mibs/MIBS/ATM-FORUM-SNMP-M4-MIB
2023-12-05 12:25:34 +01:00

4735 lines
159 KiB
Plaintext

ATM-FORUM-SNMP-M4-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE, OBJECT-IDENTITY,
Integer32, IpAddress, Gauge32,
Unsigned32, enterprises FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString,
AutonomousType, RowStatus,
TestAndIncr, RowPointer,
TruthValue, TimeStamp,
DateAndTime, TimeInterval FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
ifIndex, ifOperStatus, OwnerString FROM IF-MIB
atmVplEntry, atmVplVpi,
atmVplOperStatus,
atmVclEntry, atmVclVpi, atmVclVci,
atmVclOperStatus,
atmVpCrossConnectEntry,
atmVpCrossConnectL2HOperStatus,
atmVpCrossConnectH2LOperStatus,
atmVcCrossConnectEntry,
atmVcCrossConnectL2HOperStatus,
atmVcCrossConnectH2LOperStatus FROM ATM-MIB
entPhysicalIndex, entPhysicalClass,
entPhysicalContainedIn,
entPhysicalParentRelPos
FROM ENTITY-MIB
hrSWInstalledIndex,
hrSWInstalledName FROM HOST-RESOURCES-MIB;
atmfM4MIB MODULE-IDENTITY
LAST-UPDATED "9805140000Z"
ORGANIZATION "The ATM Forum"
CONTACT-INFO
"The ATM Forum
2570 West El Camino Real, Suite 304
Mountain View, CA 94040-1313 USA
Phone: +1 415-949-6700
Fax: +1 415-949-6705
info@atmforum.com"
DESCRIPTION
"This MIB module is the SNMP version of the ATM Forum's
M4 interface (network element view)."
REVISION "9805140000Z"
DESCRIPTION
"Initial version of MIB module ATM-FORUM-SNMP-M4-MIB."
::= { atmfM4SnmpNEView 1 }
atmForum OBJECT IDENTIFIER ::= { enterprises 353 }
atmForumNetworkManagement OBJECT IDENTIFIER ::= { atmForum 5 }
atmfM4 OBJECT IDENTIFIER ::= { atmForumNetworkManagement 1 }
atmfM4SnmpNEView OBJECT IDENTIFIER ::= { atmfM4 3 }
atmfM4MIBObjects OBJECT IDENTIFIER ::= { atmfM4MIB 1 }
atmfM4MIBTraps OBJECT IDENTIFIER ::= { atmfM4MIB 2 }
atmfM4MIBTrapPrefix OBJECT IDENTIFIER ::= { atmfM4MIBTraps 0 }
atmfM4MIBConformance OBJECT IDENTIFIER ::= { atmfM4MIB 3 }
-- This MIB module consists of the following groups:
-- (1) ATM NE High-Level Objects
-- (2) Interfaces: Physical Path Termination Point Table
-- (3) TC Adapter Table
-- (4) ATM Cell Layer Interface Table
-- (5) VPL Termination Point Table Extensions
-- (6) VCL Termination Point Table Extensions
-- (7) VP Cross-Connect Table Extensions
-- (8) VC Cross-Connect Table Extensions
-- (9) VP 'next VPI' Table
-- (10) VC 'next VCI' Table
-- (11) ATM Cell Protocol Monitoring Current Data Table
-- (12) ATM Cell Protocol Monitoring History Data Table
-- (13) ATM Cell Protocol Monitoring Error Log Table
-- (14) TC Adapter Protocol Monitoring Current Data Table
-- (15) TC Adapter Protocol Monitoring History Data Table
-- (16) VPL UPC/NPC Disagreement Monitoring Current Data Table
-- (17) VPL UPC/NPC Disagreement Monitoring History Data Table
-- (18) VCL UPC/NPC Disagreement Monitoring Current Data Table
-- (19) VCL UPC/NPC Disagreement Monitoring History Data Table
-- (20) OAM Loopback Test Definitions
-- (21) VPL/VPC Termination Point Test Table
-- (22) VCL/VCC Termination Point Test Table
-- (23) Equipment Table extension
-- (24) Equipment Holder Table extension
-- (25) Plug-In Unit Table extension
-- (26) Hardware Unit/Running Software Relationship Table
-- (27) Hardware Unit/Installed Software Relationship Table
-- (28) Alarm Forwarding Discriminator Table
-- (29) Trap Log Table
-- (30) Trap Log Entry Table
-- (31) Alarm Trap Log Entry Table extension
-- (32) Notifications (traps)
-- (33) Conformance statements
-- ATM Forum M4 ATM network element (NE) high-level objects
atmfM4NeVendor OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor of the ATM network element."
::= { atmfM4MIBObjects 1 }
atmfM4NeVersion OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the ATM network element."
::= { atmfM4MIBObjects 2 }
atmfM4NeStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time at which the agent was last started; in other
words, the time at which sysUpTime was zero."
::= { atmfM4MIBObjects 3 }
atmfM4NeAlarmSeverityIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An index into the alarm severity profile table, specifying
the severity assignments for M4 alarms reported for the
ATM network element. The default value for this object is
zero."
::= { atmfM4MIBObjects 4 }
atmfM4NeSuppressZeroStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the value of this object is true, no entry will be
created in any of the historical statistics tables for
intervals in which all counts are zero. The default value for
this object is true(1)."
::= { atmfM4MIBObjects 5 }
-- ATM Forum M4 Interface Configuration Table Extensions
-- Physical Path Termination Point Layer
atmfM4PhysPathTpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4PhysPathTpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 interface Configuration table extensions
for the physical path termination point."
::= { atmfM4MIBObjects 6 }
atmfM4PhysPathTpEntry OBJECT-TYPE
SYNTAX AtmfM4PhysPathTpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Columns conceptually added to the interface table
entry for an ATM interface to model the physical path
termination point.
The row of the interface table modeling this object should
also include columns for the TC Adapter object and the ATM
interface table defined in RFC 1695.
The interface table entry for the physical path TP
fields of an ATM interface are set up without management
system control (or else that setup is outside the
scope of M4)."
INDEX { ifIndex }
::= { atmfM4PhysPathTpTable 1 }
AtmfM4PhysPathTpEntry ::= SEQUENCE {
atmfM4PhysPathTpHwUnitIndex Integer32,
atmfM4PhysPathTpPortID Integer32,
atmfM4PhysPathTpAlarmSeverityIndex Integer32
}
atmfM4PhysPathTpHwUnitIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the index of the entry in the entPhysicalTable
that represents the device (i.e., card) on which the
physical path terminates."
::= { atmfM4PhysPathTpEntry 1 }
atmfM4PhysPathTpPortID OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the port (within the card identified by the
hardware unit index) on which the physical path terminates."
::= { atmfM4PhysPathTpEntry 2 }
atmfM4PhysPathTpAlarmSeverityIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the index of the entry in the communications
alarm severity profile table that should be used. The default
value of this object is zero."
::= { atmfM4PhysPathTpEntry 3 }
-- ATM Forum M4 Interface Configuration Table Extensions
-- TC Adapter Layer
atmfM4TcAdapterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4TcAdapterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 interface Configuration table extensions
for the TC Adapter."
::= { atmfM4MIBObjects 7 }
atmfM4TcAdapterEntry OBJECT-TYPE
SYNTAX AtmfM4TcAdapterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Columns conceptually added to the interface table
entry for an ATM interface to model the TC Adapter.
The row of the interface table modeling this object should
also include columns for the physical path TP and the ATM
interface table defined in RFC 1695.
The interface table entry for the TC Adapter
fields of an ATM interface are set up without management
system control (or else that setup is outside the
scope of M4)."
INDEX { ifIndex }
::= { atmfM4TcAdapterTable 1 }
AtmfM4TcAdapterEntry ::= SEQUENCE {
atmfM4TcACellScrambling TruthValue,
atmfM4TcAlarmSeverityIndex Integer32
}
atmfM4TcACellScrambling OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute is used by the management system to
activate and deactivate the ATM cell scrambling function.
When the value of this attribute is TRUE, cell scrambling
on the interface is activated.
This attribute shall be present only for interfaces that
support the deactivation of cell scrambling. The ATM Forum
UNI specification requires cell scrambling for ATM/SONET
interfaces but allows cell scrambling to be controlled
(i.e., turned on and off) for ATM/DS3 interfaces.
The default value of this object is true(1)."
::= { atmfM4TcAdapterEntry 1 }
atmfM4TcAlarmSeverityIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the index of the entry in the communications
alarm severity profile table that should be used. The
default value of this object is zero."
::= { atmfM4TcAdapterEntry 2 }
-- ATM Forum M4 Interface Configuration Table Extensions
-- ATM Cell Layer
atmfM4AtmLayerTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4AtmLayerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 interface Configuration table extensions
for the ATM cell layer."
::= { atmfM4MIBObjects 8 }
atmfM4AtmLayerEntry OBJECT-TYPE
SYNTAX AtmfM4AtmLayerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Columns conceptually added to the interface table
entry for an ATM interface to model the ATM cell layer.
The row of the interface table modeling this object should
also include columns for the physical path TP and TC Adapter
object, as well as the ATM interface table defined in
RFC 1695.
The default configuration of an entry in this table is
used whenever the entries for the physical path TP, etc.,
are created. The management system configures a UNI,
B-ICI, or B-ISSI on the interface by first modifying the
atmfM4IfType column (this can be done in the same SNMP
set-request that sets up the other necessary variables."
INDEX { ifIndex }
::= { atmfM4AtmLayerTable 1 }
AtmfM4AtmLayerEntry ::= SEQUENCE {
atmfM4IfType INTEGER,
atmfM4IfLoopbackLocationCode Integer32,
atmfM4IfSubscriberAddress DisplayString,
atmfM4IfPreferredCarrier DisplayString,
atmfM4IfFarEndCarrierNetwork DisplayString
}
atmfM4IfType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
uni(1),
bici(2),
bissi(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the type of ATM cell layer interface defined
on the physical path termination point modeled by this
entry in the interface table. The default value of this
object is none(0)."
::= { atmfM4AtmLayerEntry 1 }
atmfM4IfLoopbackLocationCode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the code that shall exist in incoming OAM
Loopback cells that are to be looped back at this
interface.
A value of zero shall indicate that the management system
has not set any loopback location code for this interface.
Therefore, zero should not be used as the actual loopback
location code for any interface.
This object shall be present only for table entries that
represent an actual ATM cell layer interface (i.e., the
atmfM4IfType is not none(0)).
The default value of this object is zero."
::= { atmfM4AtmLayerEntry 2 }
atmfM4IfSubscriberAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the address or newline-delimited list of
addresses assigned to the UNI.
This object shall be present only for table entries that
represent a UNI interface.
The default value of this object is the null string."
::= { atmfM4AtmLayerEntry 3 }
atmfM4IfPreferredCarrier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the name of the default carrier to use when one
is not explicitly identified in the call set-up message.
This object shall be present only for table entries that
represent a UNI interface and only when SVC services are
supported.
The default value of this object is the null string."
::= { atmfM4AtmLayerEntry 4 }
atmfM4IfFarEndCarrierNetwork OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the adjacent carrier to which the B-ICI
transmission path is connected.
This object shall be present only for table entries that
represent a B-ICI interface and only when SVC services are
supported.
The default value of this object is the null string."
::= { atmfM4AtmLayerEntry 5 }
-- ATM Forum M4 VPL Termination Point Configuration Table Extensions
atmfM4VplTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4VplEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 VPL Termination Point Configuration
table extensions. This table augments the VPL
configuration table in RFC 1695."
::= { atmfM4MIBObjects 9 }
atmfM4VplEntry OBJECT-TYPE
SYNTAX AtmfM4VplEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional columns for the VPL configuration table entry."
AUGMENTS { atmVplEntry }
::= { atmfM4VplTable 1 }
AtmfM4VplEntry ::= SEQUENCE {
atmfM4VplSegEndPt TruthValue
}
atmfM4VplSegEndPt OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies whether the VPL termination point is a segment
end-point."
DEFVAL { false }
::= { atmfM4VplEntry 1 }
-- ATM Forum M4 VCL Termination Point Configuration Table Extensions
atmfM4VclTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4VclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 VCL Termination Point Configuration
table extensions. This table augments the VCL
configuration table in RFC 1695."
::= { atmfM4MIBObjects 10 }
atmfM4VclEntry OBJECT-TYPE
SYNTAX AtmfM4VclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional columns for the VCL configuration table entry."
AUGMENTS { atmVclEntry }
::= { atmfM4VclTable 1 }
AtmfM4VclEntry ::= SEQUENCE {
atmfM4VclSegEndPt TruthValue
}
atmfM4VclSegEndPt OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies whether the VCL termination point is a segment
end-point."
DEFVAL { false }
::= { atmfM4VclEntry 1 }
-- ATM Forum M4 VP Cross-Connect Table Extensions
atmfM4VpXConnTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4VpXConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 VP Cross-Connect Configuration
table extensions. This table augments the VP Cross-Connect
configuration table in RFC 1695."
::= { atmfM4MIBObjects 11 }
atmfM4VpXConnEntry OBJECT-TYPE
SYNTAX AtmfM4VpXConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional columns for the VP Cross-Connect table entry."
AUGMENTS { atmVpCrossConnectEntry }
::= { atmfM4VpXConnTable 1 }
AtmfM4VpXConnEntry ::= SEQUENCE {
atmfM4VpXConnRecover TruthValue
}
atmfM4VpXConnRecover OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If FALSE, this cross-connection will be removed on
failure."
DEFVAL { true }
::= { atmfM4VpXConnEntry 1 }
-- ATM Forum M4 VC Cross-Connect Table Extensions
atmfM4VcXConnTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4VcXConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 VC Cross-Connect Configuration
table extensions. This table augments the VC Cross-Connect
configuration table in RFC 1695."
::= { atmfM4MIBObjects 12 }
atmfM4VcXConnEntry OBJECT-TYPE
SYNTAX AtmfM4VcXConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional columns for the VC Cross-Connect table entry."
AUGMENTS { atmVcCrossConnectEntry }
::= { atmfM4VcXConnTable 1 }
AtmfM4VcXConnEntry ::= SEQUENCE {
atmfM4VcXConnRecover TruthValue
}
atmfM4VcXConnRecover OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If FALSE, this cross-connection will be removed on
failure."
DEFVAL { true }
::= { atmfM4VcXConnEntry 1 }
-- ATM Forum M4 VP "Next VPI" Table
atmfM4VpNextVpiTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4VpNextVpiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 VP Next VPI value table. This optional
table supplies unused VPI values for use in creating
entries in the atmVplTable."
::= { atmfM4MIBObjects 13 }
atmfM4VpNextVpiEntry OBJECT-TYPE
SYNTAX AtmfM4VpNextVpiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents the 'next' VPI
value available for a given ATM interface.
Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it."
INDEX { ifIndex }
::= { atmfM4VpNextVpiTable 1 }
AtmfM4VpNextVpiEntry ::= SEQUENCE {
atmfM4VpNextVpiValue INTEGER
}
atmfM4VpNextVpiValue OBJECT-TYPE
SYNTAX INTEGER (-1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used for
atmVplVpi when creating entries in the atmVplTable. The
value -1 indicates that no unassigned entries are available.
To obtain the atmVplVpi value for a new entry, the manager
issues a management protocol retrieval operation to obtain
the current value of this object. After each retrieval, the
agent should modify the value to the next unassigned index
(or -1)."
::= { atmfM4VpNextVpiEntry 1 }
-- ATM Forum M4 VC "Next VCI" Table
atmfM4VcNextVciTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4VcNextVciEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 VC Next VCI value table. This optional
table supplies unused VCI values for use in creating
entries in the atmVclTable."
::= { atmfM4MIBObjects 14 }
atmfM4VcNextVciEntry OBJECT-TYPE
SYNTAX AtmfM4VcNextVciEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents the 'next' VCI
value available for a given ATM interface.
Each VPL Termination Point automatically has
an entry in this table associated with it."
INDEX { ifIndex,
atmVplVpi }
::= { atmfM4VcNextVciTable 1 }
AtmfM4VcNextVciEntry ::= SEQUENCE {
atmfM4VcNextVciValue INTEGER
}
atmfM4VcNextVciValue OBJECT-TYPE
SYNTAX INTEGER (-1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used for
atmVclVci when creating entries in the atmVclTable. The
value -1 indicates that no unassigned entries are available.
To obtain the atmVclVci value for a new entry, the manager
issues a management protocol retrieval operation to obtain
the current value of this object. After each retrieval, the
agent should modify the value to the next unassigned index
(or -1)."
::= { atmfM4VcNextVciEntry 1 }
-- ATM Cell Protocol Monitoring Current Data (per interface)
atmfM4CellProtoCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4CellProtoCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 Cell Protocol Monitoring Current Data
table.
This table maintains per-interface statistics for the
fifteen-minute interval currently being collected."
::= { atmfM4MIBObjects 15 }
atmfM4CellProtoCurrEntry OBJECT-TYPE
SYNTAX AtmfM4CellProtoCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ATM Forum M4 Cell Protocol Monitoring
Current Data table.
Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it."
INDEX { ifIndex }
::= { atmfM4CellProtoCurrTable 1 }
AtmfM4CellProtoCurrEntry ::= SEQUENCE {
atmfM4CellProtoCurrSuspect TruthValue,
atmfM4CellProtoCurrElapsedTime TimeInterval,
atmfM4CellProtoCurrSupprIntvls Gauge32,
atmfM4CellProtoCurrProtoErrors Gauge32,
atmfM4CellProtoCurrInOAMCells Gauge32
}
atmfM4CellProtoCurrSuspect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the statistics in this entry may be unreliable."
::= { atmfM4CellProtoCurrEntry 1 }
atmfM4CellProtoCurrElapsedTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted."
::= { atmfM4CellProtoCurrEntry 2 }
atmfM4CellProtoCurrSupprIntvls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is non-zero only if the ATM NE is
suppressing ATM Cell Protocol Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.
When non-zero, this attribute represents the number of
'all-zeroes' intervals that were suppressed immediately
prior to the current interval.
Note that the suppression of 'all-zeroes' intervals is
controlled by the atmfM4NeSuppressZeroStats object."
::= { atmfM4CellProtoCurrEntry 3 }
atmfM4CellProtoCurrProtoErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ATM cells dropped on this interface, due to
an unrecognized field or set of fields in the ATM cell
header, since the start of this interval."
::= { atmfM4CellProtoCurrEntry 4 }
atmfM4CellProtoCurrInOAMCells OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OAM cells received at this interface since
the start of this interval."
::= { atmfM4CellProtoCurrEntry 5 }
-- ATM Cell Protocol Monitoring History Data (per interface and time
-- interval)
atmfM4CellProtoHistTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4CellProtoHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 Cell Protocol Monitoring History Data
table.
This table maintains per-interface statistics for previous
fifteen-minute intervals."
::= { atmfM4MIBObjects 16 }
atmfM4CellProtoHistEntry OBJECT-TYPE
SYNTAX AtmfM4CellProtoHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ATM Forum M4 Cell Protocol Monitoring
History Data table.
Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it for each fifteen-
minute interval in which statistics are collected for it."
INDEX { ifIndex,
atmfM4CellProtoHistIndex }
::= { atmfM4CellProtoHistTable 1 }
AtmfM4CellProtoHistEntry ::= SEQUENCE {
atmfM4CellProtoHistIndex INTEGER,
atmfM4CellProtoHistSuspect TruthValue,
atmfM4CellProtoHistElapsedTime TimeInterval,
atmfM4CellProtoHistSupprIntvls Gauge32,
atmfM4CellProtoHistProtoErrors Gauge32,
atmfM4CellProtoHistInOAMCells Gauge32
}
atmfM4CellProtoHistIndex OBJECT-TYPE
SYNTAX INTEGER (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number between 1 and 96, which identifies the interval
for which the set of statistics in this entry was
collected.
The interval identified by 1 is the most recently completed
15 minute interval, and the interval identified by N is the
interval immediately preceding the one identified by N-1."
::= { atmfM4CellProtoHistEntry 1 }
atmfM4CellProtoHistSuspect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the statistics in this entry may be unreliable."
::= { atmfM4CellProtoHistEntry 2 }
atmfM4CellProtoHistElapsedTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted."
::= { atmfM4CellProtoHistEntry 3 }
atmfM4CellProtoHistSupprIntvls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is non-zero only if the ATM NE is
suppressing ATM Cell Protocol Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.
When non-zero, this attribute represents the number of
'all-zeroes' intervals that were suppressed immediately
prior to this 'non-all-zeroes' history interval.
Note that the suppression of 'all-zeroes' intervals is
controlled by the atmfM4NeSuppressZeroStats object."
::= { atmfM4CellProtoHistEntry 4 }
atmfM4CellProtoHistProtoErrors OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ATM cells dropped on this interface, due to
an unrecognized field or set of fields in the ATM cell
header, during this interval."
::= { atmfM4CellProtoHistEntry 5 }
atmfM4CellProtoHistInOAMCells OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OAM cells received at this interface during
this interval."
::= { atmfM4CellProtoHistEntry 6 }
-- ATM Cell Protocol Monitoring Error Log (per interface, error code)
atmfM4CellProtoErrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4CellProtoErrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 Cell Protocol Monitoring Error Log
table.
This table maintains a record of the last error of each
type encountered on each interface, as a result of ATM
Cell Protocol Monitoring."
::= { atmfM4MIBObjects 17 }
atmfM4CellProtoErrorEntry OBJECT-TYPE
SYNTAX AtmfM4CellProtoErrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ATM Forum M4 Cell Protocol Monitoring
Error Log table.
Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it for each error
that has occurred since agent start-up."
INDEX { ifIndex,
atmfM4CellProtoErrorCode }
::= { atmfM4CellProtoErrorTable 1 }
AtmfM4CellProtoErrorEntry ::= SEQUENCE {
atmfM4CellProtoErrorCode Integer32,
atmfM4CellProtoErrorTime TimeStamp,
atmfM4CellProtoErrorReason INTEGER,
atmfM4CellProtoErrorVpi INTEGER,
atmfM4CellProtoErrorVci INTEGER
}
atmfM4CellProtoErrorCode OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the type of error for which this entry contains
information. The range and interpretation of this error
code value is left up to the individual agent implementor."
::= { atmfM4CellProtoErrorEntry 1 }
atmfM4CellProtoErrorTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of sysUpTime when the error occurred."
::= { atmfM4CellProtoErrorEntry 2 }
atmfM4CellProtoErrorReason OBJECT-TYPE
SYNTAX INTEGER {
unassignedVpiVciValue(1),
outOfRangeVpiVciValue(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cell header abnormality type: the reason for discarding
the ATM cell (i.e., unassigned VPI/VCI value or VPI/VCI
value out of range)."
::= { atmfM4CellProtoErrorEntry 3 }
atmfM4CellProtoErrorVpi OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VPI value of the discarded cell."
::= { atmfM4CellProtoErrorEntry 4 }
atmfM4CellProtoErrorVci OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VCI value of the discarded cell."
::= { atmfM4CellProtoErrorEntry 5 }
-- TC Adapter Protocol Monitoring Current Data (per interface)
atmfM4TcProtoCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4TcProtoCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 TC Adapter Protocol Monitoring Current
Data table.
This table maintains per-interface statistics for the
fifteen-minute interval currently being collected."
::= { atmfM4MIBObjects 18 }
atmfM4TcProtoCurrEntry OBJECT-TYPE
SYNTAX AtmfM4TcProtoCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ATM Forum M4 TC Adapter Protocol Monitoring
Current Data table.
Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it."
INDEX { ifIndex }
::= { atmfM4TcProtoCurrTable 1 }
AtmfM4TcProtoCurrEntry ::= SEQUENCE {
atmfM4TcProtoCurrSuspect TruthValue,
atmfM4TcProtoCurrElapsedTime TimeInterval,
atmfM4TcProtoCurrSupprIntvls Gauge32,
atmfM4TcProtoCurrDiscardHECViol Gauge32
}
atmfM4TcProtoCurrSuspect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the statistics in this entry may be unreliable."
::= { atmfM4TcProtoCurrEntry 1 }
atmfM4TcProtoCurrElapsedTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted."
::= { atmfM4TcProtoCurrEntry 2 }
atmfM4TcProtoCurrSupprIntvls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is non-zero only if the ATM NE is
suppressing ATM TC Adapter Protocol Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.
When non-zero, this attribute represents the number of
'all-zeroes' intervals that were suppressed immediately
prior to the current interval.
Note that the suppression of 'all-zeroes' intervals is
controlled by the atmfM4NeSuppressZeroStats object."
::= { atmfM4TcProtoCurrEntry 3 }
atmfM4TcProtoCurrDiscardHECViol OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ATM cells discarded on this interface, due to
a HEC violation, since the start of this interval."
::= { atmfM4TcProtoCurrEntry 4 }
-- ATM TC Adapter Protocol Monitoring History Data (per interface and
-- time interval)
atmfM4TcProtoHistTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4TcProtoHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 TC Adapter Protocol Monitoring History
Data table.
This table maintains per-interface statistics for previous
fifteen-minute intervals."
::= { atmfM4MIBObjects 19 }
atmfM4TcProtoHistEntry OBJECT-TYPE
SYNTAX AtmfM4TcProtoHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ATM Forum M4 TC Adapter Protocol Monitoring
History Data table.
Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it for each fifteen-
minute interval in which statistics are collected for it."
INDEX { ifIndex,
atmfM4TcProtoHistIndex }
::= { atmfM4TcProtoHistTable 1 }
AtmfM4TcProtoHistEntry ::= SEQUENCE {
atmfM4TcProtoHistIndex INTEGER,
atmfM4TcProtoHistSuspect TruthValue,
atmfM4TcProtoHistElapsedTime TimeInterval,
atmfM4TcProtoHistSupprIntvls Gauge32,
atmfM4TcProtoHistDiscardHECViol Gauge32
}
atmfM4TcProtoHistIndex OBJECT-TYPE
SYNTAX INTEGER (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number between 1 and 96, which identifies the interval
for which the set of statistics in this entry was
collected.
The interval identified by 1 is the most recently completed
15 minute interval, and the interval identified by N is the
interval immediately preceding the one identified by N-1."
::= { atmfM4TcProtoHistEntry 1 }
atmfM4TcProtoHistSuspect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the statistics in this entry may be unreliable."
::= { atmfM4TcProtoHistEntry 2 }
atmfM4TcProtoHistElapsedTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted."
::= { atmfM4TcProtoHistEntry 3 }
atmfM4TcProtoHistSupprIntvls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is non-zero only if the ATM NE is
suppressing ATM Cell Protocol Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.
When non-zero, this attribute represents the number of
'all-zeroes' intervals that were suppressed immediately
prior to this 'non-all-zeroes' history interval.
Note that the suppression of 'all-zeroes' intervals is
controlled by the atmfM4NeSuppressZeroStats object."
::= { atmfM4TcProtoHistEntry 4 }
atmfM4TcProtoHistDiscardHECViol OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ATM cells discarded on this interface, due to
a HEC violation, during this interval."
::= { atmfM4TcProtoHistEntry 5 }
-- UPC/NPC Disagreement Monitoring Current Data (per VPL
-- termination point)
atmfM4VpUpcNpcCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4VpUpcNpcCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 UPC/NPC Disagreement Monitoring Current
Data table for VPL termination points.
This table maintains per-TP statistics for the
fifteen-minute interval currently being collected."
::= { atmfM4MIBObjects 20 }
atmfM4VpUpcNpcCurrEntry OBJECT-TYPE
SYNTAX AtmfM4VpUpcNpcCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ATM Forum M4 UPC/NPC Disagreement
Monitoring Current Data table for VPL termination points.
Each VPL Termination Point automatically has
an entry in this table associated with it."
INDEX { ifIndex,
atmVplVpi }
::= { atmfM4VpUpcNpcCurrTable 1 }
AtmfM4VpUpcNpcCurrEntry ::= SEQUENCE {
atmfM4VpUpcNpcCurrSuspect TruthValue,
atmfM4VpUpcNpcCurrElapsedTime TimeInterval,
atmfM4VpUpcNpcCurrSupprIntvls Gauge32,
atmfM4VpUpcNpcCurrDiscardedCells Gauge32,
atmfM4VpUpcNpcCurrDiscardedClp0 Gauge32,
atmfM4VpUpcNpcCurrPassedCells Gauge32,
atmfM4VpUpcNpcCurrPassedClp0 Gauge32
}
atmfM4VpUpcNpcCurrSuspect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the statistics in this entry may be unreliable."
::= { atmfM4VpUpcNpcCurrEntry 1 }
atmfM4VpUpcNpcCurrElapsedTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted."
::= { atmfM4VpUpcNpcCurrEntry 2 }
atmfM4VpUpcNpcCurrSupprIntvls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is non-zero only if the ATM NE is
suppressing UPC/NPC Disagreement Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.
When non-zero, this attribute represents the number of
'all-zeroes' intervals that were suppressed immediately
prior to the current interval.
Note that the suppression of 'all-zeroes' intervals is
controlled by the atmfM4NeSuppressZeroStats object."
::= { atmfM4VpUpcNpcCurrEntry 3 }
atmfM4VpUpcNpcCurrDiscardedCells OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discarded cells due to combined CLP=0 and
CLP=1 UPC/NPC policing."
::= { atmfM4VpUpcNpcCurrEntry 4 }
atmfM4VpUpcNpcCurrDiscardedClp0 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discarded CLP=0 cells due to CLP=0 only
UPC/NPC policing.
This object shall be present only if CLP=0 traffic is
separately policed."
::= { atmfM4VpUpcNpcCurrEntry 5 }
atmfM4VpUpcNpcCurrPassedCells OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of cells that have been successfully passed by
the combined CLP=0 and CLP=1 UPC/NPC policing."
::= { atmfM4VpUpcNpcCurrEntry 6 }
atmfM4VpUpcNpcCurrPassedClp0 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP=0 cells that have been successfully
passed by the CLP=0 UPC/NPC policing.
This object shall be present only if CLP=0 traffic is
separately policed."
::= { atmfM4VpUpcNpcCurrEntry 7 }
-- UPC/NPC Disagreement Monitoring History (per VPL termination
-- point and time interval)
atmfM4VpUpcNpcHistTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4VpUpcNpcHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 UPC/NPC Disagreement Monitoring History
Data table for VPL termination points.
This table maintains per-interface statistics for previous
fifteen-minute intervals."
::= { atmfM4MIBObjects 21 }
atmfM4VpUpcNpcHistEntry OBJECT-TYPE
SYNTAX AtmfM4VpUpcNpcHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ATM Forum M4 UPC/NPC Disagreement
Monitoring History Data table for VPL termination points.
Each VPL Termination Point automatically has
an entry in this table associated with it."
INDEX { ifIndex,
atmVplVpi,
atmfM4VpUpcNpcHistIndex }
::= { atmfM4VpUpcNpcHistTable 1 }
AtmfM4VpUpcNpcHistEntry ::= SEQUENCE {
atmfM4VpUpcNpcHistIndex INTEGER,
atmfM4VpUpcNpcHistSuspect TruthValue,
atmfM4VpUpcNpcHistElapsedTime TimeInterval,
atmfM4VpUpcNpcHistSupprIntvls Gauge32,
atmfM4VpUpcNpcHistDiscardedCells Gauge32,
atmfM4VpUpcNpcHistDiscardedClp0 Gauge32,
atmfM4VpUpcNpcHistPassedCells Gauge32,
atmfM4VpUpcNpcHistPassedClp0 Gauge32
}
atmfM4VpUpcNpcHistIndex OBJECT-TYPE
SYNTAX INTEGER (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number between 1 and 96, which identifies the interval
for which the set of statistics in this entry was
collected.
The interval identified by 1 is the most recently completed
15 minute interval, and the interval identified by N is the
interval immediately preceding the one identified by N-1."
::= { atmfM4VpUpcNpcHistEntry 1 }
atmfM4VpUpcNpcHistSuspect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the statistics in this entry may be unreliable."
::= { atmfM4VpUpcNpcHistEntry 2 }
atmfM4VpUpcNpcHistElapsedTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted."
::= { atmfM4VpUpcNpcHistEntry 3 }
atmfM4VpUpcNpcHistSupprIntvls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is non-zero only if the ATM NE is
suppressing UPC/NPC Disagreement Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.
When non-zero, this attribute represents the number of
'all-zeroes' intervals that were suppressed immediately
prior to this 'non-all-zeroes' history interval.
Note that the suppression of 'all-zeroes' intervals is
controlled by the atmfM4NeSuppressZeroStats object."
::= { atmfM4VpUpcNpcHistEntry 4 }
atmfM4VpUpcNpcHistDiscardedCells OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discarded cells due to combined CLP=0 and
CLP=1 UPC/NPC policing."
::= { atmfM4VpUpcNpcHistEntry 5 }
atmfM4VpUpcNpcHistDiscardedClp0 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discarded CLP=0 cells due to CLP=0 only
UPC/NPC policing.
This object shall be present only if CLP=0 traffic is
separately policed."
::= { atmfM4VpUpcNpcHistEntry 6 }
atmfM4VpUpcNpcHistPassedCells OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of cells that have been successfully passed by
the combined CLP=0 and CLP=1 UPC/NPC policing."
::= { atmfM4VpUpcNpcHistEntry 7 }
atmfM4VpUpcNpcHistPassedClp0 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP=0 cells that have been successfully
passed by the CLP=0 UPC/NPC policing.
This object shall be present only if CLP=0 traffic is
separately policed."
::= { atmfM4VpUpcNpcHistEntry 8 }
-- UPC/NPC Disagreement Monitoring Current Data (per VCL
-- termination point)
atmfM4VcUpcNpcCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4VcUpcNpcCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 UPC/NPC Disagreement Monitoring Current
Data table for VCL termination points.
This table maintains per-TP statistics for the
fifteen-minute interval currently being collected."
::= { atmfM4MIBObjects 22 }
atmfM4VcUpcNpcCurrEntry OBJECT-TYPE
SYNTAX AtmfM4VcUpcNpcCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ATM Forum M4 UPC/NPC Disagreement
Monitoring Current Data table for VCL termination points.
Each VCL Termination Point automatically has
an entry in this table associated with it."
INDEX { ifIndex,
atmVclVpi,
atmVclVci }
::= { atmfM4VcUpcNpcCurrTable 1 }
AtmfM4VcUpcNpcCurrEntry ::= SEQUENCE {
atmfM4VcUpcNpcCurrSuspect TruthValue,
atmfM4VcUpcNpcCurrElapsedTime TimeInterval,
atmfM4VcUpcNpcCurrSupprIntvls Gauge32,
atmfM4VcUpcNpcCurrDiscardedCells Gauge32,
atmfM4VcUpcNpcCurrDiscardedClp0 Gauge32,
atmfM4VcUpcNpcCurrPassedCells Gauge32,
atmfM4VcUpcNpcCurrPassedClp0 Gauge32
}
atmfM4VcUpcNpcCurrSuspect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the statistics in this entry may be unreliable."
::= { atmfM4VcUpcNpcCurrEntry 1 }
atmfM4VcUpcNpcCurrElapsedTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted."
::= { atmfM4VcUpcNpcCurrEntry 2 }
atmfM4VcUpcNpcCurrSupprIntvls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is non-zero only if the ATM NE is
suppressing UPC/NPC Disagreement Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.
When non-zero, this attribute represents the number of
'all-zeroes' intervals that were suppressed immediately
prior to the current interval.
Note that the suppression of 'all-zeroes' intervals is
controlled by the atmfM4NeSuppressZeroStats object."
::= { atmfM4VcUpcNpcCurrEntry 3 }
atmfM4VcUpcNpcCurrDiscardedCells OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discarded cells due to combined CLP=0 and
CLP=1 UPC/NPC policing."
::= { atmfM4VcUpcNpcCurrEntry 4 }
atmfM4VcUpcNpcCurrDiscardedClp0 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discarded CLP=0 cells due to CLP=0 only
UPC/NPC policing.
This object shall be present only if CLP=0 traffic is
separately policed."
::= { atmfM4VcUpcNpcCurrEntry 5 }
atmfM4VcUpcNpcCurrPassedCells OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of cells that have been successfully passed by
the combined CLP=0 and CLP=1 UPC/NPC policing."
::= { atmfM4VcUpcNpcCurrEntry 6 }
atmfM4VcUpcNpcCurrPassedClp0 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP=0 cells that have been successfully
passed by the CLP=0 UPC/NPC policing.
This object shall be present only if CLP=0 traffic is
separately policed."
::= { atmfM4VcUpcNpcCurrEntry 7 }
-- UPC/NPC Disagreement Monitoring History (per VCL termination
-- point and time interval)
atmfM4VcUpcNpcHistTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4VcUpcNpcHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 UPC/NPC Disagreement Monitoring History
Data table for VCL termination points.
This table maintains per-interface statistics for previous
fifteen-minute intervals."
::= { atmfM4MIBObjects 23 }
atmfM4VcUpcNpcHistEntry OBJECT-TYPE
SYNTAX AtmfM4VcUpcNpcHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ATM Forum M4 UPC/NPC Disagreement
Monitoring History Data table for VCL termination points.
Each VCL Termination Point automatically has
an entry in this table associated with it."
INDEX { ifIndex,
atmVclVpi,
atmVclVci,
atmfM4VcUpcNpcHistIndex }
::= { atmfM4VcUpcNpcHistTable 1 }
AtmfM4VcUpcNpcHistEntry ::= SEQUENCE {
atmfM4VcUpcNpcHistIndex INTEGER,
atmfM4VcUpcNpcHistSuspect TruthValue,
atmfM4VcUpcNpcHistElapsedTime TimeInterval,
atmfM4VcUpcNpcHistSupprIntvls Gauge32,
atmfM4VcUpcNpcHistDiscardedCells Gauge32,
atmfM4VcUpcNpcHistDiscardedClp0 Gauge32,
atmfM4VcUpcNpcHistPassedCells Gauge32,
atmfM4VcUpcNpcHistPassedClp0 Gauge32
}
atmfM4VcUpcNpcHistIndex OBJECT-TYPE
SYNTAX INTEGER (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number between 1 and 96, which identifies the interval
for which the set of statistics in this entry was
collected.
The interval identified by 1 is the most recently completed
15 minute interval, and the interval identified by N is the
interval immediately preceding the one identified by N-1."
::= { atmfM4VcUpcNpcHistEntry 1 }
atmfM4VcUpcNpcHistSuspect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, the statistics in this entry may be unreliable."
::= { atmfM4VcUpcNpcHistEntry 2 }
atmfM4VcUpcNpcHistElapsedTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted."
::= { atmfM4VcUpcNpcHistEntry 3 }
atmfM4VcUpcNpcHistSupprIntvls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is non-zero only if the ATM NE is
suppressing UPC/NPC Disagreement Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.
When non-zero, this attribute represents the number of
'all-zeroes' intervals that were suppressed immediately
prior to this 'non-all-zeroes' history interval.
Note that the suppression of 'all-zeroes' intervals is
controlled by the atmfM4NeSuppressZeroStats object."
::= { atmfM4VcUpcNpcHistEntry 4 }
atmfM4VcUpcNpcHistDiscardedCells OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discarded cells due to combined CLP=0 and
CLP=1 UPC/NPC policing."
::= { atmfM4VcUpcNpcHistEntry 5 }
atmfM4VcUpcNpcHistDiscardedClp0 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discarded CLP=0 cells due to CLP=0 only
UPC/NPC policing.
This object shall be present only if CLP=0 traffic is
separately policed."
::= { atmfM4VcUpcNpcHistEntry 6 }
atmfM4VcUpcNpcHistPassedCells OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of cells that have been successfully passed by
the combined CLP=0 and CLP=1 UPC/NPC policing."
::= { atmfM4VcUpcNpcHistEntry 7 }
atmfM4VcUpcNpcHistPassedClp0 OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLP=0 cells that have been successfully
passed by the CLP=0 UPC/NPC policing.
This object shall be present only if CLP=0 traffic is
separately policed."
::= { atmfM4VcUpcNpcHistEntry 8 }
-- ATM Forum M4 Test Types
atmfM4TestTypes OBJECT IDENTIFIER
::= { atmfM4MIBObjects 24 }
-- OAM Loopback Tests (VPL, VPC, VCL, and VCC termination points):
atmfM4TestOAMLoopbackSeg OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This identifies an OAM Loopback Test on a VPL, VPC,
VCL, or VCC termination point, using a segment OAM
cell.
The test type must have appended to it a code that uniquely
identifies an intermediate point responsible for looping
back the cell. If this is absent, the loopback is performed
at the end of the segment or connection.
E.g., the OID { atmfM4TestOAMLoopbackSeg 5 } identifies
that the loopback should be performed at the intermediate
point labeled 5."
::= { atmfM4TestTypes 1 }
atmfM4TestOAMLoopbackE2E OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This identifies an OAM Loopback Test on a VPL, VPC,
VCL, or VCC termination point, using an end-to-end OAM
cell."
::= { atmfM4TestTypes 2 }
-- ATM Forum M4 VP Termination Point Test Table
atmfM4VpTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4VpTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 VP Termination Point Test table.
This table allows tests to be run on VPL and VPC
termination points.
The operation of this table is entirely analogous to
that of the ifTestTable in RFC 1573 (which was later
deprecated in RFC 2233), except that the indexes into
this table are different."
::= { atmfM4MIBObjects 25 }
atmfM4VpTestEntry OBJECT-TYPE
SYNTAX AtmfM4VpTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing objects for invoking tests on a
VPL or VPC termination point."
INDEX { ifIndex,
atmVplVpi,
atmfM4VpTestObject }
::= { atmfM4VpTestTable 1 }
AtmfM4VpTestEntry ::= SEQUENCE {
atmfM4VpTestObject INTEGER,
atmfM4VpTestId TestAndIncr,
atmfM4VpTestStatus INTEGER,
atmfM4VpTestType AutonomousType,
atmfM4VpTestResult INTEGER,
atmfM4VpTestCode OBJECT IDENTIFIER,
atmfM4VpTestOwner OwnerString
}
atmfM4VpTestObject OBJECT-TYPE
SYNTAX INTEGER {
vplTp(1),
vpcTp(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies whether the test applies to the VPL termination
point with the specified VPI, or the VPC termination point."
::= { atmfM4VpTestEntry 1 }
atmfM4VpTestId OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the current invocation of the
interface's test."
::= { atmfM4VpTestEntry 2 }
atmfM4VpTestStatus OBJECT-TYPE
SYNTAX INTEGER { notInUse(1), inUse(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether or not some manager
currently has the necessary 'ownership' required to
invoke a test on this interface. A write to this
object is only successful when it changes its value
from 'notInUse(1)' to 'inUse(2)'. After completion of
a test, the agent resets the value back to
'notInUse(1)'."
::= { atmfM4VpTestEntry 3 }
atmfM4VpTestType OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A control variable used to start and stop operator-
initiated interface tests. Most OBJECT IDENTIFIER
values assigned to tests are defined elsewhere, in
association with specific types of interface.
However, this document assigns a value for a full-
duplex loopback test, and defines the special meanings
of the subject identifier:
noTest OBJECT IDENTIFIER ::= { 0 0 }
When the value noTest is written to this object, no
action is taken unless a test is in progress, in which
case the test is aborted. Writing any other value to
this object is only valid when no test is currently in
progress, in which case the indicated test is
initiated.
When read, this object always returns the most recent
value that atmfM4VpTestType was set to. If it has not been
set since the last initialization of the network
management subsystem on the agent, a value of noTest
is returned."
::= { atmfM4VpTestEntry 4 }
atmfM4VpTestResult OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no test yet requested
success(2),
inProgress(3),
notSupported(4),
unAbleToRun(5), -- due to state of system
aborted(6),
failed(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the result of the most recently
requested test, or the value none(1) if no tests have
been requested since the last reset. Note that this
facility provides no provision for saving the results
of one test when starting another, as could be
required if used by multiple managers concurrently."
::= { atmfM4VpTestEntry 5 }
atmfM4VpTestCode OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains a code which contains more
specific information on the test result, for example
an error-code after a failed test. Error codes and
other values this object may take are specific to the
type of interface and/or test. The value may have the
semantics of either the AutonomousType or
RowPointer textual conventions as defined in RFC
1903 [15]. The identifier:
testCodeUnknown OBJECT IDENTIFIER ::= { 0 0 }
is defined for use if no additional result code is
available."
::= { atmfM4VpTestEntry 6 }
atmfM4VpTestOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The entity which currently has the 'ownership'
required to invoke a test on this interface."
::= { atmfM4VpTestEntry 7 }
-- ATM Forum M4 VC Termination Point Test Table
atmfM4VcTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4VcTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 VC Termination Point Test table.
This table allows tests to be run on VCL and VCC
termination points.
The operation of this table is entirely analogous to
that of the ifTestTable in RFC 1573 (which was later
deprecated in RFC 2233), except that the indexes into
this table are different."
::= { atmfM4MIBObjects 26 }
atmfM4VcTestEntry OBJECT-TYPE
SYNTAX AtmfM4VcTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing objects for invoking tests on a
VCL or VCC termination point."
INDEX { ifIndex,
atmVclVpi,
atmVclVci,
atmfM4VcTestObject }
::= { atmfM4VcTestTable 1 }
AtmfM4VcTestEntry ::= SEQUENCE {
atmfM4VcTestObject INTEGER,
atmfM4VcTestId TestAndIncr,
atmfM4VcTestStatus INTEGER,
atmfM4VcTestType AutonomousType,
atmfM4VcTestResult INTEGER,
atmfM4VcTestCode OBJECT IDENTIFIER,
atmfM4VcTestOwner OwnerString
}
atmfM4VcTestObject OBJECT-TYPE
SYNTAX INTEGER {
vclTp(1),
vccTp(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies whether the test applies to the VCL termination
point with the specified VPI and VCI values, or to the VCC
termination point."
::= { atmfM4VcTestEntry 1 }
atmfM4VcTestId OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the current invocation of the
interface's test."
::= { atmfM4VcTestEntry 2 }
atmfM4VcTestStatus OBJECT-TYPE
SYNTAX INTEGER { notInUse(1), inUse(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether or not some manager
currently has the necessary 'ownership' required to
invoke a test on this interface. A write to this
object is only successful when it changes its value
from 'notInUse(1)' to 'inUse(2)'. After completion of
a test, the agent resets the value back to
'notInUse(1)'."
::= { atmfM4VcTestEntry 3 }
atmfM4VcTestType OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A control variable used to start and stop operator-
initiated interface tests. Most OBJECT IDENTIFIER
values assigned to tests are defined elsewhere, in
association with specific types of interface.
However, this document assigns a value for a full-
duplex loopback test, and defines the special meanings
of the subject identifier:
noTest OBJECT IDENTIFIER ::= { 0 0 }
When the value noTest is written to this object, no
action is taken unless a test is in progress, in which
case the test is aborted. Writing any other value to
this object is only valid when no test is currently in
progress, in which case the indicated test is
initiated.
When read, this object always returns the most recent
value that atmfM4VcTestType was set to. If it has not been
set since the last initialization of the network
management subsystem on the agent, a value of noTest
is returned."
::= { atmfM4VcTestEntry 4 }
atmfM4VcTestResult OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no test yet requested
success(2),
inProgress(3),
notSupported(4),
unAbleToRun(5), -- due to state of system
aborted(6),
failed(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the result of the most recently
requested test, or the value none(1) if no tests have
been requested since the last reset. Note that this
facility provides no provision for saving the results
of one test when starting another, as could be
required if used by multiple managers concurrently."
::= { atmfM4VcTestEntry 5 }
atmfM4VcTestCode OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains a code which contains more
specific information on the test result, for example
an error-code after a failed test. Error codes and
other values this object may take are specific to the
type of interface and/or test. The value may have the
semantics of either the AutonomousType or
RowPointer textual conventions as defined in RFC
1903 [15]. The identifier:
testCodeUnknown OBJECT IDENTIFIER ::= { 0 0 }
is defined for use if no additional result code is
available."
::= { atmfM4VcTestEntry 6 }
atmfM4VcTestOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The entity which currently has the 'ownership'
required to invoke a test on this termination point."
::= { atmfM4VcTestEntry 7 }
-- ATM Forum M4 Equipment Table
atmfM4EquipTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4EquipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 Equipment table. This table augments the
entPhysicalTable."
::= { atmfM4MIBObjects 28 }
atmfM4EquipEntry OBJECT-TYPE
SYNTAX AtmfM4EquipEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ATM Forum M4 Equipment table. Each entry
of this table represents a piece of equipment within the ATM
NE that neither is nor accepts a replaceable plug-in unit."
INDEX { entPhysicalIndex }
::= { atmfM4EquipTable 1 }
AtmfM4EquipEntry ::= SEQUENCE {
atmfM4EquipAdminStatus INTEGER,
atmfM4EquipLocation DisplayString,
atmfM4EquipOperStatus INTEGER,
atmfM4EquipVendor DisplayString,
atmfM4EquipVersion AutonomousType,
atmfM4EquipUserLabel DisplayString,
atmfM4EquipAlarmSeverityIndex Integer32
}
atmfM4EquipAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used by the administrator to lock and unlock the object."
::= { atmfM4EquipEntry 1 }
atmfM4EquipLocation OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The specific or general location of the component."
::= { atmfM4EquipEntry 2 }
atmfM4EquipOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attributes identifies whether or not the component is
capable of performing its normal functions."
::= { atmfM4EquipEntry 3 }
atmfM4EquipVendor OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor of the component."
::= { atmfM4EquipEntry 4 }
atmfM4EquipVersion OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the component."
::= { atmfM4EquipEntry 5 }
atmfM4EquipUserLabel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A user-friendly name for the piece of equipment. The
default value of this object is the null string."
::= { atmfM4EquipEntry 6 }
atmfM4EquipAlarmSeverityIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An index into the alarm severity profile table, specifying
the severity assignments for M4 alarms reported for this
component. The default value of this object is zero."
::= { atmfM4EquipEntry 7 }
-- ATM Forum M4 Equipment Holder Table
atmfM4EquipHolderTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4EquipHolderEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 Equipment Holder table. This table
augments the entPhysicalTable."
::= { atmfM4MIBObjects 29 }
atmfM4EquipHolderEntry OBJECT-TYPE
SYNTAX AtmfM4EquipHolderEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ATM Forum M4 Equipment Holder table. Each
entry of this table represents a component within the ATM NE
that accepts a replaceable plug-in unit."
INDEX { entPhysicalIndex }
::= { atmfM4EquipHolderTable 1 }
AtmfM4EquipHolderEntry ::= SEQUENCE {
atmfM4EquipHolderType INTEGER,
atmfM4EquipHolderAcceptableTypes DisplayString,
atmfM4EquipHolderSlotStatus INTEGER,
atmfM4EquipHolderSwLoad INTEGER
}
atmfM4EquipHolderType OBJECT-TYPE
SYNTAX INTEGER {
rack(1),
shelf(2),
drawer(3),
slot(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the component."
::= { atmfM4EquipHolderEntry 1 }
atmfM4EquipHolderAcceptableTypes OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The types of plug-in units that can be supported by the
slot, separated by newline characters.
This attribute shall be present only when the Equipment
Holder represents a slot."
::= { atmfM4EquipHolderEntry 2 }
atmfM4EquipHolderSlotStatus OBJECT-TYPE
SYNTAX INTEGER {
empty(1),
full(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attributes identifies whether or not a plug-in unit is
present in the slot.
This attribute shall be present only when the Equipment
Holder represents a slot."
::= { atmfM4EquipHolderEntry 3 }
atmfM4EquipHolderSwLoad OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An index into the installed software table, specifying
the software that is to be loaded into the plug-in unit
whenever an automatic reload of software is needed.
This attribute shall be present only when the Equipment
Holder represents a slot."
::= { atmfM4EquipHolderEntry 4 }
-- ATM Forum M4 Plug-In Unit Table
atmfM4PlugInUnitTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4PlugInUnitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 Plug-In Unit table. This table augments
the entPhysicalTable."
::= { atmfM4MIBObjects 30 }
atmfM4PlugInUnitEntry OBJECT-TYPE
SYNTAX AtmfM4PlugInUnitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ATM Forum M4 Plug-In Unit table. Each
entry of this table represents a piece of equipment within
the ATM NE that is inserted into and removed from an
Equipment Holder."
INDEX { entPhysicalIndex }
::= { atmfM4PlugInUnitTable 1 }
AtmfM4PlugInUnitEntry ::= SEQUENCE {
atmfM4PlugInUnitAdminStatus INTEGER,
atmfM4PlugInUnitAvailStatus INTEGER,
atmfM4PlugInUnitOperStatus INTEGER,
atmfM4PlugInUnitVendor DisplayString,
atmfM4PlugInUnitVersion AutonomousType,
atmfM4PlugInUnitAlarmSeverityIndex Integer32
}
atmfM4PlugInUnitAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used by the administrator to lock and unlock the object."
::= { atmfM4PlugInUnitEntry 1 }
atmfM4PlugInUnitAvailStatus OBJECT-TYPE
SYNTAX INTEGER {
available(1),
inTest(2),
failed(3),
powerOff(4),
notInstalled(5),
offLine(6),
dependency(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides further information regarding the state of the
component."
::= { atmfM4PlugInUnitEntry 2 }
atmfM4PlugInUnitOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attributes identifies whether or not the component is
capable of performing its normal functions."
::= { atmfM4PlugInUnitEntry 3 }
atmfM4PlugInUnitVendor OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor of the component."
::= { atmfM4PlugInUnitEntry 4 }
atmfM4PlugInUnitVersion OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the component."
::= { atmfM4PlugInUnitEntry 5 }
atmfM4PlugInUnitAlarmSeverityIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An index into the alarm severity profile table, specifying
the severity assignments for M4 alarms reported for this
component. The default value of this object is zero."
::= { atmfM4PlugInUnitEntry 6 }
-- ATM Forum M4 Hardware Unit/Running Software Relationship Table
atmfM4HwRunningSwTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4HwRunningSwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 Hardware Unit/Running Software
relationship table. This table describes the software that
is running on each hardware unit in the ATM NE."
::= { atmfM4MIBObjects 32 }
atmfM4HwRunningSwEntry OBJECT-TYPE
SYNTAX AtmfM4HwRunningSwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ATM Forum M4 Hardware Unit/Running Software
relationship table. Each entry of this table identifies an
entry in the entPhysicalTable and one in the hrSWRunTable."
INDEX { atmfM4HwRunningSwHwIndex,
atmfM4HwRunningSwIndex }
::= { atmfM4HwRunningSwTable 1 }
AtmfM4HwRunningSwEntry ::= SEQUENCE {
atmfM4HwRunningSwHwIndex INTEGER,
atmfM4HwRunningSwIndex INTEGER,
atmfM4HwRunningSwSwIndex INTEGER
}
atmfM4HwRunningSwHwIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index, in the entPhysicalTable, of the containing
hardware unit in this pair."
::= { atmfM4HwRunningSwEntry 1 }
atmfM4HwRunningSwIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique number within the context of the containing
hardware unit."
::= { atmfM4HwRunningSwEntry 2 }
atmfM4HwRunningSwSwIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index, in the hrSWRunTable, of the software product
represented by this entry."
::= { atmfM4HwRunningSwEntry 3 }
-- ATM Forum M4 Hardware Unit/Installed Software Relationship Table
atmfM4HwInstalledSwTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4HwInstalledSwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 Hardware Unit/Installed Software
relationship table. This table describes the software that
is installed on each hardware unit in the ATM NE."
::= { atmfM4MIBObjects 33 }
atmfM4HwInstalledSwEntry OBJECT-TYPE
SYNTAX AtmfM4HwInstalledSwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ATM Forum M4 Hardware Unit/Installed
Software relationship table. Each entry of this table
identifies an entry in the entPhysicalTable and one in
the hrSWInstalledTable."
INDEX { atmfM4HwInstalledSwHwIndex,
atmfM4HwInstalledSwIndex }
::= { atmfM4HwInstalledSwTable 1 }
AtmfM4HwInstalledSwEntry ::= SEQUENCE {
atmfM4HwInstalledSwHwIndex INTEGER,
atmfM4HwInstalledSwIndex INTEGER,
atmfM4HwInstalledSwSwIndex INTEGER,
atmfM4HwSwAlarmSeverityIndex Integer32
}
atmfM4HwInstalledSwHwIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index, in the entPhysicalTable, of the containing
physical entity in this pair."
::= { atmfM4HwInstalledSwEntry 1 }
atmfM4HwInstalledSwIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique number within the context of the containing
hardware unit."
::= { atmfM4HwInstalledSwEntry 2 }
atmfM4HwInstalledSwSwIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index, in the hrSWInstalledTable, of the software
product represented by this entry."
::= { atmfM4HwInstalledSwEntry 3 }
atmfM4HwSwAlarmSeverityIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An index into the alarm severity profile table, specifying
the severity assignments for M4 alarms reported for this
piece of software installed on the hardware unit. The
default value of this object is zero."
::= { atmfM4HwInstalledSwEntry 4 }
-- ATM Forum M4 Alarm Severity Identifier Textual Convention
AtmfM4AlarmLogSeverity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value of this object identifies the severity of
an alarm in the log, including 'cleared'."
SYNTAX INTEGER {
cleared(-1),
indeterminate(0),
critical(1),
major(2),
minor(3),
warning(4)
}
AtmfM4AlarmSeverity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value of this object identifies the severity of
an alarm that has occurred. (Note that there is no
value corresponding to 'cleared'.)"
SYNTAX INTEGER {
indeterminate(0),
critical(1),
major(2),
minor(3),
warning(4)
}
-- ATM Forum M4 Alarm Severity Profile Table
atmfM4AlarmSevDefault OBJECT-TYPE
SYNTAX AtmfM4AlarmSeverity
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default severity value used for new profile
index/trap ID pairs that have not yet been modified.
This value is also used whenever an object's alarm
severity profile index is set to 0. The default value
of this object is minor(3)."
::= { atmfM4MIBObjects 34 }
atmfM4AlarmSevProfileIndexNext OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used for
atmfM4AlarmSevProfileIndex when creating entries in the
atmfM4AlarmSevProfileTable.
The value -1 indicates that no unassigned entries are
available.
To obtain the index value for a new entry, the manager
issues a management protocol retrieval operation to obtain
the current value of this object. After each retrieval, the
agent should modify the value to the next unassigned index
(or -1)."
::= { atmfM4MIBObjects 35 }
atmfM4AlarmSevProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4AlarmSevProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 alarm severity profile table.
This table specifies which profiles exist. Creating
or deleting an entry in this table automatically
creates or deletes the corresponding entries in the
atmfM4AlarmSeverityTable."
::= { atmfM4MIBObjects 36 }
atmfM4AlarmSevProfileEntry OBJECT-TYPE
SYNTAX AtmfM4AlarmSevProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A group of severities, one for each alarm type in
the communications alarm group."
INDEX { atmfM4AlarmSevProfileIndex }
::= { atmfM4AlarmSevProfileTable 1 }
AtmfM4AlarmSevProfileEntry ::= SEQUENCE {
atmfM4AlarmSevProfileIndex Integer32,
atmfM4AlarmSevProfileRowStatus RowStatus
}
atmfM4AlarmSevProfileIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number identifying this alarm severity profile."
::= { atmfM4AlarmSevProfileEntry 1 }
atmfM4AlarmSevProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to delete
an existing row in the table."
::= { atmfM4AlarmSevProfileEntry 2 }
-- ATM Forum M4 Alarm Severity Table
atmfM4AlarmSevTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4AlarmSevEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 alarm severity table.
This table associates profile index and trap
ID pairs with severities to be used for
M4 alarm traps that have occurred.
(Note that this table does not apply to cleared alarms.)"
::= { atmfM4MIBObjects 37 }
atmfM4AlarmSevEntry OBJECT-TYPE
SYNTAX AtmfM4AlarmSevEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table associates an alarm severity
profile index/trap ID pair with a severity.
Deleting a particular profile's row in the alarm severity
profile table deletes all rows in this table with the
same profile index.
Conceptually, rows corresponding to all possible trap ID's
are created in this table when a new alarm severity profile
is created, but the agent will return a default value
except for those few traps for which values have been set."
INDEX { atmfM4AlarmSevProfileIndex,
atmfM4AlarmSevTrapId }
::= { atmfM4AlarmSevTable 1 }
AtmfM4AlarmSevEntry ::= SEQUENCE {
atmfM4AlarmSevTrapId OBJECT IDENTIFIER,
atmfM4AlarmSeverity AtmfM4AlarmSeverity
}
atmfM4AlarmSevTrapId OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of the trap type to which this entry applies."
::= { atmfM4AlarmSevEntry 1 }
atmfM4AlarmSeverity OBJECT-TYPE
SYNTAX AtmfM4AlarmSeverity
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The severity to be used for this trap type when the TrapId
is selected.
If no value for this object has ever been set since
the corresponding profile was created, the agent should
return the value of the object atmfM4AlarmSevDefault."
::= { atmfM4AlarmSevEntry 2 }
-- ATM Forum M4 Alarm Forwarding Discriminator Table
atmfM4ForwardAllTraps OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is used as the value of the object
atmfM4ForwardedTrapObject when traps from all objects
are to be forwarded, or when there is only one
object of the type that forwards the specified
trap type."
::= { atmfM4MIBObjects 38 }
atmfM4TrapForwardingTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4TrapForwardingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 Trap forwarding discriminator
table.
This table specifies which traps will be sent to
which management system."
::= { atmfM4MIBObjects 39 }
atmfM4TrapForwardingEntry OBJECT-TYPE
SYNTAX AtmfM4TrapForwardingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a group of traps to be sent to
a particular IP address.
A new entry must have values for all attributes that
do not have default values before its RowStatus column
can be set to active(1)."
INDEX { atmfM4TrapForwardingIndex }
::= { atmfM4TrapForwardingTable 1 }
AtmfM4TrapForwardingEntry ::= SEQUENCE {
atmfM4TrapForwardingIndex Integer32,
atmfM4TrapForwardingDest IpAddress,
atmfM4ForwardedTrapId OBJECT IDENTIFIER,
atmfM4ForwardedTrapObject RowPointer,
atmfM4TrapForwardingPort Integer32,
atmfM4LowestForwardedSeverity AtmfM4AlarmSeverity,
atmfM4ForwardedIndeterminate TruthValue,
atmfM4TrapForwardingRowStatus RowStatus
}
atmfM4TrapForwardingIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique number identifying the table entry."
::= { atmfM4TrapForwardingEntry 1 }
atmfM4TrapForwardingDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address to which traps identified by this
table entry should be sent."
::= { atmfM4TrapForwardingEntry 2 }
atmfM4ForwardedTrapId OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ID of the trap type to which this entry applies."
::= { atmfM4TrapForwardingEntry 3 }
atmfM4ForwardedTrapObject OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object to which this entry applies.
By convention, this is the name of the first object in
the row in the table referenced.
The special value { 0 0 } indicates that
traps of this type from all objects of the type that can
generate it. It should also be used when traps from the
ATM NE are to be specified."
::= { atmfM4TrapForwardingEntry 4 }
atmfM4TrapForwardingPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The UDP port on the specified management system to
which traps identified by this entry should be sent."
DEFVAL { 162 }
::= { atmfM4TrapForwardingEntry 5 }
atmfM4LowestForwardedSeverity OBJECT-TYPE
SYNTAX AtmfM4AlarmSeverity
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The lowest severity of traps of this type from
the specified object that should be sent to this
address.
This object has significance only if the trap type
specified has a severity associated with it."
DEFVAL { minor }
::= { atmfM4TrapForwardingEntry 6 }
atmfM4ForwardedIndeterminate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When this object has the value TRUE, traps with
indeterminate severity will be forwarded to the
specified event.
This object has significance only if the trap type
specified has a severity associated with it."
DEFVAL { false }
::= { atmfM4TrapForwardingEntry 7 }
atmfM4TrapForwardingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to delete
an existing row in the table."
::= { atmfM4TrapForwardingEntry 8 }
-- ATM Forum M4 Trap Agent MIB Log Table
atmfM4TrapLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4TrapLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 Trap Agent log table.
This table defines the trap logs currently maintained
by the agent.
The management system creates entries in this table to
specify which types of traps, from which ATM network
elements, should be logged.
Deleting an entry in this table deletes all entries in
the corresponding log."
::= { atmfM4MIBObjects 40 }
atmfM4TrapLogEntry OBJECT-TYPE
SYNTAX AtmfM4TrapLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single trap log."
INDEX { atmfM4TrapLogSrc,
atmfM4TrapLogType }
::= { atmfM4TrapLogTable 1 }
AtmfM4TrapLogEntry ::= SEQUENCE {
atmfM4TrapLogSrc IpAddress,
atmfM4TrapLogType INTEGER,
atmfM4TrapLogAdminStatus INTEGER,
atmfM4TrapLogOperStatus INTEGER,
atmfM4TrapLogFullAction INTEGER,
atmfM4TrapLogRowStatus RowStatus
}
atmfM4TrapLogSrc OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the SNMP agent whose traps are
stored in this log."
::= { atmfM4TrapLogEntry 1 }
atmfM4TrapLogType OBJECT-TYPE
SYNTAX INTEGER {
objectCreated(1),
objectDeleted(2),
configChange(3),
stateChange(4),
alarm(5)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of traps stored in this log."
::= { atmfM4TrapLogEntry 2 }
atmfM4TrapLogAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The management system uses this object to stop and
start the operations of this object."
DEFVAL { up }
::= { atmfM4TrapLogEntry 3 }
atmfM4TrapLogOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
logFull(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not the log is capable of
performing its normal operations."
::= { atmfM4TrapLogEntry 4 }
atmfM4TrapLogFullAction OBJECT-TYPE
SYNTAX INTEGER {
halt(1),
wrap(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the action that should be performed when no
more log entries can be created due to a log-full
condition. If the value of this object is wrap(2),
each new log entry will cause the deletion of the oldest
entry still in the log, for as long as the log is still
full."
DEFVAL { wrap }
::= { atmfM4TrapLogEntry 5 }
atmfM4TrapLogRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or to delete
an existing row in the table."
::= { atmfM4TrapLogEntry 6 }
-- ATM Forum M4 Trap Agent MIB Logged Trap Table
atmfM4LoggedTrapTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4LoggedTrapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 Trap Agent logged trap table.
This table is used to maintain the traps logged."
::= { atmfM4MIBObjects 41 }
atmfM4LoggedTrapEntry OBJECT-TYPE
SYNTAX AtmfM4LoggedTrapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single trap in the log.
Entries in this table are created automatically but
can be deleted by the management system.
Entries that represent 'alarm' log types are augmented
by the atmfM4LoggedAlarmEntry table."
INDEX { atmfM4TrapLogSrc,
atmfM4TrapLogType,
atmfM4LoggedTrapIndex }
::= { atmfM4LoggedTrapTable 1 }
AtmfM4LoggedTrapEntry ::= SEQUENCE {
atmfM4LoggedTrapIndex Unsigned32,
atmfM4LoggedTrapTime DateAndTime,
atmfM4LoggedTrapID Integer32,
atmfM4LoggedTrapObject RowPointer,
atmfM4LoggedTrapRowStatus RowStatus
}
atmfM4LoggedTrapIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique number identifying this entry in the log.
When the maximum value for this object has been reached,
it will wrap around to 0."
::= { atmfM4LoggedTrapEntry 1 }
atmfM4LoggedTrapTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time at which this trap was logged."
::= { atmfM4LoggedTrapEntry 2 }
atmfM4LoggedTrapID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of trap to which this entry applies.
Together with the logged trap ID object, this object
specifies the entity to which this logged trap referred."
::= { atmfM4LoggedTrapEntry 3 }
atmfM4LoggedTrapObject OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object to which this entry applies.
By convention, this is the name of the first object in
the row in the table referenced.
Together with the logged trap ID object, this object
specifies the entity to which this logged trap referred.
The special value { 0 0 } indicates that the trap refers
to the ATM NE entity itself."
::= { atmfM4LoggedTrapEntry 4 }
atmfM4LoggedTrapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to delete an existing row in the
table. Note that the only value to which a management
system can set this object is destroy(6)."
::= { atmfM4LoggedTrapEntry 5 }
-- ATM Forum M4 Trap Agent MIB Logged Alarm Table
atmfM4LoggedAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfM4LoggedAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM Forum M4 Trap Agent logged alarm trap table.
This table is used to maintain extra information for
logged traps that represent alarm types."
::= { atmfM4MIBObjects 42 }
atmfM4LoggedAlarmEntry OBJECT-TYPE
SYNTAX AtmfM4LoggedAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the alarm-specific attributes of
a single trap in the log."
INDEX { atmfM4TrapLogSrc,
atmfM4TrapLogType,
atmfM4LoggedTrapIndex }
::= { atmfM4LoggedAlarmTable 1 }
AtmfM4LoggedAlarmEntry ::= SEQUENCE {
atmfM4LoggedAlarmSeverity AtmfM4AlarmLogSeverity,
atmfM4LoggedAlarmBackedUp TruthValue,
atmfM4LoggedAlarmBUObject RowPointer,
atmfM4LoggedAlarmSpecificProb DisplayString,
atmfM4LoggedAlarmRepairAct DisplayString
}
atmfM4LoggedAlarmSeverity OBJECT-TYPE
SYNTAX AtmfM4AlarmLogSeverity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The perceived severity of the alarm, as specified by
the agent that generated it."
::= { atmfM4LoggedAlarmEntry 1 }
atmfM4LoggedAlarmBackedUp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of this object is true, the agent reported
in this trap that the failed object had been backed up.
This object is only present if it was included in the
alarm trap corresponding to this log entry."
::= { atmfM4LoggedAlarmEntry 2 }
atmfM4LoggedAlarmBUObject OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the object that provided back-up services to
the failed object.
This object is only present if it was included in the
alarm trap corresponding to this log entry."
::= { atmfM4LoggedAlarmEntry 3 }
atmfM4LoggedAlarmSpecificProb OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates further refinements to the problem identified
by the alarm type. If more than one specific problem
is described in this object, the problem descriptions are
separated by newline characters.
This object is only present if it was included in the
alarm trap corresponding to this log entry."
::= { atmfM4LoggedAlarmEntry 4 }
atmfM4LoggedAlarmRepairAct OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates proposed repair actions reported by the agent
for the problem identified by the alarm. If more than
one action is described in this object, the problem
descriptions are separated by newline characters.
This object is only present if it was included in the
alarm trap corresponding to this log entry."
::= { atmfM4LoggedAlarmEntry 5 }
-- ATM M4 MIB Notification types
-- Auxiliary definitions for alarms
-- Except for perceived severity, the following objects may be
-- optionally appended to any alarm notification.
atmfM4TrapAlarmSeverity OBJECT-TYPE
SYNTAX AtmfM4AlarmLogSeverity
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The perceived severity of the alarm, as specified by
the agent that generated it."
::= { atmfM4MIBObjects 43 }
atmfM4TrapAlarmBackedUp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"If the value of this object is true, the failed object
has been backed up."
::= { atmfM4MIBObjects 44 }
atmfM4TrapAlarmBUObject OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the object that provided back-up services to
the failed object."
::= { atmfM4MIBObjects 45 }
atmfM4TrapAlarmSpecificProb OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates further refinements to the problem identified
by the alarm type. If more than one specific problem
is described in this object, the problem descriptions are
separated by newline characters."
::= { atmfM4MIBObjects 46 }
atmfM4TrapAlarmRepairAct OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates proposed repair actions reported by the agent
for the problem identified by the alarm. If more than
one action is described in this object, the problem
descriptions are separated by newline characters."
::= { atmfM4MIBObjects 47 }
-- ATM M4 MIB Notifications
-- Note that index values for interfaces, hardware units, VPL TPs,
-- VCL TPs, etc. can be derived from the instance values of the
-- objects included in the notifications. As examples, the ifIndex
-- value for an interface can be derived from the ifOperStatus
-- instance value, whereas the entPhysicalIndex value can be derived
-- from any of the entPhysicalContainedIn, entPhysicalParentRelPos,
-- and entPhysicalClass instance values.
-- Communications Alarms (interface)
atmfM4IfAisAlarm NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmfM4TrapAlarmSeverity }
STATUS current
DESCRIPTION
"Indicates that an AIS alarm condition has occurred
on the physical path TP associated with the specified
interface."
::= { atmfM4MIBTrapPrefix 1 }
atmfM4IfLcdAlarm NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmfM4TrapAlarmSeverity }
STATUS current
DESCRIPTION
"Indicates that an LCD (Loss of Cell Delineation)
condition has occurred on the TC Adapter associated
with the specified interface."
::= { atmfM4MIBTrapPrefix 2 }
atmfM4IfLofAlarm NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmfM4TrapAlarmSeverity }
STATUS current
DESCRIPTION
"Indicates that an LOF (Loss of Frame)
condition has occurred on the physical path TP associated
with the specified interface."
::= { atmfM4MIBTrapPrefix 3 }
atmfM4IfLopAlarm NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmfM4TrapAlarmSeverity }
STATUS current
DESCRIPTION
"Indicates that an LOP (Loss of Pointer)
condition has occurred on the physical path TP associated
with the specified interface."
::= { atmfM4MIBTrapPrefix 4 }
atmfM4IfLosAlarm NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmfM4TrapAlarmSeverity }
STATUS current
DESCRIPTION
"Indicates that an LOS (Loss of Signal)
condition has occurred on the physical path TP associated
with the specified interface."
::= { atmfM4MIBTrapPrefix 5 }
atmfM4IfPayloadMismatchAlarm NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmfM4TrapAlarmSeverity }
STATUS current
DESCRIPTION
"Indicates that a payload type mismatch condition has
occurred on the physical path TP associated with the specified
interface."
::= { atmfM4MIBTrapPrefix 6 }
atmfM4IfXmissionErrAlarm NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmfM4TrapAlarmSeverity }
STATUS current
DESCRIPTION
"Indicates that an transmission error condition has occurred
on the physical path TP associated with the specified
interface."
::= { atmfM4MIBTrapPrefix 7 }
atmfM4IfPathTraceMismatchAlarm NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmfM4TrapAlarmSeverity }
STATUS current
DESCRIPTION
"Indicates that path trace mismatch condition has occurred
on the physical path TP associated with the specified
interface."
::= { atmfM4MIBTrapPrefix 8 }
atmfM4IfRdiAlarm NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmfM4TrapAlarmSeverity }
STATUS current
DESCRIPTION
"Indicates that an RDI (Remote Defect Indication)
condition has occurred on the physical path TP associated
with the specified interface."
::= { atmfM4MIBTrapPrefix 9 }
atmfM4IfSignalLabelMismatchAlarm NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmfM4TrapAlarmSeverity }
STATUS current
DESCRIPTION
"Indicates that a signal label mismatch has occurred
on the physical path TP associated with the specified
interface."
::= { atmfM4MIBTrapPrefix 10 }
-- Communications alarms (VPL termination point)
atmfM4VplTpAisAlarm NOTIFICATION-TYPE
OBJECTS { ifOperStatus,
atmVplOperStatus,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that an AIS alarm condition has occurred
on the VPL TP associated with the specified
interface and VPI."
::= { atmfM4MIBTrapPrefix 11 }
atmfM4VplTpRdiAlarm NOTIFICATION-TYPE
OBJECTS { ifOperStatus,
atmVplOperStatus,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that an RDI (Remote Defect Indication)
condition has occurred on the VPL TP associated
with the specified interface and VPI."
::= { atmfM4MIBTrapPrefix 12 }
-- Communications alarms (VPC termination point)
atmfM4VpcTpAisAlarm NOTIFICATION-TYPE
OBJECTS { ifOperStatus,
atmVplOperStatus,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that an AIS alarm condition has occurred
on the VPC TP associated with the specified
interface and VPI."
::= { atmfM4MIBTrapPrefix 13 }
atmfM4VpcTpRdiAlarm NOTIFICATION-TYPE
OBJECTS { ifOperStatus,
atmVplOperStatus,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that an RDI (Remote Defect Indication)
condition has occurred on the VPC TP associated
with the specified interface and VPI."
::= { atmfM4MIBTrapPrefix 14 }
-- Communications alarms (VCL termination point)
atmfM4VclTpAisAlarm NOTIFICATION-TYPE
OBJECTS { ifOperStatus,
atmVclOperStatus,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that an AIS alarm condition has occurred
on the VCL TP associated with the specified
interface, VPI, and VCI."
::= { atmfM4MIBTrapPrefix 15 }
atmfM4VclTpRdiAlarm NOTIFICATION-TYPE
OBJECTS { ifOperStatus,
atmVclOperStatus,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that an RDI (Remote Defect Indication)
condition has occurred on the VCL TP associated
with the specified interface, VPI, and VCI."
::= { atmfM4MIBTrapPrefix 16 }
-- Communications alarms (VCC termination point)
atmfM4VccTpAisAlarm NOTIFICATION-TYPE
OBJECTS { ifOperStatus,
atmVclOperStatus,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that an AIS alarm condition has occurred
on the VCC TP associated with the specified
interface, VPI, and VCI."
::= { atmfM4MIBTrapPrefix 17 }
atmfM4VccTpRdiAlarm NOTIFICATION-TYPE
OBJECTS { ifOperStatus,
atmVclOperStatus,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that an RDI (Remote Defect Indication)
condition has occurred on the VCC TP associated
with the specified interface, VPI, and VCI."
::= { atmfM4MIBTrapPrefix 18 }
-- ATM NE and Hardware Unit Alarms
atmfM4HwBackPlaneAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a back-plane failure condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 19 }
atmfM4HwCallEstErrAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a call establishment error condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 20 }
atmfM4HwCongestionAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a congestion condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 21 }
atmfM4HwExtIfDevProbAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that an external interface device problem
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 22 }
atmfM4HwLineCardAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a line-card problem condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 23 }
atmfM4HwMultiplexerAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a multiplexer problem condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 24 }
atmfM4HwPowerAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a power problem alarm condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 25 }
atmfM4HwProcessorAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a processor problem alarm condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 26 }
atmfM4HwProtectionPathAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a protection path problem condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 27 }
atmfM4HwReceiverFailAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a receiver failure condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 28 }
atmfM4HwPIUnitMissingAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a plug-in unit missing condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 29 }
atmfM4HwPIUnitProbAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a plug-in unit problem condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 30 }
atmfM4HwPIUnitMismatchAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a plug-in unit type mismatch condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 31 }
atmfM4HwTimingProbAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a timing problem alarm condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 32 }
atmfM4HwXmitterFailAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a transmitter failure condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 33 }
atmfM4HwTrunkCardAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a trunk-card problem condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 34 }
atmfM4HwStorageCapacityAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a storage capacity problem condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 35 }
atmfM4HwMemoryMismatchAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a memory mismatch alarm condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 36 }
atmfM4HwCorruptDataAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a corrupt data alarm condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 37 }
atmfM4HwSwEnvironAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a software environment problem
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 38 }
atmfM4HwSwDownloadFailAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a software download failure
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 39 }
atmfM4HwVersionMismatchAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a version mismatch condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 40 }
atmfM4HwFanFailAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a cooling fan failure condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 41 }
atmfM4HwDoorOpenAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that an enclosure door open condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 42 }
atmfM4HwFuseFailAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a fuse failure alarm condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 43 }
atmfM4HwHighTempAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a high temperature condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 44 }
-- Software alarms
atmfM4SwVersionMismatchAlarm NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass,
atmfM4HwInstalledSwSwIndex,
atmfM4TrapAlarmSeverity
}
STATUS current
DESCRIPTION
"Indicates that a version mismatch condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table."
::= { atmfM4MIBTrapPrefix 45 }
-- State change notification traps
atmfM4VplTpUp NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmVplOperStatus }
STATUS current
DESCRIPTION
"Indicates that the operational state of the specified
VPL termination point has transitioned to 'up'."
::= { atmfM4MIBTrapPrefix 46 }
atmfM4VplTpDown NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmVplOperStatus }
STATUS current
DESCRIPTION
"Indicates that the operational state of the specified
VPL termination point has transitioned to 'down'."
::= { atmfM4MIBTrapPrefix 47 }
atmfM4VclTpUp NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmVclOperStatus }
STATUS current
DESCRIPTION
"Indicates that the operational state of the specified
VCL termination point has transitioned to 'up'."
::= { atmfM4MIBTrapPrefix 48 }
atmfM4VclTpDown NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmVclOperStatus }
STATUS current
DESCRIPTION
"Indicates that the operational state of the specified
VCL termination point has transitioned to 'down'."
::= { atmfM4MIBTrapPrefix 49 }
atmfM4VplXConnUp NOTIFICATION-TYPE
OBJECTS { atmVpCrossConnectL2HOperStatus,
atmVpCrossConnectH2LOperStatus
}
STATUS current
DESCRIPTION
"Indicates that the operational state of the specified
VPL cross-connection has transitioned to 'up'."
::= { atmfM4MIBTrapPrefix 50 }
atmfM4VplXConnDown NOTIFICATION-TYPE
OBJECTS { atmVpCrossConnectL2HOperStatus,
atmVpCrossConnectH2LOperStatus
}
STATUS current
DESCRIPTION
"Indicates that the operational state of the specified
VPL cross-connection has transitioned to 'down'."
::= { atmfM4MIBTrapPrefix 51 }
atmfM4VclXConnUp NOTIFICATION-TYPE
OBJECTS { atmVcCrossConnectL2HOperStatus,
atmVcCrossConnectH2LOperStatus
}
STATUS current
DESCRIPTION
"Indicates that the operational state of the specified
VCL cross-connection has transitioned to 'up'."
::= { atmfM4MIBTrapPrefix 52 }
atmfM4VclXConnDown NOTIFICATION-TYPE
OBJECTS { atmVcCrossConnectL2HOperStatus,
atmVcCrossConnectH2LOperStatus
}
STATUS current
DESCRIPTION
"Indicates that the operational state of the specified
VCL cross-connection has transitioned to 'down'."
::= { atmfM4MIBTrapPrefix 53 }
atmfM4HwUnitUp NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass
}
STATUS current
DESCRIPTION
"Indicates that the operational state of the specified
hardware unit has transitioned to 'up'."
::= { atmfM4MIBTrapPrefix 54 }
atmfM4HwUnitDown NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass
}
STATUS current
DESCRIPTION
"Indicates that the operational state of the specified
hardware unit has transitioned to 'down'."
::= { atmfM4MIBTrapPrefix 55 }
-- Object creation and deletion notification traps
atmfM4AtmCellIfCreated NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmfM4IfType }
STATUS current
DESCRIPTION
"Indicates that an ATM cell layer interface has just
been created on the interface."
::= { atmfM4MIBTrapPrefix 56 }
atmfM4AtmCellIfDeleted NOTIFICATION-TYPE
OBJECTS { ifOperStatus }
STATUS current
DESCRIPTION
"Indicates that the ATM cell layer interface has just
been deleted."
::= { atmfM4MIBTrapPrefix 57 }
atmfM4VpcTpCreated NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmVplOperStatus }
STATUS current
DESCRIPTION
"Indicates that the VPC termination point has just
been created."
::= { atmfM4MIBTrapPrefix 58 }
atmfM4VpcTpDeleted NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmVplOperStatus }
STATUS current
DESCRIPTION
"Indicates that the VPC termination point has just
been deleted."
::= { atmfM4MIBTrapPrefix 59 }
atmfM4VccTpCreated NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmVclOperStatus }
STATUS current
DESCRIPTION
"Indicates that the VCC termination point has just
been created."
::= { atmfM4MIBTrapPrefix 60 }
atmfM4VccTpDeleted NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmVclOperStatus }
STATUS current
DESCRIPTION
"Indicates that the VCC termination point has just
been deleted."
::= { atmfM4MIBTrapPrefix 61 }
atmfM4VplXConnCreated NOTIFICATION-TYPE
OBJECTS { atmVpCrossConnectL2HOperStatus,
atmVpCrossConnectH2LOperStatus
}
STATUS current
DESCRIPTION
"Indicates that the VPL cross-connection has just
been created. When a cross-connection is created along
with its VPL endpoints, this trap should be emitted
to indicate the creation of the entire group of objects."
::= { atmfM4MIBTrapPrefix 62 }
atmfM4VplXConnDeleted NOTIFICATION-TYPE
OBJECTS { atmVpCrossConnectL2HOperStatus,
atmVpCrossConnectH2LOperStatus
}
STATUS current
DESCRIPTION
"Indicates that the VPL cross-connection has just
been deleted. When a cross-connection is deleted along
with its VPL endpoints, this trap should be emitted
to indicate the deletion of the entire group of objects."
::= { atmfM4MIBTrapPrefix 63 }
atmfM4VclXConnCreated NOTIFICATION-TYPE
OBJECTS { atmVcCrossConnectL2HOperStatus,
atmVcCrossConnectH2LOperStatus
}
STATUS current
DESCRIPTION
"Indicates that the VCL cross-connection has just
been created. When a cross-connection is created along
with its VCL endpoints, this trap should be emitted
to indicate the creation of the entire group of objects."
::= { atmfM4MIBTrapPrefix 64 }
atmfM4VclXConnDeleted NOTIFICATION-TYPE
OBJECTS { atmVcCrossConnectL2HOperStatus,
atmVcCrossConnectH2LOperStatus
}
STATUS current
DESCRIPTION
"Indicates that the VCL cross-connection has just
been deleted. When a cross-connection is deleted along
with its VCL endpoints, this trap should be emitted
to indicate the deletion of the entire group of objects."
::= { atmfM4MIBTrapPrefix 65 }
atmfM4HwUnitCreated NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass
}
STATUS current
DESCRIPTION
"Indicates that the specified hardware unit has been
installed at the specified location."
::= { atmfM4MIBTrapPrefix 66 }
atmfM4HwUnitDeleted NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass
}
STATUS current
DESCRIPTION
"Indicates that the specified hardware unit has been
removed or de-installed from the specified location."
::= { atmfM4MIBTrapPrefix 67 }
atmfM4InstalledSwCreated NOTIFICATION-TYPE
OBJECTS { atmfM4HwInstalledSwSwIndex,
hrSWInstalledIndex,
hrSWInstalledName
}
STATUS current
DESCRIPTION
"Indicates that the specified software package has been
installed."
::= { atmfM4MIBTrapPrefix 68 }
atmfM4InstalledSwDeleted NOTIFICATION-TYPE
OBJECTS { atmfM4HwInstalledSwSwIndex,
hrSWInstalledIndex,
hrSWInstalledName
}
STATUS current
DESCRIPTION
"Indicates that the specified software package has been
removed."
::= { atmfM4MIBTrapPrefix 69 }
-- Configuration change notification traps
atmfM4IfChanged NOTIFICATION-TYPE
OBJECTS { ifOperStatus }
STATUS current
DESCRIPTION
"Indicates that the configuration of the interface has
been changed."
::= { atmfM4MIBTrapPrefix 70 }
atmfM4VplTpChanged NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmVplOperStatus }
STATUS current
DESCRIPTION
"Indicates that the VPL termination point configuration
has been changed."
::= { atmfM4MIBTrapPrefix 71 }
atmfM4VclTpChanged NOTIFICATION-TYPE
OBJECTS { ifOperStatus, atmVclOperStatus }
STATUS current
DESCRIPTION
"Indicates that the VCL termination point configuration
has been changed."
::= { atmfM4MIBTrapPrefix 72 }
atmfM4VplXConnChanged NOTIFICATION-TYPE
OBJECTS { atmVpCrossConnectL2HOperStatus,
atmVpCrossConnectH2LOperStatus
}
STATUS current
DESCRIPTION
"Indicates that the VPL cross-connection configuration
has been changed."
::= { atmfM4MIBTrapPrefix 73 }
atmfM4VclXConnChanged NOTIFICATION-TYPE
OBJECTS { atmVcCrossConnectL2HOperStatus,
atmVcCrossConnectH2LOperStatus
}
STATUS current
DESCRIPTION
"Indicates that the VCL cross-connection configuration
has been changed."
::= { atmfM4MIBTrapPrefix 74 }
atmfM4HwUnitChanged NOTIFICATION-TYPE
OBJECTS { entPhysicalContainedIn,
entPhysicalParentRelPos,
entPhysicalClass
}
STATUS current
DESCRIPTION
"Indicates that the specified hardware unit configuration
has changed."
::= { atmfM4MIBTrapPrefix 75 }
atmfM4InstalledSwChanged NOTIFICATION-TYPE
OBJECTS { hrSWInstalledIndex }
STATUS current
DESCRIPTION
"Indicates that the specified software package configuration
has changed."
::= { atmfM4MIBTrapPrefix 76 }
-- Conformance statements
atmfM4Groups OBJECT IDENTIFIER ::= { atmfM4MIBConformance 1 }
atmfM4Compliances OBJECT IDENTIFIER ::= { atmfM4MIBConformance 2 }
-- compliance statements
atmfM4Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statements are listed as a set up conformance
units that correspond to each table. Support for all tables
is mandatory."
MODULE -- this module
MANDATORY-GROUPS {
atmfM4General,
atmfM4PhysPathTpGroup,
atmfM4TcAdapterGroup,
atmfM4AtmLayerGroup,
atmfM4VplGroup,
atmfM4VclGroup,
atmfM4VpXConnGroup,
atmfM4VcXConnGroup,
atmfM4VpNextVpiGroup,
atmfM4VcNextVciGroup,
atmfM4CellProtoCurrGroup,
atmfM4CellProtoHistGroup,
atmfM4CellProtoErrorGroup,
atmfM4TcProtoCurrGroup,
atmfM4TcProtoHistGroup,
atmfM4VpUpcNpcCurrGroup,
atmfM4VpUpcNpcHistGroup,
atmfM4VcUpcNpcCurrGroup,
atmfM4VcUpcNpcHistGroup,
atmfM4VpTestGroup,
atmfM4VcTestGroup,
atmfM4EquipGroup,
atmfM4EquipHolderGroup,
atmfM4PlugInUnitGroup,
atmfM4HwRunningSwGroup,
atmfM4HwInstalledSwGroup,
atmfM4AlarmSevGroup,
atmfM4TrapForwardingGroup,
atmfM4TrapLogGroup,
atmfM4LoggedTrapGroup,
atmfM4LoggedAlarmGroup,
atmfM4NotificationsGroup
}
OBJECT atmfM4TcACellScrambling
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is required only for a TC Adapter
which allows deactivation of cell scrambling."
OBJECT atmfM4IfLoopbackLocationCode
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is only required for an ATM cell
layer interface whose atmfM4IfType is not none(0)."
OBJECT atmfM4IfSubscriberAddress
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is required only for an ATM cell
layer interface whose atmfM4IfType is uni(1)."
OBJECT atmfM4IfPreferredCarrier
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is only required for an ATM cell
layer interface whose atmfM4IfType is uni(1) and which
supports SVC services."
OBJECT atmfM4IfFarEndCarrierNetwork
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is only required for an ATM cell
layer interface whose atmfM4IfType is bici(2) and which
supports SVC services."
OBJECT atmfM4VpNextVpiValue
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object to supply unused VPI values for
use in creating entries in the atmVplTable is optional."
OBJECT atmfM4VcNextVciValue
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object to supply unused VCI values for
use in creating entries in the atmVclTable is optional."
OBJECT atmfM4VpUpcNpcCurrDiscardedClp0
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is required only if CLP=0 traffic
is separately policed."
OBJECT atmfM4VpUpcNpcCurrPassedClp0
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is required only if CLP=0 traffic
is separately policed."
OBJECT atmfM4VpUpcNpcHistDiscardedClp0
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is required only if CLP=0 traffic
is separately policed."
OBJECT atmfM4VpUpcNpcHistPassedClp0
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is required only if CLP=0 traffic
is separately policed."
OBJECT atmfM4VcUpcNpcCurrDiscardedClp0
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is required only if CLP=0 traffic
is separately policed."
OBJECT atmfM4VcUpcNpcCurrPassedClp0
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is required only if CLP=0 traffic
is separately policed."
OBJECT atmfM4VcUpcNpcHistDiscardedClp0
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is required only if CLP=0 traffic
is separately policed."
OBJECT atmfM4VcUpcNpcHistPassedClp0
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is required only if CLP=0 traffic
is separately policed."
OBJECT atmfM4EquipHolderAcceptableTypes
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is required only for an Equipment
Holder that represents a slot."
OBJECT atmfM4EquipHolderSlotStatus
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is required only for an Equipment
Holder that represents a slot."
OBJECT atmfM4EquipHolderSwLoad
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is required only for an Equipment
Holder that represents a slot."
OBJECT atmfM4LoggedAlarmBackedUp
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is required only for a logged alarm
trap table entry whose corresponding alarm trap included the
atmfM4TrapAlarmBackup object."
OBJECT atmfM4LoggedAlarmBUObject
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is required only for a logged alarm
trap table entry whose corresponding alarm trap included the
atmfM4TrapAlarmBUObject object."
OBJECT atmfM4LoggedAlarmSpecificProb
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is required only for a logged alarm
trap table entry whose corresponding alarm trap included the
atmfM4TrapAlarmSpecificProb object."
OBJECT atmfM4LoggedAlarmRepairAct
MIN-ACCESS not-accessible
DESCRIPTION
"Support for this object is required only for a logged alarm
trap table entry whose corresponding alarm trap included the
atmfM4TrapAlarmRepairAct object."
::= { atmfM4Compliances 1 }
-- units of conformance
atmfM4General OBJECT-GROUP
OBJECTS {
atmfM4NeVendor,
atmfM4NeVersion,
atmfM4NeStartTime,
atmfM4NeAlarmSeverityIndex,
atmfM4NeSuppressZeroStats
}
STATUS current
DESCRIPTION
"The ATM Forum M4 ATM NE high-level objects."
::= { atmfM4Groups 1}
atmfM4PhysPathTpGroup OBJECT-GROUP
OBJECTS {
atmfM4PhysPathTpHwUnitIndex,
atmfM4PhysPathTpPortID,
atmfM4PhysPathTpAlarmSeverityIndex
}
STATUS current
DESCRIPTION
"The ATM Forum M4 interface Configuration table extensions
for the physical path termination point."
::= { atmfM4Groups 2 }
atmfM4TcAdapterGroup OBJECT-GROUP
OBJECTS {
atmfM4TcACellScrambling,
atmfM4TcAlarmSeverityIndex
}
STATUS current
DESCRIPTION
"The ATM Forum M4 interface Configuration table extensions
for the TC Adapter."
::= { atmfM4Groups 3 }
atmfM4AtmLayerGroup OBJECT-GROUP
OBJECTS {
atmfM4IfType,
atmfM4IfLoopbackLocationCode,
atmfM4IfSubscriberAddress,
atmfM4IfPreferredCarrier,
atmfM4IfFarEndCarrierNetwork
}
STATUS current
DESCRIPTION
"The ATM Forum M4 interface Configuration table extensions
for the ATM cell layer."
::= { atmfM4Groups 4 }
atmfM4VplGroup OBJECT-GROUP
OBJECTS {
atmfM4VplSegEndPt
}
STATUS current
DESCRIPTION
"The ATM Forum M4 VPL Termination Point Configuration
table extensions. "
::= { atmfM4Groups 5 }
atmfM4VclGroup OBJECT-GROUP
OBJECTS {
atmfM4VclSegEndPt
}
STATUS current
DESCRIPTION
"The ATM Forum M4 VCL Termination Point Configuration
table extensions."
::= { atmfM4Groups 6 }
atmfM4VpXConnGroup OBJECT-GROUP
OBJECTS {
atmfM4VpXConnRecover
}
STATUS current
DESCRIPTION
"The ATM Forum M4 VP Cross-Connect Configuration table
extensions."
::= { atmfM4Groups 7 }
atmfM4VcXConnGroup OBJECT-GROUP
OBJECTS {
atmfM4VcXConnRecover
}
STATUS current
DESCRIPTION
"The ATM Forum M4 VC Cross-Connect Configuration table
extensions."
::= { atmfM4Groups 8 }
atmfM4VpNextVpiGroup OBJECT-GROUP
OBJECTS {
atmfM4VpNextVpiValue
}
STATUS current
DESCRIPTION
"The ATM Forum M4 VP Next VPI value table."
::= { atmfM4Groups 9 }
atmfM4VcNextVciGroup OBJECT-GROUP
OBJECTS {
atmfM4VcNextVciValue
}
STATUS current
DESCRIPTION
"The ATM Forum M4 VC Next VCI value table."
::= { atmfM4Groups 10 }
atmfM4CellProtoCurrGroup OBJECT-GROUP
OBJECTS {
atmfM4CellProtoCurrSuspect,
atmfM4CellProtoCurrElapsedTime,
atmfM4CellProtoCurrSupprIntvls,
atmfM4CellProtoCurrProtoErrors,
atmfM4CellProtoCurrInOAMCells
}
STATUS current
DESCRIPTION
"The ATM Forum M4 Cell Protocol Monitoring Current Data
table."
::= { atmfM4Groups 11 }
atmfM4CellProtoHistGroup OBJECT-GROUP
OBJECTS {
atmfM4CellProtoHistSuspect,
atmfM4CellProtoHistElapsedTime,
atmfM4CellProtoHistSupprIntvls,
atmfM4CellProtoHistProtoErrors,
atmfM4CellProtoHistInOAMCells
}
STATUS current
DESCRIPTION
"The ATM Forum M4 Cell Protocol Monitoring History Data
table."
::= { atmfM4Groups 12 }
atmfM4CellProtoErrorGroup OBJECT-GROUP
OBJECTS {
atmfM4CellProtoErrorTime,
atmfM4CellProtoErrorReason,
atmfM4CellProtoErrorVpi,
atmfM4CellProtoErrorVci
}
STATUS current
DESCRIPTION
"The ATM Forum M4 Cell Protocol Monitoring Error Log table."
::= { atmfM4Groups 13 }
atmfM4TcProtoCurrGroup OBJECT-GROUP
OBJECTS {
atmfM4TcProtoCurrSuspect,
atmfM4TcProtoCurrElapsedTime,
atmfM4TcProtoCurrSupprIntvls,
atmfM4TcProtoCurrDiscardHECViol
}
STATUS current
DESCRIPTION
"The ATM Forum M4 TC Adapter Protocol Monitoring Current
Data table."
::= { atmfM4Groups 14 }
atmfM4TcProtoHistGroup OBJECT-GROUP
OBJECTS {
atmfM4TcProtoHistSuspect,
atmfM4TcProtoHistElapsedTime,
atmfM4TcProtoHistSupprIntvls,
atmfM4TcProtoHistDiscardHECViol
}
STATUS current
DESCRIPTION
"The ATM Forum M4 TC Adapter Protocol Monitoring History
Data table."
::= { atmfM4Groups 15 }
atmfM4VpUpcNpcCurrGroup OBJECT-GROUP
OBJECTS {
atmfM4VpUpcNpcCurrSuspect,
atmfM4VpUpcNpcCurrElapsedTime,
atmfM4VpUpcNpcCurrSupprIntvls,
atmfM4VpUpcNpcCurrDiscardedCells,
atmfM4VpUpcNpcCurrDiscardedClp0,
atmfM4VpUpcNpcCurrPassedCells,
atmfM4VpUpcNpcCurrPassedClp0
}
STATUS current
DESCRIPTION
"The ATM Forum M4 UPC/NPC Disagreement Monitoring Current
Data table for VPL termination points."
::= { atmfM4Groups 16 }
atmfM4VpUpcNpcHistGroup OBJECT-GROUP
OBJECTS {
atmfM4VpUpcNpcHistSuspect,
atmfM4VpUpcNpcHistElapsedTime,
atmfM4VpUpcNpcHistSupprIntvls,
atmfM4VpUpcNpcHistDiscardedCells,
atmfM4VpUpcNpcHistDiscardedClp0,
atmfM4VpUpcNpcHistPassedCells,
atmfM4VpUpcNpcHistPassedClp0
}
STATUS current
DESCRIPTION
"The ATM Forum M4 UPC/NPC Disagreement Monitoring History
Data table for VPL termination points."
::= { atmfM4Groups 17 }
atmfM4VcUpcNpcCurrGroup OBJECT-GROUP
OBJECTS {
atmfM4VcUpcNpcCurrSuspect,
atmfM4VcUpcNpcCurrElapsedTime,
atmfM4VcUpcNpcCurrSupprIntvls,
atmfM4VcUpcNpcCurrDiscardedCells,
atmfM4VcUpcNpcCurrDiscardedClp0,
atmfM4VcUpcNpcCurrPassedCells,
atmfM4VcUpcNpcCurrPassedClp0
}
STATUS current
DESCRIPTION
"The ATM Forum M4 UPC/NPC Disagreement Monitoring Current
Data table for VCL termination points."
::= { atmfM4Groups 18 }
atmfM4VcUpcNpcHistGroup OBJECT-GROUP
OBJECTS {
atmfM4VcUpcNpcHistSuspect,
atmfM4VcUpcNpcHistElapsedTime,
atmfM4VcUpcNpcHistSupprIntvls,
atmfM4VcUpcNpcHistDiscardedCells,
atmfM4VcUpcNpcHistDiscardedClp0,
atmfM4VcUpcNpcHistPassedCells,
atmfM4VcUpcNpcHistPassedClp0
}
STATUS current
DESCRIPTION
"The ATM Forum M4 UPC/NPC Disagreement Monitoring History
Data table for VCL termination points."
::= { atmfM4Groups 19 }
atmfM4VpTestGroup OBJECT-GROUP
OBJECTS {
atmfM4VpTestId,
atmfM4VpTestStatus,
atmfM4VpTestType,
atmfM4VpTestResult,
atmfM4VpTestCode,
atmfM4VpTestOwner
}
STATUS current
DESCRIPTION
"The ATM Forum M4 VP Termination Point Test table."
::= { atmfM4Groups 20 }
atmfM4VcTestGroup OBJECT-GROUP
OBJECTS {
atmfM4VcTestId,
atmfM4VcTestStatus,
atmfM4VcTestType,
atmfM4VcTestResult,
atmfM4VcTestCode,
atmfM4VcTestOwner
}
STATUS current
DESCRIPTION
"The ATM Forum M4 VC Termination Point Test table."
::= { atmfM4Groups 21 }
atmfM4EquipGroup OBJECT-GROUP
OBJECTS {
atmfM4EquipAdminStatus,
atmfM4EquipLocation,
atmfM4EquipOperStatus,
atmfM4EquipVendor,
atmfM4EquipVersion,
atmfM4EquipUserLabel,
atmfM4EquipAlarmSeverityIndex
}
STATUS current
DESCRIPTION
"The ATM Forum M4 Equipment table."
::= { atmfM4Groups 22 }
atmfM4EquipHolderGroup OBJECT-GROUP
OBJECTS {
atmfM4EquipHolderType,
atmfM4EquipHolderAcceptableTypes,
atmfM4EquipHolderSlotStatus,
atmfM4EquipHolderSwLoad
}
STATUS current
DESCRIPTION
"The ATM Forum M4 Equipment Holder table."
::= { atmfM4Groups 23 }
atmfM4PlugInUnitGroup OBJECT-GROUP
OBJECTS {
atmfM4PlugInUnitAdminStatus,
atmfM4PlugInUnitAvailStatus,
atmfM4PlugInUnitOperStatus,
atmfM4PlugInUnitVendor,
atmfM4PlugInUnitVersion,
atmfM4PlugInUnitAlarmSeverityIndex
}
STATUS current
DESCRIPTION
"The ATM Forum M4 Plug-In Unit table."
::= { atmfM4Groups 24 }
atmfM4HwRunningSwGroup OBJECT-GROUP
OBJECTS {
atmfM4HwRunningSwSwIndex
}
STATUS current
DESCRIPTION
"The ATM Forum M4 Hardware Unit/Running Software table."
::= { atmfM4Groups 25 }
atmfM4HwInstalledSwGroup OBJECT-GROUP
OBJECTS {
atmfM4HwInstalledSwSwIndex,
atmfM4HwSwAlarmSeverityIndex
}
STATUS current
DESCRIPTION
"The ATM Forum M4 Hardware Unit/Installed Software table."
::= { atmfM4Groups 26 }
atmfM4AlarmSevGroup OBJECT-GROUP
OBJECTS {
atmfM4AlarmSevProfileRowStatus,
atmfM4AlarmSeverity,
atmfM4AlarmSevDefault,
atmfM4AlarmSevProfileIndexNext
}
STATUS current
DESCRIPTION
"The ATM Forum M4 Alarm handling objects."
::= { atmfM4Groups 27 }
atmfM4TrapForwardingGroup OBJECT-GROUP
OBJECTS {
atmfM4TrapForwardingDest,
atmfM4ForwardedTrapId,
atmfM4ForwardedTrapObject,
atmfM4TrapForwardingPort,
atmfM4LowestForwardedSeverity,
atmfM4ForwardedIndeterminate,
atmfM4TrapForwardingRowStatus
}
STATUS current
DESCRIPTION
"The ATM Forum M4 Trap forwarding table."
::= { atmfM4Groups 28 }
atmfM4TrapLogGroup OBJECT-GROUP
OBJECTS {
atmfM4TrapLogAdminStatus,
atmfM4TrapLogOperStatus,
atmfM4TrapLogFullAction,
atmfM4TrapLogRowStatus
}
STATUS current
DESCRIPTION
"The ATM Forum M4 Trap Agent log table."
::= { atmfM4Groups 29 }
atmfM4LoggedTrapGroup OBJECT-GROUP
OBJECTS {
atmfM4LoggedTrapTime,
atmfM4LoggedTrapID,
atmfM4LoggedTrapObject,
atmfM4LoggedTrapRowStatus
}
STATUS current
DESCRIPTION
"The ATM Forum M4 Trap Agent logged trap table."
::= { atmfM4Groups 30 }
atmfM4LoggedAlarmGroup OBJECT-GROUP
OBJECTS {
atmfM4LoggedAlarmSeverity,
atmfM4LoggedAlarmBackedUp,
atmfM4LoggedAlarmBUObject,
atmfM4LoggedAlarmSpecificProb,
atmfM4LoggedAlarmRepairAct,
atmfM4TrapAlarmSeverity,
atmfM4TrapAlarmBackedUp,
atmfM4TrapAlarmBUObject,
atmfM4TrapAlarmSpecificProb,
atmfM4TrapAlarmRepairAct
}
STATUS current
DESCRIPTION
"The ATM Forum M4 Trap Agent logged alarm trap table."
::= { atmfM4Groups 31 }
atmfM4NotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
atmfM4IfAisAlarm,
atmfM4IfLcdAlarm,
atmfM4IfLofAlarm,
atmfM4IfLopAlarm,
atmfM4IfLosAlarm,
atmfM4IfPayloadMismatchAlarm,
atmfM4IfXmissionErrAlarm,
atmfM4IfPathTraceMismatchAlarm,
atmfM4IfRdiAlarm,
atmfM4IfSignalLabelMismatchAlarm,
atmfM4VplTpAisAlarm,
atmfM4VplTpRdiAlarm,
atmfM4VpcTpAisAlarm,
atmfM4VpcTpRdiAlarm,
atmfM4VclTpAisAlarm,
atmfM4VclTpRdiAlarm,
atmfM4VccTpAisAlarm,
atmfM4VccTpRdiAlarm,
atmfM4HwBackPlaneAlarm,
atmfM4HwCallEstErrAlarm,
atmfM4HwCongestionAlarm,
atmfM4HwExtIfDevProbAlarm,
atmfM4HwLineCardAlarm,
atmfM4HwMultiplexerAlarm,
atmfM4HwPowerAlarm,
atmfM4HwProcessorAlarm,
atmfM4HwProtectionPathAlarm,
atmfM4HwReceiverFailAlarm,
atmfM4HwPIUnitMissingAlarm,
atmfM4HwPIUnitProbAlarm,
atmfM4HwPIUnitMismatchAlarm,
atmfM4HwTimingProbAlarm,
atmfM4HwXmitterFailAlarm,
atmfM4HwTrunkCardAlarm,
atmfM4HwStorageCapacityAlarm,
atmfM4HwMemoryMismatchAlarm,
atmfM4HwCorruptDataAlarm,
atmfM4HwSwEnvironAlarm,
atmfM4HwSwDownloadFailAlarm,
atmfM4HwVersionMismatchAlarm,
atmfM4HwFanFailAlarm,
atmfM4HwDoorOpenAlarm,
atmfM4HwFuseFailAlarm,
atmfM4HwHighTempAlarm,
atmfM4SwVersionMismatchAlarm,
atmfM4VplTpUp,
atmfM4VplTpDown,
atmfM4VclTpUp,
atmfM4VclTpDown,
atmfM4VplXConnUp,
atmfM4VplXConnDown,
atmfM4VclXConnUp,
atmfM4VclXConnDown,
atmfM4HwUnitUp,
atmfM4HwUnitDown,
atmfM4AtmCellIfCreated,
atmfM4AtmCellIfDeleted,
atmfM4VpcTpCreated,
atmfM4VpcTpDeleted,
atmfM4VccTpCreated,
atmfM4VccTpDeleted,
atmfM4VplXConnCreated,
atmfM4VplXConnDeleted,
atmfM4VclXConnCreated,
atmfM4VclXConnDeleted,
atmfM4HwUnitCreated,
atmfM4HwUnitDeleted,
atmfM4InstalledSwCreated,
atmfM4InstalledSwDeleted,
atmfM4IfChanged,
atmfM4VplTpChanged,
atmfM4VclTpChanged,
atmfM4VplXConnChanged,
atmfM4VclXConnChanged,
atmfM4HwUnitChanged,
atmfM4InstalledSwChanged
}
STATUS current
DESCRIPTION
"The ATM Forum M4 notification list."
::= { atmfM4Groups 32 }
END