793 lines
26 KiB
Plaintext
793 lines
26 KiB
Plaintext
VRRP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
NOTIFICATION-TYPE, Counter32,
|
|
Integer32, IpAddress, mib-2 FROM SNMPv2-SMI
|
|
|
|
TEXTUAL-CONVENTION, RowStatus,
|
|
MacAddress, TruthValue, TimeStamp FROM SNMPv2-TC
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP,
|
|
NOTIFICATION-GROUP FROM SNMPv2-CONF
|
|
ifIndex FROM IF-MIB;
|
|
|
|
|
|
vrrpMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200003030000Z"
|
|
ORGANIZATION "IETF VRRP Working Group"
|
|
CONTACT-INFO
|
|
"Brian R. Jewell
|
|
Postal: Copper Mountain Networks, Inc.
|
|
2470 Embarcadero Way
|
|
Palo Alto, California 94303
|
|
Tel: +1 650 687 3367
|
|
E-Mail: bjewell@coppermountain.com"
|
|
|
|
DESCRIPTION
|
|
"This MIB describes objects used for managing Virtual Router
|
|
Redundancy Protocol (VRRP) routers."
|
|
REVISION "200003030000Z" -- 03 Mar 2000
|
|
DESCRIPTION "Initial version as published in RFC 2787."
|
|
::= { mib-2 68 }
|
|
|
|
-- *******************************************************************
|
|
-- Textual Conventions
|
|
-- *******************************************************************
|
|
|
|
VrId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A number which, along with an interface index (ifIndex),
|
|
serves to uniquely identify a virtual router on a given VRRP
|
|
router. A set of one or more associated addresses is assigned
|
|
to a VRID."
|
|
SYNTAX Integer32 (1..255)
|
|
|
|
-- *******************************************************************
|
|
-- VRRP MIB Groups
|
|
-- *******************************************************************
|
|
|
|
vrrpOperations OBJECT IDENTIFIER ::= { vrrpMIB 1 }
|
|
vrrpStatistics OBJECT IDENTIFIER ::= { vrrpMIB 2 }
|
|
vrrpConformance OBJECT IDENTIFIER ::= { vrrpMIB 3 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- Start of MIB objects
|
|
-- *******************************************************************
|
|
|
|
vrrpNodeVersion OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value identifies the particular version of the VRRP
|
|
supported by this node."
|
|
::= { vrrpOperations 1 }
|
|
|
|
vrrpNotificationCntl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled (1),
|
|
disabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the VRRP-enabled router will generate
|
|
SNMP traps for events defined in this MIB. 'Enabled'
|
|
results in SNMP traps; 'disabled', no traps are sent."
|
|
DEFVAL { enabled }
|
|
::= { vrrpOperations 2 }
|
|
|
|
-- *******************************************************************
|
|
-- VRRP Operations Table
|
|
-- *******************************************************************
|
|
|
|
vrrpOperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VrrpOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operations table for a VRRP router which consists of a
|
|
sequence (i.e., one or more conceptual rows) of
|
|
'vrrpOperEntry' items."
|
|
::= { vrrpOperations 3 }
|
|
|
|
vrrpOperEntry OBJECT-TYPE
|
|
SYNTAX VrrpOperEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the vrrpOperTable containing the operational
|
|
characteristics of a virtual router. On a VRRP router,
|
|
a given virtual router is identified by a combination
|
|
of the IF index and VRID.
|
|
|
|
Rows in the table cannot be modified unless the value
|
|
of `vrrpOperAdminState' is `disabled' and the
|
|
`vrrpOperState' has transitioned to `initialize'."
|
|
|
|
INDEX { ifIndex, vrrpOperVrId }
|
|
::= { vrrpOperTable 1 }
|
|
|
|
VrrpOperEntry ::=
|
|
SEQUENCE {
|
|
vrrpOperVrId
|
|
VrId,
|
|
vrrpOperVirtualMacAddr
|
|
MacAddress,
|
|
vrrpOperState
|
|
INTEGER,
|
|
vrrpOperAdminState
|
|
INTEGER,
|
|
vrrpOperPriority
|
|
Integer32,
|
|
vrrpOperIpAddrCount
|
|
Integer32,
|
|
vrrpOperMasterIpAddr
|
|
IpAddress,
|
|
vrrpOperPrimaryIpAddr
|
|
IpAddress,
|
|
vrrpOperAuthType
|
|
INTEGER,
|
|
vrrpOperAuthKey
|
|
OCTET STRING,
|
|
vrrpOperAdvertisementInterval
|
|
Integer32,
|
|
vrrpOperPreemptMode
|
|
TruthValue,
|
|
vrrpOperVirtualRouterUpTime
|
|
TimeStamp,
|
|
vrrpOperProtocol
|
|
INTEGER,
|
|
vrrpOperRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
vrrpOperVrId OBJECT-TYPE
|
|
SYNTAX VrId
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the Virtual Router Identifier (VRID)."
|
|
::= { vrrpOperEntry 1 }
|
|
|
|
vrrpOperVirtualMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The virtual MAC address of the virtual router. Although this
|
|
object can be derived from the 'vrrpOperVrId' object, it is
|
|
defined so that it is easily obtainable by a management
|
|
application and can be included in VRRP-related SNMP traps."
|
|
::= { vrrpOperEntry 2 }
|
|
|
|
vrrpOperState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
initialize(1),
|
|
backup(2),
|
|
master(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
|
|
DESCRIPTION
|
|
"The current state of the virtual router. This object has
|
|
three defined values:
|
|
|
|
- `initialize', which indicates that all the
|
|
virtual router is waiting for a startup event.
|
|
|
|
- `backup', which indicates the virtual router is
|
|
monitoring the availability of the master router.
|
|
|
|
- `master', which indicates that the virtual router
|
|
is forwarding packets for IP addresses that are
|
|
associated with this router.
|
|
|
|
Setting the `vrrpOperAdminState' object (below) initiates
|
|
transitions in the value of this object."
|
|
::= { vrrpOperEntry 3 }
|
|
|
|
vrrpOperAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object will enable/disable the virtual router
|
|
function. Setting the value to `up', will transition
|
|
the state of the virtual router from `initialize' to `backup'
|
|
or `master', depending on the value of `vrrpOperPriority'.
|
|
Setting the value to `down', will transition the
|
|
router from `master' or `backup' to `initialize'. State
|
|
transitions may not be immediate; they sometimes depend on
|
|
other factors, such as the interface (IF) state.
|
|
|
|
The `vrrpOperAdminState' object must be set to `down' prior
|
|
to modifying the other read-create objects in the conceptual
|
|
row. The value of the `vrrpOperRowStatus' object (below)
|
|
must be `active', signifying that the conceptual row
|
|
is valid (i.e., the objects are correctly set),
|
|
in order for this object to be set to `up'."
|
|
DEFVAL { down }
|
|
::= { vrrpOperEntry 4 }
|
|
|
|
vrrpOperPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the priority to be used for the
|
|
virtual router master election process. Higher values imply
|
|
higher priority.
|
|
|
|
A priority of '0', although not settable, is sent by
|
|
the master router to indicate that this router has ceased
|
|
to participate in VRRP and a backup virtual router should
|
|
transition to become a new master.
|
|
|
|
A priority of 255 is used for the router that owns the
|
|
associated IP address(es)."
|
|
DEFVAL { 100 }
|
|
::= { vrrpOperEntry 5 }
|
|
|
|
vrrpOperIpAddrCount OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IP addresses that are associated with this
|
|
virtual router. This number is equal to the number of rows
|
|
in the vrrpAssoIpAddrTable that correspond to a given IF
|
|
index/VRID pair."
|
|
::= { vrrpOperEntry 6 }
|
|
|
|
vrrpOperMasterIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The master router's real (primary) IP address. This is
|
|
the IP address listed as the source in VRRP advertisement
|
|
last received by this virtual router."
|
|
::= { vrrpOperEntry 7 }
|
|
|
|
vrrpOperPrimaryIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"In the case where there is more than one IP address for
|
|
a given `ifIndex', this object is used to specify the IP
|
|
address that will become the `vrrpOperMasterIpAddr', should
|
|
the virtual router transition from backup to master. If
|
|
this object is set to 0.0.0.0, the IP address which is
|
|
numerically lowest will be selected."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { vrrpOperEntry 8 }
|
|
|
|
vrrpOperAuthType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAuthentication(1), -- VRRP protocol exchanges are not
|
|
-- authenticated.
|
|
simpleTextPassword(2), -- Exchanges are authenticated by a
|
|
-- clear text password.
|
|
ipAuthenticationHeader(3) -- Exchanges are authenticated using
|
|
-- the IP authentication header.
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication type used for VRRP protocol exchanges between
|
|
virtual routers. This value of this object is the same for a
|
|
given ifIndex.
|
|
|
|
New enumerations to this list can only be added via a new
|
|
RFC on the standards track."
|
|
DEFVAL { noAuthentication }
|
|
::= { vrrpOperEntry 9 }
|
|
|
|
vrrpOperAuthKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Authentication Key. This object is set according to
|
|
the value of the 'vrrpOperAuthType' object
|
|
('simpleTextPassword' or 'ipAuthenticationHeader'). If the
|
|
length of the value is less than 16 octets, the agent will
|
|
left adjust and zero fill to 16 octets. The value of this
|
|
object is the same for a given ifIndex.
|
|
|
|
When read, vrrpOperAuthKey always returns an Octet String
|
|
of length zero."
|
|
::= { vrrpOperEntry 10 }
|
|
|
|
vrrpOperAdvertisementInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time interval, in seconds, between sending
|
|
advertisement messages. Only the master router sends
|
|
VRRP advertisements."
|
|
DEFVAL { 1 }
|
|
::= { vrrpOperEntry 11 }
|
|
|
|
vrrpOperPreemptMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Controls whether a higher priority virtual router will
|
|
preempt a lower priority master."
|
|
DEFVAL { true }
|
|
::= { vrrpOperEntry 12 }
|
|
|
|
vrrpOperVirtualRouterUpTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the value of the `sysUpTime' object when this
|
|
virtual router (i.e., the `vrrpOperState') transitioned
|
|
out of `initialized'."
|
|
::= { vrrpOperEntry 13 }
|
|
|
|
vrrpOperProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ip (1),
|
|
bridge (2),
|
|
decnet (3),
|
|
other (4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The particular protocol being controlled by this Virtual
|
|
Router.
|
|
|
|
New enumerations to this list can only be added via a new
|
|
RFC on the standards track."
|
|
DEFVAL { ip }
|
|
::= { vrrpOperEntry 14 }
|
|
|
|
vrrpOperRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status variable, used in accordance to installation
|
|
and removal conventions for conceptual rows. The rowstatus of
|
|
a currently active row in the vrrpOperTable is constrained
|
|
by the operational state of the corresponding virtual router.
|
|
When `vrrpOperRowStatus' is set to active(1), no other
|
|
objects in the conceptual row, with the exception of
|
|
`vrrpOperAdminState', can be modified. Prior to setting the
|
|
`vrrpOperRowStatus' object from `active' to a different value,
|
|
the `vrrpOperAdminState' object must be set to `down' and the
|
|
`vrrpOperState' object be transitioned to `initialize'.
|
|
|
|
To create a row in this table, a manager sets this object
|
|
to either createAndGo(4) or createAndWait(5). Until instances
|
|
of all corresponding columns are appropriately configured,
|
|
the value of the corresponding instance of the `vrrpOperRowStatus'
|
|
column will be read as notReady(3).
|
|
In particular, a newly created row cannot be made active(1)
|
|
until (minimally) the corresponding instance of
|
|
`vrrpOperVrId' has been set and there is at least one active
|
|
row in the `vrrpAssoIpAddrTable' defining an associated
|
|
IP address for the virtual router."
|
|
::= { vrrpOperEntry 15 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- VRRP Associated IP Address Table
|
|
-- *******************************************************************
|
|
|
|
vrrpAssoIpAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VrrpAssoIpAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of addresses associated with this virtual router."
|
|
::= { vrrpOperations 4 }
|
|
|
|
vrrpAssoIpAddrEntry OBJECT-TYPE
|
|
SYNTAX VrrpAssoIpAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the table contains an IP address that is
|
|
associated with a virtual router. The number of rows for
|
|
a given ifIndex and VrId will equal the number of IP
|
|
addresses associated (e.g., backed up) by the virtual
|
|
router (equivalent to 'vrrpOperIpAddrCount').
|
|
|
|
Rows in the table cannot be modified unless the value
|
|
of `vrrpOperAdminState' is `disabled' and the
|
|
`vrrpOperState' has transitioned to `initialize'."
|
|
|
|
INDEX { ifIndex, vrrpOperVrId, vrrpAssoIpAddr }
|
|
::= { vrrpAssoIpAddrTable 1 }
|
|
|
|
VrrpAssoIpAddrEntry ::=
|
|
SEQUENCE {
|
|
vrrpAssoIpAddr
|
|
IpAddress,
|
|
vrrpAssoIpAddrRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
vrrpAssoIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The assigned IP addresses that a virtual router is
|
|
responsible for backing up."
|
|
::= { vrrpAssoIpAddrEntry 1 }
|
|
|
|
vrrpAssoIpAddrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status variable, used according to installation
|
|
and removal conventions for conceptual rows. Setting this
|
|
object to active(1) or createAndGo(4) results in the
|
|
addition of an associated address for a virtual router.
|
|
Destroying the entry or setting it to notInService(2)
|
|
removes the associated address from the virtual router.
|
|
The use of other values is implementation-dependent."
|
|
::= { vrrpAssoIpAddrEntry 2 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- VRRP Router Statistics
|
|
-- *******************************************************************
|
|
|
|
vrrpRouterChecksumErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP packets received with an invalid
|
|
VRRP checksum value."
|
|
::= { vrrpStatistics 1 }
|
|
|
|
vrrpRouterVersionErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP packets received with an unknown
|
|
or unsupported version number."
|
|
::= { vrrpStatistics 2 }
|
|
|
|
vrrpRouterVrIdErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP packets received with an invalid
|
|
VRID for this virtual router."
|
|
::= { vrrpStatistics 3 }
|
|
|
|
-- *******************************************************************
|
|
-- VRRP Router Statistics Table
|
|
-- *******************************************************************
|
|
|
|
vrrpRouterStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VrrpRouterStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of virtual router statistics."
|
|
::= { vrrpStatistics 4 }
|
|
|
|
vrrpRouterStatsEntry OBJECT-TYPE
|
|
SYNTAX VrrpRouterStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the table, containing statistics information
|
|
about a given virtual router."
|
|
AUGMENTS { vrrpOperEntry }
|
|
::= { vrrpRouterStatsTable 1 }
|
|
|
|
VrrpRouterStatsEntry ::=
|
|
SEQUENCE {
|
|
vrrpStatsBecomeMaster
|
|
Counter32,
|
|
vrrpStatsAdvertiseRcvd
|
|
Counter32,
|
|
vrrpStatsAdvertiseIntervalErrors
|
|
Counter32,
|
|
vrrpStatsAuthFailures
|
|
Counter32,
|
|
vrrpStatsIpTtlErrors
|
|
Counter32,
|
|
vrrpStatsPriorityZeroPktsRcvd
|
|
Counter32,
|
|
vrrpStatsPriorityZeroPktsSent
|
|
Counter32,
|
|
vrrpStatsInvalidTypePktsRcvd
|
|
Counter32,
|
|
vrrpStatsAddressListErrors
|
|
Counter32,
|
|
vrrpStatsInvalidAuthType
|
|
Counter32,
|
|
vrrpStatsAuthTypeMismatch
|
|
Counter32,
|
|
vrrpStatsPacketLengthErrors
|
|
Counter32
|
|
}
|
|
|
|
vrrpStatsBecomeMaster OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of times that this virtual router's state
|
|
has transitioned to MASTER."
|
|
::= { vrrpRouterStatsEntry 1 }
|
|
|
|
vrrpStatsAdvertiseRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP advertisements received by this
|
|
virtual router."
|
|
::= { vrrpRouterStatsEntry 2 }
|
|
|
|
vrrpStatsAdvertiseIntervalErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP advertisement packets received
|
|
for which the advertisement interval is different than the
|
|
one configured for the local virtual router."
|
|
::= { vrrpRouterStatsEntry 3 }
|
|
|
|
vrrpStatsAuthFailures OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP packets received that do not pass
|
|
the authentication check."
|
|
::= { vrrpRouterStatsEntry 4 }
|
|
|
|
vrrpStatsIpTtlErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP packets received by the virtual
|
|
router with IP TTL (Time-To-Live) not equal to 255."
|
|
::= { vrrpRouterStatsEntry 5 }
|
|
|
|
vrrpStatsPriorityZeroPktsRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP packets received by the virtual
|
|
router with a priority of '0'."
|
|
::= { vrrpRouterStatsEntry 6 }
|
|
|
|
vrrpStatsPriorityZeroPktsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of VRRP packets sent by the virtual router
|
|
with a priority of '0'."
|
|
::= { vrrpRouterStatsEntry 7 }
|
|
|
|
vrrpStatsInvalidTypePktsRcvd OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of VRRP packets received by the virtual router
|
|
with an invalid value in the 'type' field."
|
|
::= { vrrpRouterStatsEntry 8 }
|
|
|
|
vrrpStatsAddressListErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received for which the address
|
|
list does not match the locally configured list for the
|
|
virtual router."
|
|
::= { vrrpRouterStatsEntry 9 }
|
|
|
|
vrrpStatsInvalidAuthType OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received with an unknown
|
|
authentication type."
|
|
::= { vrrpRouterStatsEntry 10 }
|
|
|
|
vrrpStatsAuthTypeMismatch OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received with 'Auth Type' not
|
|
equal to the locally configured authentication method
|
|
(`vrrpOperAuthType')."
|
|
::= { vrrpRouterStatsEntry 11 }
|
|
|
|
vrrpStatsPacketLengthErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets received with a packet length
|
|
less than the length of the VRRP header."
|
|
::= { vrrpRouterStatsEntry 12 }
|
|
|
|
-- *******************************************************************
|
|
-- Trap Definitions
|
|
-- *******************************************************************
|
|
|
|
vrrpNotifications OBJECT IDENTIFIER ::= { vrrpMIB 0 }
|
|
|
|
vrrpTrapPacketSrc OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of an inbound VRRP packet. Used by
|
|
vrrpTrapAuthFailure trap."
|
|
::= { vrrpOperations 5 }
|
|
|
|
vrrpTrapAuthErrorType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
invalidAuthType (1),
|
|
authTypeMismatch (2),
|
|
authFailure (3)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Potential types of configuration conflicts.
|
|
Used by vrrpAuthFailure trap."
|
|
::= { vrrpOperations 6 }
|
|
|
|
vrrpTrapNewMaster NOTIFICATION-TYPE
|
|
OBJECTS { vrrpOperMasterIpAddr
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The newMaster trap indicates that the sending agent
|
|
has transitioned to 'Master' state."
|
|
::= { vrrpNotifications 1 }
|
|
|
|
vrrpTrapAuthFailure NOTIFICATION-TYPE
|
|
OBJECTS { vrrpTrapPacketSrc,
|
|
vrrpTrapAuthErrorType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A vrrpAuthFailure trap signifies that a packet has
|
|
been received from a router whose authentication key
|
|
or authentication type conflicts with this router's
|
|
authentication key or authentication type. Implementation
|
|
of this trap is optional."
|
|
::= { vrrpNotifications 2 }
|
|
|
|
|
|
-- *******************************************************************
|
|
-- Conformance Information
|
|
-- *******************************************************************
|
|
|
|
vrrpMIBCompliances OBJECT IDENTIFIER ::= { vrrpConformance 1 }
|
|
vrrpMIBGroups OBJECT IDENTIFIER ::= { vrrpConformance 2 }
|
|
|
|
-- ...................................................................
|
|
-- Compliance Statements
|
|
-- ...................................................................
|
|
|
|
vrrpMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The core compliance statement for all VRRP implementations."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
vrrpOperGroup,
|
|
vrrpStatsGroup
|
|
}
|
|
OBJECT vrrpOperPriority
|
|
WRITE-SYNTAX Integer32 (1..255)
|
|
DESCRIPTION "SETable values are from 1 to 255."
|
|
::= { vrrpMIBCompliances 1 }
|
|
|
|
-- ...................................................................
|
|
-- Conformance Groups
|
|
-- ...................................................................
|
|
|
|
vrrpOperGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
vrrpNodeVersion,
|
|
vrrpNotificationCntl,
|
|
vrrpOperVirtualMacAddr,
|
|
vrrpOperState,
|
|
vrrpOperAdminState,
|
|
vrrpOperPriority,
|
|
vrrpOperIpAddrCount,
|
|
vrrpOperMasterIpAddr,
|
|
vrrpOperPrimaryIpAddr,
|
|
vrrpOperAuthType,
|
|
vrrpOperAuthKey,
|
|
vrrpOperAdvertisementInterval,
|
|
vrrpOperPreemptMode,
|
|
vrrpOperVirtualRouterUpTime,
|
|
vrrpOperProtocol,
|
|
vrrpOperRowStatus,
|
|
vrrpAssoIpAddrRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conformance group for VRRP operations."
|
|
::= { vrrpMIBGroups 1 }
|
|
|
|
vrrpStatsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
vrrpRouterChecksumErrors,
|
|
vrrpRouterVersionErrors,
|
|
vrrpRouterVrIdErrors,
|
|
vrrpStatsBecomeMaster,
|
|
vrrpStatsAdvertiseRcvd,
|
|
vrrpStatsAdvertiseIntervalErrors,
|
|
vrrpStatsAuthFailures,
|
|
vrrpStatsIpTtlErrors,
|
|
vrrpStatsPriorityZeroPktsRcvd,
|
|
vrrpStatsPriorityZeroPktsSent,
|
|
vrrpStatsInvalidTypePktsRcvd,
|
|
vrrpStatsAddressListErrors,
|
|
vrrpStatsInvalidAuthType,
|
|
vrrpStatsAuthTypeMismatch,
|
|
vrrpStatsPacketLengthErrors
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conformance group for VRRP statistics."
|
|
::= { vrrpMIBGroups 2 }
|
|
|
|
vrrpTrapGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
vrrpTrapPacketSrc,
|
|
vrrpTrapAuthErrorType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Conformance group for objects contained in VRRP notifications."
|
|
::= { vrrpMIBGroups 3 }
|
|
|
|
vrrpNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
vrrpTrapNewMaster,
|
|
vrrpTrapAuthFailure
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VRRP MIB Notification Group."
|
|
::= { vrrpMIBGroups 4 }
|
|
|
|
END
|