467 lines
16 KiB
Plaintext
467 lines
16 KiB
Plaintext
--
|
|
-- Accedian Enterprise Specific MIB
|
|
--
|
|
-- Copyright (c) 2005-2008, Accedian Networks, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- The contents of this document are subject to change without notice.
|
|
--
|
|
|
|
|
|
ACD-SMAP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
DisplayString, TruthValue, RowStatus
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
|
|
acdMibs
|
|
FROM ACCEDIAN-SMI;
|
|
|
|
acdSmap MODULE-IDENTITY
|
|
|
|
LAST-UPDATED "200810010100Z"
|
|
ORGANIZATION "Accedian Networks, Inc."
|
|
CONTACT-INFO
|
|
"Accedian Technical Assistance Center
|
|
Accedian Networks, Inc.
|
|
4878 Levy, suite 202
|
|
Saint-Laurent, Quebec Canada H4R 2P1
|
|
E-mail: support@accedian.com"
|
|
DESCRIPTION
|
|
"The Service mapping database for this Accedian Networks device."
|
|
|
|
REVISION "200810010100Z" -- 1 October 2008
|
|
DESCRIPTION
|
|
"Definition revision."
|
|
|
|
REVISION "200806150100Z" -- 15 June 2008
|
|
DESCRIPTION
|
|
"Initial version of MIB module ACD-SMAP-MIB."
|
|
|
|
::= { acdMibs 8 }
|
|
|
|
acdSmapNotifications OBJECT IDENTIFIER ::= { acdSmap 0 }
|
|
acdSmapMIBObjects OBJECT IDENTIFIER ::= { acdSmap 1 }
|
|
acdSmapConformance OBJECT IDENTIFIER ::= { acdSmap 2 }
|
|
|
|
acdSmapConfig OBJECT IDENTIFIER ::= { acdSmapMIBObjects 1 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The CoS Profile configuration table
|
|
-- This table contains all CoS Profile entry configurations.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdSmapCoSProfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdSmapCoSProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CoS profile table. Each row in the table represents a CoS Profile.
|
|
A CoS profile is used to map an input packet to an L2 class of service.
|
|
This traffic mapping (classification) is accomplished using one of
|
|
the following fields in the incoming packet:
|
|
|
|
p-bits in 802.1Q / 802.1Q-in-Q tags
|
|
IP precedence bits in IPv4 TOS byte
|
|
DSCP bits in IPv4 DSCP byte
|
|
|
|
The class of service value (0-7) assigned to the outgoing traffic is
|
|
selected based on the conformance level (Green/Yellow) of the incoming
|
|
traffic. The following sections describe the general configuration
|
|
parameters and the mapping table of a CoS profile."
|
|
::= { acdSmapConfig 1 }
|
|
|
|
acdSmapCoSProfEntry OBJECT-TYPE
|
|
SYNTAX AcdSmapCoSProfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of all settings to manage a CoS profile."
|
|
INDEX { acdSmapCoSProfID }
|
|
::= { acdSmapCoSProfTable 1 }
|
|
|
|
AcdSmapCoSProfEntry ::= SEQUENCE {
|
|
acdSmapCoSProfID Unsigned32,
|
|
acdSmapCoSProfRowStatus RowStatus,
|
|
acdSmapCoSProfName DisplayString,
|
|
acdSmapCoSProfType INTEGER,
|
|
acdSmapCoSProfDecodeDropBit TruthValue,
|
|
acdSmapCoSProfEncodeDropBit TruthValue
|
|
}
|
|
|
|
acdSmapCoSProfID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each CoS Profile instance."
|
|
::= { acdSmapCoSProfEntry 1 }
|
|
|
|
acdSmapCoSProfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"All columns must have a valid value before a row can be activated. To
|
|
create a new CoS Profile you shall provide the a unique name and the
|
|
type for an empty row with the RowStatus set to Create and Go. To
|
|
delete the CoS Profile you need to set the RowStatus to destroy."
|
|
::= { acdSmapCoSProfEntry 2 }
|
|
|
|
acdSmapCoSProfName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a string to uniquely identify the CoS profile."
|
|
::= { acdSmapCoSProfEntry 3 }
|
|
|
|
acdSmapCoSProfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pcp(1),
|
|
dscp(2),
|
|
pre(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the type of CoS profile. Possible values are: PCP, IP
|
|
precedence or DSCP."
|
|
::= { acdSmapCoSProfEntry 4 }
|
|
|
|
acdSmapCoSProfDecodeDropBit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is only valid for PCP CoS profiles. If this field is set,
|
|
the pre-marking color is decoded from the DEI bit (Drop Eligible
|
|
Indication). Otherwise, the user defined pre-color is used."
|
|
DEFVAL { false }
|
|
::= { acdSmapCoSProfEntry 5 }
|
|
|
|
acdSmapCoSProfEncodeDropBit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field controls the DEI bit in an S-VLAN tag. If this field is set
|
|
and the outgoing packet is marked yellow then the DEI bit is set to 1.
|
|
Otherwise, the DEI is set to 0."
|
|
DEFVAL { false }
|
|
::= { acdSmapCoSProfEntry 6 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The CoS Profile Code Point configuration table
|
|
-- This table contains all Code Point for a CoS profile entry.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdSmapCoSProfCodePointTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdSmapCoSProfCodePointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Configuration table of all code point entries. Each row in the
|
|
table represents a Code point. the number of code points depend of the
|
|
acdSmapCoSProfType value.
|
|
|
|
p-bits in 802.1Q / 802.1Q-in-Q tags
|
|
IP precedence bits in IPv4 TOS byte
|
|
DSCP bits in IPv4 DSCP byte
|
|
|
|
The class of service value (0-7) assigned to the outgoing traffic is
|
|
selected based on the conformance level (Green/Yellow) of the incoming
|
|
traffic."
|
|
::= { acdSmapConfig 2 }
|
|
|
|
acdSmapCoSProfCodePointEntry OBJECT-TYPE
|
|
SYNTAX AcdSmapCoSProfCodePointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of all settings for a code point."
|
|
INDEX { acdSmapCoSProfID, acdSmapCoSProfCodePointID }
|
|
::= { acdSmapCoSProfCodePointTable 1 }
|
|
|
|
AcdSmapCoSProfCodePointEntry ::= SEQUENCE {
|
|
acdSmapCoSProfCodePointID Unsigned32,
|
|
acdSmapCoSProfCodePointPreMarkingColor INTEGER,
|
|
acdSmapCoSProfCodePointGreenOut Unsigned32,
|
|
acdSmapCoSProfCodePointYellowOut Unsigned32
|
|
}
|
|
|
|
acdSmapCoSProfCodePointID OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..63)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each row. Base on Code Point, 0 to 63 for DSCP or 0
|
|
to 7 for PCP or IP precedence."
|
|
::= { acdSmapCoSProfCodePointEntry 1 }
|
|
|
|
acdSmapCoSProfCodePointPreMarkingColor OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
green(1),
|
|
yellow(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the user pre-color to mark the incoming traffic. This field
|
|
is only valid if acdSmapCoSProfDecodeDropBit is not set."
|
|
DEFVAL { green }
|
|
::= { acdSmapCoSProfCodePointEntry 2 }
|
|
|
|
acdSmapCoSProfCodePointGreenOut OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The class of service value that will be used in the outgoing green
|
|
packets. This value is selected if the result of the bandwidth
|
|
regulator assigned to this entry is green or if the pre-marking
|
|
color is green and no bandwidth regulator is assigned to this entry."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapCoSProfCodePointEntry 3 }
|
|
|
|
acdSmapCoSProfCodePointYellowOut OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The class of service value that will be used in the outgoing yellow
|
|
packets. This value is selected if the result of the bandwidth
|
|
regulator assigned to this entry is yellow or if the pre-marking
|
|
color is yellow and no bandwidth regulator is assigned to this entry."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapCoSProfCodePointEntry 4 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The Regulator Set configuration table
|
|
-- This table contains all Regulator Set entry configurations.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdSmapRegSetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdSmapRegSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Regulator Set profile table. Each row in the table represents a
|
|
Regulator Set. A bandwidth regulator set allows the user to regulate
|
|
traffic based on the following information:
|
|
|
|
p-bits in 802.1Q / 802.1Q-in-Q tags
|
|
IP precedence bits in IPv4 TOS byte
|
|
DSCP bits in IPv4 DSCP byte.
|
|
"
|
|
::= { acdSmapConfig 3 }
|
|
|
|
acdSmapRegSetEntry OBJECT-TYPE
|
|
SYNTAX AcdSmapRegSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of all settings to manage a Regulator set."
|
|
INDEX { acdSmapRegSetID }
|
|
::= { acdSmapRegSetTable 1 }
|
|
|
|
AcdSmapRegSetEntry ::= SEQUENCE {
|
|
acdSmapRegSetID Unsigned32,
|
|
acdSmapRegSetRowStatus RowStatus,
|
|
acdSmapRegSetName DisplayString,
|
|
acdSmapRegSetType INTEGER
|
|
}
|
|
|
|
acdSmapRegSetID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each Regulator set instance."
|
|
::= { acdSmapRegSetEntry 1 }
|
|
|
|
acdSmapRegSetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"All columns must have a valid value before a row can be activated. To
|
|
create a new Regulator set you shall provide the a unique name and the
|
|
type for an empty row with the RowStatus set to Create and Go. To
|
|
delete the CoS Profile you need to set the RowStatus to destroy."
|
|
::= { acdSmapRegSetEntry 2 }
|
|
|
|
acdSmapRegSetName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a string to uniquely identify the Regulator set."
|
|
::= { acdSmapRegSetEntry 3 }
|
|
|
|
acdSmapRegSetType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pcp(1),
|
|
dscp(2),
|
|
pre(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the type of Regulator Set. Possible values are: PCP, IP
|
|
precedence or DSCP."
|
|
::= { acdSmapRegSetEntry 4 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- The Regulator Set Code Point configuration table
|
|
-- This table contains all Code Point for a Regulator set profile entry.
|
|
---------------------------------------------------------------------------
|
|
|
|
acdSmapRegSetCodePointTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdSmapRegSetCodePointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Configuration table of all code point entries. Each row in the
|
|
table represents a Code point. the number of code points depend of the
|
|
acdSmapCoSProfType value.
|
|
|
|
p-bits in 802.1Q / 802.1Q-in-Q tags;
|
|
IP precedence bits in IPv4 TOS byte;
|
|
DSCP bits in IPv4 DSCP byte.
|
|
"
|
|
::= { acdSmapConfig 4 }
|
|
|
|
acdSmapRegSetCodePointEntry OBJECT-TYPE
|
|
SYNTAX AcdSmapRegSetCodePointEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry consisting of all settings for a code point."
|
|
INDEX { acdSmapRegSetID, acdSmapRegSetCodePointID }
|
|
::= { acdSmapRegSetCodePointTable 1 }
|
|
|
|
AcdSmapRegSetCodePointEntry ::= SEQUENCE {
|
|
acdSmapRegSetCodePointID Unsigned32,
|
|
acdSmapRegSetCodePointRegulatorID Unsigned32,
|
|
acdSmapRegSetCodePointRegulatorEnable TruthValue
|
|
}
|
|
|
|
acdSmapRegSetCodePointID OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..63)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique value for each row. Base on Code Point, 0 to 64 for DSCP or 0
|
|
to 7 for PCP or IP precedence."
|
|
::= { acdSmapRegSetCodePointEntry 1 }
|
|
|
|
|
|
acdSmapRegSetCodePointRegulatorID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bandwidth regulator that will be used to regulate the traffic flow
|
|
that has this PCP/IP precendence/DSCP value. Refer to acdRegulatorTable
|
|
to find the exact identifier (same as acdRegulatorID)."
|
|
DEFVAL { 0 }
|
|
::= { acdSmapRegSetCodePointEntry 2 }
|
|
|
|
acdSmapRegSetCodePointRegulatorEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable traffic regulation for this PCP, IP precedence or
|
|
DSCP value."
|
|
DEFVAL { false }
|
|
::= { acdSmapRegSetCodePointEntry 3 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- ACD-SMAP-MIB Module - Conformance Information
|
|
---------------------------------------------------------------------------
|
|
|
|
acdSmapCompliances OBJECT IDENTIFIER ::= { acdSmapConformance 1 }
|
|
acdSmapGroups OBJECT IDENTIFIER ::= { acdSmapConformance 2 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- Units of conformance
|
|
---------------------------------------------------------------------------
|
|
|
|
acdSmapCoSProfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdSmapCoSProfRowStatus,
|
|
acdSmapCoSProfName,
|
|
acdSmapCoSProfType,
|
|
acdSmapCoSProfDecodeDropBit,
|
|
acdSmapCoSProfEncodeDropBit
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the CoS profile Group."
|
|
::= { acdSmapGroups 1 }
|
|
|
|
acdSmapCoSProfCodePointGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdSmapCoSProfCodePointPreMarkingColor,
|
|
acdSmapCoSProfCodePointGreenOut,
|
|
acdSmapCoSProfCodePointYellowOut
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the CoS profile CodePoint Group."
|
|
::= { acdSmapGroups 2 }
|
|
|
|
acdSmapRegSetGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdSmapRegSetRowStatus,
|
|
acdSmapRegSetName,
|
|
acdSmapRegSetType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the Regulator Set Group."
|
|
::= { acdSmapGroups 3 }
|
|
|
|
acdSmapRegSetCodePointGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdSmapRegSetCodePointRegulatorID,
|
|
acdSmapRegSetCodePointRegulatorEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects for the Regulator Set CodePoint Group."
|
|
::= { acdSmapGroups 4 }
|
|
|
|
acdSmapCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for support of the ACD-SMAP-MIB module."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
acdSmapCoSProfGroup,
|
|
acdSmapCoSProfCodePointGroup,
|
|
acdSmapRegSetGroup,
|
|
acdSmapRegSetCodePointGroup
|
|
}
|
|
|
|
OBJECT acdSmapCoSProfRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
|
|
DESCRIPTION "Support for createAndWait is not required."
|
|
|
|
OBJECT acdSmapRegSetRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
|
|
DESCRIPTION "Support for createAndWait is not required."
|
|
|
|
::= { acdSmapCompliances 1 }
|
|
|
|
END
|