588 lines
21 KiB
Plaintext
588 lines
21 KiB
Plaintext
-- ***********************************************************************************************
|
|
-- TN-DEV-SYS-SNMPMGMT-MIB.smi: Transition Networks Enterprise MIB for TN snmp management feature
|
|
--
|
|
-- Copyright (c) 2014 by Transition Networks, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- ***********************************************************************************************
|
|
--
|
|
TN-DEV-SYS-SNMPMGMT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32 FROM SNMPv2-SMI
|
|
DisplayString, RowStatus, TDomain, TAddress FROM SNMPv2-TC
|
|
InetAddressType, InetAddress FROM INET-ADDRESS-MIB
|
|
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
|
|
entPhysicalIndex FROM ENTITY-MIB
|
|
tnDevMgmt FROM TN-MGMT-MIB
|
|
SnmpEngineID FROM SNMP-FRAMEWORK-MIB
|
|
PortList FROM Q-BRIDGE-MIB;
|
|
|
|
tnDevSysSnmpmgmt MODULE-IDENTITY
|
|
LAST-UPDATED "201402190000Z"
|
|
ORGANIZATION "Transition Networks, Inc."
|
|
CONTACT-INFO
|
|
" Transition Networks
|
|
Technical Support
|
|
10900 Red Circle Drive
|
|
Minnetonka, MN 55343 USA
|
|
Tel: +1-800-526-9267
|
|
|
|
E-mail: techsupport@transition.com"
|
|
|
|
DESCRIPTION
|
|
"The mib provides functionalities for SNMP managing in TN modules."
|
|
|
|
REVISION "201402190000Z"
|
|
DESCRIPTION
|
|
"Added tnDevSysSnmpTrapCfgVersion, tnDevSysSnmpTrapCfgInformMode,
|
|
tnDevSysSnmpTrapCfgInformTimeout, tnDevSysSnmpTrapCfgInformRetry to
|
|
tnDevSysSnmpTrapCfgTable."
|
|
|
|
REVISION "201305160000Z"
|
|
DESCRIPTION
|
|
"Initial Revision of this module"
|
|
::= { tnDevMgmt 14 }
|
|
|
|
|
|
tnDevSysSnmpMgmtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnDevSysSnmpMgmtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table to manage SNMP status for each device."
|
|
::= { tnDevSysSnmpmgmt 1 }
|
|
|
|
tnDevSysSnmpMgmtEntry OBJECT-TYPE
|
|
SYNTAX TnDevSysSnmpMgmtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing SNMP status for each device."
|
|
INDEX { entPhysicalIndex }
|
|
::= { tnDevSysSnmpMgmtTable 1 }
|
|
|
|
TnDevSysSnmpMgmtEntry ::=
|
|
SEQUENCE {
|
|
tnDevSysSnmpAccess INTEGER,
|
|
tnDevSysSnmpVersion DisplayString,
|
|
tnDevSysSnmpReadCommunity DisplayString,
|
|
tnDevSysSnmpWriteCommunity DisplayString
|
|
}
|
|
|
|
tnDevSysSnmpAccess OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The status of SNMP. Set this value to enabled(1) to enable SNMP access,
|
|
set this value to disabled(2) to disable the SNMP access."
|
|
::= { tnDevSysSnmpMgmtEntry 1 }
|
|
|
|
tnDevSysSnmpVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..8))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The current active SNMP version. Possible versions are:
|
|
v1: SNMP supported version 1.
|
|
v2c: SNMP supported version 2c.
|
|
v3: SNMP supported version 3."
|
|
::= { tnDevSysSnmpMgmtEntry 2 }
|
|
|
|
tnDevSysSnmpReadCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The SNMP Read-community string. Valid in v1/v2c version, default value is 'public'."
|
|
::= { tnDevSysSnmpMgmtEntry 3 }
|
|
|
|
tnDevSysSnmpWriteCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The SNMP Write-community string. Valid in v1/v2c version, default value is 'private'."
|
|
::= { tnDevSysSnmpMgmtEntry 4 }
|
|
|
|
tnDevSysSnmpLocal OBJECT IDENTIFIER ::= { tnDevSysSnmpmgmt 3 }
|
|
|
|
tnDevSysSnmpLocalEngineID OBJECT-TYPE
|
|
SYNTAX SnmpEngineID
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The SNMPv3 engine ID."
|
|
::= { tnDevSysSnmpLocal 1 }
|
|
|
|
tnDevSysSnmpTrapManagerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnDevSysSnmpTrapManagerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table to maintain the engine IDs of the SNMPv3 trap managers."
|
|
::= { tnDevSysSnmpmgmt 4 }
|
|
|
|
tnDevSysSnmpTrapManagerEntry OBJECT-TYPE
|
|
SYNTAX TnDevSysSnmpTrapManagerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in this table, containing the engineID
|
|
of a SNMPv3 trap manager."
|
|
INDEX { tnDevSysSnmpTrapManagerIndex }
|
|
::= { tnDevSysSnmpTrapManagerTable 1 }
|
|
|
|
TnDevSysSnmpTrapManagerEntry ::= SEQUENCE
|
|
{
|
|
tnDevSysSnmpTrapManagerIndex Integer32,
|
|
tnDevSysSnmpTrapManagerAddrTDomain TDomain,
|
|
tnDevSysSnmpTrapManagerAddrTAddress TAddress,
|
|
tnDevSysSnmpTrapManagerEngineID SnmpEngineID,
|
|
tnDevSysSnmpTrapManagerStatus RowStatus
|
|
}
|
|
|
|
tnDevSysSnmpTrapManagerIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Index of this table."
|
|
::= { tnDevSysSnmpTrapManagerEntry 1 }
|
|
|
|
tnDevSysSnmpTrapManagerAddrTDomain OBJECT-TYPE
|
|
SYNTAX TDomain
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The transport address type of the SNMP trap manager. The default
|
|
value of this variable is snmpUDPDomain."
|
|
::= { tnDevSysSnmpTrapManagerEntry 2 }
|
|
|
|
tnDevSysSnmpTrapManagerAddrTAddress OBJECT-TYPE
|
|
SYNTAX TAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The transport address of the SNMP trap manager. For snmpUDPDomain,
|
|
a TAddress is 6 octets long, the initial 4 octets containing the
|
|
IP-address in network-byte order and the last 2 containing the UDP
|
|
port in network-byte order."
|
|
::= { tnDevSysSnmpTrapManagerEntry 3 }
|
|
|
|
tnDevSysSnmpTrapManagerEngineID OBJECT-TYPE
|
|
SYNTAX SnmpEngineID
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The engine ID of the SNMPv3 trap manager. "
|
|
::= { tnDevSysSnmpTrapManagerEntry 4 }
|
|
|
|
tnDevSysSnmpTrapManagerStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "This variable is used to dynamically create or delete an entry for this table."
|
|
::= { tnDevSysSnmpTrapManagerEntry 20 }
|
|
|
|
tnDevSysSnmpTrapCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnDevSysSnmpTrapCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table to maintain the SNMP trap configurations."
|
|
::= { tnDevSysSnmpmgmt 5 }
|
|
|
|
tnDevSysSnmpTrapCfgEntry OBJECT-TYPE
|
|
SYNTAX TnDevSysSnmpTrapCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in this table, containing the SNMP trap configurations."
|
|
INDEX { entPhysicalIndex }
|
|
::= { tnDevSysSnmpTrapCfgTable 1 }
|
|
|
|
TnDevSysSnmpTrapCfgEntry ::= SEQUENCE
|
|
{
|
|
tnDevSysSnmpTrapCfgMode INTEGER,
|
|
tnDevSysSnmpTrapCfgCommunity SnmpAdminString,
|
|
tnDevSysSnmpTrapCfgAuthFailure INTEGER,
|
|
tnDevSysSnmpTrapCfgLinkChange INTEGER,
|
|
tnDevSysSnmpTrapCfgEngineIdProbe INTEGER,
|
|
tnDevSysSnmpTrapCfgAdminEngineId SnmpEngineID,
|
|
tnDevSysSnmpTrapCfgSecurityName SnmpAdminString,
|
|
tnDevSysSnmpTrapCfgVersion INTEGER,
|
|
tnDevSysSnmpTrapCfgInformMode INTEGER,
|
|
tnDevSysSnmpTrapCfgInformTimeout INTEGER,
|
|
tnDevSysSnmpTrapCfgInformRetry INTEGER
|
|
}
|
|
|
|
tnDevSysSnmpTrapCfgMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The SNMP trap mode operation. Possible modes are:
|
|
enabled - Enable SNMP trap mode operation.
|
|
disabled - Disable SNMP trap mode operation."
|
|
::= { tnDevSysSnmpTrapCfgEntry 1 }
|
|
|
|
tnDevSysSnmpTrapCfgCommunity OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " the community access string when sending SNMP trap packet."
|
|
::= { tnDevSysSnmpTrapCfgEntry 2 }
|
|
|
|
tnDevSysSnmpTrapCfgAuthFailure OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates that the SNMP entity is permitted to generate authentication failure traps. Possible modes are:
|
|
enabled - Enable SNMP trap authentication failure.
|
|
disabled - Disable SNMP trap authentication failure."
|
|
::= { tnDevSysSnmpTrapCfgEntry 3 }
|
|
|
|
tnDevSysSnmpTrapCfgLinkChange OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the SNMP trap link-up and link-down mode operation. Possible modes are:
|
|
enabled - Enable SNMP trap link-up and link-down mode operation.
|
|
disabled - Disable SNMP trap link-up and link-down mode operation."
|
|
::= { tnDevSysSnmpTrapCfgEntry 4 }
|
|
|
|
tnDevSysSnmpTrapCfgEngineIdProbe OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the SNMP trap probe security engine ID mode of operation. Possible values are:
|
|
enabled - Enable SNMP trap probe security engine ID mode of operation.
|
|
disabled - Disable SNMP trap probe security engine ID mode of operation."
|
|
::= { tnDevSysSnmpTrapCfgEntry 5 }
|
|
|
|
tnDevSysSnmpTrapCfgAdminEngineId OBJECT-TYPE
|
|
SYNTAX SnmpEngineID
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the SNMP trap security engine ID. SNMPv3 sends traps and informs using USM for authentication and privacy. A unique engine ID for these traps and informs is needed. When tnDevSysSnmpTrapCfgEngineIdProbe is enabled, the ID will be probed automatically. Otherwise, the ID specified in this field is used."
|
|
::= { tnDevSysSnmpTrapCfgEntry 6 }
|
|
|
|
tnDevSysSnmpTrapCfgSecurityName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the SNMP trap security name. SNMPv3 traps and informs using USM for authentication and privacy. A unique security name is needed when traps and informs are enabled."
|
|
::= { tnDevSysSnmpTrapCfgEntry 7 }
|
|
|
|
tnDevSysSnmpTrapCfgVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
v1(1),
|
|
v2c(2),
|
|
v3(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The current active SNMP Trap version. Possible versions are:
|
|
v1: SNMP supported version 1.
|
|
v2c: SNMP supported version 2c.
|
|
v3: SNMP supported version 3."
|
|
::= { tnDevSysSnmpTrapCfgEntry 8 }
|
|
|
|
tnDevSysSnmpTrapCfgInformMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the SNMP trap inform mode operation. Possible modes are:
|
|
Enabled: Enable SNMP trap inform mode operation.
|
|
Disabled: Disable SNMP trap inform mode operation."
|
|
::= { tnDevSysSnmpTrapCfgEntry 9 }
|
|
|
|
tnDevSysSnmpTrapCfgInformTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the SNMP trap inform timeout. The allowed range is 0 to 2147 seconds."
|
|
::= { tnDevSysSnmpTrapCfgEntry 10 }
|
|
|
|
tnDevSysSnmpTrapCfgInformRetry OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the SNMP trap inform number of retry times. The allowed range is 0 to 255."
|
|
::= { tnDevSysSnmpTrapCfgEntry 11 }
|
|
|
|
-- ------------------------------------------------------
|
|
-- ------------------------------------------------------
|
|
-- ------------------------------------------------------
|
|
-- ------------------------------------------------------
|
|
|
|
|
|
|
|
tnDevSysSnmpTrapServerCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TnDevSysSnmpTrapServerCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table to maintain the SNMP trap configurations."
|
|
::= { tnDevSysSnmpmgmt 6 }
|
|
|
|
tnDevSysSnmpTrapServerCfgEntry OBJECT-TYPE
|
|
SYNTAX TnDevSysSnmpTrapServerCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in this table, containing the SNMP trap configurations."
|
|
INDEX { IMPLIED tnDevSysSnmpTrapServerCfgName }
|
|
::= { tnDevSysSnmpTrapServerCfgTable 1 }
|
|
|
|
TnDevSysSnmpTrapServerCfgEntry ::= SEQUENCE
|
|
{
|
|
tnDevSysSnmpTrapServerCfgName SnmpAdminString,
|
|
tnDevSysSnmpTrapServerCfgMode INTEGER,
|
|
tnDevSysSnmpTrapServerCfgVersion INTEGER,
|
|
tnDevSysSnmpTrapServerCfgCommunity SnmpAdminString,
|
|
tnDevSysSnmpTrapServerCfgDstAddress InetAddress,
|
|
tnDevSysSnmpTrapServerCfgDstPort INTEGER,
|
|
tnDevSysSnmpTrapServerCfgInformMode INTEGER,
|
|
tnDevSysSnmpTrapServerCfgInformTimeout INTEGER,
|
|
tnDevSysSnmpTrapServerCfgInformRetry INTEGER,
|
|
tnDevSysSnmpTrapServerCfgEngineIdProbe INTEGER,
|
|
tnDevSysSnmpTrapServerCfgAdminEngineId SnmpEngineID,
|
|
tnDevSysSnmpTrapServerCfgSecurityName SnmpAdminString,
|
|
tnDevSysSnmpTrapServerCfgEvtWstart INTEGER,
|
|
tnDevSysSnmpTrapServerCfgEvtCstart INTEGER,
|
|
tnDevSysSnmpTrapServerCfgEvtLinkUp PortList,
|
|
tnDevSysSnmpTrapServerCfgEvtLinkDown PortList,
|
|
tnDevSysSnmpTrapServerCfgEvtLldp PortList,
|
|
tnDevSysSnmpTrapServerCfgEvtAuthFail INTEGER,
|
|
tnDevSysSnmpTrapServerCfgEvtStp INTEGER,
|
|
tnDevSysSnmpTrapServerCfgEvtRmon INTEGER,
|
|
tnDevSysSnmpTrapServerCfgRowStatus RowStatus
|
|
}
|
|
|
|
tnDevSysSnmpTrapServerCfgName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " the trap configuration name."
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 1 }
|
|
|
|
tnDevSysSnmpTrapServerCfgMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The SNMP trap mode operation. Possible modes are:
|
|
enabled - Enable SNMP trap mode operation.
|
|
disabled - Disable SNMP trap mode operation."
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 2 }
|
|
|
|
tnDevSysSnmpTrapServerCfgVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
v1(1),
|
|
v2c(2),
|
|
v3(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The current active SNMP Trap version. Possible versions are:
|
|
v1: SNMP supported version 1.
|
|
v2c: SNMP supported version 2c.
|
|
v3: SNMP supported version 3."
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 3 }
|
|
|
|
tnDevSysSnmpTrapServerCfgCommunity OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " the community access string when sending SNMP trap packet."
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 4 }
|
|
|
|
tnDevSysSnmpTrapServerCfgDstAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates destination ip address."
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 5 }
|
|
|
|
tnDevSysSnmpTrapServerCfgDstPort OBJECT-TYPE
|
|
SYNTAX INTEGER(1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The allowed range for the port number is from 1 through 65535."
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 6 }
|
|
|
|
tnDevSysSnmpTrapServerCfgInformMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the SNMP trap inform mode operation. Possible modes are:
|
|
Enabled: Enable SNMP trap inform mode operation.
|
|
Disabled: Disable SNMP trap inform mode operation."
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 7 }
|
|
|
|
tnDevSysSnmpTrapServerCfgInformTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the SNMP trap inform timeout. The allowed range is 0 to 2147 seconds."
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 8 }
|
|
|
|
tnDevSysSnmpTrapServerCfgInformRetry OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the SNMP trap inform number of retry times. The allowed range is 0 to 255."
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 9 }
|
|
|
|
tnDevSysSnmpTrapServerCfgEngineIdProbe OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the SNMP trap probe security engine ID mode of operation. Possible values are:
|
|
enabled - Enable SNMP trap probe security engine ID mode of operation.
|
|
disabled - Disable SNMP trap probe security engine ID mode of operation."
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 10 }
|
|
|
|
tnDevSysSnmpTrapServerCfgAdminEngineId OBJECT-TYPE
|
|
SYNTAX SnmpEngineID
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the SNMP trap security engine ID. SNMPv3 sends traps and informs using USM for authentication and privacy. A unique engine ID for these traps and informs is needed. When tnDevSysSnmpTrapCfgEngineIdProbe is enabled, the ID will be probed automatically. Otherwise, the ID specified in this field is used."
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 11 }
|
|
|
|
tnDevSysSnmpTrapServerCfgSecurityName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates the SNMP trap security name. SNMPv3 traps and informs using USM for authentication and privacy. A unique security name is needed when traps and informs are enabled."
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 12 }
|
|
|
|
tnDevSysSnmpTrapServerCfgEvtWstart OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " "
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 13 }
|
|
|
|
tnDevSysSnmpTrapServerCfgEvtCstart OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " "
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 14 }
|
|
|
|
tnDevSysSnmpTrapServerCfgEvtLinkUp OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " "
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 15 }
|
|
|
|
tnDevSysSnmpTrapServerCfgEvtLinkDown OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " "
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 16 }
|
|
|
|
tnDevSysSnmpTrapServerCfgEvtLldp OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " "
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 17 }
|
|
|
|
tnDevSysSnmpTrapServerCfgEvtAuthFail OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Indicates that the SNMP entity is permitted to generate authentication failure traps. Possible modes are:
|
|
enabled - Enable SNMP trap authentication failure.
|
|
disabled - Disable SNMP trap authentication failure."
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 18 }
|
|
|
|
tnDevSysSnmpTrapServerCfgEvtStp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " "
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 19 }
|
|
|
|
tnDevSysSnmpTrapServerCfgEvtRmon OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " "
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 20 }
|
|
|
|
tnDevSysSnmpTrapServerCfgRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the status of the entry, and is used to create
|
|
and delete entries in this table."
|
|
::= { tnDevSysSnmpTrapServerCfgEntry 21 }
|
|
|
|
|
|
tnDevSysSnmpTrapGlobalCfgMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The global SNMP trap mode operation. Possible modes are:
|
|
enabled - Enable SNMP trap mode operation.
|
|
disabled - Disable SNMP trap mode operation."
|
|
::= { tnDevSysSnmpmgmt 7 }
|
|
|
|
END
|