1148 lines
41 KiB
Plaintext
1148 lines
41 KiB
Plaintext
|
|
|
|
-- Teldat, S.A.
|
|
|
|
-- Parque Tecnológico de Madrid
|
|
|
|
-- 28760, Tres Cantos (Madrid)
|
|
|
|
-- Tlf: +34-918076565
|
|
|
|
-- Fax: +34-918076521
|
|
|
|
-- e-mail: id@teldat.com
|
|
|
|
|
|
-- Teldat private MIB
|
|
|
|
-- WLAN interface monitoring
|
|
|
|
|
|
-- History:
|
|
-- 02-11-15 P. Nogueira Client table
|
|
-- 19/05/14 Fernando Hernández XH 3740. WLAN Monitoring MIB
|
|
--------------------------------------------------------------------------------
|
|
|
|
TELDAT-MON-INTERF-WLAN-MIB
|
|
|
|
DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
MacAddress, DisplayString, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
telProdNpMonInterfRouter
|
|
FROM TELDAT-SW-STRUCTURE-MIB;
|
|
|
|
-- **********************************************************************
|
|
-- * Textual conventions
|
|
-- **********************************************************************
|
|
WlanRSSI ::= TEXTUAL-CONVENTION
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This type is used to represent receiver input levels in dBm."
|
|
SYNTAX INTEGER (-110..0)
|
|
|
|
WlanRate ::= TEXTUAL-CONVENTION
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This type is used to represent WLAN data rates in 500 Kbps units."
|
|
SYNTAX INTEGER (0..600)
|
|
|
|
-- Private monitoring of WLAN interface
|
|
|
|
telProdNpMonInterfWlan OBJECT IDENTIFIER ::= { telProdNpMonInterfRouter 24 }
|
|
|
|
|
|
-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
|
|
-- Radio table
|
|
-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
|
|
|
|
telProdNpMonInterfWlanRadioTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TelProdNpMonInterfWlanRadioEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The telProdNpMonInterfWlanRadioTable contains information relating to the
|
|
interfaces available on the system. Each entry corresponds to
|
|
an available WLAN interface. Entries cannot be added or
|
|
deleted by the user.
|
|
|
|
Creating entries: Entries are created by the system
|
|
automatically when a new WLAN module is installed.
|
|
|
|
Deleting entries: Entries are removed by the system
|
|
after the appropriate WLAN module is removed."
|
|
::= { telProdNpMonInterfWlan 1 }
|
|
|
|
telProdNpMonInterfWlanRadioEntry OBJECT-TYPE
|
|
SYNTAX TelProdNpMonInterfWlanRadioEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A base list of objects that are information about Wlan radio data.
|
|
The index is the number of the interface"
|
|
INDEX { telProdNpMonInterfWlanRadioIfIndex }
|
|
::= { telProdNpMonInterfWlanRadioTable 1 }
|
|
|
|
TelProdNpMonInterfWlanRadioEntry ::= SEQUENCE
|
|
{
|
|
telProdNpMonInterfWlanRadioIfIndex INTEGER,
|
|
telProdNpMonInterfWlanRadioIfMode INTEGER,
|
|
telProdNpMonInterfWlanRadioIfSpeed INTEGER,
|
|
telProdNpMonInterfWlanRadioIfChannel INTEGER,
|
|
telProdNpMonInterfWlanRadioIfRtsThreshold INTEGER,
|
|
telProdNpMonInterfWlanRadioIfTxPower INTEGER,
|
|
telProdNpMonInterfWlanRadioIfBand INTEGER,
|
|
telProdNpMonInterfWlanRadioIfCountry DisplayString,
|
|
telProdNpMonInterfWlanRadioIfAddress MacAddress,
|
|
telProdNpMonInterfWlanRadioIfRealChannel INTEGER,
|
|
telProdNpMonInterfWlanRadioIfFragmentThreshold INTEGER
|
|
}
|
|
|
|
telProdNpMonInterfWlanRadioIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unique radio index."
|
|
::= { telProdNpMonInterfWlanRadioEntry 1 }
|
|
|
|
telProdNpMonInterfWlanRadioIfMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mode-11a(1),
|
|
mode-11b(2),
|
|
mode-11g(4),
|
|
mode-11b-11g(6),
|
|
mode-11n(8),
|
|
mode-11a-11n(9),
|
|
mode-11g-11n(12),
|
|
mode-11b-11g-11n(14),
|
|
mode-11a-11b-11g-11n(15)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Mixed and compatibility modes between various 802.11 substandards."
|
|
::= { telProdNpMonInterfWlanRadioEntry 2 }
|
|
|
|
telProdNpMonInterfWlanRadioIfSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value defines the bitrate or the coding scheme to use for data frames."
|
|
::= { telProdNpMonInterfWlanRadioEntry 3 }
|
|
|
|
telProdNpMonInterfWlanRadioIfChannel OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The physical channel "
|
|
::= { telProdNpMonInterfWlanRadioEntry 4 }
|
|
|
|
telProdNpMonInterfWlanRadioIfRtsThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (-1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute shall indicate the number of octets in an
|
|
MPDU, below which an RTS/CTS handshake shall not be
|
|
performed, except as RTS/CTS is used as a cross modulation
|
|
protection mechanism. An RTS/CTS
|
|
handshake shall be performed at the beginning of any frame
|
|
exchange sequence where the MPDU is of type Data or
|
|
Management, the MPDU has an individual address in the
|
|
Address1 field, and the length of the MPDU is greater than
|
|
this threshold. Setting this attribute to be larger than the
|
|
maximum MSDU size shall have the effect of turning off the
|
|
RTS/CTS handshake for frames of Data or Management type
|
|
transmitted by this STA. Setting this attribute to one
|
|
shall have the effect of turning on the RTS/CTS handshake
|
|
for all frames of Data or Management type transmitted by
|
|
this STA."
|
|
::= { telProdNpMonInterfWlanRadioEntry 5 }
|
|
|
|
telProdNpMonInterfWlanRadioIfTxPower OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
UNITS "dBm"
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Transmitter output power in dBm."
|
|
::= { telProdNpMonInterfWlanRadioEntry 6 }
|
|
|
|
telProdNpMonInterfWlanRadioIfBand OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Frequency band."
|
|
::= { telProdNpMonInterfWlanRadioEntry 7 }
|
|
|
|
telProdNpMonInterfWlanRadioIfCountry OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..3))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute identifies the country in which the station is operating.
|
|
The first two octets of this string is the two character country code as
|
|
described in document ISO/IEC 3166-1. The third octet shall be one of the
|
|
following:
|
|
1. an ASCII space character, if the regulations under which the
|
|
station is operating encompass all environments in the country,
|
|
2. an ASCII 'O' character, if the regulations under which the
|
|
station is operating are for an Outdoor environment only, or
|
|
3. an ASCII 'I' character, if the regulations under which the
|
|
station is operating are for an Indoor environment only."
|
|
::= { telProdNpMonInterfWlanRadioEntry 8 }
|
|
|
|
telProdNpMonInterfWlanRadioIfAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The MAC Address."
|
|
::= { telProdNpMonInterfWlanRadioEntry 9 }
|
|
|
|
telProdNpMonInterfWlanRadioIfRealChannel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The actually selected channel for transmit and receive.
|
|
In most cases this is the same value as wlanIfChannel,
|
|
except if automatic channel selection is active. In this
|
|
case, this variable shows the channel in use."
|
|
::= { telProdNpMonInterfWlanRadioEntry 10 }
|
|
|
|
telProdNpMonInterfWlanRadioIfFragmentThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (256..8000)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute shall specify the mandatory maximum size, in
|
|
octets, of the PSDU that may be delivered to the PHY.
|
|
This maximum size does not apply in the case of A-MPDU. An
|
|
MSDU, A-MSDU or MMPDU shall be broken into fragments if its
|
|
size exceeds the value of this attribute after adding MAC
|
|
headers and trailers. An MSDU, A-MSDU or MMPDU shall be
|
|
fragmented when the resulting frame has an individual address
|
|
in the Address1 field, and the length of the frame is larger
|
|
than this threshold. The default value for this attribute
|
|
shall be the lesser of 8000 or the aMPDUMaxLength or the
|
|
aPSDUMaxLength of the attached PHY and shall never exceed the
|
|
lesser of 8000 or the aMPDUMaxLength or the
|
|
aPSDUMaxLength of the attached PHY. The value of this
|
|
attribute shall never be less than 256."
|
|
::= { telProdNpMonInterfWlanRadioEntry 11 }
|
|
|
|
|
|
-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
|
|
-- BSS table
|
|
-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
|
|
|
|
telProdNpMonInterfWlanBSSTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TelProdNpMonInterfWlanBSSEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" Describes a WLAN VSS and the corresponding settings"
|
|
::= { telProdNpMonInterfWlan 2 }
|
|
|
|
telProdNpMonInterfWlanBSSEntry OBJECT-TYPE
|
|
SYNTAX TelProdNpMonInterfWlanBSSEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A base list of objects that are information about BSS data.
|
|
The index is the number of the interface"
|
|
INDEX { telProdNpMonInterfWlanBSSIfIndex }
|
|
::= { telProdNpMonInterfWlanBSSTable 1 }
|
|
|
|
TelProdNpMonInterfWlanBSSEntry ::= SEQUENCE
|
|
{
|
|
telProdNpMonInterfWlanBSSIfIndex INTEGER,
|
|
telProdNpMonInterfWlanBSSId DisplayString,
|
|
telProdNpMonInterfWlanBSSPrivInvoked INTEGER,
|
|
telProdNpMonInterfWlanBSSRsn INTEGER,
|
|
telProdNpMonInterfWlanBSSAkm INTEGER,
|
|
telProdNpMonInterfWlanBSSCipher INTEGER,
|
|
telProdNpMonInterfWlanBSSDefaultKey INTEGER,
|
|
telProdNpMonInterfWlanBSSKey1 OCTET STRING,
|
|
telProdNpMonInterfWlanBSSKey2 OCTET STRING,
|
|
telProdNpMonInterfWlanBSSKey3 OCTET STRING,
|
|
telProdNpMonInterfWlanBSSKey4 OCTET STRING,
|
|
telProdNpMonInterfWlanBSSMaxAsoc INTEGER,
|
|
telProdNpMonInterfWlanBSSAcl INTEGER,
|
|
telProdNpMonInterfWlanBSSClientIsolation INTEGER,
|
|
telProdNpMonInterfWlanBSSHidden INTEGER,
|
|
telProdNpMonInterfWlanBSSBssId MacAddress,
|
|
telProdNpMonInterfWlanBSSBeaconPeriod INTEGER,
|
|
telProdNpMonInterfWlanBSSDTIMPeriod INTEGER,
|
|
telProdNpMonInterfWlanBSSMSDUTx Counter32,
|
|
telProdNpMonInterfWlanBSSMSDURx Counter32,
|
|
telProdNpMonInterfWlanBSSBytesTx Counter32,
|
|
telProdNpMonInterfWlanBSSBytesRx Counter32,
|
|
telProdNpMonInterfWlanBSSCurrent INTEGER,
|
|
telProdNpMonInterfWlanBSSOpMode INTEGER,
|
|
telProdNpMonInterfwlanBSSPassPhrase OCTET STRING
|
|
}
|
|
|
|
telProdNpMonInterfWlanBSSIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Unique BSS index."
|
|
::= { telProdNpMonInterfWlanBSSEntry 1 }
|
|
|
|
telProdNpMonInterfWlanBSSId OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute reflects the SSID."
|
|
::= { telProdNpMonInterfWlanBSSEntry 2 }
|
|
|
|
telProdNpMonInterfWlanBSSPrivInvoked OBJECT-TYPE
|
|
SYNTAX INTEGER { none(1), enable(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Privacy invoked. If enabled, some level of security is invoked
|
|
when transmitting data frames."
|
|
::= { telProdNpMonInterfWlanBSSEntry 3 }
|
|
|
|
telProdNpMonInterfWlanBSSRsn OBJECT-TYPE
|
|
SYNTAX INTEGER { wpa(0), wpa2(1), none(2), wpa-wpa2(3) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Robust Security Network setting."
|
|
::= { telProdNpMonInterfWlanBSSEntry 4 }
|
|
|
|
telProdNpMonInterfWlanBSSAkm OBJECT-TYPE
|
|
SYNTAX INTEGER { dot1x(0), psk(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Authenticated Key Management setting."
|
|
::= { telProdNpMonInterfWlanBSSEntry 5 }
|
|
|
|
telProdNpMonInterfWlanBSSCipher OBJECT-TYPE
|
|
SYNTAX INTEGER { none(0), auto(1), wep(2), tkip(3), aes-ccm(4) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ciphers in use for WPA or WPA2.
|
|
auto(1) is used for TKIP and AES"
|
|
::= { telProdNpMonInterfWlanBSSEntry 6 }
|
|
|
|
telProdNpMonInterfWlanBSSDefaultKey OBJECT-TYPE
|
|
SYNTAX INTEGER { key1(1), key2(2), key3(3), key4(4) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Default key for WEP encryption. This is the key used
|
|
to transmit data frames if WEP is enabled"
|
|
::= { telProdNpMonInterfWlanBSSEntry 7 }
|
|
|
|
telProdNpMonInterfWlanBSSKey1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..64))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Key string for WEP key number 1."
|
|
::= { telProdNpMonInterfWlanBSSEntry 8 }
|
|
|
|
telProdNpMonInterfWlanBSSKey2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..33))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Key string for WEP key number 2."
|
|
::= { telProdNpMonInterfWlanBSSEntry 9 }
|
|
|
|
telProdNpMonInterfWlanBSSKey3 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..33))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Key string for WEP key number 3."
|
|
::= { telProdNpMonInterfWlanBSSEntry 10 }
|
|
|
|
telProdNpMonInterfWlanBSSKey4 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..33))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Key string for WEP key number 4."
|
|
::= { telProdNpMonInterfWlanBSSEntry 11 }
|
|
|
|
telProdNpMonInterfWlanBSSMaxAsoc OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of allowed clients of the requested BSS."
|
|
::= { telProdNpMonInterfWlanBSSEntry 12 }
|
|
|
|
telProdNpMonInterfWlanBSSAcl OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), deny-entries(1), allow-entries(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MAC Media Access Control via MAC Address."
|
|
::= { telProdNpMonInterfWlanBSSEntry 13 }
|
|
|
|
telProdNpMonInterfWlanBSSClientIsolation OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Client isolation setting."
|
|
::= { telProdNpMonInterfWlanBSSEntry 14 }
|
|
|
|
telProdNpMonInterfWlanBSSHidden OBJECT-TYPE
|
|
SYNTAX INTEGER { yes(2), no(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Define whether SSID is hidden (yes(2)) or not (no(1))."
|
|
::= { telProdNpMonInterfWlanBSSEntry 15 }
|
|
|
|
telProdNpMonInterfWlanBSSBssId OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object contains the actual current BSSID for the service set."
|
|
::= { telProdNpMonInterfWlanBSSEntry 16 }
|
|
|
|
telProdNpMonInterfWlanBSSBeaconPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute shall specify the number of TU that a
|
|
station shall use for scheduling Beacon transmissions.
|
|
This value is transmitted in Beacon and Probe Response
|
|
frames."
|
|
::= { telProdNpMonInterfWlanBSSEntry 17 }
|
|
|
|
telProdNpMonInterfWlanBSSDTIMPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute shall specify the number of beacon
|
|
intervals that shall elapse between transmission of
|
|
Beacons frames containing a TIM element whose DTIM
|
|
Count field is 0. This value is transmitted in
|
|
the DTIM Period field of Beacon frames."
|
|
::= { telProdNpMonInterfWlanBSSEntry 18 }
|
|
|
|
telProdNpMonInterfWlanBSSMSDUTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute counts the total number of
|
|
packets transmitted on this BSS."
|
|
::= { telProdNpMonInterfWlanBSSEntry 19 }
|
|
|
|
telProdNpMonInterfWlanBSSMSDURx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute counts the total number of
|
|
packets received by this BSS."
|
|
::= { telProdNpMonInterfWlanBSSEntry 20 }
|
|
|
|
telProdNpMonInterfWlanBSSBytesTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Transmitted Bytes."
|
|
::= { telProdNpMonInterfWlanBSSEntry 21 }
|
|
|
|
telProdNpMonInterfWlanBSSBytesRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Received Bytes."
|
|
::= { telProdNpMonInterfWlanBSSEntry 22 }
|
|
|
|
telProdNpMonInterfWlanBSSCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of current associated stations"
|
|
::= { telProdNpMonInterfWlanBSSEntry 23 }
|
|
|
|
telProdNpMonInterfWlanBSSOpMode OBJECT-TYPE
|
|
SYNTAX INTEGER { access-point(0), station(1), wbr(2), repeater(3) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value specify that the scan properties is used for AP,
|
|
client or wds."
|
|
::= { telProdNpMonInterfWlanBSSEntry 24 }
|
|
|
|
telProdNpMonInterfwlanBSSPassPhrase OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..64))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Passphrase string for WPA-PSK and WPA2-PSK."
|
|
::= { telProdNpMonInterfWlanBSSEntry 25 }
|
|
|
|
|
|
-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
|
|
-- Station table
|
|
-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
|
|
|
|
telProdNpMonInterfWlanStationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TelProdNpMonInterfWlanStationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The telProdNpMonInterfWlanStation contains information relating to the
|
|
clients currently associated to our access points.
|
|
Each entry corresponds to
|
|
an associated client station (STA).
|
|
Entries cannot be added or deleted by the user.
|
|
|
|
Creating entries: Entries are created by the system
|
|
automatically when a new STA ia associated.
|
|
|
|
Deleting entries: Entries are removed by the system
|
|
whenever an associated STA is removed."
|
|
::= { telProdNpMonInterfWlan 3 }
|
|
|
|
telProdNpMonInterfWlanStationEntry OBJECT-TYPE
|
|
SYNTAX TelProdNpMonInterfWlanStationEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A base list of objects that are information about stations.
|
|
The index is the number of the interface and the MAC address of the station"
|
|
INDEX { telProdNpMonInterfWlanStationIfIndex, telProdNpMonInterfWlanStationAddress }
|
|
::= { telProdNpMonInterfWlanStationTable 1 }
|
|
|
|
TelProdNpMonInterfWlanStationEntry ::= SEQUENCE
|
|
{
|
|
telProdNpMonInterfWlanStationIfIndex INTEGER,
|
|
telProdNpMonInterfWlanStationAddress MacAddress,
|
|
telProdNpMonInterfWlanStationState INTEGER,
|
|
telProdNpMonInterfWlanStationSecurity INTEGER,
|
|
telProdNpMonInterfWlanStationNode INTEGER,
|
|
telProdNpMonInterfWlanStationMSDUTx Counter32,
|
|
telProdNpMonInterfWlanStationMSDURx Counter32,
|
|
telProdNpMonInterfWlanStationBytesRx Counter32,
|
|
telProdNpMonInterfWlanStationBytesTx Counter32,
|
|
telProdNpMonInterfWlanStationRate WlanRate,
|
|
telProdNpMonInterfWlanStationSignal WlanRSSI,
|
|
telProdNpMonInterfWlanStationNoise WlanRSSI,
|
|
telProdNpMonInterfWlanStationConnectTime Counter32
|
|
}
|
|
|
|
telProdNpMonInterfWlanStationIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Interface number."
|
|
::= { telProdNpMonInterfWlanStationEntry 1 }
|
|
|
|
telProdNpMonInterfWlanStationAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"MAC Address of the Assigned STA."
|
|
::= { telProdNpMonInterfWlanStationEntry 2 }
|
|
|
|
telProdNpMonInterfWlanStationState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Station state."
|
|
::= { telProdNpMonInterfWlanStationEntry 3 }
|
|
|
|
telProdNpMonInterfWlanStationSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
wep40(2),
|
|
wep104(3),
|
|
wpa-psk(4),
|
|
wpa(5),
|
|
wpa2(6),
|
|
wpa2-psk(7)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Security Option of the Station."
|
|
::= { telProdNpMonInterfWlanStationEntry 4 }
|
|
|
|
telProdNpMonInterfWlanStationNode OBJECT-TYPE
|
|
SYNTAX INTEGER { unknown(1), access-point(2), client(3) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Node type of the Station."
|
|
::= { telProdNpMonInterfWlanStationEntry 5 }
|
|
|
|
telProdNpMonInterfWlanStationMSDUTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute counts the total number of
|
|
packets transmitted to this station."
|
|
::= { telProdNpMonInterfWlanStationEntry 6 }
|
|
|
|
telProdNpMonInterfWlanStationMSDURx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute counts the total number of
|
|
packets received from this station."
|
|
::= { telProdNpMonInterfWlanStationEntry 7 }
|
|
|
|
telProdNpMonInterfWlanStationBytesTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute counts the total number of
|
|
octets transmitted to this station."
|
|
::= { telProdNpMonInterfWlanStationEntry 8 }
|
|
|
|
telProdNpMonInterfWlanStationBytesRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute counts the total number of
|
|
octets received from this station."
|
|
::= { telProdNpMonInterfWlanStationEntry 9 }
|
|
|
|
telProdNpMonInterfWlanStationRate OBJECT-TYPE
|
|
SYNTAX WlanRate
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute reflects the data rate of the latest
|
|
packet received from this station, in 500 kbps units."
|
|
::= { telProdNpMonInterfWlanStationEntry 10 }
|
|
|
|
telProdNpMonInterfWlanStationSignal OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute shows the received signal strength in dBm."
|
|
::= { telProdNpMonInterfWlanStationEntry 11 }
|
|
|
|
telProdNpMonInterfWlanStationNoise OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute shows the measured noise level in dBm, or
|
|
0 if no connection can be established."
|
|
::= { telProdNpMonInterfWlanStationEntry 12 }
|
|
|
|
telProdNpMonInterfWlanStationConnectTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "s"
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute records the system uptime at the moment
|
|
the client successfully finished association."
|
|
::= { telProdNpMonInterfWlanStationEntry 13 }
|
|
|
|
|
|
-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
|
|
-- ACL table
|
|
-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
|
|
|
|
telProdNpMonInterfWlanACLTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TelProdNpMonInterfWlanACLEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The WLAN Access List based on MAC Addresses"
|
|
::= { telProdNpMonInterfWlan 4 }
|
|
|
|
telProdNpMonInterfWlanACLEntry OBJECT-TYPE
|
|
SYNTAX TelProdNpMonInterfWlanACLEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The WLAN Access List based on MAC Addresses entry.
|
|
Index: telProdNpMonInterfWlanACLIfIndex telProdNpMonInterfWlanACLAddress."
|
|
INDEX { telProdNpMonInterfWlanACLIfIndex, telProdNpMonInterfWlanACLAddress }
|
|
::= { telProdNpMonInterfWlanACLTable 1 }
|
|
|
|
TelProdNpMonInterfWlanACLEntry ::= SEQUENCE
|
|
{
|
|
telProdNpMonInterfWlanACLIfIndex INTEGER,
|
|
telProdNpMonInterfWlanACLAddress MacAddress
|
|
}
|
|
|
|
telProdNpMonInterfWlanACLIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Interface the MAC Address belongs."
|
|
::= { telProdNpMonInterfWlanACLEntry 1 }
|
|
|
|
telProdNpMonInterfWlanACLAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The MAC Address for the accepted client"
|
|
::= { telProdNpMonInterfWlanACLEntry 2 }
|
|
|
|
|
|
-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
|
|
-- Scan results table
|
|
-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
|
|
|
|
telProdNpMonInterfWlanScanResultsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TelProdNpMonInterfWlanScanResultsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the list of BSS entries found by foreground
|
|
or background scanning in client mode."
|
|
::= { telProdNpMonInterfWlan 5 }
|
|
|
|
telProdNpMonInterfWlanScanResultsEntry OBJECT-TYPE
|
|
SYNTAX TelProdNpMonInterfWlanScanResultsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A entry of the table.
|
|
Index: telProdNpMonInterfWlanScanResultsIfIndex, telProdNpMonInterfWlanScanResultsIndex"
|
|
INDEX { telProdNpMonInterfWlanScanResultsIfIndex, telProdNpMonInterfWlanScanResultsIndex }
|
|
::= { telProdNpMonInterfWlanScanResultsTable 1 }
|
|
|
|
TelProdNpMonInterfWlanScanResultsEntry ::= SEQUENCE
|
|
{
|
|
telProdNpMonInterfWlanScanResultsIfIndex INTEGER,
|
|
telProdNpMonInterfWlanScanResultsIndex INTEGER,
|
|
telProdNpMonInterfWlanScanResultsBSSID MacAddress,
|
|
telProdNpMonInterfWlanScanResultsSSID DisplayString,
|
|
telProdNpMonInterfWlanScanResultsChannel INTEGER,
|
|
telProdNpMonInterfWlanScanResultsSignal WlanRSSI,
|
|
telProdNpMonInterfWlanScanResultsNoise WlanRSSI,
|
|
telProdNpMonInterfWlanScanResultsBeaconPeriod INTEGER,
|
|
telProdNpMonInterfWlanScanResultsRates DisplayString,
|
|
telProdNpMonInterfWlanScanResultsBasicRates DisplayString,
|
|
telProdNpMonInterfWlanScanResultsExtendedRates DisplayString
|
|
}
|
|
|
|
telProdNpMonInterfWlanScanResultsIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ifIndex of the WLAN Interface the scan results belong to."
|
|
::= { telProdNpMonInterfWlanScanResultsEntry 1 }
|
|
|
|
telProdNpMonInterfWlanScanResultsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Auxiliary index for different BSS entries."
|
|
::= { telProdNpMonInterfWlanScanResultsEntry 2 }
|
|
|
|
telProdNpMonInterfWlanScanResultsBSSID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"BSSID of this BSS."
|
|
::= { telProdNpMonInterfWlanScanResultsEntry 3 }
|
|
|
|
telProdNpMonInterfWlanScanResultsSSID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"SSID aka network name of this BSS.
|
|
If broadcasting of SSID is disabled on this
|
|
BSS, this string may be empty."
|
|
::= { telProdNpMonInterfWlanScanResultsEntry 4 }
|
|
|
|
telProdNpMonInterfWlanScanResultsChannel OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The channel this BSS was received on."
|
|
::= { telProdNpMonInterfWlanScanResultsEntry 5 }
|
|
|
|
telProdNpMonInterfWlanScanResultsSignal OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Receive signal strength of this BSS."
|
|
::= { telProdNpMonInterfWlanScanResultsEntry 6 }
|
|
|
|
telProdNpMonInterfWlanScanResultsNoise OBJECT-TYPE
|
|
SYNTAX WlanRSSI
|
|
UNITS "dBm"
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute shows the measured noise level in dBm, or
|
|
0 when this value is not available.
|
|
It's the value measured during the last reception of data."
|
|
::= { telProdNpMonInterfWlanScanResultsEntry 7 }
|
|
|
|
telProdNpMonInterfWlanScanResultsBeaconPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute contains the number of TU that this
|
|
BSS uses for scheduling Beacon transmissions."
|
|
::= { telProdNpMonInterfWlanScanResultsEntry 8 }
|
|
|
|
telProdNpMonInterfWlanScanResultsRates OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute contains one octet for each
|
|
supported rate in this BSS, in Mbps units."
|
|
::= { telProdNpMonInterfWlanScanResultsEntry 9 }
|
|
|
|
telProdNpMonInterfWlanScanResultsBasicRates OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute contains one octet for each required
|
|
basic rate in this BSS, in Mbps units."
|
|
::= { telProdNpMonInterfWlanScanResultsEntry 10 }
|
|
|
|
telProdNpMonInterfWlanScanResultsExtendedRates OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute contains one octet for each supported
|
|
extended rate in this BSS, in Mbps units."
|
|
::= { telProdNpMonInterfWlanScanResultsEntry 11 }
|
|
|
|
|
|
|
|
-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
|
|
-- WMM table
|
|
-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
|
|
|
|
telProdNpMonInterfWlanWMMTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TelProdNpMonInterfWlanWMMEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Describes a WLAN WMM Access category settings"
|
|
::= { telProdNpMonInterfWlan 6 }
|
|
|
|
telProdNpMonInterfWlanWMMEntry OBJECT-TYPE
|
|
SYNTAX TelProdNpMonInterfWlanWMMEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A entry of the table.
|
|
Index: telProdNpMonInterfWlanWMMAccCat, telProdNpMonInterfWlanWMMwlanIf, telProdNpMonInterfWlanWMMType "
|
|
INDEX { telProdNpMonInterfWlanWMMAccCat, telProdNpMonInterfWlanWMMwlanIf, telProdNpMonInterfWlanWMMType }
|
|
::= { telProdNpMonInterfWlanWMMTable 1 }
|
|
|
|
TelProdNpMonInterfWlanWMMEntry ::= SEQUENCE
|
|
{
|
|
telProdNpMonInterfWlanWMMAccCat INTEGER,
|
|
telProdNpMonInterfWlanWMMwlanIf INTEGER,
|
|
telProdNpMonInterfWlanWMMaCWmin INTEGER,
|
|
telProdNpMonInterfWlanWMMaCWmax INTEGER,
|
|
telProdNpMonInterfWlanWMMAifsn INTEGER,
|
|
telProdNpMonInterfWlanWMMTxopLimit INTEGER,
|
|
telProdNpMonInterfWlanWMMAckPolicy INTEGER,
|
|
telProdNpMonInterfWlanWMMACM INTEGER,
|
|
telProdNpMonInterfWlanWMMType INTEGER
|
|
}
|
|
|
|
telProdNpMonInterfWlanWMMwlanIf OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Radio index the AC belongs to."
|
|
::= { telProdNpMonInterfWlanWMMEntry 1 }
|
|
|
|
telProdNpMonInterfWlanWMMAccCat OBJECT-TYPE
|
|
SYNTAX INTEGER { besteffort(1), background(2), video(3), voice(4) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Access category type, each category is mandatory for a wlanIf.
|
|
|
|
An access category (AC) is a label for the common set of enhanced
|
|
distributed channel access (EDCA) parameters that are used by a
|
|
quality of service (QoS) station (QSTA) to contend for the channel
|
|
in order to transmit medium access control (MAC) service data
|
|
units (MSDUs) with certain priorities.
|
|
|
|
(More info in '802.11E / 3.123 access category (AC)').
|
|
|
|
besteffort(1): standard/default priority
|
|
background(2): low priority
|
|
video(3): medium priority (higher than 'besteffort')
|
|
voice(4): high priority"
|
|
::= { telProdNpMonInterfWlanWMMEntry 2 }
|
|
|
|
telProdNpMonInterfWlanWMMType OBJECT-TYPE
|
|
SYNTAX INTEGER { access-point(1), station(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Type to which this telProdNpMonInterfWlanWMMEntry corresponds.
|
|
Type access-point means the own parameters for WMM are changed.
|
|
The entries with type station will be provided to the connected
|
|
stations via WMM-IE."
|
|
::= { telProdNpMonInterfWlanWMMEntry 3 }
|
|
|
|
telProdNpMonInterfWlanWMMaCWmin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Minimum size of contention window.
|
|
for AC_BK and AC_BE telProdNpMonInterfWlanWMMaCWmin = telProdNpMonInterfWlanIfCWmin,
|
|
for AC_VI telProdNpMonInterfWlanWMMaCWmin = (telProdNpMonInterfWlanIfCWmin-1)/2,
|
|
for AC_VO telProdNpMonInterfWlanWMMaCWmin = (telProdNpMonInterfWlanIfCWmin-3)/4."
|
|
::= { telProdNpMonInterfWlanWMMEntry 4 }
|
|
|
|
telProdNpMonInterfWlanWMMaCWmax OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Maximum size of contention window.
|
|
for AC_BK telProdNpMonInterfWlanWMMaCWmax = telProdNpMonInterfWlanIfCWmax,
|
|
for AC_BE telProdNpMonInterfWlanWMMaCWmax = 4*telProdNpMonInterfWlanIfCWmin + 3,
|
|
for AC_VI telProdNpMonInterfWlanWMMaCWmax = telProdNpMonInterfWlanIfCWmin,
|
|
for AC_VO telProdNpMonInterfWlanWMMaCWmax = (telProdNpMonInterfWlanIfCWmin-1)/2."
|
|
::= { telProdNpMonInterfWlanWMMEntry 5 }
|
|
|
|
telProdNpMonInterfWlanWMMAifsn OBJECT-TYPE
|
|
SYNTAX INTEGER (0..99)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Arbitration Inter-Frame Space Number (AIFSN)
|
|
for this Access category."
|
|
::= { telProdNpMonInterfWlanWMMEntry 6 }
|
|
|
|
telProdNpMonInterfWlanWMMTxopLimit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..9999)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"802.11 mode Transmit Opportunity Limit. The TxopLimit
|
|
value is given in units of 32 microseconds."
|
|
::= { telProdNpMonInterfWlanWMMEntry 7 }
|
|
|
|
telProdNpMonInterfWlanWMMAckPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER { ack(1), noAck(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Ack policy for this Access category (default value is 'ack(1)')."
|
|
::= { telProdNpMonInterfWlanWMMEntry 8 }
|
|
|
|
telProdNpMonInterfWlanWMMACM OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ACM (admission control) policy for this Access category i
|
|
(default value is 'disabled(2)')."
|
|
::= { telProdNpMonInterfWlanWMMEntry 9 }
|
|
|
|
|
|
-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
|
|
-- Client table
|
|
-- = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
|
|
telProdNpMonInterfWlanClientTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TelProdNpMonInterfWlanClientEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" Describes a WLAN Client and the corresponding
|
|
settings"
|
|
::= { telProdNpMonInterfWlan 7 }
|
|
|
|
telProdNpMonInterfwlanClientEntry OBJECT-TYPE
|
|
SYNTAX TelProdNpMonInterfWlanClientEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A base list of objects with information about the networks the
|
|
WLAN can connect to when acting as a client.
|
|
The indexes are the number of the WLAN interface and the network
|
|
index"
|
|
INDEX { telProdNpMonInterfWlanClientIfIndex, telProdNpMonInterfWlanClientSSID}
|
|
::= { telProdNpMonInterfWlanClientTable 1 }
|
|
|
|
TelProdNpMonInterfWlanClientEntry ::= SEQUENCE
|
|
{
|
|
telProdNpMonInterfWlanClientIfIndex INTEGER,
|
|
telProdNpMonInterfWlanClientSSID DisplayString,
|
|
telProdNpMonInterfWlanClientPriority INTEGER,
|
|
telProdNpMonInterfWlanClientPrivInvoked INTEGER,
|
|
telProdNpMonInterfWlanClientRsn INTEGER,
|
|
telProdNpMonInterfWlanClientAkm INTEGER,
|
|
telProdNpMonInterfWlanClientCipher INTEGER,
|
|
telProdNpMonInterfWlanClientDefaultKey INTEGER,
|
|
telProdNpMonInterfWlanClientKey1 OCTET STRING,
|
|
telProdNpMonInterfWlanClientKey2 OCTET STRING,
|
|
telProdNpMonInterfWlanClientKey3 OCTET STRING,
|
|
telProdNpMonInterfWlanClientKey4 OCTET STRING,
|
|
telProdNpMonInterfwlanClientPassPhrase OCTET STRING
|
|
}
|
|
|
|
telProdNpMonInterfWlanClientIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"WLAN interface index."
|
|
DEFVAL { 0 }
|
|
::= { telProdNpMonInterfwlanClientEntry 1 }
|
|
|
|
telProdNpMonInterfWlanClientSSID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Service Set Name"
|
|
::= { telProdNpMonInterfwlanClientEntry 2 }
|
|
|
|
telProdNpMonInterfWlanClientPriority OBJECT-TYPE
|
|
SYNTAX INTEGER { none(1), enable(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Priority of the network. The higher the priority,
|
|
the sooner the client tries to associate with it."
|
|
::= { telProdNpMonInterfwlanClientEntry 3 }
|
|
|
|
telProdNpMonInterfWlanClientPrivInvoked OBJECT-TYPE
|
|
SYNTAX INTEGER { none(1), enable(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Privacy invoked. If enabled, some level of security is invoked
|
|
when transmitting data frames."
|
|
::= { telProdNpMonInterfwlanClientEntry 4 }
|
|
|
|
telProdNpMonInterfWlanClientRsn OBJECT-TYPE
|
|
SYNTAX INTEGER { wpa(0), wpa2(1), none(2), wpa-wpa2(3) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Robust Security Network settings."
|
|
::= { telProdNpMonInterfwlanClientEntry 5 }
|
|
|
|
telProdNpMonInterfWlanClientAkm OBJECT-TYPE
|
|
SYNTAX INTEGER { dot1x(0), psk(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Authenticated Key Management setting."
|
|
::= { telProdNpMonInterfwlanClientEntry 6 }
|
|
|
|
telProdNpMonInterfWlanClientCipher OBJECT-TYPE
|
|
SYNTAX INTEGER { none(0), auto(1), wep(2), tkip(3), aes-ccm(4) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ciphers in use for WPA or WPA2.
|
|
auto(1) is used for TKIP and AES"
|
|
::= { telProdNpMonInterfwlanClientEntry 7 }
|
|
|
|
telProdNpMonInterfWlanClientDefaultKey OBJECT-TYPE
|
|
SYNTAX INTEGER { key1(1), key2(2), key3(3), key4(4) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Default key for WEP encryption. This is the key used
|
|
to transmit data frames if WEP is enabled"
|
|
::= { telProdNpMonInterfwlanClientEntry 8 }
|
|
|
|
telProdNpMonInterfWlanClientKey1 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..33))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Key string for WEP key number 1."
|
|
::= { telProdNpMonInterfwlanClientEntry 9 }
|
|
|
|
telProdNpMonInterfWlanClientKey2 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..33))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Key string for WEP key number 2."
|
|
::= { telProdNpMonInterfwlanClientEntry 10 }
|
|
|
|
telProdNpMonInterfWlanClientKey3 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..33))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Key string for WEP key number 3."
|
|
::= { telProdNpMonInterfwlanClientEntry 11 }
|
|
|
|
telProdNpMonInterfWlanClientKey4 OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..33))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Key string for WEP key number 4."
|
|
::= { telProdNpMonInterfwlanClientEntry 12 }
|
|
|
|
telProdNpMonInterfwlanClientPassPhrase OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..64))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Passphrase string for WPA-PSK and WPA2-PSK."
|
|
::= { telProdNpMonInterfwlanClientEntry 13 }
|
|
|
|
END
|