david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/nokia/ALCATEL-IND1-LAG-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

2081 lines
60 KiB
Plaintext
Raw Permalink Blame History

ALCATEL-IND1-LAG-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, Integer32, Counter32, TimeTicks
FROM SNMPv2-SMI
DisplayString, MacAddress, TEXTUAL-CONVENTION, RowStatus
FROM SNMPv2-TC
NOTIFICATION-TYPE FROM SNMPv2-SMI
NOTIFICATION-GROUP FROM SNMPv2-CONF
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
InterfaceIndex
FROM IF-MIB
PortList
FROM Q-BRIDGE-MIB
LacpKey,LacpState,ChurnState
FROM IEEE8023-LAG-MIB
lnkaggTraps,
softentIND1LnkAgg
FROM ALCATEL-IND1-BASE
;
alcatelIND1LAGMIB MODULE-IDENTITY
LAST-UPDATED "200704030000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
The Link Aggregation module for managing ALCATEL FALCON product
This MIB is an image of the 802.3ad standard.
The aim of this proprietary MIB is to allow the creation of
aggregate objects with their size.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
::= { softentIND1LnkAgg 1 }
alcatelIND1LAGMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1LAGMIB 1 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
-- - Local Declares
LacpType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The object supports or not (Omnichannel) the LACP protocol ."
SYNTAX INTEGER {
lacpOff(0),
lacpOn(1)
}
-- -------------------------------------------------------------
-- -------------------------------------------------------------
-- groups in the LAG MIB
-- -------------------------------------------------------------
alclnkaggAgg OBJECT IDENTIFIER ::= { alcatelIND1LAGMIBObjects 1 }
alclnkaggAggPort OBJECT IDENTIFIER ::= { alcatelIND1LAGMIBObjects 2 }
-- -------------------------------------------------------------
-- -------------------------------------------------------------
-- The Tables Last Changed Object
-- -------------------------------------------------------------
alclnkaggTablesLastChanged OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time of the
most recent change to the alclnkaggAggTable,
alclnkaggAggPortListTable, or
alclnkaggAggPortTable."
::= { alcatelIND1LAGMIBObjects 3 }
-- -------------------------------------------------------------
-- The Aggregator Configuration Table
-- -------------------------------------------------------------
alclnkaggAggTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlclnkaggAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about every
Aggregator that is associated with this System.
To create specify alclnkaggAggIndex,alclnkaggAggSize
and alclnkaggAggLacpType. "
REFERENCE
"IEEE 802.3 Subclause 30.7.1"
::= { alclnkaggAgg 1 }
alclnkaggAggEntry OBJECT-TYPE
SYNTAX AlclnkaggAggEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the Aggregator parameters. This is indexed
by the ifIndex of the Aggregator."
INDEX { alclnkaggAggIndex }
::= { alclnkaggAggTable 1 }
AlclnkaggAggEntry ::=
SEQUENCE {
alclnkaggAggIndex
InterfaceIndex,
alclnkaggAggMACAddress
MacAddress,
alclnkaggAggActorSystemPriority
INTEGER,
alclnkaggAggActorSystemID
MacAddress,
alclnkaggAggPartnerAdminKey
LacpKey,
alclnkaggAggActorAdminKey
LacpKey,
alclnkaggAggActorOperKey
LacpKey,
alclnkaggAggPartnerSystemID
MacAddress,
alclnkaggAggPartnerSystemPriority
INTEGER,
alclnkaggAggPartnerOperKey
LacpKey,
--------------------------------
-- Specific Proprietary Part
------------------------------
alclnkaggAggSize
INTEGER,
alclnkaggAggNumber
INTEGER,
alclnkaggAggDescr
DisplayString,
alclnkaggAggName
DisplayString,
alclnkaggAggLacpType
LacpType,
alclnkaggAggAdminState
-- Adminstate,
INTEGER,
alclnkaggAggOperState
INTEGER,
alclnkaggAggNbrSelectedPorts
INTEGER,
alclnkaggAggNbrAttachedPorts
INTEGER,
alclnkaggAggPrimaryPortIndex
InterfaceIndex,
alclnkaggAggPrimaryPortPosition
INTEGER,
alclnkaggAggRowStatus
RowStatus,
alclnkaggAggPreemptState
INTEGER,
alclnkaggAggPreemptValue
Integer32
}
alclnkaggAggIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique identifier allocated to this Aggregator by the local
System.
This attribute identifies an Aggregator instance among the subordinate
managed objects of the containing object. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.1"
::= { alclnkaggAggEntry 1 }
alclnkaggAggMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6-octet read-only value carrying the individual
MAC address assigned to the Aggregator."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.9"
::= { alclnkaggAggEntry 2 }
alclnkaggAggActorSystemPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A 2-octet read-create value indicating the priority value
associated with the Actor's System ID."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.5"
::= { alclnkaggAggEntry 3 }
alclnkaggAggActorSystemID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A 6-octet read-create MAC address value used as a unique
identifier for the System that contains this Aggregator.
NOTE-From the perspective of the Link Aggregation mechanisms
described in Clause , only a single combination of
Actor's System ID and System Priority are considered, and no
distinction is made between the values of these parameters
for an Aggregator and the port(s) that are associated with
it; i.e., the protocol is described in terms of the operation
of aggregation within a single System. However, the managed.
objects provided for the Aggregator and the port both allow
management of these parameters. The result of this is to
permit a single piece of equipment to be configured by
management to contain more than one System from the point of
view of the operation of Link Aggregation. This may be of
particular use in the configuration of equipment that has
limited aggregation capability (see )."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.4"
::= { alclnkaggAggEntry 4 }
alclnkaggAggPartnerAdminKey OBJECT-TYPE
SYNTAX LacpKey
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The current Administrative value of the Key accepted for the
Aggregator's current protocol Partner. Optional this is
a 16-bit read-create value. If the aggregation is manually
configured, this Key value will be a value assigned by the
local System. The administrative Key value may differ from
the operational "
REFERENCE
" specific to ALCATEL "
::= { alclnkaggAggEntry 5 }
alclnkaggAggActorAdminKey OBJECT-TYPE
SYNTAX LacpKey
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The current administrative value of the Key for the Aggregator.
The administrative Key value may differ from the operational
Key value for the reasons discussed in . This is a 16-bit,
read-create value. The meaning of particular Key values
is of local significance."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.7"
::= { alclnkaggAggEntry 6 }
alclnkaggAggActorOperKey OBJECT-TYPE
SYNTAX LacpKey
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational value of the Key for the Aggregator.
The administrative Key value may differ from the operational
Key value for the reasons discussed in .
This is a 16-bit read-only value. The meaning of particular Key
values is of local significance."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.8"
::= { alclnkaggAggEntry 7 }
alclnkaggAggPartnerSystemID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A 6-octet read-create MAC address value consisting
of the unique identifier for the current protocol Partner of
this Aggregator. A value of zero indicates that there is no
known Partner. If the aggregation is manually configured, this
System ID value will be a value assigned by the local System."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.10"
::= { alclnkaggAggEntry 8 }
alclnkaggAggPartnerSystemPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A 2-octet read-create value that indicates the priority
value associated with the Partner's System ID. If the
aggregation is manually configured, this System Priority value
will be a value assigned by the local System."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.11"
::= { alclnkaggAggEntry 9 }
alclnkaggAggPartnerOperKey OBJECT-TYPE
SYNTAX LacpKey
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The current operational value of the Key for the
Aggregator's current protocol Partner. This is
a 16-bit read-create value. If the aggregation is manually
configured, this Key value will be a value assigned by the
local System."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.12"
::= { alclnkaggAggEntry 10 }
------------------------------------------------------------
-- Specific Proprietary Part
-----------------------------------------------------------
alclnkaggAggSize OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum number of links that could be attached to this
aggregator, This nominator is mandatory and is a required
field in order to create a row in this table"
REFERENCE
"specific to ALCATEL"
::= { alclnkaggAggEntry 11 }
alclnkaggAggNumber OBJECT-TYPE
SYNTAX INTEGER(0..127)
-- MAX-ACCESS read-create
MAX-ACCESS read-only
STATUS current
DESCRIPTION
-- "Aggreagtor number to assign a reference number at the creation of
-- an aggregator mandatory for the Omnichhannel object creation"
"Aggreagtor number reference the aggregate dedicated from the
ifindex at the creation"
REFERENCE
" specific to ALCATEL"
::= { alclnkaggAggEntry 12 }
-- alclnkaggAggDescr is equivalent to ifDescr in ifTable
alclnkaggAggDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description is a human readable string which describes of
the type of aggregator object OMNICHANNEL / LACP etc <20> "
REFERENCE
" IEEE 802.3 Subclause 30.7.1.1.2"
::= { alclnkaggAggEntry 13 }
-- alclnkaggAggDescr is equivalent to ifDescr in ifXTable
alclnkaggAggName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of the aggregator is human readable string manually given by
the operator"
REFERENCE
" IEEE 802.3 Subclause 30.7.1.1.3"
::= { alclnkaggAggEntry 14 }
alclnkaggAggLacpType OBJECT-TYPE
SYNTAX LacpType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Aggreagtor set with LACP protocol or not (case of Omnichannel)
mandatory at the creation of the aggregator, cannot be modified
later "
REFERENCE
" specific to ALCATEL"
::= { alclnkaggAggEntry 15 }
-- alclnkaggAggAdminState is equivalent to ifAdminStatus in ifTable
alclnkaggAggAdminState OBJECT-TYPE
-- SYNTAX AdminState
SYNTAX INTEGER {
enable(1), -- ready to pass packets
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"status assigned by the admnistrator. The activation of the aggregator
is managed by this nominator"
REFERENCE
" IEEE 802.3 Subclause 30.7.1.1.13"
::= { alclnkaggAggEntry 16 }
-- alclnkaggAggOperState is similar to ifOperStatus in ifTable but the nominator
-- does not take exactly the same values.
alclnkaggAggOperState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
logicPortCreatFailed(3),
qReservationFailed(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational status of the aggregator with proprietary values
operational state from iftable corresponds to UP state "
REFERENCE
" IEEE 802.3 Subclause 30.7.1.1.14"
::= { alclnkaggAggEntry 17 }
alclnkaggAggNbrSelectedPorts OBJECT-TYPE
SYNTAX INTEGER (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ports selected at the momemt ."
REFERENCE
"Specific to ALCATEL"
::= { alclnkaggAggEntry 18 }
alclnkaggAggNbrAttachedPorts OBJECT-TYPE
SYNTAX INTEGER (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ports attached at the momemt ."
REFERENCE
"Specific to ALCATEL"
::= { alclnkaggAggEntry 19 }
alclnkaggAggPrimaryPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the ifindex of the primary port in the aggregator used to send
BPDUs and flooding frames Zeo indicates no primary port is
available ."
REFERENCE
"Specific to ALCATEL"
::= { alclnkaggAggEntry 20 }
alclnkaggAggPrimaryPortPosition OBJECT-TYPE
SYNTAX INTEGER (-1..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the port index number in the aggregator used to send
BPDUs and flooding frames ."
REFERENCE
"Specific to ALCATEL"
::= { alclnkaggAggEntry 21 }
alclnkaggAggRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is the RowStatus (locking flag) for creating or
deleting aggregator objects. alclnkaggAggSize, alclnkaggAggLacpType
and must be supplied in the request to create a row, it is a
required field."
REFERENCE
" specific to ALCATEL "
::= { alclnkaggAggEntry 22 }
alclnkaggAggPreemptState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This sets the pre-emption state for an aggregate. The default value is disable."
REFERENCE
"specific to ALCATEL"
::={ alclnkaggAggEntry 23}
alclnkaggAggPreemptValue OBJECT-TYPE
SYNTAX Integer32 (30..300)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This sets the pre-empt timer value in seconds for an aggregate. The default value is 30 seconds."
REFERENCE
"specific to ALCATEL"
::={ alclnkaggAggEntry 24}
-- -------------------------------------------------------------
-- The Aggregation Port List Table
-- -------------------------------------------------------------
alclnkaggAggPortListTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlclnkaggAggPortListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains a list of all the ports
associated with each Aggregator."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.31"
::= { alclnkaggAgg 2 }
alclnkaggAggPortListEntry OBJECT-TYPE
SYNTAX AlclnkaggAggPortListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the ports associated with a given Aggregator.
This is indexed by the ifIndex of the Aggregator."
INDEX { alclnkaggAggIndex }
::= { alclnkaggAggPortListTable 1 }
AlclnkaggAggPortListEntry ::=
SEQUENCE {
alclnkaggAggPortListPorts
PortList
}
alclnkaggAggPortListPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The complete set of ports currently associated with
this Aggregator. Each bit set in this list represents
an Actor Port member of this Link Aggregation."
REFERENCE
"IEEE 802.3 Subclause 30.7.1.1.31"
::= { alclnkaggAggPortListEntry 1 }
-- -------------------------------------------------------------
-- The Aggregation Port Table
-- -------------------------------------------------------------
alclnkaggAggPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlclnkaggAggPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains Link Aggregation Control
configuration information about every
Aggregation Port associated with this device.
A row appears in this table for each physical port."
REFERENCE
"IEEE 802.3 Subclause 30.7.2"
::= { alclnkaggAggPort 1 }
alclnkaggAggPortEntry OBJECT-TYPE
SYNTAX AlclnkaggAggPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Link Aggregation Control configuration
parameters for each Aggregation Port on this device."
INDEX { alclnkaggAggPortIndex }
::= { alclnkaggAggPortTable 1 }
AlclnkaggAggPortEntry ::=
SEQUENCE {
alclnkaggAggPortIndex
InterfaceIndex,
alclnkaggAggPortActorSystemPriority
INTEGER,
alclnkaggAggPortActorSystemID
MacAddress,
alclnkaggAggPortActorAdminKey
LacpKey,
alclnkaggAggPortActorOperKey
LacpKey,
alclnkaggAggPortPartnerAdminSystemPriority
INTEGER,
alclnkaggAggPortPartnerOperSystemPriority
INTEGER,
alclnkaggAggPortPartnerAdminSystemID
MacAddress,
alclnkaggAggPortPartnerOperSystemID
MacAddress,
alclnkaggAggPortPartnerAdminKey
LacpKey,
alclnkaggAggPortPartnerOperKey
LacpKey,
alclnkaggAggPortSelectedAggID
InterfaceIndex,
alclnkaggAggPortAttachedAggID
InterfaceIndex,
alclnkaggAggPortActorPort
INTEGER,
alclnkaggAggPortActorPortPriority
INTEGER,
alclnkaggAggPortPartnerAdminPort
INTEGER,
alclnkaggAggPortPartnerOperPort
INTEGER,
alclnkaggAggPortPartnerAdminPortPriority
INTEGER,
alclnkaggAggPortPartnerOperPortPriority
INTEGER,
alclnkaggAggPortActorAdminState
LacpState,
alclnkaggAggPortActorOperState
LacpState,
alclnkaggAggPortPartnerAdminState
LacpState,
alclnkaggAggPortPartnerOperState
LacpState,
------------------------------------------------------------
-- Specific Proprietary Part
-----------------------------------------------------------
alclnkaggAggPortSelectedAggNumber
INTEGER,
alclnkaggAggPortGlobalPortNumber
INTEGER,
alclnkaggAggPortAdminState
-- AdminState,
INTEGER,
alclnkaggAggPortOperState
-- OperState,
INTEGER,
alclnkaggAggPortState
INTEGER,
alclnkaggAggPortLinkState
INTEGER,
alclnkaggAggPortPrimary
INTEGER,
alclnkaggAggPortLacpType
LacpType,
alclnkaggAggPortRowStatus
RowStatus,
alclnkaggAggPortStandbyState
INTEGER
}
alclnkaggAggPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of the port"
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.1"
::= { alclnkaggAggPortEntry 1 }
alclnkaggAggPortActorSystemPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A 2-octet read-create value used to define the priority
value associated with the Actor's System ID."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.2"
::= { alclnkaggAggPortEntry 2 }
alclnkaggAggPortActorSystemID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A 6-octet read-create MAC address value that defines
the value of the System ID for the System that contains this
Aggregation Port."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.3"
::= { alclnkaggAggPortEntry 3 }
alclnkaggAggPortActorAdminKey OBJECT-TYPE
SYNTAX LacpKey
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-create value.
The meaning of particular Key values is of local significance."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.4"
::= { alclnkaggAggPortEntry 4 }
alclnkaggAggPortActorOperKey OBJECT-TYPE
SYNTAX LacpKey
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local significance."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.5"
::= { alclnkaggAggPortEntry 5 }
alclnkaggAggPortPartnerAdminSystemPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A 2-octet read-create value used to define the administrative
value of priority associated with the Partner's System ID. The
assigned value is used, along with the value of
aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey,
aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority,
in order to achieve manually configured aggregation."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.6"
::= { alclnkaggAggPortEntry 6 }
alclnkaggAggPortPartnerOperSystemPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 2-octet read-only value indicating the operational value
of priority associated with the Partner's System ID. The
value of this attribute may contain the manually configured value
carried in aAggPortPartnerAdminSystemPriority
if there is no protocol Partner."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.7"
::= { alclnkaggAggPortEntry 7 }
alclnkaggAggPortPartnerAdminSystemID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A 6-octet read-create MACAddress value representing
the administrative value of the Aggregation Port's protocol
Partner's System ID. The assigned value is used, along with
the value of aAggPortPartnerAdminSystemPriority,
aAggPortPartnerAdminKey, aAggPortPartnerAdminPort,
and aAggPortPartnerAdminPortPriority, in order to
achieve manually configured aggregation."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.8"
::= { alclnkaggAggPortEntry 8 }
alclnkaggAggPortPartnerOperSystemID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 6-octet read-only MACAddress value representing
the current value of the Aggregation Port's protocol Partner's
System ID. A value of zero indicates that there is no known
protocol Partner. The value of this attribute may contain the
manually configured value carried in
aAggPortPartnerAdminSystemID if there is no protocol Partner."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.9"
::= { alclnkaggAggPortEntry 9 }
alclnkaggAggPortPartnerAdminKey OBJECT-TYPE
SYNTAX LacpKey
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The current administrative value of the Key for the
protocol Partner. This is a 16-bit read-create value.
The assigned value is used, along with the value of
aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID,
aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority,
in order to achieve manually configured aggregation."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.10"
::= { alclnkaggAggPortEntry 10 }
alclnkaggAggPortPartnerOperKey OBJECT-TYPE
SYNTAX LacpKey
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational value of the Key for the
protocol Partner. The value of this attribute may contain
the manually configured value carried in
aAggPortPartnerAdminKey if there is no protocol Partner.
This is a 16-bit read-only value."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.11"
::= { alclnkaggAggPortEntry 11 }
alclnkaggAggPortSelectedAggID OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier value of the Aggregator that this Aggregation
Port has currently selected. Zero indicates that the Aggregation
Port has not selected an Aggregator, either because it is in the
process of detaching from an Aggregator or because there is no
suitable Aggregator available for it to select. This value is
read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.12"
::= { alclnkaggAggPortEntry 12 }
alclnkaggAggPortAttachedAggID OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier value of the Aggregator that this Aggregation
Port is currently attached to. Zero indicates that the Aggregation
Port is not currently attached to an Aggregator. This value is
read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.13"
::= { alclnkaggAggPortEntry 13 }
alclnkaggAggPortActorPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number locally assigned to the Aggregation Port.
The port number is communicated in LACPDUs as the
Actor_Port. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.14"
::= { alclnkaggAggPortEntry 14 }
alclnkaggAggPortActorPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority value assigned to this Aggregation Port.
This 16-bit value is read-create."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.15"
::= { alclnkaggAggPortEntry 15 }
alclnkaggAggPortPartnerAdminPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The current administrative value of the port number
for the protocol Partner. This is a 16-bit read-create value.
The assigned value is used, along with the value of
aAggPortPartnerAdminSystemPriority,
aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey,
and aAggPortPartnerAdminPortPriority,
in order to achieve manually configured aggregation."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.16"
::= { alclnkaggAggPortEntry 16 }
alclnkaggAggPortPartnerOperPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational port number assigned to this Aggregation
Port by the Aggregation Port's protocol Partner. The value
of this attribute may contain the manually configured value
carried in aAggPortPartnerAdminPort if there is no protocol
Partner. This 16-bit value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.17"
::= { alclnkaggAggPortEntry 17 }
alclnkaggAggPortPartnerAdminPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The current administrative value of the port priority
for the protocol Partner. This is a 16-bit read-create value.
The assigned value is used, along with the value of
aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID,
aAggPortPartnerAdminKey, and aAggPortPartnerAdminPort,
in order to achieve manually configured aggregation."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.18"
::= { alclnkaggAggPortEntry 18 }
alclnkaggAggPortPartnerOperPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority value assigned to this Aggregation Port
by the Partner. The value of this attribute may contain the
manually configured value carried in
aAggPortPartnerAdminPortPriority if there is no
protocol Partner. This 16-bit value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.19"
::= { alclnkaggAggPortEntry 19 }
alclnkaggAggPortActorAdminState OBJECT-TYPE
SYNTAX LacpState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of 8 bits, corresponding to the administrative values
of Actor_State () as transmitted by the Actor in LACPDUs.
The first bit corresponds to bit 0 of Actor_State (LACP_Activity),
the second bit corresponds to bit 1 (LACP_Timeout), the third bit
corresponds to bit 2 (Aggregation), the fourth bit corresponds to
bit 3 (Synchronization), the fifth bit corresponds to bit 4
(Collecting), the sixth bit corresponds to bit 5 (Distributing),
the seventh bit corresponds to bit 6 (Defaulted), and the eighth
bit corresponds to bit 7 (Expired). These values allow
administrative control over the values of LACP_Activity,
LACP_Timeout and Aggregation. This attribute value is read-create."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.20"
::= { alclnkaggAggPortEntry 20 }
alclnkaggAggPortActorOperState OBJECT-TYPE
SYNTAX LacpState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of 8 bits, corresponding to the current
operational values of Actor_State as transmitted by the
Actor in LACPDUs. The bit allocations are as defined in
. This attribute value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.21"
::= { alclnkaggAggPortEntry 21 }
alclnkaggAggPortPartnerAdminState OBJECT-TYPE
SYNTAX LacpState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of 8 bits, corresponding to the current administrative
value of Actor_State for the protocol Partner. The bit
allocations are as defined in . This attribute value is
read-create. The assigned value is used in order to achieve
manually configured aggregation."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.22"
::= { alclnkaggAggPortEntry 22 }
alclnkaggAggPortPartnerOperState OBJECT-TYPE
SYNTAX LacpState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of 8 bits, corresponding to the current values of
Actor_State in the most recently received LACPDU transmitted
by the protocol Partner. The bit allocations are as defined in
. In the absence of an active protocol Partner, this
value may reflect the manually configured value
aAggPortPartnerAdminState. This attribute value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.23"
::= { alclnkaggAggPortEntry 23 }
------------------------------------------------------------
-- Specific Proprietary Part
-----------------------------------------------------------
alclnkaggAggPortSelectedAggNumber OBJECT-TYPE
SYNTAX INTEGER(-1..127)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Aggreagtor number to attach a port at its creation
mandatory and only used for the
Omnichhannel not allowed for LACP
(-1) value displayed when it is not significant"
REFERENCE
" specific to ALCATEL"
::= { alclnkaggAggPortEntry 24 }
alclnkaggAggPortGlobalPortNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Physical reference of the port "
REFERENCE
" specific to ALCATEL"
::= { alclnkaggAggPortEntry 25 }
-- alclnkaggAggPortAdminState is equivalent to ifAdminStatus in ifTable
alclnkaggAggPortAdminState OBJECT-TYPE
SYNTAX INTEGER {
enable(1), -- ready to pass packets
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"status assigned by the admnistrator. port activation done by iftable
this nominator is equivalent to ifAdminStatus in ifTable "
REFERENCE
" IEEE 802.3 Subclause 30.7.1.1.13"
::= { alclnkaggAggPortEntry 26 }
alclnkaggAggPortOperState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
notAttached(3),
notAggregable(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational status of the port regarding the traffic"
REFERENCE
" specific to ALCATEL"
::= { alclnkaggAggPortEntry 27 }
alclnkaggAggPortState OBJECT-TYPE
SYNTAX INTEGER {
created(1),
configurable(2),
configured(3),
selected(4),
reserved(5),
attached(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"aggregation status of the port"
REFERENCE
" specific to ALCATEL"
::= { alclnkaggAggPortEntry 28 }
alclnkaggAggPortLinkState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational status of the link"
REFERENCE
" specific to ALCATEL"
::= { alclnkaggAggPortEntry 29 }
-- alclnkaggAggPortLinkState is equivalent to ifOperStatus
alclnkaggAggPortPrimary OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2),
notSignificant(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"port primary or not"
REFERENCE
" specific to ALCATEL"
::= { alclnkaggAggPortEntry 30 }
alclnkaggAggPortLacpType OBJECT-TYPE
SYNTAX LacpType
MAX-ACCESS read-create
-- STATUS mandatory
STATUS current
DESCRIPTION
"Port set with LACP protocol or not (case of Omnichannel)
mandatory at the creation of the port"
REFERENCE
" specific to ALCATEL"
::= { alclnkaggAggPortEntry 31 }
alclnkaggAggPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is the RowStatus (locking flag) for creating or
deleting aggregatable port objects. alclnkaggAggPortActorAdminKey
and alclnkaggAggPortSlotSlice must be supplied
in the request to create a row, it is a required field."
REFERENCE
" specific to ALCATEL "
::= { alclnkaggAggPortEntry 32 }
alclnkaggAggPortStandbyState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This sets the standby state for a port. The default value is disable."
::= { alclnkaggAggPortEntry 33 }
-- -------------------------------------------------------------
-- LACP Statistics Table
-- -------------------------------------------------------------
alclnkaggAggPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlclnkaggAggPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains Link Aggregation information
about every port that is associated with this device.
A row appears in this table for each physical port."
REFERENCE
"IEEE 802.3 Subclause 30.7.3"
::= { alclnkaggAggPort 2 }
alclnkaggAggPortStatsEntry OBJECT-TYPE
SYNTAX AlclnkaggAggPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Link Aggregation Control Protocol statistics
for each port on this device."
INDEX { alclnkaggAggPortIndex }
::= { alclnkaggAggPortStatsTable 1 }
AlclnkaggAggPortStatsEntry ::=
SEQUENCE {
alclnkaggAggPortStatsLACPDUsRx
Counter32,
alclnkaggAggPortStatsMarkerPDUsRx
Counter32,
alclnkaggAggPortStatsMarkerResponsePDUsRx
Counter32,
alclnkaggAggPortStatsUnknownRx
Counter32,
alclnkaggAggPortStatsIllegalRx
Counter32,
alclnkaggAggPortStatsLACPDUsTx
Counter32,
alclnkaggAggPortStatsMarkerPDUsTx
Counter32,
alclnkaggAggPortStatsMarkerResponsePDUsTx
Counter32
}
alclnkaggAggPortStatsLACPDUsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid LACPDUs received on this
Aggregation Port. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.3.1.2"
::= { alclnkaggAggPortStatsEntry 1 }
alclnkaggAggPortStatsMarkerPDUsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid Marker PDUs received on this
Aggregation Port. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.3.1.3"
::= { alclnkaggAggPortStatsEntry 2 }
alclnkaggAggPortStatsMarkerResponsePDUsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid Marker Response PDUs received on this
Aggregation Port. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.3.1.4"
::= { alclnkaggAggPortStatsEntry 3 }
alclnkaggAggPortStatsUnknownRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received that either:
- carry the Slow Protocols Ethernet Type value (),
but contain an unknown PDU, or:
- are addressed to the Slow Protocols group MAC
Address (), but do not carry the Slow Protocols Ethernet Type.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.3.1.5"
::= { alclnkaggAggPortStatsEntry 4 }
alclnkaggAggPortStatsIllegalRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received that carry the Slow
Protocols Ethernet Type value (), but contain a badly formed
PDU or an illegal value of Protocol Subtype ().
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.3.1.6"
::= { alclnkaggAggPortStatsEntry 5 }
alclnkaggAggPortStatsLACPDUsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LACPDUs transmitted on this
Aggregation Port. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.3.1.7"
::= { alclnkaggAggPortStatsEntry 6 }
alclnkaggAggPortStatsMarkerPDUsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Marker PDUs transmitted on this
Aggregation Port. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.3.1.8"
::= { alclnkaggAggPortStatsEntry 7 }
alclnkaggAggPortStatsMarkerResponsePDUsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Marker Response PDUs transmitted
on this Aggregation Port. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.3.1.9"
::= { alclnkaggAggPortStatsEntry 8 }
-- -------------------------------------------------------------
-- LACP Debug Table
-- -------------------------------------------------------------
alclnkaggAggPortDebugTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlclnkaggAggPortDebugEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains Link Aggregation debug
information about every port that is associated with
this device. A row appears in this table for each
physical port."
REFERENCE
"IEEE 802.3 Subclause 30.7.4"
::= { alclnkaggAggPort 3 }
alclnkaggAggPortDebugEntry OBJECT-TYPE
SYNTAX AlclnkaggAggPortDebugEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the debug parameters for a port."
INDEX { alclnkaggAggPortIndex }
::= { alclnkaggAggPortDebugTable 1 }
AlclnkaggAggPortDebugEntry ::=
SEQUENCE {
alclnkaggAggPortDebugRxState
INTEGER,
alclnkaggAggPortDebugLastRxTime
TimeTicks,
alclnkaggAggPortDebugMuxState
INTEGER,
alclnkaggAggPortDebugMuxReason
DisplayString,
alclnkaggAggPortDebugActorChurnState
ChurnState,
alclnkaggAggPortDebugPartnerChurnState
ChurnState,
alclnkaggAggPortDebugActorChurnCount
Counter32,
alclnkaggAggPortDebugPartnerChurnCount
Counter32,
alclnkaggAggPortDebugActorSyncTransitionCount
Counter32,
alclnkaggAggPortDebugPartnerSyncTransitionCount
Counter32,
alclnkaggAggPortDebugActorChangeCount
Counter32,
alclnkaggAggPortDebugPartnerChangeCount
Counter32
}
alclnkaggAggPortDebugRxState OBJECT-TYPE
SYNTAX INTEGER {
current(1),
expired(2),
defaulted(3),
initialize(4),
lacpDisabled(5),
portDisabled(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute holds the value 'current' if the Receive
state machine for the Aggregation Port is in the
CURRENT state, 'expired' if the Receive state machine.
is in the EXPIRED state, 'defaulted' if the Receive state
machine is in the DEFAULTED state, 'initialize' if the
Receive state machine is in the INITIALIZE state,
'lacpDisabled' if the Receive state machine is in the
LACP_DISABLED state, or 'portDisabled' if the Receive
state machine is in the PORT_DISABLED state.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.2"
::= { alclnkaggAggPortDebugEntry 1 }
alclnkaggAggPortDebugLastRxTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of aTimeSinceSystemReset (F.2.1) when
the last LACPDU was received by this Aggregation Port.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.3"
::= { alclnkaggAggPortDebugEntry 2 }
alclnkaggAggPortDebugMuxState OBJECT-TYPE
SYNTAX INTEGER {
detached(1),
waiting(2),
attached(3),
collecting(4),
distributing(5),
collectingDistributing(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute holds the value `detached' if the Mux
state machine (43.4.14) for the Aggregation Port is in
the DETACHED state, `waiting' if the Mux state machine
is in the WAITING state, `attached' if the Mux state
machine for the Aggregation Port is in the ATTACHED
state, `collecting' if the Mux state machine for the
Aggregation Port is in the COLLECTING state,
`distributing' if the Mux state machine for the
Aggregation Port is in the DISTRIBUTING state, and
`collectingDistributing' if the Mux state machine for
the Aggregation Port is in the COLLECTING_DISTRIBUTING
state. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.4"
::= { alclnkaggAggPortDebugEntry 3 }
alclnkaggAggPortDebugMuxReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A human-readable text string indicating the reason
for the most recent change of Mux machine state.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.5"
::= { alclnkaggAggPortDebugEntry 4 }
alclnkaggAggPortDebugActorChurnState OBJECT-TYPE
SYNTAX ChurnState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the Actor Churn Detection machine
() for the Aggregation Port. A value of 'noChurn'
indicates that the state machine is in either the
NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR
state, and 'churn' indicates that the state machine is in the
ACTOR_CHURN state. This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.6"
::= { alclnkaggAggPortDebugEntry 5 }
alclnkaggAggPortDebugPartnerChurnState OBJECT-TYPE
SYNTAX ChurnState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the Partner Churn Detection machine
() for the Aggregation Port. A value of 'noChurn'
indicates that the state machine is in either the
NO_PARTNER_CHURN or the PARTNER_CHURN_MONITOR
state, and 'churn' indicates that the state machine is
in the PARTNER_CHURN state.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.7"
::= { alclnkaggAggPortDebugEntry 6 }
alclnkaggAggPortDebugActorChurnCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of times the Actor Churn state
machine has entered the ACTOR_CHURN state.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.8"
::= { alclnkaggAggPortDebugEntry 7 }
alclnkaggAggPortDebugPartnerChurnCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of times the Partner Churn
state machine has entered the PARTNER_CHURN state.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.9"
::= { alclnkaggAggPortDebugEntry 8 }
alclnkaggAggPortDebugActorSyncTransitionCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of times the Actor's Mux state
machine () has entered the IN_SYNC state.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.10"
::= { alclnkaggAggPortDebugEntry 9 }
alclnkaggAggPortDebugPartnerSyncTransitionCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of times the Partner's Mux
state machine () has entered the IN_SYNC state.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.11"
::= { alclnkaggAggPortDebugEntry 10 }
alclnkaggAggPortDebugActorChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of times the Actor's perception of
the LAG ID for this Aggregation Port has changed.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.12"
::= { alclnkaggAggPortDebugEntry 11 }
alclnkaggAggPortDebugPartnerChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of times the Partner's perception of
the LAG ID (see ) for this Aggregation Port has changed.
This value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.4.1.13"
::= { alclnkaggAggPortDebugEntry 12 }
-- -------------------------------------------------------------
-- Link Aggregation additional parameters
-- -------------------------------------------------------------
alclnkaggAggEniActivate OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"This variable activates or deactivates link aggregation for ENI"
::= { alclnkaggAgg 3 }
alclnkaggSlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlclnkaggSlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row in this table represents the link aggregation status
for the associated slot. "
REFERENCE
"specific to Alcatel"
::= { alclnkaggAgg 4 }
alclnkaggSlotEntry OBJECT-TYPE
SYNTAX AlclnkaggSlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration parameters for link aggregation."
INDEX { alclnkaggSlotNum }
::= { alclnkaggSlotTable 1 }
AlclnkaggSlotEntry ::=
SEQUENCE {
alclnkaggSlotNum
INTEGER,
alclnkaggSlotStatus
INTEGER,
alclnkaggMultipleAggPerSlot
INTEGER
}
alclnkaggSlotNum OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The slot number."
REFERENCE
"specific to Alcatel"
::= { alclnkaggSlotEntry 1 }
alclnkaggSlotStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Link aggregation enable/disable"
::= { alclnkaggSlotEntry 2 }
alclnkaggMultipleAggPerSlot OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable multiple Link aggregation per slot"
::= { alclnkaggSlotEntry 3 }
----------------------------------------------------------------
-- Table for mapping LAG Id to the ifIndex of this aggregate
---------------------------------------------------------------
alclnkaggAggIdIfIndexTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlclnkaggAggIdIfIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row in this table represents the link aggregation
aggregate id's corresponding ifIndex. "
REFERENCE
"specific to Alcatel"
::= { alclnkaggAgg 5 }
alclnkaggAggIdIfIndexEntry OBJECT-TYPE
SYNTAX AlclnkaggAggIdIfIndexEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Parameters for link aggregation aggregate id relationship to ifIndex."
INDEX { alclnkaggIfIndex }
::= { alclnkaggAggIdIfIndexTable 1 }
AlclnkaggAggIdIfIndexEntry ::=
SEQUENCE {
alclnkaggIfIndex
INTEGER,
alclnkaggAggId
INTEGER
}
alclnkaggIfIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IfIndex for the given Aggregate ID"
::= { alclnkaggAggIdIfIndexEntry 1 }
alclnkaggAggId OBJECT-TYPE
SYNTAX INTEGER (0..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aggregate id number."
REFERENCE
"specific to Alcatel"
::= { alclnkaggAggIdIfIndexEntry 2 }
-- -------------------------------------------------------------
-- IEEE 802.3ad MIB - Conformance Information
-- -------------------------------------------------------------
alcatelIND1LAGMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Link Aggregation Subsystem Conformance Information."
::= { alcatelIND1LAGMIB 2 }
alcatelIND1LAGMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Link Aggregation Subsystem Units Of Conformance."
::= { alcatelIND1LAGMIBConformance 1 }
alcatelIND1LAGMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For Link Aggregation Subsystem Compliance Statements."
::= { alcatelIND1LAGMIBConformance 2 }
-- -------------------------------------------------------------
-- units of conformance
-- -------------------------------------------------------------
alclnkaggAggGroup OBJECT-GROUP
OBJECTS {
alclnkaggAggActorSystemID,
alclnkaggAggActorSystemPriority,
alclnkaggAggActorAdminKey,
alclnkaggAggMACAddress,
alclnkaggAggActorOperKey,
alclnkaggAggPartnerSystemID,
alclnkaggAggPartnerSystemPriority,
alclnkaggAggPartnerOperKey,
--------------------------------
-- Specific Proprietary Part
------------------------------
alclnkaggAggSize,
alclnkaggAggNumber,
alclnkaggAggDescr,
alclnkaggAggName,
alclnkaggAggLacpType,
alclnkaggAggAdminState,
alclnkaggAggOperState,
alclnkaggAggNbrSelectedPorts,
alclnkaggAggNbrAttachedPorts,
alclnkaggAggPrimaryPortIndex,
alclnkaggAggPrimaryPortPosition,
alclnkaggAggPreemptState,
alclnkaggAggPreemptValue
}
STATUS current
DESCRIPTION
"A collection of objects providing information about an
aggregation."
::= { alcatelIND1LAGMIBGroups 1 }
alclnkaggAggPortListGroup OBJECT-GROUP
OBJECTS {
alclnkaggAggPortListPorts
}
STATUS current
DESCRIPTION
"A collection of objects providing information about every
port in an aggregation."
::= { alcatelIND1LAGMIBGroups 2 }
alclnkaggAggPortGroup OBJECT-GROUP
OBJECTS {
alclnkaggAggPortActorSystemPriority,
alclnkaggAggPortActorSystemID,
alclnkaggAggPortActorAdminKey,
alclnkaggAggPortActorOperKey,
alclnkaggAggPortPartnerAdminSystemPriority,
alclnkaggAggPortPartnerOperSystemPriority,
alclnkaggAggPortPartnerAdminSystemID,
alclnkaggAggPortPartnerOperSystemID,
alclnkaggAggPortPartnerAdminKey,
alclnkaggAggPortPartnerOperKey,
alclnkaggAggPortSelectedAggID,
alclnkaggAggPortAttachedAggID,
alclnkaggAggPortActorPort,
alclnkaggAggPortActorPortPriority,
alclnkaggAggPortPartnerAdminPort,
alclnkaggAggPortPartnerOperPort,
alclnkaggAggPortPartnerAdminPortPriority,
alclnkaggAggPortPartnerOperPortPriority,
alclnkaggAggPortActorAdminState,
alclnkaggAggPortActorOperState,
alclnkaggAggPortPartnerAdminState,
alclnkaggAggPortPartnerOperState,
alclnkaggAggPortSelectedAggNumber,
alclnkaggAggPortGlobalPortNumber,
alclnkaggAggPortAdminState,
alclnkaggAggPortOperState,
alclnkaggAggPortState,
alclnkaggAggPortLinkState,
alclnkaggAggPortPrimary,
alclnkaggAggPortLacpType,
alclnkaggAggPortStandbyState
}
STATUS current
DESCRIPTION
"A collection of objects providing information about every
port in an aggregation."
::= { alcatelIND1LAGMIBGroups 3 }
alclnkaggAggPortStatsGroup OBJECT-GROUP
OBJECTS {
alclnkaggAggPortStatsLACPDUsRx,
alclnkaggAggPortStatsMarkerPDUsRx,
alclnkaggAggPortStatsMarkerResponsePDUsRx,
alclnkaggAggPortStatsUnknownRx,
alclnkaggAggPortStatsIllegalRx,
alclnkaggAggPortStatsLACPDUsTx,
alclnkaggAggPortStatsMarkerPDUsTx,
alclnkaggAggPortStatsMarkerResponsePDUsTx
}
STATUS current
DESCRIPTION
"A collection of objects providing information about every
port in an aggregation."
::= { alcatelIND1LAGMIBGroups 4 }
alclnkaggAggPortDebugGroup OBJECT-GROUP
OBJECTS {
alclnkaggAggPortDebugRxState,
alclnkaggAggPortDebugLastRxTime,
alclnkaggAggPortDebugActorChurnState,
alclnkaggAggPortDebugPartnerChurnState,
alclnkaggAggPortDebugActorChurnCount,
alclnkaggAggPortDebugPartnerChurnCount,
alclnkaggAggPortDebugActorSyncTransitionCount,
alclnkaggAggPortDebugPartnerSyncTransitionCount,
alclnkaggAggPortDebugActorChangeCount,
alclnkaggAggPortDebugPartnerChangeCount
}
STATUS current
DESCRIPTION
"A collection of objects providing debug information about.
every aggregated port."
::= { alcatelIND1LAGMIBGroups 5 }
alclnkaggTablesLastChangedGroup OBJECT-GROUP
OBJECTS {
alclnkaggTablesLastChanged
}
STATUS current
DESCRIPTION
"A collection of objects providing information about the time
of changes to the configuration of aggregations and their ports."
::= { alclnkaggAggGroup 6 }
-- -------------------------------------------------------------
-- compliance statements
-- -------------------------------------------------------------
alclnkaggAggCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for device support of
Link Aggregation."
MODULE
MANDATORY-GROUPS {
alclnkaggAggGroup,
alclnkaggAggPortGroup,
alclnkaggTablesLastChangedGroup,
lnkaggNotificationVarsGroup
}
GROUP alclnkaggAggPortListGroup
DESCRIPTION
"This group is optional."
GROUP alclnkaggAggPortStatsGroup
DESCRIPTION
"This group is optional."
GROUP alclnkaggAggPortDebugGroup
DESCRIPTION
"This group is optional."
::= { alcatelIND1LAGMIBCompliances 1 }
lnkaggNotificationVarsGroup OBJECT-GROUP
OBJECTS
{
traplnkaggAggId,
traplnkaggPortIfIndex
}
STATUS current
DESCRIPTION
"Collection of objects which appear only in notifications."
::= {alcatelIND1LAGMIBGroups 7 }
lnkaggTrapsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
lnkaggAggUp,
lnkaggAggDown,
lnkaggPortJoin,
lnkaggPortLeave,
lnkaggPortRemove,
lnkaggPortReserve
}
STATUS current
DESCRIPTION
"Collection of Traps for Link Aggregation ."
::= { alcatelIND1LAGMIBGroups 8 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
lnkaggNotificationVars OBJECT IDENTIFIER ::= { alcatelIND1LAGMIBObjects 4 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
traplnkaggAggId OBJECT-TYPE
SYNTAX INTEGER (0..32)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Index Value of Link Aggregation group ."
::= {lnkaggNotificationVars 1 }
traplnkaggPortIfIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Port of Link Aggregate group ."
::= {lnkaggNotificationVars 2 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- NOTIFICATIONS
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
lnkaggAggUp NOTIFICATION-TYPE
OBJECTS {
traplnkaggAggId,
traplnkaggPortIfIndex
}
STATUS current
DESCRIPTION
"The Link Aggregation is active .
This trap is sent when any one port of the link aggregation
goes to attached state."
::= { lnkaggTraps 0 1 }
lnkaggAggDown NOTIFICATION-TYPE
OBJECTS {
traplnkaggAggId,
traplnkaggPortIfIndex
}
STATUS current
DESCRIPTION
"The Link Aggregation is not active .
This trap is sent when all ports of the link aggregation
goes out of attached state."
::= { lnkaggTraps 0 2 }
lnkaggPortJoin NOTIFICATION-TYPE
OBJECTS {
traplnkaggAggId,
traplnkaggPortIfIndex
}
STATUS current
DESCRIPTION
"The Link Aggregation port joins the aggregate .
This trap is sent when given port of the link aggregation
goes to attached state."
::= { lnkaggTraps 0 3 }
lnkaggPortLeave NOTIFICATION-TYPE
OBJECTS {
traplnkaggAggId,
traplnkaggPortIfIndex
}
STATUS current
DESCRIPTION
"The Link Aggregation port leaves the aggregate .
This trap is sent when given port of the link aggregation
goes out of attached state."
::= { lnkaggTraps 0 4 }
lnkaggPortRemove NOTIFICATION-TYPE
OBJECTS {
traplnkaggAggId,
traplnkaggPortIfIndex
}
STATUS current
DESCRIPTION
"The Link Aggregation port removed from the aggregate .
This trap is sent when given port of the link aggregation
removed due to invalid configuration ."
::= { lnkaggTraps 0 5 }
lnkaggPortReserve NOTIFICATION-TYPE
OBJECTS {
traplnkaggAggId,
traplnkaggPortIfIndex
}
STATUS current
DESCRIPTION
"The Link Aggregation port is reserved for this aggregate .
This trap is sent when given port of the link aggregation
goes to reserved state."
::= { lnkaggTraps 0 6 }
END
Reference in New Issue View Git Blame Copy Permalink