mibs/MIBS/ENTITY-STATE-TC-MIB
2023-12-05 12:25:34 +01:00

179 lines
6.2 KiB
Plaintext

ENTITY-STATE-TC-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, mib-2 FROM SNMPv2-SMI
TEXTUAL-CONVENTION FROM SNMPv2-TC;
entityStateTc MODULE-IDENTITY
LAST-UPDATED "200511220000Z"
ORGANIZATION "IETF Entity MIB Working Group"
CONTACT-INFO
"General Discussion: entmib@ietf.org
To Subscribe:
http://www.ietf.org/mailman/listinfo/entmib
http://www.ietf.org/html.charters/entmib-charter.html
Sharon Chisholm
Nortel Networks
PO Box 3511 Station C
Ottawa, Ont. K1Y 4H7
Canada
schishol@nortel.com
David T. Perkins
548 Qualbrook Ct
San Jose, CA 95110
USA
Phone: 408 394-8702
dperkins@snmpinfo.com"
DESCRIPTION
"This MIB defines state textual conventions.
Copyright (C) The Internet Society 2005. This version
of this MIB module is part of RFC 4268; see the RFC
itself for full legal notices."
REVISION "200511220000Z"
DESCRIPTION
"Initial version, published as RFC 4268."
::= { mib-2 130 }
EntityAdminState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the various possible administrative states.
A value of 'locked' means the resource is administratively
prohibited from use. A value of 'shuttingDown' means that
usage is administratively limited to current instances of
use. A value of 'unlocked' means the resource is not
administratively prohibited from use. A value of
'unknown' means that this resource is unable to
report administrative state."
SYNTAX INTEGER
{
unknown (1),
locked (2),
shuttingDown (3),
unlocked (4)
}
EntityOperState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the possible values of operational states.
A value of 'disabled' means the resource is totally
inoperable. A value of 'enabled' means the resource
is partially or fully operable. A value of 'testing'
means the resource is currently being tested
and cannot therefore report whether it is operational
or not. A value of 'unknown' means that this
resource is unable to report operational state."
SYNTAX INTEGER
{
unknown (1),
disabled (2),
enabled (3),
testing (4)
}
EntityUsageState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the possible values of usage states.
A value of 'idle' means the resource is servicing no
users. A value of 'active' means the resource is
currently in use and it has sufficient spare capacity
to provide for additional users. A value of 'busy'
means the resource is currently in use, but it
currently has no spare capacity to provide for
additional users. A value of 'unknown' means
that this resource is unable to report usage state."
SYNTAX INTEGER
{
unknown (1),
idle (2),
active (3),
busy (4)
}
EntityAlarmStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the possible values of alarm status.
An Alarm [RFC3877] is a persistent indication
of an error or warning condition.
When no bits of this attribute are set, then no active
alarms are known against this entity and it is not under
repair.
When the 'value of underRepair' is set, the resource is
currently being repaired, which, depending on the
implementation, may make the other values in this bit
string not meaningful.
When the value of 'critical' is set, one or more critical
alarms are active against the resource. When the value
of 'major' is set, one or more major alarms are active
against the resource. When the value of 'minor' is set,
one or more minor alarms are active against the resource.
When the value of 'warning' is set, one or more warning
alarms are active against the resource. When the value
of 'indeterminate' is set, one or more alarms of whose
perceived severity cannot be determined are active
against this resource.
A value of 'unknown' means that this resource is
unable to report alarm state."
SYNTAX BITS
{
unknown (0),
underRepair (1),
critical(2),
major(3),
minor(4),
-- The following are not defined in X.733
warning (5),
indeterminate (6)
}
EntityStandbyStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the possible values of standby status.
A value of 'hotStandby' means the resource is not
providing service, but it will be immediately able to
take over the role of the resource to be backed up,
without the need for initialization activity, and will
contain the same information as the resource to be
backed up. A value of 'coldStandy' means that the
resource is to back up another resource, but will not
be immediately able to take over the role of a resource
to be backed up, and will require some initialization
activity. A value of 'providingService' means the
resource is providing service. A value of
'unknown' means that this resource is unable to
report standby state."
SYNTAX INTEGER
{
unknown (1),
hotStandby (2),
coldStandby (3),
providingService (4)
}
END