mibs/MIBS/radlan/RADLAN-IP
2023-12-05 12:25:34 +01:00

1493 lines
49 KiB
Plaintext
Raw Permalink Blame History

RADLAN-IP DEFINITIONS ::= BEGIN
-- Title: RADLAN IP Private Extension
-- Version: 7.45.00.00
-- Date: 22 Jun 2006
IMPORTS
rnd FROM RADLAN-MIB
ipAddrEntry FROM IP-MIB
InterfaceIndexOrZero, InterfaceIndex FROM IF-MIB
rip2IfConfEntry FROM RIPv2-MIB
ipCidrRouteEntry,ipCidrRouteDest,
ipCidrRouteMask, ipCidrRouteTos, ipCidrRouteNextHop FROM IP-FORWARD-MIB
Unsigned32, Integer32, Counter32, IpAddress,
MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
DisplayString, RowStatus, TruthValue, PhysAddress,
TimeStamp, RowPointer, TestAndIncr, StorageType FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
InetAddress, InetAddressType,
InetAddressPrefixLength,
InetVersion, InetZoneIndex FROM INET-ADDRESS-MIB
InterfaceIndex FROM IF-MIB
IpAddressOriginTC, IpAddressStatusTC
FROM IP-MIB;
ipSpec MODULE-IDENTITY
LAST-UPDATED "200606220000Z"
ORGANIZATION "Radlan Computer Communications Ltd."
CONTACT-INFO
"radlan.com"
DESCRIPTION
"The private MIB module definition for IP MIB."
REVISION "200606220000Z"
DESCRIPTION
"Initial version of this MIB."
::= { rnd 26 }
--
-- The textual conventions we define and use for rlIpAddressTable (in this MIB).
--
RlIpAddressOriginTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The origin of the address.
following are same as ipAddressOriginTC in standard MIB:
manual(2) indicates that the address was manually configured
to a specified address, e.g., by user configuration.
dhcp(4) indicates an address that was assigned to this
system by a DHCP server.
linklayer(5) indicates an address created by IPv6 stateless
auto-configuration.
random(6) indicates an address chosen by the system at
random, e.g., an IPv4 address within 169.254/16, or an RFC
3041 privacy address.
following are additional to standard MIB:
autoConfig(7) indicates that the address was auto configured configured
to a specified address, e.g., not by user configuration.
eui64(8) indicates that the address was partially configured configured
to a specified address, e.g., address suffix is based on MAC address with
EUI-64 representation.
tunnelIsatap(9) indicates that the address an ISATATP tunnel representation.
tunnelIsatap(10) indicates that the address an 6to4 tunnel representation.
tunnelIsatap(11) indicates that the address was partially configured configured
to a specified address, e.g., address prefix is preconfigured.
"
SYNTAX INTEGER {
other(1),
manual(2),
dhcp(4),
linklayer(5),
random(6),
-- additional to standard MIB
autoConfig(7),
eui64(8),
tunnelIsatap(9),
tunnel6to4(10),
generalPrefix(11)
}
rsIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is parralel to MIB II IpAddrTable, and is used to
add/delete entries to/from that table. In addition it contains
private objects."
::= { ipSpec 1 }
rsIpAddrEntry OBJECT-TYPE
SYNTAX RsIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The addressing information for one of this
entity's IP addresses."
INDEX {rsIpAdEntAddr}
::= { rsIpAddrTable 1 }
RsIpAddrEntry ::= SEQUENCE {
rsIpAdEntAddr IpAddress,
rsIpAdEntIfIndex INTEGER,
rsIpAdEntNetMask IpAddress,
rsIpAdEntForwardIpBroadcast INTEGER,
rsIpAdEntBackupAddr IpAddress, -- obsolete
rsIpAdEntStatus INTEGER,
rsIpAdEntBcastAddr INTEGER,
rsIpAdEntArpServer INTEGER,
rsIpAdEntName DisplayString,
rsIpAdEntOwner INTEGER,
rsIpAdEntAdminStatus INTEGER,
rsIpAdEntOperStatus INTEGER,
rsIpAdEntPrecedence INTEGER,
rsIpAdEntUniqueStatus INTEGER,
rsIpAdEntIcmpRedirectSend INTEGER
}
rsIpAdEntAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address to which this entry's addressing
information pertains."
::= { rsIpAddrEntry 1 }
rsIpAdEntIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index value which uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex."
::= { rsIpAddrEntry 2 }
rsIpAdEntNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the hosts bits set to 0."
::= { rsIpAddrEntry 3 }
rsIpAdEntForwardIpBroadcast OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This variable controls forwarding of IP (sub)net-directed
broadcasts destined for an attached sub(net). "
DEFVAL { enable }
::= { rsIpAddrEntry 4 }
rsIpAdEntBackupAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In case there are two IP routers in the domain,
the address of the second IP router."
::= { rsIpAddrEntry 5 }
rsIpAdEntStatus OBJECT-TYPE
SYNTAX INTEGER{
valid(1),
invalid(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The validity of this entry. Invalid indicates that this entry is
invalid in IpAddrTable (MIB II)."
DEFVAL { valid }
::= { rsIpAddrEntry 6 }
rsIpAdEntBcastAddr OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Indicates how the host part of ip subnet broadcast messages will be
filled:
0 - host part will be filled by 0
1 - host part will be filled by 1."
::= { rsIpAddrEntry 7 }
rsIpAdEntArpServer OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the router will reply to incoming ARP requests on
this interface, providing the physical address corresponding to this
IP interface."
DEFVAL { disable }
::= { rsIpAddrEntry 8 }
rsIpAdEntName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Interface name"
::= { rsIpAddrEntry 9 }
rsIpAdEntOwner OBJECT-TYPE
SYNTAX INTEGER{
static(1),
dhcp(2),
internal(3),
default(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Interface owner. Static if interface defined by user, dhcp
if received by boot protocol like DHCP and internal
for internal usage."
DEFVAL { static }
::= { rsIpAddrEntry 10 }
rsIpAdEntAdminStatus OBJECT-TYPE
SYNTAX INTEGER{
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Interface admin status."
DEFVAL { up }
::= { rsIpAddrEntry 11 }
rsIpAdEntOperStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If active the interface can be used to send and receive frames."
::= { rsIpAddrEntry 12 }
rsIpAdEntPrecedence OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP preference, to be selected as source IP for rsIpAdEntIfIndex.
this source IP selection is first by preference value.
if more than one IP has the same preference the one with the
lowest IP is selected.
(higher value -> higher preference)"
DEFVAL { 1 }
::= { rsIpAddrEntry 13 }
rsIpAdEntUniqueStatus OBJECT-TYPE
SYNTAX INTEGER {
valid (1),
validDuplicated (2),
tentative (3),
duplicated (4),
delayed (5),
notReceived (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP address unique status defines IP address
state in an assignment process and
after duplication detection."
::= { rsIpAddrEntry 14 }
rsIpAdEntIcmpRedirectSend OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enables or disables sending of ICMP redirect messages to
re-send a packet through the same interface on which the packet was
received."
DEFVAL { enable }
::= { rsIpAddrEntry 15 }
icmpSpec OBJECT IDENTIFIER ::= { ipSpec 2 }
rsIcmpGenErrMsgEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable controlls the ability to generate ICMP error messages"
DEFVAL { enable }
::= { icmpSpec 1 }
rsIcmpRdTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsIcmpRdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains ICMP Router Discovery parameters
configurated per IP interface."
::= {icmpSpec 2}
rsIcmpRdEntry OBJECT-TYPE
SYNTAX RsIcmpRdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ICMP parameters configurated for IP interface."
INDEX {rsIcmpRdIpAddr}
::= {rsIcmpRdTable 1}
RsIcmpRdEntry ::= SEQUENCE {
rsIcmpRdIpAddr IpAddress,
rsIcmpRdIpAdvertAddr IpAddress,
rsIcmpRdMaxAdvertInterval INTEGER,
rsIcmpRdMinAdvertInterval INTEGER,
rsIcmpRdAdvertLifetime INTEGER,
rsIcmpRdAdvertise INTEGER,
rsIcmpRdPreferenceLevel INTEGER,
rsIcmpRdEntStatus INTEGER
}
rsIcmpRdIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address to which this entry's information pertains."
::= {rsIcmpRdEntry 1}
rsIcmpRdIpAdvertAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The IP destination address to be used for multicast
Router Advertisements sent from the interface. The
only permissible values are the all-systems multicast
address, 224.0.0.1, or the limited-broadcast address,
255.255.255.255."
DEFVAL {'E0000001'H}
::= {rsIcmpRdEntry 2}
rsIcmpRdMaxAdvertInterval OBJECT-TYPE
SYNTAX INTEGER (4..1800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum time allowed between sending multicast
Router Advertisements from the interface, in seconds.
Must be no less than 4 seconds and no greater than 1800
seconds."
DEFVAL {600}
::= {rsIcmpRdEntry 3}
rsIcmpRdMinAdvertInterval OBJECT-TYPE
SYNTAX INTEGER (3..1800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minimum time allowed between sending unsolicited
multicast Router Advertisements from the interface, in
seconds. Must be no less than 3 seconds and no greater
than rsIcmpRdMaxAdvertInterval.
Default: 0.75 * rsIcmpRdMaxAdvertInterval."
::= {rsIcmpRdEntry 4}
rsIcmpRdAdvertLifetime OBJECT-TYPE
SYNTAX INTEGER (4..9000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum length of time that the advertised addresses
are to be considered as valid. Must be no less than
rsIcmpRdMaxAdvertInterval and no greater than 9000 seconds.
Default: 3 * rsIcmpRdMaxAdvertInterval."
::= {rsIcmpRdEntry 5}
rsIcmpRdAdvertise OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A flag indicating whether or not the address is to be
advertised."
DEFVAL {enable}
::= {rsIcmpRdEntry 6}
rsIcmpRdPreferenceLevel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The preferability of the address as a default router
address, relative to other router addresses on the same
subnet."
DEFVAL {0}
::= {rsIcmpRdEntry 7}
rsIcmpRdEntStatus OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting of any value to this object set values of
all fields to the default values."
::= {rsIcmpRdEntry 8}
rip2Spec OBJECT IDENTIFIER ::= { ipSpec 3 }
-- see rlIpRouters
arpSpec OBJECT IDENTIFIER ::= { ipSpec 4 }
rsArpDeleteTable OBJECT-TYPE
SYNTAX INTEGER {
noAction(0), -- for get only
deleteArpTab(1),
deleteIpArpDynamicEntries(2),
deleteIpArpStaticEntries(3),
deleteIpArpDelDynamicRefreshStatic(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
-- old description
-- "Setting this object to any not-null value has the effect of deleting
-- all entries of the ARP table."
-- new description
"Setting to value deleteArpTab(1): deletes the arp table -
static and dynamic entries
deleteIpArpDynamicEntries(2): delete all dynamic entries
deleteIpArpStaticEntries(3): delete all static entries
deleteIpArpDelDynamicRefreshStatic(4) - delete all dynamic -
refresh static, thus
refrashing FFT.
on get returns the last action"
::= { arpSpec 1 }
-- range 1 to 40,000,000 to allow system convesion to timer
rsArpInactiveTimeOut OBJECT-TYPE
SYNTAX Unsigned32 (1..40000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable defines the maximum time period (in second) that can
pass between ARP requests concerning an entry in the ARP table.
After this time period, the entry is deleted from the table."
DEFVAL { 60000 }
::= { arpSpec 2 }
rsArpProxy OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When ARP Proxy is enabled, the router can respond to
ARP requests for nodes located on a different sub-net,
provided they are it its network table. The router responds
with its own MAC address.
When ARP Proxy is disabled, the router responds only
to ARP requests for its own IP addresses."
DEFVAL { disable }
::= { arpSpec 3 }
rsArpRequestsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays how many ARP requests have been sent out to an ARP server
for address resolution."
::= { arpSpec 4 }
rsArpRepliesSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays how many ARP replies have been sent out to an ARP client
in response to request packets."
::= { arpSpec 5 }
rsArpProxyRepliesSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays how many proxy ARP replies have been sent out in response
to request packets. A proxy router serving as a gateway to a subnet
would respond with a proxy reply."
::= { arpSpec 6 }
rsArpUnresolveTimer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the frequency in seconds in which to send out ARP
requests to resolve the Next Hop MAC address."
::= { arpSpec 7 }
rsArpMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MIB's version, the current version is 2.
Version 1:
rsArpDeleteTable
Setting this object to any not-null value has the effect
of deleting all entries of the ARP table.
Version 2:
rsArpDeleteTable
Setting to value deleteArpTab(1): deletes the arp table -
static and dynamic entries
deleteIpArpDynamicEntries(2): delete all dynamic entries
deleteIpArpStaticEntries(3): delete all static entries
deleteIpArpDelDynamicRefreshStatic(4):
delete all dynamic -
refresh static, thus
refrashing FFT.
on get returns the last action.
New MIB variables support:
rsArpRequestsSent
rsArpRepliesSent
rsArpProxyRepliesSent
rsArpUnresolveTimer
rsArpMibVersion
Version 3:
New MIB variables support:
rsArpStaticTable
rsArpInterfaceTable"
::= { arpSpec 8 }
rsArpStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsArpStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table used for adding static ARP entries
without specifying Layer 2 interface."
::= { arpSpec 9 }
rsArpStaticEntry OBJECT-TYPE
SYNTAX RsArpStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains one IpAddress to `physical' address equivalence."
INDEX { rsArpStaticIpAddress }
::= { rsArpStaticTable 1 }
RsArpStaticEntry ::= SEQUENCE {
rsArpStaticIpAddress IpAddress,
rsArpStaticPhysAddress PhysAddress,
rsArpStaticRowStatus RowStatus
}
rsArpStaticIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IpAddress corresponding to the media-dependent `physical' address."
::= { rsArpStaticEntry 1 }
rsArpStaticPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The media-dependent `physical' address."
::= { rsArpStaticEntry 2 }
rsArpStaticRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Entry status."
::= { rsArpStaticEntry 3 }
rsArpInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsArpInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"L2 Interface specific configuration for ARP Application.
Entry in this table will be dynamically created,
when first IP Address is defined on specific L2 interface,
and destroyed when the last IP address on this L2 interface is removed"
::= { arpSpec 10 }
rsArpInterfaceEntry OBJECT-TYPE
SYNTAX RsArpInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains L2 Interface specific configuration
for ARP Application."
INDEX { rsArpInterfaceIfIndex }
::= { rsArpInterfaceTable 1 }
RsArpInterfaceEntry ::= SEQUENCE {
rsArpInterfaceIfIndex InterfaceIndex,
rsArpInterfaceInactiveTimeOut Unsigned32,
rsArpInterfaceArpProxy INTEGER
}
rsArpInterfaceIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value that uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IF-MIB's ifIndex."
::= { rsArpInterfaceEntry 1 }
rsArpInterfaceInactiveTimeOut OBJECT-TYPE
SYNTAX Unsigned32 (0..40000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable defines the maximum time period (in second) that can
pass between ARP requests concerning an entry in the ARP table.
After this time period, the entry is deleted from the table.
Default value 0 means using value from rsArpInactiveTimeOut"
DEFVAL { 0 }
::= { rsArpInterfaceEntry 2 }
rsArpInterfaceArpProxy OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When ARP Proxy is enabled, the router can respond to
ARP requests for nodes located on a different sub-net,
provided they are it its network table. The router responds
with its own MAC address.
When ARP Proxy is disabled, the router responds only
to ARP requests for its own IP addresses."
DEFVAL { disable }
::= { rsArpInterfaceEntry 3 }
rsArpNumOfEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Displays how many ARP entries stored in ARP Table."
::= { arpSpec 11 }
tftp OBJECT IDENTIFIER ::= { ipSpec 5 }
rsTftpRetryTimeOut OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" General Retransmission time-out value (seconds) "
DEFVAL { 15 }
::= { tftp 1 }
rsTftpTotalTimeOut OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Total Retransmission time-out value (seconds) "
DEFVAL { 60 }
::= { tftp 2 }
rsSendConfigFile OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The file name include path where the Router Server will put the full
configuration. The default destination address will be the sender
address."
::= { tftp 3 }
rsGetConfigFile OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The file name include path where the Router Server will get the full
configuration from. The default destination address will be the sender
address."
::= { tftp 4 }
rsLoadSoftware OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The file name include path where the Router Server will get the
software. The default source address will be the sender address."
::= { tftp 5 }
rsFileServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the configuration / sw server."
::= { tftp 6 }
rsSoftwareDeviceName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Software Device Name specifies a device name, using this Software"
::= { tftp 7 }
rsSoftwareFileAction OBJECT-TYPE
SYNTAX INTEGER {
download(1),
upload (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Holds the current action done on the software file "
DEFVAL {download }
::= {tftp 8 }
ipRedundancy OBJECT IDENTIFIER ::= { ipSpec 6 }
-- see rlIpRouter.mib
ipRouteLeaking OBJECT IDENTIFIER ::= { ipSpec 7 }
-- see rlIpRouter.mib
ipRipFilter OBJECT IDENTIFIER ::= { ipSpec 8 }
-- see rlIpRouter.mib
rsRipEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
shutdown(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables, disables or shutdown (doesn't delete configuration) RIP."
::= { ipSpec 9 }
rsTelnetPassword OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ipSpec 11 }
rlTranslationNameToIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlTranslationNameToIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table translates IP interfaces's name to
IP interface's address"
::= { ipSpec 12 }
rlTranslationNameToIpEntry OBJECT-TYPE
SYNTAX RlTranslationNameToIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row definition for this table."
INDEX { IMPLIED rlTranslationNameToIpName }
::= { rlTranslationNameToIpTable 1 }
RlTranslationNameToIpEntry ::= SEQUENCE {
rlTranslationNameToIpName DisplayString,
rlTranslationNameToIpIpAddr IpAddress
}
rlTranslationNameToIpName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Interface name"
::= { rlTranslationNameToIpEntry 1 }
rlTranslationNameToIpIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Interface address"
::= { rlTranslationNameToIpEntry 2 }
-- Mib for Preferance among routing protocols:
-- Range value 0..255 . O is most preferred, 255 never used for forwarding.
-- only exception is direct which range 0..254 we prevent direct from becoming unreachable
-- (according to RFC1812 section 5.2.4)
rlIpRoutingProtPreference OBJECT IDENTIFIER ::= { ipSpec 13 }
-- see rlIpRouter.mib
rlOspf OBJECT IDENTIFIER ::= { ipSpec 14 }
-- see rlIpRouter.mib
--IP address table mib ver
rlIpAddrTableMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IpAddrTable MIB's version."
::= {ipSpec 15 }
rlIpCidrRouteExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpCidrRouteExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Augmenting ipCidrRouteTable (ip forwarfing information table)
for added info as read only"
::= {ipSpec 16 }
rlIpCidrRouteExtEntry OBJECT-TYPE
SYNTAX RlIpCidrRouteExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row of the table ipCidrRouteTable Extended
by this definition."
AUGMENTS { ipCidrRouteEntry }
::= {rlIpCidrRouteExtTable 1 }
RlIpCidrRouteExtEntry ::= SEQUENCE {
rlIpCidrRouteProto INTEGER
}
rlIpCidrRouteProto OBJECT-TYPE
SYNTAX INTEGER {
local(1), -- local interface
netmgmt(2), -- static route
rip(3), -- Berkeley RIP or RIP-II
ospfInternal(4), -- Open Shortest Path First Internal Route
ospfExternal(5), -- Open Shortest Path First External Route
ospfAggregateNetRange(6), -- Open Shortest Path First
bgp4Internal(7), -- Border Gateway Protocol Internal Route
bgp4External(8), -- Border Gateway Protocol External Route
aggregateRoute(9), --
other(10) -- not specified
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Added infor for ipCidrRouteTable.
extends the info of ipCidrRouteProto to show the route inner protocol.
Allowes the user to see which type of route in the protocol
e.g. ospf internal, ospf external."
::= { rlIpCidrRouteExtEntry 1 }
rlIpStaticRoute OBJECT IDENTIFIER ::= { ipSpec 17 }
rlIpStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's static (user configured) IP Routing table.
entries are MAX-ACCESSible even if not used for forwarding "
::= { rlIpStaticRoute 1 }
rlIpStaticRouteEntry OBJECT-TYPE
SYNTAX RlIpStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular Static(user configured) route to a particular destina-
tion, under a particular policy."
INDEX { rlIpStaticRouteDest,
rlIpStaticRouteMask,
rlIpStaticRouteTos,
rlIpStaticRouteNextHop }
::= { rlIpStaticRouteTable 1 }
RlIpStaticRouteEntry ::= SEQUENCE {
rlIpStaticRouteDest IpAddress,
rlIpStaticRouteMask IpAddress,
rlIpStaticRouteTos INTEGER,
rlIpStaticRouteNextHop IpAddress,
rlIpStaticRouteMetric INTEGER,
rlIpStaticRouteType INTEGER,
rlIpStaticRouteNextHopAS INTEGER,
rlIpStaticRouteForwardingStatus INTEGER,
rlIpStaticRouteRowStatus RowStatus,
rlIpStaticRouteOwner INTEGER
}
rlIpStaticRouteDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of this route.
This object may not take a Multicast (Class D)
address value.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
rlIpStaticRouteMask object is not equal to x."
::= { rlIpStaticRouteEntry 1 }
rlIpStaticRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the rlIpStaticRouteDest field. For
those systems that do not support arbitrary
subnet masks, an agent constructs the value of
the rlIpStaticRouteMask by reference to the IP Ad-
dress Class.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bitwise logical-AND of x with
the value of the corresponding instance of the
rlIpStaticRouteDest object is not equal to ipCidrRoute-
Dest."
::= { rlIpStaticRouteEntry 2 }
rlIpStaticRouteTos OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"See ipCidrRouteTos definition
For now only value 0 is valid"
::= { rlIpStaticRouteEntry 3 }
rlIpStaticRouteNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"On remote routes, the address of the next sys-
tem en route; Otherwise, 0.0.0.0."
::= { rlIpStaticRouteEntry 4 }
rlIpStaticRouteMetric OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The routing metric for this route.
The semantics of this metric are determined by the user.
normal semantic will be next hop count or some administarative distance
to create routing policy."
::= { rlIpStaticRouteEntry 5 }
rlIpStaticRouteType OBJECT-TYPE
SYNTAX INTEGER {
reject (1), -- route which discards traffic
local (2), -- local interface
remote (3) -- remote destination
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of route. Note that local(3) refers
to a route for which the next hop is the final
destination this is the case when user overides the a local interface
entry to change it parameters;
remote(4) refers to a route for
which the next hop is not the final destina-
tion.
reject (2) refers to a route which, if matched, discards
the message as unreachable. This is may be used as a means of
correctly aggregating routes, When static routes are distributed (leaked)
to other protocols."
::= { rlIpStaticRouteEntry 6 }
rlIpStaticRouteNextHopAS OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Autonomous System Number of the Next Hop.
The semantics of this object are determined by
the routing-protocol specified in the route's
ipCidrRouteProto value. When this object is
unknown or not relevant its value should be set
to zero."
DEFVAL { 0 }
::= { rlIpStaticRouteEntry 7 }
rlIpStaticRouteForwardingStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"active - An indication that the route has implication on routing
inactive - the route is a backup route or it is down. It is not used
in forwarding decision.
Down means that the Ip interface on which it is configured is down.
(Note: ip interface down may be for two reason - its admin status or
the L2 interface , on which the ip interface is configured, status"
::= { rlIpStaticRouteEntry 8 }
rlIpStaticRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status variable, used according to
row installation and removal conventions."
::= { rlIpStaticRouteEntry 9 }
rlIpStaticRouteOwner OBJECT-TYPE
SYNTAX INTEGER {
static (1),
dhcp (2),
default (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Static - The route is configured over Static IP.
This route is written to configuration files.
Dhcp - The route is Configured by DHCP
(received as part of DHCP configuration)
This route IS NOT written to configuration files
Dhcp - The route is Configured default system config
exist till any other configuration
is applied"
::= { rlIpStaticRouteEntry 10 }
rlIpRouter OBJECT IDENTIFIER ::= { ipSpec 18 }
rlIpAddressesNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable specifies current number of entries in rsIpAddrTable."
DEFVAL { 0 }
::= { ipSpec 23 }
rlIpStaticPrefixesNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable specifies current number of static prefixes in the system."
DEFVAL { 0 }
::= { ipSpec 24 }
rlIpTotalPrefixesNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable specifies current total number of prefixes in the system."
DEFVAL { 0 }
::= { ipSpec 25 }
--- rlManagementIPv4
rlManagementIpv4 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The system management IPv4 address which is kept between system modes changes"
::= { ipSpec 32 }
rlManagementIpv4Action OBJECT-TYPE
SYNTAX INTEGER {
clear (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The system management IPv4 action:
clear - delete all ipv4 interfaces from startup configuration database except rlManagementIpv4"
::= { ipSpec 33 }
rlManagementIpIfindex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The system management IPs addresses ifIndex which is kept between system modes changes"
::= { ipSpec 34 }
rlSourceAddressSelectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlSourceAddressSelectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table specifies IPv4 and IPv6 source
interfaces per application. Only supported
applications are present in the table."
::= { ipSpec 35 }
rlSourceAddressSelectionEntry OBJECT-TYPE
SYNTAX RlSourceAddressSelectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The row definition for this table."
INDEX { IMPLIED rlSourceAddressSelectionApp}
::= { rlSourceAddressSelectionTable 1 }
RlSourceAddressSelectionEntry ::= SEQUENCE {
rlSourceAddressSelectionApp DisplayString,
rlSourceAddressSelectionInterfaceIPv4 InterfaceIndexOrZero,
rlSourceAddressSelectionInterfaceIPv6 InterfaceIndexOrZero
}
rlSourceAddressSelectionApp OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..160))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The application which source interfaces are
defined in the entry."
::= { rlSourceAddressSelectionEntry 1 }
rlSourceAddressSelectionInterfaceIPv4 OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ifIndex value of source interface for IPv4 address.
Zero means the interface is undefined."
DEFVAL { 0 }
::= { rlSourceAddressSelectionEntry 2 }
rlSourceAddressSelectionInterfaceIPv6 OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ifIndex value of source interface for IPv6 address.
Zero means the interface is undefined."
DEFVAL { 0 }
::= { rlSourceAddressSelectionEntry 3 }
--
-- Internet Address Table (Private/Extension)
--
rlIpAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is parralel to MIB II ipAddressTable, and is used to
add/delete entries to/from that table.
The table contains addressing information relevant to the
entity's interfaces.
In addition to ipAddressTable defined in standard MIB a represenattion of
IPv6 addresses based on additionl address origin such as EUI-64, general
prefix etc.
In this case the address information is partial address information.
Together with the address origin and the general prefix (when needed) user can
construct full address information.
The index (key) for this table includes this information additionally to the address."
::= { ipSpec 36 }
rlIpAddressEntry OBJECT-TYPE
SYNTAX RlIpAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An address mapping for a particular interface."
INDEX { rlIpAddressAddrType,
rlIpAddressAddr,
rlIpAddressOrigin,
rlIpAddressGeneralPrefixName }
::= { rlIpAddressTable 1 }
RlIpAddressEntry ::= SEQUENCE {
rlIpAddressAddrType InetAddressType,
rlIpAddressAddr InetAddress,
rlIpAddressOrigin RlIpAddressOriginTC,
rlIpAddressGeneralPrefixName
DisplayString,
rlIpAddressIfIndex InterfaceIndex,
rlIpAddressExtdType INTEGER,
rlIpAddressPrefix RowPointer,
rlIpAddressStatus IpAddressStatusTC,
rlIpAddressCreated TimeStamp,
rlIpAddressLastChanged TimeStamp,
rlIpAddressRowStatus RowStatus,
rlIpAddressStorageType StorageType,
rlIpAddressExtdPrefixLength InetAddressPrefixLength,
rlIpAddressCompleteAddr InetAddress,
rlIpAddressOperStatus INTEGER
}
rlIpAddressAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of rlIpAddressAddr."
::= { rlIpAddressEntry 1 }
rlIpAddressAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address to which this entry's addressing information
pertains. The address type of this object is specified in
rlIpAddressAddrType.
In case of auto-configure address such as eui-64, general-prefix and others
it contains the partial address before appropriate manipulation.
Implementors need to be aware that if the size of
rlIpAddressAddr exceeds 116 octets, then OIDS of instances of
columns in this row will have more than 128 sub-identifiers
and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
Note:
Since interpeak doesn<73>t use origin, 3rd index (key) - rlIpAddressOrigin, as part of the key,
we assume that no same address can exists from different origins."
::= { rlIpAddressEntry 2 }
-- additional to standard MIB (1)
rlIpAddressOrigin OBJECT-TYPE
SYNTAX RlIpAddressOriginTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The origin of the address."
::= { rlIpAddressEntry 3 }
rlIpAddressGeneralPrefixName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name assigned to the prefix."
::= { rlIpAddressEntry 4 }
-- (1)
rlIpAddressIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index value that uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IF-MIB's ifIndex."
::= { rlIpAddressEntry 5 }
rlIpAddressExtdType OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
anycast(2),
broadcast(3),
multicast(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Extend standard field ipAddressType to multicast"
DEFVAL { unicast }
::= { rlIpAddressEntry 6 }
rlIpAddressPrefix OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A pointer to the row in the prefix table to which this
address belongs. May be { 0 0 } if there is no such row."
DEFVAL { zeroDotZero }
::= { rlIpAddressEntry 7 }
-- following filed has changed to a key (2)
-- rlIpAddressOrigin OBJECT-TYPE
-- SYNTAX IpAddressOriginTC
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The origin of the address."
-- ::= { rlIpAddressEntry 8 }
-- (2)
rlIpAddressStatus OBJECT-TYPE
SYNTAX IpAddressStatusTC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the address, describing if the address can be
used for communication.
In the absence of other information, an IPv4 address is
always preferred(1)."
DEFVAL { preferred }
::= { rlIpAddressEntry 8 }
rlIpAddressCreated OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time this entry was created.
If this entry was created prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value."
::= { rlIpAddressEntry 9 }
rlIpAddressLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time this entry was last
updated. If this entry was updated prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value."
::= { rlIpAddressEntry 10 }
rlIpAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
The RowStatus TC requires that this DESCRIPTION clause
states under which circumstances other objects in this row
can be modified. The value of this object has no effect on
whether other objects in this conceptual row can be
modified.
A conceptual row can not be made active until the
rlIpAddressIfIndex has been set to a valid index."
::= { rlIpAddressEntry 11 }
rlIpAddressStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. If this object
has a value of 'permanent', then no other objects are
required to be able to be modified."
DEFVAL { volatile }
::= { rlIpAddressEntry 12 }
-- additional fields - based on 'ipAddressEntry' augmentation (3)
rlIpAddressExtdPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The prefix length of this address."
DEFVAL { 64 }
::= { rlIpAddressEntry 13 }
rlIpAddressCompleteAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Complete IP address to which this entry's addressing information
pertains.
In case of auto-configure address such as eui-64, general-prefix and others
it contains the complete address after appropriate manipulation"
::= { rlIpAddressEntry 14 }
-- (3)
rlIpAddressOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the IP address."
::= { rlIpAddressEntry 15 }
rlIpDefaultDSCP OBJECT-TYPE
SYNTAX INTEGER(0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default value inserted into the DSCP
field of the IP header of datagrams originated at
this entity, whenever a DSCP value is not supplied
by the application."
::= { ipSpec 37 }
rlIpDefaultUP OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default value inserted into the User Priority
field in the 802.1q VLAN tag of IPv4 frames sent by the
CPU."
::= { ipSpec 38 }
rlIpv4MtuSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the maximum transmission unit (MTU) size in bytes of IPv4 packets (payload)."
::= { ipSpec 39 }
END