800 lines
31 KiB
Plaintext
800 lines
31 KiB
Plaintext
VPLS-GENERIC-DRAFT-01-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
Unsigned32, Counter32, transmission
|
|
FROM SNMPv2-SMI -- RFC2578
|
|
|
|
OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF -- RFC2580
|
|
|
|
TruthValue, RowStatus, StorageType, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC -- RFC2579
|
|
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB -- RFC3411
|
|
|
|
jnxExperiment
|
|
FROM JUNIPER-SMI
|
|
|
|
-- PwIndexType
|
|
-- FROM PW-TC-STD-MIB
|
|
|
|
VPNIdOrZero
|
|
FROM VPN-TC-STD-MIB; -- RFC4265
|
|
|
|
jnxVplsGenericDraft01MIB MODULE-IDENTITY
|
|
LAST-UPDATED "201103261200Z" -- 26 March 2011 12:00:00 GMT
|
|
ORGANIZATION "Layer 2 Virtual Private Networks (L2VPN)
|
|
Working Group"
|
|
CONTACT-INFO
|
|
"
|
|
Thomas D. Nadeau
|
|
Email: tnadeau@cisco.com
|
|
|
|
The L2VPN Working Group (email distribution l2vpn@ietf.org,
|
|
http://www.ietf.org/html.charters/l2vpn-charter.html)
|
|
"
|
|
|
|
DESCRIPTION
|
|
"Copyright (C) The IETF Trust (2010). The initial
|
|
version of this MIB module was published in RFC XXXX.
|
|
-- RFC Editor: Please replace XXXX with RFC number & remove
|
|
-- this note.
|
|
|
|
For full legal notices see the RFC itself or see:
|
|
http://www.ietf.org/copyrights/ianamib.html
|
|
|
|
This MIB module contains generic managed object definitions
|
|
for Virtual Private LAN Services as in [RFC4762] and
|
|
[RFC4761]
|
|
|
|
This MIB module enables the use of any underlying PseudoWire
|
|
network."
|
|
|
|
-- Revision history.
|
|
REVISION
|
|
"201103261200Z" -- 26 March 2011 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Removed inline definition of VPNIdOrZero in favor
|
|
of importing the definition from VPN-TC-STD-MIB.
|
|
"
|
|
REVISION
|
|
"200608301200Z" -- 30 August 2006 12:00:00 GMT
|
|
DESCRIPTION
|
|
"Changes from previous version:
|
|
1) Moved LDP Specific information to VPLS-LDP-DRAFT-01-MIB
|
|
2) Created the vplsStatusTable to store status information.
|
|
3)
|
|
|
|
|
|
|
|
"
|
|
REVISION
|
|
"200606041200Z" -- 4 June 2006 12:00:00 GMT
|
|
DESCRIPTION "Initial version published as part of RFC YYYY."
|
|
-- RFC Editor: please replace YYYY with IANA assigned value, and
|
|
-- delete this note.
|
|
|
|
::= { jnxExperiment 8 }
|
|
|
|
-- RFC Editor: please replace XXXX with IANA assigne value, and
|
|
-- delete this note.
|
|
|
|
-- Top-level components of this MIB.
|
|
|
|
PwIndexType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Pseudowire Index. A unique value, greater than zero,
|
|
for each locally-defined PW for indexing
|
|
several MIB tables associated with the particular PW.
|
|
It is recommended that values are assigned contiguously
|
|
starting from 1. The value for each PW MUST remain
|
|
constant at least from one re-initialization
|
|
to the next re-initialization.
|
|
"
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
|
|
-- Vpls BGP Autodiscovery specific Textual Convention
|
|
|
|
JnxVplsBgpRouteDistinguisher ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Syntax for a route distinguisher. For a complete
|
|
definition of a route distinguisher, see [RFC4364].
|
|
For more details on use of a route distinguisher
|
|
for a VPLS service, see [RFC4761]"
|
|
REFERENCE
|
|
"[RFC4364]"
|
|
SYNTAX OCTET STRING(SIZE (0..256))
|
|
|
|
JnxVplsBgpRouteTarget ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Syntax for a route target. For a complete
|
|
definition of a route target, see [RFC4364]."
|
|
REFERENCE
|
|
"[RFC4364]"
|
|
SYNTAX OCTET STRING(SIZE (0..256))
|
|
|
|
JnxVplsBgpRouteTargetType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to define the type of a route target usage.
|
|
Route targets can be specified to be imported,
|
|
exported, or both. For a complete definition of a
|
|
route target, see [RFC4364]."
|
|
REFERENCE
|
|
"[RFC4364]"
|
|
SYNTAX INTEGER { import(1), export(2), both(3) }
|
|
|
|
-- Notifications
|
|
jnxVplsNotifications OBJECT IDENTIFIER
|
|
::= { jnxVplsGenericDraft01MIB 0 }
|
|
-- Tables, Scalars
|
|
jnxVplsObjects OBJECT IDENTIFIER
|
|
::= { jnxVplsGenericDraft01MIB 1 }
|
|
-- Conformance
|
|
jnxVplsConformance OBJECT IDENTIFIER
|
|
::= { jnxVplsGenericDraft01MIB 2 }
|
|
|
|
-- PW Virtual Connection Table
|
|
|
|
jnxVplsConfigIndexNext OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an appropriate value to be used
|
|
for jnxVplsConfigIndex when creating entries in the
|
|
jnxVplsConfigTable. The value 0 indicates that no
|
|
unassigned entries are available. To obtain the
|
|
value of jnxVplsConfigIndex for a new entry in the
|
|
jnxVplsConfigTable, the manager issues a management
|
|
protocol retrieval operation to obtain the current
|
|
value of jnxVplsConfigIndex. After each retrieval
|
|
operation, the agent should modify the value to
|
|
reflect the next unassigned index. After a manager
|
|
retrieves a value the agent will determine through
|
|
its local policy when this index value will be made
|
|
available for reuse."
|
|
::= { jnxVplsObjects 1 }
|
|
|
|
jnxVplsConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxVplsConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies information for configuring
|
|
and monitoring Virtual Private Lan Services(VPLS).
|
|
"
|
|
::= { jnxVplsObjects 2 }
|
|
|
|
jnxVplsConfigEntry OBJECT-TYPE
|
|
SYNTAX JnxVplsConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in this table represents a Virtual Private Lan
|
|
Service(VPLS) in a packet network. It is indexed by
|
|
jnxVplsConfigIndex, which uniquely identifies a single VPLS.
|
|
|
|
A row is created by the operator or by the agent if a
|
|
VPLS service is created by non-SNMP application or
|
|
due to autodiscovery process.
|
|
|
|
None of the read-create objects values can be
|
|
changed when jnxVplsConfigRowStatus is in the active(1)
|
|
state. Changes are allowed when the jnxVplsConfigRowStatus
|
|
is in notInService(2) or notReady(3) states only.
|
|
If the operator need to change one of the values
|
|
for an active row the jnxVplsConfigRowStatus should be
|
|
first changed to notInService(2), the objects may
|
|
be changed now, and later to active(1) in order to
|
|
re-initiate the signaling process with the new
|
|
values in effect.
|
|
"
|
|
INDEX { jnxVplsConfigIndex }
|
|
::= { jnxVplsConfigTable 1 }
|
|
|
|
JnxVplsConfigEntry ::=
|
|
SEQUENCE {
|
|
jnxVplsConfigIndex Unsigned32,
|
|
jnxVplsConfigName SnmpAdminString,
|
|
jnxVplsConfigDescr SnmpAdminString,
|
|
jnxVplsConfigAdminStatus INTEGER,
|
|
jnxVplsConfigMacLearning TruthValue,
|
|
jnxVplsConfigDiscardUnknownDest TruthValue,
|
|
jnxVplsConfigMacAging TruthValue,
|
|
jnxVplsConfigFwdFullHighWatermark Unsigned32,
|
|
jnxVplsConfigFwdFullLowWatermark Unsigned32,
|
|
|
|
jnxVplsConfigRowStatus RowStatus,
|
|
jnxVplsConfigMtu Unsigned32,
|
|
jnxVplsConfigVpnId VPNIdOrZero,
|
|
jnxVplsConfigServiceType INTEGER,
|
|
jnxVplsConfigStorageType StorageType
|
|
}
|
|
|
|
jnxVplsConfigIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1.. 2147483647)
|
|
-- MAX-ACCESS not-accessible
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique index for the conceptual row identifying
|
|
a VPLS service."
|
|
::= { jnxVplsConfigEntry 1 }
|
|
|
|
jnxVplsConfigName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual name of the VPLS.
|
|
If there is no local name, or this object is
|
|
otherwise not applicable, then this object MUST
|
|
contain a zero-length octet string."
|
|
DEFVAL { "" }
|
|
::= { jnxVplsConfigEntry 2 }
|
|
|
|
jnxVplsConfigDescr OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A textual string containing information about the
|
|
VPLS service. If there is no information for this VPLS
|
|
service, then this object MUST contain a zero-length
|
|
octet string."
|
|
DEFVAL { "" }
|
|
::= { jnxVplsConfigEntry 3 }
|
|
|
|
jnxVplsConfigAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
testing(3) -- in some test mode
|
|
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The desired administrative state of the VPLS
|
|
service. If the administrative status of the
|
|
Vpls service is changed to enable then this
|
|
service is able to utilize the pseudo wire to
|
|
perform the tasks of a VPLS service.
|
|
The testing(3) state indicates that no operational
|
|
packets can be passed. "
|
|
DEFVAL { down }
|
|
::= { jnxVplsConfigEntry 4 }
|
|
|
|
jnxVplsConfigMacLearning OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies if MAC Learning is enabled
|
|
in this service. If this object is true then Mac
|
|
Learning is enabled. If false, then Mac Learning is
|
|
disabled."
|
|
DEFVAL { true }
|
|
::= { jnxVplsConfigEntry 6 }
|
|
|
|
jnxVplsConfigDiscardUnknownDest OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the value of this object is 'true', then frames
|
|
received with an unknown destination MAC are discarded
|
|
in this VPLS. If 'false', then the packets are
|
|
processed."
|
|
DEFVAL { false }
|
|
::= { jnxVplsConfigEntry 7 }
|
|
|
|
jnxVplsConfigMacAging OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the value of this object is 'true'
|
|
then the MAC ageing process is enabled in
|
|
this VPLS. If 'false', then the MAC ageing process
|
|
is disabled"
|
|
DEFVAL { true }
|
|
::= { jnxVplsConfigEntry 8 }
|
|
|
|
jnxVplsConfigFwdFullHighWatermark OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
UNITS "percentage"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the utilization of the
|
|
forwarding database for this VPLS instance at
|
|
which the jnxVplsFwdFullAlarmRaised notification
|
|
will be sent."
|
|
DEFVAL { 95 }
|
|
::= { jnxVplsConfigEntry 10 }
|
|
|
|
jnxVplsConfigFwdFullLowWatermark OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
UNITS "percentage"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the utilization of the
|
|
forwarding database for this VPLS instance
|
|
at which the jnxVplsFwdFullAlarmCleared
|
|
notification will be sent."
|
|
DEFVAL { 90 }
|
|
::= { jnxVplsConfigEntry 11 }
|
|
|
|
jnxVplsConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For creating, modifying, and deleting this row.
|
|
None of the read-create objects in the
|
|
conceptual rows may be changed when this
|
|
object is in the active(1) state."
|
|
::= { jnxVplsConfigEntry 12 }
|
|
|
|
jnxVplsConfigMtu OBJECT-TYPE
|
|
SYNTAX Unsigned32 (64..1518)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object specifies the MTU of this
|
|
vpls instance."
|
|
DEFVAL { 1518 }
|
|
::= { jnxVplsConfigEntry 13 }
|
|
|
|
jnxVplsConfigVpnId OBJECT-TYPE
|
|
SYNTAX VPNIdOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects indicates the IEEE 802-1990
|
|
VPN ID of the associated VPLS service."
|
|
::= { jnxVplsConfigEntry 14 }
|
|
|
|
jnxVplsConfigServiceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
vlan (1),
|
|
ethernet (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object specifies the type of
|
|
service emulated by this vpls instance."
|
|
DEFVAL { vlan }
|
|
::= { jnxVplsConfigEntry 15 }
|
|
|
|
jnxVplsConfigStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the storage type for this row."
|
|
DEFVAL { volatile }
|
|
::= { jnxVplsConfigEntry 16 }
|
|
|
|
-- VPLS Status table
|
|
|
|
jnxVplsStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxVplsStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides information for monitoring
|
|
Virtual Private Lan Services(VPLS).
|
|
"
|
|
::= { jnxVplsObjects 3 }
|
|
|
|
jnxVplsStatusEntry OBJECT-TYPE
|
|
SYNTAX JnxVplsStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in this table represents a Virtual Private Lan
|
|
Service(VPLS) in a packet network. It is indexed by
|
|
jnxVplsConfigIndex, which uniquely identifies a single VPLS.
|
|
|
|
A row in this table is automatically created by the agent
|
|
when a VPLS service is configured.
|
|
"
|
|
INDEX { jnxVplsConfigIndex }
|
|
::= { jnxVplsStatusTable 1 }
|
|
|
|
JnxVplsStatusEntry ::=
|
|
SEQUENCE {
|
|
jnxVplsStatusOperStatus INTEGER,
|
|
jnxVplsStatusPeerCount Counter32
|
|
}
|
|
|
|
jnxVplsStatusOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(0),
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of this VPLS Service."
|
|
::= { jnxVplsStatusEntry 1 }
|
|
|
|
jnxVplsStatusPeerCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects specifies the number of peers
|
|
present in this vpls instance."
|
|
::= { jnxVplsStatusEntry 2 }
|
|
|
|
-- VPLS PW Binding Table
|
|
|
|
jnxVplsPwBindTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxVplsPwBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides an association between a
|
|
VPLS service and the corresponding Pseudo
|
|
Wires. A service can have more than one Pseudo
|
|
Wire association. Pseudo Wires are defined in
|
|
the pwTable"
|
|
::= { jnxVplsObjects 4 }
|
|
|
|
jnxVplsPwBindEntry OBJECT-TYPE
|
|
SYNTAX JnxVplsPwBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row represents an association between a
|
|
VPLS instance and one or more Pseudo Wires
|
|
defined in the pwTable. Each index is unique
|
|
in describing an entry in this table. However
|
|
both indexes are required to define the one
|
|
to many association of service to
|
|
pseudowire."
|
|
INDEX { jnxVplsConfigIndex, jnxVplsPwBindIndex }
|
|
::= { jnxVplsPwBindTable 1 }
|
|
|
|
JnxVplsPwBindEntry ::=
|
|
SEQUENCE {
|
|
jnxVplsPwBindConfigType INTEGER,
|
|
jnxVplsPwBindType INTEGER,
|
|
jnxVplsPwBindRowStatus RowStatus,
|
|
jnxVplsPwBindStorageType StorageType,
|
|
jnxVplsPwBindIndex PwIndexType
|
|
}
|
|
|
|
jnxVplsPwBindConfigType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
manual (1),
|
|
autodiscovery (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object indicates
|
|
whether the Pseudo Wire binding was created
|
|
manually or via autodiscovery.
|
|
|
|
The value of this object must be
|
|
specifed when the row is created and cannot
|
|
be changed while the row status is active(1)"
|
|
::= { jnxVplsPwBindEntry 1 }
|
|
|
|
jnxVplsPwBindType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mesh (1),
|
|
spoke (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object indicates
|
|
whether the Pseudo Wire binding is of
|
|
type mesh or spoke.
|
|
|
|
The value of this object must be
|
|
specifed when the row is created and cannot
|
|
be changed while the row status is active(1)"
|
|
::= { jnxVplsPwBindEntry 2 }
|
|
|
|
jnxVplsPwBindRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For creating, modifying, and deleting this row.
|
|
None of the read-create objects in the
|
|
conceptual rows may be changed when this
|
|
object is in the active(1) state"
|
|
::= { jnxVplsPwBindEntry 3 }
|
|
|
|
jnxVplsPwBindStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the storage type for this row."
|
|
DEFVAL { volatile }
|
|
::= { jnxVplsPwBindEntry 4 }
|
|
|
|
-- Joe Added xxx
|
|
jnxVplsPwBindIndex OBJECT-TYPE
|
|
SYNTAX PwIndexType
|
|
-- MAX-ACCESS not-accessible
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Secondary Index for the conceptual row identifying
|
|
a pseudowire within the PwEntry which MUST
|
|
match an entry from the PW-STD-MIB's PwTable
|
|
which represents an already-provisioned
|
|
pseudowire that is then associated with this
|
|
VPLS instance.
|
|
"
|
|
::= { jnxVplsPwBindEntry 5 }
|
|
|
|
-- jnxVplsBgpADConfigTable
|
|
|
|
jnxVplsBgpADConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxVplsBgpADConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies information for configuring
|
|
BGP Auto-discovery parameters for a given Vpls service.
|
|
"
|
|
::= { jnxVplsObjects 5 }
|
|
|
|
jnxVplsBgpADConfigEntry OBJECT-TYPE
|
|
SYNTAX JnxVplsBgpADConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in this table represents BGP based autodiscovery
|
|
is in use for this instance of Vpls.
|
|
A row in this table is indexed by jnxVplsConfigIndex, which
|
|
uniquely identifies a single VPLS.
|
|
None of the read-create objects can be changed when
|
|
jnxVplsBGPADConfigRowStatus is in active(1) state. Changes
|
|
are allowed when the jnxVplsBGPADConfigRowStatus is in
|
|
notInService(2) or notReady(3) states only.
|
|
If the operator need to change one of the values
|
|
for an active row the jnxVplsConfigRowStatus should be
|
|
first changed to notInService(2), the objects may
|
|
be changed now, and later to active(1) in order to
|
|
re-initiate the signaling process with the new
|
|
values in effect.
|
|
"
|
|
INDEX { jnxVplsConfigIndex }
|
|
::= { jnxVplsBgpADConfigTable 1 }
|
|
|
|
JnxVplsBgpADConfigEntry ::=
|
|
SEQUENCE {
|
|
jnxVplsBgpADConfigRouteDistinguisher JnxVplsBgpRouteDistinguisher,
|
|
jnxVplsBgpADConfigPrefix Unsigned32,
|
|
jnxVplsBgpADConfigVplsId JnxVplsBgpRouteDistinguisher,
|
|
jnxVplsBgpADConfigRowStatus RowStatus
|
|
}
|
|
|
|
jnxVplsBgpADConfigRouteDistinguisher OBJECT-TYPE
|
|
SYNTAX JnxVplsBgpRouteDistinguisher
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The route distinguisher for this VPLS. See [RFC4364]
|
|
for a complete definition of a route distinguisher.
|
|
for more details on use of a route distinguisher
|
|
for a VPLS service, see [RFC4761]
|
|
"
|
|
::= { jnxVplsBgpADConfigEntry 1 }
|
|
|
|
jnxVplsBgpADConfigPrefix OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" In case of auto-discovery the default prefix advertised
|
|
is the ip address of the loopback. In case the user wants
|
|
to override the loopback address, jnxVplsBgpADConfigPrefix
|
|
should be set. When this value if non-zero it is used
|
|
as the advertised IP address in the NLRI.
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { jnxVplsBgpADConfigEntry 2 }
|
|
|
|
jnxVplsBgpADConfigVplsId OBJECT-TYPE
|
|
SYNTAX JnxVplsBgpRouteDistinguisher
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" VplsId is a unique identifier for all VSIs belonging to
|
|
the same VPLS. It is advertised as an extended community
|
|
"
|
|
::= { jnxVplsBgpADConfigEntry 3 }
|
|
|
|
jnxVplsBgpADConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" For creating, modifying, and deleting this row.
|
|
None of the read-create objects in the
|
|
conceptual rows may be changed when this
|
|
object is in the active(1) state.
|
|
"
|
|
::= { jnxVplsBgpADConfigEntry 4 }
|
|
|
|
|
|
-- jnxVplsBgpRteTargetTable
|
|
|
|
jnxVplsBgpRteTargetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JnxVplsBgpRteTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This table specifies the list of Route Targets
|
|
imported or exported by BGP during auto-discovery of VPLS.
|
|
"
|
|
::= { jnxVplsObjects 6 }
|
|
|
|
jnxVplsBgpRteTargetEntry OBJECT-TYPE
|
|
SYNTAX JnxVplsBgpRteTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table specifies the value of the
|
|
Route Target being used by BGP. Depending on the value
|
|
of jnxVplsBgpRteTargetType an RT might be exported or
|
|
imported or both. Every VPLS which
|
|
uses auto-discovery for finding peer nodes can import and
|
|
export multiple Route Targets. This representation allows
|
|
support for hierarchical VPLS.
|
|
"
|
|
INDEX { jnxVplsConfigIndex, jnxVplsBgpRteTargetIndex }
|
|
::= { jnxVplsBgpRteTargetTable 1 }
|
|
|
|
JnxVplsBgpRteTargetEntry ::=
|
|
SEQUENCE {
|
|
jnxVplsBgpRteTargetIndex Unsigned32,
|
|
jnxVplsBgpRteTargetRTType JnxVplsBgpRouteTargetType,
|
|
jnxVplsBgpRteTargetRT JnxVplsBgpRouteTarget,
|
|
jnxVplsBgpRteTargetRTRowStatus RowStatus
|
|
}
|
|
|
|
jnxVplsBgpRteTargetIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This index along with jnxVplsConfigIndex,identifies one entry
|
|
in the jnxVplsBgpRteTargetTable. By keeping jnxVplsConfigIndex
|
|
constant and using new value of jnxVplsBgpRteTargetIndex user
|
|
can configure multiple Route Targets for the same Vpls.
|
|
"
|
|
::= { jnxVplsBgpRteTargetEntry 1 }
|
|
|
|
jnxVplsBgpRteTargetRTType OBJECT-TYPE
|
|
SYNTAX JnxVplsBgpRouteTargetType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Used to define the type of a route target usage.
|
|
Route targets can be specified to be imported,
|
|
exported, or both. For a complete definition of a
|
|
route target, see [RFC4364].
|
|
"
|
|
::= { jnxVplsBgpRteTargetEntry 2 }
|
|
|
|
jnxVplsBgpRteTargetRT OBJECT-TYPE
|
|
SYNTAX JnxVplsBgpRouteTarget
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The route target associated with the VPLS service.
|
|
For more details on use of route targets
|
|
for a VPLS service, see [RFC4761]
|
|
"
|
|
::= { jnxVplsBgpRteTargetEntry 3 }
|
|
|
|
jnxVplsBgpRteTargetRTRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table. When a row in this
|
|
table is in active(1) state, no objects in that row
|
|
can be modified
|
|
"
|
|
::= { jnxVplsBgpRteTargetEntry 4 }
|
|
|
|
jnxVplsStatusNotifEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this object is set to true(1), then it enables
|
|
the emission of jnxVplsStatusChanged
|
|
notification; otherwise this notification is not
|
|
emitted."
|
|
REFERENCE
|
|
"See also [RFC3413] for explanation that
|
|
notifications are under the ultimate control of the
|
|
MIB module in this document."
|
|
DEFVAL { false }
|
|
::= { jnxVplsObjects 7 }
|
|
|
|
jnxVplsNotificationMaxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the maximum number of
|
|
notifications issued per second. If events occur
|
|
more rapidly, the implementation may simply fail to
|
|
emit these notifications during that period, or may
|
|
queue them until an appropriate time. A value of 0
|
|
means no throttling is applied and events may be
|
|
notified at the rate at which they occur."
|
|
DEFVAL { 0 }
|
|
::= { jnxVplsObjects 8 }
|
|
|
|
-- VPLS Service Notifications
|
|
|
|
jnxVplsStatusChanged NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
jnxVplsConfigVpnId,
|
|
jnxVplsConfigAdminStatus,
|
|
jnxVplsStatusOperStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The jnxVplsStatusChanged notification is generated
|
|
when there is a change in the administrative or
|
|
operating status of a VPLS service."
|
|
::= { jnxVplsNotifications 1 }
|
|
|
|
jnxVplsFwdFullAlarmRaised NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
jnxVplsConfigVpnId,
|
|
jnxVplsConfigFwdFullHighWatermark,
|
|
jnxVplsConfigFwdFullLowWatermark
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The jnxVplsFwdFullAlarmRaised notification is
|
|
generated when the utilization of the Forwarding
|
|
database is above the value specified by
|
|
jnxVplsConfigFwdFullHighWatermark."
|
|
::= { jnxVplsNotifications 2 }
|
|
|
|
jnxVplsFwdFullAlarmCleared NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
jnxVplsConfigVpnId,
|
|
jnxVplsConfigFwdFullHighWatermark,
|
|
jnxVplsConfigFwdFullLowWatermark
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The jnxVplsFwdFullAlarmCleared notification is
|
|
generated when the utilization of the Forwarding
|
|
database is below the value specified by
|
|
jnxVplsConfigFwdFullLowWatermark."
|
|
::= { jnxVplsNotifications 3 }
|
|
|
|
END
|