mibs/MIBS/adtran/ADTRAN-AOSDOWNLOAD
2023-12-05 12:25:34 +01:00

604 lines
25 KiB
Plaintext

ADTRAN-AOSDOWNLOAD DEFINITIONS ::= BEGIN
IMPORTS
Integer32, Gauge32, OBJECT-TYPE, MODULE-IDENTITY
FROM SNMPv2-SMI
DisplayString, RowStatus, TDomain, TAddress
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
adIdentity
FROM ADTRAN-MIB
adGenAOSCommon, adGenAOSConformance
FROM ADTRAN-AOS;
adAOSDownloadMib MODULE-IDENTITY
LAST-UPDATED "200409212216Z" -- September 21, 2004
ORGANIZATION "ADTRAN, Inc."
CONTACT-INFO
" Technical Support Dept.
Postal: ADTRAN, Inc.
901 Explorer Blvd.
Huntsville, AL 35806
Tel: +1 800 726-8663
Fax: +1 256 963 6217
E-mail: support@adtran.com"
DESCRIPTION
"This MIB defines how the method for commanding an ADTRAN
OS device to initiate a download or upload of configuration
or firmware from a TFTP server "
REVISION "200409212216Z" -- September 21, 2004
DESCRIPTION
"Initial version of this MIB module."
::= { adIdentity 10000 53 1 3 }
adAOSDownload OBJECT IDENTIFIER ::= { adGenAOSCommon 3 }
adAOSDownloadTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdAOSDownloadEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of firmware downloads to this device.
There will at any time be either 0 or 1 rows in
this table, and the only valid index for this
table is 1. It is only a table so that we may
take advantage of the RowStatus textual convention
for configuring the download parameters."
::= { adAOSDownload 1 }
adAOSDownloadEntry OBJECT-TYPE
SYNTAX AdAOSDownloadEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row in the adAOSDownloadTable containing the
download parameters."
INDEX { adAOSDownloadIndex }
::= { adAOSDownloadTable 1 }
AdAOSDownloadEntry ::=
SEQUENCE {
adAOSDownloadIndex INTEGER,
adAOSDownloadOwnerAddress TAddress,
adAOSDownloadOwnerDomain TDomain,
adAOSDownloadTAddress TAddress,
adAOSDownloadTDomain TDomain,
adAOSDownloadFilename DisplayString,
adAOSDownloadResetType INTEGER,
adAOSDownloadErrorStatus INTEGER,
adAOSDownloadErrorText DisplayString,
adAOSDownloadStatus RowStatus,
adAOSDownloadPassesLeft Integer32,
adAOSDownloadOctetCount Integer32,
adAOSDownloadDestination DisplayString, --deprecated
adAOSDownloadDestinationType INTEGER
}
adAOSDownloadIndex OBJECT-TYPE
SYNTAX INTEGER {
dlInstance(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index which uniquely identifies this row.
The only legal value for this object is 1."
::= { adAOSDownloadEntry 1 }
adAOSDownloadOwnerAddress OBJECT-TYPE
SYNTAX TAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport address of the management station
that initiated this download attempt, formatted
according to the value of the associated instance
of adAOSDownloadOwnerDomain."
::= { adAOSDownloadEntry 2 }
adAOSDownloadOwnerDomain OBJECT-TYPE
SYNTAX TDomain
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The kind of transport service used by the
management station that initiated this download
attempt."
::= { adAOSDownloadEntry 3 }
adAOSDownloadTAddress OBJECT-TYPE
SYNTAX TAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The transport address of the node to download
firmware from, formatted according to the value of
the associated instance of adAOSDownloadTDomain.
An attempt to modify this value will fail if the
associated adAOSDownloadStatus object would be
equal to 'active' both before and after the
modification attempt."
::= { adAOSDownloadEntry 4 }
adAOSDownloadTDomain OBJECT-TYPE
SYNTAX TDomain
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The kind of transport service to be used for the
download. Currently supports snmpUDPDomain and
snmpIPXDomain.
An attempt to modify this value will fail if the
associated adAOSDownloadStatus object would be
equal to 'active' both before and after the
modification attempt."
::= { adAOSDownloadEntry 5 }
adAOSDownloadFilename OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Filename and path of file to download (maximum
length of 63 characters + NULL).
An attempt to modify this value will fail if the
associated adAOSDownloadStatus object would be
equal to 'active' both before and after the
modification attempt."
::= { adAOSDownloadEntry 6 }
adAOSDownloadResetType OBJECT-TYPE
SYNTAX INTEGER {
noReset(1),
warmReset(2),
factoryReset(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of reset to perform after completion of
the firmware download. Note that not all agents
will support all possible values, and there may
be other agent-specific values for this object."
::= { adAOSDownloadEntry 7 }
adAOSDownloadErrorStatus OBJECT-TYPE
SYNTAX INTEGER {
fileNotFound(1),
accessViolation(2),
diskFull(3),
illegalOperation(4),
unknownTID(5),
fileExists(6),
noSuchUser(7),
notDefined(8),
corruptFile(9),
noServer(10),
tftpTimeout(11),
hardwareError(12),
success(13),
aborted(14),
inProgress(15),
idle(16),
erasingEeprom(17),
incompleteFirmware(18),
requirePowerCycle(19),
cannotUpgrade(20),
cannotDowngrade(21)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of download. The first seven codes are
equal to the codes defined by the TFTP protocol.
'notDefined' is the same as TFTP protocol error 0.
The following are the other possible values for this
object:
corruptFile - the agent detected a problem
with the download file format.
noServer - the TFTP server at
adAOSDownloadTAddress did not
respond to the TFTP request.
tftpTimeout - the download was aborted due
to excessive timeouts.
hardwareError - there was a hardware problem
on the agent that forced an
abort of the download (see
adAOSDownloadErrorText for
more detailed information).
success - the download has completed
successfully.
aborted - the download was aborted by
setting the
adAOSDownloadStatus to
'notInService' or 'delete'.
inProgress - the TFTP transfer is currently
active.
idle - means that the download has
not yet started (i.e. the
value of adAOSDownloadStatus
has not yet been set to
'active').
erasingEeprom - the agent is currently erasing
the EEPROM device.
incompleteFirmware - the agent is running an
incomplete version of firmware
and requires a download.
requirePowerCycle - the agent must be power cycled
to run the newly downloaded
firmware.
cannotUpgrade - the agent's current firmware
revision cannot be upgraded to
the revision in the download
file.
cannotDowngrade - the agent's current firmware
revision cannot be downgraded
to the revision in the
download file."
::= { adAOSDownloadEntry 8 }
adAOSDownloadErrorText OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of the current error status
of the firmware download."
::= { adAOSDownloadEntry 9 }
adAOSDownloadStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this download entry. This object
may not be set to 'active' unless the following
columnar objects exist in this row:
adAOSDownloadTAddress, adAOSDownloadTDomain,
adAOSDownloadFilename, and
adAOSDownloadResetType."
::= { adAOSDownloadEntry 10 }
adAOSDownloadPassesLeft OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of passes remaining in the current
download attempt. Some agents require multiple
passes through the download file in order to
download a firmware image. This object indicates
the number of passes remaining, including the
current pass. The object is initialized by the
agent to the number of passes required to complete
the download when the corresponding instance of
adAOSDownloadStatus is set to 'active'. It is
decremented by one each time a pass completes."
::= { adAOSDownloadEntry 11 }
adAOSDownloadOctetCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets that have been transferred
during the current pass. This object is initialized
to zero by the agent when the corresponding instance
of adAOSDownloadStatus is set to 'active', and
reinitialized to zero at the beginning of each pass."
::= { adAOSDownloadEntry 12 }
adAOSDownloadDestination OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The destination of the download file.
The allowable destination names depend on the type
of agent being downloaded. In all cases, a
destination of '/os/primary' or '/os/secondary'
indicates that this is a download of the agent's
firmware image. The agent will use '/os/primary'
as the default value for this object when the row
is created.
ICF router agents also allow a download of a config
file. Currently, the name of the config file on the
agent is '/config'.
An agent should reject an attempt to set this object
to a destination name that does not make sense for
this type of agent."
DEFVAL { "/os/primary" } -- public
::= { adAOSDownloadEntry 13 }
adAOSDownloadDestinationType OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2),
config(3),
remote(4),
other(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination of the download file.
The allowable destination names depend on the type
of agent being downloaded. In all cases, a
destination of 'primary(1)' or 'secondary(2)'
indicates that this is a download of the agent's
firmware image. The agent will use 'primary(1)'
as the default value for this object when the row
is created.
ICF router agents also allow a download of a config
file. Currently, the name of the config file on the
agent is 'config(3)'.
ICF router agents also allow a download of a
file to a remote server. A destination of 'remote(4)'
indicates that this is a download to a remote server.
An agent should reject an attempt to set this object
to a destination name that does not make sense for
this type of agent."
DEFVAL { 1 } -- public
::= { adAOSDownloadEntry 14 }
adAOSDownloadLogMaxSize OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of the download log entries
supported by this agent. Note that 0 is a
legal value for this variable."
::= { adAOSDownload 2 }
adAOSDownloadLogSize OBJECT-TYPE
SYNTAX Gauge32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of download log entries currently in
the adAOSDownloadLogTable."
::= { adAOSDownload 3 }
adAOSDownloadLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdAOSDownloadLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A log of the adAOSDownloadSize most recent
download attempts to this device. The first entry
in the table is the oldest."
::= { adAOSDownload 4 }
adAOSDownloadLogEntry OBJECT-TYPE
SYNTAX AdAOSDownloadLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the adAOSDownloadLogTable containing
information about a single download attempt."
INDEX { adAOSDlLogIndex }
::= { adAOSDownloadLogTable 1 }
AdAOSDownloadLogEntry ::=
SEQUENCE {
adAOSDlLogIndex Integer32,
adAOSDlLogOwnerAddress TAddress,
adAOSDlLogOwnerDomain TDomain,
adAOSDlLogTAddress TAddress,
adAOSDlLogTDomain TDomain,
adAOSDlLogFilename DisplayString,
adAOSDlLogResetType INTEGER,
adAOSDlLogErrorStatus INTEGER,
adAOSDlLogErrorText DisplayString
}
adAOSDlLogIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of this entry in the download log
table. Index 1 will always contain the oldest
entry. If the table is full when a download
attempt is made, the new entry becomes the last
entry (adAOSDownloadLogMaxSize), and all earlier
entries are shifted down by one entry, removing
the old index 1."
::= { adAOSDownloadLogEntry 1 }
adAOSDlLogOwnerAddress OBJECT-TYPE
SYNTAX TAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport address of the management station
that attempted to initiate a download of this
device, formatted according to the value of
adAOSDlLastOwnerDomain."
::= { adAOSDownloadLogEntry 2 }
adAOSDlLogOwnerDomain OBJECT-TYPE
SYNTAX TDomain
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The kind of transport service used by the
management station that attempted to initiate a
download of this device."
::= { adAOSDownloadLogEntry 3 }
adAOSDlLogTAddress OBJECT-TYPE
SYNTAX TAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport address of the node from which this
device attempted to download firmware, formatted
according to the value of adAOSDlLastTDomain."
::= { adAOSDownloadLogEntry 4 }
adAOSDlLogTDomain OBJECT-TYPE
SYNTAX TDomain
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The kind of transport service which was used for
the attempt to download firmware to this device."
::= { adAOSDownloadLogEntry 5 }
adAOSDlLogFilename OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The filename from which this device attempted to
download firmware."
::= { adAOSDownloadLogEntry 6 }
adAOSDlLogResetType OBJECT-TYPE
SYNTAX INTEGER {
noReset(1),
warmReset(2),
factoryReset(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of reset requested to be performed
after completion of the firmware download
attempt."
::= { adAOSDownloadLogEntry 7 }
adAOSDlLogErrorStatus OBJECT-TYPE
SYNTAX INTEGER {
fileNotFound(1),
accessViolation(2),
diskFull(3),
illegalOperation(4),
unknownTID(5),
fileExists(6),
noSuchUser(7),
notDefined(8),
corruptFile(9),
noServer(10),
tftpTimeout(11),
hardwareError(12),
success(13),
aborted(14)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the attempt to download firmware to
this device. The values are the same as the
corresponding values of adAOSDownloadErrorStatus."
::= { adAOSDownloadLogEntry 8 }
adAOSDlLogErrorText OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of the final error status
of the attempt to download firmware to this
device."
::= { adAOSDownloadLogEntry 9 }
-- conformance information
adAOSDownloadConformance
OBJECT IDENTIFIER ::= { adGenAOSConformance 3 }
adAOSDownloadCompliances
OBJECT IDENTIFIER ::= { adAOSDownloadConformance 1 }
adAOSDownloadGroups
OBJECT IDENTIFIER ::= { adAOSDownloadConformance 2 }
-- compliance statements
adAOSDownloadConfigCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"New version of the compliance statement for
network downloadable devices that allows
for monitoring in-progress downloads and for
directing a download to different destinations
on the device."
MODULE
MANDATORY-GROUPS { adAOSDownloadConfigGroup }
GROUP adAOSDownloadLogGroup
DESCRIPTION
"This group should be implemented by devices
that are able to keep log of network download
attempts."
::= { adAOSDownloadCompliances 1 }
-- units of conformance
adAOSDownloadLogGroup OBJECT-GROUP
OBJECTS { adAOSDlLogIndex,
adAOSDlLogOwnerAddress,
adAOSDlLogOwnerDomain,
adAOSDlLogTAddress,
adAOSDlLogTDomain,
adAOSDlLogFilename,
adAOSDlLogResetType,
adAOSDlLogErrorStatus,
adAOSDlLogErrorText
}
STATUS current
DESCRIPTION
"A collection of objects for maintaining a log of
network download attempts to ICF devices."
::= { adAOSDownloadGroups 1 }
adAOSDownloadConfigGroup OBJECT-GROUP
OBJECTS { adAOSDownloadIndex,
adAOSDownloadOwnerAddress,
adAOSDownloadOwnerDomain,
adAOSDownloadTAddress,
adAOSDownloadTDomain,
adAOSDownloadFilename,
adAOSDownloadResetType,
adAOSDownloadErrorStatus,
adAOSDownloadErrorText,
adAOSDownloadStatus,
adAOSDownloadPassesLeft,
adAOSDownloadOctetCount,
adAOSDownloadDestination,
adAOSDownloadLogMaxSize,
adAOSDownloadLogSize
}
STATUS current
DESCRIPTION
"A collection of objects for controlling and
monitoring network download of device firmware to
ICF devices."
::= { adAOSDownloadGroups 2 }
END