mibs/MIBS/nokia/ALCATEL-IND1-IPM-VLAN-MIB
2023-12-05 12:25:34 +01:00

440 lines
14 KiB
Plaintext
Raw Permalink Blame History

ALCATEL-IND1-IPM-VLAN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-IDENTITY,
OBJECT-TYPE FROM SNMPv2-SMI
OBJECT-GROUP,
MODULE-COMPLIANCE FROM SNMPv2-CONF
softentIND1IPMVlanMgt FROM ALCATEL-IND1-BASE
RowStatus FROM SNMPv2-TC
InterfaceIndex FROM IF-MIB
InetAddressType,
InetAddress,
InetAddressPrefixLength FROM INET-ADDRESS-MIB
;
alcatelIND1IPMVlanMIB MODULE-IDENTITY
LAST-UPDATED "200707020000Z"
ORGANIZATION "ALCATEL - Architects Of An Internet World"
CONTACT-INFO
"Please consult with Customer Service to insure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"The parameters for configuration of the IPM Vlan feature,
including the association between ports and ipaddresses with vlans.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright <20> 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
::= { softentIND1IPMVlanMgt 1}
alcatelIND1IPMVlanMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For IPM Vlan Managed Objects."
::= { alcatelIND1IPMVlanMIB 1 }
alcatelIND1IPMVlanMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For IPM Vlan Conformance Information."
::= { alcatelIND1IPMVlanMIB 2 }
alcatelIND1IPMVlanMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For IPM Vlan Units Of Conformance."
::= { alcatelIND1IPMVlanMIBConformance 1 }
alcatelIND1IPMVlanMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For IPM Vlan Compliance Statements."
::= { alcatelIND1IPMVlanMIBConformance 2 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- The IPM Vlan Port Table
alaipmvVlanPort OBJECT IDENTIFIER ::= { alcatelIND1IPMVlanMIBObjects 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaipmvVlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIpmvVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains port specific information for the IP
Multicast VLAN. An entry is this table is created when a port
is configured as a receiver / sender port for a IPMVLAN."
::= { alaipmvVlanPort 1 }
alaipmvVlanPortEntry OBJECT-TYPE
SYNTAX AlaIpmvVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A IPMV Port entry."
INDEX { alaipmvVlanPortIPMVlanNumber, alaipmvVlanPortNumber, alaipmvVlanPortType}
::= { alaipmvVlanPortTable 1 }
AlaIpmvVlanPortEntry ::= SEQUENCE
{
alaipmvVlanPortIPMVlanNumber INTEGER,
alaipmvVlanPortNumber InterfaceIndex,
alaipmvVlanPortType INTEGER,
alaipmvVlanPortRowStatus RowStatus
}
alaipmvVlanPortIPMVlanNumber OBJECT-TYPE
SYNTAX INTEGER (2..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN number component of this IPMVLAN instance. Valid range
from 2 to 4094."
::= { alaipmvVlanPortEntry 1 }
alaipmvVlanPortNumber OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port ifindex of the port which is associated to the IPMVLAN."
::= { alaipmvVlanPortEntry 2 }
alaipmvVlanPortType OBJECT-TYPE
SYNTAX INTEGER
{
receiverPort(1),
senderPort(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of this port associated to the IPMVLAN. receiverPort(1)
is the receiver port associated to the IPMVLAN, senderPort(2) is
the sender port associated to the IPMVLAN. In the VLAN Stacking
environment, these ports are the VLAN Stacking ports.
Configuration of IPMVLAN logical/physical receiver port on
multiple IPMVlans, that are associated with same IPv4/IPv6
multicast group addresses are not allowed."
::= { alaipmvVlanPortEntry 3 }
alaipmvVlanPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry. The values supported are CreateAndGo(4)
and destroy(6), to create or delete the port as a receiver / sender port
in an IPMVLAN. Of course the corresponding vlan and port must exist."
::= { alaipmvVlanPortEntry 4 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- The IPM Vlan ipmvlan/ipaddress association Table
alaipmvVlanIpAddr OBJECT IDENTIFIER ::= { alcatelIND1IPMVlanMIBObjects 2 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaipmvVlanIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIpmvVlanIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IP addresses assigned to an IPMVLAN."
::= { alaipmvVlanIpAddr 1 }
alaipmvVlanIpAddrEntry OBJECT-TYPE
SYNTAX AlaIpmvVlanIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A IPMVLAN IP address entry."
INDEX { alaipmvVlanIpAddrVlanNumber, alaipmvVlanIpAddrType ,alaipmvVlanIpAddress}
::= { alaipmvVlanIpAddrTable 1 }
AlaIpmvVlanIpAddrEntry ::= SEQUENCE
{
alaipmvVlanIpAddrVlanNumber INTEGER,
alaipmvVlanIpAddrType InetAddressType,
alaipmvVlanIpAddress InetAddress,
alaipmvVlanIpAddrRowStatus RowStatus
}
alaipmvVlanIpAddrVlanNumber OBJECT-TYPE
SYNTAX INTEGER (2..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN number component of this IPMVLAN instance. Valid range from 2 to 4094."
::= { alaipmvVlanIpAddrEntry 1 }
alaipmvVlanIpAddrType OBJECT-TYPE
SYNTAX InetAddressType (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type."
::= { alaipmvVlanIpAddrEntry 2 }
alaipmvVlanIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Multicast IP address based on the address type.
This IP multicast group address can be associated to multiple IPMVLANs.
Configuration of IPv4/IPv6 Multicast Group address on multiple IPMVlans,
that are associated with same physical/logical receiver ports are not allowed."
::= { alaipmvVlanIpAddrEntry 3 }
alaipmvVlanIpAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is used to create or delete the Multicast IP address in an IPMVLAN.
Of course the corresponding vlan must exist."
::= { alaipmvVlanIpAddrEntry 4 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- The IPM Vlan ipmvlan/ctag association Table
alaipmvVlanCtagT OBJECT IDENTIFIER ::= { alcatelIND1IPMVlanMIBObjects 3 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaipmvVlanCtagTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIpmvVlanCtagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A table that contains ipmvlan-ctag association for the IPMV feature."
::= { alaipmvVlanCtagT 1 }
alaipmvVlanCtagEntry OBJECT-TYPE
SYNTAX AlaIpmvVlanCtagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A IPMVLAN-Ctag entry."
INDEX { alaipmvVlanNumber, alaipmvVlanCtag}
::= { alaipmvVlanCtagTable 1 }
AlaIpmvVlanCtagEntry ::= SEQUENCE {
alaipmvVlanNumber INTEGER,
alaipmvVlanCtag INTEGER,
alaipmvVlanCtagRowStatus RowStatus
}
alaipmvVlanNumber OBJECT-TYPE
SYNTAX INTEGER (2..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN number component of this IPMVLAN instance. Valid range from 2 to 4094."
::= { alaipmvVlanCtagEntry 1 }
alaipmvVlanCtag OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The customer vlan id associated to the IPMVLAN.
This customer vlan id is unique and can't be associated
to more than one IPM Vlan"
::= { alaipmvVlanCtagEntry 2 }
alaipmvVlanCtagRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove an IPMVLAN-ctag association."
::= { alaipmvVlanCtagEntry 3 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- The IPM Vlan ipaddress/prefixlen association Table
alaipmvVlanIpAddrMask OBJECT IDENTIFIER ::= { alcatelIND1IPMVlanMIBObjects 4 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaipmvVlanIpAddrMaskTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIpmvVlanIpAddrMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IP addresses assigned to an IPMVLAN."
::= { alaipmvVlanIpAddr 2 }
alaipmvVlanIpAddrMaskEntry OBJECT-TYPE
SYNTAX AlaIpmvVlanIpAddrMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A IPMVLAN IP address entry."
INDEX { alaipmvVlanIpAddrMaskVlanNumber, alaipmvVlanIpAddrMaskType ,alaipmvVlanIpAddrMaskAddress, alaipmvVlanIpAddrMaskPrefixLen}
::= { alaipmvVlanIpAddrMaskTable 1 }
AlaIpmvVlanIpAddrMaskEntry ::= SEQUENCE {
alaipmvVlanIpAddrMaskVlanNumber INTEGER,
alaipmvVlanIpAddrMaskType InetAddressType,
alaipmvVlanIpAddrMaskAddress InetAddress,
alaipmvVlanIpAddrMaskPrefixLen InetAddressPrefixLength,
alaipmvVlanIpAddrMaskRowStatus RowStatus
}
alaipmvVlanIpAddrMaskVlanNumber OBJECT-TYPE
SYNTAX INTEGER (2..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN number component of this IPMVLAN instance. Valid range from 2 to 4094."
::= { alaipmvVlanIpAddrMaskEntry 1 }
alaipmvVlanIpAddrMaskType OBJECT-TYPE
SYNTAX InetAddressType (1..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address type.The allowed values are ipv4(1) and ipv6(2)."
::= { alaipmvVlanIpAddrMaskEntry 2 }
alaipmvVlanIpAddrMaskAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (4 | 16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Multicast IP address based on the address type indicated by alaipmvVlanIpAddrMaskType. This IP multicast group address can be associated to multiple IPMVLANs. alaipmvVlanIpAddrMaskPrefixLen is used to specify a mask. The host bits of the address should be zero."
::= { alaipmvVlanIpAddrMaskEntry 3 }
alaipmvVlanIpAddrMaskPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Multicast IP address-mask length based on the address type. It must be 0-32 for alaipmvVlanIpAddrMaskType ipv4 and 128 for alaipmvVlanIpAddrMaskType ipv6. The host bits of the address alaipmvVlanIpAddrMaskAddress should be zero."
::= { alaipmvVlanIpAddrMaskEntry 4 }
alaipmvVlanIpAddrMaskRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is used to create or delete the Multicast IP address in an IPMVLAN. Of course the corresponding vlan must exist."
::= { alaipmvVlanIpAddrMaskEntry 5 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- COMPLIANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1IPMVlanMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for IPM Vlan."
MODULE MANDATORY-GROUPS
{
alaipmvlanPortGroup,
alaipmvlanIPAddressGroup,
alaipmvlanIPAddrMaskGroup,
alaipmvlanCtagGroup
}
::= { alcatelIND1IPMVlanMIBCompliances 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- UNITS OF CONFORMANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaipmvlanPortGroup OBJECT-GROUP
OBJECTS
{
alaipmvVlanPortIPMVlanNumber, -- The IPMVLAN Port Table
alaipmvVlanPortNumber,
alaipmvVlanPortType,
alaipmvVlanPortRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of IPM Vlan Ports."
::= { alcatelIND1IPMVlanMIBGroups 1 }
alaipmvlanIPAddressGroup OBJECT-GROUP
OBJECTS
{
alaipmvVlanIpAddrVlanNumber, -- The IPM Vlan IP Address Table
alaipmvVlanIpAddrType,
alaipmvVlanIpAddress,
alaipmvVlanIpAddrRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of IPM Vlan Address."
::= { alcatelIND1IPMVlanMIBGroups 2 }
alaipmvlanCtagGroup OBJECT-GROUP
OBJECTS
{
alaipmvVlanNumber, -- The IPM Vlan Ctag Table
alaipmvVlanCtag,
alaipmvVlanCtagRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of IPM Vlan Address."
::= { alcatelIND1IPMVlanMIBGroups 3 }
alaipmvlanIPAddrMaskGroup OBJECT-GROUP
OBJECTS
{
alaipmvVlanIpAddrMaskRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of IPM Vlan Address."
::= { alcatelIND1IPMVlanMIBGroups 4 }
END