791 lines
26 KiB
Plaintext
791 lines
26 KiB
Plaintext
INTEGRATED-SERVICES-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Counter32,
|
|
Gauge32, Integer32, mib-2 FROM SNMPv2-SMI
|
|
TimeInterval, TEXTUAL-CONVENTION, RowStatus,
|
|
TruthValue, TestAndIncr FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
|
|
ifIndex, InterfaceIndex FROM IF-MIB;
|
|
|
|
-- This MIB module uses the extended OBJECT-TYPE macro as
|
|
-- defined in [9].
|
|
|
|
intSrv MODULE-IDENTITY
|
|
LAST-UPDATED "9511030500Z" -- Thu Aug 28 09:04:13 PDT 1997
|
|
ORGANIZATION "IETF Integrated Services Working Group"
|
|
CONTACT-INFO
|
|
" Fred Baker
|
|
Postal: Cisco Systems
|
|
519 Lado Drive
|
|
Santa Barbara, California 93111
|
|
Tel: +1 805 681 0115
|
|
E-Mail: fred@cisco.com
|
|
|
|
John Krawczyk
|
|
Postal: ArrowPoint Communications
|
|
235 Littleton Road
|
|
Westford, Massachusetts 01886
|
|
Tel: +1 508 692 5875
|
|
E-Mail: jjk@tiac.net"
|
|
DESCRIPTION
|
|
"The MIB module to describe the Integrated Services
|
|
Protocol"
|
|
::= { mib-2 52 }
|
|
|
|
intSrvObjects OBJECT IDENTIFIER ::= { intSrv 1 }
|
|
intSrvGenObjects OBJECT IDENTIFIER ::= { intSrv 2 }
|
|
intSrvNotifications OBJECT IDENTIFIER ::= { intSrv 3 }
|
|
intSrvConformance OBJECT IDENTIFIER ::= { intSrv 4 }
|
|
|
|
-- Textual Conventions
|
|
--
|
|
|
|
SessionNumber ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Session Number convention is used for
|
|
numbers identifying sessions or saved PATH or
|
|
RESV information. It is a number in the range
|
|
returned by a TestAndIncr variable, having no
|
|
protocol meaning whatsoever but serving instead
|
|
as simple identifier.
|
|
|
|
The alternative was a very complex instance or
|
|
instance object that became unwieldy."
|
|
SYNTAX INTEGER (0..2147483647)
|
|
|
|
|
|
Protocol ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the IP Protocol field of an IP
|
|
Datagram Header. This identifies the protocol
|
|
layer above IP. For example, the value 6 is
|
|
used for TCP and the value 17 is used for UDP.
|
|
The values of this field are defined in the As-
|
|
signed Numbers RFC."
|
|
SYNTAX INTEGER (1..255)
|
|
|
|
|
|
SessionType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the C-Type field of a Session ob-
|
|
ject, as defined in the RSVP specification.
|
|
This value determines the lengths of octet
|
|
strings and use of certain objects such as the
|
|
'port' variables. If the C-Type calls for an
|
|
IP6 address, one would expect all source, des-
|
|
tination, and next/previous hop addresses to be
|
|
16 bytes long, and for the ports to be UDP/TCP
|
|
port numbers, for example."
|
|
SYNTAX INTEGER (1..255)
|
|
|
|
Port ::= TEXTUAL-CONVENTION
|
|
-- DISPLAY-HINT "d" ---- illegal for OCTET STRING.
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the UDP or TCP Source or Destina-
|
|
tion Port field, a virtual destination port or
|
|
generalized port identifier used with the IPSEC
|
|
Authentication Header or Encapsulating Security
|
|
Payload, or other session discriminator. If it
|
|
is not used, the value should be of length 0.
|
|
This pair, when coupled with the IP Addresses
|
|
of the source and destination system and the IP
|
|
protocol field, uniquely identifies a data
|
|
stream."
|
|
SYNTAX OCTET STRING (SIZE(2..4))
|
|
|
|
|
|
MessageSize ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of a message in bytes. This is used
|
|
to specify the minimum and maximum size of a
|
|
message along an integrated services route."
|
|
SYNTAX INTEGER (0..'7FFFFFFF'h)
|
|
|
|
|
|
BitRate ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rate, in bits/second, that data may move
|
|
in the context. Applicable contexts minimally
|
|
include the speed of an interface or virtual
|
|
circuit, the data rate of a (potentially aggre-
|
|
gated) data flow, or the data rate to be allo-
|
|
cated for use by a flow."
|
|
SYNTAX INTEGER (0..'7FFFFFFF'h)
|
|
|
|
BurstSize ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of octets of IP Data, including IP
|
|
Headers, that a stream may send without concern
|
|
for policing."
|
|
SYNTAX INTEGER (0..'7FFFFFFF'h)
|
|
|
|
|
|
QosService ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The class of service in use by a flow."
|
|
SYNTAX INTEGER {
|
|
bestEffort (1), -- Best Effort Service
|
|
guaranteedDelay (2), -- Guaranteed Delay
|
|
controlledLoad (5) -- Controlled Load
|
|
}
|
|
|
|
-- The Integrated Services Interface Attributes Database contains
|
|
-- information about resources allocated by resource reservation
|
|
-- protocols, such as RSVP and ST-II.
|
|
|
|
|
|
intSrvIfAttribTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IntSrvIfAttribEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reservable attributes of the system's in-
|
|
terfaces."
|
|
::= { intSrvObjects 1 }
|
|
|
|
|
|
intSrvIfAttribEntry OBJECT-TYPE
|
|
SYNTAX IntSrvIfAttribEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reservable attributes of a given inter-
|
|
face."
|
|
INDEX { ifIndex }
|
|
::= { intSrvIfAttribTable 1 }
|
|
|
|
IntSrvIfAttribEntry ::=
|
|
SEQUENCE {
|
|
intSrvIfAttribAllocatedBits BitRate,
|
|
intSrvIfAttribMaxAllocatedBits BitRate,
|
|
intSrvIfAttribAllocatedBuffer BurstSize,
|
|
intSrvIfAttribFlows Gauge32,
|
|
intSrvIfAttribPropagationDelay Integer32,
|
|
intSrvIfAttribStatus RowStatus
|
|
}
|
|
|
|
intSrvIfAttribAllocatedBits OBJECT-TYPE
|
|
SYNTAX BitRate
|
|
UNITS "Bits per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bits/second currently allocated
|
|
to reserved sessions on the interface."
|
|
::= { intSrvIfAttribEntry 1 }
|
|
|
|
intSrvIfAttribMaxAllocatedBits OBJECT-TYPE
|
|
SYNTAX BitRate
|
|
UNITS "Bits per second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of bits/second that may be
|
|
allocated to reserved sessions on the inter-
|
|
face."
|
|
::= { intSrvIfAttribEntry 2 }
|
|
|
|
|
|
intSrvIfAttribAllocatedBuffer OBJECT-TYPE
|
|
SYNTAX BurstSize
|
|
UNITS "Bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of buffer space required to hold
|
|
the simultaneous burst of all reserved flows on
|
|
the interface."
|
|
::= { intSrvIfAttribEntry 3 }
|
|
|
|
|
|
intSrvIfAttribFlows OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of reserved flows currently active
|
|
on this interface. A flow can be created ei-
|
|
ther from a reservation protocol (such as RSVP
|
|
or ST-II) or via configuration information."
|
|
::= { intSrvIfAttribEntry 4 }
|
|
|
|
intSrvIfAttribPropagationDelay OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of propagation delay that this in-
|
|
terface introduces in addition to that intro-
|
|
diced by bit propagation delays."
|
|
DEFVAL { 0 }-- by default, interfaces are presumed to add
|
|
-- no extra delays
|
|
::= { intSrvIfAttribEntry 5 }
|
|
|
|
|
|
intSrvIfAttribStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"'active' on interfaces that are configured for
|
|
RSVP."
|
|
::= { intSrvIfAttribEntry 6 }
|
|
|
|
|
|
-- The Integrated Services Active Flows Database
|
|
-- lists all flows active on an outgoing interface, including
|
|
-- relevant attributes.
|
|
|
|
|
|
intSrvFlowTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IntSrvFlowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the reserved flows us-
|
|
ing the system's interfaces."
|
|
::= { intSrvObjects 2 }
|
|
|
|
|
|
intSrvFlowEntry OBJECT-TYPE
|
|
SYNTAX IntSrvFlowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information describing the use of a given in-
|
|
terface by a given flow. The counter
|
|
intSrvFlowPoliced starts counting at the in-
|
|
stallation of the flow."
|
|
INDEX { intSrvFlowNumber }
|
|
::= { intSrvFlowTable 1 }
|
|
|
|
|
|
IntSrvFlowEntry ::=
|
|
SEQUENCE {
|
|
intSrvFlowNumber SessionNumber,
|
|
intSrvFlowType SessionType,
|
|
intSrvFlowOwner INTEGER,
|
|
intSrvFlowDestAddr OCTET STRING,
|
|
intSrvFlowSenderAddr OCTET STRING,
|
|
intSrvFlowDestAddrLength INTEGER,
|
|
intSrvFlowSenderAddrLength INTEGER,
|
|
intSrvFlowProtocol Protocol,
|
|
intSrvFlowDestPort Port,
|
|
intSrvFlowPort Port,
|
|
intSrvFlowFlowId INTEGER,
|
|
intSrvFlowInterface InterfaceIndex,
|
|
intSrvFlowIfAddr OCTET STRING,
|
|
intSrvFlowRate BitRate,
|
|
intSrvFlowBurst BurstSize,
|
|
intSrvFlowWeight Integer32,
|
|
intSrvFlowQueue Integer32,
|
|
intSrvFlowMinTU MessageSize,
|
|
intSrvFlowMaxTU MessageSize,
|
|
intSrvFlowBestEffort Counter32,
|
|
intSrvFlowPoliced Counter32,
|
|
intSrvFlowDiscard TruthValue,
|
|
intSrvFlowService QosService,
|
|
intSrvFlowOrder INTEGER,
|
|
intSrvFlowStatus RowStatus
|
|
}
|
|
|
|
|
|
intSrvFlowNumber OBJECT-TYPE
|
|
SYNTAX SessionNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of this flow. This is for SNMP In-
|
|
dexing purposes only and has no relation to any
|
|
protocol value."
|
|
::= { intSrvFlowEntry 1 }
|
|
|
|
|
|
intSrvFlowType OBJECT-TYPE
|
|
SYNTAX SessionType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of session (IP4, IP6, IP6 with flow
|
|
information, etc)."
|
|
::= { intSrvFlowEntry 2 }
|
|
|
|
|
|
intSrvFlowOwner OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
rsvp(2),
|
|
management(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The process that installed this flow in the
|
|
queue policy database."
|
|
::= { intSrvFlowEntry 3 }
|
|
|
|
|
|
intSrvFlowDestAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address used by all senders in
|
|
this session. This object may not be changed
|
|
when the value of the RowStatus object is 'ac-
|
|
tive'."
|
|
::= { intSrvFlowEntry 4 }
|
|
|
|
|
|
intSrvFlowSenderAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source address of the sender selected by
|
|
this reservation. The value of all zeroes in-
|
|
dicates 'all senders'. This object may not be
|
|
changed when the value of the RowStatus object
|
|
is 'active'."
|
|
::= { intSrvFlowEntry 5 }
|
|
|
|
|
|
intSrvFlowDestAddrLength OBJECT-TYPE
|
|
SYNTAX INTEGER(0..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of the destination address in bits.
|
|
This is the CIDR Prefix Length, which for IP4
|
|
hosts and multicast addresses is 32 bits. This
|
|
object may not be changed when the value of the
|
|
RowStatus object is 'active'."
|
|
::= { intSrvFlowEntry 6 }
|
|
|
|
|
|
intSrvFlowSenderAddrLength OBJECT-TYPE
|
|
SYNTAX INTEGER(0..128)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of the sender's address in bits.
|
|
This is the CIDR Prefix Length, which for IP4
|
|
hosts and multicast addresses is 32 bits. This
|
|
object may not be changed when the value of the
|
|
RowStatus object is 'active'."
|
|
::= { intSrvFlowEntry 7 }
|
|
|
|
|
|
intSrvFlowProtocol OBJECT-TYPE
|
|
SYNTAX Protocol
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Protocol used by a session. This ob-
|
|
ject may not be changed when the value of the
|
|
RowStatus object is 'active'."
|
|
::= { intSrvFlowEntry 8 }
|
|
|
|
|
|
intSrvFlowDestPort OBJECT-TYPE
|
|
SYNTAX Port
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UDP or TCP port number used as a destina-
|
|
tion port for all senders in this session. If
|
|
the IP protocol in use, specified by
|
|
intSrvResvFwdProtocol, is 50 (ESP) or 51 (AH),
|
|
this represents a virtual destination port
|
|
number. A value of zero indicates that the IP
|
|
protocol in use does not have ports. This ob-
|
|
ject may not be changed when the value of the
|
|
RowStatus object is 'active'."
|
|
::= { intSrvFlowEntry 9 }
|
|
|
|
|
|
intSrvFlowPort OBJECT-TYPE
|
|
SYNTAX Port
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UDP or TCP port number used as a source
|
|
port for this sender in this session. If the
|
|
IP protocol in use, specified by
|
|
intSrvResvFwdProtocol is 50 (ESP) or 51 (AH),
|
|
this represents a generalized port identifier
|
|
(GPI). A value of zero indicates that the IP
|
|
protocol in use does not have ports. This ob-
|
|
ject may not be changed when the value of the
|
|
RowStatus object is 'active'."
|
|
::= { intSrvFlowEntry 10 }
|
|
|
|
|
|
intSrvFlowFlowId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flow ID that this sender is using, if
|
|
this is an IPv6 session."
|
|
::= { intSrvFlowEntry 11 }
|
|
|
|
|
|
intSrvFlowInterface OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the interface on which
|
|
this reservation exists."
|
|
::= { intSrvFlowEntry 12 }
|
|
|
|
|
|
intSrvFlowIfAddr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address on the ifEntry on which this
|
|
reservation exists. This is present primarily
|
|
to support those interfaces which layer multi-
|
|
ple IP Addresses on the interface."
|
|
::= { intSrvFlowEntry 13 }
|
|
|
|
|
|
intSrvFlowRate OBJECT-TYPE
|
|
SYNTAX BitRate
|
|
UNITS "bits per second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Reserved Rate of the sender's data stream.
|
|
If this is a Controlled Load service flow, this
|
|
rate is derived from the Tspec rate parameter
|
|
(r). If this is a Guaranteed service flow,
|
|
this rate is derived from the Rspec clearing
|
|
rate parameter (R)."
|
|
::= { intSrvFlowEntry 14 }
|
|
|
|
|
|
intSrvFlowBurst OBJECT-TYPE
|
|
SYNTAX BurstSize
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of the largest burst expected from
|
|
the sender at a time.
|
|
|
|
If this is less than the sender's advertised
|
|
burst size, the receiver is asking the network
|
|
to provide flow pacing beyond what would be
|
|
provided under normal circumstances. Such pac-
|
|
ing is at the network's option."
|
|
::= { intSrvFlowEntry 15 }
|
|
|
|
|
|
intSrvFlowWeight OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The weight used to prioritize the traffic.
|
|
Note that the interpretation of this object is
|
|
implementation-specific, as implementations
|
|
vary in their use of weighting procedures."
|
|
::= { intSrvFlowEntry 16 }
|
|
|
|
intSrvFlowQueue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of the queue used by this traffic.
|
|
Note that the interpretation of this object is
|
|
implementation-specific, as implementations
|
|
vary in their use of queue identifiers."
|
|
::= { intSrvFlowEntry 17 }
|
|
|
|
|
|
intSrvFlowMinTU OBJECT-TYPE
|
|
SYNTAX MessageSize
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum message size for this flow. The
|
|
policing algorithm will treat smaller messages
|
|
as though they are this size."
|
|
::= { intSrvFlowEntry 18 }
|
|
|
|
|
|
intSrvFlowMaxTU OBJECT-TYPE
|
|
SYNTAX MessageSize
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum datagram size for this flow that
|
|
will conform to the traffic specification. This
|
|
value cannot exceed the MTU of the interface."
|
|
::= { intSrvFlowEntry 19 }
|
|
|
|
|
|
intSrvFlowBestEffort OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets that were remanded to
|
|
best effort service."
|
|
::= { intSrvFlowEntry 20 }
|
|
|
|
|
|
intSrvFlowPoliced OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets policed since the incep-
|
|
tion of the flow's service."
|
|
::= { intSrvFlowEntry 21 }
|
|
|
|
|
|
intSrvFlowDiscard OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If 'true', the flow is to incur loss when
|
|
traffic is policed. If 'false', policed traff-
|
|
ic is treated as best effort traffic."
|
|
DEFVAL { false } -- traffic is, by default, treated as best
|
|
-- effort
|
|
::= { intSrvFlowEntry 22 }
|
|
|
|
|
|
intSrvFlowService OBJECT-TYPE
|
|
SYNTAX QosService
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The QoS service being applied to this flow."
|
|
::= { intSrvFlowEntry 23 }
|
|
|
|
|
|
intSrvFlowOrder OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In the event of ambiguity, the order in which
|
|
the classifier should make its comparisons.
|
|
The row with intSrvFlowOrder=0 is tried first,
|
|
and comparisons proceed in the order of in-
|
|
creasing value. Non-serial implementations of
|
|
the classifier should emulate this behavior."
|
|
::= { intSrvFlowEntry 24 }
|
|
|
|
|
|
intSrvFlowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"'active' for all active flows. This object
|
|
may be used to install static classifier infor-
|
|
mation, delete classifier information, or au-
|
|
thorize such."
|
|
::= { intSrvFlowEntry 25 }
|
|
|
|
|
|
intSrvFlowNewIndex OBJECT-TYPE
|
|
SYNTAX TestAndIncr
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to assign values to
|
|
intSrvFlowNumber as described in 'Textual Con-
|
|
ventions for SNMPv2'. The network manager
|
|
reads the object, and then writes the value
|
|
back in the SET that creates a new instance of
|
|
intSrvFlowEntry. If the SET fails with the
|
|
code 'inconsistentValue', then the process must
|
|
be repeated; If the SET succeeds, then the ob-
|
|
ject is incremented, and the new instance is
|
|
created according to the manager's directions."
|
|
::= { intSrvGenObjects 1 }
|
|
|
|
|
|
-- conformance information
|
|
|
|
|
|
intSrvGroups OBJECT IDENTIFIER ::= { intSrvConformance 1 }
|
|
intSrvCompliances OBJECT IDENTIFIER ::= { intSrvConformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
|
|
intSrvCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement "
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { intSrvIfAttribGroup, intSrvFlowsGroup }
|
|
|
|
OBJECT intSrvFlowType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"read-create access is not required. This may be
|
|
read-only."
|
|
|
|
OBJECT intSrvFlowOwner
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"read-create access is not required. This may be
|
|
read-only."
|
|
|
|
OBJECT intSrvFlowDestAddr
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"read-create access is not required. This may be
|
|
read-only."
|
|
|
|
OBJECT intSrvFlowSenderAddr
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"read-create access is not required. This may be
|
|
read-only."
|
|
|
|
OBJECT intSrvFlowDestAddrLength
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"read-create access is not required. This may be
|
|
read-only."
|
|
|
|
OBJECT intSrvFlowSenderAddrLength
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"read-create access is not required. This may be
|
|
read-only."
|
|
|
|
OBJECT intSrvFlowProtocol
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"read-create access is not required. This may be
|
|
read-only."
|
|
|
|
OBJECT intSrvFlowDestPort
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"read-create access is not required. This may be
|
|
read-only."
|
|
|
|
OBJECT intSrvFlowPort
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"read-create access is not required. This may be
|
|
read-only."
|
|
|
|
OBJECT intSrvFlowFlowId
|
|
MIN-ACCESS not-accessible
|
|
DESCRIPTION
|
|
"This object is needed only in a system that imple-
|
|
ments IPv6."
|
|
|
|
OBJECT intSrvFlowInterface
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"read-create access is not required. This may be
|
|
read-only."
|
|
|
|
OBJECT intSrvFlowRate
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"read-create access is not required. This may be
|
|
read-only."
|
|
|
|
OBJECT intSrvFlowBurst
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"read-create access is not required. This may be
|
|
read-only."
|
|
|
|
OBJECT intSrvFlowWeight
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"read-create access is not required. This may be
|
|
read-only."
|
|
|
|
OBJECT intSrvFlowQueue
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"read-create access is not required. This may be
|
|
read-only."
|
|
|
|
OBJECT intSrvFlowMinTU
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"read-create access is not required. This may be
|
|
read-only."
|
|
|
|
OBJECT intSrvFlowMaxTU
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"read-create access is not required. This may be
|
|
read-only."
|
|
|
|
OBJECT intSrvFlowStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"read-create access is not required. This may be
|
|
read-only."
|
|
|
|
::= { intSrvCompliances 1 }
|
|
|
|
|
|
intSrvIfAttribGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
intSrvIfAttribAllocatedBits, intSrvIfAttribMaxAllocatedBits,
|
|
intSrvIfAttribAllocatedBuffer, intSrvIfAttribFlows,
|
|
intSrvIfAttribPropagationDelay, intSrvIfAttribStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These objects are required for Systems sup-
|
|
porting the Integrated Services Architecture."
|
|
::= { intSrvGroups 1 }
|
|
|
|
intSrvFlowsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
intSrvFlowType, intSrvFlowOwner, intSrvFlowDestAddr,
|
|
intSrvFlowSenderAddr, intSrvFlowDestAddrLength,
|
|
intSrvFlowSenderAddrLength, intSrvFlowProtocol,
|
|
intSrvFlowDestPort, intSrvFlowPort, intSrvFlowInterface,
|
|
intSrvFlowBestEffort, intSrvFlowRate, intSrvFlowBurst,
|
|
intSrvFlowWeight, intSrvFlowQueue, intSrvFlowMinTU,
|
|
intSrvFlowDiscard, intSrvFlowPoliced, intSrvFlowService,
|
|
intSrvFlowIfAddr, intSrvFlowOrder, intSrvFlowStatus,
|
|
intSrvFlowFlowId, intSrvFlowMaxTU
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These objects are required for Systems sup-
|
|
porting the Integrated Services Architecture."
|
|
::= { intSrvGroups 2 }
|
|
|
|
END
|