1264 lines
45 KiB
Plaintext
1264 lines
45 KiB
Plaintext
-- *****************************************************************
|
|
-- RFC2127-MIB.my: ISDN MIB file
|
|
--
|
|
-- April 1998, Viet Nguyen
|
|
--
|
|
-- Copyright (c) 1998 by cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- *****************************************************************
|
|
--
|
|
-- This mib was extracted from RFC 2127
|
|
|
|
|
|
ISDN-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
NOTIFICATION-TYPE,
|
|
OBJECT-TYPE,
|
|
Counter32,
|
|
Gauge32,
|
|
Integer32
|
|
FROM SNMPv2-SMI
|
|
DisplayString,
|
|
TruthValue,
|
|
TimeStamp,
|
|
RowStatus,
|
|
TestAndIncr,
|
|
TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
-- NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
ifIndex,
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
IANAifType
|
|
FROM IANAifType-MIB
|
|
transmission
|
|
FROM RFC1213-MIB;
|
|
|
|
isdnMib MODULE-IDENTITY
|
|
LAST-UPDATED "9609231642Z" -- Sep 23, 1996
|
|
ORGANIZATION "IETF ISDN MIB Working Group"
|
|
CONTACT-INFO
|
|
" Guenter Roeck
|
|
Postal: cisco Systems
|
|
170 West Tasman Drive
|
|
San Jose, CA 95134
|
|
U.S.A.
|
|
Phone: +1 408 527 3143
|
|
E-mail: groeck@cisco.com"
|
|
DESCRIPTION
|
|
"The MIB module to describe the
|
|
management of ISDN interfaces."
|
|
::= { transmission 20 }
|
|
|
|
-- The ISDN hardware interface (BRI or PRI) is represented
|
|
-- by a media specific ifEntry.
|
|
--
|
|
-- For basic rate lines, the media specifics for the physical interface
|
|
-- is defined in the physical interface group of the ISDN MIB.
|
|
-- The ifType for physical basic rate interfaces is isdns(75)
|
|
-- or isdnu(76), whichever is appropriate.
|
|
--
|
|
-- For primary rate, the media specifics are defined in the Trunk
|
|
-- MIB and the ifType has a value of ds1(18).
|
|
|
|
-- Each signaling channel is represented by an entry
|
|
-- in the isdnSignalingTable.
|
|
-- The signaling channel has an ifType value of isdn(63).
|
|
-- Each B channel is also represented as an entry
|
|
-- in the ifTable. The B channels have an ifType value
|
|
-- of ds0(81).
|
|
-- This model is used while defining objects and tables
|
|
-- for management.
|
|
-- The ISDN MIB allows sub-layers. For example, the data transfer
|
|
-- over a B channel may take place with PPP encapsulation. While the
|
|
-- ISDN MIB describes the D and B channels, a media specific MIB
|
|
-- for PPP can be used on a layered basis. This is as per
|
|
-- the interfaces MIB.
|
|
|
|
-- Textual conventions
|
|
|
|
IsdnSignalingProtocol ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This data type is used as the syntax of the
|
|
isdnSignalingProtocol object in the
|
|
definition of ISDN-MIB's isdnSignalingTable.
|
|
|
|
The definition of this textual convention with the
|
|
addition of newly assigned values is published
|
|
periodically by the IANA, in either the Assigned
|
|
Numbers RFC, or some derivative of it specific to
|
|
Internet Network Management number assignments. (The
|
|
latest arrangements can be obtained by contacting the
|
|
IANA.)
|
|
|
|
Requests for new values should be made to IANA via
|
|
email (iana@iana.org)."
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
dss1(2), -- ITU DSS1 (formerly CCITT) Q.931
|
|
etsi(3), -- Europe / ETSI ETS300-102
|
|
-- plus supplementary services
|
|
-- (ETSI 300-xxx)
|
|
-- note that NET3, NET5 define
|
|
-- test procedures for ETS300-102
|
|
-- and have been replaced by
|
|
-- I-CTR 3 and I-CTR 4.
|
|
dass2(4), -- U.K. / DASS2 (PRI)
|
|
ess4(5), -- U.S.A. / AT&T 4ESS
|
|
ess5(6), -- U.S.A. / AT&T 5ESS
|
|
dms100(7), -- U.S.A. / Northern Telecom DMS100
|
|
dms250(8), -- U.S.A. / Northern Telecom DMS250
|
|
ni1(9), -- U.S.A. / National ISDN 1 (BRI)
|
|
ni2(10), -- U.S.A. / National ISDN 2 (BRI, PRI)
|
|
ni3(11), -- U.S.A. / next one
|
|
vn2(12), -- France / VN2
|
|
vn3(13), -- France / VN3
|
|
vn4(14), -- France / VN4 (ETSI with changes)
|
|
vn6(15), -- France / VN6 (ETSI with changes)
|
|
-- delta document CSE P 10-21 A
|
|
-- test document CSE P 10-20 A
|
|
kdd(16), -- Japan / KDD
|
|
ins64(17), -- Japan / NTT INS64
|
|
ins1500(18), -- Japan / NTT INS1500
|
|
itr6(19), -- Germany/ 1TR6 (BRI, PRI)
|
|
cornet(20), -- Germany/ Siemens HiCom CORNET
|
|
ts013(21), -- Australia / TS013
|
|
-- (formerly TPH 1962, BRI)
|
|
ts014(22), -- Australia / TS014
|
|
-- (formerly TPH 1856, PRI)
|
|
qsig(23), -- Q.SIG
|
|
swissnet2(24), -- SwissNet-2
|
|
swissnet3(25) -- SwissNet-3
|
|
}
|
|
|
|
-- Isdn Mib objects definitions
|
|
|
|
isdnMibObjects OBJECT IDENTIFIER ::= { isdnMib 1 }
|
|
|
|
-- ISDN physical interface group
|
|
|
|
-- This group describes physical basic rate interfaces.
|
|
|
|
isdnBasicRateGroup OBJECT IDENTIFIER ::= { isdnMibObjects 1 }
|
|
|
|
isdnBasicRateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsdnBasicRateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing configuration and operational
|
|
parameters for all physical Basic Rate
|
|
interfaces on this managed device."
|
|
::= { isdnBasicRateGroup 1 }
|
|
|
|
isdnBasicRateEntry OBJECT-TYPE
|
|
SYNTAX IsdnBasicRateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the ISDN Basic Rate Table."
|
|
INDEX { ifIndex }
|
|
::= { isdnBasicRateTable 1 }
|
|
|
|
IsdnBasicRateEntry ::= SEQUENCE {
|
|
isdnBasicRateIfType INTEGER,
|
|
isdnBasicRateLineTopology INTEGER,
|
|
isdnBasicRateIfMode INTEGER,
|
|
isdnBasicRateSignalMode INTEGER
|
|
}
|
|
|
|
isdnBasicRateIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
isdns(75),
|
|
isdnu(76)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The physical interface type. For 'S/T' interfaces,
|
|
also called 'Four-wire Basic Access Interface',
|
|
the value of this object is isdns(75).
|
|
For 'U' interfaces, also called 'Two-wire Basic
|
|
Access Interface', the value of this object is
|
|
isdnu(76)."
|
|
::= { isdnBasicRateEntry 1 }
|
|
|
|
isdnBasicRateLineTopology OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pointToPoint(1),
|
|
pointToMultipoint(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The line topology to be used for this interface.
|
|
Note that setting isdnBasicRateIfType to isdns(75)
|
|
does not necessarily mean a line topology of
|
|
point-to-multipoint."
|
|
::= { isdnBasicRateEntry 2 }
|
|
|
|
isdnBasicRateIfMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
te(1),
|
|
nt(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The physical interface mode. For TE mode, the value
|
|
of this object is te(1). For NT mode, the value
|
|
of this object is nt(2)."
|
|
::= { isdnBasicRateEntry 3 }
|
|
|
|
isdnBasicRateSignalMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
inactive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The signaling channel operational mode for this interface.
|
|
If active(1) there is a signaling channel on this
|
|
interface. If inactive(2) a signaling channel is
|
|
not available."
|
|
::= { isdnBasicRateEntry 4 }
|
|
|
|
-- The B channel (bearer channel) group
|
|
|
|
-- Note that disconnects can explicitely be handled using the
|
|
-- ifStack table. If a connection is to be disconnected,
|
|
-- the according ifStack entry has to be removed.
|
|
-- More specifically, the ifStackTable entry which binds the high-layer
|
|
-- ifTable entry (and related dialCtlNbrCfgTable entry) to the
|
|
-- B channel ifTable entry (and related isdnBearerTable entry)
|
|
-- during an active call has to be removed.
|
|
|
|
isdnBearerGroup OBJECT IDENTIFIER ::= { isdnMibObjects 2 }
|
|
|
|
isdnBearerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsdnBearerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table defines port specific operational, statistics
|
|
and active call data for ISDN B channels. Each entry
|
|
in this table describes one B (bearer) channel."
|
|
::= { isdnBearerGroup 1 }
|
|
|
|
isdnBearerEntry OBJECT-TYPE
|
|
SYNTAX IsdnBearerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operational and statistics information relating to
|
|
one port. A port is a single B channel."
|
|
INDEX { ifIndex }
|
|
::= { isdnBearerTable 1 }
|
|
|
|
IsdnBearerEntry ::=
|
|
SEQUENCE {
|
|
isdnBearerChannelType INTEGER,
|
|
isdnBearerOperStatus INTEGER,
|
|
isdnBearerChannelNumber INTEGER,
|
|
isdnBearerPeerAddress DisplayString,
|
|
isdnBearerPeerSubAddress DisplayString,
|
|
isdnBearerCallOrigin INTEGER,
|
|
isdnBearerInfoType INTEGER,
|
|
isdnBearerMultirate TruthValue,
|
|
isdnBearerCallSetupTime TimeStamp,
|
|
isdnBearerCallConnectTime TimeStamp,
|
|
isdnBearerChargedUnits Gauge32
|
|
}
|
|
|
|
isdnBearerChannelType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dialup(1),
|
|
leased(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The B channel type. If the B channel is connected
|
|
to a dialup line, this object has a value of
|
|
dialup(1). In this case, it is controlled by
|
|
an associated signaling channel. If the B channel
|
|
is connected to a leased line, this object has
|
|
a value of leased(2). For leased line B channels, there
|
|
is no signaling channel control available."
|
|
::= { isdnBearerEntry 1 }
|
|
|
|
isdnBearerOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
idle(1),
|
|
connecting(2),
|
|
connected(3),
|
|
active(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current call control state for this port.
|
|
idle(1): The B channel is idle.
|
|
No call or call attempt is going on.
|
|
connecting(2): A connection attempt (outgoing call)
|
|
is being made on this interface.
|
|
connected(3): An incoming call is in the process
|
|
of validation.
|
|
active(4): A call is active on this interface."
|
|
::= { isdnBearerEntry 2 }
|
|
|
|
isdnBearerChannelNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..30)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identifier being used by a signaling protocol
|
|
to identify this B channel, also referred to as
|
|
B channel number. If the Agent also supports the DS0 MIB,
|
|
the values of isdnBearerChannelNumber and dsx0Ds0Number
|
|
must be identical for a given B channel."
|
|
::= { isdnBearerEntry 3 }
|
|
|
|
isdnBearerPeerAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ISDN address the current or last call is or was
|
|
connected to.
|
|
|
|
In some cases, the format of this information can not
|
|
be predicted, since it largely depends on the type
|
|
of switch or PBX the device is connected to. Therefore,
|
|
the detailed format of this information is not
|
|
specified and is implementation dependent.
|
|
|
|
If possible, the agent should supply this information
|
|
using the E.164 format. In this case, the number must
|
|
start with '+'. Otherwise, IA5 number digits must be used.
|
|
|
|
If the peer ISDN address is not available,
|
|
this object has a length of zero."
|
|
REFERENCE
|
|
"ITU-T E.164, Q.931 chapter 4.5.10"
|
|
::= { isdnBearerEntry 4 }
|
|
|
|
isdnBearerPeerSubAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ISDN subaddress the current or last call is or was
|
|
connected to.
|
|
|
|
The subaddress is an user supplied string of up to 20
|
|
IA5 characters and is transmitted transparently through
|
|
the network.
|
|
|
|
If the peer subaddress is not available, this object
|
|
has a length of zero."
|
|
REFERENCE
|
|
"ITU-T I.330, Q.931 chapter 4.5.11"
|
|
::= { isdnBearerEntry 5 }
|
|
|
|
isdnBearerCallOrigin OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
originate(2),
|
|
answer(3),
|
|
callback(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The call origin for the current or last call. If since
|
|
system startup there was no call on this interface,
|
|
this object has a value of unknown(1)."
|
|
::= { isdnBearerEntry 6 }
|
|
|
|
isdnBearerInfoType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
speech(2),
|
|
unrestrictedDigital(3), -- as defined in Q.931
|
|
unrestrictedDigital56(4), -- with 56k rate adaption
|
|
restrictedDigital(5),
|
|
audio31(6), -- 3.1 kHz audio
|
|
audio7(7), -- 7 kHz audio
|
|
video(8),
|
|
packetSwitched(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Information Transfer Capability for the current
|
|
or last call.
|
|
|
|
speech(2) refers to a non-data connection, whereas
|
|
audio31(6) and audio7(7) refer to data mode connections.
|
|
|
|
Note that Q.931, chapter 4.5.5, originally defined
|
|
audio7(7) as '7 kHz audio' and now defines it as
|
|
'Unrestricted digital information with tones/
|
|
announcements'.
|
|
|
|
If since system startup there has been no call on this
|
|
interface, this object has a value of unknown(1)."
|
|
REFERENCE
|
|
"Q.931 [8], chapter 4.5.5, octet 3 of bearer capability
|
|
information element, combined with the User Rate
|
|
(as defined in octets 5 and 5a to 5d), if rate adaption
|
|
is being used."
|
|
::= { isdnBearerEntry 7 }
|
|
|
|
isdnBearerMultirate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This flag indicates if the current or last call used
|
|
multirate. The actual information transfer rate,
|
|
in detail specified in octet 4.1 (rate multiplier),
|
|
is the sum of all B channel ifSpeed values for
|
|
the hyperchannel.
|
|
|
|
If since system startup there was no call on this
|
|
interface, this object has a value of false(2)."
|
|
REFERENCE
|
|
"Q.931 [8], chapter 4.5.5."
|
|
::= { isdnBearerEntry 8 }
|
|
|
|
isdnBearerCallSetupTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime when the ISDN setup message for
|
|
the current or last call was sent or received. If since
|
|
system startup there has been no call on this interface,
|
|
this object has a value of zero."
|
|
::= { isdnBearerEntry 9 }
|
|
|
|
isdnBearerCallConnectTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime when the ISDN connect message for
|
|
the current or last call was sent or received. If since
|
|
system startup there has been no call on this interface,
|
|
this object has a value of zero."
|
|
::= { isdnBearerEntry 10 }
|
|
|
|
isdnBearerChargedUnits OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of charged units for the current or last
|
|
connection. For incoming calls or if charging information
|
|
is not supplied by the switch, the value of this object
|
|
is zero."
|
|
::= { isdnBearerEntry 11 }
|
|
|
|
-- ISDN signaling group
|
|
|
|
isdnSignalingGroup OBJECT IDENTIFIER ::= { isdnMibObjects 3 }
|
|
|
|
-- signaling channel configuration table
|
|
-- There is one entry in this table for each Terminal Endpoint
|
|
-- (link layer connection to the switch).
|
|
-- Usually, there is one endpoint per D channel. In some
|
|
-- cases, however, there can be multiple endpoints.
|
|
-- Thus, entries in this table can be created and deleted.
|
|
-- This also means the creation of an associated ifEntry.
|
|
--
|
|
-- D channel backup and NFAS trunks are handled using the
|
|
-- ifStack table.
|
|
-- In case of D channel backup, there are multiple
|
|
-- Data Link Layer (LAPD) interfaces. Only one interface is
|
|
-- active; all others are dormant(5).
|
|
-- In case of NFAS trunks, one lower interface is the
|
|
-- LAPD interface, while the other lower interfaces are physical
|
|
-- interfaces.
|
|
|
|
-- If directory number and calling address differ from each other
|
|
-- or multiple directory numbers are being used,
|
|
-- the isdnDirectoryTable has to be used to enter such
|
|
-- directory numbers.
|
|
|
|
isdnSignalingGetIndex OBJECT-TYPE
|
|
SYNTAX TestAndIncr
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The recommended procedure for selecting a new index for
|
|
isdnSignalingTable row creation is to GET the value of
|
|
this object, and then to SET the object with the same
|
|
value. If the SET operation succeeds, the manager can use
|
|
this value as an index to create a new row in this table."
|
|
REFERENCE
|
|
"RFC1903, TestAndIncr textual convention."
|
|
::= { isdnSignalingGroup 1 }
|
|
|
|
isdnSignalingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsdnSignalingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISDN signaling table containing configuration and
|
|
operational parameters for all ISDN signaling
|
|
channels on this managed device."
|
|
::= { isdnSignalingGroup 2 }
|
|
|
|
isdnSignalingEntry OBJECT-TYPE
|
|
SYNTAX IsdnSignalingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the ISDN Signaling Table. To create a new
|
|
entry, only isdnSignalingProtocol needs to be specified
|
|
before isdnSignalingStatus can become active(1)."
|
|
INDEX { isdnSignalingIndex }
|
|
::= { isdnSignalingTable 1 }
|
|
|
|
IsdnSignalingEntry ::= SEQUENCE {
|
|
isdnSignalingIndex INTEGER,
|
|
isdnSignalingIfIndex InterfaceIndex,
|
|
isdnSignalingProtocol IsdnSignalingProtocol,
|
|
isdnSignalingCallingAddress DisplayString,
|
|
isdnSignalingSubAddress DisplayString,
|
|
isdnSignalingBchannelCount Integer32,
|
|
isdnSignalingInfoTrapEnable INTEGER,
|
|
isdnSignalingStatus RowStatus
|
|
}
|
|
|
|
isdnSignalingIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies an entry
|
|
in the isdnSignalingTable."
|
|
::= { isdnSignalingEntry 1 }
|
|
|
|
isdnSignalingIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the interface associated with this
|
|
signaling channel."
|
|
::= { isdnSignalingEntry 2 }
|
|
|
|
isdnSignalingProtocol OBJECT-TYPE
|
|
SYNTAX IsdnSignalingProtocol
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The particular protocol type supported by the
|
|
switch providing access to the ISDN network
|
|
to which this signaling channel is connected."
|
|
::= { isdnSignalingEntry 3 }
|
|
|
|
isdnSignalingCallingAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ISDN Address to be assigned to this signaling
|
|
channel. More specifically, this is the 'Calling Address
|
|
information element' as being passed to the switch
|
|
in outgoing call setup messages.
|
|
|
|
It can be an EAZ (1TR6), a calling number (DSS1, ETSI)
|
|
or any other number necessary to identify a signaling
|
|
interface. If there is no such number defined or required,
|
|
this is a zero length string. It is represented in
|
|
DisplayString form.
|
|
|
|
Incoming calls can also be identified by this number.
|
|
If the Directory Number, i.e. the Called Number in
|
|
incoming calls, is different to this number, the
|
|
isdnDirectoryTable has to be used to specify all
|
|
possible Directory Numbers.
|
|
|
|
The format of this information largely depends on the type
|
|
of switch or PBX the device is connected to. Therefore,
|
|
the detailed format of this information is not
|
|
specified and is implementation dependent.
|
|
|
|
If possible, the agent should implement this information
|
|
using the E.164 number format. In this case, the number
|
|
must start with '+'. Otherwise, IA5 number digits must
|
|
be used."
|
|
REFERENCE
|
|
"ITU-T E.164, Q.931 chapter 4.5.10"
|
|
DEFVAL { "" }
|
|
::= { isdnSignalingEntry 4 }
|
|
|
|
isdnSignalingSubAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Supplementary information to the ISDN address assigned
|
|
to this signaling channel. Usually, this is the
|
|
subaddress as defined in Q.931.
|
|
If there is no such number defined or required, this is
|
|
a zero length string.
|
|
The subaddress is used for incoming calls as well as
|
|
for outgoing calls.
|
|
The subaddress is an user supplied string of up to 20
|
|
IA5 characters and is transmitted transparently through
|
|
the network."
|
|
REFERENCE
|
|
"ITU-T I.330, Q.931 chapter 4.5.11"
|
|
DEFVAL { "" }
|
|
::= { isdnSignalingEntry 5 }
|
|
|
|
isdnSignalingBchannelCount OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of B channels (bearer channels)
|
|
managed by this signaling channel. The default value
|
|
of this object depends on the physical interface type
|
|
and is either 2 for Basic Rate interfaces or
|
|
24 (30) for Primary Rate interfaces."
|
|
::= { isdnSignalingEntry 6 }
|
|
|
|
isdnSignalingInfoTrapEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether isdnMibCallInformation traps
|
|
should be generated for calls on this signaling
|
|
channel."
|
|
DEFVAL { disabled }
|
|
::= { isdnSignalingEntry 7 }
|
|
|
|
isdnSignalingStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and delete rows in the
|
|
isdnSignalingTable."
|
|
::= { isdnSignalingEntry 8 }
|
|
|
|
-- Signaling channel statistics table
|
|
-- There is one entry for each signaling connection
|
|
-- in this table.
|
|
-- Note that the ifEntry also has some statistics information.
|
|
|
|
isdnSignalingStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsdnSignalingStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ISDN signaling table containing statistics
|
|
information for all ISDN signaling channels
|
|
on this managed device.
|
|
Only statistical information which is not already being
|
|
counted in the ifTable is being defined in this table."
|
|
::= { isdnSignalingGroup 3 }
|
|
|
|
isdnSignalingStatsEntry OBJECT-TYPE
|
|
SYNTAX IsdnSignalingStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the ISDN Signaling statistics Table."
|
|
AUGMENTS { isdnSignalingEntry }
|
|
::= { isdnSignalingStatsTable 1 }
|
|
|
|
IsdnSignalingStatsEntry ::= SEQUENCE {
|
|
isdnSigStatsInCalls Counter32,
|
|
isdnSigStatsInConnected Counter32,
|
|
isdnSigStatsOutCalls Counter32,
|
|
isdnSigStatsOutConnected Counter32,
|
|
isdnSigStatsChargedUnits Counter32
|
|
}
|
|
|
|
isdnSigStatsInCalls OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of incoming calls on this interface."
|
|
::= { isdnSignalingStatsEntry 1 }
|
|
|
|
isdnSigStatsInConnected OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of incoming calls on this interface
|
|
which were actually connected."
|
|
::= { isdnSignalingStatsEntry 2 }
|
|
|
|
isdnSigStatsOutCalls OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of outgoing calls on this interface."
|
|
::= { isdnSignalingStatsEntry 3 }
|
|
|
|
isdnSigStatsOutConnected OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of outgoing calls on this interface
|
|
which were actually connected."
|
|
::= { isdnSignalingStatsEntry 4 }
|
|
|
|
isdnSigStatsChargedUnits OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of charging units on this interface since
|
|
system startup.
|
|
Only the charging units applying to the local interface,
|
|
i.e. for originated calls or for calls with 'Reverse
|
|
charging' being active, are counted here."
|
|
::= { isdnSignalingStatsEntry 5 }
|
|
|
|
--
|
|
-- The LAPD table
|
|
|
|
isdnLapdTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsdnLapdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing configuration and statistics
|
|
information for all LAPD (D channel Data Link)
|
|
interfaces on this managed device.
|
|
Only statistical information which is not already being
|
|
counted in the ifTable is being defined in this table."
|
|
::= { isdnSignalingGroup 4 }
|
|
|
|
isdnLapdEntry OBJECT-TYPE
|
|
SYNTAX IsdnLapdEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the LAPD Table."
|
|
INDEX { ifIndex }
|
|
::= { isdnLapdTable 1 }
|
|
|
|
IsdnLapdEntry ::= SEQUENCE {
|
|
isdnLapdPrimaryChannel TruthValue,
|
|
isdnLapdOperStatus INTEGER,
|
|
isdnLapdPeerSabme Counter32,
|
|
isdnLapdRecvdFrmr Counter32
|
|
}
|
|
|
|
isdnLapdPrimaryChannel OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to true(1), this D channel is the designated
|
|
primary D channel if D channel backup is active.
|
|
There must be exactly one primary D channel
|
|
configured. If D channel backup is not used, this
|
|
object has a value of true(1)."
|
|
REFERENCE
|
|
"Q.931 [8], Annex F, D channel backup procedures."
|
|
::= { isdnLapdEntry 1 }
|
|
|
|
isdnLapdOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(1),
|
|
l1Active(2),
|
|
l2Active(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational status of this interface:
|
|
|
|
inactive all layers are inactive
|
|
l1Active layer 1 is activated,
|
|
layer 2 datalink not established
|
|
l2Active layer 1 is activated,
|
|
layer 2 datalink established."
|
|
::= { isdnLapdEntry 2 }
|
|
|
|
isdnLapdPeerSabme OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of peer SABME frames received on this
|
|
interface. This is the number of peer-initiated
|
|
new connections on this interface."
|
|
::= { isdnLapdEntry 3 }
|
|
|
|
isdnLapdRecvdFrmr OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LAPD FRMR response frames received.
|
|
This is the number of framing errors on this
|
|
interface."
|
|
::= { isdnLapdEntry 4 }
|
|
|
|
--
|
|
-- Optional groups follow here.
|
|
|
|
-- The Terminal Endpoint group and table
|
|
|
|
-- This table is required only if TEI values or SPID numbers
|
|
-- have to be entered.
|
|
-- The ifIndex values for this table are identical to those of
|
|
-- the isdnSignalingChannel table.
|
|
|
|
isdnEndpointGroup OBJECT IDENTIFIER ::= { isdnMibObjects 4 }
|
|
|
|
isdnEndpointGetIndex OBJECT-TYPE
|
|
SYNTAX TestAndIncr
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The recommended procedure for selecting a new index for
|
|
isdnEndpointTable row creation is to GET the value of
|
|
this object, and then to SET the object with the same
|
|
value. If the SET operation succeeds, the manager can use
|
|
this value as an index to create a new row in this table."
|
|
REFERENCE
|
|
"RFC1903, TestAndIncr textual convention."
|
|
::= { isdnEndpointGroup 1 }
|
|
|
|
isdnEndpointTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsdnEndpointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing configuration for Terminal
|
|
Endpoints."
|
|
::= { isdnEndpointGroup 2 }
|
|
|
|
isdnEndpointEntry OBJECT-TYPE
|
|
SYNTAX IsdnEndpointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Terminal Endpoint Table. The value
|
|
of isdnEndpointIfType must be supplied for a row
|
|
in this table to become active."
|
|
INDEX { isdnEndpointIndex }
|
|
::= { isdnEndpointTable 1 }
|
|
|
|
IsdnEndpointEntry ::= SEQUENCE {
|
|
isdnEndpointIndex INTEGER,
|
|
isdnEndpointIfIndex InterfaceIndex,
|
|
isdnEndpointIfType IANAifType,
|
|
isdnEndpointTeiType INTEGER,
|
|
isdnEndpointTeiValue INTEGER,
|
|
isdnEndpointSpid DisplayString,
|
|
isdnEndpointStatus RowStatus
|
|
}
|
|
|
|
isdnEndpointIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies an entry
|
|
in the isdnEndpointTable."
|
|
::= { isdnEndpointEntry 1 }
|
|
|
|
isdnEndpointIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the interface associated with this
|
|
Terminal Endpoint."
|
|
::= { isdnEndpointEntry 2 }
|
|
|
|
isdnEndpointIfType OBJECT-TYPE
|
|
SYNTAX IANAifType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface type for this Terminal Endpoint.
|
|
Interface types of x25ple(40) and isdn(63) are allowed.
|
|
The interface type is identical to the value of
|
|
ifType in the associated ifEntry."
|
|
::= { isdnEndpointEntry 3 }
|
|
|
|
isdnEndpointTeiType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dynamic(1),
|
|
static(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of TEI (Terminal Endpoint Identifier)
|
|
used for this Terminal Endpoint. In case of dynamic(1),
|
|
the TEI value is selected by the switch. In
|
|
case of static(2), a valid TEI value has to be
|
|
entered in the isdnEndpointTeiValue object.
|
|
The default value for this object depends on the
|
|
interface type as well as the Terminal Endpoint type.
|
|
On Primary Rate interfaces the default value is
|
|
static(2). On Basic Rate interfaces the default value
|
|
is dynamic(1) for isdn(63) Terminal Endpoints and
|
|
static(2) for x25ple(40) Terminal Endpoints."
|
|
::= { isdnEndpointEntry 4 }
|
|
|
|
isdnEndpointTeiValue OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0..255 )
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TEI (Terminal Endpoint Identifier) value
|
|
for this Terminal Endpoint. If isdnEndpointTeiType
|
|
is set to static(2), valid numbers are 0..63,
|
|
while otherwise the value is set internally.
|
|
The default value of this object is 0 for static
|
|
TEI assignment.
|
|
The default value for dynamic TEI assignment is also
|
|
0 as long as no TEI has been assigned. After TEI
|
|
assignment, the assigned TEI value is returned."
|
|
::= { isdnEndpointEntry 5 }
|
|
|
|
isdnEndpointSpid OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Service profile IDentifier (SPID) information
|
|
for this Terminal Endpoint.
|
|
|
|
The SPID is composed of 9-20 numeric characters.
|
|
|
|
This information has to be defined in addition to
|
|
the local number for some switch protocol types,
|
|
e.g. Bellcore NI-1 and NI-2.
|
|
|
|
If this object is not required, it is a
|
|
zero length string."
|
|
REFERENCE
|
|
"Bellcore SR-NWT-001953, Generic Guidelines for ISDN
|
|
Terminal Equipment on Basic Access Interfaces,
|
|
Chapter 8.5.1."
|
|
DEFVAL { "" }
|
|
::= { isdnEndpointEntry 6 }
|
|
|
|
isdnEndpointStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and delete rows in the
|
|
isdnEndpointTable."
|
|
::= { isdnEndpointEntry 7 }
|
|
|
|
--
|
|
-- The Directory Number group
|
|
--
|
|
|
|
isdnDirectoryGroup OBJECT IDENTIFIER ::= { isdnMibObjects 5 }
|
|
|
|
isdnDirectoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsdnDirectoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing Directory Numbers."
|
|
::= { isdnDirectoryGroup 1 }
|
|
|
|
isdnDirectoryEntry OBJECT-TYPE
|
|
SYNTAX IsdnDirectoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Directory Number Table. All objects
|
|
in an entry must be set for a new row to become active."
|
|
INDEX { isdnDirectoryIndex }
|
|
::= { isdnDirectoryTable 1 }
|
|
|
|
IsdnDirectoryEntry ::= SEQUENCE {
|
|
isdnDirectoryIndex INTEGER,
|
|
isdnDirectoryNumber DisplayString,
|
|
isdnDirectorySigIndex INTEGER,
|
|
isdnDirectoryStatus RowStatus
|
|
}
|
|
|
|
isdnDirectoryIndex OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1..'7fffffff'h )
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies an entry
|
|
in the isdnDirectoryTable."
|
|
::= { isdnDirectoryEntry 1 }
|
|
|
|
isdnDirectoryNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Directory Number. Directory Numbers are used
|
|
to identify incoming calls on the signaling
|
|
channel given in isdnDirectorySigIndex.
|
|
|
|
The format of this information largely depends on the type
|
|
of switch or PBX the device is connected to. Therefore,
|
|
the detailed format of this information is not
|
|
specified and is implementation dependent.
|
|
|
|
If possible, the agent should implement this information
|
|
using the E.164 number format. In this case, the number
|
|
must start with '+'. Otherwise, IA5 number digits must
|
|
be used."
|
|
REFERENCE
|
|
"ITU-T E.164, Q.931 chapter 4.5.10"
|
|
::= { isdnDirectoryEntry 2 }
|
|
|
|
isdnDirectorySigIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index pointing to an ISDN signaling channel.
|
|
Incoming calls are accepted on this
|
|
signaling channel if the isdnDirectoryNumber is
|
|
presented as Called Number in the SETUP message."
|
|
::= { isdnDirectoryEntry 3 }
|
|
|
|
isdnDirectoryStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create and delete rows in the
|
|
isdnDirectoryTable."
|
|
::= { isdnDirectoryEntry 4 }
|
|
|
|
-- Traps
|
|
|
|
isdnMibTrapPrefix OBJECT IDENTIFIER ::= { isdnMib 2 }
|
|
isdnMibTraps OBJECT IDENTIFIER ::= { isdnMibTrapPrefix 0 }
|
|
|
|
isdnMibCallInformation NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
ifIndex, -- isdnBearerTable ifIndex
|
|
isdnBearerOperStatus,
|
|
isdnBearerPeerAddress,
|
|
isdnBearerPeerSubAddress,
|
|
isdnBearerCallSetupTime,
|
|
isdnBearerInfoType,
|
|
isdnBearerCallOrigin
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap/inform is sent to the manager under the
|
|
following condidions:
|
|
- on incoming calls for each call which is rejected for
|
|
policy reasons (e.g. unknown neighbor or access
|
|
violation)
|
|
- on outgoing calls whenever a call attempt is determined
|
|
to have ultimately failed. In the event that call retry
|
|
is active, then this will be after all retry attempts
|
|
have failed.
|
|
- whenever a call connects. In this case, the object
|
|
isdnBearerCallConnectTime should be included in the
|
|
trap.
|
|
|
|
Only one such trap is sent in between successful or
|
|
unsuccessful call attempts from or to a single neighbor;
|
|
subsequent call attempts result in no trap.
|
|
|
|
If the Dial Control MIB objects dialCtlNbrCfgId and
|
|
dialCtlNbrCfgIndex are known by the entity generating
|
|
this trap, both objects should be included in the trap
|
|
as well. The receipt of this trap with no dial neighbor
|
|
information indicates that the manager must poll the
|
|
callHistoryTable of the Dial Control MIB to see what
|
|
changed."
|
|
::= { isdnMibTraps 1 }
|
|
|
|
--
|
|
-- conformance information
|
|
--
|
|
|
|
isdnMibConformance OBJECT IDENTIFIER ::= { isdnMib 3 }
|
|
isdnMibCompliances OBJECT IDENTIFIER ::= { isdnMibConformance 1 }
|
|
isdnMibGroups OBJECT IDENTIFIER ::= { isdnMibConformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
isdnMibCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement
|
|
the ISDN MIB."
|
|
MODULE -- this module
|
|
|
|
-- unconditionally mandatory groups
|
|
MANDATORY-GROUPS {
|
|
isdnMibSignalingGroup,
|
|
isdnMibBearerGroup
|
|
-- isdnMibNotificationsGroup
|
|
}
|
|
|
|
-- conditionally mandatory group
|
|
GROUP isdnMibBasicRateGroup
|
|
DESCRIPTION
|
|
"The isdnMibBasicRateGroup is mandatory for entities
|
|
supporting ISDN Basic Rate interfaces."
|
|
|
|
-- optional groups
|
|
GROUP isdnMibEndpointGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all systems
|
|
that attach to ISDN interfaces."
|
|
|
|
GROUP isdnMibDirectoryGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all systems
|
|
that attach to ISDN interfaces."
|
|
|
|
OBJECT isdnBasicRateIfType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is conformant to implement this object as read-only."
|
|
|
|
OBJECT isdnBasicRateLineTopology
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is conformant to implement this object as read-only."
|
|
|
|
OBJECT isdnBasicRateIfMode
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is conformant to implement this object as read-only."
|
|
|
|
OBJECT isdnBasicRateSignalMode
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"It is conformant to implement this object as read-only."
|
|
::= { isdnMibCompliances 1 }
|
|
|
|
-- units of conformance
|
|
|
|
isdnMibBasicRateGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
isdnBasicRateIfType,
|
|
isdnBasicRateLineTopology,
|
|
isdnBasicRateIfMode,
|
|
isdnBasicRateSignalMode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects required for ISDN Basic Rate
|
|
physical interface configuration and statistics."
|
|
::= { isdnMibGroups 1 }
|
|
|
|
isdnMibBearerGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
isdnBearerChannelType,
|
|
isdnBearerOperStatus,
|
|
isdnBearerChannelNumber,
|
|
isdnBearerPeerAddress,
|
|
isdnBearerPeerSubAddress,
|
|
isdnBearerCallOrigin,
|
|
isdnBearerInfoType,
|
|
isdnBearerMultirate,
|
|
isdnBearerCallSetupTime,
|
|
isdnBearerCallConnectTime,
|
|
isdnBearerChargedUnits
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects required for ISDN Bearer channel
|
|
control and statistics."
|
|
::= { isdnMibGroups 2 }
|
|
|
|
isdnMibSignalingGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
isdnSignalingGetIndex,
|
|
isdnSignalingIfIndex,
|
|
isdnSignalingProtocol,
|
|
isdnSignalingCallingAddress,
|
|
isdnSignalingSubAddress,
|
|
isdnSignalingBchannelCount,
|
|
isdnSignalingInfoTrapEnable,
|
|
isdnSignalingStatus,
|
|
isdnSigStatsInCalls,
|
|
isdnSigStatsInConnected,
|
|
isdnSigStatsOutCalls,
|
|
isdnSigStatsOutConnected,
|
|
isdnSigStatsChargedUnits,
|
|
isdnLapdPrimaryChannel,
|
|
isdnLapdOperStatus,
|
|
isdnLapdPeerSabme,
|
|
isdnLapdRecvdFrmr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects required for ISDN D channel
|
|
configuration and statistics."
|
|
::= { isdnMibGroups 3 }
|
|
|
|
isdnMibEndpointGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
isdnEndpointGetIndex,
|
|
isdnEndpointIfIndex,
|
|
isdnEndpointIfType,
|
|
isdnEndpointTeiType,
|
|
isdnEndpointTeiValue,
|
|
isdnEndpointSpid,
|
|
isdnEndpointStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects describing Terminal Endpoints."
|
|
::= { isdnMibGroups 4 }
|
|
|
|
isdnMibDirectoryGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
isdnDirectoryNumber,
|
|
isdnDirectorySigIndex,
|
|
isdnDirectoryStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects describing directory numbers."
|
|
::= { isdnMibGroups 5 }
|
|
|
|
-- isdnMibNotificationsGroup NOTIFICATION-GROUP
|
|
-- NOTIFICATIONS { isdnMibCallInformation }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The notifications which a ISDN MIB entity is
|
|
-- required to implement."
|
|
-- ::= { isdnMibGroups 6 }
|
|
|
|
|
|
END
|