803 lines
27 KiB
Plaintext
803 lines
27 KiB
Plaintext
|
|
-- *****************************************************************************
|
|
-- Juniper-DS3-MIB
|
|
--
|
|
-- Juniper Networks Enterprise MIB
|
|
-- DS3 MIB
|
|
--
|
|
-- Copyright (c) 1998, 1999 Redstone Communications, Inc.
|
|
-- Copyright (c) 1999, 2002 Unisphere Networks, Inc.
|
|
-- Copyright (c) 2002, 2003 Juniper Networks, Inc.
|
|
-- All Rights Reserved.
|
|
-- *****************************************************************************
|
|
|
|
Juniper-DS3-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
ifIndex, InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
TruthValue, RowStatus, DisplayString
|
|
FROM SNMPv2-TC
|
|
JuniNextIfIndex
|
|
FROM Juniper-TC
|
|
juniMibs
|
|
FROM Juniper-MIBs
|
|
PerfCurrentCount, PerfIntervalCount, PerfTotalCount
|
|
FROM PerfHist-TC-MIB
|
|
dsx3FarEndCurrentEntry, dsx3FarEndIntervalEntry, dsx3FarEndTotalEntry,
|
|
dsx3FarEndConfigEntry
|
|
FROM DS3-MIB;
|
|
|
|
juniDs3MIB MODULE-IDENTITY
|
|
LAST-UPDATED "200309301211Z" -- 30-Sep-03 08:11 AM EDT
|
|
ORGANIZATION "Juniper Networks, Inc."
|
|
CONTACT-INFO
|
|
" Juniper Networks, Inc.
|
|
Postal: 10 Technology Park Drive
|
|
Westford, MA 01886-3146
|
|
USA
|
|
Tel: +1 978 589 5800
|
|
E-mail: mib@Juniper.net"
|
|
DESCRIPTION
|
|
"The DS3 MIB for the Juniper Networks enterprise. This MIB contains
|
|
managed objects for DS3/E3 interfaces. Management objects are provided
|
|
to supplement those found in the standard DS3-MIB (RFC 2496)."
|
|
-- Revision History
|
|
REVISION "200410120651Z" -- 12-Oct-04 01:51 AM EST - RX 5.0.4
|
|
DESCRIPTION
|
|
"Changed the upper bound value of juniDsx3LineLength from 64000 to 137
|
|
meters."
|
|
REVISION "200309301211Z" -- 30-Sep-03 08:11 AM EDT - JUNOSe 5.3
|
|
DESCRIPTION
|
|
"Changed the standard MIB support from the RFC1407-MIB (SMIv1) to the
|
|
DS3-MIB (SMIv2)."
|
|
REVISION "200209162144Z" -- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0
|
|
DESCRIPTION
|
|
"Replaced Unisphere names with Juniper names."
|
|
REVISION "200209121659Z" -- 12-Sep-02 12:59 PM EDT - JUNOSe 4.1
|
|
DESCRIPTION
|
|
"Added support for far end MDL generator number and port number.
|
|
Added support for far end MDL carrier."
|
|
REVISION "200204041407Z" -- 04-Apr-02 09:07 AM EST - JUNOSe 4.0
|
|
DESCRIPTION
|
|
"Added invalid seconds objects to the far end statistics tables and more
|
|
configuration objects."
|
|
REVISION "200202222121Z" -- 22-Feb-02 04:21 PM EST - JUNOSe 3.3
|
|
DESCRIPTION
|
|
"Modified the valid range for juniDsx3Ds3Channel"
|
|
REVISION "200104271949Z" -- 27-Apr-01 03:49 PM EDT - JUNOSe 3.0
|
|
DESCRIPTION
|
|
"Added dynamic DS3 interface support."
|
|
REVISION "200102050000Z" -- 05-Feb-01 - JUNOSe 2.6
|
|
DESCRIPTION
|
|
"Added following objects:
|
|
juniDsx3Ds3DsuMode
|
|
juniDsx3Ds3BandwidthLimit
|
|
juniDsx3Ds3DsuScrambleMode"
|
|
REVISION "9907270000Z" -- 27-Jul-99 - JUNOSe 1.1
|
|
DESCRIPTION
|
|
"Added juniDsx3LineType and juniDsx3CellScramblerConfig."
|
|
REVISION "9811130000Z" -- 13-Nov-98 - JUNOSe 1.0
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { juniMibs 4 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Managed objects
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniDs3Objects OBJECT IDENTIFIER ::= { juniDs3MIB 1 }
|
|
|
|
|
|
-- /////////////////////////////////////////////////////////////////////////////
|
|
--
|
|
-- DS3 Interfaces
|
|
--
|
|
-- /////////////////////////////////////////////////////////////////////////////
|
|
--
|
|
-- The DS3 Configuration Table
|
|
--
|
|
juniDsx3ConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniDsx3ConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains entries for DS3/E3 interfaces present in the
|
|
system."
|
|
::= { juniDs3Objects 1 }
|
|
|
|
juniDsx3ConfigEntry OBJECT-TYPE
|
|
SYNTAX JuniDsx3ConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry describes the characteristics of an DS3/E3 interface."
|
|
INDEX { ifIndex }
|
|
::= { juniDsx3ConfigTable 1 }
|
|
|
|
JuniDsx3ConfigEntry ::= SEQUENCE {
|
|
juniDsx3LineLength Integer32,
|
|
juniDsx3LineType INTEGER,
|
|
juniDsx3CellScramblerConfig INTEGER,
|
|
juniDsx3Channelization TruthValue,
|
|
juniDsx3InterfaceType INTEGER,
|
|
juniDsx3Application INTEGER,
|
|
juniDsx3Ds3Channel INTEGER,
|
|
juniDsx3LowerIfIndex InterfaceIndexOrZero,
|
|
juniDsx3RowStatus RowStatus,
|
|
juniDsx3Ds3DsuMode INTEGER,
|
|
juniDsx3Ds3BandwidthLimit INTEGER,
|
|
juniDsx3Ds3DsuScrambleMode INTEGER,
|
|
juniDsx3MdlCarrier INTEGER,
|
|
juniDsx3MdlTransmit INTEGER,
|
|
juniDsx3MdlEic DisplayString,
|
|
juniDsx3MdlLic DisplayString,
|
|
juniDsx3MdlFic DisplayString,
|
|
juniDsx3MdlUnit DisplayString,
|
|
juniDsx3MdlPfi DisplayString,
|
|
juniDsx3MdlPort DisplayString,
|
|
juniDsx3MdlGenerator DisplayString }
|
|
|
|
juniDsx3LineLength OBJECT-TYPE
|
|
SYNTAX Integer32 (0..137)
|
|
UNITS "meters"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of the DS3/E3 line in meters. This objects provides
|
|
information for line build out circuitry. This object is only useful if
|
|
the interface has configurable line build out circuitry."
|
|
::= { juniDsx3ConfigEntry 1 }
|
|
|
|
juniDsx3LineType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
juniDsx3other(1),
|
|
juniDsx3M23(2),
|
|
juniDsx3SYNTRAN(3),
|
|
juniDsx3CbitParity(4),
|
|
juniDsx3ClearChannel(5),
|
|
juniE3G832(6),
|
|
juniE3Framed(7),
|
|
juniE3Plcp(8),
|
|
juniDsx3M23Plcp(18),
|
|
juniDsx3CbitParityPlcp(20) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the variety of DS3 C-bit or E3 application
|
|
implementing this interface. The type of interface affects the
|
|
interpretation of the usage and error statistics. The rate of DS3 is
|
|
44.736 Mbps and E3 is 34.368 Mbps. The dsx3ClearChannel value means
|
|
that the C-bits are not used except for sending/receiving AIS. Note
|
|
that this object represents the actual line type when the corresponding
|
|
value of dsx3LineType is dsx3other(1).
|
|
|
|
The values, in sequence, describe:
|
|
TITLE: SPECIFICATION:
|
|
dsx3M23 ANSI T1.107-1988
|
|
dsx3SYNTRAN ANSI T1.107-1988
|
|
dsx3CbitParity ANSI T1.107a-1989
|
|
dsx3ClearChannel ANSI T1.102-1987
|
|
e3G832 ITU-T G.832
|
|
e3Framed ITU-T G.751
|
|
e3Plcp ETSI T/NA(91)18.
|
|
dsx3M23Plcp ATM Forum af-phy-0054.000
|
|
dsx3CbitParityPlcp ATM Forum af-phy-0054.000 "
|
|
::= { juniDsx3ConfigEntry 2 }
|
|
|
|
juniDsx3CellScramblerConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
scramblerOn(1),
|
|
scramblerOff(2),
|
|
notSupported(3) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the state of the ATM cell scrambler for
|
|
interfaces which support ATM over DS3 or E3. For interfaces which do
|
|
not support ATM, this object returns the value notSupported(3)."
|
|
::= { juniDsx3ConfigEntry 3 }
|
|
|
|
juniDsx3Channelization OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The channelization setting for this DS3 interface; true(1) indicates
|
|
channelization, false(2) indicates no channelization."
|
|
::= { juniDsx3ConfigEntry 4 }
|
|
|
|
juniDsx3InterfaceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ds3T3(0),
|
|
ds3E3(1) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS3 interface type setting."
|
|
::= { juniDsx3ConfigEntry 5 }
|
|
|
|
juniDsx3Application OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ds3FrameOverDs3(0),
|
|
ds3AtmOverDs3(1) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface application setting."
|
|
::= { juniDsx3ConfigEntry 6 }
|
|
|
|
juniDsx3Ds3Channel OBJECT-TYPE
|
|
SYNTAX INTEGER (1..28)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DS3 channel setting. The range of channel settings depends on the
|
|
line rate of the underlying interface."
|
|
::= { juniDsx3ConfigEntry 7 }
|
|
|
|
juniDsx3LowerIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex of the interface over which this DS3 interface is to be
|
|
layered. A value of zero indicates no layering. An implementation may
|
|
choose to require that a nonzero value be configured at entry creation."
|
|
::= { juniDsx3ConfigEntry 8 }
|
|
|
|
juniDsx3RowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls creation/deletion of entries in this table according to the
|
|
RowStatus textual convention, constrained to support setting the
|
|
following values only:
|
|
createAndGo
|
|
destroy
|
|
|
|
To create an entry in this table, the following entry objects MUST be
|
|
explicitly configured:
|
|
juniDsx3RowStatus
|
|
juniDsx3LowerIfIndex
|
|
|
|
In addition, when creating an entry the following conditions must hold:
|
|
|
|
A value for ifIndex must have been determined previously, by reading
|
|
juniDsx3NextIfIndex.
|
|
|
|
The interface identified by juniDsx3LowerIfIndex must exist.
|
|
|
|
A corresponding entry in ifTable/ifXTable/juniIfTable is created/
|
|
destroyed as a result of creating/destroying an entry in this table."
|
|
::= { juniDsx3ConfigEntry 9 }
|
|
|
|
juniDsx3Ds3DsuMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ds3DsuModeNone(0),
|
|
ds3DsuLarsCom(2),
|
|
ds3DsuDigitalLink(4) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSU configuration setting for this entry."
|
|
DEFVAL { ds3DsuModeNone }
|
|
::= { juniDsx3ConfigEntry 10 }
|
|
|
|
juniDsx3Ds3BandwidthLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..44210)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSU bandwidth configuration for this entry."
|
|
DEFVAL { 0 }
|
|
::= { juniDsx3ConfigEntry 11 }
|
|
|
|
juniDsx3Ds3DsuScrambleMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ds3DsuScrambleDisabled(0),
|
|
ds3DsuScrambleEnable(1) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DSU scramble mode setting for this entry."
|
|
DEFVAL { ds3DsuScrambleDisabled }
|
|
::= { juniDsx3ConfigEntry 12 }
|
|
|
|
juniDsx3MdlCarrier OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the interface is used in carrier environment."
|
|
DEFVAL { disabled }
|
|
::= { juniDsx3ConfigEntry 13 }
|
|
|
|
juniDsx3MdlTransmit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
path(1),
|
|
idlesignal(2),
|
|
pathIdlesignal(3),
|
|
testsignal(4),
|
|
pathTestsignal(5),
|
|
idlesignalTestsignal(6),
|
|
pathIdlesignalTestsignal(7),
|
|
none(8) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies transmission enabling."
|
|
DEFVAL { none }
|
|
::= { juniDsx3ConfigEntry 14 }
|
|
|
|
juniDsx3MdlEic OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..10))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the equipment identification code."
|
|
DEFVAL { "" }
|
|
::= { juniDsx3ConfigEntry 15 }
|
|
|
|
juniDsx3MdlLic OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..11))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the location identification code."
|
|
DEFVAL { "" }
|
|
::= { juniDsx3ConfigEntry 16 }
|
|
|
|
juniDsx3MdlFic OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..10))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the frame identification code."
|
|
DEFVAL { "" }
|
|
::= { juniDsx3ConfigEntry 17 }
|
|
|
|
juniDsx3MdlUnit OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..6))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the unit identification code."
|
|
::= { juniDsx3ConfigEntry 18 }
|
|
|
|
juniDsx3MdlPfi OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..38))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the facility identification code to send in the MDL path
|
|
message."
|
|
DEFVAL { "" }
|
|
::= { juniDsx3ConfigEntry 19 }
|
|
|
|
juniDsx3MdlPort OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..38))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the equipment port number to send in the MDL idle signal
|
|
message."
|
|
::= { juniDsx3ConfigEntry 20 }
|
|
|
|
juniDsx3MdlGenerator OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..38))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the generator number to send in the MDL test signal message."
|
|
::= { juniDsx3ConfigEntry 21 }
|
|
|
|
|
|
juniDs3NextIfIndex OBJECT-TYPE
|
|
SYNTAX JuniNextIfIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Coordinate ifIndex value allocation for entries in juniDsx3ConfigTable.
|
|
|
|
A GET of this object returns the next available ifIndex value to be used
|
|
to create an entry in the associated interface table; or zero, if no
|
|
valid ifIndex value is available. This object also returns a value of
|
|
zero when it is the lexicographic successor of a varbind presented in an
|
|
SNMP GETNEXT or GETBULK request, for which circumstance it is assumed
|
|
that ifIndex allocation is unintended.
|
|
|
|
Successive GETs will typically return different values, thus avoiding
|
|
collisions among cooperating management clients seeking to create table
|
|
entries simultaneously."
|
|
::= { juniDs3Objects 2 }
|
|
|
|
|
|
--
|
|
-- The DS3 Far End Current
|
|
--
|
|
-- The DS3 Far End current table contains statistics being
|
|
-- collected for the current 15 minute interval.
|
|
--
|
|
juniDsx3FarEndCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniDsx3FarEndCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains entries for DS3/E3 interfaces present in the
|
|
system."
|
|
::= { juniDs3Objects 3 }
|
|
|
|
juniDsx3FarEndCurrentEntry OBJECT-TYPE
|
|
SYNTAX JuniDsx3FarEndCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry describes the characteristics of an DS3/E3 interface."
|
|
AUGMENTS { dsx3FarEndCurrentEntry }
|
|
::= { juniDsx3FarEndCurrentTable 1 }
|
|
|
|
JuniDsx3FarEndCurrentEntry ::= SEQUENCE {
|
|
juniDsx3FarEndCurrentInvalidSeconds PerfCurrentCount }
|
|
|
|
juniDsx3FarEndCurrentInvalidSeconds OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Invalid Seconds encountered
|
|
by a DS3/E3 interface in the current 15 minute interval."
|
|
::= { juniDsx3FarEndCurrentEntry 1 }
|
|
|
|
|
|
--
|
|
-- the DS3 Far End Interval
|
|
-- The DS3 Far End Interval Table contains statistics collected by each DS3
|
|
-- Interface over the previous 24 hours of operation. The past 24 hours are
|
|
-- broken into 96 completed 15 minute intervals.
|
|
--
|
|
juniDsx3FarEndIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniDsx3FarEndIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains entries for DS3/E3 interfaces present in the
|
|
system."
|
|
::= { juniDs3Objects 4 }
|
|
|
|
juniDsx3FarEndIntervalEntry OBJECT-TYPE
|
|
SYNTAX JuniDsx3FarEndIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry describes the characteristics of an DS3/E3 interface."
|
|
AUGMENTS { dsx3FarEndIntervalEntry }
|
|
::= { juniDsx3FarEndIntervalTable 1 }
|
|
|
|
JuniDsx3FarEndIntervalEntry ::= SEQUENCE {
|
|
juniDsx3FarEndIntervalInvalidSeconds PerfIntervalCount }
|
|
|
|
juniDsx3FarEndIntervalInvalidSeconds OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Invalid Seconds encountered
|
|
by a DS3/E3 interface in one of the previous 96 individual 15 minute
|
|
intervals."
|
|
::= { juniDsx3FarEndIntervalEntry 1 }
|
|
|
|
|
|
--
|
|
-- the DS3 Far End Total
|
|
-- The DS3 Far End Total Table contains the cumulative sum of the
|
|
-- statistics for the 24 hour period preceding the current interval.
|
|
--
|
|
juniDsx3FarEndTotalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniDsx3FarEndTotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains entries for DS3/E3 interfaces present in the
|
|
system."
|
|
::= { juniDs3Objects 5 }
|
|
|
|
juniDsx3FarEndTotalEntry OBJECT-TYPE
|
|
SYNTAX JuniDsx3FarEndTotalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry describes the characteristics of an DS3/E3 interface."
|
|
AUGMENTS { dsx3FarEndTotalEntry }
|
|
::= { juniDsx3FarEndTotalTable 1 }
|
|
|
|
JuniDsx3FarEndTotalEntry ::= SEQUENCE {
|
|
juniDsx3FarEndTotalInvalidSeconds PerfTotalCount }
|
|
|
|
juniDsx3FarEndTotalInvalidSeconds OBJECT-TYPE
|
|
SYNTAX PerfTotalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Invalid Seconds encountered
|
|
by a DS3/E3 interface in the previous 24 hour interval."
|
|
::= { juniDsx3FarEndTotalEntry 1 }
|
|
|
|
|
|
--
|
|
-- The DS3 Far End Configuration Table
|
|
--
|
|
-- The DS3 Far End Configuration Table contains
|
|
-- configuration information
|
|
-- reported in the C-bits from the remote end.
|
|
|
|
juniDsx3FarEndConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniDsx3FarEndConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains entries for DS3/E3 interfaces present in the
|
|
system."
|
|
::= { juniDs3Objects 6 }
|
|
|
|
juniDsx3FarEndConfigEntry OBJECT-TYPE
|
|
SYNTAX JuniDsx3FarEndConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry describes the far end configuration characteristics of an
|
|
DS3/E3 interface."
|
|
AUGMENTS { dsx3FarEndConfigEntry }
|
|
::= { juniDsx3FarEndConfigTable 1 }
|
|
|
|
JuniDsx3FarEndConfigEntry ::= SEQUENCE {
|
|
juniDsx3FarEndPortNumber DisplayString,
|
|
juniDsx3FarEndGeneratorNumber DisplayString,
|
|
juniDsx3FarEndCarrier INTEGER }
|
|
|
|
juniDsx3FarEndPortNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..38))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This code identifies the port number of the Far End DS3. It is sent
|
|
within the Idle Signal Message."
|
|
::= { juniDsx3FarEndConfigEntry 1 }
|
|
|
|
juniDsx3FarEndGeneratorNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..38))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This code identifies the Far End DS3 Generator Number. It is sent
|
|
within the Test Signal Message."
|
|
::= { juniDsx3FarEndConfigEntry 2 }
|
|
|
|
juniDsx3FarEndCarrier OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(0),
|
|
enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the interface is used in carrier environment. It is sent
|
|
with MDL messages."
|
|
::= { juniDsx3FarEndConfigEntry 3 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Notifications
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- No notifications are defined in this MIB. Placeholders follow.
|
|
-- juniDs3TrapControl OBJECT IDENTIFIER ::= { juniDs3MIB 2 }
|
|
-- juniDs3Traps OBJECT IDENTIFIER ::= { juniDs3MIB 3 }
|
|
-- juniDs3TrapPrefix OBJECT IDENTIFIER ::= { juniDs3Traps 0 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Conformance information
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniDs3Conformance OBJECT IDENTIFIER ::= { juniDs3MIB 4 }
|
|
juniDs3Compliances OBJECT IDENTIFIER ::= { juniDs3Conformance 1 }
|
|
juniDs3Groups OBJECT IDENTIFIER ::= { juniDs3Conformance 2 }
|
|
|
|
--
|
|
-- compliance statements
|
|
--
|
|
juniDs3Compliance MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete compliance statement for entities which implement the Juniper
|
|
DS3/E3 MIB. This statement became obsolete when support was added for
|
|
line type and cell scrambler objects."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniDs3Group }
|
|
::= { juniDs3Compliances 1 } -- JUNOSe 1.0
|
|
|
|
juniDs3Compliance2 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete compliance statement for entities which implement the Juniper
|
|
DS3/E3 MIB. This statement became obsolete when support was added for
|
|
DSU objects."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniDs3Group2 }
|
|
::= { juniDs3Compliances 2 } -- JUNOSe 1.1
|
|
|
|
juniDs3Compliance3 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete compliance statement for entities which implement the Juniper
|
|
DS3/E3 MIB. This statement became obsolete when support was added for
|
|
dynamic DS3 interface objects."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniDs3Group3 }
|
|
::= { juniDs3Compliances 3 } -- JUNOSe 2.6
|
|
|
|
juniDs3Compliance4 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete compliance statement for entities which implement the Juniper
|
|
DS3/E3 MIB. This statement became obsolete when far end invalid seconds
|
|
objects and more configuration objects were added."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniDs3Group4 }
|
|
::= { juniDs3Compliances 4 } -- JUNOSe 3.0
|
|
|
|
juniDs3Compliance5 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete compliance statement for entities which implement the Juniper
|
|
DS3/E3 MIB. This statement became obsolete when support was added for
|
|
far end generator number, port number and carrier."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniDs3Group5,
|
|
juniDs3FarEndGroup }
|
|
::= { juniDs3Compliances 5 } -- JUNOSe 4.0
|
|
|
|
juniDs3Compliance6 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the Juniper
|
|
DS3/E3 MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniDs3Group5,
|
|
juniDs3FarEndGroup2 }
|
|
::= { juniDs3Compliances 6 } -- JUNOSe 4.1
|
|
|
|
--
|
|
-- units of conformance
|
|
--
|
|
juniDs3Group OBJECT-GROUP
|
|
OBJECTS {
|
|
juniDsx3LineLength }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete collection of objects providing management of DS3/E3
|
|
interfaces in a Juniper product. This group became obsolete when
|
|
support was added for line type and cell scrambler objects."
|
|
::= { juniDs3Groups 1 }
|
|
|
|
juniDs3Group2 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniDsx3LineLength,
|
|
juniDsx3LineType,
|
|
juniDsx3CellScramblerConfig }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete collection of objects providing management of DS3/E3
|
|
interfaces in a Juniper product. This group became obsolete when
|
|
support was added for DSU configuration objects."
|
|
::= { juniDs3Groups 2 }
|
|
|
|
juniDs3Group3 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniDsx3LineLength,
|
|
juniDsx3LineType,
|
|
juniDsx3CellScramblerConfig,
|
|
juniDsx3Ds3DsuMode,
|
|
juniDsx3Ds3BandwidthLimit,
|
|
juniDsx3Ds3DsuScrambleMode }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete collection of objects providing management of DS3/E3
|
|
interfaces in a Juniper product. This group became obsolete when
|
|
support was added for dynamic DS3 interface objects."
|
|
::= { juniDs3Groups 3 }
|
|
|
|
juniDs3Group4 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniDsx3LineLength,
|
|
juniDsx3LineType,
|
|
juniDsx3CellScramblerConfig,
|
|
juniDsx3Channelization,
|
|
juniDsx3InterfaceType,
|
|
juniDsx3Application,
|
|
juniDsx3Ds3Channel,
|
|
juniDsx3LowerIfIndex,
|
|
juniDsx3RowStatus,
|
|
juniDsx3Ds3DsuMode,
|
|
juniDsx3Ds3BandwidthLimit,
|
|
juniDsx3Ds3DsuScrambleMode,
|
|
|
|
juniDs3NextIfIndex }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete collection of objects providing management of DS3/E3
|
|
interfaces in a Juniper product. This group became obsolete when more
|
|
configuration objects were added."
|
|
::= { juniDs3Groups 4 }
|
|
|
|
juniDs3Group5 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniDsx3LineLength,
|
|
juniDsx3LineType,
|
|
juniDsx3CellScramblerConfig,
|
|
juniDsx3Channelization,
|
|
juniDsx3InterfaceType,
|
|
juniDsx3Application,
|
|
juniDsx3Ds3Channel,
|
|
juniDsx3LowerIfIndex,
|
|
juniDsx3RowStatus,
|
|
juniDsx3Ds3DsuMode,
|
|
juniDsx3Ds3BandwidthLimit,
|
|
juniDsx3Ds3DsuScrambleMode,
|
|
juniDsx3MdlCarrier,
|
|
juniDsx3MdlTransmit,
|
|
juniDsx3MdlEic,
|
|
juniDsx3MdlLic,
|
|
juniDsx3MdlFic,
|
|
juniDsx3MdlUnit,
|
|
juniDsx3MdlPfi,
|
|
juniDsx3MdlPort,
|
|
juniDsx3MdlGenerator,
|
|
|
|
juniDs3NextIfIndex }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing management of DS3/E3 interfaces in a
|
|
Juniper product."
|
|
::= { juniDs3Groups 5 }
|
|
|
|
juniDs3FarEndGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniDsx3FarEndCurrentInvalidSeconds,
|
|
juniDsx3FarEndIntervalInvalidSeconds,
|
|
juniDsx3FarEndTotalInvalidSeconds }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete collection of objects providing remote statistics information
|
|
applicable to DS3 interfaces in a Juniper product. This group became
|
|
obsolete when remote port number, generator number and carrier objects
|
|
were added."
|
|
::= { juniDs3Groups 6 }
|
|
|
|
juniDs3FarEndGroup2 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniDsx3FarEndCurrentInvalidSeconds,
|
|
juniDsx3FarEndIntervalInvalidSeconds,
|
|
juniDsx3FarEndTotalInvalidSeconds,
|
|
juniDsx3FarEndPortNumber,
|
|
juniDsx3FarEndGeneratorNumber,
|
|
juniDsx3FarEndCarrier }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing remote statistics information
|
|
applicable to DS3 interfaces in a Juniper product."
|
|
::= { juniDs3Groups 7 }
|
|
|
|
END
|