1473 lines
50 KiB
Plaintext
1473 lines
50 KiB
Plaintext
BRIDGE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- MIB for IEEE 802.1D devices
|
|
-- ---------------------------------------------------------- --
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
Counter32, Integer32, TimeTicks, mib-2
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, MacAddress
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
InterfaceIndex FROM IF-MIB
|
|
;
|
|
|
|
dot1dBridge MODULE-IDENTITY
|
|
LAST-UPDATED "200509190000Z"
|
|
ORGANIZATION "IETF Bridge MIB Working Group"
|
|
CONTACT-INFO
|
|
"Email: bridge-mib@ietf.org
|
|
|
|
K.C. Norseth (Editor)
|
|
L-3 Communications
|
|
Tel: +1 801-594-2809
|
|
Email: kenyon.c.norseth@L-3com.com
|
|
Postal: 640 N. 2200 West.
|
|
Salt Lake City, Utah 84116-0850
|
|
|
|
Les Bell (Editor)
|
|
3Com Europe Limited
|
|
Phone: +44 1442 438025
|
|
Email: elbell@ntlworld.com
|
|
Postal: 3Com Centre, Boundary Way
|
|
Hemel Hempstead
|
|
Herts. HP2 7YU
|
|
UK
|
|
|
|
Send comments to <bridge-mib@ietf.org>"
|
|
DESCRIPTION
|
|
"The Bridge MIB module for managing devices that support
|
|
IEEE 802.1D.
|
|
|
|
Copyright (C) The Internet Society (2005). This version of
|
|
this MIB module is part of RFC 4188; see the RFC itself for
|
|
full legal notices."
|
|
REVISION "200509190000Z"
|
|
DESCRIPTION
|
|
"Third revision, published as part of RFC 4188.
|
|
|
|
The MIB module has been converted to SMIv2 format.
|
|
Conformance statements have been added and some
|
|
description and reference clauses have been updated.
|
|
|
|
The object dot1dStpPortPathCost32 was added to
|
|
support IEEE 802.1t and the permissible values of
|
|
dot1dStpPriority and dot1dStpPortPriority have been
|
|
clarified for bridges supporting IEEE 802.1t or
|
|
IEEE 802.1w.
|
|
|
|
The interpretation of dot1dStpTimeSinceTopologyChange
|
|
has been clarified for bridges supporting the Rapid
|
|
Spanning Tree Protocol (RSTP)."
|
|
REVISION "199307310000Z"
|
|
DESCRIPTION
|
|
"Second revision, published as part of RFC 1493."
|
|
REVISION "199112310000Z"
|
|
DESCRIPTION
|
|
"Initial revision, published as part of RFC 1286."
|
|
::= { mib-2 17 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- Textual Conventions
|
|
-- ---------------------------------------------------------- --
|
|
|
|
BridgeId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Bridge-Identifier, as used in the Spanning Tree
|
|
Protocol, to uniquely identify a bridge. Its first two
|
|
octets (in network byte order) contain a priority value,
|
|
and its last 6 octets contain the MAC address used to
|
|
refer to a bridge in a unique fashion (typically, the
|
|
numerically smallest MAC address of all ports on the
|
|
bridge)."
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
|
|
Timeout ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Spanning Tree Protocol (STP) timer in units of 1/100
|
|
seconds. Several objects in this MIB module represent
|
|
values of timers used by the Spanning Tree Protocol.
|
|
In this MIB, these timers have values in units of
|
|
hundredths of a second (i.e., 1/100 secs).
|
|
|
|
These timers, when stored in a Spanning Tree Protocol's
|
|
BPDU, are in units of 1/256 seconds. Note, however, that
|
|
802.1D-1998 specifies a settable granularity of no more
|
|
than one second for these timers. To avoid ambiguity,
|
|
a conversion algorithm is defined below for converting
|
|
between the different units, which ensures a timer's
|
|
value is not distorted by multiple conversions.
|
|
|
|
To convert a Timeout value into a value in units of
|
|
1/256 seconds, the following algorithm should be used:
|
|
|
|
b = floor( (n * 256) / 100)
|
|
|
|
where:
|
|
floor = quotient [ignore remainder]
|
|
n is the value in 1/100 second units
|
|
b is the value in 1/256 second units
|
|
|
|
To convert the value from 1/256 second units back to
|
|
1/100 seconds, the following algorithm should be used:
|
|
|
|
n = ceiling( (b * 100) / 256)
|
|
|
|
where:
|
|
ceiling = quotient [if remainder is 0], or
|
|
quotient + 1 [if remainder is nonzero]
|
|
n is the value in 1/100 second units
|
|
|
|
b is the value in 1/256 second units
|
|
|
|
Note: it is important that the arithmetic operations are
|
|
done in the order specified (i.e., multiply first,
|
|
divide second)."
|
|
SYNTAX Integer32
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- subtrees in the Bridge MIB
|
|
-- ---------------------------------------------------------- --
|
|
|
|
dot1dNotifications OBJECT IDENTIFIER ::= { dot1dBridge 0 }
|
|
|
|
dot1dBase OBJECT IDENTIFIER ::= { dot1dBridge 1 }
|
|
dot1dStp OBJECT IDENTIFIER ::= { dot1dBridge 2 }
|
|
|
|
dot1dSr OBJECT IDENTIFIER ::= { dot1dBridge 3 }
|
|
-- documented in RFC 1525
|
|
|
|
dot1dTp OBJECT IDENTIFIER ::= { dot1dBridge 4 }
|
|
dot1dStatic OBJECT IDENTIFIER ::= { dot1dBridge 5 }
|
|
|
|
-- Subtrees used by Bridge MIB Extensions:
|
|
-- pBridgeMIB MODULE-IDENTITY ::= { dot1dBridge 6 }
|
|
-- qBridgeMIB MODULE-IDENTITY ::= { dot1dBridge 7 }
|
|
-- Note that the practice of registering related MIB modules
|
|
-- below dot1dBridge has been discouraged since there is no
|
|
-- robust mechanism to track such registrations.
|
|
|
|
dot1dConformance OBJECT IDENTIFIER ::= { dot1dBridge 8 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- the dot1dBase subtree
|
|
-- ---------------------------------------------------------- --
|
|
-- Implementation of the dot1dBase subtree is mandatory for all
|
|
-- bridges.
|
|
-- ---------------------------------------------------------- --
|
|
|
|
dot1dBaseBridgeAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address used by this bridge when it must be
|
|
referred to in a unique fashion. It is recommended
|
|
that this be the numerically smallest MAC address of
|
|
all ports that belong to this bridge. However, it is only
|
|
|
|
required to be unique. When concatenated with
|
|
dot1dStpPriority, a unique BridgeIdentifier is formed,
|
|
which is used in the Spanning Tree Protocol."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clauses 14.4.1.1.3 and 7.12.5"
|
|
::= { dot1dBase 1 }
|
|
|
|
dot1dBaseNumPorts OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "ports"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ports controlled by this bridging
|
|
entity."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 14.4.1.1.3"
|
|
::= { dot1dBase 2 }
|
|
|
|
dot1dBaseType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
transparent-only(2),
|
|
sourceroute-only(3),
|
|
srt(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates what type of bridging this bridge can
|
|
perform. If a bridge is actually performing a
|
|
certain type of bridging, this will be indicated by
|
|
entries in the port table for the given type."
|
|
::= { dot1dBase 3 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- The Generic Bridge Port Table
|
|
-- ---------------------------------------------------------- --
|
|
dot1dBasePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1dBasePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains generic information about every
|
|
port that is associated with this bridge. Transparent,
|
|
source-route, and srt ports are included."
|
|
::= { dot1dBase 4 }
|
|
|
|
dot1dBasePortEntry OBJECT-TYPE
|
|
SYNTAX Dot1dBasePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information for each port of the bridge."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 14.4.2, 14.6.1"
|
|
INDEX { dot1dBasePort }
|
|
::= { dot1dBasePortTable 1 }
|
|
|
|
Dot1dBasePortEntry ::=
|
|
SEQUENCE {
|
|
dot1dBasePort
|
|
Integer32,
|
|
dot1dBasePortIfIndex
|
|
InterfaceIndex,
|
|
dot1dBasePortCircuit
|
|
OBJECT IDENTIFIER,
|
|
dot1dBasePortDelayExceededDiscards
|
|
Counter32,
|
|
dot1dBasePortMtuExceededDiscards
|
|
Counter32
|
|
}
|
|
|
|
dot1dBasePort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the port for which this entry
|
|
contains bridge management information."
|
|
::= { dot1dBasePortEntry 1 }
|
|
|
|
dot1dBasePortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the instance of the ifIndex object,
|
|
defined in IF-MIB, for the interface corresponding
|
|
to this port."
|
|
::= { dot1dBasePortEntry 2 }
|
|
|
|
dot1dBasePortCircuit OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For a port that (potentially) has the same value of
|
|
dot1dBasePortIfIndex as another port on the same bridge.
|
|
This object contains the name of an object instance
|
|
unique to this port. For example, in the case where
|
|
multiple ports correspond one-to-one with multiple X.25
|
|
virtual circuits, this value might identify an (e.g.,
|
|
the first) object instance associated with the X.25
|
|
virtual circuit corresponding to this port.
|
|
|
|
For a port which has a unique value of
|
|
dot1dBasePortIfIndex, this object can have the value
|
|
{ 0 0 }."
|
|
::= { dot1dBasePortEntry 3 }
|
|
|
|
dot1dBasePortDelayExceededDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of frames discarded by this port due
|
|
to excessive transit delay through the bridge. It
|
|
is incremented by both transparent and source
|
|
route bridges."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 14.6.1.1.3"
|
|
::= { dot1dBasePortEntry 4 }
|
|
|
|
dot1dBasePortMtuExceededDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of frames discarded by this port due
|
|
to an excessive size. It is incremented by both
|
|
transparent and source route bridges."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 14.6.1.1.3"
|
|
::= { dot1dBasePortEntry 5 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- the dot1dStp subtree
|
|
-- ---------------------------------------------------------- --
|
|
-- Implementation of the dot1dStp subtree is optional. It is
|
|
-- implemented by those bridges that support the Spanning Tree
|
|
-- Protocol.
|
|
-- ---------------------------------------------------------- --
|
|
|
|
dot1dStpProtocolSpecification OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
decLb100(2),
|
|
ieee8021d(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An indication of what version of the Spanning Tree
|
|
Protocol is being run. The value 'decLb100(2)'
|
|
indicates the DEC LANbridge 100 Spanning Tree protocol.
|
|
IEEE 802.1D implementations will return 'ieee8021d(3)'.
|
|
If future versions of the IEEE Spanning Tree Protocol
|
|
that are incompatible with the current version
|
|
are released a new value will be defined."
|
|
::= { dot1dStp 1 }
|
|
|
|
dot1dStpPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the write-able portion of the Bridge ID
|
|
(i.e., the first two octets of the (8 octet long) Bridge
|
|
ID). The other (last) 6 octets of the Bridge ID are
|
|
given by the value of dot1dBaseBridgeAddress.
|
|
On bridges supporting IEEE 802.1t or IEEE 802.1w,
|
|
permissible values are 0-61440, in steps of 4096."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998 clause 8.10.2, Table 8-4,
|
|
IEEE 802.1t clause 8.10.2, Table 8-4, clause 14.3."
|
|
::= { dot1dStp 2 }
|
|
|
|
dot1dStpTimeSinceTopologyChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
UNITS "centi-seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time (in hundredths of a second) since the
|
|
last time a topology change was detected by the
|
|
bridge entity.
|
|
For RSTP, this reports the time since the tcWhile
|
|
timer for any port on this Bridge was nonzero."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998 clause 14.8.1.1.,
|
|
IEEE 802.1w clause 14.8.1.1."
|
|
::= { dot1dStp 3 }
|
|
|
|
dot1dStpTopChanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of topology changes detected by
|
|
this bridge since the management entity was last
|
|
reset or initialized."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998 clause 14.8.1.1."
|
|
::= { dot1dStp 4 }
|
|
|
|
dot1dStpDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bridge identifier of the root of the spanning
|
|
tree, as determined by the Spanning Tree Protocol,
|
|
as executed by this node. This value is used as
|
|
the Root Identifier parameter in all Configuration
|
|
Bridge PDUs originated by this node."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 8.5.3.1"
|
|
::= { dot1dStp 5 }
|
|
|
|
dot1dStpRootCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cost of the path to the root as seen from
|
|
this bridge."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 8.5.3.2"
|
|
::= { dot1dStp 6 }
|
|
|
|
dot1dStpRootPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the port that offers the lowest
|
|
cost path from this bridge to the root bridge."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 8.5.3.3"
|
|
::= { dot1dStp 7 }
|
|
|
|
dot1dStpMaxAge OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
UNITS "centi-seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum age of Spanning Tree Protocol information
|
|
learned from the network on any port before it is
|
|
discarded, in units of hundredths of a second. This is
|
|
the actual value that this bridge is currently using."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 8.5.3.4"
|
|
::= { dot1dStp 8 }
|
|
|
|
dot1dStpHelloTime OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
UNITS "centi-seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time between the transmission of
|
|
Configuration bridge PDUs by this node on any port when
|
|
it is the root of the spanning tree, or trying to become
|
|
so, in units of hundredths of a second. This is the
|
|
actual value that this bridge is currently using."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 8.5.3.5"
|
|
::= { dot1dStp 9 }
|
|
|
|
dot1dStpHoldTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "centi-seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This time value determines the interval length
|
|
during which no more than two Configuration bridge
|
|
PDUs shall be transmitted by this node, in units
|
|
of hundredths of a second."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 8.5.3.14"
|
|
::= { dot1dStp 10 }
|
|
|
|
dot1dStpForwardDelay OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
UNITS "centi-seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This time value, measured in units of hundredths of a
|
|
second, controls how fast a port changes its spanning
|
|
state when moving towards the Forwarding state. The
|
|
value determines how long the port stays in each of the
|
|
Listening and Learning states, which precede the
|
|
Forwarding state. This value is also used when a
|
|
topology change has been detected and is underway, to
|
|
age all dynamic entries in the Forwarding Database.
|
|
[Note that this value is the one that this bridge is
|
|
currently using, in contrast to
|
|
dot1dStpBridgeForwardDelay, which is the value that this
|
|
bridge and all others would start using if/when this
|
|
bridge were to become the root.]"
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 8.5.3.6"
|
|
::= { dot1dStp 11 }
|
|
|
|
dot1dStpBridgeMaxAge OBJECT-TYPE
|
|
SYNTAX Timeout (600..4000)
|
|
UNITS "centi-seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value that all bridges use for MaxAge when this
|
|
bridge is acting as the root. Note that 802.1D-1998
|
|
specifies that the range for this parameter is related
|
|
to the value of dot1dStpBridgeHelloTime. The
|
|
granularity of this timer is specified by 802.1D-1998 to
|
|
be 1 second. An agent may return a badValue error if a
|
|
set is attempted to a value that is not a whole number
|
|
of seconds."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 8.5.3.8"
|
|
::= { dot1dStp 12 }
|
|
|
|
dot1dStpBridgeHelloTime OBJECT-TYPE
|
|
SYNTAX Timeout (100..1000)
|
|
UNITS "centi-seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value that all bridges use for HelloTime when this
|
|
bridge is acting as the root. The granularity of this
|
|
timer is specified by 802.1D-1998 to be 1 second. An
|
|
agent may return a badValue error if a set is attempted
|
|
|
|
to a value that is not a whole number of seconds."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 8.5.3.9"
|
|
::= { dot1dStp 13 }
|
|
|
|
dot1dStpBridgeForwardDelay OBJECT-TYPE
|
|
SYNTAX Timeout (400..3000)
|
|
UNITS "centi-seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value that all bridges use for ForwardDelay when
|
|
this bridge is acting as the root. Note that
|
|
802.1D-1998 specifies that the range for this parameter
|
|
is related to the value of dot1dStpBridgeMaxAge. The
|
|
granularity of this timer is specified by 802.1D-1998 to
|
|
be 1 second. An agent may return a badValue error if a
|
|
set is attempted to a value that is not a whole number
|
|
of seconds."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 8.5.3.10"
|
|
::= { dot1dStp 14 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- The Spanning Tree Port Table
|
|
-- ---------------------------------------------------------- --
|
|
|
|
dot1dStpPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1dStpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains port-specific information
|
|
for the Spanning Tree Protocol."
|
|
::= { dot1dStp 15 }
|
|
|
|
dot1dStpPortEntry OBJECT-TYPE
|
|
SYNTAX Dot1dStpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information maintained by every port about
|
|
the Spanning Tree Protocol state for that port."
|
|
INDEX { dot1dStpPort }
|
|
::= { dot1dStpPortTable 1 }
|
|
|
|
Dot1dStpPortEntry ::=
|
|
SEQUENCE {
|
|
|
|
dot1dStpPort
|
|
Integer32,
|
|
dot1dStpPortPriority
|
|
Integer32,
|
|
dot1dStpPortState
|
|
INTEGER,
|
|
dot1dStpPortEnable
|
|
INTEGER,
|
|
dot1dStpPortPathCost
|
|
Integer32,
|
|
dot1dStpPortDesignatedRoot
|
|
BridgeId,
|
|
dot1dStpPortDesignatedCost
|
|
Integer32,
|
|
dot1dStpPortDesignatedBridge
|
|
BridgeId,
|
|
dot1dStpPortDesignatedPort
|
|
OCTET STRING,
|
|
dot1dStpPortForwardTransitions
|
|
Counter32,
|
|
dot1dStpPortPathCost32
|
|
Integer32
|
|
}
|
|
|
|
dot1dStpPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the port for which this entry
|
|
contains Spanning Tree Protocol management information."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 14.8.2.1.2"
|
|
::= { dot1dStpPortEntry 1 }
|
|
|
|
dot1dStpPortPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the priority field that is contained in
|
|
the first (in network byte order) octet of the (2 octet
|
|
long) Port ID. The other octet of the Port ID is given
|
|
by the value of dot1dStpPort.
|
|
On bridges supporting IEEE 802.1t or IEEE 802.1w,
|
|
permissible values are 0-240, in steps of 16."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998 clause 8.10.2, Table 8-4,
|
|
IEEE 802.1t clause 8.10.2, Table 8-4, clause 14.3."
|
|
::= { dot1dStpPortEntry 2 }
|
|
|
|
dot1dStpPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
blocking(2),
|
|
listening(3),
|
|
learning(4),
|
|
forwarding(5),
|
|
broken(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port's current state, as defined by application of
|
|
the Spanning Tree Protocol. This state controls what
|
|
action a port takes on reception of a frame. If the
|
|
bridge has detected a port that is malfunctioning, it
|
|
will place that port into the broken(6) state. For
|
|
ports that are disabled (see dot1dStpPortEnable), this
|
|
object will have a value of disabled(1)."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 8.5.5.2"
|
|
::= { dot1dStpPortEntry 3 }
|
|
|
|
dot1dStpPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enabled/disabled status of the port."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 8.5.5.2"
|
|
::= { dot1dStpPortEntry 4 }
|
|
|
|
dot1dStpPortPathCost OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The contribution of this port to the path cost of
|
|
paths towards the spanning tree root which include
|
|
this port. 802.1D-1998 recommends that the default
|
|
value of this parameter be in inverse proportion to
|
|
|
|
the speed of the attached LAN.
|
|
|
|
New implementations should support dot1dStpPortPathCost32.
|
|
If the port path costs exceeds the maximum value of this
|
|
object then this object should report the maximum value,
|
|
namely 65535. Applications should try to read the
|
|
dot1dStpPortPathCost32 object if this object reports
|
|
the maximum value."
|
|
REFERENCE "IEEE 802.1D-1998: clause 8.5.5.3"
|
|
::= { dot1dStpPortEntry 5 }
|
|
|
|
dot1dStpPortDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique Bridge Identifier of the Bridge
|
|
recorded as the Root in the Configuration BPDUs
|
|
transmitted by the Designated Bridge for the
|
|
segment to which the port is attached."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 8.5.5.4"
|
|
::= { dot1dStpPortEntry 6 }
|
|
|
|
dot1dStpPortDesignatedCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path cost of the Designated Port of the segment
|
|
connected to this port. This value is compared to the
|
|
Root Path Cost field in received bridge PDUs."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 8.5.5.5"
|
|
::= { dot1dStpPortEntry 7 }
|
|
|
|
dot1dStpPortDesignatedBridge OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Bridge Identifier of the bridge that this
|
|
port considers to be the Designated Bridge for
|
|
this port's segment."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 8.5.5.6"
|
|
::= { dot1dStpPortEntry 8 }
|
|
|
|
dot1dStpPortDesignatedPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port Identifier of the port on the Designated
|
|
Bridge for this port's segment."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 8.5.5.7"
|
|
::= { dot1dStpPortEntry 9 }
|
|
|
|
dot1dStpPortForwardTransitions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this port has transitioned
|
|
from the Learning state to the Forwarding state."
|
|
::= { dot1dStpPortEntry 10 }
|
|
|
|
dot1dStpPortPathCost32 OBJECT-TYPE
|
|
SYNTAX Integer32 (1..200000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The contribution of this port to the path cost of
|
|
paths towards the spanning tree root which include
|
|
this port. 802.1D-1998 recommends that the default
|
|
value of this parameter be in inverse proportion to
|
|
the speed of the attached LAN.
|
|
|
|
This object replaces dot1dStpPortPathCost to support
|
|
IEEE 802.1t."
|
|
REFERENCE
|
|
"IEEE 802.1t clause 8.10.2, Table 8-5."
|
|
::= { dot1dStpPortEntry 11 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- the dot1dTp subtree
|
|
-- ---------------------------------------------------------- --
|
|
-- Implementation of the dot1dTp subtree is optional. It is
|
|
-- implemented by those bridges that support the transparent
|
|
-- bridging mode. A transparent or SRT bridge will implement
|
|
-- this subtree.
|
|
-- ---------------------------------------------------------- --
|
|
|
|
dot1dTpLearnedEntryDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of Forwarding Database entries that
|
|
have been or would have been learned, but have been
|
|
discarded due to a lack of storage space in the
|
|
Forwarding Database. If this counter is increasing, it
|
|
indicates that the Forwarding Database is regularly
|
|
becoming full (a condition that has unpleasant
|
|
performance effects on the subnetwork). If this counter
|
|
has a significant value but is not presently increasing,
|
|
it indicates that the problem has been occurring but is
|
|
not persistent."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 14.7.1.1.3"
|
|
::= { dot1dTp 1 }
|
|
|
|
dot1dTpAgingTime OBJECT-TYPE
|
|
SYNTAX Integer32 (10..1000000)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timeout period in seconds for aging out
|
|
dynamically-learned forwarding information.
|
|
802.1D-1998 recommends a default of 300 seconds."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 14.7.1.1.3"
|
|
::= { dot1dTp 2 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- The Forwarding Database for Transparent Bridges
|
|
-- ---------------------------------------------------------- --
|
|
|
|
dot1dTpFdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1dTpFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about unicast
|
|
entries for which the bridge has forwarding and/or
|
|
filtering information. This information is used
|
|
by the transparent bridging function in
|
|
determining how to propagate a received frame."
|
|
::= { dot1dTp 3 }
|
|
|
|
dot1dTpFdbEntry OBJECT-TYPE
|
|
SYNTAX Dot1dTpFdbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a specific unicast MAC address
|
|
for which the bridge has some forwarding and/or
|
|
filtering information."
|
|
INDEX { dot1dTpFdbAddress }
|
|
::= { dot1dTpFdbTable 1 }
|
|
|
|
Dot1dTpFdbEntry ::=
|
|
SEQUENCE {
|
|
dot1dTpFdbAddress
|
|
MacAddress,
|
|
dot1dTpFdbPort
|
|
Integer32,
|
|
dot1dTpFdbStatus
|
|
INTEGER
|
|
}
|
|
|
|
dot1dTpFdbAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unicast MAC address for which the bridge has
|
|
forwarding and/or filtering information."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 7.9.1, 7.9.2"
|
|
::= { dot1dTpFdbEntry 1 }
|
|
|
|
dot1dTpFdbPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Either the value '0', or the port number of the port on
|
|
which a frame having a source address equal to the value
|
|
of the corresponding instance of dot1dTpFdbAddress has
|
|
been seen. A value of '0' indicates that the port
|
|
number has not been learned, but that the bridge does
|
|
have some forwarding/filtering information about this
|
|
address (e.g., in the dot1dStaticTable). Implementors
|
|
are encouraged to assign the port value to this object
|
|
whenever it is learned, even for addresses for which the
|
|
corresponding value of dot1dTpFdbStatus is not
|
|
learned(3)."
|
|
::= { dot1dTpFdbEntry 2 }
|
|
|
|
dot1dTpFdbStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
learned(3),
|
|
self(4),
|
|
mgmt(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this entry. The meanings of the
|
|
values are:
|
|
other(1) - none of the following. This would
|
|
include the case where some other MIB object
|
|
(not the corresponding instance of
|
|
dot1dTpFdbPort, nor an entry in the
|
|
dot1dStaticTable) is being used to determine if
|
|
and how frames addressed to the value of the
|
|
corresponding instance of dot1dTpFdbAddress are
|
|
being forwarded.
|
|
invalid(2) - this entry is no longer valid (e.g.,
|
|
it was learned but has since aged out), but has
|
|
not yet been flushed from the table.
|
|
learned(3) - the value of the corresponding instance
|
|
of dot1dTpFdbPort was learned, and is being
|
|
used.
|
|
self(4) - the value of the corresponding instance of
|
|
dot1dTpFdbAddress represents one of the bridge's
|
|
addresses. The corresponding instance of
|
|
dot1dTpFdbPort indicates which of the bridge's
|
|
ports has this address.
|
|
mgmt(5) - the value of the corresponding instance of
|
|
dot1dTpFdbAddress is also the value of an
|
|
existing instance of dot1dStaticAddress."
|
|
::= { dot1dTpFdbEntry 3 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- Port Table for Transparent Bridges
|
|
-- ---------------------------------------------------------- --
|
|
|
|
dot1dTpPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1dTpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about every port that
|
|
is associated with this transparent bridge."
|
|
::= { dot1dTp 4 }
|
|
|
|
dot1dTpPortEntry OBJECT-TYPE
|
|
SYNTAX Dot1dTpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information for each port of a transparent
|
|
bridge."
|
|
INDEX { dot1dTpPort }
|
|
::= { dot1dTpPortTable 1 }
|
|
|
|
Dot1dTpPortEntry ::=
|
|
SEQUENCE {
|
|
dot1dTpPort
|
|
Integer32,
|
|
dot1dTpPortMaxInfo
|
|
Integer32,
|
|
dot1dTpPortInFrames
|
|
Counter32,
|
|
dot1dTpPortOutFrames
|
|
Counter32,
|
|
dot1dTpPortInDiscards
|
|
Counter32
|
|
}
|
|
|
|
dot1dTpPort OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number of the port for which this entry
|
|
contains Transparent bridging management information."
|
|
::= { dot1dTpPortEntry 1 }
|
|
|
|
-- It would be nice if we could use ifMtu as the size of the
|
|
-- largest INFO field, but we can't because ifMtu is defined
|
|
-- to be the size that the (inter-)network layer can use, which
|
|
-- can differ from the MAC layer (especially if several layers
|
|
-- of encapsulation are used).
|
|
|
|
dot1dTpPortMaxInfo OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum size of the INFO (non-MAC) field that
|
|
|
|
this port will receive or transmit."
|
|
::= { dot1dTpPortEntry 2 }
|
|
|
|
dot1dTpPortInFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of frames that have been received by this
|
|
port from its segment. Note that a frame received on the
|
|
interface corresponding to this port is only counted by
|
|
this object if and only if it is for a protocol being
|
|
processed by the local bridging function, including
|
|
bridge management frames."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 14.6.1.1.3"
|
|
::= { dot1dTpPortEntry 3 }
|
|
|
|
dot1dTpPortOutFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of frames that have been transmitted by this
|
|
port to its segment. Note that a frame transmitted on
|
|
the interface corresponding to this port is only counted
|
|
by this object if and only if it is for a protocol being
|
|
processed by the local bridging function, including
|
|
bridge management frames."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 14.6.1.1.3"
|
|
::= { dot1dTpPortEntry 4 }
|
|
|
|
dot1dTpPortInDiscards OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of received valid frames that were discarded
|
|
(i.e., filtered) by the Forwarding Process."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 14.6.1.1.3"
|
|
::= { dot1dTpPortEntry 5 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
|
|
-- The Static (Destination-Address Filtering) Database
|
|
-- ---------------------------------------------------------- --
|
|
-- Implementation of this subtree is optional.
|
|
-- ---------------------------------------------------------- --
|
|
|
|
dot1dStaticTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1dStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing filtering information configured
|
|
into the bridge by (local or network) management
|
|
specifying the set of ports to which frames received
|
|
from specific ports and containing specific destination
|
|
addresses are allowed to be forwarded. The value of
|
|
zero in this table, as the port number from which frames
|
|
with a specific destination address are received, is
|
|
used to specify all ports for which there is no specific
|
|
entry in this table for that particular destination
|
|
address. Entries are valid for unicast and for
|
|
group/broadcast addresses."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 14.7.2"
|
|
::= { dot1dStatic 1 }
|
|
|
|
dot1dStaticEntry OBJECT-TYPE
|
|
SYNTAX Dot1dStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Filtering information configured into the bridge by
|
|
(local or network) management specifying the set of
|
|
ports to which frames received from a specific port and
|
|
containing a specific destination address are allowed to
|
|
be forwarded."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 14.7.2"
|
|
INDEX { dot1dStaticAddress, dot1dStaticReceivePort }
|
|
::= { dot1dStaticTable 1 }
|
|
|
|
Dot1dStaticEntry ::=
|
|
SEQUENCE {
|
|
dot1dStaticAddress MacAddress,
|
|
dot1dStaticReceivePort Integer32,
|
|
dot1dStaticAllowedToGoTo OCTET STRING,
|
|
dot1dStaticStatus INTEGER
|
|
}
|
|
|
|
dot1dStaticAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination MAC address in a frame to which this
|
|
entry's filtering information applies. This object can
|
|
take the value of a unicast address, a group address, or
|
|
the broadcast address."
|
|
REFERENCE
|
|
"IEEE 802.1D-1998: clause 7.9.1, 7.9.2"
|
|
::= { dot1dStaticEntry 1 }
|
|
|
|
dot1dStaticReceivePort OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Either the value '0', or the port number of the port
|
|
from which a frame must be received in order for this
|
|
entry's filtering information to apply. A value of zero
|
|
indicates that this entry applies on all ports of the
|
|
bridge for which there is no other applicable entry."
|
|
::= { dot1dStaticEntry 2 }
|
|
|
|
dot1dStaticAllowedToGoTo OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..512))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of ports to which frames received from a
|
|
specific port and destined for a specific MAC address,
|
|
are allowed to be forwarded. Each octet within the
|
|
value of this object specifies a set of eight ports,
|
|
with the first octet specifying ports 1 through 8, the
|
|
second octet specifying ports 9 through 16, etc. Within
|
|
each octet, the most significant bit represents the
|
|
lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1',
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'. (Note
|
|
that the setting of the bit corresponding to the port
|
|
from which a frame is received is irrelevant.) The
|
|
default value of this object is a string of ones of
|
|
appropriate length.
|
|
|
|
The value of this object may exceed the required minimum
|
|
maximum message size of some SNMP transport (484 bytes,
|
|
in the case of SNMP over UDP, see RFC 3417, section 3.2).
|
|
SNMP engines on bridges supporting a large number of
|
|
ports must support appropriate maximum message sizes."
|
|
::= { dot1dStaticEntry 3 }
|
|
|
|
dot1dStaticStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
invalid(2),
|
|
permanent(3),
|
|
deleteOnReset(4),
|
|
deleteOnTimeout(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry.
|
|
The default value is permanent(3).
|
|
other(1) - this entry is currently in use but the
|
|
conditions under which it will remain so are
|
|
different from each of the following values.
|
|
invalid(2) - writing this value to the object
|
|
removes the corresponding entry.
|
|
permanent(3) - this entry is currently in use and
|
|
will remain so after the next reset of the
|
|
bridge.
|
|
deleteOnReset(4) - this entry is currently in use
|
|
and will remain so until the next reset of the
|
|
bridge.
|
|
deleteOnTimeout(5) - this entry is currently in use
|
|
and will remain so until it is aged out."
|
|
::= { dot1dStaticEntry 4 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- Notifications for use by Bridges
|
|
-- ---------------------------------------------------------- --
|
|
-- Notifications for the Spanning Tree Protocol
|
|
-- ---------------------------------------------------------- --
|
|
|
|
newRoot NOTIFICATION-TYPE
|
|
-- OBJECTS { }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The newRoot trap indicates that the sending agent has
|
|
become the new root of the Spanning Tree; the trap is
|
|
sent by a bridge soon after its election as the new
|
|
|
|
root, e.g., upon expiration of the Topology Change Timer,
|
|
immediately subsequent to its election. Implementation
|
|
of this trap is optional."
|
|
::= { dot1dNotifications 1 }
|
|
|
|
topologyChange NOTIFICATION-TYPE
|
|
-- OBJECTS { }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A topologyChange trap is sent by a bridge when any of
|
|
its configured ports transitions from the Learning state
|
|
to the Forwarding state, or from the Forwarding state to
|
|
the Blocking state. The trap is not sent if a newRoot
|
|
trap is sent for the same transition. Implementation of
|
|
this trap is optional."
|
|
::= { dot1dNotifications 2 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- IEEE 802.1D MIB - Conformance Information
|
|
-- ---------------------------------------------------------- --
|
|
|
|
dot1dGroups OBJECT IDENTIFIER ::= { dot1dConformance 1 }
|
|
dot1dCompliances OBJECT IDENTIFIER ::= { dot1dConformance 2 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- units of conformance
|
|
-- ---------------------------------------------------------- --
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- the dot1dBase group
|
|
-- ---------------------------------------------------------- --
|
|
|
|
dot1dBaseBridgeGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dBaseBridgeAddress,
|
|
dot1dBaseNumPorts,
|
|
dot1dBaseType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bridge level information for this device."
|
|
::= { dot1dGroups 1 }
|
|
|
|
dot1dBasePortGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dBasePort,
|
|
dot1dBasePortIfIndex,
|
|
dot1dBasePortCircuit,
|
|
dot1dBasePortDelayExceededDiscards,
|
|
dot1dBasePortMtuExceededDiscards
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information for each port on this device."
|
|
::= { dot1dGroups 2 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- the dot1dStp group
|
|
-- ---------------------------------------------------------- --
|
|
|
|
dot1dStpBridgeGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dStpProtocolSpecification,
|
|
dot1dStpPriority,
|
|
dot1dStpTimeSinceTopologyChange,
|
|
dot1dStpTopChanges,
|
|
dot1dStpDesignatedRoot,
|
|
dot1dStpRootCost,
|
|
dot1dStpRootPort,
|
|
dot1dStpMaxAge,
|
|
dot1dStpHelloTime,
|
|
dot1dStpHoldTime,
|
|
dot1dStpForwardDelay,
|
|
dot1dStpBridgeMaxAge,
|
|
dot1dStpBridgeHelloTime,
|
|
dot1dStpBridgeForwardDelay
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bridge level Spanning Tree data for this device."
|
|
::= { dot1dGroups 3 }
|
|
|
|
dot1dStpPortGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dStpPort,
|
|
dot1dStpPortPriority,
|
|
dot1dStpPortState,
|
|
dot1dStpPortEnable,
|
|
dot1dStpPortPathCost,
|
|
dot1dStpPortDesignatedRoot,
|
|
dot1dStpPortDesignatedCost,
|
|
dot1dStpPortDesignatedBridge,
|
|
dot1dStpPortDesignatedPort,
|
|
dot1dStpPortForwardTransitions
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Spanning Tree data for each port on this device."
|
|
::= { dot1dGroups 4 }
|
|
|
|
dot1dStpPortGroup2 OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dStpPort,
|
|
dot1dStpPortPriority,
|
|
dot1dStpPortState,
|
|
dot1dStpPortEnable,
|
|
dot1dStpPortDesignatedRoot,
|
|
dot1dStpPortDesignatedCost,
|
|
dot1dStpPortDesignatedBridge,
|
|
dot1dStpPortDesignatedPort,
|
|
dot1dStpPortForwardTransitions,
|
|
dot1dStpPortPathCost32
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Spanning Tree data for each port on this device."
|
|
::= { dot1dGroups 5 }
|
|
|
|
dot1dStpPortGroup3 OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dStpPortPathCost32
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Spanning Tree data for devices supporting 32-bit
|
|
path costs."
|
|
::= { dot1dGroups 6 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- the dot1dTp group
|
|
-- ---------------------------------------------------------- --
|
|
|
|
dot1dTpBridgeGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dTpLearnedEntryDiscards,
|
|
dot1dTpAgingTime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bridge level Transparent Bridging data."
|
|
::= { dot1dGroups 7 }
|
|
|
|
dot1dTpFdbGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
|
|
dot1dTpFdbAddress,
|
|
dot1dTpFdbPort,
|
|
dot1dTpFdbStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Filtering Database information for the Bridge."
|
|
::= { dot1dGroups 8 }
|
|
|
|
dot1dTpGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dTpPort,
|
|
dot1dTpPortMaxInfo,
|
|
dot1dTpPortInFrames,
|
|
dot1dTpPortOutFrames,
|
|
dot1dTpPortInDiscards
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dynamic Filtering Database information for each port of
|
|
the Bridge."
|
|
::= { dot1dGroups 9 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- The Static (Destination-Address Filtering) Database
|
|
-- ---------------------------------------------------------- --
|
|
|
|
dot1dStaticGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dot1dStaticAddress,
|
|
dot1dStaticReceivePort,
|
|
dot1dStaticAllowedToGoTo,
|
|
dot1dStaticStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Static Filtering Database information for each port of
|
|
the Bridge."
|
|
::= { dot1dGroups 10 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- The Trap Notification Group
|
|
-- ---------------------------------------------------------- --
|
|
|
|
dot1dNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
newRoot,
|
|
topologyChange
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group of objects describing notifications (traps)."
|
|
::= { dot1dGroups 11 }
|
|
|
|
-- ---------------------------------------------------------- --
|
|
-- compliance statements
|
|
-- ---------------------------------------------------------- --
|
|
|
|
bridgeCompliance1493 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for device support of bridging
|
|
services, as per RFC1493."
|
|
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
dot1dBaseBridgeGroup,
|
|
dot1dBasePortGroup
|
|
}
|
|
|
|
GROUP dot1dStpBridgeGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for bridges
|
|
that support the Spanning Tree Protocol."
|
|
|
|
GROUP dot1dStpPortGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for bridges
|
|
that support the Spanning Tree Protocol."
|
|
|
|
GROUP dot1dTpBridgeGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for bridges
|
|
that support the transparent bridging mode. A
|
|
transparent or SRT bridge will implement this group."
|
|
|
|
GROUP dot1dTpFdbGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for bridges
|
|
that support the transparent bridging mode. A
|
|
transparent or SRT bridge will implement this group."
|
|
|
|
GROUP dot1dTpGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for bridges
|
|
|
|
that support the transparent bridging mode. A
|
|
transparent or SRT bridge will implement this group."
|
|
|
|
GROUP dot1dStaticGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is optional."
|
|
|
|
GROUP dot1dNotificationGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is optional."
|
|
::= { dot1dCompliances 1 }
|
|
|
|
bridgeCompliance4188 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for device support of bridging
|
|
services. This supports 32-bit Path Cost values and the
|
|
more restricted bridge and port priorities, as per IEEE
|
|
802.1t.
|
|
|
|
Full support for the 802.1D management objects requires that
|
|
the SNMPv2-MIB [RFC3418] objects sysDescr, and sysUpTime, as
|
|
well as the IF-MIB [RFC2863] objects ifIndex, ifType,
|
|
ifDescr, ifPhysAddress, and ifLastChange are implemented."
|
|
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
dot1dBaseBridgeGroup,
|
|
dot1dBasePortGroup
|
|
}
|
|
|
|
GROUP dot1dStpBridgeGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for
|
|
bridges that support the Spanning Tree Protocol."
|
|
|
|
OBJECT dot1dStpPriority
|
|
SYNTAX Integer32 (0|4096|8192|12288|16384|20480|24576
|
|
|28672|32768|36864|40960|45056|49152
|
|
|53248|57344|61440)
|
|
DESCRIPTION
|
|
"The possible values defined by IEEE 802.1t."
|
|
|
|
GROUP dot1dStpPortGroup2
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for
|
|
bridges that support the Spanning Tree Protocol."
|
|
|
|
GROUP dot1dStpPortGroup3
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for bridges
|
|
that support the Spanning Tree Protocol and 32-bit path
|
|
costs. In particular, this includes devices supporting
|
|
IEEE 802.1t and IEEE 802.1w."
|
|
|
|
OBJECT dot1dStpPortPriority
|
|
SYNTAX Integer32 (0|16|32|48|64|80|96|112|128
|
|
|144|160|176|192|208|224|240)
|
|
DESCRIPTION
|
|
"The possible values defined by IEEE 802.1t."
|
|
|
|
GROUP dot1dTpBridgeGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for
|
|
bridges that support the transparent bridging
|
|
mode. A transparent or SRT bridge will implement
|
|
this group."
|
|
|
|
GROUP dot1dTpFdbGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for
|
|
bridges that support the transparent bridging
|
|
mode. A transparent or SRT bridge will implement
|
|
this group."
|
|
|
|
GROUP dot1dTpGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for
|
|
bridges that support the transparent bridging
|
|
mode. A transparent or SRT bridge will implement
|
|
this group."
|
|
|
|
GROUP dot1dStaticGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is optional."
|
|
|
|
GROUP dot1dNotificationGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is optional."
|
|
::= { dot1dCompliances 2 }
|
|
|
|
END
|