david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
main
mibs/MIBS/lantronix/LANTRONIX-SLC-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

7433 lines
260 KiB
Plaintext
Raw Permalink Blame History

LANTRONIX-SLC-MIB DEFINITIONS ::= BEGIN
-- This MIB defines the management information for Lantronix Secure
-- Console Managers and Advanced Console Managers.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, Unsigned32, IpAddress, NOTIFICATION-TYPE, TimeTicks
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, MacAddress
FROM SNMPv2-TC
Ipv6Address
FROM IPV6-TC
products
FROM LANTRONIX-MIB;
slc MODULE-IDENTITY
LAST-UPDATED "201604170000Z"
ORGANIZATION "Lantronix, Inc."
CONTACT-INFO "Lantronix Technical Support
167 Technology Drive
Irvine, CA 92618 USA
+1 800 526-8766
snmp@lantronix.com"
DESCRIPTION "MIB module for managing Lantronix Secure Console Managers
and Advanced Console Managers"
-- revision history
REVISION "201604170000Z" -- April 17, 2016
DESCRIPTION "Added slc*IPv6 objects for new IPv6-related support,
added slcNetEthIfMacAddress, slcServSysRPMLogSize,
slcServSysOtherLogSize, slcServSSHDSAKeys,
slcDevPortCfgMinimizeLatency, slcDevPortCfgTelnetSoftIAC,
slcDevPortCfgSendTermString, slcDevPortCfgTerminationString,
slcDevPortCfgPowerManagementSeq, slcDevPortCfgPowerSupplies,
slcDevPortCfgToggleDTR, slcDevPortCfgTokenAction,
slcDevPortCfgTokenSendString, slcDevPortCfgTokenPowerSupply,
slcDevPortCfgTokenPowerAction, and slcDevRPM section."
REVISION "201502240000Z" -- February 24, 2015
DESCRIPTION "Added slcServSSHTimeoutDataDirection,
slcServTelnetTimeoutDataDirection, slcDevPortCfgUSBVBUS,
slcDevPortCfgAssertDTR, slcDevPortCfgPortType,
slcDevPortCfgTelnetTimeoutDataDirection,
slcDevPortCfgSSHTimeoutDataDirection,
slcDevPortCfgTCPTimeoutDataDirection,
slcDevPortCfgIdleTimeoutMessage,
slcDevPortCfgNumberOfSessionsMessage, and
slcSystemWebServer."
REVISION "201407100000Z" -- July 10, 2014
DESCRIPTION "Added slcNetSecurityFIPSMode, slcDevPortCfgDevPrompt,
slcDevPortCfgDevNumOutlets, slcDevPortCfgDevNumExpOutlets,
slcDevIntModem section, slcEventSDCardAction, and
slcEventNoDialToneAlarm."
REVISION "201312060000Z" -- December 06, 2013
DESCRIPTION "Added slcDevPortCfgReversePinout."
REVISION "201302200000Z" -- February 20, 2013
DESCRIPTION "Added slcNetVPN section, slcServSNMPv1v2, slcServSNMPNMS2,
slcServSiteDialbackRetries, slcAuthLDAPUserFilter,
slcAuthLDAPGroupFilter, slcAuthLDAPGroupMembershipAttr,
slcAuthLDAPGroupMembershipDN, slcAuthRADIUSUseVSA,
slcAuthGroups section, slcDevConGroup,
slcDevPortCfgDialbackRetries, slcDevPortCfgGroup,
slcDevPortCfgIPMask, slcPCCardCfgDialbackRetries,
slcPCCardCfgGroup, slcDevUSBCfgDialbackRetries,
slcDevUSBCfgDialtoneCheck, slcDevUSBCfgGroup,
slcSystemModelString, slcSystemWebGroup,
slcSystemWebInterface, slcSystemInternalTempLow,
slcSystemInternalTempHigh, slcSystemCalibrateTemp,
slcSystemWebBanner, slcDevPortErrorStatus, and
slcEventDevicePortError."
REVISION "201004070000Z" -- April 7, 2010
DESCRIPTION "Added slcDevPortCfgCHAPAuthLocalUsers, slcDevPortCfgUseSites,
slcPCCardCfgCHAPAuthLocalUsers, slcPCCardCfgUseSites,
slcDevUSBCfgCHAPAuthLocalUsers, slcDevUSBCfgUseSites, and
the slcServSite section."
REVISION "201001190000Z" -- January 19, 2010
DESCRIPTION "Added slcDevPortCfgUSBState, slcDevPortCfgUSBLogTo,
slcDevPortCfgUSBMaxFiles, slcDevPortCfgUSBMaxSize,
slcDevUSB section and slcEventUSBAction."
REVISION "200912090000Z" -- December 9, 2009
DESCRIPTION "Added slcNetEthIfMTU, slcNetEthIPv6, slcNetEthBonding,
slcServTelnetTelnetOut, slcServWebTermDeployment,
slcServWebTermBufSize, slcServSMTPSender,
slcAuthLocalAllowReuse, slcAuthLocalReuseHistory,
slcAuthLocalPasswordLifetime, slcAuthLocalWarningPeriod,
slcAuthLocalMaxLoginAttempts, slcAuthLocalLockoutPeriod,
slcAuthLocalMultipleSysadminLogins,
slcAuthLocalSysadminConsoleOnly, slcAuthNISDialback,
slcAuthNISDialbackNum, slcAuthLDAPBindWithLogin,
slcAuthLDAPUseLDAPSchema, slcAuthLDAPDialback,
slcAuthLDAPDialbackNum, slcAuthRADIUSDialback,
slcAuthRADIUSDialbackNum, slcAuthKerbDialback,
slcAuthKerbDialbackNum, slcAuthTACACSDialback,
slcAuthTACACSDialbackNum, slcAuthRemoteUserMenu,
slcAuthRemoteUserLocked, slcAuthRemoteUserDialback,
slcAuthRemoteUserDialbackNum, slcDevConNumberShowLines,
slcDevPortCfgNumberShowLines, slcDevPortCfgViewPortLog,
slcDevPortCfgPortLogSeq, slcDevPortCfgMaxDirectConnects,
slcDevPortCfgTelnetTimeout, slcDevPortCfgSSHTimeout,
slcDevPortCfgTCPTimeout, slcDevPortCfgCBCPClientType,
slcDevPortCfgCBCPServerAllowNoCallback,
slcDevPortCfgDialbackDelay, slcPCCardCfgCBCPClientType,
slcPCCardCfgCBCPServerAllowNoCallback,
slcPCCardCfgDialbackDelay, slcSystemSSHPreAuthBanner,
slcSystemSiteRackRow, slcSystemSiteRackCluster,
slcSystemSiteRack, slcSystemLCDScreens,
slcSystemLCDUserStrLine1, slcSystemLCDUserStrLine2,
slcSystemLCDScrolling, slcSystemLCDScrollDelay,
slcSystemLCDIdleDelay, slcSystemInternalTemp,
slcSystemWebProtocol, slcSystemWebCipher,
slcEventPCCardAction and slcEventSLCInternalTemp."
REVISION "200801090000Z" -- January 9, 2008
DESCRIPTION "Added slcServSNMPv3ReadWriteUser, slcServSNMPv3Security,
slcServSNMPv3Authentication, slcServSNMPv3Encryption,
slcServHostList objects, slcAuthNISEscapeSeq,
slcAuthNISBreakSeq, slcAuthLDAPEscapeSeq,
slcAuthLDAPBreakSeq, slcAuthRADIUSEscapeSeq,
slcAuthRADIUSBreakSeq, slcAuthKerbEscapeSeq,
slcAuthKerbBreakSeq, slcAuthTACACSEscapeSeq,
slcAuthTACACSBreakSeq, slcAuthRemoteUserEscapeSeq,
slcAuthRemoteUserBreakSeq, slcDevConShowLines,
slcDevPortCfgHostList, slcPCCardCfgHostList,
slcDevPortCfgDevLowTemp, slcDevPortCfgDevHighTemp,
slcDevPortCfgDevTemperature, slcDevPortCfgDevLowHumidity,
slcDevPortCfgDevHighHumidity, slcDevPortCfgDevHumidity,
slcDevPortCfgDevTraps, slcDevPortCfgShowLines,
slcSystemWebGadget, slcSystemAction,
slcEventDevicePortDevice* notifications."
REVISION "200706250000Z" -- June 25, 2007
DESCRIPTION "Added slcNetEthAlternateGateway, slcNetEthPingIPAddress,
slcNetEthPingInterface, slcNetEthPingDelay,
slcNetEthPingFailed, slcServSNMPTrapCommunity,
slcServSNMPAlarmDelay, slcServPhoneHome section,
slcDevPortCfgWebColumns, slcDevPortCfgWebRows and
slcDevPortCfgSyslogState."
REVISION "200702200000Z" -- February 20, 2007
DESCRIPTION "Added slcDevPortCfgSLMLoggingState, slcDevPortCfgSLMNMS,
slcDevPortCfgSLMByteThresh and slcDevPortCfgSLMTimeFrame."
REVISION "200702070000Z" -- February 7, 2007
DESCRIPTION "Added slcNetEthIfIPv6Addr and slcNetEthIfIPv6PrefixLength."
REVISION "200610200000Z" -- October 20, 2006
DESCRIPTION "Added slcNetFirewallRuleset* objects, slcNetFirewallMapping*
objects, slcAuthLDAPEncrypt, slcAuthTACACSServer2,
slcAuthTACACSServer3, slcDevPortCfgDODAuth,
slcDevPortCfgDODCHAPHost, slcPCCardCfgDODAuth, and
slcPCCardCfgDODCHAPHost. Obsoleted slcNetFirewallReject,
slcNetFirewallPing, slcNetFirewallSSH, slcNetFirewallTelnet,
slcNetFirewallHTTP, slcNetFirewallHTTPS and
slcNetFirewallSMBCIFS. Added dialinAndDialondemand(6) to
slcDevPortCfgModemState and slcPCCardCfgModemState."
REVISION "200607140000Z" -- July 14, 2006
DESCRIPTION "Added slcServSysRemoteServer2, slcServAuditInSystemLog,
slcAuthLocalState, slcAuthLocalOrder,
slcAuthLocalComplexPasswords, slcAuthLocalUseNextMethod,
slcAuthRemoteUserListenPorts, slcAuthRemoteUserDataPorts,
slcAuthRemoteUserClearPorts, slcAuthRemoteAuthListOnly,
slcDevPortCfgIdleTimeout, slcDevPortCfgRestartDelay,
slcDevPortCfgCallerIdLogging, slcDevPortCfgCallerIdATCmd,
slcPCCardCfgIdleTimeout, slcPCCardCfgRestartDelay,
slcPCCardCfgCallerIdLogging, slcPCCardCfgCallerIdATCmd.
Added dialondemand(5) to slcDevPortCfgModemState and
slcPCCardCfgModemState."
REVISION "200605120000Z" -- May 12, 2006
DESCRIPTION "Added slcNetEthDomain, slcServNTPLocalServer2,
slcServNTPLocalServer3, slcServSSHV1Incoming,
slcAuthNISSlave4, slcAuthNISSlave5,
slcPCCardCfgGSMPPPCompression, slcPCCardCfgGSMAutoAcquireDNS,
slcPCCardCfgGSMDialoutMode, slcPCCardCfgGSMContextID,
slcPCCardCfgGSMBearerService. Obsoleted
slcPCCardCfgGSMNetworkName."
REVISION "200602130000Z" -- February 13, 2006
DESCRIPTION "Added SLCAuthRemote group. Added slcServAuditIncludeCLI,
slcAuthLocalUserGroup, slcAuthLocalUserRights,
slcAuthNISGroup, slcAuthNISRights, slcAuthNISMenu,
slcAuthNISListenPorts, slcAuthNISDataPorts,
slcAuthNISClearPorts, slcAuthLDAPGroup, slcAuthLDAPRights,
slcAuthLDAPMenu, slcAuthLDAPListenPorts,
slcAuthLDAPDataPorts, slcAuthLDAPClearPorts,
slcAuthRADIUSGroup, slcAuthRADIUSRights, slcAuthRADIUSMenu,
slcAuthRADIUSListenPorts, slcAuthRADIUSDataPorts,
slcAuthRADIUSClearPorts, slcAuthKerbGroup, slcAuthKerbRights,
slcAuthKerbMenu, slcAuthKerbListenPorts,
slcAuthKerbDataPorts, slcAuthKerbClearPorts,
slcAuthTACACSGroup, slcAuthTACACSRights, slcAuthTACACSMenu,
slcAuthTACACSListenPorts, slcAuthTACACSDataPorts,
slcAuthTACACSClearPorts, slcDevGlobalMaxDirect,
slcSystemWebTimeout, slcPCCardCfgTelnetState,
slcPCCardCfgTelnetPort, slcPCCardCfgTelnetAuth,
slcPCCardCfgSSHState, slcPCCardCfgSSHPort,
slcPCCardCfgSSHAuth, slcPCCardCfgTCPState,
slcPCCardCfgTCPPort, slcPCCardCfgTCPAuth, slcPCCardCfgGSMPIN,
slcPCCardCfgGSMNetworkName. Added slcEventDevicePortSLMData
and slcEventDevicePortSLMConfig traps. Added Textual
Convention UserGroup and UserRights. Obsoleted
slcDevGlobalListenPorts, slcDevGlobalDataPorts and
slcDevGlobalClearPorts."
REVISION "200510030000Z" -- October 3, 2005
DESCRIPTION "Added slcServSSHPort."
REVISION "200506090000Z" -- June 9, 2005
DESCRIPTION "Added slcServSSHTimeout, slcServSSHWebSSH,
slcServSNMPReadOnlyCommunity, slcServSNMPReadWriteCommunity,
slcDevPortCfgAction, slcDevPortCfgEmailSend,
slcDevPortCfgBanner, slcPCCardCfgISDNChannel,
slcPCCardCfgISDNChannelNum, slcConnDurationStr, slcConnIdle,
slcConnIdleStr, slcConnSourceIP, slcSystemWelcomeBanner,
slcSystemLoginBanner, slcSystemLogoutBanner.
Added sftp(3) to slcSystemLoadVia."
REVISION "200412130000Z" -- December 13, 2004
DESCRIPTION "Initial version."
::= { products 1 }
-- Textual Conventions
EnabledState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The enabled/disabled state of an SLC feature."
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
AuthOrder ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Authentication order for a remote authentication method.
If the authentication method is disabled, AuthOrder = 0."
SYNTAX Integer32 (0..6)
SyslogLevel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Syslog logging levels"
SYNTAX INTEGER {
off(1),
info(2),
warning(3),
error(4),
debug(5)
}
UserGroup ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The group assigned to a user. Each group has a set of user
rights associated with it."
SYNTAX INTEGER {
default(1),
power(2),
administrators(3),
custom(4)
}
UserRights ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The rights assigned to a user. Each group has a set of user
rights associated with it. The string is a comma-separated
list of rights:
ad - full administrative rights
do - Device Ports operations
dp - configure Device Ports
dr - Diagnostics and Reports
dt - configure Date and Time
fc - manage Firmware and Configurations
lu - configure Local Users
md - configure Internal Modem
nt - configure Networking
pc - configure PC Card
ra - configure Remote Authentication
rp - manage Remote Power Managers
rs - Reboot or Shutdown the SLC
sd - manage SD Card
sk - configure SSH Keys
sn - configure Secure Ltx Network
sv - configure Services
ub - configure USB Devices
um - configure User Menus
wb - Web Access"
SYNTAX OCTET STRING (SIZE (0..255))
TimeoutDataDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The direction of data used to determine if a connection has
timed out."
SYNTAX INTEGER {
incomingNetwork(1),
outgoingNetwork(2),
bothDirections(3)
}
RPMTowerIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The unique identifier for an RPM tower or unit."
SYNTAX Integer32 (1..2)
RPMOutletIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The unique identifier for an RPM outlet."
SYNTAX Integer32 (1..60)
-- Groups in slc
slcNetwork OBJECT IDENTIFIER ::= { slc 1 }
slcServices OBJECT IDENTIFIER ::= { slc 2 }
slcAuth OBJECT IDENTIFIER ::= { slc 3 }
slcDevices OBJECT IDENTIFIER ::= { slc 4 }
slcConnections OBJECT IDENTIFIER ::= { slc 5 }
slcSystem OBJECT IDENTIFIER ::= { slc 6 }
--
-- Network Group
--
slcNetEth OBJECT IDENTIFIER ::= { slcNetwork 1 }
slcNetEthIfNumber OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the Ethernet interface table."
::= { slcNetEth 1 }
-- Ethernet interface table
slcNetEthIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcNetEthIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of Ethernet network entries. The number of entries is
given by the value of slcNetEthIfNumber."
::= { slcNetEth 2 }
slcNetEthIfEntry OBJECT-TYPE
SYNTAX SlcNetEthIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry with the attributes for each Ethernet interface. Ethernet
Port Eth1 is always index 1, and Eth2 is always index 2."
INDEX { slcNetEthIfIndex }
::= { slcNetEthIfTable 1 }
SlcNetEthIfEntry ::= SEQUENCE {
slcNetEthIfIndex Integer32,
slcNetEthIfSource INTEGER,
slcNetEthIfMode INTEGER,
slcNetEthIfIPv6Addr Ipv6Address,
slcNetEthIfIPv6PrefixLength INTEGER,
slcNetEthIfMTU Integer32,
slcNetEthIfMacAddress MacAddress
}
slcNetEthIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference index for each Ethernet interface."
::= { slcNetEthIfEntry 1 }
slcNetEthIfSource OBJECT-TYPE
SYNTAX INTEGER { disabled(1), dhcp(2), bootp(3), static(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The state/source for the IP Address and subnet mask for the
Ethernet interface."
::= { slcNetEthIfEntry 2 }
slcNetEthIfMode OBJECT-TYPE
SYNTAX INTEGER { autoNegotiate(1),
halfDuplex10mbit(2),
fullDuplex10mbit(3),
halfDuplex100mbit(4),
fullDuplex100mbit(5),
halfDuplex1000mbit(6),
fullDuplex1000mbit(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The speed and duplex for the Ethernet interface."
::= { slcNetEthIfEntry 3 }
slcNetEthIfIPv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv6 Address for each Ethernet interface."
::= { slcNetEthIfEntry 4 }
slcNetEthIfIPv6PrefixLength OBJECT-TYPE
SYNTAX INTEGER (0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The length of the prefix for slcNetEthIfIPv6Addr (in bits)."
::= { slcNetEthIfEntry 5 }
slcNetEthIfMTU OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Maximum Transmission Unit for the Ethernet interface."
::= { slcNetEthIfEntry 6 }
slcNetEthIfMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MAC Address for the Ethernet interface."
::= { slcNetEthIfEntry 7 }
slcNetEthGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The gateway for routing non-Eth1 and non-Eth2 network IPv4
traffic."
::= { slcNetEth 3 }
slcNetEthGatewayPrecedence OBJECT-TYPE
SYNTAX INTEGER { dhcp(1), default(2), gprs(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The gateway to give precedence to, if both a static gateway
is set, and a gateway is acquired via DHCP or a GPRS Modem."
::= { slcNetEth 4 }
slcNetEthKeepaliveStartProbes OBJECT-TYPE
SYNTAX Integer32 (1..99999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCP keepalive timer: number of seconds to wait before sending
out the initial probe."
::= { slcNetEth 5 }
slcNetEthKeepaliveNumberOfProbes OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCP keepalive timer: number of probes to send out after the
initial probe."
::= { slcNetEth 6 }
slcNetEthKeepaliveInterval OBJECT-TYPE
SYNTAX Integer32 (1..9999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCP keepalive timer: number of seconds between probes."
::= { slcNetEth 7 }
slcNetEthIPForwarding OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, IP forwarding is used."
::= { slcNetEth 8 }
slcNetEthDNS1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv4 Address of DNS server #1."
::= { slcNetEth 9 }
slcNetEthDNS2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv4 Address of DNS server #2."
::= { slcNetEth 10 }
slcNetEthDNS3 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv4 Address of DNS server #3."
::= { slcNetEth 11 }
slcNetEthDomain OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SLC domain name."
::= { slcNetEth 12 }
slcNetEthAlternateGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The alternate gateway for routing non-Eth1 and non-Eth2
network traffic. The alternate gateway is used if an
IP Address usually accessible through the default gateway
fails to return one or more pings."
::= { slcNetEth 13 }
slcNetEthPingIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP Address to ping to determine if the alternate gateway
should be used."
::= { slcNetEth 14 }
slcNetEthPingInterface OBJECT-TYPE
SYNTAX INTEGER { ethernet1(1), ethernet2(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Ethernet interface used to determine if the alternate
gateway should be used."
::= { slcNetEth 15 }
slcNetEthPingDelay OBJECT-TYPE
SYNTAX Integer32 (1..250)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The delay, in seconds, between pings used to determine if the
alternate gateway should be used."
::= { slcNetEth 16 }
slcNetEthPingFailed OBJECT-TYPE
SYNTAX Integer32 (1..250)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of pings with no response required for the
alternate gateway to be used."
::= { slcNetEth 17 }
slcNetEthBonding OBJECT-TYPE
SYNTAX INTEGER { disabled(1),
activeBackup(2),
aggregation(3),
adaptiveLoadBalancing(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Ethernet network redundancy/load balancing setting."
::= { slcNetEth 18 }
slcNetEthIPv6 OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, IPv6 is enabled."
::= { slcNetEth 19 }
slcNetEthGatewayIPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The default gateway for routing non-Eth1 and non-Eth2 IPv6
network traffic."
::= { slcNetEth 20 }
slcNetEthDNS1IPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv6 Address of DNS server #1."
::= { slcNetEth 21 }
slcNetEthDNS2IPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv6 Address of DNS server #2."
::= { slcNetEth 22 }
slcNetEthDNS3IPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv6 Address of DNS server #3."
::= { slcNetEth 23 }
slcNetEthPreferIPv4DNS OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, IPv4 DNS records will be preferred when DNS
hostname lookups are performed. Otherwise IPv6 records will
be preferred (when IPv6 is enabled)."
::= { slcNetEth 24 }
slcNetFirewall OBJECT IDENTIFIER ::= { slcNetwork 2 }
slcNetFirewallState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, network traffic is filtered."
::= { slcNetFirewall 1 }
slcNetFirewallReject OBJECT-TYPE
SYNTAX INTEGER { return(1), ignore(2) }
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "If enabled, returns a 'connection denied' message on blocked
ports. If disabled, ignores attempts to connect to a blocked
port. This object is deprecated."
::= { slcNetFirewall 2 }
slcNetFirewallPing OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "If enabled, the SLC is invisible to pings. This object is
deprecated."
::= { slcNetFirewall 3 }
slcNetFirewallSSH OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "If enabled, the SSH port is open. If disabled, the SSH
port is blocked to network traffic. This object is
deprecated."
::= { slcNetFirewall 4 }
slcNetFirewallTelnet OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "If enabled, the Telnet port is open. If disabled, the Telnet
port is blocked to network traffic. This object is
deprecated."
::= { slcNetFirewall 5 }
slcNetFirewallHTTP OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "If enabled, the HTTP port is open. If disabled, the HTTP
port is blocked to network traffic. This object is
deprecated."
::= { slcNetFirewall 6 }
slcNetFirewallHTTPS OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "If enabled, the HTTPS port is open. If disabled, the HTTPS
port is blocked to network traffic. This object is
deprecated."
::= { slcNetFirewall 7 }
slcNetFirewallSMBCIFS OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "If enabled, the SMBCIFS port is open. If disabled, the
SMBCIFS port is blocked to network traffic. This object is
deprecated."
::= { slcNetFirewall 8 }
slcNetFirewallRulesetNumber OBJECT-TYPE
SYNTAX Integer32 (0..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of entries in the IP Filter Ruleset table."
::= { slcNetFirewall 9 }
-- IP Filter Ruleset table
slcNetFirewallRulesetTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcNetFirewallRulesetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of IP Filter Rulesets. The number of entries is
given by the value of slcNetFirewallRulesetNumber."
::= { slcNetFirewall 10 }
slcNetFirewallRulesetEntry OBJECT-TYPE
SYNTAX SlcNetFirewallRulesetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry with all the attributes, including the rules, for
an IP Filter Ruleset."
INDEX { slcNetFirewallRulesetIndex }
::= { slcNetFirewallRulesetTable 1 }
SlcNetFirewallRulesetEntry ::= SEQUENCE {
slcNetFirewallRulesetIndex Integer32,
slcNetFirewallRulesetName OCTET STRING,
slcNetFirewallRulesetNumRules Integer32,
slcNetFirewallRulesetRules OCTET STRING
}
slcNetFirewallRulesetIndex OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference index for each IP Filter Ruleset."
::= { slcNetFirewallRulesetEntry 1 }
slcNetFirewallRulesetName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name assigned to the IP Filter Ruleset."
::= { slcNetFirewallRulesetEntry 2 }
slcNetFirewallRulesetNumRules OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of rules in the slcNetFirewallRulesetRules string."
::= { slcNetFirewallRulesetEntry 3 }
slcNetFirewallRulesetRules OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP Filter rules that are defined for the Ruleset. The
rule format is <IP>/<Mask Bits>;<Protocol>;<Ports>;<Action>
and rules are separated by a colon. If the string is
truncated because of system limitations, the string will be
terminated with two colons."
::= { slcNetFirewallRulesetEntry 4 }
slcNetFirewallMappingNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of entries in the IP Filter Mapping table."
::= { slcNetFirewall 11 }
-- IP Filter Mapping table
slcNetFirewallMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcNetFirewallMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of mappings between IP Filter Rulesets and interfaces.
The number of entries is given by the value of
slcNetFirewallMappingNumber."
::= { slcNetFirewall 12 }
slcNetFirewallMappingEntry OBJECT-TYPE
SYNTAX SlcNetFirewallMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry defining an interface that has an IP Filter Ruleset
assigned to it. The interface can be either an Ethernet
interface or a PC Card or Device Port modem."
INDEX { slcNetFirewallMappingIndex }
::= { slcNetFirewallMappingTable 1 }
SlcNetFirewallMappingEntry ::= SEQUENCE {
slcNetFirewallMappingIndex Integer32,
slcNetFirewallMappingIfac INTEGER,
slcNetFirewallMappingIfacId Integer32,
slcNetFirewallMappingRuleset OCTET STRING
}
slcNetFirewallMappingIndex OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference index for each IP Filter mapping."
::= { slcNetFirewallMappingEntry 1 }
slcNetFirewallMappingIfac OBJECT-TYPE
SYNTAX INTEGER { ethernet1(1),
ethernet2(2),
upperPCCard(3),
lowerPCCard(4),
devicePort(5),
usbPort(6),
internalModem(7) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The interface which has an IP Filter Ruleset assigned to it.
If the interface is devicePort or usbPort,
slcNetFirewallMappingIfacId defines which Device Port or USB
Port (with an attached modem) the Ruleset is assigned to."
::= { slcNetFirewallMappingEntry 2 }
slcNetFirewallMappingIfacId OBJECT-TYPE
SYNTAX Integer32 (0..48)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The identifier for a Device Port if slcNetFirewallMappingIfac
equals devicePort(5), or the identifier for a USB Port if
slcNetFirewallMappingIfac equals usbPort. Otherwise equals
zero."
::= { slcNetFirewallMappingEntry 3 }
slcNetFirewallMappingRuleset OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the IP Filter Ruleset assigned to the interface."
::= { slcNetFirewallMappingEntry 4 }
slcNetRouting OBJECT IDENTIFIER ::= { slcNetwork 3 }
slcNetRouteRIPState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the Routing Information Protocol (RIP) is used."
::= { slcNetRouting 1 }
slcNetRouteRIPVersion OBJECT-TYPE
SYNTAX INTEGER { one(1), two(2), oneAndTwo(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version of RIP being used."
::= { slcNetRouting 2 }
slcNetRouteStaticState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, static routing is used."
::= { slcNetRouting 3 }
slcNetRouteStaticNumber OBJECT-TYPE
SYNTAX Integer32 (0..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the Static Routes table."
::= { slcNetRouting 4 }
-- Static Routes table
slcNetRouteStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcNetRouteStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of static route entries. The number of entries is
given by the value of slcNetRouteStaticNumber."
::= { slcNetRouting 5 }
slcNetRouteStaticEntry OBJECT-TYPE
SYNTAX SlcNetRouteStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry with the IP Address, subnet mask, and gateway
for a static route."
INDEX { slcNetRouteStaticIndex }
::= { slcNetRouteStaticTable 1 }
SlcNetRouteStaticEntry ::= SEQUENCE {
slcNetRouteStaticIndex Integer32,
slcNetRouteStaticIP IpAddress,
slcNetRouteStaticMask IpAddress,
slcNetRouteStaticGateway IpAddress
}
slcNetRouteStaticIndex OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference index for each static route."
::= { slcNetRouteStaticEntry 1 }
slcNetRouteStaticIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP Address for the static route."
::= { slcNetRouteStaticEntry 2 }
slcNetRouteStaticMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The subnet mask for the static route."
::= { slcNetRouteStaticEntry 3 }
slcNetRouteStaticGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The gateway for the static route."
::= { slcNetRouteStaticEntry 4 }
slcNetVPN OBJECT IDENTIFIER ::= { slcNetwork 4 }
slcNetVPNTunnel OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the SLC is configured to initiate a VPN tunnel."
::= { slcNetVPN 1 }
slcNetVPNStatus OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A string giving the current status of the VPN tunnel."
::= { slcNetVPN 2 }
slcNetVPNName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the VPN tunnel."
::= { slcNetVPN 3 }
slcNetVPNEthPort OBJECT-TYPE
SYNTAX INTEGER { ethernet1(1), ethernet2(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Ethernet interface used for the VPN tunnel."
::= { slcNetVPN 4 }
slcNetVPNRemoteHost OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP Address of the host on the remote side of the tunnel."
::= { slcNetVPN 5 }
slcNetVPNRemoteId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "How the remote host should be identified for authentication."
::= { slcNetVPN 6 }
slcNetVPNRemoteHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If the remote host is behind a gateway, this specifies the
IP Address of the gateway's public network interface."
::= { slcNetVPN 7 }
slcNetVPNRemoteSubnet OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "One or more subnets behind the remote host, expressed in
CIDR notation (IP Address/mask bits). Multiple subnets are
separated by a comma."
::= { slcNetVPN 8 }
slcNetVPNLocalId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "How the SLC should be identified for authentication."
::= { slcNetVPN 9 }
slcNetVPNLocalHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If the SLC is behind a gateway, this specifies the
IP Address of the gateway's public network interface."
::= { slcNetVPN 10 }
slcNetVPNLocalSubnet OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "One or more subnets behind the SLC, expressed in
CIDR notation (IP Address/mask bits). Multiple subnets are
separated by a comma."
::= { slcNetVPN 11 }
slcNetVPNIKENegotiation OBJECT-TYPE
SYNTAX INTEGER { main(1), aggressive(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of mode used by the SLC and the remote host for the
IKE protocol, which exchanges security options between two
hosts which want to communicate via IPSec."
::= { slcNetVPN 12 }
slcNetVPNIKEEncryption OBJECT-TYPE
SYNTAX INTEGER { any(1), tripledes(2), aes(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of encryption used for IKE negotiation."
::= { slcNetVPN 13 }
slcNetVPNIKEAuthentication OBJECT-TYPE
SYNTAX INTEGER { any(1), sha1(2), md5(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of authentication used for IKE negotiation."
::= { slcNetVPN 14 }
slcNetVPNIKEDHGroup OBJECT-TYPE
SYNTAX INTEGER { any(1), dhg2(2), dhg5(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of Diffie-Hellman Group used for IKE negotiation."
::= { slcNetVPN 15 }
slcNetVPNESPEncryption OBJECT-TYPE
SYNTAX INTEGER { any(1), tripledes(2), aes(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of encryption used for encrypting data sent through
the tunnel."
::= { slcNetVPN 16 }
slcNetVPNESPAuthentication OBJECT-TYPE
SYNTAX INTEGER { any(1), sha1(2), md5(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of authentication used for authenticating data sent
through the VPN tunnel."
::= { slcNetVPN 17 }
slcNetVPNESPDHGroup OBJECT-TYPE
SYNTAX INTEGER { any(1), dhg2(2), dhg5(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of Diffie-Hellman Group used for the key exchange
for data sent through the tunnel."
::= { slcNetVPN 18 }
slcNetVPNAuthentication OBJECT-TYPE
SYNTAX INTEGER { rsaPublicKey(1), preSharedKey(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of authentication used by the host on each side of
the tunnel to verify the identify of the other host."
::= { slcNetVPN 19 }
slcNetVPNPerfectForwardSecrecy OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When a new IPSec SA is negotiated after the IPSec SA lifetime
expires, a new Diffie-Hellman key exchange can be performed
to generate a new session key to be used to encrypt the data
being sent through the tunnel. If this is enabled, it provides
greater security, since the old session keys are destroyed."
::= { slcNetVPN 20 }
slcNetVPNModeConfigClient OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If this is enabled, the SLC can receive network configuration
from the remote host. This allows the remote host to assign
an IP address/netmask to the SLC side of the VPN tunnel."
::= { slcNetVPN 21 }
slcNetVPNXAUTHClient OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If this is enabled, the SLC will send authentication
credentials to the remote host if they are requested.
XAUTH, or Extended Authentication, can be used as an
additional security measure on top of the Pre-Shared Key
or RSA Public Key."
::= { slcNetVPN 22 }
slcNetVPNXAUTHClientLogin OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If slcNetVPNXAUTHClientLogin is enabled, this is the login
used for authentication."
::= { slcNetVPN 23 }
slcNetSecurity OBJECT IDENTIFIER ::= { slcNetwork 5 }
slcNetSecurityFIPSMode OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the SLC is running in FIPS mode."
::= { slcNetSecurity 1 }
--
-- Services Group
--
slcServNTP OBJECT IDENTIFIER ::= { slcServices 1 }
slcServNTPState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, NTP is used to synchronize SLC time with a
network time server."
::= { slcServNTP 1 }
slcServNTPSynchronize OBJECT-TYPE
SYNTAX INTEGER { broadcast(1), poll(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The method used by the SLC to synchronize time: receive
broadcasts from the NTP server, or poll the NTP server."
::= { slcServNTP 2 }
slcServNTPPoll OBJECT-TYPE
SYNTAX INTEGER { local(1), public(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If slcServNTPSynchronize is set to poll, indicates whether
a local server or a public server is used as the NTP server."
::= { slcServNTP 3 }
slcServNTPServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv4 Address of the local or public NTP server."
::= { slcServNTP 4 }
slcServNTPLocalServer2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv4 Address of the 2nd local NTP server."
::= { slcServNTP 5 }
slcServNTPLocalServer3 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv4 Address of the 3rd local NTP server."
::= { slcServNTP 6 }
slcServNTPServerIPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv6 Address of the local NTP server."
::= { slcServNTP 7 }
slcServNTPLocalServer2IPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv6 Address of the 2nd local NTP server."
::= { slcServNTP 8 }
slcServNTPLocalServer3IPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv6 Address of the 3rd local NTP server."
::= { slcServNTP 9 }
slcServSyslog OBJECT IDENTIFIER ::= { slcServices 2 }
slcServSysNetworkLevel OBJECT-TYPE
SYNTAX SyslogLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The logging level for Network messages."
::= { slcServSyslog 1 }
slcServSysServicesLevel OBJECT-TYPE
SYNTAX SyslogLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The logging level for Services messages."
::= { slcServSyslog 2 }
slcServSysAuthLevel OBJECT-TYPE
SYNTAX SyslogLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The logging level for Authentication messages."
::= { slcServSyslog 3 }
slcServSysDevPortLevel OBJECT-TYPE
SYNTAX SyslogLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The logging level for Device Port messages."
::= { slcServSyslog 4 }
slcServSysDiagLevel OBJECT-TYPE
SYNTAX SyslogLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The logging level for Diagnostic messages."
::= { slcServSyslog 5 }
slcServSysGeneralLevel OBJECT-TYPE
SYNTAX SyslogLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The logging level for General system messages."
::= { slcServSyslog 6 }
slcServSysRemoteServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv4 Address of the remote Syslog Server."
::= { slcServSyslog 7 }
slcServSysRemoteServer2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv4 Address of the secondary remote Syslog Server."
::= { slcServSyslog 8 }
slcServSysRemoteServerIPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv6 Address of the remote Syslog Server."
::= { slcServSyslog 9 }
slcServSysRemoteServer2IPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv6 Address of the secondary remote Syslog Server."
::= { slcServSyslog 10 }
slcServSysRPMLogSize OBJECT-TYPE
SYNTAX Integer32 (5..40)
UNITS "Kilobytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum size in Kilobytes that RPM logs can grow to
before they are pruned. When the file is pruned, it will
be pruned to 50% of the RPM Log Size."
::= { slcServSyslog 11 }
slcServSysOtherLogSize OBJECT-TYPE
SYNTAX Integer32 (5..40)
UNITS "Kilobytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum size in Kilobytes that all logs other than RPM
logs can grow to before they are pruned. When the file is
pruned, it will be pruned to 50% of the RPM Log Size."
::= { slcServSyslog 12 }
slcServAuditLog OBJECT IDENTIFIER ::= { slcServices 3 }
slcServAuditState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, logs all configuration changes to an audit log."
::= { slcServAuditLog 1 }
slcServAuditSize OBJECT-TYPE
SYNTAX Integer32 (5..500)
UNITS "Kilobytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum size of the audit login in Kilobytes."
::= { slcServAuditLog 2 }
slcServAuditIncludeCLI OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, all CLI commands are included in the audit log in
addition to a description of the configuration change."
::= { slcServAuditLog 3 }
slcServAuditInSystemLog OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, all audit log entries are also sent to the system
log."
::= { slcServAuditLog 4 }
slcServSSH OBJECT IDENTIFIER ::= { slcServices 4 }
slcServSSHState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, allows logins to the SLC CLI via SSH."
::= { slcServSSH 1 }
slcServSSHTimeout OBJECT-TYPE
SYNTAX Integer32 (0..30)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout (in minutes) for SSH connections. A value
of 0 indicates that timeouts are disabled."
::= { slcServSSH 2 }
slcServSSHWebSSH OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, allows Web SSH access to the CLI and the
Device Ports."
::= { slcServSSH 3 }
slcServSSHPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The TCP Port number for incoming SSH sessions to the SLC CLI."
::= { slcServSSH 4 }
slcServSSHV1Incoming OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, incoming SSH version 1 connections are allowed."
::= { slcServSSH 5 }
slcServSSHTimeoutDataDirection OBJECT-TYPE
SYNTAX TimeoutDataDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If slcServSSHTimeout is enabled, this setting indicates the
direction of data used to determine if the connection has
timed out."
::= { slcServSSH 6 }
slcServSSHDSAKeys OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, SSH will support DSA keys for incoming and
outgoing connections."
::= { slcServSSH 7 }
slcServTelnet OBJECT IDENTIFIER ::= { slcServices 5 }
slcServTelnetState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, allows logins to the SLC CLI via Telnet."
::= { slcServTelnet 1 }
slcServTelnetTimeout OBJECT-TYPE
SYNTAX Integer32 (0..30)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout (in minutes) for Telnet connections. A value
of 0 indicates that timeouts are disabled."
::= { slcServTelnet 2 }
slcServTelnetWebTelnet OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, allows Web Telnet access to the CLI and the
Device Ports."
::= { slcServTelnet 3 }
slcServTelnetTelnetOut OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, allows outgoing Telnet connections."
::= { slcServTelnet 4 }
slcServTelnetTimeoutDataDirection OBJECT-TYPE
SYNTAX TimeoutDataDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If slcServTelnetTimeout is enabled, this setting indicates
the direction of data used to determine if the connection
has timed out."
::= { slcServTelnet 5 }
slcServSNMP OBJECT IDENTIFIER ::= { slcServices 6 }
slcServSNMPState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Enables the SNMP agent on the SLC."
::= { slcServSNMP 1 }
slcServSNMPTraps OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the SLC sends traps for key events."
::= { slcServSNMP 2 }
slcServSNMPNMS OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv4 Address of the Network Management System (NMS)."
::= { slcServSNMP 3 }
slcServSNMPLocation OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SNMP location for the SLC."
::= { slcServSNMP 4 }
slcServSNMPContact OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SNMP contact for the SLC."
::= { slcServSNMP 5 }
slcServSNMPv3User OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The user name for read-only access to the SLC via SNMP v3."
::= { slcServSNMP 6 }
slcServSNMPReadOnlyCommunity OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SNMP read-only community for SNMP versions 1 and 2."
::= { slcServSNMP 7 }
slcServSNMPReadWriteCommunity OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SNMP read-write community for SNMP versions 1 and 2."
::= { slcServSNMP 8 }
slcServSNMPTrapCommunity OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SNMP trap community for SNMP versions 1 and 2."
::= { slcServSNMP 9 }
slcServSNMPAlarmDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The delay, in seconds, between traps that are sent out for
alarm conditions."
::= { slcServSNMP 10 }
slcServSNMPv3ReadWriteUser OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The user name for read-write access to the SLC via SNMP v3."
::= { slcServSNMP 11 }
slcServSNMPv3Security OBJECT-TYPE
SYNTAX INTEGER { noAuthNoEncrypt(1), authNoEncrypt(2), authEncrypt(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The security model used for SNMP v3: insecure authentication
and no packet encryption, secure authentication and no packet
encryption, secure authentication and packet encryption."
::= { slcServSNMP 12 }
slcServSNMPv3Authentication OBJECT-TYPE
SYNTAX INTEGER { md5(1), sha(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When slcServSNMPv3Security is set to authNoEncrypt or
authEncrypt, the type of authentication used."
::= { slcServSNMP 13 }
slcServSNMPv3Encryption OBJECT-TYPE
SYNTAX INTEGER { des(1), aes(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When slcServSNMPv3Security is set to authEncrypt, the type
of encryption used."
::= { slcServSNMP 14 }
slcServSNMPv1v2 OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, SNMP version 1 and version 2 (which use the
Read-Only and Read-Write Communities) is enabled."
::= { slcServSNMP 15 }
slcServSNMPNMS2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv4 Address of the 2nd Network Management System (NMS)."
::= { slcServSNMP 16 }
slcServSNMPNMSIPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv6 Address of the Network Management System (NMS)."
::= { slcServSNMP 17 }
slcServSNMPNMS2IPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv6 Address of the 2nd Network Management System (NMS)."
::= { slcServSNMP 18 }
slcServSMTP OBJECT IDENTIFIER ::= { slcServices 7 }
slcServSMTPServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP Address of the SMTP (email) server."
::= { slcServSMTP 1 }
slcServSMTPSender OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sender's email address for emails sent from the SLC."
::= { slcServSMTP 2 }
slcServNFS OBJECT IDENTIFIER ::= { slcServices 8 }
-- NFS Mounts table
slcServNFSMountTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcServNFSMountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of NFS Mounts."
::= { slcServNFS 1 }
slcServNFSMountEntry OBJECT-TYPE
SYNTAX SlcServNFSMountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing a NFS Mount and it's attributes."
INDEX { slcServNFSMountIndex }
::= { slcServNFSMountTable 1 }
SlcServNFSMountEntry ::= SEQUENCE {
slcServNFSMountIndex Integer32,
slcServNFSMountRemoteDir OCTET STRING,
slcServNFSMountLocalDir OCTET STRING,
slcServNFSMountReadWrite EnabledState,
slcServNFSMountMount EnabledState
}
slcServNFSMountIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference index for each NFS Mount."
::= { slcServNFSMountEntry 1 }
slcServNFSMountRemoteDir OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The remote directory of the NFS Mount, in the format
<remote server>:/<remote directory>."
::= { slcServNFSMountEntry 2 }
slcServNFSMountLocalDir OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The directory in the SLC on which the remote directory is
mounted."
::= { slcServNFSMountEntry 3 }
slcServNFSMountReadWrite OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the remote NFS directory is mounted read-write.
If disabled, the remote NFS directory is mounted read-only."
::= { slcServNFSMountEntry 4 }
slcServNFSMountMount OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the remote NFS directory is configured to be
mounted. If disabled, the remote NFS directory will not be
mounted, or will be unmounted if is is mounted."
::= { slcServNFSMountEntry 5 }
slcServCIFS OBJECT IDENTIFIER ::= { slcServices 9 }
slcServCIFSState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the SLC exports a CIFS share containing system
logs, Device Port logs, and saved SLC configurations."
::= { slcServCIFS 1 }
slcServCIFSEth1 OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the CIFS share is exported on the Eth1 interface."
::= { slcServCIFS 2 }
slcServCIFSEth2 OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the CIFS share is exported on the Eth2 interface."
::= { slcServCIFS 3 }
slcServCIFSWorkgroup OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SMB/CIFS workgroup that the CIFS share is associated with."
::= { slcServCIFS 4 }
slcServSLCNetwork OBJECT IDENTIFIER ::= { slcServices 10 }
slcServSLCNetSearch OBJECT-TYPE
SYNTAX INTEGER { both(1), subnet(2), manual(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates how to search for SLCs on the network: by searching
a list of manually entered IP Addresses, by broadcasting on
the local subnet, or both."
::= { slcServSLCNetwork 1 }
slcServSLCNetNumber OBJECT-TYPE
SYNTAX Integer32 (0..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the SLC Network Manual IP Address table."
::= { slcServSLCNetwork 2 }
-- SLC Network Manual IP Address table
slcServSLCNetTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcServSLCNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of manually entered IP Address entries. The number of
entries is given by the value of slcServSLCNetNumber."
::= { slcServSLCNetwork 3 }
slcServSLCNetEntry OBJECT-TYPE
SYNTAX SlcServSLCNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing an IP Address for searching the SLC Network."
INDEX { slcServSLCNetIndex }
::= { slcServSLCNetTable 1 }
SlcServSLCNetEntry ::= SEQUENCE {
slcServSLCNetIndex Integer32,
slcServSLCNetIP IpAddress
}
slcServSLCNetIndex OBJECT-TYPE
SYNTAX Integer32 (1..200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference index for each manual IP Address."
::= { slcServSLCNetEntry 1 }
slcServSLCNetIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP Address to search for in the SLC Network."
::= { slcServSLCNetEntry 2 }
slcServPhoneHome OBJECT IDENTIFIER ::= { slcServices 11 }
slcServPhoneHomeState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Enables the Phone Home feature."
::= { slcServPhoneHome 1 }
slcServPhoneHomeIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP Address used for Phone Home communication."
::= { slcServPhoneHome 2 }
slcServHostList OBJECT IDENTIFIER ::= { slcServices 12 }
slcServHostListNumber OBJECT-TYPE
SYNTAX Integer32 (0..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of entries in the Host List table."
::= { slcServHostList 1 }
-- Host List table
slcServHostListTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcServHostListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of Host Lists. The number of entries is given by the
value of slcServHostListNumber."
::= { slcServHostList 2 }
slcServHostListEntry OBJECT-TYPE
SYNTAX SlcServHostListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing a Host List, used for Dial-in connections
on a Device Port or PC Card modem."
INDEX { slcServHostListIndex }
::= { slcServHostListTable 1 }
SlcServHostListEntry ::= SEQUENCE {
slcServHostListIndex Integer32,
slcServHostListName OCTET STRING,
slcServHostListRetryCount Integer32,
slcServHostListAuth EnabledState,
slcServHostListNumHosts Integer32,
slcServHostListHosts OCTET STRING
}
slcServHostListIndex OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference index for each Host List."
::= { slcServHostListEntry 1 }
slcServHostListName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The unique name assigned to the Host List."
::= { slcServHostListEntry 2 }
slcServHostListRetryCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times to retry connections to an individual host
within the Host List."
::= { slcServHostListEntry 3 }
slcServHostListAuth OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, authentication is enabled for the hosts in the
Host List."
::= { slcServHostListEntry 4 }
slcServHostListNumHosts OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of individual hosts in the Host List."
::= { slcServHostListEntry 5 }
slcServHostListHosts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A string containing all hosts in the Host List; the entry for
each host is separated by a ';'. Each host entry is formatted
as follows: '<Host>,<Protocol>,<TCP Port>,<Escape Sequence>;'."
::= { slcServHostListEntry 6 }
slcServWebTerm OBJECT IDENTIFIER ::= { slcServices 13 }
slcServWebTermDeployment OBJECT-TYPE
SYNTAX INTEGER { javaWebStart(1), applet(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The method used to launch the Java Terminal for Web SSH and
Web Telnet. This object is deprecated."
::= { slcServWebTerm 1 }
slcServWebTermBufSize OBJECT-TYPE
SYNTAX Integer32 (24..5000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of lines in the Java Terminal buffer."
::= { slcServWebTerm 2 }
slcServSite OBJECT IDENTIFIER ::= { slcServices 14 }
slcServSiteNumber OBJECT-TYPE
SYNTAX Integer32 (0..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of entries in the Sites table."
::= { slcServSite 1 }
-- Sites table
slcServSiteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcServSiteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of Sites. The number of entries is given by the
value of slcServSiteNumber."
::= { slcServSite 2 }
slcServSiteEntry OBJECT-TYPE
SYNTAX SlcServSiteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing a Site, used for connections on a
Device Port or PC Card/USB modem."
INDEX { slcServSiteIndex }
::= { slcServSiteTable 1 }
SlcServSiteEntry ::= SEQUENCE {
slcServSiteIndex Integer32,
slcServSiteName OCTET STRING,
slcServSitePort INTEGER,
slcServSitePortId Integer32,
slcServSiteLoginHost OCTET STRING,
slcServSiteCHAPSecret OCTET STRING,
slcServSiteTimeout Integer32,
slcServSiteLocalIP IpAddress,
slcServSiteRemoteIP IpAddress,
slcServSiteStaticRouteIP IpAddress,
slcServSiteStaticRouteMask IpAddress,
slcServSiteStaticRouteGateway IpAddress,
slcServSiteDialoutNum OCTET STRING,
slcServSiteDialoutLogin OCTET STRING,
slcServSiteDialback EnabledState,
slcServSiteDialbackNum OCTET STRING,
slcServSiteDialbackDelay Integer32,
slcServSiteIdleTimeout Integer32,
slcServSiteRestartDelay Integer32,
slcServSiteCBCPServerAllowNoCallback EnabledState,
slcServSiteNATState EnabledState,
slcServSiteDialbackRetries Integer32
}
slcServSiteIndex OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference index for each Site."
::= { slcServSiteEntry 1 }
slcServSiteName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The unique name assigned to the Site."
::= { slcServSiteEntry 2 }
slcServSitePort OBJECT-TYPE
SYNTAX INTEGER { none(1),
devicePort(2),
upperPCCard(3),
lowerPCCard(4),
usbPort(5),
internalModem(6) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port the Site is assigned to. If the port is devicePort
or usbPort, slcServSitePortId defines which Device Port or USB
Port (with an attached modem) the port is assigned to."
::= { slcServSiteEntry 3 }
slcServSitePortId OBJECT-TYPE
SYNTAX Integer32 (0..48)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The identifier for a Device Port if slcServSitePort equals
devicePort(1), or the identifier for a USB Port if
slcServSitePort equals usbPort(5). Otherwise equals zero."
::= { slcServSiteEntry 4 }
slcServSiteLoginHost OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP or text authentication on dialin, the user login or
CHAP host to use for authentication. If authentication is
successful, the rest of the site parameters will be used for
the connection."
::= { slcServSiteEntry 5 }
slcServSiteCHAPSecret OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP authentication on dialin, the CHAP secret to use for
authentication."
::= { slcServSiteEntry 6 }
slcServSiteTimeout OBJECT-TYPE
SYNTAX Integer32 (0..30)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout (in minutes) for text connections. A value
of 0 indicates that timeouts are disabled."
::= { slcServSiteEntry 7 }
slcServSiteLocalIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections, the local IP Address - all zeros if it
should be negotiated."
::= { slcServSiteEntry 8 }
slcServSiteRemoteIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections, the remote IP Address - all zeros if it
should be negotiated."
::= { slcServSiteEntry 9 }
slcServSiteStaticRouteIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For Dial-on-Demand PPP connections, the static route
IP Address for the remote network."
::= { slcServSiteEntry 10 }
slcServSiteStaticRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For Dial-on-Demand PPP connections, the static route
subnet mask for the remote network."
::= { slcServSiteEntry 11 }
slcServSiteStaticRouteGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For Dial-on-Demand PPP connections, the static route
gateway for the remote network."
::= { slcServSiteEntry 12 }
slcServSiteDialoutNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The phone number to use for dial-out connections."
::= { slcServSiteEntry 13 }
slcServSiteDialoutLogin OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For dial-out connections, the login to use for authenticating
to the remote peer; or on dial-in, the login to use if the
remote peer requests authentication (for example, a two way
CHAP handshake)."
::= { slcServSiteEntry 14 }
slcServSiteDialback OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the site has permission to use modem dialback."
::= { slcServSiteEntry 15 }
slcServSiteDialbackNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The phone number to use for dial-back connections."
::= { slcServSiteEntry 16 }
slcServSiteDialbackDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For Dial-back, specifies the delay between the dial-in and
dial-out portion of the dialing sequence."
::= { slcServSiteEntry 17 }
slcServSiteIdleTimeout OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout (in seconds) for dial-in and dial-on-demand PPP
connections. If no traffic is received for the PPP connection
in the time defined by the idle timeout, the PPP connection
will be terminated. A value of 0 indicates that timeouts are
disabled."
::= { slcServSiteEntry 18 }
slcServSiteRestartDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The delay (in seconds) to wait before restarting dial-out or
dial-on-demand PPP connections."
::= { slcServSiteEntry 19 }
slcServSiteCBCPServerAllowNoCallback OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the SLC will allow the PPP peer to select the
No Callback option during CBCP negotiation."
::= { slcServSiteEntry 20 }
slcServSiteNATState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, use NAT (Network Address Translation) to allow
dial-in and dial-back users to access the network connected
to Eth1 and Eth2."
::= { slcServSiteEntry 21 }
slcServSiteDialbackRetries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For Dial-back, specifies the number of times the SLC will
retry the dial-out portion of the dialing sequence if the
first attempt to dial-out fails."
::= { slcServSiteEntry 22 }
--
-- Auth Group
--
slcAuthLocal OBJECT IDENTIFIER ::= { slcAuth 1 }
slcAuthLocalNumber OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of entries in the Local Users table."
::= { slcAuthLocal 1 }
-- Local Users table
slcAuthLocalUsersTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcAuthLocalUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of Local Users entries. The number of entries
is given by the value of slcAuthLocalNumber."
::= { slcAuthLocal 2 }
slcAuthLocalUserEntry OBJECT-TYPE
SYNTAX SlcAuthLocalUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing a Local Users and it's attributes."
INDEX { slcAuthLocalUserIndex }
::= { slcAuthLocalUsersTable 1 }
SlcAuthLocalUserEntry ::= SEQUENCE {
slcAuthLocalUserIndex Integer32,
slcAuthLocalUserLogin OCTET STRING,
slcAuthLocalUserUID Unsigned32,
slcAuthLocalUserListenPorts OCTET STRING,
slcAuthLocalUserDataPorts OCTET STRING,
slcAuthLocalUserClearPorts OCTET STRING,
slcAuthLocalUserEscapeSeq OCTET STRING,
slcAuthLocalUserBreakSeq OCTET STRING,
slcAuthLocalUserMenu OCTET STRING,
slcAuthLocalUserDialback EnabledState,
slcAuthLocalUserDialbackNum OCTET STRING,
slcAuthLocalUserGroup UserGroup,
slcAuthLocalUserRights UserRights,
slcAuthLocalUserPwdExpires EnabledState,
slcAuthLocalUserChangePwd EnabledState,
slcAuthLocalUserChangePwdNextLogin EnabledState
}
slcAuthLocalUserIndex OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference index for each Local User."
::= { slcAuthLocalUserEntry 1 }
slcAuthLocalUserLogin OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..33))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The login for the Local User. If the user account is locked
(cannot login), the login is appended with a '*' character."
::= { slcAuthLocalUserEntry 2 }
slcAuthLocalUserUID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The unique user identifier number for the Local User."
::= { slcAuthLocalUserEntry 3 }
slcAuthLocalUserListenPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which the Local
User has permission to access via 'connect listen'."
::= { slcAuthLocalUserEntry 4 }
slcAuthLocalUserDataPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which the Local
User has permission to access via 'connect direct'."
::= { slcAuthLocalUserEntry 5 }
slcAuthLocalUserClearPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which the Local
User has permission to clear."
::= { slcAuthLocalUserEntry 6 }
slcAuthLocalUserEscapeSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character sequence which the Local User uses to terminate
connections to Device Ports."
::= { slcAuthLocalUserEntry 7 }
slcAuthLocalUserBreakSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character sequence which the Local User uses to send a
break sequence."
::= { slcAuthLocalUserEntry 8 }
slcAuthLocalUserMenu OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The custom user menu defined for the Local User. If this is
empty, there is no menu defined for the Local User. The menu
name is followed by a slash '/' character and either a 'y' if
the menu is automatically displayed at login, or a 'n' if it
is not automatically displayed at login."
::= { slcAuthLocalUserEntry 9 }
slcAuthLocalUserDialback OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If enabled, the Local User has permission to use modem dialback."
::= { slcAuthLocalUserEntry 10 }
slcAuthLocalUserDialbackNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The dialback number defined for the Local User."
::= { slcAuthLocalUserEntry 11 }
slcAuthLocalUserGroup OBJECT-TYPE
SYNTAX UserGroup
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group assigned to the Local User."
::= { slcAuthLocalUserEntry 12 }
slcAuthLocalUserRights OBJECT-TYPE
SYNTAX UserRights
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The rights assigned to the Local User."
::= { slcAuthLocalUserEntry 13 }
slcAuthLocalUserPwdExpires OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the local user's password will expire."
::= { slcAuthLocalUserEntry 14 }
slcAuthLocalUserChangePwd OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the local user can change their password."
::= { slcAuthLocalUserEntry 15 }
slcAuthLocalUserChangePwdNextLogin OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the local user must change their password at
their next login."
::= { slcAuthLocalUserEntry 16 }
slcAuthLocalState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, Local Users are used for authentication."
::= { slcAuthLocal 3 }
slcAuthLocalOrder OBJECT-TYPE
SYNTAX AuthOrder
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The authentication order of Local Users in authentication
methods."
::= { slcAuthLocal 4 }
slcAuthLocalComplexPasswords OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, Local Users are required to use complex passwords
that are at least 8 characters long and contain at least one
uppercase character, one lowercase character, one digit, and
one non-alphanumeric character."
::= { slcAuthLocal 5 }
slcAuthLocalUseNextMethod OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object applies to all authentication methods, not just
Local Users. If enabled, authentication will occur using
all methods, in the order of their precedence, until a
successful authentication occurs. If disabled, only the
first authentication method that responds will be used."
::= { slcAuthLocal 6 }
slcAuthLocalAllowReuse OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, local users can reuse old passwords."
::= { slcAuthLocal 7 }
slcAuthLocalReuseHistory OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of passwords a local user must use before reusing
an old password."
::= { slcAuthLocal 8 }
slcAuthLocalPasswordLifetime OBJECT-TYPE
SYNTAX Integer32 (1..365)
UNITS "days"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of days until a password expires."
::= { slcAuthLocal 9 }
slcAuthLocalWarningPeriod OBJECT-TYPE
SYNTAX Integer32 (0..90)
UNITS "days"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of days before a password expires that a local
user is warned about the expiring password. A value of 0
indicates that this feature is disabled."
::= { slcAuthLocal 10 }
slcAuthLocalMaxLoginAttempts OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times a local user can attempt to log in
unsuccessfully before the SLC locks the user out. A value
of 0 indicates that this feature is disabled."
::= { slcAuthLocal 11 }
slcAuthLocalLockoutPeriod OBJECT-TYPE
SYNTAX Integer32 (0..90)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of minutes the locked-out user must wait before
trying to log in to to the SLC again. A value of 0 indicates
that this feature is disabled."
::= { slcAuthLocal 12 }
slcAuthLocalMultipleSysadminLogins OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, multiple sysadmin logins to the web are allowed."
::= { slcAuthLocal 13 }
slcAuthLocalSysadminConsoleOnly OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the sysadmin can only access the SLC via the
Console Port."
::= { slcAuthLocal 14 }
slcAuthNIS OBJECT IDENTIFIER ::= { slcAuth 2 }
slcAuthNISState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, NIS is used for authentication."
::= { slcAuthNIS 1 }
slcAuthNISOrder OBJECT-TYPE
SYNTAX AuthOrder
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication order of NIS in remote authentication methods."
::= { slcAuthNIS 2 }
slcAuthNISDomain OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The NIS domain."
::= { slcAuthNIS 3 }
slcAuthNISBroadcast OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the SLC broadcasts for the NIS server."
::= { slcAuthNIS 4 }
slcAuthNISMaster OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP Address of the NIS master server."
::= { slcAuthNIS 5 }
slcAuthNISSlave1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP Address of the NIS slave server #1."
::= { slcAuthNIS 6 }
slcAuthNISSlave2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP Address of the NIS slave server #2."
::= { slcAuthNIS 7 }
slcAuthNISSlave3 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP Address of the NIS slave server #3."
::= { slcAuthNIS 8 }
slcAuthNISGroup OBJECT-TYPE
SYNTAX UserGroup
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group assigned to NIS users who login to the SLC and
do not have group/rights defined in the Remote User database."
::= { slcAuthNIS 9 }
slcAuthNISRights OBJECT-TYPE
SYNTAX UserRights
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The rights assigned to NIS users who login to the SLC and
do not have group/rights defined in the Remote User database."
::= { slcAuthNIS 10 }
slcAuthNISMenu OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The custom user menu defined for all NIS users who login
to the SLC. If this is empty, there is no menu defined for
NIS Users."
::= { slcAuthNIS 11 }
slcAuthNISListenPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which users
authenticated via NIS have permission to access via
'connect listen'."
::= { slcAuthNIS 12 }
slcAuthNISDataPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which users
authenticated via NIS have permission to access via
'connect direct'."
::= { slcAuthNIS 13 }
slcAuthNISClearPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which users
authenticated via NIS have permission to clear."
::= { slcAuthNIS 14 }
slcAuthNISSlave4 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP Address of the NIS slave server #4."
::= { slcAuthNIS 15 }
slcAuthNISSlave5 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP Address of the NIS slave server #5."
::= { slcAuthNIS 16 }
slcAuthNISEscapeSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character sequence which the NIS user uses to terminate
connections to Device Ports."
::= { slcAuthNIS 17 }
slcAuthNISBreakSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character sequence which the NIS user uses to send a
break sequence."
::= { slcAuthNIS 18 }
slcAuthNISDialback OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, NIS users have permission to use modem dialback."
::= { slcAuthNIS 19 }
slcAuthNISDialbackNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The dialback number defined for NIS users."
::= { slcAuthNIS 20 }
slcAuthLDAP OBJECT IDENTIFIER ::= { slcAuth 3 }
slcAuthLDAPState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, LDAP is used for authentication."
::= { slcAuthLDAP 1 }
slcAuthLDAPOrder OBJECT-TYPE
SYNTAX AuthOrder
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication order of LDAP in remote authentication methods."
::= { slcAuthLDAP 2 }
slcAuthLDAPServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv4 Address of the LDAP server."
::= { slcAuthLDAP 3 }
slcAuthLDAPBase OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The LDAP Base."
::= { slcAuthLDAP 4 }
slcAuthLDAPBindName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The LDAP Bind Name."
::= { slcAuthLDAP 5 }
slcAuthLDAPPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The LDAP TCP Port Number."
::= { slcAuthLDAP 6 }
slcAuthLDAPADSupport OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, Active Directory support is enabled for LDAP."
::= { slcAuthLDAP 7 }
slcAuthLDAPGroup OBJECT-TYPE
SYNTAX UserGroup
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group assigned to LDAP users who login to the SLC and
do not have group/rights defined in the Remote User database."
::= { slcAuthLDAP 8 }
slcAuthLDAPRights OBJECT-TYPE
SYNTAX UserRights
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The rights assigned to LDAP users who login to the SLC and
do not have group/rights defined in the Remote User database."
::= { slcAuthLDAP 9 }
slcAuthLDAPMenu OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The custom user menu defined for all LDAP users who login
to the SLC. If this is empty, there is no menu defined for
LDAP Users."
::= { slcAuthLDAP 10 }
slcAuthLDAPListenPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which users
authenticated via LDAP have permission to access via
'connect listen'."
::= { slcAuthLDAP 11 }
slcAuthLDAPDataPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which users
authenticated via LDAP have permission to access via
'connect direct'."
::= { slcAuthLDAP 12 }
slcAuthLDAPClearPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which users
authenticated via LDAP have permission to clear."
::= { slcAuthLDAP 13 }
slcAuthLDAPEncrypt OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, encrypt messages between the SLC and the LDAP
server."
::= { slcAuthLDAP 14 }
slcAuthLDAPEscapeSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character sequence which the LDAP user uses to terminate
connections to Device Ports."
::= { slcAuthLDAP 15 }
slcAuthLDAPBreakSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character sequence which the LDAP user uses to send a
break sequence."
::= { slcAuthLDAP 16 }
slcAuthLDAPBindWithLogin OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, bind to the LDAP server using the current login
and password. The $login token in slcAuthLDAPBindName will
be replaced with the current login."
::= { slcAuthLDAP 17 }
slcAuthLDAPUseLDAPSchema OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, attributes and permissions for remote users are
retrieved from an LDAP server."
::= { slcAuthLDAP 18 }
slcAuthLDAPDialback OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, LDAP users have permission to use modem dialback."
::= { slcAuthLDAP 19 }
slcAuthLDAPDialbackNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The dialback number defined for LDAP users."
::= { slcAuthLDAP 20 }
slcAuthLDAPUserFilter OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The attribute used by the LDAP server for user logins."
::= { slcAuthLDAP 21 }
slcAuthLDAPGroupFilter OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The objectclass used by the LDAP server for groups."
::= { slcAuthLDAP 22 }
slcAuthLDAPGroupMembershipAttr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The attribute used by the LDAP server for group membership.
This attribute may be use to search for a name (ie, msmith)
or a Distinguished Name
(ie, uid=msmith,ou=People,dc=lantronix,dc=com)."
::= { slcAuthLDAP 23 }
slcAuthLDAPGroupMembershipDN OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the string given by slcAuthLDAPGroupMembershipAttr
is a Distinguished Name (DN). Otherwise the string is a name."
::= { slcAuthLDAP 24 }
slcAuthLDAPServer2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv4 Address of the secondary/backup LDAP server."
::= { slcAuthLDAP 25 }
slcAuthLDAPServerIPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv6 Address of the LDAP server."
::= { slcAuthLDAP 26 }
slcAuthLDAPServer2IPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv6 Address of the secondary/backup LDAP server."
::= { slcAuthLDAP 27 }
slcAuthRADIUS OBJECT IDENTIFIER ::= { slcAuth 4 }
slcAuthRADIUSState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, RADIUS is used for authentication."
::= { slcAuthRADIUS 1 }
slcAuthRADIUSOrder OBJECT-TYPE
SYNTAX AuthOrder
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication order of RADIUS in remote authentication methods."
::= { slcAuthRADIUS 2 }
slcAuthRADIUSTimeout OBJECT-TYPE
SYNTAX Integer32 (0..30)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RADIUS Timeout in seconds. A value of 0 indicates
that timeouts are disabled."
::= { slcAuthRADIUS 3 }
-- RADIUS Servers table
slcAuthRADIUSServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcAuthRADIUSServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of RADIUS servers."
::= { slcAuthRADIUS 4 }
slcAuthRADIUSServerEntry OBJECT-TYPE
SYNTAX SlcAuthRADIUSServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing a RADIUS server and it's parameters."
INDEX { slcAuthRADIUSServerIndex }
::= { slcAuthRADIUSServerTable 1 }
SlcAuthRADIUSServerEntry ::= SEQUENCE {
slcAuthRADIUSServerIndex Integer32,
slcAuthRADIUSServer IpAddress,
slcAuthRADIUSPort Integer32,
slcAuthRADIUSServerIPv6 Ipv6Address
}
slcAuthRADIUSServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference index for each RADIUS server."
::= { slcAuthRADIUSServerEntry 1 }
slcAuthRADIUSServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv4 Address of the RADIUS server."
::= { slcAuthRADIUSServerEntry 2 }
slcAuthRADIUSPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RADIUS Server TCP Port Number."
::= { slcAuthRADIUSServerEntry 3 }
slcAuthRADIUSServerIPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv6 Address of the RADIUS server."
::= { slcAuthRADIUSServerEntry 4 }
slcAuthRADIUSGroup OBJECT-TYPE
SYNTAX UserGroup
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group assigned to RADIUS users who login to the SLC and
do not have group/rights defined in the Remote User database."
::= { slcAuthRADIUS 5 }
slcAuthRADIUSRights OBJECT-TYPE
SYNTAX UserRights
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The rights assigned to RADIUS users who login to the SLC and
do not have group/rights defined in the Remote User database."
::= { slcAuthRADIUS 6 }
slcAuthRADIUSMenu OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The custom user menu defined for all RADIUS users who login
to the SLC. If this is empty, there is no menu defined for
RADIUS Users."
::= { slcAuthRADIUS 7 }
slcAuthRADIUSListenPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which users
authenticated via RADIUS have permission to access via
'connect listen'."
::= { slcAuthRADIUS 8 }
slcAuthRADIUSDataPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which users
authenticated via RADIUS have permission to access via
'connect direct'."
::= { slcAuthRADIUS 9 }
slcAuthRADIUSClearPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which users
authenticated via RADIUS have permission to clear."
::= { slcAuthRADIUS 10 }
slcAuthRADIUSEscapeSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character sequence which the RADIUS user uses to terminate
connections to Device Ports."
::= { slcAuthRADIUS 11 }
slcAuthRADIUSBreakSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character sequence which the RADIUS user uses to send a
break sequence."
::= { slcAuthRADIUS 12 }
slcAuthRADIUSDialback OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If enabled, RADIUS users have permission to use modem dialback."
::= { slcAuthRADIUS 13 }
slcAuthRADIUSDialbackNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The dialback number defined for RADIUS users."
::= { slcAuthRADIUS 14 }
slcAuthRADIUSUseVSA OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the SLC will obtain remote user attributes
(group/permissions and port access) from the RADIUS server
via the Vendor-Specific Attribute (VSA)."
::= { slcAuthRADIUS 15 }
slcAuthKerberos OBJECT IDENTIFIER ::= { slcAuth 5 }
slcAuthKerbState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, Kerberos is used for authentication."
::= { slcAuthKerberos 1 }
slcAuthKerbOrder OBJECT-TYPE
SYNTAX AuthOrder
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication order of Kerberos in remote authentication methods."
::= { slcAuthKerberos 2 }
slcAuthKerbRealm OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Kerberos Realm."
::= { slcAuthKerberos 3 }
slcAuthKerbKDC OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Kerberos KDC."
::= { slcAuthKerberos 4 }
slcAuthKerbKDCIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv4 Address of the Kerberos Key Distribution Server."
::= { slcAuthKerberos 5 }
slcAuthKerbKDCPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Kerberos KDC Port Number."
::= { slcAuthKerberos 6 }
slcAuthKerbUseLDAP OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, LDAP is used for lookups."
::= { slcAuthKerberos 7 }
slcAuthKerbGroup OBJECT-TYPE
SYNTAX UserGroup
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group assigned to Kerberos users who login to the SLC and
do not have group/rights defined in the Remote User database."
::= { slcAuthKerberos 8 }
slcAuthKerbRights OBJECT-TYPE
SYNTAX UserRights
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The rights assigned to Kerberos users who login to the SLC and
do not have group/rights defined in the Remote User database."
::= { slcAuthKerberos 9 }
slcAuthKerbMenu OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The custom user menu defined for all Kerberos users who login
to the SLC. If this is empty, there is no menu defined for
Kerberos Users."
::= { slcAuthKerberos 10 }
slcAuthKerbListenPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which users
authenticated via Kerberos have permission to access via
'connect listen'."
::= { slcAuthKerberos 11 }
slcAuthKerbDataPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which users
authenticated via Kerberos have permission to access via
'connect direct'."
::= { slcAuthKerberos 12 }
slcAuthKerbClearPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which users
authenticated via Kerberos have permission to clear."
::= { slcAuthKerberos 13 }
slcAuthKerbEscapeSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character sequence which the Kerberos user uses to
terminate connections to Device Ports."
::= { slcAuthKerberos 14 }
slcAuthKerbBreakSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character sequence which the Kerberos user uses to send a
break sequence."
::= { slcAuthKerberos 15 }
slcAuthKerbDialback OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If enabled, Kerberos users have permission to use modem dialback."
::= { slcAuthKerberos 16 }
slcAuthKerbDialbackNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The dialback number defined for Kerberos users."
::= { slcAuthKerberos 17 }
slcAuthKerbKDCIPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv6 Address of the Kerberos Key Distribution Server."
::= { slcAuthKerberos 18 }
slcAuthTACACS OBJECT IDENTIFIER ::= { slcAuth 6 }
slcAuthTACACSState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, TACACS is used for authentication."
::= { slcAuthTACACS 1 }
slcAuthTACACSOrder OBJECT-TYPE
SYNTAX AuthOrder
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication order of TACACS in remote authentication methods."
::= { slcAuthTACACS 2 }
slcAuthTACACSServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv4 Address of the first TACACS server."
::= { slcAuthTACACS 3 }
slcAuthTACACSEncrypt OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If enabled, encrypt messages between the SLC and the TACACS server."
::= { slcAuthTACACS 4 }
slcAuthTACACSGroup OBJECT-TYPE
SYNTAX UserGroup
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group assigned to TACACS users who login to the SLC and
do not have group/rights defined in the Remote User database."
::= { slcAuthTACACS 5 }
slcAuthTACACSRights OBJECT-TYPE
SYNTAX UserRights
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The rights assigned to TACACS users who login to the SLC and
do not have group/rights defined in the Remote User database."
::= { slcAuthTACACS 6 }
slcAuthTACACSMenu OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The custom user menu defined for all TACACS users who login
to the SLC. If this is empty, there is no menu defined for
TACACS Users."
::= { slcAuthTACACS 7 }
slcAuthTACACSListenPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which users
authenticated via TACACS have permission to access via
'connect listen'."
::= { slcAuthTACACS 8 }
slcAuthTACACSDataPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which users
authenticated via TACACS have permission to access via
'connect direct'."
::= { slcAuthTACACS 9 }
slcAuthTACACSClearPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which users
authenticated via TACACS have permission to clear."
::= { slcAuthTACACS 10 }
slcAuthTACACSServer2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv4 Address of the second TACACS server."
::= { slcAuthTACACS 11 }
slcAuthTACACSServer3 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv4 Address of the third TACACS server."
::= { slcAuthTACACS 12 }
slcAuthTACACSEscapeSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character sequence which the TACACS user uses to terminate
connections to Device Ports."
::= { slcAuthTACACS 13 }
slcAuthTACACSBreakSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character sequence which the TACACS user uses to send a
break sequence."
::= { slcAuthTACACS 14 }
slcAuthTACACSDialback OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If enabled, TACACS users have permission to use modem dialback."
::= { slcAuthTACACS 15 }
slcAuthTACACSDialbackNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The dialback number defined for TACACS users."
::= { slcAuthTACACS 16 }
slcAuthTACACSAuthService OBJECT-TYPE
SYNTAX INTEGER { pppPAP(1), pppCHAP(2), asciiLogin(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of service used to pass the authentications tokens
(e.g., login and password) between the SLC and the TACACS+
server."
::= { slcAuthTACACS 17 }
slcAuthTACACSServerIPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv6 Address of the first TACACS server."
::= { slcAuthTACACS 18 }
slcAuthTACACSServer2IPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv6 Address of the second TACACS server."
::= { slcAuthTACACS 19 }
slcAuthTACACSServer3IPv6 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IPv6 Address of the third TACACS server."
::= { slcAuthTACACS 20 }
slcAuthRemote OBJECT IDENTIFIER ::= { slcAuth 7 }
slcAuthRemoteNumber OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of entries in the Remote Users table."
::= { slcAuthRemote 1 }
-- Remote Users table
slcAuthRemoteUsersTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcAuthRemoteUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of Remote Users entries. The number of entries
is given by the value of slcAuthRemoteNumber."
::= { slcAuthRemote 2 }
slcAuthRemoteUserEntry OBJECT-TYPE
SYNTAX SlcAuthRemoteUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing a Remote User and its attributes."
INDEX { slcAuthRemoteUserIndex }
::= { slcAuthRemoteUsersTable 1 }
SlcAuthRemoteUserEntry ::= SEQUENCE {
slcAuthRemoteUserIndex Integer32,
slcAuthRemoteUserLogin OCTET STRING,
slcAuthRemoteUserGroup UserGroup,
slcAuthRemoteUserRights UserRights,
slcAuthRemoteUserListenPorts OCTET STRING,
slcAuthRemoteUserDataPorts OCTET STRING,
slcAuthRemoteUserClearPorts OCTET STRING,
slcAuthRemoteUserEscapeSeq OCTET STRING,
slcAuthRemoteUserBreakSeq OCTET STRING,
slcAuthRemoteUserMenu OCTET STRING,
slcAuthRemoteUserLocked EnabledState,
slcAuthRemoteUserDialback EnabledState,
slcAuthRemoteUserDialbackNum OCTET STRING
}
slcAuthRemoteUserIndex OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference index for each Remote User."
::= { slcAuthRemoteUserEntry 1 }
slcAuthRemoteUserLogin OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The login for the Remote User."
::= { slcAuthRemoteUserEntry 2 }
slcAuthRemoteUserGroup OBJECT-TYPE
SYNTAX UserGroup
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group assigned to the Remote User."
::= { slcAuthRemoteUserEntry 3 }
slcAuthRemoteUserRights OBJECT-TYPE
SYNTAX UserRights
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The rights assigned to the Remote User."
::= { slcAuthRemoteUserEntry 4 }
slcAuthRemoteUserListenPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which the Remote
User has permission to access via 'connect listen'."
::= { slcAuthRemoteUserEntry 5 }
slcAuthRemoteUserDataPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which the Remote
User has permission to access via 'connect direct'."
::= { slcAuthRemoteUserEntry 6 }
slcAuthRemoteUserClearPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which the Remote
User has permission to clear."
::= { slcAuthRemoteUserEntry 7 }
slcAuthRemoteUserEscapeSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character sequence which the Remote User uses to terminate
connections to Device Ports."
::= { slcAuthRemoteUserEntry 8 }
slcAuthRemoteUserBreakSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character sequence which the Remote User uses to send a
break sequence."
::= { slcAuthRemoteUserEntry 9 }
slcAuthRemoteUserMenu OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The custom user menu defined for the Remote User. If this is
empty, there is no menu defined for the Remote User. The menu
name is followed by a slash '/' character and either a 'y' if
the menu is automatically displayed at login, or a 'n' if it
is not automatically displayed at login."
::= { slcAuthRemoteUserEntry 10 }
slcAuthRemoteUserLocked OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the Remote User's account is locked (blocked)."
::= { slcAuthRemoteUserEntry 11 }
slcAuthRemoteUserDialback OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If enabled, the Remote User has permission to use modem dialback."
::= { slcAuthRemoteUserEntry 12 }
slcAuthRemoteUserDialbackNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The dialback number defined for the Remote User."
::= { slcAuthRemoteUserEntry 13 }
slcAuthRemoteAuthListOnly OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, remote users who log into the SLC will only be
authenticated if they are listed in the remote user list."
::= { slcAuthRemote 3 }
slcAuthGroups OBJECT IDENTIFIER ::= { slcAuth 8 }
slcAuthGroupsNumber OBJECT-TYPE
SYNTAX Integer32 (0..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of entries in the Groups table."
::= { slcAuthGroups 1 }
-- Groups table
slcAuthGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcAuthGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of Groups entries. The number of entries
is given by the value of slcAuthGroupsNumber."
::= { slcAuthGroups 2 }
slcAuthGroupEntry OBJECT-TYPE
SYNTAX SlcAuthGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing a Remote User and its attributes."
INDEX { slcAuthGroupIndex }
::= { slcAuthGroupsTable 1 }
SlcAuthGroupEntry ::= SEQUENCE {
slcAuthGroupIndex Integer32,
slcAuthGroupName OCTET STRING,
slcAuthGroupRights UserRights,
slcAuthGroupListenPorts OCTET STRING,
slcAuthGroupDataPorts OCTET STRING,
slcAuthGroupClearPorts OCTET STRING,
slcAuthGroupEscapeSeq OCTET STRING,
slcAuthGroupBreakSeq OCTET STRING,
slcAuthGroupMenu OCTET STRING,
slcAuthGroupDialback EnabledState,
slcAuthGroupDialbackNum OCTET STRING
}
slcAuthGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference index for each Group."
::= { slcAuthGroupEntry 1 }
slcAuthGroupName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name for the Group."
::= { slcAuthGroupEntry 2 }
slcAuthGroupRights OBJECT-TYPE
SYNTAX UserRights
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The rights assigned to the Group."
::= { slcAuthGroupEntry 3 }
slcAuthGroupListenPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which the Group
has permission to access via 'connect listen'."
::= { slcAuthGroupEntry 4 }
slcAuthGroupDataPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which the Group
has permission to access via 'connect direct'."
::= { slcAuthGroupEntry 5 }
slcAuthGroupClearPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Device Ports and PC Card slots/USB ports which the Group
has permission to clear."
::= { slcAuthGroupEntry 6 }
slcAuthGroupEscapeSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character sequence which the Group uses to terminate
connections to Device Ports."
::= { slcAuthGroupEntry 7 }
slcAuthGroupBreakSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character sequence which the Group uses to send a
break sequence."
::= { slcAuthGroupEntry 8 }
slcAuthGroupMenu OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The custom user menu defined for the Group. If this is
empty, there is no menu defined for the Group. The menu
name is followed by a slash '/' character and either a 'y' if
the menu is automatically displayed at login, or a 'n' if it
is not automatically displayed at login."
::= { slcAuthGroupEntry 9 }
slcAuthGroupDialback OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If enabled, the Group has permission to use modem dialback."
::= { slcAuthGroupEntry 10 }
slcAuthGroupDialbackNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The dialback number defined for the Group."
::= { slcAuthGroupEntry 11 }
--
-- Devices Group
--
slcDevConsolePort OBJECT IDENTIFIER ::= { slcDevices 1 }
slcDevConBaud OBJECT-TYPE
SYNTAX Integer32
( 300 | 600 | 1200 | 2400 | 4800 |
9600 | 19200 | 38400 | 57600 | 115200 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The baud rate of the Console Port."
::= { slcDevConsolePort 1 }
slcDevConDataBits OBJECT-TYPE
SYNTAX Integer32 ( 7 | 8 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The data bits of the Console Port."
::= { slcDevConsolePort 2 }
slcDevConStopBits OBJECT-TYPE
SYNTAX Integer32 ( 1 | 2 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The stop bits of the Console Port."
::= { slcDevConsolePort 3 }
slcDevConParity OBJECT-TYPE
SYNTAX INTEGER { none(1), odd(2), even(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The parity of the Console Port."
::= { slcDevConsolePort 4 }
slcDevConFlowControl OBJECT-TYPE
SYNTAX INTEGER { none(1), xonxoff(2), rtscts(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The flow control of the Console Port."
::= { slcDevConsolePort 5 }
slcDevConTimeout OBJECT-TYPE
SYNTAX Integer32 (0..30)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout (in minutes) for logins to the Console Port.
A value of 0 indicates that timeouts are disabled."
::= { slcDevConsolePort 6 }
slcDevConShowLines OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, upon connecting to the Console Port, a series of
characters (or lines) output to the Console Port before it
was connected to are displayed."
::= { slcDevConsolePort 7 }
slcDevConNumberShowLines OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If slcDevConShowLines is enabled, the number of lines that
are displayed upon connecting to the Console Port."
::= { slcDevConsolePort 8 }
slcDevConGroup OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group or groups that may access the Console Port."
::= { slcDevConsolePort 9 }
slcDevDevicePorts OBJECT IDENTIFIER ::= { slcDevices 2 }
slcDevPortGlobal OBJECT IDENTIFIER ::= { slcDevDevicePorts 1 }
slcDevGlobalListenPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "The Device Ports which remotely authenticated users have
permission to access via 'connect listen'. This object has
been replaced by permissions for each remote authentication
method: slcAuthNISListenPorts, slcAuthLDAPListenPorts,
slcAuthRADIUSListenPorts, slcAuthKerbListenPorts,
slcAuthTACACSListenPorts."
::= { slcDevPortGlobal 1 }
slcDevGlobalDataPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "The Device Ports which remotely authenticated users have
permission to access via 'connect direct'. This object has
been replaced by permissions for each remote authentication
method: slcAuthNISDataPorts, slcAuthLDAPDataPorts,
slcAuthRADIUSDataPorts, slcAuthKerbDataPorts,
slcAuthTACACSDataPorts."
::= { slcDevPortGlobal 2 }
slcDevGlobalClearPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "The Device Ports which remotely authenticated users have
permission to clear. This object has been replaced by
permissions for each remote authentication method:
slcAuthNISClearPorts, slcAuthLDAPClearPorts,
slcAuthRADIUSClearPorts, slcAuthKerbClearPorts,
slcAuthTACACSClearPorts."
::= { slcDevPortGlobal 3 }
slcDevGlobalStartTelnetPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The starting TCP port for Telnet in connections
to Device Ports."
::= { slcDevPortGlobal 4 }
slcDevGlobalStartSSHPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The starting TCP port for SSH in connections
to Device Ports."
::= { slcDevPortGlobal 5 }
slcDevGlobalStartTCPPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The starting TCP port for TCP in connections
to Device Ports."
::= { slcDevPortGlobal 6 }
slcDevGlobalMaxDirect OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "The maximum number of direct connects allowed for each
Device Port."
::= { slcDevPortGlobal 7 }
slcDevPortConfig OBJECT IDENTIFIER ::= { slcDevDevicePorts 2 }
slcDevPortCfgNumber OBJECT-TYPE
SYNTAX Integer32 ( 8 | 16 | 24 | 32 | 40 | 48 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the Device Port Configuration table."
::= { slcDevPortConfig 1 }
-- Device Port Configuration table.
slcDevPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcDevPortCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for managing Device Port configuration. The number of
entries is given by the value of slcDevPortCfgNumber."
::= { slcDevPortConfig 2 }
slcDevPortCfgEntry OBJECT-TYPE
SYNTAX SlcDevPortCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing all configuration settings for a Device Port."
INDEX { slcDevPortId }
::= { slcDevPortCfgTable 1 }
SlcDevPortCfgEntry ::= SEQUENCE {
slcDevPortId Integer32,
-- General settings
slcDevPortCfgName OCTET STRING,
slcDevPortCfgDevice INTEGER,
slcDevPortCfgDevLogin OCTET STRING,
slcDevPortCfgBreakSeq OCTET STRING,
-- IP settings
slcDevPortCfgTelnetState EnabledState,
slcDevPortCfgTelnetPort Integer32,
slcDevPortCfgTelnetAuth EnabledState,
slcDevPortCfgSSHState EnabledState,
slcDevPortCfgSSHPort Integer32,
slcDevPortCfgSSHAuth EnabledState,
slcDevPortCfgTCPState EnabledState,
slcDevPortCfgTCPPort Integer32,
slcDevPortCfgTCPAuth EnabledState,
slcDevPortCfgIP IpAddress,
-- Data (serial) settings
slcDevPortCfgBaud Integer32,
slcDevPortCfgDataBits Integer32,
slcDevPortCfgStopBits Integer32,
slcDevPortCfgParity INTEGER,
slcDevPortCfgFlowControl INTEGER,
slcDevPortCfgLogins EnabledState,
slcDevPortCfgConnectDSR EnabledState,
slcDevPortCfgDisconnectDSR EnabledState,
-- Modem settings
slcDevPortCfgModemState INTEGER,
slcDevPortCfgModemMode INTEGER,
slcDevPortCfgLocalIP IpAddress,
slcDevPortCfgRemoteIP IpAddress,
slcDevPortCfgAuth INTEGER,
slcDevPortCfgCHAPHost OCTET STRING,
slcDevPortCfgInitScript OCTET STRING,
slcDevPortCfgTimeout Integer32,
slcDevPortCfgDialoutNum OCTET STRING,
slcDevPortCfgDialoutLogin OCTET STRING,
slcDevPortCfgDialbackMode INTEGER,
slcDevPortCfgDialbackNum OCTET STRING,
slcDevPortCfgNATState EnabledState,
-- Logging settings
slcDevPortCfgLocalState EnabledState,
slcDevPortCfgNFSFileState EnabledState,
slcDevPortCfgNFSDir OCTET STRING,
slcDevPortCfgNFSMaxFiles Integer32,
slcDevPortCfgNFSMaxSize Integer32,
slcDevPortCfgEmailState EnabledState,
slcDevPortCfgEmailTrigger INTEGER,
slcDevPortCfgEmailByteThresh Integer32,
slcDevPortCfgEmailDelay Integer32,
slcDevPortCfgEmailRestartDelay Integer32,
slcDevPortCfgEmailTextString OCTET STRING,
slcDevPortCfgEmailTo OCTET STRING,
slcDevPortCfgEmailSubject OCTET STRING,
slcDevPortCfgPCCardState EnabledState,
slcDevPortCfgPCCardLogTo INTEGER,
slcDevPortCfgPCCardMaxFiles Integer32,
slcDevPortCfgPCCardMaxSize Integer32,
-- Actions to control Device Port
slcDevPortCfgAction INTEGER,
-- Additional Settings
slcDevPortCfgEmailSend INTEGER,
slcDevPortCfgBanner OCTET STRING,
slcDevPortCfgIdleTimeout Integer32,
slcDevPortCfgRestartDelay Integer32,
slcDevPortCfgCallerIdLogging EnabledState,
slcDevPortCfgCallerIdATCmd OCTET STRING,
slcDevPortCfgDODAuth INTEGER,
slcDevPortCfgDODCHAPHost OCTET STRING,
slcDevPortCfgSLMLoggingState EnabledState,
slcDevPortCfgSLMNMS OCTET STRING,
slcDevPortCfgSLMByteThresh Integer32,
slcDevPortCfgSLMTimeFrame Integer32,
slcDevPortCfgWebColumns Integer32,
slcDevPortCfgWebRows Integer32,
slcDevPortCfgSyslogState EnabledState,
slcDevPortCfgHostList OCTET STRING,
slcDevPortCfgDevLowTemp Integer32,
slcDevPortCfgDevHighTemp Integer32,
slcDevPortCfgDevTemperature OCTET STRING,
slcDevPortCfgDevLowHumidity Integer32,
slcDevPortCfgDevHighHumidity Integer32,
slcDevPortCfgDevHumidity OCTET STRING,
slcDevPortCfgDevTraps EnabledState,
slcDevPortCfgShowLines EnabledState,
slcDevPortCfgNumberShowLines Integer32,
slcDevPortCfgViewPortLog EnabledState,
slcDevPortCfgPortLogSeq OCTET STRING,
slcDevPortCfgMaxDirectConnects Integer32,
slcDevPortCfgTelnetTimeout Integer32,
slcDevPortCfgSSHTimeout Integer32,
slcDevPortCfgTCPTimeout Integer32,
slcDevPortCfgCBCPClientType INTEGER,
slcDevPortCfgCBCPServerAllowNoCallback EnabledState,
slcDevPortCfgDialbackDelay Integer32,
slcDevPortCfgUSBState EnabledState,
slcDevPortCfgUSBLogTo Integer32,
slcDevPortCfgUSBMaxFiles Integer32,
slcDevPortCfgUSBMaxSize Integer32,
slcDevPortCfgCHAPAuthLocalUsers EnabledState,
slcDevPortCfgUseSites EnabledState,
slcDevPortCfgDialbackRetries Integer32,
slcDevPortCfgGroup OCTET STRING,
slcDevPortCfgIPMask IpAddress,
slcDevPortCfgDevPrompt OCTET STRING,
slcDevPortCfgDevNumOutlets Integer32,
slcDevPortCfgDevNumExpOutlets Integer32,
slcDevPortCfgReversePinout EnabledState,
slcDevPortCfgUSBVBUS EnabledState,
slcDevPortCfgAssertDTR EnabledState,
slcDevPortCfgPortType INTEGER,
slcDevPortCfgTelnetTimeoutDataDirection TimeoutDataDirection,
slcDevPortCfgSSHTimeoutDataDirection TimeoutDataDirection,
slcDevPortCfgTCPTimeoutDataDirection TimeoutDataDirection,
slcDevPortCfgIdleTimeoutMessage EnabledState,
slcDevPortCfgNumberOfSessionsMessage EnabledState,
slcDevPortCfgMinimizeLatency EnabledState,
slcDevPortCfgTelnetSoftIAC EnabledState,
slcDevPortCfgSendTermString EnabledState,
slcDevPortCfgTerminationString OCTET STRING,
slcDevPortCfgPowerManagementSeq OCTET STRING,
slcDevPortCfgPowerSupplies OCTET STRING,
slcDevPortCfgToggleDTR EnabledState,
slcDevPortCfgTokenAction OCTET STRING,
slcDevPortCfgTokenSendString OCTET STRING,
slcDevPortCfgTokenPowerSupply OCTET STRING,
slcDevPortCfgTokenPowerAction INTEGER
}
slcDevPortId OBJECT-TYPE
SYNTAX Integer32 (1..48)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The identifier for a Device Port."
::= { slcDevPortCfgEntry 1 }
slcDevPortCfgName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the Device Port."
::= { slcDevPortCfgEntry 2 }
slcDevPortCfgDevice OBJECT-TYPE
SYNTAX INTEGER { none(1),
slp8(2),
slp16(3),
slp8Exp8(4),
slp8Exp16(5),
slp16Exp8(6),
slp16Exp16(7),
sensorsoft(8),
servertech(9),
rpm(10) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The device that is connected to the Device Port. The 'slp*'
and 'servertech' values are deprecated and have been replaced
by the RPM functionality."
::= { slcDevPortCfgEntry 3 }
slcDevPortCfgDevLogin OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The login used to authenticate to the device connected
to the Device Port."
::= { slcDevPortCfgEntry 4 }
slcDevPortCfgBreakSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character sequence for the Device Port to send a break."
::= { slcDevPortCfgEntry 5 }
slcDevPortCfgTelnetState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, Telnet connections to the Device Port are allowed."
::= { slcDevPortCfgEntry 6 }
slcDevPortCfgTelnetPort OBJECT-TYPE
SYNTAX Integer32 (1025..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCP Port number for Telnet in connections."
::= { slcDevPortCfgEntry 7 }
slcDevPortCfgTelnetAuth OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the user is required to authenticate to access
a Device Port with Telnet."
::= { slcDevPortCfgEntry 8 }
slcDevPortCfgSSHState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, SSH connections to the Device Port are allowed."
::= { slcDevPortCfgEntry 9 }
slcDevPortCfgSSHPort OBJECT-TYPE
SYNTAX Integer32 (1025..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCP Port number for SSH in connections."
::= { slcDevPortCfgEntry 10 }
slcDevPortCfgSSHAuth OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the user is required to authenticate to access
a Device Port with SSH."
::= { slcDevPortCfgEntry 11 }
slcDevPortCfgTCPState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, TCP connections to the Device Port are allowed."
::= { slcDevPortCfgEntry 12 }
slcDevPortCfgTCPPort OBJECT-TYPE
SYNTAX Integer32 (1025..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCP Port number for TCP in connections."
::= { slcDevPortCfgEntry 13 }
slcDevPortCfgTCPAuth OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the user is required to authenticate to access
a Device Port with TCP."
::= { slcDevPortCfgEntry 14 }
slcDevPortCfgIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP Address for Telnet, SSH or TCP in to a Device Port."
::= { slcDevPortCfgEntry 15 }
slcDevPortCfgBaud OBJECT-TYPE
SYNTAX Integer32
( 300 | 600 | 1200 | 2400 | 4800 |
9600 | 19200 | 38400 | 57600 | 115200 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The baud rate of the Device Port."
::= { slcDevPortCfgEntry 16 }
slcDevPortCfgDataBits OBJECT-TYPE
SYNTAX Integer32 ( 7 | 8 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The data bits of the Device Port."
::= { slcDevPortCfgEntry 17 }
slcDevPortCfgStopBits OBJECT-TYPE
SYNTAX Integer32 ( 1 | 2 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The stop bits of the Device Port."
::= { slcDevPortCfgEntry 18 }
slcDevPortCfgParity OBJECT-TYPE
SYNTAX INTEGER { none(1), odd(2), even(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The parity of the Device Port."
::= { slcDevPortCfgEntry 19 }
slcDevPortCfgFlowControl OBJECT-TYPE
SYNTAX INTEGER { none(1), xonxoff(2), rtscts(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The flow control of the Device Port."
::= { slcDevPortCfgEntry 20 }
slcDevPortCfgLogins OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, authentication is required to access a serial
device connected to a Device Port."
::= { slcDevPortCfgEntry 21 }
slcDevPortCfgConnectDSR OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the Device Port only establishes a connection if
DSR (Data Set Ready) transitions to an asserted state."
::= { slcDevPortCfgEntry 22 }
slcDevPortCfgDisconnectDSR OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, and a connection to a Device Port is currently
in session, the connection will be terminated if DSR (Data
Set Ready) transitions to a de-asserted state."
::= { slcDevPortCfgEntry 23 }
slcDevPortCfgModemState OBJECT-TYPE
SYNTAX INTEGER { disabled(1),
dialout(2),
dialin(3),
dialback(4),
dialondemand(5),
dialinAndDialondemand(6),
dialinHostList(7),
cbcpServer(8),
cbcpClient(9) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For an external modem attached to the Device Port, indicates
how the modem will be used."
::= { slcDevPortCfgEntry 24 }
slcDevPortCfgModemMode OBJECT-TYPE
SYNTAX INTEGER { ppp(1), text(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For an external modem attached to the Device Port, the
mode: PPP (for Dial-in and Dial-out) and text (for Dial-in
and Dial-back)."
::= { slcDevPortCfgEntry 25 }
slcDevPortCfgLocalIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections, the local IP Address - all zeros if it
should be negotiated."
::= { slcDevPortCfgEntry 26 }
slcDevPortCfgRemoteIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections, the remote IP Address - all zeros if it
should be negotiated."
::= { slcDevPortCfgEntry 27 }
slcDevPortCfgAuth OBJECT-TYPE
SYNTAX INTEGER { pap(1), chap(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections, the type of authentication to be used."
::= { slcDevPortCfgEntry 28 }
slcDevPortCfgCHAPHost OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections with CHAP authentication, the host (for
Unix) or user (for Windows) to use."
::= { slcDevPortCfgEntry 29 }
slcDevPortCfgInitScript OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The initialization script for an external modem."
::= { slcDevPortCfgEntry 30 }
slcDevPortCfgTimeout OBJECT-TYPE
SYNTAX Integer32 (0..30)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout (in minutes) for text connections. A value
of 0 indicates that timeouts are disabled."
::= { slcDevPortCfgEntry 31 }
slcDevPortCfgDialoutNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The phone number to use for dial-out connections."
::= { slcDevPortCfgEntry 32 }
slcDevPortCfgDialoutLogin OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The login to use for dial-out connections."
::= { slcDevPortCfgEntry 33 }
slcDevPortCfgDialbackMode OBJECT-TYPE
SYNTAX INTEGER { usernumber(1), fixed(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For dial-back connections, defines the phone number to call:
a number associated with the authenticated user, or a fixed
number associated with the Device Port."
::= { slcDevPortCfgEntry 34 }
slcDevPortCfgDialbackNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The phone number to use for dial-back connections."
::= { slcDevPortCfgEntry 35 }
slcDevPortCfgNATState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, use NAT (Network Address Translation) to allow
dial-in and dial-back users to access the network connected
to Eth1 and Eth2."
::= { slcDevPortCfgEntry 36 }
slcDevPortCfgLocalState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, local logging is enabled for the Device Port."
::= { slcDevPortCfgEntry 37 }
slcDevPortCfgNFSFileState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, NFS File logging is enabled for the Device Port."
::= { slcDevPortCfgEntry 38 }
slcDevPortCfgNFSDir OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The local directory of a NFS mount to use for logging."
::= { slcDevPortCfgEntry 39 }
slcDevPortCfgNFSMaxFiles OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum number of files to use for NFS file logging."
::= { slcDevPortCfgEntry 40 }
slcDevPortCfgNFSMaxSize OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum size of each file (in bytes) for NFS File logging."
::= { slcDevPortCfgEntry 41 }
slcDevPortCfgEmailState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, Token and Data Detection (previously called
'Email Logging') is enabled for the Device Port."
::= { slcDevPortCfgEntry 42 }
slcDevPortCfgEmailTrigger OBJECT-TYPE
SYNTAX INTEGER { bytecnt(1), textstring(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of trigger to use for Token and Data Detection
(previously called 'Email Logging') - number of data bytes
received, or token/character string received."
::= { slcDevPortCfgEntry 43 }
slcDevPortCfgEmailByteThresh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When Token and Data Detection (previously called 'Email
Logging') is configured to trigger on a data byte count,
the number of bytes required to trigger an action."
::= { slcDevPortCfgEntry 44 }
slcDevPortCfgEmailDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For Token and Data Detection (previously called 'Email
Logging'), a time limit of how long the device port will
capture data after the data trigger is detected and before
closing the log file and performing the selected actions.
This setting is now called 'Action Delay'."
::= { slcDevPortCfgEntry 45 }
slcDevPortCfgEmailRestartDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For Token and Data Detection (previously called 'Email
Logging'), the period of time, after performing the
selected actions, during which the device port will ignore
additional characters received."
::= { slcDevPortCfgEntry 46 }
slcDevPortCfgEmailTextString OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When Token and Data Detection (previously called 'Email
Logging') is configured to trigger on a character string,
this defines the character string that will trigger an action."
::= { slcDevPortCfgEntry 47 }
slcDevPortCfgEmailTo OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For Token and Data Detection (previously called 'Email
Logging'), if the Email action is enabled, this object
defines the list of emails to send email notification to."
::= { slcDevPortCfgEntry 48 }
slcDevPortCfgEmailSubject OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For Token and Data Detection (previously called 'Email
Logging'), if the Email action is enabled, this object
defines the subject to include with email notification."
::= { slcDevPortCfgEntry 49 }
slcDevPortCfgPCCardState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, PC Card logging is enabled for the Device Port.
This value will be undefined if the SLC does not have PC Card
slots."
::= { slcDevPortCfgEntry 50 }
slcDevPortCfgPCCardLogTo OBJECT-TYPE
SYNTAX INTEGER { upperSlot(1), lowerSlot(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PC Card logging, which PC Card slot to use for logging.
This value will be undefined if the SLC does not have PC Card
slots."
::= { slcDevPortCfgEntry 51 }
slcDevPortCfgPCCardMaxFiles OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum number of files to use for PC Card logging.
This value will be undefined if the SLC does not have PC Card
slots."
::= { slcDevPortCfgEntry 52 }
slcDevPortCfgPCCardMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum size of each file (in bytes) for PC Card logging.
This value will be undefined if the SLC does not have PC Card
slots."
::= { slcDevPortCfgEntry 53 }
slcDevPortCfgAction OBJECT-TYPE
SYNTAX INTEGER { noAction(1),
zeroPortCounters(2),
clearLocalLog(3),
terminateConnections(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Performs an action on a Device Port. A read of this object
always returns the value noAction(1). Setting this object
to zeroPortCounters(2) will reset all port counters given in
slcDevPortStateTable. Setting this object to clearLocalLog(3)
will clear the local logging buffer. Setting this object to
terminateConnections(4) will terminate all connections
associated with the Device Port."
::= { slcDevPortCfgEntry 54 }
slcDevPortCfgEmailSend OBJECT-TYPE
SYNTAX INTEGER { email(1), snmptrap(2), both(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When a trigger is received, the type of notification to send:
email, SNMP trap, or email and SNMP trap. This object is
deprecated; instead refer to slcDevPortCfgTokenAction."
::= { slcDevPortCfgEntry 55 }
slcDevPortCfgBanner OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The banner displayed when the Device Port is connected to via
SSH or Telnet."
::= { slcDevPortCfgEntry 56 }
slcDevPortCfgIdleTimeout OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout (in seconds) for dial-in and dial-on-demand PPP
connections. If no traffic is received for the PPP connection
in the time defined by the idle timeout, the PPP connection
will be terminated. A value of 0 indicates that timeouts are
disabled."
::= { slcDevPortCfgEntry 57 }
slcDevPortCfgRestartDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The delay (in seconds) to wait before restarting dial-out or
dial-on-demand PPP connections."
::= { slcDevPortCfgEntry 58 }
slcDevPortCfgCallerIdLogging OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, caller id logging is enabled for a modem dial-in
connection."
::= { slcDevPortCfgEntry 59 }
slcDevPortCfgCallerIdATCmd OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modem AT command required to initiate caller id logging
by the modem."
::= { slcDevPortCfgEntry 60 }
slcDevPortCfgDODAuth OBJECT-TYPE
SYNTAX INTEGER { pap(1), chap(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections that are configured for both Dial-in and
Dial-on-Demand, the type of authentication to be used for
Dial-on-Demand."
::= { slcDevPortCfgEntry 61 }
slcDevPortCfgDODCHAPHost OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections that are configured for both Dial-in and
Dial-on-Demand, with CHAP authentication for Dial-on-Demand,
the host (for Unix) or user (for Windows) to use."
::= { slcDevPortCfgEntry 62 }
slcDevPortCfgSLMLoggingState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, SLM logging is enabled for the Device Port."
::= { slcDevPortCfgEntry 63 }
slcDevPortCfgSLMNMS OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP Addresses of up to three SNMP Network Management
Stations defined used for SLM Logging. Multiple IP Addresses
will be separated by a comma."
::= { slcDevPortCfgEntry 64 }
slcDevPortCfgSLMByteThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of bytes required to trigger SLM logging."
::= { slcDevPortCfgEntry 65 }
slcDevPortCfgSLMTimeFrame OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time frame for SLM logging, in seconds."
::= { slcDevPortCfgEntry 66 }
slcDevPortCfgWebColumns OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of columns in the Web SSH or Telnet window for
this Device Port."
::= { slcDevPortCfgEntry 67 }
slcDevPortCfgWebRows OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of rows in the Web SSH or Telnet window for
this Device Port."
::= { slcDevPortCfgEntry 68 }
slcDevPortCfgSyslogState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, Syslog logging is enabled for the Device Port."
::= { slcDevPortCfgEntry 69 }
slcDevPortCfgHostList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When slcDevPortCfgModemState is set to dialinHostList, the
name of the Host List used for Dial-in."
::= { slcDevPortCfgEntry 70 }
slcDevPortCfgDevLowTemp OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The low temperature limit, in Celsius, for the device
connected to this Device Port. If the temperature is not
applicable, 9999 will be returned."
::= { slcDevPortCfgEntry 71 }
slcDevPortCfgDevHighTemp OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The high temperature limit, in Celsius, for the device
connected to this Device Port. If the temperature is not
applicable, 9999 will be returned."
::= { slcDevPortCfgEntry 72 }
slcDevPortCfgDevTemperature OBJECT-TYPE
SYNTAX OCTET STRING
UNITS "Celsius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The actual temperature, in Celsius, for the device
connected to this Device Port. If the temperature is not
applicable, an empty string will be returned."
::= { slcDevPortCfgEntry 73 }
slcDevPortCfgDevLowHumidity OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The low humidty limit, in percentage, for the device
connected to this Device Port. If the temperature is not
applicable, 9999 will be returned."
::= { slcDevPortCfgEntry 74 }
slcDevPortCfgDevHighHumidity OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The high humidty limit, in percentage, for the device
connected to this Device Port. If the temperature is not
applicable, 9999 will be returned."
::= { slcDevPortCfgEntry 75 }
slcDevPortCfgDevHumidity OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The actual humidity, in percentage, for the device
connected to this Device Port. If the temperature is not
applicable, an empty string will be returned."
::= { slcDevPortCfgEntry 76 }
slcDevPortCfgDevTraps OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, traps will be sent when one of the limits for the
device connected to this Device Port are exceeded."
::= { slcDevPortCfgEntry 77 }
slcDevPortCfgShowLines OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, upon connecting to the Device Port, a series of
characters (or lines) output to the Device Port before it
was connected to are displayed."
::= { slcDevPortCfgEntry 78 }
slcDevPortCfgNumberShowLines OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If slcDevPortCfgShowLines is enabled, the number of lines that
are displayed upon connecting to the Device Port."
::= { slcDevPortCfgEntry 79 }
slcDevPortCfgViewPortLog OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, upon using 'connect direct' to a Device Port,
the slcDevPortCfgPortLogSeq key sequence can be typed to
view the end of the port log for the current Device Port,
or a different Device Port."
::= { slcDevPortCfgEntry 80 }
slcDevPortCfgPortLogSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character sequence to view the port log for the Device
Port."
::= { slcDevPortCfgEntry 81 }
slcDevPortCfgMaxDirectConnects OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum number of direct connects at the CLI for the
Device Port."
::= { slcDevPortCfgEntry 82 }
slcDevPortCfgTelnetTimeout OBJECT-TYPE
SYNTAX Integer32 (0..1800)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout (in seconds) for Telnet connections. A value
of 0 indicates that timeouts are disabled."
::= { slcDevPortCfgEntry 83 }
slcDevPortCfgSSHTimeout OBJECT-TYPE
SYNTAX Integer32 (0..1800)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout (in seconds) for SSH connections. A value
of 0 indicates that timeouts are disabled."
::= { slcDevPortCfgEntry 84 }
slcDevPortCfgTCPTimeout OBJECT-TYPE
SYNTAX Integer32 (0..1800)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout (in seconds) for TCP connections. A value
of 0 indicates that timeouts are disabled."
::= { slcDevPortCfgEntry 85 }
slcDevPortCfgCBCPClientType OBJECT-TYPE
SYNTAX INTEGER { adminDefined(1), userDefined(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When slcDevPortCfgModemState is set to cbcpClient, the
preferred type of dialback number to use for CBCP negotiation."
::= { slcDevPortCfgEntry 86 }
slcDevPortCfgCBCPServerAllowNoCallback OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled and slcDevPortCfgModemState is set to cbcpServer,
the SLC will allow the PPP peer to select the No Callback
option during CBCP negotiation."
::= { slcDevPortCfgEntry 87 }
slcDevPortCfgDialbackDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When slcDevPortCfgModemState is set to dialback or cbcpServer,
specifies the delay between the dial-in and dial-out portion
of the dialing sequence."
::= { slcDevPortCfgEntry 88 }
slcDevPortCfgUSBState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, USB logging is enabled for the Device Port. This
value will be undefined if the SLC does not have USB Ports."
::= { slcDevPortCfgEntry 89 }
slcDevPortCfgUSBLogTo OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For USB logging, which USB port to use for logging. This
value will be undefined if the SLC does not have USB Ports."
::= { slcDevPortCfgEntry 90 }
slcDevPortCfgUSBMaxFiles OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum number of files to use for USB logging. This
value will be undefined if the SLC does not have USB Ports."
::= { slcDevPortCfgEntry 91 }
slcDevPortCfgUSBMaxSize OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum size of each file (in bytes) for USB logging. This
value will be undefined if the SLC does not have USB Ports."
::= { slcDevPortCfgEntry 92 }
slcDevPortCfgCHAPAuthLocalUsers OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the local user list (login and password) is used
to validate the CHAP host and secret sent by a remote PPP
peer for CHAP authentication, instead of using the CHAP host
and secret associated with a modem."
::= { slcDevPortCfgEntry 93 }
slcDevPortCfgUseSites OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, sites (a set of site-oriented modem parameters
that can be activated by various modem-related events such
as authentication, outbound traffic for Dial-on-demand
connections, etc.) will be used instead of the parameters
configured for the modem."
::= { slcDevPortCfgEntry 94 }
slcDevPortCfgDialbackRetries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When slcDevPortCfgModemState is set to dialback or cbcpServer,
specifies the number of times the SLC will retry the dial-out
portion of the dialing sequence if the first attempt to
dial-out fails."
::= { slcDevPortCfgEntry 95 }
slcDevPortCfgGroup OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group or groups that may access the Device Port."
::= { slcDevPortCfgEntry 96 }
slcDevPortCfgIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The network mask associated with slcDevPortCfgIPMask."
::= { slcDevPortCfgEntry 97 }
slcDevPortCfgDevPrompt OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If the device port is connected to a SLP or ServerTech CDU,
specifies the prompt that is configured for the SLP or
ServerTech CDU. This object is deprecated, and has been
replaced by the RPM functionality."
::= { slcDevPortCfgEntry 98 }
slcDevPortCfgDevNumOutlets OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If the device port is connected to a ServerTech CDU, specifies
the number of outlets on the primary/master ServerTech unit.
This object is deprecated, and has been replaced by the RPM
functionality."
::= { slcDevPortCfgEntry 99 }
slcDevPortCfgDevNumExpOutlets OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If the device port is connected to a ServerTech CDU, specifies
the number of outlets on the expansion ServerTech unit. This
object is deprecated, and has been replaced by the RPM
functionality."
::= { slcDevPortCfgEntry 100 }
slcDevPortCfgReversePinout OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, swaps the positions of the serial lines, such
that the direction of data or the signal is reversed.
For instance, TX is swapped with RX. Enabling Reverse
Pinout facilitates connections to Cisco and Sun style RS-45
console ports using a straight through Ethernet patch cable,
without the need for a rolled cable or adapter. Note that
all Lantronix serial adapters are intended to be used with
Reverse Pinout disabled."
::= { slcDevPortCfgEntry 101 }
slcDevPortCfgUSBVBUS OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For SLC8000 USB Device Ports only. If enabled, the USB VBUS
signal provides power to the USB device attached to a device
port. Disabling VBUS will power down the device as long as it
is bus-powered instead of self-powered."
::= { slcDevPortCfgEntry 102 }
slcDevPortCfgAssertDTR OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RJ45 Device Ports only. By default, DTR is asserted on a
device port nearly all of the time (except momentarily when a
port is opened for operations). Unchecking this option will
deassert DTR, simulating a cable disconnection for the device
that is connected to a device port."
::= { slcDevPortCfgEntry 103 }
slcDevPortCfgPortType OBJECT-TYPE
SYNTAX INTEGER { rj45(1), usb(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the connector type on the device port: RJ45 or USB."
::= { slcDevPortCfgEntry 104 }
slcDevPortCfgTelnetTimeoutDataDirection OBJECT-TYPE
SYNTAX TimeoutDataDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If slcDevPortCfgTelnetTimeout is enabled, this setting
indicates the direction of data used to determine if the
connection has timed out."
::= { slcDevPortCfgEntry 105 }
slcDevPortCfgSSHTimeoutDataDirection OBJECT-TYPE
SYNTAX TimeoutDataDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If slcDevPortCfgSSHTimeout is enabled, this setting indicates
the direction of data used to determine if the connection has
timed out."
::= { slcDevPortCfgEntry 106 }
slcDevPortCfgTCPTimeoutDataDirection OBJECT-TYPE
SYNTAX TimeoutDataDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If slcDevPortCfgTCPTimeout is enabled, this setting indicates
the direction of data used to determine if the connection has
timed out."
::= { slcDevPortCfgEntry 107 }
slcDevPortCfgIdleTimeoutMessage OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, a message will be displayed to a user when their
connection to a device port will be terminated soon due to
the connection being idle."
::= { slcDevPortCfgEntry 108 }
slcDevPortCfgNumberOfSessionsMessage OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, a message will be displayed to a user when
connecting to a device port that indicates how many users
are currently connected to the device port."
::= { slcDevPortCfgEntry 109 }
slcDevPortCfgMinimizeLatency OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, device port latency will be minimized by
reducing read delays."
::= { slcDevPortCfgEntry 110 }
slcDevPortCfgTelnetSoftIAC OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the Telnet server will not block waiting for
the initial Telnet protocol IAC option responses."
::= { slcDevPortCfgEntry 111 }
slcDevPortCfgSendTermString OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, and a slcDevPortCfgTerminationString is defined,
when a network connection to a device port is terminated, the
termination string is sent to the device connected to the
device port. The string should be defined so that it sends
the the appropriate command(s) to the device to terminate any
active user sessions."
::= { slcDevPortCfgEntry 112 }
slcDevPortCfgTerminationString OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The termination string sent to the device connected to the
device port if slcDevPortCfgSendTermString is enabled."
::= { slcDevPortCfgEntry 113 }
slcDevPortCfgPowerManagementSeq OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The key sequence that displays the Power Management menu
when a user is connected to a device port."
::= { slcDevPortCfgEntry 114 }
slcDevPortCfgPowerSupplies OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A string that describes the managed power supplies configured
for the device port. A device port can have up to four power
supplies that provide power for the device connected to the
device port. The string is a comma separated list of power
supplies formatted: '<Power Suppy Name>(RPM Id/Outlet Id)'."
::= { slcDevPortCfgEntry 115 }
slcDevPortCfgToggleDTR OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Applies to RJ45 device ports only. If enabled, when a user
disconnects from a device port, DTR will be toggled. This
feature can be used when a serial connection requires DSR to
be active for the attached device to connect. In this case,
toggling DTR will end any active connection on the device."
::= { slcDevPortCfgEntry 116 }
slcDevPortCfgTokenAction OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For Token and Data Detection, a string containing one or more
actions that will be performed if a data trigger occurs:
syslog, email, trap, sendstring, powersupply."
::= { slcDevPortCfgEntry 117 }
slcDevPortCfgTokenSendString OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For Token and Data Detection (previously called 'Email
Logging'), if the Send String action is enabled, this object
defines the string to send to the device connected to the
device port."
::= { slcDevPortCfgEntry 118 }
slcDevPortCfgTokenPowerSupply OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For Token and Data Detection (previously called 'Email
Logging'), if the Control Power Supply action is enabled,
this object defines the name of the managed power supply to
perform an action on. This string can be 'all' for all
managed power supplies associated with the device port, or
an individual power supply name."
::= { slcDevPortCfgEntry 119 }
slcDevPortCfgTokenPowerAction OBJECT-TYPE
SYNTAX INTEGER { turnOff(1), turnOn(2), cyclePower(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For Token and Data Detection (previously called 'Email
Logging'), if the Control Power Supply action is enabled,
this object defines the action to take on
slcDevPortCfgTokenPowerSupply."
::= { slcDevPortCfgEntry 120 }
slcDevPortState OBJECT IDENTIFIER ::= { slcDevDevicePorts 3 }
slcDevPortStateNumber OBJECT-TYPE
SYNTAX Integer32 ( 8 | 16 | 24 | 32 | 40 | 48 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the Device Port State table."
::= { slcDevPortState 1 }
-- Device Port State table.
slcDevPortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcDevPortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of Device Port state entries. The number of
entries is given by the value of slcDevPortStateNumber."
::= { slcDevPortState 2 }
slcDevPortStateEntry OBJECT-TYPE
SYNTAX SlcDevPortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing all state information for a Device Port."
INDEX { slcDevPortStateIndex }
::= { slcDevPortStateTable 1 }
SlcDevPortStateEntry ::= SEQUENCE {
slcDevPortStateIndex Integer32,
slcDevPortStateBytesInput Integer32,
slcDevPortStateBytesOutput Integer32,
slcDevPortStateFramingErrors Integer32,
slcDevPortStateParityErrors Integer32,
slcDevPortStateOverrunErrors Integer32,
slcDevPortStateFlowControlViolations Integer32,
slcDevPortStateDSR EnabledState,
slcDevPortStateDTR EnabledState,
slcDevPortStateCTS EnabledState,
slcDevPortStateRTS EnabledState,
slcDevPortStateCD EnabledState
}
slcDevPortStateIndex OBJECT-TYPE
SYNTAX Integer32 (1..48)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference index for each Device Port State entry."
::= { slcDevPortStateEntry 1 }
slcDevPortStateBytesInput OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of bytes input to the Device Port since boot or
the last time Device Port statistics were zeroed."
::= { slcDevPortStateEntry 2 }
slcDevPortStateBytesOutput OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of bytes output from the Device Port since boot or
the last time Device Port statistics were zeroed."
::= { slcDevPortStateEntry 3 }
slcDevPortStateFramingErrors OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of framing errors for the Device Port since boot or
the last time Device Port statistics were zeroed."
::= { slcDevPortStateEntry 4 }
slcDevPortStateParityErrors OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of parity errors for the Device Port since boot or
the last time Device Port statistics were zeroed."
::= { slcDevPortStateEntry 5 }
slcDevPortStateOverrunErrors OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of overrun errors for the Device Port since boot or
the last time Device Port statistics were zeroed."
::= { slcDevPortStateEntry 6 }
slcDevPortStateFlowControlViolations OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of flow control violations for the Device Port
since boot or the last time Device Port statistics were
zeroed."
::= { slcDevPortStateEntry 7 }
slcDevPortStateDSR OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, Data Set Ready is enabled for the Device Port."
::= { slcDevPortStateEntry 8 }
slcDevPortStateDTR OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If enabled, Data Terminal Ready is enabled for the Device Port."
::= { slcDevPortStateEntry 9 }
slcDevPortStateCTS OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, Clear To Send is enabled for the Device Port."
::= { slcDevPortStateEntry 10 }
slcDevPortStateRTS OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, Request To Send is enabled for the Device Port."
::= { slcDevPortStateEntry 11 }
slcDevPortStateCD OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, Carrier Detect is enabled for the Device Port."
::= { slcDevPortStateEntry 12 }
slcDevPCCard OBJECT IDENTIFIER ::= { slcDevices 3 }
-- PC Card Configuration table.
slcPCCardCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcPCCardCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of PC Card configuration entries. There are two entries
in the table, index (1) for the upper PC Card slot, and index
(2) for the lower PC Card slot. This table will be empty if
the SLC does not have PC Card slots."
::= { slcDevPCCard 1 }
slcPCCardCfgEntry OBJECT-TYPE
SYNTAX SlcPCCardCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing all configuration settings for a PC Card Slot."
INDEX { slcPCCardCfgIndex }
::= { slcPCCardCfgTable 1 }
SlcPCCardCfgEntry ::= SEQUENCE {
slcPCCardCfgIndex Integer32,
slcPCCardCfgCardType INTEGER,
slcPCCardCfgCardId OCTET STRING,
-- Modem/ISDN: Data (serial) settings
slcPCCardCfgBaud Integer32,
slcPCCardCfgDataBits Integer32,
slcPCCardCfgStopBits Integer32,
slcPCCardCfgParity INTEGER,
slcPCCardCfgFlowControl INTEGER,
-- Modem/ISDN: Modem settings
slcPCCardCfgModemState INTEGER,
slcPCCardCfgModemMode INTEGER,
slcPCCardCfgLocalIP IpAddress,
slcPCCardCfgRemoteIP IpAddress,
slcPCCardCfgAuth INTEGER,
slcPCCardCfgCHAPHost OCTET STRING,
slcPCCardCfgInitScript OCTET STRING,
slcPCCardCfgTimeout Integer32,
slcPCCardCfgDialoutNum OCTET STRING,
slcPCCardCfgDialoutLogin OCTET STRING,
slcPCCardCfgDialbackMode INTEGER,
slcPCCardCfgDialbackNum OCTET STRING,
slcPCCardCfgNATState EnabledState,
-- Storage Card settings
slcPCCardCfgStorageFS INTEGER,
-- ISDN only settings
slcPCCardCfgISDNChannel Integer32,
slcPCCardCfgISDNChannelNum OCTET STRING,
-- IP settings
slcPCCardCfgTelnetState EnabledState,
slcPCCardCfgTelnetPort Integer32,
slcPCCardCfgTelnetAuth EnabledState,
slcPCCardCfgSSHState EnabledState,
slcPCCardCfgSSHPort Integer32,
slcPCCardCfgSSHAuth EnabledState,
slcPCCardCfgTCPState EnabledState,
slcPCCardCfgTCPPort Integer32,
slcPCCardCfgTCPAuth EnabledState,
-- GSM/GPRS only settings
slcPCCardCfgGSMPIN OCTET STRING,
slcPCCardCfgGSMNetworkName OCTET STRING, -- obsolete
slcPCCardCfgGSMPPPCompression EnabledState,
slcPCCardCfgGSMAutoAcquireDNS EnabledState,
slcPCCardCfgGSMDialoutMode INTEGER,
slcPCCardCfgGSMContextID OCTET STRING,
slcPCCardCfgGSMBearerService OCTET STRING,
-- Additional settings
slcPCCardCfgIdleTimeout Integer32,
slcPCCardCfgRestartDelay Integer32,
slcPCCardCfgCallerIdLogging EnabledState,
slcPCCardCfgCallerIdATCmd OCTET STRING,
slcPCCardCfgDODAuth INTEGER,
slcPCCardCfgDODCHAPHost OCTET STRING,
slcPCCardCfgHostList OCTET STRING,
slcPCCardCfgCBCPClientType INTEGER,
slcPCCardCfgCBCPServerAllowNoCallback EnabledState,
slcPCCardCfgDialbackDelay Integer32,
slcPCCardCfgCHAPAuthLocalUsers EnabledState,
slcPCCardCfgUseSites EnabledState,
slcPCCardCfgDialbackRetries Integer32,
slcPCCardCfgGroup OCTET STRING
}
slcPCCardCfgIndex OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference index for each PC Card Configuration entry."
::= { slcPCCardCfgEntry 1 }
slcPCCardCfgCardType OBJECT-TYPE
SYNTAX INTEGER { none(1),
storage(2),
modem(3),
isdn(4),
wireless(5),
gsmmodem(6) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of PC Card in the slot."
::= { slcPCCardCfgEntry 2 }
slcPCCardCfgCardId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The identifying string of the card in the slot."
::= { slcPCCardCfgEntry 3 }
slcPCCardCfgBaud OBJECT-TYPE
SYNTAX Integer32
( 300 | 600 | 1200 | 2400 | 4800 |
9600 | 19200 | 38400 | 57600 | 115200 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For ISDN and modem cards, the baud rate."
::= { slcPCCardCfgEntry 4 }
slcPCCardCfgDataBits OBJECT-TYPE
SYNTAX Integer32 ( 7 | 8 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For ISDN and modem cards, the data bits."
::= { slcPCCardCfgEntry 5 }
slcPCCardCfgStopBits OBJECT-TYPE
SYNTAX Integer32 ( 1 | 2 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For ISDN and modem cards, the stop bits."
::= { slcPCCardCfgEntry 6 }
slcPCCardCfgParity OBJECT-TYPE
SYNTAX INTEGER { none(1), odd(2), even(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For ISDN and modem cards, the parity."
::= { slcPCCardCfgEntry 7 }
slcPCCardCfgFlowControl OBJECT-TYPE
SYNTAX INTEGER { none(1), xonxoff(2), rtscts(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For ISDN and modem cards, the flow control."
::= { slcPCCardCfgEntry 8 }
slcPCCardCfgModemState OBJECT-TYPE
SYNTAX INTEGER { disabled(1),
dialout(2),
dialin(3),
dialback(4),
dialondemand(5),
dialinAndDialondemand(6),
dialinHostList(7),
cbcpServer(8),
cbcpClient(9) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For ISDN and modem cards, indicates how the modem will be used."
::= { slcPCCardCfgEntry 9 }
slcPCCardCfgModemMode OBJECT-TYPE
SYNTAX INTEGER { ppp(1), text(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For ISDN and modem cards, the mode: PPP (for Dial-in and
Dial-out) and text (for Dial-in and Dial-back)."
::= { slcPCCardCfgEntry 10 }
slcPCCardCfgLocalIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections, the local IP Address (all zeros if it
should be negotiated)."
::= { slcPCCardCfgEntry 11 }
slcPCCardCfgRemoteIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections, the remote IP Address (all zeros if it
should be negotiated)."
::= { slcPCCardCfgEntry 12 }
slcPCCardCfgAuth OBJECT-TYPE
SYNTAX INTEGER { pap(1), chap(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections, the type of authentication to be used."
::= { slcPCCardCfgEntry 13 }
slcPCCardCfgCHAPHost OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections with CHAP authentication, the host (for
Unix) or user (for Windows) to use."
::= { slcPCCardCfgEntry 14 }
slcPCCardCfgInitScript OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The initialization script for an external modem."
::= { slcPCCardCfgEntry 15 }
slcPCCardCfgTimeout OBJECT-TYPE
SYNTAX Integer32 (0..30)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout (in minutes) for text connections. A value
of 0 indicates that timeouts are disabled."
::= { slcPCCardCfgEntry 16 }
slcPCCardCfgDialoutNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The phone number to use for dial-out connections."
::= { slcPCCardCfgEntry 17 }
slcPCCardCfgDialoutLogin OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The login to use for dial-out connections."
::= { slcPCCardCfgEntry 18 }
slcPCCardCfgDialbackMode OBJECT-TYPE
SYNTAX INTEGER { usernumber(1), fixed(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For dial-back connections, defines the phone number to call:
a number associated with the authenticated user, or a fixed
number associated with the Device Port."
::= { slcPCCardCfgEntry 19 }
slcPCCardCfgDialbackNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The phone number to use for dial-back connections."
::= { slcPCCardCfgEntry 20 }
slcPCCardCfgNATState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, use NAT (Network Address Translation) to allow
dial-in and dial-back users to access the network connected
to Eth1 and Eth2."
::= { slcPCCardCfgEntry 21 }
slcPCCardCfgStorageFS OBJECT-TYPE
SYNTAX INTEGER { notmounted(1), ext2(2), fat(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For storage cards, the type of filesystem on the card."
::= { slcPCCardCfgEntry 22 }
slcPCCardCfgISDNChannel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The channel on the ISDN card to use, either 1 or 2."
::= { slcPCCardCfgEntry 23 }
slcPCCardCfgISDNChannelNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The phone number associated with the selected ISDN channel."
::= { slcPCCardCfgEntry 24 }
slcPCCardCfgTelnetState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, Telnet connections to the modem/ISDN PC Card
are allowed."
::= { slcPCCardCfgEntry 25 }
slcPCCardCfgTelnetPort OBJECT-TYPE
SYNTAX Integer32 (1025..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCP Port number for Telnet connections directly to the
modem/ISDN PC Card."
::= { slcPCCardCfgEntry 26 }
slcPCCardCfgTelnetAuth OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the user is required to authenticate to access
the modem/ISDN PC Card with Telnet."
::= { slcPCCardCfgEntry 27 }
slcPCCardCfgSSHState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, SSH connections to the modem/ISDN PC Card
are allowed."
::= { slcPCCardCfgEntry 28 }
slcPCCardCfgSSHPort OBJECT-TYPE
SYNTAX Integer32 (1025..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCP Port number for SSH connections directly to the
modem/ISDN PC Card."
::= { slcPCCardCfgEntry 29 }
slcPCCardCfgSSHAuth OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the user is required to authenticate to access
the modem/ISDN PC Card with SSH."
::= { slcPCCardCfgEntry 30 }
slcPCCardCfgTCPState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, TCP connections to the modem/ISDN PC Card
are allowed."
::= { slcPCCardCfgEntry 31 }
slcPCCardCfgTCPPort OBJECT-TYPE
SYNTAX Integer32 (1025..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCP Port number for TCP connections directly to the
modem/ISDN PC Card."
::= { slcPCCardCfgEntry 32 }
slcPCCardCfgTCPAuth OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the user is required to authenticate to access
the modem/ISDN PC Card with TCP."
::= { slcPCCardCfgEntry 33 }
slcPCCardCfgGSMPIN OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The PIN associated with the GSM/GPRS PC Card modem."
::= { slcPCCardCfgEntry 34 }
slcPCCardCfgGSMNetworkName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "The Network Name associated with the GSM/GPRS PC Card modem."
::= { slcPCCardCfgEntry 35 }
slcPCCardCfgGSMPPPCompression OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, PPP compression is enabled for GSM/GPRS PC Card
modem connections."
::= { slcPCCardCfgEntry 36 }
slcPCCardCfgGSMAutoAcquireDNS OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, DNS servers will be acquired vi GSM/GPRS PC Card
modem PPP connections."
::= { slcPCCardCfgEntry 37 }
slcPCCardCfgGSMDialoutMode OBJECT-TYPE
SYNTAX INTEGER { gprs(1), gsm(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mode to be used for GSM/GPRS PC Card modems configured
for dialout."
::= { slcPCCardCfgEntry 38 }
slcPCCardCfgGSMContextID OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Context Id string used for GSM/GPRS PC Card modems
configured for GPRS dialout mode."
::= { slcPCCardCfgEntry 39 }
slcPCCardCfgGSMBearerService OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Bearer Service Type string used for GSM/GPRS PC Card
modems configured for GSM dialin/dialout mode."
::= { slcPCCardCfgEntry 40 }
slcPCCardCfgIdleTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout (in seconds) for dial-in and dial-on-demand PPP
connections. If no traffic is received for the PPP connection
in the time defined by the idle timeout, the PPP connection
will be terminated. A value of 0 indicates that timeouts are
disabled."
::= { slcPCCardCfgEntry 41 }
slcPCCardCfgRestartDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The delay (in seconds) to wait before restarting dial-out or
dial-on-demand PPP connections."
::= { slcPCCardCfgEntry 42 }
slcPCCardCfgCallerIdLogging OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, caller id logging is enabled for a modem dial-in
connection."
::= { slcPCCardCfgEntry 43 }
slcPCCardCfgCallerIdATCmd OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modem AT command required to initiate caller id logging
by the modem."
::= { slcPCCardCfgEntry 44 }
slcPCCardCfgDODAuth OBJECT-TYPE
SYNTAX INTEGER { pap(1), chap(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections that are configured for both Dial-in and
Dial-on-Demand, the type of authentication to be used for
Dial-on-Demand."
::= { slcPCCardCfgEntry 45 }
slcPCCardCfgDODCHAPHost OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections that are configured for both Dial-in and
Dial-on-Demand, with CHAP authentication for Dial-on-Demand,
the host (for Unix) or user (for Windows) to use."
::= { slcPCCardCfgEntry 46 }
slcPCCardCfgHostList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When slcPCCardCfgModemState is set to dialinHostList, the
name of the Host List used for Dial-in."
::= { slcPCCardCfgEntry 47 }
slcPCCardCfgCBCPClientType OBJECT-TYPE
SYNTAX INTEGER { adminDefined(1), userDefined(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When slcPCCardCfgModemState is set to cbcpClient, the
preferred type of dialback number to use for CBCP negotiation."
::= { slcPCCardCfgEntry 48 }
slcPCCardCfgCBCPServerAllowNoCallback OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled and slcPCCardCfgModemState is set to cbcpServer,
the SLC will allow the PPP peer to select the No Callback
option during CBCP negotiation."
::= { slcPCCardCfgEntry 49 }
slcPCCardCfgDialbackDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When slcPCCardCfgModemState is set to dialback or cbcpServer,
specifies the delay between the dial-in and dial-out portion
of the dialing sequence."
::= { slcPCCardCfgEntry 50 }
slcPCCardCfgCHAPAuthLocalUsers OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the local user list (login and password) is used
to validate the CHAP host and secret sent by a remote PPP
peer for CHAP authentication, instead of using the CHAP host
and secret associated with a modem."
::= { slcPCCardCfgEntry 51 }
slcPCCardCfgUseSites OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, sites (a set of site-oriented modem parameters
that can be activated by various modem-related events such
as authentication, outbound traffic for Dial-on-demand
connections, etc.) will be used instead of the parameters
configured for the modem."
::= { slcPCCardCfgEntry 52 }
slcPCCardCfgDialbackRetries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When slcPCCardCfgModemState is set to dialback or cbcpServer,
specifies the number of times the SLC will retry the dial-out
portion of the dialing sequence if the first attempt to
dial-out fails."
::= { slcPCCardCfgEntry 53 }
slcPCCardCfgGroup OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group or groups that may access the PC Card slot."
::= { slcPCCardCfgEntry 54 }
slcDevPowerSupply OBJECT IDENTIFIER ::= { slcDevices 4 }
slcDevPowerSupplyType OBJECT-TYPE
SYNTAX INTEGER { acOnePowerSupply(1),
acTwoPowerSupplies(2),
dcTwoPowerSupplies(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of power supply for the SLC."
::= { slcDevPowerSupply 1 }
slcDevPowerSupplyA OBJECT-TYPE
SYNTAX INTEGER { up(1), down(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of Power Supply A."
::= { slcDevPowerSupply 2 }
slcDevPowerSupplyB OBJECT-TYPE
SYNTAX INTEGER { up(1), down(2), notInstalled(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of Power Supply B."
::= { slcDevPowerSupply 3 }
slcDevUSB OBJECT IDENTIFIER ::= { slcDevices 5 }
slcDevUSBState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the USB devices connected to the SLC will be
accessible. This value will be undefined if the SLC does
not have USB Ports."
::= { slcDevUSB 1 }
-- USB Configuration table.
slcDevUSBCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcDevUSBCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of USB configuration entries. There is one entry in the
table, index (1) for USB port 1. This table will be empty if
the SLC does not have USB Ports."
::= { slcDevUSB 2 }
slcDevUSBCfgEntry OBJECT-TYPE
SYNTAX SlcDevUSBCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing all configuration settings for a USB port."
INDEX { slcDevUSBId }
::= { slcDevUSBCfgTable 1 }
SlcDevUSBCfgEntry ::= SEQUENCE {
slcDevUSBId Integer32,
slcDevUSBCfgCardType INTEGER,
slcDevUSBCfgCardId OCTET STRING,
-- Storage Card settings
slcDevUSBCfgStorageFS INTEGER,
-- Modem: Data (serial) settings
slcDevUSBCfgBaud Integer32,
slcDevUSBCfgDataBits Integer32,
slcDevUSBCfgStopBits Integer32,
slcDevUSBCfgParity INTEGER,
slcDevUSBCfgFlowControl INTEGER,
-- Modem: Modem settings
slcDevUSBCfgModemState INTEGER,
slcDevUSBCfgModemMode INTEGER,
slcDevUSBCfgLocalIP IpAddress,
slcDevUSBCfgRemoteIP IpAddress,
slcDevUSBCfgAuth INTEGER,
slcDevUSBCfgCHAPHost OCTET STRING,
slcDevUSBCfgDODAuth INTEGER,
slcDevUSBCfgDODCHAPHost OCTET STRING,
slcDevUSBCfgInitScript OCTET STRING,
slcDevUSBCfgTimeout Integer32,
slcDevUSBCfgDialoutNum OCTET STRING,
slcDevUSBCfgDialoutLogin OCTET STRING,
slcDevUSBCfgDialbackMode INTEGER,
slcDevUSBCfgDialbackNum OCTET STRING,
slcDevUSBCfgDialbackDelay Integer32,
slcDevUSBCfgNATState EnabledState,
slcDevUSBCfgIdleTimeout Integer32,
slcDevUSBCfgRestartDelay Integer32,
slcDevUSBCfgCallerIdLogging EnabledState,
slcDevUSBCfgCallerIdATCmd OCTET STRING,
slcDevUSBCfgHostList OCTET STRING,
slcDevUSBCfgCBCPClientType INTEGER,
slcDevUSBCfgCBCPServerAllowNoCallback EnabledState,
-- IP settings
slcDevUSBCfgTelnetState EnabledState,
slcDevUSBCfgTelnetPort Integer32,
slcDevUSBCfgTelnetAuth EnabledState,
slcDevUSBCfgSSHState EnabledState,
slcDevUSBCfgSSHPort Integer32,
slcDevUSBCfgSSHAuth EnabledState,
slcDevUSBCfgTCPState EnabledState,
slcDevUSBCfgTCPPort Integer32,
slcDevUSBCfgTCPAuth EnabledState,
-- GSM/GPRS only settings
slcDevUSBCfgGSMPIN OCTET STRING,
slcDevUSBCfgGSMPPPCompression EnabledState,
slcDevUSBCfgGSMAutoAcquireDNS EnabledState,
slcDevUSBCfgGSMDialoutMode INTEGER,
slcDevUSBCfgGSMContextID OCTET STRING,
slcDevUSBCfgGSMBearerService OCTET STRING,
-- Additional settings
slcDevUSBCfgCHAPAuthLocalUsers EnabledState,
slcDevUSBCfgUseSites EnabledState,
slcDevUSBCfgDialbackRetries Integer32,
slcDevUSBCfgDialtoneCheck Integer32,
slcDevUSBCfgGroup OCTET STRING
}
slcDevUSBId OBJECT-TYPE
SYNTAX Integer32 (1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The identifier for a USB Port (1 indicates USB Port U1)."
::= { slcDevUSBCfgEntry 1 }
slcDevUSBCfgCardType OBJECT-TYPE
SYNTAX INTEGER { none(1),
storage(2),
modem(3),
isdn(4),
wireless(5),
gsmmodem(6) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of USB device in the port."
::= { slcDevUSBCfgEntry 2 }
slcDevUSBCfgCardId OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The identifying string of the device in the port."
::= { slcDevUSBCfgEntry 3 }
slcDevUSBCfgStorageFS OBJECT-TYPE
SYNTAX INTEGER { notmounted(1), ext2(2), fat(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For thumb drives, the type of filesystem on the card."
::= { slcDevUSBCfgEntry 4 }
slcDevUSBCfgBaud OBJECT-TYPE
SYNTAX Integer32
( 300 | 600 | 1200 | 2400 | 4800 |
9600 | 19200 | 38400 | 57600 | 115200 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For modem cards, the baud rate."
::= { slcDevUSBCfgEntry 5 }
slcDevUSBCfgDataBits OBJECT-TYPE
SYNTAX Integer32 ( 7 | 8 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For modem cards, the data bits."
::= { slcDevUSBCfgEntry 6 }
slcDevUSBCfgStopBits OBJECT-TYPE
SYNTAX Integer32 ( 1 | 2 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For modem cards, the stop bits."
::= { slcDevUSBCfgEntry 7 }
slcDevUSBCfgParity OBJECT-TYPE
SYNTAX INTEGER { none(1), odd(2), even(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For modem cards, the parity."
::= { slcDevUSBCfgEntry 8 }
slcDevUSBCfgFlowControl OBJECT-TYPE
SYNTAX INTEGER { none(1), xonxoff(2), rtscts(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For modem cards, the flow control."
::= { slcDevUSBCfgEntry 9 }
slcDevUSBCfgModemState OBJECT-TYPE
SYNTAX INTEGER { disabled(1),
dialout(2),
dialin(3),
dialback(4),
dialondemand(5),
dialinAndDialondemand(6),
dialinHostList(7),
cbcpServer(8),
cbcpClient(9) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For modem cards, indicates how the modem will be used."
::= { slcDevUSBCfgEntry 10 }
slcDevUSBCfgModemMode OBJECT-TYPE
SYNTAX INTEGER { ppp(1), text(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For modem cards, the mode: PPP (for Dial-in and
Dial-out) and text (for Dial-in and Dial-back)."
::= { slcDevUSBCfgEntry 11 }
slcDevUSBCfgLocalIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections, the local IP Address (all zeros if it
should be negotiated)."
::= { slcDevUSBCfgEntry 12 }
slcDevUSBCfgRemoteIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections, the remote IP Address (all zeros if it
should be negotiated)."
::= { slcDevUSBCfgEntry 13 }
slcDevUSBCfgAuth OBJECT-TYPE
SYNTAX INTEGER { pap(1), chap(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections, the type of authentication to be used."
::= { slcDevUSBCfgEntry 14 }
slcDevUSBCfgCHAPHost OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections with CHAP authentication, the host (for
Unix) or user (for Windows) to use."
::= { slcDevUSBCfgEntry 15 }
slcDevUSBCfgDODAuth OBJECT-TYPE
SYNTAX INTEGER { pap(1), chap(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections that are configured for both Dial-in and
Dial-on-Demand, the type of authentication to be used for
Dial-on-Demand."
::= { slcDevUSBCfgEntry 16 }
slcDevUSBCfgDODCHAPHost OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections that are configured for both Dial-in and
Dial-on-Demand, with CHAP authentication for Dial-on-Demand,
the host (for Unix) or user (for Windows) to use."
::= { slcDevUSBCfgEntry 17 }
slcDevUSBCfgInitScript OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The initialization script for a modem."
::= { slcDevUSBCfgEntry 18 }
slcDevUSBCfgTimeout OBJECT-TYPE
SYNTAX Integer32 (0..30)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout (in minutes) for text connections. A value
of 0 indicates that timeouts are disabled."
::= { slcDevUSBCfgEntry 19 }
slcDevUSBCfgDialoutNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The phone number to use for dial-out connections."
::= { slcDevUSBCfgEntry 20 }
slcDevUSBCfgDialoutLogin OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The login to use for dial-out connections."
::= { slcDevUSBCfgEntry 21 }
slcDevUSBCfgDialbackMode OBJECT-TYPE
SYNTAX INTEGER { usernumber(1), fixed(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For dial-back connections, defines the phone number to call:
a number associated with the authenticated user, or a fixed
number associated with the Device Port."
::= { slcDevUSBCfgEntry 22 }
slcDevUSBCfgDialbackNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The phone number to use for dial-back connections."
::= { slcDevUSBCfgEntry 23 }
slcDevUSBCfgDialbackDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When slcDevUSBCfgModemState is set to dialback or cbcpServer,
specifies the delay between the dial-in and dial-out portion
of the dialing sequence."
::= { slcDevUSBCfgEntry 24 }
slcDevUSBCfgNATState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, use NAT (Network Address Translation) to allow
dial-in and dial-back users to access the network connected
to Eth1 and Eth2."
::= { slcDevUSBCfgEntry 25 }
slcDevUSBCfgIdleTimeout OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout (in seconds) for dial-in and dial-on-demand PPP
connections. If no traffic is received for the PPP connection
in the time defined by the idle timeout, the PPP connection
will be terminated. A value of 0 indicates that timeouts are
disabled."
::= { slcDevUSBCfgEntry 26 }
slcDevUSBCfgRestartDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The delay (in seconds) to wait before restarting dial-out or
dial-on-demand PPP connections."
::= { slcDevUSBCfgEntry 27 }
slcDevUSBCfgCallerIdLogging OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, caller id logging is enabled for a modem dial-in
connection."
::= { slcDevUSBCfgEntry 28 }
slcDevUSBCfgCallerIdATCmd OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modem AT command required to initiate caller id logging
by the modem."
::= { slcDevUSBCfgEntry 29 }
slcDevUSBCfgHostList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When slcDevUSBCfgModemState is set to dialinHostList, the
name of the Host List used for Dial-in."
::= { slcDevUSBCfgEntry 30 }
slcDevUSBCfgCBCPClientType OBJECT-TYPE
SYNTAX INTEGER { adminDefined(1), userDefined(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When slcDevUSBCfgModemState is set to cbcpClient, the
preferred type of dialback number to use for CBCP negotiation."
::= { slcDevUSBCfgEntry 31 }
slcDevUSBCfgCBCPServerAllowNoCallback OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled and slcDevUSBCfgModemState is set to cbcpServer,
the SLC will allow the PPP peer to select the No Callback
option during CBCP negotiation."
::= { slcDevUSBCfgEntry 32 }
slcDevUSBCfgTelnetState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, Telnet connections to the USB modem are allowed."
::= { slcDevUSBCfgEntry 33 }
slcDevUSBCfgTelnetPort OBJECT-TYPE
SYNTAX Integer32 (1025..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCP Port number for Telnet connections directly to the
USB modem."
::= { slcDevUSBCfgEntry 34 }
slcDevUSBCfgTelnetAuth OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the user is required to authenticate to access
the USB modem with Telnet."
::= { slcDevUSBCfgEntry 35 }
slcDevUSBCfgSSHState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, SSH connections to the USB modem are allowed."
::= { slcDevUSBCfgEntry 36 }
slcDevUSBCfgSSHPort OBJECT-TYPE
SYNTAX Integer32 (1025..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCP Port number for SSH connections directly to the USB modem."
::= { slcDevUSBCfgEntry 37 }
slcDevUSBCfgSSHAuth OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the user is required to authenticate to access
the USB modem with SSH."
::= { slcDevUSBCfgEntry 38 }
slcDevUSBCfgTCPState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, TCP connections to the USB modem are allowed."
::= { slcDevUSBCfgEntry 39 }
slcDevUSBCfgTCPPort OBJECT-TYPE
SYNTAX Integer32 (1025..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCP Port number for TCP connections directly to the USB modem."
::= { slcDevUSBCfgEntry 40 }
slcDevUSBCfgTCPAuth OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the user is required to authenticate to access
the USB modem with TCP."
::= { slcDevUSBCfgEntry 41 }
slcDevUSBCfgGSMPIN OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The PIN associated with the GSM/GPRS modem."
::= { slcDevUSBCfgEntry 42 }
slcDevUSBCfgGSMPPPCompression OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, PPP compression is enabled GSM/GPRS modem
connections."
::= { slcDevUSBCfgEntry 43 }
slcDevUSBCfgGSMAutoAcquireDNS OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, DNS servers will be acquired vi GSM/GPRS modem
PPP connections."
::= { slcDevUSBCfgEntry 44 }
slcDevUSBCfgGSMDialoutMode OBJECT-TYPE
SYNTAX INTEGER { gprs(1), gsm(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mode to be used for GSM/GPRS modems configured for
dialout."
::= { slcDevUSBCfgEntry 45 }
slcDevUSBCfgGSMContextID OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Context Id string used for GSM/GPRS modems configured
for GPRS dialout mode."
::= { slcDevUSBCfgEntry 46 }
slcDevUSBCfgGSMBearerService OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Bearer Service Type string used for GSM/GPRS modems
configured for GSM dialin/dialout mode."
::= { slcDevUSBCfgEntry 47 }
slcDevUSBCfgCHAPAuthLocalUsers OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the local user list (login and password) is used
to validate the CHAP host and secret sent by a remote PPP
peer for CHAP authentication, instead of using the CHAP host
and secret associated with a modem."
::= { slcDevUSBCfgEntry 48 }
slcDevUSBCfgUseSites OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, sites (a set of site-oriented modem parameters
that can be activated by various modem-related events such
as authentication, outbound traffic for Dial-on-demand
connections, etc.) will be used instead of the parameters
configured for the modem."
::= { slcDevUSBCfgEntry 49 }
slcDevUSBCfgDialbackRetries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When slcDevUSBCfgModemState is set to dialback or cbcpServer,
specifies the number of times the SLC will retry the dial-out
portion of the dialing sequence if the first attempt to
dial-out fails."
::= { slcDevUSBCfgEntry 50 }
slcDevUSBCfgDialtoneCheck OBJECT-TYPE
SYNTAX Integer32 (0..600)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time (in minutes) between checks for a modem dialtone.
A value of 0 indicates that dialtone checks are disabled."
::= { slcDevUSBCfgEntry 51 }
slcDevUSBCfgGroup OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group or groups that may access the USB port."
::= { slcDevUSBCfgEntry 52 }
slcDevIntModem OBJECT IDENTIFIER ::= { slcDevices 6 }
slcDevIntModemModemState OBJECT-TYPE
SYNTAX INTEGER { disabled(1),
dialout(2),
dialin(3),
dialback(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For the SLC internal modem, indicates how the modem will
be used."
::= { slcDevIntModem 1 }
slcDevIntModemModemMode OBJECT-TYPE
SYNTAX INTEGER { ppp(1), text(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For the SLC internal modem, the mode: PPP (for Dial-in and
Dial-out) and text (for Dial-in and Dial-back)."
::= { slcDevIntModem 2 }
slcDevIntModemLocalIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections, the local IP Address - all zeros if it
should be negotiated."
::= { slcDevIntModem 3 }
slcDevIntModemRemoteIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections, the remote IP Address - all zeros if it
should be negotiated."
::= { slcDevIntModem 4 }
slcDevIntModemAuth OBJECT-TYPE
SYNTAX INTEGER { pap(1), chap(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections, the type of authentication to be used."
::= { slcDevIntModem 5 }
slcDevIntModemCHAPHost OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For PPP connections with CHAP authentication, the host (for
Unix) or user (for Windows) to use."
::= { slcDevIntModem 6 }
slcDevIntModemInitScript OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The initialization script for an internal modem."
::= { slcDevIntModem 7 }
slcDevIntModemTimeout OBJECT-TYPE
SYNTAX Integer32 (0..30)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout (in minutes) for text connections. A value
of 0 indicates that timeouts are disabled."
::= { slcDevIntModem 8 }
slcDevIntModemDialoutNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The phone number to use for dial-out connections."
::= { slcDevIntModem 9 }
slcDevIntModemDialoutLogin OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The login to use for dial-out connections."
::= { slcDevIntModem 10 }
slcDevIntModemDialbackMode OBJECT-TYPE
SYNTAX INTEGER { usernumber(1), fixed(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For dial-back connections, defines the phone number to call:
a number associated with the authenticated user, or a fixed
number associated with the internal modem."
::= { slcDevIntModem 11 }
slcDevIntModemDialbackNum OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The phone number to use for dial-back connections."
::= { slcDevIntModem 12 }
slcDevIntModemDialbackRetries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When slcDevIntModemModemState is set to dialback,
specifies the number of times the SLC will retry the dial-out
portion of the dialing sequence if the first attempt to
dial-out fails."
::= { slcDevIntModem 13 }
slcDevIntModemDialbackDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When slcDevIntModemModemState is set to dialback,
specifies the delay between the dial-in and dial-out portion
of the dialing sequence."
::= { slcDevIntModem 14 }
slcDevIntModemCallerIdLogging OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, caller id logging is enabled for a modem dial-in
connection."
::= { slcDevIntModem 15 }
slcDevIntModemCallerIdATCmd OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The modem AT command required to initiate caller id logging
by the modem."
::= { slcDevIntModem 16 }
slcDevIntModemUseSites OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, sites (a set of site-oriented modem parameters
that can be activated by various modem-related events such
as authentication, outbound traffic for Dial-on-demand
connections, etc.) will be used instead of the parameters
configured for the modem."
::= { slcDevIntModem 17 }
slcDevIntModemGroup OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group or groups that may access the internal modem
connection."
::= { slcDevIntModem 18 }
slcDevIntModemIdleTimeout OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout (in seconds) for dial-in and dial-on-demand PPP
connections. If no traffic is received for the PPP connection
in the time defined by the idle timeout, the PPP connection
will be terminated. A value of 0 indicates that timeouts are
disabled."
::= { slcDevIntModem 19 }
slcDevIntModemRestartDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The delay (in seconds) to wait before restarting dial-out or
dial-on-demand PPP connections."
::= { slcDevIntModem 20 }
slcDevIntModemNATState OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, use NAT (Network Address Translation) to allow
dial-in and dial-back users to access the network connected
to Eth1 and Eth2."
::= { slcDevIntModem 21 }
slcDevIntModemDialtoneCheck OBJECT-TYPE
SYNTAX Integer32 (0..600)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time (in minutes) between checks for a modem dialtone.
A value of 0 indicates that dialtone checks are disabled."
::= { slcDevIntModem 22 }
slcDevRPM OBJECT IDENTIFIER ::= { slcDevices 7 }
-- RPM table.
slcDevRPMCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcDevRPMCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of RPM configuration entries."
::= { slcDevRPM 1 }
slcDevRPMCfgEntry OBJECT-TYPE
SYNTAX SlcDevRPMCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing all configuration settings for an RPM,
as well as some top level status information for the RPM."
INDEX { slcDevRPMId }
::= { slcDevRPMCfgTable 1 }
SlcDevRPMCfgEntry ::= SEQUENCE {
slcDevRPMId Integer32,
slcDevRPMName OCTET STRING,
slcDevRPMVendorModel OCTET STRING,
slcDevRPMManagedVia INTEGER,
slcDevRPMIPAddress IpAddress,
slcDevRPMPort Integer32,
slcDevRPMDriverOpts OCTET STRING,
slcDevRPMStatus OCTET STRING,
slcDevRPMFirmwareVersion OCTET STRING,
slcDevRPMSerialNumber OCTET STRING,
slcDevRPMMACAddress OCTET STRING,
slcDevRPMNumOutlets Integer32,
slcDevRPMOutletsOn Integer32,
slcDevRPMSNMPReadComm OCTET STRING,
slcDevRPMAdminLogin OCTET STRING,
slcDevRPMLogStatus Integer32,
slcDevRPMCriticalSNMPTraps EnabledState,
slcDevRPMCriticalEmails OCTET STRING,
slcDevRPMProvidesSLCPower EnabledState,
slcDevRPMOnLowBattery INTEGER,
slcDevRPMShutdownOrder Integer32,
slcDevRPMLoad Integer32,
slcDevRPMLoadOverThreshold Integer32,
slcDevRPMBatteryCharge Integer32,
slcDevRPMBatteryRuntime TimeTicks,
slcDevRPMBeeperStatus EnabledState,
slcDevRPMTemperature Integer32,
slcDevRPMUptime TimeTicks
}
slcDevRPMId OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The unique identifier for an RPM device."
::= { slcDevRPMCfgEntry 1 }
slcDevRPMName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the RPM."
::= { slcDevRPMCfgEntry 2 }
slcDevRPMVendorModel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The manufacture and model of the RPM."
::= { slcDevRPMCfgEntry 3 }
slcDevRPMManagedVia OBJECT-TYPE
SYNTAX INTEGER { serial(1), network(2), snmp(3), usb(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The method of control for managing the RPM."
::= { slcDevRPMCfgEntry 4 }
slcDevRPMIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For SNMP and network managed RPMs, the IP Address of the RPM."
::= { slcDevRPMCfgEntry 5 }
slcDevRPMPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For network managed RPMs, the TCP port to use to connect to
the RPM. For USB managed RPMs, the USB port the device is
connected to (0 indicates a port on the front of the SLC).
For serially managed RPMs, the RJ45 device port the device is
connected to."
::= { slcDevRPMCfgEntry 6 }
slcDevRPMDriverOpts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Any driver options that are configured for the RPM. This
option is mostly used for the USB vendor and product id."
::= { slcDevRPMCfgEntry 7 }
slcDevRPMStatus OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current status for the RPM; for example, 'OL' to
indicate 'Online' for a UPS. This object may be blank if
the device does not report a status, or if the device is
not in an error state."
::= { slcDevRPMCfgEntry 8 }
slcDevRPMFirmwareVersion OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current firmware version of the RPM. This object may be
blank if the device does not report its firmware version."
::= { slcDevRPMCfgEntry 9 }
slcDevRPMSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The serial number of the RPM. This object may be blank if
the device does not report its serial number."
::= { slcDevRPMCfgEntry 10 }
slcDevRPMMACAddress OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hardware address of the ethernet port of the RPM.
This object may be blank if the device does not report
its MAC address."
::= { slcDevRPMCfgEntry 11 }
slcDevRPMNumOutlets OBJECT-TYPE
SYNTAX Integer32 (0..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of power outlets that the RPM has."
::= { slcDevRPMCfgEntry 12 }
slcDevRPMOutletsOn OBJECT-TYPE
SYNTAX Integer32 (-1..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of RPM outlets that are currently turned on.
A negative value indicates that the RPM does not report
how many outlets are turned on."
::= { slcDevRPMCfgEntry 13 }
slcDevRPMSNMPReadComm OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For SNMP managed RPMs, the SNMP read (get) community."
::= { slcDevRPMCfgEntry 14 }
slcDevRPMAdminLogin OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For serial or network managed RPMs, the administrator login."
::= { slcDevRPMCfgEntry 15 }
slcDevRPMLogStatus OBJECT-TYPE
SYNTAX Integer32 (0..60)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates how frequently the status for the RPM is logged.
A value of 0 indicates that logging is disabled."
::= { slcDevRPMCfgEntry 16 }
slcDevRPMCriticalSNMPTraps OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, indicates that the slcEventRPMAction trap will
be sent for critical events for the RPM."
::= { slcDevRPMCfgEntry 17 }
slcDevRPMCriticalEmails OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An email address to send emails to for critical events for
the RPM."
::= { slcDevRPMCfgEntry 18 }
slcDevRPMProvidesSLCPower OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, indicates that the RPM provides power to the SLC."
::= { slcDevRPMCfgEntry 19 }
slcDevRPMOnLowBattery OBJECT-TYPE
SYNTAX INTEGER { shutdownThisUPS(1),
shutdownAllUPS(2),
allowBatteryToFail(3),
shutdownSLCUPS(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the action taken when a UPS is on battery and
reaches a 'low battery' state. Applies to UPS devices only."
::= { slcDevRPMCfgEntry 20 }
slcDevRPMShutdownOrder OBJECT-TYPE
SYNTAX Integer32 (0..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If a UPS reaches a 'low battery' state and its
slcDevRPMOnLowBattery setting is shutdownAllUPS, this
indicates the order in which this RPM will be shutdown as
all UPSes are shutdown. All UPSes with a shutdown order of
'1' will be shutdown first, followed by all UPSes with a
shutdown order of '2', etc. Shutdown orders are in the range
of 1 to 49, with 50 being reserved for UPSes that provide
power to the SLC - they will always be shutdown last.
A value of 0 indicates that this UPS will not be shutdown.
Applies to UPS devices only."
::= { slcDevRPMCfgEntry 21 }
slcDevRPMLoad OBJECT-TYPE
SYNTAX Integer32 (-1..1000)
UNITS "tenths of a percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current load of the RPM expressed as a percentage.
The value is in tenths of a percent. A negative value
indicates that the RPM does not report load values."
::= { slcDevRPMCfgEntry 22 }
slcDevRPMLoadOverThreshold OBJECT-TYPE
SYNTAX Integer32 (-1..1000)
UNITS "tenths of a percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The load when the RPM switches to an overload condition,
expressed as a percentage. The value is in tenths of a
percent. A negative value indicates that the RPM does not
report over load threshold values."
::= { slcDevRPMCfgEntry 23 }
slcDevRPMBatteryCharge OBJECT-TYPE
SYNTAX Integer32 (-1..1000)
UNITS "tenths of a percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current battery charge for the the RPM, expressed as
a percentage. The value is in tenths of a percent. A
negative value indicates that the RPM does not report
battery charge values."
::= { slcDevRPMCfgEntry 24 }
slcDevRPMBatteryRuntime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "hundredths of seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of seconds in the RPM remaining battery life.
A value of 0 indicates that the RPM does not report battery
runtime values."
::= { slcDevRPMCfgEntry 25 }
slcDevRPMBeeperStatus OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, indicates that the RPM beeper is enabled.
A value of 0 indicates that the RPM does not report beeper
status."
::= { slcDevRPMCfgEntry 26 }
slcDevRPMTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The internal temperature of the RPM, given in Celsius.
A value of less than or equal to zero indicates that the
RPM does not report temperature values."
::= { slcDevRPMCfgEntry 27 }
slcDevRPMUptime OBJECT-TYPE
SYNTAX TimeTicks
UNITS "hundredths of seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of seconds the RPM has been up. A value of 0
indicates that the RPM does not report uptime values."
::= { slcDevRPMCfgEntry 28 }
slcDevRPMStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcDevRPMStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of RPM status entries."
::= { slcDevRPM 2 }
slcDevRPMStatusEntry OBJECT-TYPE
SYNTAX SlcDevRPMStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing status information for an RPM. The SLC
supports up to two towers or units per RPM."
INDEX { slcDevRPMId, RPMTowerIndex }
::= { slcDevRPMStatusTable 1 }
SlcDevRPMStatusEntry ::= SEQUENCE {
slcDevRPMCurrent Integer32,
slcDevRPMInputVoltage Integer32,
slcDevRPMApparentPower Integer32,
slcDevRPMNominalApparentPower Integer32,
slcDevRPMRealPower Integer32,
slcDevRPMNominalRealPower Integer32
}
slcDevRPMCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS "tenths of Amps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total current level, in tenths of Amps, for all outlets,
on a given RPM tower or unit. If the value is negative, the
RPM does not report current for the tower or unit."
::= { slcDevRPMStatusEntry 1 }
slcDevRPMInputVoltage OBJECT-TYPE
SYNTAX Integer32
UNITS "tenths of Volts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The input voltage, in tenths of Volts, on a given RPM tower
or unit. If the value is negative, the RPM does not report
input voltage for the tower or unit."
::= { slcDevRPMStatusEntry 2 }
slcDevRPMApparentPower OBJECT-TYPE
SYNTAX Integer32
UNITS "tenths of Volt-Amps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The apparent power, in tenths of Volt-Amps, on a given RPM
tower or unit. If the value is negative, the RPM does not
report apparent power for the tower or unit."
::= { slcDevRPMStatusEntry 3 }
slcDevRPMNominalApparentPower OBJECT-TYPE
SYNTAX Integer32
UNITS "tenths of Volt-Amps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The nominal apparent power, in tenths of Volt-Amps, on a
given RPM tower or unit. If the value is negative, the RPM
does not report nominal apparent power for the tower or unit."
::= { slcDevRPMStatusEntry 4 }
slcDevRPMRealPower OBJECT-TYPE
SYNTAX Integer32
UNITS "tenths of Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The real power, in tenths of Watts, on a given RPM tower or
unit. If the value is negative, the RPM does not report
real power for the tower or unit."
::= { slcDevRPMStatusEntry 5 }
slcDevRPMNominalRealPower OBJECT-TYPE
SYNTAX Integer32
UNITS "tenths of Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The nominal real power, in tenths of Watts, on a given RPM
tower or unit. If the value is negative, the RPM does not
report nominal real power for the tower or unit."
::= { slcDevRPMStatusEntry 6 }
slcDevRPMOutletTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcDevRPMOutletEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of RPM outlet status and control entries."
::= { slcDevRPM 3 }
slcDevRPMOutletEntry OBJECT-TYPE
SYNTAX SlcDevRPMOutletEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing status and control for outlets on an RPM."
INDEX { slcDevRPMId, RPMOutletIndex }
::= { slcDevRPMOutletTable 1 }
SlcDevRPMOutletEntry ::= SEQUENCE {
slcDevRPMOutletName OCTET STRING,
slcDevRPMOutletState INTEGER,
slcDevRPMOutletCurrent Integer32,
slcDevRPMOutletAction INTEGER
}
slcDevRPMOutletName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current name of the RPM outlet. This will be blank if
the RPM device does not report outlet names."
::= { slcDevRPMOutletEntry 1 }
slcDevRPMOutletState OBJECT-TYPE
SYNTAX INTEGER { unknown(1), off(2), on(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current state of the RPM outlet."
::= { slcDevRPMOutletEntry 2 }
slcDevRPMOutletCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS "tenths of Amps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current level, in tenths of Amps, for the RPM outlet.
This will be negative if the RPM does not report current
values for the outlet."
::= { slcDevRPMOutletEntry 3 }
slcDevRPMOutletAction OBJECT-TYPE
SYNTAX INTEGER { noAction(1), turnOff(2), turnOn(3), cyclePower(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Performs an action to change the state of an outlet on an
RPM. A read of this object always returns the value
noAction(1). If the RPM supports individual outlet control,
a command will be sent to the RPM to change the outlet state.
Requests for invalid outlets or RPMs that do not support
individual outlet control will return an error."
::= { slcDevRPMOutletEntry 4 }
--
-- Connections Group
--
slcConnNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the Connections table."
::= { slcConnections 1 }
-- SLC Connections table
slcConnTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlcConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of connection entries. The number of entries is given
by the value of slcConnNumber."
::= { slcConnections 2 }
slcConnEntry OBJECT-TYPE
SYNTAX SlcConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing a connection."
INDEX { slcConnIndex }
::= { slcConnTable 1 }
SlcConnEntry ::= SEQUENCE {
slcConnIndex Integer32,
slcConnEndPt1 OCTET STRING,
slcConnEndPt2 OCTET STRING,
slcConnFlow INTEGER,
slcConnUser OCTET STRING,
slcConnDuration Integer32,
slcConnDurationStr OCTET STRING,
slcConnIdle Integer32,
slcConnIdleStr OCTET STRING,
slcConnSourceIP IpAddress
}
slcConnIndex OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reference index for each connection."
::= { slcConnEntry 1 }
slcConnEndPt1 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A description of one of the end points of the connection."
::= { slcConnEntry 2 }
slcConnEndPt2 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A description of one of the end points of the connection."
::= { slcConnEntry 3 }
slcConnFlow OBJECT-TYPE
SYNTAX INTEGER { bidirectional(1),
endpt1toendpt2(2),
endpt2toendpt1(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The direction that data is flowing in the connection."
::= { slcConnEntry 4 }
slcConnUser OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The user that initiated the connection."
::= { slcConnEntry 5 }
slcConnDuration OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The duration, in seconds, that the connection has existed."
::= { slcConnEntry 6 }
slcConnDurationStr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The duration, formatted in hours:minutes:seconds, that the
connection has existed."
::= { slcConnEntry 7 }
slcConnIdle OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The amount of time that the connection has been idle,
in seconds."
::= { slcConnEntry 8 }
slcConnIdleStr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The amount of time that the connection has been idle,
formatted in hours:minutes:seconds."
::= { slcConnEntry 9 }
slcConnSourceIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For network (Telnet and SSH) connections into the SLC, the
source IP Address."
::= { slcConnEntry 10 }
--
-- System Group
--
slcSystemModel OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The model of the SLC: SLC8, SLC16, SLC32, SLC48, SLC8008,
SLC8016, SLC8024, SLC8032, SLC8040, SLC8048."
::= { slcSystem 1 }
slcSystemSerialNo OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The serial number of the SLC."
::= { slcSystem 2 }
slcSystemFWRev OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware version of the SLC."
::= { slcSystem 3 }
slcSystemLoadVia OBJECT-TYPE
SYNTAX INTEGER { ftp(1),
tftp(2),
sftp(3),
slm(4),
https(5),
nfs(6),
pccard(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The method used for firmware updates."
::= { slcSystem 4 }
slcSystemFTPServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP Address of the FTP/TFTP server used for firmware
updates, and for saving and restoring configurations."
::= { slcSystem 5 }
slcSystemFTPPath OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The path on the FTP server used for firmware updates, and
for saving and restoring configurations."
::= { slcSystem 6 }
slcSystemKeypadLock OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the LCD keypad is locked for editing
configuration. The keys can only be used to view settings."
::= { slcSystem 7 }
slcSystemTimeZone OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time zone of the SLC."
::= { slcSystem 8 }
slcSystemWelcomeBanner OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The banner displayed before the login prompt."
::= { slcSystem 9 }
slcSystemLoginBanner OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The banner displayed after successful login."
::= { slcSystem 10 }
slcSystemLogoutBanner OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The banner displayed after logout."
::= { slcSystem 11 }
slcSystemWebTimeout OBJECT-TYPE
SYNTAX Integer32 (0|5..120)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout (in minutes) for web sessions. A value of 0
indicates that timeouts are disabled."
::= { slcSystem 12 }
slcSystemWebGadget OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, iGoogle Gadget web content is enabled."
::= { slcSystem 13 }
slcSystemAction OBJECT-TYPE
SYNTAX INTEGER { noAction(1),
rebootSLC(2),
shutdownSLC(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Performs an action on the SLC. A read of this object always
returns the value noAction(1). Setting this object to
rebootSLC(2) will terminate all connections and reboot the
SLC. Setting this object to shutdownSLC(3) will terminate
all connections and shutdown the SLC so it can be powered off."
::= { slcSystem 14 }
slcSystemSSHPreAuthBanner OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The banner displayed prior to SSH authentication."
::= { slcSystem 15 }
slcSystemSiteRackRow OBJECT-TYPE
SYNTAX Integer32 (1..999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The identifier of the row of racks in a data center
containing the SLC."
::= { slcSystem 16 }
slcSystemSiteRackCluster OBJECT-TYPE
SYNTAX Integer32 (1..999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The identifier of the group of racks in a given row
(slcSystemSiteRackRow) containing the SLC."
::= { slcSystem 17 }
slcSystemSiteRack OBJECT-TYPE
SYNTAX Integer32 (1..999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The identifier of the rack in a given rack group
(slcSystemSiteRackCluster) containing the SLC."
::= { slcSystem 18 }
slcSystemLCDScreens OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A string describing the enabled LCD screens, in the order they
are displayed. Each screen is separated by a comma. The
possible screens are Current Time, Network, Console, Release,
Date/Time, Device Ports, Location, Temperature and User
Strings."
::= { slcSystem 19 }
slcSystemLCDUserStrLine1 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For the LCD screen User Strings, this is the first line
displayed on the LCD."
::= { slcSystem 20 }
slcSystemLCDUserStrLine2 OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For the LCD screen User Strings, this is the second line
displayed on the LCD."
::= { slcSystem 21 }
slcSystemLCDScrolling OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the LCD automatically scrolls through the
enabled screens."
::= { slcSystem 22 }
slcSystemLCDScrollDelay OBJECT-TYPE
SYNTAX Integer32 (1..60)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If LCD scrolling is enabled (slcSystemLCDScrolling), the
delay in seconds between displaying screens."
::= { slcSystem 23 }
slcSystemLCDIdleDelay OBJECT-TYPE
SYNTAX Integer32 (5..60)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If LCD scrolling is enabled (slcSystemLCDScrolling), the
number of seconds after keypad input before auto-scrolling
restarts."
::= { slcSystem 24 }
slcSystemInternalTemp OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The internal temperature of the SLC, given in Celsius.
A value of 9999 is returned if an error is encountered
reading the temperature."
::= { slcSystem 25 }
slcSystemWebProtocol OBJECT-TYPE
SYNTAX INTEGER { tlsv1SSLv3(1),
tlsv1SSLv3SSLv2(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The protocol used by the web server. This setting is no
longer available; the web server is configured to only
support the TLS protocol."
::= { slcSystem 26 }
slcSystemWebCipher OBJECT-TYPE
SYNTAX INTEGER { highMedium(1),
highMediumLow(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The strength of the cipher used by the web server. A cipher
with high strength uses 256, 168 or 128 bits; a cipher with
medium strength uses 128 bits; a cipher with low strength
uses 64 or 56 bits."
::= { slcSystem 27 }
slcSystemModelString OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A string that describes the SLC model:
<Model>-<Power Supply>-<PCCard or USB>"
::= { slcSystem 28 }
slcSystemWebGroup OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group or groups that may access the web."
::= { slcSystem 29 }
slcSystemWebInterface OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A string describing the interfaces the web is available on;
for example: Eth1,Eth2,PPP."
::= { slcSystem 30 }
slcSystemWebBanner OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The banner on the web home page."
::= { slcSystem 31 }
slcSystemInternalTempLow OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minimum acceptable internal temperature for the SLC,
in Celsius."
::= { slcSystem 32 }
slcSystemInternalTempHigh OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum acceptable internal temperature for the SLC,
in Celsius."
::= { slcSystem 33 }
slcSystemCalibrateTemp OBJECT-TYPE
SYNTAX Integer32
UNITS "Celsius"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An offset in Celsius for calibrating the internal temperature
of the SLC."
::= { slcSystem 34 }
slcSystemWebServer OBJECT-TYPE
SYNTAX EnabledState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled, the web server will run and listen on TCP
ports 80 and 443 (all requests to port 80 are redirected
to port 443)."
::= { slcSystem 35 }
-- SLC Monitoring Traps
slcEvents OBJECT IDENTIFIER ::= { slc 0 }
slcEventObjects OBJECT IDENTIFIER ::= { slc 7 }
slcPowerSupplyId OBJECT-TYPE
SYNTAX INTEGER { powerSupplyA(1),
powerSupplyB(2),
primaryInlet(3),
secondaryInlet(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The identifier of the power supply in a slcEventPowerSupply
trap."
::= { slcEventObjects 1 }
slcPowerSupplyAction OBJECT-TYPE
SYNTAX INTEGER { powerSupplyFailed(1), powerSupplyRestored(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The action that occurred for a power supply in a
slcEventPowerSupply trap."
::= { slcEventObjects 2 }
slcDevPortNumBytes OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of bytes received on a Device Port to trigger a
slcEventDevicePortData or slcEventDevicePortSLMData trap."
::= { slcEventObjects 3 }
slcDevPortData OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The character data received on a Device Port to trigger a
slcEventDevicePortData trap."
::= { slcEventObjects 4 }
slcDevPortStartByte OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The starting byte within the logging buffer of data received
on a Device Port, which triggered a slcEventDevicePortSLMData
trap."
::= { slcEventObjects 5 }
slcDevPortTimeFrame OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time frame, in seconds, after which a
slcEventDevicePortSLMData trap is sent to the SLM to trigger
retrieval of Device Port data."
::= { slcEventObjects 6 }
slcDevPortDeviceErrorStatus OBJECT-TYPE
SYNTAX INTEGER { lowPower(1), damageOrTamper(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status returned when an error occurs in a device connected
to a Device Port."
::= { slcEventObjects 7 }
slcHostname OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hostname of the SLC sending the trap."
::= { slcEventObjects 8 }
slcPCCardSlot OBJECT-TYPE
SYNTAX INTEGER { upperSlot(1), lowerSlot(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The PC Card slot indicated for the trap."
::= { slcEventObjects 9 }
slcPCCardAction OBJECT-TYPE
SYNTAX INTEGER { cardInserted(1), cardRemoved(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The action that occurred on a PC Card slot."
::= { slcEventObjects 10 }
slcPCCardType OBJECT-TYPE
SYNTAX INTEGER { none(1),
storage(2),
modem(3),
isdn(4),
wireless(5),
gsmmodem(6) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of card inserted in a PC Card slot."
::= { slcEventObjects 11 }
slcUSBAction OBJECT-TYPE
SYNTAX INTEGER { deviceInserted(1),
deviceRemoved(2),
noModemDialTone(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The action that occurred on a USB Port."
::= { slcEventObjects 12 }
slcUSBType OBJECT-TYPE
SYNTAX INTEGER { none(1),
storage(2),
modem(3),
isdn(4),
wireless(5),
gsmmodem(6) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of device inserted in a USB Port."
::= { slcEventObjects 13 }
slcDevPortErrorStatus OBJECT-TYPE
SYNTAX INTEGER { dataDrop(1),
invalidIOConfiguration(2),
errorIOModules(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status returned when an error occurs in a Device Port.
dataDrop applies to a specific Device Port and is sent when
a Device Port is required to discard data in order to keep
data moving for all connections to the Device Port.
invalidIOConfiguration and errorIOModules apply to all
Device Ports. invalidIOConfiguration is sent when the I/O
modules installed in a SLC are in an invalid configuration.
errorIOModules is sent when an error is detected in one or
more I/O modules."
::= { slcEventObjects 14 }
slcSDCardAction OBJECT-TYPE
SYNTAX INTEGER { deviceInserted(1),
deviceRemoved(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The action that occurred on the SD Card slot."
::= { slcEventObjects 15 }
slcRPMAction OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The action that occurred on a Remote Power Manager."
::= { slcEventObjects 16 }
slcEventHost OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name or IP address of a host in a SLC event."
::= { slcEventObjects 17 }
slcEventPowerSupply NOTIFICATION-TYPE
OBJECTS { slcPowerSupplyId, slcPowerSupplyAction }
STATUS current
DESCRIPTION "The SNMP trap that is generated when a power supply fails
or is restored."
::= { slcEvents 1 }
slcEventSysadminPassword NOTIFICATION-TYPE
STATUS current
DESCRIPTION "The SNMP trap that is generated when the sysadmin user
password is changed."
::= { slcEvents 2 }
slcEventSLCShutdown NOTIFICATION-TYPE
STATUS current
DESCRIPTION "The SNMP trap that is generated when the SLC is shutdown."
::= { slcEvents 3 }
slcEventDevicePortData NOTIFICATION-TYPE
OBJECTS { slcDevPortId, slcDevPortNumBytes, slcDevPortData,
slcDevPortCfgEmailTextString, slcHostname }
STATUS current
DESCRIPTION "The SNMP trap that is generated when data is received on a
Device Port, and the Device Port has been configured to
generate a trap when a specified number of bytes
(slcDevPortNumBytes) or a specified sequence of bytes
(slcDevPortCfgEmailTextString) is received.
slcDevPortData is the actual data received."
::= { slcEvents 4 }
slcEventDevicePortSLMData NOTIFICATION-TYPE
OBJECTS { slcDevPortId, slcDevPortNumBytes, slcDevPortStartByte }
STATUS current
DESCRIPTION "The SNMP trap that is generated when data is received on a
Device Port, and the Device Port has been configured to
generate a trap designated for the Secure Lantronix Management
Appliance (SLM) when a specified number of bytes is received
or a specified time frame is passed. This trap is only sent
to the SLM."
::= { slcEvents 5 }
slcEventDevicePortSLMConfig NOTIFICATION-TYPE
OBJECTS { slcDevPortId, slcDevPortNumBytes, slcDevPortTimeFrame }
STATUS current
DESCRIPTION "The SNMP trap that is generated when the SLM logging
configuration is changed for a Device Port, and the Device
Port has been configured to generate a trap designated for
the Secure Lantronix Management Appliance (SLM). This trap
specifies the new SLM logging configuration for the Device
Port, and is only sent to the SLM."
::= { slcEvents 6 }
slcEventDevicePortDeviceLowTemp NOTIFICATION-TYPE
OBJECTS { slcDevPortId, slcDevPortCfgDevTemperature,
slcDevPortCfgDevLowTemp }
STATUS current
DESCRIPTION "The SNMP trap that is generated when the low temperature
limit for a sensor connected to a Device Port is exceeded."
::= { slcEvents 7 }
slcEventDevicePortDeviceHighTemp NOTIFICATION-TYPE
OBJECTS { slcDevPortId, slcDevPortCfgDevTemperature,
slcDevPortCfgDevHighTemp }
STATUS current
DESCRIPTION "The SNMP trap that is generated when the high temperature
limit for a sensor connected to a Device Port is exceeded."
::= { slcEvents 8 }
slcEventDevicePortDeviceLowHumidity NOTIFICATION-TYPE
OBJECTS { slcDevPortId, slcDevPortCfgDevHumidity,
slcDevPortCfgDevLowHumidity }
STATUS current
DESCRIPTION "The SNMP trap that is generated when the low humidity
limit for a sensor connected to a Device Port is exceeded."
::= { slcEvents 9 }
slcEventDevicePortDeviceHighHumidity NOTIFICATION-TYPE
OBJECTS { slcDevPortId, slcDevPortCfgDevHumidity,
slcDevPortCfgDevHighHumidity }
STATUS current
DESCRIPTION "The SNMP trap that is generated when the high humidity
limit for a sensor connected to a Device Port is exceeded."
::= { slcEvents 10 }
slcEventDevicePortDeviceError NOTIFICATION-TYPE
OBJECTS { slcDevPortId, slcDevPortDeviceErrorStatus }
STATUS current
DESCRIPTION "The SNMP trap that is generated when an error occurs on a
device connected to a Device Port."
::= { slcEvents 11 }
slcEventPCCardAction NOTIFICATION-TYPE
OBJECTS { slcPCCardSlot, slcPCCardAction, slcPCCardType }
STATUS current
DESCRIPTION "The SNMP trap that is generated when an event occurs on one
of the PC Card slots."
::= { slcEvents 12 }
slcEventSLCInternalTemp NOTIFICATION-TYPE
OBJECTS { slcSystemInternalTemp }
STATUS current
DESCRIPTION "The SNMP trap that is generated when the internal temperature
of the SLC is outside of the acceptable operating range."
::= { slcEvents 13 }
slcEventUSBAction NOTIFICATION-TYPE
OBJECTS { slcDevUSBId, slcUSBAction, slcUSBType }
STATUS current
DESCRIPTION "The SNMP trap that is generated when an event occurs on one
of the USB Ports."
::= { slcEvents 14 }
slcEventDevicePortError NOTIFICATION-TYPE
OBJECTS { slcDevPortId, slcDevPortErrorStatus }
STATUS current
DESCRIPTION "The SNMP trap that is generated when an error occurs on a
a Device Port, or across all Device Ports. If an error
occurs across all Device Ports, slcDevPortId will be 1 (one)."
::= { slcEvents 15 }
slcEventSDCardAction NOTIFICATION-TYPE
OBJECTS { slcSDCardAction }
STATUS current
DESCRIPTION "The SNMP trap that is generated when an event occurs on the
SD Card slot."
::= { slcEvents 16 }
slcEventNoDialToneAlarm NOTIFICATION-TYPE
STATUS current
DESCRIPTION "The SNMP trap that is generated when an event indicates
that a no-dial-tone condition on the internal modem exists."
::= { slcEvents 17 }
slcEventRPMAction NOTIFICATION-TYPE
OBJECTS { slcDevRPMName, slcRPMAction }
STATUS current
DESCRIPTION "The SNMP trap that is generated when an event occurs on one
of the Remote Power Manager (UPS or PDU) devices."
::= { slcEvents 18 }
slcEventPingHostFails NOTIFICATION-TYPE
OBJECTS { slcEventHost }
STATUS current
DESCRIPTION "The SNMP trap that is generated when the SLC is monitoring
a host with regular pings and the SLC is unable to ping the
host. The trap includes either the name or the IP address
of the failed host."
::= { slcEvents 19 }
END
Reference in New Issue View Git Blame Copy Permalink