mibs/MIBS/PTOPO-MIB
2023-12-05 12:25:34 +01:00

828 lines
31 KiB
Plaintext

-- WinAgents MIB Extraction Wizard
-- Extracted from rfc2922.txt 16.03.2005 20:21:53
PTOPO-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Integer32, Counter32, mib-2
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, AutonomousType, RowStatus, TimeStamp, TruthValue
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TimeFilter
FROM RMON2-MIB
PhysicalIndex
FROM ENTITY-MIB
AddressFamilyNumbers
FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB;
ptopoMIB MODULE-IDENTITY
LAST-UPDATED "200009210000Z"
ORGANIZATION "IETF; PTOPOMIB Working Group"
CONTACT-INFO
"PTOPOMIB WG Discussion:
ptopo@3com.com
Subscription:
majordomo@3com.com
msg body: [un]subscribe ptopomib
Andy Bierman
Cisco Systems Inc.
170 West Tasman Drive
San Jose, CA 95134
408-527-3711
abierman@cisco.com
Kendall S. Jones
Nortel Networks
4401 Great America Parkway
Santa Clara, CA 95054
408-495-7356
kejones@nortelnetworks.com"
DESCRIPTION
"The MIB module for physical topology information."
REVISION "200009210000Z"
DESCRIPTION
"Initial Version of the Physical Topology MIB. This version
published as RFC 2922."
::= { mib-2 79 }
ptopoMIBObjects OBJECT IDENTIFIER ::= { ptopoMIB 1 }
-- MIB groups
ptopoData OBJECT IDENTIFIER ::= { ptopoMIBObjects 1 }
ptopoGeneral OBJECT IDENTIFIER ::= { ptopoMIBObjects 2 }
ptopoConfig OBJECT IDENTIFIER ::= { ptopoMIBObjects 3 }
-- textual conventions
PtopoGenAddr ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value of an address."
SYNTAX OCTET STRING (SIZE (0..20))
PtopoChassisIdType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the source of a chassis identifier.
The enumeration 'chasIdEntPhysicalAlias(1)' represents a
chassis identifier based on the value of entPhysicalAlias
for a chassis component (i.e., an entPhysicalClass value of
'chassis(3)').
The enumeration 'chasIdIfAlias(2)' represents a chassis
identifier based on the value of ifAlias for an interface
on the containing chassis.
The enumeration 'chasIdPortEntPhysicalAlias(3)' represents
a chassis identifier based on the value of entPhysicalAlias
for a port or backplane component (i.e., entPhysicalClass
value of 'port(10)' or 'backplane(4)'), within the
containing chassis.
The enumeration 'chasIdMacAddress(4)' represents a chassis
identifier based on the value of a unicast source MAC
address (encoded in network byte order and IEEE 802.3
canonical bit order), of a port on the containing chassis.
The enumeration 'chasIdPtopoGenAddr(5)' represents a
chassis identifier based on a network address, associated
with a particular chassis. The encoded address is actually
composed of two fields. The first field is a single octet,
representing the IANA AddressFamilyNumbers value for the
specific address type, and the second field is the
PtopoGenAddr address value."
SYNTAX INTEGER {
chasIdEntPhysicalAlias(1),
chasIdIfAlias(2),
chasIdPortEntPhysicalAlias(3),
chasIdMacAddress(4),
chasIdPtopoGenAddr(5)
}
PtopoChassisId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the format of a chassis identifier
string. Objects of this type are always used with an
associated PtopoChassisIdType object, which identifies the
format of the particular PtopoChassisId object instance.
If the associated PtopoChassisIdType object has a value of
'chasIdEntPhysicalAlias(1)', then the octet string
identifies a particular instance of the entPhysicalAlias
object for a chassis component (i.e., an entPhysicalClass
value of 'chassis(3)').
If the associated PtopoChassisIdType object has a value of
'chasIdIfAlias(2)', then the octet string identifies a
particular instance of the ifAlias object for an interface
on the containing chassis.
If the associated PtopoChassisIdType object has a value of
'chasIdPortEntPhysicalAlias(3)', then the octet string
identifies a particular instance of the entPhysicalAlias
object for a port or backplane component within the
containing chassis.
If the associated PtopoChassisIdType object has a value of
'chasIdMacAddress(4)', then this string identifies a
particular unicast source MAC address (encoded in network
byte order and IEEE 802.3 canonical bit order), of a port on
the containing chassis.
If the associated PtopoChassisIdType object has a value of
'chasIdPtopoGenAddr(5)', then this string identifies a
particular network address, encoded in network byte order,
associated with one or more ports on the containing chassis.
The first octet contains the IANA Address Family Numbers
enumeration value for the specific address type, and octets
2 through N contain the PtopoGenAddr address value in
network byte order."
SYNTAX OCTET STRING (SIZE (1..32))
PtopoPortIdType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the source of a particular type of port
identifier used in the PTOPO MIB.
The enumeration 'portIdIfAlias(1)' represents a port
identifier based on the ifAlias MIB object.
The enumeration 'portIdPortEntPhysicalAlias(2)' represents a
port identifier based on the value of entPhysicalAlias for a
port or backplane component (i.e., entPhysicalClass value of
'port(10)' or 'backplane(4)'), within the containing
chassis.
The enumeration 'portIdMacAddr(3)' represents a port
identifier based on a unicast source MAC address, which has
been detected by the agent and associated with a particular
port.
The enumeration 'portIdPtopoGenAddr(4)' represents a port
identifier based on a network address, detected by the agent
and associated with a particular port."
SYNTAX INTEGER {
portIdIfAlias(1),
portIdEntPhysicalAlias(2),
portIdMacAddr(3),
portIdPtopoGenAddr(4)
}
PtopoPortId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the format of a port identifier string.
Objects of this type are always used with an associated
PtopoPortIdType object, which identifies the format of the
particular PtopoPortId object instance.
If the associated PtopoPortIdType object has a value of
'portIdIfAlias(1)', then the octet string identifies a
particular instance of the ifAlias object.
If the associated PtopoPortIdType object has a value of
'portIdEntPhysicalAlias(2)', then the octet string
identifies a particular instance of the entPhysicalAlias
object for a port component (i.e., entPhysicalClass value of
'port(10)').
If the associated PtopoPortIdType object has a value of
'portIdMacAddr(3)', then this string identifies a particular
unicast source MAC address associated with the port.
If the associated PtopoPortIdType object has a value of
'portIdPtopoGenAddr(4)', then this string identifies a
network address associated with the port. The first octet
contains the IANA AddressFamilyNumbers enumeration value for
the specific address type, and octets 2 through N contain
the PtopoGenAddr address value in network byte order."
SYNTAX OCTET STRING (SIZE (1..32))
PtopoAddrSeenState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the state of address detection for a
particular type of port identifier used in the PTOPO MIB.
The enumeration 'notUsed(1)' represents an entry for which
the particular MIB object is not applicable to the remote
connection endpoint,
The enumeration 'unknown(2)' represents an entry for which
the particular address collection state is not known.
The enumeration 'oneAddr(3)' represents an entry for which
exactly one source address (of the type indicated by the
particular MIB object), has been detected.
The enumeration 'multiAddr(4)' represents an entry for
which more than one source address (of the type indicated by
the particular MIB object), has been detected.
An agent is expected to set the initial state of the
PtopoAddrSeenState to 'notUsed(1)' or 'unknown(2)'.
Note that the PTOPO MIB does not restrict or specify the
means in which the PtopoAddrSeenState is known to an agent.
In particular, an agent may detect this information through
configuration data, or some means other than directly
monitoring all port traffic."
SYNTAX INTEGER {
notUsed(1),
unknown(2),
oneAddr(3),
multiAddr(4)
}
-- ***********************************************************
--
-- P T O P O D A T A G R O U P
--
-- ***********************************************************
-- Connection Table
ptopoConnTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtopoConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one or more rows per physical network
connection known to this agent. The agent may wish to
ensure that only one ptopoConnEntry is present for each
local port, or it may choose to maintain multiple
ptopoConnEntries for the same local port.
Entries based on lower numbered identifier types are
preferred over higher numbered identifier types, i.e., lower
values of the ptopoConnRemoteChassisType and
ptopoConnRemotePortType objects."
::= { ptopoData 1 }
ptopoConnEntry OBJECT-TYPE
SYNTAX PtopoConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular physical network connection.
Entries may be created and deleted in this table, either
manually or by the agent, if a physical topology discovery
process is active."
INDEX {
ptopoConnTimeMark,
ptopoConnLocalChassis,
ptopoConnLocalPort,
ptopoConnIndex
}
::= { ptopoConnTable 1 }
PtopoConnEntry ::= SEQUENCE {
ptopoConnTimeMark TimeFilter,
ptopoConnLocalChassis PhysicalIndex,
ptopoConnLocalPort PhysicalIndex,
ptopoConnIndex Integer32,
ptopoConnRemoteChassisType PtopoChassisIdType,
ptopoConnRemoteChassis PtopoChassisId,
ptopoConnRemotePortType PtopoPortIdType,
ptopoConnRemotePort PtopoPortId,
ptopoConnDiscAlgorithm AutonomousType,
ptopoConnAgentNetAddrType AddressFamilyNumbers,
ptopoConnAgentNetAddr PtopoGenAddr,
ptopoConnMultiMacSASeen PtopoAddrSeenState,
ptopoConnMultiNetSASeen PtopoAddrSeenState,
ptopoConnIsStatic TruthValue,
ptopoConnLastVerifyTime TimeStamp,
ptopoConnRowStatus RowStatus
}
ptopoConnTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter textual
convention in RFC 2021 to see how this works."
::= { ptopoConnEntry 1 }
ptopoConnLocalChassis OBJECT-TYPE
SYNTAX PhysicalIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entPhysicalIndex value used to identify the chassis
component associated with the local connection endpoint."
::= { ptopoConnEntry 2 }
ptopoConnLocalPort OBJECT-TYPE
SYNTAX PhysicalIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entPhysicalIndex value used to identify the port
component associated with the local connection endpoint."
::= { ptopoConnEntry 3 }
ptopoConnIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents an arbitrary local integer value
used by this agent to identify a particular connection
instance, unique only for the indicated local connection
endpoint.
A particular ptopoConnIndex value may be reused in the event
an entry is aged out and later re-learned with the same (or
different) remote chassis and port identifiers.
An agent is encouraged to assign monotonically increasing
index values to new entries, starting with one, after each
reboot. It is considered unlikely that the ptopoConnIndex
will wrap between reboots."
::= { ptopoConnEntry 4 }
ptopoConnRemoteChassisType OBJECT-TYPE
SYNTAX PtopoChassisIdType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of encoding used to identify the chassis
associated with the remote connection endpoint.
This object may not be modified if the associated
ptopoConnRowStatus object has a value of active(1)."
::= { ptopoConnEntry 5 }
ptopoConnRemoteChassis OBJECT-TYPE
SYNTAX PtopoChassisId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The string value used to identify the chassis component
associated with the remote connection endpoint.
This object may not be modified if the associated
ptopoConnRowStatus object has a value of active(1)."
::= { ptopoConnEntry 6 }
ptopoConnRemotePortType OBJECT-TYPE
SYNTAX PtopoPortIdType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of port identifier encoding used in the associated
'ptopoConnRemotePort' object.
This object may not be modified if the associated
ptopoConnRowStatus object has a value of active(1)."
::= { ptopoConnEntry 7 }
ptopoConnRemotePort OBJECT-TYPE
SYNTAX PtopoPortId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The string value used to identify the port component
associated with the remote connection endpoint.
This object may not be modified if the associated
ptopoConnRowStatus object has a value of active(1)."
::= { ptopoConnEntry 8 }
ptopoConnDiscAlgorithm OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of the algorithm used to discover the
information contained in this conceptual row.
A value of ptopoDiscoveryLocal indicates this entry was
configured by the local agent, without use of a discovery
protocol.
A value of { 0 0 } indicates this entry was created manually
by an NMS via the associated RowStatus object. "
::= { ptopoConnEntry 9 }
ptopoConnAgentNetAddrType OBJECT-TYPE
SYNTAX AddressFamilyNumbers
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This network address type of the associated
ptopoConnNetAddr object, unless that object contains a zero
length string. In such a case, an NMS application should
ignore any returned value for this object.
This object may not be modified if the associated
ptopoConnRowStatus object has a value of active(1)."
::= { ptopoConnEntry 10 }
ptopoConnAgentNetAddr OBJECT-TYPE
SYNTAX PtopoGenAddr
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies a network address which may be used
to reach an SNMP agent entity containing information for the
chassis and port components represented by the associated
'ptopoConnRemoteChassis' and 'ptopoConnRemotePort' objects.
If no such address is known, then this object shall contain
an empty string.
This object may not be modified if the associated
ptopoConnRowStatus object has a value of active(1)."
::= { ptopoConnEntry 11 }
ptopoConnMultiMacSASeen OBJECT-TYPE
SYNTAX PtopoAddrSeenState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if multiple unicast source MAC
addresses have been detected by the agent from the remote
connection endpoint, since the creation of this entry.
If this entry has an associated ptopoConnRemoteChassisType
and/or ptopoConnRemotePortType value other than
'portIdMacAddr(3)', then the value 'notUsed(1)' is returned.
Otherwise, one of the following conditions must be true:
If the agent has not yet detected any unicast source MAC
addresses from the remote port, then the value 'unknown(2)'
is returned.
If the agent has detected exactly one unicast source MAC
address from the remote port, then the value 'oneAddr(3)' is
returned.
If the agent has detected more than one unicast source MAC
address from the remote port, then the value 'multiAddr(4)'
is returned."
::= { ptopoConnEntry 12 }
ptopoConnMultiNetSASeen OBJECT-TYPE
SYNTAX PtopoAddrSeenState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if multiple network layer source
addresses have been detected by the agent from the remote
connection endpoint, since the creation of this entry.
If this entry has an associated ptopoConnRemoteChassisType
or ptopoConnRemotePortType value other than
'portIdGenAddr(4)' then the value 'notUsed(1)' is returned.
Otherwise, one of the following conditions must be true:
If the agent has not yet detected any network source
addresses of the appropriate type from the remote port, then
the value 'unknown(2)' is returned.
If the agent has detected exactly one network source address
of the appropriate type from the remote port, then the value
'oneAddr(3)' is returned.
If the agent has detected more than one network source
address (of the same appropriate type) from the remote port,
this the value 'multiAddr(4)' is returned."
::= { ptopoConnEntry 13 }
ptopoConnIsStatic OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies static ptopoConnEntries. If this
object has the value 'true(1)', then this entry is not
subject to any age-out mechanisms implemented by the agent.
If this object has the value 'false(2)', then this entry is
subject to all age-out mechanisms implemented by the agent.
This object may not be modified if the associated
ptopoConnRowStatus object has a value of active(1)."
DEFVAL { false }
::= { ptopoConnEntry 14 }
ptopoConnLastVerifyTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the associated value of ptopoConnIsStatic is equal to
'false(2)', then this object contains the value of sysUpTime
at the time the conceptual row was last verified by the
agent, e.g., via reception of a topology protocol message,
pertaining to the associated remote chassis and port.
If the associated value of ptopoConnIsStatic is equal to
'true(1)', then this object shall contain the value of
sysUpTime at the time this entry was last activated (i.e.,
ptopoConnRowStatus set to 'active(1)')."
::= { ptopoConnEntry 15 }
ptopoConnRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row."
::= { ptopoConnEntry 16 }
-- ***********************************************************
--
-- P T O P O G E N E R A L G R O U P
--
-- ***********************************************************
-- last change time stamp for the whole MIB
ptopoLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time a conceptual row is
created, modified, or deleted in the ptopoConnTable.
An NMS can use this object to reduce polling of the
ptopoData group objects."
::= { ptopoGeneral 1 }
ptopoConnTabInserts OBJECT-TYPE
SYNTAX Counter32
UNITS "table entries"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an entry has been inserted into the
ptopoConnTable."
::= { ptopoGeneral 2 }
ptopoConnTabDeletes OBJECT-TYPE
SYNTAX Counter32
UNITS "table entries"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an entry has been deleted from the
ptopoConnTable."
::= { ptopoGeneral 3 }
ptopoConnTabDrops OBJECT-TYPE
SYNTAX Counter32
UNITS "table entries"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an entry would have been added to the
ptopoConnTable, (e.g., via information learned from a
topology protocol), but was not because of insufficient
resources."
::= { ptopoGeneral 4 }
ptopoConnTabAgeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an entry has been deleted from the
ptopoConnTable because the information timeliness interval
for that entry has expired."
::= { ptopoGeneral 5 }
-- ***********************************************************
--
-- P T O P O C O N F I G G R O U P
--
-- ***********************************************************
ptopoConfigTrapInterval OBJECT-TYPE
SYNTAX Integer32 (0 | 5..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the transmission of PTOPO
notifications.
If this object has a value of zero, then no
ptopoConfigChange notifications will be transmitted by the
agent.
If this object has a non-zero value, then the agent must not
generate more than one ptopoConfigChange trap-event in the
indicated period, where a 'trap-event' is the transmission
of a single notification PDU type to a list of notification
destinations. If additional configuration changes occur
within the indicated throttling period, then these trap-
events must be suppressed by the agent. An NMS should
periodically check the value of ptopoLastChangeTime to
detect any missed ptopoConfigChange trap-events, e.g. due to
throttling or transmission loss.
If notification transmission is enabled, the suggested
default throttling period is 60 seconds, but transmission
should be disabled by default.
If the agent is capable of storing non-volatile
configuration, then the value of this object must be
restored after a re-initialization of the management
system."
DEFVAL { 0 }
::= { ptopoConfig 1 }
ptopoConfigMaxHoldTime OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the desired time interval for which
an agent will maintain dynamic ptopoConnEntries.
After the specified number of seconds since the last time an
entry was verified, in the absence of new verification
(e.g., receipt of a topology protocol message), the agent
shall remove the entry. Note that entries may not always be
removed immediately, but may possibly be removed at periodic
garbage collection intervals.
This object only affects dynamic ptopoConnEntries, i.e. for
which ptopoConnIsStatic equals 'false(2)'. Static entries
are not aged out.
Note that dynamic ptopoConnEntries may also be removed by
the agent due to the expired timeliness of learned topology
information (e.g., timeliness interval for a remote port
expires). The actual age-out interval for a given entry is
defined by the following formula:
age-out-time =
min(ptopoConfigMaxHoldTime, <entry-specific hold-time>)
where <entry-specific hold-time> is determined by the
discovery algorithm, and may be different for each entry."
DEFVAL { 300 }
::= { ptopoConfig 2 }
-- PTOPO MIB Notification Definitions
ptopoMIBNotifications OBJECT IDENTIFIER ::= { ptopoMIB 2 }
ptopoMIBTrapPrefix OBJECT IDENTIFIER ::=
{ ptopoMIBNotifications 0 }
ptopoConfigChange NOTIFICATION-TYPE
OBJECTS {
ptopoConnTabInserts,
ptopoConnTabDeletes,
ptopoConnTabDrops,
ptopoConnTabAgeouts
}
STATUS current
DESCRIPTION
"A ptopoConfigChange notification is sent when the value of
ptopoLastChangeTime changes. It can be utilized by an NMS to
trigger physical topology table maintenance polls.
Note that transmission of ptopoConfigChange notifications
are throttled by the agent, as specified by the
'ptopoConfigTrapInterval' object."
::= { ptopoMIBTrapPrefix 1 }
-- PTOPO Registration Points
ptopoRegistrationPoints OBJECT IDENTIFIER ::= { ptopoMIB 3 }
-- values used with ptopoConnDiscAlgorithm object
ptopoDiscoveryMechanisms OBJECT IDENTIFIER ::=
{ ptopoRegistrationPoints 1 }
ptopoDiscoveryLocal OBJECT IDENTIFIER ::=
{ ptopoDiscoveryMechanisms 1 }
-- conformance information
ptopoConformance OBJECT IDENTIFIER ::= { ptopoMIB 4 }
ptopoCompliances OBJECT IDENTIFIER ::= { ptopoConformance 1 }
ptopoGroups OBJECT IDENTIFIER ::= { ptopoConformance 2 }
-- compliance statements
ptopoCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement
the PTOPO MIB."
MODULE -- this module
MANDATORY-GROUPS {
ptopoDataGroup,
ptopoGeneralGroup,
ptopoConfigGroup,
ptopoNotificationsGroup
}
::= { ptopoCompliances 1 }
-- MIB groupings
ptopoDataGroup OBJECT-GROUP
OBJECTS {
ptopoConnRemoteChassisType,
ptopoConnRemoteChassis,
ptopoConnRemotePortType,
ptopoConnRemotePort,
ptopoConnDiscAlgorithm,
ptopoConnAgentNetAddrType,
ptopoConnAgentNetAddr,
ptopoConnMultiMacSASeen,
ptopoConnMultiNetSASeen,
ptopoConnIsStatic,
ptopoConnLastVerifyTime,
ptopoConnRowStatus
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent
physical topology information for which a single agent
provides management information.
This group is mandatory for all implementations of the PTOPO
MIB."
::= { ptopoGroups 1 }
ptopoGeneralGroup OBJECT-GROUP
OBJECTS {
ptopoLastChangeTime,
ptopoConnTabInserts,
ptopoConnTabDeletes,
ptopoConnTabDrops,
ptopoConnTabAgeouts
}
STATUS current
DESCRIPTION
"The collection of objects which are used to report the
general status of the PTOPO MIB implementation.
This group is mandatory for all agents which implement the
PTOPO MIB."
::= { ptopoGroups 2 }
ptopoConfigGroup OBJECT-GROUP
OBJECTS {
ptopoConfigTrapInterval,
ptopoConfigMaxHoldTime
}
STATUS current
DESCRIPTION
"The collection of objects which are used to configure the
PTOPO MIB implementation behavior.
This group is mandatory for agents which implement the PTOPO
MIB."
::= { ptopoGroups 3 }
ptopoNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ptopoConfigChange
}
STATUS current
DESCRIPTION
"The collection of notifications used to indicate PTOPO MIB
data consistency and general status information.
This group is mandatory for agents which implement the PTOPO
MIB."
::= { ptopoGroups 4 }
END