1252 lines
42 KiB
Plaintext
1252 lines
42 KiB
Plaintext
ALCATEL-IND1-DOT1X-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Integer32, IpAddress
|
|
FROM SNMPv2-SMI
|
|
DisplayString, MacAddress, TimeStamp, TEXTUAL-CONVENTION, TruthValue
|
|
FROM SNMPv2-TC
|
|
softentIND1Dot1X
|
|
FROM ALCATEL-IND1-BASE
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
InterfaceIndex, InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
dot1xPaePortNumber
|
|
FROM IEEE8021-PAE-MIB
|
|
;
|
|
|
|
alcatelIND1Dot1XMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201002100000Z"
|
|
ORGANIZATION "Alcatel-Lucent"
|
|
CONTACT-INFO
|
|
"Please consult with Customer Service to ensure the most appropriate
|
|
version of this document is used with the products in question:
|
|
|
|
Alcatel-Lucent, Enterprise Solutions Division
|
|
(Formerly Alcatel Internetworking, Incorporated)
|
|
26801 West Agoura Road
|
|
Agoura Hills, CA 91301-5122
|
|
United States Of America
|
|
|
|
Telephone: North America +1 800 995 2696
|
|
Latin America +1 877 919 9526
|
|
Europe +31 23 556 0100
|
|
Asia +65 394 7933
|
|
All Other +1 818 878 4507
|
|
|
|
Electronic Mail: support@ind.alcatel.com
|
|
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
|
|
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
|
|
|
|
DESCRIPTION
|
|
"This module describes an authoritative enterprise-specific Simple
|
|
Network Management Protocol (SNMP) Management Information Base (MIB):
|
|
|
|
|
|
The Port Access Entity module for managing 802.1X for
|
|
the Birds Of Prey Product Line
|
|
|
|
The right to make changes in specification and other information
|
|
contained in this document without prior notice is reserved.
|
|
|
|
No liability shall be assumed for any incidental, indirect, special, or
|
|
consequential damages whatsoever arising from or related to this
|
|
document or the information contained herein.
|
|
|
|
Vendors, end-users, and other interested parties are granted
|
|
non-exclusive license to use this specification in connection with
|
|
management of the products for which it is intended to be used.
|
|
|
|
Copyright (C) 1995-2007 Alcatel-Lucent
|
|
ALL RIGHTS RESERVED WORLDWIDE"
|
|
|
|
|
|
REVISION "201002100000Z"
|
|
DESCRIPTION
|
|
"Addressing maximum number character supported in URL and DNS mibs."
|
|
|
|
REVISION "200704030000Z"
|
|
DESCRIPTION
|
|
"Addressing discrepancies with Alcatel Standard."
|
|
::= { softentIND1Dot1X 1}
|
|
|
|
alaIND1Dot1XMIBObjects OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Branch For 802.1X
|
|
Subsystem Managed Objects."
|
|
::= { alcatelIND1Dot1XMIB 1 }
|
|
|
|
|
|
alaIND1Dot1XMIBConformance OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Branch For 802.1X
|
|
Subsystem Conformance Information."
|
|
::= { alcatelIND1Dot1XMIB 2 }
|
|
|
|
|
|
alaIND1Dot1XMIBGroups OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Branch For 802.1X
|
|
Subsystem Units Of Conformance."
|
|
::= { alaIND1Dot1XMIBConformance 1 }
|
|
|
|
ALADot1xClassificationPolicyType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This policy type is the classification policy used to classify
|
|
a device onto the system. "
|
|
SYNTAX INTEGER {
|
|
dotXAuthentication (0),
|
|
macAuthentication (1),
|
|
groupMobilityRules (2),
|
|
vlanId (3),
|
|
defaultVlan (4),
|
|
block (5),
|
|
internalUseOnlyA (6),
|
|
internalUseOnlyB (7),
|
|
internalUseOnlyC (8),
|
|
captivePortalAuthentication (9),
|
|
captivePortalGroupMobility (10),
|
|
captivePortalDefaultVlan (11),
|
|
captivePortalVlanId (12),
|
|
captivePortalBlock (13),
|
|
captivePortalUnknown (14),
|
|
captivePortalUnpAuthSrv (15),
|
|
captivePortalUnpUsrCfg (16),
|
|
captivePortalUnpAAArule (17),
|
|
authServerUNP (18),
|
|
userConfigUNP (19),
|
|
aaaRuleUNP (20),
|
|
aaaAuthSvrDownUNP (21),
|
|
aaaAuthSvrDownBlock (22)
|
|
}
|
|
|
|
ALADot1xAuthenticationType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of authentication used"
|
|
SYNTAX INTEGER {
|
|
noAuthentication (0),
|
|
dotXAuthentication (1),
|
|
macAuthentication (2),
|
|
captivePortal (3)
|
|
}
|
|
|
|
ALADot1xAuthenticationResult ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of the authentication. If the ALADot1xAuthenticationType of this
|
|
device is noAuthentication then this object will return notApplicable. If the
|
|
authentication has not completed then this object will return inProgress."
|
|
SYNTAX INTEGER {
|
|
notApplicable (0),
|
|
inProgress (1),
|
|
success (2),
|
|
fail (3)
|
|
}
|
|
|
|
ALADot1xMacLearntState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of MAC address in the system"
|
|
SYNTAX INTEGER {
|
|
bridging (0), -- Normal access to the network.
|
|
filtering (1), -- Access to the network blocked.
|
|
hicInProgress (2), -- Host Integrity Check in progress.
|
|
qmrInProgress (3) -- QMR in progress.
|
|
}
|
|
|
|
ALADot1xMacQueryType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The query type of MAC address in the system. This query MAC address type
|
|
is used to specify which type of MAC address to query from the
|
|
alaDot1xDeviceStatusTable."
|
|
SYNTAX INTEGER {
|
|
all (0), -- All devices on the port.
|
|
supplicant (1), -- All supplicants on the port.
|
|
nonSupplicant (2), -- All non-supplicant on the port.
|
|
captivePortal (3) -- All devices on the port that used Captive Portal.
|
|
}
|
|
|
|
ALADot1xDeviceType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of device. Either supplicant or non-supplicant."
|
|
SYNTAX INTEGER {
|
|
supplicant (1),
|
|
nonSupplicant (2)
|
|
}
|
|
|
|
----------------------------------------------------------
|
|
---------- Logical Port table ----------------------------
|
|
----------------------------------------------------------
|
|
alaDot1xPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaDot1xPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table of system level information for each port
|
|
supported by the Port Access Entity. An entry appears
|
|
in this table for each port of this system."
|
|
REFERENCE
|
|
"9.6.1"
|
|
::= { alaIND1Dot1XMIBObjects 1 }
|
|
|
|
alaDot1xPortEntry OBJECT-TYPE
|
|
SYNTAX AlaDot1xPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"TP DO: Add description here "
|
|
INDEX { dot1xPaePortNumber }
|
|
::= { alaDot1xPortTable 1 }
|
|
|
|
|
|
AlaDot1xPortEntry ::=
|
|
SEQUENCE {
|
|
alaDot1xPortSlotNumber
|
|
INTEGER,
|
|
alaDot1xPortPortNumber
|
|
INTEGER,
|
|
alaDot1xPortMACAddress
|
|
MacAddress,
|
|
alaDot1xPortVlan
|
|
INTEGER,
|
|
alaDot1xPortProtocol
|
|
INTEGER,
|
|
alaDot1xPortUserName
|
|
DisplayString,
|
|
alaDot1xPortState
|
|
INTEGER,
|
|
alaDot1xSupplicantPolicyUsed
|
|
ALADot1xClassificationPolicyType
|
|
}
|
|
|
|
alaDot1xPortSlotNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The slot that the logical port represented by the dot1xPaePortNumber resides."
|
|
::= { alaDot1xPortEntry 1 }
|
|
|
|
alaDot1xPortPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..48)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The user port that the logical port represented by the dot1xPaePortNumber resides."
|
|
::= { alaDot1xPortEntry 2 }
|
|
|
|
alaDot1xPortMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The MAC address of the supplicant that along with the slot and port uniquely
|
|
form the logical port represented by the dot1xPaePortNumber."
|
|
::= { alaDot1xPortEntry 3 }
|
|
|
|
alaDot1xPortVlan OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The vlan that the supplicant is authorized to access."
|
|
::= { alaDot1xPortEntry 4 }
|
|
|
|
alaDot1xPortProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER (1..6)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The protocol that is authorized for the supplicant. This is used in conjunction
|
|
with the alaDot1xPortVlan object. Supplicant can be authorized to different vlans
|
|
for different protocol."
|
|
::= { alaDot1xPortEntry 5 }
|
|
|
|
alaDot1xPortUserName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The user name of the supplicant used for authentication."
|
|
::= { alaDot1xPortEntry 6 }
|
|
|
|
alaDot1xPortState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
initialize (1),
|
|
disconnected (2),
|
|
connecting (3),
|
|
authenticating (4),
|
|
authenticated (5),
|
|
aborting (6),
|
|
held (7),
|
|
forceAuthenticated (8),
|
|
forceUnauthenticated (9),
|
|
authenticatedLocally (10)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The State of the port."
|
|
::= { alaDot1xPortEntry 7 }
|
|
|
|
alaDot1xSupplicantPolicyUsed OBJECT-TYPE
|
|
SYNTAX ALADot1xClassificationPolicyType
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Classification Policy under which the 802.1x supplicant is learned."
|
|
::= { alaDot1xPortEntry 8 }
|
|
|
|
----------------------------------------------------------
|
|
----------Dot1x MAC table --------------------------------
|
|
----------------------------------------------------------
|
|
|
|
alaDot1xMacTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaDot1xMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provide the list of users currently authenticated into the
|
|
switch for bridging purpose."
|
|
::= { alaIND1Dot1XMIBObjects 4 }
|
|
|
|
alaDot1xMacEntry OBJECT-TYPE
|
|
SYNTAX AlaDot1xMacEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the AaaAuthenticatedUserTable."
|
|
INDEX {alaDot1xMACAddress}
|
|
::= { alaDot1xMacTable 1 }
|
|
|
|
AlaDot1xMacEntry ::=
|
|
SEQUENCE {
|
|
alaDot1xMACAddress
|
|
MacAddress,
|
|
alaDot1xMacIfIndex
|
|
InterfaceIndex,
|
|
alaDot1xMacSlotNumber
|
|
Integer32,
|
|
alaDot1xMacPortNumber
|
|
Integer32,
|
|
alaDot1xMacVlan
|
|
Integer32,
|
|
alaDot1xMacProtocol
|
|
Integer32,
|
|
alaDot1xMacUserName
|
|
DisplayString,
|
|
alaDot1xMacState
|
|
INTEGER,
|
|
alaDot1xMacSupplicantPolicyUsed
|
|
ALADot1xClassificationPolicyType
|
|
}
|
|
|
|
alaDot1xMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the supplicant that along with the slot and port uniquely
|
|
form the logical port represented by the dot1xPaePortNumber."
|
|
::= { alaDot1xMacEntry 1 }
|
|
|
|
alaDot1xMacIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interface index in which alaDot1xMACAddress was learned."
|
|
::= { alaDot1xMacEntry 2 }
|
|
|
|
|
|
alaDot1xMacSlotNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot in which alaDot1xMACAddress was learned."
|
|
::= { alaDot1xMacEntry 3 }
|
|
|
|
alaDot1xMacPortNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..48)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user port in which alaDot1xMACAddress was learned."
|
|
::= { alaDot1xMacEntry 4 }
|
|
|
|
alaDot1xMacVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlan that the supplicant is authorized to access."
|
|
::= { alaDot1xMacEntry 5 }
|
|
|
|
alaDot1xMacProtocol OBJECT-TYPE
|
|
SYNTAX Integer32 (1..6)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protocol that is authorized for the supplicant. This is used in conjunction
|
|
with the alaDot1xMacVlan object. Supplicant can be authorized to different vlans
|
|
for different protocol."
|
|
::= { alaDot1xMacEntry 6 }
|
|
|
|
alaDot1xMacUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user name of the supplicant used for authentication."
|
|
::= { alaDot1xMacEntry 7 }
|
|
|
|
alaDot1xMacState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
initialize (1),
|
|
disconnected (2),
|
|
connecting (3),
|
|
authenticating (4),
|
|
authenticated (5),
|
|
aborting (6),
|
|
held (7),
|
|
forceAuthenticated (8),
|
|
forceUnauthenticated (9),
|
|
authenticatedLocally (10)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The State of the port in which the current mac-address was learned."
|
|
::= { alaDot1xMacEntry 8 }
|
|
|
|
alaDot1xMacSupplicantPolicyUsed OBJECT-TYPE
|
|
SYNTAX ALADot1xClassificationPolicyType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Classification Policy under which the 802.1x supplicant is learned."
|
|
::= { alaDot1xMacEntry 9 }
|
|
|
|
|
|
----------------------------------------------------------
|
|
|
|
----------------------------------------------------------
|
|
-------------- Reverse lookup table ----------------------
|
|
----------------------------------------------------------
|
|
alaDot1xPortLookupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaDot1xPortLookupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of which allows to find the logical port number
|
|
given the physical slot/port/MAC. An entry appears
|
|
in this table for each logical port of this system."
|
|
::= { alaIND1Dot1XMIBObjects 2 }
|
|
|
|
alaDot1xPortLookupEntry OBJECT-TYPE
|
|
SYNTAX AlaDot1xPortLookupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The translation table to look up the dot1xPaePortNumber."
|
|
INDEX { alaDot1xPortLookupSlotNumber,
|
|
alaDot1xPortLookupPortNumber,
|
|
alaDot1xPortLookupMACAddress }
|
|
::= { alaDot1xPortLookupTable 1 }
|
|
|
|
AlaDot1xPortLookupEntry ::=
|
|
SEQUENCE {
|
|
alaDot1xPortLookupSlotNumber
|
|
INTEGER,
|
|
alaDot1xPortLookupPortNumber
|
|
INTEGER,
|
|
alaDot1xPortLookupMACAddress
|
|
MacAddress,
|
|
alaDot1xPortLookupInterfaceNumber
|
|
InterfaceIndex
|
|
}
|
|
|
|
alaDot1xPortLookupSlotNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot that the logical port represented by the dot1xPaePortNumber resides."
|
|
::= { alaDot1xPortLookupEntry 1 }
|
|
|
|
alaDot1xPortLookupPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..48)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The physical port that the logical port represented by the dot1xPaePortNumber resides."
|
|
::= { alaDot1xPortLookupEntry 2 }
|
|
|
|
alaDot1xPortLookupMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the supplicant that along with the slot and port uniquely
|
|
form the logical port represented by the dot1xPaePortNumber."
|
|
::= { alaDot1xPortLookupEntry 3 }
|
|
|
|
alaDot1xPortLookupInterfaceNumber OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex that represnets the slot and port where the dot1xPaePortNumber resides."
|
|
::= { alaDot1xPortLookupEntry 4 }
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
-- Guest VLAN Configuration table - WILL NEVER BE SUPPORTED
|
|
-- but keep the OID reserved
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
-- alaDot1xGuestVlanConfTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF AlaDot1xGuestVlanConfEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A table of guest vlan ID supported by the Port Access Entity.
|
|
-- An entry appears in this table for each port of this system."
|
|
-- ::= { alaIND1Dot1XMIBObjects 3 }
|
|
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
-- Non 802.1x supplicant table
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
alaDot1xNonSupplicantTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaDot1xNonSupplicantEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of non 802.1x supplicants learned on 802.1x authenticated ports."
|
|
::= { alaIND1Dot1XMIBObjects 5 }
|
|
|
|
alaDot1xNonSupplicantEntry OBJECT-TYPE
|
|
SYNTAX AlaDot1xNonSupplicantEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Non 802.1x supplicant information."
|
|
INDEX { alaDot1xNonSupplicantIntfNum,
|
|
alaDot1xNonSupplicantMACAddress }
|
|
::= { alaDot1xNonSupplicantTable 1 }
|
|
|
|
|
|
AlaDot1xNonSupplicantEntry ::=
|
|
SEQUENCE {
|
|
alaDot1xNonSupplicantIntfNum InterfaceIndex,
|
|
alaDot1xNonSupplicantMACAddress MacAddress,
|
|
alaDot1xNonSupplicantVlanID INTEGER,
|
|
alaDot1xNonSupplicantPolicyUsed ALADot1xClassificationPolicyType,
|
|
alaDot1xAuthenticationStatus INTEGER
|
|
}
|
|
|
|
alaDot1xNonSupplicantIntfNum OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex represneting the slot and port where the non 802.1x supplicant is learned."
|
|
::= { alaDot1xNonSupplicantEntry 1 }
|
|
|
|
alaDot1xNonSupplicantMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the non 802.1x supplicant."
|
|
::= { alaDot1xNonSupplicantEntry 2 }
|
|
|
|
alaDot1xNonSupplicantVlanID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Id of the VLAN on which the non 802.1x supplicant is learned."
|
|
::= { alaDot1xNonSupplicantEntry 3 }
|
|
|
|
alaDot1xNonSupplicantPolicyUsed OBJECT-TYPE
|
|
SYNTAX ALADot1xClassificationPolicyType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Classification policy under which the non 802.1x supplicant is learned."
|
|
::= { alaDot1xNonSupplicantEntry 4 }
|
|
|
|
alaDot1xAuthenticationStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
idle (1),
|
|
inProgress (2),
|
|
authenticated (3),
|
|
failed (4),
|
|
failedTimeout (5),
|
|
failedNoServer (6),
|
|
failedNoResources (7)
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication status of the non 802.1x supplicant."
|
|
::= { alaDot1xNonSupplicantEntry 5 }
|
|
|
|
|
|
-- alaDot1xNonSuppPolicy
|
|
-- alaDot1xSuppPolicy
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
-- Authentication Policy Configuration table
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
alaDot1xAuthPolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaDot1xAuthPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of supplicant and non supplicant device classification policies
|
|
as they are configured on 802.1x authenticated ports."
|
|
::= { alaIND1Dot1XMIBObjects 6 }
|
|
|
|
alaDot1xAuthPolicyEntry OBJECT-TYPE
|
|
SYNTAX AlaDot1xAuthPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Device classification policies information."
|
|
INDEX { alaDot1xAuthPolicyIntfNumber }
|
|
::= { alaDot1xAuthPolicyTable 1 }
|
|
|
|
|
|
AlaDot1xAuthPolicyEntry ::=
|
|
SEQUENCE {
|
|
alaDot1xAuthPolicyIntfNumber InterfaceIndex,
|
|
alaDot1xNonSuppPolicy DisplayString,
|
|
alaDot1xSuppPolicy DisplayString,
|
|
alaDot1xPollingCnt Integer32,
|
|
alaDot1xCaptivePortalPolicy DisplayString,
|
|
alaDot1xCPortalSessionLimit Integer32,
|
|
alaDot1xCPortalRetryCnt Integer32
|
|
}
|
|
alaDot1xAuthPolicyIntfNumber OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex that represnets the slot and port where the device classification
|
|
policies are configured."
|
|
::= { alaDot1xAuthPolicyEntry 1 }
|
|
|
|
alaDot1xNonSuppPolicy OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..127))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MAC based authentication -> M
|
|
Group Mobility -> G
|
|
VLAN ID -> <vlan id>
|
|
Default VLAN -> D
|
|
Block -> B
|
|
Fail -> ,
|
|
Captive Portal -> C
|
|
|
|
Examples: MGD,GB. The default value is B (block). If the string size is zero (0), the
|
|
default value is used."
|
|
::= { alaDot1xAuthPolicyEntry 2 }
|
|
|
|
alaDot1xSuppPolicy OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..127))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"802.1x authentication -> X
|
|
Group Mobility -> G
|
|
VLAN ID -> <vlan id>
|
|
Default VLAN -> D
|
|
Block -> B
|
|
Fail -> ,
|
|
Captive Portal -> C
|
|
|
|
Default value: XGD,B. If the string size is zero (0), the default value is used."
|
|
::= { alaDot1xAuthPolicyEntry 3 }
|
|
|
|
alaDot1xPollingCnt OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of retries to poll the end station for EAPoL frame before
|
|
classifying the end station with group mobility or guest vlan ID configured.
|
|
If the value is set to zero (0), it indicates a special case where the port will
|
|
ignore any EAP frame from the client and this will force all devices to the
|
|
non-supplicant policy for classification."
|
|
::= { alaDot1xAuthPolicyEntry 4 }
|
|
|
|
alaDot1xCaptivePortalPolicy OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..127))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Web authentication -> W
|
|
Group Mobility -> G
|
|
VLAN ID -> <vlan id>
|
|
Default VLAN -> D
|
|
Block -> B
|
|
Fail -> ,
|
|
|
|
Default value: XGD,B, if string size is zero, the default value is used."
|
|
::= { alaDot1xAuthPolicyEntry 5 }
|
|
|
|
alaDot1xCPortalSessionLimit OBJECT-TYPE
|
|
SYNTAX Integer32 (0..999)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Captive Portal Session limit is the interval that a Captive Portal user can login.
|
|
User is to be logged off after the session limit. If the session limit is set to
|
|
zero (0), it means the session is unlimited, user will not be automatically logged off."
|
|
::= { alaDot1xAuthPolicyEntry 6 }
|
|
|
|
alaDot1xCPortalRetryCnt OBJECT-TYPE
|
|
SYNTAX Integer32 (0..999)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of retries for the Captive Portal user to provide the user
|
|
credential before the software will classify the user to the failed
|
|
policy according the the alaDot1xCaptivePortalPolicy."
|
|
::= { alaDot1xAuthPolicyEntry 7 }
|
|
|
|
|
|
alaDot1xCportalConfig OBJECT IDENTIFIER ::= { alaIND1Dot1XMIBObjects 7 }
|
|
|
|
alaDot1xCPortalIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The factory default Captive Portal IP address is 10.123.0.1.
|
|
If the 10.123.0.0 subnet is already in use, user can change
|
|
the Captive Portal IP address to another 10.x.0.0 subnet.
|
|
Only the second octet of the Captive Portal IP address can
|
|
be changed."
|
|
::= { alaDot1xCportalConfig 1 }
|
|
|
|
alaDot1xCPortalProxyURL OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The factory default for Captive Portal working with proxy
|
|
server url has the key word proxy. If the user's proxy
|
|
server url does not have the key work proxy, user can use
|
|
this object to specify the proxy server url. If none is specified
|
|
this object will return the default value - proxy."
|
|
::= { alaDot1xCportalConfig 2 }
|
|
|
|
alaDot1xCPortalPostAuthSuccessRedirectURL OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Captive Portal's Redirect URL upon successful authentication."
|
|
::= { alaDot1xCportalConfig 3 }
|
|
|
|
alaDot1xCPortalPostAuthFailRedirectURL OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Captive Portal's Redirect URL upon failed authentication."
|
|
::= { alaDot1xCportalConfig 4 }
|
|
|
|
alaDot1xCPortalDNSKeyword1 OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Captive Portal's DNS keyword string."
|
|
::= { alaDot1xCportalConfig 5 }
|
|
|
|
alaDot1xCPortalDNSKeyword2 OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Captive Portal's DNS keyword string."
|
|
::= { alaDot1xCportalConfig 6 }
|
|
|
|
alaDot1xCPortalDNSKeyword3 OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Captive Portal's DNS keyword string."
|
|
::= { alaDot1xCportalConfig 7 }
|
|
|
|
alaDot1xCPortalDNSKeyword4 OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Captive Portal's DNS keyword string."
|
|
::= { alaDot1xCportalConfig 8 }
|
|
|
|
|
|
|
|
----------------------------------------------------------
|
|
---------- Device Status Table ----------------------------
|
|
----------------------------------------------------------
|
|
alaDot1xDeviceStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaDot1xDeviceStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of system level information for each port
|
|
supported by the Port Access Entity. An entry appears
|
|
in this table for each port of this system."
|
|
::= { alaIND1Dot1XMIBObjects 8 }
|
|
|
|
alaDot1xDeviceStatusEntry OBJECT-TYPE
|
|
SYNTAX AlaDot1xDeviceStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"One entry of the Device Status Table. "
|
|
INDEX { alaDot1xDeviceStatusMacQueryType,
|
|
alaDot1xDeviceStatusSlotNumber,
|
|
alaDot1xDeviceStatusPortNumber,
|
|
alaDot1xDeviceStatusMACAddress,
|
|
alaDot1xDeviceStatusDeviceType }
|
|
::= { alaDot1xDeviceStatusTable 1 }
|
|
|
|
|
|
AlaDot1xDeviceStatusEntry ::=
|
|
SEQUENCE {
|
|
alaDot1xDeviceStatusMacQueryType
|
|
ALADot1xMacQueryType,
|
|
alaDot1xDeviceStatusSlotNumber
|
|
INTEGER,
|
|
alaDot1xDeviceStatusPortNumber
|
|
INTEGER,
|
|
alaDot1xDeviceStatusMACAddress
|
|
MacAddress,
|
|
alaDot1xDeviceStatusDeviceType
|
|
ALADot1xDeviceType,
|
|
alaDot1xDeviceStatusVlan
|
|
INTEGER,
|
|
alaDot1xDeviceStatusIPAddress
|
|
IpAddress,
|
|
alaDot1xDeviceStatusUserName
|
|
SnmpAdminString,
|
|
alaDot1xDeviceStatusProfileUsed
|
|
SnmpAdminString,
|
|
alaDot1xDeviceStatusAuthType
|
|
ALADot1xAuthenticationType,
|
|
alaDot1xDeviceStatusPolicyUsed
|
|
ALADot1xClassificationPolicyType,
|
|
alaDot1xDeviceStatusAuthResult
|
|
ALADot1xAuthenticationResult,
|
|
alaDot1xDeviceStatusMacLearntState
|
|
ALADot1xMacLearntState,
|
|
alaDot1xDeviceStatusTimeLearned
|
|
TimeStamp,
|
|
alaDot1xDeviceStatusCaptivePortalUsed
|
|
TruthValue
|
|
}
|
|
|
|
alaDot1xDeviceStatusMacQueryType OBJECT-TYPE
|
|
SYNTAX ALADot1xMacQueryType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of MAC address to query."
|
|
::= { alaDot1xDeviceStatusEntry 1 }
|
|
|
|
alaDot1xDeviceStatusSlotNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot that the device reporting the status resides."
|
|
::= { alaDot1xDeviceStatusEntry 2 }
|
|
|
|
alaDot1xDeviceStatusPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..48)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user port that the device reporting the status resides."
|
|
::= { alaDot1xDeviceStatusEntry 3 }
|
|
|
|
alaDot1xDeviceStatusMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the device reporting the status."
|
|
::= { alaDot1xDeviceStatusEntry 4 }
|
|
|
|
alaDot1xDeviceStatusDeviceType OBJECT-TYPE
|
|
SYNTAX ALADot1xDeviceType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of device. Either supplicant or non-supplicant."
|
|
::= { alaDot1xDeviceStatusEntry 5 }
|
|
|
|
alaDot1xDeviceStatusVlan OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vlan that the device reporting the status is authorized to access."
|
|
::= { alaDot1xDeviceStatusEntry 6 }
|
|
|
|
alaDot1xDeviceStatusIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the device reporting the status."
|
|
::= { alaDot1xDeviceStatusEntry 7 }
|
|
|
|
alaDot1xDeviceStatusUserName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user name of the device reporting the status."
|
|
::= { alaDot1xDeviceStatusEntry 8 }
|
|
|
|
alaDot1xDeviceStatusProfileUsed OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the User Network Profile entry used when the
|
|
device reporting the status is classified."
|
|
::= { alaDot1xDeviceStatusEntry 9 }
|
|
|
|
alaDot1xDeviceStatusAuthType OBJECT-TYPE
|
|
SYNTAX ALADot1xAuthenticationType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of authentication used by the device reporting
|
|
the status to obtain network access."
|
|
::= { alaDot1xDeviceStatusEntry 10 }
|
|
|
|
alaDot1xDeviceStatusPolicyUsed OBJECT-TYPE
|
|
SYNTAX ALADot1xClassificationPolicyType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Classification Policy under which the device is learned."
|
|
::= { alaDot1xDeviceStatusEntry 11 }
|
|
|
|
alaDot1xDeviceStatusAuthResult OBJECT-TYPE
|
|
SYNTAX ALADot1xAuthenticationResult
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The State of the port."
|
|
::= { alaDot1xDeviceStatusEntry 12 }
|
|
|
|
alaDot1xDeviceStatusMacLearntState OBJECT-TYPE
|
|
SYNTAX ALADot1xMacLearntState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The State of the MAC classified in the switch."
|
|
::= { alaDot1xDeviceStatusEntry 13 }
|
|
|
|
alaDot1xDeviceStatusTimeLearned OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time that the MAC address is learned in the system."
|
|
::= { alaDot1xDeviceStatusEntry 14 }
|
|
|
|
alaDot1xDeviceStatusCaptivePortalUsed OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates if the device is classified in the system using
|
|
Captive Portal. A value of True means that the device has used Captive Portal
|
|
to authenticate its credential and a value of False means that the device
|
|
has not used Captive Portal to authenticate its credential."
|
|
::= { alaDot1xDeviceStatusEntry 15 }
|
|
|
|
|
|
alaDot1xAdminLogoutParams OBJECT IDENTIFIER ::= { alaIND1Dot1XMIBObjects 9 }
|
|
|
|
--
|
|
-- ala Dot1x Admin Logout Parameters group
|
|
--
|
|
|
|
alaDot1xAdminLogoutType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noOperation (0),
|
|
macAddress (1),
|
|
username (2),
|
|
networkProfileName (3),
|
|
interfaceId (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this variable is set, the switch is to logout the user based on the
|
|
logout type. The associated MIB object should be correctly set
|
|
based on the logout type. If the corresponding MIB object that contain the
|
|
criteria is not set correctly the switch will not be able to perform the
|
|
logout operation. After the logout operation is done, the switch will set
|
|
the corresponding criteria to back to its default value. Also when the
|
|
logout operation is done, the switch is to set this variable back to zero (0)."
|
|
::= { alaDot1xAdminLogoutParams 1}
|
|
|
|
alaDot1xAdminLogoutMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is used only if alaDot1xAdminLogoutType is set to MAC address.
|
|
The default value is set to ff:ff:ff:ff:ff:ff. This well know broadcast MAC
|
|
address will not be learned by the switch. The switch will reset this to the
|
|
default value after the logout operation is performed"
|
|
::= { alaDot1xAdminLogoutParams 2}
|
|
|
|
alaDot1xAdminLogoutUserName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is used only if alaDot1xAdminLogoutType is set to username.
|
|
The default is a NULL string. The switch will reset this to the default value
|
|
after the logout operation is performed. User is not allowed to set the value
|
|
to NULL."
|
|
::= { alaDot1xAdminLogoutParams 3}
|
|
|
|
alaDot1xAdminLogoutNetworkProfileName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is used only if alaDot1xAdminLogoutType is set to networkprofilename.
|
|
The default is a NULL string. The switch will reset this to the default value
|
|
after the logout operation is performed. User is not allowed to set the value
|
|
to NULL."
|
|
::= { alaDot1xAdminLogoutParams 4}
|
|
|
|
alaDot1xAdminLogoutInterfaceId OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is used only if alaDot1xAdminLogoutType is set to interfaceId.
|
|
The default value is zero (0). The switch will reset this to the default value
|
|
after the logout operation is performed."
|
|
::= { alaDot1xAdminLogoutParams 5}
|
|
|
|
alaDot1xAuthServerTimeout OBJECT IDENTIFIER ::= { alaIND1Dot1XMIBObjects 10 }
|
|
|
|
alaDot1xAuthSvrTimeoutPolicy OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..127))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Block -> B
|
|
User Network Profile -> 'user network profile name'
|
|
|
|
Default value is B."
|
|
::= { alaDot1xAuthServerTimeout 1 }
|
|
|
|
alaDot1xAuthSvrTimeoutReAuthPeriod OBJECT-TYPE
|
|
SYNTAX Integer32 (30..9999)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the time interval in second that the supplicant is to be
|
|
classified according to the Auth Server Down Policy
|
|
(alaDot1xAuthServerTimeoutPolicy). When this time is expired,
|
|
the supplicant will be prompted to re-authenticate and see if
|
|
the Auth Server is back up. The default value is 30 seconds."
|
|
::= { alaDot1xAuthServerTimeout 2 }
|
|
|
|
alaDot1xAuthSvrTimeoutStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is object is to enable or disable the use of alaDot1xAuthSvrTimeoutPolicy and
|
|
alaDot1xAuthSvrTimeoutReAuthPeriod. Default is disabled."
|
|
DEFVAL { disabled }
|
|
::= { alaDot1xAuthServerTimeout 3 }
|
|
|
|
----------------------------------------------------------
|
|
---------- Passthrough Mode Status Table -----------------
|
|
----------------------------------------------------------
|
|
|
|
AlaPassThroughStatus ::= TEXTUAL-CONVENTION
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
" Admin status"
|
|
SYNTAX INTEGER { enabled(1),
|
|
disabled(2)
|
|
}
|
|
|
|
alaPassthroughConfig OBJECT IDENTIFIER ::= { alaIND1Dot1XMIBObjects 11 }
|
|
|
|
alaDot1xPassthroughStatus OBJECT-TYPE
|
|
SYNTAX AlaPassThroughStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Passthrough of 802.1x packets.
|
|
Force the 802.1x packet to flood in the VLAN."
|
|
::= { alaPassthroughConfig 1 }
|
|
|
|
alaAvlanPassthroughStatus OBJECT-TYPE
|
|
SYNTAX AlaPassThroughStatus
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Passthrough of AVLAN packets.
|
|
Force the AVLAN packet to flood in the VLAN."
|
|
::= { alaPassthroughConfig 2 }
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
-- COMPLIANCE
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
alaIND1Dot1XMIBCompliances MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance statement for Alcatel 802.1x."
|
|
MODULE
|
|
MANDATORY-GROUPS
|
|
{
|
|
alaINDDot1XPortGroup,
|
|
alaDot1xPortLookupGroup,
|
|
alaINDDot1XPolicyGroup,
|
|
alaINDDot1XDeviceStatusGroup,
|
|
alaDot1xAuthSvrTimeoutGroup
|
|
}
|
|
|
|
::= { alaIND1Dot1XMIBConformance 2 }
|
|
|
|
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
-- UNITS OF CONFORMANCE
|
|
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
|
|
|
alaINDDot1XPortGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaDot1xPortSlotNumber,
|
|
alaDot1xPortPortNumber,
|
|
alaDot1xPortMACAddress,
|
|
alaDot1xPortVlan,
|
|
alaDot1xPortProtocol,
|
|
alaDot1xPortUserName,
|
|
alaDot1xPortState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of 802.1x objects for port status."
|
|
::= { alaIND1Dot1XMIBGroups 1 }
|
|
|
|
|
|
alaDot1xPortLookupGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaDot1xPortLookupSlotNumber,
|
|
alaDot1xPortLookupPortNumber,
|
|
alaDot1xPortLookupMACAddress,
|
|
alaDot1xPortLookupInterfaceNumber
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of 802.1x objects for port lookup."
|
|
::= { alaIND1Dot1XMIBGroups 2 }
|
|
|
|
alaINDDot1XPolicyGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaDot1xNonSuppPolicy,
|
|
alaDot1xSuppPolicy,
|
|
alaDot1xPollingCnt,
|
|
alaDot1xCaptivePortalPolicy,
|
|
alaDot1xCPortalSessionLimit,
|
|
alaDot1xCPortalRetryCnt
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of 802.1x objects for supplicant and non-supplicant policies."
|
|
::= { alaIND1Dot1XMIBGroups 3 }
|
|
|
|
|
|
alaINDDot1XDeviceStatusGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaDot1xDeviceStatusVlan,
|
|
alaDot1xDeviceStatusIPAddress,
|
|
alaDot1xDeviceStatusUserName,
|
|
alaDot1xDeviceStatusProfileUsed,
|
|
alaDot1xDeviceStatusAuthType,
|
|
alaDot1xDeviceStatusPolicyUsed,
|
|
alaDot1xDeviceStatusAuthResult,
|
|
alaDot1xDeviceStatusMacLearntState,
|
|
alaDot1xDeviceStatusTimeLearned,
|
|
alaDot1xDeviceStatusCaptivePortalUsed
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of 802.1x objects for the status of the devices on an 802.1X enable port."
|
|
::= { alaIND1Dot1XMIBGroups 4 }
|
|
|
|
alaDot1xAuthSvrTimeoutGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaDot1xAuthSvrTimeoutPolicy,
|
|
alaDot1xAuthSvrTimeoutReAuthPeriod,
|
|
alaDot1xAuthSvrTimeoutStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of 802.1x objects for the Authentication Server Timeout."
|
|
::= { alaIND1Dot1XMIBGroups 5 }
|
|
|
|
alaPassthroughConfigGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
alaDot1xPassthroughStatus,
|
|
alaAvlanPassthroughStatus
|
|
}
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
" Status of passthrough for 802.1x and avlan configuration in devices."
|
|
::= { alaIND1Dot1XMIBGroups 6 }
|
|
|
|
END
|
|
|