mibs/MIBS/4rf/4RF-APRISAXE-EVENTS
2023-12-05 12:25:34 +01:00

771 lines
26 KiB
Plaintext

APRISAXE-EVENTS-4RF DEFINITIONS ::= BEGIN
--
-- File: $Id: 4RF-APRISAXE-EVENTS.txt,v 1.40 2007/07/20 02:50:01 ma Exp $
--
-- Copyright: 2004 4RF COMMUNICATIONS LTD
--
-- Description:
-- Event MIB for AprisaXE project, the values in this file are not accessible
-- except as notifications.
--
-- Versions:
--
-- Release 3
-- Added support for 4-wire cards and configurable cross-connections
--
-- Notes:
-- None
--
IMPORTS
-- Standard imports
MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, NOTIFICATION-TYPE,
Integer32, Unsigned32, Counter32, IpAddress
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
-- 4RF Specific imports
fourRFAprisaXE
FROM PRODUCTS-MIB-4RF
FourRFAlarmStatus, FourRFAlarmSeverity, FourRFAlarmEnabled, FourRFAlarmPresent,
FourRFImageVersion, FourRFHardwareVersion
FROM COMMON-TC-4RF
AprisaXEAlarmType, AprisaXECardType, AprisaXESlotNumber,
AprisaXEDataStatus, AprisaXEPortNumber
FROM APRISAXE-TC-4RF
aprisaXEObjects, aprisaXEEvents
FROM APRISAXE-MIB-4RF
fourRFModules
FROM MIB-4RF;
-- Module Identification
aprisaXE4RFEventModule MODULE-IDENTITY
LAST-UPDATED "200704300000Z"
ORGANIZATION "www.4rf.com"
CONTACT-INFO
"postal: 4RF Communications Ltd
26 Glover Street
Ngauranga
PO Box 13-506
Wellington 6032
New Zealand
phone: +64 4 499 6000
email: support@4rf.com"
DESCRIPTION "Event MIB for the AprisaXE project"
-- Revision history
-- (in reverse chronological order)
REVISION "200704300000Z"
DESCRIPTION "Second draft"
REVISION "200411300334Z"
DESCRIPTION "First draft"
::= { fourRFModules 7 }
-- Trap Values
aprisaXEEventValues OBJECT IDENTIFIER ::= { aprisaXEObjects 1000 }
-- Alarm event values
aprisaXEEventAlarmStatus OBJECT-TYPE
SYNTAX FourRFAlarmPresent
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The status of an alarm event."
::= { aprisaXEEventValues 1 }
aprisaXEEventAlarmSeverity OBJECT-TYPE
SYNTAX FourRFAlarmSeverity
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The severity of the alarm."
::= { aprisaXEEventValues 2 }
aprisaXEEventAlarmValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "Indicatesthe current value."
::= { aprisaXEEventValues 3 }
aprisaXEEventAlarmThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "Indicates the level at which the alarm was set."
::= { aprisaXEEventValues 4 }
aprisaXEEventAlarmType OBJECT-TYPE
SYNTAX AprisaXEAlarmType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The alarm type."
::= { aprisaXEEventValues 5 }
-- Card mismatch event values
aprisaXEEventCardExpected OBJECT-TYPE
SYNTAX AprisaXECardType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The type of MUX card expected in a slot."
::= { aprisaXEEventValues 6 }
aprisaXEEventCardInstalled OBJECT-TYPE
SYNTAX AprisaXECardType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The type of MUX card found in a slot."
::= { aprisaXEEventValues 7 }
aprisaXEEventCardSlot OBJECT-TYPE
SYNTAX AprisaXESlotNumber
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The slot containing the unexpected card."
::= { aprisaXEEventValues 8 }
aprisaXEEventCardStatus OBJECT-TYPE
SYNTAX FourRFAlarmPresent
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "Indicates whether the alarm is present or has been cleared."
::= { aprisaXEEventValues 9 }
aprisaXEEventCardPort OBJECT-TYPE
SYNTAX AprisaXEPortNumber
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The port reporting the event."
::= { aprisaXEEventValues 10 }
-- Characterisation Data Status
aprisaXEEventCharacterisationStatus OBJECT-TYPE
SYNTAX AprisaXEDataStatus
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "Indicates whether the characterisation is valid or invalid."
::= { aprisaXEEventValues 15 }
-- MIB Data Status
aprisaXEEventMibStatus OBJECT-TYPE
SYNTAX AprisaXEDataStatus
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "Indicates whether the MIB is valid or invalid."
::= { aprisaXEEventValues 16 }
-- ***************************************************************************
-- Traps
-- ***************************************************************************
aprisaXELinkAlarmsEvents OBJECT-IDENTITY
STATUS current
DESCRIPTION "The events for the link alarms."
::= { aprisaXEEvents 1 }
aprisaXELinkAlarmsEventsV2 OBJECT-IDENTITY
STATUS current
DESCRIPTION "The SNMPv2 events for the link alarms."
::= { aprisaXELinkAlarmsEvents 0 }
aprisaXEThresholdAlarmEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus,
aprisaXEEventAlarmSeverity,
aprisaXEEventAlarmValue,
aprisaXEEventAlarmThreshold,
aprisaXEEventAlarmType
}
STATUS current
DESCRIPTION "Event indicating a change in state of a threshold alarm.
It will be sent whenever the status of the alarm changes from
noAlarm to alarmPresent and vice versa."
::= { aprisaXELinkAlarmsEventsV2 1 }
-- ***************************************************************************
-- Receiver Traps
-- ***************************************************************************
aprisaXERxSynthOutOfLockAlarmEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the Rx synthesizer out of lock alarm.
It will be sent whenever the status of the alarm changes from
noAlarm to alarmPresent and vice versa."
::= { aprisaXELinkAlarmsEventsV2 10 }
aprisaXEAlarmRxCDataEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCharacterisationStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the receiver
characterisation data alarm."
::= { aprisaXELinkAlarmsEventsV2 11 }
aprisaXEAlarmRx12VStatusEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the Rx synthesizer out of lock alarm.
It will be sent whenever the status of the alarm changes from
noAlarm to alarmPresent and vice versa."
::= { aprisaXELinkAlarmsEventsV2 12 }
aprisaXEAlarmRxOffEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of receiver, when it is
turned on or off.
It will be sent whenever the status of the alarm changes from
noAlarm to alarmPresent and vice versa."
::= { aprisaXELinkAlarmsEventsV2 13 }
aprisaXEAlarmRxBadMibEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventMibStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the receiver
MIB data alarm."
::= { aprisaXELinkAlarmsEventsV2 14 }
-- ***************************************************************************
-- Transmitter Traps
-- ***************************************************************************
aprisaXEAlarmTxCDataEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCharacterisationStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the transmitter
characterisation data alarm."
::= { aprisaXELinkAlarmsEventsV2 20 }
aprisaXEAlarmTxSynthOutOfLockEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the transmitter
synthesiser out of lock alarm."
::= { aprisaXELinkAlarmsEventsV2 21 }
aprisaXEAlarmTx28VStatusEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the transmitter
28V supply status alarm."
::= { aprisaXELinkAlarmsEventsV2 22 }
aprisaXEAlarmTx11VStatusEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the transmitter
11V supply status alarm."
::= { aprisaXELinkAlarmsEventsV2 23 }
aprisaXEAlarmTx5VStatusEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the transmitter
5V digital supply status alarm."
::= { aprisaXELinkAlarmsEventsV2 24 }
aprisaXEAlarmTxAmplifierBalanceEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the transmitter
amplifier balance status alarm."
::= { aprisaXELinkAlarmsEventsV2 25 }
aprisaXEAlarmTxBadMibEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventMibStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the transmitter
MIB data alarm."
::= { aprisaXELinkAlarmsEventsV2 26 }
aprisaXEAlarmTxNeg5VStatusEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the transmitter
Negative 5V digital supply status alarm."
::= { aprisaXELinkAlarmsEventsV2 27 }
-- ***************************************************************************
-- Modem Traps
-- ***************************************************************************
aprisaXEModemSyncEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the modem lock."
::= { aprisaXELinkAlarmsEventsV2 30 }
aprisaXEModemTDMAlignmentEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the modem TDM alignment."
::= { aprisaXELinkAlarmsEventsV2 31 }
aprisaXEModemDemodAlignmentEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the modem demodulator alignment."
::= { aprisaXELinkAlarmsEventsV2 32 }
aprisaXEModemRefAStatusEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the Ref A clock."
::= { aprisaXELinkAlarmsEventsV2 33 }
aprisaXEModemRefBStatusEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the Ref B clock."
::= { aprisaXELinkAlarmsEventsV2 34 }
aprisaXEModemUCEPresentEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating the presence of uncorrectable errors."
::= { aprisaXELinkAlarmsEventsV2 35 }
-- ***************************************************************************
-- QuadE1 Traps
-- ***************************************************************************
aprisaXEQuadE1LOSEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a change in LOS state for a port."
::= { aprisaXELinkAlarmsEventsV2 40 }
aprisaXEQuadE1AISEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a change in AIS state for a port."
::= { aprisaXELinkAlarmsEventsV2 41 }
aprisaXEQuadE1RAIEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a change in RAI state for a port."
::= { aprisaXELinkAlarmsEventsV2 42 }
aprisaXEQuadE1RMAIEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a change in RMAI state for a port."
::= { aprisaXELinkAlarmsEventsV2 43 }
aprisaXEQuadE1TS16AISEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a change in TS16AIS state for a port."
::= { aprisaXELinkAlarmsEventsV2 44 }
aprisaXEQuadE1TS16LOSEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a change in TS16LOS state for a port."
::= { aprisaXELinkAlarmsEventsV2 45 }
aprisaXEQuadE1LOFEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a change in loss of frame state for a port."
::= { aprisaXELinkAlarmsEventsV2 46 }
-- ***************************************************************************
-- FXO Traps
-- ***************************************************************************
aprisaXEFXOCodecOvldEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a change in Codec Ovld state for a port."
::= { aprisaXELinkAlarmsEventsV2 50 }
aprisaXEFXOBillToneOvldEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a change in Billing Tone Ovld state for a port."
::= { aprisaXELinkAlarmsEventsV2 51 }
aprisaXEFXOCurrentOvldEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a change in Current Ovld state for a port."
::= { aprisaXELinkAlarmsEventsV2 52 }
aprisaXEFXOUnplugEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a change in Unplug state for a port."
::= { aprisaXELinkAlarmsEventsV2 53 }
-- ***************************************************************************
-- FXS Traps
-- ***************************************************************************
aprisaXEFXSCalibrateErrorEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a common mode error during Pro-SLIC initialisation."
::= { aprisaXELinkAlarmsEventsV2 60 }
aprisaXEFXSDCDCErrorEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS obsolete
DESCRIPTION "Event indicating a DC-DC converter error during Pro-SLIC initialisation "
::= { aprisaXELinkAlarmsEventsV2 61 }
aprisaXEFXSCASLockEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating the FPGA has not locked onto a CAS frame. "
::= { aprisaXELinkAlarmsEventsV2 62 }
-- ***************************************************************************
-- HSS Traps
-- ***************************************************************************
aprisaXEHSSTDMLockEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating an HSS TDM Lock error."
::= { aprisaXELinkAlarmsEventsV2 70 }
aprisaXEHSS32MHzResetEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a 32MHz clock reset error."
::= { aprisaXELinkAlarmsEventsV2 71 }
aprisaXEHSSTDMResetEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a TDM reset error."
::= { aprisaXELinkAlarmsEventsV2 72 }
aprisaXEHSSPatternLossEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a Pattern Loss error."
::= { aprisaXELinkAlarmsEventsV2 73 }
aprisaXEHSSRxFifoFullEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating an Rx FIFO Full error."
::= { aprisaXELinkAlarmsEventsV2 74 }
aprisaXEHSSRxFifoEmptyEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating an Rx FIFO Empty error."
::= { aprisaXELinkAlarmsEventsV2 75 }
aprisaXEHSSTxFifoFullEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a Tx FIFO Full error."
::= { aprisaXELinkAlarmsEventsV2 76 }
aprisaXEHSSTxFifoEmptyEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a Tx FIFO Empty error."
::= { aprisaXELinkAlarmsEventsV2 77 }
aprisaXEHSSRxClockValidEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating an Rx Clock Valid error."
::= { aprisaXELinkAlarmsEventsV2 78 }
aprisaXEHSSTxClockValidEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a Tx Clock Valid error."
::= { aprisaXELinkAlarmsEventsV2 79 }
-- ***************************************************************************
-- V24 Traps
-- ***************************************************************************
aprisaXEV24ControlLineLossEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating V24 control line aren't in sync."
::= { aprisaXELinkAlarmsEventsV2 80 }
-- ***************************************************************************
-- Other Traps
-- ***************************************************************************
aprisaXEUnexpectedCardEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardExpected,
aprisaXEEventCardInstalled,
aprisaXEEventCardStatus
}
STATUS current
DESCRIPTION "Event indicating an mismatch between the MIB and the installed
MUX cards. The radio will not operate correctly if the MIB and
MUX cards do not match."
::= { aprisaXELinkAlarmsEventsV2 100 }
aprisaXECLKSyncEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the clock sync state."
::= { aprisaXELinkAlarmsEventsV2 110 }
aprisaXENetClkConfigEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the network clock config."
::= { aprisaXELinkAlarmsEventsV2 111 }
aprisaXECharacterisationEEFailEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardInstalled,
aprisaXEEventCharacterisationStatus
}
STATUS current
DESCRIPTION "Event indicating a failed read of characterisation data from
EEPROM."
::= { aprisaXELinkAlarmsEventsV2 120 }
aprisaXEMibEEFailEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardInstalled,
aprisaXEEventMibStatus
}
STATUS current
DESCRIPTION "Event indicating a failed read of mib data from EEPROM."
::= { aprisaXELinkAlarmsEventsV2 121 }
aprisaXEMhsbSwitchToStandbyEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a Monitored Hot Standby switch to Standby Event."
::= { aprisaXELinkAlarmsEventsV2 130 }
aprisaXEAlternateImageTableEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating an Alternate Image Table Event."
::= { aprisaXELinkAlarmsEventsV2 131 }
aprisaXEDefaultImageTableEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a Default Image Table Event."
::= { aprisaXELinkAlarmsEventsV2 132 }
aprisaXEUploadFailEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating the failure of the previous upload."
::= { aprisaXELinkAlarmsEventsV2 133 }
-- ***************************************************************************
-- Psc Traps
-- ***************************************************************************
aprisaXEPscDemuxAlignmentEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the PSC Demux alignment ."
::= { aprisaXELinkAlarmsEventsV2 140 }
aprisaXEPscTDMAlignmentEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a change in state of the PSC TDM alignment."
::= { aprisaXELinkAlarmsEventsV2 141 }
aprisaXEPscMuxAlignmentErrorEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating if the TDM mux loses alignment to the TDM bus."
::= { aprisaXELinkAlarmsEventsV2 142 }
aprisaXEPscCompanionTxFailEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating that the HRSD Companion transmitter has failed."
::= { aprisaXELinkAlarmsEventsV2 143 }
aprisaXEPscSoftwareOverrideEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating a software override of the PSC Mode Switch."
::= { aprisaXELinkAlarmsEventsV2 144 }
aprisaXEPscInvalidSwitchValueEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating that the PSC Mode Switch value is invalid."
::= { aprisaXELinkAlarmsEventsV2 145 }
-- ***************************************************************************
-- DualE1 Traps
-- ***************************************************************************
aprisaXEDualE1LOSEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a change in LOS state for a port."
::= { aprisaXELinkAlarmsEventsV2 150 }
aprisaXEDualE1AISEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a change in AIS state for a port."
::= { aprisaXELinkAlarmsEventsV2 151 }
-- ***************************************************************************
-- SingleE1 Traps
-- ***************************************************************************
aprisaXESingleE1LOSEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a change in LOS state for a port."
::= { aprisaXELinkAlarmsEventsV2 160 }
aprisaXESingleE1AISEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventCardSlot,
aprisaXEEventCardPort,
aprisaXEEventAlarmStatus
}
STATUS current
DESCRIPTION "Event indicating a change in AIS state for a port."
::= { aprisaXELinkAlarmsEventsV2 161 }
-- ***************************************************************************
-- HRSD Traps
-- ***************************************************************************
aprisaXEHrsdCompareOidEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating that an OID failed its comparison check."
::= { aprisaXELinkAlarmsEventsV2 170 }
aprisaXEHrsdCompanionLostEvent NOTIFICATION-TYPE
OBJECTS { aprisaXEEventAlarmStatus }
STATUS current
DESCRIPTION "Event indicating that the HRSD Companion Heartbeat is lost."
::= { aprisaXELinkAlarmsEventsV2 171 }
-- ***************************************************************************
-- End Traps
-- ***************************************************************************
END