2144 lines
76 KiB
Plaintext
2144 lines
76 KiB
Plaintext
LLDP-V2-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32,
|
|
Counter32,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
TimeStamp,
|
|
TruthValue,
|
|
MacAddress,
|
|
RowStatus
|
|
FROM SNMPv2-TC
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP,
|
|
NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
TimeFilter,
|
|
ZeroBasedCounter32
|
|
FROM RMON2-MIB
|
|
AddressFamilyNumbers
|
|
FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB
|
|
ifGeneralInformationGroup,
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
LldpV2ChassisIdSubtype,
|
|
LldpV2ChassisId,
|
|
LldpV2PortIdSubtype,
|
|
LldpV2PortId,
|
|
LldpV2ManAddrIfSubtype,
|
|
LldpV2ManAddress,
|
|
LldpV2SystemCapabilitiesMap,
|
|
LldpV2DestAddressTableIndex,
|
|
ieee802dot1mibs
|
|
FROM LLDP-V2-TC-MIB;
|
|
|
|
lldpV2MIB MODULE-IDENTITY
|
|
LAST-UPDATED "200906080000Z" -- June 08, 2009
|
|
ORGANIZATION "IEEE 802.1 Working Group"
|
|
CONTACT-INFO
|
|
"WG-URL: http://grouper.ieee.org/groups/802/1/index.html
|
|
WG-EMail: stds-802-1@ieee.org
|
|
|
|
Contact: Tony Jeffree
|
|
Postal: 11a Poplar Grove
|
|
Sale
|
|
Cheshire M33 3AX
|
|
UK
|
|
Tel: +44-161-973-4278
|
|
E-mail: tony@jeffree.co.uk"
|
|
DESCRIPTION
|
|
"Management Information Base module for LLDP configuration,
|
|
statistics, local system data and remote systems data
|
|
components.
|
|
|
|
This MIB module supports the architecture described in
|
|
Clause 6, where multiple LLDP agents can be associated with
|
|
a single Port, each supporting transmission by means of a
|
|
different MAC address.
|
|
|
|
Unless otherwise indicated, the references in this
|
|
MIB module are to IEEE 802.1AB-2009.
|
|
|
|
Copyright (C) IEEE (2009). This version of this MIB module
|
|
is published as subclause 11.5.2 of IEEE Std 802.1AB-2009;
|
|
see the standard itself for full legal notices."
|
|
|
|
REVISION "200906080000Z" -- June 08, 2009
|
|
|
|
DESCRIPTION
|
|
"Published as part of IEEE Std 802.1AB-2009 revision.
|
|
This revision incorporated changes to the MIB to
|
|
support the use of LLDP with multiple destination MAC
|
|
addresses."
|
|
|
|
::= { ieee802dot1mibs 13 }
|
|
|
|
lldpV2Notifications OBJECT IDENTIFIER ::= { lldpV2MIB 0 }
|
|
lldpV2Objects OBJECT IDENTIFIER ::= { lldpV2MIB 1 }
|
|
lldpV2Conformance OBJECT IDENTIFIER ::= { lldpV2MIB 2 }
|
|
|
|
--
|
|
-- LLDP MIB Objects
|
|
--
|
|
|
|
lldpV2Configuration OBJECT IDENTIFIER ::= { lldpV2Objects 1 }
|
|
lldpV2Statistics OBJECT IDENTIFIER ::= { lldpV2Objects 2 }
|
|
lldpV2LocalSystemData OBJECT IDENTIFIER ::= { lldpV2Objects 3 }
|
|
lldpV2RemoteSystemsData OBJECT IDENTIFIER ::= { lldpV2Objects 4 }
|
|
lldpV2Extensions OBJECT IDENTIFIER ::= { lldpV2Objects 5 }
|
|
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
-- L L D P C O N F I G
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
|
|
lldpV2MessageTxInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32(5..32768)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval at which LLDP frames are transmitted on
|
|
behalf of this LLDP agent.
|
|
|
|
The default value for lldpV2MessageTxInterval object is
|
|
30 seconds.
|
|
|
|
The value of this object is restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
REFERENCE
|
|
"9.2.5.7"
|
|
DEFVAL { 30 }
|
|
::= { lldpV2Configuration 1 }
|
|
|
|
lldpV2MessageTxHoldMultiplier OBJECT-TYPE
|
|
SYNTAX Unsigned32(2..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time-to-live value expressed as a multiple of the
|
|
lldpV2MessageTxInterval object. The actual time-to-live value
|
|
used in LLDP frames, transmitted on behalf of this LLDP agent,
|
|
can be expressed by the following formula: TTL = min(65535,
|
|
(lldpV2MessageTxInterval * lldpV2MessageTxHoldMultiplier)) For
|
|
example, if the value of lldpV2MessageTxInterval is '30', and
|
|
the value of lldpV2MessageTxHoldMultiplier is '4', then the
|
|
value '120' is encoded in the TTL field in the LLDP header.
|
|
|
|
The default value for lldpV2MessageTxHoldMultiplier object is 4.
|
|
|
|
The value of this object is restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
REFERENCE
|
|
"9.2.5.6"
|
|
DEFVAL { 4 }
|
|
::= { lldpV2Configuration 2 }
|
|
|
|
lldpV2ReinitDelay OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..10)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lldpV2ReinitDelay indicates the delay (in units of
|
|
seconds) from when lldpPortConfigAdminStatus object of a
|
|
particular port becomes 'disabled' until re-initialization
|
|
is attempted.
|
|
|
|
The default value for lldpV2ReinitDelay is two seconds.
|
|
|
|
The value of this object is restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
REFERENCE
|
|
"9.2.5.10"
|
|
DEFVAL { 2 }
|
|
::= { lldpV2Configuration 3 }
|
|
|
|
lldpV2NotificationInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32(5..3600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the interval between transmission of
|
|
LLDP notifications during normal transmission periods.
|
|
|
|
The value of this object is restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
DEFVAL { 30 }
|
|
::= { lldpV2Configuration 4 }
|
|
|
|
lldpV2TxCreditMax OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..100)
|
|
UNITS "PDUs"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of consecutive LLDPDUs that can be
|
|
transmitted at any time.
|
|
|
|
The default value for lldpV2TxCreditMax object is 5 PDUs.
|
|
The value of this object is restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
REFERENCE
|
|
"9.2.5.17"
|
|
DEFVAL { 5 }
|
|
::= { lldpV2Configuration 5 }
|
|
|
|
lldpV2MessageFastTx OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..3600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval at which LLDP frames are transmitted on
|
|
behalf of this LLDP agent during fast transmission period
|
|
(e.g. when a new neighbor is detected).
|
|
The default value for lldpV2MessageFastTx object is
|
|
1 second.
|
|
The value of this object is restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
REFERENCE
|
|
"9.2.5.5"
|
|
DEFVAL { 1 }
|
|
::= { lldpV2Configuration 6 }
|
|
|
|
lldpV2TxFastInit OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The initial value used to initialize the txFast variable
|
|
which determines the number of transmissions that are
|
|
made in fast transmission mode.
|
|
The default value for lldpV2TxFastInit object is
|
|
4.
|
|
The value of this object is restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
REFERENCE
|
|
"9.2.5.19"
|
|
DEFVAL { 4 }
|
|
::= { lldpV2Configuration 7 }
|
|
--
|
|
-- lldpV2PortConfigTable: LLDP configuration indexed on a per port,
|
|
-- per destination address basis. The ifIndex, coupled with an index into
|
|
-- the lldpDestAddressTable, is used to index per port per
|
|
-- destination MAC address.
|
|
--
|
|
|
|
lldpV2PortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpV2PortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table that controls LLDP frame transmission on individual
|
|
ports and using particular destination MAC addresses."
|
|
::= { lldpV2Configuration 8 }
|
|
|
|
lldpV2PortConfigEntry OBJECT-TYPE
|
|
SYNTAX LldpV2PortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP configuration information for a particular port and
|
|
destination MAC address.
|
|
|
|
This configuration parameter controls the transmission and
|
|
the reception of LLDP frames on those interface/address
|
|
combinations whose rows are created in this table.
|
|
|
|
Rows in this table can only be created for MAC addresses
|
|
that can validly be used in association with the type of
|
|
interface concerned, as defined by table 8-2.
|
|
|
|
The contents of this table is persistent across
|
|
re-initializations or re-boots."
|
|
INDEX { lldpV2PortConfigIfIndex,
|
|
lldpV2PortConfigDestAddressIndex }
|
|
::= { lldpV2PortConfigTable 1 }
|
|
|
|
LldpV2PortConfigEntry ::= SEQUENCE {
|
|
lldpV2PortConfigIfIndex InterfaceIndex,
|
|
lldpV2PortConfigDestAddressIndex LldpV2DestAddressTableIndex,
|
|
lldpV2PortConfigAdminStatus INTEGER,
|
|
lldpV2PortConfigNotificationEnable TruthValue,
|
|
lldpV2PortConfigTLVsTxEnable BITS }
|
|
|
|
lldpV2PortConfigIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index value used to identify the port
|
|
associated with this entry. Its value is an index into
|
|
the interfaces MIB.
|
|
|
|
The value of this object is used as an index to the
|
|
lldpV2PortConfigTable."
|
|
::= { lldpV2PortConfigEntry 1 }
|
|
|
|
lldpV2PortConfigDestAddressIndex OBJECT-TYPE
|
|
SYNTAX LldpV2DestAddressTableIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the destination
|
|
MAC address associated with this entry. Its value identifies
|
|
the row in the lldpV2DestAddressTable where the MAC address
|
|
can be found.
|
|
|
|
The value of this object is used as an index to the
|
|
lldpV2PortConfigTable."
|
|
::= { lldpV2PortConfigEntry 2 }
|
|
|
|
lldpV2PortConfigAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
txOnly(1),
|
|
rxOnly(2),
|
|
txAndRx(3),
|
|
disabled(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administratively desired status of the local LLDP agent.
|
|
|
|
If the associated lldpV2PortConfigAdminStatus object is
|
|
set to a value of 'txOnly(1)', then LLDP agent transmits
|
|
LLDPframes on this port and it does not store any
|
|
information about the remote systems connected.
|
|
|
|
If the associated lldpV2PortConfigAdminStatus object is
|
|
set to a value of 'rxOnly(2)', then the LLDP agent
|
|
receives, but it does not transmit LLDP frames on this port.
|
|
|
|
If the associated lldpV2PortConfigAdminStatus object is set
|
|
to a value of 'txAndRx(3)', then the LLDP agent transmits
|
|
and receives LLDP frames on this port.
|
|
|
|
If the associated lldpV2PortConfigAdminStatus object is set
|
|
to a value of 'disabled(4)', then LLDP agent does not
|
|
transmit or receive LLDP frames on this port. If there is
|
|
remote systems information which is received on this port
|
|
and stored in other tables, before the port's
|
|
lldpV2PortConfigAdminStatus becomes disabled, then that
|
|
information is deleted."
|
|
REFERENCE
|
|
"9.2.5.1"
|
|
DEFVAL { txAndRx }
|
|
::= { lldpV2PortConfigEntry 3 }
|
|
|
|
lldpV2PortConfigNotificationEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lldpV2PortConfigNotificationEnable controls, on a per
|
|
agent basis, whether or not notifications from the agent
|
|
are enabled. The value true(1) means that notifications are
|
|
enabled; the value false(2) means that they are not."
|
|
DEFVAL { false }
|
|
::= { lldpV2PortConfigEntry 4 }
|
|
|
|
lldpV2PortConfigTLVsTxEnable OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
portDesc(0),
|
|
sysName(1),
|
|
sysDesc(2),
|
|
sysCap(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lldpV2PortConfigTLVsTxEnable, defined as a bitmap,
|
|
includes the basic set of LLDP TLVs whose transmission is
|
|
allowed on the local LLDP agent by the network management.
|
|
Each bit in the bitmap corresponds to a TLV type associated
|
|
with a specific optional TLV.
|
|
|
|
It should be noted that the organizationally-specific TLVs
|
|
are excluded from the lldpV2PortConfigTLVsTxEnable bitmap.
|
|
|
|
LLDP Organization Specific Information Extension MIBs should
|
|
have similar configuration object to control transmission
|
|
of their organizationally defined TLVs.
|
|
|
|
The bit 'portDesc(0)' indicates that LLDP agent should
|
|
transmit 'Port Description TLV'.
|
|
|
|
The bit 'sysName(1)' indicates that LLDP agent should transmit
|
|
'System Name TLV'.
|
|
|
|
The bit 'sysDesc(2)' indicates that LLDP agent should transmit
|
|
'System Description TLV'.
|
|
|
|
The bit 'sysCap(3)' indicates that LLDP agent should transmit
|
|
'System Capabilities TLV'.
|
|
|
|
There is no bit reserved for the management address TLV type
|
|
since transmission of management address TLVs are controlled
|
|
by another object, lldpV2ConfigManAddrTable.
|
|
|
|
The default value for lldpV2PortConfigTLVsTxEnable object is
|
|
empty set, which means no enumerated values are set.
|
|
|
|
The value of this object is restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
REFERENCE
|
|
"9.1.2.1"
|
|
DEFVAL { { } }
|
|
::= { lldpV2PortConfigEntry 5 }
|
|
|
|
|
|
--
|
|
-- lldpV2DestAddressTable: Destination MAC addresses used by LLDP
|
|
--
|
|
|
|
lldpV2DestAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpV2DestAddressTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table that contains the set of MAC addresses used
|
|
by LLDP for transmission and reception of LLDPDUs."
|
|
::= { lldpV2Configuration 9 }
|
|
|
|
lldpV2DestAddressTableEntry OBJECT-TYPE
|
|
SYNTAX LldpV2DestAddressTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination MAC address information for LLDP.
|
|
|
|
This configuration parameter identifies a MAC address
|
|
corresponding to a LldpV2DestAddressTableIndex value.
|
|
|
|
Rows in this table are created as necessary, to support
|
|
MAC addresses needed by other tables in the MIB that
|
|
are indexed by MAC address.
|
|
|
|
A given row in this table cannot be deleted if the MAC
|
|
address table index value is in use in any other table
|
|
in the MIB.
|
|
|
|
The contents of this table is persistent aacross
|
|
re-initializations or re-boots."
|
|
INDEX { lldpV2AddressTableIndex }
|
|
::= { lldpV2DestAddressTable 1 }
|
|
|
|
LldpV2DestAddressTableEntry ::= SEQUENCE {
|
|
lldpV2AddressTableIndex LldpV2DestAddressTableIndex,
|
|
lldpV2DestMacAddress MacAddress }
|
|
|
|
lldpV2AddressTableIndex OBJECT-TYPE
|
|
SYNTAX LldpV2DestAddressTableIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the destination
|
|
MAC address associated with this entry.
|
|
|
|
The value of this object is used as an index to the
|
|
lldpV2DestAddressTable."
|
|
::= { lldpV2DestAddressTableEntry 1 }
|
|
|
|
lldpV2DestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address associated with this entry.
|
|
|
|
The octet string identifies an individual or a group
|
|
MAC address that is in use by LLDP as a destination
|
|
MAC address.
|
|
The MAC address is encoded in the octet string in
|
|
canonical format (see IEEE Std 802)."
|
|
::= { lldpV2DestAddressTableEntry 2 }
|
|
|
|
|
|
|
|
--
|
|
-- lldpV2ManAddrConfigTxPortsTable : selection of management addresses
|
|
-- to be transmitted on a specified set of port/destination
|
|
-- address pairs.
|
|
--
|
|
|
|
lldpV2ManAddrConfigTxPortsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpV2ManAddrConfigTxPortsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table that controls selection of LLDP management address
|
|
TLV instances to be transmitted on individual port/
|
|
destination address pairs."
|
|
::= { lldpV2Configuration 10 }
|
|
|
|
lldpV2ManAddrConfigTxPortsEntry OBJECT-TYPE
|
|
SYNTAX LldpV2ManAddrConfigTxPortsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP configuration information that specifies the set
|
|
of port/destination address pairs on which the local
|
|
system management address instance is transmitted.
|
|
|
|
Each active lldpManAddrConfigTxPortsTableV2Entry is
|
|
restored from non-volatile storage and re-created
|
|
after a re-initialization of the management system."
|
|
INDEX {
|
|
lldpV2ManAddrConfigIfIndex,
|
|
lldpV2ManAddrConfigDestAddressIndex,
|
|
lldpV2ManAddrConfigLocManAddrSubtype,
|
|
lldpV2ManAddrConfigLocManAddr }
|
|
::= { lldpV2ManAddrConfigTxPortsTable 1 }
|
|
|
|
LldpV2ManAddrConfigTxPortsEntry ::= SEQUENCE {
|
|
lldpV2ManAddrConfigIfIndex InterfaceIndex,
|
|
lldpV2ManAddrConfigDestAddressIndex LldpV2DestAddressTableIndex,
|
|
lldpV2ManAddrConfigLocManAddrSubtype AddressFamilyNumbers,
|
|
lldpV2ManAddrConfigLocManAddr LldpV2ManAddress,
|
|
lldpV2ManAddrConfigTxEnable TruthValue,
|
|
lldpV2ManAddrConfigRowStatus RowStatus
|
|
}
|
|
|
|
lldpV2ManAddrConfigIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index value used to identify the port
|
|
associated with this entry. Its value is an index into
|
|
the interfaces MIB.
|
|
|
|
The value of this object is used as an index to the
|
|
lldpV2PortConfigTable.
|
|
The value in this column of the table MUST match
|
|
the IfIndex value specified in the BridgePort table."
|
|
::= { lldpV2ManAddrConfigTxPortsEntry 1 }
|
|
|
|
lldpV2ManAddrConfigDestAddressIndex OBJECT-TYPE
|
|
SYNTAX LldpV2DestAddressTableIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the destination
|
|
MAC address associated with this entry. Its value identifies
|
|
the row in the lldpV2DestAddressTable where the MAC address
|
|
can be found.
|
|
|
|
The value of this object is used as an index to the
|
|
lldpV2PortConfigTable."
|
|
::= { lldpV2ManAddrConfigTxPortsEntry 2 }
|
|
|
|
|
|
lldpV2ManAddrConfigLocManAddrSubtype OBJECT-TYPE
|
|
SYNTAX AddressFamilyNumbers
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of management address identifier encoding used in
|
|
the associated 'lldpLocManagmentAddr' object.
|
|
|
|
It should be noted that only a subset of the possible
|
|
address encodings enumerated in AddressFamilyNumbers
|
|
are appropriate for use as a LLDP management
|
|
address, either because some are just not apliccable or
|
|
because the maximum size of a LldpV2ManAddress octet string
|
|
would prevent the use of some address identifier encodings."
|
|
REFERENCE
|
|
"8.5.9.3"
|
|
::= { lldpV2ManAddrConfigTxPortsEntry 3 }
|
|
|
|
lldpV2ManAddrConfigLocManAddr OBJECT-TYPE
|
|
SYNTAX LldpV2ManAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the management address
|
|
component associated with the local system. The purpose of
|
|
this address is to contact the management entity."
|
|
REFERENCE
|
|
"8.5.9.4"
|
|
::= { lldpV2ManAddrConfigTxPortsEntry 4 }
|
|
|
|
|
|
|
|
lldpV2ManAddrConfigTxEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A boolean controlling the transmission of system
|
|
management address instance for the specified port,
|
|
destination, subtype and MAN address used to index
|
|
this table. If set to the default value of false,
|
|
no transmission occurs. If set to true, the
|
|
appropriate information is transmitted out of the
|
|
port specified in the row's index."
|
|
REFERENCE
|
|
"9.1.2.1"
|
|
DEFVAL { false } -- not transmitted
|
|
::= { lldpV2ManAddrConfigTxPortsEntry 5 }
|
|
|
|
lldpV2ManAddrConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the status of an entry in this table, and is used
|
|
to create/delete entries.
|
|
The corresponding instances of the following objects
|
|
must be set before this object can be made active(1):
|
|
lldpV2ManAddrConfigDestAddressIndex
|
|
lldpV2ManAddrConfigLocManAddrSubtype
|
|
lldpV2ManAddrConfigLocManAddr
|
|
lldpV2ManAddrConfigTxEnable
|
|
|
|
The corresponding instances of the following objects
|
|
may not be changed while this object is active(1):
|
|
lldpV2ManAddrConfigDestAddressIndex
|
|
lldpV2ManAddrConfigLocManAddrSubtype
|
|
lldpV2ManAddrConfigLocManAddr "
|
|
::= { lldpV2ManAddrConfigTxPortsEntry 6 }
|
|
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
-- L L D P S T A T S
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
-- LLDP Stats Group
|
|
|
|
lldpV2StatsRemTablesLastChangeTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime object (defined in IETF RFC 3418)
|
|
at the time an entry is created, modified, or deleted in the
|
|
in tables associated with the lldpV2RemoteSystemsData objects
|
|
and all LLDP extension objects associated with remote systems.
|
|
|
|
An NMS can use this object to reduce polling of the
|
|
lldpV2RemoteSystemsData objects."
|
|
::= { lldpV2Statistics 1 }
|
|
|
|
lldpV2StatsRemTablesInserts OBJECT-TYPE
|
|
SYNTAX ZeroBasedCounter32
|
|
UNITS "table entries"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the complete set of information
|
|
advertised by a particular MSAP has been inserted into tables
|
|
contained in lldpV2RemoteSystemsData and lldpV2Extensions objects.
|
|
|
|
The complete set of information received from a particular
|
|
MSAP should be inserted into related tables. If partial
|
|
information cannot be inserted for a reason such as lack
|
|
of resources, all of the complete set of information should
|
|
be removed.
|
|
|
|
This counter should be incremented only once after the
|
|
complete set of information is successfully recorded
|
|
in all related tables. Any failures during inserting
|
|
information set which result in deletion of previously
|
|
inserted information should not trigger any changes in
|
|
lldpV2StatsRemTablesInserts since the insert is not completed
|
|
yet or in lldpStatsRemTablesDeletes, since the deletion
|
|
would only be a partial deletion. If the failure was the
|
|
result of lack of resources, the lldpStatsRemTablesDrops
|
|
counter should be incremented once."
|
|
::= { lldpV2Statistics 2 }
|
|
|
|
lldpV2StatsRemTablesDeletes OBJECT-TYPE
|
|
SYNTAX ZeroBasedCounter32
|
|
UNITS "table entries"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
|
|
DESCRIPTION
|
|
"The number of times the complete set of information
|
|
advertised by a particular MSAP has been deleted from
|
|
tables contained in lldpV2RemoteSystemsData and lldpV2Extensions
|
|
objects.
|
|
|
|
This counter should be incremented only once when the
|
|
complete set of information is completely deleted from all
|
|
related tables. Partial deletions, such as deletion of
|
|
rows associated with a particular MSAP from some tables,
|
|
but not from all tables are not allowed, thus should not
|
|
change the value of this counter."
|
|
::= { lldpV2Statistics 3 }
|
|
|
|
lldpV2StatsRemTablesDrops OBJECT-TYPE
|
|
SYNTAX ZeroBasedCounter32
|
|
UNITS "table entries"
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the complete set of information
|
|
advertised by a particular MSAP could not be entered into
|
|
tables contained in lldpV2RemoteSystemsData and lldpV2Extensions
|
|
objects because of insufficient resources."
|
|
::= { lldpV2Statistics 4 }
|
|
|
|
lldpV2StatsRemTablesAgeouts OBJECT-TYPE
|
|
SYNTAX ZeroBasedCounter32
|
|
UNITS "table entries"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the complete set of information
|
|
advertised by a particular MSAP has been deleted from tables
|
|
contained in lldpV2RemoteSystemsData and lldpV2Extensions objects
|
|
because the information timeliness interval has expired.
|
|
|
|
This counter should be incremented only once when the complete
|
|
set of information is completely invalidated (aged out)
|
|
from all related tables. Partial ageing, similar to deletion
|
|
case, is not allowed, and thus, should not change the value
|
|
of this counter."
|
|
::= { lldpV2Statistics 5 }
|
|
|
|
--
|
|
-- TX statistics
|
|
-- Indexed by port (via ifIndex) and
|
|
-- destination MAC address.
|
|
--
|
|
|
|
lldpV2StatsTxPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpV2StatsTxPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing LLDP transmission statistics for
|
|
individual port/destination address combinations.
|
|
Entries are not required to exist in
|
|
this table while the lldpPortConfigEntry object is equal to
|
|
'disabled(4)'."
|
|
::= { lldpV2Statistics 6 }
|
|
|
|
lldpV2StatsTxPortEntry OBJECT-TYPE
|
|
SYNTAX LldpV2StatsTxPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP frame transmission statistics for a particular port
|
|
and destination MAC address.
|
|
The port is contained in the same chassis as the
|
|
LLDP agent.
|
|
|
|
All counter values in a particular entry shall be
|
|
maintained on a continuing basis and shall not be deleted
|
|
upon expiration of rxInfoTTL timing counters in the LLDP
|
|
remote systems MIB of the receipt of a shutdown frame from
|
|
a remote LLDP agent.
|
|
|
|
All statistical counters associated with a particular
|
|
port on the local LLDP agent become frozen whenever the
|
|
adminStatus is disabled for the same port.
|
|
|
|
Rows in this table can only be created for MAC addresses
|
|
that can validly be used in association with the type of
|
|
interface concerned, as defined by table 8-2."
|
|
INDEX { lldpV2StatsTxIfIndex,
|
|
lldpV2StatsTxDestMACAddress }
|
|
::= { lldpV2StatsTxPortTable 1 }
|
|
|
|
LldpV2StatsTxPortEntry ::= SEQUENCE {
|
|
lldpV2StatsTxIfIndex InterfaceIndex,
|
|
lldpV2StatsTxDestMACAddress LldpV2DestAddressTableIndex,
|
|
lldpV2StatsTxPortFramesTotal Counter32,
|
|
lldpV2StatsTxLLDPDULengthErrors Counter32 }
|
|
|
|
lldpV2StatsTxIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index value used to identify the port
|
|
associated with this entry. Its value is an index
|
|
into the interfaces MIB
|
|
|
|
The value of this object is used as an index to the
|
|
lldpV2StatsTxPortTable."
|
|
::= { lldpV2StatsTxPortEntry 1 }
|
|
|
|
lldpV2StatsTxDestMACAddress OBJECT-TYPE
|
|
SYNTAX LldpV2DestAddressTableIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the destination
|
|
MAC address associated with this entry. Its value identifies
|
|
the row in the lldpV2DestAddressTable where the MAC address
|
|
can be found.
|
|
|
|
The value of this object is used as an index to the
|
|
lldpV2StatsTxPortTable."
|
|
::= { lldpV2StatsTxPortEntry 2 }
|
|
|
|
lldpV2StatsTxPortFramesTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "LLDP frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LLDP frames transmitted by this LLDP agent
|
|
on the indicated port to the destination MAC address
|
|
associated with this row of the table."
|
|
REFERENCE
|
|
"9.2.6.5"
|
|
::= { lldpV2StatsTxPortEntry 3 }
|
|
|
|
lldpV2StatsTxLLDPDULengthErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "LLDP frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LLDPDU Length Errors recorded for the Port."
|
|
REFERENCE
|
|
"9.2.6.8"
|
|
::= { lldpV2StatsTxPortEntry 4 }
|
|
|
|
|
|
|
|
--
|
|
-- lldpV2StatsRxPortTable - RX statistics
|
|
-- This table is indexed by ifIndex and destination MAC address.
|
|
--
|
|
|
|
lldpV2StatsRxPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpV2StatsRxPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing LLDP reception statistics for individual
|
|
ports and destination MAC addresses.
|
|
Entries are not required to exist in this table while
|
|
the lldpPortConfigEntry object is equal to 'disabled(4)'."
|
|
::= { lldpV2Statistics 7 }
|
|
|
|
lldpV2StatsRxPortEntry OBJECT-TYPE
|
|
SYNTAX LldpV2StatsRxPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP frame reception statistics for a particular port.
|
|
The port is contained in the same chassis as the
|
|
LLDP agent.
|
|
|
|
All counter values in a particular entry shall be
|
|
maintained on a continuing basis and shall not be deleted
|
|
upon expiration of rxInfoTTL timing counters in the LLDP
|
|
remote systems MIB of the receipt of a shutdown frame from
|
|
a remote LLDP agent.
|
|
|
|
All statistical counters associated with a particular
|
|
port on the local LLDP agent become frozen whenever the
|
|
adminStatus is disabled for the same port.
|
|
|
|
Rows in this table can only be created for MAC addresses
|
|
that can validly be used in association with the type of
|
|
interface concerned, as defined by table 8-2.
|
|
|
|
The contents of this table is persistent across
|
|
re-initializations or re-boots."
|
|
INDEX { lldpV2StatsRxDestIfIndex,
|
|
lldpV2StatsRxDestMACAddress }
|
|
::= { lldpV2StatsRxPortTable 1 }
|
|
|
|
LldpV2StatsRxPortEntry ::= SEQUENCE {
|
|
lldpV2StatsRxDestIfIndex InterfaceIndex,
|
|
lldpV2StatsRxDestMACAddress LldpV2DestAddressTableIndex,
|
|
lldpV2StatsRxPortFramesDiscardedTotal Counter32,
|
|
lldpV2StatsRxPortFramesErrors Counter32,
|
|
lldpV2StatsRxPortFramesTotal Counter32,
|
|
lldpV2StatsRxPortTLVsDiscardedTotal Counter32,
|
|
lldpV2StatsRxPortTLVsUnrecognizedTotal Counter32,
|
|
lldpV2StatsRxPortAgeoutsTotal ZeroBasedCounter32
|
|
}
|
|
|
|
lldpV2StatsRxDestIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index value used to identify the port
|
|
associated with this entry. Its value is an index
|
|
into the interfaces MIB
|
|
|
|
The value of this object is used as an index to the
|
|
lldpStatsRxPortV2Table."
|
|
::= { lldpV2StatsRxPortEntry 1 }
|
|
|
|
lldpV2StatsRxDestMACAddress OBJECT-TYPE
|
|
SYNTAX LldpV2DestAddressTableIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the destination
|
|
MAC address associated with this entry. Its value identifies
|
|
the row in the lldpV2DestAddressTable where the MAC address
|
|
can be found.
|
|
|
|
The value of this object is used as an index to the
|
|
lldpStatsRxPortV2Table."
|
|
::= { lldpV2StatsRxPortEntry 2 }
|
|
|
|
|
|
lldpV2StatsRxPortFramesDiscardedTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "LLDP frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LLDP frames received by this LLDP agent on
|
|
the indicated port, and then discarded for any reason.
|
|
This counter can provide an indication that LLDP header
|
|
formatting problems may exist with the local LLDP agent in
|
|
the sending system or that LLDPDU validation problems may
|
|
exist with the local LLDP agent in the receiving system."
|
|
REFERENCE
|
|
"9.2.6.2"
|
|
::= { lldpV2StatsRxPortEntry 3 }
|
|
|
|
lldpV2StatsRxPortFramesErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "LLDP frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of invalid LLDP frames received by this LLDP
|
|
agent on the indicated port, while this LLDP agent is enabled."
|
|
REFERENCE
|
|
"9.2.6.3"
|
|
::= { lldpV2StatsRxPortEntry 4 }
|
|
|
|
lldpV2StatsRxPortFramesTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "LLDP frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid LLDP frames received by this LLDP agent
|
|
on the indicated port, while this LLDP agent is enabled."
|
|
REFERENCE
|
|
"9.2.6.4"
|
|
::= { lldpV2StatsRxPortEntry 5 }
|
|
|
|
lldpV2StatsRxPortTLVsDiscardedTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "TLVs"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LLDP TLVs discarded for any reason by this LLDP
|
|
agent on the indicated port."
|
|
REFERENCE
|
|
"9.2.6.6"
|
|
::= { lldpV2StatsRxPortEntry 6 }
|
|
|
|
lldpV2StatsRxPortTLVsUnrecognizedTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "TLVs"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LLDP TLVs received on the given port that
|
|
are not recognized by this LLDP agent on the indicated port.
|
|
|
|
An unrecognized TLV is referred to as the TLV whose type value
|
|
is in the range of reserved TLV types (000 1001 - 111 1110)
|
|
in Table 9.1 of IEEE Std 802.1AB-2004. An unrecognized
|
|
TLV may be a basic management TLV from a later LLDP version."
|
|
REFERENCE
|
|
"9.2.6.7"
|
|
::= { lldpV2StatsRxPortEntry 7 }
|
|
|
|
lldpV2StatsRxPortAgeoutsTotal OBJECT-TYPE
|
|
SYNTAX ZeroBasedCounter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter that represents the number of age-outs that
|
|
occurred on a given port. An age-out is the number of
|
|
times the complete set of information advertised by a
|
|
particular MSAP has been deleted from tables contained in
|
|
lldpV2RemoteSystemsData and lldpV2Extensions objects because
|
|
the information timeliness interval has expired.
|
|
|
|
This counter is similar to lldpV2StatsRemTablesAgeouts, except
|
|
that the counter is on a per port basis. This enables NMS to
|
|
poll tables associated with the lldpV2RemoteSystemsData objects
|
|
and all LLDP extension objects associated with remote systems
|
|
on the indicated port only.
|
|
|
|
This counter is set to zero during agent initialization
|
|
and its value should not be saved in non-volatile storage.
|
|
|
|
This counter is incremented only once when the
|
|
complete set of information is invalidated (aged out) from
|
|
all related tables on a particular port. Partial ageing
|
|
is not allowed."
|
|
REFERENCE
|
|
"9.2.6.1"
|
|
::= { lldpV2StatsRxPortEntry 8 }
|
|
|
|
|
|
-- ***********************************************************
|
|
--
|
|
-- L O C A L S Y S T E M D A T A
|
|
--
|
|
-- ***********************************************************
|
|
|
|
lldpV2LocChassisIdSubtype OBJECT-TYPE
|
|
SYNTAX LldpV2ChassisIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of encoding used to identify the chassis
|
|
associated with the local system."
|
|
REFERENCE
|
|
"8.5.2.2"
|
|
::= { lldpV2LocalSystemData 1 }
|
|
|
|
lldpV2LocChassisId OBJECT-TYPE
|
|
SYNTAX LldpV2ChassisId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the chassis component
|
|
associated with the local system."
|
|
REFERENCE
|
|
"8.5.2.3"
|
|
::= { lldpV2LocalSystemData 2 }
|
|
|
|
lldpV2LocSysName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the system name of the
|
|
local system. If the local agent supports IETF RFC 3418,
|
|
lldpLocSysName object should have the same value of sysName
|
|
object."
|
|
REFERENCE
|
|
"8.5.6.2"
|
|
::= { lldpV2LocalSystemData 3 }
|
|
|
|
lldpV2LocSysDesc OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the system description
|
|
of the local system. If the local agent supports IETF RFC 3418,
|
|
lldpLocSysDesc object should have the same value of sysDesc
|
|
object."
|
|
REFERENCE
|
|
"8.5.7.2"
|
|
::= { lldpV2LocalSystemData 4 }
|
|
|
|
lldpV2LocSysCapSupported OBJECT-TYPE
|
|
SYNTAX LldpV2SystemCapabilitiesMap
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bitmap value used to identify which system capabilities
|
|
are supported on the local system."
|
|
REFERENCE
|
|
"8.5.8.1"
|
|
::= { lldpV2LocalSystemData 5 }
|
|
|
|
lldpV2LocSysCapEnabled OBJECT-TYPE
|
|
SYNTAX LldpV2SystemCapabilitiesMap
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bitmap value used to identify which system capabilities
|
|
are enabled on the local system."
|
|
REFERENCE
|
|
"8.5.8.2"
|
|
::= { lldpV2LocalSystemData 6 }
|
|
|
|
|
|
--
|
|
-- lldpV2LocPortTable : Port specific Local system data
|
|
-- Indexed by ifIndex.
|
|
--
|
|
|
|
lldpV2LocPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpV2LocPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one row per port
|
|
of information associated with the local
|
|
system known to this agent."
|
|
::= { lldpV2LocalSystemData 7 }
|
|
|
|
lldpV2LocPortEntry OBJECT-TYPE
|
|
SYNTAX LldpV2LocPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular port component.
|
|
|
|
Entries may be created and deleted in this table by the
|
|
agent.
|
|
|
|
Rows in this table can only be created for MAC addresses
|
|
that can validly be used in association with the type of
|
|
interface concerned, as defined by table 8-2.
|
|
|
|
The contents of this table is persistent across
|
|
re-initializations or re-boots."
|
|
INDEX { lldpV2LocPortIfIndex }
|
|
::= { lldpV2LocPortTable 1 }
|
|
|
|
LldpV2LocPortEntry ::= SEQUENCE {
|
|
lldpV2LocPortIfIndex InterfaceIndex,
|
|
lldpV2LocPortIdSubtype LldpV2PortIdSubtype,
|
|
lldpV2LocPortId LldpV2PortId,
|
|
lldpV2LocPortDesc SnmpAdminString
|
|
}
|
|
|
|
lldpV2LocPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index value used to identify the port
|
|
associated with this entry. Its value is an index
|
|
into the interfaces MIB
|
|
|
|
The value of this object is used as an index to the
|
|
lldpV2LocPortTable."
|
|
::= { lldpV2LocPortEntry 1 }
|
|
|
|
lldpV2LocPortIdSubtype OBJECT-TYPE
|
|
SYNTAX LldpV2PortIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of port identifier encoding used in the associated
|
|
'lldpLocPortId' object."
|
|
REFERENCE
|
|
"8.5.3.2"
|
|
::= { lldpV2LocPortEntry 2 }
|
|
|
|
lldpV2LocPortId OBJECT-TYPE
|
|
SYNTAX LldpV2PortId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the port component
|
|
associated with a given port in the local system."
|
|
REFERENCE
|
|
"8.5.3.3"
|
|
::= { lldpV2LocPortEntry 3 }
|
|
|
|
lldpV2LocPortDesc OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the IEEE 802 LAN station's port
|
|
description associated with the local system. If the local
|
|
agent supports IETF RFC 2863, lldpLocPortDesc object should
|
|
have the same value of ifDescr object."
|
|
REFERENCE
|
|
"8.5.5.2"
|
|
::= { lldpV2LocPortEntry 4 }
|
|
|
|
--
|
|
-- lldpV2LocManAddrTable : Management addresses of the local system
|
|
--
|
|
|
|
lldpV2LocManAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpV2LocManAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains management address information on the
|
|
local system known to this agent."
|
|
::= { lldpV2LocalSystemData 8 }
|
|
|
|
lldpV2LocManAddrEntry OBJECT-TYPE
|
|
SYNTAX LldpV2LocManAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Management address information about a particular chassis
|
|
component. There may be multiple management addresses
|
|
configured on the system identified by a particular
|
|
lldpLocChassisId. Each management address should have
|
|
distinct 'management address type' (lldpV2LocManAddrSubtype) and
|
|
'management address' (lldpLocManAddr.)
|
|
|
|
Entries may be created and deleted in this table by the
|
|
agent.
|
|
Since a variable length octetstring is used as an index
|
|
in a table, the address length is encoded as part of the OID
|
|
(as per IETF RFC 2578)."
|
|
INDEX { lldpV2LocManAddrSubtype,
|
|
lldpV2LocManAddr }
|
|
::= { lldpV2LocManAddrTable 1 }
|
|
|
|
LldpV2LocManAddrEntry ::= SEQUENCE {
|
|
lldpV2LocManAddrSubtype AddressFamilyNumbers,
|
|
lldpV2LocManAddr LldpV2ManAddress,
|
|
lldpV2LocManAddrLen Unsigned32,
|
|
lldpV2LocManAddrIfSubtype LldpV2ManAddrIfSubtype,
|
|
lldpV2LocManAddrIfId Unsigned32,
|
|
lldpV2LocManAddrOID OBJECT IDENTIFIER
|
|
}
|
|
|
|
lldpV2LocManAddrSubtype OBJECT-TYPE
|
|
SYNTAX AddressFamilyNumbers
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of management address identifier encoding used in
|
|
the associated 'lldpLocManagmentAddr' object.
|
|
|
|
It should be noted that only a subset of the possible
|
|
address encodings enumerated in AddressFamilyNumbers
|
|
are appropriate for use as a LLDP management
|
|
address, either because some are just not apliccable or
|
|
because the maximum size of a LldpV2ManAddress octet string
|
|
would prevent the use of some address identifier encodings."
|
|
REFERENCE
|
|
"8.5.9.3"
|
|
::= { lldpV2LocManAddrEntry 1 }
|
|
|
|
lldpV2LocManAddr OBJECT-TYPE
|
|
SYNTAX LldpV2ManAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the management address
|
|
component associated with the local system. The purpose of
|
|
this address is to contact the management entity."
|
|
REFERENCE
|
|
"8.5.9.4"
|
|
::= { lldpV2LocManAddrEntry 2 }
|
|
|
|
lldpV2LocManAddrLen OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total length of the management address subtype and the
|
|
management address fields in LLDPDUs transmitted by the
|
|
local LLDP agent.
|
|
|
|
The management address length field is needed so that the
|
|
receiving systems that do not implement SNMP are not
|
|
required to implement an iana family numbers/address length
|
|
equivalency table in order to decode the management address."
|
|
REFERENCE
|
|
"8.5.9.2"
|
|
::= { lldpV2LocManAddrEntry 3 }
|
|
|
|
|
|
lldpV2LocManAddrIfSubtype OBJECT-TYPE
|
|
SYNTAX LldpV2ManAddrIfSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enumeration value that identifies the interface numbering
|
|
method used for defining the interface number
|
|
(lldpV2LocManAddrIfId), associated with the local system."
|
|
REFERENCE
|
|
"8.5.9.5"
|
|
::= { lldpV2LocManAddrEntry 4 }
|
|
|
|
lldpV2LocManAddrIfId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The integer value used to identify the interface number
|
|
regarding the management address component associated with
|
|
the local system."
|
|
REFERENCE
|
|
"8.5.9.6"
|
|
::= { lldpV2LocManAddrEntry 5 }
|
|
|
|
lldpV2LocManAddrOID OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OID value used to identify the type of hardware component
|
|
or protocol entity associated with the management address
|
|
advertised by the local system agent."
|
|
REFERENCE
|
|
"8.5.9.8"
|
|
::= { lldpV2LocManAddrEntry 6 }
|
|
|
|
|
|
-- ***********************************************************
|
|
--
|
|
-- R E M O T E S Y S T E M S D A T A
|
|
--
|
|
-- ***********************************************************
|
|
|
|
|
|
--
|
|
-- lldpV2RemTable
|
|
-- Indexed by ifIndex and destination MAC address.
|
|
--
|
|
|
|
lldpV2RemTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpV2RemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one or more rows per physical network
|
|
connection known to this agent. The agent may wish to ensure
|
|
that only one lldpRemEntry is present for each local port
|
|
and destination MAC address,
|
|
or it may choose to maintain multiple lldpRemEntries for
|
|
the same local port and destination MAC address.
|
|
|
|
The following procedure may be used to retrieve remote
|
|
systems information updates from an LLDP agent:
|
|
|
|
1. NMS polls all tables associated with remote systems
|
|
and keeps a local copy of the information retrieved.
|
|
NMS polls periodically the values of the following
|
|
objects:
|
|
a. lldpV2StatsRemTablesInserts
|
|
b. lldpV2StatsRemTablesDeletes
|
|
c. lldpV2StatsRemTablesDrops
|
|
d. lldpV2StatsRemTablesAgeouts
|
|
e. lldpV2StatsRxPortAgeoutsTotal for all ports.
|
|
|
|
2. LLDP agent updates remote systems MIB objects, and
|
|
sends out notifications to a list of notification
|
|
destinations.
|
|
|
|
3. NMS receives the notifications and compares the new
|
|
values of objects listed in step 1.
|
|
|
|
Periodically, NMS should poll the object
|
|
lldpV2StatsRemTablesLastChangeTime to find out if anything
|
|
has changed since the last poll. if something has
|
|
changed, NMS polls the objects listed in step 1 to
|
|
figure out what kind of changes occurred in the tables.
|
|
|
|
if value of lldpV2StatsRemTablesInserts has changed,
|
|
then NMS walks all tables by employing TimeFilter
|
|
with the last-polled time value. This request
|
|
returns new objects or objects whose values have been
|
|
updated since the last poll.
|
|
|
|
if value of lldpV2StatsRemTablesAgeouts has changed,
|
|
then NMS walks the lldpStatsRxPortAgeoutsTotal and
|
|
compares the new values with previously recorded ones.
|
|
For ports whose lldpStatsRxPortAgeoutsTotal value is
|
|
greater than the recorded value, NMS can
|
|
retrieve objects associated with those ports from
|
|
table(s) without employing a TimeFilter (which is
|
|
performed by specifying 0 for the TimeFilter.)
|
|
|
|
lldpV2StatsRemTablesDeletes and lldpV2StatsRemTablesDrops
|
|
objects are provided for informational purposes."
|
|
::= { lldpV2RemoteSystemsData 1 }
|
|
|
|
lldpV2RemEntry OBJECT-TYPE
|
|
SYNTAX LldpV2RemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular physical network connection.
|
|
Entries may be created and deleted in this table by the agent,
|
|
if a physical topology discovery process is active.
|
|
|
|
Rows in this table can only be created for MAC addresses
|
|
that can validly be used in association with the type of
|
|
interface concerned, as defined by table 8-2.
|
|
|
|
The contents of this table is persistent across
|
|
re-initializations or re-boots."
|
|
INDEX {
|
|
lldpV2RemTimeMark,
|
|
lldpV2RemLocalIfIndex,
|
|
lldpV2RemLocalDestMACAddress,
|
|
lldpV2RemIndex
|
|
}
|
|
::= { lldpV2RemTable 1 }
|
|
|
|
LldpV2RemEntry ::= SEQUENCE {
|
|
lldpV2RemTimeMark TimeFilter,
|
|
lldpV2RemLocalIfIndex InterfaceIndex,
|
|
lldpV2RemLocalDestMACAddress LldpV2DestAddressTableIndex,
|
|
lldpV2RemIndex Unsigned32,
|
|
lldpV2RemChassisIdSubtype LldpV2ChassisIdSubtype,
|
|
lldpV2RemChassisId LldpV2ChassisId,
|
|
lldpV2RemPortIdSubtype LldpV2PortIdSubtype,
|
|
lldpV2RemPortId LldpV2PortId,
|
|
lldpV2RemPortDesc SnmpAdminString,
|
|
lldpV2RemSysName SnmpAdminString,
|
|
lldpV2RemSysDesc SnmpAdminString,
|
|
lldpV2RemSysCapSupported LldpV2SystemCapabilitiesMap,
|
|
lldpV2RemSysCapEnabled LldpV2SystemCapabilitiesMap,
|
|
lldpV2RemRemoteChanges TruthValue,
|
|
lldpV2RemTooManyNeighbors TruthValue
|
|
}
|
|
|
|
lldpV2RemTimeMark OBJECT-TYPE
|
|
SYNTAX TimeFilter
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A TimeFilter for this entry. See the TimeFilter textual
|
|
convention in IETF RFC 4502 and
|
|
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
|
|
to see how TimeFilter works."
|
|
REFERENCE
|
|
"IETF RFC 4502 section 6"
|
|
::= { lldpV2RemEntry 1 }
|
|
|
|
|
|
lldpV2RemLocalIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface index value used to identify the port
|
|
associated with this entry. Its value is an index
|
|
into the interfaces MIB
|
|
|
|
The value of this object is used as an index to the
|
|
lldpV2RemTable."
|
|
::= { lldpV2RemEntry 2 }
|
|
|
|
lldpV2RemLocalDestMACAddress OBJECT-TYPE
|
|
SYNTAX LldpV2DestAddressTableIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the destination
|
|
MAC address associated with this entry. Its value identifies
|
|
the row in the lldpV2DestAddressTable where the MAC address
|
|
can be found.
|
|
|
|
The value of this object is used as an index to the
|
|
lldpV2RemTable."
|
|
::= { lldpV2RemEntry 3 }
|
|
|
|
|
|
lldpV2RemIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents an arbitrary local integer value used
|
|
by this agent to identify a particular connection instance,
|
|
unique only for the indicated remote system.
|
|
|
|
An agent is encouraged to assign monotonically increasing
|
|
index values to new entries, starting with one, after each
|
|
reboot. It is considered unlikely that the lldpRemIndex
|
|
can wrap between reboots."
|
|
::= { lldpV2RemEntry 4 }
|
|
|
|
lldpV2RemChassisIdSubtype OBJECT-TYPE
|
|
SYNTAX LldpV2ChassisIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of encoding used to identify the chassis associated
|
|
with the remote system."
|
|
REFERENCE
|
|
"8.5.2.2"
|
|
::= { lldpV2RemEntry 5 }
|
|
|
|
lldpV2RemChassisId OBJECT-TYPE
|
|
SYNTAX LldpV2ChassisId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the chassis component
|
|
associated with the remote system."
|
|
REFERENCE
|
|
"8.5.2.3"
|
|
::= { lldpV2RemEntry 6 }
|
|
|
|
lldpV2RemPortIdSubtype OBJECT-TYPE
|
|
SYNTAX LldpV2PortIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of port identifier encoding used in the associated
|
|
'lldpRemPortId' object."
|
|
REFERENCE
|
|
"8.5.3.2"
|
|
::= { lldpV2RemEntry 7 }
|
|
|
|
lldpV2RemPortId OBJECT-TYPE
|
|
SYNTAX LldpV2PortId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the port component
|
|
associated with the remote system."
|
|
REFERENCE
|
|
"8.5.3.3"
|
|
::= { lldpV2RemEntry 8 }
|
|
|
|
lldpV2RemPortDesc OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the description of
|
|
the given port associated with the remote system."
|
|
REFERENCE
|
|
"8.5.5.2"
|
|
::= { lldpV2RemEntry 9 }
|
|
|
|
lldpV2RemSysName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the system name of the
|
|
remote system."
|
|
REFERENCE
|
|
"8.5.6.2"
|
|
::= { lldpV2RemEntry 10 }
|
|
|
|
lldpV2RemSysDesc OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the system description
|
|
of the remote system."
|
|
REFERENCE
|
|
"8.5.7.2"
|
|
::= { lldpV2RemEntry 11 }
|
|
|
|
lldpV2RemSysCapSupported OBJECT-TYPE
|
|
SYNTAX LldpV2SystemCapabilitiesMap
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bitmap value used to identify which system capabilities
|
|
are supported on the remote system."
|
|
REFERENCE
|
|
"8.5.8.1"
|
|
::= { lldpV2RemEntry 12 }
|
|
|
|
lldpV2RemSysCapEnabled OBJECT-TYPE
|
|
SYNTAX LldpV2SystemCapabilitiesMap
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bitmap value used to identify which system capabilities
|
|
are enabled on the remote system."
|
|
REFERENCE
|
|
"8.5.8.2"
|
|
::= { lldpV2RemEntry 13 }
|
|
|
|
lldpV2RemRemoteChanges OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that there are chances in the remote systems
|
|
MIB, as determined by the variable remoteChanges."
|
|
REFERENCE
|
|
"9.2.5.11"
|
|
::= { lldpV2RemEntry 14 }
|
|
|
|
lldpV2RemTooManyNeighbors OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates that there are too many neighbors
|
|
as determined by the variable tooManyNeighbors."
|
|
REFERENCE
|
|
"9.2.5.15"
|
|
::= { lldpV2RemEntry 15 }
|
|
|
|
--
|
|
-- lldpV2RemManAddrTable : Management addresses of the remote system
|
|
-- Version 2 includes additional index values for ifIndex and
|
|
-- destination MAC address.
|
|
--
|
|
|
|
lldpV2RemManAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpV2RemManAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one or more rows per management address
|
|
information on the remote system learned on a particular port
|
|
contained in the local chassis known to this agent."
|
|
::= { lldpV2RemoteSystemsData 2 }
|
|
|
|
lldpV2RemManAddrEntry OBJECT-TYPE
|
|
SYNTAX LldpV2RemManAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Management address information about a particular chassis
|
|
component. There may be multiple management addresses
|
|
configured on the remote system identified by a particular
|
|
lldpRemIndex whose information is received on
|
|
an interface of the local system and a given destination
|
|
MAC address. Each management
|
|
address should have distinct 'management address
|
|
type' (lldpRemManAddrSubtype) and 'management address'
|
|
(lldpRemManAddr.)
|
|
|
|
Entries may be created and deleted in this table by the
|
|
agent.
|
|
Since a variable length octetstring is used as an index
|
|
in a table, theaddress length is encoded as part of the OID
|
|
(as per IETF RFC 2578)."
|
|
INDEX { lldpV2RemTimeMark,
|
|
lldpV2RemLocalIfIndex,
|
|
lldpV2RemLocalDestMACAddress,
|
|
lldpV2RemIndex,
|
|
lldpV2RemManAddrSubtype,
|
|
lldpV2RemManAddr
|
|
}
|
|
::= { lldpV2RemManAddrTable 1 }
|
|
|
|
|
|
LldpV2RemManAddrEntry ::= SEQUENCE {
|
|
lldpV2RemManAddrSubtype AddressFamilyNumbers,
|
|
lldpV2RemManAddr LldpV2ManAddress,
|
|
lldpV2RemManAddrIfSubtype LldpV2ManAddrIfSubtype,
|
|
lldpV2RemManAddrIfId Unsigned32,
|
|
lldpV2RemManAddrOID OBJECT IDENTIFIER
|
|
}
|
|
|
|
lldpV2RemManAddrSubtype OBJECT-TYPE
|
|
SYNTAX AddressFamilyNumbers
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of management address identifier encoding used in
|
|
the associated 'lldpRemManagmentAddr' object.
|
|
|
|
It should be noted that only a subset of the possible
|
|
address encodings enumerated in AddressFamilyNumbers
|
|
are appropriate for use as a LLDP management
|
|
address, either because some are just not apliccable or
|
|
because the maximum size of a LldpV2ManAddress octet string
|
|
would prevent the use of some address identifier encodings."
|
|
REFERENCE
|
|
"8.5.9.3"
|
|
::= { lldpV2RemManAddrEntry 1 }
|
|
|
|
lldpV2RemManAddr OBJECT-TYPE
|
|
SYNTAX LldpV2ManAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the management address
|
|
component associated with the remote system. The purpose
|
|
of this address is to contact the management entity."
|
|
REFERENCE
|
|
"8.5.9.4"
|
|
::= { lldpV2RemManAddrEntry 2 }
|
|
|
|
lldpV2RemManAddrIfSubtype OBJECT-TYPE
|
|
SYNTAX LldpV2ManAddrIfSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enumeration value that identifies the interface numbering
|
|
method used for defining the interface number, associated
|
|
with the remote system."
|
|
REFERENCE
|
|
"8.5.9.5"
|
|
::= { lldpV2RemManAddrEntry 3 }
|
|
|
|
lldpV2RemManAddrIfId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The integer value used to identify the interface number
|
|
regarding the management address component associated with
|
|
the remote system. The value depends upon the value of the
|
|
lldpV2RemManAddrIfSubtype for the table row."
|
|
REFERENCE
|
|
"8.5.9.6"
|
|
::= { lldpV2RemManAddrEntry 4 }
|
|
|
|
lldpV2RemManAddrOID OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OID value used to identify the type of hardware component
|
|
or protocol entity associated with the management address
|
|
advertised by the remote system agent."
|
|
REFERENCE
|
|
"8.5.9.8"
|
|
::= { lldpV2RemManAddrEntry 5 }
|
|
|
|
|
|
|
|
|
|
--
|
|
-- lldpV2RemUnknownTLVTable : Unrecognized TLV information
|
|
-- This version has additional indexes for
|
|
-- ifIndex and destination MAC address
|
|
--
|
|
|
|
lldpV2RemUnknownTLVTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpV2RemUnknownTLVEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains information about an incoming TLV which
|
|
is not recognized by the receiving LLDP agent. The TLV may
|
|
be from a later version of the basic management set.
|
|
|
|
This table should only contain TLVs that are found in
|
|
a single LLDP frame. Entries in this table, associated
|
|
with an MAC service access point (MSAP, the access point
|
|
for MAC services provided to the LCC sublayer, defined
|
|
in IEEE 100, which is also identified with a particular
|
|
lldpRemLocalPortNum, lldpRemIndex pair) are overwritten with
|
|
most recently received unrecognized TLV from the same MSAP,
|
|
or they naturally age out when the rxInfoTTL timer
|
|
(associated with the MSAP) expires."
|
|
REFERENCE
|
|
"9.2.7.7.1"
|
|
::= { lldpV2RemoteSystemsData 3 }
|
|
|
|
lldpV2RemUnknownTLVEntry OBJECT-TYPE
|
|
SYNTAX LldpV2RemUnknownTLVEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an unrecognized TLV received from a
|
|
physical network connection. Entries may be created and
|
|
deleted in this table by the agent, if a physical topology
|
|
discovery process is active."
|
|
INDEX {
|
|
lldpV2RemTimeMark,
|
|
lldpV2RemLocalIfIndex,
|
|
lldpV2RemLocalDestMACAddress,
|
|
lldpV2RemIndex,
|
|
lldpV2RemUnknownTLVType
|
|
}
|
|
::= { lldpV2RemUnknownTLVTable 1 }
|
|
|
|
LldpV2RemUnknownTLVEntry ::= SEQUENCE {
|
|
lldpV2RemUnknownTLVType Unsigned32,
|
|
lldpV2RemUnknownTLVInfo OCTET STRING
|
|
}
|
|
|
|
lldpV2RemUnknownTLVType OBJECT-TYPE
|
|
SYNTAX Unsigned32(9..126)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the value extracted from the type
|
|
field of the TLV."
|
|
REFERENCE
|
|
"9.2.7.7.1"
|
|
::= { lldpV2RemUnknownTLVEntry 1 }
|
|
|
|
lldpV2RemUnknownTLVInfo OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..511))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the value extracted from the value
|
|
field of the TLV."
|
|
REFERENCE
|
|
"9.2.7.7.1"
|
|
::= { lldpV2RemUnknownTLVEntry 2 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- Remote Systems Extension Table - Organizationally-Defined Information
|
|
------------------------------------------------------------------------------
|
|
--
|
|
-- lldpV2RemOrgDefInfoTable - indexed by ifIndex and destination
|
|
-- MAC address.
|
|
--
|
|
|
|
lldpV2RemOrgDefInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpV2RemOrgDefInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one or more rows per physical network
|
|
connection which advertises the organizationally defined
|
|
information.
|
|
|
|
Note that this table contains one or more rows of
|
|
organizationally defined information that is not recognized
|
|
by the local agent.
|
|
|
|
If the local system is capable of recognizing any
|
|
organizationally defined information, appropriate extension
|
|
MIBs from the organization should be used for information
|
|
retrieval."
|
|
::= { lldpV2RemoteSystemsData 4 }
|
|
|
|
lldpV2RemOrgDefInfoEntry OBJECT-TYPE
|
|
SYNTAX LldpV2RemOrgDefInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about the unrecognized organizationally
|
|
defined information advertised by the remote system.
|
|
The lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex,
|
|
lldpRemOrgDefInfoOUI, lldpRemOrgDefInfoSubtype, and
|
|
lldpRemOrgDefInfoIndex are indexes to this table. If there is
|
|
an lldpRemOrgDefInfoEntry associated with a particular remote
|
|
system identified by the lldpRemLocalPortNum and lldpRemIndex,
|
|
then there is an lldpRemEntry associated with the same
|
|
instance (i.e, using same indexes.) When the lldpRemEntry
|
|
for the same index is removed from the lldpRemTable, the
|
|
associated lldpRemOrgDefInfoEntry is removed from
|
|
the lldpRemOrgDefInfoTable.
|
|
|
|
Entries may be created and deleted in this table by the
|
|
agent."
|
|
INDEX { lldpV2RemTimeMark,
|
|
lldpV2RemLocalIfIndex,
|
|
lldpV2RemLocalDestMACAddress,
|
|
lldpV2RemIndex,
|
|
lldpV2RemOrgDefInfoOUI,
|
|
lldpV2RemOrgDefInfoSubtype,
|
|
lldpV2RemOrgDefInfoIndex }
|
|
::= { lldpV2RemOrgDefInfoTable 1 }
|
|
|
|
LldpV2RemOrgDefInfoEntry ::= SEQUENCE {
|
|
lldpV2RemOrgDefInfoOUI OCTET STRING,
|
|
lldpV2RemOrgDefInfoSubtype Unsigned32,
|
|
lldpV2RemOrgDefInfoIndex Unsigned32,
|
|
lldpV2RemOrgDefInfo OCTET STRING
|
|
}
|
|
|
|
lldpV2RemOrgDefInfoOUI OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(3))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Organizationally Unique Identifier (OUI), as defined
|
|
in IEEE Std 802, is a 24 bit (three octets) globally
|
|
unique assigned number referenced by various standards,
|
|
of the information received from the remote system."
|
|
REFERENCE
|
|
"8.6.1.3"
|
|
::= { lldpV2RemOrgDefInfoEntry 1 }
|
|
|
|
lldpV2RemOrgDefInfoSubtype OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The integer value used to identify the subtype of the
|
|
organizationally defined information received from the
|
|
remote system.
|
|
|
|
The subtype value is required to identify different instances
|
|
of organizationally defined information that could not be
|
|
retrieved without a unique identifier that indicates the
|
|
particular type of information contained in the information
|
|
string."
|
|
REFERENCE
|
|
"8.6.1.4"
|
|
::= { lldpV2RemOrgDefInfoEntry 2 }
|
|
|
|
lldpV2RemOrgDefInfoIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents an arbitrary local integer value
|
|
used by this agent to identify a particular unrecognized
|
|
organizationally defined information instance, unique only
|
|
for the lldpRemOrgDefInfoOUI and lldpRemOrgDefInfoSubtype
|
|
from the same remote system.
|
|
|
|
An agent is encouraged to assign monotonically increasing
|
|
index values to new entries, starting with one, after each
|
|
reboot. It is considered unlikely that the
|
|
lldpRemOrgDefInfoIndex can wrap between reboots."
|
|
::= { lldpV2RemOrgDefInfoEntry 3 }
|
|
|
|
lldpV2RemOrgDefInfo OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..507))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the organizationally
|
|
defined information of the remote system. The encoding for
|
|
this object should be as defined for SnmpAdminString TC."
|
|
REFERENCE
|
|
"8.6.1.5"
|
|
::= { lldpV2RemOrgDefInfoEntry 4 }
|
|
|
|
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
-- L L D P M I B N O T I F I C A T I O N S
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
|
|
lldpV2NotificationPrefix OBJECT IDENTIFIER ::= { lldpV2Notifications 0 }
|
|
|
|
lldpV2RemTablesChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
lldpV2StatsRemTablesInserts,
|
|
lldpV2StatsRemTablesDeletes,
|
|
lldpV2StatsRemTablesDrops,
|
|
lldpV2StatsRemTablesAgeouts
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A lldpV2RemTablesChange notification is sent when the value
|
|
of lldpV2StatsRemTablesLastChangeTime changes. It can be
|
|
utilized by an NMS to trigger LLDP remote systems table
|
|
maintenance polls.
|
|
|
|
Note that transmission of lldpV2RemTablesChange
|
|
notifications are throttled by the agent, as specified by the
|
|
'lldpV2NotificationInterval' object."
|
|
::= { lldpV2NotificationPrefix 1 }
|
|
|
|
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
-- L L D P M I B C O N F O R M A N C E
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
|
|
lldpV2Compliances OBJECT IDENTIFIER ::= { lldpV2Conformance 1 }
|
|
lldpV2Groups OBJECT IDENTIFIER ::= { lldpV2Conformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
lldpV2TxRxCompliance MODULE-COMPLIANCE
|
|
--V2 to add ifGeneralInformationGroup
|
|
--and support re-indexed tables
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A compliance statement for all SNMP entities that
|
|
implement the LLDP MIB as either a transmitter or
|
|
a receiver of LLDPDUs.
|
|
|
|
This version defines compliance requirements for
|
|
V2 of the LLDP MIB module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { lldpV2ConfigGroup,
|
|
ifGeneralInformationGroup
|
|
}
|
|
|
|
::= { lldpV2Compliances 1 }
|
|
|
|
lldpV2TxCompliance MODULE-COMPLIANCE
|
|
--V2 requirements for transmitters of LLDPDUs
|
|
--and support re-indexed tables
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A compliance statement for SNMP entities that implement
|
|
the LLDP MIB and have the capability of transmitting
|
|
LLDP frames.
|
|
|
|
This version defines compliance requirements for
|
|
V2 of the LLDP MIB module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { lldpV2ConfigTxGroup,
|
|
lldpV2StatsTxGroup,
|
|
lldpV2LocSysGroup
|
|
}
|
|
|
|
::= { lldpV2Compliances 2 }
|
|
|
|
lldpV2RxCompliance MODULE-COMPLIANCE
|
|
--V2 requirements for receivers of LLDPDUs
|
|
--and support re-indexed tables
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities that implement
|
|
the LLDP MIB.
|
|
|
|
This version defines compliance requirements for
|
|
V2 of the LLDP MIB module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { lldpV2ConfigRxGroup,
|
|
lldpV2StatsRxGroup,
|
|
lldpV2RemSysGroup,
|
|
lldpV2NotificationsGroup
|
|
}
|
|
|
|
::= { lldpV2Compliances 3 }
|
|
|
|
-- MIB groupings
|
|
|
|
|
|
lldpV2ConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpV2PortConfigAdminStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to configure the
|
|
LLDP implementation behavior."
|
|
::= { lldpV2Groups 1 }
|
|
|
|
|
|
lldpV2ConfigRxGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpV2NotificationInterval,
|
|
lldpV2PortConfigNotificationEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to configure the
|
|
LLDP implementation behavior."
|
|
::= { lldpV2Groups 2 }
|
|
|
|
|
|
lldpV2ConfigTxGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpV2MessageTxInterval,
|
|
lldpV2MessageTxHoldMultiplier,
|
|
lldpV2ReinitDelay,
|
|
lldpV2PortConfigTLVsTxEnable,
|
|
lldpV2ManAddrConfigTxEnable,
|
|
lldpV2ManAddrConfigRowStatus,
|
|
lldpV2TxCreditMax,
|
|
lldpV2MessageFastTx,
|
|
lldpV2TxFastInit,
|
|
lldpV2DestMacAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to configure the
|
|
LLDP implementation behavior."
|
|
::= { lldpV2Groups 3 }
|
|
|
|
|
|
lldpV2StatsRxGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpV2StatsRemTablesLastChangeTime,
|
|
lldpV2StatsRemTablesInserts,
|
|
lldpV2StatsRemTablesDeletes,
|
|
lldpV2StatsRemTablesDrops,
|
|
lldpV2StatsRemTablesAgeouts,
|
|
lldpV2StatsRxPortFramesDiscardedTotal,
|
|
lldpV2StatsRxPortFramesErrors,
|
|
lldpV2StatsRxPortFramesTotal,
|
|
lldpV2StatsRxPortTLVsDiscardedTotal,
|
|
lldpV2StatsRxPortTLVsUnrecognizedTotal,
|
|
lldpV2StatsRxPortAgeoutsTotal
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent LLDP
|
|
reception statistics."
|
|
::= { lldpV2Groups 4 }
|
|
|
|
|
|
lldpV2StatsTxGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpV2StatsTxPortFramesTotal,
|
|
lldpV2StatsTxLLDPDULengthErrors
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent LLDP
|
|
transmission statistics."
|
|
::= { lldpV2Groups 5 }
|
|
|
|
|
|
lldpV2LocSysGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpV2LocChassisIdSubtype,
|
|
lldpV2LocChassisId,
|
|
lldpV2LocPortIdSubtype,
|
|
lldpV2LocPortId,
|
|
lldpV2LocPortDesc,
|
|
lldpV2LocSysDesc,
|
|
lldpV2LocSysName,
|
|
lldpV2LocSysCapSupported,
|
|
lldpV2LocSysCapEnabled,
|
|
lldpV2LocManAddrLen,
|
|
lldpV2LocManAddrIfSubtype,
|
|
lldpV2LocManAddrIfId,
|
|
lldpV2LocManAddrOID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent LLDP
|
|
Local System Information."
|
|
::= { lldpV2Groups 6 }
|
|
|
|
lldpV2RemSysGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpV2RemChassisIdSubtype,
|
|
lldpV2RemChassisId,
|
|
lldpV2RemPortIdSubtype,
|
|
lldpV2RemPortId,
|
|
lldpV2RemPortDesc,
|
|
lldpV2RemSysName,
|
|
lldpV2RemSysDesc,
|
|
lldpV2RemSysCapSupported,
|
|
lldpV2RemSysCapEnabled,
|
|
lldpV2RemRemoteChanges,
|
|
lldpV2RemTooManyNeighbors,
|
|
lldpV2RemManAddrIfSubtype,
|
|
lldpV2RemManAddrIfId,
|
|
lldpV2RemManAddrOID,
|
|
lldpV2RemUnknownTLVInfo,
|
|
lldpV2RemOrgDefInfo
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent
|
|
LLDP Remote Systems Information. The objects represent the
|
|
information associated with the basic TLV set. Please note
|
|
that even the agent doesn't implement some of the optional
|
|
TLVs, it shall recognize all the optional TLV information
|
|
that the remote system may advertise."
|
|
::= { lldpV2Groups 7 }
|
|
|
|
lldpV2NotificationsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
lldpV2RemTablesChange
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of notifications used to indicate LLDP MIB
|
|
data consistency and general status information."
|
|
::= { lldpV2Groups 8 }
|
|
|
|
END
|