2361 lines
73 KiB
Plaintext
2361 lines
73 KiB
Plaintext
SONET-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Integer32, transmission
|
|
FROM SNMPv2-SMI
|
|
DisplayString, TruthValue
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
ifIndex
|
|
FROM IF-MIB
|
|
PerfCurrentCount, PerfIntervalCount
|
|
FROM PerfHist-TC-MIB;
|
|
|
|
-- This is the MIB module for the SONET/SDH Interface objects.
|
|
|
|
sonetMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200308110000Z"
|
|
ORGANIZATION "IETF AToM MIB Working Group"
|
|
CONTACT-INFO
|
|
"WG charter:
|
|
http://www.ietf.org/html.charters/atommib-charter.html
|
|
|
|
Mailing Lists:
|
|
General Discussion: atommib@research.telcordia.com
|
|
To Subscribe: atommib-request@research.telcordia.com
|
|
|
|
Kaj Tesink
|
|
Telcordia Technologies
|
|
Tel: (732) 758-5254
|
|
Fax: (732) 758-2269
|
|
E-mail: kaj@research.telcordia.com."
|
|
DESCRIPTION
|
|
"The MIB module to describe SONET/SDH interface objects.
|
|
|
|
Copyright (C) The Internet Society (2003). This version
|
|
of this MIB module is part of RFC 3592; see the RFC
|
|
itself for full legal notices."
|
|
REVISION "200308110000Z"
|
|
DESCRIPTION
|
|
"The key changes made to this MIB module
|
|
since its publication in RFC 2558
|
|
are as follows.
|
|
|
|
(1) Corrected typographical error
|
|
(bellcore1991(2) in sonetSESthresholdSet)
|
|
|
|
(2) Added support for sts192cSTM64(6) and
|
|
sts768cSTM256(7) in sonetPathCurrentWidth
|
|
|
|
(3) Corrected description of the applicability
|
|
of VTs for SDH for improved accuracy
|
|
|
|
(4) Added clarification in the SES description that
|
|
CV counts should be frozen during SESs
|
|
|
|
(5) Corrected typographical errors:
|
|
- Line Alarm Indication Signal description of the
|
|
Terminology section (20.5 --> 2.5 seconds)
|
|
- In the Terminology section
|
|
sonetSESThresholdSet --> sonetSESthresholdSet
|
|
"
|
|
REVISION "199810190000Z"
|
|
DESCRIPTION
|
|
"The RFC 2558 version of this MIB module.
|
|
The key changes made to this MIB module
|
|
since its initial publication in RFC 1595
|
|
are as follows.
|
|
|
|
(1) The MODULE-IDENTITY has been updated to reflect the
|
|
changes to the MIB.
|
|
|
|
(2) Where applicable, the textual conventions
|
|
PerfCurrentCount and PerfIntervalCount from
|
|
PerfHist-TC-MIB have been used in place of Gauge32.
|
|
|
|
(3) An agent now has the option to delay updates to
|
|
the various performance counts in lieu of performing
|
|
retroactive adjustments upon entering into or exiting
|
|
from unavailable time. This implementation option is
|
|
described in Appendix A of this memo.
|
|
|
|
(4) In order to make the SONET-MIB more useful for
|
|
circuit provisioning, the formerly read-only objects
|
|
sonetMediumType, sonetMediumLineCoding,
|
|
sonetMediumLineType, and sonetMediumCircuitIdentifier
|
|
have been given a MAX-ACCESS of read-write. The
|
|
MIN-ACCESS remains read-only.
|
|
|
|
(5) The DESCRIPTION clause for sonetMediumTimeElapsed has
|
|
been updated to describe its behaviour if the duration
|
|
of the current interval exceeds the maximum value.
|
|
|
|
(6) The DESCRIPTION clause for sonetMediumValidIntervals
|
|
has been updated to describe its behaviour when some
|
|
intervals may be unavailable, and the object
|
|
sonetMediumInvalidIntervals has been added to keep
|
|
count of the number of missing intervals (if any).
|
|
|
|
(7) The object sonetMediumLoopbackConfig has been added
|
|
to enable or disable loopback configurations.
|
|
|
|
(8) Because the error count thresholds for declaring
|
|
severely errored seconds that are specified in ANSI
|
|
T1.231-1993, ITU-T G.826-1995, and ANSI T1.231-1997
|
|
are all different from each other and from the thresholds
|
|
specified in RFC 1595, an enumerated INTEGER object
|
|
sonetSESthresholdSet has been added to allow an agent
|
|
to specify which threshold set is in use. Text has
|
|
been added to Section 3 stating that if this object is
|
|
not implemented the thresholds specified in RFC 1595
|
|
should be assumed, and the table containing those
|
|
thresholds has been moved to Appendix B of this memo.
|
|
(9) A column with SYNTAX TruthValue has been added to each
|
|
interval table. The purpose of the additional column
|
|
is to indicate, for each interval, whether the data
|
|
is valid in the sense intended by ANSI T1.231 clause
|
|
9.1.2.2 [T1.231a][T1.231b]. The objects in question are:
|
|
|
|
sonetSectionIntervalValidData
|
|
sonetLineIntervalValidData
|
|
sonetFarEndLineIntervalValidData
|
|
sonetPathIntervalValidData
|
|
sonetFarEndPathIntervalValidData
|
|
sonetVTIntervalValidData
|
|
sonetFarEndVTIntervalValidData
|
|
|
|
(10) The ranges for sonetPathCurrentStatus and
|
|
sonetVTCurrentStatus have been made consistent
|
|
with the DESCRIPTION clauses.
|
|
|
|
(11) The conformance information has been updated. Previous
|
|
conformance information from RFC 1595 has been
|
|
deprecated. Some typographical errors in the deprecated
|
|
section have been corrected in order to prevent
|
|
MIB compilation errors."
|
|
|
|
REVISION "199401030000Z"
|
|
DESCRIPTION
|
|
"The RFC 1595 version of this MIB module."
|
|
|
|
::= { transmission 39 }
|
|
|
|
-- This is the MIB module for the SONET/SDH objects
|
|
|
|
sonetObjects OBJECT IDENTIFIER ::= { sonetMIB 1 }
|
|
|
|
sonetObjectsPath OBJECT IDENTIFIER ::= { sonetMIB 2 }
|
|
|
|
sonetObjectsVT OBJECT IDENTIFIER ::= { sonetMIB 3 }
|
|
|
|
-- groups in the SONET/SDH MIB module
|
|
|
|
sonetMedium OBJECT IDENTIFIER ::= { sonetObjects 1 }
|
|
|
|
sonetSection OBJECT IDENTIFIER ::= { sonetObjects 2 }
|
|
|
|
sonetLine OBJECT IDENTIFIER ::= { sonetObjects 3 }
|
|
|
|
sonetFarEndLine OBJECT IDENTIFIER ::= { sonetObjects 4 }
|
|
|
|
sonetPath OBJECT IDENTIFIER ::= { sonetObjectsPath 1 }
|
|
|
|
sonetFarEndPath OBJECT IDENTIFIER ::= { sonetObjectsPath 2 }
|
|
|
|
sonetVT OBJECT IDENTIFIER ::= { sonetObjectsVT 1 }
|
|
|
|
sonetFarEndVT OBJECT IDENTIFIER ::= { sonetObjectsVT 2 }
|
|
|
|
-- the SONET/SDH Medium group
|
|
|
|
-- SONET/SDH interfaces for some applications may be electrical
|
|
-- interfaces and not optical interfaces. This group handles
|
|
-- the configuration information for both optical SONET/SDH
|
|
-- interfaces and electrical SONET/SDH interfaces.
|
|
|
|
sonetMediumTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetMediumEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Medium table."
|
|
::= { sonetMedium 1 }
|
|
|
|
sonetMediumEntry OBJECT-TYPE
|
|
SYNTAX SonetMediumEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Medium table."
|
|
INDEX { ifIndex }
|
|
::= { sonetMediumTable 1 }
|
|
|
|
SonetMediumEntry ::=
|
|
SEQUENCE {
|
|
sonetMediumType INTEGER,
|
|
sonetMediumTimeElapsed Integer32,
|
|
sonetMediumValidIntervals Integer32,
|
|
sonetMediumLineCoding INTEGER,
|
|
sonetMediumLineType INTEGER,
|
|
sonetMediumCircuitIdentifier DisplayString,
|
|
sonetMediumInvalidIntervals Integer32,
|
|
sonetMediumLoopbackConfig BITS
|
|
}
|
|
|
|
sonetMediumType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sonet(1),
|
|
sdh(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable identifies whether a SONET
|
|
or a SDH signal is used across this interface."
|
|
::= { sonetMediumEntry 1 }
|
|
|
|
sonetMediumTimeElapsed OBJECT-TYPE
|
|
SYNTAX Integer32 (1..900)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds, including partial seconds,
|
|
that have elapsed since the beginning of the current
|
|
measurement period. If, for some reason, such as an
|
|
adjustment in the system's time-of-day clock, the
|
|
current interval exceeds the maximum value, the
|
|
agent will return the maximum value."
|
|
::= { sonetMediumEntry 2 }
|
|
|
|
sonetMediumValidIntervals OBJECT-TYPE
|
|
SYNTAX Integer32 (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of previous 15-minute intervals
|
|
for which data was collected.
|
|
A SONET/SDH interface must be capable
|
|
of supporting at least n intervals.
|
|
The minimum value of n is 4.
|
|
The default of n is 32.
|
|
The maximum value of n is 96.
|
|
The value will be <n> unless the measurement was
|
|
(re-)started within the last (<n>*15) minutes, in which
|
|
case the value will be the number of complete 15
|
|
minute intervals for which the agent has at least
|
|
some data. In certain cases (e.g., in the case
|
|
where the agent is a proxy) it is possible that some
|
|
intervals are unavailable. In this case, this
|
|
interval is the maximum interval number for
|
|
which data is available. "
|
|
::= { sonetMediumEntry 3 }
|
|
|
|
sonetMediumLineCoding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sonetMediumOther(1),
|
|
sonetMediumB3ZS(2),
|
|
sonetMediumCMI(3),
|
|
sonetMediumNRZ(4),
|
|
sonetMediumRZ(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable describes the line coding for
|
|
this interface. The B3ZS and CMI are used for
|
|
electrical SONET/SDH signals (STS-1 and STS-3).
|
|
The Non-Return to Zero (NRZ) and the Return
|
|
to Zero are used for optical SONET/SDH signals."
|
|
::= { sonetMediumEntry 4 }
|
|
|
|
sonetMediumLineType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sonetOther(1),
|
|
sonetShortSingleMode(2),
|
|
sonetLongSingleMode(3),
|
|
sonetMultiMode(4),
|
|
sonetCoax(5),
|
|
sonetUTP(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable describes the line type for
|
|
this interface. The line types are
|
|
Short and Long Range
|
|
Single Mode fiber or Multi-Mode fiber interfaces,
|
|
and coax and UTP for electrical interfaces. The
|
|
value sonetOther should be used when the Line Type is
|
|
not one of the listed values."
|
|
::= { sonetMediumEntry 5 }
|
|
|
|
sonetMediumCircuitIdentifier OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable contains the transmission
|
|
vendor's circuit identifier, for the
|
|
purpose of facilitating troubleshooting.
|
|
Note that the circuit identifier, if available,
|
|
is also represented by ifPhysAddress."
|
|
::= { sonetMediumEntry 6 }
|
|
|
|
sonetMediumInvalidIntervals OBJECT-TYPE
|
|
SYNTAX Integer32 (0..96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of intervals in the range from
|
|
0 to sonetMediumValidIntervals for which no
|
|
data is available. This object will typically
|
|
be zero except in cases where the data for some
|
|
intervals are not available (e.g., in proxy
|
|
situations)."
|
|
::= { sonetMediumEntry 7 }
|
|
|
|
sonetMediumLoopbackConfig OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
sonetNoLoop(0),
|
|
sonetFacilityLoop(1),
|
|
sonetTerminalLoop(2),
|
|
sonetOtherLoop(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current loopback state of the SONET/SDH interface. The
|
|
values mean:
|
|
|
|
sonetNoLoop
|
|
Not in the loopback state. A device that is not
|
|
capable of performing a loopback on this interface
|
|
shall always return this value.
|
|
|
|
sonetFacilityLoop
|
|
The received signal at this interface is looped back
|
|
out through the corresponding transmitter in the return
|
|
direction.
|
|
|
|
sonetTerminalLoop
|
|
The signal that is about to be transmitted is connected
|
|
to the associated incoming receiver.
|
|
|
|
sonetOtherLoop
|
|
Loopbacks that are not defined here."
|
|
|
|
::= { sonetMediumEntry 8 }
|
|
|
|
sonetSESthresholdSet OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
bellcore1991(2),
|
|
ansi1993(3),
|
|
itu1995(4),
|
|
ansi1997(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated integer indicating which
|
|
recognized set of SES thresholds that
|
|
the agent uses for determining severely
|
|
errored seconds and unavailable time.
|
|
|
|
other(1)
|
|
None of the following.
|
|
|
|
bellcore1991(2)
|
|
Bellcore TR-NWT-000253, 1991 [TR253], or
|
|
ANSI T1M1.3/93-005R2, 1993 [T1M1.3].
|
|
See also Appendix B.
|
|
|
|
ansi1993(3)
|
|
ANSI T1.231, 1993 [T1.231a], or
|
|
Bellcore GR-253-CORE, Issue 2, 1995 [GR253]
|
|
|
|
itu1995(4)
|
|
ITU Recommendation G.826, 1995 [G.826]
|
|
|
|
ansi1997(5)
|
|
ANSI T1.231, 1997 [T1.231b]
|
|
|
|
If a manager changes the value of this
|
|
object then the SES statistics collected
|
|
prior to this change must be invalidated."
|
|
::= { sonetMedium 2 }
|
|
|
|
-- the SONET/SDH Section group
|
|
|
|
-- this group consists of 2 tables:
|
|
-- - the SONET/SDH Section Current Table
|
|
-- - the SONET/SDH Section Interval Table
|
|
|
|
-- the SONET/SDH Section Current Table
|
|
|
|
-- The SONET/SDH Section
|
|
-- current table contains various statistics
|
|
-- being collected for the current 15 minute interval.
|
|
|
|
|
|
sonetSectionCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetSectionCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Section Current table."
|
|
::= { sonetSection 1 }
|
|
|
|
sonetSectionCurrentEntry OBJECT-TYPE
|
|
SYNTAX SonetSectionCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Section Current table."
|
|
INDEX { ifIndex }
|
|
::= { sonetSectionCurrentTable 1 }
|
|
|
|
SonetSectionCurrentEntry ::=
|
|
SEQUENCE {
|
|
sonetSectionCurrentStatus Integer32,
|
|
sonetSectionCurrentESs PerfCurrentCount,
|
|
sonetSectionCurrentSESs PerfCurrentCount,
|
|
sonetSectionCurrentSEFSs PerfCurrentCount,
|
|
sonetSectionCurrentCVs PerfCurrentCount
|
|
}
|
|
|
|
sonetSectionCurrentStatus OBJECT-TYPE
|
|
SYNTAX Integer32 (1..6)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the
|
|
status of the interface.
|
|
The sonetSectionCurrentStatus
|
|
is a bit map represented
|
|
as a sum, therefore,
|
|
it can represent multiple defects
|
|
simultaneously.
|
|
The sonetSectionNoDefect should be
|
|
set if and only if
|
|
no other flag is set.
|
|
|
|
The various bit positions are:
|
|
1 sonetSectionNoDefect
|
|
2 sonetSectionLOS
|
|
4 sonetSectionLOF"
|
|
::= { sonetSectionCurrentEntry 1 }
|
|
|
|
sonetSectionCurrentESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Errored
|
|
Seconds encountered by a SONET/SDH
|
|
Section in the current 15 minute interval."
|
|
::= { sonetSectionCurrentEntry 2 }
|
|
|
|
sonetSectionCurrentSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Seconds
|
|
encountered by a SONET/SDH Section in the current 15
|
|
minute interval."
|
|
::= { sonetSectionCurrentEntry 3 }
|
|
|
|
sonetSectionCurrentSEFSs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Framing Seconds
|
|
encountered by a SONET/SDH Section in the current
|
|
15 minute interval."
|
|
::= { sonetSectionCurrentEntry 4 }
|
|
|
|
sonetSectionCurrentCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Coding
|
|
Violations encountered by a
|
|
SONET/SDH Section in the current 15 minute interval."
|
|
::= { sonetSectionCurrentEntry 5 }
|
|
|
|
-- the SONET/SDH Section Interval Table
|
|
|
|
-- The SONET/SDH Section Interval Table
|
|
-- contains various statistics
|
|
-- collected by each system over a maximum
|
|
-- of the previous 24 hours of
|
|
-- operation. The past 24 hours may be broken into 96
|
|
-- completed 15 minute intervals.
|
|
-- A system is required to store at
|
|
-- least 4 completed 15 minute interval.
|
|
-- The default value is 32 intervals.
|
|
|
|
sonetSectionIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetSectionIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Section Interval table."
|
|
::= { sonetSection 2 }
|
|
|
|
sonetSectionIntervalEntry OBJECT-TYPE
|
|
SYNTAX SonetSectionIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Section Interval table."
|
|
INDEX { ifIndex,
|
|
sonetSectionIntervalNumber }
|
|
::= { sonetSectionIntervalTable 1 }
|
|
|
|
SonetSectionIntervalEntry ::=
|
|
SEQUENCE {
|
|
sonetSectionIntervalNumber Integer32,
|
|
sonetSectionIntervalESs PerfIntervalCount,
|
|
sonetSectionIntervalSESs PerfIntervalCount,
|
|
sonetSectionIntervalSEFSs PerfIntervalCount,
|
|
sonetSectionIntervalCVs PerfIntervalCount,
|
|
sonetSectionIntervalValidData TruthValue
|
|
}
|
|
|
|
sonetSectionIntervalNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, which identifies the
|
|
interval for which the set of statistics is available.
|
|
The interval identified by 1 is the most recently
|
|
completed 15 minute interval,
|
|
and the interval identified
|
|
by N is the interval immediately preceding the
|
|
one identified
|
|
by N-1."
|
|
::= { sonetSectionIntervalEntry 1 }
|
|
|
|
sonetSectionIntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Errored Seconds encountered
|
|
by a SONET/SDH Section in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetSectionIntervalEntry 2 }
|
|
|
|
sonetSectionIntervalSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Seconds
|
|
encountered by a SONET/SDH Section in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetSectionIntervalEntry 3 }
|
|
|
|
sonetSectionIntervalSEFSs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Framing Seconds
|
|
encountered by a SONET/SDH Section in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetSectionIntervalEntry 4 }
|
|
|
|
sonetSectionIntervalCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Coding
|
|
Violations encountered by a
|
|
SONET/SDH Section in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetSectionIntervalEntry 5 }
|
|
|
|
|
|
sonetSectionIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { sonetSectionIntervalEntry 6 }
|
|
|
|
-- the SONET/SDH Line group
|
|
|
|
-- this group consists of 2 tables:
|
|
-- - the SONET/SDH Line Current Table
|
|
-- - the SONET/SDH Line Interval Table
|
|
|
|
-- the SONET/SDH Line Current Table
|
|
|
|
-- The SONET/SDH Line
|
|
-- current table contains various statistics
|
|
-- being collected for the current 15 minute interval.
|
|
|
|
sonetLineCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetLineCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Line Current table."
|
|
::= { sonetLine 1 }
|
|
|
|
sonetLineCurrentEntry OBJECT-TYPE
|
|
SYNTAX SonetLineCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Line Current table."
|
|
INDEX { ifIndex }
|
|
::= { sonetLineCurrentTable 1 }
|
|
|
|
SonetLineCurrentEntry ::=
|
|
SEQUENCE {
|
|
sonetLineCurrentStatus Integer32,
|
|
sonetLineCurrentESs PerfCurrentCount,
|
|
sonetLineCurrentSESs PerfCurrentCount,
|
|
sonetLineCurrentCVs PerfCurrentCount,
|
|
sonetLineCurrentUASs PerfCurrentCount
|
|
}
|
|
|
|
|
|
sonetLineCurrentStatus OBJECT-TYPE
|
|
SYNTAX Integer32 (1..6)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the
|
|
status of the interface.
|
|
The sonetLineCurrentStatus
|
|
is a bit map represented
|
|
as a sum, therefore,
|
|
it can represent multiple defects
|
|
simultaneously.
|
|
The sonetLineNoDefect should be
|
|
set if and only if
|
|
no other flag is set.
|
|
|
|
The various bit positions are:
|
|
1 sonetLineNoDefect
|
|
2 sonetLineAIS
|
|
4 sonetLineRDI"
|
|
::= { sonetLineCurrentEntry 1 }
|
|
|
|
sonetLineCurrentESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Errored
|
|
Seconds encountered by a SONET/SDH
|
|
Line in the current 15 minute interval."
|
|
::= { sonetLineCurrentEntry 2 }
|
|
|
|
sonetLineCurrentSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Seconds
|
|
encountered by a SONET/SDH Line in the current 15
|
|
minute
|
|
interval."
|
|
::= { sonetLineCurrentEntry 3 }
|
|
|
|
sonetLineCurrentCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Coding
|
|
Violations encountered by a
|
|
SONET/SDH Line in the current 15 minute interval."
|
|
::= { sonetLineCurrentEntry 4 }
|
|
|
|
sonetLineCurrentUASs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Unavailable Seconds
|
|
encountered by a SONET/SDH Line in the current 15
|
|
minute
|
|
interval."
|
|
::= { sonetLineCurrentEntry 5 }
|
|
|
|
-- the SONET/SDH Line Interval Table
|
|
|
|
-- The SONET/SDH Line Interval Table
|
|
-- contains various statistics
|
|
-- collected by each system over a maximum
|
|
-- of the previous 24 hours of
|
|
-- operation. The past 24 hours may be broken into 96
|
|
-- completed 15 minute intervals.
|
|
-- A system is required to store at
|
|
-- least 4 completed 15 minute interval.
|
|
-- The default value is 32 intervals.
|
|
|
|
sonetLineIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetLineIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Line Interval table."
|
|
::= { sonetLine 2 }
|
|
|
|
sonetLineIntervalEntry OBJECT-TYPE
|
|
SYNTAX SonetLineIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Line Interval table."
|
|
INDEX { ifIndex,
|
|
sonetLineIntervalNumber }
|
|
::= { sonetLineIntervalTable 1 }
|
|
|
|
SonetLineIntervalEntry ::=
|
|
SEQUENCE {
|
|
sonetLineIntervalNumber Integer32,
|
|
sonetLineIntervalESs PerfIntervalCount,
|
|
sonetLineIntervalSESs PerfIntervalCount,
|
|
sonetLineIntervalCVs PerfIntervalCount,
|
|
sonetLineIntervalUASs PerfIntervalCount,
|
|
sonetLineIntervalValidData TruthValue
|
|
}
|
|
|
|
sonetLineIntervalNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, which identifies the
|
|
interval for which the set of statistics is available.
|
|
The interval identified by 1 is the most recently
|
|
completed 15 minute interval,
|
|
and the interval identified
|
|
by N is the interval immediately preceding the
|
|
one identified
|
|
by N-1."
|
|
::= { sonetLineIntervalEntry 1 }
|
|
|
|
sonetLineIntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Errored Seconds encountered
|
|
by a SONET/SDH Line in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetLineIntervalEntry 2 }
|
|
|
|
sonetLineIntervalSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Seconds
|
|
encountered by a SONET/SDH Line in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetLineIntervalEntry 3 }
|
|
|
|
sonetLineIntervalCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Coding
|
|
Violations encountered by a
|
|
SONET/SDH Line in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetLineIntervalEntry 4 }
|
|
|
|
sonetLineIntervalUASs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the
|
|
number of Unavailable Seconds
|
|
encountered by a SONET/SDH Line in
|
|
a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetLineIntervalEntry 5 }
|
|
|
|
sonetLineIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { sonetLineIntervalEntry 6 }
|
|
|
|
-- The SONET/SDH Far End Line group.
|
|
-- This group may only be implemented by SONET/SDH (LTEs)
|
|
-- systems that provide for a far end block error (FEBE)
|
|
-- information at the SONET/SDH Line Layer.
|
|
|
|
-- This group consists of two tables:
|
|
-- SONET/SDH Far End Line Current Table
|
|
-- SONET/SDH Far End Line Interval Table
|
|
|
|
-- The SONET/SDH Far End Line Current Table
|
|
|
|
-- The SONET/SDH Far End Line Current table contains
|
|
-- various statistics being
|
|
-- collected for the current 15 minute interval.
|
|
-- The statistics are collected from the far end
|
|
-- block error code (FEBE)
|
|
-- within the third Z2 byte of the Line Overhead
|
|
-- in Broadband ISDN applications.
|
|
-- The definitions are the same as described for
|
|
-- the near-end information.
|
|
|
|
sonetFarEndLineCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetFarEndLineCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Far End Line Current table."
|
|
::= { sonetFarEndLine 1 }
|
|
|
|
sonetFarEndLineCurrentEntry OBJECT-TYPE
|
|
SYNTAX SonetFarEndLineCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Far End Line Current table."
|
|
INDEX { ifIndex }
|
|
::= { sonetFarEndLineCurrentTable 1 }
|
|
|
|
SonetFarEndLineCurrentEntry ::=
|
|
SEQUENCE {
|
|
sonetFarEndLineCurrentESs PerfCurrentCount,
|
|
sonetFarEndLineCurrentSESs PerfCurrentCount,
|
|
sonetFarEndLineCurrentCVs PerfCurrentCount,
|
|
sonetFarEndLineCurrentUASs PerfCurrentCount
|
|
}
|
|
|
|
sonetFarEndLineCurrentESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Far
|
|
End Errored Seconds encountered by a SONET/SDH
|
|
interface in the current 15 minute interval."
|
|
::= { sonetFarEndLineCurrentEntry 1 }
|
|
|
|
sonetFarEndLineCurrentSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Severely Errored Seconds
|
|
encountered by a SONET/SDH Medium/Section/Line
|
|
interface in the current 15 minute
|
|
interval."
|
|
::= { sonetFarEndLineCurrentEntry 2 }
|
|
|
|
sonetFarEndLineCurrentCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Coding Violations reported via
|
|
the far end block error count
|
|
encountered by a
|
|
SONET/SDH Medium/Section/Line
|
|
interface in the current 15 minute interval."
|
|
::= { sonetFarEndLineCurrentEntry 3 }
|
|
|
|
sonetFarEndLineCurrentUASs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Unavailable Seconds
|
|
encountered by a
|
|
SONET/SDH Medium/Section/Line
|
|
interface in the current 15 minute interval."
|
|
::= { sonetFarEndLineCurrentEntry 4 }
|
|
|
|
-- The SONET/SDH Far End Line Interval Table
|
|
|
|
-- The SONET/SDH Far End Line Interval Table
|
|
-- contains various statistics
|
|
-- collected by each system over a maximum
|
|
-- of the previous 24 hours of
|
|
-- operation. The past 24 hours may be broken into 96
|
|
-- completed 15 minute intervals.
|
|
-- A system is required to store at
|
|
-- least 4 completed 15 minute interval.
|
|
-- The default value is 32 intervals.
|
|
|
|
sonetFarEndLineIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetFarEndLineIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Far End Line Interval table."
|
|
::= { sonetFarEndLine 2 }
|
|
|
|
sonetFarEndLineIntervalEntry OBJECT-TYPE
|
|
SYNTAX SonetFarEndLineIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Far
|
|
End Line Interval table."
|
|
INDEX { ifIndex,
|
|
sonetFarEndLineIntervalNumber }
|
|
::= { sonetFarEndLineIntervalTable 1 }
|
|
|
|
SonetFarEndLineIntervalEntry ::=
|
|
SEQUENCE {
|
|
sonetFarEndLineIntervalNumber Integer32,
|
|
sonetFarEndLineIntervalESs PerfIntervalCount,
|
|
sonetFarEndLineIntervalSESs PerfIntervalCount,
|
|
sonetFarEndLineIntervalCVs PerfIntervalCount,
|
|
sonetFarEndLineIntervalUASs PerfIntervalCount,
|
|
sonetFarEndLineIntervalValidData TruthValue
|
|
}
|
|
|
|
sonetFarEndLineIntervalNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, which identifies the
|
|
interval for which the set of statistics is available.
|
|
The interval identified by 1 is the most recently
|
|
completed 15 minute interval,
|
|
and the interval identified
|
|
by N is the interval immediately preceding the
|
|
one identified
|
|
by N-1."
|
|
::= { sonetFarEndLineIntervalEntry 1 }
|
|
|
|
sonetFarEndLineIntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Errored Seconds encountered
|
|
by a SONET/SDH Line
|
|
interface in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndLineIntervalEntry 2 }
|
|
|
|
sonetFarEndLineIntervalSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Severely Errored Seconds
|
|
encountered by a SONET/SDH Line
|
|
interface in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndLineIntervalEntry 3 }
|
|
|
|
sonetFarEndLineIntervalCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Coding Violations reported via
|
|
the far end block error count
|
|
encountered by a
|
|
SONET/SDH Line
|
|
interface in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndLineIntervalEntry 4 }
|
|
|
|
sonetFarEndLineIntervalUASs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Unavailable Seconds
|
|
encountered by a
|
|
SONET/SDH Line
|
|
interface in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndLineIntervalEntry 5 }
|
|
|
|
sonetFarEndLineIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { sonetFarEndLineIntervalEntry 6 }
|
|
|
|
-- the SONET/SDH Path group
|
|
|
|
-- this group consists of 2 tables:
|
|
-- - the SONET/SDH Path Current Table
|
|
-- - the SONET/SDH Path Interval Table
|
|
|
|
-- the SONET/SDH Path Current Table
|
|
|
|
-- The SONET/SDH Path
|
|
-- current table contains various statistics
|
|
-- being collected for the current 15 minute interval.
|
|
|
|
sonetPathCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetPathCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Path Current table."
|
|
::= { sonetPath 1 }
|
|
|
|
sonetPathCurrentEntry OBJECT-TYPE
|
|
SYNTAX SonetPathCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Path Current table."
|
|
INDEX { ifIndex }
|
|
::= { sonetPathCurrentTable 1 }
|
|
|
|
SonetPathCurrentEntry ::=
|
|
SEQUENCE {
|
|
sonetPathCurrentWidth INTEGER,
|
|
sonetPathCurrentStatus Integer32,
|
|
sonetPathCurrentESs PerfCurrentCount,
|
|
sonetPathCurrentSESs PerfCurrentCount,
|
|
sonetPathCurrentCVs PerfCurrentCount,
|
|
sonetPathCurrentUASs PerfCurrentCount
|
|
}
|
|
|
|
sonetPathCurrentWidth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sts1(1),
|
|
sts3cSTM1(2),
|
|
sts12cSTM4(3),
|
|
sts24c(4),
|
|
sts48cSTM16(5),
|
|
sts192cSTM64(6),
|
|
sts768cSTM256(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that indicates the type of the SONET/SDH
|
|
Path. For SONET, the assigned types are
|
|
the STS-Nc SPEs, where N = 1, 3, 12, 24, 48, 192 and 768.
|
|
STS-1 is equal to 51.84 Mbps. For SDH, the assigned
|
|
types are the STM-Nc VCs, where N = 1, 4, 16, 64 and 256."
|
|
::= { sonetPathCurrentEntry 1 }
|
|
|
|
sonetPathCurrentStatus OBJECT-TYPE
|
|
SYNTAX Integer32 (1..62)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the
|
|
status of the interface.
|
|
The sonetPathCurrentStatus
|
|
is a bit map represented
|
|
as a sum, therefore,
|
|
it can represent multiple defects
|
|
simultaneously.
|
|
The sonetPathNoDefect should be
|
|
set if and only if
|
|
no other flag is set.
|
|
|
|
The various bit positions are:
|
|
1 sonetPathNoDefect
|
|
2 sonetPathSTSLOP
|
|
4 sonetPathSTSAIS
|
|
8 sonetPathSTSRDI
|
|
16 sonetPathUnequipped
|
|
32 sonetPathSignalLabelMismatch"
|
|
::= { sonetPathCurrentEntry 2 }
|
|
|
|
sonetPathCurrentESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Errored
|
|
Seconds encountered by a SONET/SDH
|
|
Path in the current 15 minute interval."
|
|
::= { sonetPathCurrentEntry 3 }
|
|
|
|
sonetPathCurrentSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Seconds
|
|
encountered by a SONET/SDH Path in the current 15
|
|
minute
|
|
interval."
|
|
::= { sonetPathCurrentEntry 4 }
|
|
|
|
sonetPathCurrentCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Coding
|
|
Violations encountered by a
|
|
SONET/SDH Path in the current 15 minute interval."
|
|
::= { sonetPathCurrentEntry 5 }
|
|
|
|
sonetPathCurrentUASs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Unavailable Seconds
|
|
encountered by a Path in the current
|
|
15 minute interval."
|
|
::= { sonetPathCurrentEntry 6 }
|
|
|
|
-- the SONET/SDH Path Interval Table
|
|
|
|
-- The SONET/SDH Path Interval Table
|
|
-- contains various statistics
|
|
-- collected by each system over a maximum
|
|
-- of the previous 24 hours of
|
|
-- operation. The past 24 hours may be broken into 96
|
|
-- completed 15 minute intervals.
|
|
-- A system is required to store at
|
|
-- least 4 completed 15 minute interval.
|
|
-- The default value is 32 intervals.
|
|
|
|
|
|
|
|
|
|
sonetPathIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetPathIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Path Interval table."
|
|
::= { sonetPath 2 }
|
|
|
|
sonetPathIntervalEntry OBJECT-TYPE
|
|
SYNTAX SonetPathIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Path Interval table."
|
|
INDEX { ifIndex,
|
|
sonetPathIntervalNumber }
|
|
::= { sonetPathIntervalTable 1 }
|
|
|
|
SonetPathIntervalEntry ::=
|
|
SEQUENCE {
|
|
sonetPathIntervalNumber Integer32,
|
|
sonetPathIntervalESs PerfIntervalCount,
|
|
sonetPathIntervalSESs PerfIntervalCount,
|
|
sonetPathIntervalCVs PerfIntervalCount,
|
|
sonetPathIntervalUASs PerfIntervalCount,
|
|
sonetPathIntervalValidData TruthValue
|
|
}
|
|
|
|
sonetPathIntervalNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, which identifies the
|
|
interval for which the set of statistics is available.
|
|
The interval identified by 1 is the most recently
|
|
completed 15 minute interval,
|
|
and the interval identified
|
|
by N is the interval immediately preceding the
|
|
one identified
|
|
by N-1."
|
|
::= { sonetPathIntervalEntry 1 }
|
|
|
|
sonetPathIntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Errored Seconds encountered
|
|
by a SONET/SDH Path in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetPathIntervalEntry 2 }
|
|
|
|
sonetPathIntervalSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Seconds
|
|
encountered by a SONET/SDH Path in
|
|
a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetPathIntervalEntry 3 }
|
|
|
|
sonetPathIntervalCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Coding
|
|
Violations encountered by a
|
|
SONET/SDH Path in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetPathIntervalEntry 4 }
|
|
|
|
sonetPathIntervalUASs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Unavailable Seconds
|
|
encountered by a Path in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetPathIntervalEntry 5 }
|
|
|
|
sonetPathIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { sonetPathIntervalEntry 6 }
|
|
|
|
-- The SONET/SDH Far End Path group
|
|
|
|
-- This group consists of two tables:
|
|
-- - SONET/SDH Far End Path Current Table
|
|
-- - SONET/SDH Far End Path Interval Table
|
|
|
|
-- The SONET/SDH Far End Path Current Table
|
|
|
|
-- The SONET/SDH Far End Path Current table
|
|
-- contains various statistics
|
|
-- being collected for the current 15 minute interval.
|
|
-- The statistics are collected from
|
|
-- the far end block error code
|
|
-- (FEBE) within the G1 byte of the Path Overhead.
|
|
-- The definitions are the same as described for
|
|
-- the near-end information.
|
|
|
|
sonetFarEndPathCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetFarEndPathCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Far End Path Current table."
|
|
::= { sonetFarEndPath 1 }
|
|
|
|
sonetFarEndPathCurrentEntry OBJECT-TYPE
|
|
SYNTAX SonetFarEndPathCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Far End Path Current table."
|
|
INDEX { ifIndex }
|
|
::= { sonetFarEndPathCurrentTable 1 }
|
|
|
|
SonetFarEndPathCurrentEntry ::=
|
|
SEQUENCE {
|
|
sonetFarEndPathCurrentESs PerfCurrentCount,
|
|
sonetFarEndPathCurrentSESs PerfCurrentCount,
|
|
sonetFarEndPathCurrentCVs PerfCurrentCount,
|
|
sonetFarEndPathCurrentUASs PerfCurrentCount
|
|
}
|
|
|
|
sonetFarEndPathCurrentESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Far
|
|
End Errored Seconds encountered by a SONET/SDH
|
|
interface in the current 15 minute interval."
|
|
::= { sonetFarEndPathCurrentEntry 1 }
|
|
|
|
sonetFarEndPathCurrentSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Severely Errored Seconds
|
|
encountered by a SONET/SDH Path
|
|
interface in the current 15 minute
|
|
interval."
|
|
::= { sonetFarEndPathCurrentEntry 2 }
|
|
|
|
sonetFarEndPathCurrentCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Coding Violations reported via
|
|
the far end block error count
|
|
encountered by a
|
|
SONET/SDH Path interface in
|
|
the current 15 minute interval."
|
|
::= { sonetFarEndPathCurrentEntry 3 }
|
|
|
|
sonetFarEndPathCurrentUASs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Unavailable Seconds
|
|
encountered by a
|
|
SONET/SDH Path interface in
|
|
the current 15 minute interval."
|
|
::= { sonetFarEndPathCurrentEntry 4 }
|
|
|
|
|
|
-- The SONET/SDH Far End Path Interval Table
|
|
|
|
-- The SONET/SDH Far End Path Interval Table
|
|
-- contains various statistics
|
|
-- collected by each system over a maximum
|
|
-- of the previous 24 hours of
|
|
-- operation. The past 24 hours may be broken into 96
|
|
-- completed 15 minute intervals.
|
|
-- A system is required to store at
|
|
-- least 4 completed 15 minute interval.
|
|
-- The default value is 32 intervals.
|
|
|
|
sonetFarEndPathIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetFarEndPathIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Far End Path Interval table."
|
|
::= { sonetFarEndPath 2 }
|
|
|
|
sonetFarEndPathIntervalEntry OBJECT-TYPE
|
|
SYNTAX SonetFarEndPathIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Far
|
|
End Path Interval table."
|
|
INDEX { ifIndex,
|
|
sonetFarEndPathIntervalNumber }
|
|
::= { sonetFarEndPathIntervalTable 1 }
|
|
|
|
SonetFarEndPathIntervalEntry ::=
|
|
SEQUENCE {
|
|
sonetFarEndPathIntervalNumber Integer32,
|
|
sonetFarEndPathIntervalESs PerfIntervalCount,
|
|
sonetFarEndPathIntervalSESs PerfIntervalCount,
|
|
sonetFarEndPathIntervalCVs PerfIntervalCount,
|
|
sonetFarEndPathIntervalUASs PerfIntervalCount,
|
|
sonetFarEndPathIntervalValidData TruthValue
|
|
}
|
|
|
|
sonetFarEndPathIntervalNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, which identifies the
|
|
interval for which the set of statistics is available.
|
|
The interval identified by 1 is the most recently
|
|
completed 15 minute interval,
|
|
and the interval identified
|
|
by N is the interval immediately preceding the
|
|
one identified
|
|
by N-1."
|
|
::= { sonetFarEndPathIntervalEntry 1 }
|
|
|
|
sonetFarEndPathIntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Errored Seconds encountered
|
|
by a SONET/SDH Path interface in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndPathIntervalEntry 2 }
|
|
|
|
sonetFarEndPathIntervalSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Severely Errored Seconds
|
|
encountered by a SONET/SDH Path interface
|
|
in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndPathIntervalEntry 3 }
|
|
|
|
sonetFarEndPathIntervalCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Coding Violations reported via
|
|
the far end block error count
|
|
encountered by a
|
|
SONET/SDH Path interface
|
|
in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndPathIntervalEntry 4 }
|
|
|
|
sonetFarEndPathIntervalUASs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Unavailable Seconds
|
|
encountered by a
|
|
SONET/SDH Path interface in
|
|
a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndPathIntervalEntry 5 }
|
|
|
|
sonetFarEndPathIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { sonetFarEndPathIntervalEntry 6 }
|
|
|
|
-- the SONET/SDH Virtual Tributary group
|
|
|
|
-- this group consists of 2 tables:
|
|
-- - the SONET/SDH VT Current Table
|
|
-- - the SONET/SDH VT Interval Table
|
|
|
|
-- Corresponding SDH signals for SONET VTs are
|
|
-- as follows:
|
|
|
|
-- A VT1.5 = TU11
|
|
-- A VT2 = TU12
|
|
-- A VT3 = none
|
|
-- none = TU3
|
|
-- A VT6 = TU2
|
|
|
|
-- the SONET/SDH VT Current Table
|
|
|
|
-- The SONET/SDH VT current table
|
|
-- contains various statistics
|
|
-- being collected for the
|
|
-- current 15 minute interval.
|
|
|
|
sonetVTCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetVTCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH VT Current table."
|
|
::= { sonetVT 1 }
|
|
|
|
sonetVTCurrentEntry OBJECT-TYPE
|
|
SYNTAX SonetVTCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH VT Current table."
|
|
INDEX { ifIndex }
|
|
::= { sonetVTCurrentTable 1 }
|
|
|
|
SonetVTCurrentEntry ::=
|
|
SEQUENCE {
|
|
sonetVTCurrentWidth INTEGER,
|
|
sonetVTCurrentStatus Integer32,
|
|
sonetVTCurrentESs PerfCurrentCount,
|
|
sonetVTCurrentSESs PerfCurrentCount,
|
|
sonetVTCurrentCVs PerfCurrentCount,
|
|
sonetVTCurrentUASs PerfCurrentCount
|
|
}
|
|
|
|
sonetVTCurrentWidth OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
vtWidth15VC11(1),
|
|
vtWidth2VC12(2),
|
|
vtWidth3(3),
|
|
vtWidth6VC2(4),
|
|
vtWidth6c(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that indicates the type of the SONET
|
|
VT and SDH VC. Assigned widths are
|
|
VT1.5/VC11, VT2/VC12, VT3, VT6/VC2, and VT6c."
|
|
::= { sonetVTCurrentEntry 1 }
|
|
|
|
sonetVTCurrentStatus OBJECT-TYPE
|
|
SYNTAX Integer32 (1..126)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the
|
|
status of the interface.
|
|
The sonetVTCurrentStatus
|
|
is a bit map represented
|
|
as a sum, therefore,
|
|
it can represent multiple defects
|
|
and failures
|
|
simultaneously.
|
|
The sonetVTNoDefect should be
|
|
set if and only if
|
|
no other flag is set.
|
|
|
|
The various bit positions are:
|
|
1 sonetVTNoDefect
|
|
2 sonetVTLOP
|
|
4 sonetVTPathAIS
|
|
8 sonetVTPathRDI
|
|
16 sonetVTPathRFI
|
|
32 sonetVTUnequipped
|
|
64 sonetVTSignalLabelMismatch"
|
|
::= { sonetVTCurrentEntry 2 }
|
|
|
|
sonetVTCurrentESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Errored
|
|
Seconds encountered by a SONET/SDH
|
|
VT in the current 15 minute interval."
|
|
::= { sonetVTCurrentEntry 3 }
|
|
|
|
sonetVTCurrentSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Seconds
|
|
encountered by a SONET/SDH VT in the current 15 minute
|
|
interval."
|
|
::= { sonetVTCurrentEntry 4 }
|
|
|
|
sonetVTCurrentCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Coding
|
|
Violations encountered by a
|
|
SONET/SDH VT in the current 15 minute interval."
|
|
::= { sonetVTCurrentEntry 5 }
|
|
|
|
sonetVTCurrentUASs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Unavailable Seconds
|
|
encountered by a VT in the current
|
|
15 minute interval."
|
|
::= { sonetVTCurrentEntry 6 }
|
|
|
|
-- the SONET/SDH VT Interval Table
|
|
|
|
-- The SONET/SDH VT Interval Table
|
|
-- contains various statistics
|
|
-- collected by each system over a maximum
|
|
-- of the previous 24 hours of
|
|
-- operation. The past 24 hours may be broken into 96
|
|
-- completed 15 minute intervals.
|
|
-- A system is required to store at
|
|
-- least 4 completed 15 minute interval.
|
|
-- The default value is 32 intervals.
|
|
|
|
sonetVTIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetVTIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH VT Interval table."
|
|
::= { sonetVT 2 }
|
|
|
|
sonetVTIntervalEntry OBJECT-TYPE
|
|
SYNTAX SonetVTIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH VT Interval table."
|
|
INDEX { ifIndex,
|
|
sonetVTIntervalNumber }
|
|
::= { sonetVTIntervalTable 1 }
|
|
|
|
SonetVTIntervalEntry ::=
|
|
SEQUENCE {
|
|
sonetVTIntervalNumber Integer32,
|
|
sonetVTIntervalESs PerfIntervalCount,
|
|
sonetVTIntervalSESs PerfIntervalCount,
|
|
sonetVTIntervalCVs PerfIntervalCount,
|
|
sonetVTIntervalUASs PerfIntervalCount,
|
|
sonetVTIntervalValidData TruthValue
|
|
}
|
|
|
|
sonetVTIntervalNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, which identifies the
|
|
interval for which the set of statistics is available.
|
|
The interval identified by 1 is the most recently
|
|
completed 15 minute interval,
|
|
and the interval identified
|
|
by N is the interval immediately preceding the
|
|
one identified
|
|
by N-1."
|
|
::= { sonetVTIntervalEntry 1 }
|
|
|
|
sonetVTIntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Errored Seconds encountered
|
|
by a SONET/SDH VT in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetVTIntervalEntry 2 }
|
|
|
|
sonetVTIntervalSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Severely Errored Seconds
|
|
encountered by a SONET/SDH VT
|
|
in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetVTIntervalEntry 3 }
|
|
|
|
sonetVTIntervalCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Coding
|
|
Violations encountered by a
|
|
SONET/SDH VT in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetVTIntervalEntry 4 }
|
|
|
|
sonetVTIntervalUASs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Unavailable Seconds
|
|
encountered by a VT in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetVTIntervalEntry 5 }
|
|
|
|
sonetVTIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { sonetVTIntervalEntry 6 }
|
|
|
|
-- The SONET/SDH Far End VT group
|
|
|
|
-- This group consists of two tables:
|
|
-- SONET/SDH Far End VT Current Table
|
|
-- SONET/SDH Far End VT Interval Table
|
|
|
|
-- The SONET/SDH Far End VT Current
|
|
|
|
-- The SONET/SDH Far End VT Current table
|
|
-- contains various statistics
|
|
-- being collected for the current 15 minute interval.
|
|
-- The statistics are collected from
|
|
-- the far end block error code
|
|
-- (FEBE) within the G1 byte of the VT Overhead.
|
|
|
|
|
|
|
|
-- The definitions are the same as described for
|
|
-- the near-end information.
|
|
|
|
sonetFarEndVTCurrentTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetFarEndVTCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Far End VT Current table."
|
|
::= { sonetFarEndVT 1 }
|
|
|
|
sonetFarEndVTCurrentEntry OBJECT-TYPE
|
|
SYNTAX SonetFarEndVTCurrentEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Far End VT Current table."
|
|
INDEX { ifIndex }
|
|
::= { sonetFarEndVTCurrentTable 1 }
|
|
|
|
SonetFarEndVTCurrentEntry ::=
|
|
SEQUENCE {
|
|
sonetFarEndVTCurrentESs PerfCurrentCount,
|
|
sonetFarEndVTCurrentSESs PerfCurrentCount,
|
|
sonetFarEndVTCurrentCVs PerfCurrentCount,
|
|
sonetFarEndVTCurrentUASs PerfCurrentCount
|
|
}
|
|
|
|
sonetFarEndVTCurrentESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of Far
|
|
End Errored Seconds encountered by a SONET/SDH
|
|
interface in the current 15 minute interval."
|
|
::= { sonetFarEndVTCurrentEntry 1 }
|
|
|
|
sonetFarEndVTCurrentSESs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Severely Errored Seconds
|
|
encountered by a SONET/SDH VT interface
|
|
in the current 15 minute
|
|
interval."
|
|
::= { sonetFarEndVTCurrentEntry 2 }
|
|
|
|
sonetFarEndVTCurrentCVs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Coding Violations reported via
|
|
the far end block error count
|
|
encountered by a
|
|
SONET/SDH VT interface
|
|
in the current 15 minute interval."
|
|
::= { sonetFarEndVTCurrentEntry 3 }
|
|
|
|
sonetFarEndVTCurrentUASs OBJECT-TYPE
|
|
SYNTAX PerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Unavailable Seconds
|
|
encountered by a
|
|
SONET/SDH VT interface
|
|
in the current 15 minute interval."
|
|
::= { sonetFarEndVTCurrentEntry 4 }
|
|
|
|
-- The SONET/SDH Far End VT Interval Table
|
|
|
|
-- The SONET/SDH Far End VT Interval Table
|
|
-- contains various statistics
|
|
-- collected by each system over a maximum
|
|
-- of the previous 24 hours of
|
|
-- operation. The past 24 hours may be broken into 96
|
|
-- completed 15 minute intervals.
|
|
-- A system is required to store at
|
|
-- least 4 completed 15 minute interval.
|
|
-- The default value is 32 intervals.
|
|
|
|
sonetFarEndVTIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SonetFarEndVTIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SONET/SDH Far End VT Interval table."
|
|
::= { sonetFarEndVT 2 }
|
|
|
|
sonetFarEndVTIntervalEntry OBJECT-TYPE
|
|
SYNTAX SonetFarEndVTIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the SONET/SDH Far
|
|
End VT Interval table."
|
|
INDEX { ifIndex,
|
|
sonetFarEndVTIntervalNumber }
|
|
::= { sonetFarEndVTIntervalTable 1 }
|
|
|
|
SonetFarEndVTIntervalEntry ::=
|
|
SEQUENCE {
|
|
sonetFarEndVTIntervalNumber Integer32,
|
|
sonetFarEndVTIntervalESs PerfIntervalCount,
|
|
sonetFarEndVTIntervalSESs PerfIntervalCount,
|
|
sonetFarEndVTIntervalCVs PerfIntervalCount,
|
|
sonetFarEndVTIntervalUASs PerfIntervalCount,
|
|
sonetFarEndVTIntervalValidData TruthValue
|
|
}
|
|
|
|
sonetFarEndVTIntervalNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number between 1 and 96, which identifies the
|
|
interval for which the set of statistics is available.
|
|
The interval identified by 1 is the most recently
|
|
completed 15 minute interval,
|
|
and the interval identified
|
|
by N is the interval immediately preceding the
|
|
one identified
|
|
by N-1."
|
|
::= { sonetFarEndVTIntervalEntry 1 }
|
|
|
|
sonetFarEndVTIntervalESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Errored Seconds encountered
|
|
by a SONET/SDH VT interface
|
|
in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndVTIntervalEntry 2 }
|
|
|
|
sonetFarEndVTIntervalSESs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Severely Errored Seconds
|
|
encountered by a SONET/SDH VT interface
|
|
in a particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndVTIntervalEntry 3 }
|
|
|
|
sonetFarEndVTIntervalCVs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Coding Violations reported via
|
|
the far end block error count
|
|
encountered by a
|
|
SONET/SDH VT interface in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndVTIntervalEntry 4 }
|
|
|
|
sonetFarEndVTIntervalUASs OBJECT-TYPE
|
|
SYNTAX PerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter associated with the number of
|
|
Far End Unavailable Seconds
|
|
encountered by a
|
|
SONET/SDH VT interface in a
|
|
particular 15-minute interval
|
|
in the past 24 hours."
|
|
::= { sonetFarEndVTIntervalEntry 5 }
|
|
|
|
sonetFarEndVTIntervalValidData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates if the data for this
|
|
interval is valid."
|
|
::= { sonetFarEndVTIntervalEntry 6 }
|
|
|
|
-- conformance information
|
|
|
|
sonetConformance OBJECT IDENTIFIER ::= { sonetMIB 4 }
|
|
|
|
sonetGroups OBJECT IDENTIFIER ::= { sonetConformance 1 }
|
|
sonetCompliances OBJECT IDENTIFIER ::= { sonetConformance 2 }
|
|
|
|
-- deprecated compliance statement
|
|
|
|
sonetCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for SONET/SDH interfaces."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { sonetMediumStuff, sonetSectionStuff }
|
|
|
|
GROUP sonetLineStuff
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for all
|
|
SONET/SDH systems that terminate SONET/SDH Lines,
|
|
Paths or Virtual Tributaries."
|
|
|
|
GROUP sonetFarEndLineStuff
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all
|
|
SONET/SDH systems that terminate SONET/SDH Lines,
|
|
Paths or Virtual Tributaries, and that
|
|
provide for a far end block error (FEBE)
|
|
information at the SONET/SDH Line Layer."
|
|
|
|
GROUP sonetPathStuff
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for all
|
|
SONET/SDH systems that terminate SONET/SDH
|
|
Paths or Virtual Tributaries."
|
|
|
|
OBJECT sonetPathCurrentWidth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
GROUP sonetFarEndPathStuff
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all
|
|
SONET/SDH systems that terminate SONET/SDH
|
|
Paths or Virtual Tributaries, and that process
|
|
Far End information."
|
|
GROUP sonetVTStuff
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for all
|
|
SONET/SDH systems that terminate SONET/SDH Virtual
|
|
Tributaries."
|
|
|
|
OBJECT sonetVTCurrentWidth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
GROUP sonetFarEndVTStuff
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all
|
|
SONET/SDH systems that terminate the SONET/SDH
|
|
floating Virtual Tributaries, and that process
|
|
Far End information."
|
|
|
|
::= { sonetCompliances 1 }
|
|
|
|
-- current compliance statements
|
|
|
|
sonetCompliance2 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SONET/SDH interfaces."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { sonetMediumStuff2, sonetSectionStuff2 }
|
|
|
|
OBJECT sonetMediumType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT sonetMediumLineCoding
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT sonetMediumLineType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT sonetMediumCircuitIdentifier
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT sonetMediumLoopbackConfig
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT sonetSESthresholdSet
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required, and only one
|
|
of the enumerated values need be supported."
|
|
|
|
GROUP sonetLineStuff2
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for all
|
|
SONET/SDH systems that terminate SONET/SDH Lines,
|
|
Paths or Virtual Tributaries."
|
|
|
|
GROUP sonetFarEndLineStuff2
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all
|
|
SONET/SDH systems that terminate SONET/SDH Lines,
|
|
Paths or Virtual Tributaries, and that
|
|
provide for a far end block error (FEBE)
|
|
information at the SONET/SDH Line Layer."
|
|
|
|
GROUP sonetPathStuff2
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for all
|
|
SONET/SDH systems that terminate SONET/SDH
|
|
Paths or Virtual Tributaries."
|
|
|
|
OBJECT sonetPathCurrentWidth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
GROUP sonetFarEndPathStuff2
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all
|
|
SONET/SDH systems that terminate SONET/SDH
|
|
Paths or Virtual Tributaries, and that process
|
|
Far End information."
|
|
|
|
GROUP sonetVTStuff2
|
|
DESCRIPTION
|
|
"Implementation of this group is mandatory for all
|
|
SONET/SDH systems that terminate SONET/SDH Virtual
|
|
Tributaries."
|
|
|
|
OBJECT sonetVTCurrentWidth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
GROUP sonetFarEndVTStuff2
|
|
DESCRIPTION
|
|
"Implementation of this group is optional for all
|
|
SONET/SDH systems that terminate the SONET/SDH
|
|
floating Virtual Tributaries, and that process
|
|
Far End information."
|
|
|
|
::= { sonetCompliances 2 }
|
|
|
|
-- units of conformance
|
|
|
|
-- deprecated groups
|
|
|
|
sonetMediumStuff OBJECT-GROUP
|
|
OBJECTS { sonetMediumType,
|
|
sonetMediumTimeElapsed,
|
|
sonetMediumValidIntervals,
|
|
sonetMediumLineCoding,
|
|
sonetMediumLineType,
|
|
sonetMediumCircuitIdentifier }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing configuration
|
|
information applicable to all SONET/SDH interfaces."
|
|
::= { sonetGroups 1 }
|
|
|
|
sonetSectionStuff OBJECT-GROUP
|
|
OBJECTS { sonetSectionCurrentStatus,
|
|
sonetSectionCurrentESs,
|
|
sonetSectionCurrentSESs,
|
|
sonetSectionCurrentSEFSs,
|
|
sonetSectionCurrentCVs,
|
|
sonetSectionIntervalESs,
|
|
sonetSectionIntervalSESs,
|
|
sonetSectionIntervalSEFSs,
|
|
sonetSectionIntervalCVs
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Section interfaces."
|
|
::= { sonetGroups 2 }
|
|
|
|
sonetLineStuff OBJECT-GROUP
|
|
OBJECTS { sonetLineCurrentStatus,
|
|
sonetLineCurrentESs,
|
|
sonetLineCurrentSESs,
|
|
sonetLineCurrentCVs,
|
|
sonetLineCurrentUASs,
|
|
sonetLineIntervalESs,
|
|
sonetLineIntervalSESs,
|
|
sonetLineIntervalCVs,
|
|
sonetLineIntervalUASs }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Line interfaces."
|
|
::= { sonetGroups 3 }
|
|
|
|
sonetFarEndLineStuff OBJECT-GROUP
|
|
OBJECTS { sonetFarEndLineCurrentESs,
|
|
sonetFarEndLineCurrentSESs,
|
|
sonetFarEndLineCurrentCVs,
|
|
sonetFarEndLineCurrentUASs,
|
|
sonetFarEndLineIntervalESs,
|
|
sonetFarEndLineIntervalSESs,
|
|
sonetFarEndLineIntervalCVs,
|
|
sonetFarEndLineIntervalUASs }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Line interfaces,
|
|
and maintaining Line Far End information."
|
|
::= { sonetGroups 4 }
|
|
|
|
sonetPathStuff OBJECT-GROUP
|
|
OBJECTS { sonetPathCurrentWidth,
|
|
sonetPathCurrentStatus,
|
|
sonetPathCurrentESs,
|
|
sonetPathCurrentSESs,
|
|
sonetPathCurrentCVs,
|
|
sonetPathCurrentUASs,
|
|
sonetPathIntervalESs,
|
|
sonetPathIntervalSESs,
|
|
sonetPathIntervalCVs,
|
|
sonetPathIntervalUASs }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Path interfaces."
|
|
::= { sonetGroups 5 }
|
|
|
|
sonetFarEndPathStuff OBJECT-GROUP
|
|
OBJECTS { sonetFarEndPathCurrentESs,
|
|
sonetFarEndPathCurrentSESs,
|
|
sonetFarEndPathCurrentCVs,
|
|
sonetFarEndPathCurrentUASs,
|
|
sonetFarEndPathIntervalESs,
|
|
sonetFarEndPathIntervalSESs,
|
|
sonetFarEndPathIntervalCVs,
|
|
sonetFarEndPathIntervalUASs }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Path interfaces,
|
|
and maintaining Path Far End information."
|
|
::= { sonetGroups 6 }
|
|
|
|
sonetVTStuff OBJECT-GROUP
|
|
OBJECTS { sonetVTCurrentWidth,
|
|
sonetVTCurrentStatus,
|
|
sonetVTCurrentESs,
|
|
sonetVTCurrentSESs,
|
|
sonetVTCurrentCVs,
|
|
sonetVTCurrentUASs,
|
|
sonetVTIntervalESs,
|
|
sonetVTIntervalSESs,
|
|
sonetVTIntervalCVs,
|
|
sonetVTIntervalUASs }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH VT interfaces."
|
|
::= { sonetGroups 7 }
|
|
|
|
sonetFarEndVTStuff OBJECT-GROUP
|
|
OBJECTS { sonetFarEndVTCurrentESs,
|
|
sonetFarEndVTCurrentSESs,
|
|
sonetFarEndVTCurrentCVs,
|
|
sonetFarEndVTCurrentUASs,
|
|
sonetFarEndVTIntervalESs,
|
|
sonetFarEndVTIntervalSESs,
|
|
sonetFarEndVTIntervalCVs,
|
|
sonetFarEndVTIntervalUASs }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH VT interfaces,
|
|
and maintaining VT Far End information."
|
|
::= { sonetGroups 8 }
|
|
|
|
-- current groups
|
|
|
|
sonetMediumStuff2 OBJECT-GROUP
|
|
OBJECTS { sonetMediumType,
|
|
sonetMediumTimeElapsed,
|
|
sonetMediumValidIntervals,
|
|
sonetMediumLineCoding,
|
|
sonetMediumLineType,
|
|
sonetMediumCircuitIdentifier,
|
|
sonetMediumInvalidIntervals,
|
|
sonetMediumLoopbackConfig,
|
|
sonetSESthresholdSet }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing configuration
|
|
information applicable to all SONET/SDH interfaces."
|
|
::= { sonetGroups 9 }
|
|
|
|
sonetSectionStuff2 OBJECT-GROUP
|
|
OBJECTS { sonetSectionCurrentStatus,
|
|
sonetSectionCurrentESs,
|
|
sonetSectionCurrentSESs,
|
|
sonetSectionCurrentSEFSs,
|
|
sonetSectionCurrentCVs,
|
|
sonetSectionIntervalESs,
|
|
sonetSectionIntervalSESs,
|
|
sonetSectionIntervalSEFSs,
|
|
sonetSectionIntervalCVs,
|
|
sonetSectionIntervalValidData }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Section interfaces."
|
|
::= { sonetGroups 10 }
|
|
|
|
sonetLineStuff2 OBJECT-GROUP
|
|
OBJECTS { sonetLineCurrentStatus,
|
|
sonetLineCurrentESs,
|
|
sonetLineCurrentSESs,
|
|
sonetLineCurrentCVs,
|
|
sonetLineCurrentUASs,
|
|
sonetLineIntervalESs,
|
|
sonetLineIntervalSESs,
|
|
sonetLineIntervalCVs,
|
|
sonetLineIntervalUASs,
|
|
sonetLineIntervalValidData }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Line interfaces."
|
|
::= { sonetGroups 11 }
|
|
|
|
sonetPathStuff2 OBJECT-GROUP
|
|
OBJECTS { sonetPathCurrentWidth,
|
|
sonetPathCurrentStatus,
|
|
sonetPathCurrentESs,
|
|
sonetPathCurrentSESs,
|
|
sonetPathCurrentCVs,
|
|
sonetPathCurrentUASs,
|
|
sonetPathIntervalESs,
|
|
sonetPathIntervalSESs,
|
|
sonetPathIntervalCVs,
|
|
sonetPathIntervalUASs,
|
|
sonetPathIntervalValidData }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Path interfaces."
|
|
::= { sonetGroups 12 }
|
|
|
|
sonetVTStuff2 OBJECT-GROUP
|
|
OBJECTS { sonetVTCurrentWidth,
|
|
sonetVTCurrentStatus,
|
|
sonetVTCurrentESs,
|
|
sonetVTCurrentSESs,
|
|
sonetVTCurrentCVs,
|
|
sonetVTCurrentUASs,
|
|
sonetVTIntervalESs,
|
|
sonetVTIntervalSESs,
|
|
sonetVTIntervalCVs,
|
|
sonetVTIntervalUASs,
|
|
sonetVTIntervalValidData }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH VT interfaces."
|
|
::= { sonetGroups 13 }
|
|
|
|
sonetFarEndLineStuff2 OBJECT-GROUP
|
|
OBJECTS { sonetFarEndLineCurrentESs,
|
|
sonetFarEndLineCurrentSESs,
|
|
sonetFarEndLineCurrentCVs,
|
|
sonetFarEndLineCurrentUASs,
|
|
sonetFarEndLineIntervalESs,
|
|
sonetFarEndLineIntervalSESs,
|
|
sonetFarEndLineIntervalCVs,
|
|
sonetFarEndLineIntervalUASs,
|
|
sonetFarEndLineIntervalValidData }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Line interfaces,
|
|
and maintaining Line Far End information."
|
|
::= { sonetGroups 14 }
|
|
|
|
sonetFarEndPathStuff2 OBJECT-GROUP
|
|
OBJECTS { sonetFarEndPathCurrentESs,
|
|
sonetFarEndPathCurrentSESs,
|
|
sonetFarEndPathCurrentCVs,
|
|
sonetFarEndPathCurrentUASs,
|
|
sonetFarEndPathIntervalESs,
|
|
sonetFarEndPathIntervalSESs,
|
|
sonetFarEndPathIntervalCVs,
|
|
sonetFarEndPathIntervalUASs,
|
|
sonetFarEndPathIntervalValidData }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH Path interfaces,
|
|
and maintaining Path Far End information."
|
|
::= { sonetGroups 15 }
|
|
|
|
sonetFarEndVTStuff2 OBJECT-GROUP
|
|
OBJECTS { sonetFarEndVTCurrentESs,
|
|
sonetFarEndVTCurrentSESs,
|
|
sonetFarEndVTCurrentCVs,
|
|
sonetFarEndVTCurrentUASs,
|
|
sonetFarEndVTIntervalESs,
|
|
sonetFarEndVTIntervalSESs,
|
|
sonetFarEndVTIntervalCVs,
|
|
sonetFarEndVTIntervalUASs,
|
|
sonetFarEndVTIntervalValidData }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information
|
|
specific to SONET/SDH VT interfaces,
|
|
and maintaining VT Far End information."
|
|
::= { sonetGroups 16 }
|
|
|
|
END
|