david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
main
mibs/MIBS/nokia/SFP-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

6139 lines
225 KiB
Plaintext
Raw Permalink Blame History

-- SFP-MIB
-- ======================================================================
-- This specification is published by Alcatel-Lucent under Non-Disclosure
-- Agreement(s) (NDA) with specific parties and has to be considered as
-- Confidential Information as defined in such NDA.
-- Alcatel-Lucent reserves the right to revise this document for any reason,
-- including but not limited to conformity with standards promulgated by
-- various agencies, utilisation of advances in the state of the technical
-- areas, or the reflection of changes in the design of any equipment,
-- techniques, or procedures described or referred to herein.
-- The product specifications and other technical or performance information
-- contained herein are subject to change without notice.
-- Updates of this document will be issued under the above NDA's.
-- Alcatel-Lucent makes no representation or warranty, expressed or implied, with
-- respect to the sufficiency, accuracy, or utility of any information or
-- opinion contained herein. Alcatel-Lucent expressly advises that any use of for
-- any purpose or reliance upon this technical reference is at the risk of
-- the user and that Alcatel-Lucent will not be liable for any damage or injury
-- incurred by any person arising out of the sufficiency, accuracy, or
-- utility of any information or opinion contained herein.
-- This document is not to be construed as a suggestion to any manufacturer
-- to modify or change any of its products, nor does this document represent
-- any commitment by Alcatel-Lucent to sell or purchase any product.
-- Nothing contained herein will be construed as conferring by implication,
-- estoppel, or otherwise any license or right under any patent, whether or
-- not the use of any information herein necessarily employs an invention of
-- any existing or later issued patent.
-- Alcatel-Lucent reserves the right not to offer any or all of these products and
-- to withdraw any or all of them at any future time.
-- Copyright (C) 2005-2009, Alcatel-Lucent. All Rights Reserved.
-- ===========================================================================
-- MODULE-IDENTITY
-- LAST-UPDATED ""20120213260000Z""
-- ORGANIZATION "Alcatel"
-- CONTACT-INFO
--
-- "Email: asam.mibsupport@alcatel-lucent.be"
--
-- REVISION "20170307"
-- DESCRIPTION
-- Editor : hao.d.lu@alcatel-sbell.com.cn
-- Changes:
-- Update sfpInvSpecificalType with 1 new type:
-- cPlusPlusI(66)
--
-- REVISION "20161104"
-- DESCRIPTION
-- Editor : hao.d.lu@alcatel-sbell.com.cn
-- Changes:
-- Update sfpInvSpecificalType with 2 new types:
-- base1000-ZR-CWDM(57),
-- base10G-ZR(58)
--
-- REVISION "20151110"
-- DESCRIPTION
-- Editor : qiong.k.wu@alcatel-sbell.com.cn
-- Changes:
-- SfpDiagTable,SfpInventoryTable and SfpRSSIProfileTable are updated
-- for CFP4 introduced with FANT-G."
--
-- REVISION "20120620"
-- DESCRIPTION
-- "Version: 3FE25209EAAA_V4.4.0.3.1
-- Editor : vanapatla ramana
-- Changes:
-- Alcatel notes updated for Atttributes dsx1SfpGenConfigTributary1,
-- dsx1SfpGenConfigTributary2,dsx1FramerAlarmStatus and
-- dsx1SfpClkAlarmState as Not Supported."
--
-- REVISION "20120607"
-- DESCRIPTION
-- "Version: 3FE25209EAAA_V4.4.0.3.0
-- Editor : vanapatla ramana
-- Changes:
-- Added SGMIII loop back support and corrected the range of GenConfigMarket."
--
-- REVISION "20120525"
-- DESCRIPTION
-- "Version: 3FE25209EAAA_V4.4.0.2.8
-- Editor : vanapatla ramana
-- Changes:
-- Added ALCATEL NOTES."
--
-- REVISION "20120524"
-- DESCRIPTION
-- "Version: 3FE25209EAAA_V4.4.0.2.5
-- Editor : vanapatla ramana
-- Reason for change: ALU01794407
-- Range of supported values for dsx1SfpLIUTxConfig is changed from 0-11
-- changed to 1-12 "
--
-- REVISION "20120213"
-- DESCRIPTION
-- "Version: 3FE25209EAAA_V4.4.0.2.0
-- Editor : vanapatla ramana
-- Reason for change: ALU01279245, ALU01750853 :
-- Augmented tables dsx1GeneralConfigTable, dsx1PWTDMinterfaceTable
-- from dsx1ClockConfigTable.Augmented tables dsx1FramerTable,
-- dsx1LineInterfaceunitTable from dsx1PWTDMConfigTable. Fields "
--
-- DESCRIPTION
-- "The SFP MIB contains twelve tables:
-- 1. The host SFP configuration table
-- 2. The host SFP configuration extension table
-- 3. The host SFP status table.
-- 4. The expansion shelf SFP status table.
-- 5. The SFP diagnostics table.
-- 6. The SFP Inventory Table.
-- 7. The dsx1 General Configuration Table.
-- 8. The dsx1 Clock Configuration Table.
-- 9. The dsx1 Line Interface Unit Table.
-- 10. The dsx1 Framer Table.
-- 11. The dsx1 pseudo wire configuration Table.
-- 12. The dsx1 pseudo wire protocol Table.
-- 13. The dsx1 pseudo wire TDM interface Table."
--
-- REVISION "20120108"
-- REVISION "20120108"
-- DESCRIPTION
-- "Version: 3FE25209EAAA_V4.4.0.2.0
-- Editor : Janakiraman/Vanapatla Ramana
-- Reason for change: "ALU01279245 : Management Integration of 2xE1/DS1- SFP in ISAM"
-- Introduced dsx1GeneralConfigTable, dsx1ClockConfigTable,
-- dsx1LineInterfaceunitTable, dsx1FramerTable, dsx1PWTDMConfigTable,
-- dsx1PWprotocolEngineTable and dsx1PWTDMinterfaceTable for 2xE1/DS1 SFP"
-- DESCRIPTION
-- "Version: 3FE25209EAAA_V4.0.0.1.1
-- Editor : Marita Saveyn
-- Reason for change: ALU01336169 :
-- expSfpType, bit 16 (65536): 2500BASE-SX
-- expSfpType, bit 17 (131072): 2500BASE-LX"
-- expSfpType, bit 18 (262144): 2500BASE-BX"
--
-- REVISION "20110208"
-- DESCRIPTION
-- "Version: To be updated
-- Editor : Deepak Rajaram/Gurusamy Dharmaraj
-- Reason for change: weblib comments for 3HH-01154-DDAA-PBZZA"
--
-- REVISION "20110131"
-- DESCRIPTION
-- "Version: To be updated
-- Editor : Deepak Rajaram/Gurusamy Dharmaraj
-- Reason for change: ALU00122060/ALU00123022 :
-- Introduced sfpInventoryTable and updated
-- new parameters in sfpDiagTable"
--
-- REVISION "20101004"
-- DESCRIPTION
-- "Version: 3FE25209EAAA_V4.0.0.0.5
-- Editor : Marita Saveyn
-- Reason for change: ALU00805501 :
-- hostSfpType, bit 18 (262144): 2500BASE-BX"
--
-- REVISION "20100426"
-- DESCRIPTION
-- "Version: 3FE25209EAAA_V4.0.0.0.4
-- Editor : Marita Saveyn
-- Reason for change: ALU00303338 :
-- hostSfpType, bit 16 (65536): 2500BASE-SX
-- hostSfpType, bit 17 (131072): 2500BASE-LX"
--
-- REVISION "20100331"
-- DESCRIPTION
-- "Version: 3FE25209EAAA_V4.0.0.0.3
-- Editor : Marita Saveyn
-- Reason for change: correct type 2500GBASE into 2500BASE."
--
-- REVISION "20091214"
-- DESCRIPTION
-- "Version: 3FE25209EAAA_V4.0.0.0.2
-- Editor : Marita Saveyn
-- Reason for change: add sfp type 2500GBASE."
--
-- REVISION "20090414"
-- DESCRIPTION
-- "Version: 3FE25209EAAA_V4.0.0.0.0
-- Editor : Bakri Aboukarr
-- Reason for change: support newer SFP types."
--
-- REVISION "20080923"
-- DESCRIPTION
-- "Version: 3FE25209EAAA_V3.7.1.1.0
-- Editor : Tom Van Peteghem
-- Reason for change:
-- update for IHUB mib changes."
--
-- REVISION "20080606"
-- DESCRIPTION
-- "Version: 3FE25209EAAA_V3.7.0.0.0
-- Editor : Bakri Aboukarr
-- Reason for change: weblib comments made on 3HH-01154-CHAA-PBZZA.
-- Changes:
-- 1. Remove all smart quotes
-- 2. Change 0.00 mW to No Power."
--
-- REVISION "20071005"
-- DESCRIPTION
-- "Version: 3FE25209EAAA_V3.6.0.0.1
-- Editor : Larry Boone
-- Reason for change: weblib comments made on 3HH-01154-CGAA-PBZZA.
-- Changes:
-- 1. Revise the DESCRIPTION text for the 'Invalid' display string,
-- to match the wording in MIB versions for prior releases.
-- 2. Change the DESCRIPTION text for sfpDiagSfpFaceplateNumber - cages
-- numbered zero on the faceplate are indexed using
-- sfpDiagSfpFaceplateNumber = 0."
--
-- REVISION "20070930"
-- DESCRIPTION
-- "Version: 3FE25209EAAA_V3.6.0.0.0
-- Editor : Larry Boone
-- Reason for change: ANTms33137, 'SFP Digital Diagnostics (2nd part)'.
-- Changes:
-- 1. Move SFP Diagnostics assembly and release details from the
-- sfpDiagTable ASN.1 DESCRIPTION fields to the non-ASN.1 text. That change
-- was requested in weblib comment 408170 (3HH-01154-CEAA-PBZZA), and was
-- agreed with Raf van Driessche 2-Jul-2007.
-- 2. Port the (minor) ASN.1 DESCRIPTION changes for ANTms59215 from
-- 3HH-01154-CEAA-PBZZA to this version. In summary, set the sfpDiagTxPower
-- and sfpDiagRxPower DisplayStrings to 'Invalid' if erroneous external
-- calibration constants yields a negative value, in milliWatts. Similarly,
-- set the sfpDiagTxBiasCurrent and sfpDiagSupplyVoltage DisplayStrings to
-- 'Invalid', rather than display negative values (in mA and VDC,
-- respectively).
-- 3. Undo name changes for hostSfpDownlinkStatus code points (e.g. change
-- devNotPresent back to sfpNotPresent), as requested by AMS."
--
--
-- REVISION "20070720"
-- DESCRIPTION
-- "Version: 3FE25209EAAA_V3.5.0.0.2
-- Editor : Larry Boone
-- Reason for change: ANTms02125, 'Remotes Aggregator' (ERAM-A).
-- Changes:
-- 1. Fix minor MIB syntax problems.
-- 2. Make the ALCATEL NOTE RANGE values for the
-- hostSfpCableToSlot and hostSfpCabledToSlot objects the same."
--
-- REVISION "20070713"
-- DESCRIPTION
-- "Version: 3FE25209EAAA_V3.5.0.0.1
-- Editor : Larry Boone
-- Reason for change: ANTms02125, 'Remotes Aggregator' (ERAM-A).
-- Changes:
-- 1. Add support for XFP Type (e.g. 10GBASE_LR) by increasing the range
-- of hostSfpType.
-- 2. Define a new numbering plan for XFP cages in hostSfpStatusTable.
-- 3. Revise the SFP-specific code point names in hostSfpDownlinkStatus
-- to make them applicable to XFPs as well.
-- 4. Correct the PERSIST value for hostStatusSfpFaceplateNumber."
-- REVISION "20070601"
-- DESCRIPTION
-- "Version: 3FE25209AAAA_V3.5.0.0.0
-- Editor: Bo Liu
-- Changes: updated for FDT591 - remote aggregator.
-- The sizes are extended for:
-- - hostSfpConfigTable
-- - hostSfpConfigExtTable
-- - hostSfpStatusTable
-- - expSfpStatusTable
-- - lanxPortNumber
-- The ranges of xxxSfpFaceplateNumbers are extended."
--
-- REVISION "20070516"
-- DESCRIPTION
-- "Version: 3FE25209AAAA_V3.4.0.0.3
-- Editor: Larry Boone
-- Changes: change the DESCRIPTION of the sfpDiagTemperature
-- DisplayString object - the format of the typical object
-- value is now '-128.00 degrees Celsius' (was '-128.00 C')."
--
-- REVISION "20070423"
-- DESCRIPTION
-- "Version: 3FE25209AAAA_V3.4.0.0.2
-- Editor: Larry Boone
-- Changes: correct the DESCRIPTION of the sfpDiagTxBiasCurrent
-- object - two decimal places of precision are required."
--
-- REVISION "20070420"
-- DESCRIPTION
-- "Version: 3FE25209AAAA_V3.4.0.0.1
-- Editor: Larry Boone
-- Changes:
-- a) Change the indexing of the two SFP cages of an FD-REM in the
-- sfpDiagTable (BDFhw64555) from
-- <FD-REM_LT_Slot#1, cage=1>,
-- <FD-REM_LT_Slot#2, cage=1>
-- to
-- <FD-REM_controllerCardSlot, cage=1>,
-- <FD-REM_controllerCardSlot, cage=2>.
-- Only DESCRIPTION fields are affected.
-- b) Delete swError from the sfpDiagAvailable enum. If a software error
-- occurs when retrieving SFP diagnostics, return the SNMP error code
-- 'genError' in the SNMP error-status field.
-- c) Rename the object sfpDiagCageNum to sfpDiagSfpFaceplateNumber, for
-- consistency with hostConfigSfpFaceplateNumber,
-- hostConfigExtSfpFaceplateNumber, and hostStatusSfpFaceplateNumber."
--
-- REVISION "20070308"
-- DESCRIPTION
-- "Version: 3FE25209AAAA_V3.4.0.0.0
-- Editor: Larry Boone
-- Changes: Added the sfpDiagTable (BDFhw64555)
-- Change the size of the hostSfpConfigTable (ANTms30627)"
--
-- REVISION "20061012"
-- DESCRIPTION
-- "Version: 3FE25209AAAA_E3.3.0.0
-- Editor: John Chuah
-- Changes: Added hostSfpCablingMismatch and
-- hostSfpCabledToPhysAddress to HostSfpStatusEntry.
-- Increased the maximum rack value from 6 to 7
-- and the maximum shelf value from 3 to 4."
--
-- REVISION "20060915"
-- DESCRIPTION
-- "Version: 3FE25467AAAA_V3.2.0.3.0
-- Editor: Zhu Jianhua
-- Changes:
-- update the ranges of hostStatusSfpFaceplateNumber,
-- hostSfpFaceplateNumber, hostConfigExtSfpFaceplateNumber,
-- hostConfigSfpFaceplateNumber for 7330FD
-- Added 0 to the ranges of rack, shelf and slot."
--
-- REVISION "20060505"
-- DESCRIPTION
-- "Version: 3FE25209AAAA_V3.2.0.0.0
-- Editor: Bo Liu, Marc Van Vlimmeren
-- Changes:
-- Added ALCATEL NOTES."
--
-- REVISION "20051121"
-- DESCRIPTION
-- "Version: 3FE25209AAAA_E3.0.0.0
-- Editor: Vairamuthu Karuppiah
-- Changes: Updated for equipment dimensioning changes to 6
-- racks and 4 shelves"
--
-- REVISION "20050815"
-- DESCRIPTION
-- "Version: 3FE25209AAAA_E2.3.1.3
-- Editor: Bo Liu
-- Changes: update the document based on CRs / comments in Weblib."
--
-- REVISION "20050614"
-- DESCRIPTION
-- "Version: 3FE25209AAAA_E2.3.1.2
-- Editor: Bo Liu
-- Changes: update after review (based on comments in Weblib)."
--
-- REVISION "20050513"
-- DESCRIPTION
-- "Version: 3FE25209AAAA_E2.3.1.1
-- Editor: Bo Liu
-- Changes: update after review (based on comments in Weblib)."
--
-- REVISION "20050509"
-- DESCRIPTION
-- "Version: 3FE25209AAAA_E2.3.1.0
-- Editor: Bo Liu
-- Changes: update after review (based on comments in Weblib)."
--
-- REVISION "20050502"
-- DESCRIPTION
-- "Version: 3FE25209AAAA_E2.3.0.1
-- Editor: Bo Liu
-- Changes: update after review (based on comments in Weblib)."
--
-- REVISION "20050421"
-- DESCRIPTION
-- "Version: 3FE25209AAAA_E2.3.0.0
-- Editor: Bo Liu
-- Changes: creation of the MIB"
-- ============================================================================
SFP-MIB DEFINITIONS ::= BEGIN
IMPORTS
Counter, TimeTicks
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
PhysAddress
FROM RFC1213-MIB
ifIndex
FROM ITF-MIB
AsamProfileIndex FROM ASAM-TC-MIB
AsamProfilePointer FROM ASAM-TC-MIB
AsamProfileName FROM ASAM-TC-MIB
AsamProfileRefCount FROM ASAM-TC-MIB
eqptSlotId,
EqptSlotIndex FROM ASAM-EQUIP-MIB
RowStatus
FROM SNMPv2-TC
DisplayString FROM SNMPv2-TC
MacAddress FROM BRIDGE-MIB
asam FROM SYSTEM-MIB;
-- type definitions
AsamNextProfileIndex ::= INTEGER(0..65535)
AsamMaxProfileIndex ::= INTEGER(0..65535)
SfpDiagTCAStatus ::= INTEGER
{
notAvailable(1),
normal(2),
exceededLowWarning(3),
exceededLowAlarm(4),
exceededHighWarning(5),
exceededHighAlarm(6)
}
-- TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION
-- "Diagonostics Threshold Crossing Alert status for temperature /
-- voltage / RX power / TX power / bias current, available in
-- SFP/SFP+/XFP EEPROM
-- Note : Two thresholds (warning and alarm level) are preset in
-- SFP/SFP+/XFP EEPROM during manufactor. Changing the threshold by
-- operator is not supprted
-- Possible values :
-- notAvailable : This value will be set when sfpDiagAvailable is set
-- other than noError, ie, retrieval of diagnostics is failed
-- Following values are applicable only when sfpDiagAvailable is
-- set to noError, ie, retrieval of diagnostics is success
-- normal : No threshold crossing, present value is within the threshold
-- exceededLowWarningThreshold : Present value is greater than the low
-- warning level threshold
-- exceededLowAlarmThreshold : Present value is greater than the low
-- alarm level threshold
-- exceededHighWarningThreshold : Present value is greater than the high
-- warning level threshold
-- exceededHighAlarmThreshold : Present value is greater than the high
-- alarm level threshold"
sfpMIB OBJECT IDENTIFIER ::= {asam 56}
-- SFP MIB
-- ==================================================================
-- | Start of Host SFP Configuration Table |
-- ==================================================================
hostSfpConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HostSfpConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the host shelf SFP direction configuration
information.
ALCATEL NOTE:
TABLESIZE: 8
"
::= {sfpMIB 1}
hostSfpConfigEntry OBJECT-TYPE
SYNTAX HostSfpConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry consists of a list of host shelf SFP configuration parameters."
INDEX {hostConfigSfpFaceplateNumber}
::= {hostSfpConfigTable 1}
HostSfpConfigEntry ::=
SEQUENCE {
hostConfigSfpFaceplateNumber INTEGER,
hostSfpDirection INTEGER
}
hostConfigSfpFaceplateNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is host shelf SFP number on the faceplate.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 1..17
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {hostSfpConfigEntry 1}
hostSfpDirection OBJECT-TYPE
SYNTAX INTEGER {
uplink (1),
downlink (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The host shelf SFP can be configured as downlink or uplink. The default
is uplink.
ALCATEL NOTE:
ACCESS: NA
USAGE: OPT
PERSIST: YES
INSRVMOD: YES
RANGE: NA
DEFVALUE: uplink
UNITS: NA
SPARSE: NO
DESCR: NA
"
-- DEFVAL {1}
::= {hostSfpConfigEntry 2}
-- ==================================================================
-- | Start of Host SFP Configuration Extension Table |
-- ==================================================================
hostSfpConfigExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF HostSfpConfigExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the host shelf SFP configuration information
additional to the host SFP direction configuration.
WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used instead.
ALCATEL NOTE:
TABLESIZE: 24
"
::= {sfpMIB 2}
hostSfpConfigExtEntry OBJECT-TYPE
SYNTAX HostSfpConfigExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry consists of a list of host shelf SFP configuration
parameters which supplements the parameters in hostSfpConfigTable.
WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used instead."
INDEX {hostConfigExtSfpFaceplateNumber}
::= {hostSfpConfigExtTable 1}
HostSfpConfigExtEntry ::=
SEQUENCE {
hostConfigExtSfpFaceplateNumber INTEGER,
hostSfpCableToRack INTEGER,
hostSfpCableToShelf INTEGER,
hostSfpCableToSlot INTEGER
}
hostConfigExtSfpFaceplateNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the host shelf SFP number on the faceplate.
WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used instead.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 1..24
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {hostSfpConfigExtEntry 1}
hostSfpCableToRack OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the Rack ID of the expansion shelf LSM which the host shelf SFP
is planned to cable to. Value 0 means that no rack is specified.
WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used instead.
ALCATEL NOTE:
ACCESS: NA
USAGE: OPT
PERSIST: YES
INSRVMOD: YES
RANGE: 0..7
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {hostSfpConfigExtEntry 2}
hostSfpCableToShelf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the Shelf ID of the expansion shelf LSM which
the host shelf SFP is planned to cable to.
Value 0 means that no shelf is specified.
WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used instead.
ALCATEL NOTE:
ACCESS: NA
USAGE: OPT
PERSIST: YES
INSRVMOD: YES
RANGE: 0..4
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: The shelf identified by hostSfpCableToRack and
hostSfpCableToShelf must already be planned.
"
::= {hostSfpConfigExtEntry 3}
hostSfpCableToSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the Slot ID of the expansion shelf LSM which
the host shelf SFP is planned to cable to.
Value 0 means that no slot is specified.
WARNING This table is now deprecated. ltHostSfpConfigExtTable should be used instead.
ALCATEL NOTE:
ACCESS: NA
USAGE: OPT
PERSIST: YES
INSRVMOD: YES
RANGE: DEP / depends on the shelf type.
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {hostSfpConfigExtEntry 4}
-- ==================================================================
-- | Start of Host SFP Status Table |
-- ==================================================================
hostSfpStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF HostSfpStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the host shelf SFP or XFP status information.
WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead.
ALCATEL NOTE:
TABLESIZE: 26
"
::= {sfpMIB 3}
hostSfpStatusEntry OBJECT-TYPE
SYNTAX HostSfpStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry consists of a list of SFP or XFP status parameters.
WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead."
INDEX {hostStatusSfpFaceplateNumber}
::= {hostSfpStatusTable 1}
HostSfpStatusEntry ::=
SEQUENCE {
hostStatusSfpFaceplateNumber INTEGER,
lanxPortNumber INTEGER,
hostSfpDownlinkStatus INTEGER,
hostSfpCabledToRack INTEGER,
hostSfpCabledToShelf INTEGER,
hostSfpCabledToSlot INTEGER,
hostSfpType INTEGER,
hostSfpCablingMismatch INTEGER,
hostSfpCabledToPhysAddress PhysAddress
}
hostStatusSfpFaceplateNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the host shelf SFP or XFP cage number.
For an SFP cage, it is the faceplate number of the SFP cage (e.g. 1).
For an XFP cage, it is 256 + (the faceplate number of the XFP cage). For
example, if the XFP cage has faceplate label X1,
hostStatusSfpFaceplateNumber == 257.
WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 1..258
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {hostSfpStatusEntry 1}
lanxPortNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This is the Physical LANX or IHUB port to which the SFP or XFP is
connected to. For an SHUB system, the lanxPortNumber here corresponds
to lanxInterfaceIndex in the LANX MIB. For an IHUB system, the
lanxPortNumber to the TmnxPortID to be used in the Timetra Port MIB.
For IHUB this is an 32 bit encoded number for which the structure is
defined in Timetra-TC-MIB.
WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 1..26 for SHUB / 32 Bit Encoded number for IHUB
DEFVALUE: DEP / depends on the hostStatusSfpFaceplateNumber.
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {hostSfpStatusEntry 2}
hostSfpDownlinkStatus OBJECT-TYPE
SYNTAX INTEGER {
ok (1),
sfpNotPresent (2),
los (3),
txFail (4),
invalidAlcatelId (5),
unknown (6),
sfpControlFail (7),
notApplicable (8),
txFailAndLos (9),
sfpPlanDetectMismatch (10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the host shelf SFP or XFP status.
ok (1): The SFP or XFP is operational.
sfpNotPresent (2): The SFP or XFP cage is empty.
los (3): The SFP or XFP has detected Loss of Signal.
txFail (4): The SFP or XFP has detected Transmitter
Fail.
invalidAlcatelId (5): The SFP or XFP does not contain
a valid Alcatel-Lucent ID.
unknown (6): The host expansion card is planned but
not inserted.
sfpControlFail (7): The SFP or XFP is not responding, or the
I2C read failed.
notApplicable (8): Retrieval of status information from the
SFP or XFP cage is not supported.
txFailAndLos (9): The SFP or XFP has detected both
Transmitter Fail and Loss of Signal.
sfpPlanDetectMismatch (10): Not used - superseded by the
hostSfpCablingMismatch object.
WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: NA
DEFVALUE: 6 / status is unknown
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {hostSfpStatusEntry 3}
hostSfpCabledToRack OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Rack ID of the expansion shelf LSM to which the host shelf SFP
is cabled to.
Value 0 means that SFP is not cabled to any expansion shelf LSM.
WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 0..7
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {hostSfpStatusEntry 4}
hostSfpCabledToShelf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Shelf ID of the expansion shelf LSM which the host shelf
SFP is cabled to.
Value 0 means that SFP is not cabled to any expansion shelf LSM.
WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 0..4
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {hostSfpStatusEntry 5}
hostSfpCabledToSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Slot ID of the expansion shelf LSM which the host shelf SFP
is cabled to.
Value 0 means that SFP is not cabled to any expansion shelf LSM.
WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: DEP / depends on the shelf type.
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {hostSfpStatusEntry 6}
hostSfpType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable indicates the type of the SFP or XFP, as read from the
device.
It is a bitmap represented as a sum, therefore, it can represent
multiple types (combination of types) simultaneously.
The SFP type bits (0..7) are as defined in standard SFF-8472.
The XFP type bits (8..15) are as defined in standard INF-8077_v4.5.
The SFP octet and the XFP octet are mutually exclusive (i.e. at least
one of the two octets is always zero).
The various bit positions are:
bit 0 (1): 1000BASE-SX
bit 1 (2): 1000BASE-LX
bit 2 (4): 1000BASE-CX
bit 3 (8): 1000BASE-T
bit 4 (16): 100BASE-LX/LX10
bit 5 (32): 100BASE-FX
bit 6 (64): BASE-BX10
bit 7 (128): BASE-PX
bit 8 (256): reserved for a future XFP type, INF-8077
bit 9 (512): 10GBASE-EW
bit 10 (1024): 10GBASE-LW
bit 11 (2048): 10GBASE-SW
bit 12 (4096): 10GBASE-LRM
bit 13 (8192): 10GBASE-ER
bit 14 (16384): 10GBASE-LR
bit 15 (32768): 10GBASE-SR
bit 16 (65536): 2500BASE-SX
bit 17 (131072): 2500BASE-LX
bit 18 (262144): 2500BASE-BX
If the hostSfpType is unknown or not specified, hostSfpType = 0.
WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 0..65535
DEFVALUE: 0 / hostSfpType unknown
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {hostSfpStatusEntry 7}
hostSfpCablingMismatch OBJECT-TYPE
SYNTAX INTEGER {
noMismatch(1),
unexpectedRemoteLt(2),
assignmentMismatch(3),
incompatibleShelf(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the host shelf SFP cabling mismatch status:
noMismatch(1): no cabling mismatch is detected.
unexpectedRemoteLt(2): a remote LT is detected at an unassigned
downlink SFP port.
assignmentMismatch(3): the detected remote LT does not match
the LT assigned to this host SFP.
incompatibleShelf(4): the detected remote LT is in a shelf
type which is not the planned shelf type.
WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: NA
DEFVALUE: 1 / noMismatch
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {hostSfpStatusEntry 8}
hostSfpCabledToPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physical (MAC) address of the remote interface that is
cabled to this host shelf SFP.
If the remote interface does not have such an address or
the address is not yet discovered, this object would
contain an octet string of zero length.
WARNING This table is now deprecated. ltHostSfpStatusTable should be used instead.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {hostSfpStatusEntry 9}
-- ==================================================================
-- | Start of Expansion Shelf SFP Status Table |
-- ==================================================================
expSfpStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExpSfpStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the expansion shelf SFP status information.
ALCATEL NOTE:
TABLESIZE: 312 (24 + 288)
"
::= {sfpMIB 4}
expSfpStatusEntry OBJECT-TYPE
SYNTAX ExpSfpStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry consists of the expansion shelf SFP status."
INDEX {expSfpRack,expSfpShelf,expSfpSlot}
::= {expSfpStatusTable 1}
ExpSfpStatusEntry ::=
SEQUENCE {
expSfpRack INTEGER,
expSfpShelf INTEGER,
expSfpSlot INTEGER,
expSfpStatus INTEGER,
hostSfpFaceplateNumber INTEGER,
expSfpType INTEGER,
hostSfpLogSlotId EqptSlotIndex
}
expSfpRack OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Rack ID of the expansion shelf SFP (actually its
corresponding LSM).
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 1..7
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {expSfpStatusEntry 1}
expSfpShelf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Shelf ID of the expansion shelf SFP (actually
its corresponding LSM).
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 1..4
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {expSfpStatusEntry 2}
expSfpSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Slot ID of the expansion shelf SFP (actually its
corresponding LSM).
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: DEP / depends on the shelf type.
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {expSfpStatusEntry 3}
expSfpStatus OBJECT-TYPE
SYNTAX INTEGER {
ok (1),
sfpNotPresent (2),
los (3),
txFail (4),
invalidAlcatelId (5),
unknown (6),
sfpControlFail (7),
txFailAndLos (8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the status of the expansion shelf SFP:
ok (1): the expansion shelf SFP is operational.
sfpNotPresent (2): no SFP present.
los (3): LOS is detected by the expansion shelf SFP.
txFail (4): the expansion shelf TX failed.
invalidAlcatelId (5): the expansion shelf SFP plugged does not
have a valid Alcatel ID.
unknown (6): the status is not available or cannot
be retrieved.
sfpControlFail (7): SFP not responding or I2C failure.
txFailAndLos (8): the expansion shelf TX failed and LOS is
detected by the expansion shelf SF
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: NA
DEFVALUE: 6 / unknown
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {expSfpStatusEntry 4}
hostSfpFaceplateNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the faceplate number of the host shelf SFP which the expansion
shelf SFP is cabled to. If an expansion shelf SFP is not cabled to any
host shelf SFP, the value of the corresponding hostSfpFaceplateNumber
is set to 0.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 0..24
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {expSfpStatusEntry 5}
expSfpType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable indicates the type of the SFP. It is a bitmap represented
as a sum, therefore, it can represent multiple types (combination
of types) simultaneously. The various bit positions are:
bit 0 (1): 1000BASE-SX
bit 1 (2): 1000BASE-LX
bit 2 (4): 1000BASE-CX
bit 3 (8): 1000BASE-T
bit 4 (16): 100BASE-LX/LX10
bit 5 (32): 100BASE-FX
bit 6 (64): BASE-BX10
bit 7 (128): BASE-PX
bit 16 (65536): 2500BASE-SX
bit 17 (131072): 2500BASE-LX
bit 18 (262144): 2500BASE-BX
If the expSfpType is unknown or not specified, expSfpType = 0.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: NA
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {expSfpStatusEntry 6}
hostSfpLogSlotId OBJECT-TYPE
SYNTAX EqptSlotIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the LogSlotId of the host LT which the expansion
shelf SFP is cabled to. If an expansion shelf SFP is not cabled to any
host shelf SFP, the value of the corresponding hostSfpLogSlotId
is set to 0.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: see above
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {expSfpStatusEntry 7}
-- ==================================================================
-- | Start of SFP Diag Table |
-- ==================================================================
-- sfpDiagTable definition
sfpDiagTable OBJECT-TYPE
SYNTAX SEQUENCE OF SfpDiagEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The primary purpose of this read-only table: allow the SNMP
manager to read real-time diagnostic measurements (e.g. the
SFP's received optical power level) from the A2 bank of a
manager-specified SFP. The A2 bank and content are defined in
the SFF-8472 standard (available at ftp.seagate.com).
The table is indexed to allow support for any SFP cage in
the system.
In a particular release, SFP diagnostics support for a
particular assembly may or may not be provided, and support for
all the cages on a supported assembly may or may not be
provided. If an assembly has any supported SFP cages, a row will be
present in this table for each of its SFP cages.
A row is present whether or not the SFP cage contains an SFP,
and whether or not the SFP supports diagnostics. If the SFP
cage contains an SFP, some status information (e.g. LOS and
TxFault status) is available in the row. An enumerated object
(sfpDiagAvailable) is used to indicate the condition/error
(or no error) encountered when attempting to read the
diagnostics information for the specified cage (e.g. cage
empty, or A2 checksum failed).
Details are documented with the individual objects.
The following table size field is set to 'not applicable',
since it does not make sense for the SNMP manager to cache the
values in this table. The values will be different each time
they are read from agent.
ALCATEL NOTE:
TABLESIZE: NA
DESCR: NA
"
::= {sfpMIB 5}
-- List the two index columns of the sfpDiagTable.
sfpDiagEntry OBJECT-TYPE
SYNTAX SfpDiagEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The index for the sfpDiagTable identifies an SFP cage
using two fields: the logicalSlotId of the card associated
with the SFP cage (normally the card with the cages on its
faceplate), and the SFP cage number."
INDEX {sfpDiagLogicalSlot, sfpDiagSfpFaceplateNumber}
::= {sfpDiagTable 1}
-- List all the columns in the sfpDiagTable.
SfpDiagEntry ::=
SEQUENCE {
sfpDiagLogicalSlot INTEGER,
sfpDiagSfpFaceplateNumber INTEGER,
sfpDiagAvailable INTEGER,
sfpDiagLOS INTEGER,
sfpDiagTxFault INTEGER,
sfpDiagTxPower DisplayString,
sfpDiagRxPower DisplayString,
sfpDiagTxBiasCurrent DisplayString,
sfpDiagSupplyVoltage DisplayString,
sfpDiagTemperature DisplayString,
sfpDiagTCAStatusTemperature SfpDiagTCAStatus,
sfpDiagTCAStatusVoltage SfpDiagTCAStatus,
sfpDiagTCAStatusBiasCurrent SfpDiagTCAStatus,
sfpDiagTCAStatusTxPower SfpDiagTCAStatus,
sfpDiagTCAStatusRxPower SfpDiagTCAStatus,
sfpDiagRSSIProfileId INTEGER,
sfpDiagRSSIState INTEGER,
sfpDiagRSSIRxPowerAlmLow DisplayString,
sfpDiagRSSIRxPowerAlmHigh DisplayString,
sfpDiagRSSIRxPowerWarnLow DisplayString,
sfpDiagRSSIRxPowerWarnHigh DisplayString,
sfpDiagRSSITxPowerAlmLow DisplayString,
sfpDiagRSSITxPowerAlmHigh DisplayString,
sfpDiagRSSITxPowerWarnLow DisplayString,
sfpDiagRSSITxPowerWarnHigh DisplayString,
sfpDiagRSSITemperatureAlmLow DisplayString,
sfpDiagRSSITemperatureAlmHigh DisplayString,
sfpDiagRSSITemperatureWarnLow DisplayString,
sfpDiagRSSITemperatureWarnHigh DisplayString,
sfpDiagRSSIBiasAlmLow DisplayString,
sfpDiagRSSIBiasAlmHigh DisplayString,
sfpDiagRSSIBiasWarnLow DisplayString,
sfpDiagRSSIBiasWarnHigh DisplayString,
sfpDiagRSSIVoltageAlmLow DisplayString,
sfpDiagRSSIVoltageAlmHigh DisplayString,
sfpDiagRSSIVoltageWarnLow DisplayString,
sfpDiagRSSIVoltageWarnHigh DisplayString,
sfpDiagRSSIExtRxPowerAlmLow DisplayString,
sfpDiagRSSIExtRxPowerAlmHigh DisplayString,
sfpDiagRSSIExtRxPowerWarnLow DisplayString,
sfpDiagRSSIExtRxPowerWarnHigh DisplayString,
sfpDiagRSSIExtTxPowerAlmLow DisplayString,
sfpDiagRSSIExtTxPowerAlmHigh DisplayString,
sfpDiagRSSIExtTxPowerWarnLow DisplayString,
sfpDiagRSSIExtTxPowerWarnHigh DisplayString,
sfpDiagRSSIExtBiasAlmLow DisplayString,
sfpDiagRSSIExtBiasAlmHigh DisplayString,
sfpDiagRSSIExtBiasWarnLow DisplayString,
sfpDiagRSSIExtBiasWarnHigh DisplayString,
sfpDiagRSSIExtTemperatureAlmLow DisplayString,
sfpDiagRSSIExtTemperatureAlmHigh DisplayString,
sfpDiagRSSIExtTemperatureWarnLow DisplayString,
sfpDiagRSSIExtTemperatureWarnHigh DisplayString
}
-- Define the first index column of the sfpDiagTable.
sfpDiagLogicalSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the first index of the sfpDiagTable.
Normally, this object contains the Logical Slot ID (as defined in
the Equipment MIB) of the card which has the SFP cage of interest
on its faceplate.
If that card does not have a Logical Slot ID, the Logical Slot ID
of a related card is used.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: 1..65535
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {sfpDiagEntry 1}
-- Define the second (and final) index column of the sfpDiagTable.
sfpDiagSfpFaceplateNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the second index of the sfpDiagTable.
It is the number of the SFP cage, as shown on the card
faceplate. If the faceplate cage number is zero,
sfpDiagSfpFaceplateNumber=0 is used (i.e. zero is not a
special case).
For an SFP cage, it is the faceplate number of the SFP cage
(e.g. 1).
For an SFP+/XFP cage, it is 256 + the faceplate number
of the XFP cage. For example, if the SFP+/XFP cage has
faceplate label X1, sfpInvFaceplateNumber = 257.
For an QSFP cage, it is 512 + the faceplate number
of the QSFP cage. For example, if the QSFP cage has
faceplate label Q1, sfpInvFaceplateNumber = 513.
For a CFP4 cage, it is 768 + the faceplate number
of the CFP4 cage. For example, if the CFP4 cage has
faceplate label C1, sfpInvFaceplateNumber = 769.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: 0..769
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {sfpDiagEntry 2}
-- Define a non-index column of the sfpDiagTable.
sfpDiagAvailable OBJECT-TYPE
SYNTAX INTEGER {
noError (1),
cageDoesNotSupportDiag(2),
cageEmpty (3),
cageDoesNotSupportA2 (4),
a0ReadFailed (5),
a0ChecksumFailed (6),
sfpDoesNotSupportA2 (7),
a2ReadFailed (8),
a2ChecksumFailed (9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpDiagTable, with the following code points.
noError - valid values for all objects in this row (e.g.
sfpDiagRxPower) were obtained from the SFP in the specified
cage.
cageDoesNotSupportDiag - the specified cage does not support
reading LOS, TxFault, or A2 measurements. All subsequent values in the
row have notAvailable or 'Not Available' values.
cageEmpty - the specified SFP cage does not contain an SFP.
All subsequent values in the row have notAvailable or
'Not Available' values.
cageDoesNotSupportA2 - the specified SFP cage does not support
access to the SFP A2 bank (e.g. because of limitations in
FPGA support on the host card). sfpDiagLOS and
sfpDiagTxFault have valid values (since they are implemented
using external signals, not SFP EEPROM values).
a0ReadFailed - the attempt to read the A0 bank of the
specified SFP failed. A0 is read to determine if A2 is
supported, so no attempt was made to read the A2
information. sfpDiagLOS and sfpDiagTxFault have valid
values (since they are implemented using external signals,
not SFP EEPROM values).
a0ChecksumFailed - the A0 bank of the SFP EEPROM is
corrupted. sfpDiagLOS and sfpDiagTxFault have valid values
(since they are implemented using external signals, not SFP
EEPROM values).
sfpDoesNotSupportA2 - the A0 bank of the SFP EEPROM indicates
A2 is not supported. sfpDiagLOS and sfpDiagTxFault have
valid values (since they are implemented using external
signals, not SFP EEPROM values).
a2ReadFailed - the attempt to read the A2 bank of the
specified SFP failed. sfpDiagLOS and sfpDiagTxFault have
valid values (since they are implemented using external
signals, not SFP EEPROM values).
a2ChecksumFailed - the A2 bank of the SFP EEPROM is
corrupted. sfpDiagLOS and sfpDiagTxFault have valid values
(since they are implemented using external signals, not SFP
EEPROM values).
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpDiagEntry 3}
-- Define a non-index column of the sfpDiagTable.
sfpDiagLOS OBJECT-TYPE
SYNTAX INTEGER {
los (1),
noLos (2),
notAvailable (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpDiagTable, with the following code
points.
los - the SFP in the specified SFP cage has detected Loss of
Signal (on its receiver).
noLos - the SFP in the specified SFP cage has detected a
received signal with a suitable power level.
notAvailable - the status of the received signal for the
specified SFP cage cannot be determined (e.g. because the
cage is empty - see sfpDiagAvailable).
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpDiagEntry 4}
-- Define a non-index column of the sfpDiagTable.
sfpDiagTxFault OBJECT-TYPE
SYNTAX INTEGER {
txFault (1),
noTxFault (2),
notApplicable (3),
notAvailable (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpDiagTable, with the following code
points.
txFault - the SFP in the specified SFP cage has detected a
TxFault error (as defined in SFF-8472).
noTxFault - the SFP in the specified SFP cage has not detected
a TxFault error.
notApplicable - the SFP is electrical, so TxFault is not
applicable (the detection technology is optical).
notAvailable - the TxFault status of the specified SFP cage
cannot be determined (e.g. because the cage is empty - see
sfpDiagAvailable).
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpDiagEntry 5}
-- Define a non-index column of the sfpDiagTable.
sfpDiagTxPower OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpDiagTable, containing the freshly-measured
transmit power of the specified SFP, encoded into a string.
Five types of values are supported. In the following text,
strings are enclosed in single quotes (a double quote marks the
end of the DESCRIPTION field).
1. '-40.00 dBm' to '8.16 dBm', in 0.01 dBm increments. Note
that ' dBm' is included in the string.
2. 'No Power'. This is a special case because an SFP reading
of 0.00 mW cannot be converted to dBm (since log10(0.00) is
undefined).
3. 'Not Applicable'. This is used for an electrical SFP. The
technology for measuring transmitted power is optical.
4. 'Not Available'. The measurement could not be obtained
(e.g. the specified SFP cage is empty).
5. 'Invalid'. The transmitted power, in mW, is negative (for example,
due to incorrect external calibration constants in the SFP). A
negative mW value is not valid in this context, and cannot be
converted to dBm.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpDiagEntry 6}
-- Define a non-index column of the sfpDiagTable.
sfpDiagRxPower OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpDiagTable, containing the freshly-measured
received power of the specified SFP, encoded into a string.
Five types of values are supported. In the following text,
strings are enclosed in single quotes (a double quote marks the
end of the DESCRIPTION field).
1. '-40.00 dBm' to '8.16 dBm', in 0.01 dBm increments. Note
that ' dBm' is included in the string.
2. 'No Power'. This is a special case because an SFP reading
of 0.00 mW cannot be converted to dBm (since log10(0.00) is
undefined).
3. 'Not Applicable'. This is used for an electrical SFP. The
technology for measuring received power is optical.
4. 'Not Available'. The measurement could not be obtained
(e.g. the specified SFP cage is empty).
5. 'Invalid'. The received power, in mW, is negative (for example,
due to incorrect external calibration constants in the SFP). A
negative mW value is not valid in this context, and cannot be
converted to dBm.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpDiagEntry 7}
-- Define a non-index column of the sfpDiagTable.
sfpDiagTxBiasCurrent OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpDiagTable, containing the freshly-measured
transmit bias current of the specified SFP, encoded into a
string.
Four types of values are supported. In the following text,
strings are enclosed in single quotes (a double quote marks the
end of the DESCRIPTION field).
1. '0.00 mA' to '131.10 mA', in 0.01 mA increments. Note that
' mA' is included in the string.
2. 'Not Applicable'. This is used for an electrical SFP. The
technology for measuring transmit bias current is optical.
3. 'Not Available'. The measurement could not be obtained
(e.g. the specified SFP cage is empty).
4. 'Invalid'. The bias current, in mA, is negative (for example,
due to incorrect external calibration constants in the SFP). A
negative mA value is not valid in this context.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpDiagEntry 8}
-- Define a non-index column of the sfpDiagTable.
sfpDiagSupplyVoltage OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpDiagTable, containing the freshly-measured
supply voltage of the specified SFP, encoded into a string.
Three types of values are supported. In the following text,
strings are enclosed in single quotes (a double quote marks the
end of the DESCRIPTION field).
1. '0.00 VDC' to '6.55 VDC', in 0.01 VDC increments. Note that
' VDC' is included in the string.
2. 'Not Available'. The measurement could not be obtained
(e.g. the specified SFP cage is empty).
3. 'Invalid'. The supply voltage, in VDC, is negative (for example,
due to incorrect external calibration constants in the SFP). A
negative VDC value is not valid in this context.
The supply voltage can be retrieved from an electrical SFP, so
there is no need for a 'Not Applicable' string.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpDiagEntry 9}
-- Define a non-index column of the sfpDiagTable.
sfpDiagTemperature OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpDiagTable, containing the freshly-measured
temperature of the specified SFP, encoded into a string.
Two types of values are supported. In the following text,
strings are enclosed in single quotes (a double quote marks the
end of the DESCRIPTION field).
1. '-128.00 degrees Celsius' to '128.00 degrees Celsius',
in 0.01 degrees Celsius increments.
Note that ' degrees Celsius' is included in the string.
2. 'Not Available'. The measurement could not be obtained
(e.g. the specified SFP cage is empty).
The temperature can be retrieved from an electrical SFP, so
there is no need for a 'Not Applicable' string.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpDiagEntry 10}
-- Define a non-index column of the sfpDiagTable.
sfpDiagTCAStatusTemperature OBJECT-TYPE
SYNTAX SfpDiagTCAStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpDiagTable, containing the freshly-measured temperature
alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpDiagEntry 11}
-- Define a non-index column of the sfpDiagTable.
sfpDiagTCAStatusVoltage OBJECT-TYPE
SYNTAX SfpDiagTCAStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpDiagTable, containing the freshly-measured voltage
alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4.
For XFP, this parameter will display as NotAvailable in case it is not
supported as one of the Auxillary measured value by XFP.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpDiagEntry 12}
sfpDiagTCAStatusBiasCurrent OBJECT-TYPE
SYNTAX SfpDiagTCAStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpDiagTable, containing the freshly-measured bias current
alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpDiagEntry 13}
sfpDiagTCAStatusTxPower OBJECT-TYPE
SYNTAX SfpDiagTCAStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpDiagTable, containing the freshly-measured received
power alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpDiagEntry 14}
sfpDiagTCAStatusRxPower OBJECT-TYPE
SYNTAX SfpDiagTCAStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpDiagTable, containing the freshly-measured transmit
power alarm/warning threshold crossing status of the specified SFP/SFP+/XFP/CFP4.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpDiagEntry 15}
sfpDiagRSSIProfileId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the RSSI TCA profile, refer to SfpRSSIProfileTable.
65535 means auto mode. When configured 65535, when sfp is plugged in, system will detect sfp type and associate related sfp rssi profile. User cannot modify the threshold values of this profile id.
1-200 denotes user-defined profile where user can configure the RSSI threshold values.
ALCATEL NOTE:
ACCESS: NA
usage: OPT
persistent: YES
INSRVMOD:YES
RANGE:1..200,65535
DEFVALUE: 65535
UNITS: NA
SPARSE: NA "
::= { sfpDiagEntry 16}
sfpDiagRSSIState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable(1) and Disable(2) to RSSI function on port level.
ALCATEL NOTE:
ACCESS: NA usage: OPT
persistent: YES INSRVMOD:YES
RANGE:1,2 DEFVALUE: 2
UNITS: NA SPARSE: NA "
::= { sfpDiagEntry 17}
sfpDiagRSSIRxPowerAlmLow OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for alarm OLTRXPWLO. if RX power is less than this value,then alarm OLTRXPWLO will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network lane.
For ONT Profile, 0.5dBm means using ont internal policy.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned threshold values.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 18 }
sfpDiagRSSIRxPowerAlmHigh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTRXPWHI. When RX power is larger than this value,then alarm OLTRXPWHI will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network lane.
For ONT Profile, 0.5dBm means using ont internal policy.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned threshold values.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 19 }
sfpDiagRSSIRxPowerWarnLow OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTRXPWLOWARN. When Rx power is less than this value,alarm OLTRXPWLOWARN will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network lane.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned threshold values.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 20 }
sfpDiagRSSIRxPowerWarnHigh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTRXPWHIWARN. When Rx power is larger than this value,alarm OLTRXPWHIWARN will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network lane.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned threshold values.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 21 }
sfpDiagRSSITxPowerAlmLow OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTTXPWLO. When Tx power is less than this value,alarm OLTTXPWLO will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network lane.
For ONT Profile, -63.5dBm means using ONT internal policy.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 22 }
sfpDiagRSSITxPowerAlmHigh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTTXPWHI. When Tx power is larger than this value,alarm OLTTXPWHI will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network lane.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 23 }
sfpDiagRSSITxPowerWarnLow OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTTXPWLOWARN. When Tx power is less than this value,alarm OLTTXPWLOWARN will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network lane.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 24 }
sfpDiagRSSITxPowerWarnHigh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTTXPWHIWARN. When Tx power is larger than this value,alarm OLTTXPWHIWARN will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network lane.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 25 }
sfpDiagRSSITemperatureAlmLow OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTTEMPLO. when temperature is less than this value, then alarm OLTTEMPLO will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is indicated by sfpDiagRSSIExtTemperatureAlmLow.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 26 }
sfpDiagRSSITemperatureAlmHigh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTTEMPHI. When temperature is larger than this value,alarm OLTTEMPHI will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is indicated by sfpDiagRSSIExtTemperatureAlmHigh.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 27 }
sfpDiagRSSITemperatureWarnLow OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTTEMPLOWARN. when temperature is less than this value, then alarm OLTTEMPLOWARN will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is indicated by sfpDiagRSSIExtTemperatureWarnLow.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 28 }
sfpDiagRSSITemperatureWarnHigh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTTEMPHIWARN. When temperature is larger than this value,alarm OLTTEMPHIWARN will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is indicated by sfpDiagRSSIExtTemperatureWarnHigh.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 29 }
sfpDiagRSSIBiasAlmLow OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTBIASLO. when bias is less than this value, then alarm OLTBIASLO will be reported.
For CFP4,this is the module level threshold.The network lane threshold is indicated by sfpDiagRSSIExtBiasAlmLow.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 30 }
sfpDiagRSSIBiasAlmHigh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTBIASHI. when bias is larger than this value, then alarm OLTBIASHI will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is indicated by sfpDiagRSSIExtBiasAlmHigh.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 31 }
sfpDiagRSSIBiasWarnLow OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTBIASLOWARN. when bias is less than this value, then alarm OLTBIASLOWARN will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is indicated by sfpDiagRSSIExtBiasWarnLow.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 32 }
sfpDiagRSSIBiasWarnHigh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTBIASHIWARN. when bias is larger than this value, then alarm OLTBIASHIWARN will be reported.
For CFP4,this is the module level threshold.The network lane level threshold is indicated by sfpDiagRSSIExtBiasWarnHigh.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 33 }
sfpDiagRSSIVoltageAlmLow OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTVOLLO. when voltage is less than this value, then alarm OLTVOLLO will be reported.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 34 }
sfpDiagRSSIVoltageAlmHigh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTVOLHI. when voltage is larger than this value, then alarm OLTVOLHI will be reported.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 35 }
sfpDiagRSSIVoltageWarnLow OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTVOLLOWARN. when voltage is less than this value, then alarm OLTVOLLOWARN will be reported.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 36 }
sfpDiagRSSIVoltageWarnHigh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTVOLHIWARN. when voltage is larger than this value, then alarm OLTVOLHIWARN will be reported.
'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 37 }
sfpDiagRSSIExtRxPowerAlmLow OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for alarm OLTRXPWLO. if RX power is less than this value, then alarm OLTRXPWLO will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others.
For EPON SFPs 'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: 0
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 38 }
sfpDiagRSSIExtRxPowerAlmHigh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTRXPWHI. When RX power is larger than this value,then alarm OLTRXPWHI will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others.
For EPON SFPs 'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 39}
sfpDiagRSSIExtRxPowerWarnLow OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTRXPWLOWARN. When Rx power is less than this value,alarm OLTRXPWLOWARN will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others.
For EPON SFPs 'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 40}
sfpDiagRSSIExtRxPowerWarnHigh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTRXPWHIWARN. When Rx power is larger than this value,alarm OLTRXPWHIWARN will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others.
For EPON SFPs 'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 41}
sfpDiagRSSIExtTxPowerAlmLow OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for EXTOLTTXPWLO. When Tx power is less than this value,alarm EXTOLTTXPWLO will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others.
For EPON SFPs 'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 42 }
sfpDiagRSSIExtTxPowerAlmHigh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for EXTOLTTXPWHI. When Tx power is larger than this value,alarm EXTOLTTXPWHI will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others.
For EPON SFPs 'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 43 }
sfpDiagRSSIExtTxPowerWarnLow OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for EXTOLTTXPWLOWARN. When Tx power is less than this value,alarm EXTOLTTXPWLOWARN will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others.
For EPON SFPs 'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 44 }
sfpDiagRSSIExtTxPowerWarnHigh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for EXTOLTTXPWHIWARN. When Tx power is larger than this value,alarm EXTOLTTXPWHIWARN will be reported.
Applicable only for 10G EPON SFPs,Shown as 'Not Applicable' for others.
For EPON SFPs 'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 45 }
sfpDiagRSSIExtBiasAlmLow OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASLO. when bias is less than this value, then alarm EXTOLTBIASLO will be reported.
For CFP4, this object indicates the threshold for OLTBIASLO.When any network lane's bias is less than this value, then alarm OLTBIASLO will be reported.
For CFP4,this is the network lane level threshold.The module level threshold is indicated by sfpDiagRSSIBiasAlmLow.
Applicable for 10G EPON SFPs and CFP4,Shown as 'Not Applicable' for others.
For EPON SFPs and CFP4 'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 46 }
sfpDiagRSSIExtBiasAlmHigh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASHI. when bias is larger than this value, then alarm EXTOLTBIASHI will be reported.
For CFP4, this object indicates the threshold for OLTBIASHI.When any network lane's bias is larger than this value, then alarm OLTBIASHI will be reported.
For CFP4,this is the network lane level threshold.The module level threshold is indicated by sfpDiagRSSIBiasAlmHigh.
Applicable for 10G EPON SFPs and CFP4,Shown as 'Not Applicable' for others.
For EPON SFPs and CFP4 'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 47 }
sfpDiagRSSIExtBiasWarnLow OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASLOWARN. when bias is less than this value,then alarm EXTOLTBIASLOWARN will be reported.
For CFP4, this object indicates the threshold for OLTBIASLOWARN.When any network lane's bias is less than this value, then alarm OLTBIASLOWARN will be reported.
For CFP4,this is the network lane level threshold.The module level threshold is indicated by sfpDiagRSSIBiasWarnLow.
Applicable for 10G EPON SFPs and CFP4,Shown as 'Not Applicable' for others.
For EPON SFPs and CFP4 'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 48 }
sfpDiagRSSIExtBiasWarnHigh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASHIWARN. when bias is larger than this value,then alarm EXTOLTBIASHIWARN will be reported.
For CFP4, this object indicates the threshold for OLTBIASHIWARN.When any network lane's bias is larger than this value, then alarm OLTBIASHIWARN will be reported.
For CFP4,this is the network lane level threshold.The module level threshold is indicated by sfpDiagRSSIBiasWarnHigh.
Applicable for 10G EPON SFPs and CFP4,Shown as 'Not Applicable' for others.
For EPON SFPs and CFP4 'Not Available' is shown when the measurement could not be obtained,If the specified SFP cage is empty or if RSSI is not enabled and no profile assigned.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 49 }
sfpDiagRSSIExtTemperatureAlmLow OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object indicates the laser temperature low alarm threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is less than this value,then alarm OLTTEMPLO will be reported.
The module level threshold is indicated by sfpDiagRSSITemperatureAlmLow.
Applicable only for CFP4,Shown as 'Not Applicable' for others.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 50 }
sfpDiagRSSIExtTemperatureAlmHigh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object indicates the laser temperature high alarm threshold of network lanefor CFP4.
When any network lane's laser temperature of CFP4 is larger than this value,then alarm OLTTEMPHI will be reported.
The module level threshold is indicated by sfpDiagRSSITemperatureAlmHigh.
Applicable only for CFP4,Shown as 'Not Applicable' for others.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 51 }
sfpDiagRSSIExtTemperatureWarnLow OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object indicates the laser temperature low warning threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is less than this value,then alarm OLTTEMPLOWARN will be reported.
The module level threshold is indicated by sfpDiagRSSITemperatureWarnLow.
Applicable only for CFP4,Shown as 'Not Applicable' for others.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 52 }
sfpDiagRSSIExtTemperatureWarnHigh OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object indicates the laser temperature high warning threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is larger than this value,then alarm OLTTEMPHIWARN will be reported.
The module level threshold is indicated by sfpDiagRSSITemperatureWarnHigh.
Applicable only for CFP4,Shown as 'Not Applicable' for others.
'Not Supported' is shown when the matching profile is not found.
ALCATEL NOTE:
ACCESS: RO USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA "
::= { sfpDiagEntry 53 }
-- ==================================================================
-- | End of SFP Diag Table |
-- ==================================================================
-- ==================================================================
-- | Start of SFP Inventory Table |
-- ==================================================================
-- sfpInventoryTable definition
sfpInventoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF SfpInventoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The primary purpose of this read-only table: allow the SNMP
manager to read read-only EEPROM contents from EEPROM of SFP
Details are documented with the individual objects.
The following table size field is set to 'not applicable',
since it does not make sense for the SNMP manager to cache the
values in this table. The values will be different each time
they are read from agent.
ALCATEL NOTE:
TABLESIZE: NA
DESCR: NA
"
::= {sfpMIB 6}
-- List the two index columns of the sfpInventoryTable.
sfpInventoryEntry OBJECT-TYPE
SYNTAX SfpInventoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The index for the sfpInventoryTable identifies an SFP cage
using two fields: the logicalSlotId of the card associated
with the SFP cage (normally the card with the cages on its
faceplate), and the SFP cage number."
INDEX {sfpInvLogicalSlot, sfpInvFaceplateNumber}
::= {sfpInventoryTable 1}
-- List all the columns in the sfpInventoryTable.
SfpInventoryEntry ::=
SEQUENCE {
sfpInvLogicalSlot INTEGER,
sfpInvFaceplateNumber INTEGER,
sfpInvAvailable INTEGER,
sfpInvFiberType INTEGER,
sfpInvAluPartNumber DisplayString,
sfpInvCLEIcode DisplayString,
sfpInvTxWavelength DisplayString,
sfpInvAdditionalInfo DisplayString,
sfpInvMfgName DisplayString,
sfpInvMfgOUICode DisplayString,
sfpInvMfgSerialNumber DisplayString,
sfpInvMfgDate DisplayString,
sfpInvSpecificalType INTEGER
}
-- Define the first index column of the sfpInventoryTable.
sfpInvLogicalSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the first index of the sfpInventoryTable.
Normally, this object contains the Logical Slot ID (as defined in
the Equipment MIB) of the card which has the SFP cage of interest
on its faceplate.
If that card does not have a Logical Slot ID, the Logical Slot ID
of a related card is used.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: 1..65535
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {sfpInventoryEntry 1}
-- Define the second (and final) index column of the sfpInventoryTable.
sfpInvFaceplateNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the second index of the sfpInventoryTable.
It is the number of the SFP cage, as shown on the card
faceplate. If the faceplate cage number is zero,
sfpInvFaceplateNumber=0 is used (i.e. zero is not a
special case).
For an SFP cage, it is the faceplate number of the SFP cage
(e.g. 1).
For an SFP+/XFP cage, it is 256 + the faceplate number
of the XFP cage. For example, if the SFP+/XFP cage has
faceplate label X1, sfpInvFaceplateNumber = 257.
For an QSFP cage, it is 512 + the faceplate number
of the QSFP cage. For example, if the QSFP cage has
faceplate label Q1, sfpInvFaceplateNumber = 513.
For a CFP4 cage, it is 768 + the faceplate number
of the CFP4 cage. For example, if the CFP4 cage has
faceplate label C1, sfpInvFaceplateNumber = 769.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: 0..769
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {sfpInventoryEntry 2}
-- Define a non-index column of the sfpInventoryTable.
sfpInvAvailable OBJECT-TYPE
SYNTAX INTEGER {
noError (1),
cageEmpty (2),
cageDoesNotSupportA2 (3),
a0ReadFailed (4),
a0ChecksumFailed (5),
sfpDoesNotSupportA2 (6),
a2ReadFailed (7),
a2ChecksumFailed (8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpInventoryTable, with the following code points.
noError - valid values for all objects in this row (e.g.
sfpDiagRxPower) were obtained from the SFP in the specified
cage.
cageEmpty - the specified SFP cage does not contain an SFP.
All subsequent values in the row have notAvailable or
'Not Available' values.
cageDoesNotSupportA2 - the specified SFP cage does not support
access to the SFP A2 bank (e.g. because of limitations in
FPGA support on the host card). sfpDiagLOS and
sfpDiagTxFault have valid values (since they are implemented
using external signals, not SFP EEPROM values).
a0ReadFailed - the attempt to read the A0 bank of the
specified SFP failed. A0 is read to determine if A2 is
supported, so no attempt was made to read the A2
information. sfpDiagLOS and sfpDiagTxFault have valid
values (since they are implemented using external signals,
not SFP EEPROM values).
a0ChecksumFailed - the A0 bank of the SFP EEPROM is
corrupted. sfpDiagLOS and sfpDiagTxFault have valid values
(since they are implemented using external signals, not SFP
EEPROM values).
sfpDoesNotSupportA2 - the A0 bank of the SFP EEPROM indicates
A2 is not supported. sfpDiagLOS and sfpDiagTxFault have
valid values (since they are implemented using external
signals, not SFP EEPROM values).
a2ReadFailed - the attempt to read the A2 bank of the
specified SFP failed. sfpDiagLOS and sfpDiagTxFault have
valid values (since they are implemented using external
signals, not SFP EEPROM values).
a2ChecksumFailed - the A2 bank of the SFP EEPROM is
corrupted. sfpDiagLOS and sfpDiagTxFault have valid values
(since they are implemented using external signals, not SFP
EEPROM values).
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpInventoryEntry 3}
-- Define a non-index column of the sfpInventoryTable.
sfpInvFiberType OBJECT-TYPE
SYNTAX INTEGER
{
singleMode(1),
multiMode(2),
notAvailable(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpInventoryTable, containing the fiber type of
the specified SFP/SFP+.
For XFP, it is always singleMode
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpInventoryEntry 4}
sfpInvAluPartNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpInventoryTable, containing the Alcatel-Lucent part number
of the specified SFP/SFP+/XFP, encoded into a string.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpInventoryEntry 5}
sfpInvCLEIcode OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpInventoryTable, containing the CLEI code
of the specified SFP/SFP+/XFP, encoded into a string.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpInventoryEntry 6}
sfpInvTxWavelength OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpInventoryTable, containing the transmit wavelength
of the specified SFP/SFP+/XFP, encoded into a string.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpInventoryEntry 7}
sfpInvAdditionalInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpInventoryTable, containing the customer specific
additional information of the specified SFP/SFP+/XFP, encoded into a string.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpInventoryEntry 8}
sfpInvMfgName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpInventoryTable, containing the manufacturer or
vendor name of the specified SFP/SFP+/XFP, encoded into a string.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpInventoryEntry 9}
sfpInvMfgOUICode OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpInventoryTable, containing the manufacturer or
vendor OUI code of the specified SFP/SFP+/XFP, encoded into a string.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpInventoryEntry 10}
sfpInvMfgSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpInventoryTable, containing the manufacturer or
vendor serial number of the specified SFP/SFP+/XFP, encoded into a string.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpInventoryEntry 11}
sfpInvMfgDate OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A column in the sfpInventoryTable, containing the manufactured date
of the specified SFP/SFP+/XFP, encoded into a string.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { sfpInventoryEntry 12}
sfpInvSpecificalType OBJECT-TYPE
SYNTAX INTEGER
{
sfpUnknown(0),
px20(1),
px20plus(2),
prx-t1(3),
pr-t2(4),
prx-t3(5),
pr-t4(6),
bPlusCAA(7),
bPlusIAC(8),
cPlusCBA(9),
cPlusIBC(10),
base10G-ER(11),
base10G-SR(12),
base10G-LR(13),
base1000-T(14),
base1000-LX(15),
base1000-BX10-U(16),
base1000-EX(17),
base1000-ZX(18),
n1-c(19),
n2a-c(20),
n2b-c(21),
base1000-SX(22),
base1000-CX(23),
base1000-BX10-D(24),
base100-FX(25),
base100-TX(26),
base2500(27),
base10G-LRM(28),
base10G-EW(29),
base10G-SW(30),
base10G-LW(31),
base40G-LR4(32),
base40G-SR4(33),
base40G-CR4(34),
base100-LX(35),
base100-BX10-U(36),
base100-BX10-D(37),
base1000-VX(38),
e1eth(39),
e3eth(40),
stm1eth(41),
e1tdm(42),
bPlusIONU(43),
base10G-BX40-U(44),
base10G-BX40-D(45),
base1000-BX40-U(46),
base1000-BX40-D(47),
base1000-BX20-U(48),
base1000-BX20-D(49),
base10G-ZR-CWDM(50),
base10G-ZR-DWDM(51),
n1-i(52),
n2a-i(53),
n2b-i(54),
base100G-LR4(55),
base100G-SR4(56),
base10G-BX10-U(57),
base10G-BX10-D(58),
base1000-ZR-CWDM(59),
base10G-ZR(60),
base10G-BX80-U(61),
base10G-BX80-D(62),
base1000-BX80-U(63),
base1000-BX80-D(64),
base100G-ER4(65),
cPlusPlusI(66)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"indicate basic type of the specified SFP(+)/XFP/QSFP(+).
ALCATEL NOTE:
ACCESS: NA
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NA
DESCR: NA
"
::= { sfpInventoryEntry 13}
-- ==================================================================
-- | End of SFP Inventory Table |
-- ==================================================================
sfpRSSIProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF SfpPonRSSIProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This object contains a table for defining RSSI for SFP/XFP/CFP4 by operator, which could be used for all NT/NTIO cards and DSL/GPON/EPON line cards.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP"
::= { sfpMIB 7 }
sfpRSSIProfileEntry OBJECT-TYPE
SYNTAX SfpPonRSSIProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the sfpRSSIProfileTable.
Row creation : an entry is created when operator creates SfpRSSI profile.
Row deletion : an entry is created when operator deletes SfpRSSI profile.
ALCATEL NOTE:
SUPPORT: YES"
INDEX {sfpRSSIProfileIndex}
::= {sfpRSSIProfileTable 1}
SfpPonRSSIProfileEntry ::=
SEQUENCE {
sfpRSSIProfileIndex AsamProfileIndex,
sfpRSSIProfileName DisplayString,
sfpRSSIProfileRefCount AsamProfileRefCount,
sfpRSSIRowStatus RowStatus,
sfpRSSIRxPowerAlmLow INTEGER,
sfpRSSIRxPowerAlmHigh INTEGER,
sfpRSSIRxPowerWarnLow INTEGER,
sfpRSSIRxPowerWarnHigh INTEGER,
sfpRSSITxPowerAlmLow INTEGER,
sfpRSSITxPowerAlmHigh INTEGER,
sfpRSSITxPowerWarnLow INTEGER,
sfpRSSITxPowerWarnHigh INTEGER,
sfpRSSITemperatureAlmLow INTEGER,
sfpRSSITemperatureAlmHigh INTEGER,
sfpRSSITemperatureWarnLow INTEGER,
sfpRSSITemperatureWarnHigh INTEGER,
sfpRSSIBiasAlmLow INTEGER,
sfpRSSIBiasAlmHigh INTEGER,
sfpRSSIBiasWarnLow INTEGER,
sfpRSSIBiasWarnHigh INTEGER,
sfpRSSIVoltageAlmLow INTEGER,
sfpRSSIVoltageAlmHigh INTEGER,
sfpRSSIVoltageWarnLow INTEGER,
sfpRSSIVoltageWarnHigh INTEGER,
sfpRSSIExtRxPowerAlmLow INTEGER,
sfpRSSIExtRxPowerAlmHigh INTEGER,
sfpRSSIExtRxPowerWarnLow INTEGER,
sfpRSSIExtRxPowerWarnHigh INTEGER,
sfpRSSIExtTxPowerAlmLow INTEGER,
sfpRSSIExtTxPowerAlmHigh INTEGER,
sfpRSSIExtTxPowerWarnLow INTEGER,
sfpRSSIExtTxPowerWarnHigh INTEGER,
sfpRSSIExtBiasAlmLow INTEGER,
sfpRSSIExtBiasAlmHigh INTEGER,
sfpRSSIExtBiasWarnLow INTEGER,
sfpRSSIExtBiasWarnHigh INTEGER,
sfpRssiProfileType INTEGER,
sfpRSSIExtTemperatureAlmLow INTEGER,
sfpRSSIExtTemperatureAlmHigh INTEGER,
sfpRSSIExtTemperatureWarnLow INTEGER,
sfpRSSIExtTemperatureWarnHigh INTEGER
}
sfpRSSIProfileIndex OBJECT-TYPE
SYNTAX AsamProfileIndex
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This object is the index to the sfpSfpRSSIProfileTable.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: NO
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
"
::= { sfpRSSIProfileEntry 1}
sfpRSSIProfileName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The corresponding name for a given profile id.
The name corresponding to the ProfileId must also be unique.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: NO
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA"
::= {sfpRSSIProfileEntry 2}
sfpRSSIProfileRefCount OBJECT-TYPE
SYNTAX AsamProfileRefCount
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Indicates the number of entities using this profile. If the
reference count is greater than 0, then this profile is 'in use',
and may NOT be deleted. If the value is 0, then this profile is
'not in use', and can be deleted.
ALCATEL NOTE:
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NA INSRVMOD: NO
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA "
::= { sfpRSSIProfileEntry 3}
sfpRSSIRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create a new row or delete an row.
ALCATEL NOTE:
ACCESS: NA usage: MAND
persistent: YES INSRVMOD:YES
RANGE:1,4,6 DEFVALUE: NA
UNITS: NA SPARSE: NA "
::= { sfpRSSIProfileEntry 4}
sfpRSSIRxPowerAlmLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for alarm OLTRXPWLO. if RX power is less than this value, then
alarm OLTRXPWLO will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network lane.
For ONT Profile, 0.5dBm means using ont internal policy.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -127000..8163 DEFVALUE: 0
UNITS: 0.001dBm SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 5 }
sfpRSSIRxPowerAlmHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTRXPWHI. When RX power is larger than this value,
then alarm OLTRXPWHI will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network lane.
For ONT Profile, 0.5dBm means using ont internal policy.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -127000..8163 DEFVALUE: 0
UNITS: 0.001dBm SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 6 }
sfpRSSIRxPowerWarnLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTRXPWLOWARN. When Rx power is less than this value,
alarm OLTRXPWLOWARN will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network lane.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NO INSRVMOD: NA
RANGE: -127000..8163 DEFVALUE: 0
UNITS: 0.001dBm SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 7 }
sfpRSSIRxPowerWarnHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTRXPWHIWARN. When Rx power is larger than this value,
alarm OLTRXPWHIWARN will be reported.
For CFP4, there is no module level 'RxPower' monitor,this is the threshold for network lane.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -127000..8163 DEFVALUE: 0
UNITS: 0.001dBm SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 8 }
sfpRSSITxPowerAlmLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTTXPWLO. When Tx power is less than this value,
alarm OLTTXPWLO will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network lane.
For ONT Profile, -63.5dBm means using ONT internal policy.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -63500..63500 DEFVALUE: 0
UNITS: 0.001dBm SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 9 }
sfpRSSITxPowerAlmHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTTXPWHI. When Tx power is larger than this value,
alarm OLTTXPWHI will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network lane.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -63500..63500 DEFVALUE: 0
UNITS: 0.001dBm SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 10 }
sfpRSSITxPowerWarnLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTTXPWLOWARN. When Tx power is less than this value,
alarm OLTTXPWLOWARN will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network lane.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -63500..63500 DEFVALUE: 0
UNITS: 0.001dBm SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 11 }
sfpRSSITxPowerWarnHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTTXPWHIWARN. When Tx power is larger than this value,
alarm OLTTXPWHIWARN will be reported.
For CFP4, there is no module level 'TxPower' monitor,this is the threshold for network lane.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -63500..63500 DEFVALUE: 0
UNITS: 0.001dBm SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 12 }
sfpRSSITemperatureAlmLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTTEMPLO. when temperature is less than this value, then
alarm OLTTEMPLO will be reported.
For CFP4, this is the module level threshold.The network lane level threshold is indicated by sfpRSSIExtTemperatureAlmLow.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -32768..32768 DEFVALUE: 0
UNITS: 1/256 Celsius SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 13 }
sfpRSSITemperatureAlmHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTTEMPHI. When temperature is larger than this value,
alarm OLTTEMPHI will be reported.
For CFP4, this is the module level threshold.The network lane level threshold is indicated by sfpRSSIExtTemperatureAlmHigh.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -32768..32768 DEFVALUE: 0
UNITS: 1/256 Celsius SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 14 }
sfpRSSITemperatureWarnLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTTEMPLOWARN. when temperature is less than this value, then
alarm OLTTEMPLOWARN will be reported.
For CFP4, this is the module level threshold.The network lane level threshold is indicated by sfpRSSIExtTemperatureWarnLow.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -32768..32768 DEFVALUE: 0
UNITS: 1/256 Celsius SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 15 }
sfpRSSITemperatureWarnHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTTEMPHIWARN. When temperature is larger than this value,
alarm OLTTEMPHIWARN will be reported.
For CFP4, this is the module level threshold.The network lane level threshold is indicated by sfpRSSIExtTemperatureWarnHigh
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -32768..32768 DEFVALUE: 0
UNITS: 1/256 Celsius SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 16 }
sfpRSSIBiasAlmLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTBIASLO. when bias is less than this value, then
alarm OLTBIASLO will be reported.
For CFP4, this is the module level threshold.The network lane level threshold is indicated by sfpRSSIExtBiasAlmLow.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: 0..131000 DEFVALUE: 0
UNITS: 2uA SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 17 }
sfpRSSIBiasAlmHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTBIASHI. when bias is larger than this value, then
alarm OLTBIASHI will be reported.
For CFP4, this is the module level threshold.The network lane level threshold is indicated by sfpRSSIExtBiasAlmHigh.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: 0..131000 DEFVALUE: 0
UNITS: 2uA SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 18 }
sfpRSSIBiasWarnLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTBIASLOWARN. when bias is less than this value, then
alarm OLTBIASLOWARN will be reported.
For CFP4, this is the module level threshold.The network lane level threshold is indicated by sfpRSSIExtBiasWarnLow.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: 0..131000 DEFVALUE: 0
UNITS: 2uA SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 19 }
sfpRSSIBiasWarnHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTBIASHIWARN. when bias is larger than this value, then
alarm OLTBIASHIWARN will be reported.
For CFP4, this is the module level threshold.The network lane level threshold is indicated by sfpRSSIExtBiasWarnHigh.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: 0..131000 DEFVALUE: 0
UNITS: 2uA SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 20 }
sfpRSSIVoltageAlmLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTVOLLO. when voltage is less than this value, then
alarm OLTVOLLO will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: 0..65500 DEFVALUE: 0
UNITS: 100uV SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 21 }
sfpRSSIVoltageAlmHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTVOLHI. when voltage is larger than this value, then
alarm OLTVOLHI will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: 0..65500 DEFVALUE: 0
UNITS: 100uV SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 22 }
sfpRSSIVoltageWarnLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTVOLLOWARN. when voltage is less than this value, then
alarm OLTVOLLOWARN will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: 0..65500 DEFVALUE: 0
UNITS: 100uV SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 23 }
sfpRSSIVoltageWarnHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTVOLHIWARN. when voltage is larger than this value, then
alarm OLTVOLHIWARN will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: 0..65500 DEFVALUE: 0
UNITS: 100uV SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 24 }
sfpRSSIExtRxPowerAlmLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for alarm OLTRXPWLO. if RX power is less than this value, then
alarm OLTRXPWLO will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -127000..8163 DEFVALUE: 0
UNITS: 0.001dBm SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 25 }
sfpRSSIExtRxPowerAlmHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTRXPWHI. When RX power is larger than this value,
then alarm OLTRXPWHI will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -127000..8163 DEFVALUE: 0
UNITS: 0.001dBm SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 26 }
sfpRSSIExtRxPowerWarnLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTRXPWLOWARN. When Rx power is less than this value,
alarm OLTRXPWLOWARN will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -127000..8163 DEFVALUE: 0
UNITS: 0.001dBm SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 27 }
sfpRSSIExtRxPowerWarnHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for OLTRXPWHIWARN. When Rx power is larger than this value,
alarm OLTRXPWHIWARN will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -127000..8163 DEFVALUE: 0
UNITS: 0.001dBm SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 28 }
sfpRSSIExtTxPowerAlmLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for EXTOLTTXPWLO. When Tx power is less than this value,
alarm EXTOLTTXPWLO will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -63500..63500 DEFVALUE: 0
UNITS: 0.001dBm SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 29 }
sfpRSSIExtTxPowerAlmHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for EXTOLTTXPWHI. When Tx power is larger than this value,
alarm EXTOLTTXPWHI will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -63500..63500 DEFVALUE: 0
UNITS: 0.001dBm SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 30 }
sfpRSSIExtTxPowerWarnLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for EXTOLTTXPWLOWARN. When Tx power is less than this value,
alarm EXTOLTTXPWLOWARN will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -63500..63500 DEFVALUE: 0
UNITS: 0.001dBm SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 31 }
sfpRSSIExtTxPowerWarnHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this object indicates the threshold for EXTOLTTXPWHIWARN. When Tx power is larger than this value,
alarm EXTOLTTXPWHIWARN will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -63500..63500 DEFVALUE: 0
UNITS: 0.001dBm SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 32 }
sfpRSSIExtBiasAlmLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASLO. when bias is less than this value, then
alarm EXTOLTBIASLO will be reported.
For CFP4,this object indicates the threshold of network lane for OLTBIASLO,when laser bias of network lane is less
than this value,alarm OLTBIASLO will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: 0..131000 DEFVALUE: 0
UNITS: 2uA SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 33 }
sfpRSSIExtBiasAlmHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASHI. when bias is larger than this value, then
alarm EXTOLTBIASHI will be reported.
For CFP4,this object indicates the threshold of network lane for OLTBIASHI,when laser bias of network lane is larger
than this value,alarm OLTBIASHI will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: 0..131000 DEFVALUE: 0
UNITS: 2uA SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 34 }
sfpRSSIExtBiasWarnLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASLOWARN. when bias is less than this value, then
alarm EXTOLTBIASLOWARN will be reported.
For CFP4,this object indicates the threshold of network lane for OLTBIASLOWARN,when laser bias of network lane is less
than this value,alarm OLTBIASLOWARN will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: 0..131000 DEFVALUE: 0
UNITS: 2uA SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 35 }
sfpRSSIExtBiasWarnHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For 10G EPON SFPs,this object indicates the threshold for EXTOLTBIASHIWARN. when bias is larger than this value, then
alarm EXTOLTBIASHIWARN will be reported.
For CFP4,this object indicates the threshold of network lane for OLTBIASHIWARN,when laser bias of network lane is larger
than this value,alarm OLTBIASHIWARN will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: 0..131000 DEFVALUE: 0
UNITS: 2uA SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 36 }
sfpRssiProfileType OBJECT-TYPE
SYNTAX INTEGER
{
olt(1),
ont(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"RSSI profile type"
::= { sfpRSSIProfileEntry 37 }
sfpRSSIExtTemperatureAlmLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates the laser temperature low alarm threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is less than this value,alarm OLTTEMPLO will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -32768..32768 DEFVALUE: 0
UNITS: 1/256 Celsius SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 38 }
sfpRSSIExtTemperatureAlmHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates the laser temperature high alarm threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is large than this value,alarm OLTTEMPHI will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -32768..32768 DEFVALUE: 0
UNITS: 1/256 Celsius SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 39 }
sfpRSSIExtTemperatureWarnLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates the laser temperature low warning threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is less than this value,alarm OLTTEMPLOWARN will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -32768..32768 DEFVALUE: 0
UNITS: 1/256 Celsius SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 40 }
sfpRSSIExtTemperatureWarnHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates the laser temperature high warning threshold of network lane for CFP4.
When any network lane's laser temperature of CFP4 is large than this value,alarm OLTTEMPHIWARN will be reported.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: YES INSRVMOD: YES
RANGE: -32768..32768 DEFVALUE: 0
UNITS: 1/256 Celsius SPARSE: NA
DESCR: NA "
::= { sfpRSSIProfileEntry 41 }
sfpRSSIProfileIndexNext OBJECT-TYPE
SYNTAX AsamNextProfileIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains an appropriate value to be used for
sfpRSSIProfileIndex when creating entries in the
sfpRSSIProfileTable.
The value 0 indicates that no unassigned entries are available. To
obtain the next index value for a new entry, the
manager issues a management protocol retrieval operation to obtain the
current value of this object. After each retrieval, the agent should
modify the value to the next unassigned index.
ALCATEL NOTE:
ACCESS: NA usage: NA
persistent: NA INSRVMOD:NA
RANGE:NA DEFVALUE: NA
UNITS: NA SPARSE: NA "
::= {sfpMIB 8 }
sfpRSSIProfileMaxIndex OBJECT-TYPE
SYNTAX AsamMaxProfileIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object represents the maximum number of
sfpRSSIProfiles that can be created. The object
sfpRSSIProfileMaxIndex will have values ranging
from 0 to the value represented by this object.
ALCATEL NOTE:
ACCESS: NA usage: NA
persistent: NA INSRVMOD:NA
RANGE:NA DEFVALUE: NA
UNITS: NA SPARSE: NA "
::= {sfpMIB 9 }
-- ==================================================================
-- | Start of 2E1/DS1 SFP Clock-Reset manager Table |
-- ==================================================================
dsx1ClockConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dsx1ClockConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the 2E1/DS1 SFP Clock configuration
information.
ALCATEL NOTE:
TABLESIZE: 10
"
::= {sfpMIB 10}
dsx1ClockConfigEntry OBJECT-TYPE
SYNTAX Dsx1ClockConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry consists of a list of 2E1/DS1 SFP general configuration parameters."
INDEX {dsx1SfpClkConfigLogicalSlot, dsx1SfpClkConfigFaceplateNumber}
::= {dsx1ClockConfigTable 1}
Dsx1ClockConfigEntry ::=
SEQUENCE {
dsx1SfpClkConfigLogicalSlot INTEGER,
dsx1SfpClkConfigFaceplateNumber INTEGER,
dsx1SfpClkConfigSyncSource INTEGER,
dsx1SfpClkConfigDegradeAlarm INTEGER,
dsx1SfpClkConfigSoftwareReset INTEGER,
dsx1SfpClkAlarmState INTEGER,
dsx1SfpClkConfigClkControlSignal INTEGER,
dsx1SfpClkConfigClkSource INTEGER,
dsx1SfpClkRowStatus RowStatus,
dsx1SfpClkConfState INTEGER
}
dsx1SfpClkConfigLogicalSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the first index of the dsx1ClockConfig Table.
Normally, this object contains the Logical Slot ID (as defined in
the Equipment MIB) of the card which has the SFP cage of interest
on its faceplate.
If that card does not have a Logical Slot ID, the Logical Slot ID
of a related card is used.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: 1..65535
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1ClockConfigEntry 1}
-- Define the second (and final) index column of the dsx1ClockConfigTable.
dsx1SfpClkConfigFaceplateNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the second index of the dsx1ClockConfigTable.
It is the number of the SFP cage, as shown on the card
faceplate. If the faceplate cage number is zero,
sfpDiagSfpFaceplateNumber=0 is used (i.e. zero is not a
special case).
For an SFP cage, it is the faceplate number of the SFP cage (e.g. 1).
For an XFP cage, it is 256 + (the faceplate number of the XFP cage). For
example 257.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: 0..511
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1ClockConfigEntry 2}
dsx1SfpClkConfigSyncSource OBJECT-TYPE
SYNTAX INTEGER {
tributary1 (1),
tributary2 (2),
serdes (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Select as sync source between clock recovered from Serdes or Tributary clock.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 1..3
DEFVALUE: 3
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1ClockConfigEntry 3}
dsx1SfpClkConfigDegradeAlarm OBJECT-TYPE
SYNTAX INTEGER {
disable (0),
enable (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable degrade alarm on los pin.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 1
DEFVALUE: 1
UNITS: NA
SPARSE: NO
DESCR: Only Default value enable allowed in R4.4x
"
::= {dsx1ClockConfigEntry 4}
dsx1SfpClkConfigSoftwareReset OBJECT-TYPE
SYNTAX INTEGER {
softwareReset (0),
noSoftwareReset (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"noSoftwareReset (default value), this is the value that is returned when read the attribute.
softwareReset, this is the value that can be set by the manager. This value will trigger a software reset.
.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 1
DEFVALUE: 1
UNITS: NA
SPARSE: NO
DESCR: Only Default value allowed in R4.4x
"
::= {dsx1ClockConfigEntry 5}
dsx1SfpClkAlarmState OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" serdesFailAlarm (1):Failure of the SERDES clock alarm (active high)
tributary1FailAlarm (2): Failure alarm: the tributary 1 clock is not present (active high)
tributary2FailAlarm (4):Failure alarm: the tributary 2 clock is not present (active high)
tributaryFailAlarm (8):Sync fail alarm: all the selected tribs in LOS
aisSyncFail(16):Sync fail alarm: AIS (Alarm Indication signal) on the tributary selected as sync source(active high)
lofSyncFail(32):Sync fail alarm: LOF(loss of Framing) on the tributary selected as sync source(active high)
losSyncFail(64):Sync fail alarm: LOS (loss of signal) on the tributary selected as sync source(active high)
degradeAlarm(128):
Alarm state bitmap.
bit 0: high value indicates serdesFailAlarm
bit 1: high value indicates tributary1FailAlarm
bit 2: high value indicates tributary2FailAlarm
bit 3: high value indicates tributaryFailAlarm
bit 4: high value indicates AIS SyncFail
bit 5: high value indicates LOF SyncFail
bit 6: high value indicates lOS SyncFail
bit 7: high value indicates degradeAlarm
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: Not Supported
"
::= {dsx1ClockConfigEntry 6}
dsx1SfpClkConfigClkControlSignal OBJECT-TYPE
SYNTAX INTEGER {
squarewave (0),
pll (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SEL_LOC_OR_SRC. Control signal to select the VTCXO control signal
(PWM) between DPLL output and a ~4MHZ square wave signal
generated dividing the same system clock.
0 Square wave generated from system clock.
1 Control signal from PLL(Phase locked loop).
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0,1
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1ClockConfigEntry 7}
dsx1SfpClkConfigClkSource OBJECT-TYPE
SYNTAX INTEGER {
clk125mloc (0),
clk125mrec (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CLK_SOURCE_SEL. This bit is used to select between local VTCXO and
CLOCK FROM SERDES as synchronization source for the signals:
CK_EN-25M and CK-EN-ETSI-ANSI
1 CK-125M-REC
0 CK-125M-LOC
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 1
DEFVALUE: 1
UNITS: NA
SPARSE: NO
DESCR: Only Default value allowed in R4.4x
"
::= {dsx1ClockConfigEntry 8}
dsx1SfpClkRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create a new row or delete an
existing row in this table. The possible valid values are:
(1) active
(4) createdAndGo
(6) destroy
To create an entry in this table, this object should be set to
CreateAndGo. To delete an entry from this table, RowStatus
should be set to Destroy value by the SNMP manager.
ALCATEL NOTE:
ACCESS: NA
USAGE: MAND
PERSIST: NO
INSRVMOD:NA
RANGE:1 | 4 | 6 -- active (1), createAndGo (4), destroy (6)
DEFVALUE: NA
UNITS: NA
SPARSE: NA "
::= { dsx1ClockConfigEntry 9}
dsx1SfpClkConfState OBJECT-TYPE
SYNTAX INTEGER (0..31)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Clock Configuration state bitmap.
bit 0: high value indicates SyncSource Configuration fail
bit 1: high value indicates DegradeAlarm Configuration fail
bit 2: high value indicates SoftwareReset Configuration fail
bit 3: high value indicates ClkControlSignal Configuration fail
bit 4: high value indicates ClkSource Configuration fail
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 0..31
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1ClockConfigEntry 10}
-- ==================================================================
-- | Start of 2E1/DS1 SFP General Configuration Table |
-- ==================================================================
dsx1GeneralConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dsx1GeneralConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the 2E1/DS1 SFP General configuration
information.
ALCATEL NOTE:
TABLESIZE: 11
"
::= {sfpMIB 11}
dsx1GeneralConfigEntry OBJECT-TYPE
SYNTAX Dsx1GeneralConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry consists of a list of 2E1/DS1 SFP general configuration parameters.
A row entry is created or deleted in this table when the corresponding
operation on a row is done in dsx1ClockConfigTable"
AUGMENTS { dsx1ClockConfigEntry }
::= {dsx1GeneralConfigTable 1}
Dsx1GeneralConfigEntry ::=
SEQUENCE {
dsx1SfpReadyStatus INTEGER,
dsx1SfpGenConfigMarket INTEGER,
dsx1SfpGenConfigTributary1 INTEGER,
dsx1SfpGenConfigTributary2 INTEGER,
dsx1SfpGenConfigSERDES INTEGER,
dsx1SfpGenConfigSERDESLoopBack INTEGER,
dsx1SfpGenConfigSGMIILocalLoopBack INTEGER,
dsx1SfpGenConfigSGMIIRemoteLoopBack INTEGER,
dsx1SfpGenConfigLIUReset INTEGER,
dsx1SfpGenConfigLIUHighImpedence INTEGER,
dsx1SfpGenConfigState INTEGER
}
dsx1SfpReadyStatus OBJECT-TYPE
SYNTAX INTEGER {
notready (0),
ready (1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the host SFP status.
ready (0):
notready (1):
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: No
INSRVMOD: NA
RANGE: 0,1
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: SFP Ready state
"
::= {dsx1GeneralConfigEntry 1}
dsx1SfpGenConfigMarket OBJECT-TYPE
SYNTAX INTEGER {
etsi (0),
ansi (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" ETSI (0): used for ETSI Market for E1 Lines.
ANSI (1): used for ANSI Market for T1/DS1 Lines.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: ETSI vs ANSI selection
Only etsi value allowed in R4.4x
"
::= {dsx1GeneralConfigEntry 2}
dsx1SfpGenConfigTributary1 OBJECT-TYPE
SYNTAX INTEGER {
disable (0),
enable (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable Tributary1.
disable (0): disable Tributary 1.
enable (1): enable Tributary 1.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: Not Supported
"
::= {dsx1GeneralConfigEntry 3}
dsx1SfpGenConfigTributary2 OBJECT-TYPE
SYNTAX INTEGER {
disable (0),
enable (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable Tributary2.
disable (0): Disable Tributary 2.
enable (1): enable Tributary 0.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: Not supported
"
::= {dsx1GeneralConfigEntry 4}
dsx1SfpGenConfigSERDES OBJECT-TYPE
SYNTAX INTEGER {
disable (0),
enable (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" disable (0): Disable SERDES device.
enable (1): enable SERDES device.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 1
DEFVALUE: 1
UNITS: NA
SPARSE: NO
DESCR: Only Default value allowed in R4.4x
"
::= {dsx1GeneralConfigEntry 5}
dsx1SfpGenConfigSERDESLoopBack OBJECT-TYPE
SYNTAX INTEGER {
disable (0),
enable (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable of SERDES device. When held low, the SERDES
device enters in an ultralow-power idle state and
the transmitter output pins are set to high impedance
state
.
disable (0): Disable SERDES LoopBack.
enable (1): enable SERDES LoopBack.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0,1
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: Not Supported
When held high the loopback function on the SERDES
is enabled, the transmitter serial data is directly
routed to the inputs of the receiver.
"
::= {dsx1GeneralConfigEntry 6}
dsx1SfpGenConfigSGMIILocalLoopBack OBJECT-TYPE
SYNTAX INTEGER {
disable (0),
enable (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" disable (0): SGMII local loopback disable towards CESoP.
enable (1): SGMII local loopback enable towards CESoP.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0,1
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: Not Supported
"
::= {dsx1GeneralConfigEntry 7}
dsx1SfpGenConfigSGMIIRemoteLoopBack OBJECT-TYPE
SYNTAX INTEGER {
disable (0),
enable (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" disable (0): SGMII remote loopback disable towards serdes.
enable (1): SGMII remote loopback enable towards serdes.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0,1
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: Not Supported
"
::= {dsx1GeneralConfigEntry 8}
dsx1SfpGenConfigLIUReset OBJECT-TYPE
SYNTAX INTEGER {
reset (0),
noReset (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" reset (0): A low level value (for more than 100ns) forces the LIU to reset state.
This is the value that can be set by the manager. This value will trigger a LIU reset.
noReset (1): This is the value that is returned when read the attribute.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 1
DEFVALUE: 1
UNITS: NA
SPARSE: NO
DESCR: Only Default value allowed in R4.4x
"
::= {dsx1GeneralConfigEntry 9}
dsx1SfpGenConfigLIUHighImpedence OBJECT-TYPE
SYNTAX INTEGER {
low (0),
high (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" low (0):
high (1): A high level value places all transmitter drivers of the LIU in high Impedence state.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0.1
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1GeneralConfigEntry 10}
dsx1SfpGenConfigState OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" General Configuration state bitmap.
bit 0: high value indicates Market Configuration fail
bit 1: high value indicates Tributory1 Configuration fail
bit 2: high value indicates Tributory2 Configuration fail
bit 3: high value indicates SERDES Configuration fail
bit 4: high value indicates SERDES local loopback Configuration fail
bit 5: high value indicates SGMII local loopback Configuration fail
bit 6: high value indicates SGMII remote loopback Configuration fail
bit 7: high value indicates LIU Highimpedence Configuration fail
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 0..255
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1GeneralConfigEntry 11}
-- ==================================================================
-- | Start of 2E1/DS1 SFP dsx1 TDM interface Table |
-- ==================================================================
dsx1PWTDMInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dsx1PWTDMInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the 2E1/DS1 SFP PW TDM interface configuration
information.
ALCATEL NOTE:
TABLESIZE: 4
"
::= {sfpMIB 12}
dsx1PWTDMInterfaceEntry OBJECT-TYPE
SYNTAX Dsx1PWTDMInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry consists of a list of 2E1/DS1 SFP TDM Interface parameters.
A row entry is created or deleted in this table when the corresponding
operation on a row is done in dsx1ClockConfigTable"
AUGMENTS { dsx1ClockConfigEntry }
::= {dsx1PWTDMInterfaceTable 1}
Dsx1PWTDMInterfaceEntry ::=
SEQUENCE {
dsx1PWTDMInterfaceMarket INTEGER,
dsx1PWTDMInterfaceWindowLength INTEGER,
dsx1PWTDMInterfaceWindowNumber INTEGER,
dsx1PWTDMInterfaceConfState INTEGER
}
dsx1PWTDMInterfaceMarket OBJECT-TYPE
SYNTAX INTEGER {
etsi (0),
ansi (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"etsi(0): used for ETSI Market for E1 Lines.
ansi (1): used for ANSI Market for T1/DS1 Lines.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0,1
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: ETSI vs ANSI selection
Only etsi value is allowed in R4.4x
"
::= {dsx1PWTDMInterfaceEntry 1}
dsx1PWTDMInterfaceWindowLength OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Window length measured in unit of 10 ms.
Eg. wndow_len = 10 means window is 10*10 = 100ms long
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0..255
DEFVALUE: 10
UNITS: milliseconds
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMInterfaceEntry 2}
dsx1PWTDMInterfaceWindowNumber OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Consecutively detected window number.
Eg. wndow_num = 20 means if packets lost in consecutive 20
windows, then assert CESalarm (Circuit emulation service alarm); otherwise, deassert CESalarm
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0...255
DEFVALUE: 20
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMInterfaceEntry 3}
dsx1PWTDMInterfaceConfState OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" PWTDM Interface Configuration state bitmap.
bit 0: high value indicates Market Configuration fail
bit 1: high value indicates Window Length Configuration fail
bit 2: high value indicates Window Number Configuration fail
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 0..7
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMInterfaceEntry 4}
-- ==================================================================
-- | Start of 2E1/DS1 SFP dsx1 TDMoP configuration Table |
-- ==================================================================
dsx1PWTDMConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dsx1PWTDMConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the 2E1/DS1 SFP TDMoP pseudowire configuration
information.
ALCATEL NOTE:
TABLESIZE: 19
"
::= {sfpMIB 13}
dsx1PWTDMConfigEntry OBJECT-TYPE
SYNTAX Dsx1PWTDMConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry consists of a list of 2E1/DS1 SFP TDMoP parameters."
INDEX {dsx1SfpPWTDMLogicalSlot, dsx1SfpPWTDMFaceplateNumber, dsx1PWTDMTributaryIndex}
::= {dsx1PWTDMConfigTable 1}
Dsx1PWTDMConfigEntry ::=
SEQUENCE {
dsx1SfpPWTDMLogicalSlot INTEGER,
dsx1SfpPWTDMFaceplateNumber INTEGER,
dsx1PWTDMTributaryIndex INTEGER,
dsx1PWTDMChannel INTEGER,
dsx1PWTDMRtpMode INTEGER,
dsx1PWTDMPacketLength INTEGER,
dsx1PWTDMSourceAddressPointer INTEGER,
dsx1PWTDMSourceAddress MacAddress,
dsx1PWTDMDestinationMac MacAddress,
dsx1PWTDMPriority INTEGER,
dsx1PWTDMVlanId INTEGER,
dsx1PWTDMECIDEthToTDM INTEGER,
dsx1PWTDMECIDTDMToEth INTEGER,
dsx1PWTDJitterBufferSize INTEGER,
dsx1PWTDMConsequenceNumber INTEGER,
dsx1PWTDMClock INTEGER,
dsx1PWTDMFPGAVersion DisplayString,
dsx1PWTDMRowStatus RowStatus,
dsx1PWTDMConfState INTEGER
}
dsx1SfpPWTDMLogicalSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the first index of the dsx1PWTDMConfig Table.
Normally, this object contains the Logical Slot ID (as defined in
the Equipment MIB) of the card which has the SFP cage of interest
on its faceplate.
If that card does not have a Logical Slot ID, the Logical Slot ID
of a related card is used.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: 1..65535
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMConfigEntry 1}
-- Define the second index column of the dsx1PWTDMConfig Table.
dsx1SfpPWTDMFaceplateNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the second index of the dsx1PWTDMConfig Table.
It is the number of the SFP cage, as shown on the card
faceplate. If the faceplate cage number is zero,
sfpDiagSfpFaceplateNumber=0 is used (i.e. zero is not a
special case).
For an SFP cage, it is the faceplate number of the SFP cage (e.g. 1).
For an XFP cage, it is 256 + (the faceplate number of the XFP cage). For
example 257.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: 0..511
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMConfigEntry 2}
-- Define the third (and final) index column of the dsx1PWTDMConfig Table.
dsx1PWTDMTributaryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the third index of the dsx1PWTDMConfigTable.
Normally, this object used to select the tributary selecton (1 or 2 or 3) of the 2xE1/DS1 FPGA
where value 1 selects tributary 1, value 2 selects tributary 2 and value 3 selects both the tributories
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: 1,2,3
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMConfigEntry 3}
dsx1PWTDMChannel OBJECT-TYPE
SYNTAX INTEGER {
close (0),
open (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Chan_ena
0: close this channel;
1: open this channel
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0,1
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMConfigEntry 4}
dsx1PWTDMRtpMode OBJECT-TYPE
SYNTAX INTEGER {
acr (0),
dcr (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Rtp_present
0: rtp is not present, configure to ACR mode;
1: rtp is present, configure DCR mode
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0,1
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: this attribute is NOT supported in ISAM R4.4.x
"
::= {dsx1PWTDMConfigEntry 5}
dsx1PWTDMPacketLength OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Config packet length bits (13:0)
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0...16382
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMConfigEntry 6}
dsx1PWTDMSourceAddressPointer OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SA select 2 bits field (TDM2Eth)
00 - Select Source Address 0
01 - Select Source Address 1
10 - Select Source Address 2
11 - Select Source Address 3
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0...3
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR:This is not supported in the R4.4x
Source address pointer is handled internally in the sfp hardware.
"
::= {dsx1PWTDMConfigEntry 7}
dsx1PWTDMSourceAddress OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"MAC SA for each tributary
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMConfigEntry 8}
dsx1PWTDMDestinationMac OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"MAC DA for each tributary
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMConfigEntry 9}
dsx1PWTDMPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"802.1p 3 bits field.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0...7
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMConfigEntry 10}
dsx1PWTDMVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Vlan ID.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0...4095
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMConfigEntry 11}
dsx1PWTDMECIDEthToTDM OBJECT-TYPE
SYNTAX INTEGER (0..1048575)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"ECID (Emulated Circuit Identifer) 20 bit field Eth2Tdm.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0..1048575
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMConfigEntry 12}
dsx1PWTDMECIDTDMToEth OBJECT-TYPE
SYNTAX INTEGER (0..1048575)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"ECID (Emulated Circuit Identifer) 20 bit field Tdm2Eth.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0..1048575
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMConfigEntry 13}
dsx1PWTDJitterBufferSize OBJECT-TYPE
SYNTAX INTEGER (0..1023)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Jitter Buffer Queue size. Actual size + configurable size + 1. Example configuring size of 7 mean buffer size of 8 packets
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE:0..1023
DEFVALUE: NA
UNITS: Packets
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMConfigEntry 14}
dsx1PWTDMConsequenceNumber OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"New Sequence number
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0...7
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMConfigEntry 15}
dsx1PWTDMClock OBJECT-TYPE
SYNTAX INTEGER {
differentialMode (0),
loopbackMode (1),
referenceNodeTimeMode(2),
addaptiveMode(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TDM_clock_strategy.
00: differential mode;
01: loop back mode;
10:reference Node time mode;
11: adaptive mode.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 2
DEFVALUE: 2
UNITS: NA
SPARSE: NO
DESCR: only referenceNodeTimeMode is supported in R4.4x
"
::= {dsx1PWTDMConfigEntry 16}
dsx1PWTDMFPGAVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"FPGA software version.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMConfigEntry 17}
dsx1PWTDMRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create a new row or delete an
existing row in this table. The possible valid values are:
(1) active
(4) createdAndGo
(6) destroy
To create an entry in this table, this object should be set to
CreateAndGo. To delete an entry from this table, RowStatus
should be set to Destroy value by the SNMP manager.
ALCATEL NOTE:
ACCESS: NA
USAGE: MAND
PERSIST: NO
INSRVMOD:NA
RANGE:1 | 4 | 6 -- active (1), createAndGo (4), destroy (6)
DEFVALUE: NA
UNITS: NA
SPARSE: NA "
::= { dsx1PWTDMConfigEntry 18}
dsx1PWTDMConfState OBJECT-TYPE
SYNTAX INTEGER (0..8191)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" PWTDM Configuration state bitmap.
bit 0: high value indicates Channel Configuration fail
bit 1: high value indicates RTP modeSourceAddress PointerConfiguration fail
bit 2: high value indicates Packet length Configuration fail
bit 3: high value indicates SourceAddress Pointer Configuration fail
bit 4: high value indicates SourceAddress Configuration fail
bit 5: high value indicates Destination Address Configuration fail
bit 6: high value indicates Priority Configuration fail
bit 7: high value indicates vlan index Configuration fail
bit 8: high value indicates ECID eth2tdm Configuration fail
bit 9: high value indicates ECID tdm2eth Configuration fail
bit 10: high value indicates Jitter buffer size Configuration fail
bit 11: high value indicates Consequence number Configuration fail
bit 12: high value indicates clock Configuration fail
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 0..8191
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { dsx1PWTDMConfigEntry 19}
-- ==================================================================
-- | Start of 2E1/DS1 SFP dsx1LineInterfaceUnit Table |
-- ==================================================================
dsx1LineInterfaceUnitTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dsx1LineInterfaceUnitEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the 2E1/DS1 SFP Line Interface Unit configuration
information.
ALCATEL NOTE:
TABLESIZE: 4
"
::= {sfpMIB 14}
dsx1LineInterfaceUnitEntry OBJECT-TYPE
SYNTAX Dsx1LineInterfaceUnitEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry consists of a list of 2E1/DS1 SFP Line Interface Unit parameters.
A row entry is created or deleted in this table when the corresponding
operation on a row is done in dsx1PWTDMConfigTable "
AUGMENTS { dsx1PWTDMConfigEntry }
::= {dsx1LineInterfaceUnitTable 1}
Dsx1LineInterfaceUnitEntry ::=
SEQUENCE {
dsx1SfpLIUConfLine INTEGER,
dsx1SfpLIURxSensitivity INTEGER,
dsx1SfpLIUTxConfig INTEGER,
dsx1SfpLIUConfState INTEGER
}
dsx1SfpLIUConfLine OBJECT-TYPE
SYNTAX INTEGER {
e1 (0),
t1 (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This bit selects the E1 or T1/J1 operation mode globally.
0: E1 mode is selected.
1: T1/J1 mode is selected.
Note: After bit T1/E1 is changed: Before accessing any other regisers a delay of 50us is required to
allow the internal clocking to be settled.
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0,1
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: E1 Mode alone allowed in R4.4x
"
::= {dsx1LineInterfaceUnitEntry 1}
dsx1SfpLIURxSensitivity OBJECT-TYPE
SYNTAX INTEGER {
shorthaul (0),
longhaul (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"0: Receive equalizer off (short haul receiver)
1: Receive equalizer on (long haul receiver)
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0,1
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1LineInterfaceUnitEntry 2}
dsx1SfpLIUTxConfig OBJECT-TYPE
SYNTAX INTEGER (1..12)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"These bits select the transmit template/LBO for short-haul/long-haul applications.
value T1/E1/J1 TCLK Cable Cable range/ Allowable Cable
impedance LBO loss
0001 E1 2.048 MHz 75 O - 0-43 dB
0010 E1 2.048 MHz 120 O - 0-43 dB
0011 DSX1 1.544 MHz 100 O 0-133 ft 0-0.6 dB
0100 DSX1 1.544 MHz 100 O 133-266 ft 0.6-1.2 dB
0101 DSX1 1.544 MHz 100 O 266-399 ft 1.2-1.8 dB
0110 DSX1 1.544 MHz 100 O 399-533 ft 1.8-2.4 dB
0111 DSX1 1.544 MHz 100 O 533-655 ft 2.4-3.0 dB
1000 J1 1.544 MHz 110 O 0-655 ft 0-3.0 dB
1001 DS1 1.544 MHz 100 O 0 dB LBO 0-36 dB
1010 DS1 1.544 MHz 100 O -7.5 dB LBO 0-28.5 dB
1011 DS1 1.544 MHz 100 O -15.0 dB LBO 0-21 dB
1100 DS1 1.544 MHz 100 O 22.5 dB LBO 0-13.5 dB
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 1,2
DEFVALUE: 2
UNITS: NA
SPARSE: NO
DESCR: Values 1 and 2 (E1 alone) allowed in R4.4x
"
::= {dsx1LineInterfaceUnitEntry 3}
dsx1SfpLIUConfState OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Line Interface Unit Configuration state bitmap.
bit 0: high value indicates ConfLine Configuration fail
bit 1: high value indicates Receiver Sensitivity Configuration fail
bit 2: high value indicates Transmitter Configuration fail
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 0..7
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= { dsx1LineInterfaceUnitEntry 4}
-- ==================================================================
-- | Start of 2E1/DS1 SFP dsx1 Framer Table |
-- ==================================================================
dsx1FramerTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dsx1FramerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the 2E1/DS1 SFP Framer configuration.
ALCATEL NOTE:
TABLESIZE: 5
"
::= {sfpMIB 15}
dsx1FramerEntry OBJECT-TYPE
SYNTAX Dsx1FramerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry consists of a list of 2E1/DS1 SFP Framer parameters.
A row entry is created or deleted in this table when the corresponding
operation on a row is done in dsx1PWTDMConfigTable"
AUGMENTS { dsx1PWTDMConfigEntry }
::= {dsx1FramerTable 1}
Dsx1FramerEntry ::=
SEQUENCE {
dsx1FramerGenConfig INTEGER,
dsx1FramerLIU2IWFConfig INTEGER,
dsx1FramerIWF2LIUConfig INTEGER,
dsx1FramerAlarmStatus INTEGER,
dsx1FramerConfState INTEGER
}
dsx1FramerGenConfig OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION "Generai Configuration bitmap.
bit 0: Framed (1) or unframed (0) TDM traffic selection
bit 1: RAI transparent (only for E1)
RAI: Remote Alarm Indication defined in E1 where it is derived from the NFAS A bit.
bit 2: REI transparent (only for E1)
REI: Remote Error Indication usually defined for SDH.
bit 3: Loop toward IWF on LIU side of framer
bit 4: Loop toward LIU on IWF side of framer - Not supported from R4.6x
bit 5: Loop toward LIU on LIU side of framer
bit 6: Loop toward IWF on IWF side of framer - Not supported from R4.6x
bit 7: Extended Super Frame (ESF only for DS1)
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0..127
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: Bit 0 to Bit 6 supported in R4.4x, Bit 4 and Bit 6 are not supported from R4.6x
"
::= {dsx1FramerEntry 1}
dsx1FramerLIU2IWFConfig OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION "Line Interface unit to Inter working Function Configuration bitmap.
bit 0: Enable performance monitoring toward IWF
bit 1: Enable AIS toward IWF
bit 2: Enable RAI (Remote Alarm Indication) toward IWF (only for E1)
bit 3: Enable REI (Remote Error Indication) toward IWF (only for E1)
bit 4: Force RAI (Remote Alarm Indication) toward IWF (only for E1)
bit 5: Force REI(Remote Error Indication) toward IWF (only for E1)
bit 6: Force AIS toward IWF
bit 7: Unused
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0..15
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: only bit 0..3 are supported
"
::= {dsx1FramerEntry 2}
dsx1FramerIWF2LIUConfig OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION "Generai Configuration bitmap.
bit 0: Enable performance monitoring toward LIU
bit 1: Enable AIS toward LIU
bit 2: Enable RAI toward LIU (only for E1)
bit 3: Enable REI toward LIU (only for E1)
bit 4: Force RAI toward LIU (only for E1)
bit 5: Force REI toward LIU for CH1 (only for E1)
bit 6: Force AIS toward LIU for CH1
bit 7: Force E1 multiframe structure generation (payload A5) toward LIU
ALCATEL NOTE:
ACCESS: RW
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0..15
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: only bit 0..3 are supported
"
::= {dsx1FramerEntry 3}
dsx1FramerAlarmStatus OBJECT-TYPE
SYNTAX INTEGER (0..262143)
ACCESS read-only
STATUS mandatory
DESCRIPTION "Alarm Status bitmap. High value indicates an alarm has occured
Bit 0 : CRC4 (Cylic Redundancy check-4) threshold alarm from LIU (only for E1)
Bit 1 : CRC4 (Cylic Redundancy check-4) alarm from LIU (only for E1)
Bit 2 : CRC6 (Cylic Redundancy check-6) alarm from LIU (only for ESF DS1)
Bit 3 : RDI (Remote Defect Alarm) alarm from LIU (only for E1)
Bit 4 : REI (Remote Error Indication) alarm from LIU (only for E1)
Bit 5 : LOMF (Loss of Multi-frame) alarm from LIU
Bit 6 : LOF (loss of framing) alarm from LIU
Bit 7 : LOS (loss of signal) alarm from LIU
Bit 8 : AIS (alarm Indication Signal) alarm from LIU
Bit 9 : CRC4 (Cylic Redundancy check-4) threshold alarm from IWF (only for E1)
Bit 10: CRC4 (Cylic Redundancy check-4) alarm from IWF (only for E1)
Bit 11: CRC6 (Cylic Redundancy check-6) alarm from IWF (only for ESF DS1)
Bit 12: RDI (Remote Defect Alarm) alarm from IWF (only for E1)
Bit 13: REI (Remote Error Indication) alarm from IWF (only for E1)
Bit 14: LOMF (Loss of Multi-frame) alarm from IWF
Bit 15: LOF (loss of framing) alarm from IWF
Bit 16: LOS (loss of signal) alarm from IWF
Bit 17: AIS (alarm Indication Signal) alarm from IWF
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: Not Suported
"
::= {dsx1FramerEntry 4}
dsx1FramerConfState OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Framer Configuration state bitmap.
bit 0: high value indicates General Configuration fail
bit 1: high value indicates LIU2IWF Configuration fail
bit 2: high value indicates IWF2LIU Configuration fail
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 0..7
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1FramerEntry 5}
-- ==================================================================
-- | Start of 2E1/DS1 SFP dsx1 Protocol Engine / jitter buffer Table |
-- ==================================================================
dsx1PWTDMProtocolEngineTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dsx1PWTDMProtocolEngineEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the 2E1/DS1 SFP protocol engine configuration
information.
ALCATEL NOTE:
TABLESIZE: 11
DESCR: This Table is not supported, handled internally in the sfp hardware.
"
::= {sfpMIB 16}
dsx1PWTDMProtocolEngineEntry OBJECT-TYPE
SYNTAX Dsx1PWTDMProtocolEngineEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry consists of a list of 2E1/DS1 SFP protocol engine parameters."
INDEX {dsx1SfpProtLogicalSlot, dsx1SfpProtFaceplateNumber}
::= {dsx1PWTDMProtocolEngineTable 1}
Dsx1PWTDMProtocolEngineEntry ::=
SEQUENCE {
dsx1SfpProtLogicalSlot INTEGER,
dsx1SfpProtFaceplateNumber INTEGER,
dsx1PWTDMProtocolEngineDA1 MacAddress,
dsx1PWTDMProtocolEngineDA2 MacAddress,
dsx1PWTDMProtocolEngineDA3 MacAddress,
dsx1PWTDMProtocolEngineDA4 MacAddress,
dsx1PWTDMProtocolEngineSA1 MacAddress,
dsx1PWTDMProtocolEngineSA2 MacAddress,
dsx1PWTDMProtocolEngineSA3 MacAddress,
dsx1PWTDMProtocolEngineSA4 MacAddress,
dsx1RTPPayloadtype INTEGER
}
dsx1SfpProtLogicalSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the first index of the dsx1sfpLogicalSlot.
Normally, this object contains the Logical Slot ID (as defined in
the Equipment MIB) of the card which has the SFP cage of interest
on its faceplate.
If that card does not have a Logical Slot ID, the Logical Slot ID
of a related card is used.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: 1..65535
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMProtocolEngineEntry 1}
-- Define the second index column of the dsx1PWTDMProtocolEngineTable.
dsx1SfpProtFaceplateNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the second index of the dsx1PWTDMProtocolEngineTable.
It is the number of the SFP cage, as shown on the card
faceplate. If the faceplate cage number is zero,
sfpDiagSfpFaceplateNumber=0 is used (i.e. zero is not a
special case).
For an SFP cage, it is the faceplate number of the SFP cage (e.g. 1).
For an XFP cage, it is 256 + (the faceplate number of the XFP cage). For
example 257.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NO
RANGE: 0..511
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMProtocolEngineEntry 2}
dsx1PWTDMProtocolEngineDA1 OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MAC Destination Address 1 in DA pool (for Eth2TDM packet discard, verify whether
received packets DA is equal to this DA pool or not)
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMProtocolEngineEntry 3}
dsx1PWTDMProtocolEngineDA2 OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MAC Destination Address 2 in DA pool (for Eth2TDM packet discard, verify whether
received packets DA is equal to this DA pool or not)
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMProtocolEngineEntry 4}
dsx1PWTDMProtocolEngineDA3 OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MAC Destination Address 3 in DA pool (for Eth2TDM packet discard, verify whether
received packets DA is equal to this DA pool or not)
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMProtocolEngineEntry 5}
dsx1PWTDMProtocolEngineDA4 OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MAC Destination Address 4 in DA pool (for Eth2TDM packet discard, verify whether
received packets DA is equal to this DA pool or not)
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMProtocolEngineEntry 6}
dsx1PWTDMProtocolEngineSA1 OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MAC Source Address 1 in SA pool (TDM2Eth, config SA on per PW basis)
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMProtocolEngineEntry 7}
dsx1PWTDMProtocolEngineSA2 OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MAC Source Address 2 in SA pool (TDM2Eth, config SA on per PW basis)
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMProtocolEngineEntry 8}
dsx1PWTDMProtocolEngineSA3 OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MAC Source Address 3 in SA pool (TDM2Eth, config SA on per PW basis)
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMProtocolEngineEntry 9}
dsx1PWTDMProtocolEngineSA4 OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MAC Source Address 4 in SA pool (TDM2Eth, config SA on per PW basis)
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: NA
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMProtocolEngineEntry 10 }
dsx1RTPPayloadtype OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RTP payload type mode.
00 - PayloadType=all 0s, SSID=all 1s
01 - PayloadType=all 1s, SSID=all 1s
10 - PayloadType= ecid(18 downto 12), SSID=ecid
11 - PayloadType= vlan_id(6 downto 0), SSID= x0000 & vlan_id
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 0...3
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {dsx1PWTDMProtocolEngineEntry 11}
-- ==================================================================
-- | Start of Host LT SFP Configuration Extension Table |
-- ==================================================================
ltHostSfpConfigExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF LtHostSfpConfigExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the host shelf LT SFP configuration information
regarding link assignement to LT on FD-REM
ALCATEL NOTE:
TABLESIZE: 288 (Full FX-8 with FELT-B --> 8 * 36)
"
::= {sfpMIB 17}
ltHostSfpConfigExtEntry OBJECT-TYPE
SYNTAX LtHostSfpConfigExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry consists of a list of host shelf LT SFP configuration ltHostSfpConfigExtTable."
INDEX {ltHostConfigSfpLogSlotId, ltHostConfigExtSfpFaceplateNumber}
::= {ltHostSfpConfigExtTable 1}
LtHostSfpConfigExtEntry ::=
SEQUENCE {
ltHostConfigExtSfpFaceplateNumber INTEGER,
ltHostSfpCableToRack INTEGER,
ltHostSfpCableToShelf INTEGER,
ltHostSfpCableToSlot INTEGER,
ltHostConfigSfpLogSlotId EqptSlotIndex
}
ltHostConfigExtSfpFaceplateNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the SFP number on the LT identified by ltHostConfigExtSfpLogSlotId.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: YES
INSRVMOD: NA
RANGE: 1..24
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {ltHostSfpConfigExtEntry 1}
ltHostSfpCableToRack OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the Rack ID of the expansion shelf LSM which the SFP
is planned to cable to. Value 0 means that no rack is specified.
ALCATEL NOTE:
ACCESS: NA
USAGE: OPT
PERSIST: YES
INSRVMOD: YES
RANGE: 0..7
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {ltHostSfpConfigExtEntry 2}
ltHostSfpCableToShelf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the Shelf ID of the expansion shelf LSM which
the host shelf SFP is planned to cable to.
Value 0 means that no shelf is specified.
ALCATEL NOTE:
ACCESS: NA
USAGE: OPT
PERSIST: YES
INSRVMOD: YES
RANGE: 0..4
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: The shelf identified by ltHostSfpCableToRack and
ltHostSfpCableToShelf must already be planned.
"
::= {ltHostSfpConfigExtEntry 3}
ltHostSfpCableToSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the Slot ID of the expansion shelf LSM which
the SFP is planned to cable to.
Value 0 means that no slot is specified.
ALCATEL NOTE:
ACCESS: NA
USAGE: OPT
PERSIST: YES
INSRVMOD: YES
RANGE: DEP / depends on the shelf type.
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {ltHostSfpConfigExtEntry 4}
ltHostConfigSfpLogSlotId OBJECT-TYPE
SYNTAX EqptSlotIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The logical slot id of the board where the remote LT is plugged in
ALCATEL NOTE:
ACCESS: NA
USAGE: OPT
PERSIST: YES
INSRVMOD: YES
RANGE: DEP / depends on the shelf type.
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {ltHostSfpConfigExtEntry 5}
-- ==================================================================
-- | Start of LT Host SFP Status Table |
-- ==================================================================
ltHostSfpStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF LtHostSfpStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the host shelf SFP or XFP status information.
ALCATEL NOTE:
TABLESIZE: 26
"
::= {sfpMIB 18}
ltHostSfpStatusEntry OBJECT-TYPE
SYNTAX LtHostSfpStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry consists of a list of SFP or XFP status parameters."
INDEX {ltHostStatusSfpLogSlotId, ltHostStatusSfpFaceplateNumber}
::= {ltHostSfpStatusTable 1}
LtHostSfpStatusEntry ::=
SEQUENCE {
ltHostStatusSfpFaceplateNumber INTEGER,
ltLanxPortNumber INTEGER,
ltHostSfpDownlinkStatus INTEGER,
ltHostSfpCabledToRack INTEGER,
ltHostSfpCabledToShelf INTEGER,
ltHostSfpCabledToSlot INTEGER,
ltHostSfpType INTEGER,
ltHostSfpCablingMismatch INTEGER,
ltHostSfpCabledToPhysAddress PhysAddress,
ltHostStatusSfpLogSlotId EqptSlotIndex
}
ltHostStatusSfpFaceplateNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the host shelf SFP or XFP cage number.
For an SFP cage, it is the faceplate number of the SFP cage (e.g. 1).
For an XFP cage, it is 256 + (the faceplate number of the XFP cage). For
example, if the XFP cage has faceplate label X1,
ltHostStatusSfpFaceplateNumber == 257.
For LT, this is the port number.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 1..258
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {ltHostSfpStatusEntry 1}
ltLanxPortNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This is the Physical LANX or IHUB port to which the SFP or XFP is
connected to. For an SHUB system, the lanxPortNumber here corresponds
to lanxInterfaceIndex in the LANX MIB. For an IHUB system, the
lanxPortNumber to the TmnxPortID to be used in the Timetra Port MIB.
For IHUB this is an 32 bit encoded number for which the structure is
defined in Timetra-TC-MIB.
It is set to 0 for LT.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 1..26 for SHUB / 32 Bit Encoded number for IHUB
DEFVALUE: DEP / depends on the ltHostStatusSfpFaceplateNumber.
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {ltHostSfpStatusEntry 2}
ltHostSfpDownlinkStatus OBJECT-TYPE
SYNTAX INTEGER {
ok (1),
sfpNotPresent (2),
los (3),
txFail (4),
invalidAlcatelId (5),
unknown (6),
sfpControlFail (7),
notApplicable (8),
txFailAndLos (9),
sfpPlanDetectMismatch (10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the host shelf SFP or XFP status.
ok (1): The SFP or XFP is operational.
sfpNotPresent (2): The SFP or XFP cage is empty.
los (3): The SFP or XFP has detected Loss of Signal.
txFail (4): The SFP or XFP has detected Transmitter
Fail.
invalidAlcatelId (5): The SFP or XFP does not contain
a valid Alcatel-Lucent ID.
unknown (6): The host expansion card is planned but
not inserted.
sfpControlFail (7): The SFP or XFP is not responding, or the
I2C read failed.
notApplicable (8): Retrieval of status information from the
SFP or XFP cage is not supported.
txFailAndLos (9): The SFP or XFP has detected both
Transmitter Fail and Loss of Signal.
sfpPlanDetectMismatch (10): Not used - superseded by the
ltHostSfpCablingMismatch object.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: NA
DEFVALUE: 6 / status is unknown
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {ltHostSfpStatusEntry 3}
ltHostSfpCabledToRack OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Rack ID of the expansion shelf LSM to which the host shelf SFP
is cabled to.
Value 0 means that SFP is not cabled to any expansion shelf LSM.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 0..7
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {ltHostSfpStatusEntry 4}
ltHostSfpCabledToShelf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Shelf ID of the expansion shelf LSM which the host shelf
SFP is cabled to.
Value 0 means that SFP is not cabled to any expansion shelf LSM.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 0..4
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {ltHostSfpStatusEntry 5}
ltHostSfpCabledToSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the Slot ID of the expansion shelf LSM which the host shelf SFP
is cabled to.
Value 0 means that SFP is not cabled to any expansion shelf LSM.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: DEP / depends on the shelf type.
DEFVALUE: 0
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {ltHostSfpStatusEntry 6}
ltHostSfpType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable indicates the type of the SFP or XFP, as read from the
device.
It is a bitmap represented as a sum, therefore, it can represent
multiple types (combination of types) simultaneously.
The SFP type bits (0..7) are as defined in standard SFF-8472.
The XFP type bits (8..15) are as defined in standard INF-8077_v4.5.
The SFP octet and the XFP octet are mutually exclusive (i.e. at least
one of the two octets is always zero).
The various bit positions are:
bit 0 (1): 1000BASE-SX
bit 1 (2): 1000BASE-LX
bit 2 (4): 1000BASE-CX
bit 3 (8): 1000BASE-T
bit 4 (16): 100BASE-LX/LX10
bit 5 (32): 100BASE-FX
bit 6 (64): BASE-BX10
bit 7 (128): BASE-PX
bit 8 (256): reserved for a future XFP type, INF-8077
bit 9 (512): 10GBASE-EW
bit 10 (1024): 10GBASE-LW
bit 11 (2048): 10GBASE-SW
bit 12 (4096): 10GBASE-LRM
bit 13 (8192): 10GBASE-ER
bit 14 (16384): 10GBASE-LR
bit 15 (32768): 10GBASE-SR
bit 16 (65536): 2500BASE-SX
bit 17 (131072): 2500BASE-LX
bit 18 (262144): 2500BASE-BX
If the ltHostSfpType is unknown or not specified, ltHostSfpType = 0.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: 0..65535
DEFVALUE: 0 / ltHostSfpType unknown
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {ltHostSfpStatusEntry 7}
ltHostSfpCablingMismatch OBJECT-TYPE
SYNTAX INTEGER {
noMismatch(1),
unexpectedRemoteLt(2),
assignmentMismatch(3),
incompatibleShelf(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the host shelf SFP cabling mismatch status:
noMismatch(1): no cabling mismatch is detected.
unexpectedRemoteLt(2): a remote LT is detected at an unassigned
downlink SFP port.
assignmentMismatch(3): the detected remote LT does not match
the LT assigned to this host SFP.
incompatibleShelf(4): the detected remote LT is in a shelf
type which is not the planned shelf type.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: NA
DEFVALUE: 1 / noMismatch
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {ltHostSfpStatusEntry 8}
ltHostSfpCabledToPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physical (MAC) address of the remote interface that is
cabled to this host shelf SFP.
If the remote interface does not have such an address or
the address is not yet discovered, this object would
contain an octet string of zero length.
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {ltHostSfpStatusEntry 9}
ltHostStatusSfpLogSlotId OBJECT-TYPE
SYNTAX EqptSlotIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The logical slot id of the board where the remote LT is plugged in
ALCATEL NOTE:
ACCESS: RO
USAGE: NA
PERSIST: NO
INSRVMOD: NA
RANGE: NA
DEFVALUE: NA
UNITS: NA
SPARSE: NO
DESCR: NA
"
::= {ltHostSfpStatusEntry 10}
END
Reference in New Issue View Git Blame Copy Permalink