
layer4(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flag associated with this ARP entry."
::= { arpInfoEntry 6 }
arpCacheClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the ARP cache."
::= { arpInfo 2 }
-- VRRP Information
vrrpInfoVirtRtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpInfoVirtRtrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VRRP virtual router run-time information."
::= { vrrpInfo 1 }
vrrpInfoVirtGroupState OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VRRP group state."
::= { vrrpInfo 2 }
vrrpInfoVirtGroupPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VRRP group priority."
::= { vrrpInfo 3 }
vrrpInfoVirtRtrTableEntry OBJECT-TYPE
SYNTAX VrrpInfoVirtRtrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The run-time information about a VRRP virtual router."
INDEX { vrrpInfoVirtRtrIndex }
::= { vrrpInfoVirtRtrTable 1 }
VrrpInfoVirtRtrTableEntry ::= SEQUENCE {
vrrpInfoVirtRtrIndex Integer32,
vrrpInfoVirtRtrState INTEGER,
vrrpInfoVirtRtrOwnership INTEGER,
vrrpInfoVirtRtrConfig INTEGER,
vrrpInfoVirtRtrID INTEGER,
vrrpInfoVirtRtrAddr IpAddress,
vrrpInfoVirtRtrIfIndex Integer32,
vrrpInfoVirtRtrPriority INTEGER
}
vrrpInfoVirtRtrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router index."
::= { vrrpInfoVirtRtrTableEntry 1 }
vrrpInfoVirtRtrState OBJECT-TYPE
SYNTAX INTEGER {
init(1),
master(2),
backup(3),
holdoff(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router state."
::= { vrrpInfoVirtRtrTableEntry 2 }
vrrpInfoVirtRtrOwnership OBJECT-TYPE
SYNTAX INTEGER {
owner(1),
renter(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router ownership status."
::= { vrrpInfoVirtRtrTableEntry 3 }
vrrpInfoVirtRtrConfig OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the VRRP virtual router."
::= { vrrpInfoVirtRtrTableEntry 4 }
vrrpInfoVirtRtrID OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router identifier."
::= { vrrpInfoVirtRtrTableEntry 5 }
vrrpInfoVirtRtrAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VRRP virtual router IP address."
::= { vrrpInfoVirtRtrTableEntry 6 }
vrrpInfoVirtRtrIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IfIndex that the VRRP virtual router is representing."
::= { vrrpInfoVirtRtrTableEntry 7 }
vrrpInfoVirtRtrPriority OBJECT-TYPE
SYNTAX INTEGER (1..254)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority value to be used by the specified VRRP virtual routers."
::= { vrrpInfoVirtRtrTableEntry 8 }
-- Ospf Information
ospfGeneralInfo OBJECT IDENTIFIER ::= { ospfinfo 1 }
ospfStartTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when ospf has been started."
::= { ospfGeneralInfo 1 }
ospfProcessUptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since ospf has been started."
::= { ospfGeneralInfo 2 }
ospfLsTypesSupported OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Link State Types that are supported."
::= { ospfGeneralInfo 3 }
ospfIntfCountForRouter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of interfaces for this router."
::= { ospfGeneralInfo 4 }
ospfVlinkCountForRouter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of virtual links for this router."
::= { ospfGeneralInfo 5 }
ospfTotalNeighbours OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of OSPF neighbours."
::= { ospfGeneralInfo 6 }
ospfNbrInInitState OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of neighbours in the initial state of exchange."
::= { ospfGeneralInfo 7 }
ospfNbrInExchState OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of neighbours in the exchange state."
::= { ospfGeneralInfo 8 }
ospfNbrInFullState OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of neighbours in the Full state of exchange."
::= { ospfGeneralInfo 9 }
ospfTotalAreas OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of areas."
::= { ospfGeneralInfo 10 }
ospfTotalTransitAreas OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of Transit areas."
::= { ospfGeneralInfo 11 }
ospfTotalNssaAreas OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of NSSA areas."
::= { ospfGeneralInfo 12 }
ospfTotalStubAreas OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of STUB areas."
::= { ospfGeneralInfo 13 }
ospfAreaInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfAreaInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Area information."
::= { ospfinfo 2 }
ospfAreaInfoEntry OBJECT-TYPE
SYNTAX OspfAreaInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPF area."
INDEX { ospfAreaInfoIndex }
::= { ospfAreaInfoTable 1 }
OspfAreaInfoEntry ::= SEQUENCE {
ospfAreaInfoIndex Integer32,
ospfAreaInfoId IpAddress,
ospfTotalNumberOfInterfaces Integer32,
ospfNumberOfInterfacesUp Integer32,
ospfNumberOfLsdbEntries Integer32,
ospfAreaInfoAuthType INTEGER,
ospfAreaInfoLsTypesAccepted DisplayString,
ospfAreaInfoSPF Integer32,
ospfAreaInfoAreaBorderRouter Integer32,
ospfAreaInfoASBoundaryRouter Integer32,
ospfAreaInfoTotalNeighbours Integer32,
ospfAreaInfoNeighborsINITstate Integer32,
ospfAreaInfoNeighborsEXCHstate Integer32,
ospfAreaInfoNeighborsFULLstate Integer32
}
ospfAreaInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF area number for which the OSPF info table is related."
::= { ospfAreaInfoEntry 1}
ospfAreaInfoId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the OSPF area."
::= { ospfAreaInfoEntry 2 }
ospfTotalNumberOfInterfaces OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of interfaces for this OSPF area."
::= { ospfAreaInfoEntry 3 }
ospfNumberOfInterfacesUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of interfaces UP in area."
::= { ospfAreaInfoEntry 4 }
ospfNumberOfLsdbEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Link State Database entries for this OSPF area."
::= { ospfAreaInfoEntry 5 }
ospfAreaInfoAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password(2),
md5(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Area authentication."
::= { ospfAreaInfoEntry 6 }
ospfAreaInfoLsTypesAccepted OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LS types accepted by this area."
::= { ospfAreaInfoEntry 7 }
ospfAreaInfoSPF OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times SPF algorithm has been executed."
::= { ospfAreaInfoEntry 8 }
ospfAreaInfoAreaBorderRouter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of ABR local to this area."
::= { ospfAreaInfoEntry 9 }
ospfAreaInfoASBoundaryRouter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of ASBR local to this area."
::= { ospfAreaInfoEntry 10 }
ospfAreaInfoTotalNeighbours OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of OSPF neighbors."
::= { ospfAreaInfoEntry 11 }
ospfAreaInfoNeighborsINITstate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total neighbors in INIT state."
::= { ospfAreaInfoEntry 12 }
ospfAreaInfoNeighborsEXCHstate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total neighbors in EXCH state."
::= { ospfAreaInfoEntry 13 }
ospfAreaInfoNeighborsFULLstate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total neighbors in FULL state."
::= { ospfAreaInfoEntry 14 }
ospfIntfInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfIntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Interface information."
::= { ospfinfo 3 }
ospfIntfInfoEntry OBJECT-TYPE
SYNTAX OspfIntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPF interface."
INDEX { ospfIfInfoIndex }
::= { ospfIntfInfoTable 1 }
OspfIntfInfoEntry ::= SEQUENCE {
ospfIfInfoIndex Integer32,
ospfIfInfoIpAddress IpAddress,
ospfIfInfoArea INTEGER,
ospfIfInfoAdminStatus INTEGER,
ospfIfInfoPassive INTEGER,
ospfIfInfoPtop INTEGER,
ospfIfInfoRouterIP IpAddress,
ospfIfInfoState INTEGER,
ospfIfInfoPriority INTEGER,
ospfIfInfoDesignatedRouterIP IpAddress,
ospfIfInfoDesignatedRouterIpAddress IpAddress,
ospfIfInfoBackupDesignatedRouterIP IpAddress,
ospfIfInfoBackupDesignatedRouterIpAddress IpAddress,
ospfIfInfoHello INTEGER,
ospfIfInfoHelloMS INTEGER,
ospfIfInfoDead INTEGER,
ospfIfInfoDeadMS INTEGER,
ospfIfInfoWaitInterval Integer32,
ospfIfInfoWaitIntervalMS INTEGER,
ospfIfInfoRetransmit INTEGER,
ospfIfInfoTransitDelay INTEGER,
ospfIfInfoTotalNeighbours Integer32,
ospfIfInfoEvents Integer32,
ospfIfInfoAuthType INTEGER
}
ospfIfInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF interface number for which the OSPF info table is related."
::= { ospfIntfInfoEntry 1}
ospfIfInfoIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the OSPF interface."
::= { ospfIntfInfoEntry 2 }
ospfIfInfoArea OBJECT-TYPE
SYNTAX INTEGER (0..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the area that the interface belongs."
::= { ospfIntfInfoEntry 3 }
ospfIfInfoAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Admin Status of the interface:
down(0), up(1)."
::= { ospfIntfInfoEntry 4 }
ospfIfInfoPassive OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Passive status of the interface:
disabled(0), enabled(1)."
::= { ospfIntfInfoEntry 5 }
ospfIfInfoPtop OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Point-to-point status of the interface:
disabled(0), enabled(1)."
::= { ospfIntfInfoEntry 24 }
ospfIfInfoRouterIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The router ID of the switch."
::= { ospfIntfInfoEntry 6 }
ospfIfInfoState OBJECT-TYPE
SYNTAX INTEGER {
down(0),
loopback(1),
waiting(2),
ptop(3),
dr(4),
backupdr(5),
drother(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the interface:
Down(0), Loopback(1),
Waiting(2), P to P(3),
DR(4), BackuDR(5),
DR Other(6)."
::= { ospfIntfInfoEntry 7 }
ospfIfInfoPriority OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface router priority"
::= { ospfIntfInfoEntry 8 }
ospfIfInfoDesignatedRouterIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Designated Router IP (IP Address) for this OSPF interface."
::= { ospfIntfInfoEntry 9 }
ospfIfInfoDesignatedRouterIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Designated Router IP Address for this OSPF interface."
::= { ospfIntfInfoEntry 10 }
ospfIfInfoBackupDesignatedRouterIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Backup Designated Router IP for this OSPF
interface."
::= { ospfIntfInfoEntry 11 }
ospfIfInfoBackupDesignatedRouterIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Backup Designated Router Ip Address for this OSPF
interface."
::= { ospfIntfInfoEntry 12 }
ospfIfInfoHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hello timer for this OSPF interface."
::= { ospfIntfInfoEntry 13 }
ospfIfInfoHelloMS OBJECT-TYPE
SYNTAX INTEGER {
seconds(0),
milliseconds(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Units of time measurement for Hello interval
seconds(0),
milliseconds(1)"
::= { ospfIntfInfoEntry 14 }
ospfIfInfoDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The dead timer for this OSPF interface."
::= { ospfIntfInfoEntry 15 }
ospfIfInfoDeadMS OBJECT-TYPE
SYNTAX INTEGER {
seconds(0),
milliseconds(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Units of time measurement for Dead interval
seconds(0),
milliseconds(1)"
::= { ospfIntfInfoEntry 16 }
ospfIfInfoWaitInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Wait interval for this OSPF interface."
::= { ospfIntfInfoEntry 17 }
ospfIfInfoWaitIntervalMS OBJECT-TYPE
SYNTAX INTEGER {
seconds(0),
milliseconds(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Units of time measurement for Wait interval
seconds(0),
milliseconds(1)"
::= { ospfIntfInfoEntry 18 }
ospfIfInfoRetransmit OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The retransmit interval for this OSPF interface."
::= { ospfIntfInfoEntry 19 }
ospfIfInfoTransitDelay OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transit delay for this OSPF interface."
::= { ospfIntfInfoEntry 20 }
ospfIfInfoTotalNeighbours OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of neighbours for this OSPF interface."
::= { ospfIntfInfoEntry 21 }
ospfIfInfoEvents OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of events for this OSPF interface."
::= { ospfIntfInfoEntry 22 }
ospfIfInfoAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password(2),
md5(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of authentication being used:
none(1) - no authentication,
password(2) - use password,
md5(3) - use MD5 authentication."
::= { ospfIntfInfoEntry 23 }
-- OSPF Interface/Virtual Interface Table
ospfVirtIntfInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfVirtIntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF virtual interfaces information."
::= { ospfinfo 4 }
ospfVirtIntfInfoEntry OBJECT-TYPE
SYNTAX OspfVirtIntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an OSPF virtual interface."
INDEX { ospfVirtIntfInfoIndex }
::= { ospfVirtIntfInfoTable 1 }
OspfVirtIntfInfoEntry ::= SEQUENCE {
ospfVirtIntfInfoIndex Integer32,
ospfVirtIntfInfoIpAddr IpAddress,
ospfVirtIntfInfoArea INTEGER,
ospfVirtIntfInfoRouterId IpAddress,
ospfVirtIntfInfoState INTEGER,
ospfVirtIntfInfoCost INTEGER,
ospfVirtIntfInfoTrans INTEGER,
ospfVirtIntfInfoHello INTEGER,
ospfVirtIntfInfoHelloMS INTEGER,
ospfVirtIntfInfoDead INTEGER,
ospfVirtIntfInfoDeadMS INTEGER,
ospfVirtIntfInfoWait INTEGER,
ospfVirtIntfInfoWaitMS INTEGER,
ospfVirtIntfInfoRetra INTEGER,
ospfVirtIntfInfoAuth DisplayString,
ospfVirtIntfInfoEvents INTEGER,
ospfVirtIntfInfoNbr IpAddress,
ospfVirtIntfInfoNbrState INTEGER,
ospfVirtIntfInfoAreaId IpAddress
}
ospfVirtIntfInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Virtual Interface number for which this table is
related."
::= { ospfVirtIntfInfoEntry 1 }
ospfVirtIntfInfoIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of this virtual interface."
::= { ospfVirtIntfInfoEntry 2 }
ospfVirtIntfInfoArea OBJECT-TYPE
SYNTAX INTEGER (0..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the OSPF area to which this virtual interface
belongs."
::= { ospfVirtIntfInfoEntry 3 }
ospfVirtIntfInfoRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Router ID."
::= { ospfVirtIntfInfoEntry 4 }
ospfVirtIntfInfoState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State
disabled(0),
enabled(1)"
::= { ospfVirtIntfInfoEntry 5 }
ospfVirtIntfInfoCost OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the virtual interface."
::= { ospfVirtIntfInfoEntry 6 }
ospfVirtIntfInfoTrans OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transit delay for the virtual interface."
::= { ospfVirtIntfInfoEntry 7 }
ospfVirtIntfInfoHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hello interval."
::= { ospfVirtIntfInfoEntry 8 }
ospfVirtIntfInfoHelloMS OBJECT-TYPE
SYNTAX INTEGER {
seconds(0),
milliseconds(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Units of time measurement for Hello interval
seconds(0),
milliseconds(1)"
::= { ospfVirtIntfInfoEntry 9 }
ospfVirtIntfInfoDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dead interval."
::= { ospfVirtIntfInfoEntry 10 }
ospfVirtIntfInfoDeadMS OBJECT-TYPE
SYNTAX INTEGER {
seconds(0),
milliseconds(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Units of time measurement for Dead interval
seconds(0),
milliseconds(1)"
::= { ospfVirtIntfInfoEntry 11 }
ospfVirtIntfInfoWait OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Wait interval."
::= { ospfVirtIntfInfoEntry 12 }
ospfVirtIntfInfoWaitMS OBJECT-TYPE
SYNTAX INTEGER {
seconds(0),
milliseconds(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Units of time measurement for Wait interval
seconds(0),
milliseconds(1)"
::= { ospfVirtIntfInfoEntry 13 }
ospfVirtIntfInfoRetra OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Retransmit interval."
::= { ospfVirtIntfInfoEntry 14 }
ospfVirtIntfInfoAuth OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication."
::= { ospfVirtIntfInfoEntry 15 }
ospfVirtIntfInfoEvents OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Events."
::= { ospfVirtIntfInfoEntry 16 }
ospfVirtIntfInfoNbr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the OSPF neighbor for this virtual interface."
::= { ospfVirtIntfInfoEntry 17 }
ospfVirtIntfInfoNbrState OBJECT-TYPE
SYNTAX INTEGER {
down(0),attempt(1),init(2),twoway(3),
exstart(4),exchange(5),loading(6),full(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"State
down(0),attempt(1),init(2),2 way(3),
exstart(4),exchange(5),loading(6),full(7)"
::= { ospfVirtIntfInfoEntry 18 }
ospfVirtIntfInfoAreaId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AreaId of the virtual interface."
::= { ospfVirtIntfInfoEntry 19 }
-- OSPF Interface/Nbr Info Table
ospfIfNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfIfNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Interface Neighbor information."
::= { ospfinfo 5 }
ospfIfNbrEntry OBJECT-TYPE
SYNTAX OspfIfNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPF interface, neighbor pair."
INDEX { ospfIfNbrIntfIndex, ospfIfNbrIpAddr }
::= { ospfIfNbrTable 1 }
OspfIfNbrEntry ::= SEQUENCE {
ospfIfNbrIntfIndex Integer32,
ospfIfNbrIpAddr IpAddress,
ospfIfNbrPriority Integer32,
ospfIfNbrState INTEGER,
ospfIfNbrDesignatedRtr IpAddress,
ospfIfNbrBackupDesignatedRtr IpAddress,
ospfIfNbrIpAddress IpAddress
}
ospfIfNbrIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Interface number for which this Interface/Nbr table is
related."
::= { ospfIfNbrEntry 1}
ospfIfNbrIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Neighbor ID ."
::= { ospfIfNbrEntry 2 }
ospfIfNbrPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority of the OSPF neighbor."
::= { ospfIfNbrEntry 3 }
ospfIfNbrState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
attempt(2),
init(3),
twoway(4),
exStart(5),
exchange(6),
loading(7),
full(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the OSPF neighbor."
::= { ospfIfNbrEntry 4 }
ospfIfNbrDesignatedRtr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the Designated Router for this OSPF Neighbor."
::= { ospfIfNbrEntry 5 }
ospfIfNbrBackupDesignatedRtr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the backup designated Router for this OSPF Neighbor."
::= { ospfIfNbrEntry 6 }
ospfIfNbrIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of the OSPF Neighbor."
::= { ospfIfNbrEntry 7 }
-- OSPF Interface/Summary Ranges Table
ospfSumRangesInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfSumRangesInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF summary ranges information."
::= { ospfinfo 6 }
ospfSumRangesInfoEntry OBJECT-TYPE
SYNTAX OspfSumRangesInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Summary ranges information."
INDEX { ospfSumRangesInfoIndex }
::= { ospfSumRangesInfoTable 1 }
OspfSumRangesInfoEntry ::= SEQUENCE {
ospfSumRangesInfoIndex Integer32,
ospfSumRangesInfoArea INTEGER,
ospfSumRangesInfoNetwork IpAddress,
ospfSumRangesInfoMask IpAddress,
ospfSumRangesInfoAction INTEGER,
ospfSumRangesInfoListType INTEGER
}
ospfSumRangesInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF range index for which this table is
related."
::= { ospfSumRangesInfoEntry 1 }
ospfSumRangesInfoArea OBJECT-TYPE
SYNTAX INTEGER (0..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Area."
::= { ospfSumRangesInfoEntry 2 }
ospfSumRangesInfoNetwork OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Network."
::= { ospfSumRangesInfoEntry 3 }
ospfSumRangesInfoMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mask."
::= { ospfSumRangesInfoEntry 4 }
ospfSumRangesInfoAction OBJECT-TYPE
SYNTAX INTEGER {
propagate(0),
hide(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action
propagate(0),
hide(1)"
::= { ospfSumRangesInfoEntry 5 }
ospfSumRangesInfoListType OBJECT-TYPE
SYNTAX INTEGER {
non-nssa(0),
nssa(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Summary address list
Non-NSSA(0),
NSSA(1)"
::= { ospfSumRangesInfoEntry 6 }
-- OSPF Interface/Routes Table
ospfRoutesInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfRoutesInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF routes information."
::= { ospfinfo 7 }
ospfRoutesInfoEntry OBJECT-TYPE
SYNTAX OspfRoutesInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OSPF routes information."
INDEX { ospfRoutesInfoIndex }
::= { ospfRoutesInfoTable 1 }
OspfRoutesInfoEntry ::= SEQUENCE {
ospfRoutesInfoIndex Integer32,
ospfRoutesInfoDestination IpAddress,
ospfRoutesInfoMask IpAddress,
ospfRoutesInfoVia IpAddress,
ospfRoutesInfoType DisplayString
}
ospfRoutesInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF route table entry index for which
this table is related."
::= { ospfRoutesInfoEntry 1 }
ospfRoutesInfoDestination OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Destination."
::= { ospfRoutesInfoEntry 2 }
ospfRoutesInfoMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mask."
::= { ospfRoutesInfoEntry 3 }
ospfRoutesInfoVia OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Next hop."
::= { ospfRoutesInfoEntry 4 }
ospfRoutesInfoType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Route type. Codes: IA - OSPF inter area,
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
* - best"
::= { ospfRoutesInfoEntry 5 }
-- OSPF Link State Database
-- The Link State Database contains the Link State
-- Advertisements from throughout the areas that the
-- device is attached to.
-- The Area ID, in OSPF, has the same format as an IP Address,
-- but has the function of defining a summarization point for
-- Link State Advertisements.
-- The Router ID, in OSPF, has the same format as an IP Address,
-- but identifies the router independent of its IP Address.
ospfLsdbInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfLsdbInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Process's Link State Database."
REFERENCE
"OSPF Version 2, Section 12 Link State Adver-
tisements"
::= { ospfinfo 8 }
ospfLsdbInfoEntry OBJECT-TYPE
SYNTAX OspfLsdbInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Link State Advertisement."
INDEX { ospfLsdbInfoIndex }
::= { ospfLsdbInfoTable 1 }
OspfLsdbInfoEntry ::=
SEQUENCE {
ospfLsdbInfoIndex
Integer32,
ospfLsdbInfoAreaId
IpAddress,
ospfLsdbInfoType
INTEGER,
ospfLsdbInfoLsid
IpAddress,
ospfLsdbInfoRouterId
IpAddress,
ospfLsdbInfoSequence
OCTET STRING,
ospfLsdbInfoAge
Integer32,
ospfLsdbInfoChecksum
Integer32,
ospfLsdbInfoAdvertisement
OCTET STRING
}
ospfLsdbInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bit index in the table."
REFERENCE
"Private MIBS"
::= { ospfLsdbInfoEntry 1 }
ospfLsdbInfoAreaId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bit identifier of the Area from which
the LSA was received."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfLsdbInfoEntry 2 }
-- External Link State Advertisements are permitted
-- for backward compatibility, but should be displayed in
-- the ospfExtLsdbTable rather than here.
ospfLsdbInfoType OBJECT-TYPE
SYNTAX INTEGER {
routerLink (1),
networkLink (2),
summaryLink (3),
asSummaryLink (4),
asExternalLink (5), -- but see ospfExtLsdbTable
multicastLink (6),
nssaExternalLink (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate advertise-
ment format."
REFERENCE
"OSPF Version 2, Appendix A.4.1 The Link State
Advertisement header"
::= { ospfLsdbInfoEntry 3 }
ospfLsdbInfoLsid OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.4 Link State ID"
::= { ospfLsdbInfoEntry 4 }
ospfLsdbInfoRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { ospfLsdbInfoEntry 5 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
-- Modified to OCTET STRING - for BHM
ospfLsdbInfoSequence OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement - displayed here in hexazecimal."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence
number"
::= { ospfLsdbInfoEntry 6 }
ospfLsdbInfoAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state adver-
tisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { ospfLsdbInfoEntry 7 }
ospfLsdbInfoChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { ospfLsdbInfoEntry 8 }
ospfLsdbInfoAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(36))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire Link State Advertisement, including
its header. When the LSA is invalid, it is
message string 'Invalid LSDB'."
REFERENCE
"OSPF Version 2, Section 12 Link State Adver-
tisements"
::= { ospfLsdbInfoEntry 9 }
-- SPF Link State Database, External
-- The Link State Database contains the Link State
-- Advertisements from throughout the areas that the
-- device is attached to.
-- This table is identical to the OSPF LSDB Table in
-- format, but contains only External Link State
-- Advertisements. The purpose is to allow external
-- LSAs to be displayed once for the router rather
-- than once in each non-stub area.
ospfExtLsdbInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfExtLsdbInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPF Process's Links State Database."
REFERENCE
"OSPF Version 2, Section 12 Link State Adver-
tisements"
::= { ospfinfo 9 }
ospfExtLsdbInfoEntry OBJECT-TYPE
SYNTAX OspfExtLsdbInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Link State Advertisement."
INDEX { ospfExtLsdbInfoIndex }
::= { ospfExtLsdbInfoTable 1 }
OspfExtLsdbInfoEntry ::=
SEQUENCE {
ospfExtLsdbInfoIndex
Integer32,
ospfExtLsdbInfoType
INTEGER,
ospfExtLsdbInfoLsid
IpAddress,
ospfExtLsdbInfoRouterId
IpAddress,
ospfExtLsdbInfoSequence
OCTET STRING,
ospfExtLsdbInfoAge
Integer32,
ospfExtLsdbInfoChecksum
Integer32,
ospfExtLsdbInfoAdvertisement
OCTET STRING
}
ospfExtLsdbInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bit index in the table."
REFERENCE
"Private MIBS"
::= { ospfExtLsdbInfoEntry 1 }
ospfExtLsdbInfoType OBJECT-TYPE
SYNTAX INTEGER {
asExternalLink (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate advertise-
ment format."
REFERENCE
"OSPF Version 2, Appendix A.4.1 The Link State
Advertisement header"
::= { ospfExtLsdbInfoEntry 2 }
ospfExtLsdbInfoLsid OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.4 Link State ID"
::= { ospfExtLsdbInfoEntry 3 }
ospfExtLsdbInfoRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { ospfExtLsdbInfoEntry 4 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
-- Modified to OCTET STRING - for BHM
ospfExtLsdbInfoSequence OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement - displayed here in hexazecimal."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence
number"
::= { ospfExtLsdbInfoEntry 5 }
ospfExtLsdbInfoAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state adver-
tisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { ospfExtLsdbInfoEntry 6 }
ospfExtLsdbInfoChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { ospfExtLsdbInfoEntry 7 }
ospfExtLsdbInfoAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(36))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire Link State Advertisement, including
its header."
REFERENCE
"OSPF Version 2, Section 12 Link State Adver-
tisements"
::= { ospfExtLsdbInfoEntry 8 }
ospfLoopIfInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfLoopIfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPF Loopback Interface information."
::= { ospfinfo 10 }
ospfLoopIfInfoEntry OBJECT-TYPE
SYNTAX OspfLoopIfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPF loopback interface."
INDEX { ospfLoopIfInfoIndex }
::= { ospfLoopIfInfoTable 1 }
OspfLoopIfInfoEntry ::= SEQUENCE {
ospfLoopIfInfoIndex Integer32,
ospfLoopIfInfoIpAddress IpAddress,
ospfLoopIfInfoArea INTEGER,
ospfLoopIfInfoAdminStatus INTEGER,
ospfLoopIfInfoPassive INTEGER,
ospfLoopIfInfoPtop INTEGER,
ospfLoopIfInfoRouterIP IpAddress,
ospfLoopIfInfoState INTEGER,
ospfLoopIfInfoPriority INTEGER,
ospfLoopIfInfoDesignatedRouterIP IpAddress,
ospfLoopIfInfoDesignatedRouterIpAddress IpAddress,
ospfLoopIfInfoBackupDesignatedRouterIP IpAddress,
ospfLoopIfInfoBackupDesignatedRouterIpAddress IpAddress,
ospfLoopIfInfoHello INTEGER,
ospfLoopIfInfoHelloMS INTEGER,
ospfLoopIfInfoDead INTEGER,
ospfLoopIfInfoDeadMS INTEGER,
ospfLoopIfInfoWaitInterval Integer32,
ospfLoopIfInfoWaitIntervalMS INTEGER,
ospfLoopIfInfoRetransmit INTEGER,
ospfLoopIfInfoTransitDelay INTEGER,
ospfLoopIfInfoTotalNeighbours Integer32,
ospfLoopIfInfoEvents Integer32,
ospfLoopIfInfoAuthType INTEGER
}
ospfLoopIfInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF loopback interface number
for which the OSPF info table is related."
::= { ospfLoopIfInfoEntry 1}
ospfLoopIfInfoIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the OSPF loopback interface."
::= { ospfLoopIfInfoEntry 2 }
ospfLoopIfInfoArea OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the area that the loopback interface belongs."
::= { ospfLoopIfInfoEntry 3 }
ospfLoopIfInfoAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Admin Status of the interface:
down(0), up(1)."
::= { ospfLoopIfInfoEntry 4 }
ospfLoopIfInfoPassive OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Passive status of the interface:
disabled(0), enabled(1)."
::= { ospfLoopIfInfoEntry 5 }
ospfLoopIfInfoPtop OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Point-to-point status of the interface:
disabled(0), enabled(1)."
::= { ospfLoopIfInfoEntry 24 }
ospfLoopIfInfoRouterIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The router ID of the switch."
::= { ospfLoopIfInfoEntry 6 }
ospfLoopIfInfoState OBJECT-TYPE
SYNTAX INTEGER {
down(0),
loopback(1),
waiting(2),
ptop(3),
dr(4),
backupdr(5),
drother(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the interface:
Down(0), Loopback(1),
Waiting(2), P to P(3),
DR(4), BackuDR(5),
DR Other(6)."
::= { ospfLoopIfInfoEntry 7 }
ospfLoopIfInfoPriority OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface router priority"
::= { ospfLoopIfInfoEntry 8 }
ospfLoopIfInfoDesignatedRouterIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Designated Router IP (IP Address) for this OSPF interface."
::= { ospfLoopIfInfoEntry 9 }
ospfLoopIfInfoDesignatedRouterIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Designated Router IP Address for this OSPF interface."
::= { ospfLoopIfInfoEntry 10 }
ospfLoopIfInfoBackupDesignatedRouterIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Backup Designated Router IP for this OSPF
interface."
::= { ospfLoopIfInfoEntry 11 }
ospfLoopIfInfoBackupDesignatedRouterIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Backup Designated Router Ip Address for this OSPF
interface."
::= { ospfLoopIfInfoEntry 12 }
ospfLoopIfInfoHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hello timer for this OSPF interface."
::= { ospfLoopIfInfoEntry 13 }
ospfLoopIfInfoHelloMS OBJECT-TYPE
SYNTAX INTEGER {
seconds(0),
milliseconds(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Units of time measurement for Hello interval
seconds(0),
milliseconds(1)"
::= { ospfLoopIfInfoEntry 14 }
ospfLoopIfInfoDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The dead timer for this OSPF interface."
::= { ospfLoopIfInfoEntry 15 }
ospfLoopIfInfoDeadMS OBJECT-TYPE
SYNTAX INTEGER {
seconds(0),
milliseconds(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Units of time measurement for Dead interval
seconds(0),
milliseconds(1)"
::= { ospfLoopIfInfoEntry 16 }
ospfLoopIfInfoWaitInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPF Wait interval for this OSPF interface."
::= { ospfLoopIfInfoEntry 17 }
ospfLoopIfInfoWaitIntervalMS OBJECT-TYPE
SYNTAX INTEGER {
seconds(0),
milliseconds(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Units of time measurement for Wait interval
seconds(0),
milliseconds(1)"
::= { ospfLoopIfInfoEntry 18 }
ospfLoopIfInfoRetransmit OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The retransmit interval for this OSPF interface."
::= { ospfLoopIfInfoEntry 19 }
ospfLoopIfInfoTransitDelay OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transit delay for this OSPF interface."
::= { ospfLoopIfInfoEntry 20 }
ospfLoopIfInfoTotalNeighbours OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of neighbours for this OSPF interface."
::= { ospfLoopIfInfoEntry 21 }
ospfLoopIfInfoEvents OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of events for this OSPF interface."
::= { ospfLoopIfInfoEntry 22 }
ospfLoopIfInfoAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password(2),
md5(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of authentication being used:
none(1) - no authentication,
password(2) - use password,
md5(3) - use MD5 authentication."
::= { ospfLoopIfInfoEntry 23 }
-- Ospfv3 Information
ospf3GeneralInfo OBJECT IDENTIFIER ::= { ospf3Info 1 }
ospf3Version OBJECT-TYPE
SYNTAX INTEGER {
ospfVersion3(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF version."
::= { ospf3GeneralInfo 1 }
ospf3RouterID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The router ID of the switch."
::= { ospf3GeneralInfo 2 }
ospf3StartTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when ospf has been started."
::= { ospf3GeneralInfo 3 }
ospf3ProcessUptime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since ospf has been started."
::= { ospf3GeneralInfo 4 }
-- ospf3LsTypesSupported OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The Link State Types that are supported."
-- ::= { ospf3GeneralInfo 5 }
ospf3AreaBorderRouter OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Area Border Router Role."
::= { ospf3GeneralInfo 5 }
ospf3ASBoundaryRouter OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AS Boundary Router Role."
::= { ospf3GeneralInfo 6 }
ospf3ExternalLsa OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of external LSAs."
::= { ospf3GeneralInfo 7 }
ospf3IntfCountForRouter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of interfaces for this router."
::= { ospf3GeneralInfo 8 }
ospf3VlinkCountForRouter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of virtual links for this router."
::= { ospf3GeneralInfo 9 }
ospf3NewLsaReceived OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of new LSAs reveived."
::= { ospf3GeneralInfo 10 }
ospf3TotalLsaOriginated OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LSAs originated."
::= { ospf3GeneralInfo 11 }
ospf3TotalNumberOfAsScopeLsas OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of entries in the Link State Database."
::= { ospf3GeneralInfo 12 }
ospf3TotalNeighbours OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of OSPF neighbours."
::= { ospf3GeneralInfo 13 }
ospf3NbrInXchgOrLoadState OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of neighbours in the exchange or loading state."
::= { ospf3GeneralInfo 14 }
-- ospf3NbrInExchState OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The number of neighbours in the exchange state."
-- ::= { ospf3GeneralInfo 16 }
--
-- ospf3NbrInFullState OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The number of neighbours in the Full state of exchange."
-- ::= { ospf3GeneralInfo 17 }
ospf3TotalAreas OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of areas."
::= { ospf3GeneralInfo 15 }
-- ospf3TotalTransitAreas OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The Total number of Transit areas."
-- ::= { ospf3GeneralInfo 16 }
ospf3TotalActiveAreas OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of areas containing active interfaces."
::= { ospf3GeneralInfo 16 }
ospf3TotalNssaAreas OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of NSSA areas."
::= { ospf3GeneralInfo 17 }
-- ospf3TotalStubAreas OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The Total number of STUB areas."
-- ::= { ospf3GeneralInfo 19 }
ospf3OverFlowState OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether router is in overflow state or not."
DEFVAL { false }
::= { ospf3GeneralInfo 18 }
ospf3SpfDelay OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The Delay at which routing calculation is carried after a
topology change."
DEFVAL {5}
::= { ospf3GeneralInfo 19 }
ospf3SpfHoldTime OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The minimum time between two consecutive SPF calculations."
DEFVAL {10}
::= { ospf3GeneralInfo 20 }
ospf3ABRType OBJECT-TYPE
SYNTAX INTEGER {
standardABR (1),
ciscoABR (2),
ibmABR (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Different Types of ABRs supported"
REFERENCE
"RFC-3509 -- Alternative Implementations of OSPF Area Border
Routers"
DEFVAL { standardABR }
::= { ospf3GeneralInfo 21 }
ospf3NssaAsbrDefRtTrans OBJECT-TYPE
SYNTAX INTEGER {
enabled (1) ,
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the P-Bit setting for the default Type-7
LSA generated by ASBR(which is not ABR).When
disabled, P-Bit is clear in the generated default Lsa.
When enabled, P-Bit is set in the generated
Type-7 default Lsa. "
DEFVAL { disabled }
::= { ospf3GeneralInfo 22 }
ospf3AreaInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3AreaInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 Area information."
::= { ospf3Info 2 }
ospf3AreaInfoEntry OBJECT-TYPE
SYNTAX Ospf3AreaInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPFv3 area."
INDEX { ospf3AreaInfoIndex }
::= { ospf3AreaInfoTable 1 }
Ospf3AreaInfoEntry ::= SEQUENCE {
ospf3AreaInfoIndex Integer32,
ospf3AreaInfoId IpAddress,
ospf3AreaInfoStatus INTEGER,
ospf3TotalNumberOfInterfaces Integer32,
ospf3NumberOfInterfacesUp Integer32,
-- ospf3AreaInfoAuthType INTEGER,
ospf3AreaInfoSPF Integer32,
ospf3NumberOfLsdbEntries Integer32,
ospf3AreaInfoAreaBorderRouter Integer32,
ospf3AreaInfoASBoundaryRouter Integer32,
ospf3AreaInfoNeighborsFULLstate Integer32,
ospf3AreaInfoVirtNeighborsFULLstate Integer32
}
ospf3AreaInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 area number for which the OSPFv3 info table is related."
::= { ospf3AreaInfoEntry 1 }
ospf3AreaInfoId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the OSPFv3 area."
::= { ospf3AreaInfoEntry 2 }
ospf3AreaInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
-- the following two values are states:
-- these values may be read or written
active(1),
notInService(2),
-- the following value is a state:
-- this value may be read, but not written
notReady(3),
-- the following three values are
-- actions: these values may be written,
-- but are never read
createAndGo(4),
createAndWait(5),
destroy(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Area Status:
active(1), notInService(2), notReady(3)."
::= { ospf3AreaInfoEntry 3 }
ospf3TotalNumberOfInterfaces OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of interfaces for this OSPFv3 area."
::= { ospf3AreaInfoEntry 4 }
ospf3NumberOfInterfacesUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of interfaces UP in area."
::= { ospf3AreaInfoEntry 5 }
-- ospf3AreaInfoAuthType OBJECT-TYPE
-- SYNTAX INTEGER {
-- none(1),
-- password(2),
-- md5(3)
-- }
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Type of authentication being used:
-- none(1) - no authentication
-- password(2) - use password
-- md5(3) - use MD5 authentication."
-- ::= { ospf3AreaInfoEntry 6 }
ospf3AreaInfoSPF OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times SPF ran."
::= { ospf3AreaInfoEntry 6 }
ospf3NumberOfLsdbEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Area-scope link state
advertisements in this area's link state
database."
::= { ospf3AreaInfoEntry 7 }
ospf3AreaInfoAreaBorderRouter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Area Border Router count."
::= { ospf3AreaInfoEntry 8 }
ospf3AreaInfoASBoundaryRouter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS Boundary Router count."
::= { ospf3AreaInfoEntry 9 }
-- ospf3AreaInfoTotalNeighbours OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The total number of OSPFv3 neighbors."
-- ::= { ospf3AreaInfoEntry 11 }
--
-- ospf3AreaInfoNeighborsINITstate OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Total neighbors in INIT state."
-- ::= { ospf3AreaInfoEntry 12 }
--
-- ospf3AreaInfoNeighborsEXCHstate OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Total neighbors in EXCH state."
-- ::= { ospf3AreaInfoEntry 13 }
ospf3AreaInfoNeighborsFULLstate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total neighbors in FULL state."
::= { ospf3AreaInfoEntry 10 }
ospf3AreaInfoVirtNeighborsFULLstate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total neighbors in FULL state."
::= { ospf3AreaInfoEntry 11 }
ospf3IntfInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3IntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 Interface information."
::= { ospf3Info 3 }
ospf3IntfInfoEntry OBJECT-TYPE
SYNTAX Ospf3IntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPFv3 interface."
INDEX { ospf3IfInfoIndex }
::= { ospf3IntfInfoTable 1 }
Ospf3IntfInfoEntry ::= SEQUENCE {
ospf3IfInfoIndex Integer32,
ospf3IfInfoInstanceID Unsigned32,
ospf3IfInfoLLocalAddress DisplayString,
ospf3IfInfoAreaID IpAddress,
ospf3IfInfoAdminStatus INTEGER,
ospf3IfInfoPassive INTEGER,
ospf3IfInfoNetworkType INTEGER,
ospf3IfInfoState INTEGER,
ospf3IfInfoPriority INTEGER,
ospf3IfInfoDesignatedRouterID IpAddress,
ospf3IfInfoBackupDesignatedRouterID IpAddress,
ospf3IfInfoHello INTEGER,
ospf3IfInfoDead INTEGER,
ospf3IfInfoPoll Integer32,
ospf3IfInfoRetransmit INTEGER,
ospf3IfInfoTransitDelay INTEGER,
ospf3IfInfoTotalNeighbours Integer32,
ospf3IfInfoEvents Integer32,
ospf3IfInfoMetricCost Integer32
,
ospf3IfInfoAuthSpi Unsigned32,
ospf3IfInfoAuthEnable INTEGER,
ospf3IfInfoAuthType INTEGER,
ospf3IfInfoAuthKey OCTET STRING,
ospf3IfInfoEncrySpi Unsigned32,
ospf3IfInfoEncryEnable INTEGER,
ospf3IfInfoEncryType INTEGER,
ospf3IfInfoEncryKey OCTET STRING,
ospf3IfInfoEncryAuthType INTEGER,
ospf3IfInfoEncryAuthKey OCTET STRING
,
ospf3IfInfoLsaSupress INTEGER
}
ospf3IfInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 interface number for which the OSPFv3 info table is related."
::= { ospf3IntfInfoEntry 1 }
ospf3IfInfoInstanceID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 interface instance id."
::= { ospf3IntfInfoEntry 2 }
ospf3IfInfoLLocalAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the OSPFv3 interface."
::= { ospf3IntfInfoEntry 3 }
ospf3IfInfoAreaID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AreaID of the area that the interface belongs."
::= { ospf3IntfInfoEntry 4 }
ospf3IfInfoAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Admin Status of the interface:
down(0), up(1)."
::= { ospf3IntfInfoEntry 5 }
ospf3IfInfoPassive OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Passive status of the interface:
disabled(0), enabled(1)."
::= { ospf3IntfInfoEntry 6 }
ospf3IfInfoNetworkType OBJECT-TYPE
SYNTAX INTEGER {
broadcast(1),
nbma(2),
pointToPoint(3),
pointToMultipoint(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Network type of the interface:
broadcast(1),nbma(2),pointToPoint(3),pointToMultipoint(5)."
::= { ospf3IntfInfoEntry 7 }
ospf3IfInfoState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
loopback(2),
waiting(3),
pointToPoint(4),
designatedRouter(5),
backupDesignatedRouter(6),
otherDesignatedRouter(7),
standby(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the interface:
Down(0), Loopback(1),
Waiting(2), P to P(3),
DR(4), BackuDR(5),
DR Other(6)."
::= { ospf3IntfInfoEntry 8 }
ospf3IfInfoPriority OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface router priority"
::= { ospf3IntfInfoEntry 9 }
ospf3IfInfoDesignatedRouterID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 Designated Router ID for this OSPFv3 interface."
::= { ospf3IntfInfoEntry 10 }
ospf3IfInfoBackupDesignatedRouterID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 Backup Designated Router ID for this OSPFv3
interface."
::= { ospf3IntfInfoEntry 11 }
ospf3IfInfoHello OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hello timer for this OSPF3 interface."
::= { ospf3IntfInfoEntry 12 }
ospf3IfInfoDead OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The dead timer for this OSPFv3 interface."
::= { ospf3IntfInfoEntry 13 }
ospf3IfInfoPoll OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 Poll interval for this OSPFv3 interface."
::= { ospf3IntfInfoEntry 14 }
ospf3IfInfoRetransmit OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The retransmit interval for this OSPFv3 interface."
::= { ospf3IntfInfoEntry 15 }
ospf3IfInfoTransitDelay OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transit delay for this OSPFv3 interface."
::= { ospf3IntfInfoEntry 16 }
ospf3IfInfoTotalNeighbours OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of neighbours for this OSPFv3 interface."
::= { ospf3IntfInfoEntry 17 }
ospf3IfInfoEvents OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of events for this OSPF3 interface."
::= { ospf3IntfInfoEntry 18 }
ospf3IfInfoMetricCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of this OSPF3 interface."
::= { ospf3IntfInfoEntry 19 }
ospf3IfInfoAuthSpi OBJECT-TYPE
SYNTAX Unsigned32 (256..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication Spi Id(256 - 4294967295)"
::= { ospf3IntfInfoEntry 20 }
ospf3IfInfoAuthEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication Status
disabled(0),
enabled(1)"
::= { ospf3IntfInfoEntry 21 }
ospf3IfInfoAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
md5(2),
sha1(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication Type
none(0),
md5(2),
sha1(1)"
::= { ospf3IntfInfoEntry 22 }
ospf3IfInfoAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication Key
Hex-string MD5 key - 32 chars (128 bits)
Hex-string SHA-1 key - 40 chars (160 bits)"
::= { ospf3IntfInfoEntry 23 }
ospf3IfInfoEncrySpi OBJECT-TYPE
SYNTAX Unsigned32 (256..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Encryption Spi Id(256 - 4294967295)"
::= { ospf3IntfInfoEntry 24 }
ospf3IfInfoEncryEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Encryption Status
disabled(0),
enabled(1)"
::= { ospf3IntfInfoEntry 25 }
ospf3IfInfoEncryType OBJECT-TYPE
SYNTAX INTEGER {
null(0),
tripledes(2),
aes(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Encryption Authentication Type
null(0),
3des(2),
aes(3)"
::= { ospf3IntfInfoEntry 26 }
ospf3IfInfoEncryKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Encryption Key
Hex-string AES key - 32 chars (128 bits)
Hex-string 3DES key - 48 chars (192 bits)"
::= { ospf3IntfInfoEntry 27 }
ospf3IfInfoEncryAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
md5(2),
sha1(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Encryption Authentication Type
none(0),
md5(2),
sha1(1)"
::= { ospf3IntfInfoEntry 28 }
ospf3IfInfoEncryAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Encryption Authentication Key
Hex-string MD5 key - 32 chars (128 bits)
Hex-string SHA-1 key - 40 chars (160 bits)"
::= { ospf3IntfInfoEntry 29 }
ospf3IfInfoLsaSupress OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lsa supression status of the interface:
disabled(0), enabled(1)."
::= { ospf3IntfInfoEntry 30 }
-- OSPFv3 Virtual Interface Table
ospf3VirtIntfInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3VirtIntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 Virtual Interface information."
::= { ospf3Info 4 }
ospf3VirtIntfInfoEntry OBJECT-TYPE
SYNTAX Ospf3VirtIntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single virtual interface."
INDEX { ospf3VirtIfInfoIndex }
::= { ospf3VirtIntfInfoTable 1 }
Ospf3VirtIntfInfoEntry ::= SEQUENCE {
ospf3VirtIfInfoIndex Integer32,
ospf3VirtIfInfoAreaId IpAddress,
ospf3VirtIfInfoNeighbor IpAddress,
ospf3VirtIfInfoTransitDelay INTEGER,
ospf3VirtIfInfoRetransInterval INTEGER,
ospf3VirtIfInfoHelloInterval INTEGER,
ospf3VirtIfInfoRtrDeadInterval INTEGER,
ospf3VirtIfInfoState INTEGER,
ospf3VirtIfInfoEvents INTEGER,
ospf3VirtIfInfoStatus INTEGER,
ospf3VirtIfInfoLinkScopeLsaCount INTEGER,
ospf3VirtIfInfoLinkLsaCksumSum INTEGER
}
ospf3VirtIfInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 virtual interface number for which the OSPFv3
info table is related."
::= { ospf3VirtIntfInfoEntry 1 }
ospf3VirtIfInfoAreaId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transit area that the virtual link
traverses. By definition, this is not
Area 0."
::= { ospf3VirtIntfInfoEntry 2 }
ospf3VirtIfInfoNeighbor OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Router ID of the virtual neighbor."
::= { ospf3VirtIntfInfoEntry 3 }
ospf3VirtIfInfoTransitDelay OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated number of seconds it takes to
transmit a Link State Update packet over this
interface."
DEFVAL { 1 }
::= { ospf3VirtIntfInfoEntry 5 }
ospf3VirtIfInfoRetransInterval OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds between link state
advertisement retransmissions for adjacencies
belonging to this interface. This value is
also used when retransmitting database
description and Link State Request packets. This
value should be well over the expected
round-trip time."
DEFVAL { 5 }
::= { ospf3VirtIntfInfoEntry 6 }
ospf3VirtIfInfoHelloInterval OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for the
virtual neighbor."
DEFVAL { 10 }
::= { ospf3VirtIntfInfoEntry 7 }
ospf3VirtIfInfoRtrDeadInterval OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that a router's Hello
packets have not been seen before its
neighbors declare the router down. This should
be some multiple of the Hello interval. This
value must be the same for the virtual
neighbor."
DEFVAL { 60 }
::= { ospf3VirtIntfInfoEntry 8 }
ospf3VirtIfInfoState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
pointToPoint(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF virtual interface states."
::= { ospf3VirtIntfInfoEntry 9 }
ospf3VirtIfInfoEvents OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of state changes or error events on
this virtual link.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system and at other times as indicated by the
value of ospfv3DiscontinuityTime."
::= { ospf3VirtIntfInfoEntry 10 }
ospf3VirtIfInfoStatus OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
::= { ospf3VirtIntfInfoEntry 11 }
ospf3VirtIfInfoLinkScopeLsaCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link-scope link state
advertisements in this virtual link's link state
database."
::= { ospf3VirtIntfInfoEntry 12 }
ospf3VirtIfInfoLinkLsaCksumSum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit unsigned sum of the Link-scope link state
advertisements' LS checksums contained in this
virtual link's link state database. The sum can be used
to determine if there has been a change in a
router's link state database or to compare the
link state database of two routers."
::= { ospf3VirtIntfInfoEntry 13 }
-- OSPF3 Interface/Nbr Info Table
ospf3IfNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3IfNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 Interface Neighbor information."
::= { ospf3Info 5 }
ospf3IfNbrEntry OBJECT-TYPE
SYNTAX Ospf3IfNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a OSPFv3 interface, neighbor pair."
INDEX { ospf3IfNbrInfoIndex }
::= { ospf3IfNbrTable 1 }
Ospf3IfNbrEntry ::= SEQUENCE {
ospf3IfNbrInfoIndex Integer32,
ospf3IfNbrIntfIndex Integer32,
ospf3IfNbrIntfInstanceID Unsigned32,
ospf3IfNbrRtrID IpAddress,
ospf3IfNbrIpAddress DisplayString,
ospf3IfNbrPriority Integer32,
ospf3IfNbrState INTEGER,
ospf3IfNbrEvents Integer32
}
ospf3IfNbrInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 neighbor table entry index for which
this table is related."
::= { ospf3IfNbrEntry 1}
ospf3IfNbrIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 Interface number for which this Nbr table is
related."
::= { ospf3IfNbrEntry 2}
ospf3IfNbrIntfInstanceID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 Interface instance id for which this Nbr table is
related."
::= { ospf3IfNbrEntry 3}
ospf3IfNbrRtrID OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 32-bit unsigned integer uniquely identifying the
neighboring router in the Autonomous System."
::= { ospf3IfNbrEntry 4 }
ospf3IfNbrIpAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 address of the neighbor associated with
the local link."
::= { ospf3IfNbrEntry 5 }
ospf3IfNbrPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority of the OSPFv3 neighbor."
::= { ospf3IfNbrEntry 6 }
ospf3IfNbrState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
attempt(2),
init(3),
twoWay(4),
exchangeStart(5),
exchange(6),
loading(7),
full(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the relationship with this
neighbor."
::= { ospf3IfNbrEntry 7 }
ospf3IfNbrEvents OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this neighbor relationship
has changed state or an error has occurred."
::= { ospf3IfNbrEntry 8 }
-- OSPFv3 Interface/Routes Table
ospf3RoutesInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospf3RoutesInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of OSPFv3 routes information."
::= { ospf3Info 6 }
ospf3RoutesInfoEntry OBJECT-TYPE
SYNTAX Ospf3RoutesInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OSPFv3 routes information."
INDEX { ospf3RoutesInfoIndex }
::= { ospf3RoutesInfoTable 1 }
Ospf3RoutesInfoEntry ::= SEQUENCE {
ospf3RoutesInfoIndex Integer32,
ospf3RoutesInfoDestination DisplayString,
ospf3RoutesInfoPrefixLen INTEGER,
ospf3RoutesInfoNextHop DisplayString,
ospf3RoutesInfoType INTEGER,
ospf3RoutesInfoAreaId IpAddress,
ospf3RoutesInfoCost INTEGER,
ospf3RoutesInfoType2Cost INTEGER,
ospf3RoutesInfoInterfaceIndex Integer32
}
ospf3RoutesInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 route table entry index for which
this table is related."
::= { ospf3RoutesInfoEntry 1 }
ospf3RoutesInfoDestination OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The Destination IPv6 Address of this route."
::= { ospf3RoutesInfoEntry 2 }
ospf3RoutesInfoPrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the prefix length of the destination Address."
::= { ospf3RoutesInfoEntry 3 }
ospf3RoutesInfoNextHop OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Next Hop IPv6 Address for this route. For direct routes it has the
value ::0."
::= { ospf3RoutesInfoEntry 4 }
ospf3RoutesInfoType OBJECT-TYPE
SYNTAX INTEGER {
intraArea (1),
interArea (2),
type1External (3),
type2External (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of the route"
::= { ospf3RoutesInfoEntry 5 }
ospf3RoutesInfoAreaId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Area ID associated with the route "
::= { ospf3RoutesInfoEntry 6 }
ospf3RoutesInfoCost OBJECT-TYPE
SYNTAX INTEGER (1..'FFFFFF'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" It is a Type 1 external metrics which is
expressed in the same units as OSPF interface
cost ie. in terms of the OSPF link state metric.
If Type1 and Type2 cost are present, Type1 external
metrics always take precedence."
::= { ospf3RoutesInfoEntry 7 }
ospf3RoutesInfoType2Cost OBJECT-TYPE
SYNTAX INTEGER (1..'FFFFFF'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Type 2 external metrics are configured with
the cost greater than any path internal to the AS.
Use of Type 2 external metrics assumes that routing
between AS is the major cost of routing a packet, and
eliminates the need for conversion of external costs to
internal link state metrics."
::= { ospf3RoutesInfoEntry 8 }
ospf3RoutesInfoInterfaceIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Interface Index associated with the route"
::= { ospf3RoutesInfoEntry 9 }
-- Gateway Information
gatewayInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF GatewayInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing information for the default gateways."
::= { gatewayInfo 1 }
gatewayInfoEntry OBJECT-TYPE
SYNTAX GatewayInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the gateway information table"
INDEX { gatewayInfoIndex }
::= { gatewayInfoTable 1 }
GatewayInfoEntry ::= SEQUENCE {
gatewayInfoIndex Integer32,
gatewayInfoAddr IpAddress,
gatewayInfoStatus INTEGER
}
gatewayInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The gateway number for which the information is related."
::= { gatewayInfoEntry 1}
gatewayInfoAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the default gateway."
::= { gatewayInfoEntry 2 }
gatewayInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
failed(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the default gateway."
::= { gatewayInfoEntry 4 }
ipInfoBootpRelayState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of BOOTP relay."
::= { ipInfo 4 }
ipInfoBootpRelayAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of BOOTP server."
::= { ipInfo 5 }
ipInfoBootpRelayAddr2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of second BOOTP server."
::= { ipInfo 6 }
ipInfoFwdState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP forwarding global state."
::= { ipInfo 7 }
ipInfoFwdDirectedBcast OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of forwarding directed broadcasts."
::= { ipInfo 8 }
-- igmp snooping info table
igmpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IGMP group membership information."
::= { igmpInfo 1 }
igmpInfoEntry OBJECT-TYPE
SYNTAX IgmpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IGMP group member ."
INDEX { igmpInfoIndex }
::= { igmpInfoTable 1 }
IgmpInfoEntry ::= SEQUENCE {
igmpInfoIndex INTEGER,
igmpInfoGroupId IpAddress,
igmpInfoVlanId INTEGER,
igmpInfoSrcTrunk Unsigned32,
igmpInfoSrcPort PortNumber,
igmpInfoVersion INTEGER,
igmpInfoExpires DisplayString,
igmpInfoMode INTEGER,
igmpInfoSourceIp IpAddress,
igmpInfoFwd INTEGER,
igmpInfoGrpExpires DisplayString
}
igmpInfoIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The igmp group number for which the IGMP info table is related."
::= { igmpInfoEntry 1}
igmpInfoGroupId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the IGMP group."
::= { igmpInfoEntry 2}
igmpInfoVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID for this IGMP group."
::= { igmpInfoEntry 3}
igmpInfoSrcTrunk OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The downstream trunk number."
::= { igmpInfoEntry 4}
igmpInfoSrcPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The downstream port number."
::= { igmpInfoEntry 5}
igmpInfoVersion OBJECT-TYPE
SYNTAX INTEGER {
v3(1),
v2(2),
v1(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Version of IGMP host."
::= { igmpInfoEntry 6}
igmpInfoExpires OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expiration time for this host."
::= { igmpInfoEntry 7 }
igmpInfoMode OBJECT-TYPE
SYNTAX INTEGER {
exclude(1),
include(2),
na(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMPv3 filter-mode for this host.
Returned values:
exclude(1) - the IGMPv3 filter-mode is exclude.
include(2) - the IGMPv3 filter-mode is include.
na(3) - not applicable(v1 and v2)."
::= { igmpInfoEntry 8 }
igmpInfoSourceIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source IP address of the IGMP group."
::= { igmpInfoEntry 9 }
igmpInfoFwd OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMPv3 forwarding for this source/group IP for this host."
::= { igmpInfoEntry 10 }
igmpInfoGrpExpires OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expiration time for the group."
::= { igmpInfoEntry 11 }
igmpMrtrInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpMrtrInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IGMP mrouters."
::= { igmpInfo 2 }
igmpMrtrInfoEntry OBJECT-TYPE
SYNTAX IgmpMrtrInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IGMP mrouter."
INDEX { igmpMrtrInfoIndex }
::= { igmpMrtrInfoTable 1 }
IgmpMrtrInfoEntry ::= SEQUENCE {
igmpMrtrInfoIndex INTEGER,
igmpMrtrInfoVlanId INTEGER,
igmpMrtrInfoPortId DisplayString,
igmpMrtrInfoVersion INTEGER,
igmpMrtrInfoExpires DisplayString,
igmpMrtrInfoMrt Integer32,
igmpMrtrInfoQrv INTEGER,
igmpMrtrInfoQqic INTEGER,
igmpMrtrInfoSrcIp IpAddress
}
igmpMrtrInfoIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mrouter number for which the IGMP mrouter info table is related."
::= { igmpMrtrInfoEntry 1}
igmpMrtrInfoVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID on which this IGMP mrouter is attached."
::= { igmpMrtrInfoEntry 2}
igmpMrtrInfoPortId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port/portchannel alias on which this IGMP mrouter is attached."
::= { igmpMrtrInfoEntry 3}
igmpMrtrInfoVersion OBJECT-TYPE
SYNTAX INTEGER {
v1(1),
v2(2),
v3(3),
pim(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of this IGMP mrouter."
::= { igmpMrtrInfoEntry 4}
igmpMrtrInfoExpires OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expiration time for this mrouter."
::= { igmpMrtrInfoEntry 5 }
igmpMrtrInfoMrt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum Query Response time of this IGMP mrouter."
::= { igmpMrtrInfoEntry 6 }
igmpMrtrInfoQrv OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Querier Robustness value of this IGMP mrouter."
::= { igmpMrtrInfoEntry 7 }
igmpMrtrInfoQqic OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Querier query interval code of this IGMP mrouter."
::= { igmpMrtrInfoEntry 8 }
igmpMrtrInfoSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Source IP of this IGMP mrouter."
::= { igmpMrtrInfoEntry 10 }
igmpClearTables OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
clearGroups(1),
clearMrouters(2),
clearAll(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the IGMP tables. When setting clearGroups(1), the dynamic
groups are removed, when setting clearMrouters(2), the mrouter tables
are removed and when setting clearAll(3), both the dynamic groups
and the mrouter tables are removed.
When read, ok(0) is always returned."
::= { igmpInfo 3 }
-- nbr Info Table
nbrInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF NbrInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of nbrcache information."
::= { nbrInfo 1 }
nbrInfoEntry OBJECT-TYPE
SYNTAX NbrInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about neighbor discovery protocol."
INDEX { nbrInfoIndex }
::= { nbrInfoTable 1 }
NbrInfoEntry ::= SEQUENCE {
nbrInfoIndex Integer32,
nbrInfoDestIp DisplayString,
nbrInfoState INTEGER,
nbrInfoMacAddr PhysAddress,
nbrInfoVlanId Integer32,
nbrInfoPortNum Integer32,
nbrInfoAge Integer32,
nbrInfoInterface Integer32
}
nbrInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the nbrcache entry."
::= { nbrInfoEntry 1 }
nbrInfoDestIp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of the nbrcache entry."
::= { nbrInfoEntry 2 }
nbrInfoState OBJECT-TYPE
SYNTAX INTEGER {
static(1),
reach(2),
incomplete(3),
stale(4),
delay(5),
probe(6),
unknown(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the nbrcache entry."
::= { nbrInfoEntry 3 }
nbrInfoMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address for the nbrcache entry."
::= { nbrInfoEntry 4 }
nbrInfoVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier for the nbrcache entry."
::= { nbrInfoEntry 5 }
nbrInfoPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number on which this entry's equivalence is effective."
::= { nbrInfoEntry 6 }
nbrInfoAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The used time for the nbrcache entry."
::= { nbrInfoEntry 7 }
nbrInfoInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the destination address is applicable."
::= { nbrInfoEntry 8 }
nbrClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the Nbr cache,
When read ok(1) is returned."
::= { nbrInfo 2 }
-- ipv6 PMTU Info Table
ipv6PmtuInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ipv6PmtuInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Ipv6 PMTU entries."
::={ ipv6PmtuInfo 1 }
ipv6PmtuInfoEntry OBJECT-TYPE
SYNTAX Ipv6PmtuInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the ipv6 PMTU entries table."
INDEX { ipv6PmtuInfoIndx }
::= { ipv6PmtuInfoTable 1 }
Ipv6PmtuInfoEntry ::= SEQUENCE {
ipv6PmtuInfoIndx Integer32,
ipv6PmtuInfoDestIp DisplayString,
ipv6PmtuInfoSinceTime DisplayString,
ipv6PmtuInfoValue Integer32
}
ipv6PmtuInfoIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of this ipv6 PMTU table entries."
::= { ipv6PmtuInfoEntry 1 }
ipv6PmtuInfoDestIp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination of the pMTU."
::= { ipv6PmtuInfoEntry 2 }
ipv6PmtuInfoSinceTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The addubt time of the pMTU."
::= { ipv6PmtuInfoEntry 3 }
ipv6PmtuInfoValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlaue of this ipv6 PMTU table entries."
::= { ipv6PmtuInfoEntry 4 }
-- route6 Info Table
ipRoute6InfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpRoute6InfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of run-time IP6 routes."
::= { ipRoute6Info 1 }
ipRoute6InfoEntry OBJECT-TYPE
SYNTAX IpRoute6InfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the run-time IP6 route table."
INDEX { ipRoute6InfoIndx }
::= { ipRoute6InfoTable 1 }
IpRoute6InfoEntry ::= SEQUENCE {
ipRoute6InfoIndx Integer32,
ipRoute6InfoDestIp DisplayString,
ipRoute6InfoPrefLen INTEGER,
ipRoute6InfoInterface Integer32,
ipRoute6InfoNextHop DisplayString,
ipRoute6InfoProto INTEGER
}
ipRoute6InfoIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of this route6 table."
::= { ipRoute6InfoEntry 1 }
ipRoute6InfoDestIp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination of the route."
::= { ipRoute6InfoEntry 2 }
ipRoute6InfoPrefLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination prefix length of the route."
::= { ipRoute6InfoEntry 3}
ipRoute6InfoInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface of the route."
::= { ipRoute6InfoEntry 4 }
ipRoute6InfoNextHop OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next hop of the route."
::= { ipRoute6InfoEntry 5 }
ipRoute6InfoProto OBJECT-TYPE
SYNTAX INTEGER {
local(2),
static(3),
nbrdis(4),
ripng(5),
ospf(6),
intmgmt(10),
extmgmt(11),
intmgmtND(12),
extmgmtND(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol type of the route."
::= { ipRoute6InfoEntry 6 }
-- IPv6 Gateway Info
gatewayIPv6InfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF GatewayIPv6InfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing information for the IPv6 default gateways."
::= { gatewayIPv6Info 1 }
gatewayIPv6InfoEntry OBJECT-TYPE
SYNTAX GatewayIPv6InfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the IPv6 gateway information table"
INDEX { ipGatewayIPv6InfoIndex }
::= { gatewayIPv6InfoTable 1 }
GatewayIPv6InfoEntry ::= SEQUENCE {
ipGatewayIPv6InfoIndex Integer32,
ipGatewayIPv6InfoAddr IpAddress,
ipGatewayIPv6InfoState INTEGER
}
ipGatewayIPv6InfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 gateway number for which the information is related."
::= { gatewayIPv6InfoEntry 1}
ipGatewayIPv6InfoAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address for the IPv6 default gateway."
::= { gatewayIPv6InfoEntry 2 }
ipGatewayIPv6InfoState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state for the IPv6 Default Gateway."
::= { gatewayIPv6InfoEntry 3 }
-- nbrcache Info Table
rip2GeneralInfo OBJECT IDENTIFIER ::= { rip2Info 1 }
ripInfoState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP global state."
::= { rip2GeneralInfo 1 }
ripInfoUpdatePeriod OBJECT-TYPE
SYNTAX INTEGER (1..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Update Period in seconds."
::= { rip2GeneralInfo 2 }
rip2InfoIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF RipInfoIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information table of RIP."
::= { rip2Info 2 }
ripInfoIntfEntry OBJECT-TYPE
SYNTAX RipInfoIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about RIP on IP interface."
INDEX { ripInfoIntfIndex }
::= { rip2InfoIntfTable 1 }
RipInfoIntfEntry ::= SEQUENCE {
ripInfoIntfIndex Integer32,
ripInfoIntfVersion INTEGER,
ripInfoIntfAddress IpAddress,
ripInfoIntfState INTEGER,
ripInfoIntfListen INTEGER,
ripInfoIntfTrigUpdate INTEGER,
ripInfoIntfMcastUpdate INTEGER,
ripInfoIntfPoisonReverse INTEGER,
ripInfoIntfSupply INTEGER,
ripInfoIntfMetric INTEGER,
ripInfoIntfAuth INTEGER,
ripInfoIntfKey DisplayString,
ripInfoIntfDefault INTEGER
}
ripInfoIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the RIP information is related."
::= { ripInfoIntfEntry 1 }
ripInfoIntfVersion OBJECT-TYPE
SYNTAX INTEGER {
ripVersion1(1),
ripVersion2(2),
ripVersionBoth(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP version."
::= { ripInfoIntfEntry 2 }
ripInfoIntfAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface address."
::= { ripInfoIntfEntry 3 }
ripInfoIntfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of RIP protocol."
::= { ripInfoIntfEntry 4 }
ripInfoIntfListen OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of listening to route updates."
::= { ripInfoIntfEntry 5 }
ripInfoIntfTrigUpdate OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of triggered updates."
::= { ripInfoIntfEntry 6 }
ripInfoIntfMcastUpdate OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of multicast updates."
::= { ripInfoIntfEntry 7 }
ripInfoIntfPoisonReverse OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of RIP poison reverse."
::= { ripInfoIntfEntry 8 }
ripInfoIntfSupply OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of supplying route updates."
::= { ripInfoIntfEntry 9 }
ripInfoIntfMetric OBJECT-TYPE
SYNTAX INTEGER (1..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP route metric for this interface."
::= { ripInfoIntfEntry 10 }
ripInfoIntfAuth OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of Authentication used on this interface."
::= { ripInfoIntfEntry 11 }
ripInfoIntfKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RIP update authentication password."
::= { ripInfoIntfEntry 12 }
ripInfoIntfDefault OBJECT-TYPE
SYNTAX INTEGER {
both(1),
listen(2),
supply(3),
none(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies what RIP does with default routes."
::= { ripInfoIntfEntry 13 }
rip2InfoRtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RipInfoRtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The routing information table of RIP."
::= { rip2Info 3 }
ripInfoRtrEntry OBJECT-TYPE
SYNTAX RipInfoRtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about RIP routes."
INDEX { ripInfoRtrIndex }
::= { rip2InfoRtrTable 1 }
RipInfoRtrEntry ::= SEQUENCE {
ripInfoRtrIndex Integer32,
ripInfoRtrDestIp IpAddress,
ripInfoRtrMask IpAddress,
ripInfoRtrGateway IpAddress,
ripInfoRtrMetric Integer32
}
ripInfoRtrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index number of RIP route."
::= { ripInfoRtrEntry 1 }
ripInfoRtrDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination ip address of this route."
::= { ripInfoRtrEntry 2 }
ripInfoRtrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination ip mask of this route."
::= { ripInfoRtrEntry 3 }
ripInfoRtrGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next-hop router address for this route."
::= { ripInfoRtrEntry 4 }
ripInfoRtrMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric for this route."
::= { ripInfoRtrEntry 10 }
-- L3 BGP Info
bgpInfoPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpInfoPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of BGP peer in the current configuration block."
::= { bgpInfo 1 }
bgpInfoPeerEntry OBJECT-TYPE
SYNTAX BgpInfoPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a BGP peer."
INDEX { bgpInfoPeerIndex }
::= { bgpInfoPeerTable 1 }
BgpInfoPeerEntry ::= SEQUENCE {
bgpInfoPeerIndex Integer32,
bgpInfoPeerRemoteAddr IpAddress,
bgpInfoPeerVersion Integer32,
bgpInfoPeerTtl Integer32,
bgpInfoPeerRemoteAs Integer32,
bgpInfoPeerRouterId IpAddress,
bgpInfoPeerState INTEGER,
bgpInfoPeerLastState INTEGER,
bgpInfoTotalReceivedPackets Integer32,
bgpInfoTotalSentPackets Integer32,
bgpInfoReceivedUpdates Integer32,
bgpInfoSentUpdates Integer32,
bgpInfoKeepalive Integer32,
bgpInfoHoldtime Integer32,
bgpInfoMinAdvTime Integer32,
bgpInfoLastErrorCode Integer32,
bgpInfoLastErrorSubCode Integer32,
bgpInfoEstTransitions Integer32
}
bgpInfoPeerIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP peer number for which the BGP peer table is related."
::= { bgpInfoPeerEntry 1 }
bgpInfoPeerRemoteAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote IP address of the BGP peer."
::= { bgpInfoPeerEntry 2 }
bgpInfoPeerVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version negotiated by the BGP peer."
::= { bgpInfoPeerEntry 3 }
bgpInfoPeerTtl OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time-to-live value of the BGP peer IP datagram."
::= { bgpInfoPeerEntry 4 }
bgpInfoPeerRemoteAs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote IP address of the BGP peer."
::= { bgpInfoPeerEntry 5 }
bgpInfoPeerRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The router IP address."
::= { bgpInfoPeerEntry 6 }
bgpInfoPeerState OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
connect(2),
active(3),
openSent(4),
openConfirm(5),
established(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP status."
::= { bgpInfoPeerEntry 7 }
bgpInfoPeerLastState OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
connect(2),
active(3),
openSent(4),
openConfirm(5),
established(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP old status."
::= { bgpInfoPeerEntry 8 }
bgpInfoTotalReceivedPackets OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of received packets."
::= { bgpInfoPeerEntry 9 }
bgpInfoTotalSentPackets OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of sent packets."
::= { bgpInfoPeerEntry 10 }
bgpInfoReceivedUpdates OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received updates."
::= { bgpInfoPeerEntry 11 }
bgpInfoSentUpdates OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sent updates."
::= { bgpInfoPeerEntry 12 }
bgpInfoKeepalive OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The keep alive time."
::= { bgpInfoPeerEntry 13 }
bgpInfoHoldtime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hold time."
::= { bgpInfoPeerEntry 14 }
bgpInfoMinAdvTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MinAdvTime."
::= { bgpInfoPeerEntry 15 }
bgpInfoLastErrorCode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code."
::= { bgpInfoPeerEntry 16 }
bgpInfoLastErrorSubCode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error subcode."
::= { bgpInfoPeerEntry 17 }
bgpInfoEstTransitions OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The established state transitions."
::= { bgpInfoPeerEntry 18 }
bgpInfoSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpInfoSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of BGP Peer Information."
::= { bgpInfo 2 }
bgpInfoSummaryEntry OBJECT-TYPE
SYNTAX BgpInfoSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a BGP Peer."
INDEX { bgpInfoSummaryIndex }
::= { bgpInfoSummaryTable 1 }
BgpInfoSummaryEntry ::= SEQUENCE {
bgpInfoSummaryIndex Integer32,
bgpInfoSummaryRemoteAddr IpAddress,
bgpInfoSummaryVersion Integer32,
bgpInfoSummaryRemoteAs Integer32,
bgpInfoSummaryState INTEGER,
bgpInfoSummaryTotalReceivedPackets Integer32,
bgpInfoSummaryTotalSentPackets Integer32
}
bgpInfoSummaryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP Peer number for which the BGP Peer table is related."
::= { bgpInfoSummaryEntry 1 }
bgpInfoSummaryRemoteAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote IP address of the BGP Peer."
::= { bgpInfoSummaryEntry 2 }
bgpInfoSummaryVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version negotiated by the BGP Peer."
::= { bgpInfoSummaryEntry 3 }
bgpInfoSummaryRemoteAs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Remote AS."
::= { bgpInfoSummaryEntry 4 }
bgpInfoSummaryState OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
connect(2),
active(3),
openSent(4),
openConfirm(5),
established(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP status."
::= { bgpInfoSummaryEntry 5 }
bgpInfoSummaryTotalReceivedPackets OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of received packets."
::= { bgpInfoSummaryEntry 6 }
bgpInfoSummaryTotalSentPackets OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of sent packets."
::= { bgpInfoSummaryEntry 7 }
bgpInfoRtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpInfoRtrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of BGP router run-time information"
::= { bgpInfo 3 }
bgpInfoRtrTableEntry OBJECT-TYPE
SYNTAX BgpInfoRtrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The run-time information about a BGP router"
INDEX { bgpInfoIndex }
::= { bgpInfoRtrTable 1 }
BgpInfoRtrTableEntry ::= SEQUENCE {
bgpInfoIndex IpAddress,
bgpInfoNetwork IpAddress,
bgpInfoNextHop DisplayString,
bgpInfoMetr DisplayString,
bgpInfoLcPrf DisplayString,
bgpInfoWght DisplayString,
bgpInfoPath DisplayString,
bgpInfoOrigin DisplayString,
bgpInfoMask DisplayString
}
bgpInfoIndex OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP router index which is the network address."
::= { bgpInfoRtrTableEntry 1 }
bgpInfoNetwork OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP network address."
::= { bgpInfoRtrTableEntry 2 }
bgpInfoNextHop OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGPs NextHop addresses from a network."
::= { bgpInfoRtrTableEntry 3 }
bgpInfoMetr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGPs metric from a network."
::= { bgpInfoRtrTableEntry 4 }
bgpInfoLcPrf OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGPs local preference from a network."
::= { bgpInfoRtrTableEntry 5 }
bgpInfoWght OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total weight of AS paths from a network."
::= { bgpInfoRtrTableEntry 6 }
bgpInfoPath OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS paths from a network."
::= { bgpInfoRtrTableEntry 7 }
bgpInfoOrigin OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGPs route origin from a network"
::= { bgpInfoRtrTableEntry 8 }
bgpInfoMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP router subnet mask."
::= { bgpInfoRtrTableEntry 9 }
-- L3 Operational commands
vrrpOperVirtRtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpOperVirtRtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table of virtual routers."
::= { vrrpOper 1 }
vrrpOperVirtRtrEntry OBJECT-TYPE
SYNTAX VrrpOperVirtRtrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the vrrpOperVirtRtrTable "
INDEX { vrrpOperVirtRtrIndex }
::= { vrrpOperVirtRtrTable 1 }
VrrpOperVirtRtrEntry ::= SEQUENCE {
vrrpOperVirtRtrIndex Integer32,
vrrpOperVirtRtrBackup INTEGER
}
vrrpOperVirtRtrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index for the VRRP virtual router."
::= { vrrpOperVirtRtrEntry 1 }
vrrpOperVirtRtrBackup OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
backup(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to a value of 'backup(2)' it forces the specified
master virtual router into backup mode.
'ok(1)' is returned when the object is read."
::= { vrrpOperVirtRtrEntry 2 }
vrrpOperVirtRtrGroupBackup OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
backup(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to a value of 'backup(2)' it forces the specified
master virtual router group into backup mode.
'ok(1)' is returned when the object os read."
::= { vrrpOper 2 }
-- ----------------------------------------------------------------------------
-- { INSERT: ipsec
-- ----------------------------------------------------------------------------
-- ipsecCfg OBJECT IDENTIFIER ::= { layer3Configs 32 }
-- ipsecStats OBJECT IDENTIFIER ::= { layer3Stats 24 }
-- ipsecInfo OBJECT IDENTIFIER ::= { layer3Info 23 }
IPsecKeyString ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1024a"
STATUS current
DESCRIPTION "Represents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as
US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special
meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the
same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is
illegal. (Note that this also means that a string may
end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255
characters in length.
"
SYNTAX OCTET STRING (SIZE (0..1024))
-- IKEv2 Configuration
ikeGroup OBJECT IDENTIFIER ::= { ipsecCfg 1 }
ikeCurCfgProposal OBJECT IDENTIFIER ::= { ikeGroup 1 }
ikeCurCfgPropCipher OBJECT-TYPE
SYNTAX INTEGER {
des(1),
triple-des(2),
aes-cbc(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current encription algorithm used by IKEv2"
::= { ikeCurCfgProposal 1 }
ikeCurCfgPropAuth OBJECT-TYPE
SYNTAX INTEGER {
sha1(1),
md5(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current authentication algorithm used by IKEv2"
::= { ikeCurCfgProposal 2 }
ikeCurCfgPropGroup OBJECT-TYPE
SYNTAX INTEGER {
dhGroup1(1),
dhGroup2(2),
dhGroup5(3),
dhGroup14(4),
dhGroup24(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Diffie-Hellman groups used by IKEv2"
::= { ikeCurCfgProposal 3 }
ikeNewCfgProposal OBJECT IDENTIFIER ::= { ikeGroup 2 }
ikeNewCfgPropCipher OBJECT-TYPE
SYNTAX INTEGER {
des(1),
triple-des(2),
aes-cbc(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New encription algorithm used by IKEv2"
::= { ikeNewCfgProposal 1 }
ikeNewCfgPropAuth OBJECT-TYPE
SYNTAX INTEGER {
sha1(1),
md5(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New authentication algorithm used by IKEv2"
::= { ikeNewCfgProposal 2 }
ikeNewCfgPropGroup OBJECT-TYPE
SYNTAX INTEGER {
dhGroup1(1),
dhGroup2(2),
dhGroup5(3),
dhGroup14(4),
dhGroup24(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New Diffie-Hellman groups used by IKEv2"
::= { ikeNewCfgProposal 3 }
ikeCurCfgPsk OBJECT IDENTIFIER ::= { ikeGroup 3 }
ikeCurCfgPskLocalKey OBJECT-TYPE
SYNTAX IPsecKeyString (SIZE (1..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current local pre-shared key."
::= { ikeCurCfgPsk 1 }
ikeCurCfgPskRemoteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IkeCurCfgPskRemoteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the remote pre-shared key by peer address used by IKEv2."
::= { ikeCurCfgPsk 2 }
ikeCurCfgPskRemoteEntry OBJECT-TYPE
SYNTAX IkeCurCfgPskRemoteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a remote pre-shared key for a peer address."
INDEX { ikeCurCfgPskRemoteIndex }
::= { ikeCurCfgPskRemoteTable 1 }
IkeCurCfgPskRemoteEntry ::= SEQUENCE {
ikeCurCfgPskRemoteIndex Unsigned32,
ikeCurCfgPskRemoteAddr OCTET STRING,
ikeCurCfgPskRemoteKey IPsecKeyString,
ikeCurCfgPskRemoteDelete INTEGER
}
ikeCurCfgPskRemoteIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of ikeCurCfgPskRemoteTable."
::= { ikeCurCfgPskRemoteEntry 1 }
ikeCurCfgPskRemoteAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current IPv6 address of peer."
::= { ikeCurCfgPskRemoteEntry 2 }
ikeCurCfgPskRemoteKey OBJECT-TYPE
SYNTAX IPsecKeyString (SIZE (1..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current remote pre-shared key."
::= { ikeCurCfgPskRemoteEntry 3 }
ikeCurCfgPskRemoteDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read."
::= { ikeCurCfgPskRemoteEntry 4 }
ikeNewCfgPsk OBJECT IDENTIFIER ::= { ikeGroup 4 }
ikeNewCfgPskLocalKey OBJECT-TYPE
SYNTAX IPsecKeyString (SIZE (1..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New local pre-shared key."
::= { ikeNewCfgPsk 1 }
ikeNewCfgPskRemoteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IkeNewCfgPskRemoteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the remote pre-shared key by peer address used by IKEv2."
::= { ikeNewCfgPsk 2 }
ikeNewCfgPskRemoteEntry OBJECT-TYPE
SYNTAX IkeNewCfgPskRemoteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a remote pre-shared key for a peer address."
INDEX { ikeNewCfgPskRemoteIndex }
::= { ikeNewCfgPskRemoteTable 1 }
IkeNewCfgPskRemoteEntry ::= SEQUENCE {
ikeNewCfgPskRemoteIndex Unsigned32,
ikeNewCfgPskRemoteAddr OCTET STRING,
ikeNewCfgPskRemoteKey IPsecKeyString,
ikeNewCfgPskRemoteDelete INTEGER
}
ikeNewCfgPskRemoteIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of ikeNewCfgPskRemoteTable."
::= { ikeNewCfgPskRemoteEntry 1 }
ikeNewCfgPskRemoteAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"New IPv6 address of peer."
::= { ikeNewCfgPskRemoteEntry 2 }
ikeNewCfgPskRemoteKey OBJECT-TYPE
SYNTAX IPsecKeyString (SIZE (1..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"New remote pre-shared key."
::= { ikeNewCfgPskRemoteEntry 3 }
ikeNewCfgPskRemoteDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read."
::= { ikeNewCfgPskRemoteEntry 4 }
ikeCurCfgIdentity OBJECT IDENTIFIER ::= { ikeGroup 5 }
ikeCurCfgIdType OBJECT-TYPE
SYNTAX INTEGER {
ipv6-addr(0),
fqdn(1),
email(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the type of Identification being used."
::= { ikeCurCfgIdentity 1 }
ikeCurCfgIdData OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..100))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value as indicated by the Identification Type.
It can be a fully-qualified domain name string
(example.com) or a fully-qualified email address
string (jsmith@example.com)."
::= { ikeCurCfgIdentity 2 }
ikeNewCfgIdentity OBJECT IDENTIFIER ::= { ikeGroup 6 }
ikeNewCfgIdType OBJECT-TYPE
SYNTAX INTEGER {
ipv6-addr(0),
fqdn(1),
email(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the type of Identification being used."
::= { ikeNewCfgIdentity 1 }
ikeNewCfgIdData OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..100))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value as indicated by the Identification Type.
It can be a fully-qualified domain name string
(example.com) or a fully-qualified email address
string (jsmith@example.com)."
::= { ikeNewCfgIdentity 2 }
ikeCurCfgTxTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object specify the IKEv2 PDU retransmission timeout in seconds."
::= { ikeGroup 7 }
ikeNewCfgTxTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specify the new IKEv2 PDU retransmission timeout."
::= { ikeGroup 8 }
ikeCurCfgCookie OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Globally enable/disable IKEv2 cookie notify."
::= { ikeGroup 9 }
ikeNewCfgCookie OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Globally enable/disable IKEv2 cookie notify."
::= { ikeGroup 10 }
-- IPsec Configuration
ipsecGroup OBJECT IDENTIFIER ::= { ipsecCfg 2 }
ipsecCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Globally enable/disable IPsec."
::= { ipsecGroup 1 }
ipsecNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Globally enable/disable IPsec."
::= { ipsecGroup 2 }
ipsecCurCfgTxformTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsecCurCfgTxformEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing all of the IPsec transform-set."
::= { ipsecGroup 3 }
ipsecCurCfgTxformEntry OBJECT-TYPE
SYNTAX IpsecCurCfgTxformEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a IPsec transform-set."
INDEX { ipsecCurCfgTxformIndex }
::= { ipsecCurCfgTxformTable 1 }
IpsecCurCfgTxformEntry ::= SEQUENCE {
ipsecCurCfgTxformIndex Unsigned32,
ipsecCurCfgTxformAuth INTEGER,
ipsecCurCfgTxformCipher INTEGER,
ipsecCurCfgTxformIntegrity INTEGER,
ipsecCurCfgTxformMode INTEGER,
ipsecCurCfgTxformDelete INTEGER
}
ipsecCurCfgTxformIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of ipsecCurCfgTxformTable."
::= { ipsecCurCfgTxformEntry 1 }
ipsecCurCfgTxformAuth OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ah-sha1(1),
ah-md5(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication algorithm of the IPsec transform-set"
::= { ipsecCurCfgTxformEntry 2 }
ipsecCurCfgTxformCipher OBJECT-TYPE
SYNTAX INTEGER {
esp-null(0),
esp-des(1),
esp-3des(2),
esp-aes-cbc(3),
unspecified(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encryption algorithm of the IPsec transform-set"
::= { ipsecCurCfgTxformEntry 3 }
ipsecCurCfgTxformIntegrity OBJECT-TYPE
SYNTAX INTEGER {
none(0),
esp-sha1(1),
esp-md5(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interity algorithm of the IPsec transform-set"
::= { ipsecCurCfgTxformEntry 4 }
ipsecCurCfgTxformMode OBJECT-TYPE
SYNTAX INTEGER {
transport(1),
tunnel(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tunnel/transport mode of the IPsec transform-set"
::= { ipsecCurCfgTxformEntry 5 }
ipsecCurCfgTxformDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read."
::= { ipsecCurCfgTxformEntry 6 }
ipsecNewCfgTxformTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsecNewCfgTxformEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing all of the new IPsec transform-set to be apply."
::= { ipsecGroup 4 }
ipsecNewCfgTxformEntry OBJECT-TYPE
SYNTAX IpsecNewCfgTxformEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a IPsec transform-set."
INDEX { ipsecNewCfgTxformIndex }
::= { ipsecNewCfgTxformTable 1 }
IpsecNewCfgTxformEntry ::= SEQUENCE {
ipsecNewCfgTxformIndex Unsigned32,
ipsecNewCfgTxformAuth INTEGER,
ipsecNewCfgTxformCipher INTEGER,
ipsecNewCfgTxformIntegrity INTEGER,
ipsecNewCfgTxformMode INTEGER,
ipsecNewCfgTxformDelete INTEGER
}
ipsecNewCfgTxformIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of ipsecNewCfgTxformTable."
::= { ipsecNewCfgTxformEntry 1 }
ipsecNewCfgTxformAuth OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ah-sha1(1),
ah-md5(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The authentication algorithm of the IPsec transform-set"
::= { ipsecNewCfgTxformEntry 2 }
ipsecNewCfgTxformCipher OBJECT-TYPE
SYNTAX INTEGER {
esp-null(0),
esp-des(1),
esp-3des(2),
esp-aes-cbc(3),
unspecified(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The encryption algorithm of the IPsec transform-set"
::= { ipsecNewCfgTxformEntry 3 }
ipsecNewCfgTxformIntegrity OBJECT-TYPE
SYNTAX INTEGER {
none(0),
esp-sha1(1),
esp-md5(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interity algorithm of the IPsec transform-set"
::= { ipsecNewCfgTxformEntry 4 }
ipsecNewCfgTxformMode OBJECT-TYPE
SYNTAX INTEGER {
transport(1),
tunnel(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The tunnel/transport mode of the IPsec transform-set"
::= { ipsecNewCfgTxformEntry 5 }
ipsecNewCfgTxformDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read."
::= { ipsecNewCfgTxformEntry 6 }
ipsecCurCfgSelectorTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsecCurCfgSelectorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing all of the IPsec selector."
::= { ipsecGroup 5 }
ipsecCurCfgSelectorEntry OBJECT-TYPE
SYNTAX IpsecCurCfgSelectorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a IPsec selector."
INDEX { ipsecCurCfgSelectorIndex }
::= { ipsecCurCfgSelectorTable 1 }
IpsecCurCfgSelectorEntry ::= SEQUENCE {
ipsecCurCfgSelectorIndex Unsigned32,
ipsecCurCfgSelectorAction INTEGER,
ipsecCurCfgSelectorProto INTEGER,
ipsecCurCfgSelectorIcmpType Unsigned32,
ipsecCurCfgSelectorDst OCTET STRING,
ipsecCurCfgSelectorDstPrefix Unsigned32,
ipsecCurCfgSelectorSrc OCTET STRING,
ipsecCurCfgSelectorDelete INTEGER
}
ipsecCurCfgSelectorIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of ipsecCurCfgSelectorTable."
::= { ipsecCurCfgSelectorEntry 1 }
ipsecCurCfgSelectorAction OBJECT-TYPE
SYNTAX INTEGER {
unspecified(0),
permit(1),
deny(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The action of the IPsec selector"
::= { ipsecCurCfgSelectorEntry 2 }
ipsecCurCfgSelectorProto OBJECT-TYPE
SYNTAX INTEGER {
unspecified(0),
tcp(1),
icmp(2),
any(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol of the IPsec selector"
::= { ipsecCurCfgSelectorEntry 3 }
ipsecCurCfgSelectorIcmpType OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the protocol of the IPsec selector is icmp(2), This object specify
the ICMP type for the traffic selector. 0 = any."
::= { ipsecCurCfgSelectorEntry 4 }
ipsecCurCfgSelectorDst OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination ip address of the IPsec selector"
::= { ipsecCurCfgSelectorEntry 6 }
ipsecCurCfgSelectorDstPrefix OBJECT-TYPE
SYNTAX Unsigned32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination ipv6 address prefix length of the IPsec selector"
::= { ipsecCurCfgSelectorEntry 7 }
ipsecCurCfgSelectorSrc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source ip address of the IPsec selector"
::= { ipsecCurCfgSelectorEntry 8 }
ipsecCurCfgSelectorDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read."
::= { ipsecCurCfgSelectorEntry 9 }
ipsecNewCfgSelectorTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsecNewCfgSelectorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing all of the IPsec selector."
::= { ipsecGroup 6 }
ipsecNewCfgSelectorEntry OBJECT-TYPE
SYNTAX IpsecNewCfgSelectorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a IPsec selector."
INDEX { ipsecNewCfgSelectorIndex }
::= { ipsecNewCfgSelectorTable 1 }
IpsecNewCfgSelectorEntry ::= SEQUENCE {
ipsecNewCfgSelectorIndex Unsigned32,
ipsecNewCfgSelectorAction INTEGER,
ipsecNewCfgSelectorProto INTEGER,
ipsecNewCfgSelectorIcmpType Unsigned32,
ipsecNewCfgSelectorDst OCTET STRING,
ipsecNewCfgSelectorDstPrefix Unsigned32,
ipsecNewCfgSelectorSrc OCTET STRING,
ipsecNewCfgSelectorDelete INTEGER
}
ipsecNewCfgSelectorIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of ipsecNewCfgSelectorTable."
::= { ipsecNewCfgSelectorEntry 1 }
ipsecNewCfgSelectorAction OBJECT-TYPE
SYNTAX INTEGER {
unspecified(0),
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The action of the IPsec selector"
::= { ipsecNewCfgSelectorEntry 2 }
ipsecNewCfgSelectorProto OBJECT-TYPE
SYNTAX INTEGER {
unspecified(0),
tcp(1),
icmp(2),
any(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The protocol of the IPsec selector"
::= { ipsecNewCfgSelectorEntry 3 }
ipsecNewCfgSelectorIcmpType OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the protocol of the IPsec selector is icmp(2), This object specify
the ICMP type for the traffic selector. 0 = any."
::= { ipsecNewCfgSelectorEntry 4 }
ipsecNewCfgSelectorDst OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination ipv6 address of the IPsec selector"
::= { ipsecNewCfgSelectorEntry 6 }
ipsecNewCfgSelectorDstPrefix OBJECT-TYPE
SYNTAX Unsigned32 (1..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination ipv6 address prefix length of the IPsec selector"
::= { ipsecNewCfgSelectorEntry 7 }
ipsecNewCfgSelectorSrc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source ip address of the IPsec selector"
::= { ipsecNewCfgSelectorEntry 8 }
ipsecNewCfgSelectorDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read."
::= { ipsecNewCfgSelectorEntry 9 }
ipsecCurCfgDynamicPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsecCurCfgDynamicPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing all of the IPsec dynamic policies."
::= { ipsecGroup 7 }
ipsecCurCfgDynamicPolicyEntry OBJECT-TYPE
SYNTAX IpsecCurCfgDynamicPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a IPsec dynamic policy."
INDEX { ipsecCurCfgDynamicPolicyIndex }
::= { ipsecCurCfgDynamicPolicyTable 1 }
IpsecCurCfgDynamicPolicyEntry ::= SEQUENCE {
ipsecCurCfgDynamicPolicyIndex Unsigned32,
ipsecCurCfgDynamicPolicyPeer OCTET STRING,
ipsecCurCfgDynamicPolicySelector Unsigned32,
ipsecCurCfgDynamicPolicyTxform Unsigned32,
ipsecCurCfgDynamicPolicyLifetime Unsigned32,
ipsecCurCfgDynamicPolicyPfs INTEGER,
ipsecCurCfgDynamicPolicyDelete INTEGER
}
ipsecCurCfgDynamicPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of ipsecCurCfgDynamicPolicyTable."
::= { ipsecCurCfgDynamicPolicyEntry 1 }
ipsecCurCfgDynamicPolicyPeer OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote peer ip address."
::= { ipsecCurCfgDynamicPolicyEntry 2 }
ipsecCurCfgDynamicPolicySelector OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The traffic selector index for IPsec policy to refer an entry in ipsecCurCfgSelectorTable. 0 = unspecified."
::= { ipsecCurCfgDynamicPolicyEntry 3 }
ipsecCurCfgDynamicPolicyTxform OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transform set index for IPSec policy to refer an entry in ipsecCurCfgTxformTable. 0 = unspecified."
::= { ipsecCurCfgDynamicPolicyEntry 4 }
ipsecCurCfgDynamicPolicyLifetime OBJECT-TYPE
SYNTAX Unsigned32 (120..86400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SA lifetime for an IPsec policy."
::= { ipsecCurCfgDynamicPolicyEntry 5 }
ipsecCurCfgDynamicPolicyPfs OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable perfect forward security."
::= { ipsecCurCfgDynamicPolicyEntry 6 }
ipsecCurCfgDynamicPolicyDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read."
::= { ipsecCurCfgDynamicPolicyEntry 7 }
ipsecNewCfgDynamicPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsecNewCfgDynamicPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing all of the IPsec dynamic policies."
::= { ipsecGroup 8 }
ipsecNewCfgDynamicPolicyEntry OBJECT-TYPE
SYNTAX IpsecNewCfgDynamicPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a IPsec dynamic policy."
INDEX { ipsecNewCfgDynamicPolicyIndex }
::= { ipsecNewCfgDynamicPolicyTable 1 }
IpsecNewCfgDynamicPolicyEntry ::= SEQUENCE {
ipsecNewCfgDynamicPolicyIndex Unsigned32,
ipsecNewCfgDynamicPolicyPeer OCTET STRING,
ipsecNewCfgDynamicPolicySelector Unsigned32,
ipsecNewCfgDynamicPolicyTxform Unsigned32,
ipsecNewCfgDynamicPolicyLifetime Unsigned32,
ipsecNewCfgDynamicPolicyPfs INTEGER,
ipsecNewCfgDynamicPolicyDelete INTEGER
}
ipsecNewCfgDynamicPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of ipsecNewCfgDynamicPolicyTable."
::= { ipsecNewCfgDynamicPolicyEntry 1 }
ipsecNewCfgDynamicPolicyPeer OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remote peer ip address."
::= { ipsecNewCfgDynamicPolicyEntry 2 }
ipsecNewCfgDynamicPolicySelector OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The traffic selector index for IPsec policy to refer an entry in ipsecNewCfgSelectorTable. 0 = unspecified."
::= { ipsecNewCfgDynamicPolicyEntry 3 }
ipsecNewCfgDynamicPolicyTxform OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The transform set index for IPSec policy to refer an entry in ipsecNewCfgTxformTable. 0 = unspecified."
::= { ipsecNewCfgDynamicPolicyEntry 4 }
ipsecNewCfgDynamicPolicyLifetime OBJECT-TYPE
SYNTAX Unsigned32 (120..86400)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The SA lifetime for an IPsec policy."
::= { ipsecNewCfgDynamicPolicyEntry 5 }
ipsecNewCfgDynamicPolicyPfs OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable perfect forward security."
::= { ipsecNewCfgDynamicPolicyEntry 6 }
ipsecNewCfgDynamicPolicyDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read."
::= { ipsecNewCfgDynamicPolicyEntry 7 }
ipsecCurCfgManualPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsecCurCfgManualPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing all of the IPsec manual policies."
::= { ipsecGroup 9 }
ipsecCurCfgManualPolicyEntry OBJECT-TYPE
SYNTAX IpsecCurCfgManualPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a IPsec manual policy."
INDEX { ipsecCurCfgManualPolicyIndex }
::= { ipsecCurCfgManualPolicyTable 1 }
IpsecCurCfgManualPolicyEntry ::= SEQUENCE {
ipsecCurCfgManualPolicyIndex Unsigned32,
ipsecCurCfgManualPolicyPeer OCTET STRING,
ipsecCurCfgManualPolicySelector Unsigned32,
ipsecCurCfgManualPolicyTxform Unsigned32,
ipsecCurCfgManualPolicyInAhKey OCTET STRING,
ipsecCurCfgManualPolicyInAhSpi Unsigned32,
ipsecCurCfgManualPolicyOutAhKey OCTET STRING,
ipsecCurCfgManualPolicyOutAhSpi Unsigned32,
ipsecCurCfgManualPolicyInEspEncKey OCTET STRING,
ipsecCurCfgManualPolicyInEspAuthKey OCTET STRING,
ipsecCurCfgManualPolicyInEspSpi Unsigned32,
ipsecCurCfgManualPolicyOutEspEncKey OCTET STRING,
ipsecCurCfgManualPolicyOutEspAuthKey OCTET STRING,
ipsecCurCfgManualPolicyOutEspSpi Unsigned32,
ipsecCurCfgManualPolicyDelete INTEGER
}
ipsecCurCfgManualPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of ipsecCurCfgManualPolicyTable."
::= { ipsecCurCfgManualPolicyEntry 1 }
ipsecCurCfgManualPolicyPeer OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote peer ip address."
::= { ipsecCurCfgManualPolicyEntry 2 }
ipsecCurCfgManualPolicySelector OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The traffic selector index for IPsec policy to refer an entry in ipsecCurCfgSelectorTable"
::= { ipsecCurCfgManualPolicyEntry 3 }
ipsecCurCfgManualPolicyTxform OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transform set index for IPSec policy to refer an entry in ipsecCurCfgTxformTable"
::= { ipsecCurCfgManualPolicyEntry 4 }
ipsecCurCfgManualPolicyInAhKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AH inbound session key for an IPsec policy."
::= { ipsecCurCfgManualPolicyEntry 5 }
ipsecCurCfgManualPolicyInAhSpi OBJECT-TYPE
SYNTAX Unsigned32 (0 | 256..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AH inbound SPI for an IPsec policy."
::= { ipsecCurCfgManualPolicyEntry 6 }
ipsecCurCfgManualPolicyOutAhKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AH outbound session key for an IPsec policy."
::= { ipsecCurCfgManualPolicyEntry 7 }
ipsecCurCfgManualPolicyOutAhSpi OBJECT-TYPE
SYNTAX Unsigned32 (0 | 256..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AH outbound SPI for an IPsec policy."
::= { ipsecCurCfgManualPolicyEntry 8 }
ipsecCurCfgManualPolicyInEspEncKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Esp inbound cipher key for an IPsec policy."
::= { ipsecCurCfgManualPolicyEntry 9 }
ipsecCurCfgManualPolicyInEspAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Esp inbound authenticator key for an IPsec policy."
::= { ipsecCurCfgManualPolicyEntry 10 }
ipsecCurCfgManualPolicyInEspSpi OBJECT-TYPE
SYNTAX Unsigned32 (0 | 256..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Esp inbound SPI for an IPsec policy."
::= { ipsecCurCfgManualPolicyEntry 11 }
ipsecCurCfgManualPolicyOutEspEncKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Esp outbound cipher key for an IPsec policy."
::= { ipsecCurCfgManualPolicyEntry 12 }
ipsecCurCfgManualPolicyOutEspAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Esp outbound authenticator key for an IPsec policy."
::= { ipsecCurCfgManualPolicyEntry 13 }
ipsecCurCfgManualPolicyOutEspSpi OBJECT-TYPE
SYNTAX Unsigned32 (0 | 256..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Esp outbound SPI for an IPsec policy."
::= { ipsecCurCfgManualPolicyEntry 14 }
ipsecCurCfgManualPolicyDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read."
::= { ipsecCurCfgManualPolicyEntry 15 }
ipsecNewCfgManualPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsecNewCfgManualPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing all of the IPsec manual policies."
::= { ipsecGroup 10 }
ipsecNewCfgManualPolicyEntry OBJECT-TYPE
SYNTAX IpsecNewCfgManualPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a IPsec manual policy."
INDEX { ipsecNewCfgManualPolicyIndex }
::= { ipsecNewCfgManualPolicyTable 1 }
IpsecNewCfgManualPolicyEntry ::= SEQUENCE {
ipsecNewCfgManualPolicyIndex Unsigned32,
ipsecNewCfgManualPolicyPeer OCTET STRING,
ipsecNewCfgManualPolicySelector Unsigned32,
ipsecNewCfgManualPolicyTxform Unsigned32,
ipsecNewCfgManualPolicyInAhKey OCTET STRING,
ipsecNewCfgManualPolicyInAhSpi Unsigned32,
ipsecNewCfgManualPolicyOutAhKey OCTET STRING,
ipsecNewCfgManualPolicyOutAhSpi Unsigned32,
ipsecNewCfgManualPolicyInEspEncKey OCTET STRING,
ipsecNewCfgManualPolicyInEspAuthKey OCTET STRING,
ipsecNewCfgManualPolicyInEspSpi Unsigned32,
ipsecNewCfgManualPolicyOutEspEncKey OCTET STRING,
ipsecNewCfgManualPolicyOutEspAuthKey OCTET STRING,
ipsecNewCfgManualPolicyOutEspSpi Unsigned32,
ipsecNewCfgManualPolicyDelete INTEGER
}
ipsecNewCfgManualPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of ipsecNewCfgManualPolicyTable."
::= { ipsecNewCfgManualPolicyEntry 1 }
ipsecNewCfgManualPolicyPeer OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remote peer ip address."
::= { ipsecNewCfgManualPolicyEntry 2 }
ipsecNewCfgManualPolicySelector OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The traffic selector index for IPsec policy to refer an entry in ipsecNewCfgSelectorTable"
::= { ipsecNewCfgManualPolicyEntry 3 }
ipsecNewCfgManualPolicyTxform OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The transform set index for IPSec policy to refer an entry in ipsecNewCfgTxformTable"
::= { ipsecNewCfgManualPolicyEntry 4 }
ipsecNewCfgManualPolicyInAhKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The AH inbound session key for an IPsec policy."
::= { ipsecNewCfgManualPolicyEntry 5 }
ipsecNewCfgManualPolicyInAhSpi OBJECT-TYPE
SYNTAX Unsigned32 (0 | 256..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The AH inbound SPI for an IPsec policy."
::= { ipsecNewCfgManualPolicyEntry 6 }
ipsecNewCfgManualPolicyOutAhKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The AH outbound session key for an IPsec policy."
::= { ipsecNewCfgManualPolicyEntry 7 }
ipsecNewCfgManualPolicyOutAhSpi OBJECT-TYPE
SYNTAX Unsigned32 (0 | 256..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The AH outbound SPI for an IPsec policy."
::= { ipsecNewCfgManualPolicyEntry 8 }
ipsecNewCfgManualPolicyInEspEncKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Esp inbound cipher key for an IPsec policy."
::= { ipsecNewCfgManualPolicyEntry 9 }
ipsecNewCfgManualPolicyInEspAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Esp inbound authenticator key for an IPsec policy."
::= { ipsecNewCfgManualPolicyEntry 10 }
ipsecNewCfgManualPolicyInEspSpi OBJECT-TYPE
SYNTAX Unsigned32 (0 | 256..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Esp inbound SPI for an IPsec policy."
::= { ipsecNewCfgManualPolicyEntry 11 }
ipsecNewCfgManualPolicyOutEspEncKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Esp outbound cipher key for an IPsec policy."
::= { ipsecNewCfgManualPolicyEntry 12 }
ipsecNewCfgManualPolicyOutEspAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Esp outbound authenticator key for an IPsec policy."
::= { ipsecNewCfgManualPolicyEntry 13 }
ipsecNewCfgManualPolicyOutEspSpi OBJECT-TYPE
SYNTAX Unsigned32 (0 | 256..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Esp outbound SPI for an IPsec policy."
::= { ipsecNewCfgManualPolicyEntry 14 }
ipsecNewCfgManualPolicyDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read."
::= { ipsecNewCfgManualPolicyEntry 15 }
ipsecCurCfgIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsecCurCfgIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of interface IPsec policy configuration."
::= { ipsecGroup 11 }
ipsecCurCfgIfEntry OBJECT-TYPE
SYNTAX IpsecCurCfgIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of interface IPsec policy configuration."
INDEX { ipsecCurCfgIfIndex }
::= { ipsecCurCfgIfTable 1 }
IpsecCurCfgIfEntry ::= SEQUENCE {
ipsecCurCfgIfIndex Unsigned32,
ipsecCurCfgIfDynamicPolicyBmap OCTET STRING,
ipsecCurCfgIfManualPolicyBmap OCTET STRING,
ipsecCurCfgIfDelete INTEGER
}
ipsecCurCfgIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular interface."
::= { ipsecCurCfgIfEntry 1 }
ipsecCurCfgIfDynamicPolicyBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPsec dynamic policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ policy 9
|| ||
|| ||___ policy 8
|| |____ policy 7
|| . . .
||_________ policy 2
|__________ policy 1
where x : 1 - The represented policy applied to the
IP interface.
0 - The represented policy not applied to
the IP interface."
::= { ipsecCurCfgIfEntry 2 }
ipsecCurCfgIfManualPolicyBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The manual policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ policy 9
|| ||
|| ||___ policy 8
|| |____ policy 7
|| . . .
||_________ policy 2
|__________ policy 1
where x : 1 - The represented policy applied to the
IP interface.
0 - The represented policy not applied to
the IP interface."
::= { ipsecCurCfgIfEntry 5 }
ipsecCurCfgIfDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read."
::= { ipsecCurCfgIfEntry 8 }
ipsecNewCfgIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsecNewCfgIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of interface IPsec policy configuration."
::= { ipsecGroup 12 }
ipsecNewCfgIfEntry OBJECT-TYPE
SYNTAX IpsecNewCfgIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of interface IPsec policy configuration."
INDEX { ipsecNewCfgIfIndex }
::= { ipsecNewCfgIfTable 1 }
IpsecNewCfgIfEntry ::= SEQUENCE {
ipsecNewCfgIfIndex Unsigned32,
ipsecNewCfgIfDynamicPolicyBmap OCTET STRING,
ipsecNewCfgIfAddDynamicPolicy Unsigned32,
ipsecNewCfgIfDelDynamicPolicy Unsigned32,
ipsecNewCfgIfManualPolicyBmap OCTET STRING,
ipsecNewCfgIfAddManualPolicy Unsigned32,
ipsecNewCfgIfDelManualPolicy Unsigned32,
ipsecNewCfgIfDelete INTEGER
}
ipsecNewCfgIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular interface."
::= { ipsecNewCfgIfEntry 1 }
ipsecNewCfgIfDynamicPolicyBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The dynamic policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ policy 9
|| ||
|| ||___ policy 8
|| |____ policy 7
|| . . .
||_________ policy 2
|__________ policy 1
where x : 1 - The represented policy applied to the
IP interface.
0 - The represented policy not applied to
the IP interface."
::= { ipsecNewCfgIfEntry 2 }
ipsecNewCfgIfAddDynamicPolicy OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the value to a IPsec dynamic policy ID when add the
policy to IP interface. A value of 0 is always
returned when this object is read."
::= { ipsecNewCfgIfEntry 3 }
ipsecNewCfgIfDelDynamicPolicy OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the value to a IPsec dynamic policy ID when delete
the policy to IP interface. A value of 0 is always
returned when this object is read."
::= { ipsecNewCfgIfEntry 4 }
ipsecNewCfgIfManualPolicyBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The manual policies applied to the IP interface. The
policies are presented in bitmap format. This string
displays policy number from 1 to 32.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ policy 9
|| ||
|| ||___ policy 8
|| |____ policy 7
|| . . .
||_________ policy 2
|__________ policy 1
where x : 1 - The represented policy applied to the
IP interface.
0 - The represented policy not applied to
the IP interface."
::= { ipsecNewCfgIfEntry 5 }
ipsecNewCfgIfAddManualPolicy OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the value to a IPsec manual policy ID when add the
policy to IP interface. A value of 0 is always
returned when this object is read."
::= { ipsecNewCfgIfEntry 6 }
ipsecNewCfgIfDelManualPolicy OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the value to a IPsec manual policy ID when delete
the policy to IP interface. A value of 0 is always
returned when this object is read."
::= { ipsecNewCfgIfEntry 7 }
ipsecNewCfgIfDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set a value of delete(2) for this object will delete the entry, A value of
other(1) is always returned when this object is read."
::= { ipsecNewCfgIfEntry 8 }
-- IPsec Statistics
ipsecSaStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsecSaStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing all of the IPsec SA statistics."
::= { ipsecStats 1 }
ipsecSaStatsEntry OBJECT-TYPE
SYNTAX IpsecSaStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a IPsec SA statistics."
INDEX { ipsecSaStatsIndex }
::= { ipsecSaStatsTable 1 }
IpsecSaStatsEntry ::= SEQUENCE {
ipsecSaStatsIndex Unsigned32,
ipsecSaStatsSpi Unsigned32,
ipsecSaStatsProto INTEGER,
ipsecSaStatsDstAddr OCTET STRING,
ipsecSaStatsUsageTime Unsigned32,
ipsecSaStatsBytes Unsigned32,
ipsecSaStatsPkts Unsigned32
}
ipsecSaStatsIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of ipsecSaStatsEntry."
::= { ipsecSaStatsEntry 1 }
ipsecSaStatsSpi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPI used by the SA."
::= { ipsecSaStatsEntry 2 }
ipsecSaStatsProto OBJECT-TYPE
SYNTAX INTEGER {
any(0),
ah(1),
esp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The proto(AH,ESP,or Both) used by the SA."
::= { ipsecSaStatsEntry 3 }
ipsecSaStatsDstAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address for the SA."
::= { ipsecSaStatsEntry 4 }
ipsecSaStatsUsageTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in seconds) since the SA was first used."
::= { ipsecSaStatsEntry 5 }
ipsecSaStatsBytes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of bytes for the SA."
::= { ipsecSaStatsEntry 6 }
ipsecSaStatsPkts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets sent or received for the SA."
::= { ipsecSaStatsEntry 7 }
-- IPsec Information
ipsecSaInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsecSaInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing all of the IPsec SA information."
::= { ipsecInfo 1 }
ipsecSaInfoEntry OBJECT-TYPE
SYNTAX IpsecSaInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a IPsec SA information."
INDEX { ipsecSaInfoIndex }
::= { ipsecSaInfoTable 1 }
IpsecSaInfoEntry ::= SEQUENCE {
ipsecSaInfoIndex Unsigned32,
ipsecSaInfoSpi Unsigned32,
ipsecSaInfoProto INTEGER,
ipsecSaInfoDstAddr OCTET STRING,
ipsecSaInfoSrcAddr OCTET STRING,
ipsecSaInfoFlags Unsigned32,
ipsecSaInfoUlp Unsigned32,
ipsecSaInfoMode INTEGER,
ipsecSaInfoAuthAlg INTEGER,
ipsecSaInfoAuthKey OCTET STRING,
ipsecSaInfoEncrAlg INTEGER,
ipsecSaInfoEncrKey OCTET STRING
}
ipsecSaInfoIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of ipsecSaInfoEntry."
::= { ipsecSaInfoEntry 1 }
ipsecSaInfoSpi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPI used by the SA."
::= { ipsecSaInfoEntry 2 }
ipsecSaInfoProto OBJECT-TYPE
SYNTAX INTEGER {
any(0),
ah(51),
esp(50)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The proto(AH,ESP,or Both) used by the SA."
::= { ipsecSaInfoEntry 3 }
ipsecSaInfoDstAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address for the SA."
::= { ipsecSaInfoEntry 4 }
ipsecSaInfoSrcAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source IP address for the SA."
::= { ipsecSaInfoEntry 5 }
ipsecSaInfoFlags OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The direction, initiator and etc for an SA; see flag constants below:
SA_FLAG_INUSE 0x0001
SA_FLAG_DELETED 0x0002
SA_FLAG_INBOUND 0x0004
SA_FLAG_INITIATOR 0x0008
SA_FLAG_MATURE 0x0010
SA_FLAG_MIRRORED 0x0100
SA_FLAG_IP6 0x0200
SA_FLAG_IKE2 0x0400
SA_FLAG_PFS 0x0800
"
::= { ipsecSaInfoEntry 6 }
ipsecSaInfoUlp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper layer protocol for an SA; 0=any; see protocol constants below:
ICMP 1
IPv4 4
TCP 6
UDP 17
ESP 50
AH 51
IPv6 41
ICMPv6 58
"
::= { ipsecSaInfoEntry 7 }
ipsecSaInfoMode OBJECT-TYPE
SYNTAX INTEGER {
any(0),
transport(1),
tunnel(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mode for the SA."
::= { ipsecSaInfoEntry 8 }
ipsecSaInfoAuthAlg OBJECT-TYPE
SYNTAX INTEGER {
any(0),
md5(1),
sha1(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication algorithm for the SA."
::= { ipsecSaInfoEntry 9 }
ipsecSaInfoAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (20..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication key for the SA."
::= { ipsecSaInfoEntry 10 }
ipsecSaInfoEncrAlg OBJECT-TYPE
SYNTAX INTEGER {
any(0),
des(1),
triple-des(2),
blowfish(3),
aes(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encryption algorithm for the SA."
::= { ipsecSaInfoEntry 11 }
ipsecSaInfoEncrKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (20..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encryption key for the SA."
::= { ipsecSaInfoEntry 12 }
ipsecSpdInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsecSpdInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing all of the IPsec security policy information."
::= { ipsecInfo 2 }
ipsecSpdInfoEntry OBJECT-TYPE
SYNTAX IpsecSpdInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a IPsec security policy information."
INDEX { ipsecSpdInfoIndex }
::= { ipsecSpdInfoTable 1 }
IpsecSpdInfoEntry ::= SEQUENCE {
ipsecSpdInfoIndex Unsigned32,
ipsecSpdInfoFlags Unsigned32,
ipsecSpdInfoULP Unsigned32,
ipsecSpdInfoAction INTEGER,
ipsecSpdInfoDstAddr OCTET STRING,
ipsecSpdInfoSrcAddr OCTET STRING,
ipsecSpdInfoMode INTEGER,
ipsecSpdInfoSaSize Unsigned32
}
ipsecSpdInfoIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of ipsecSpdInfoEntry."
::= { ipsecSpdInfoEntry 1 }
ipsecSpdInfoFlags OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The direction, initiator and etc for an SA; see flag constants below:
SP_FLAG_INUSE 0x00000001
SP_FLAG_DELETED 0x00000002
SP_FLAG_INBOUND 0x00000004
SP_FLAG_MIRRORED 0x00000008
SP_FLAG_PFP_LADDR 0x00000100
SP_FLAG_PFP_RADDR 0x00000200
SP_FLAG_PFP_LPORT 0x00000400
SP_FLAG_PFP_RPORT 0x00000800
SP_FLAG_PFP_ULP 0x00001000
SP_MASK_PFP 0x00001f00
SP_FLAG_DF 0x00002000
SP_FLAG_DF_BIT 0x00004000
SP_MASK_DF 0x00006000
SP_FLAG_DSCP 0x00008000
SP_FLAG_ECN 0x00010000
SP_FLAG_IP6 0x00000010
SP_FLAG_IP6_TUNNEL 0x00000020
SP_FLAG_INIT 0x00000040
"
::= { ipsecSpdInfoEntry 2 }
ipsecSpdInfoULP OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport layer protocol for the SA. 0 = any. see protocol constants below:
ICMP 1
IPv4 4
TCP 6
UDP 17
ESP 50
AH 51
IPv6 41
ICMPv6 58 "
::= { ipsecSpdInfoEntry 3 }
ipsecSpdInfoAction OBJECT-TYPE
SYNTAX INTEGER {
drop(1),
apply(2),
permit(3),
bypass(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPsec action for the SA."
::= { ipsecSpdInfoEntry 4 }
ipsecSpdInfoDstAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address for the SA."
::= { ipsecSpdInfoEntry 5 }
ipsecSpdInfoSrcAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source IP address for the SA."
::= { ipsecSpdInfoEntry 6 }
ipsecSpdInfoMode OBJECT-TYPE
SYNTAX INTEGER {
any(0),
transport(1),
tunnel(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mode for the SA."
::= { ipsecSpdInfoEntry 7 }
ipsecSpdInfoSaSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SA bundle size of an Security policy."
::= { ipsecSpdInfoEntry 8 }
ipsecSpdInfoSaTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpsecSpdInfoSaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing all information of the SA nested in an IPsec security policy."
::= { ipsecInfo 3 }
ipsecSpdInfoSaEntry OBJECT-TYPE
SYNTAX IpsecSpdInfoSaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a SA information netsted in an IPsec security policy."
INDEX { ipsecSpdInfoIndex, ipsecSpdInfoSaIndex }
::= { ipsecSpdInfoSaTable 1 }
IpsecSpdInfoSaEntry ::= SEQUENCE {
ipsecSpdInfoSaIndex Unsigned32,
ipsecSpdInfoSaSecuProto INTEGER,
ipsecSpdInfoSaAuthAlg INTEGER,
ipsecSpdInfoSaEncrAlg INTEGER,
ipsecSpdInfoSaEncrKeyLen Unsigned32
}
ipsecSpdInfoSaIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index that enumerates the IPsec nested SAs ."
::= { ipsecSpdInfoSaEntry 1 }
ipsecSpdInfoSaSecuProto OBJECT-TYPE
SYNTAX INTEGER {
ah(0),
esp(1),
esp-auth(2),
esp-null(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The security protocol for the SA."
::= { ipsecSpdInfoSaEntry 2 }
ipsecSpdInfoSaAuthAlg OBJECT-TYPE
SYNTAX INTEGER {
any(0),
md5(1),
sha1(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hash algorithm used by the SA."
::= { ipsecSpdInfoSaEntry 3 }
ipsecSpdInfoSaEncrAlg OBJECT-TYPE
SYNTAX INTEGER {
any(0),
des(1),
triple-des(2),
blowfish(3),
aes(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encryption algorithm used by the SA."
::= { ipsecSpdInfoSaEntry 4 }
ipsecSpdInfoSaEncrKeyLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encryption key length of an nested SA."
::= { ipsecSpdInfoSaEntry 5 }
-- ----------------------------------------------------------------------------
-- } INSERT: layer3
-- ----------------------------------------------------------------------------
traps OBJECT IDENTIFIER ::= { g8124-mgmt 7 }
-- ----------------------------------------------------------------------------
-- { INSERT: traps
-- ----------------------------------------------------------------------------
-- SECTION 2: Temporary Object Definitions Used In traps
swTrapDisplayString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temporary string object used to store information being sent
in a Switch trap."
::= { traps 1000 }
-- SECTION 3: Trap Definitions
-- Many of the following traps include sysName, sysLocation and sysContact.
-- These variables are all defined in the rfc1213 MIB.
--
-- sysName is the administratively-assigned name for this managed node. By
-- convention, this is the node's fully-qualified domain name.
--
-- sysLocation is the physical location of this node (e.g., 'telephone closet,
-- 3rd floor').
--
-- sysContact is textual identification of the contact person for this managed
-- node, together with information on how to contact this person.
--
-- SNMP v3 traps should be defined here.
--
ibmSNMPv2Notifications OBJECT IDENTIFIER
::= { traps 0 }
swPrimaryPowerSupplyFailureNotify NOTIFICATION-TYPE
OBJECTS {
swTrapDisplayString,
sysName,
sysLocation,
sysContact
}
STATUS current
DESCRIPTION
"A swPrimaryPowerSupplyFailure trap signifies that the
primary power supply failed."
::= { ibmSNMPv2Notifications 1 }
swPrimaryPowerSupplyFixedNotify NOTIFICATION-TYPE
OBJECTS {
swTrapDisplayString,
sysName,
sysLocation,
sysContact
}
STATUS current
DESCRIPTION
"A swPrimaryPowerSupplyFixed trap signifies that the
primary power supply has been restored."
::= { ibmSNMPv2Notifications 97 }
--
-- SNMP v1 traps should be defined here.
--
swPrimaryPowerSupplyFailure TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swPrimaryPowerSupplyFailure trap signifies that the
primary power supply failed."
--#SEVERITY CRITICAL
::= 1 -- 0x01
swDefGwUp TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
ipCurCfgGwIndex,
ipCurCfgGwAddr,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swDefGwUp trap signifies that the default gateway is alive.
ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable.
The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax.
ipCurCfgGwAddr is the IP address of the default gateway."
::= 2 -- 0x02
swDefGwDown TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
ipCurCfgGwIndex,
ipCurCfgGwAddr,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swDefGwDown trap signifies that the default gateway is down.
ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable.
The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax.
ipCurCfgGwAddr is the IP address of the default gateway."
::= 3 -- 0x03
swDefGwInService TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
ipCurCfgGwIndex,
ipCurCfgGwAddr,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swDefGwInService trap signifies that the default gateway is
up and in service.
ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable.
The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax.
ipCurCfgGwAddr is the IP address of the default gateway."
::= 4 -- 0x04
swDefGwNotInService TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
ipCurCfgGwIndex,
ipCurCfgGwAddr,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swDefGwNotInService trap signifies that the default gateway
is alive but not in service.
ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable.
The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax.
ipCurCfgGwAddr is the IP address of the default gateway."
::= 5 -- 0x05
swVrrpNewMaster TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
vrrpCurCfgVirtRtrIndx,
vrrpCurCfgVirtRtrAddr,
sysName, sysLocation, sysContact }
DESCRIPTION
"The swVrrpNewMaster trap indicates that the sending agent has
transitioned to 'Master' state.
vrrpCurCfgVirtRtrIndx is the VRRP virtual router table index
referenced in vrrpCurCfgVirtRtrTable. The range is from 1 to
vrrpVirtRtrTableMaxSize.
vrrpCurCfgVirtRtrAddr is the VRRP virtual router IP address."
::= 16 -- 0x10
swVrrpNewBackup TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
vrrpCurCfgVirtRtrIndx,
vrrpCurCfgVirtRtrAddr,
sysName, sysLocation, sysContact }
DESCRIPTION
"The swVrrpNewBackup trap indicates that the sending agent has
transitioned to 'Backup' state.
vrrpCurCfgVirtRtrIndx is the VRRP virtual router table index
referenced in vrrpCurCfgVirtRtrTable. The range is from 1 to
vrrpVirtRtrTableMaxSize.
vrrpCurCfgVirtRtrAddr is the VRRP virtual router IP address."
::= 17 -- 0x11
swVrrpAuthFailure TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
vrrpCurCfgIfIndx,
vrrpCurCfgIfPasswd,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swVrrpAuthFailure trap signifies that a packet has been received
from a router whose authentication key or authentication type
conflicts with this router's authentication key or authentication
type. Implementation of this trap is optional.
vrrpCurCfgIfIndx is the VRRP interface index. This is equivalent to
ifIndex in RFC 1213 mib. The range is from 1 to vrrpIfTableMaxSize.
vrrpCurCfgIfPasswd is the password for authentication. It is a
DisplayString of 0 to 7 characters."
::= 18 -- 0x12
swLoginFailure TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swLoginFailure trap signifies that someone failed to enter a
valid username/password combination.
swTrapDisplayString specifies whether the login attempt was from
CONSOLE or TELNET. In case of TELNET login it also specifies the IP
address of the host from which the attempt was made."
::= 19 -- 0x13
swTempExceedThreshold TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swTempExceedThreshold trap signifies that the
switch temperature has exceeded maximum safety limits."
::= 22 -- 0x16
swFanFailure TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swFanFailure trap signifies that the
fan failure has been detected."
::= 24 -- 0x18
swValidLogin TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swValidLogin trap signifies that a user login has occured."
::= 25 -- 0x19
swApplyComplete TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swApplyComplete signifies that new configuration
has been applied."
::= 27 -- 0x1B
swSaveComplete TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swApplyComplete signifies that new configuration
has been saved."
::= 28 -- 0x1C
swFwDownloadSucess TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swFwDownloadSuccess signifies that firmware
has been downloaded to [image1|image2|boot image]."
::= 29 -- 0x1D
swFwDownloadFailure TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swFwDownloadFailure signifies that firmware
downloaded failed to [image1|image2|boot image]."
::= 30 -- 0x1E
swFanFailureFixed TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swFanFailureFixed trap signifies that the
fan failure has been fixed."
::= 33 -- 0x21
swStgNewRoot TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString, stgCurCfgIndex,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swStgNewRoot trap signifies that the bridge has become the new root of the STG."
--#SEVERITY INFORMATIONAL
::= 42 -- 0x2A
swCistNewRoot TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swCistNewRoot trap signifies that the bridge has become the new root of the CIST."
--#SEVERITY INFORMATIONAL
::= 43 -- 0x2B
swStgTopologyChanged TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString, stgCurCfgIndex,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swStgTopologyChanged trap signifies that there was a STG topology change."
--#SEVERITY INFORMATIONAL
::= 44 -- 0x2C
swCistTopologyChanged TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swCistTopologyChanged trap signifies that there was a CIST topology change."
--#SEVERITY INFORMATIONAL
::= 45 -- 0x2D
swHotlinksMasterUp TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swHotlinksMasterUp trap signifies that the Master interface is active."
::= 46 -- 0x2E
swHotlinksMasterDn TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swHotlinksMasterDn trap signifies that the Master interface is not active."
::= 47 -- 0x2F
swHotlinksBackupUp TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swHotlinksBackupUp trap signifies that the Backup interface is active."
::= 48 -- 0x30
swHotlinksBackupDn TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swHotlinksBackupDn trap signifies that the Backup interface is not active."
::= 49 -- 0x31
swHotlinksNone TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swHotlinksNone trap signifies that there are no active interfaces."
::= 50 -- 0x32
sfpInserted TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString, ifIndex,
sysName, sysLocation, sysContact }
DESCRIPTION "A sfpInserted trap signifies that a SFP is inserted."
--#SEVERITY INFORMATIONAL
::= 51 -- 0x33
sfpRemoved TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString, ifIndex,
sysName, sysLocation, sysContact }
DESCRIPTION "A sfpRemoved trap signifies that a SFP is removed."
--#SEVERITY INFORMATIONAL
::= 52 -- 0x34
swNTPSyncFailed TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swNTPSyncFailed trap signifies that sync with NTP server failed."
::= 61 -- 0x3D
swNTPUpdateClock TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swNTPUpdateClock trap signifies that update system clock with NTP server."
::= 62 -- 0x3E
swValidLogout TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swValidLogout trap signifies that a user logout has occured."
::= 63 -- 0x3F
swECMPGatewayUp TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swECMPGatewayUp trap signifies that the ECMP gateway is up."
--#SEVERITY INFORMATIONAL
::= 65 -- 0x41
swECMPGatewayDown TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swECMPGatewayDown trap signifies that the ECMP gateway is down."
--#SEVERITY INFORMATIONAL
::= 66 -- 0x42
swTeamingCtrlUp TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swTeamingCtrlUp trap signifies that the teaming is up."
--#SEVERITY INFORMATIONAL
::= 67 -- 0x43
swTeamingCtrlDown TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swTeamingCtrlDown trap signifies that the teaming control is down."
--#SEVERITY INFORMATIONAL
::= 68 -- 0x44
swTeamingCtrlDownTearDownBlked TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swTeamingCtrlDownTearDownBlked trap signifies that the
teaming control is down but teardown is blocked."
--#SEVERITY INFORMATIONAL
::= 69 -- 0x45
swTeamingCtrlError TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swTeamingCtrlError trap signifies error, action is undefined."
--#SEVERITY INFORMATIONAL
::= 70 -- 0x46
swTempReturnThreshold TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swTempReturnThreshold trap signifies that the switch
temperature has returned below maximum safety limits."
--#SEVERITY INFORMATIONAL
::= 31 -- 0x1F
swLACPPortBlocked TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swLACPPortBlocked trap signifies that LACP is
operationally down on a port, and traffic is blocked on the port."
--#SEVERITY INFORMATIONAL
::= 71 -- 0x47
swLACPPortUnblocked TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation,
sysContact }
DESCRIPTION "A swLACPPortUnblocked trap signifies that LACP is
operationally up on a port, and traffic is no longer blocked on
the port."
--#SEVERITY INFORMATIONAL
::= 72 -- 0x48
swVMGroupVMotion TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A altVMGroupVMotion trap signifies that a virtual machine has moved from a port to another."
--#SEVERITY INFORMATIONAL
::= 77 -- 0x4D
swVMGroupVMOnline TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A altVMGroupVMOnline trap signifies that a advance provisioned virtual machine has came online."
--#SEVERITY INFORMATIONAL
::= 78 -- 0x4E
swVMGroupVMVlanChange TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A altVMGroupVMVlanChange trap signifies that a virtual machine has entered into a vlan, or changed the vlan."
--#SEVERITY INFORMATIONAL
::= 79 -- 0x4F
swPrimaryPowerSupplyFixed TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swPrimaryPowerSupplyFixed trap signifies that the
primary power supply has been restored."
--#SEVERITY CRITICAL
::= 97 -- 0x61
swLFDPortErrdisabled TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "An swLFDPortErrdisabled trap signifies that a port is
error-disabled due to excessive link flaps."
--#SEVERITY INFORMATIONAL
::= 103 -- 0x67
swVlagInstanceUp TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swVlagInstanceUp trap signifies that vLAG instance is
up identified in the trap message."
--#SEVERITY INFORMATIONAL
::= 106 -- 0x6A
swVlagInstanceRemoteUp TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swVlagInstanceRemoteUp trap signifies that vLAG is down
but remote instance is Up."
--#SEVERITY INFORMATIONAL
::= 107 -- 0x6B
swVlagInstanceLocalUp TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swVlagInstanceLocalUp trap signifies that vLAG is down
but local instance is Up."
--#SEVERITY INFORMATIONAL
::= 108 -- 0x6C
swVlagInstanceDown TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swVlagInstanceDown trap signifies that vLAG instance is
down identified in the trap message."
--#SEVERITY INFORMATIONAL
::= 109 -- 0x6D
swVlagIslUp TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swVlagIslUp trap signifies that connection between vLAG
switches is up."
--#SEVERITY INFORMATIONAL
::= 110 -- 0x6E
swVlagIslDown TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swVlagInstanceDown trap signifies that connection between
vLAG switches is down."
--#SEVERITY INFORMATIONAL
::= 111 -- 0x6F
sw8021x TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A sw8021x trap is sent when dot1x feature is enabled."
::= 158 -- 0x9F
swDefAdminDisable TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swDefAdminDisable trap signifies that default admin account has been disabled."
::= 162 -- 0xA2
swAcntStrngPswdNotMet TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swAcntStrngPswdNotMet trap signifies that configured password does not match strong password complexity."
::= 163 -- 0xA3
swAcntLocked TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swAcntLocked trap signifies that account has been locked."
::= 164 -- 0xA4
swAcntUnlocked TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swAcntUnlocked trap signifies that account has been unlocked."
::= 165 -- 0xA5
swARPtablefull TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swARPtablefull trap signifies that ARP table is full."
::= 184 -- 0xB8
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- } INSERT: traps
-- ----------------------------------------------------------------------------
qos OBJECT IDENTIFIER ::= { g8124-mgmt 8 }
-- ----------------------------------------------------------------------------
-- { INSERT: qos
-- ----------------------------------------------------------------------------
qosConfig OBJECT IDENTIFIER ::= { qos 1 }
--Only show these objects when we have it in the CLI
--qosStats OBJECT IDENTIFIER ::= { qos 2 }
--qosInfo OBJECT IDENTIFIER ::= { qos 3 }
--qosOper OBJECT IDENTIFIER ::= { qos 4 }
qos8021p OBJECT IDENTIFIER ::= { qosConfig 1 }
qosdscp OBJECT IDENTIFIER ::= { qosConfig 2 }
-- QOS Configuration
qosCurCfgPortPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSCurCfgPortPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of QOS Port Priority configuration."
::= { qos8021p 1 }
qosCurCfgPortPriorityEntry OBJECT-TYPE
SYNTAX QoSCurCfgPortPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular QOS Port Priority configuration."
INDEX { qosCurCfgPortIndex }
::= { qosCurCfgPortPriorityTable 1 }
QoSCurCfgPortPriorityEntry ::= SEQUENCE {
qosCurCfgPortIndex PortNumber,
qosCurCfgPortPriority INTEGER
}
qosCurCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch Port Number"
::= { qosCurCfgPortPriorityEntry 1 }
qosCurCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch Port Priority Should be between 0 and 7"
::= { qosCurCfgPortPriorityEntry 2 }
qosNewCfgPortPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSNewCfgPortPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of QOS Port Priority configuration."
::= { qos8021p 2 }
qosNewCfgPortPriorityEntry OBJECT-TYPE
SYNTAX QoSNewCfgPortPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular QOS Port Priority configuration."
INDEX { qosNewCfgPortIndex }
::= { qosNewCfgPortPriorityTable 1 }
QoSNewCfgPortPriorityEntry ::= SEQUENCE {
qosNewCfgPortIndex PortNumber,
qosNewCfgPortPriority INTEGER
}
qosNewCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch Port Number"
::= { qosNewCfgPortPriorityEntry 1 }
qosNewCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch Port Priority Should be between 0 and 7"
::= { qosNewCfgPortPriorityEntry 2 }
qosCurCfgPriorityCoSTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSCurCfgPriorityCoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Frame Priority and COSq configuration."
::= { qos8021p 3 }
qosCurCfgPriorityCoSEntry OBJECT-TYPE
SYNTAX QoSCurCfgPriorityCoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Frame Priority and COSq configuration."
INDEX { qosCurCfgPriorityIndex }
::= { qosCurCfgPriorityCoSTable 1 }
QoSCurCfgPriorityCoSEntry ::= SEQUENCE {
qosCurCfgPriorityIndex INTEGER,
qosCurCfgPriorityCoSq INTEGER
}
qosCurCfgPriorityIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame priority Number"
::= { qosCurCfgPriorityCoSEntry 1 }
qosCurCfgPriorityCoSq OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CoSq for a Frame Priority Should be between 0 and 7"
::= { qosCurCfgPriorityCoSEntry 2 }
qosNewCfgPriorityCoSTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSNewCfgPriorityCoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Frame Priority and COSq configuration."
::= { qos8021p 4 }
qosNewCfgPriorityCoSEntry OBJECT-TYPE
SYNTAX QoSNewCfgPriorityCoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Frame Priority and COSq configuration."
INDEX { qosNewCfgPriorityIndex }
::= { qosNewCfgPriorityCoSTable 1 }
QoSNewCfgPriorityCoSEntry ::= SEQUENCE {
qosNewCfgPriorityIndex INTEGER,
qosNewCfgPriorityCoSq INTEGER
}
qosNewCfgPriorityIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame priority Number"
::= { qosNewCfgPriorityCoSEntry 1 }
qosNewCfgPriorityCoSq OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CoSq for a Frame Priority Should be between 0 and 7"
::= { qosNewCfgPriorityCoSEntry 2 }
qosCurCfgCosWeightTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSCurCfgCosWeightEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CoSq and Weight configuration."
::= { qos8021p 5 }
qosCurCfgCosWeightEntry OBJECT-TYPE
SYNTAX QoSCurCfgCosWeightEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CoSq and Weight configuration."
INDEX { qosCurCfgCosIndex }
::= { qosCurCfgCosWeightTable 1 }
QoSCurCfgCosWeightEntry ::= SEQUENCE {
qosCurCfgCosIndex INTEGER,
qosCurCfgCosWeight INTEGER
}
qosCurCfgCosIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CoSq Number"
::= { qosCurCfgCosWeightEntry 1 }
qosCurCfgCosWeight OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Weight of CoSq"
::= { qosCurCfgCosWeightEntry 2 }
qosNewCfgCosWeightTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSNewCfgCosWeightEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CoSq and Weight configuration."
::= { qos8021p 6 }
qosNewCfgCosWeightEntry OBJECT-TYPE
SYNTAX QoSNewCfgCosWeightEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CoSq and Weight configuration."
INDEX { qosNewCfgCosIndex }
::= { qosNewCfgCosWeightTable 1 }
QoSNewCfgCosWeightEntry ::= SEQUENCE {
qosNewCfgCosIndex INTEGER,
qosNewCfgCosWeight INTEGER
}
qosNewCfgCosIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CoSq Number"
::= { qosNewCfgCosWeightEntry 1 }
qosNewCfgCosWeight OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Weight of CoSq"
::= { qosNewCfgCosWeightEntry 2 }
qosDefaultCfg OBJECT-TYPE
SYNTAX INTEGER {
none(0),
defaultCosNum(1),
defaultWeight(2),
defaultPriority(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Load default configuration."
::= { qos8021p 9 }
qosCurCfgDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSCurCfgDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Dscp to New Dscp/802.1p priority configuration."
::= { qosdscp 1 }
qosCurCfgDscpEntry OBJECT-TYPE
SYNTAX QoSCurCfgDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Dscp to New Dscp/802.1p priority configuration"
INDEX { qosCurCfgDscpIndex }
::= { qosCurCfgDscpTable 1 }
QoSCurCfgDscpEntry ::= SEQUENCE {
qosCurCfgDscpIndex INTEGER,
qosCurCfgMapDscp INTEGER
,qosCurCfgMap8021p INTEGER
}
qosCurCfgDscpIndex OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dscp value"
::= { qosCurCfgDscpEntry 1 }
qosCurCfgMapDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Map Dscp Value"
::= { qosCurCfgDscpEntry 2 }
qosCurCfgMap8021p OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Map 802.1p value"
::= { qosCurCfgDscpEntry 3 }
qosNewCfgDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSNewCfgDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Dscp to New Dscp/802.1p priority configuration."
::= { qosdscp 2 }
qosNewCfgDscpEntry OBJECT-TYPE
SYNTAX QoSNewCfgDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Dscp to New Dscp/802.1p priority configuration"
INDEX { qosNewCfgDscpIndex }
::= { qosNewCfgDscpTable 1 }
QoSNewCfgDscpEntry ::= SEQUENCE {
qosNewCfgDscpIndex INTEGER,
qosNewCfgMapDscp INTEGER
,qosNewCfgMap8021p INTEGER
}
qosNewCfgDscpIndex OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dscp value"
::= { qosNewCfgDscpEntry 1 }
qosNewCfgMapDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Map Dscp Value"
::= { qosNewCfgDscpEntry 2 }
qosNewCfgMap8021p OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Map 802.1p value"
::= { qosNewCfgDscpEntry 3 }
qosCurCfgDscpState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is for turning on/off DSCP globally."
::= { qosdscp 3 }
qosNewCfgDscpState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is for turning on/off DSCP globally."
::= { qosdscp 4 }
-- ----------------------------------------------------------------------------
-- } INSERT: qos
-- ----------------------------------------------------------------------------
-------------------------------------------------------------------------------
-- Feature Dependent Private MIBs for g8124-mgmt
-------------------------------------------------------------------------------
acl OBJECT IDENTIFIER ::= { g8124-mgmt 9 }
-- ----------------------------------------------------------------------------
-- { INSERT: acl
-- ----------------------------------------------------------------------------
acConfig OBJECT IDENTIFIER ::= { acl 1 }
acList OBJECT IDENTIFIER ::= { acConfig 1 }
aclCfg OBJECT IDENTIFIER ::= { acConfig 4 }
vmapConfig OBJECT IDENTIFIER ::= { acl 3 }
acl6List OBJECT IDENTIFIER ::= { acConfig 5 }
aclLog OBJECT IDENTIFIER ::= { acConfig 6 }
-- ---------------------------------------------------------- --
-- Access Control List (ACL) Configuration
-- ---------------------------------------------------------- --
aclCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of current ACL configuration."
::= { acList 1 }
aclCurCfgEntry OBJECT-TYPE
SYNTAX AclCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current information about a particular ACL configuration entry."
INDEX { aclCurCfgIndex }
::= { aclCurCfgTable 1 }
AclCurCfgEntry ::= SEQUENCE {
aclCurCfgIndex Unsigned32,
aclCurCfgFilterAction INTEGER,
aclCurCfgFilterActionSetPrio INTEGER,
aclCurCfgSrcMACAddress MacAddress,
aclCurCfgSrcMACMask MacAddress,
aclCurCfgDstMACAddress MacAddress,
aclCurCfgDstMACMask MacAddress,
aclCurCfgEthernetTypeName INTEGER,
aclCurCfgEthernetTypeValue INTEGER,
aclCurCfgVLanId INTEGER,
aclCurCfgVLanMask DisplayString,
aclCurCfg8021pPriority INTEGER,
aclCurCfgTypeOfService DisplayString,
aclCurCfgProtocol DisplayString,
aclCurCfgSrcIPAddress IpAddress,
aclCurCfgSrcIPMask IpAddress,
aclCurCfgDstIPAddress IpAddress,
aclCurCfgDstIPMask IpAddress,
aclCurCfgSrcPort INTEGER,
aclCurCfgSrcPortMask DisplayString,
aclCurCfgDstPort INTEGER,
aclCurCfgDstPortMask DisplayString,
aclCurCfgTCPFlags BITS,
aclCurCfgTCPFlagsMask BITS,
aclCurCfgStatistics INTEGER,
aclCurCfgMeterAction INTEGER,
aclCurCfgMeterEnable INTEGER,
aclCurCfgKbitsSec Unsigned32,
aclCurCfgKbitsBurst INTEGER,
aclCurCfgUser INTEGER,
aclCurCfgInprofDscp INTEGER,
aclCurCfgInprofDscpEnable INTEGER,
aclCurCfgOutprofDscpEnable INTEGER
, aclCurCfgMirrorPort Integer32
, aclCurCfgLog INTEGER
, aclCurCfgFilterActionChangeVlan INTEGER
}
aclCurCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with this ACL entry."
::= { aclCurCfgEntry 1 }
aclCurCfgFilterAction OBJECT-TYPE
SYNTAX INTEGER {
none(0),
permit(1),
deny(2)
,setprio(3)
,changevlan(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The action to be performed on a packet that matches the filter
settings of this ACL entry."
::= { aclCurCfgEntry 4 }
aclCurCfgFilterActionSetPrio OBJECT-TYPE
SYNTAX INTEGER {
none(0),
prio0(1),
prio1(2),
prio2(3),
prio3(4),
prio4(5),
prio5(6),
prio6(7),
prio7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value to be used when the action to be performed is setprio
for this ACL entry."
::= { aclCurCfgEntry 5 }
aclCurCfgSrcMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source MAC address to be filtered."
::= { aclCurCfgEntry 9 }
aclCurCfgSrcMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgSrcMACAddress for filtering."
::= { aclCurCfgEntry 10 }
aclCurCfgDstMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination MAC address to be filtered."
::= { aclCurCfgEntry 11 }
aclCurCfgDstMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgDstMACAddress for filtering."
::= { aclCurCfgEntry 12 }
aclCurCfgEthernetTypeName OBJECT-TYPE
SYNTAX INTEGER {
none(0),
arp(1),
ipv4(2),
ipv6(3),
mpls(4),
rarp(5),
any(6),
other(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered."
::= { aclCurCfgEntry 13 }
aclCurCfgEthernetTypeValue OBJECT-TYPE
SYNTAX INTEGER (1536..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined value for this object."
::= { aclCurCfgEntry 14 }
aclCurCfgVLanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual LAN identifier to be filtered."
::= { aclCurCfgEntry 15 }
aclCurCfgVLanMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to aclCurCfgVLanId for filtering."
::= { aclCurCfgEntry 16 }
aclCurCfg8021pPriority OBJECT-TYPE
SYNTAX INTEGER {
none(0),
priority0(1),
priority1(2),
priority2(3),
priority3(4),
priority4(5),
priority5(6),
priority6(7),
priority7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 802.1p priority to be filtered."
::= { aclCurCfgEntry 17 }
aclCurCfgTypeOfService OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of service to be filtered.
'none' for not initialised, within the
range 0-255"
::= { aclCurCfgEntry 18 }
aclCurCfgProtocol OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol to be filtered.
'none' for not initialised, within the
range 0-255"
::= { aclCurCfgEntry 19 }
aclCurCfgSrcIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source IP address to be filtered."
::= { aclCurCfgEntry 20 }
aclCurCfgSrcIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgSrcIPAddress for filtering."
::= { aclCurCfgEntry 21 }
aclCurCfgDstIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address to be filtered."
::= { aclCurCfgEntry 22 }
aclCurCfgDstIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgDstIPAddress for filtering."
::= { aclCurCfgEntry 23 }
aclCurCfgSrcPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source TCP/UDP port number to be filtered."
::= { aclCurCfgEntry 24 }
aclCurCfgSrcPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to aclCurCfgSrcPort for filtering."
::= { aclCurCfgEntry 25 }
aclCurCfgDstPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination TCP/UDP port number to be filtered."
::= { aclCurCfgEntry 26 }
aclCurCfgDstPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to aclCurCfgDstPort for filtering."
::= { aclCurCfgEntry 27 }
aclCurCfgTCPFlags OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|--tcpSYN(6)
||||
||||-----tcpACK(3)
|||------tcpURG(2)
||-------reserved2(1)
|--------reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { aclCurCfgEntry 28 }
aclCurCfgTCPFlagsMask OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|--tcpSYN(6)
||||
||||-----tcpACK(3)
|||------tcpURG(2)
||-------reserved2(1)
|--------reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { aclCurCfgEntry 39 }
aclCurCfgStatistics OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether statistics collection for this ACL is enabled or not."
::= { aclCurCfgEntry 30 }
aclCurCfgMeterAction OBJECT-TYPE
SYNTAX INTEGER {
unconfigured(0),
outdrop(1),
outpass(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Meter Action for this ACL."
::= { aclCurCfgEntry 41 }
aclCurCfgMeterEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
disabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Meter state for this ACL."
::= { aclCurCfgEntry 42 }
aclCurCfgKbitsSec OBJECT-TYPE
SYNTAX Unsigned32 (64..10000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The commited rate of meter associated with this ACL entry."
::= { aclCurCfgEntry 43 }
aclCurCfgKbitsBurst OBJECT-TYPE
SYNTAX INTEGER {
kbits32(32),
kbits64(64),
kbits128(128),
kbits256(256),
kbits512(512),
kbits1024(1024),
kbits2048(2048),
kbits4096(4096)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maxmium burst sizeof meter associated with this ACL entry."
::= { aclCurCfgEntry 44 }
aclCurCfgUser OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set user defined priority for this ACL."
::= { aclCurCfgEntry 45 }
aclCurCfgInprofDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set in profile pkts DSCP value."
::= { aclCurCfgEntry 46 }
aclCurCfgInprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether in profile update DSCP for this ACL is enabled or not."
::= { aclCurCfgEntry 50 }
aclCurCfgOutprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether out profile update DSCP for this ACL is enabled or not."
::= { aclCurCfgEntry 51 }
aclCurCfgMirrorPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set port in the ACL for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring."
::= { aclCurCfgEntry 74 }
aclCurCfgLog OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether log for this ACL is enabled or not."
::= { aclCurCfgEntry 81 }
aclCurCfgFilterActionChangeVlan OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The classified VLAN only if the action is set as changevlan"
::= { aclCurCfgEntry 84 }
--
-- New ACL Configuration Table
--
aclNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of new ACL configuration."
::= { acList 2 }
aclNewCfgEntry OBJECT-TYPE
SYNTAX AclNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"New information about a particular ACL configuration."
INDEX { aclNewCfgIndex }
::= { aclNewCfgTable 1 }
AclNewCfgEntry ::= SEQUENCE {
aclNewCfgIndex Unsigned32,
aclNewCfgFilterAction INTEGER,
aclNewCfgFilterActionSetPrio INTEGER,
aclNewCfgSrcMACAddress MacAddress,
aclNewCfgSrcMACMask MacAddress,
aclNewCfgDstMACAddress MacAddress,
aclNewCfgDstMACMask MacAddress,
aclNewCfgEthernetTypeName INTEGER,
aclNewCfgEthernetTypeValue INTEGER,
aclNewCfgVLanId INTEGER,
aclNewCfgVLanMask DisplayString,
aclNewCfg8021pPriority INTEGER,
aclNewCfgTypeOfService DisplayString,
aclNewCfgProtocol DisplayString,
aclNewCfgSrcIPAddress IpAddress,
aclNewCfgSrcIPMask IpAddress,
aclNewCfgDstIPAddress IpAddress,
aclNewCfgDstIPMask IpAddress,
aclNewCfgSrcPort INTEGER,
aclNewCfgSrcPortMask DisplayString,
aclNewCfgDstPort INTEGER,
aclNewCfgDstPortMask DisplayString,
aclNewCfgTCPFlags BITS,
aclNewCfgTCPFlagsMask BITS,
aclNewCfgStatistics INTEGER,
aclNewCfgDelete INTEGER,
aclNewCfgMeterAction INTEGER,
aclNewCfgMeterEnable INTEGER,
aclNewCfgMbitsSec Unsigned32,
aclNewCfgKbitsBurst INTEGER,
aclNewCfgUser INTEGER,
aclNewCfgInprofDscp INTEGER,
aclNewCfgInprofDscpEnable INTEGER,
aclNewCfgOutprofDscpEnable INTEGER,
aclNewCfgReset INTEGER
, aclNewCfgEthernetReset INTEGER
, aclNewCfgIpv4Reset INTEGER
, aclNewCfgTcpudpReset INTEGER
, aclNewCfgMirrorPort Integer32
, aclNewCfgLog INTEGER
, aclNewCfgFilterActionChangeVlan INTEGER
}
aclNewCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with this ACL entry."
::= { aclNewCfgEntry 1 }
aclNewCfgFilterAction OBJECT-TYPE
SYNTAX INTEGER {
none(0),
permit(1),
deny(2)
,setprio(3)
,changevlan(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to be performed on a packet that matches the filter
settings of this ACL entry."
::= { aclNewCfgEntry 4 }
aclNewCfgFilterActionSetPrio OBJECT-TYPE
SYNTAX INTEGER {
none(0),
prio0(1),
prio1(2),
prio2(3),
prio3(4),
prio4(5),
prio5(6),
prio6(7),
prio7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The COS queue to be used when the action for this ACL entry is
set to setprio."
::= { aclNewCfgEntry 5 }
aclNewCfgSrcMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff."
::= { aclNewCfgEntry 9 }
aclNewCfgSrcMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgSrcMACAddress
for filtering."
::= { aclNewCfgEntry 10 }
aclNewCfgDstMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff."
::= { aclNewCfgEntry 11 }
aclNewCfgDstMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgDstMACAddress
for filtering."
::= { aclNewCfgEntry 12 }
aclNewCfgEthernetTypeName OBJECT-TYPE
SYNTAX INTEGER {
none(0),
arp(1),
ipv4(2),
ipv6(3),
mpls(4),
rarp(5),
any(6),
other(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7), the value of
the aclNewCfgEthernetTypeValue object is automatically set,
as follows:
aclNewCfgEthernetTypeName aclNewCfgEthernetTypeValue
none(0) 0
arp(1) 2054 (0x0806)
ipv4(2) 2048 (0x0800)
ipv6(3) 34525 (0x86dd)
mpls(4) 34887 (0x8847)
rarp(5) 32821 (0x8035)
any(6) 65535 (0xffff)
"
::= { aclNewCfgEntry 13 }
aclNewCfgEthernetTypeValue OBJECT-TYPE
SYNTAX INTEGER (1536..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined value for this object."
::= { aclNewCfgEntry 14 }
aclNewCfgVLanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The virtual LAN identifier to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgVLanMask object, if not
yet set, will be automatically set to 4095 (0xfff). When this
object is set to 0, the Vlan ACL filter is disabled."
::= { aclNewCfgEntry 15 }
aclNewCfgVLanMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask to be applied to aclNewCfgVLanId for filtering."
::= { aclNewCfgEntry 16 }
aclNewCfg8021pPriority OBJECT-TYPE
SYNTAX INTEGER {
none(0),
priority0(1),
priority1(2),
priority2(3),
priority3(4),
priority4(5),
priority5(6),
priority6(7),
priority7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 802.1p priority to be filtered."
::= { aclNewCfgEntry 17 }
aclNewCfgTypeOfService OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of service to be filtered.
'none' for not initialised, within the
range 0-255"
::= { aclNewCfgEntry 18 }
aclNewCfgProtocol OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol to be filtered.
'none' for not initialised, within the
range 0-255"
::= { aclNewCfgEntry 19 }
aclNewCfgSrcIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255."
::= { aclNewCfgEntry 20 }
aclNewCfgSrcIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgSrcIPAddress
for filtering."
::= { aclNewCfgEntry 21 }
aclNewCfgDstIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.255."
::= { aclNewCfgEntry 22 }
aclNewCfgDstIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgDstIPAddress for filtering."
::= { aclNewCfgEntry 23 }
aclNewCfgSrcPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff)."
::= { aclNewCfgEntry 24 }
aclNewCfgSrcPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask to be applied to aclNewCfgSrcPort for filtering."
::= { aclNewCfgEntry 25 }
aclNewCfgDstPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff)."
::= { aclNewCfgEntry 26 }
aclNewCfgDstPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask to be applied to aclNewCfgDstPort for filtering."
::= { aclNewCfgEntry 27 }
aclNewCfgTCPFlags OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP flags to be filtered.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|--tcpSYN(6)
||||
||||-----tcpACK(3)
|||------tcpURG(2)
||-------reserved2(1)
|--------reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { aclNewCfgEntry 28 }
aclNewCfgTCPFlagsMask OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP flags mask.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|--tcpSYN(6)
||||
||||-----tcpACK(3)
|||------tcpURG(2)
||-------reserved2(1)
|--------reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
Default value is 0x3f."
::= { aclNewCfgEntry 39 }
aclNewCfgStatistics OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether statistics collection for this ACL is enabled or not."
::= { aclNewCfgEntry 30 }
aclNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to delete an ACL entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 33 }
aclNewCfgMeterAction OBJECT-TYPE
SYNTAX INTEGER {
unconfigured(0),
outdrop(1),
outpass(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Meter Action for this ACL."
::= { aclNewCfgEntry 41 }
aclNewCfgMeterEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
disabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Meter state for this ACL."
::= { aclNewCfgEntry 42 }
aclNewCfgMbitsSec OBJECT-TYPE
SYNTAX Unsigned32 (128..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The commited rate of (multiple of 64) meter associated with this ACL entry."
::= { aclNewCfgEntry 43 }
aclNewCfgKbitsBurst OBJECT-TYPE
SYNTAX INTEGER {
kbits32(32),
kbits64(64),
kbits128(128),
kbits256(256),
kbits512(512),
kbits1024(1024),
kbits2048(2048),
kbits4096(4096)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum burst size of the meter associated with this ACL entry."
::= { aclNewCfgEntry 44 }
aclNewCfgUser OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set user defined priority for this ACL."
::= { aclNewCfgEntry 45 }
aclNewCfgInprofDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set in profile pkts DSCP value."
::= { aclNewCfgEntry 46 }
aclNewCfgInprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether in profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when setting a value
for aclNewCfgInprofDscp object."
::= { aclNewCfgEntry 50 }
aclNewCfgOutprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether out profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when setting a value
for aclNewCfgOutprofDscp object."
::= { aclNewCfgEntry 51 }
aclNewCfgReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 52 }
aclNewCfgEthernetReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL Ethernet entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 53 }
aclNewCfgIpv4Reset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL IPV4 entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 54 }
aclNewCfgTcpudpReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL Tcpudp entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 55 }
aclNewCfgMirrorPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set port in the ACL for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring."
::= { aclNewCfgEntry 74 }
aclNewCfgLog OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether log for this ACL is enabled or not."
::= { aclNewCfgEntry 81 }
aclNewCfgFilterActionChangeVlan OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN will be modified when the action for this ACL entry is
changevlan, , when this object is set to 0, the changevlan
action is disabled."
::= { aclNewCfgEntry 84 }
aclCurCfgRemarkOutProfDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclCurCfgRemarkOutProfDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Dscp to out-profile DSCP configuration."
::= { acList 3 }
aclCurCfgRemarkOutProfDscpEntry OBJECT-TYPE
SYNTAX AclCurCfgRemarkOutProfDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Dscp to out profile DSCP configuration"
INDEX { aclCurCfgRemarkOutProfDscpIndex }
::= { aclCurCfgRemarkOutProfDscpTable 1 }
AclCurCfgRemarkOutProfDscpEntry ::= SEQUENCE {
aclCurCfgRemarkOutProfDscpIndex INTEGER,
aclCurCfgRemarkOutProfDscpMkdnDscp INTEGER
}
aclCurCfgRemarkOutProfDscpIndex OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dscp value"
::= { aclCurCfgRemarkOutProfDscpEntry 1 }
aclCurCfgRemarkOutProfDscpMkdnDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Out Profile DSCP Dscp Value"
::= { aclCurCfgRemarkOutProfDscpEntry 2 }
aclNewCfgRemarkOutProfDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclNewCfgRemarkOutProfDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Dscp to out-profile DSCP configuration."
::= { acList 4 }
aclNewCfgRemarkOutProfDscpEntry OBJECT-TYPE
SYNTAX AclNewCfgRemarkOutProfDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Dscp to out profile DSCP configuration"
INDEX { aclNewCfgRemarkOutProfDscpIndex }
::= { aclNewCfgRemarkOutProfDscpTable 1 }
AclNewCfgRemarkOutProfDscpEntry ::= SEQUENCE {
aclNewCfgRemarkOutProfDscpIndex INTEGER,
aclNewCfgRemarkOutProfDscpMkdnDscp INTEGER
}
aclNewCfgRemarkOutProfDscpIndex OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dscp value"
::= { aclNewCfgRemarkOutProfDscpEntry 1 }
aclNewCfgRemarkOutProfDscpMkdnDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Out Profile DSCP Dscp Value"
::= { aclNewCfgRemarkOutProfDscpEntry 2 }
aclTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in the acl config tables."
::= { acList 5 }
-- ---------------------------------------------------------- --
-- Management Access Control List (MACL) Configuration
-- ---------------------------------------------------------- --
--
-- New Management ACL Configuration Table
--
-- ---------------------------------------------------------- --
-- Access Control List6 (ACL6) Configuration
-- ---------------------------------------------------------- --
acl6CurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF Acl6CurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of current ACL6 configuration."
::= { acl6List 1 }
acl6CurCfgEntry OBJECT-TYPE
SYNTAX Acl6CurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current information about a particular ACL6 configuration entry."
INDEX { acl6CurCfgIndex }
::= { acl6CurCfgTable 1 }
Acl6CurCfgEntry ::= SEQUENCE {
acl6CurCfgIndex Unsigned32,
acl6CurCfgFilterAction INTEGER,
acl6CurCfgFilterActionSetPrio INTEGER,
acl6CurCfgSrcIPv6Address DisplayString,
acl6CurCfgSrcIPv6PrefixLen INTEGER,
acl6CurCfgDstIPv6Address DisplayString,
acl6CurCfgDstIPv6PrefixLen INTEGER,
acl6CurCfgIPv6FlowLabel DisplayString,
acl6CurCfgIPv6TrafficClass DisplayString,
acl6CurCfgIPv6NextHeader DisplayString,
acl6CurCfgSrcPort INTEGER,
acl6CurCfgSrcPortMask DisplayString,
acl6CurCfgDstPort INTEGER,
acl6CurCfgDstPortMask DisplayString,
acl6CurCfgTCPFlags BITS,
acl6CurCfgTCPFlagsMask BITS,
acl6CurCfgStatistics INTEGER,
acl6CurCfgUser INTEGER,
acl6CurCfgInprofDscp INTEGER,
acl6CurCfgInprofDscpEnable INTEGER
, acl6CurCfgLog INTEGER
, acl6CurCfgFilterActionChangeVlan INTEGER
}
acl6CurCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with this ACL6 entry."
::= { acl6CurCfgEntry 1 }
acl6CurCfgFilterAction OBJECT-TYPE
SYNTAX INTEGER {
none(0),
permit(1),
deny(2)
,setprio(3)
,changevlan(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The action to be performed on a packet that matches the filter
settings of this ACL6 entry."
::= { acl6CurCfgEntry 3 }
acl6CurCfgFilterActionSetPrio OBJECT-TYPE
SYNTAX INTEGER {
none(0),
prio0(1),
prio1(2),
prio2(3),
prio3(4),
prio4(5),
prio5(6),
prio6(7),
prio7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value to be used when the action to be performed is setprio
for this ACL6 entry."
::= { acl6CurCfgEntry 4 }
acl6CurCfgSrcIPv6Address OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { acl6CurCfgEntry 5 }
acl6CurCfgSrcIPv6PrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering."
::= { acl6CurCfgEntry 6 }
acl6CurCfgDstIPv6Address OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { acl6CurCfgEntry 7 }
acl6CurCfgDstIPv6PrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering."
::= { acl6CurCfgEntry 8 }
acl6CurCfgIPv6FlowLabel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 FlowLabel to be filtered.
'none' for not initialised, within the
range 0-1048575"
::= { acl6CurCfgEntry 9 }
acl6CurCfgIPv6TrafficClass OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 Traffic Class to be filtered.
'none' for not initialised, within the
range 0-255"
::= { acl6CurCfgEntry 10 }
acl6CurCfgIPv6NextHeader OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 next header to be filtered.
'none' for not initialised, within the
range 0-255"
::= { acl6CurCfgEntry 11 }
acl6CurCfgSrcPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source TCP/UDP port number to be filtered."
::= { acl6CurCfgEntry 12 }
acl6CurCfgSrcPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to acl6CurCfgSrcPort for filtering."
::= { acl6CurCfgEntry 13 }
acl6CurCfgDstPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination TCP/UDP port number to be filtered."
::= { acl6CurCfgEntry 14 }
acl6CurCfgDstPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to acl6CurCfgDstPort for filtering."
::= { acl6CurCfgEntry 15 }
acl6CurCfgTCPFlags OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|--tcpSYN(6)
||||
||||-----tcpACK(3)
|||------tcpURG(2)
||-------reserved2(1)
|--------reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { acl6CurCfgEntry 16 }
acl6CurCfgTCPFlagsMask OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|--tcpSYN(6)
||||
||||-----tcpACK(3)
|||------tcpURG(2)
||-------reserved2(1)
|--------reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { acl6CurCfgEntry 17 }
acl6CurCfgStatistics OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether statistics collection for this ACL6 is enabled or not."
::= { acl6CurCfgEntry 19 }
acl6CurCfgUser OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set user defined priority for this ACL6."
::= { acl6CurCfgEntry 20 }
acl6CurCfgInprofDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set in profile pkts DSCP value."
::= { acl6CurCfgEntry 21 }
acl6CurCfgInprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether in profile update DSCP for this ACL6 is enabled or not."
::= { acl6CurCfgEntry 25 }
acl6CurCfgLog OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether log for this ACL is enabled or not."
::= { acl6CurCfgEntry 26 }
acl6CurCfgFilterActionChangeVlan OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The classified VLAN only if the action is set as changevlan"
::= { acl6CurCfgEntry 27 }
--
-- New ACL6 Configuration Table
--
acl6NewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF Acl6NewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of new ACL6 configuration."
::= { acl6List 2 }
acl6NewCfgEntry OBJECT-TYPE
SYNTAX Acl6NewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"New information about a particular ACL6 configuration."
INDEX { acl6NewCfgIndex }
::= { acl6NewCfgTable 1 }
Acl6NewCfgEntry ::= SEQUENCE {
acl6NewCfgIndex Unsigned32,
acl6NewCfgFilterAction INTEGER,
acl6NewCfgFilterActionSetPrio INTEGER,
acl6NewCfgSrcIPv6Address DisplayString,
acl6NewCfgSrcIPv6PrefixLen INTEGER,
acl6NewCfgDstIPv6Address DisplayString,
acl6NewCfgDstIPv6PrefixLen INTEGER,
acl6NewCfgIPv6FlowLabel DisplayString,
acl6NewCfgIPv6TrafficClass DisplayString,
acl6NewCfgIPv6NextHeader DisplayString,
acl6NewCfgSrcPort INTEGER,
acl6NewCfgSrcPortMask DisplayString,
acl6NewCfgDstPort INTEGER,
acl6NewCfgDstPortMask DisplayString,
acl6NewCfgTCPFlags BITS,
acl6NewCfgTCPFlagsMask BITS,
acl6NewCfgStatistics INTEGER,
acl6NewCfgDelete INTEGER,
acl6NewCfgUser INTEGER,
acl6NewCfgInprofDscp INTEGER,
acl6NewCfgInprofDscpEnable INTEGER
, acl6NewCfgIPv6Reset INTEGER
, acl6NewCfgTcpudpReset INTEGER
, acl6NewCfgLog INTEGER
, acl6NewCfgFilterActionChangeVlan INTEGER
}
acl6NewCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with this ACL6 entry."
::= { acl6NewCfgEntry 1 }
acl6NewCfgFilterAction OBJECT-TYPE
SYNTAX INTEGER {
none(0),
permit(1),
deny(2)
,setprio(3)
,changevlan(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to be performed on a packet that matches the filter
settings of this ACL6 entry."
::= { acl6NewCfgEntry 3 }
acl6NewCfgFilterActionSetPrio OBJECT-TYPE
SYNTAX INTEGER {
none(0),
prio0(1),
prio1(2),
prio2(3),
prio3(4),
prio4(5),
prio5(6),
prio6(7),
prio7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The COS queue to be used when the action for this ACL6 entry is
set to setprio."
::= { acl6NewCfgEntry 4 }
acl6NewCfgSrcIPv6Address OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { acl6NewCfgEntry 5 }
acl6NewCfgSrcIPv6PrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering."
::= { acl6NewCfgEntry 6 }
acl6NewCfgDstIPv6Address OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { acl6NewCfgEntry 7 }
acl6NewCfgDstIPv6PrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering."
::= { acl6NewCfgEntry 8 }
acl6NewCfgIPv6FlowLabel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 flow label to be filtered.
'none' for not initialised, within the
range 0-1048575"
::= { acl6NewCfgEntry 9 }
acl6NewCfgIPv6TrafficClass OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 traffic class to be filtered.
'none' for not initialised, within the
range 0-255"
::= { acl6NewCfgEntry 10 }
acl6NewCfgIPv6NextHeader OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 next header to be filtered.
'none' for not initialised, within the
range 0-255"
::= { acl6NewCfgEntry 11 }
acl6NewCfgSrcPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source TCP/UDP port number to be filtered."
::= { acl6NewCfgEntry 12 }
acl6NewCfgSrcPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask applied to acl6CurCfgSrcPort for filtering."
::= { acl6NewCfgEntry 13 }
acl6NewCfgDstPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination TCP/UDP port number to be filtered."
::= { acl6NewCfgEntry 14 }
acl6NewCfgDstPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask applied to acl6CurCfgDstPort for filtering."
::= { acl6NewCfgEntry 15 }
acl6NewCfgTCPFlags OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|--tcpSYN(6)
||||
||||-----tcpACK(3)
|||------tcpURG(2)
||-------reserved2(1)
|--------reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { acl6NewCfgEntry 16 }
acl6NewCfgTCPFlagsMask OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|--tcpSYN(6)
||||
||||-----tcpACK(3)
|||------tcpURG(2)
||-------reserved2(1)
|--------reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { acl6NewCfgEntry 17 }
acl6NewCfgStatistics OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether statistics collection for this ACL6 is enabled or not."
::= { acl6NewCfgEntry 19 }
acl6NewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to delete an ACL6 entry. A value of
other(1) is always returned when this object is read."
::= { acl6NewCfgEntry 22 }
acl6NewCfgUser OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set user defined priority for this ACL6."
::= { acl6NewCfgEntry 23 }
acl6NewCfgInprofDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set in profile pkts DSCP value."
::= { acl6NewCfgEntry 24 }
acl6NewCfgInprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether in profile update DSCP for this ACL6 is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this ACL6.
The value enable(1) is automatically set when setting a value
for aclNewCfgInprofDscp object."
::= { acl6NewCfgEntry 28 }
acl6NewCfgIPv6Reset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL IPV6 entry. A value of
other(1) is always returned when this object is read."
::= { acl6NewCfgEntry 30 }
acl6NewCfgTcpudpReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL6 Tcpudp entry. A value of
other(1) is always returned when this object is read."
::= { acl6NewCfgEntry 31 }
acl6NewCfgLog OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether log for this ACL is enabled or not."
::= { acl6NewCfgEntry 33 }
acl6NewCfgFilterActionChangeVlan OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN will be modified when the action for this ACL6 entry is
changevlan, , when this object is set to 0, the changevlan
action is disabled."
::= { acl6NewCfgEntry 34 }
acl6TableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in the acl6 config tables."
::= { acl6List 3 }
-- ---------------------------------------------------------- --
-- ACL Log Configuration
-- ---------------------------------------------------------- --
aclLogCurInterval OBJECT-TYPE
SYNTAX INTEGER (5..600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval secends of displaying Logs.
Default is 300s."
::= { aclLog 1 }
aclLogNewInterval OBJECT-TYPE
SYNTAX INTEGER (5..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval secends of displaying Logs.
Default is 300s."
::= { aclLog 2 }
aclLogCurRateLimit OBJECT-TYPE
SYNTAX INTEGER (1..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate limit of ACL Log queue.
Default is 10pps."
::= { aclLog 3 }
aclLogNewRateLimit OBJECT-TYPE
SYNTAX INTEGER (1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate limit of ACL Log queue.
Default is 10pps."
::= { aclLog 4 }
aclCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port acl groups configuration."
::= { aclCfg 1 }
aclCurCfgPortTableEntry OBJECT-TYPE
SYNTAX AclCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port acl configuration."
INDEX { aclCurCfgPortIndex }
::= { aclCurCfgPortTable 1 }
AclCurCfgPortTableEntry ::= SEQUENCE {
aclCurCfgPortIndex PortNumber,
aclCurCfgPortAclBmap OCTET STRING
, aclCurCfgPortAcl6Bmap OCTET STRING
}
aclCurCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular port. This is also
index to the entLogicalTable of Entity MIB."
::= { aclCurCfgPortTableEntry 1 }
aclCurCfgPortAclBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl 9
|| ||
|| ||___ acl 8
|| |____ acl 7
|| . . .
||_________ acl 2
|__________ acl 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port."
::= { aclCurCfgPortTableEntry 2 }
aclCurCfgPortAcl6Bmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 128.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl6 9
|| ||
|| ||___ acl6 8
|| |____ acl6 7
|| . . .
||_________ acl6 2
|__________ acl6 1
where x : 1 - The represented acl6 applied to the port.
0 - The represented acl6 not applied to the port."
::= { aclCurCfgPortTableEntry 13 }
aclNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port acl configuration."
::= { aclCfg 2 }
aclNewCfgPortTableEntry OBJECT-TYPE
SYNTAX AclNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port acl groups configuration."
INDEX { aclNewCfgPortIndex }
::= { aclNewCfgPortTable 1 }
AclNewCfgPortTableEntry ::= SEQUENCE {
aclNewCfgPortIndex PortNumber,
aclNewCfgPortAddAcl Unsigned32
, aclNewCfgPortRemoveAcl Unsigned32
, aclNewCfgPortAclBmap OCTET STRING
, aclNewCfgPortAddAcl6 Unsigned32
, aclNewCfgPortRemoveAcl6 Unsigned32
, aclNewCfgPortAcl6Bmap OCTET STRING
}
aclNewCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular port. This is also
index to the entLogicalTable of Entity MIB."
::= { aclNewCfgPortTableEntry 1 }
aclNewCfgPortAddAcl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The acl to be added to the specified port. A
'0' value is returned when read."
::= {aclNewCfgPortTableEntry 2 }
aclNewCfgPortRemoveAcl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The acl to be removed from the specified port.
A '0' value is returned when read."
::= { aclNewCfgPortTableEntry 5 }
aclNewCfgPortAclBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl 9
|| ||
|| ||___ acl 8
|| |____ acl 7
|| . . .
||_________ acl 2
|__________ acl 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port."
::= { aclNewCfgPortTableEntry 8 }
aclNewCfgPortAddAcl6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The acl6 to be added to the specified port. A
'0' value is returned when read."
::= {aclNewCfgPortTableEntry 11 }
aclNewCfgPortRemoveAcl6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The acl6 to be removed from the specified port.
A '0' value is returned when read."
::= { aclNewCfgPortTableEntry 12 }
aclNewCfgPortAcl6Bmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The acl6s applied to the port. The acl6s are
presented in bitmap format. This string displays acl number
from 1 to 128.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl6 9
|| ||
|| ||___ acl6 8
|| |____ acl6 7
|| . . .
||_________ acl6 2
|__________ acl6 1
where x : 1 - The represented acl6 applied to the port.
0 - The represented acl6 not applied to the port."
::= { aclNewCfgPortTableEntry 13 }
-- ------------------------------------------------------------------------- --
-- VMAP Configuration {
-- ------------------------------------------------------------------------- --
vmapList OBJECT IDENTIFIER ::= { vmapConfig 1 }
vmapCfg OBJECT IDENTIFIER ::= { vmapConfig 2 }
vmapVlanCfg OBJECT IDENTIFIER ::= { vmapCfg 1 }
vmapGroupCfg OBJECT IDENTIFIER ::= { vmapCfg 2 }
vmapVlanCfgNonServerPorts OBJECT IDENTIFIER ::= { vmapVlanCfg 1 }
vmapVlanCfgServerPorts OBJECT IDENTIFIER ::= { vmapVlanCfg 2 }
vmapVlanCfgAllPorts OBJECT IDENTIFIER ::= { vmapVlanCfg 3 }
vmapGroupCfgNonServerPorts OBJECT IDENTIFIER ::= { vmapGroupCfg 1 }
vmapGroupCfgServerPorts OBJECT IDENTIFIER ::= { vmapGroupCfg 2 }
vmapGroupCfgAllPorts OBJECT IDENTIFIER ::= { vmapGroupCfg 3 }
-- ------------------------------------------------------------------------- --
-- Current VMAP Configuration Table {
-- ------------------------------------------------------------------------- --
vmapCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmapCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of current VMAP configuration."
::= { vmapList 1 }
vmapCurCfgEntry OBJECT-TYPE
SYNTAX VmapCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current information about a particular VMAP configuration entry."
INDEX { vmapCurCfgIndex }
::= { vmapCurCfgTable 1 }
VmapCurCfgEntry ::= SEQUENCE {
vmapCurCfgIndex Unsigned32,
vmapCurCfgFilterAction INTEGER,
vmapCurCfgFilterActionSetPrio INTEGER,
vmapCurCfgEthFmt INTEGER,
vmapCurCfgTagFmt INTEGER,
vmapCurCfgIPFmt INTEGER,
vmapCurCfgSrcMACAddress MacAddress,
vmapCurCfgSrcMACMask MacAddress,
vmapCurCfgDstMACAddress MacAddress,
vmapCurCfgDstMACMask MacAddress,
vmapCurCfgEthernetTypeName INTEGER,
vmapCurCfgEthernetTypeValue INTEGER,
vmapCurCfg8021pPriority INTEGER,
vmapCurCfgTypeOfService DisplayString,
vmapCurCfgProtocol DisplayString,
vmapCurCfgSrcIPAddress IpAddress,
vmapCurCfgSrcIPMask IpAddress,
vmapCurCfgDstIPAddress IpAddress,
vmapCurCfgDstIPMask IpAddress,
vmapCurCfgSrcPort INTEGER,
vmapCurCfgSrcPortMask DisplayString,
vmapCurCfgDstPort INTEGER,
vmapCurCfgDstPortMask DisplayString,
vmapCurCfgTCPFlags BITS,
vmapCurCfgTCPFlagsMask BITS,
vmapCurCfgEgressPorts OCTET STRING,
vmapCurCfgStatistics INTEGER,
vmapCurCfgMeterAction INTEGER,
vmapCurCfgMeterEnable INTEGER,
vmapCurCfgKbitsSec Unsigned32,
vmapCurCfgKbitsBurst INTEGER,
vmapCurCfgUser INTEGER,
vmapCurCfgInprofDscp INTEGER,
vmapCurCfgTos INTEGER,
vmapCurCfgOutprofDscp INTEGER,
vmapCurCfgUserEnable INTEGER,
vmapCurCfgInprofDscpEnable INTEGER,
vmapCurCfgOutprofDscpEnable INTEGER
, vmapCurCfgMirrorPort Integer32
, vmapCurCfgFilterActionChangeVlan INTEGER
}
vmapCurCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with this VMAP entry."
::= { vmapCurCfgEntry 1 }
vmapCurCfgFilterAction OBJECT-TYPE
SYNTAX INTEGER {
none(0),
permit(1),
deny(2),
setprio(3)
,changevlan(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The action to be performed on a packet that matches the filter
settings of this VMAP entry."
::= { vmapCurCfgEntry 2 }
vmapCurCfgFilterActionSetPrio OBJECT-TYPE
SYNTAX INTEGER {
none(0),
prio0(1),
prio1(2),
prio2(3),
prio3(4),
prio4(5),
prio5(6),
prio6(7),
prio7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value to be used when the action to be performed is setprio
for this VMAP entry."
::= { vmapCurCfgEntry 3 }
vmapCurCfgEthFmt OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ethernet2(1),
snap(2),
llc(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet ethernet format to be filtered."
::= { vmapCurCfgEntry 4 }
vmapCurCfgTagFmt OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
any(2),
untagged(3),
tagged(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet tag format to be filtered."
::= { vmapCurCfgEntry 5 }
vmapCurCfgIPFmt OBJECT-TYPE
SYNTAX INTEGER {
none(1),
ipv4(2),
ipv6(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet IP format to be filtered."
::= { vmapCurCfgEntry 6 }
vmapCurCfgSrcMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source MAC address to be filtered."
::= { vmapCurCfgEntry 7 }
vmapCurCfgSrcMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgSrcMACAddress for filtering."
::= { vmapCurCfgEntry 8 }
vmapCurCfgDstMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination MAC address to be filtered."
::= { vmapCurCfgEntry 9 }
vmapCurCfgDstMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgDstMACAddress for filtering."
::= { vmapCurCfgEntry 10 }
vmapCurCfgEthernetTypeName OBJECT-TYPE
SYNTAX INTEGER {
none(0),
arp(1),
ipv4(2),
ipv6(3),
mpls(4),
rarp(5),
any(6),
other(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered."
::= { vmapCurCfgEntry 11 }
vmapCurCfgEthernetTypeValue OBJECT-TYPE
SYNTAX INTEGER (1536..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined value for this object."
::= { vmapCurCfgEntry 12 }
vmapCurCfg8021pPriority OBJECT-TYPE
SYNTAX INTEGER {
none(0),
priority0(1),
priority1(2),
priority2(3),
priority3(4),
priority4(5),
priority5(6),
priority6(7),
priority7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 802.1p priority to be filtered."
::= { vmapCurCfgEntry 13 }
vmapCurCfgTypeOfService OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of service to be filtered.
'none' for not initialised, within the
range 0-255"
::= { vmapCurCfgEntry 14 }
vmapCurCfgProtocol OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol to be filtered.
'none' for not initialised, within the
range 0-255"
::= { vmapCurCfgEntry 15 }
vmapCurCfgSrcIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source IP address to be filtered."
::= { vmapCurCfgEntry 16 }
vmapCurCfgSrcIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgSrcIPAddress for filtering."
::= { vmapCurCfgEntry 17 }
vmapCurCfgDstIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address to be filtered."
::= { vmapCurCfgEntry 18 }
vmapCurCfgDstIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgDstIPAddress for filtering."
::= { vmapCurCfgEntry 19 }
vmapCurCfgSrcPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source TCP/UDP port number to be filtered."
::= { vmapCurCfgEntry 20 }
vmapCurCfgSrcPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to aclCurCfgSrcPort for filtering."
::= { vmapCurCfgEntry 21 }
vmapCurCfgDstPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination TCP/UDP port number to be filtered."
::= { vmapCurCfgEntry 22 }
vmapCurCfgDstPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to aclCurCfgDstPort for filtering."
::= { vmapCurCfgEntry 23 }
vmapCurCfgTCPFlags OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|--tcpSYN(6)
||||
||||-----tcpACK(3)
|||------tcpURG(2)
||-------reserved2(1)
|--------reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { vmapCurCfgEntry 24 }
vmapCurCfgTCPFlagsMask OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|--tcpSYN(6)
||||
||||-----tcpACK(3)
|||------tcpURG(2)
||-------reserved2(1)
|--------reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { vmapCurCfgEntry 25 }
vmapCurCfgEgressPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the VMAP configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
|| ||
|| ||___ port 8
|| |____ port 7
|| . . .
||_________ port 2
|__________ port 1
where x:
1 - the represented port is configured for filtering.
0 - the represented port is not configured for filtering."
::= { vmapCurCfgEntry 26 }
vmapCurCfgStatistics OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether statistics collection for this VMAP is enabled or not."
::= { vmapCurCfgEntry 27 }
vmapCurCfgMeterAction OBJECT-TYPE
SYNTAX INTEGER {
unconfigured(0),
outdrop(1),
outpass(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Meter Action for this VMAP."
::= { vmapCurCfgEntry 31 }
vmapCurCfgMeterEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
disabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Meter state for this VMAP."
::= { vmapCurCfgEntry 32 }
vmapCurCfgKbitsSec OBJECT-TYPE
SYNTAX Unsigned32 (64..10000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The commited rate of meter associated with this VMAP entry."
::= { vmapCurCfgEntry 33 }
vmapCurCfgKbitsBurst OBJECT-TYPE
SYNTAX INTEGER {
kbits32(32),
kbits64(64),
kbits128(128),
kbits256(256),
kbits512(512),
kbits1024(1024),
kbits2048(2048),
kbits4096(4096)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maxmium burst sizeof meter associated with this VMAP entry."
::= { vmapCurCfgEntry 34 }
vmapCurCfgUser OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set user defined priority for this VMAP."
::= { vmapCurCfgEntry 35 }
vmapCurCfgInprofDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set in profile pkts DSCP value."
::= { vmapCurCfgEntry 36 }
vmapCurCfgTos OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To enable/disable setting pkts based on TOS bits."
::= { vmapCurCfgEntry 37 }
vmapCurCfgOutprofDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set out profile pkts DSCP value."
::= { vmapCurCfgEntry 38 }
vmapCurCfgUserEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
userdefined(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set update method for this VMAP."
::= { vmapCurCfgEntry 39 }
vmapCurCfgInprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether in profile update DSCP for this VMAP is enabled or not."
::= { vmapCurCfgEntry 40 }
vmapCurCfgOutprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether out profile update DSCP for this VMAP is enabled or not."
::= { vmapCurCfgEntry 41 }
vmapCurCfgMirrorPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set port in the VMAP for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring."
::= { vmapCurCfgEntry 51 }
vmapCurCfgFilterActionChangeVlan OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The classified VLAN only if the action is set as changevlan"
::= { vmapCurCfgEntry 52 }
-- ------------------------------------------------------------------------- --
-- Current VMAP Configuration Table (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- New VMAP Configuration Table {
-- ------------------------------------------------------------------------- --
vmapNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmapNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of new VMAP configuration."
::= { vmapList 2 }
vmapNewCfgEntry OBJECT-TYPE
SYNTAX VmapNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"New information about a particular VMAP configuration."
INDEX { vmapNewCfgIndex }
::= { vmapNewCfgTable 1 }
VmapNewCfgEntry ::= SEQUENCE {
vmapNewCfgIndex Unsigned32,
vmapNewCfgFilterAction INTEGER,
vmapNewCfgFilterActionSetPrio INTEGER,
vmapNewCfgEthFmt INTEGER,
vmapNewCfgTagFmt INTEGER,
vmapNewCfgIPFmt INTEGER,
vmapNewCfgSrcMACAddress MacAddress,
vmapNewCfgSrcMACMask MacAddress,
vmapNewCfgDstMACAddress MacAddress,
vmapNewCfgDstMACMask MacAddress,
vmapNewCfgEthernetTypeName INTEGER,
vmapNewCfgEthernetTypeValue INTEGER,
vmapNewCfg8021pPriority INTEGER,
vmapNewCfgTypeOfService DisplayString,
vmapNewCfgProtocol DisplayString,
vmapNewCfgSrcIPAddress IpAddress,
vmapNewCfgSrcIPMask IpAddress,
vmapNewCfgDstIPAddress IpAddress,
vmapNewCfgDstIPMask IpAddress,
vmapNewCfgSrcPort INTEGER,
vmapNewCfgSrcPortMask DisplayString,
vmapNewCfgDstPort INTEGER,
vmapNewCfgDstPortMask DisplayString,
vmapNewCfgTCPFlags BITS,
vmapNewCfgTCPFlagsMask BITS,
vmapNewCfgEgressPorts OCTET STRING,
vmapNewCfgStatistics INTEGER,
vmapNewCfgAddEgressPort PortNumber,
vmapNewCfgRemoveEgressPort PortNumber,
vmapNewCfgDelete INTEGER,
vmapNewCfgMeterAction INTEGER,
vmapNewCfgMeterEnable INTEGER,
vmapNewCfgKbitsSec Unsigned32,
vmapNewCfgKbitsBurst INTEGER,
vmapNewCfgUser INTEGER,
vmapNewCfgInprofDscp INTEGER,
vmapNewCfgTos INTEGER,
vmapNewCfgOutprofDscp INTEGER,
vmapNewCfgUserEnable INTEGER,
vmapNewCfgInprofDscpEnable INTEGER,
vmapNewCfgOutprofDscpEnable INTEGER,
vmapNewCfgReset INTEGER
, vmapNewCfgEthernetReset INTEGER
, vmapNewCfgIpv4Reset INTEGER
, vmapNewCfgTcpudpReset INTEGER
, vmapNewCfgMeterReset INTEGER
, vmapNewCfgRemarkReset INTEGER
, vmapNewCfgRemarkInprofReset INTEGER
, vmapNewCfgRemarkOutprofReset INTEGER
, vmapNewCfgPktfmtReset INTEGER
, vmapNewCfgMirrorPort Integer32
, vmapNewCfgFilterActionChangeVlan INTEGER
}
vmapNewCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with this VMAP entry."
::= { vmapNewCfgEntry 1 }
vmapNewCfgFilterAction OBJECT-TYPE
SYNTAX INTEGER {
none(0),
permit(1),
deny(2),
setprio(3)
,changevlan(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to be performed on a packet that matches the filter
settings of this VMAP entry."
::= { vmapNewCfgEntry 2 }
vmapNewCfgFilterActionSetPrio OBJECT-TYPE
SYNTAX INTEGER {
none(0),
prio0(1),
prio1(2),
prio2(3),
prio3(4),
prio4(5),
prio5(6),
prio6(7),
prio7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The COS queue to be used when the action for this VMAP entry is
set to setprio."
::= { vmapNewCfgEntry 3 }
vmapNewCfgEthFmt OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ethernet2(1),
snap(2),
llc(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The packet ethernet format to be filtered."
::= { vmapNewCfgEntry 4 }
vmapNewCfgTagFmt OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
any(2),
none(3),
tagged(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The packet tagging format to be filtered."
::= { vmapNewCfgEntry 5 }
vmapNewCfgIPFmt OBJECT-TYPE
SYNTAX INTEGER {
none(1),
ipv4(2),
ipv6(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The packet IP format to be filtered."
::= { vmapNewCfgEntry 6 }
vmapNewCfgSrcMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff."
::= { vmapNewCfgEntry 7 }
vmapNewCfgSrcMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgSrcMACAddress
for filtering."
::= { vmapNewCfgEntry 8 }
vmapNewCfgDstMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff."
::= { vmapNewCfgEntry 9 }
vmapNewCfgDstMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgDstMACAddress
for filtering."
::= { vmapNewCfgEntry 10 }
vmapNewCfgEthernetTypeName OBJECT-TYPE
SYNTAX INTEGER {
none(0),
arp(1),
ipv4(2),
ipv6(3),
mpls(4),
rarp(5),
any(6),
other(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7), the value of
the aclNewCfgEthernetTypeValue object is automatically set,
as follows:
aclNewCfgEthernetTypeName aclNewCfgEthernetTypeValue
none(0) 0
arp(1) 2054 (0x0806)
ipv4(2) 2048 (0x0800)
ipv6(3) 34525 (0x86dd)
mpls(4) 34887 (0x8847)
rarp(5) 32821 (0x8035)
any(6) 65535 (0xffff)
"
::= { vmapNewCfgEntry 11 }
vmapNewCfgEthernetTypeValue OBJECT-TYPE
SYNTAX INTEGER (1536..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined value for this object."
::= { vmapNewCfgEntry 12 }
vmapNewCfg8021pPriority OBJECT-TYPE
SYNTAX INTEGER {
none(0),
priority0(1),
priority1(2),
priority2(3),
priority3(4),
priority4(5),
priority5(6),
priority6(7),
priority7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 802.1p priority to be filtered."
::= { vmapNewCfgEntry 13 }
vmapNewCfgTypeOfService OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of service to be filtered.
'none' for not initialised, within the
range 0-255"
::= { vmapNewCfgEntry 14 }
vmapNewCfgProtocol OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol to be filtered.
'none' for not initialised, within the
range 0-255"
::= { vmapNewCfgEntry 15 }
vmapNewCfgSrcIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255."
::= { vmapNewCfgEntry 16 }
vmapNewCfgSrcIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgSrcIPAddress
for filtering."
::= { vmapNewCfgEntry 17 }
vmapNewCfgDstIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.255."
::= { vmapNewCfgEntry 18 }
vmapNewCfgDstIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgDstIPAddress for filtering."
::= { vmapNewCfgEntry 19 }
vmapNewCfgSrcPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff)."
::= { vmapNewCfgEntry 20 }
vmapNewCfgSrcPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask to be applied to aclNewCfgSrcPort for filtering."
::= { vmapNewCfgEntry 21 }
vmapNewCfgDstPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff)."
::= { vmapNewCfgEntry 22 }
vmapNewCfgDstPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask to be applied to aclNewCfgDstPort for filtering."
::= { vmapNewCfgEntry 23 }
vmapNewCfgTCPFlags OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP flags to be filtered.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|--tcpSYN(6)
||||
||||-----tcpACK(3)
|||------tcpURG(2)
||-------reserved2(1)
|--------reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { vmapNewCfgEntry 24 }
vmapNewCfgTCPFlagsMask OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP flags mask.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|--tcpSYN(6)
||||
||||-----tcpACK(3)
|||------tcpURG(2)
||-------reserved2(1)
|--------reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
Default value is 0x3f."
::= { vmapNewCfgEntry 25 }
vmapNewCfgEgressPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the VMAP configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
|| ||
|| ||___ port 8
|| |____ port 7
|| . . .
||_________ port 2
|__________ port 1
where x:
1 - the represented port is configured for filtering.
0 - the represented port is not configured for filtering."
::= { vmapNewCfgEntry 26 }
vmapNewCfgStatistics OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether statistics collection for this VMAP is enabled or not."
::= { vmapNewCfgEntry 27 }
vmapNewCfgAddEgressPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be added to the specified VMAP for egress filtering.
A value of zero is always returned when this object is read."
::= { vmapNewCfgEntry 28 }
vmapNewCfgRemoveEgressPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be removed from the specified VMAP. A value of zero
is always returned when this object is read."
::= { vmapNewCfgEntry 29 }
vmapNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to delete an VMAP entry. A value of
other(1) is always returned when this object is read."
::= { vmapNewCfgEntry 30 }
vmapNewCfgMeterAction OBJECT-TYPE
SYNTAX INTEGER {
unconfigured(0),
outdrop(1),
outpass(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Meter Action for this VMAP."
::= { vmapNewCfgEntry 31 }
vmapNewCfgMeterEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
disabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Meter state for this VMAP."
::= { vmapNewCfgEntry 32 }
vmapNewCfgKbitsSec OBJECT-TYPE
SYNTAX Unsigned32 (64..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The commited rate of meter associated with this VMAP entry."
::= { vmapNewCfgEntry 33 }
vmapNewCfgKbitsBurst OBJECT-TYPE
SYNTAX INTEGER {
kbits32(32),
kbits64(64),
kbits128(128),
kbits256(256),
kbits512(512),
kbits1024(1024),
kbits2048(2048),
kbits4096(4096)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum burst size of the meter associated with this VMAP entry."
::= { vmapNewCfgEntry 34 }
vmapNewCfgUser OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set user defined priority for this VMAP."
::= { vmapNewCfgEntry 35 }
vmapNewCfgInprofDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set in profile pkts DSCP value."
::= { vmapNewCfgEntry 36 }
vmapNewCfgTos OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable/disable setting pkts based on TOS bits."
::= { vmapNewCfgEntry 37 }
vmapNewCfgOutprofDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set out profile pkts DSCP value."
::= { vmapNewCfgEntry 38 }
vmapNewCfgUserEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
userdefined(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set update method for this VMAP."
::= { vmapNewCfgEntry 39 }
vmapNewCfgInprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether in profile update DSCP for this VMAP is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this VMAP.
The value enable(1) is automatically set when setting a value
for aclNewCfgInprofDscp object."
::= { vmapNewCfgEntry 40 }
vmapNewCfgOutprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether out profile update DSCP for this VMAP is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this VMAP.
The value enable(1) is automatically set when setting a value
for aclNewCfgOutprofDscp object."
::= { vmapNewCfgEntry 41 }
vmapNewCfgReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an VMAP entry. A value of
other(1) is always returned when this object is read."
::= { vmapNewCfgEntry 42 }
vmapNewCfgEthernetReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an VMAP Ethernet entry. A value of
other(1) is always returned when this object is read."
::= { vmapNewCfgEntry 43 }
vmapNewCfgIpv4Reset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an VMAP IPV4 entry. A value of
other(1) is always returned when this object is read."
::= { vmapNewCfgEntry 44 }
vmapNewCfgTcpudpReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an VMAP Tcpudp entry. A value of
other(1) is always returned when this object is read."
::= { vmapNewCfgEntry 45 }
vmapNewCfgMeterReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an VMAP Meter entry. A value of
other(1) is always returned when this object is read."
::= { vmapNewCfgEntry 46 }
vmapNewCfgRemarkReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an VMAP Remark entry. A value of
other(1) is always returned when this object is read."
::= { vmapNewCfgEntry 47 }
vmapNewCfgRemarkInprofReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an VMAP Remark Inprof entry. A value of
other(1) is always returned when this object is read."
::= { vmapNewCfgEntry 48 }
vmapNewCfgRemarkOutprofReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an VMAP Remark Outprof entry. A value of
other(1) is always returned when this object is read."
::= { vmapNewCfgEntry 49 }
vmapNewCfgPktfmtReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an VMAP Pktfmt entry. A value of
other(1) is always returned when this object is read."
::= { vmapNewCfgEntry 50 }
vmapNewCfgMirrorPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set port in the VMAP for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring."
::= { vmapNewCfgEntry 51 }
vmapNewCfgFilterActionChangeVlan OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN will be modified when the action for this VMAP entry is
changevlan, , when this object is set to 0, the changevlan
action is disabled."
::= { vmapNewCfgEntry 52 }
-- ------------------------------------------------------------------------- --
-- New VMAP Configuration Table (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- Current VLAN VMAP Non-Server Ports Configuration Table {
-- ------------------------------------------------------------------------- --
vmapVlanCurCfgNonServerPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmapVlanCurCfgNonServerPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of the current configuration
of vmaps for the non-server ports of vlans."
::= { vmapVlanCfgNonServerPorts 1 }
vmapVlanCurCfgNonServerPortsTableEntry OBJECT-TYPE
SYNTAX VmapVlanCurCfgNonServerPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table of current configuration
of vmaps for the non-server ports of vlans."
INDEX { vmapVlanCurCfgNonServerPortsVlanIdx }
::= { vmapVlanCurCfgNonServerPortsTable 1 }
VmapVlanCurCfgNonServerPortsTableEntry ::= SEQUENCE {
vmapVlanCurCfgNonServerPortsVlanIdx Integer32,
vmapVlanCurCfgNonServerPortsVmapBitmap OCTET STRING
}
vmapVlanCurCfgNonServerPortsVlanIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan id in the table of configured
vmaps for the non-server ports of vlan"
::= { vmapVlanCurCfgNonServerPortsTableEntry 1 }
vmapVlanCurCfgNonServerPortsVmapBitmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap of vmaps configured for the non-server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context"
::= { vmapVlanCurCfgNonServerPortsTableEntry 2 }
-- ------------------------------------------------------------------------- --
-- Current VLAN VMAP Non-Server Ports Configuration Table (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- New VLAN VMAP Non Server Ports Configuration Table {
-- ------------------------------------------------------------------------- --
vmapVlanNewCfgNonServerPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmapVlanNewCfgNonServerPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of the new configuration
of vmaps for non-server ports of vlans."
::= { vmapVlanCfgNonServerPorts 2 }
vmapVlanNewCfgNonServerPortsTableEntry OBJECT-TYPE
SYNTAX VmapVlanNewCfgNonServerPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table of new configuration
of vmaps for the non-server ports of vlans."
INDEX { vmapVlanNewCfgNonServerPortsVlanIdx }
::= { vmapVlanNewCfgNonServerPortsTable 1 }
VmapVlanNewCfgNonServerPortsTableEntry ::= SEQUENCE {
vmapVlanNewCfgNonServerPortsVlanIdx Integer32,
vmapVlanNewCfgNonServerPortsVmapBitmap OCTET STRING,
vmapVlanNewCfgNonServerPortsAddVmap Unsigned32,
vmapVlanNewCfgNonServerPortsRemVmap Unsigned32
}
vmapVlanNewCfgNonServerPortsVlanIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan id in the table of configured
vmaps for the non-server ports of vlan"
::= { vmapVlanNewCfgNonServerPortsTableEntry 1 }
vmapVlanNewCfgNonServerPortsVmapBitmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap of vmaps configured for the non-server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context"
::= { vmapVlanNewCfgNonServerPortsTableEntry 2 }
vmapVlanNewCfgNonServerPortsAddVmap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add a new vmap to the non-server ports of the vlan"
::= { vmapVlanNewCfgNonServerPortsTableEntry 3 }
vmapVlanNewCfgNonServerPortsRemVmap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove a vmap from the non-server ports of the vlan"
::= { vmapVlanNewCfgNonServerPortsTableEntry 4 }
-- ------------------------------------------------------------------------- --
-- New VLAN VMAP Non-server Ports Configuration Table (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- Current VLAN VMAP Internal Ports Configuration Table {
-- ------------------------------------------------------------------------- --
vmapVlanCurCfgServerPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmapVlanCurCfgServerPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of the current configuration
of vmaps for server ports of vlans."
::= { vmapVlanCfgServerPorts 1 }
vmapVlanCurCfgServerPortsTableEntry OBJECT-TYPE
SYNTAX VmapVlanCurCfgServerPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table of current configuration
of vmaps for the server ports of vlans."
INDEX { vmapVlanCurCfgServerPortsVlanIdx }
::= { vmapVlanCurCfgServerPortsTable 1 }
VmapVlanCurCfgServerPortsTableEntry ::= SEQUENCE {
vmapVlanCurCfgServerPortsVlanIdx Integer32,
vmapVlanCurCfgServerPortsVmapBitmap OCTET STRING
}
vmapVlanCurCfgServerPortsVlanIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan id in the table of configured
vmaps for the server ports of vlan"
::= { vmapVlanCurCfgServerPortsTableEntry 1 }
vmapVlanCurCfgServerPortsVmapBitmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap of vmaps configured for the server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context"
::= { vmapVlanCurCfgServerPortsTableEntry 2 }
-- ------------------------------------------------------------------------- --
-- Current VLAN VMAP Server Ports Configuration Table (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- New VLAN VMAP Server Ports Configuration Table {
-- ------------------------------------------------------------------------- --
vmapVlanNewCfgServerPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmapVlanNewCfgServerPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of the new configuration
of vmaps for server ports of vlans."
::= { vmapVlanCfgServerPorts 2 }
vmapVlanNewCfgServerPortsTableEntry OBJECT-TYPE
SYNTAX VmapVlanNewCfgServerPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table of new configuration
of vmaps for the server ports of vlans."
INDEX { vmapVlanNewCfgServerPortsVlanIdx }
::= { vmapVlanNewCfgServerPortsTable 1 }
VmapVlanNewCfgServerPortsTableEntry ::= SEQUENCE {
vmapVlanNewCfgServerPortsVlanIdx Integer32,
vmapVlanNewCfgServerPortsVmapBitmap OCTET STRING,
vmapVlanNewCfgServerPortsAddVmap Unsigned32,
vmapVlanNewCfgServerPortsRemVmap Unsigned32
}
vmapVlanNewCfgServerPortsVlanIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan id in the table of configured
vmaps for the server ports of vlan"
::= { vmapVlanNewCfgServerPortsTableEntry 1 }
vmapVlanNewCfgServerPortsVmapBitmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap of vmaps configured for the server
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context"
::= { vmapVlanNewCfgServerPortsTableEntry 2 }
vmapVlanNewCfgServerPortsAddVmap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add a new vmap to the server ports of the vlan"
::= { vmapVlanNewCfgServerPortsTableEntry 3 }
vmapVlanNewCfgServerPortsRemVmap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove a vmap from the server ports of the vlan"
::= { vmapVlanNewCfgServerPortsTableEntry 4 }
-- ------------------------------------------------------------------------- --
-- New VLAN VMAP Server Ports Configuration Table (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- Current VLAN VMAP All Ports Configuration Table {
-- ------------------------------------------------------------------------- --
vmapVlanCurCfgAllPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmapVlanCurCfgAllPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of the current configuration
of vmaps for all ports of vlans."
::= { vmapVlanCfgAllPorts 1 }
vmapVlanCurCfgAllPortsTableEntry OBJECT-TYPE
SYNTAX VmapVlanCurCfgAllPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table of current configuration
of vmaps for all ports of vlans."
INDEX { vmapVlanCurCfgAllPortsVlanIdx }
::= { vmapVlanCurCfgAllPortsTable 1 }
VmapVlanCurCfgAllPortsTableEntry ::= SEQUENCE {
vmapVlanCurCfgAllPortsVlanIdx Integer32,
vmapVlanCurCfgAllPortsVmapBitmap OCTET STRING
}
vmapVlanCurCfgAllPortsVlanIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan id in the table of configured
vmaps for all ports of vlan"
::= { vmapVlanCurCfgAllPortsTableEntry 1 }
vmapVlanCurCfgAllPortsVmapBitmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap of vmaps configured for the internal
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context"
::= { vmapVlanCurCfgAllPortsTableEntry 2 }
-- ------------------------------------------------------------------------- --
-- Current VLAN VMAP All Ports Configuration Table (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- New VLAN VMAP All Ports Configuration Table {
-- ------------------------------------------------------------------------- --
vmapVlanNewCfgAllPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmapVlanNewCfgAllPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of the new configuration
of vmaps for all ports of vlans."
::= { vmapVlanCfgAllPorts 2 }
vmapVlanNewCfgAllPortsTableEntry OBJECT-TYPE
SYNTAX VmapVlanNewCfgAllPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table of new configuration
of vmaps for all ports of vlans."
INDEX { vmapVlanNewCfgAllPortsVlanIdx }
::= { vmapVlanNewCfgAllPortsTable 1 }
VmapVlanNewCfgAllPortsTableEntry ::= SEQUENCE {
vmapVlanNewCfgAllPortsVlanIdx Integer32,
vmapVlanNewCfgAllPortsVmapBitmap OCTET STRING,
vmapVlanNewCfgAllPortsAddVmap Unsigned32,
vmapVlanNewCfgAllPortsRemVmap Unsigned32
}
vmapVlanNewCfgAllPortsVlanIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan id in the table of configured
vmaps for all ports of vlan"
::= { vmapVlanNewCfgAllPortsTableEntry 1 }
vmapVlanNewCfgAllPortsVmapBitmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap of vmaps configured for the internal
ports of the vlan given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context"
::= { vmapVlanNewCfgAllPortsTableEntry 2 }
vmapVlanNewCfgAllPortsAddVmap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add a new vmap to all ports of the vlan"
::= { vmapVlanNewCfgAllPortsTableEntry 3 }
vmapVlanNewCfgAllPortsRemVmap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove a vmap from all vlan ports"
::= { vmapVlanNewCfgAllPortsTableEntry 4 }
-- ------------------------------------------------------------------------- --
-- New VLAN VMAP All Ports Configuration Table (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- Current GROUP VMAP Non-server Ports Configuration Table {
-- ------------------------------------------------------------------------- --
vmapGroupCurCfgNonServerPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmapGroupCurCfgNonServerPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of the current configuration
of vmaps for non-server ports of vm groups."
::= { vmapGroupCfgNonServerPorts 1 }
vmapGroupCurCfgNonServerPortsTableEntry OBJECT-TYPE
SYNTAX VmapGroupCurCfgNonServerPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table of current configuration
of vmaps for the non-server ports of vm groups."
INDEX { vmapGroupCurCfgNonServerPortsGroupIdx }
::= { vmapGroupCurCfgNonServerPortsTable 1 }
VmapGroupCurCfgNonServerPortsTableEntry ::= SEQUENCE {
vmapGroupCurCfgNonServerPortsGroupIdx Integer32,
vmapGroupCurCfgNonServerPortsVmapBitmap OCTET STRING
}
vmapGroupCurCfgNonServerPortsGroupIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vm group id in the table of configured
vmaps for the non-server ports of vm group"
::= { vmapGroupCurCfgNonServerPortsTableEntry 1 }
vmapGroupCurCfgNonServerPortsVmapBitmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap of vmaps configured for the non-server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context"
::= { vmapGroupCurCfgNonServerPortsTableEntry 2 }
-- ------------------------------------------------------------------------- --
-- Current GROUP VMAP NonServerernal Ports Configuration Table (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- New GROUP VMAP NonServerernal Ports Configuration Table {
-- ------------------------------------------------------------------------- --
vmapGroupNewCfgNonServerPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmapGroupNewCfgNonServerPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of the new configuration
of vmaps for non-server ports of vm groups."
::= { vmapGroupCfgNonServerPorts 2 }
vmapGroupNewCfgNonServerPortsTableEntry OBJECT-TYPE
SYNTAX VmapGroupNewCfgNonServerPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table of new configuration
of vmaps for the non-server ports of vm groups."
INDEX { vmapGroupNewCfgNonServerPortsGroupIdx }
::= { vmapGroupNewCfgNonServerPortsTable 1 }
VmapGroupNewCfgNonServerPortsTableEntry ::= SEQUENCE {
vmapGroupNewCfgNonServerPortsGroupIdx Integer32,
vmapGroupNewCfgNonServerPortsVmapBitmap OCTET STRING,
vmapGroupNewCfgNonServerPortsAddVmap Unsigned32,
vmapGroupNewCfgNonServerPortsRemVmap Unsigned32
}
vmapGroupNewCfgNonServerPortsGroupIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vm group id in the table of configured
vmaps for the non-server ports of vm group"
::= { vmapGroupNewCfgNonServerPortsTableEntry 1 }
vmapGroupNewCfgNonServerPortsVmapBitmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap of vmaps configured for the non-server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context"
::= { vmapGroupNewCfgNonServerPortsTableEntry 2 }
vmapGroupNewCfgNonServerPortsAddVmap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add a new vmap to the non-server ports of the vm group"
::= { vmapGroupNewCfgNonServerPortsTableEntry 3 }
vmapGroupNewCfgNonServerPortsRemVmap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove a vmap from the non-server ports of the vm group"
::= { vmapGroupNewCfgNonServerPortsTableEntry 4 }
-- ------------------------------------------------------------------------- --
-- New GROUP VMAP External Ports Configuration Table (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- Current GROUP VMAP Server Ports Configuration Table {
-- ------------------------------------------------------------------------- --
vmapGroupCurCfgServerPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmapGroupCurCfgServerPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of the current configuration
of vmaps for server ports of vm groups."
::= { vmapGroupCfgServerPorts 1 }
vmapGroupCurCfgServerPortsTableEntry OBJECT-TYPE
SYNTAX VmapGroupCurCfgServerPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table of current configuration
of vmaps for the server ports of vm groups."
INDEX { vmapGroupCurCfgServerPortsGroupIdx }
::= { vmapGroupCurCfgServerPortsTable 1 }
VmapGroupCurCfgServerPortsTableEntry ::= SEQUENCE {
vmapGroupCurCfgServerPortsGroupIdx Integer32,
vmapGroupCurCfgServerPortsVmapBitmap OCTET STRING
}
vmapGroupCurCfgServerPortsGroupIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vm group id in the table of configured
vmaps for the server ports of vm group"
::= { vmapGroupCurCfgServerPortsTableEntry 1 }
vmapGroupCurCfgServerPortsVmapBitmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap of vmaps configured for the server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context"
::= { vmapGroupCurCfgServerPortsTableEntry 2 }
-- ------------------------------------------------------------------------- --
-- Current GROUP VMAP Server Ports Configuration Table (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- New GROUP VMAP Server Ports Configuration Table {
-- ------------------------------------------------------------------------- --
vmapGroupNewCfgServerPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmapGroupNewCfgServerPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of the new configuration
of vmaps for server ports of vm groups."
::= { vmapGroupCfgServerPorts 2 }
vmapGroupNewCfgServerPortsTableEntry OBJECT-TYPE
SYNTAX VmapGroupNewCfgServerPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table of new configuration
of vmaps for the server ports of vm groups."
INDEX { vmapGroupNewCfgServerPortsGroupIdx }
::= { vmapGroupNewCfgServerPortsTable 1 }
VmapGroupNewCfgServerPortsTableEntry ::= SEQUENCE {
vmapGroupNewCfgServerPortsGroupIdx Integer32,
vmapGroupNewCfgServerPortsVmapBitmap OCTET STRING,
vmapGroupNewCfgServerPortsAddVmap Unsigned32,
vmapGroupNewCfgServerPortsRemVmap Unsigned32
}
vmapGroupNewCfgServerPortsGroupIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vm group id in the table of configured
vmaps for the server ports of vm group"
::= { vmapGroupNewCfgServerPortsTableEntry 1 }
vmapGroupNewCfgServerPortsVmapBitmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap of vmaps configured for the server
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context"
::= { vmapGroupNewCfgServerPortsTableEntry 2 }
vmapGroupNewCfgServerPortsAddVmap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add a new vmap to the server ports of the vm group"
::= { vmapGroupNewCfgServerPortsTableEntry 3 }
vmapGroupNewCfgServerPortsRemVmap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove a vmap from the server ports of the vm group"
::= { vmapGroupNewCfgServerPortsTableEntry 4 }
-- ------------------------------------------------------------------------- --
-- New GROUP VMAP Server Ports Configuration Table (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- Current GROUP VMAP All Ports Configuration Table {
-- ------------------------------------------------------------------------- --
vmapGroupCurCfgAllPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmapGroupCurCfgAllPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of the current configuration
of vmaps for all ports of vm groups."
::= { vmapGroupCfgAllPorts 1 }
vmapGroupCurCfgAllPortsTableEntry OBJECT-TYPE
SYNTAX VmapGroupCurCfgAllPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table of current configuration
of vmaps for all ports of vm groups."
INDEX { vmapGroupCurCfgAllPortsGroupIdx }
::= { vmapGroupCurCfgAllPortsTable 1 }
VmapGroupCurCfgAllPortsTableEntry ::= SEQUENCE {
vmapGroupCurCfgAllPortsGroupIdx Integer32,
vmapGroupCurCfgAllPortsVmapBitmap OCTET STRING
}
vmapGroupCurCfgAllPortsGroupIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vm group id in the table of configured
vmaps for all ports of vm group"
::= { vmapGroupCurCfgAllPortsTableEntry 1 }
vmapGroupCurCfgAllPortsVmapBitmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap of vmaps configured for the internal
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context"
::= { vmapGroupCurCfgAllPortsTableEntry 2 }
-- ------------------------------------------------------------------------- --
-- Current GROUP VMAP All Ports Configuration Table (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- New GROUP VMAP All Ports Configuration Table {
-- ------------------------------------------------------------------------- --
vmapGroupNewCfgAllPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmapGroupNewCfgAllPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of the new configuration
of vmaps for all ports of vm groups."
::= { vmapGroupCfgAllPorts 2 }
vmapGroupNewCfgAllPortsTableEntry OBJECT-TYPE
SYNTAX VmapGroupNewCfgAllPortsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table of new configuration
of vmaps for all ports of vm groups."
INDEX { vmapGroupNewCfgAllPortsGroupIdx }
::= { vmapGroupNewCfgAllPortsTable 1 }
VmapGroupNewCfgAllPortsTableEntry ::= SEQUENCE {
vmapGroupNewCfgAllPortsGroupIdx Integer32,
vmapGroupNewCfgAllPortsVmapBitmap OCTET STRING,
vmapGroupNewCfgAllPortsAddVmap Unsigned32,
vmapGroupNewCfgAllPortsRemVmap Unsigned32
}
vmapGroupNewCfgAllPortsGroupIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vm group id in the table of configured
vmaps for all ports of vm group"
::= { vmapGroupNewCfgAllPortsTableEntry 1 }
vmapGroupNewCfgAllPortsVmapBitmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bitmap of vmaps configured for the internal
ports of the vm group given as arguments.
The vmaps are presented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vmap 9
|| ||
|| ||___ vmap 8
|| |____ vmap 7
|| . . .
||_________ vmap 2
|__________ vmap 1
where x : 1 - The represented vmap is active in
the specified context
0 - The represented vmap is NOT active
in the specified context"
::= { vmapGroupNewCfgAllPortsTableEntry 2 }
vmapGroupNewCfgAllPortsAddVmap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add a new vmap to all ports of the vm group"
::= { vmapGroupNewCfgAllPortsTableEntry 3 }
vmapGroupNewCfgAllPortsRemVmap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove a vmap from all vm group ports"
::= { vmapGroupNewCfgAllPortsTableEntry 4 }
-- ------------------------------------------------------------------------- --
-- New GROUP VMAP All Ports Configuration Table (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- VMAP Configuration (end) }
-- ------------------------------------------------------------------------- --
-- ----------------------------------------------------------------------------
-- } INSERT: acl
-- ----------------------------------------------------------------------------
cee OBJECT IDENTIFIER ::= { g8124-mgmt 13 }
-- ----------------------------------------------------------------------------
-- { INSERT: cee
-- ----------------------------------------------------------------------------
ceeConfig OBJECT IDENTIFIER ::= { cee 1 }
-- General Configuration for CEE
ceeCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CEE is currently on or off."
::= { ceeConfig 1 }
ceeNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Turn CEE on or off."
::= { ceeConfig 2 }
fcoe OBJECT IDENTIFIER ::= { g8124-mgmt 14 }
-- ----------------------------------------------------------------------------
-- { INSERT: fcoe
-- ----------------------------------------------------------------------------
fcoeConfig OBJECT IDENTIFIER ::= { fcoe 1 }
fcoeStats OBJECT IDENTIFIER ::= { fcoe 2 }
fcoeInfo OBJECT IDENTIFIER ::= { fcoe 3 }
fcoeOper OBJECT IDENTIFIER ::= { fcoe 4 }
fipsCfg OBJECT IDENTIFIER ::= { fcoeConfig 3 }
fipsInfo OBJECT IDENTIFIER ::= { fcoeInfo 1 }
fipsOper OBJECT IDENTIFIER ::= { fcoeOper 1 }
fipsInfoFcf OBJECT IDENTIFIER ::= { fipsInfo 2 }
fipsInfoFcoe OBJECT IDENTIFIER ::= { fipsInfo 3 }
fipsInfoVlans OBJECT IDENTIFIER ::= { fipsInfo 4 }
-- General Configuration for fcoe
fipsCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FIP snooping is currently on or off."
::= { fipsCfg 1 }
fipsNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Turn FIP snooping on or off."
::= { fipsCfg 2 }
fipsCurAclTimeout OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The removal of acls when FCF and FCOE connections timed out is enabled or disabled."
::= { fipsCfg 3 }
fipsNewAclTimeout OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the removal of acls when FCF and FCOE connections timed out."
::= { fipsCfg 4 }
fipsCurAutoVlan OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The automatic creation of FCOE vlans is enabled or disabled."
::= { fipsCfg 5 }
fipsNewAutoVlan OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable the automatic creation of FCOE vlans."
::= { fipsCfg 6 }
-- FIPS current config table
fipsPortCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF FipsPortCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FIP Snooping port current config."
::= { fipsCfg 7 }
fipsPortCurCfgEntry OBJECT-TYPE
SYNTAX FipsPortCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"FIP Config for a particular port."
INDEX { fipsPortCurCfgIndex }
::= { fipsPortCurCfgTable 1 }
FipsPortCurCfgEntry ::= SEQUENCE {
fipsPortCurCfgIndex PortNumber,
fipsPortCurCfgFcfMode INTEGER,
fipsPortCurCfgFipsEna INTEGER
}
fipsPortCurCfgIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number"
::= { fipsPortCurCfgEntry 1 }
fipsPortCurCfgFcfMode OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Weither the port is set to have FCF auto detection, on, or off."
::= { fipsPortCurCfgEntry 2 }
fipsPortCurCfgFipsEna OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FIP snooping enabled or disabled on this port."
::= { fipsPortCurCfgEntry 3 }
-- FIPS new config table
fipsPortNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF FipsPortNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FIP Snooping port new config."
::= { fipsCfg 8 }
fipsPortNewCfgEntry OBJECT-TYPE
SYNTAX FipsPortNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"FIP Config for a particular port."
INDEX { fipsPortNewCfgIndex }
::= { fipsPortNewCfgTable 1 }
FipsPortNewCfgEntry ::= SEQUENCE {
fipsPortNewCfgIndex PortNumber,
fipsPortNewCfgFcfMode INTEGER,
fipsPortNewCfgFipsEna INTEGER
}
fipsPortNewCfgIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number"
::= { fipsPortNewCfgEntry 1 }
fipsPortNewCfgFcfMode OBJECT-TYPE
SYNTAX INTEGER {
auto(0),
on(1),
off(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set this port to have FCF on, off, or auto detection."
::= { fipsPortNewCfgEntry 2 }
fipsPortNewCfgFipsEna OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable FIP snooping on this port."
::= { fipsPortNewCfgEntry 3 }
-- fips Information Table
fipsInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF FipsInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of fips port run-time information."
::= { fipsInfo 1 }
fipsInfoPortEntry OBJECT-TYPE
SYNTAX FipsInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A port in the fips information table."
INDEX { fipsInfoPortIndex, fipsInfoAclSequencer}
::= { fipsInfoPortTable 1 }
FipsInfoPortEntry ::= SEQUENCE {
fipsInfoPortIndex PortNumber,
fipsInfoAclSequencer Integer32,
fipsInfoAcl DisplayString
}
fipsInfoPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index for fips"
::= { fipsInfoPortEntry 1 }
fipsInfoAclSequencer OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fip sequence number for an acl in this port"
::= { fipsInfoPortEntry 2 }
fipsInfoAcl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An FIPS ACL entry"
::= { fipsInfoPortEntry 3 }
-- info fcf detected
fipsInfoFcfCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of FCFs detected"
::= { fipsInfoFcf 1 }
fipsInfoFcfTable OBJECT-TYPE
SYNTAX SEQUENCE OF FipsInfoFcfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of fips FCF detected."
::= { fipsInfoFcf 2 }
fipsInfoFcfEntry OBJECT-TYPE
SYNTAX FipsInfoFcfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A FCF in the fips information table."
INDEX { fipsInfoFcfIndex }
::= { fipsInfoFcfTable 1 }
FipsInfoFcfEntry ::= SEQUENCE {
fipsInfoFcfIndex Integer32,
fipsInfoFcfMac DisplayString,
fipsInfoFcfPort DisplayString,
fipsInfoFcfVlan Integer32
}
fipsInfoFcfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FCF index"
::= { fipsInfoFcfEntry 1 }
fipsInfoFcfMac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FCF MAC"
::= { fipsInfoFcfEntry 2 }
fipsInfoFcfPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FCF Port"
::= { fipsInfoFcfEntry 3 }
fipsInfoFcfVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FCF Vlan"
::= { fipsInfoFcfEntry 4 }
fipsInfoVlansTable OBJECT-TYPE
SYNTAX SEQUENCE OF FipsInfoVlansEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FCOE VLANs detected."
::= { fipsInfoVlans 1 }
fipsInfoVlansEntry OBJECT-TYPE
SYNTAX FipsInfoVlansEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A FCOE VLAN in the fipsInfoVlans information table."
INDEX { fipsInfoVlansId, fipsInfoVlansFeatureIndex}
::= { fipsInfoVlansTable 1 }
FipsInfoVlansEntry ::= SEQUENCE {
fipsInfoVlansId INTEGER,
fipsInfoVlansFeatureIndex INTEGER,
fipsInfoVlansCreator DisplayString,
fipsInfoVlansPorts OCTET STRING,
fipsInfoVlansTrunks DisplayString
}
fipsInfoVlansId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FCoE Vlan index"
::= { fipsInfoVlansEntry 1 }
fipsInfoVlansFeatureIndex OBJECT-TYPE
SYNTAX INTEGER (0..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FCoE Vlan feature index. The feature index will accept values
from 1 to maximum SPAR ID(8) for the VLANs created by SPAR and
0 for the other types of VLANs."
::= { fipsInfoVlansEntry 2 }
fipsInfoVlansCreator OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The FCoE VLAN Creator."
::= { fipsInfoVlansEntry 3 }
fipsInfoVlansPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN"
::= { fipsInfoVlansEntry 4 }
fipsInfoVlansTrunks OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The FCoE VLAN trunk list."
::= { fipsInfoVlansEntry 5 }
fipsInfoFcoeCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of FCOE connections"
::= { fipsInfoFcoe 1 }
fipsInfoFcoeTable OBJECT-TYPE
SYNTAX SEQUENCE OF FipsInfoFcoeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of fips FCOE connections."
::= { fipsInfoFcoe 2 }
fipsInfoFcoeEntry OBJECT-TYPE
SYNTAX FipsInfoFcoeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A FCOE connection in the fips information table."
INDEX { fipsInfoFcoeIndex }
::= { fipsInfoFcoeTable 1 }
FipsInfoFcoeEntry ::= SEQUENCE {
fipsInfoFcoeIndex Integer32,
fipsInfoFcoeVNPortMac DisplayString,
fipsInfoFcoeFcfMac DisplayString,
fipsInfoFcoePort DisplayString,
fipsInfoFcoeVlan Integer32
}
fipsInfoFcoeIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FCOE connection index"
::= { fipsInfoFcoeEntry 1 }
fipsInfoFcoeVNPortMac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FCOE connection VNPort MAC"
::= { fipsInfoFcoeEntry 2 }
fipsInfoFcoeFcfMac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FCOE connection FCF MAC"
::= { fipsInfoFcoeEntry 3 }
fipsInfoFcoePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FCOE connection Port"
::= { fipsInfoFcoeEntry 4 }
fipsInfoFcoeVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FCOE connection Vlan"
::= { fipsInfoFcoeEntry 5 }
-- FIPS Operational command
fipsOperFcfDelete OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete an FCF. Take an fcf mac address as the only parameter
to delete this fcf from all vlans. Optionally take a vlan
number as 2nd parameter to delete fcf from just this vlan.
The 2 parameters are seperated by comma with no space allowed."
::= { fipsOper 1 }
-- fipsOperFcoeDelete OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..127))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "Delete an FCOE connection. Take 3 parameters seperated by comma: assigned VN_PORT mac address, FCF mac address, and vlan number. No space is allowed."
-- ::= { fipsOper 2 }
-- Stats for fcoe
fcoeStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcoeStatstEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of fcoe statistics per switch unit."
::= { fcoeStats 1 }
fcoeStatsEntry OBJECT-TYPE
SYNTAX FcoeStatstEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A switch unit."
INDEX { fcoeStatsIndex }
::= { fcoeStatsTable 1 }
FcoeStatstEntry ::= SEQUENCE {
fcoeStatsIndex INTEGER,
fcoeStatsFcfAdded INTEGER,
fcoeStatsFcfRemoved INTEGER,
fcoeStatsFcoeAdded INTEGER,
fcoeStatsFcoeRemoved INTEGER
}
fcoeStatsIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch index for fips statistics"
::= { fcoeStatsEntry 1 }
fcoeStatsFcfAdded OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FCF added to the FCOE database."
::= { fcoeStatsEntry 2 }
fcoeStatsFcfRemoved OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FCF removed to the FCOE database."
::= { fcoeStatsEntry 3 }
fcoeStatsFcoeAdded OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FCOE connection added to the FCOE database."
::= { fcoeStatsEntry 4 }
fcoeStatsFcoeRemoved OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FCOE connection removed to the FCOE database."
::= { fcoeStatsEntry 5 }
fcoeStatsKeepAliveTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcoeStatsKeepAliveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of fcoe Keep-Alive statistics."
::= { fcoeStats 2 }
fcoeStatsKeepAliveEntry OBJECT-TYPE
SYNTAX FcoeStatsKeepAliveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A FCF Keep Alive entry."
INDEX { fcoeStatsKeepAliveIndex }
::= { fcoeStatsKeepAliveTable 1 }
FcoeStatsKeepAliveEntry ::= SEQUENCE {
fcoeStatsKeepAliveIndex INTEGER,
fcoeStatsKeepAliveFcfMac DisplayString,
fcoeStatsKeepAliveCount INTEGER
}
fcoeStatsKeepAliveIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The FCF index"
::= { fcoeStatsKeepAliveEntry 1 }
fcoeStatsKeepAliveFcfMac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Detected FCF MAC address."
::= { fcoeStatsKeepAliveEntry 2 }
fcoeStatsKeepAliveCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FCF MAC Keep Alive count."
::= { fcoeStatsKeepAliveEntry 3 }
fcoeStatsResetAllCounters OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
others(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset all FCOE statistics counters."
::= { fcoeStats 3 }
virt OBJECT IDENTIFIER ::= { g8124-mgmt 15 }
-- ----------------------------------------------------------------------------
-- { INSERT: virt
-- ----------------------------------------------------------------------------
virtGeneral OBJECT IDENTIFIER ::= { virt 1 }
vmGroups OBJECT IDENTIFIER ::= { virt 2 }
vmPolicy OBJECT IDENTIFIER ::= { virt 3 }
vmbw OBJECT IDENTIFIER ::= { vmPolicy 1 }
vmProfiles OBJECT IDENTIFIER ::= { virt 4 }
virtVMware OBJECT IDENTIFIER ::= { virt 5 }
vmCheck OBJECT IDENTIFIER ::= { virt 7 }
vmReadyMisc OBJECT IDENTIFIER ::= { virt 8 }
-- ---------------------------------------------------------- --
-- VM General Configuration
-- ---------------------------------------------------------- --
virtCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VM groups global state."
::= { virtGeneral 1}
virtNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Virtual Machine Groups"
::= { virtGeneral 2}
virtCurCfgHbPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current esx/esxi server to vcenter heartbeat UDP port"
::= { virtGeneral 3}
virtNewCfgHbPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set new esx/esxi server to vcenter heartbeat UDP port"
::= { virtGeneral 4}
-- ------------------------------------------------------------------------- --
-- VM Virtual Center Configuration {
-- ------------------------------------------------------------------------- --
virtCurCfgVirtCenterIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the Virtual Center."
::= { virtGeneral 5}
virtNewCfgVirtCenterIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the Virtual Center."
::= { virtGeneral 6 }
virtCurCfgVirtCenterUser OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Virtual Center username."
::= { virtGeneral 7 }
virtNewCfgVirtCenterUser OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Virtual Center username."
::= { virtGeneral 8 }
virtCurCfgVirtCenterSSLAuth OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authenticate SSL Certificate."
::= { virtGeneral 9 }
virtNewCfgVirtCenterSSLAuth OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authenticate SSL Certificate."
::= { virtGeneral 10 }
virtNewCfgVirtCenterPasswd OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..129))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Virtual Center password."
::= { virtGeneral 11 }
virtNewCfgVirtCenterDelete OBJECT-TYPE
SYNTAX INTEGER {
none(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete Virtual Center specifications"
::= { virtGeneral 12 }
-- ------------------------------------------------------------------------- --
-- VM Virtual Center Configuration (end) }
-- ------------------------------------------------------------------------- --
vmCurCfgGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmCurCfgGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VM groups in the current config"
::= { vmGroups 1 }
vmCurCfgGroupEntry OBJECT-TYPE
SYNTAX VmCurCfgGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about VM on a group in current config."
INDEX { vmCurCfgGroupIndex }
::= { vmCurCfgGroupTable 1 }
vmNewCfgGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmNewCfgGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VM groups in the new config"
::= { vmGroups 2 }
vmNewCfgGroupEntry OBJECT-TYPE
SYNTAX VmNewCfgGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about VM on a group in new config."
INDEX { vmNewCfgGroupIndex }
::= { vmNewCfgGroupTable 1 }
VmCurCfgGroupEntry ::= SEQUENCE {
vmCurCfgGroupIndex Integer32,
vmCurCfgGroupVlan INTEGER,
vmCurCfgGroupPorts OCTET STRING,
vmCurCfgGroupTagState INTEGER,
vmCurCfgGroupProfileName DisplayString,
vmCurCfgGroupValidateMode INTEGER,
vmCurCfgGroupStg INTEGER
}
vmCurCfgGroupIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the vm group table."
::= { vmCurCfgGroupEntry 1}
vmCurCfgGroupVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Vlan used by the group."
::= { vmCurCfgGroupEntry 2}
vmCurCfgGroupPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the VM Group. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VM Group
0 - The represented port does not belong to the VM Group"
::= { vmCurCfgGroupEntry 3}
vmCurCfgGroupTagState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable VLAN tagging on all VM group ports."
::= { vmCurCfgGroupEntry 4}
vmCurCfgGroupStg OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current stg of the group vlan."
::= { vmCurCfgGroupEntry 5}
vmCurCfgGroupProfileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current profile name used by the group."
::= { vmCurCfgGroupEntry 17}
vmCurCfgGroupValidateMode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current validation mode used by the group."
::= { vmCurCfgGroupEntry 18}
VmNewCfgGroupEntry ::= SEQUENCE {
vmNewCfgGroupIndex Integer32,
vmNewCfgGroupVlan INTEGER,
vmNewCfgGroupPorts OCTET STRING,
vmNewCfgGroupAddVm DisplayString,
vmNewCfgGroupRemVm DisplayString,
vmNewCfgGroupAddVmIdx INTEGER,
vmNewCfgGroupRemVmIdx INTEGER,
vmNewCfgGroupAddPort PortNumber,
vmNewCfgGroupRemPort PortNumber,
vmNewCfgGroupAddTrunk INTEGER,
vmNewCfgGroupRemTrunk INTEGER,
vmNewCfgGroupTagState INTEGER,
vmNewCfgGroupAddLacpKey Unsigned32,
vmNewCfgGroupRemLacpKey Unsigned32,
vmNewCfgGroupAddProfile DisplayString,
vmNewCfgGroupRemProfile INTEGER,
vmNewCfgGroupProfileName DisplayString,
vmNewCfgGroupDelete INTEGER,
vmNewCfgGroupValidateMode INTEGER,
vmNewCfgGroupStg INTEGER
}
vmNewCfgGroupIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the vm group table."
::= { vmNewCfgGroupEntry 1}
vmNewCfgGroupVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Vlan to be used by the group."
::= { vmNewCfgGroupEntry 2}
vmNewCfgGroupAddVm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add a virtual machine to the group by
UUID / Name / IP / MAC Address
Note: MAC address format xx:xx:xx:xx:xx:xx"
::= { vmNewCfgGroupEntry 4}
vmNewCfgGroupRemVm OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove a virtual machine from the group by
UUID / Name / IP / MAC Address
Note: MAC address format xx:xx:xx:xx:xx:xx"
::= { vmNewCfgGroupEntry 5}
vmNewCfgGroupAddVmIdx OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add virtual MAC address by index to the group."
::= { vmNewCfgGroupEntry 6}
vmNewCfgGroupRemVmIdx OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove a virtual MAC address by index from the group."
::= { vmNewCfgGroupEntry 7}
vmNewCfgGroupAddPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add a port to the group."
::= { vmNewCfgGroupEntry 8}
vmNewCfgGroupRemPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove a port from the group."
::= { vmNewCfgGroupEntry 9}
vmNewCfgGroupAddTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add trunk to the group."
::= { vmNewCfgGroupEntry 10}
vmNewCfgGroupRemTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove trunk from the group."
::= { vmNewCfgGroupEntry 11}
vmNewCfgGroupTagState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable VLAN tagging on all VM group ports."
::= { vmNewCfgGroupEntry 12}
vmNewCfgGroupAddLacpKey OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add LACP trunk to the group."
::= { vmNewCfgGroupEntry 13}
vmNewCfgGroupRemLacpKey OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove LACP trunk from the group."
::= { vmNewCfgGroupEntry 14}
vmNewCfgGroupAddProfile OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add VM Profile to the group."
::= { vmNewCfgGroupEntry 15}
vmNewCfgGroupRemProfile OBJECT-TYPE
SYNTAX INTEGER {
remove(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove any VM profile associated with the group."
::= { vmNewCfgGroupEntry 16 }
vmNewCfgGroupProfileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"New profile name to be used by the group."
::= { vmNewCfgGroupEntry 17}
vmNewCfgGroupDelete OBJECT-TYPE
SYNTAX INTEGER {
delete(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete VM Group."
::= { vmNewCfgGroupEntry 18}
vmNewCfgGroupStg OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set group vlan spanning tree group."
::= { vmNewCfgGroupEntry 19}
vmNewCfgGroupPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the VM Group. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VM Group
0 - The represented port does not belong to the VM Group"
::= { vmNewCfgGroupEntry 3}
vmNewCfgGroupValidateMode OBJECT-TYPE
SYNTAX INTEGER {
noValidation(0),
basicCheck(1),
advancedCheck(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set group validation mode:
noValidation : no validation will be performed.
basicCheck: validate ESX port.
advancedCheck: validate ESX port and VM UUID."
::= { vmNewCfgGroupEntry 20}
vmCurCfgGroupMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmCurCfgGroupMaclistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Virtual machine group current configuration table."
::= {vmGroups 3 }
vmCurCfgGroupMaclistEntry OBJECT-TYPE
SYNTAX VmCurCfgGroupMaclistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about virtual machine group configuration. Indexes are:
- vmCurCfgGroupMacGroupIndex - group number
- vmCurCfgGroupMacVMIndex - virtual machine config index"
INDEX { vmCurCfgGroupMacGroupIndex, vmCurCfgGroupMacVMIndex}
::= { vmCurCfgGroupMacTable 1 }
VmCurCfgGroupMaclistEntry ::= SEQUENCE {
vmCurCfgGroupMacGroupIndex Unsigned32,
vmCurCfgGroupMacVMIndex Unsigned32,
vmCurCfgGroupMacVMMac PhysAddress
}
vmCurCfgGroupMacGroupIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group number for which the info is related."
::= { vmCurCfgGroupMaclistEntry 1 }
vmCurCfgGroupMacVMIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual machine number for which the info is related."
::= { vmCurCfgGroupMaclistEntry 2 }
vmCurCfgGroupMacVMMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"virtual machine MAC address."
::= {vmCurCfgGroupMaclistEntry 3}
vmNewCfgGroupMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmNewCfgGroupMaclistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"virtual machine group new configuration table."
::= { vmGroups 4 }
vmNewCfgGroupMaclistEntry OBJECT-TYPE
SYNTAX VmNewCfgGroupMaclistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about virtual machine group"
INDEX { vmNewCfgGroupMacGroupIndex, vmNewCfgGroupMacVMIndex}
::= { vmNewCfgGroupMacTable 1 }
VmNewCfgGroupMaclistEntry ::= SEQUENCE {
vmNewCfgGroupMacGroupIndex Unsigned32,
vmNewCfgGroupMacVMIndex Unsigned32,
vmNewCfgGroupMacVMMac PhysAddress
}
vmNewCfgGroupMacGroupIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group number for which the info is related."
::= { vmNewCfgGroupMaclistEntry 1 }
vmNewCfgGroupMacVMIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual machine number for which the info is related."
::= { vmNewCfgGroupMaclistEntry 2 }
vmNewCfgGroupMacVMMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual machine MAC address."
::= {vmNewCfgGroupMaclistEntry 3 }
-- ------------------------------------------------------------------------- --
-- VM Policy Configuration {
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- VM Bandwidth Current Configuration {
-- ------------------------------------------------------------------------- --
vmbwCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmbwCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of current VM Bandwidth configuration."
::= { vmbw 1 }
vmbwCurCfgEntry OBJECT-TYPE
SYNTAX VmbwCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the current VM bandwidth table."
INDEX { vmbwCurCfgMac }
::= { vmbwCurCfgTable 1 }
VmbwCurCfgEntry ::= SEQUENCE {
vmbwCurCfgMac MacAddress,
vmbwCurCfgTxRate Unsigned32,
vmbwCurCfgTxBurst Unsigned32,
vmbwCurCfgTxAclId Unsigned32,
vmbwCurCfgCtrl INTEGER
}
vmbwCurCfgMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of VM for which bandwidth control information is related."
::= { vmbwCurCfgEntry 1 }
vmbwCurCfgTxRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VM transmit bandwidth committed rate in kbps (ingress for switch)."
::= { vmbwCurCfgEntry 2 }
vmbwCurCfgTxBurst OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VM transmit bandwidth max burst size in kilobits (ingress for switch)."
::= { vmbwCurCfgEntry 3 }
vmbwCurCfgTxAclId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL used for VM transmit bandwidth."
::= { vmbwCurCfgEntry 4 }
vmbwCurCfgCtrl OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable VM bandwidth control entry."
::= { vmbwCurCfgEntry 7 }
-- ------------------------------------------------------------------------- --
-- VM Bandwidth Current Configuration (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- VM Bandwidth New Configuration {
-- ------------------------------------------------------------------------- --
vmbwNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmbwNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of new VM Bandwidth configuration."
::= { vmbw 2 }
vmbwNewCfgEntry OBJECT-TYPE
SYNTAX VmbwNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the new VM bandwidth table."
INDEX { vmbwNewCfgMac }
::= { vmbwNewCfgTable 1 }
VmbwNewCfgEntry ::= SEQUENCE {
vmbwNewCfgMac MacAddress,
vmbwNewCfgTxRate Unsigned32,
vmbwNewCfgTxBurst Unsigned32,
vmbwNewCfgTxAclId Unsigned32,
vmbwNewCfgCtrl INTEGER,
vmbwNewCfgDelete INTEGER
}
vmbwNewCfgMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of VM for which bandwidth control information is related."
::= { vmbwNewCfgEntry 1 }
vmbwNewCfgTxRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VM transmit bandwidth committed rate in kbps (ingress for switch).
Set this to zero to disable transmit bandwidth control."
::= { vmbwNewCfgEntry 2 }
vmbwNewCfgTxBurst OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VM transmit bandwidth max burst size in kilobits (ingress for switch).
Set this to zero to disable transmit bandwidth control."
::= { vmbwNewCfgEntry 3 }
vmbwNewCfgTxAclId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ACL used for VM transmit bandwidth.
This is optional parameter. If set to zero the system will choose
one ACL for tx bandwidth control."
::= { vmbwNewCfgEntry 4 }
vmbwNewCfgCtrl OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VM bandwidth control entry status"
::= { vmbwNewCfgEntry 7 }
vmbwNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to delete a VM Bandwidth entry.
other(1) is returned always when read.
To delete an entry enter delete(2)."
::= { vmbwNewCfgEntry 8 }
-- ------------------------------------------------------------------------- --
-- VM Bandwidth New Configuration (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- VM Policy Configuration (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- VM Check Configuration {
-- ------------------------------------------------------------------------- --
vmCurCfgCheck OBJECT IDENTIFIER
::= { vmCheck 1 }
vmNewCfgCheck OBJECT IDENTIFIER
::= { vmCheck 2 }
vmCurCfgCheckActionBasic OBJECT-TYPE
SYNTAX INTEGER {
log(1),
link(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current settings for basic checking mode"
::= { vmCurCfgCheck 1 }
vmCurCfgCheckActionAdvanced OBJECT-TYPE
SYNTAX INTEGER {
log(1),
link(2),
acl(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current settings for advanced checking mode"
::= { vmCurCfgCheck 2 }
vmCurCfgCheckAclsMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current value for the maximum number of ACLs that can be used by Mac Spoofing Check feature"
::= { vmCurCfgCheck 3 }
vmCurCfgCheckTrust OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current value for the configured trusted port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trusted ports list
0 - The represented port does not belong to the trusted ports list"
::= { vmCurCfgCheck 4 }
vmNewCfgCheckActionBasic OBJECT-TYPE
SYNTAX INTEGER {
log(1),
link(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New settings for basic checking mode"
::= { vmNewCfgCheck 1 }
vmNewCfgCheckActionAdvanced OBJECT-TYPE
SYNTAX INTEGER {
log(1),
link(2),
acl(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New settings for advanced checking mode"
::= { vmNewCfgCheck 2 }
vmNewCfgCheckAclsMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New value for the maximum number of ACLs that can be used by Mac Spoofing Check feature"
::= { vmNewCfgCheck 3 }
vmNewCfgCheckTrust OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"New value for the configured trusted port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trusted ports list
0 - The represented port does not belong to the trusted ports list"
::= { vmNewCfgCheck 4 }
vmNewCfgCheckTrustAddPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add port to the configured trusted port list."
::= { vmNewCfgCheck 5 }
vmNewCfgCheckTrustRemPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove port from the configured trusted port list."
::= { vmNewCfgCheck 6 }
-- ------------------------------------------------------------------------- --
-- VM Profiles Configuration {
-- ------------------------------------------------------------------------- --
vmCurCfgProfilesTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmCurCfgProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VM profiles in the current config"
::= { vmProfiles 1 }
vmCurCfgProfileEntry OBJECT-TYPE
SYNTAX VmCurCfgProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a VM profile in current config."
INDEX { vmCurCfgProfileIndex }
::= { vmCurCfgProfilesTable 1 }
VmCurCfgProfileEntry ::= SEQUENCE {
vmCurCfgProfileIndex Integer32,
vmCurCfgProfileName DisplayString,
vmCurCfgProfileVlan INTEGER,
vmCurCfgProfileShapingAverage Integer32,
vmCurCfgProfileShapingBurst Integer32,
vmCurCfgProfileShapingPeak Integer32
, vmCurCfgProfileEgressShapingAverage Integer32,
vmCurCfgProfileEgressShapingBurst Integer32,
vmCurCfgProfileEgressShapingPeak Integer32
}
vmCurCfgProfileIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the vm profiles table (1..32)."
::= { vmCurCfgProfileEntry 1}
vmCurCfgProfileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VM Profile name."
::= { vmCurCfgProfileEntry 2}
vmCurCfgProfileVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current VM Profile VLAN Id"
::= { vmCurCfgProfileEntry 3}
vmCurCfgProfileShapingAverage OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current VM Profile Shaping Average."
::= { vmCurCfgProfileEntry 4}
vmCurCfgProfileShapingBurst OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current VM Profile Shaping Burst."
::= { vmCurCfgProfileEntry 5}
vmCurCfgProfileShapingPeak OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current VM Profile Shaping Peak."
::= { vmCurCfgProfileEntry 6}
vmCurCfgProfileEgressShapingAverage OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current VM Profile Egress Shaping Average."
::= { vmCurCfgProfileEntry 7}
vmCurCfgProfileEgressShapingBurst OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current VM Profile Egress Shaping Burst."
::= { vmCurCfgProfileEntry 8}
vmCurCfgProfileEgressShapingPeak OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current VM Profile Egress Shaping Peak."
::= { vmCurCfgProfileEntry 9}
vmNewCfgProfilesTable OBJECT-TYPE
SYNTAX SEQUENCE OF VmNewCfgProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VM profiles in the current config"
::= { vmProfiles 2 }
vmNewCfgProfileEntry OBJECT-TYPE
SYNTAX VmNewCfgProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a VM profile in current config."
INDEX { vmNewCfgProfileIndex }
::= { vmNewCfgProfilesTable 1 }
VmNewCfgProfileEntry ::= SEQUENCE {
vmNewCfgProfileIndex Integer32,
vmNewCfgProfileName DisplayString,
vmNewCfgProfileVlan INTEGER,
vmNewCfgProfileShapingAverage Integer32,
vmNewCfgProfileShapingBurst Integer32,
vmNewCfgProfileShapingPeak Integer32,
vmNewCfgProfileDelete INTEGER
, vmNewCfgProfileEgressShapingAverage Integer32,
vmNewCfgProfileEgressShapingBurst Integer32,
vmNewCfgProfileEgressShapingPeak Integer32
}
vmNewCfgProfileIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the vm profiles table (1..32)."
::= { vmNewCfgProfileEntry 1}
vmNewCfgProfileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..39))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VM Profile name."
::= { vmNewCfgProfileEntry 2}
vmNewCfgProfileVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vlan to be used by the VM profile."
::= { vmNewCfgProfileEntry 3}
vmNewCfgProfileShapingAverage OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Shaping average to be used by the VM profile."
::= { vmNewCfgProfileEntry 4}
vmNewCfgProfileShapingBurst OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Shaping burst to be used by the VM profile."
::= { vmNewCfgProfileEntry 5}
vmNewCfgProfileShapingPeak OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Shaping peak to be used by the VM profile."
::= { vmNewCfgProfileEntry 6}
vmNewCfgProfileDelete OBJECT-TYPE
SYNTAX INTEGER {
none(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete VM Profile."
::= { vmNewCfgProfileEntry 7}
vmNewCfgProfileEgressShapingAverage OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Egress shaping average to be used by the VM profile."
::= { vmNewCfgProfileEntry 8}
vmNewCfgProfileEgressShapingBurst OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Egress shaping burst to be used by the VM profile."
::= { vmNewCfgProfileEntry 9}
vmNewCfgProfileEgressShapingPeak OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Egress shaping peak to be used by the VM profile."
::= { vmNewCfgProfileEntry 10}
-- ------------------------------------------------------------------------- --
-- VM Profiles Configuration (end) }
-- ------------------------------------------------------------------------- --
-- ------------------------------------------------------------------------- --
-- VMware information
-- ------------------------------------------------------------------------- --
virtVMwareNameTableUpdate OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
get(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to get information from the Virtual Center.
Set this value to get(2) to update the host and VM name tables:
virtVMwareHostNameTable,
virtVMwareVMNameTable
with information from the Virtual Center.
These two tables can be querried by subsequent Get operations
without accessing the Virtual Center.
To refresh these two tables, set virtVMwareNameTableUpdate again.
ok(1) is returned always when read."
::= { virtVMware 1 }
virtVMwareHostNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF VirtVMwareHostNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of names of VMware hosts in the Virtual Center."
::= { virtVMware 2 }
virtVMwareHostNameEntry OBJECT-TYPE
SYNTAX VirtVMwareHostNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about names of VMware hosts in the Data Center."
INDEX { virtVMwareHostNameIndex }
::= { virtVMwareHostNameTable 1 }
VirtVMwareHostNameEntry ::= SEQUENCE {
virtVMwareHostNameIndex Integer32,
virtVMwareHostNameUUID DisplayString,
virtVMwareHostNameIpAddress DisplayString,
virtVMwareHostNameName DisplayString
}
virtVMwareHostNameIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the virtVMwareHostNameTable table."
::= { virtVMwareHostNameEntry 1}
virtVMwareHostNameUUID OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UUID of a VMware host."
::= { virtVMwareHostNameEntry 2}
virtVMwareHostNameIpAddress OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of a VMware host."
::= { virtVMwareHostNameEntry 3}
virtVMwareHostNameName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of a VMware host."
::= { virtVMwareHostNameEntry 4}
virtVMwareVMNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF VirtVMwareVMNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VMware virtual machines in the Data Center."
::= { virtVMware 3 }
virtVMwareVMNameEntry OBJECT-TYPE
SYNTAX VirtVMwareVMNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about VMware virtual machines in the Data Center."
INDEX { virtVMwareVMNameIndex }
::= { virtVMwareVMNameTable 1 }
VirtVMwareVMNameEntry ::= SEQUENCE {
virtVMwareVMNameIndex Integer32,
virtVMwareVMNameUUID DisplayString,
virtVMwareVMNameVMwareName DisplayString,
virtVMwareVMNameOsName DisplayString,
virtVMwareVMNameIpAddress DisplayString
}
virtVMwareVMNameIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the VMware virtual machine table in the Data Center."
::= { virtVMwareVMNameEntry 1}
virtVMwareVMNameUUID OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UUID of a virtual machine."
::= { virtVMwareVMNameEntry 2}
virtVMwareVMNameVMwareName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of a virtual machine given by VMware."
::= { virtVMwareVMNameEntry 3}
virtVMwareVMNameOsName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of a virtual machine given by the host OS."
::= { virtVMwareVMNameEntry 4}
virtVMwareVMNameIpAddress OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of a virtual machine."
::= { virtVMwareVMNameEntry 5}
virtVMwareHost OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VMware host ID
This is an action object to get information about a specific
host from the Virtual Center.
This object specifies the host ID by
UUID / IP Address / Name.
Setting this objects populates the following 3 tables:
virtVMwareHostVswitchTable,
virtVMwareHostPGTable,
virtVMwareHostDetailInfoTable
with the host's networking information from the Virtul
Center.
These three tables can be querried by subsequent Get
operations without accessing the Virtual Center.
To refresh these tables, set this object to the target host."
::= { virtVMware 4 }
virtVMwareHostVswitchTable OBJECT-TYPE
SYNTAX SEQUENCE OF VirtVMwareHostVswitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Vswitches available on the specified host."
::= { virtVMware 5 }
virtVMwareHostVswitchEntry OBJECT-TYPE
SYNTAX VirtVMwareHostVswitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about Vswitches available on the specified host."
INDEX { virtVMwareHostVswitchIndex }
::= { virtVMwareHostVswitchTable 1 }
VirtVMwareHostVswitchEntry ::= SEQUENCE {
virtVMwareHostVswitchIndex Integer32,
virtVMwareHostVswitchName DisplayString
}
virtVMwareHostVswitchIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Vswitch table on the specified host."
::= { virtVMwareHostVswitchEntry 1}
virtVMwareHostVswitchName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of a Vswitch on the specified host."
::= { virtVMwareHostVswitchEntry 2}
virtVMwareHostPGTable OBJECT-TYPE
SYNTAX SEQUENCE OF VirtVMwareHostPGEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Port Groups available on the specified host."
::= { virtVMware 6 }
virtVMwareHostPGEntry OBJECT-TYPE
SYNTAX VirtVMwareHostPGEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about Port Groups available on the specified host."
INDEX { virtVMwareHostPGIndex }
::= { virtVMwareHostPGTable 1 }
VirtVMwareHostPGEntry ::= SEQUENCE {
virtVMwareHostPGIndex Integer32,
virtVMwareHostPGName DisplayString,
virtVMwareHostPGVswitchName DisplayString
}
virtVMwareHostPGIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Port Group table on the specified host."
::= { virtVMwareHostPGEntry 1}
virtVMwareHostPGName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of a Port Group on the specified host."
::= { virtVMwareHostPGEntry 2}
virtVMwareHostPGVswitchName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of a Vswitch on the specified host."
::= { virtVMwareHostPGEntry 3}
virtVMwareHostDetailInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF VirtVMwareHostDetailInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of detailed information available on the specified
host/VM interface."
::= { virtVMware 7 }
virtVMwareHostDetailInfoEntry OBJECT-TYPE
SYNTAX VirtVMwareHostDetailInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Detailed information available on the specified host/VM interface."
INDEX { virtVMwareHostDetailInfoIndex }
::= { virtVMwareHostDetailInfoTable 1 }
VirtVMwareHostDetailInfoEntry ::= SEQUENCE {
virtVMwareHostDetailInfoIndex Integer32,
virtVMwareHostDetailInfoMACAddr DisplayString,
virtVMwareHostDetailInfoPort DisplayString,
virtVMwareHostDetailInfoType DisplayString,
virtVMwareHostDetailInfoIPAddr DisplayString,
virtVMwareHostDetailInfoUUID DisplayString,
virtVMwareHostDetailInfoVswitch DisplayString,
virtVMwareHostDetailInfoPortGroup DisplayString,
virtVMwareHostDetailInfoVlanID DisplayString,
virtVMwareHostDetailInfoHostName DisplayString,
virtVMwareHostDetailInfoVMVCenterName DisplayString,
virtVMwareHostDetailInfoVMOSHostName DisplayString,
virtVMwareHostDetailInfoVMCurrentHost DisplayString
}
virtVMwareHostDetailInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the detailed information table on the specified
host/VM interface."
::= { virtVMwareHostDetailInfoEntry 1}
virtVMwareHostDetailInfoMACAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the host/VM interface."
::= { virtVMwareHostDetailInfoEntry 2}
virtVMwareHostDetailInfoPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the specified host/VM interface."
::= { virtVMwareHostDetailInfoEntry 3}
virtVMwareHostDetailInfoType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface type"
::= { virtVMwareHostDetailInfoEntry 4}
virtVMwareHostDetailInfoIPAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the specified host/VM interface."
::= { virtVMwareHostDetailInfoEntry 5}
virtVMwareHostDetailInfoUUID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UUID of the specified host/VM interface."
::= { virtVMwareHostDetailInfoEntry 6}
virtVMwareHostDetailInfoVswitch OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the virtual switch of the specified host/VM interface."
::= { virtVMwareHostDetailInfoEntry 7}
virtVMwareHostDetailInfoPortGroup OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the port group of the specified host/VM interface."
::= { virtVMwareHostDetailInfoEntry 8}
virtVMwareHostDetailInfoVlanID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the specified host/VM interface."
::= { virtVMwareHostDetailInfoEntry 9}
virtVMwareHostDetailInfoHostName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the specified host interface.
N/A for VMs."
::= { virtVMwareHostDetailInfoEntry 10}
virtVMwareHostDetailInfoVMVCenterName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the Virtual Center of the specified VM interface.
N/A for host interfaces."
::= { virtVMwareHostDetailInfoEntry 11}
virtVMwareHostDetailInfoVMOSHostName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the VM set by the host operating system.
N/A for host interfaces."
::= { virtVMwareHostDetailInfoEntry 12}
virtVMwareHostDetailInfoVMCurrentHost OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the host of the specified VM.
N/A for host interfaces."
::= { virtVMwareHostDetailInfoEntry 13}
virtVMwareVM OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VMware virtual machine ID
This is an action object to get information about a specific
virtual machine from the Virtual Center.
This object specifies the VM ID by by
UUID / IP Address / Name.
Setting this object populates the virtVMwareVMInfoTable
table with networking information for this VM from the
Virtual Center.
This table can be querried by subsequent Get operations
without accessing the Virtual Center.
To refresh the table, set this object to the target VM. "
::= { virtVMware 8 }
virtVMwareVMInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF VirtVMwareVMInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of networking information available on the
specified VM."
::= { virtVMware 9 }
virtVMwareVMInfoEntry OBJECT-TYPE
SYNTAX VirtVMwareVMInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Detailed information available on the specified VM."
INDEX { virtVMwareVMInfoIndex }
::= { virtVMwareVMInfoTable 1 }
VirtVMwareVMInfoEntry ::= SEQUENCE {
virtVMwareVMInfoIndex Integer32,
virtVMwareVMInfoMACAddr DisplayString,
virtVMwareVMInfoPort DisplayString,
virtVMwareVMInfoType DisplayString,
virtVMwareVMInfoIPAddr DisplayString,
virtVMwareVMInfoUUID DisplayString,
virtVMwareVMInfoVswitch DisplayString,
virtVMwareVMInfoPortGroup DisplayString,
virtVMwareVMInfoVlanID DisplayString,
virtVMwareVMInfoVMVCenterName DisplayString,
virtVMwareVMInfoVMOSHostName DisplayString,
virtVMwareVMInfoVMCurrentHost DisplayString
}
virtVMwareVMInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the table with information on the
specified VM."
::= { virtVMwareVMInfoEntry 1}
virtVMwareVMInfoMACAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the specified VM."
::= { virtVMwareVMInfoEntry 2}
virtVMwareVMInfoPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the specified VM."
::= { virtVMwareVMInfoEntry 3}
virtVMwareVMInfoType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface type"
::= { virtVMwareVMInfoEntry 4}
virtVMwareVMInfoIPAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the specified VM."
::= { virtVMwareVMInfoEntry 5}
virtVMwareVMInfoUUID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UUID of the specified VM."
::= { virtVMwareVMInfoEntry 6}
virtVMwareVMInfoVswitch OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the virtual switch of the specified VM."
::= { virtVMwareVMInfoEntry 7}
virtVMwareVMInfoPortGroup OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the port group of the specified VM."
::= { virtVMwareVMInfoEntry 8}
virtVMwareVMInfoVlanID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID of the specified VM."
::= { virtVMwareVMInfoEntry 9}
virtVMwareVMInfoVMVCenterName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the Virtual Center of the specified VM."
::= { virtVMwareVMInfoEntry 10}
virtVMwareVMInfoVMOSHostName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the VM set by the host operating system."
::= { virtVMwareVMInfoEntry 11}
virtVMwareVMInfoVMCurrentHost OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the host of the specified VM."
::= { virtVMwareVMInfoEntry 12}
virtCurCfgVMwareHello OBJECT IDENTIFIER ::= { virtVMware 10 }
virtNewCfgVMwareHello OBJECT IDENTIFIER ::= { virtVMware 11 }
virtCurCfgVMwareHelloEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current value for hello advertising status"
::= { virtCurCfgVMwareHello 1 }
virtCurCfgVMwareHelloTimer OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current hello packet send interval"
::= { virtCurCfgVMwareHello 2 }
virtCurCfgVMwareHelloPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current value for the configured hello port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the hello ports list
0 - The represented port does not belong to the hello ports list"
::= { virtCurCfgVMwareHello 3 }
virtCurCfgVMwareHelloAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current VM hello IP address"
::= { virtCurCfgVMwareHello 4 }
virtNewCfgVMwareHelloEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New value for hello advertising status"
::= { virtNewCfgVMwareHello 1 }
virtNewCfgVMwareHelloTimer OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New hello packet send interval"
::= { virtNewCfgVMwareHello 2 }
virtNewCfgVMwareHelloPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"New value for the configured hello port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the hello ports list
0 - The represented port does not belong to the hello ports list"
::= { virtNewCfgVMwareHello 3 }
virtNewCfgVMwareHelloAddPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add a port to the hello port list"
::= { virtNewCfgVMwareHello 4 }
virtNewCfgVMwareHelloRemovePort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove a port from the hello port list"
::= { virtNewCfgVMwareHello 5 }
virtNewCfgVMwareHelloAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New VM hello IP address"
::= { virtNewCfgVMwareHello 6 }
-- ------------------------------------------------------------------------- --
-- VMware information (end) }
-- ------------------------------------------------------------------------- --
-- ----------------------------------------------------------------------------
-- VMReady Information {
-- ----------------------------------------------------------------------------
agVMGroupInfo OBJECT IDENTIFIER ::= { agentInfo 12 }
vmGroupInfoTbl OBJECT-TYPE
SYNTAX SEQUENCE OF VMGroupInfolistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Virtual MAC information table"
::= { agVMGroupInfo 1 }
vmGroupInfolistEntry OBJECT-TYPE
SYNTAX VMGroupInfolistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The run-time information about a virtual machine"
INDEX { vmGroupInfoIdx }
::= { vmGroupInfoTbl 1 }
VMGroupInfolistEntry ::= SEQUENCE {
vmGroupInfoIdx Unsigned32,
vmGroupInfoMac PhysAddress,
vmGroupInfoIP IpAddress,
vmGroupInfoPort PortNumber,
vmGroupInfoGroup Unsigned32,
vmGroupInfoVlan Unsigned32,
vmGroupInfoIsESXSvcCon Unsigned32
,vmGroupInfoIsVMK Unsigned32,
vmGroupInfoName DisplayString,
vmGroupInfoUUID DisplayString,
vmGroupInfoVSwitch DisplayString,
vmGroupInfoPortGroup DisplayString,
vmGroupInfoHost DisplayString
}
vmGroupInfoIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Table index, 1 based."
::= { vmGroupInfolistEntry 1 }
vmGroupInfoMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual machine MAC address."
::= {vmGroupInfolistEntry 2 }
vmGroupInfoIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual machine IP address."
::= {vmGroupInfolistEntry 3 }
vmGroupInfoPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"System port connected to the virtual machine."
::= { vmGroupInfolistEntry 4 }
vmGroupInfoGroup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual machine group."
::= {vmGroupInfolistEntry 5 }
vmGroupInfoVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual machine VLAN"
::= {vmGroupInfolistEntry 6 }
vmGroupInfoIsESXSvcCon OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set to 1 if ESX Service Console Interface, else 0."
::= {vmGroupInfolistEntry 7 }
vmGroupInfoIsVMK OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set to 1 if VM Kernel Interface, else 0."
::= {vmGroupInfolistEntry 8 }
vmGroupInfoName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Virtual Machine Name, if available."
::= {vmGroupInfolistEntry 9 }
vmGroupInfoUUID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Virtual Machine UUID, if available."
::= {vmGroupInfolistEntry 10 }
vmGroupInfoVSwitch OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Virtual Machine VSwitch, if available."
::= {vmGroupInfolistEntry 11 }
vmGroupInfoPortGroup OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Virtual Machine Port Group, if available."
::= {vmGroupInfolistEntry 12 }
vmGroupInfoHost OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Virtual Machine Host, if available."
::= {vmGroupInfolistEntry 13 }
-- ----------------------------------------------------------------------------
-- VMReady Information }
-- ----------------------------------------------------------------------------
-- ------------------------------------------------------------------------- --
-- VMReady Miscellaneous Configuration {
-- ------------------------------------------------------------------------- --
vmReadyLocalAdmMac OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Treat locally administred MAC address as VMs"
::= { vmReadyMisc 1 }
vmReadyCurCfgOuiTbl OBJECT-TYPE
SYNTAX SEQUENCE OF VMReadyCurCfgOuiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of current VM Ready OUI configuration."
::= { vmReadyMisc 2 }
vmReadyCurCfgOuiEntry OBJECT-TYPE
SYNTAX VMReadyCurCfgOuiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the current VM Ready OUI table."
INDEX { vmReadyCurCfgOuiMacIdx }
::= { vmReadyCurCfgOuiTbl 1 }
VMReadyCurCfgOuiEntry ::= SEQUENCE {
vmReadyCurCfgOuiMacIdx Unsigned32,
vmReadyCurCfgOuiMac PhysAddress,
vmReadyCurCfgVendor DisplayString
}
vmReadyCurCfgOuiMacIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OUI of locally administred MAC address"
::= { vmReadyCurCfgOuiEntry 1 }
vmReadyCurCfgOuiMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OUI of locally administred MAC address"
::= { vmReadyCurCfgOuiEntry 2 }
vmReadyCurCfgVendor OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vendor name of the OUI locally administred"
::= { vmReadyCurCfgOuiEntry 3 }
vmReadyNewCfgOuiTbl OBJECT-TYPE
SYNTAX SEQUENCE OF VMReadyNewCfgOuiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of new VM Ready OUI configuration."
::= { vmReadyMisc 3 }
vmReadyNewCfgOuiEntry OBJECT-TYPE
SYNTAX VMReadyNewCfgOuiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the new VM Ready OUI table."
INDEX { vmReadyNewCfgOuiMacIdx }
::= { vmReadyNewCfgOuiTbl 1 }
VMReadyNewCfgOuiEntry ::= SEQUENCE {
vmReadyNewCfgOuiMacIdx Unsigned32,
vmReadyNewCfgOuiMac DisplayString,
vmReadyNewCfgVendor DisplayString,
vmReadyNewCfgDelete INTEGER
}
vmReadyNewCfgOuiMacIdx OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OUI of locally administred MAC address"
::= { vmReadyNewCfgOuiEntry 1 }
vmReadyNewCfgOuiMac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New OUI of locally administred MAC address
Format xx:yy:zz "
::= { vmReadyNewCfgOuiEntry 2 }
vmReadyNewCfgVendor OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vendor name of the OUI locally administred"
::= { vmReadyNewCfgOuiEntry 3 }
vmReadyNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(0),
delete(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set the OUI of the locally administred MAC would be deleted"
::= { vmReadyNewCfgOuiEntry 4 }
-- ------------------------------------------------------------------------- --
-- VMReady Miscellaneous Configuration(end) }
-- ------------------------------------------------------------------------- --
-- ----------------------------------------------------------------------------
-- } INSERT: virt
-- ----------------------------------------------------------------------------
vnic OBJECT IDENTIFIER ::= { g8124-mgmt 16 }
-- ----------------------------------------------------------------------------
-- { INSERT: vnic
-- ----------------------------------------------------------------------------
vnicCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VNIC global state."
::= { vnic 1 }
vnicNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable vNIC."
::= { vnic 2 }
vnicCurCfgVnicTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnicCurCfgVnicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of vNICs"
::= { vnic 7 }
vnicCurCfgVnicEntry OBJECT-TYPE
SYNTAX VnicCurCfgVnicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A vNIC in the vnicCurCfgVnicTable"
INDEX { vnicCurCfgVnicPortIndex, vnicCurCfgVnicIndex }
::= { vnicCurCfgVnicTable 1 }
VnicCurCfgVnicEntry ::= SEQUENCE {
vnicCurCfgVnicPortIndex PortNumber,
vnicCurCfgVnicIndex INTEGER,
vnicCurCfgVnicState INTEGER,
vnicCurCfgVnicBw INTEGER,
vnicCurCfgVnicType INTEGER,
vnicCurCfgVnicMAC DisplayString
}
vnicCurCfgVnicPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the vNIC."
::= { vnicCurCfgVnicEntry 1 }
vnicCurCfgVnicIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vNIC number of the vNIC."
::= { vnicCurCfgVnicEntry 2 }
vnicCurCfgVnicState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state the vNIC."
::= { vnicCurCfgVnicEntry 3 }
vnicCurCfgVnicBw OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum bandwidth the vNIC."
::= { vnicCurCfgVnicEntry 4 }
vnicCurCfgVnicType OBJECT-TYPE
SYNTAX INTEGER {
default(1),
fcoe(2),
iscsi(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the vNIC."
::= { vnicCurCfgVnicEntry 5 }
vnicCurCfgVnicMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the vNIC."
::= { vnicCurCfgVnicEntry 6 }
vnicNewCfgVnicTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnicNewCfgVnicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of vNICs"
::= { vnic 8 }
vnicNewCfgVnicEntry OBJECT-TYPE
SYNTAX VnicNewCfgVnicEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A vNIC in the vnicNewCfgVnicTable"
INDEX { vnicNewCfgVnicPortIndex, vnicNewCfgVnicIndex }
::= { vnicNewCfgVnicTable 1 }
VnicNewCfgVnicEntry ::= SEQUENCE {
vnicNewCfgVnicPortIndex PortNumber,
vnicNewCfgVnicIndex INTEGER,
vnicNewCfgVnicState INTEGER,
vnicNewCfgVnicBw INTEGER
}
vnicNewCfgVnicPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the vNIC."
::= { vnicNewCfgVnicEntry 1 }
vnicNewCfgVnicIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vNIC number of the vNIC."
::= { vnicNewCfgVnicEntry 2 }
vnicNewCfgVnicState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state the vNIC."
::= { vnicNewCfgVnicEntry 3 }
vnicNewCfgVnicBw OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum bandwidth the vNIC."
::= { vnicNewCfgVnicEntry 4 }
vnicCurCfgGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnicCurCfgGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of vNIC Groups"
::= { vnic 9 }
vnicCurCfgGroupEntry OBJECT-TYPE
SYNTAX VnicCurCfgGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A vNIC in the vnicCurCfgGroupTable"
INDEX { vnicCurCfgGroupIndex }
::= { vnicCurCfgGroupTable 1}
VnicCurCfgGroupEntry ::= SEQUENCE {
vnicCurCfgGroupIndex INTEGER,
vnicCurCfgGroupState INTEGER,
vnicCurCfgGroupVlan INTEGER,
vnicCurCfgGroupFailoverState INTEGER,
vnicCurCfgGroupVnics DisplayString,
vnicCurCfgGroupPorts DisplayString,
vnicCurCfgGroupTrunk INTEGER
}
vnicCurCfgGroupIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vNIC group number."
::= { vnicCurCfgGroupEntry 1 }
vnicCurCfgGroupState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vNIC group state."
::= { vnicCurCfgGroupEntry 2 }
vnicCurCfgGroupVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vNIC group vlan number."
::= { vnicCurCfgGroupEntry 3 }
vnicCurCfgGroupFailoverState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vNIC group failover state."
::= { vnicCurCfgGroupEntry 4 }
vnicCurCfgGroupVnics OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vNICs in the vNIC group."
::= { vnicCurCfgGroupEntry 5 }
vnicCurCfgGroupPorts OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Non-vNIC Ports and/or uplink port in the vNIC group."
::= { vnicCurCfgGroupEntry 6 }
vnicCurCfgGroupTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uplink trunk in the vNIC group."
::= { vnicCurCfgGroupEntry 7 }
vnicNewCfgGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnicNewCfgGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of vNIC Groups"
::= { vnic 10 }
vnicNewCfgGroupEntry OBJECT-TYPE
SYNTAX VnicNewCfgGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A vNIC in the vnicNewCfgGroupTable"
INDEX { vnicNewCfgGroupIndex }
::= { vnicNewCfgGroupTable 1}
VnicNewCfgGroupEntry ::= SEQUENCE {
vnicNewCfgGroupIndex INTEGER,
vnicNewCfgGroupState INTEGER,
vnicNewCfgGroupVlan INTEGER,
vnicNewCfgGroupFailoverState INTEGER,
vnicNewCfgGroupAddVnic DisplayString,
vnicNewCfgGroupRemVnic DisplayString,
vnicNewCfgGroupAddPort INTEGER,
vnicNewCfgGroupRemPort INTEGER,
vnicNewCfgGroupAddTrunk INTEGER,
vnicNewCfgGroupRemTrunk INTEGER,
vnicNewCfgGroupDelete INTEGER,
vnicNewCfgGroupVnics DisplayString,
vnicNewCfgGroupPorts DisplayString,
vnicNewCfgGroupTrunk INTEGER
}
vnicNewCfgGroupIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vNIC group number."
::= { vnicNewCfgGroupEntry 1 }
vnicNewCfgGroupState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disalbe the vNIC group."
::= { vnicNewCfgGroupEntry 2 }
vnicNewCfgGroupVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the vNIC group vlan number."
::= { vnicNewCfgGroupEntry 3 }
vnicNewCfgGroupFailoverState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the vNIC group failover state."
::= { vnicNewCfgGroupEntry 4 }
vnicNewCfgGroupAddVnic OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add a vNIC to the vNIC group."
::= { vnicNewCfgGroupEntry 5 }
vnicNewCfgGroupRemVnic OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove a vNIC to the vNIC group."
::= { vnicNewCfgGroupEntry 6 }
vnicNewCfgGroupAddPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add a non-vNIC port or a uplink port to the vNIC group."
::= { vnicNewCfgGroupEntry 7 }
vnicNewCfgGroupRemPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove a non-vNIC port or a uplink port from the vNIC group."
::= { vnicNewCfgGroupEntry 8 }
vnicNewCfgGroupAddTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add a uplink trunk to the vNIC group."
::= { vnicNewCfgGroupEntry 9 }
vnicNewCfgGroupRemTrunk OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remove the uplink trunk from the vNIC group.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete the uplink trunk from the vNIC group"
::= { vnicNewCfgGroupEntry 10 }
vnicNewCfgGroupDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete the vNIC group.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete the vNIC group"
::= { vnicNewCfgGroupEntry 13 }
vnicNewCfgGroupVnics OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vNICs in the vNIC group."
::= { vnicNewCfgGroupEntry 14 }
vnicNewCfgGroupPorts OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Non-vNIC Ports and/or uplink port in the vNIC group."
::= { vnicNewCfgGroupEntry 15 }
vnicNewCfgGroupTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uplink trunk in the vNIC group."
::= { vnicNewCfgGroupEntry 16 }
-- ----------------------------------------------------------------------------
-- } INSERT: vnic
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- } INSERT: bntRoot
-- ----------------------------------------------------------------------------
-- Access Switch for Blade OS TOR Private MIBs
-- tor-BladeSwitch OBJECT IDENTIFIER ::= { blade 100 }
-- MIB definitions for Standalone BNT Private MIBs
-- Access "productID" group for Common Standalone BNT Private MIBs
ibmnos-BladeSwitch OBJECT IDENTIFIER ::= {
blade
102 }
ibmnoscfa OBJECT IDENTIFIER ::= { ibmnos-BladeSwitch 27 }
-- ----------------------------------------------------------------------------
-- { INSERT: cfa
-- ----------------------------------------------------------------------------
if OBJECT IDENTIFIER ::= { ibmnoscfa 1 }
-- ifMainTable
-- This table is used for the management of all the interfaces in the
-- system.
ifMainTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfMainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all the interface entries in the system.
This table contains objects which are applicable to all
types of interfaces in the system. This table is a
proprietary extension to the standard ifTable and
ifXTable. The index to this table has the semantics of
the MIB-2 ifIndex."
::= { if 4 }
ifMainEntry OBJECT-TYPE
SYNTAX IfMainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable
to a particular interface."
INDEX { ifMainIndex }
::= { ifMainTable 1 }
IfMainEntry ::=
SEQUENCE {
ifMainIndex InterfaceIndex,
ifMainPortName DisplayString
}
ifMainIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable."
::= { ifMainEntry 1 }
ifMainPortName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is used to assign a alias to a port"
::= { ifMainEntry 9 }
-- ----------------------------------------------------------------------------
-- } INSERT: cfa
-- ----------------------------------------------------------------------------
ibmnos OBJECT IDENTIFIER ::= { ibmnos-BladeSwitch 81 }
-- ----------------------------------------------------------------------------
-- { INSERT: bos
-- ----------------------------------------------------------------------------
-- ====================================================================
-- groups in the MIB
-- ====================================================================
ibmnosSystem OBJECT IDENTIFIER ::= { ibmnos 1 }
ibmnosConfigControl OBJECT IDENTIFIER ::= { ibmnos 2 }
-- ====================================================================
-- System Group
-- Configurtion Save related configuration / information
ibmnosConfigSaveOption OBJECT-TYPE
SYNTAX INTEGER {
noSave(1),
flashSave(2),
remoteTftpSave(3),
startupConfig(4),
backupConfig(5),
remoteTftpRestore(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the configurations of the switch has to be
saved or not.
The value 'noSave' specifies that the configurations need
not be saved.
The value 'flashSave' specifies that the configurations need
to be saved in flash in the specified file name issConfigSaveFileName.
The value 'remoteSave' specifies that the configurations need
to be saved in specified remote system.
The value 'startupConfig' specifies that the configurations need
to be saved in flash in the 'Startup Configuration File'.
The value 'backupConfig' specifies that the configurations need
to be saved in flash in the 'backup Configuration File'.
The value 'remoteTftpRestore' specifies that the configurations need
to be restored from remote system and saved in the file as indicated by
'ibmnosConfigRemoteType'. This configuration are copied to configuration blocks
and applied after restart."
DEFVAL { noSave }
::= { ibmnosSystem 10 }
ibmnosConfigSaveFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the file in which the switch configurations are
to be saved.
This object is valid only if 'issConfigSaveOption' is chosen
to be 'flashSave' or 'remoteSave'."
DEFVAL { "iss.conf" }
::= { ibmnosSystem 12 }
ibmnosInitiateConfigSave OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set as 'true' switch configurations save operation is
initiated.
As soon as the configuration save operation is completed, the value
of this object reverts back to 'false'.
All the configurations made via the three interfaces
viz.
-> commandline interface
-> Web Interface
-> SNMP interface
are saved either in 'Startup Configuration File' in the flash or
in the specified 'issConfigSaveFileName' in the flash or
in the chosen remote system, depending upon 'ConfigSaveOption'."
DEFVAL { false }
::= { ibmnosSystem 13 }
ibmnosConfigSaveStatus OBJECT-TYPE
SYNTAX INTEGER {
saveInProgress(1),
saveSuccessful(2),
saveFailed(3),
notInitiated(4),
saveNotRequired(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of configuration save operation."
DEFVAL { notInitiated }
::= { ibmnosSystem 14 }
ibmnosConfigRestoreOption OBJECT-TYPE
SYNTAX INTEGER {
factory(1),
activeConfig(2),
backupConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the switch configurations have to be restored
or not.
The value 'factory' specifies that the switch configurations
need not be restored when the system is restarted.
The value 'activeConfig' specifies that the configurations
need to be restored from the 'Startup Configuration File' in the flash
when the system is restarted.
The value 'backupConfig' specifies that the configurations
need to be restored from the 'Backup Configuration File' in the flash
when the system is restarted."
DEFVAL { factory }
::= { ibmnosSystem 15 }
ibmnosLoggingOption OBJECT-TYPE
SYNTAX INTEGER {
console(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Logging option specifying whether the logging is to be
done at console or to a file(system buffer) in the system."
::= { ibmnosSystem 26 }
-- Login Authentication mechanism
ibmnosLoginAuthentication OBJECT-TYPE
SYNTAX INTEGER {
local(1),
remoteRadius(2),
remoteTacacs(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mechanism by which the user login to access the GUI for
configuration has to be authenticated. Authentication is done
either locally or in the remote side through a RADIUS Server."
::= { ibmnosSystem 32 }
ibmnosConfigRestoreFileVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Config Restoration file version. This version will be compared in each
reboot against version stored in restoration file. Restoration
will occur only if the first field in restoration file is this OID and the
RestoreFileVersion value also matches."
::= { ibmnosSystem 40 }
-- Config Control Group
-- Port Control Table
ibmnosPortCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmnosPortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the port specific parameters of the device like speed,
duplex mode, etc."
::= { ibmnosConfigControl 2 }
ibmnosPortCtrlEntry OBJECT-TYPE
SYNTAX IbmnosPortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port."
INDEX { ibmnosPortCtrlIndex }
::= { ibmnosPortCtrlTable 1 }
IbmnosPortCtrlEntry ::=
SEQUENCE {
ibmnosPortCtrlIndex
Integer32,
ibmnosPortCtrlMode
INTEGER,
ibmnosPortCtrlDuplex
INTEGER,
ibmnosPortCtrlSpeed
INTEGER,
ibmnosPortCtrlFlowControl
INTEGER
}
ibmnosPortCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index of the port for which the configuration
in this entry applies."
::= { ibmnosPortCtrlEntry 1 }
ibmnosPortCtrlMode OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
noNegotiation (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Speficies the mode in which the speed, duplex modes and flow control
of the interface is determined.
If set as 'auto', the hardware senses speed and negotiates with the port
on the other end of the link for data transfer operation as
'full-duplex' or 'half-duplex' and about flow contol.
If set as 'nonegotiation', the configured values for interface
speed, duplex mode and flow control will be effective."
DEFVAL { auto }
::= { ibmnosPortCtrlEntry 2 }
ibmnosPortCtrlDuplex OBJECT-TYPE
SYNTAX INTEGER {
full (1),
half (2),
any (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface data transfer mode as full-duplex or half-duplex.
This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value 'any'"
::= { ibmnosPortCtrlEntry 3 }
ibmnosPortCtrlSpeed OBJECT-TYPE
SYNTAX INTEGER {
tenMBPS (1),
hundredMBPS (2),
oneGB (3),
tenGB (4),
any (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface speed.
This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value 'any'"
::= { ibmnosPortCtrlEntry 4 }
ibmnosPortCtrlFlowControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2),
send (3),
receive (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables / disables flow control for the interface.
This object be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negotiating with its peer"
::= { ibmnosPortCtrlEntry 5 }
-- ----------------------------------------------------------------------------
-- } INSERT: bos
-- ----------------------------------------------------------------------------
toraddon OBJECT IDENTIFIER ::= { ibmnos-BladeSwitch
102
}
-- ----------------------------------------------------------------------------
-- { INSERT: toraddon
-- ----------------------------------------------------------------------------
-- Module Group
--vlan OBJECT IDENTIFIER ::= { toraddon 1 }
cfa OBJECT IDENTIFIER ::= { toraddon 2 }
sys OBJECT IDENTIFIER ::= { toraddon 7 }
ibmnosFdb OBJECT IDENTIFIER ::= { toraddon 13 }
tor-switch OBJECT IDENTIFIER ::= { toraddon 14 }
ibmnosBladeHarmony OBJECT IDENTIFIER ::= { toraddon
18
}
-- Blade Harmony Wrapper Objects (bosBladeHarmony)
dataCollection OBJECT IDENTIFIER ::= { ibmnosBladeHarmony 1 }
imageConfigTransfer OBJECT IDENTIFIER ::= { ibmnosBladeHarmony 3 }
ibmnosFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmnosFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FDB entries."
::= { ibmnosFdb 5 }
ibmnosFdbEntry OBJECT-TYPE
SYNTAX IbmnosFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the FDB table"
INDEX { ibmnosFdbVlan, ibmnosFdbMacAddr }
::= { ibmnosFdbTable 1 }
IbmnosFdbEntry ::= SEQUENCE {
ibmnosFdbVlan Integer32,
ibmnosFdbMacAddr PhysAddress,
ibmnosFdbMacAddrStr DisplayString,
ibmnosFdbVlanId Integer32,
ibmnosFdbSrcPort Integer32,
ibmnosFdbSrcTrunk Integer32,
ibmnosFdbState INTEGER,
ibmnosFdbStatus Integer32,
ibmnosFdbClearMac INTEGER
}
ibmnosFdbVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID for the FDB entry."
::= { ibmnosFdbEntry 1 }
ibmnosFdbMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address for the FDB entry."
::= { ibmnosFdbEntry 2 }
ibmnosFdbMacAddrStr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address in hex format for the FDB entry. This node is added for
display purpose."
::={ ibmnosFdbEntry 3 }
ibmnosFdbVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID for the FDB entry. This node is added for display purpose."
::= { ibmnosFdbEntry 4 }
ibmnosFdbSrcPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been learned but that the bridge does have some
forwarding/filtering information about this address."
::= { ibmnosFdbEntry 5 }
ibmnosFdbSrcTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not associated with a trunk."
::= { ibmnosFdbEntry 6 }
ibmnosFdbState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
forward(2),
trunk(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address has been learned by the switch
trunk(3) : frames with this MAC address are forwarded to trunk
group"
::= { ibmnosFdbEntry 7 }
ibmnosFdbStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"'1' if it is permanent
'0' if it is not permanent"
::= { ibmnosFdbEntry 10 }
ibmnosFdbClearMac OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the corresponding table entry in FDB."
::= { ibmnosFdbEntry 11 }
-- Interface mangager(CFA) objects
ibmnosPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmnosPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port configuration in the new_configuration block."
::= { cfa 1 }
ibmnosPortCfgTableEntry OBJECT-TYPE
SYNTAX IbmnosPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port configuration table in the new_configuration block."
INDEX {ibmnosPortCfgIndx }
::= {ibmnosPortCfgTable 1 }
IbmnosPortCfgTableEntry ::= SEQUENCE {
ibmnosPortCfgIndx Integer32,
ibmnosPortCfgVlanTag INTEGER
}
ibmnosPortCfgIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the row in port configurations table."
::= { ibmnosPortCfgTableEntry 1 }
ibmnosPortCfgVlanTag OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN tag configured for the port"
::= { ibmnosPortCfgTableEntry 2 }
agImageForNextReset OBJECT-TYPE
SYNTAX INTEGER{
image1(2),
image2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2"
::= { sys 2 }
--- Switch Objects
hardwarePartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware part number of the Blade Switch."
::= { tor-switch 1 }
hardwareRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware revision. If the revision is not
available, a zero length string should be returned."
::= { tor-switch 2 }
hardwareLastBoot OBJECT-TYPE
SYNTAX INTEGER {
unkownReason(0),
powerCycle(1),
resetFromConsole(2),
resetFromTelnetOrSSH(3),
resetFromSNMP(4),
resetFromWEBUI(5),
resetFromScheduled(6),
resetFromWatchdogTimer(7),
resetFromSWPANIC(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reason of the last boot.
"
::= { tor-switch 3 }
hardwareMACAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address."
::= { tor-switch 4 }
hardwareSwitchRunningSwVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch software version."
::= { tor-switch 5 }
hardwareFlashConfiguration OBJECT-TYPE
SYNTAX INTEGER {
factory(0),
active(1),
backup(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active flash configuration."
::= { tor-switch 6 }
hardwarePCBAPartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PCBA part number."
::= { tor-switch 7 }
hardwareFABNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FAB Number"
::= { tor-switch 8 }
hardwareSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch serial number."
::= { tor-switch 9 }
hardwareManufacturingDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date of manufacturing."
::= { tor-switch 10 }
hwTemperatureSensor1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature sensor 1."
::= { tor-switch 11 }
hwTemperatureSensor2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature sensor 2."
::= { tor-switch 12 }
hwTemperatureSensor3 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature sensor 3."
::= { tor-switch 13 }
hwFan1RPMValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fan 1 RPM value."
::= { tor-switch 14 }
hwFan2RPMValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fan 2 RPM value."
::= { tor-switch 15 }
hwFan3RPMValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fan 3 RPM value."
::= { tor-switch 16 }
hwFan4RPMValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fan 4 RPM value."
::= { tor-switch 17 }
hwFan5RPMValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fan 5 RPM value."
::= { tor-switch 18 }
hwBoardRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Board revision number."
::= { tor-switch 19 }
hwPowerSupply1State OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
absent(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Power Supply 1 state."
::= { tor-switch 20 }
hwPowerSupply2State OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
absent(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Power Supply 2 state."
::= { tor-switch 21 }
ibmnosSfpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmnosSfpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of external port SFP information."
::= { tor-switch 22 }
ibmnosSfpInfoTableEntry OBJECT-TYPE
SYNTAX IbmnosSfpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the external port SFP information table."
INDEX { ibmnosSfpInfoIndx }
::= { ibmnosSfpInfoTable 1 }
IbmnosSfpInfoTableEntry ::= SEQUENCE {
ibmnosSfpInfoIndx Integer32,
ibmnosSfpInfoDescription INTEGER,
ibmnosSfpInfoSerialNumber DisplayString,
ibmnosSfpInfoPartNumber DisplayString,
ibmnosSfpInfoHWRevision DisplayString
}
ibmnosSfpInfoIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sfp Info index (port number)"
::= { ibmnosSfpInfoTableEntry 1 }
ibmnosSfpInfoDescription OBJECT-TYPE
SYNTAX INTEGER {
none(0),
sfp(1),
cx4(2),
sfpplus(3),
dac(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type Ethernet device (None(0), SFP(1), CX4(2), SFPplus(3), DAC(6))"
::= { ibmnosSfpInfoTableEntry 2 }
ibmnosSfpInfoSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial Number."
::= { ibmnosSfpInfoTableEntry 3 }
ibmnosSfpInfoPartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Part Number."
::= { ibmnosSfpInfoTableEntry 4 }
ibmnosSfpInfoHWRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hardware Revision"
::= { ibmnosSfpInfoTableEntry 5 }
swImage1Version OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Software image1 version"
::= { tor-switch 24 }
swImage2Version OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Software image2 version"
::= { tor-switch 25 }
swBootVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Software boot version"
::= { tor-switch 26 }
hwFan6RPMValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fan 6 RPM value."
::= { tor-switch 27 }
hwTemperatureSensor4 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature sensor 4."
::= { tor-switch 32 }
hwTemperatureSensor5 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature sensor 5."
::= { tor-switch 33 }
hwBootTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware system boot time ."
::= { tor-switch 42 }
-- Similar to ifAvailableIndex
ibmnosPortTableMaxEnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the port configuration host table."
::= { dataCollection 1 }
-- Similar to swImage1Version
ibmnosImage1Ver OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the software image stored in image 1 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid software image."
::= { dataCollection 3 }
-- Similar to swImage2Version
ibmnosImage2Ver OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the software image stored in image 2 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid software image."
::= { dataCollection 4 }
hwSwitchSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch software version."
::= { dataCollection 5 }
-- Similar to hwSerialNumber
hwSerialNum OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch serial number."
::= { dataCollection 6 }
-- Already addedd with different data type.
--hwLastBoot OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..48))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Time and reason of the last boot."
-- ::= { ibmnosBladeHarmony 7}
hwManufacturingDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date of manufacturing."
::= { dataCollection 7 }
-- Similar to issRestart
ibmnosReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reboot the agent.
other(1) is returned always when read."
::= { dataCollection 8 }
-- Similar to swBootVersion
ibmnosBootVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the boot code in the form of 'major.minor.bugfix'.
A zero length string is returned if version is not available."
::= { dataCollection 9 }
--Similar to ibmnosConfigRestoreOption
ibmnosConfigForNxtReset OBJECT-TYPE
SYNTAX INTEGER {
active(2),
backup(3),
default(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration information to be loaded from at next reset.
The following values are writable:
active(2)...active configuration block
backup(3)...backup configuration block
default(4)..default configuration block"
::= { dataCollection 10 }
ibmnosSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the software image that is currently running on the
system in the form of 'major.minor.maintenance.bugfix'. A zero
length string is returned if version is not available."
::= { dataCollection 11 }
agTftpServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TFTP server IP address or domain name."
::= { imageConfigTransfer 1 }
-- ----------------------------------------------------------------------------
-- } INSERT: g8000
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- } INSERT: blade
-- ----------------------------------------------------------------------------
END
Reference in New Issue View Git Blame Copy Permalink