1183 lines
39 KiB
Plaintext
1183 lines
39 KiB
Plaintext
--
|
|
-- Accedian Enterprise Specific MIB
|
|
--
|
|
-- Copyright (c) 2005-2010, Accedian Networks, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- The contents of this document is subject to change without notice.
|
|
--
|
|
|
|
|
|
ACD-SFP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Integer32, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
DisplayString, TruthValue
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
acdMibs
|
|
FROM ACCEDIAN-SMI;
|
|
|
|
acdSfp MODULE-IDENTITY
|
|
|
|
LAST-UPDATED "201011100100Z"
|
|
ORGANIZATION "Accedian Networks, Inc."
|
|
CONTACT-INFO
|
|
"Accedian Technical Assistance Center
|
|
Accedian Networks, Inc.
|
|
4878 Levy, suite 202
|
|
Saint-Laurent, Quebec Canada H4R 2P1
|
|
E-mail: support@accedian.com"
|
|
DESCRIPTION
|
|
"The SFPs database for this Accedian Networks device."
|
|
|
|
REVISION "201011100100Z" -- 10 November 2010
|
|
DESCRIPTION
|
|
"Add compliance section."
|
|
|
|
REVISION "200804220100Z" -- 22 April 2008
|
|
DESCRIPTION
|
|
"Add acdSfpInfoIdType, acdSfpInfoExtIdType and acdSfpInfoTransCode support."
|
|
|
|
REVISION "200608060100Z" -- 6 Aug 2006
|
|
DESCRIPTION
|
|
"Initial version of MIB module ACD-SFP-MIB."
|
|
|
|
::= { acdMibs 4 }
|
|
|
|
acdSfpNotifications OBJECT IDENTIFIER ::= { acdSfp 5 }
|
|
acdSfpMIBObjects OBJECT IDENTIFIER ::= { acdSfp 6 }
|
|
acdSfpConformance OBJECT IDENTIFIER ::= { acdSfp 7 }
|
|
|
|
-----------------------------------------------------------------------
|
|
-- The information SFP table
|
|
-- This table contains all SFP Info.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdSfpInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdSfpInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of all SFP info"
|
|
::= { acdSfp 1 }
|
|
|
|
acdSfpInfoEntry OBJECT-TYPE
|
|
SYNTAX AcdSfpInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a part of the content of the SFP's 0xA0 EEPROM"
|
|
INDEX { acdSfpInfoID }
|
|
::= { acdSfpInfoTable 1 }
|
|
|
|
|
|
AcdSfpInfoEntry ::= SEQUENCE {
|
|
acdSfpInfoID Unsigned32,
|
|
acdSfpInfoConnIdx Unsigned32,
|
|
acdSfpInfoConnType INTEGER,
|
|
acdSfpInfoVendor DisplayString,
|
|
acdSfpInfoVendorOui DisplayString,
|
|
acdSfpInfoVendorPn DisplayString,
|
|
acdSfpInfoVendorRev DisplayString,
|
|
acdSfpInfoWavelength Unsigned32,
|
|
acdSfpInfoSerialNum DisplayString,
|
|
acdSfpInfoYear Unsigned32,
|
|
acdSfpInfoMonth Unsigned32,
|
|
acdSfpInfoDay Unsigned32,
|
|
acdSfpInfoLot Unsigned32,
|
|
acdSfpInfoRev8472 INTEGER,
|
|
acdSfpInfoPresent TruthValue,
|
|
acdSfpInfoDiag TruthValue,
|
|
acdSfpInfoInternal TruthValue,
|
|
acdSfpInfoAlm TruthValue,
|
|
acdSfpInfoIdType Unsigned32,
|
|
acdSfpInfoExtIdType Unsigned32,
|
|
acdSfpInfoTransCode DisplayString
|
|
}
|
|
|
|
acdSfpInfoID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each SFP. Its value ranges from 1 to
|
|
MAXINT (4 bytes). "
|
|
::= { acdSfpInfoEntry 1 }
|
|
|
|
acdSfpInfoConnIdx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the connector index on the box. The index
|
|
is assigned form left to rigth starting with 1."
|
|
::= { acdSfpInfoEntry 2 }
|
|
|
|
acdSfpInfoConnType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sfpSC(1),
|
|
sfpFC1COPPER(2),
|
|
sfpFC2COPPER(3),
|
|
sfpBNC(4),
|
|
sfpFCCOAX(5),
|
|
sfpFIBERJACK(6),
|
|
sfpLC(7),
|
|
sfpMTRJ(8),
|
|
sfpMU(9),
|
|
sfpSG(10),
|
|
sfpPIGTAIL(11),
|
|
sfpHSSDCII(32),
|
|
sfpCOPPERPIGTAIL(33)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The connector value indicates the external optical or electrical
|
|
cable connector provided as the media interface."
|
|
::= { acdSfpInfoEntry 3 }
|
|
|
|
acdSfpInfoVendor OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor name is a 16 character field that contains ASCII
|
|
characters, left-aligned and padded on the right with ASCII
|
|
spaces (20h). The vendor name shall be the full name of the
|
|
corporation, a commonly accepted abbreviation of the name of
|
|
the corporation, the SCSI company code for the corporation,
|
|
or the stock exchange code for the corporation. At least one
|
|
of the vendor name or the vendor OUI fields shall contain
|
|
valid serial data."
|
|
::= { acdSfpInfoEntry 4 }
|
|
|
|
acdSfpInfoVendorOui OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (3))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor organizationally unique identifier field (vendor OUI)
|
|
is a 3-byte field that contains the IEEE Company Identifier for
|
|
the vendor. A value of all zero in the 3-byte field indicates
|
|
that the Vendor OUI is unspecified."
|
|
::= { acdSfpInfoEntry 5 }
|
|
|
|
acdSfpInfoVendorPn OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor part number (vendor PN) is a 16-byte field that
|
|
contains ASCII characters, leftaligned and padded on the
|
|
right with ASCII spaces (20h), defining the vendor's part
|
|
number or product name. A value of all zero in the 16-byte
|
|
field indicates that the vendor PN is unspecified."
|
|
::= { acdSfpInfoEntry 6 }
|
|
|
|
acdSfpInfoVendorRev OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor revision number (vendor rev) is a 4-byte field that
|
|
contains ASCII characters, leftaligned and padded on the right
|
|
with ASCII spaces (20h), defining the vendor's product revision
|
|
number. A value of all zero in the 4-byte field indicates that
|
|
the vendor PN is unspecified."
|
|
::= { acdSfpInfoEntry 7 }
|
|
|
|
acdSfpInfoWavelength OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Nominal transmitter output wavelength at room temperature. 16 bit
|
|
value with byte 60 as high order byte and byte 61 as low order
|
|
byte. The laser wavelength is equal to the 16 bit integer
|
|
value in nm. This field allows the user to read the laser
|
|
wavelength directly, so it is not necessary to infer it from the
|
|
transceiver Code for Electronic Compatibility."
|
|
::= { acdSfpInfoEntry 8 }
|
|
|
|
acdSfpInfoSerialNum OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor serial number (vendor SN) is a 16 character field that
|
|
contains ASCII characters, left-aligned and padded on the right
|
|
with ASCII spaces (20h), defining the vendor's serial number for
|
|
the transceiver. A value of all zero in the 16-byte field indicates
|
|
that the vendor PN is unspecified."
|
|
::= { acdSfpInfoEntry 9 }
|
|
|
|
acdSfpInfoYear OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the year of manufacturing."
|
|
::= { acdSfpInfoEntry 10 }
|
|
|
|
acdSfpInfoMonth OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the month of manufacturing."
|
|
::= { acdSfpInfoEntry 11 }
|
|
|
|
acdSfpInfoDay OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the day of manufacturing."
|
|
::= { acdSfpInfoEntry 12 }
|
|
|
|
acdSfpInfoLot OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the Lot number of manufacturing."
|
|
::= { acdSfpInfoEntry 13 }
|
|
|
|
|
|
acdSfpInfoRev8472 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undefined(0),
|
|
rev93(1),
|
|
rev94(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate to which revision this SFP is compatible."
|
|
::= { acdSfpInfoEntry 14 }
|
|
|
|
acdSfpInfoPresent OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the SFP is present or not."
|
|
::= { acdSfpInfoEntry 15 }
|
|
|
|
acdSfpInfoDiag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the SFP supports Digital Diagnostics."
|
|
::= { acdSfpInfoEntry 16 }
|
|
|
|
acdSfpInfoInternal OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the SFP supports internal calibration. If
|
|
externally calibrated, the measurements are raw A/D values and must
|
|
be converted to real world units using calibration constants
|
|
stored in EEPROM locations 56 to 95 at 2 wire serial bus address
|
|
A2h. Calibration is valid over vendor specified operating
|
|
temperature and voltage. Alarm and warning threshold values
|
|
should be interpreted in the same manner as real time 16 bit data."
|
|
::= { acdSfpInfoEntry 17 }
|
|
|
|
acdSfpInfoAlm OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the SFP supports Alarm and warning
|
|
thresholds for the Digital Diagnostics."
|
|
::= { acdSfpInfoEntry 18 }
|
|
|
|
acdSfpInfoIdType OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identifier value specifies the physical device described by
|
|
the two-wire interface information. This value shall be included
|
|
in the two-wire interface data (see SFF-8472 for details)."
|
|
::= { acdSfpInfoEntry 19 }
|
|
|
|
acdSfpInfoExtIdType OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The extended identifier value provides additional information
|
|
about the transceiver. The field should be set to 04h for all SFP
|
|
modules indicating two-wire interface ID module definition (see
|
|
SFF-8472 for details)."
|
|
::= { acdSfpInfoEntry 20 }
|
|
|
|
acdSfpInfoTransCode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The following bit significant indicators define the electronic
|
|
or optical interfaces that are supported by the transceiver. At
|
|
least one bit shall be set in this field (see SFF-8472 for details)."
|
|
::= { acdSfpInfoEntry 21 }
|
|
|
|
-----------------------------------------------------------------------
|
|
-- The Digital Diagnostics SFP table
|
|
-- This table contains all SFP Digital Diagnostics.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdSfpDiagTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdSfpDiagEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of all SFP Digital Diagnostics"
|
|
::= { acdSfp 2 }
|
|
|
|
acdSfpDiagEntry OBJECT-TYPE
|
|
SYNTAX AcdSfpDiagEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a part the content of the SFP's 0xA0 EEPROM"
|
|
INDEX { acdSfpDiagID }
|
|
::= { acdSfpDiagTable 1 }
|
|
|
|
|
|
AcdSfpDiagEntry ::= SEQUENCE {
|
|
acdSfpDiagID Unsigned32,
|
|
acdSfpDiagConnIdx Unsigned32,
|
|
acdSfpDiagTemp Integer32,
|
|
acdSfpDiagVcc Unsigned32,
|
|
acdSfpDiagLbc Unsigned32,
|
|
acdSfpDiagTxPwr Unsigned32,
|
|
acdSfpDiagRxPwr Unsigned32,
|
|
acdSfpDiagTxPwrdBm DisplayString,
|
|
acdSfpDiagRxPwrdBm DisplayString
|
|
}
|
|
|
|
acdSfpDiagID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each SFP. Its value ranges from 1 to
|
|
MAXINT (4 bytes). "
|
|
::= { acdSfpDiagEntry 1 }
|
|
|
|
acdSfpDiagConnIdx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the connector index on the box. The index
|
|
is assigned form left to rigth starting with 1."
|
|
::= { acdSfpDiagEntry 2 }
|
|
|
|
acdSfpDiagTemp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Internally measured transceiver temperature. Represented as a
|
|
16 bit signed twos complement value in degrees Celsius, yielding
|
|
a total range of -128C to +128C."
|
|
::= { acdSfpDiagEntry 3 }
|
|
|
|
acdSfpDiagVcc OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Internally measured transceiver supply voltage. Represented as
|
|
a 16 bit unsigned integer with the voltage defined as the full
|
|
16 bit value (0 to 65535) with LSB equal to 100 micro-Volt,
|
|
yielding a total range of 0 to +6.55 Volts."
|
|
::= { acdSfpDiagEntry 4 }
|
|
|
|
acdSfpDiagLbc OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured TX bias current in micro-Amps yielding a total range of
|
|
0 to 131 mA."
|
|
::= { acdSfpDiagEntry 5 }
|
|
|
|
acdSfpDiagTxPwr OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured TX output power in mW. Represented as a 16 bit unsigned
|
|
integer with the power defined as the full 16 bit value (0 to 65535)
|
|
with LSB equal to 0.1 micro-Watt, yielding a total range of 0
|
|
to 6.5535 mW (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpDiagEntry 6 }
|
|
|
|
acdSfpDiagRxPwr OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured Rx input power in mW. Represented as a 16 bit unsigned
|
|
integer with the power defined as the full 16 bit value (0 to 65535)
|
|
with LSB equal to 0.1 micro-Watt, yielding a total range of 0
|
|
to 6.5535 mW (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpDiagEntry 7 }
|
|
|
|
acdSfpDiagTxPwrdBm OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured TX output power in dBm (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpDiagEntry 8 }
|
|
|
|
acdSfpDiagRxPwrdBm OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Measured Rx input power in dBm (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpDiagEntry 9 }
|
|
|
|
-----------------------------------------------------------------------
|
|
-- The Alarm and Warning Thresholds SFP table
|
|
-- This table contains all SFP Alarm and Warning Thresholds.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdSfpThreshTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdSfpThreshEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of all SFP Alarm and Warning Thresholds"
|
|
::= { acdSfp 3 }
|
|
|
|
acdSfpThreshEntry OBJECT-TYPE
|
|
SYNTAX AcdSfpThreshEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is a part the content of the SFP's 0xA0 EEPROM"
|
|
INDEX { acdSfpThreshID }
|
|
::= { acdSfpThreshTable 1 }
|
|
|
|
|
|
AcdSfpThreshEntry ::= SEQUENCE {
|
|
acdSfpThreshID Unsigned32,
|
|
acdSfpThreshConnIdx Unsigned32,
|
|
acdSfpThreshTempHighAlm Integer32,
|
|
acdSfpThreshTempLowAlm Integer32,
|
|
acdSfpThreshTempHighWarn Integer32,
|
|
acdSfpThreshTempLowWarn Integer32,
|
|
acdSfpThreshVccHighAlm Unsigned32,
|
|
acdSfpThreshVccLowAlm Unsigned32,
|
|
acdSfpThreshVccHighWarn Unsigned32,
|
|
acdSfpThreshVccLowWarn Unsigned32,
|
|
acdSfpThreshLbcHighAlm Unsigned32,
|
|
acdSfpThreshLbcLowAlm Unsigned32,
|
|
acdSfpThreshLbcHighWarn Unsigned32,
|
|
acdSfpThreshLbcLowWarn Unsigned32,
|
|
acdSfpThreshTxPwrHighAlm Unsigned32,
|
|
acdSfpThreshTxPwrLowAlm Unsigned32,
|
|
acdSfpThreshTxPwrHighWarn Unsigned32,
|
|
acdSfpThreshTxPwrLowWarn Unsigned32,
|
|
acdSfpThreshRxPwrHighAlm Unsigned32,
|
|
acdSfpThreshRxPwrLowAlm Unsigned32,
|
|
acdSfpThreshRxPwrHighWarn Unsigned32,
|
|
acdSfpThreshRxPwrLowWarn Unsigned32,
|
|
acdSfpThreshTxPwrHighAlmdBm DisplayString,
|
|
acdSfpThreshTxPwrLowAlmdBm DisplayString,
|
|
acdSfpThreshTxPwrHighWarndBm DisplayString,
|
|
acdSfpThreshTxPwrLowWarndBm DisplayString,
|
|
acdSfpThreshRxPwrHighAlmdBm DisplayString,
|
|
acdSfpThreshRxPwrLowAlmdBm DisplayString,
|
|
acdSfpThreshRxPwrHighWarndBm DisplayString,
|
|
acdSfpThreshRxPwrLowWarndBm DisplayString
|
|
|
|
}
|
|
|
|
acdSfpThreshID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each SFP. Its value ranges from 1 to
|
|
MAXINT (4 bytes). "
|
|
::= { acdSfpThreshEntry 1 }
|
|
|
|
acdSfpThreshConnIdx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the connector index on the box. The index
|
|
is assigned form left to rigth starting with 1."
|
|
::= { acdSfpThreshEntry 2 }
|
|
|
|
acdSfpThreshTempHighAlm OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High Alarm transceiver temperature. Represented as a 16 bit
|
|
signed twos complement value in degrees Celsius, yielding
|
|
a total range of -128C to +128C."
|
|
::= { acdSfpThreshEntry 3 }
|
|
|
|
acdSfpThreshTempLowAlm OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low Alarm transceiver temperature. Represented as a 16 bit
|
|
signed twos complement value in degrees Celsius, yielding
|
|
a total range of -128C to +128C."
|
|
::= { acdSfpThreshEntry 4 }
|
|
|
|
acdSfpThreshTempHighWarn OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High Warning transceiver temperature. Represented as a 16 bit
|
|
signed twos complement value in degrees Celsius, yielding
|
|
a total range of -128C to +128C."
|
|
::= { acdSfpThreshEntry 5 }
|
|
|
|
acdSfpThreshTempLowWarn OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low Warning transceiver temperature. Represented as a 16 bit
|
|
signed twos complement value in degrees Celsius, yielding
|
|
a total range of -128C to +128C."
|
|
::= { acdSfpThreshEntry 6 }
|
|
|
|
acdSfpThreshVccHighAlm OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High Alarm transceiver supply voltage. Represented as
|
|
a 16 bit unsigned integer with the voltage defined as the full
|
|
16 bit value (0 to 65535) with LSB equal to 100 micro-Volt,
|
|
yielding a total range of 0 to +6.55 Volts."
|
|
::= { acdSfpThreshEntry 7 }
|
|
|
|
acdSfpThreshVccLowAlm OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low Alarm transceiver supply voltage. Represented as
|
|
a 16 bit unsigned integer with the voltage defined as the full
|
|
16 bit value (0 to 65535) with LSB equal to 100 micro-Volt,
|
|
yielding a total range of 0 to +6.55 Volts."
|
|
::= { acdSfpThreshEntry 8 }
|
|
|
|
acdSfpThreshVccHighWarn OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High Warning transceiver supply voltage. Represented as
|
|
a 16 bit unsigned integer with the voltage defined as the full
|
|
16 bit value (0 to 65535) with LSB equal to 100 micro-Volt,
|
|
yielding a total range of 0 to +6.55 Volts."
|
|
::= { acdSfpThreshEntry 9 }
|
|
|
|
acdSfpThreshVccLowWarn OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low Warning transceiver supply voltage. Represented as
|
|
a 16 bit unsigned integer with the voltage defined as the full
|
|
16 bit value (0 to 65535) with LSB equal to 100 micro-Volt,
|
|
yielding a total range of 0 to +6.55 Volts."
|
|
::= { acdSfpThreshEntry 10 }
|
|
|
|
acdSfpThreshLbcHighAlm OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High Alarm TX bias current in micro-Amps yielding a total range of
|
|
0 to 131 mA."
|
|
::= { acdSfpThreshEntry 11 }
|
|
|
|
acdSfpThreshLbcLowAlm OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low Alarm TX bias current in micro-Amps yielding a total range of
|
|
0 to 131 mA."
|
|
::= { acdSfpThreshEntry 12 }
|
|
|
|
acdSfpThreshLbcHighWarn OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High Warning TX bias current in micro-Amps yielding a total range of
|
|
0 to 131 mA."
|
|
::= { acdSfpThreshEntry 13 }
|
|
|
|
acdSfpThreshLbcLowWarn OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low Warning TX bias current in micro-Amps yielding a total range of
|
|
0 to 131 mA."
|
|
::= { acdSfpThreshEntry 14 }
|
|
|
|
acdSfpThreshTxPwrHighAlm OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High Alarm TX output power in mW. Represented as a 16 bit unsigned
|
|
integer with the power defined as the full 16 bit value (0 to 65535)
|
|
with LSB equal to 0.1 micro-Watt, yielding a total range of 0
|
|
to 6.5535 mW (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpThreshEntry 15 }
|
|
|
|
acdSfpThreshTxPwrLowAlm OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low Alarm TX output power in mW. Represented as a 16 bit unsigned
|
|
integer with the power defined as the full 16 bit value (0 to 65535)
|
|
with LSB equal to 0.1 micro-Watt, yielding a total range of 0
|
|
to 6.5535 mW (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpThreshEntry 16 }
|
|
|
|
acdSfpThreshTxPwrHighWarn OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High Warning TX output power in mW. Represented as a 16 bit unsigned
|
|
integer with the power defined as the full 16 bit value (0 to 65535)
|
|
with LSB equal to 0.1 micro-Watt, yielding a total range of 0
|
|
to 6.5535 mW (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpThreshEntry 17 }
|
|
|
|
acdSfpThreshTxPwrLowWarn OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low Warning TX output power in mW. Represented as a 16 bit unsigned
|
|
integer with the power defined as the full 16 bit value (0 to 65535)
|
|
with LSB equal to 0.1 micro-Watt, yielding a total range of 0
|
|
to 6.5535 mW (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpThreshEntry 18 }
|
|
|
|
acdSfpThreshRxPwrHighAlm OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High Alarm RX input power in mW. Represented as a 16 bit unsigned
|
|
integer with the power defined as the full 16 bit value (0 to 65535)
|
|
with LSB equal to 0.1 micro-Watt, yielding a total range of 0
|
|
to 6.5535 mW (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpThreshEntry 19 }
|
|
|
|
acdSfpThreshRxPwrLowAlm OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low Alarm RX input power in mW. Represented as a 16 bit unsigned
|
|
integer with the power defined as the full 16 bit value (0 to 65535)
|
|
with LSB equal to 0.1 micro-Watt, yielding a total range of 0
|
|
to 6.5535 mW (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpThreshEntry 20 }
|
|
|
|
acdSfpThreshRxPwrHighWarn OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High Warning RX input power in mW. Represented as a 16 bit unsigned
|
|
integer with the power defined as the full 16 bit value (0 to 65535)
|
|
with LSB equal to 0.1 micro-Watt, yielding a total range of 0
|
|
to 6.5535 mW (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpThreshEntry 21 }
|
|
|
|
acdSfpThreshRxPwrLowWarn OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low Warning RX input power in mW. Represented as a 16 bit unsigned
|
|
integer with the power defined as the full 16 bit value (0 to 65535)
|
|
with LSB equal to 0.1 micro-Watt, yielding a total range of 0
|
|
to 6.5535 mW (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpThreshEntry 22 }
|
|
|
|
acdSfpThreshTxPwrHighAlmdBm OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High Alarm TX output power in dBm (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpThreshEntry 23 }
|
|
|
|
acdSfpThreshTxPwrLowAlmdBm OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low Alarm TX output power in dBm (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpThreshEntry 24 }
|
|
|
|
acdSfpThreshTxPwrHighWarndBm OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High Warning TX output power in dBm (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpThreshEntry 25 }
|
|
|
|
acdSfpThreshTxPwrLowWarndBm OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low Warning TX output power in dBm (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpThreshEntry 26 }
|
|
|
|
acdSfpThreshRxPwrHighAlmdBm OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High Alarm Rx input power in dBm (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpThreshEntry 27 }
|
|
|
|
acdSfpThreshRxPwrLowAlmdBm OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low Alarm Rx input power in dBm (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpThreshEntry 28 }
|
|
|
|
acdSfpThreshRxPwrHighWarndBm OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High Warning Rx input power in dBm (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpThreshEntry 29 }
|
|
|
|
acdSfpThreshRxPwrLowWarndBm OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low Warning Rx input power in dBm (~ -40 to +8.2 dBm)."
|
|
::= { acdSfpThreshEntry 30 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- The Alarm and Warning Thresholds SFP Status table
|
|
-- This table contains all statuses for the SFP Alarm and Warning Thresholds.
|
|
------------------------------------------------------------------------------
|
|
|
|
acdSfpThreshStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdSfpThreshStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of all SFP Digital Diagnostics Thresholds statuses"
|
|
::= { acdSfp 4 }
|
|
|
|
acdSfpThreshStatusEntry OBJECT-TYPE
|
|
SYNTAX AcdSfpThreshStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a part the content of the SFP's 0xA2 EEPROM"
|
|
INDEX { acdSfpThreshStatusID }
|
|
::= { acdSfpThreshStatusTable 1 }
|
|
|
|
|
|
AcdSfpThreshStatusEntry ::= SEQUENCE {
|
|
acdSfpThreshStatusID Unsigned32,
|
|
acdSfpThreshStatusConnIdx Unsigned32,
|
|
acdSfpThreshStatusTempHighAlm TruthValue,
|
|
acdSfpThreshStatusTempLowAlm TruthValue,
|
|
acdSfpThreshStatusTempHighWarn TruthValue,
|
|
acdSfpThreshStatusTempLowWarn TruthValue,
|
|
acdSfpThreshStatusVccHighAlm TruthValue,
|
|
acdSfpThreshStatusVccLowAlm TruthValue,
|
|
acdSfpThreshStatusVccHighWarn TruthValue,
|
|
acdSfpThreshStatusVccLowWarn TruthValue,
|
|
acdSfpThreshStatusLbcHighAlm TruthValue,
|
|
acdSfpThreshStatusLbcLowAlm TruthValue,
|
|
acdSfpThreshStatusLbcHighWarn TruthValue,
|
|
acdSfpThreshStatusLbcLowWarn TruthValue,
|
|
acdSfpThreshStatusTxPwrHighAlm TruthValue,
|
|
acdSfpThreshStatusTxPwrLowAlm TruthValue,
|
|
acdSfpThreshStatusTxPwrHighWarn TruthValue,
|
|
acdSfpThreshStatusTxPwrLowWarn TruthValue,
|
|
acdSfpThreshStatusRxPwrHighAlm TruthValue,
|
|
acdSfpThreshStatusRxPwrLowAlm TruthValue,
|
|
acdSfpThreshStatusRxPwrHighWarn TruthValue,
|
|
acdSfpThreshStatusRxPwrLowWarn TruthValue
|
|
}
|
|
|
|
acdSfpThreshStatusID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each SFP. Its value ranges from 1 to
|
|
MAXINT (4 bytes). "
|
|
::= { acdSfpThreshStatusEntry 1 }
|
|
|
|
acdSfpThreshStatusConnIdx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the connector index on the box. The index
|
|
is assigned form left to rigth starting with 1."
|
|
::= { acdSfpThreshStatusEntry 2 }
|
|
|
|
acdSfpThreshStatusTempHighAlm OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the temperature reaches or overpasses the High
|
|
alarm threshold."
|
|
::= { acdSfpThreshStatusEntry 3 }
|
|
|
|
acdSfpThreshStatusTempLowAlm OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the temperature reaches or underpasses the Low
|
|
alarm threshold."
|
|
::= { acdSfpThreshStatusEntry 4 }
|
|
|
|
acdSfpThreshStatusTempHighWarn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the temperature reaches or overpasses the High
|
|
warning threshold."
|
|
::= { acdSfpThreshStatusEntry 5 }
|
|
|
|
acdSfpThreshStatusTempLowWarn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the temperature reaches or underpasses the Low
|
|
warning threshold."
|
|
::= { acdSfpThreshStatusEntry 6 }
|
|
|
|
acdSfpThreshStatusVccHighAlm OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the supply voltage reaches or overpasses the High
|
|
alarm threshold."
|
|
::= { acdSfpThreshStatusEntry 7 }
|
|
|
|
acdSfpThreshStatusVccLowAlm OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the supply voltage reaches or underpasses the Low
|
|
alarm threshold."
|
|
::= { acdSfpThreshStatusEntry 8 }
|
|
|
|
acdSfpThreshStatusVccHighWarn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the supply voltage reaches or overpasses the High
|
|
warning threshold."
|
|
::= { acdSfpThreshStatusEntry 9 }
|
|
|
|
acdSfpThreshStatusVccLowWarn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the supply voltage reaches or underpasses the Low
|
|
warning threshold."
|
|
::= { acdSfpThreshStatusEntry 10 }
|
|
|
|
acdSfpThreshStatusLbcHighAlm OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the Laser Bias Current reaches or overpasses
|
|
the High alarm threshold."
|
|
::= { acdSfpThreshStatusEntry 11 }
|
|
|
|
acdSfpThreshStatusLbcLowAlm OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the Laser Bias Current reaches or underpasses
|
|
the Low alarm threshold."
|
|
::= { acdSfpThreshStatusEntry 12 }
|
|
|
|
acdSfpThreshStatusLbcHighWarn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the Laser Bias Current reaches or overpasses
|
|
the High warning threshold."
|
|
::= { acdSfpThreshStatusEntry 13 }
|
|
|
|
acdSfpThreshStatusLbcLowWarn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the Laser Bias Current reaches or underpasses
|
|
the Low warning threshold."
|
|
::= { acdSfpThreshStatusEntry 14 }
|
|
|
|
acdSfpThreshStatusTxPwrHighAlm OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the Transmit Power reaches or overpasses the High
|
|
alarm threshold."
|
|
::= { acdSfpThreshStatusEntry 15 }
|
|
|
|
acdSfpThreshStatusTxPwrLowAlm OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the Transmit Power reaches or underpasses the Low
|
|
alarm threshold."
|
|
::= { acdSfpThreshStatusEntry 16 }
|
|
|
|
acdSfpThreshStatusTxPwrHighWarn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the Transmit Power reaches or overpasses the High
|
|
warning threshold."
|
|
::= { acdSfpThreshStatusEntry 17 }
|
|
|
|
acdSfpThreshStatusTxPwrLowWarn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the Transmit Power reaches or underpasses the Low
|
|
warning threshold."
|
|
::= { acdSfpThreshStatusEntry 18 }
|
|
|
|
acdSfpThreshStatusRxPwrHighAlm OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the Receive Power reaches or overpasses the High
|
|
alarm threshold."
|
|
::= { acdSfpThreshStatusEntry 19 }
|
|
|
|
acdSfpThreshStatusRxPwrLowAlm OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the Receive Power reaches or underpasses the Low
|
|
alarm threshold."
|
|
::= { acdSfpThreshStatusEntry 20 }
|
|
|
|
acdSfpThreshStatusRxPwrHighWarn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the Receive Power reaches or overpasses the High
|
|
warning threshold."
|
|
::= { acdSfpThreshStatusEntry 21 }
|
|
|
|
acdSfpThreshStatusRxPwrLowWarn OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is to indicate if the Receive Power reaches or underpasses the Low
|
|
warning threshold."
|
|
::= { acdSfpThreshStatusEntry 22 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- ACD-SFP-MIB Module - Conformance Information
|
|
---------------------------------------------------------------------------
|
|
|
|
acdSfpCompliances OBJECT IDENTIFIER ::= { acdSfpConformance 1 }
|
|
acdSfpGroups OBJECT IDENTIFIER ::= { acdSfpConformance 2 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- Units of conformance
|
|
---------------------------------------------------------------------------
|
|
|
|
acdSfpInfoGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdSfpInfoConnIdx,
|
|
acdSfpInfoConnType,
|
|
acdSfpInfoVendor,
|
|
acdSfpInfoVendorOui,
|
|
acdSfpInfoVendorPn,
|
|
acdSfpInfoVendorRev,
|
|
acdSfpInfoWavelength,
|
|
acdSfpInfoSerialNum,
|
|
acdSfpInfoYear,
|
|
acdSfpInfoMonth,
|
|
acdSfpInfoDay,
|
|
acdSfpInfoLot,
|
|
acdSfpInfoRev8472,
|
|
acdSfpInfoPresent,
|
|
acdSfpInfoDiag,
|
|
acdSfpInfoInternal,
|
|
acdSfpInfoAlm,
|
|
acdSfpInfoIdType,
|
|
acdSfpInfoExtIdType,
|
|
acdSfpInfoTransCode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the SFP information Group."
|
|
::= { acdSfpGroups 1 }
|
|
|
|
acdSfpDiagGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdSfpDiagConnIdx,
|
|
acdSfpDiagTemp,
|
|
acdSfpDiagVcc,
|
|
acdSfpDiagLbc,
|
|
acdSfpDiagTxPwr,
|
|
acdSfpDiagRxPwr,
|
|
acdSfpDiagTxPwrdBm,
|
|
acdSfpDiagRxPwrdBm
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the SFP diagnostics Group."
|
|
::= { acdSfpGroups 2 }
|
|
|
|
acdSfpThreshGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdSfpThreshConnIdx,
|
|
acdSfpThreshTempHighAlm,
|
|
acdSfpThreshTempLowAlm,
|
|
acdSfpThreshTempHighWarn,
|
|
acdSfpThreshTempLowWarn,
|
|
acdSfpThreshVccHighAlm,
|
|
acdSfpThreshVccLowAlm,
|
|
acdSfpThreshVccHighWarn,
|
|
acdSfpThreshVccLowWarn,
|
|
acdSfpThreshLbcHighAlm,
|
|
acdSfpThreshLbcLowAlm,
|
|
acdSfpThreshLbcHighWarn,
|
|
acdSfpThreshLbcLowWarn,
|
|
acdSfpThreshTxPwrHighAlm,
|
|
acdSfpThreshTxPwrLowAlm,
|
|
acdSfpThreshTxPwrHighWarn,
|
|
acdSfpThreshTxPwrLowWarn,
|
|
acdSfpThreshRxPwrHighAlm,
|
|
acdSfpThreshRxPwrLowAlm,
|
|
acdSfpThreshRxPwrHighWarn,
|
|
acdSfpThreshRxPwrLowWarn,
|
|
acdSfpThreshTxPwrHighAlmdBm,
|
|
acdSfpThreshTxPwrLowAlmdBm,
|
|
acdSfpThreshTxPwrHighWarndBm,
|
|
acdSfpThreshTxPwrLowWarndBm,
|
|
acdSfpThreshRxPwrHighAlmdBm,
|
|
acdSfpThreshRxPwrLowAlmdBm,
|
|
acdSfpThreshRxPwrHighWarndBm,
|
|
acdSfpThreshRxPwrLowWarndBm
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the SFP thresholds Group."
|
|
::= { acdSfpGroups 3 }
|
|
|
|
acdSfpThreshStatusGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdSfpThreshStatusConnIdx,
|
|
acdSfpThreshStatusTempHighAlm,
|
|
acdSfpThreshStatusTempLowAlm,
|
|
acdSfpThreshStatusTempHighWarn,
|
|
acdSfpThreshStatusTempLowWarn,
|
|
acdSfpThreshStatusVccHighAlm,
|
|
acdSfpThreshStatusVccLowAlm,
|
|
acdSfpThreshStatusVccHighWarn,
|
|
acdSfpThreshStatusVccLowWarn,
|
|
acdSfpThreshStatusLbcHighAlm,
|
|
acdSfpThreshStatusLbcLowAlm,
|
|
acdSfpThreshStatusLbcHighWarn,
|
|
acdSfpThreshStatusLbcLowWarn,
|
|
acdSfpThreshStatusTxPwrHighAlm,
|
|
acdSfpThreshStatusTxPwrLowAlm,
|
|
acdSfpThreshStatusTxPwrHighWarn,
|
|
acdSfpThreshStatusTxPwrLowWarn,
|
|
acdSfpThreshStatusRxPwrHighAlm,
|
|
acdSfpThreshStatusRxPwrLowAlm,
|
|
acdSfpThreshStatusRxPwrHighWarn,
|
|
acdSfpThreshStatusRxPwrLowWarn
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the SFP threshold status Group."
|
|
::= { acdSfpGroups 4 }
|
|
|
|
acdSfpCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for support of the ACD-SFP-MIB module."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
acdSfpInfoGroup,
|
|
acdSfpDiagGroup,
|
|
acdSfpThreshGroup,
|
|
acdSfpThreshStatusGroup
|
|
}
|
|
|
|
::= { acdSfpCompliances 1 }
|
|
|
|
END
|