2841 lines
107 KiB
Plaintext
2841 lines
107 KiB
Plaintext
|
|
VDSL-LINE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Gauge32,
|
|
Integer32,
|
|
Unsigned32,
|
|
NOTIFICATION-TYPE,
|
|
transmission FROM SNMPv2-SMI -- [RFC2578]
|
|
ZeroBasedCounter64 FROM HCNUM-TC -- [RFC2856]
|
|
TEXTUAL-CONVENTION,
|
|
RowStatus,
|
|
TruthValue FROM SNMPv2-TC -- [RFC2579]
|
|
HCPerfValidIntervals,
|
|
HCPerfInvalidIntervals,
|
|
HCPerfTimeElapsed,
|
|
HCPerfIntervalThreshold,
|
|
HCPerfCurrentCount,
|
|
HCPerfIntervalCount FROM HC-PerfHist-TC-MIB -- [RFC3705]
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP,
|
|
NOTIFICATION-GROUP FROM SNMPv2-CONF -- [RFC2580]
|
|
ifIndex FROM IF-MIB -- [RFC2863]
|
|
SnmpAdminString FROM SNMP-FRAMEWORK-MIB; -- [RFC3411]
|
|
|
|
vdslMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200402190000Z" -- February 19, 2004
|
|
ORGANIZATION "ADSLMIB Working Group"
|
|
CONTACT-INFO "WG-email: adslmib@ietf.org
|
|
Info: https://www1.ietf.org/mailman/listinfo/adslmib
|
|
|
|
Chair: Mike Sneed
|
|
Sand Channel Systems
|
|
Postal: P.O. Box 37324
|
|
Raleigh, NC 27627-7324
|
|
USA
|
|
Email: sneedmike@hotmail.com
|
|
Phone: +1 206 600 7022
|
|
|
|
Co-editor: Bob Ray
|
|
PESA Switching Systems, Inc.
|
|
Postal: 330-A Wynn Drive
|
|
Huntsville, AL 35805
|
|
USA
|
|
Email: rray@pesa.com
|
|
Phone: +1 256 726 9200 ext. 142
|
|
|
|
Co-editor: Rajesh Abbi
|
|
Alcatel USA
|
|
Postal: 2301 Sugar Bush Road
|
|
Raleigh, NC 27612-3339
|
|
USA
|
|
Email: Rajesh.Abbi@alcatel.com
|
|
Phone: +1 919 850 6194
|
|
"
|
|
DESCRIPTION
|
|
"The MIB module defining objects for the management of a pair
|
|
of VDSL transceivers at each end of the VDSL line. Each such
|
|
line has an entry in an ifTable which may include multiple
|
|
transceiver lines. An agent may reside at either end of the
|
|
VDSL line. However, the MIB is designed to require no
|
|
management communication between them beyond that inherent in
|
|
the low-level VDSL line protocol. The agent may monitor and
|
|
control this protocol for its needs.
|
|
VDSL lines may support optional Fast or Interleaved channels.
|
|
If these are supported, additional entries corresponding to the
|
|
supported channels must be created in the ifTable. Thus a VDSL
|
|
line that supports both channels will have three entries in the
|
|
ifTable, one for each physical, fast, and interleaved, whose
|
|
ifType values are equal to vdsl(97), fast(125), and
|
|
interleaved(124), respectively. The ifStackTable is used to
|
|
represent the relationship between the entries.
|
|
|
|
Naming Conventions:
|
|
Vtuc -- (VTUC) transceiver at near (Central) end of line
|
|
Vtur -- (VTUR) transceiver at Remote end of line
|
|
Vtu -- One of either Vtuc or Vtur
|
|
Curr -- Current
|
|
Prev -- Previous
|
|
Atn -- Attenuation
|
|
ES -- Errored Second.
|
|
SES -- Severely Errored Second
|
|
UAS -- Unavailable Second
|
|
LCS -- Line Code Specific
|
|
Lof -- Loss of Frame
|
|
Lol -- Loss of Link
|
|
Los -- Loss of Signal
|
|
Lpr -- Loss of Power
|
|
xxxs -- Sum of Seconds in which xxx has occured
|
|
(e.g., xxx = Lof, Los, Lpr, Lol)
|
|
Max -- Maximum
|
|
Mgn -- Margin
|
|
Min -- Minimum
|
|
Psd -- Power Spectral Density
|
|
Snr -- Signal to Noise Ratio
|
|
Tx -- Transmit
|
|
Blks -- Blocks
|
|
|
|
Copyright (C) The Internet Society (2004). This version
|
|
of this MIB module is part of RFC 3728: see the RFC
|
|
itself for full legal notices."
|
|
REVISION "200402190000Z" -- February 19, 2004
|
|
DESCRIPTION "Initial version, published as RFC 3728."
|
|
::= { transmission 97 }
|
|
|
|
vdslLineMib OBJECT IDENTIFIER ::= { vdslMIB 1 }
|
|
vdslMibObjects OBJECT IDENTIFIER ::= { vdslLineMib 1 }
|
|
|
|
--
|
|
-- textual conventions used in this MIB
|
|
--
|
|
|
|
VdslLineCodingType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This data type is used as the syntax for the VDSL Line
|
|
Code. Attributes with this syntax identify the line coding
|
|
used. Specified as an INTEGER, the three values are:
|
|
|
|
other(1) -- none of the following
|
|
mcm(2) -- Multiple Carrier Modulation
|
|
scm(3) -- Single Carrier Modulation"
|
|
SYNTAX INTEGER
|
|
{
|
|
other(1),
|
|
mcm(2),
|
|
scm(3)
|
|
}
|
|
|
|
VdslLineEntity ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies a transceiver as being either Vtuc or Vtur.
|
|
A VDSL line consists of two transceivers, a Vtuc and a
|
|
Vtur. Attributes with this syntax reference the two sides
|
|
of a line. Specified as an INTEGER, the two values are:
|
|
|
|
vtuc(1) -- central site transceiver
|
|
vtur(2) -- remote site transceiver"
|
|
SYNTAX INTEGER
|
|
{
|
|
vtuc(1),
|
|
vtur(2)
|
|
}
|
|
|
|
--
|
|
-- objects
|
|
--
|
|
|
|
vdslLineTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslLineEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes common attributes describing
|
|
both ends of the line. It is required for all VDSL
|
|
physical interfaces. VDSL physical interfaces are
|
|
those ifEntries where ifType is equal to vdsl(97)."
|
|
::= { vdslMibObjects 1 }
|
|
|
|
|
|
vdslLineEntry OBJECT-TYPE
|
|
SYNTAX VdslLineEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the vdslLineTable."
|
|
INDEX { ifIndex }
|
|
::= { vdslLineTable 1 }
|
|
|
|
VdslLineEntry ::=
|
|
SEQUENCE
|
|
{
|
|
vdslLineCoding VdslLineCodingType,
|
|
vdslLineType INTEGER,
|
|
vdslLineConfProfile SnmpAdminString,
|
|
vdslLineAlarmConfProfile SnmpAdminString
|
|
}
|
|
|
|
vdslLineCoding OBJECT-TYPE
|
|
SYNTAX VdslLineCodingType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the VDSL coding type used on this line."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslLineEntry 1 }
|
|
|
|
vdslLineType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noChannel(1), -- no channels exist
|
|
fastOnly(2), -- only fast channel exists
|
|
interleavedOnly(3), -- only interleaved channel exists
|
|
fastOrInterleaved(4), -- either fast or interleaved channel
|
|
-- exist, but only one at a time
|
|
fastAndInterleaved(5) -- both fast and interleaved channels
|
|
-- exist
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the type of VDSL physical line entity that exists,
|
|
by defining whether and how the line is channelized. If
|
|
the line is channelized, the value will be other than
|
|
noChannel(1). This object defines which channel type(s)
|
|
are supported. Defined values are:
|
|
|
|
noChannel(1) -- no channels exist
|
|
fastOnly(2) -- only fast channel exists
|
|
interleavedOnly(3) -- only interleaved channel exists
|
|
fastOrInterleaved(4) -- either fast or interleaved channel
|
|
-- exist, but only one at a time
|
|
fastAndInterleaved(5) -- both fast and interleaved channels
|
|
-- exist
|
|
|
|
Note that 'slow' and 'interleaved' refer to the same
|
|
channel. In the case that the line is channelized, the
|
|
manager can use the ifStackTable to determine the ifIndex
|
|
for the associated channel(s)."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslLineEntry 2 }
|
|
|
|
vdslLineConfProfile OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object identifies the row in the VDSL
|
|
Line Configuration Profile Table, vdslLineConfProfileTable,
|
|
which applies for this VDSL line, and channels if
|
|
applicable.
|
|
|
|
This object MUST be maintained in a persistent manner."
|
|
DEFVAL { "DEFVAL" }
|
|
::= { vdslLineEntry 3 }
|
|
|
|
vdslLineAlarmConfProfile OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object identifies the row in the VDSL
|
|
Line Alarm Configuration Profile Table,
|
|
vdslLineAlarmConfProfileTable, which applies to this
|
|
VDSL line, and channels if applicable.
|
|
|
|
This object MUST be maintained in a persistent manner."
|
|
DEFVAL { "DEFVAL" }
|
|
::= { vdslLineEntry 4 }
|
|
|
|
vdslPhysTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslPhysEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each Vtu. Each row
|
|
contains the Physical Layer Parameters table for that
|
|
Vtu. VDSL physical interfaces are those ifEntries where
|
|
ifType is equal to vdsl(97)."
|
|
::= { vdslMibObjects 2 }
|
|
|
|
vdslPhysEntry OBJECT-TYPE
|
|
SYNTAX VdslPhysEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the vdslPhysTable."
|
|
INDEX { ifIndex,
|
|
vdslPhysSide }
|
|
::= { vdslPhysTable 1 }
|
|
|
|
VdslPhysEntry ::=
|
|
SEQUENCE
|
|
{
|
|
vdslPhysSide VdslLineEntity,
|
|
vdslPhysInvSerialNumber SnmpAdminString,
|
|
vdslPhysInvVendorID SnmpAdminString,
|
|
vdslPhysInvVersionNumber SnmpAdminString,
|
|
vdslPhysCurrSnrMgn Integer32,
|
|
vdslPhysCurrAtn Gauge32,
|
|
vdslPhysCurrStatus BITS,
|
|
vdslPhysCurrOutputPwr Integer32,
|
|
vdslPhysCurrAttainableRate Gauge32,
|
|
vdslPhysCurrLineRate Gauge32
|
|
}
|
|
|
|
vdslPhysSide OBJECT-TYPE
|
|
SYNTAX VdslLineEntity
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies whether the transceiver is the Vtuc or Vtur."
|
|
::= { vdslPhysEntry 1 }
|
|
|
|
vdslPhysInvSerialNumber OBJECT-TYPE
|
|
SYNTAX SnmpAdminString(SIZE (0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor specific string that identifies the
|
|
vendor equipment."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPhysEntry 2 }
|
|
|
|
vdslPhysInvVendorID OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor ID code is a copy of the binary vendor
|
|
identification field expressed as readable characters
|
|
in hexadecimal notation."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPhysEntry 3 }
|
|
|
|
vdslPhysInvVersionNumber OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor specific version number sent by this Vtu
|
|
as part of the initialization messages. It is a copy
|
|
of the binary version number field expressed as
|
|
readable characters in hexadecimal notation."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPhysEntry 4 }
|
|
|
|
vdslPhysCurrSnrMgn OBJECT-TYPE
|
|
SYNTAX Integer32 (-127..127)
|
|
UNITS "0.25dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Noise Margin as seen by this Vtu with respect to its
|
|
received signal in 0.25dB. The effective range is
|
|
-31.75 to +31.75 dB."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPhysEntry 5 }
|
|
|
|
vdslPhysCurrAtn OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..255)
|
|
UNITS "0.25dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured difference in the total power transmitted by
|
|
the peer Vtu and the total power received by this Vtu.
|
|
The effective range is 0 to +63.75 dB."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPhysEntry 6 }
|
|
|
|
vdslPhysCurrStatus OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
noDefect(0),
|
|
lossOfFraming(1),
|
|
lossOfSignal(2),
|
|
lossOfPower(3),
|
|
lossOfSignalQuality(4),
|
|
lossOfLink(5),
|
|
dataInitFailure(6),
|
|
configInitFailure(7),
|
|
protocolInitFailure(8),
|
|
noPeerVtuPresent(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates current state of the Vtu line. This is a
|
|
bit-map of possible conditions. The various bit
|
|
positions are:
|
|
|
|
0 noDefect There are no defects on the line.
|
|
|
|
1 lossOfFraming Vtu failure due to not receiving
|
|
a valid frame.
|
|
|
|
2 lossOfSignal Vtu failure due to not receiving
|
|
signal.
|
|
|
|
3 lossOfPower Vtu failure due to loss of power.
|
|
|
|
4 lossOfSignalQuality Loss of Signal Quality is declared
|
|
when the Noise Margin falls below
|
|
the Minimum Noise Margin, or the
|
|
bit-error-rate exceeds 10^-7.
|
|
|
|
5 lossOfLink Vtu failure due to inability to
|
|
link with peer Vtu. Set whenever
|
|
the transceiver is in the 'Warm
|
|
Start' state.
|
|
|
|
6 dataInitFailure Vtu failure during initialization
|
|
due to bit errors corrupting
|
|
startup exchange data.
|
|
|
|
7 configInitFailure Vtu failure during initialization
|
|
due to peer Vtu not able to
|
|
support requested configuration.
|
|
|
|
8 protocolInitFailure Vtu failure during initialization
|
|
due to incompatible protocol used
|
|
by the peer Vtu.
|
|
|
|
9 noPeerVtuPresent Vtu failure during initialization
|
|
due to no activation sequence
|
|
detected from peer Vtu.
|
|
|
|
This is intended to supplement ifOperStatus."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPhysEntry 7 }
|
|
|
|
vdslPhysCurrOutputPwr OBJECT-TYPE
|
|
SYNTAX Integer32 (0..160)
|
|
UNITS "0.1dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured total output power transmitted by this VTU.
|
|
This is the measurement that was reported during
|
|
the last activation sequence."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPhysEntry 8 }
|
|
|
|
vdslPhysCurrAttainableRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maximum currently attainable data rate
|
|
in steps of 1000 bits/second by the Vtu. This value
|
|
will be equal to or greater than vdslPhysCurrLineRate.
|
|
Note that for SCM, the minimum and maximum data rates
|
|
are equal. Note: 1 kbps = 1000 bps."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPhysEntry 9 }
|
|
|
|
vdslPhysCurrLineRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the current data rate in steps of 1000
|
|
bits/second by the Vtu. This value will be less than
|
|
or equal to vdslPhysCurrAttainableRate. Note: 1 kbps =
|
|
1000 bps."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPhysEntry 10 }
|
|
|
|
vdslChanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslChanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each Vtu channel.
|
|
VDSL channel interfaces are those ifEntries where
|
|
ifType is equal to interleave(124) or fast(125)."
|
|
::= { vdslMibObjects 3 }
|
|
|
|
vdslChanEntry OBJECT-TYPE
|
|
SYNTAX VdslChanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the vdslChanTable."
|
|
INDEX { ifIndex,
|
|
vdslPhysSide }
|
|
::= { vdslChanTable 1 }
|
|
|
|
VdslChanEntry ::=
|
|
SEQUENCE
|
|
{
|
|
vdslChanInterleaveDelay Gauge32,
|
|
vdslChanCrcBlockLength Gauge32,
|
|
vdslChanCurrTxRate Gauge32,
|
|
vdslChanCurrTxSlowBurstProtect Gauge32,
|
|
vdslChanCurrTxFastFec Gauge32
|
|
}
|
|
|
|
vdslChanInterleaveDelay OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interleave Delay for this channel.
|
|
|
|
Interleave delay applies only to the interleave
|
|
(slow) channel and defines the mapping (relative
|
|
spacing) between subsequent input bytes at the
|
|
interleaver input and their placement in the bit
|
|
stream at the interleaver output. Larger numbers
|
|
provide greater separation between consecutive
|
|
input bytes in the output bit stream allowing for
|
|
improved impulse noise immunity at the expense of
|
|
payload latency.
|
|
|
|
In the case where the ifType is fast(125), return
|
|
a value of zero."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslChanEntry 1 }
|
|
|
|
vdslChanCrcBlockLength OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the length of the channel data-block
|
|
on which the CRC operates."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslChanEntry 2 }
|
|
|
|
vdslChanCurrTxRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual transmit data rate on this channel. Note: 1
|
|
kbps = 1000 bps."
|
|
::= { vdslChanEntry 3 }
|
|
|
|
vdslChanCurrTxSlowBurstProtect OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..1275)
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual level of impulse noise (burst) protection
|
|
for an interleaved (slow) channel. This parameter is
|
|
not applicable to fast channels. For fast channels,
|
|
a value of zero shall be returned."
|
|
REFERENCE "ITU-T G.997.1, section 7.3.2.3"
|
|
::= { vdslChanEntry 4 }
|
|
|
|
vdslChanCurrTxFastFec OBJECT-TYPE
|
|
SYNTAX Gauge32 (0..50)
|
|
UNITS "%"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actual Forward Error Correction (FEC) redundancy
|
|
related overhead for a fast channel. This parameter
|
|
is not applicable to an interleaved (slow) channel.
|
|
For interleaved channels, a value of zero shall be
|
|
returned."
|
|
::= { vdslChanEntry 5 }
|
|
|
|
vdslPerfDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each VDSL physical
|
|
interface. VDSL physical interfaces are those ifEntries
|
|
where ifType is equal to vdsl(97)."
|
|
::= { vdslMibObjects 4 }
|
|
|
|
vdslPerfDataEntry OBJECT-TYPE
|
|
SYNTAX VdslPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the vdslPerfDataTable."
|
|
INDEX { ifIndex,
|
|
vdslPhysSide }
|
|
::= { vdslPerfDataTable 1 }
|
|
|
|
VdslPerfDataEntry ::=
|
|
SEQUENCE
|
|
{
|
|
vdslPerfDataValidIntervals HCPerfValidIntervals,
|
|
vdslPerfDataInvalidIntervals HCPerfInvalidIntervals,
|
|
vdslPerfDataLofs Unsigned32,
|
|
vdslPerfDataLoss Unsigned32,
|
|
vdslPerfDataLprs Unsigned32,
|
|
vdslPerfDataLols Unsigned32,
|
|
vdslPerfDataESs Unsigned32,
|
|
vdslPerfDataSESs Unsigned32,
|
|
vdslPerfDataUASs Unsigned32,
|
|
vdslPerfDataInits Unsigned32,
|
|
vdslPerfDataCurr15MinTimeElapsed HCPerfTimeElapsed,
|
|
vdslPerfDataCurr15MinLofs HCPerfCurrentCount,
|
|
vdslPerfDataCurr15MinLoss HCPerfCurrentCount,
|
|
vdslPerfDataCurr15MinLprs HCPerfCurrentCount,
|
|
vdslPerfDataCurr15MinLols HCPerfCurrentCount,
|
|
vdslPerfDataCurr15MinESs HCPerfCurrentCount,
|
|
vdslPerfDataCurr15MinSESs HCPerfCurrentCount,
|
|
vdslPerfDataCurr15MinUASs HCPerfCurrentCount,
|
|
vdslPerfDataCurr15MinInits HCPerfCurrentCount,
|
|
vdslPerfData1DayValidIntervals HCPerfValidIntervals,
|
|
vdslPerfData1DayInvalidIntervals HCPerfInvalidIntervals,
|
|
vdslPerfDataCurr1DayTimeElapsed HCPerfTimeElapsed,
|
|
vdslPerfDataCurr1DayLofs Unsigned32,
|
|
vdslPerfDataCurr1DayLoss Unsigned32,
|
|
vdslPerfDataCurr1DayLprs Unsigned32,
|
|
vdslPerfDataCurr1DayLols Unsigned32,
|
|
vdslPerfDataCurr1DayESs Unsigned32,
|
|
vdslPerfDataCurr1DaySESs Unsigned32,
|
|
vdslPerfDataCurr1DayUASs Unsigned32,
|
|
vdslPerfDataCurr1DayInits Unsigned32
|
|
}
|
|
|
|
vdslPerfDataValidIntervals OBJECT-TYPE
|
|
SYNTAX HCPerfValidIntervals
|
|
UNITS "intervals"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid Intervals per definition found in
|
|
HC-PerfHist-TC-MIB."
|
|
::= { vdslPerfDataEntry 1 }
|
|
|
|
vdslPerfDataInvalidIntervals OBJECT-TYPE
|
|
SYNTAX HCPerfInvalidIntervals
|
|
UNITS "intervals"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Invalid Intervals per definition found in
|
|
HC-PerfHist-TC-MIB."
|
|
::= { vdslPerfDataEntry 2 }
|
|
|
|
vdslPerfDataLofs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds since the unit was last reset that there
|
|
was Loss of Framing."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerfDataEntry 3 }
|
|
|
|
vdslPerfDataLoss OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds since the unit was last reset that there
|
|
was Loss of Signal."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerfDataEntry 4 }
|
|
|
|
vdslPerfDataLprs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds since the unit was last reset that there
|
|
was Loss of Power."
|
|
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerfDataEntry 5 }
|
|
|
|
vdslPerfDataLols OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds since the unit was last reset that there
|
|
was Loss of Link."
|
|
::= { vdslPerfDataEntry 6 }
|
|
|
|
vdslPerfDataESs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds since the unit was last reset.
|
|
An Errored Second is a one-second interval containing one
|
|
or more CRC anomalies, or one or more LOS or LOF defects."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerfDataEntry 7 }
|
|
|
|
vdslPerfDataSESs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Severely Errored Seconds since the unit was last
|
|
reset."
|
|
::= { vdslPerfDataEntry 8 }
|
|
|
|
vdslPerfDataUASs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Unavailable Seconds since the unit was last
|
|
reset."
|
|
::= { vdslPerfDataEntry 9 }
|
|
|
|
vdslPerfDataInits OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "occurrences"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the line initialization attempts since the unit
|
|
was last reset. This count includes both successful and
|
|
failed attempts."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerfDataEntry 10 }
|
|
|
|
vdslPerfDataCurr15MinTimeElapsed OBJECT-TYPE
|
|
SYNTAX HCPerfTimeElapsed
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total elapsed seconds in this interval."
|
|
::= { vdslPerfDataEntry 11 }
|
|
|
|
vdslPerfDataCurr15MinLofs OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds during this interval that there
|
|
was Loss of Framing."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerfDataEntry 12 }
|
|
|
|
vdslPerfDataCurr15MinLoss OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds during this interval that there
|
|
was Loss of Signal."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerfDataEntry 13 }
|
|
|
|
vdslPerfDataCurr15MinLprs OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds during this interval that there
|
|
was Loss of Power."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerfDataEntry 14 }
|
|
|
|
vdslPerfDataCurr15MinLols OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds during this interval that there
|
|
was Loss of Link."
|
|
::= { vdslPerfDataEntry 15 }
|
|
|
|
vdslPerfDataCurr15MinESs OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds during this interval. An Errored
|
|
Second is a one-second interval containing one or more CRC
|
|
anomalies, or one or more LOS or LOF defects."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerfDataEntry 16 }
|
|
|
|
vdslPerfDataCurr15MinSESs OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Severely Errored Seconds during this interval."
|
|
::= { vdslPerfDataEntry 17 }
|
|
|
|
vdslPerfDataCurr15MinUASs OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Unavailable Seconds during this interval."
|
|
::= { vdslPerfDataEntry 18 }
|
|
|
|
vdslPerfDataCurr15MinInits OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
UNITS "occurrences"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the line initialization attempts during this
|
|
interval. This count includes both successful and
|
|
failed attempts."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerfDataEntry 19 }
|
|
|
|
vdslPerfData1DayValidIntervals OBJECT-TYPE
|
|
SYNTAX HCPerfValidIntervals
|
|
UNITS "intervals"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid Intervals per definition found in
|
|
HC-PerfHist-TC-MIB."
|
|
::= { vdslPerfDataEntry 20 }
|
|
|
|
vdslPerfData1DayInvalidIntervals OBJECT-TYPE
|
|
SYNTAX HCPerfInvalidIntervals
|
|
UNITS "intervals"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Invalid Intervals per definition found in
|
|
HC-PerfHist-TC-MIB."
|
|
::= { vdslPerfDataEntry 21 }
|
|
|
|
vdslPerfDataCurr1DayTimeElapsed OBJECT-TYPE
|
|
SYNTAX HCPerfTimeElapsed
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds that have elapsed since the beginning
|
|
of the current 1-day interval."
|
|
::= { vdslPerfDataEntry 22 }
|
|
|
|
vdslPerfDataCurr1DayLofs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Loss of Framing (LOF) Seconds since the
|
|
beginning of the current 1-day interval."
|
|
::= { vdslPerfDataEntry 23 }
|
|
|
|
vdslPerfDataCurr1DayLoss OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Loss of Signal (LOS) Seconds since the beginning
|
|
of the current 1-day interval."
|
|
::= { vdslPerfDataEntry 24 }
|
|
|
|
vdslPerfDataCurr1DayLprs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Loss of Power (LPR) Seconds since the beginning
|
|
of the current 1-day interval."
|
|
::= { vdslPerfDataEntry 25 }
|
|
|
|
vdslPerfDataCurr1DayLols OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Loss of Link (LOL) Seconds since the beginning
|
|
of the current 1-day interval."
|
|
::= { vdslPerfDataEntry 26 }
|
|
|
|
vdslPerfDataCurr1DayESs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds (ES) since the beginning
|
|
of the current 1-day interval."
|
|
::= { vdslPerfDataEntry 27 }
|
|
|
|
vdslPerfDataCurr1DaySESs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Severely Errored Seconds (SES) since the
|
|
beginning of the current 1-day interval."
|
|
::= { vdslPerfDataEntry 28 }
|
|
|
|
vdslPerfDataCurr1DayUASs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Unavailable Seconds (UAS) since the beginning
|
|
of the current 1-day interval."
|
|
::= { vdslPerfDataEntry 29 }
|
|
|
|
vdslPerfDataCurr1DayInits OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the line initialization attempts since the
|
|
beginning of the current 1-day interval. This count
|
|
includes both successful and failed attempts."
|
|
::= { vdslPerfDataEntry 30 }
|
|
|
|
vdslPerfIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslPerfIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each Vtu performance
|
|
data collection interval. VDSL physical interfaces are
|
|
those ifEntries where ifType is equal to vdsl(97)."
|
|
::= { vdslMibObjects 5 }
|
|
|
|
vdslPerfIntervalEntry OBJECT-TYPE
|
|
SYNTAX VdslPerfIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the vdslPerfIntervalTable."
|
|
INDEX { ifIndex,
|
|
vdslPhysSide,
|
|
vdslPerfIntervalNumber }
|
|
::= { vdslPerfIntervalTable 1 }
|
|
|
|
VdslPerfIntervalEntry ::=
|
|
SEQUENCE
|
|
{
|
|
vdslPerfIntervalNumber Unsigned32,
|
|
vdslPerfIntervalLofs HCPerfIntervalCount,
|
|
vdslPerfIntervalLoss HCPerfIntervalCount,
|
|
vdslPerfIntervalLprs HCPerfIntervalCount,
|
|
vdslPerfIntervalLols HCPerfIntervalCount,
|
|
vdslPerfIntervalESs HCPerfIntervalCount,
|
|
vdslPerfIntervalSESs HCPerfIntervalCount,
|
|
vdslPerfIntervalUASs HCPerfIntervalCount,
|
|
vdslPerfIntervalInits HCPerfIntervalCount
|
|
}
|
|
|
|
vdslPerfIntervalNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance Data Interval number 1 is the most recent
|
|
previous interval; interval 96 is 24 hours ago.
|
|
Intervals 2 to 96 are optional."
|
|
::= { vdslPerfIntervalEntry 1 }
|
|
|
|
vdslPerfIntervalLofs OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was Loss
|
|
of Framing."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerfIntervalEntry 2 }
|
|
|
|
vdslPerfIntervalLoss OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was Loss
|
|
of Signal."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerfIntervalEntry 3 }
|
|
|
|
vdslPerfIntervalLprs OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was Loss
|
|
of Power."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerfIntervalEntry 4 }
|
|
|
|
vdslPerfIntervalLols OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of seconds in the interval when there was Loss
|
|
of Link."
|
|
::= { vdslPerfIntervalEntry 5 }
|
|
|
|
vdslPerfIntervalESs OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds (ES) in the interval. An Errored
|
|
Second is a one-second interval containing one or more CRC
|
|
anomalies, one or more LOS or LOF defects."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerfIntervalEntry 6 }
|
|
|
|
vdslPerfIntervalSESs OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Severely Errored Seconds in the interval."
|
|
::= { vdslPerfIntervalEntry 7 }
|
|
|
|
vdslPerfIntervalUASs OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Unavailable Seconds in the interval."
|
|
::= { vdslPerfIntervalEntry 8 }
|
|
|
|
vdslPerfIntervalInits OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the line initialization attempts during this
|
|
interval. This count includes both successful and
|
|
failed attempts."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerfIntervalEntry 9 }
|
|
|
|
vdslPerf1DayIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslPerf1DayIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each VDSL performance
|
|
data collection interval. This table contains live data
|
|
from equipment. As such, it is NOT persistent."
|
|
::= { vdslMibObjects 6 }
|
|
|
|
vdslPerf1DayIntervalEntry OBJECT-TYPE
|
|
SYNTAX VdslPerf1DayIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the vdslPerf1DayIntervalTable."
|
|
INDEX { ifIndex,
|
|
vdslPhysSide,
|
|
vdslPerf1DayIntervalNumber }
|
|
::= { vdslPerf1DayIntervalTable 1 }
|
|
|
|
VdslPerf1DayIntervalEntry ::=
|
|
SEQUENCE
|
|
{
|
|
vdslPerf1DayIntervalNumber Unsigned32,
|
|
vdslPerf1DayIntervalMoniSecs HCPerfTimeElapsed,
|
|
vdslPerf1DayIntervalLofs Unsigned32,
|
|
vdslPerf1DayIntervalLoss Unsigned32,
|
|
vdslPerf1DayIntervalLprs Unsigned32,
|
|
vdslPerf1DayIntervalLols Unsigned32,
|
|
vdslPerf1DayIntervalESs Unsigned32,
|
|
vdslPerf1DayIntervalSESs Unsigned32,
|
|
vdslPerf1DayIntervalUASs Unsigned32,
|
|
vdslPerf1DayIntervalInits Unsigned32
|
|
}
|
|
|
|
vdslPerf1DayIntervalNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..30)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"History Data Interval number. Interval 1 is the most
|
|
recent previous day; interval 30 is 30 days ago. Intervals
|
|
2 to 30 are optional."
|
|
::= { vdslPerf1DayIntervalEntry 1 }
|
|
|
|
vdslPerf1DayIntervalMoniSecs OBJECT-TYPE
|
|
SYNTAX HCPerfTimeElapsed
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time in the 1-day interval over which the
|
|
performance monitoring information is actually counted.
|
|
This value will be the same as the interval duration except
|
|
in a situation where performance monitoring data could not
|
|
be collected for any reason."
|
|
::= { vdslPerf1DayIntervalEntry 2 }
|
|
|
|
vdslPerf1DayIntervalLofs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Loss of Frame (LOF) Seconds during the 1-day
|
|
interval as measured by vdslPerf1DayIntervalMoniSecs."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerf1DayIntervalEntry 3 }
|
|
|
|
vdslPerf1DayIntervalLoss OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Loss of Signal (LOS) Seconds during the 1-day
|
|
interval as measured by vdslPerf1DayIntervalMoniSecs."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerf1DayIntervalEntry 4 }
|
|
|
|
vdslPerf1DayIntervalLprs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Loss of Power (LPR) Seconds during the 1-day
|
|
interval as measured by vdslPerf1DayIntervalMoniSecs."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerf1DayIntervalEntry 5 }
|
|
|
|
vdslPerf1DayIntervalLols OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Loss of Link (LOL) Seconds during the 1-day
|
|
interval as measured by vdslPerf1DayIntervalMoniSecs."
|
|
::= { vdslPerf1DayIntervalEntry 6 }
|
|
|
|
vdslPerf1DayIntervalESs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Errored Seconds (ES) during the 1-day
|
|
interval as measured by vdslPerf1DayIntervalMoniSecs."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerf1DayIntervalEntry 7 }
|
|
|
|
vdslPerf1DayIntervalSESs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Severely Errored Seconds (SES) during the 1-day
|
|
interval as measured by vdslPerf1DayIntervalMoniSecs."
|
|
::= { vdslPerf1DayIntervalEntry 8 }
|
|
|
|
vdslPerf1DayIntervalUASs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of Unavailable Seconds (UAS) during the 1-day
|
|
interval as measured by vdslPerf1DayIntervalMoniSecs."
|
|
::= { vdslPerf1DayIntervalEntry 9 }
|
|
|
|
vdslPerf1DayIntervalInits OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the line initialization attempts during the
|
|
1-day interval as measured by vdslPerf1DayIntervalMoniSecs.
|
|
This count includes both successful and failed attempts."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslPerf1DayIntervalEntry 10 }
|
|
|
|
vdslChanPerfDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslChanPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each Vtu channel.
|
|
VDSL channel interfaces are those ifEntries where
|
|
ifType is equal to interleave(124) or fast(125)."
|
|
::= { vdslMibObjects 7 }
|
|
|
|
vdslChanPerfDataEntry OBJECT-TYPE
|
|
SYNTAX VdslChanPerfDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the vdslChanPerfDataTable."
|
|
INDEX { ifIndex,
|
|
vdslPhysSide }
|
|
::= { vdslChanPerfDataTable 1 }
|
|
|
|
VdslChanPerfDataEntry ::=
|
|
SEQUENCE
|
|
{
|
|
vdslChanValidIntervals HCPerfValidIntervals,
|
|
vdslChanInvalidIntervals HCPerfInvalidIntervals,
|
|
vdslChanFixedOctets ZeroBasedCounter64,
|
|
vdslChanBadBlks ZeroBasedCounter64,
|
|
vdslChanCurr15MinTimeElapsed HCPerfTimeElapsed,
|
|
vdslChanCurr15MinFixedOctets HCPerfCurrentCount,
|
|
vdslChanCurr15MinBadBlks HCPerfCurrentCount,
|
|
vdslChan1DayValidIntervals HCPerfValidIntervals,
|
|
vdslChan1DayInvalidIntervals HCPerfInvalidIntervals,
|
|
vdslChanCurr1DayTimeElapsed HCPerfTimeElapsed,
|
|
vdslChanCurr1DayFixedOctets HCPerfCurrentCount,
|
|
vdslChanCurr1DayBadBlks HCPerfCurrentCount
|
|
}
|
|
|
|
vdslChanValidIntervals OBJECT-TYPE
|
|
SYNTAX HCPerfValidIntervals
|
|
UNITS "intervals"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid Intervals per definition found in
|
|
HC-PerfHist-TC-MIB."
|
|
::= { vdslChanPerfDataEntry 1 }
|
|
|
|
vdslChanInvalidIntervals OBJECT-TYPE
|
|
SYNTAX HCPerfInvalidIntervals
|
|
UNITS "intervals"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Invalid Intervals per definition found in
|
|
HC-PerfHist-TC-MIB."
|
|
::= { vdslChanPerfDataEntry 2 }
|
|
|
|
vdslChanFixedOctets OBJECT-TYPE
|
|
SYNTAX ZeroBasedCounter64
|
|
UNITS "octets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of corrected octets since the unit was last reset."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslChanPerfDataEntry 3 }
|
|
|
|
vdslChanBadBlks OBJECT-TYPE
|
|
SYNTAX ZeroBasedCounter64
|
|
UNITS "blocks"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of uncorrectable blocks since the unit was last
|
|
reset."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslChanPerfDataEntry 4 }
|
|
|
|
vdslChanCurr15MinTimeElapsed OBJECT-TYPE
|
|
SYNTAX HCPerfTimeElapsed
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total elapsed seconds in this interval."
|
|
::= { vdslChanPerfDataEntry 5 }
|
|
|
|
vdslChanCurr15MinFixedOctets OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
UNITS "octets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of corrected octets in this interval."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslChanPerfDataEntry 6 }
|
|
|
|
vdslChanCurr15MinBadBlks OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
UNITS "blocks"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of uncorrectable blocks in this interval."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslChanPerfDataEntry 7 }
|
|
|
|
vdslChan1DayValidIntervals OBJECT-TYPE
|
|
SYNTAX HCPerfValidIntervals
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Valid Intervals per definition found in
|
|
HC-PerfHist-TC-MIB."
|
|
::= { vdslChanPerfDataEntry 8 }
|
|
|
|
vdslChan1DayInvalidIntervals OBJECT-TYPE
|
|
SYNTAX HCPerfInvalidIntervals
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Invalid Intervals per definition found in
|
|
HC-PerfHist-TC-MIB."
|
|
::= { vdslChanPerfDataEntry 9 }
|
|
|
|
vdslChanCurr1DayTimeElapsed OBJECT-TYPE
|
|
SYNTAX HCPerfTimeElapsed
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds that have elapsed since the beginning
|
|
of the current 1-day interval."
|
|
::= { vdslChanPerfDataEntry 10 }
|
|
|
|
vdslChanCurr1DayFixedOctets OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
UNITS "octets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of corrected octets since the beginning of the
|
|
current 1-day interval."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslChanPerfDataEntry 11 }
|
|
|
|
vdslChanCurr1DayBadBlks OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
UNITS "blocks"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of uncorrectable blocks since the beginning of the
|
|
current 1-day interval."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslChanPerfDataEntry 12 }
|
|
|
|
vdslChanIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslChanIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each Vtu channel data
|
|
collection interval. VDSL channel interfaces are those
|
|
ifEntries where ifType is equal to interleave(124) or
|
|
fast(125)."
|
|
|
|
::= { vdslMibObjects 8 }
|
|
|
|
vdslChanIntervalEntry OBJECT-TYPE
|
|
SYNTAX VdslChanIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the vdslChanIntervalTable."
|
|
INDEX { ifIndex,
|
|
vdslPhysSide,
|
|
vdslChanIntervalNumber }
|
|
::= { vdslChanIntervalTable 1 }
|
|
|
|
VdslChanIntervalEntry ::=
|
|
SEQUENCE
|
|
{
|
|
vdslChanIntervalNumber Unsigned32,
|
|
vdslChanIntervalFixedOctets HCPerfIntervalCount,
|
|
vdslChanIntervalBadBlks HCPerfIntervalCount
|
|
}
|
|
|
|
vdslChanIntervalNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance Data Interval number 1 is the most recent
|
|
previous interval; interval 96 is 24 hours ago.
|
|
Intervals 2 to 96 are optional."
|
|
::= { vdslChanIntervalEntry 1 }
|
|
|
|
vdslChanIntervalFixedOctets OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalCount
|
|
UNITS "octets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of corrected octets in this interval."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslChanIntervalEntry 2 }
|
|
|
|
vdslChanIntervalBadBlks OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalCount
|
|
UNITS "blocks"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of uncorrectable blocks in this interval."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslChanIntervalEntry 3 }
|
|
|
|
vdslChan1DayIntervalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslChan1DayIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides one row for each VDSL performance
|
|
data collection interval. This table contains live data
|
|
from equipment. As such, it is NOT persistent."
|
|
::= { vdslMibObjects 9 }
|
|
|
|
vdslChan1DayIntervalEntry OBJECT-TYPE
|
|
SYNTAX VdslChan1DayIntervalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the vdslChan1DayIntervalTable."
|
|
INDEX { ifIndex,
|
|
vdslPhysSide,
|
|
vdslChan1DayIntervalNumber }
|
|
::= { vdslChan1DayIntervalTable 1 }
|
|
|
|
VdslChan1DayIntervalEntry ::=
|
|
SEQUENCE
|
|
{
|
|
vdslChan1DayIntervalNumber Unsigned32,
|
|
vdslChan1DayIntervalMoniSecs HCPerfTimeElapsed,
|
|
vdslChan1DayIntervalFixedOctets HCPerfCurrentCount,
|
|
vdslChan1DayIntervalBadBlks HCPerfCurrentCount
|
|
}
|
|
|
|
vdslChan1DayIntervalNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..30)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"History Data Interval number. Interval 1 is the most
|
|
recent previous day; interval 30 is 30 days ago. Intervals
|
|
2 to 30 are optional."
|
|
::= { vdslChan1DayIntervalEntry 1 }
|
|
|
|
vdslChan1DayIntervalMoniSecs OBJECT-TYPE
|
|
SYNTAX HCPerfTimeElapsed
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time in the 1-day interval over which the
|
|
performance monitoring information is actually counted.
|
|
This value will be the same as the interval duration except
|
|
in a situation where performance monitoring data could not
|
|
be collected for any reason."
|
|
::= { vdslChan1DayIntervalEntry 2 }
|
|
|
|
vdslChan1DayIntervalFixedOctets OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
UNITS "octets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of corrected octets in this interval."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslChan1DayIntervalEntry 3 }
|
|
|
|
vdslChan1DayIntervalBadBlks OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
UNITS "blocks"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of uncorrectable blocks in this interval."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
::= { vdslChan1DayIntervalEntry 4 }
|
|
|
|
--
|
|
-- profile tables
|
|
--
|
|
|
|
vdslLineConfProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslLineConfProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains information on the VDSL line
|
|
configuration. One entry in this table reflects a
|
|
profile defined by a manager which can be used to
|
|
configure the VDSL line.
|
|
|
|
Entries in this table MUST be maintained in a
|
|
persistent manner."
|
|
::= { vdslMibObjects 11 }
|
|
|
|
vdslLineConfProfileEntry OBJECT-TYPE
|
|
SYNTAX VdslLineConfProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry consists of a list of parameters that
|
|
represents the configuration of a VDSL line.
|
|
|
|
A default profile with an index of 'DEFVAL', will
|
|
always exist and its parameters will be set to vendor
|
|
specific values, unless otherwise specified in this
|
|
document."
|
|
INDEX { vdslLineConfProfileName }
|
|
::= { vdslLineConfProfileTable 1 }
|
|
|
|
VdslLineConfProfileEntry ::=
|
|
SEQUENCE
|
|
{
|
|
vdslLineConfProfileName SnmpAdminString,
|
|
vdslLineConfDownRateMode INTEGER,
|
|
vdslLineConfUpRateMode INTEGER,
|
|
vdslLineConfDownMaxPwr Unsigned32,
|
|
vdslLineConfUpMaxPwr Unsigned32,
|
|
vdslLineConfDownMaxSnrMgn Unsigned32,
|
|
vdslLineConfDownMinSnrMgn Unsigned32,
|
|
vdslLineConfDownTargetSnrMgn Unsigned32,
|
|
vdslLineConfUpMaxSnrMgn Unsigned32,
|
|
vdslLineConfUpMinSnrMgn Unsigned32,
|
|
vdslLineConfUpTargetSnrMgn Unsigned32,
|
|
vdslLineConfDownFastMaxDataRate Unsigned32,
|
|
vdslLineConfDownFastMinDataRate Unsigned32,
|
|
vdslLineConfDownSlowMaxDataRate Unsigned32,
|
|
vdslLineConfDownSlowMinDataRate Unsigned32,
|
|
vdslLineConfUpFastMaxDataRate Unsigned32,
|
|
vdslLineConfUpFastMinDataRate Unsigned32,
|
|
vdslLineConfUpSlowMaxDataRate Unsigned32,
|
|
vdslLineConfUpSlowMinDataRate Unsigned32,
|
|
vdslLineConfDownRateRatio Unsigned32,
|
|
vdslLineConfUpRateRatio Unsigned32,
|
|
vdslLineConfDownMaxInterDelay Unsigned32,
|
|
vdslLineConfUpMaxInterDelay Unsigned32,
|
|
vdslLineConfDownPboControl INTEGER,
|
|
vdslLineConfUpPboControl INTEGER,
|
|
vdslLineConfDownPboLevel Unsigned32,
|
|
vdslLineConfUpPboLevel Unsigned32,
|
|
vdslLineConfDeploymentScenario INTEGER,
|
|
vdslLineConfAdslPresence INTEGER,
|
|
vdslLineConfApplicableStandard INTEGER,
|
|
vdslLineConfBandPlan INTEGER,
|
|
vdslLineConfBandPlanFx Unsigned32,
|
|
vdslLineConfBandOptUsage INTEGER,
|
|
vdslLineConfUpPsdTemplate INTEGER,
|
|
vdslLineConfDownPsdTemplate INTEGER,
|
|
vdslLineConfHamBandMask BITS,
|
|
vdslLineConfCustomNotch1Start Unsigned32,
|
|
vdslLineConfCustomNotch1Stop Unsigned32,
|
|
vdslLineConfCustomNotch2Start Unsigned32,
|
|
vdslLineConfCustomNotch2Stop Unsigned32,
|
|
vdslLineConfDownTargetSlowBurst Unsigned32,
|
|
vdslLineConfUpTargetSlowBurst Unsigned32,
|
|
vdslLineConfDownMaxFastFec Unsigned32,
|
|
vdslLineConfUpMaxFastFec Unsigned32,
|
|
vdslLineConfLineType INTEGER,
|
|
vdslLineConfProfRowStatus RowStatus
|
|
}
|
|
|
|
vdslLineConfProfileName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies a row in this table.
|
|
|
|
A default profile with an index of 'DEFVAL', will
|
|
always exist and its parameters will be set to vendor
|
|
specific values, unless otherwise specified in this
|
|
document."
|
|
::= { vdslLineConfProfileEntry 1 }
|
|
|
|
vdslLineConfDownRateMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
manual(1),
|
|
adaptAtInit(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the rate selection behavior for the line
|
|
in the downstream direction.
|
|
|
|
manual(1) forces the rate to the configured rate
|
|
adaptAtInit(2) adapts the line based upon line quality."
|
|
DEFVAL { adaptAtInit }
|
|
::= { vdslLineConfProfileEntry 2 }
|
|
|
|
vdslLineConfUpRateMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
manual(1),
|
|
adaptAtInit(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the rate selection behavior for the line
|
|
in the upstream direction.
|
|
|
|
manual(1) forces the rate to the configured rate
|
|
adaptAtInit(2) adapts the line based upon line quality."
|
|
DEFVAL { adaptAtInit }
|
|
::= { vdslLineConfProfileEntry 3 }
|
|
|
|
vdslLineConfDownMaxPwr OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..58)
|
|
UNITS "0.25dBm"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum aggregate downstream power
|
|
level in the range 0 to 14.5 dBm."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 4 }
|
|
|
|
vdslLineConfUpMaxPwr OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..58)
|
|
UNITS "0.25dBm"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum aggregate upstream power
|
|
level in the range 0 to 14.5 dBm."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 5 }
|
|
|
|
vdslLineConfDownMaxSnrMgn OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..127)
|
|
UNITS "0.25dBm"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum downstream Signal/Noise Margin
|
|
in units of 0.25 dB, for a range of 0 to 31.75 dB."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 6 }
|
|
|
|
vdslLineConfDownMinSnrMgn OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..127)
|
|
UNITS "0.25dBm"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the minimum downstream Signal/Noise Margin
|
|
in units of 0.25 dB, for a range of 0 to 31.75 dB."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 7 }
|
|
|
|
vdslLineConfDownTargetSnrMgn OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..127)
|
|
UNITS "0.25dBm"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the target downstream Signal/Noise Margin
|
|
in units of 0.25 dB, for a range of 0 to 31.75 dB.
|
|
This is the Noise Margin the transceivers must achieve
|
|
with a BER of 10^-7 or better to successfully complete
|
|
initialization."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 8 }
|
|
|
|
vdslLineConfUpMaxSnrMgn OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..127)
|
|
UNITS "0.25dBm"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum upstream Signal/Noise Margin
|
|
in units of 0.25 dB, for a range of 0 to 31.75 dB."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 9 }
|
|
|
|
vdslLineConfUpMinSnrMgn OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..127)
|
|
UNITS "0.25dBm"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the minimum upstream Signal/Noise Margin
|
|
in units of 0.25 dB, for a range of 0 to 31.75 dB."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 10 }
|
|
|
|
vdslLineConfUpTargetSnrMgn OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..127)
|
|
UNITS "0.25dBm"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the target upstream Signal/Noise Margin in
|
|
units of 0.25 dB, for a range of 0 to 31.75 dB. This
|
|
is the Noise Margin the transceivers must achieve with
|
|
a BER of 10^-7 or better to successfully complete
|
|
initialization."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 11 }
|
|
|
|
vdslLineConfDownFastMaxDataRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum downstream fast channel
|
|
data rate in steps of 1000 bits/second."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 12 }
|
|
|
|
vdslLineConfDownFastMinDataRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the minimum downstream fast channel
|
|
data rate in steps of 1000 bits/second."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 13 }
|
|
|
|
vdslLineConfDownSlowMaxDataRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum downstream slow channel
|
|
data rate in steps of 1000 bits/second.
|
|
|
|
The maximum aggregate downstream transmit speed
|
|
of the line can be derived from the sum of maximum
|
|
downstream fast and slow channel data rates."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 14 }
|
|
|
|
vdslLineConfDownSlowMinDataRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the minimum downstream slow channel
|
|
data rate in steps of 1000 bits/second.
|
|
|
|
The minimum aggregate downstream transmit speed
|
|
of the line can be derived from the sum of minimum
|
|
downstream fast and slow channel data rates."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 15 }
|
|
|
|
vdslLineConfUpFastMaxDataRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum upstream fast channel
|
|
data rate in steps of 1000 bits/second.
|
|
|
|
The maximum aggregate upstream transmit speed
|
|
of the line can be derived from the sum of maximum
|
|
upstream fast and slow channel data rates."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 16 }
|
|
|
|
vdslLineConfUpFastMinDataRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the minimum upstream fast channel
|
|
data rate in steps of 1000 bits/second.
|
|
The minimum aggregate upstream transmit speed
|
|
of the line can be derived from the sum of minimum
|
|
upstream fast and slow channel data rates."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 17 }
|
|
|
|
vdslLineConfUpSlowMaxDataRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum upstream slow channel
|
|
data rate in steps of 1000 bits/second."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 18 }
|
|
|
|
vdslLineConfUpSlowMinDataRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the minimum upstream slow channel
|
|
data rate in steps of 1000 bits/second."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 19 }
|
|
|
|
vdslLineConfDownRateRatio OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For dynamic rate adaptation at startup, the allocation
|
|
of data rate in excess of the minimum data rate for each
|
|
channel is controlled by the object. This object specifies
|
|
the ratio of the allocation of the excess data rate between
|
|
the fast and the slow channels. This allocation represents
|
|
downstream Fast Channel Allocation / Slow Channel
|
|
Allocation."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 20 }
|
|
|
|
vdslLineConfUpRateRatio OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For dynamic rate adaptation at startup, the allocation
|
|
of data rate in excess of the minimum data rate for each
|
|
channel is controlled by the object. This object specifies
|
|
the ratio of the allocation of the excess data rate between
|
|
the fast and the slow channels. This allocation represents
|
|
upstream Fast Channel Allocation/Slow Channel Allocation."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 21 }
|
|
|
|
vdslLineConfDownMaxInterDelay OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum interleave delay for the
|
|
downstream slow channel."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 22 }
|
|
|
|
vdslLineConfUpMaxInterDelay OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum interleave delay for the
|
|
upstream slow channel."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 23 }
|
|
|
|
vdslLineConfDownPboControl OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
auto(2),
|
|
manual(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Downstream power backoff (PBO) control for this
|
|
line. For transceivers which do not support downstream
|
|
PBO control, this object MUST be fixed at disabled(1).
|
|
If auto(2) is selected, the transceiver will automatically
|
|
adjust the power backoff. If manual(3) is selected,
|
|
then the transceiver will use the value from
|
|
vdslLineConfDownPboLevel."
|
|
DEFVAL { disabled }
|
|
::= { vdslLineConfProfileEntry 24 }
|
|
|
|
vdslLineConfUpPboControl OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
auto(2),
|
|
manual(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upstream power backoff (PBO) control for this
|
|
line. For transceivers which do not support upstream
|
|
PBO control, this object MUST be fixed at disabled(1).
|
|
If auto(2) is selected, the transceiver will automatically
|
|
adjust the power backoff. If manual(3) is selected,
|
|
then the transceiver will use the value from
|
|
vdslLineConfUpPboLevel."
|
|
DEFVAL { disabled }
|
|
::= { vdslLineConfProfileEntry 25 }
|
|
|
|
vdslLineConfDownPboLevel OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..160)
|
|
UNITS "0.25dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the downstream backoff level to be used
|
|
when vdslLineConfDownPboControl = manual(3)."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 26 }
|
|
|
|
vdslLineConfUpPboLevel OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..160)
|
|
UNITS "0.25dB"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the upstream backoff level to be used
|
|
when vdslLineConfUpPboControl = manual(3)."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 27 }
|
|
|
|
vdslLineConfDeploymentScenario OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
fttCab(1),
|
|
fttEx(2),
|
|
other(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VDSL line deployment scenario. When using
|
|
fttCab(1), the VTU-C is located in a street cabinet.
|
|
When using fttEx(2), the VTU-C is located at the
|
|
central office. Changes to this value will have
|
|
no effect on the transceiver."
|
|
REFERENCE "DSL Forum TR-057"
|
|
DEFVAL { fttCab }
|
|
::= { vdslLineConfProfileEntry 28 }
|
|
|
|
vdslLineConfAdslPresence OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
adslOverPots(2),
|
|
adslOverISDN(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates presence of ADSL service in the associated
|
|
cable bundle/binder.
|
|
|
|
none(1) indicates no ADSL service in the bundle
|
|
adslOverPots(2) indicates ADSL service over POTS is
|
|
present in the bundle
|
|
adslOverISDN(3) indicates ADSL service over ISDN is
|
|
present in the bundle"
|
|
DEFVAL { none }
|
|
::= { vdslLineConfProfileEntry 29 }
|
|
|
|
vdslLineConfApplicableStandard OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ansi(1),
|
|
etsi(2),
|
|
itu(3),
|
|
other(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VDSL standard to be used for the line.
|
|
|
|
ansi(1) indicates ANSI standard
|
|
etsi(2) indicates ETSI standard
|
|
itu(3) indicates ITU standard
|
|
other(4) indicates a standard other than the above."
|
|
DEFVAL { ansi }
|
|
::= { vdslLineConfProfileEntry 30 }
|
|
|
|
vdslLineConfBandPlan OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
bandPlan997(1),
|
|
bandPlan998(2),
|
|
bandPlanFx(3),
|
|
other(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VDSL band plan to be used for the line.
|
|
|
|
bandPlan997(1) is to be used for
|
|
ITU-T G.993.1 Bandplan-B
|
|
ETSI Bandplan
|
|
ANSI Plan 997
|
|
|
|
bandPlan998(2) is to be used for
|
|
ITU-T G.993.1 Bandplan-A
|
|
ANSI Plan 998
|
|
|
|
bandPlanFx(3) is to be used for
|
|
ITU-T G.993.1 Bandplan-C.
|
|
|
|
other(4) is to be used for
|
|
non-standard bandplans.
|
|
|
|
If this object is set to bandPlanFx(3), then the
|
|
object vdslLineConfBandPlanFx MUST also be set."
|
|
DEFVAL { bandPlan997 }
|
|
::= { vdslLineConfProfileEntry 31 }
|
|
|
|
vdslLineConfBandPlanFx OBJECT-TYPE
|
|
SYNTAX Unsigned32 (3750..12000)
|
|
UNITS "kHz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frequency limit between bands D2 and U2 when
|
|
vdslLineConfBandPlan is set to bandPlanFx(3)."
|
|
DEFVAL { 3750 }
|
|
::= { vdslLineConfProfileEntry 32 }
|
|
|
|
vdslLineConfBandOptUsage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unused(1),
|
|
upstream(2),
|
|
downstream(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the VDSL link use of the optional frequency
|
|
range [25kHz - 138kHz] (Opt).
|
|
|
|
unused(1) indicates Opt is unused
|
|
upstream(2) indicates Opt usage is for upstream
|
|
downstream(3) indicates Opt usage is for downstream."
|
|
REFERENCE "ITU-T G.993.1, section 6.1"
|
|
DEFVAL { unused }
|
|
::= { vdslLineConfProfileEntry 33 }
|
|
|
|
vdslLineConfUpPsdTemplate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
templateMask1(1),
|
|
templateMask2(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upstream PSD template to be used for the line.
|
|
Here, templateMask1(1) refers to a notched mask that
|
|
limits the transmitted PSD within the internationally
|
|
standardized HAM (Handheld Amateur Radio) radio bands,
|
|
while templateMask2(2) refers to an unnotched mask.
|
|
|
|
The masks themselves depend upon the applicable
|
|
standard being used (vdslLineConfApplicableStandard)."
|
|
REFERENCE "DSL TR-057"
|
|
DEFVAL { templateMask1 }
|
|
::= { vdslLineConfProfileEntry 34 }
|
|
|
|
|
|
vdslLineConfDownPsdTemplate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
templateMask1(1),
|
|
templateMask2(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The downstream PSD template to be used for the line.
|
|
Here, templateMask1(1) refers to a notched mask that
|
|
limits the transmitted PSD within the internationally
|
|
standardized HAM (Handheld Amateur Radio) radio bands,
|
|
while templateMask2(2) refers to an unnotched mask.
|
|
|
|
The masks themselves depend upon the applicable
|
|
standard being used (vdslLineConfApplicableStandard)."
|
|
REFERENCE "DSL TR-057"
|
|
DEFVAL { templateMask1 }
|
|
::= { vdslLineConfProfileEntry 35 }
|
|
|
|
vdslLineConfHamBandMask OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
customNotch1(0), -- custom (region-specific) notch
|
|
customNotch2(1), -- custom (region-specific) notch
|
|
amateurBand30m(2), -- amateur radio band notch
|
|
amateurBand40m(3), -- amateur radio band notch
|
|
amateurBand80m(4), -- amateur radio band notch
|
|
amateurBand160m(5) -- amateur radio band notch
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmit power spectral density mask code, used
|
|
to avoid interference with HAM (Handheld Amateur Radio)
|
|
radio bands by introducing power control (notching) in one
|
|
or more of these bands.
|
|
|
|
Amateur radio band notching is defined in the VDSL
|
|
spectrum as follows:
|
|
|
|
Band Start Frequency Stop Frequency
|
|
---- ------------------ --------------------------------
|
|
30m 1810 kHz 2000 kHz
|
|
40m 3500 kHz 3800 kHz (ETSI); 4000 kHz (ANSI)
|
|
80m 7000 kHz 7100 kHz (ETSI); 7300 kHz (ANSI)
|
|
160m 10100 kHz 10150 kHz
|
|
|
|
Notching for each standard band can be enabled or disabled
|
|
via the bit mask.
|
|
|
|
Two custom notches may be specified. If either of these
|
|
are enabled via the bit mask, then the following objects
|
|
MUST be specified:
|
|
|
|
If customNotch1 is enabled, then both
|
|
vdslLineConfCustomNotch1Start
|
|
vdslLineConfCustomNotch1Stop
|
|
MUST be specified.
|
|
|
|
If customNotch2 is enabled, then both
|
|
vdslLineConfCustomNotch2Start
|
|
vdslLineConfCustomNotch2Stop
|
|
MUST be specified."
|
|
REFERENCE "DSLF TR-057, section 2.6"
|
|
DEFVAL { { } }
|
|
::= { vdslLineConfProfileEntry 36 }
|
|
|
|
vdslLineConfCustomNotch1Start OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "kHz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the start frequency of custom HAM (Handheld
|
|
Amateur Radio) notch 1. vdslLineConfCustomNotch1Start MUST
|
|
be less than or equal to vdslLineConfCustomNotch1Stop."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 37 }
|
|
|
|
vdslLineConfCustomNotch1Stop OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "kHz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the stop frequency of custom HAM (Handheld
|
|
Amateur Radio) notch 1. vdslLineConfCustomNotch1Stop MUST
|
|
be greater than or equal to vdslLineConfCustomNotch1Start."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 38 }
|
|
|
|
vdslLineConfCustomNotch2Start OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "kHz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the start frequency of custom HAM (Handheld
|
|
Amateur Radio) notch 2. vdslLineConfCustomNotch2Start MUST
|
|
be less than or equal to vdslLineConfCustomNotch2Stop."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 39 }
|
|
|
|
vdslLineConfCustomNotch2Stop OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "kHz"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the stop frequency of custom HAM (Handheld
|
|
Amateur Radio) notch 2. vdslLineConfCustomNotch2Stop MUST
|
|
be greater than or equal to vdslLineConfCustomNotch2Start."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 40 }
|
|
|
|
vdslLineConfDownTargetSlowBurst OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1275)
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the target level of impulse noise (burst)
|
|
protection for an interleaved (slow) channel."
|
|
REFERENCE "ITU-T G.997.1, section 7.3.2.3"
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 41 }
|
|
|
|
vdslLineConfUpTargetSlowBurst OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1275)
|
|
UNITS "microseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the target level of impulse noise (burst)
|
|
protection for an interleaved (slow) channel."
|
|
REFERENCE "ITU-T G.997.1, section 7.3.2.3"
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 42 }
|
|
|
|
vdslLineConfDownMaxFastFec OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..50)
|
|
UNITS "%"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter provisions the maximum level of Forward
|
|
Error Correction (FEC) redundancy related overhead to
|
|
be maintained for a fast channel."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 43 }
|
|
|
|
vdslLineConfUpMaxFastFec OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..50)
|
|
UNITS "%"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter provisions the maximum level of Forward
|
|
Error Correction (FEC) redundancy related overhead to
|
|
be maintained for a fast channel."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineConfProfileEntry 44 }
|
|
|
|
vdslLineConfLineType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noChannel(1), -- no channels exist
|
|
fastOnly(2), -- only fast channel exists
|
|
interleavedOnly(3), -- only interleaved channel exists
|
|
fastOrInterleaved(4), -- either fast or interleaved channel
|
|
-- exist, but only one at a time
|
|
fastAndInterleaved(5) -- both fast and interleaved channels
|
|
-- exist
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter provisions the VDSL physical entity at
|
|
start-up by defining whether and how the line will be
|
|
channelized, i.e., which channel type(s) are supported.
|
|
If the line is to be channelized, the value will be other
|
|
than noChannel(1).
|
|
|
|
This configuration can be activated only during start-up.
|
|
Afterwards, the value of vdslLineType coincides with the
|
|
value of vdslLineConfLineType. Depending on this value,
|
|
the corresponding entries in the ifTable for the
|
|
interleaved and the fast channels are enabled or disabled
|
|
according to the value of their ifOperStatus.
|
|
|
|
Defined values are:
|
|
noChannel(1) -- no channels exist
|
|
fastOnly(2) -- only fast channel exists
|
|
interleavedOnly(3) -- only interleaved channel exists
|
|
fastOrInterleaved(4) -- either fast or interleaved channel
|
|
-- exists, but only one at a time
|
|
fastAndInterleaved(5) -- both fast and interleaved channels
|
|
-- exist
|
|
|
|
Note that 'slow' and 'interleaved' refer to the same
|
|
channel."
|
|
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
|
|
DEFVAL { noChannel }
|
|
::= { vdslLineConfProfileEntry 45 }
|
|
|
|
vdslLineConfProfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or modify or
|
|
delete an existing row in this table.
|
|
|
|
A profile activated by setting this object to 'active'.
|
|
When 'active' is set, the system will validate the profile.
|
|
|
|
Before a profile can be deleted or taken out of service
|
|
(by setting this object to 'destroy' or 'outOfService'),
|
|
it must be first unreferenced from all associated lines.
|
|
|
|
An 'active' profile may be modified at any time. Note
|
|
that some changes may require that any referenced lines be
|
|
restarted (e.g., vdslLineConfLineType)."
|
|
::= { vdslLineConfProfileEntry 46 }
|
|
|
|
--
|
|
-- Alarm configuration profile table
|
|
--
|
|
|
|
vdslLineAlarmConfProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VdslLineAlarmConfProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains information on the VDSL line alarm
|
|
configuration. One entry in this table reflects a profile
|
|
defined by a manager which can be used to configure the
|
|
VDSL line alarm thresholds.
|
|
Entries in this table MUST be maintained in a
|
|
persistent manner."
|
|
::= { vdslMibObjects 20 }
|
|
|
|
vdslLineAlarmConfProfileEntry OBJECT-TYPE
|
|
SYNTAX VdslLineAlarmConfProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry consists of a list of parameters that
|
|
represents the configuration of a VDSL line alarm
|
|
profile.
|
|
|
|
A default profile with an index of 'DEFVAL', will
|
|
always exist and its parameters will be set to vendor
|
|
specific values, unless otherwise specified in this
|
|
document."
|
|
INDEX { vdslLineAlarmConfProfileName }
|
|
::= { vdslLineAlarmConfProfileTable 1 }
|
|
|
|
VdslLineAlarmConfProfileEntry ::=
|
|
SEQUENCE
|
|
{
|
|
vdslLineAlarmConfProfileName SnmpAdminString,
|
|
vdslLineAlarmConfThresh15MinLofs HCPerfIntervalThreshold,
|
|
vdslLineAlarmConfThresh15MinLoss HCPerfIntervalThreshold,
|
|
vdslLineAlarmConfThresh15MinLprs HCPerfIntervalThreshold,
|
|
vdslLineAlarmConfThresh15MinLols HCPerfIntervalThreshold,
|
|
vdslLineAlarmConfThresh15MinESs HCPerfIntervalThreshold,
|
|
vdslLineAlarmConfThresh15MinSESs HCPerfIntervalThreshold,
|
|
vdslLineAlarmConfThresh15MinUASs HCPerfIntervalThreshold,
|
|
vdslLineAlarmConfInitFailure TruthValue,
|
|
vdslLineAlarmConfProfRowStatus RowStatus
|
|
}
|
|
|
|
vdslLineAlarmConfProfileName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name for this profile as specified by an
|
|
administrator."
|
|
::= { vdslLineAlarmConfProfileEntry 1 }
|
|
|
|
vdslLineAlarmConfThresh15MinLofs OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalThreshold
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of
|
|
loss of frame seconds (lofs) within any given 15-minute
|
|
performance data collection interval. If the value of
|
|
loss of frame seconds in a particular 15-minute collection
|
|
interval reaches/exceeds this value, a
|
|
vdslPerfLofsThreshNotification notification will be
|
|
generated. No more than one notification will be sent
|
|
per interval."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineAlarmConfProfileEntry 2 }
|
|
|
|
vdslLineAlarmConfThresh15MinLoss OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalThreshold
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of
|
|
loss of signal seconds (loss) within any given 15-minute
|
|
performance data collection interval. If the value of
|
|
loss of signal seconds in a particular 15-minute
|
|
collection interval reaches/exceeds this value, a
|
|
vdslPerfLossThreshNotification notification will be
|
|
generated. One notification will be sent per interval
|
|
per endpoint."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineAlarmConfProfileEntry 3 }
|
|
|
|
vdslLineAlarmConfThresh15MinLprs OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalThreshold
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of
|
|
loss of power seconds (lprs) within any given 15-minute
|
|
performance data collection interval. If the value of
|
|
loss of power seconds in a particular 15-minute collection
|
|
interval reaches/exceeds this value, a
|
|
vdslPerfLprsThreshNotification notification will be
|
|
generated. No more than one notification will be sent
|
|
per interval."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineAlarmConfProfileEntry 4 }
|
|
|
|
vdslLineAlarmConfThresh15MinLols OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalThreshold
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of
|
|
loss of link seconds (lols) within any given 15-minute
|
|
performance data collection interval. If the value of
|
|
loss of power seconds in a particular 15-minute collection
|
|
interval reaches/exceeds this value, a
|
|
vdslPerfLolsThreshNotification notification will be
|
|
generated. No more than one notification will be sent
|
|
per interval."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineAlarmConfProfileEntry 5 }
|
|
|
|
vdslLineAlarmConfThresh15MinESs OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalThreshold
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of
|
|
errored seconds (ESs) within any given 15-minute
|
|
performance data collection interval. If the value of
|
|
errored seconds in a particular 15-minute collection
|
|
interval reaches/exceeds this value, a
|
|
vdslPerfESsThreshNotification notification will be
|
|
generated. No more than one notification will be sent
|
|
per interval."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineAlarmConfProfileEntry 6 }
|
|
|
|
vdslLineAlarmConfThresh15MinSESs OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalThreshold
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of
|
|
severely errored seconds (SESs) within any given 15-minute
|
|
performance data collection interval. If the value of
|
|
severely errored seconds in a particular 15-minute
|
|
collection interval reaches/exceeds this value, a
|
|
vdslPerfSESsThreshNotification notification will be
|
|
generated. No more than one notification will be sent
|
|
per interval."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineAlarmConfProfileEntry 7 }
|
|
|
|
vdslLineAlarmConfThresh15MinUASs OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalThreshold
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the threshold for the number of
|
|
unavailable seconds (UASs) within any given 15-minute
|
|
performance data collection interval. If the value of
|
|
unavailable seconds in a particular 15-minute collection
|
|
interval reaches/exceeds this value, a
|
|
vdslPerfUASsThreshNotification notification will be
|
|
generated. No more than one notification will be sent
|
|
per interval."
|
|
DEFVAL { 0 }
|
|
::= { vdslLineAlarmConfProfileEntry 8 }
|
|
|
|
vdslLineAlarmConfInitFailure OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies if a vdslInitFailureNotification
|
|
notification will be generated if an initialization
|
|
failure occurs."
|
|
DEFVAL { false }
|
|
::= { vdslLineAlarmConfProfileEntry 9 }
|
|
|
|
vdslLineAlarmConfProfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create a new row or modify or
|
|
delete an existing row in this table.
|
|
|
|
A profile activated by setting this object to 'active'.
|
|
When 'active' is set, the system will validate the profile.
|
|
|
|
Before a profile can be deleted or taken out of service,
|
|
(by setting this object to 'destroy' or 'outOfService') it
|
|
must be first unreferenced from all associated lines.
|
|
|
|
An 'active' profile may be modified at any time."
|
|
::= { vdslLineAlarmConfProfileEntry 10 }
|
|
|
|
|
|
-- Notification definitions
|
|
|
|
vdslNotifications OBJECT IDENTIFIER ::= { vdslLineMib 0 }
|
|
|
|
vdslPerfLofsThreshNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
vdslPerfDataCurr15MinLofs
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of Framing 15-minute interval threshold
|
|
(vdslLineAlarmConfThresh15MinLofs) reached."
|
|
::= { vdslNotifications 1 }
|
|
|
|
vdslPerfLossThreshNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
vdslPerfDataCurr15MinLoss
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of Signal 15-minute interval threshold
|
|
(vdslLineAlarmConfThresh15MinLoss) reached."
|
|
::= { vdslNotifications 2 }
|
|
|
|
vdslPerfLprsThreshNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
vdslPerfDataCurr15MinLprs
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of Power 15-minute interval threshold
|
|
(vdslLineAlarmConfThresh15MinLprs) reached."
|
|
::= { vdslNotifications 3 }
|
|
|
|
vdslPerfLolsThreshNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
vdslPerfDataCurr15MinLols
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of Link 15-minute interval threshold
|
|
(vdslLineAlarmConfThresh15MinLols) reached."
|
|
::= { vdslNotifications 4 }
|
|
|
|
vdslPerfESsThreshNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
vdslPerfDataCurr15MinESs
|
|
}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Errored Seconds 15-minute interval threshold
|
|
(vdslLineAlarmConfThresh15MinESs) reached."
|
|
::= { vdslNotifications 5 }
|
|
|
|
vdslPerfSESsThreshNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
vdslPerfDataCurr15MinSESs
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Severely Errored Seconds 15-minute interval threshold
|
|
(vdslLineAlarmConfThresh15MinSESs) reached."
|
|
::= { vdslNotifications 6 }
|
|
|
|
vdslPerfUASsThreshNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
vdslPerfDataCurr15MinUASs
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unavailable Seconds 15-minute interval threshold
|
|
(vdslLineAlarmConfThresh15MinUASs) reached."
|
|
::= { vdslNotifications 7 }
|
|
|
|
vdslDownMaxSnrMgnNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
vdslPhysCurrSnrMgn
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The downstream Signal to Noise Margin exceeded
|
|
vdslLineConfDownMaxSnrMgn. The object
|
|
vdslPhysCurrSnrMgn will contain the Signal to Noise
|
|
margin as measured by the VTU-R."
|
|
::= { vdslNotifications 8 }
|
|
|
|
vdslDownMinSnrMgnNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
vdslPhysCurrSnrMgn
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The downstream Signal to Noise Margin fell below
|
|
vdslLineConfDownMinSnrMgn. The object vdslPhysCurrSnrMgn
|
|
will contain the Signal to Noise margin as measured by
|
|
the VTU-R."
|
|
|
|
::= { vdslNotifications 9 }
|
|
|
|
vdslUpMaxSnrMgnNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
vdslPhysCurrSnrMgn
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upstream Signal to Noise Margin exceeded
|
|
vdslLineConfUpMaxSnrMgn. The object vdslPhysCurrSnrMgn
|
|
will contain the Signal to Noise margin as measured
|
|
by the VTU-C."
|
|
::= { vdslNotifications 10 }
|
|
|
|
vdslUpMinSnrMgnNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
vdslPhysCurrSnrMgn
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upstream Signal to Noise Margin fell below
|
|
vdslLineConfUpMinSnrMgn. The object vdslPhysCurrSnrMgn
|
|
will contain the Signal to Noise margin as measured
|
|
by the VTU-C."
|
|
::= { vdslNotifications 11 }
|
|
|
|
vdslInitFailureNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
vdslPhysCurrStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vtu initialization failed. See vdslPhysCurrStatus for
|
|
potential reasons."
|
|
::= { vdslNotifications 12 }
|
|
|
|
-- conformance information
|
|
|
|
vdslConformance OBJECT IDENTIFIER ::= { vdslLineMib 3 }
|
|
vdslGroups OBJECT IDENTIFIER ::= { vdslConformance 1 }
|
|
vdslCompliances OBJECT IDENTIFIER ::= { vdslConformance 2 }
|
|
|
|
vdslLineMibCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities which
|
|
manage VDSL interfaces."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS
|
|
{
|
|
vdslGroup,
|
|
vdslNotificationGroup
|
|
}
|
|
::= { vdslCompliances 1 }
|
|
|
|
-- units of conformance
|
|
|
|
vdslGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
vdslLineCoding,
|
|
vdslLineType,
|
|
vdslLineConfProfile,
|
|
vdslLineAlarmConfProfile,
|
|
vdslPhysInvSerialNumber,
|
|
vdslPhysInvVendorID,
|
|
vdslPhysInvVersionNumber,
|
|
vdslPhysCurrSnrMgn,
|
|
vdslPhysCurrAtn,
|
|
vdslPhysCurrStatus,
|
|
vdslPhysCurrOutputPwr,
|
|
vdslPhysCurrAttainableRate,
|
|
vdslPhysCurrLineRate,
|
|
vdslChanInterleaveDelay,
|
|
vdslChanCrcBlockLength,
|
|
vdslChanCurrTxRate,
|
|
vdslChanCurrTxSlowBurstProtect,
|
|
vdslChanCurrTxFastFec,
|
|
vdslPerfDataValidIntervals,
|
|
vdslPerfDataInvalidIntervals,
|
|
vdslPerfDataLofs,
|
|
vdslPerfDataLoss,
|
|
vdslPerfDataLprs,
|
|
vdslPerfDataLols,
|
|
vdslPerfDataESs,
|
|
vdslPerfDataSESs,
|
|
vdslPerfDataUASs,
|
|
vdslPerfDataInits,
|
|
vdslPerfDataCurr15MinTimeElapsed,
|
|
vdslPerfDataCurr15MinLofs,
|
|
vdslPerfDataCurr15MinLoss,
|
|
vdslPerfDataCurr15MinLprs,
|
|
vdslPerfDataCurr15MinLols,
|
|
vdslPerfDataCurr15MinESs,
|
|
vdslPerfDataCurr15MinSESs,
|
|
vdslPerfDataCurr15MinUASs,
|
|
vdslPerfDataCurr15MinInits,
|
|
vdslPerfData1DayValidIntervals,
|
|
vdslPerfData1DayInvalidIntervals,
|
|
vdslPerfDataCurr1DayTimeElapsed,
|
|
vdslPerfDataCurr1DayLofs,
|
|
vdslPerfDataCurr1DayLoss,
|
|
vdslPerfDataCurr1DayLprs,
|
|
vdslPerfDataCurr1DayLols,
|
|
vdslPerfDataCurr1DayESs,
|
|
vdslPerfDataCurr1DaySESs,
|
|
vdslPerfDataCurr1DayUASs,
|
|
vdslPerfDataCurr1DayInits,
|
|
vdslPerfIntervalLofs,
|
|
vdslPerfIntervalLoss,
|
|
vdslPerfIntervalLprs,
|
|
vdslPerfIntervalLols,
|
|
vdslPerfIntervalESs,
|
|
vdslPerfIntervalSESs,
|
|
vdslPerfIntervalUASs,
|
|
vdslPerfIntervalInits,
|
|
vdslPerf1DayIntervalMoniSecs,
|
|
vdslPerf1DayIntervalLofs,
|
|
vdslPerf1DayIntervalLoss,
|
|
vdslPerf1DayIntervalLprs,
|
|
vdslPerf1DayIntervalLols,
|
|
vdslPerf1DayIntervalESs,
|
|
vdslPerf1DayIntervalSESs,
|
|
vdslPerf1DayIntervalUASs,
|
|
vdslPerf1DayIntervalInits,
|
|
vdslChanValidIntervals,
|
|
vdslChanInvalidIntervals,
|
|
vdslChanFixedOctets,
|
|
vdslChanBadBlks,
|
|
vdslChanCurr15MinTimeElapsed,
|
|
vdslChanCurr15MinFixedOctets,
|
|
vdslChanCurr15MinBadBlks,
|
|
vdslChan1DayValidIntervals,
|
|
vdslChan1DayInvalidIntervals,
|
|
vdslChanCurr1DayTimeElapsed,
|
|
vdslChanCurr1DayFixedOctets,
|
|
vdslChanCurr1DayBadBlks,
|
|
vdslChanIntervalFixedOctets,
|
|
vdslChanIntervalBadBlks,
|
|
vdslChan1DayIntervalMoniSecs,
|
|
vdslChan1DayIntervalFixedOctets,
|
|
vdslChan1DayIntervalBadBlks,
|
|
vdslLineConfDownRateMode,
|
|
vdslLineConfUpRateMode,
|
|
vdslLineConfDownMaxPwr,
|
|
vdslLineConfUpMaxPwr,
|
|
vdslLineConfDownMaxSnrMgn,
|
|
vdslLineConfDownMinSnrMgn,
|
|
vdslLineConfDownTargetSnrMgn,
|
|
vdslLineConfUpMaxSnrMgn,
|
|
vdslLineConfUpMinSnrMgn,
|
|
vdslLineConfUpTargetSnrMgn,
|
|
vdslLineConfDownFastMaxDataRate,
|
|
vdslLineConfDownFastMinDataRate,
|
|
vdslLineConfDownSlowMaxDataRate,
|
|
vdslLineConfDownSlowMinDataRate,
|
|
vdslLineConfUpFastMaxDataRate,
|
|
vdslLineConfUpFastMinDataRate,
|
|
vdslLineConfUpSlowMaxDataRate,
|
|
vdslLineConfUpSlowMinDataRate,
|
|
vdslLineConfDownRateRatio,
|
|
vdslLineConfUpRateRatio,
|
|
vdslLineConfDownMaxInterDelay,
|
|
vdslLineConfUpMaxInterDelay,
|
|
vdslLineConfDownPboControl,
|
|
vdslLineConfUpPboControl,
|
|
vdslLineConfDownPboLevel,
|
|
vdslLineConfUpPboLevel,
|
|
vdslLineConfDeploymentScenario,
|
|
vdslLineConfAdslPresence,
|
|
vdslLineConfApplicableStandard,
|
|
vdslLineConfBandPlan,
|
|
vdslLineConfBandPlanFx,
|
|
vdslLineConfBandOptUsage,
|
|
vdslLineConfUpPsdTemplate,
|
|
vdslLineConfDownPsdTemplate,
|
|
vdslLineConfHamBandMask,
|
|
vdslLineConfCustomNotch1Start,
|
|
vdslLineConfCustomNotch1Stop,
|
|
vdslLineConfCustomNotch2Start,
|
|
vdslLineConfCustomNotch2Stop,
|
|
vdslLineConfDownTargetSlowBurst,
|
|
vdslLineConfUpTargetSlowBurst,
|
|
vdslLineConfDownMaxFastFec,
|
|
vdslLineConfUpMaxFastFec,
|
|
vdslLineConfLineType,
|
|
vdslLineConfProfRowStatus,
|
|
vdslLineAlarmConfThresh15MinLofs,
|
|
vdslLineAlarmConfThresh15MinLoss,
|
|
vdslLineAlarmConfThresh15MinLprs,
|
|
vdslLineAlarmConfThresh15MinLols,
|
|
vdslLineAlarmConfThresh15MinESs,
|
|
vdslLineAlarmConfThresh15MinSESs,
|
|
vdslLineAlarmConfThresh15MinUASs,
|
|
vdslLineAlarmConfInitFailure,
|
|
vdslLineAlarmConfProfRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information about
|
|
a VDSL Line."
|
|
::= { vdslGroups 1 }
|
|
|
|
vdslNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS
|
|
{
|
|
vdslPerfLofsThreshNotification,
|
|
vdslPerfLossThreshNotification,
|
|
vdslPerfLprsThreshNotification,
|
|
vdslPerfLolsThreshNotification,
|
|
vdslPerfESsThreshNotification,
|
|
vdslPerfSESsThreshNotification,
|
|
vdslPerfUASsThreshNotification,
|
|
vdslDownMaxSnrMgnNotification,
|
|
vdslDownMinSnrMgnNotification,
|
|
vdslUpMaxSnrMgnNotification,
|
|
vdslUpMinSnrMgnNotification,
|
|
vdslInitFailureNotification
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group supports notifications of significant
|
|
conditions associated with VDSL Lines."
|
|
::= { vdslGroups 2 }
|
|
|
|
END
|