david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/adva/ADVA-FSPR7-DEF-MIB
David Leutgeb 98a672123c Initial commit
2023-12-05 12:25:34 +01:00

6593 lines
218 KiB
Plaintext
Raw Blame History

-- ***************************************************************************
-- ADVA-FSPR7-DEF-MIB.txt
--
-- ADVA AG Optical Networking Default MIB File
--
-- Copyright 2011 ADVA AG Optical Networking.
--
-- All rights reserved.
-- ***************************************************************************
-- MIB default definitions required for entity management.
ADVA-FSPR7-DEF-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
OBJECT-TYPE,
MODULE-IDENTITY,
Unsigned32,
Integer32,
IpAddress
FROM SNMPv2-SMI
RowStatus
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
fspR7,
ApsHoldoffTime,
ApsDirection,
EnableState,
EthDuplexMode,
FspR7EquipmentType,
LoopConfig,
OhTerminationLevel,
OtnPayloadType,
OtnTcmLevel,
ProtectionMech,
SonetTimingSource,
SonetTraceForm,
TimMode,
VirtualContainerType
FROM ADVA-MIB
ApsRevertMode,
ApsType,
CryptoFspR7EncryptionCommunication,
FfpType,
FspR7Acp,
FspR7APSCommand,
FspR7ApsFarEndModule,
FspR7AdminState,
FspR7AlsMode,
FspR7BERThreshold,
FspR7BidirectionalChannel,
FspR7Baund,
FspR7Bitrate,
FspR7CapInventory,
FspR7CdCompensationRange,
FspR7CdPostCompensationRange,
FspR7ChannelBandwidth,
FspR7ChannelIdentifier,
FspR7ChannelRangeInventory,
FspR7ChannelSpacing,
FspR7CodeGain,
FspR7Conn,
FspR7ConnectorType,
FspR7CpAuthType,
FspR7DCFiberType,
FspR7DeploymentScenario,
FspR7DhcpServer,
FspR7DisableEnable,
FspR7DispersionCompensation,
FspR7DispersionModes,
FspR7DmsrmtOperation,
FspR7EdfaOutputPowerRating,
FspR7EnableDisable,
FspR7ErrorFwdMode,
FspR7FecType,
FspR7FiberBrand,
FspR7FlowControlMode,
FspR7FrameFormat,
FspR7FunctionCrs,
FspR7Gain,
FspR7GainRange,
FspR7GccUsage,
FspR7InterfaceCrossover,
FspR7InterfaceType,
FspR7InvertTelemetryInputLogic,
FspR7IpType,
FspR7IPv6Type,
FspR7IpMode,
FspR7LacpMode,
FspR7LacpTimeout,
FspR7LagPortType,
FspR7LaneGroupInventory,
FspR7LaserDelayTimer,
FspR7Length,
FspR7LineCoding,
FspR7LLDPNeighbors,
FspR7LLDPScope,
FspR7ManualAuto,
FspR7Mapping,
FspR7MaxBitErrorRate,
FspR7MonLevel,
FspR7MuxMethod,
FspR7NoYes,
FspR7NumberOfChannels,
FspR7OpticalBand,
FspR7OpticalFiberType,
FspR7OpticalGroup,
FspR7OpticalInterfaceReach,
FspR7OpticalSubBand,
FspR7Optimize,
FspR7OpuPayloadType,
FspR7OscUsage,
FspR7OspfMode,
FspR7OtdrPeriod,
FspR7PathNode,
FspR7PlugDataRate,
FspR7PlugType,
FspR7PlugMode,
FspR7PmReset,
FspR7PortBehaviour,
FspR7PortMode,
FspR7PortRole,
FspR7ProtectionType,
FspR7PsuOutputPower,
FspR7RlsAction,
FspR7RoadmNumber,
FspR7RowStatus,
FspR7SingleFiberLocation,
FspR7SnmpHexString,
FspR7SnmpLongString,
FspR7SupplyType,
FspR7TelemetryOutput,
FspR7TerminationMode,
FspR7TiltSet,
FspR7TimDetMode,
FspR7Topology,
FspR7TrafficDirection,
FspR7TransmissionMode,
FspR7TxOffOnTm,
FspR7TypeConnection,
FspR7TypeCrs,
FspR7Unsigned32Caps,
FspR7UntaggedFrames,
FspR7VoaMode,
FspR7XfpDecisionThres,
FspR7YesNo
FROM ADVA-FSPR7-TC-MIB
entityConnectionClassName,
entityContainerShelfNo,
entityContainerSlotNo,
entityContainerPortNo,
entityContainerExtNo,
entityContainerClassName,
entityCrossConnFromShelfNo,
entityCrossConnFromSlotNo,
entityCrossConnFromPortNo,
entityCrossConnFromExtNo,
entityCrossConnFromClassName,
entityCrossConnToShelfNo,
entityCrossConnToSlotNo,
entityCrossConnToPortNo,
entityCrossConnToExtNo,
entityCrossConnToClassName,
entityCrossConnClassName,
entityCrsOptLineFromIndexNo1,
entityCrsOptLineFromIndexNo2,
entityCrsOptLineFromIndexNo3,
entityCrsOptLineFromIndexNo4,
entityCrsOptLineFromClassName,
entityCrsOptLineToIndexNo1,
entityCrsOptLineToIndexNo2,
entityCrsOptLineToIndexNo3,
entityCrsOptLineToIndexNo4,
entityCrsOptLineToClassName,
entityCrsOptLineClassName,
entityDcnShelfNo,
entityDcnSlotNo,
entityDcnPortNo,
entityDcnExtNo,
entityDcnClassName,
entityEqptShelfNo,
entityEqptSlotNo,
entityEqptPortNo,
entityEqptExtNo,
entityEqptClassName,
entityExternalPortShelfNo,
entityExternalPortSlotNo,
entityExternalPortPortNo,
entityExternalPortExtNo,
entityExternalPortClassName,
entityFacilityShelfNo,
entityFacilitySlotNo,
entityFacilityPortNo,
entityFacilityExtNo,
entityFacilityClassName,
entityOpticalMuxShelfNo,
entityOpticalMuxSlotNo,
entityOpticalMuxPortNo,
entityOpticalMuxExtNo,
entityOpticalMuxClassName,
entityOptLineIndexNo1,
entityOptLineClassName,
entityShelfConnShelfNo,
entityShelfConnSlotNo,
entityShelfConnPortNo,
entityShelfConnExtNo,
entityShelfConnClassName,
entityTerminPointIndexNo1,
entityTerminPointIndexNo2,
entityTerminPointIndexNo3,
entityTerminPointIndexNo4,
entityTerminPointClassName,
entityFfpShelfNo,
entityFfpSlotNo,
entityFfpPortNo,
entityFfpExtNo,
entityFfpClassName,
entityCrossDcnShelfNo,
entityCrossDcnSlotNo,
entityCrossDcnPortNo,
entityCrossDcnExtNo,
entityCrossDcnClassName
FROM ADVA-FSPR7-MIB;
advaFspR7Def MODULE-IDENTITY
LAST-UPDATED "201812140000Z"
ORGANIZATION "ADVA Optical Networking"
CONTACT-INFO "EMEA Support
Phone : +49 89 89 0665 848
Fax : +49 89 89 0665 22848
Email : support@advaoptical.com
North American Support
Phone : 886 442 ADVA (2382) (toll-free within the US, Canada and Mexico)
Fax : + 1 806 741 8529 (elsewhere)
Email : support-usa@advaoptical.com
Asia Pacific Support
Phone : + 1 866 442 2382 (other toll-free numbers available in some countries)
Email : support-asia@advaoptical.com"
DESCRIPTION "This is a MIB definition for ADVA AG Optical Networking entity management."
REVISION "201812140000Z"
DESCRIPTION "FSP3000 F7 Release 18.2.1 MIB."
REVISION "201810300000Z"
DESCRIPTION "FSP3000 F7 Release 18.1.2 MIB."
REVISION "201808090000Z"
DESCRIPTION "FSP3000 F7 Release 18.1.1 MIB."
REVISION "201805280000Z"
DESCRIPTION "FSP3000 F7 Release 17.2.2 MIB."
REVISION "201804170000Z"
DESCRIPTION "FSP3000 F7 Release 17.2.1 MIB."
REVISION "201803150000Z"
DESCRIPTION "FSP3000 F7 Release 17.1.2 MIB."
REVISION "201802260000Z"
DESCRIPTION "FSP3000 F7 Release 16.3.3 MIB."
REVISION "201712070000Z"
DESCRIPTION "FSP3000 F7 Release 17.1.1 MIB."
REVISION "201711010000Z"
DESCRIPTION "FSP3000 F7 Release 16.3.2 MIB."
REVISION "201709110000Z"
DESCRIPTION "FSP3000 F7 Release 16.3.1 MIB."
REVISION "201706060000Z"
DESCRIPTION "FSP3000 F7 Release 16.2.2 MIB."
REVISION "201703230000Z"
DESCRIPTION "FSP3000 F7 Release 16.2.1 MIB."
REVISION "201604010000Z"
DESCRIPTION "FSP3000 F7 Release 16.1.1 MIB."
REVISION "201512100000Z"
DESCRIPTION "FSP3000 F7 Release 15.2.1 MIB."
REVISION "201510010000Z"
DESCRIPTION "FSP3000 F7 Release 15.1.2 MIB."
REVISION "201509030000Z"
DESCRIPTION "FSP3000 F7 Release 15.1.1 MIB."
REVISION "201503200000Z"
DESCRIPTION "FSP3000 F7 Release 13.3.1 MIB."
REVISION "201410150000Z"
DESCRIPTION "FSP3000 F7 Release 13.2.2 MIB."
REVISION "201409290000Z"
DESCRIPTION "FSP3000 F7 Release 13.2.1 MIB."
REVISION "201312040000Z"
DESCRIPTION "FSP3000 F7 Release 12.2.1 MIB."
REVISION "201308200000Z"
DESCRIPTION "FSP3000 F7 Release 12.1.1 MIB."
REVISION "201105220000Z"
DESCRIPTION "FSP3000 F7 Release 11.2 MIB."
::= { fspR7 10 }
managementDef
OBJECT IDENTIFIER ::= { advaFspR7Def 3 }
specificMgmtDef
OBJECT IDENTIFIER ::= { managementDef 2 }
eqptMgmtDef
OBJECT IDENTIFIER ::= { managementDef 3 }
facilityMgmtDef
OBJECT IDENTIFIER ::= { managementDef 4 }
dcnMgmtDef
OBJECT IDENTIFIER ::= { managementDef 5 }
opticalMuxMgmtDef
OBJECT IDENTIFIER ::= { managementDef 6 }
shelfConnMgmtDef
OBJECT IDENTIFIER ::= { managementDef 7 }
envMgmtDef
OBJECT IDENTIFIER ::= { managementDef 8 }
containerMgmtDef
OBJECT IDENTIFIER ::= { managementDef 9 }
opticalLineMgmtDef
OBJECT IDENTIFIER ::= { managementDef 10 }
performanceDef
OBJECT IDENTIFIER ::= { advaFspR7Def 6 }
performanceFacilityDef
OBJECT IDENTIFIER ::= { performanceDef 4 }
performanceFacilityThresholdDef
OBJECT IDENTIFIER ::= { performanceFacilityDef 1 }
featureSpecificDef
OBJECT IDENTIFIER ::= { advaFspR7Def 7 }
fiberMapDef
OBJECT IDENTIFIER ::= { featureSpecificDef 1 }
eciDef
OBJECT IDENTIFIER ::= { featureSpecificDef 3 }
changeServiceDef
OBJECT IDENTIFIER ::= { featureSpecificDef 5 }
protectionDef
OBJECT IDENTIFIER ::= { featureSpecificDef 6 }
crossConnectionDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF CrossConnectionDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "crossConnectionDefTable"
::= { specificMgmtDef 6 }
crossConnectionDefEntry OBJECT-TYPE
SYNTAX CrossConnectionDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of crossConnectionDefTable"
INDEX {
entityCrossConnFromShelfNo,
entityCrossConnFromSlotNo,
entityCrossConnFromPortNo,
entityCrossConnFromExtNo,
entityCrossConnFromClassName,
entityCrossConnToShelfNo,
entityCrossConnToSlotNo,
entityCrossConnToPortNo,
entityCrossConnToExtNo,
entityCrossConnToClassName,
entityCrossConnClassName
}
::= { crossConnectionDefTable 1 }
CrossConnectionDefEntry ::= SEQUENCE
{ crossConnectionDefRowStatus FspR7RowStatus,
crossConnectionDefAdmin FspR7AdminState,
crossConnectionDefRedLineState FspR7YesNo,
crossConnectionDefConn FspR7Conn,
crossConnectionDefAlias SnmpAdminString,
crossConnectionDefPathNode FspR7PathNode,
crossConnectionDefTunnelAid SnmpAdminString,
crossConnectionDefType FspR7InterfaceType,
crossConnectionDefCrsFunction FspR7FunctionCrs }
crossConnectionDefRowStatus OBJECT-TYPE
SYNTAX FspR7RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Cross Connection Default RowStatus."
::= { crossConnectionDefEntry 1 }
crossConnectionDefAdmin OBJECT-TYPE
SYNTAX FspR7AdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Cross Connection Default Adminstrative State."
::= { crossConnectionDefEntry 2 }
crossConnectionDefRedLineState OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Cross Connection Default Red Lined State."
::= { crossConnectionDefEntry 3 }
crossConnectionDefConn OBJECT-TYPE
SYNTAX FspR7Conn
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Cross Connection Default Direction."
::= { crossConnectionDefEntry 4 }
crossConnectionDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Cross Connection Default Alias."
::= { crossConnectionDefEntry 5 }
crossConnectionDefPathNode OBJECT-TYPE
SYNTAX FspR7PathNode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Cross Connection Default Path Node."
::= { crossConnectionDefEntry 6 }
crossConnectionDefTunnelAid OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Cross Connection Default Tunnel AID."
::= { crossConnectionDefEntry 7 }
crossConnectionDefType OBJECT-TYPE
SYNTAX FspR7InterfaceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Cross Connection Default Type Facility."
::= { crossConnectionDefEntry 8 }
crossConnectionDefCrsFunction OBJECT-TYPE
SYNTAX FspR7FunctionCrs
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes the Cross Connect Functionality"
::= { crossConnectionDefEntry 9 }
crossOpticalLineDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF CrossOpticalLineDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "crossOpticalLineDefTable"
::= { specificMgmtDef 7 }
crossOpticalLineDefEntry OBJECT-TYPE
SYNTAX CrossOpticalLineDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of crossOpticalLineDefTable"
INDEX {
entityCrsOptLineFromIndexNo1,
entityCrsOptLineFromIndexNo2,
entityCrsOptLineFromIndexNo3,
entityCrsOptLineFromIndexNo4,
entityCrsOptLineFromClassName,
entityCrsOptLineToIndexNo1,
entityCrsOptLineToIndexNo2,
entityCrsOptLineToIndexNo3,
entityCrsOptLineToIndexNo4,
entityCrsOptLineToClassName,
entityCrsOptLineClassName
}
::= { crossOpticalLineDefTable 1 }
CrossOpticalLineDefEntry ::= SEQUENCE
{ crossOpticalLineDefRowStatus FspR7RowStatus,
crossOpticalLineDefRedLineState FspR7YesNo,
crossOpticalLineDefConn FspR7Conn,
crossOpticalLineDefCrsType FspR7TypeCrs,
crossOpticalLineDefAlias SnmpAdminString,
crossOpticalLineDefTunnelAid SnmpAdminString }
crossOpticalLineDefRowStatus OBJECT-TYPE
SYNTAX FspR7RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Cross Connection Default RowStatus."
::= { crossOpticalLineDefEntry 1 }
crossOpticalLineDefRedLineState OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Cross Optical Line Default Red Lined State."
::= { crossOpticalLineDefEntry 2 }
crossOpticalLineDefConn OBJECT-TYPE
SYNTAX FspR7Conn
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Cross Optical Line Default Direction."
::= { crossOpticalLineDefEntry 3 }
crossOpticalLineDefCrsType OBJECT-TYPE
SYNTAX FspR7TypeCrs
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Cross Optical Line Default Type."
::= { crossOpticalLineDefEntry 4 }
crossOpticalLineDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Cross Optical Line Default Alias."
::= { crossOpticalLineDefEntry 5 }
crossOpticalLineDefTunnelAid OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Cross Optical Line Default Tunnel AID."
::= { crossOpticalLineDefEntry 6 }
endOfCrossOpticalLineDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { specificMgmtDef 8 }
crossDcnDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF CrossDcnDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "crossDcnDefTable"
::= { specificMgmtDef 9 }
crossDcnDefEntry OBJECT-TYPE
SYNTAX CrossDcnDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of crossDcnDefTable"
INDEX {
entityCrossDcnShelfNo,
entityCrossDcnSlotNo,
entityCrossDcnPortNo,
entityCrossDcnExtNo,
entityCrossDcnClassName
}
::= { crossDcnDefTable 1 }
CrossDcnDefEntry ::= SEQUENCE
{ crossDcnDefRowStatus RowStatus,
crossDcnDefType FspR7TypeConnection,
crossDcnDefLink SnmpAdminString,
crossDcnDefEcc SnmpAdminString }
crossDcnDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus object is used to create or delete a row in the table."
::= { crossDcnDefEntry 1 }
crossDcnDefType OBJECT-TYPE
SYNTAX FspR7TypeConnection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of Cross-Connect"
::= { crossDcnDefEntry 2 }
crossDcnDefLink OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Address Identifier of PPPIP LINK Entity."
::= { crossDcnDefEntry 3 }
crossDcnDefEcc OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Address Identifier of ECC Entity."
::= { crossDcnDefEntry 4 }
endOfCrossDcnDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { specificMgmtDef 10 }
endOfSpecificMgmtDef OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { specificMgmtDef 10000 }
shelfDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF ShelfDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "shelfCapTable"
::= { eqptMgmtDef 1 }
shelfDefEntry OBJECT-TYPE
SYNTAX ShelfDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of shelfCapTable"
INDEX {
entityEqptShelfNo,
entityEqptSlotNo,
entityEqptPortNo,
entityEqptExtNo,
entityEqptClassName
}
::= { shelfDefTable 1 }
ShelfDefEntry ::= SEQUENCE
{ shelfDefRowStatus RowStatus,
shelfDefPsuOutputPower FspR7PsuOutputPower,
shelfDefType FspR7EquipmentType,
shelfDefRack SnmpAdminString,
shelfDefSupply FspR7SupplyType,
shelfDefBandProvision FspR7OpticalBand,
shelfDefAdmin FspR7AdminState,
shelfDefRackNumber Unsigned32,
shelfDefRackOrder Unsigned32,
shelfDefAlias SnmpAdminString,
shelfDefSlot Unsigned32,
shelfDefPowerSupplyProtection FspR7EnableDisable,
shelfDefAirFilterClear FspR7RlsAction,
shelfDefAirFilterCycle Unsigned32 }
shelfDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus object is used to create or delete a row in the table."
::= { shelfDefEntry 1 }
shelfDefPsuOutputPower OBJECT-TYPE
SYNTAX FspR7PsuOutputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum PSU Output Power"
::= { shelfDefEntry 2 }
shelfDefType OBJECT-TYPE
SYNTAX FspR7EquipmentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The TYPE of Equipment and the MODE setting determine uniquely
the number and allowed TYPE's of the provisionable dependent
entities (plugs, interfaces, modules)"
::= { shelfDefEntry 3 }
shelfDefRack OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Rack Containing Shelf"
::= { shelfDefEntry 4 }
shelfDefSupply OBJECT-TYPE
SYNTAX FspR7SupplyType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The kind of power supply - provisioned value"
::= { shelfDefEntry 5 }
shelfDefBandProvision OBJECT-TYPE
SYNTAX FspR7OpticalBand
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Band Provision. Reference to BAND__INVENTORY."
::= { shelfDefEntry 6 }
shelfDefAdmin OBJECT-TYPE
SYNTAX FspR7AdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted."
::= { shelfDefEntry 7 }
shelfDefRackNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of the Rack"
::= { shelfDefEntry 8 }
shelfDefRackOrder OBJECT-TYPE
SYNTAX Unsigned32 (0..45)
UNITS "HU"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Defines the position of the shelf in a rack, starting from the top or bottom for the rack depending on Shelf Order (COUNT__ORDER). Shelf Position is used with Shelf Order for the graphical rack view."
::= { shelfDefEntry 9 }
shelfDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User Applied Descriptor"
::= { shelfDefEntry 10 }
shelfDefSlot OBJECT-TYPE
SYNTAX Unsigned32 (0..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Slot Position"
::= { shelfDefEntry 11 }
shelfDefPowerSupplyProtection OBJECT-TYPE
SYNTAX FspR7EnableDisable
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Power Supply Redundancy Configuration"
::= { shelfDefEntry 12 }
shelfDefAirFilterClear OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operation to clear air filter replace condition and reset replacement count"
::= { shelfDefEntry 13 }
shelfDefAirFilterCycle OBJECT-TYPE
SYNTAX Unsigned32 (0..24)
UNITS "month"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sets the replacement duration for the air filter replace time setting in months; a setting of 0 prevents the replacement warning alram from being raised"
::= { shelfDefEntry 14 }
endOfShelfDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { eqptMgmtDef 2 }
fanDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF FanDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "fanCapTable"
::= { eqptMgmtDef 3 }
fanDefEntry OBJECT-TYPE
SYNTAX FanDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of fanCapTable"
INDEX {
entityEqptShelfNo,
entityEqptSlotNo,
entityEqptPortNo,
entityEqptExtNo,
entityEqptClassName
}
::= { fanDefTable 1 }
FanDefEntry ::= SEQUENCE
{ fanDefRowStatus RowStatus,
fanDefAdmin FspR7AdminState,
fanDefType FspR7EquipmentType,
fanDefAlias SnmpAdminString,
fanDefOutputReset FspR7RlsAction }
fanDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus object is used to create or delete a row in the table."
::= { fanDefEntry 1 }
fanDefAdmin OBJECT-TYPE
SYNTAX FspR7AdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted."
::= { fanDefEntry 2 }
fanDefType OBJECT-TYPE
SYNTAX FspR7EquipmentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The TYPE of Equipment and the MODE setting determine uniquely
the number and allowed TYPE's of the provisionable dependent
entities (plugs, interfaces, modules)"
::= { fanDefEntry 3 }
fanDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User Applied Descriptor"
::= { fanDefEntry 4 }
fanDefOutputReset OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Has the same function as the HW switch at the UTM board"
::= { fanDefEntry 5 }
endOfFanDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { eqptMgmtDef 4 }
plugDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF PlugDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "plugCapTable"
::= { eqptMgmtDef 5 }
plugDefEntry OBJECT-TYPE
SYNTAX PlugDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of plugCapTable"
INDEX {
entityEqptShelfNo,
entityEqptSlotNo,
entityEqptPortNo,
entityEqptExtNo,
entityEqptClassName
}
::= { plugDefTable 1 }
PlugDefEntry ::= SEQUENCE
{ plugDefRowStatus RowStatus,
plugDefConnector FspR7ConnectorType,
plugDefType FspR7EquipmentType,
plugDefReach FspR7OpticalInterfaceReach,
plugDefLoopbackAttenuation Unsigned32,
plugDefTransmitChannel FspR7ChannelIdentifier,
plugDefAlias SnmpAdminString,
plugDefLaneGroup FspR7LaneGroupInventory,
plugDefMaxDataRate FspR7PlugDataRate,
plugDefThirdPartyUsage EnableState,
plugDefAdmin FspR7AdminState,
plugDefBidirectionalChannel FspR7BidirectionalChannel,
plugDefChannelSpacingProvision FspR7ChannelSpacing,
plugDefLength FspR7Length,
plugDefPlugType FspR7PlugType,
plugDefPlugMode FspR7PlugMode }
plugDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus object is used to create or delete a row in the table."
::= { plugDefEntry 1 }
plugDefConnector OBJECT-TYPE
SYNTAX FspR7ConnectorType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Connector"
::= { plugDefEntry 2 }
plugDefType OBJECT-TYPE
SYNTAX FspR7EquipmentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The TYPE of Equipment and the MODE setting determine uniquely
the number and allowed TYPE's of the provisionable dependent
entities (plugs, interfaces, modules)"
::= { plugDefEntry 3 }
plugDefReach OBJECT-TYPE
SYNTAX FspR7OpticalInterfaceReach
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reach"
::= { plugDefEntry 4 }
plugDefLoopbackAttenuation OBJECT-TYPE
SYNTAX Unsigned32 (10..300)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loop back attenuation used for Optojack SE plugs"
::= { plugDefEntry 5 }
plugDefTransmitChannel OBJECT-TYPE
SYNTAX FspR7ChannelIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Channel"
::= { plugDefEntry 6 }
plugDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User Applied Descriptor"
::= { plugDefEntry 7 }
plugDefLaneGroup OBJECT-TYPE
SYNTAX FspR7LaneGroupInventory
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Lane group to provision"
::= { plugDefEntry 8 }
plugDefMaxDataRate OBJECT-TYPE
SYNTAX FspR7PlugDataRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Rate"
::= { plugDefEntry 9 }
plugDefThirdPartyUsage OBJECT-TYPE
SYNTAX EnableState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Usage of 3rd Party Plugs"
::= { plugDefEntry 10 }
plugDefAdmin OBJECT-TYPE
SYNTAX FspR7AdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted."
::= { plugDefEntry 11 }
plugDefBidirectionalChannel OBJECT-TYPE
SYNTAX FspR7BidirectionalChannel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bidirectional Channel Rates from Provisioning"
::= { plugDefEntry 12 }
plugDefChannelSpacingProvision OBJECT-TYPE
SYNTAX FspR7ChannelSpacing
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Channel Space Provision, reference to CHA-SPC__INVENTORY"
::= { plugDefEntry 13 }
plugDefLength OBJECT-TYPE
SYNTAX FspR7Length
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Length"
::= { plugDefEntry 14 }
plugDefPlugType OBJECT-TYPE
SYNTAX FspR7PlugType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Plug Type"
::= { plugDefEntry 15 }
plugDefPlugMode OBJECT-TYPE
SYNTAX FspR7PlugMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Plug Mode"
::= { plugDefEntry 16 }
endOfPlugDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { eqptMgmtDef 6 }
moduleDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF ModuleDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "moduleCapTable"
::= { eqptMgmtDef 7 }
moduleDefEntry OBJECT-TYPE
SYNTAX ModuleDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of moduleCapTable"
INDEX {
entityEqptShelfNo,
entityEqptSlotNo,
entityEqptPortNo,
entityEqptExtNo,
entityEqptClassName
}
::= { moduleDefTable 1 }
ModuleDefEntry ::= SEQUENCE
{ moduleDefRowStatus RowStatus,
moduleDefPsuOutputPower FspR7PsuOutputPower,
moduleDefPower FspR7EdfaOutputPowerRating,
moduleDefReach FspR7OpticalInterfaceReach,
moduleDefInitEqlz FspR7RlsAction,
moduleDefLanAid SnmpAdminString,
moduleDefType FspR7EquipmentType,
moduleDefMapping FspR7Mapping,
moduleDefGainRange FspR7GainRange,
moduleDefSfProvision FspR7SingleFiberLocation,
moduleDefCapabilityLevelProvision FspR7CapInventory,
moduleDefDCFiberType FspR7DCFiberType,
moduleDefChannelsProvision FspR7NumberOfChannels,
moduleDefFiberDetect FspR7EnableDisable,
moduleDefSupply FspR7SupplyType,
moduleDefGroup FspR7OpticalGroup,
moduleDefDeploy FspR7DeploymentScenario,
moduleDefLagSysPrio Unsigned32,
moduleDefTransmitChannel FspR7ChannelIdentifier,
moduleDefBand FspR7OpticalBand,
moduleDefTrafficDirection FspR7TrafficDirection,
moduleDefIpAddr IpAddress,
moduleDefDispersionCompensation FspR7DispersionCompensation,
moduleDefActivateDetect FspR7YesNo,
moduleDefOscUsage FspR7OscUsage,
moduleDefAdmin FspR7AdminState,
moduleDefScrambling FspR7EnableDisable,
moduleDefChannelsNumber FspR7NumberOfChannels,
moduleDefChannelSpacingProvision FspR7ChannelSpacing,
moduleDefMode FspR7TransmissionMode,
moduleDefSubBandProvision FspR7OpticalSubBand,
moduleDefAlias SnmpAdminString,
moduleDefFiberType FspR7OpticalFiberType,
moduleDefChannelSpacing FspR7ChannelSpacing,
moduleDefOutputReset FspR7RlsAction,
moduleDefRoadmNumber FspR7RoadmNumber,
moduleDefTopology FspR7Topology,
moduleDefForceConfig FspR7RlsAction,
moduleDefMuxMethod FspR7MuxMethod,
moduleDefNdpCleanup FspR7RlsAction,
moduleDefRstp FspR7EnableDisable,
moduleDefRemoteReset FspR7RlsAction,
moduleDefPartner1 SnmpAdminString,
moduleDefPartner2 SnmpAdminString,
moduleDefPartner3 SnmpAdminString,
moduleDefPartner4 SnmpAdminString,
moduleDefAcp FspR7Acp }
moduleDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus object is used to create or delete a row in the table."
::= { moduleDefEntry 1 }
moduleDefPsuOutputPower OBJECT-TYPE
SYNTAX FspR7PsuOutputPower
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum PSU Output Power"
::= { moduleDefEntry 2 }
moduleDefPower OBJECT-TYPE
SYNTAX FspR7EdfaOutputPowerRating
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Optical Output Power Rating - Provision"
::= { moduleDefEntry 3 }
moduleDefReach OBJECT-TYPE
SYNTAX FspR7OpticalInterfaceReach
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reach"
::= { moduleDefEntry 4 }
moduleDefInitEqlz OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Initiate Equalization"
::= { moduleDefEntry 5 }
moduleDefLanAid OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "AID of LAN"
::= { moduleDefEntry 6 }
moduleDefType OBJECT-TYPE
SYNTAX FspR7EquipmentType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The TYPE of Equipment and the MODE setting determine uniquely
the number and allowed TYPE's of the provisionable dependent
entities (plugs, interfaces, modules)"
::= { moduleDefEntry 7 }
moduleDefMapping OBJECT-TYPE
SYNTAX FspR7Mapping
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of mapping; transparent or framing"
::= { moduleDefEntry 8 }
moduleDefGainRange OBJECT-TYPE
SYNTAX FspR7GainRange
MAX-ACCESS read-only
STATUS current
DESCRIPTION "EDFA gain range to provision"
::= { moduleDefEntry 9 }
moduleDefSfProvision OBJECT-TYPE
SYNTAX FspR7SingleFiberLocation
MAX-ACCESS read-only
STATUS current
DESCRIPTION "determines the location (A or B) for Single Fiber applications"
::= { moduleDefEntry 10 }
moduleDefCapabilityLevelProvision OBJECT-TYPE
SYNTAX FspR7CapInventory
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Capability level provisioned"
::= { moduleDefEntry 11 }
moduleDefDCFiberType OBJECT-TYPE
SYNTAX FspR7DCFiberType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Dispersion Compensation Fibertype"
::= { moduleDefEntry 12 }
moduleDefChannelsProvision OBJECT-TYPE
SYNTAX FspR7NumberOfChannels
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of channels supported by an entity"
::= { moduleDefEntry 13 }
moduleDefFiberDetect OBJECT-TYPE
SYNTAX FspR7EnableDisable
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Fiber Detect"
::= { moduleDefEntry 14 }
moduleDefSupply OBJECT-TYPE
SYNTAX FspR7SupplyType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The kind of power supply - provisioned value"
::= { moduleDefEntry 15 }
moduleDefGroup OBJECT-TYPE
SYNTAX FspR7OpticalGroup
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Group of 4 DWDM channels or the Group of 4 CWDM channels"
::= { moduleDefEntry 16 }
moduleDefDeploy OBJECT-TYPE
SYNTAX FspR7DeploymentScenario
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes how the card is applied related to a network scenario"
::= { moduleDefEntry 17 }
moduleDefLagSysPrio OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Link Aggregation Group Actor System Priority Part of LAG ID"
::= { moduleDefEntry 18 }
moduleDefTransmitChannel OBJECT-TYPE
SYNTAX FspR7ChannelIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Channel"
::= { moduleDefEntry 19 }
moduleDefBand OBJECT-TYPE
SYNTAX FspR7OpticalBand
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The optical band of the module."
::= { moduleDefEntry 20 }
moduleDefTrafficDirection OBJECT-TYPE
SYNTAX FspR7TrafficDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Traffic Direction"
::= { moduleDefEntry 21 }
moduleDefIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP Address assigned to LAN IP Interface"
::= { moduleDefEntry 22 }
moduleDefDispersionCompensation OBJECT-TYPE
SYNTAX FspR7DispersionCompensation
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Dispersion Compensation Value in km of SSMF fiber"
::= { moduleDefEntry 23 }
moduleDefActivateDetect OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Initialize Topology Detection"
::= { moduleDefEntry 24 }
moduleDefOscUsage OBJECT-TYPE
SYNTAX FspR7OscUsage
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Select if and how the OSC is to be used on an amplifier"
::= { moduleDefEntry 25 }
moduleDefAdmin OBJECT-TYPE
SYNTAX FspR7AdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted."
::= { moduleDefEntry 26 }
moduleDefScrambling OBJECT-TYPE
SYNTAX FspR7EnableDisable
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Configuration of scrambling functionality for Virtual Facilities"
::= { moduleDefEntry 27 }
moduleDefChannelsNumber OBJECT-TYPE
SYNTAX FspR7NumberOfChannels
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of channels supported by an entity"
::= { moduleDefEntry 28 }
moduleDefChannelSpacingProvision OBJECT-TYPE
SYNTAX FspR7ChannelSpacing
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Channel Space Provision, reference to CHA-SPC__INVENTORY"
::= { moduleDefEntry 29 }
moduleDefMode OBJECT-TYPE
SYNTAX FspR7TransmissionMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mode of the module, determine operation or functionality"
::= { moduleDefEntry 30 }
moduleDefSubBandProvision OBJECT-TYPE
SYNTAX FspR7OpticalSubBand
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Subband - Provision"
::= { moduleDefEntry 31 }
moduleDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User Applied Descriptor"
::= { moduleDefEntry 32 }
moduleDefFiberType OBJECT-TYPE
SYNTAX FspR7OpticalFiberType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Fiber of Optical Interface - Provision, Reference to FIBER__INVENTORY"
::= { moduleDefEntry 33 }
moduleDefChannelSpacing OBJECT-TYPE
SYNTAX FspR7ChannelSpacing
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ITU Grid channel spacing"
::= { moduleDefEntry 34 }
moduleDefOutputReset OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Has the same function as the HW switch at the UTM board"
::= { moduleDefEntry 35 }
moduleDefRoadmNumber OBJECT-TYPE
SYNTAX FspR7RoadmNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number for ROADM module typically associated with a Network Fiber or Degree"
::= { moduleDefEntry 36 }
moduleDefTopology OBJECT-TYPE
SYNTAX FspR7Topology
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows the card topology in the NE"
::= { moduleDefEntry 37 }
moduleDefForceConfig OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Force cserver to send down configuration to module"
::= { moduleDefEntry 38 }
moduleDefMuxMethod OBJECT-TYPE
SYNTAX FspR7MuxMethod
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Selection of mux method"
::= { moduleDefEntry 39 }
moduleDefNdpCleanup OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Cleanup Network Data Path allocation"
::= { moduleDefEntry 40 }
moduleDefRstp OBJECT-TYPE
SYNTAX FspR7EnableDisable
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Rapid spanning tree protocol"
::= { moduleDefEntry 41 }
moduleDefRemoteReset OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remote reset of module. This parameter will be available only on SH9HU and SH1HUPF shelves."
::= { moduleDefEntry 42 }
moduleDefPartner1 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "External Protection Trigger Entity AID #1"
::= { moduleDefEntry 43 }
moduleDefPartner2 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "External Protection Trigger Entity AID #2"
::= { moduleDefEntry 44 }
moduleDefPartner3 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "External Protection Trigger Entity AID #3"
::= { moduleDefEntry 45 }
moduleDefPartner4 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "External Protection Trigger Entity AID #4"
::= { moduleDefEntry 46 }
moduleDefAcp OBJECT-TYPE
SYNTAX FspR7Acp
MAX-ACCESS read-create
STATUS current
DESCRIPTION "APS communication partner"
::= { moduleDefEntry 47 }
endOfModuleDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { eqptMgmtDef 8 }
endOfEqptMgmtDef OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { eqptMgmtDef 10000 }
physicalPortDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhysicalPortDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "physicalPortDefTable"
::= { facilityMgmtDef 1 }
physicalPortDefEntry OBJECT-TYPE
SYNTAX PhysicalPortDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of physicalPortDefTable"
INDEX {
entityFacilityShelfNo,
entityFacilitySlotNo,
entityFacilityPortNo,
entityFacilityExtNo,
entityFacilityClassName
}
::= { physicalPortDefTable 1 }
PhysicalPortDefEntry ::= SEQUENCE
{ physicalPortDefRowStatus RowStatus,
physicalPortDefType FspR7InterfaceType,
physicalPortDefAdmin FspR7AdminState,
physicalPortDefAlias SnmpAdminString,
physicalPortDefAlsMode FspR7AlsMode,
physicalPortDefAutoThresReset FspR7RlsAction,
physicalPortDefAutonegotiation EnableState,
physicalPortDefBehaviour FspR7PortBehaviour,
physicalPortDefDispertionConfig FspR7RlsAction,
physicalPortDefDispersionSetting Integer32,
physicalPortDefDispersionMode FspR7DispersionModes,
physicalPortDefChannelProv FspR7ChannelIdentifier,
physicalPortDefWdmRxChannel FspR7ChannelIdentifier,
physicalPortDefCodeGain FspR7CodeGain,
physicalPortDefXfpDecisionThres FspR7XfpDecisionThres,
physicalPortDefDisparityCorrection EnableState,
physicalPortDefEqlzAdmin FspR7EnableDisable,
physicalPortDefErrorForwarding FspR7ErrorFwdMode,
physicalPortDefFecType FspR7FecType,
physicalPortDefFarEndCommunication FspR7YesNo,
physicalPortDefFlowControl FspR7FlowControlMode,
physicalPortDefForceLaserOn FspR7RlsAction,
physicalPortDefInhibitSwitchToProt FspR7YesNo,
physicalPortDefInhibitSwitchToWork FspR7YesNo,
physicalPortDefLaneChannelSetting FspR7ChannelIdentifier,
physicalPortDefLoopConfig LoopConfig,
physicalPortDefLaserDelayTimer FspR7LaserDelayTimer,
physicalPortDefLaserOffTimer Unsigned32,
physicalPortDefLaserOnTimer Unsigned32,
physicalPortDefLaserOffDelayFunction EnableState,
physicalPortDefAutoPTassignment FspR7ManualAuto,
physicalPortDefTributarySlotMethod FspR7ManualAuto,
physicalPortDefInitiateEqualization FspR7RlsAction,
physicalPortDefLossAttenuation FspR7RlsAction,
physicalPortDefOpticalSetPoint Integer32,
physicalPortDefDataLayerPmReset FspR7PmReset,
physicalPortDefPrbsPmReset FspR7PmReset,
physicalPortDefTestPrbsRcvMode FspR7RlsAction,
physicalPortDefTestPrbsTrmtMode FspR7RlsAction,
physicalPortDefSwitchCommand FspR7APSCommand,
physicalPortDefOpuPayloadType FspR7OpuPayloadType,
physicalPortDefSigDegThresSonetLine FspR7BERThreshold,
physicalPortDefSigDegThresSdhMs Unsigned32,
physicalPortDefSigDegThresOtu Integer32,
physicalPortDefSigDegThresOdu Integer32,
physicalPortDefSigDegThreshold Unsigned32,
physicalPortDefSigDegPcslThreshold Unsigned32,
physicalPortDefSigDegThresSonetSection FspR7BERThreshold,
physicalPortDefSigDegThresSdhSection Unsigned32,
physicalPortDefSigDegThresOduTcmA Integer32,
physicalPortDefSigDegThresOduTcmB Integer32,
physicalPortDefSigDegThresOduTcmC Integer32,
physicalPortDefSignalDegradePeriod Unsigned32,
physicalPortDefSigDegPeriodOdu Unsigned32,
physicalPortDefSigDegPeriodOtu Unsigned32,
physicalPortDefSigDegPeriodIntegration Unsigned32,
physicalPortDefSigDegPeriodSdhSection Unsigned32,
physicalPortDefSigDegPeriodOduTcmA Unsigned32,
physicalPortDefSigDegPeriodOduTcmB Unsigned32,
physicalPortDefSigDegPeriodOduTcmC Unsigned32,
physicalPortDefOtnStuffing FspR7YesNo,
physicalPortDefTcmALevel OtnTcmLevel,
physicalPortDefTcmBLevel OtnTcmLevel,
physicalPortDefTcmCLevel OtnTcmLevel,
physicalPortDefTerminationLevel OhTerminationLevel,
physicalPortDefTimingSource SonetTimingSource,
physicalPortDefTimModeOdu TimMode,
physicalPortDefTimModeOtu TimMode,
physicalPortDefTimModeSonetSection TimMode,
physicalPortDefTimModeOduTcmA TimMode,
physicalPortDefTimModeOduTcmB TimMode,
physicalPortDefTimModeOduTcmC TimMode,
physicalPortDefTraceFormSonetSection SonetTraceForm,
physicalPortDefTraceExpectedSonetSection OCTET STRING,
physicalPortDefTraceTransmitSonetSection OCTET STRING,
physicalPortDefTraceExpectedOtu OCTET STRING,
physicalPortDefTraceTransmitSapiOtu OCTET STRING,
physicalPortDefTraceTransmitDapiOtu OCTET STRING,
physicalPortDefTraceTransmitOpspOtu OCTET STRING,
physicalPortDefTraceExpectedOdu OCTET STRING,
physicalPortDefTraceTransmitSapiOdu OCTET STRING,
physicalPortDefTraceTransmitDapiOdu OCTET STRING,
physicalPortDefTraceTransmitOpspOdu OCTET STRING,
physicalPortDefTraceExpectedOduTcmA OCTET STRING,
physicalPortDefTraceTransmitSapiOduTcmA OCTET STRING,
physicalPortDefTraceTransmitDapiOduTcmA OCTET STRING,
physicalPortDefTraceTransmitOpspOduTcmA OCTET STRING,
physicalPortDefTraceExpectedOduTcmB OCTET STRING,
physicalPortDefTraceTransmitSapiOduTcmB OCTET STRING,
physicalPortDefTraceTransmitDapiOduTcmB OCTET STRING,
physicalPortDefTraceTransmitOpspOduTcmB OCTET STRING,
physicalPortDefTraceExpectedOduTcmC OCTET STRING,
physicalPortDefTraceTransmitSapiOduTcmC OCTET STRING,
physicalPortDefTraceTransmitDapiOduTcmC OCTET STRING,
physicalPortDefTraceTransmitOpspOduTcmC OCTET STRING,
physicalPortDefTurnupConfig FspR7RlsAction,
physicalPortDefTxOffDelay FspR7EnableDisable,
physicalPortDefVoaMode FspR7VoaMode,
physicalPortDefVoaSetpoint Unsigned32,
physicalPortDefLagPrio Unsigned32,
physicalPortDefMaxFrameSize Unsigned32,
physicalPortDefPayload OtnPayloadType,
physicalPortDefPortMode FspR7PortMode,
physicalPortDefPortRole FspR7PortRole,
physicalPortDefPriority Unsigned32,
physicalPortDefPvid Unsigned32,
physicalPortDefStagType FspR7SnmpHexString,
physicalPortDefUtag FspR7UntaggedFrames,
physicalPortDefVethAid SnmpAdminString,
physicalPortDefRedLineState FspR7YesNo,
physicalPortDefTunnelAid SnmpAdminString,
physicalPortDefRateLimit FspR7DisableEnable,
physicalPortDefTxOffOnTm FspR7TxOffOnTm,
physicalPortDefTxOffTimer Unsigned32,
physicalPortDefTxOnTimer Unsigned32,
physicalPortDefMode FspR7TransmissionMode,
physicalPortDefMonLevel FspR7MonLevel,
physicalPortDefChannelPlan FspR7ChannelRangeInventory,
physicalPortDefOptimize FspR7Optimize,
physicalPortDefEncryptionChannel CryptoFspR7EncryptionCommunication,
physicalPortDefLinkSetup FspR7DisableEnable,
physicalPortDefCdCompensationRange FspR7CdCompensationRange,
physicalPortDefChannelSpacing FspR7ChannelSpacing,
physicalPortDefLLDPNeighborsRx FspR7LLDPNeighbors,
physicalPortDefLLDPNeighborsTx FspR7LLDPNeighbors,
physicalPortDefCdPostCompensationRange FspR7CdPostCompensationRange,
physicalPortDefLaneChannel1 FspR7ChannelIdentifier,
physicalPortDefLaneChannel2 FspR7ChannelIdentifier,
physicalPortDefOpticalSetPointLane1 Integer32,
physicalPortDefOpticalSetPointLane2 Integer32,
physicalPortDefTerminationMode FspR7TerminationMode,
physicalPortDefTimDetModeOtu FspR7TimDetMode,
physicalPortDefTimActionOtu FspR7YesNo,
physicalPortDefTraceExpectedDapiOtu SnmpAdminString,
physicalPortDefTraceExpectedOpspOtu SnmpAdminString,
physicalPortDefTimDetModeOdu FspR7TimDetMode,
physicalPortDefTimActionOdu FspR7YesNo,
physicalPortDefTraceExpectedDapiOdu SnmpAdminString,
physicalPortDefTraceExpectedOpspOdu SnmpAdminString,
physicalPortDefReportAisLine FspR7YesNo,
physicalPortDefReportSsfLine FspR7YesNo,
physicalPortDefReportSsfSection FspR7YesNo,
physicalPortDefDelayMeasurementOperation FspR7DmsrmtOperation }
physicalPortDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Physical Port Capability RowStatus."
::= { physicalPortDefEntry 1 }
physicalPortDefType OBJECT-TYPE
SYNTAX FspR7InterfaceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Physical Port Capability Facility Type."
::= { physicalPortDefEntry 2 }
physicalPortDefAdmin OBJECT-TYPE
SYNTAX FspR7AdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Physical Port Capability Adminstrative State."
::= { physicalPortDefEntry 3 }
physicalPortDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User Applied Descriptor"
::= { physicalPortDefEntry 4 }
physicalPortDefAlsMode OBJECT-TYPE
SYNTAX FspR7AlsMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Determines the reaction in backward direction in response to a LOS
on the same Interface: on a Network Interface connected to the DWDM
this is a matter of laser safety"
::= { physicalPortDefEntry 5 }
physicalPortDefAutoThresReset OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Adaptive Threshold Control Reset"
::= { physicalPortDefEntry 6 }
physicalPortDefAutonegotiation OBJECT-TYPE
SYNTAX EnableState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Auto Negotiation for the data rate"
::= { physicalPortDefEntry 7 }
physicalPortDefBehaviour OBJECT-TYPE
SYNTAX FspR7PortBehaviour
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Behavior or Port usage based on configuration/usage in the system regardless of faceplate designation"
::= { physicalPortDefEntry 8 }
physicalPortDefDispertionConfig OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Chromatic Dispersion Compensation"
::= { physicalPortDefEntry 9 }
physicalPortDefDispersionSetting OBJECT-TYPE
SYNTAX Integer32 (-50000..50000)
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Chromatic Dispersion Compensation setting on module"
::= { physicalPortDefEntry 10 }
physicalPortDefDispersionMode OBJECT-TYPE
SYNTAX FspR7DispersionModes
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Chromatic Dispersion Compensation Mode"
::= { physicalPortDefEntry 11 }
physicalPortDefChannelProv OBJECT-TYPE
SYNTAX FspR7ChannelIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Channel"
::= { physicalPortDefEntry 12 }
physicalPortDefWdmRxChannel OBJECT-TYPE
SYNTAX FspR7ChannelIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Channel Number for the Receive Interface"
::= { physicalPortDefEntry 13 }
physicalPortDefCodeGain OBJECT-TYPE
SYNTAX FspR7CodeGain
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Forward Error Correction Coding gain"
::= { physicalPortDefEntry 14 }
physicalPortDefXfpDecisionThres OBJECT-TYPE
SYNTAX FspR7XfpDecisionThres
MAX-ACCESS read-only
STATUS current
DESCRIPTION "XFP Decision threshold setting"
::= { physicalPortDefEntry 15 }
physicalPortDefDisparityCorrection OBJECT-TYPE
SYNTAX EnableState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Disparity correction"
::= { physicalPortDefEntry 16 }
physicalPortDefEqlzAdmin OBJECT-TYPE
SYNTAX FspR7EnableDisable
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Scheduled Equalization Administration"
::= { physicalPortDefEntry 17 }
physicalPortDefErrorForwarding OBJECT-TYPE
SYNTAX FspR7ErrorFwdMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Determines the reaction in forward direction in response to a LOS on
the interface on the opposite side of the module: may override
this behaviour in the interests of laser safety."
::= { physicalPortDefEntry 18 }
physicalPortDefFecType OBJECT-TYPE
SYNTAX FspR7FecType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Forward Error Correction (Only relevant where TYPE = OTU#)"
::= { physicalPortDefEntry 19 }
physicalPortDefFarEndCommunication OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used for Optojack plugs; Communication to Far End Plug is observed"
::= { physicalPortDefEntry 20 }
physicalPortDefFlowControl OBJECT-TYPE
SYNTAX FspR7FlowControlMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Flow Control mechanism"
::= { physicalPortDefEntry 21 }
physicalPortDefForceLaserOn OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Laser Forced On"
::= { physicalPortDefEntry 22 }
physicalPortDefInhibitSwitchToProt OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Inhibit Switch to protection facility. Inhibition blocks an automatic switch
to the protection facility. Valid only for the working facility."
::= { physicalPortDefEntry 23 }
physicalPortDefInhibitSwitchToWork OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Inhibit Switch to working facility. Inhibition blocks an automatic switch to the
working facility. Valid only for the protection facility."
::= { physicalPortDefEntry 24 }
physicalPortDefLaneChannelSetting OBJECT-TYPE
SYNTAX FspR7ChannelIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Lane Channel Setting"
::= { physicalPortDefEntry 25 }
physicalPortDefLoopConfig OBJECT-TYPE
SYNTAX LoopConfig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The configuration of the loopback function.
- noLoop: no loop configuration on the interface.
- lineLoop: the incoming signal is looped to the outgoing
line on the interface. The incoming signal is sent in the
downstream direction and processed as normal.
- inwardLoop: the output signal is looped to the incoming line
on the interface. The looped signal is transmitted unchanged on
the optical output."
::= { physicalPortDefEntry 26 }
physicalPortDefLaserDelayTimer OBJECT-TYPE
SYNTAX FspR7LaserDelayTimer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Relevant only when ERRFWD=LSROFF. Enables/disables the
possibility to delay turning off and on the laser.
This applies to the case when turning off the laser
is done as an error forwarding mechanism."
::= { physicalPortDefEntry 27 }
physicalPortDefLaserOffTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
UNITS "ms"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Delay before laser is swiched off"
::= { physicalPortDefEntry 28 }
physicalPortDefLaserOnTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
UNITS "ms"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Delay before laser is switched on"
::= { physicalPortDefEntry 29 }
physicalPortDefLaserOffDelayFunction OBJECT-TYPE
SYNTAX EnableState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A configuration request for the Laser Off Delay function. This function
delays turning off the laser as a consequent action to a defect."
::= { physicalPortDefEntry 30 }
physicalPortDefAutoPTassignment OBJECT-TYPE
SYNTAX FspR7ManualAuto
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Auto assignment of ODU PT"
::= { physicalPortDefEntry 31 }
physicalPortDefTributarySlotMethod OBJECT-TYPE
SYNTAX FspR7ManualAuto
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tributary Slot assignment method"
::= { physicalPortDefEntry 32 }
physicalPortDefInitiateEqualization OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Initiate Equalization"
::= { physicalPortDefEntry 33 }
physicalPortDefLossAttenuation OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LOS Attenuation Finding in progress"
::= { physicalPortDefEntry 34 }
physicalPortDefOpticalSetPoint OBJECT-TYPE
SYNTAX Integer32 (-250..100)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sets the optical power for power equalization in ROADM or for channel power control in OPCM"
::= { physicalPortDefEntry 35 }
physicalPortDefDataLayerPmReset OBJECT-TYPE
SYNTAX FspR7PmReset
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reset data-layer Performance registers"
::= { physicalPortDefEntry 36 }
physicalPortDefPrbsPmReset OBJECT-TYPE
SYNTAX FspR7PmReset
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reset PRBS PM counters"
::= { physicalPortDefEntry 37 }
physicalPortDefTestPrbsRcvMode OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PRBS test pattern received"
::= { physicalPortDefEntry 38 }
physicalPortDefTestPrbsTrmtMode OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PRBS test pattern transmitted"
::= { physicalPortDefEntry 39 }
physicalPortDefSwitchCommand OBJECT-TYPE
SYNTAX FspR7APSCommand
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switch command action for this facility. A command resulting
in a switch event will also cause a change of the facility secondary state
and a corresponding condition. Addressed by this command is the active port,
the port to switch away from. Since this is a manual switch command, it will
not switch if other port suffers from a signalfailure or a signal degrade."
::= { physicalPortDefEntry 40 }
physicalPortDefOpuPayloadType OBJECT-TYPE
SYNTAX FspR7OpuPayloadType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OPU Payload Type Indicator"
::= { physicalPortDefEntry 41 }
physicalPortDefSigDegThresSonetLine OBJECT-TYPE
SYNTAX FspR7BERThreshold
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bit-Error-Based Degradation Definition for SONET (standard integration period)"
::= { physicalPortDefEntry 42 }
physicalPortDefSigDegThresSdhMs OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Block-Error-Based Degradation Definition for SDH (standard integration period).
Defined as percentage Background Block Errors (30% default) evaluated
over a defined period (SDPER-RS)."
::= { physicalPortDefEntry 43 }
physicalPortDefSigDegThresOtu OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Background-Block-Error-Based Signal Degradation Definition for OTU"
::= { physicalPortDefEntry 44 }
physicalPortDefSigDegThresOdu OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Background-Block-Error-Based Signal Degradation Definition for ODU"
::= { physicalPortDefEntry 45 }
physicalPortDefSigDegThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Threshold for number of errors (CV or CV+DE) in one second"
::= { physicalPortDefEntry 46 }
physicalPortDefSigDegPcslThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Block-Error-Based Degradation Definition for Physical Coding Sublayer"
::= { physicalPortDefEntry 47 }
physicalPortDefSigDegThresSonetSection OBJECT-TYPE
SYNTAX FspR7BERThreshold
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bit-Error-Based Degradation Definition for SONET (standard integration period)"
::= { physicalPortDefEntry 48 }
physicalPortDefSigDegThresSdhSection OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Block-Error-Based Degradation Definition for SDH (standard integration period).
Defined as percentage Background Block Errors (30% default) evaluated
over a defined period (SDPER-RS)."
::= { physicalPortDefEntry 49 }
physicalPortDefSigDegThresOduTcmA OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Background-Block-Error-Based Signal Degradation Definition for TCM-A"
::= { physicalPortDefEntry 50 }
physicalPortDefSigDegThresOduTcmB OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Background-Block-Error-Based Signal Degradation Definition for TCM-B"
::= { physicalPortDefEntry 51 }
physicalPortDefSigDegThresOduTcmC OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Background-Block-Error-Based Signal Degradation Definition for TCM-C"
::= { physicalPortDefEntry 52 }
physicalPortDefSignalDegradePeriod OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The measurement period in seconds used together with
the deployProvIfSigDegThresSdhRegSect based on the block error counting method.
The valid range is 2..10,
The default being 7."
::= { physicalPortDefEntry 53 }
physicalPortDefSigDegPeriodOdu OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integration Period for Signal degrade"
::= { physicalPortDefEntry 54 }
physicalPortDefSigDegPeriodOtu OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integration Period for Signal degrade"
::= { physicalPortDefEntry 55 }
physicalPortDefSigDegPeriodIntegration OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integration Period for Signal degrade"
::= { physicalPortDefEntry 56 }
physicalPortDefSigDegPeriodSdhSection OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Provisionable Signal Degrade Integration Period for SDH"
::= { physicalPortDefEntry 57 }
physicalPortDefSigDegPeriodOduTcmA OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integration Period for Signal degrade"
::= { physicalPortDefEntry 58 }
physicalPortDefSigDegPeriodOduTcmB OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integration Period of TCMB Signal Segrade"
::= { physicalPortDefEntry 59 }
physicalPortDefSigDegPeriodOduTcmC OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integration Period of TCMC Signal Segrade"
::= { physicalPortDefEntry 60 }
physicalPortDefOtnStuffing OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates if bit/byte stuffing is used in the transport signal."
::= { physicalPortDefEntry 61 }
physicalPortDefTcmALevel OBJECT-TYPE
SYNTAX OtnTcmLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Activation of Tandem Connection Monitoring Instance A"
::= { physicalPortDefEntry 62 }
physicalPortDefTcmBLevel OBJECT-TYPE
SYNTAX OtnTcmLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Activation of Tandem Connection Monitoring Instance B"
::= { physicalPortDefEntry 63 }
physicalPortDefTcmCLevel OBJECT-TYPE
SYNTAX OtnTcmLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Activation of Tandem Connection Monitoring Instance C"
::= { physicalPortDefEntry 64 }
physicalPortDefTerminationLevel OBJECT-TYPE
SYNTAX OhTerminationLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Highest signal level hardware removes then generates for transmission."
::= { physicalPortDefEntry 65 }
physicalPortDefTimingSource OBJECT-TYPE
SYNTAX SonetTimingSource
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timing source for this interface.
- internal: used in stand-alone, point-to-point topologies stand-alone (dedicated fiber operation).
- loopTiming: e.g. used in point-to-point via SONET network and feeder topologies. The default is
internal(1)."
::= { physicalPortDefEntry 66 }
physicalPortDefTimModeOdu OBJECT-TYPE
SYNTAX TimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection of TIM-ODU Condition can be configured"
::= { physicalPortDefEntry 67 }
physicalPortDefTimModeOtu OBJECT-TYPE
SYNTAX TimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OTU Trace Identifier Mismatch (TIM) detection/action for TIM defect."
::= { physicalPortDefEntry 68 }
physicalPortDefTimModeSonetSection OBJECT-TYPE
SYNTAX TimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SONET Section Trace Identifier Mismatch (TIM) detection/action for TIM defect."
::= { physicalPortDefEntry 69 }
physicalPortDefTimModeOduTcmA OBJECT-TYPE
SYNTAX TimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCM_A Trace Identifier Mismatch (TIM) detection/action for TIM defect."
::= { physicalPortDefEntry 70 }
physicalPortDefTimModeOduTcmB OBJECT-TYPE
SYNTAX TimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCM_B Trace Identifier Mismatch (TIM) detection/action for TIM defect."
::= { physicalPortDefEntry 71 }
physicalPortDefTimModeOduTcmC OBJECT-TYPE
SYNTAX TimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCM_C Trace Identifier Mismatch (TIM) detection/action for TIM defect."
::= { physicalPortDefEntry 72 }
physicalPortDefTraceFormSonetSection OBJECT-TYPE
SYNTAX SonetTraceForm
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Byte-Length of Trace Compared to Expected"
::= { physicalPortDefEntry 73 }
physicalPortDefTraceExpectedSonetSection OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..62))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected Sec/RS trace. NULL TRACE implies that no trace comparison is made."
::= { physicalPortDefEntry 74 }
physicalPortDefTraceTransmitSonetSection OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..62))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sec/RS Trace to be Transmitted"
::= { physicalPortDefEntry 75 }
physicalPortDefTraceExpectedOtu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected SAPI part of the OTU trace (15 character). NULL TRACE implies that no trace comparison is made."
::= { physicalPortDefEntry 76 }
physicalPortDefTraceTransmitSapiOtu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted SAPI part of the OTU trace (15 character)"
::= { physicalPortDefEntry 77 }
physicalPortDefTraceTransmitDapiOtu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted DAPI part of the OTU trace (15 character)"
::= { physicalPortDefEntry 78 }
physicalPortDefTraceTransmitOpspOtu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted Operator Specific part of the OTU trace (32 character)"
::= { physicalPortDefEntry 79 }
physicalPortDefTraceExpectedOdu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected SAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made."
::= { physicalPortDefEntry 80 }
physicalPortDefTraceTransmitSapiOdu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted SAPI part of the ODU trace (15 character)"
::= { physicalPortDefEntry 81 }
physicalPortDefTraceTransmitDapiOdu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted DAPI part of the ODU trace (15 character)"
::= { physicalPortDefEntry 82 }
physicalPortDefTraceTransmitOpspOdu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted Operator Specific part of the ODU trace (32 character)"
::= { physicalPortDefEntry 83 }
physicalPortDefTraceExpectedOduTcmA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected SAPI part of the TCMA trace (15 character). NULL TRACE-TCM implies that no trace comparison is made."
::= { physicalPortDefEntry 84 }
physicalPortDefTraceTransmitSapiOduTcmA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted SAPI part of the TCMA trace (15 character)"
::= { physicalPortDefEntry 85 }
physicalPortDefTraceTransmitDapiOduTcmA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted DAPI part of the TCMA trace (15 character)"
::= { physicalPortDefEntry 86 }
physicalPortDefTraceTransmitOpspOduTcmA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted Operator Specific part of the TCMA trace (32 character)"
::= { physicalPortDefEntry 87 }
physicalPortDefTraceExpectedOduTcmB OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected SAPI part of the TCMB trace (15 character). NULL TRACE-TCM implies that no trace comparison is made."
::= { physicalPortDefEntry 88 }
physicalPortDefTraceTransmitSapiOduTcmB OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted SAPI part of the TCMB trace (15 character)"
::= { physicalPortDefEntry 89 }
physicalPortDefTraceTransmitDapiOduTcmB OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted DAPI part of the TCMB trace (15 character)"
::= { physicalPortDefEntry 90 }
physicalPortDefTraceTransmitOpspOduTcmB OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted Operator Specific part of the TCMB trace (32 character)"
::= { physicalPortDefEntry 91 }
physicalPortDefTraceExpectedOduTcmC OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected SAPI part of the TCMC trace (15 character). NULL TRACE-TCM implies that no trace comparison is made."
::= { physicalPortDefEntry 92 }
physicalPortDefTraceTransmitSapiOduTcmC OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted SAPI part of the TCMC trace (15 character)"
::= { physicalPortDefEntry 93 }
physicalPortDefTraceTransmitDapiOduTcmC OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted DAPI part of the TCMC trace (15 character)"
::= { physicalPortDefEntry 94 }
physicalPortDefTraceTransmitOpspOduTcmC OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted Operator Specific part of the TCMC trace (32 character)"
::= { physicalPortDefEntry 95 }
physicalPortDefTurnupConfig OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Turnup Operation"
::= { physicalPortDefEntry 96 }
physicalPortDefTxOffDelay OBJECT-TYPE
SYNTAX FspR7EnableDisable
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Enable or disable TXOFFHOLD Period for Error Forwarding and LKDO-OFF Consequent Action."
::= { physicalPortDefEntry 97 }
physicalPortDefVoaMode OBJECT-TYPE
SYNTAX FspR7VoaMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VOA operating mode"
::= { physicalPortDefEntry 98 }
physicalPortDefVoaSetpoint OBJECT-TYPE
SYNTAX Unsigned32 (0..300)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sets the optical attenuation of VOA"
::= { physicalPortDefEntry 99 }
physicalPortDefLagPrio OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Part of ID. Port pri that defines standby."
::= { physicalPortDefEntry 100 }
physicalPortDefMaxFrameSize OBJECT-TYPE
SYNTAX Unsigned32 (1518..9600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Max Frame Size"
::= { physicalPortDefEntry 101 }
physicalPortDefPayload OBJECT-TYPE
SYNTAX OtnPayloadType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The PAYLOAD defines the transport service type of the payload"
::= { physicalPortDefEntry 102 }
physicalPortDefPortMode OBJECT-TYPE
SYNTAX FspR7PortMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port Mode"
::= { physicalPortDefEntry 103 }
physicalPortDefPortRole OBJECT-TYPE
SYNTAX FspR7PortRole
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ADVA cloud Port Roles"
::= { physicalPortDefEntry 104 }
physicalPortDefPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Default PCP in case UTAG is Enabled. The Prio may be remapped in the EVC."
::= { physicalPortDefEntry 105 }
physicalPortDefPvid OBJECT-TYPE
SYNTAX Unsigned32 (1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Default VLAN ID (both STAG/CTAG mode) in case UTAG is enabled"
::= { physicalPortDefEntry 106 }
physicalPortDefStagType OBJECT-TYPE
SYNTAX FspR7SnmpHexString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TAG type field"
::= { physicalPortDefEntry 107 }
physicalPortDefUtag OBJECT-TYPE
SYNTAX FspR7UntaggedFrames
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If untagged frames shall be enabled on this port or not."
::= { physicalPortDefEntry 108 }
physicalPortDefVethAid OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Shows if PORT is a member in the LAG with the VETH AID"
::= { physicalPortDefEntry 109 }
physicalPortDefRedLineState OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "will be set by higher level software to act as a barrier to deletion"
::= { physicalPortDefEntry 110 }
physicalPortDefTunnelAid OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tunnel AID"
::= { physicalPortDefEntry 111 }
physicalPortDefRateLimit OBJECT-TYPE
SYNTAX FspR7DisableEnable
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Selection to apply rate limit feature or not."
::= { physicalPortDefEntry 112 }
physicalPortDefTxOffOnTm OBJECT-TYPE
SYNTAX FspR7TxOffOnTm
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Relevant only when ERRFWD=TXOFF. Enables/disables the
possibility to delay turning off and on the the transmitter.
This applies to the case when turning off the transmitter
is done as an error forwarding mechanism."
::= { physicalPortDefEntry 113 }
physicalPortDefTxOffTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
UNITS "ms"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Delay before transmitter is swiched off"
::= { physicalPortDefEntry 114 }
physicalPortDefTxOnTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
UNITS "ms"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Delay before transmitter is switched on"
::= { physicalPortDefEntry 115 }
physicalPortDefMode OBJECT-TYPE
SYNTAX FspR7TransmissionMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mode of the module, determine operation or functionality"
::= { physicalPortDefEntry 116 }
physicalPortDefMonLevel OBJECT-TYPE
SYNTAX FspR7MonLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Highest signal level of intrusive or non-intrusive monitoring. Hardware may monitor the signal one layer higher than Termination Level (TERM)."
::= { physicalPortDefEntry 117 }
physicalPortDefChannelPlan OBJECT-TYPE
SYNTAX FspR7ChannelRangeInventory
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Channel Range"
::= { physicalPortDefEntry 118 }
physicalPortDefOptimize OBJECT-TYPE
SYNTAX FspR7Optimize
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Optimizes port for either protection switch time or traffic regeneration operation"
::= { physicalPortDefEntry 119 }
physicalPortDefEncryptionChannel OBJECT-TYPE
SYNTAX CryptoFspR7EncryptionCommunication
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Embedded Communication Channel used to support Encryption"
::= { physicalPortDefEntry 120 }
physicalPortDefLinkSetup OBJECT-TYPE
SYNTAX FspR7DisableEnable
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Support RDMA over Converged Ethernet (RoCE)"
::= { physicalPortDefEntry 121 }
physicalPortDefCdCompensationRange OBJECT-TYPE
SYNTAX FspR7CdCompensationRange
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Chromatic Dispersion Compensation Goal"
::= { physicalPortDefEntry 122 }
physicalPortDefChannelSpacing OBJECT-TYPE
SYNTAX FspR7ChannelSpacing
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ITU Grid channel spacing"
::= { physicalPortDefEntry 123 }
physicalPortDefLLDPNeighborsRx OBJECT-TYPE
SYNTAX FspR7LLDPNeighbors
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP Neighbors in Rx Direction"
::= { physicalPortDefEntry 124 }
physicalPortDefLLDPNeighborsTx OBJECT-TYPE
SYNTAX FspR7LLDPNeighbors
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP Neighbors in Tx Direction"
::= { physicalPortDefEntry 125 }
physicalPortDefCdPostCompensationRange OBJECT-TYPE
SYNTAX FspR7CdPostCompensationRange
MAX-ACCESS read-only
STATUS current
DESCRIPTION "CD Post Compensation Range
Range 1: [-22 ns/nm to +6 ns/nm] or [-20 ns/nm to +2 ns/nm]
Range 2: [-72 ns/nm to +6 ns/nm] or [-45 ns/nm to +5 ns/nm]
Range 3: [-120 ns/nm to +6 ns/nm]
Range 4: [-280 ns/nm to +6 ns/nm]"
::= { physicalPortDefEntry 126 }
physicalPortDefLaneChannel1 OBJECT-TYPE
SYNTAX FspR7ChannelIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Lane Channel"
::= { physicalPortDefEntry 127 }
physicalPortDefLaneChannel2 OBJECT-TYPE
SYNTAX FspR7ChannelIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Lane Channel"
::= { physicalPortDefEntry 128 }
physicalPortDefOpticalSetPointLane1 OBJECT-TYPE
SYNTAX Integer32 (-250..100)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Optical Power Setpoint for Optical Transport Lane 1"
::= { physicalPortDefEntry 129 }
physicalPortDefOpticalSetPointLane2 OBJECT-TYPE
SYNTAX Integer32 (-250..100)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Optical Power Setpoint for Optical Transport Lane 2"
::= { physicalPortDefEntry 130 }
physicalPortDefTerminationMode OBJECT-TYPE
SYNTAX FspR7TerminationMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "FSP 3000 C Signal Termination Modes
Monitor or Terminate describes general signal handling at layer
Mux indicates if signal is multiplexed or demultiplexed at layer
Connect indicates support for Sub Network Connection (SNC), cross-connect"
::= { physicalPortDefEntry 131 }
physicalPortDefTimDetModeOtu OBJECT-TYPE
SYNTAX FspR7TimDetMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OTU Trace Identifier Mismatch (TIM) strings compared to generate TIM defect."
::= { physicalPortDefEntry 132 }
physicalPortDefTimActionOtu OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Trace Identifier Mismatch (TIM) is reported as an alarm when detected. User selection allow traffic or AIS to be sent while the mismatch is present."
::= { physicalPortDefEntry 133 }
physicalPortDefTraceExpectedDapiOtu OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected DAPI part of the OTU trace (15 character). NULL TRACE implies that no trace comparison is made."
::= { physicalPortDefEntry 134 }
physicalPortDefTraceExpectedOpspOtu OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected OPSP part of the OTU trace (32 character). NULL TRACE implies that no trace comparison is made."
::= { physicalPortDefEntry 135 }
physicalPortDefTimDetModeOdu OBJECT-TYPE
SYNTAX FspR7TimDetMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ODU Trace Identifier Mismatch (TIM) strings compared to generate TIM defect."
::= { physicalPortDefEntry 136 }
physicalPortDefTimActionOdu OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Trace Identifier Mismatch (TIM) is reported as an alarm when detected. User selection allow traffic or AIS to be sent while the mismatch is present."
::= { physicalPortDefEntry 137 }
physicalPortDefTraceExpectedDapiOdu OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected DAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made."
::= { physicalPortDefEntry 138 }
physicalPortDefTraceExpectedOpspOdu OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected OPSP part of the ODU trace (32 character). NULL TRACE implies that no trace comparison is made."
::= { physicalPortDefEntry 139 }
physicalPortDefReportAisLine OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Whether AIS alarm (Line/MS) is reported or not."
::= { physicalPortDefEntry 140 }
physicalPortDefReportSsfLine OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Whether SSF alarm (Line/MS) is reported or not."
::= { physicalPortDefEntry 141 }
physicalPortDefReportSsfSection OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Whether SSF alarm (Section/RS) is reported or not."
::= { physicalPortDefEntry 142 }
physicalPortDefDelayMeasurementOperation OBJECT-TYPE
SYNTAX FspR7DmsrmtOperation
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Delay Measurement start"
::= { physicalPortDefEntry 143 }
virtualPortDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF VirtualPortDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "virtualPortDefTable"
::= { facilityMgmtDef 2 }
virtualPortDefEntry OBJECT-TYPE
SYNTAX VirtualPortDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of virtualPortDefTable"
INDEX {
entityFacilityShelfNo,
entityFacilitySlotNo,
entityFacilityPortNo,
entityFacilityExtNo,
entityFacilityClassName
}
::= { virtualPortDefTable 1 }
VirtualPortDefEntry ::= SEQUENCE
{ virtualPortDefRowStatus RowStatus,
virtualPortDefChannelBand FspR7ChannelBandwidth,
virtualPortDefType FspR7InterfaceType,
virtualPortDefAlias SnmpAdminString,
virtualPortDefAdmin FspR7AdminState,
virtualPortDefEqlzAdmin FspR7EnableDisable,
virtualPortDefInitEqlz FspR7RlsAction,
virtualPortDefLacpMode FspR7LacpMode,
virtualPortDefLacpTimeout FspR7LacpTimeout,
virtualPortDefLagActivePorts Unsigned32,
virtualPortDefMaxFrameSize Unsigned32,
virtualPortDefPortMode FspR7PortMode,
virtualPortDefDataLayerPmReset FspR7PmReset,
virtualPortDefPortRole FspR7PortRole,
virtualPortDefLagPortType FspR7LagPortType,
virtualPortDefPriority Unsigned32,
virtualPortDefPvid Unsigned32,
virtualPortDefRevertiveMode ApsRevertMode,
virtualPortDefStagType FspR7SnmpHexString,
virtualPortDefUtag FspR7UntaggedFrames,
virtualPortDefBundle FspR7SnmpLongString,
virtualPortDefSwitchCommand FspR7APSCommand,
virtualPortDefInhibitSwitchToWork FspR7YesNo,
virtualPortDefInhibitSwitchToProt FspR7YesNo,
virtualPortDefOduTribPortNo SnmpAdminString,
virtualPortDefOduTribTimeSlottNo SnmpAdminString,
virtualPortDefSigDegThresOdu Integer32,
virtualPortDefSigDegPeriodOdu Unsigned32,
virtualPortDefTraceExpectedOdu OCTET STRING,
virtualPortDefTraceTransmitSapiOdu OCTET STRING,
virtualPortDefTraceTransmitDapiOdu OCTET STRING,
virtualPortDefTraceTransmitOpspOdu OCTET STRING,
virtualPortDefTimModeOdu TimMode,
virtualPortDefSigDegThresOduTcmA Integer32,
virtualPortDefSigDegPeriodOduTcmA Unsigned32,
virtualPortDefSigDegThresOduTcmB Integer32,
virtualPortDefSigDegPeriodOduTcmB Unsigned32,
virtualPortDefSigDegThresOduTcmC Integer32,
virtualPortDefSigDegPeriodOduTcmC Unsigned32,
virtualPortDefTcmALevel OtnTcmLevel,
virtualPortDefTcmBLevel OtnTcmLevel,
virtualPortDefTcmCLevel OtnTcmLevel,
virtualPortDefTraceTransmitSapiOduTcmA OCTET STRING,
virtualPortDefTraceTransmitDapiOduTcmA OCTET STRING,
virtualPortDefTraceTransmitOpspOduTcmA OCTET STRING,
virtualPortDefTraceExpectedOduTcmA OCTET STRING,
virtualPortDefTimModeOduTcmA TimMode,
virtualPortDefTraceExpectedOduTcmB OCTET STRING,
virtualPortDefTraceTransmitSapiOduTcmB OCTET STRING,
virtualPortDefTraceTransmitDapiOduTcmB OCTET STRING,
virtualPortDefTraceTransmitOpspOduTcmB OCTET STRING,
virtualPortDefTimModeOduTcmB TimMode,
virtualPortDefTraceExpectedOduTcmC OCTET STRING,
virtualPortDefTraceTransmitSapiOduTcmC OCTET STRING,
virtualPortDefTraceTransmitDapiOduTcmC OCTET STRING,
virtualPortDefTraceTransmitOpspOduTcmC OCTET STRING,
virtualPortDefTimModeOduTcmC TimMode,
virtualPortDefTerminationLevel OhTerminationLevel,
virtualPortDefLoopConfig LoopConfig,
virtualPortDefVcType VirtualContainerType,
virtualPortDefCir Unsigned32,
virtualPortDefOpuPayloadType FspR7OpuPayloadType,
virtualPortDefOtnStuffing FspR7YesNo,
virtualPortDefRedLineState FspR7YesNo,
virtualPortDefTunnelAid SnmpAdminString,
virtualPortDefOptSetDeviation Integer32,
virtualPortDefPayload OtnPayloadType,
virtualPortDefPrbsPmReset FspR7PmReset,
virtualPortDefTestPrbsRcvMode FspR7RlsAction,
virtualPortDefTestPrbsTrmtMode FspR7RlsAction,
virtualPortDefTimDetModeOdu FspR7TimDetMode,
virtualPortDefTimActionOdu FspR7YesNo,
virtualPortDefTraceExpectedDapiOdu SnmpAdminString,
virtualPortDefTraceExpectedOpspOdu SnmpAdminString }
virtualPortDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Virtual Port Capability RowStatus."
::= { virtualPortDefEntry 1 }
virtualPortDefChannelBand OBJECT-TYPE
SYNTAX FspR7ChannelBandwidth
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Virtual Port Capability Channel Bandwidth."
::= { virtualPortDefEntry 2 }
virtualPortDefType OBJECT-TYPE
SYNTAX FspR7InterfaceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Virtual Port Capability Facility Type."
::= { virtualPortDefEntry 3 }
virtualPortDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Virtual Port Capability Alias."
::= { virtualPortDefEntry 4 }
virtualPortDefAdmin OBJECT-TYPE
SYNTAX FspR7AdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Virtual Port Capability Adminstrative State."
::= { virtualPortDefEntry 5 }
virtualPortDefEqlzAdmin OBJECT-TYPE
SYNTAX FspR7EnableDisable
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Virtual Port Capability Fiber Connection Attenuation."
::= { virtualPortDefEntry 6 }
virtualPortDefInitEqlz OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Virtual Port Capability Initiate Equalization."
::= { virtualPortDefEntry 7 }
virtualPortDefLacpMode OBJECT-TYPE
SYNTAX FspR7LacpMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Enable of LACP state machine"
::= { virtualPortDefEntry 8 }
virtualPortDefLacpTimeout OBJECT-TYPE
SYNTAX FspR7LacpTimeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timeout of the LACP"
::= { virtualPortDefEntry 9 }
virtualPortDefLagActivePorts OBJECT-TYPE
SYNTAX Unsigned32 (1..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of active ports in the Link Aggregation Group"
::= { virtualPortDefEntry 10 }
virtualPortDefMaxFrameSize OBJECT-TYPE
SYNTAX Unsigned32 (1518..9600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Max Frame Size"
::= { virtualPortDefEntry 11 }
virtualPortDefPortMode OBJECT-TYPE
SYNTAX FspR7PortMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port Mode"
::= { virtualPortDefEntry 12 }
virtualPortDefDataLayerPmReset OBJECT-TYPE
SYNTAX FspR7PmReset
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reset data-layer Performance registers"
::= { virtualPortDefEntry 13 }
virtualPortDefPortRole OBJECT-TYPE
SYNTAX FspR7PortRole
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ADVA cloud Port Roles"
::= { virtualPortDefEntry 14 }
virtualPortDefLagPortType OBJECT-TYPE
SYNTAX FspR7LagPortType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type/Speed of connected ports in the Link Aggregation Group"
::= { virtualPortDefEntry 15 }
virtualPortDefPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Default PCP in case UTAG is Enabled. The Prio may be remapped in the EVC."
::= { virtualPortDefEntry 16 }
virtualPortDefPvid OBJECT-TYPE
SYNTAX Unsigned32 (1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Default VLAN ID (both STAG/CTAG mode) in case UTAG is enabled"
::= { virtualPortDefEntry 17 }
virtualPortDefRevertiveMode OBJECT-TYPE
SYNTAX ApsRevertMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Revertive Protection Switching"
::= { virtualPortDefEntry 18 }
virtualPortDefStagType OBJECT-TYPE
SYNTAX FspR7SnmpHexString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TAG type field"
::= { virtualPortDefEntry 19 }
virtualPortDefUtag OBJECT-TYPE
SYNTAX FspR7UntaggedFrames
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If untagged frames shall be enabled on this port or not."
::= { virtualPortDefEntry 20 }
virtualPortDefBundle OBJECT-TYPE
SYNTAX FspR7SnmpLongString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "List of VC4/VC3/STS1/STS3c/STS24c/STS48c containers used in the BUNDLE"
::= { virtualPortDefEntry 21 }
virtualPortDefSwitchCommand OBJECT-TYPE
SYNTAX FspR7APSCommand
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switch command action for this facility. A command resulting
in a switch event will also cause a change of the facility secondary state
and a corresponding condition. Addressed by this command is the active port,
the port to switch away from. Since this is a manual switch command, it will
not switch if other port suffers from a signalfailure or a signal degrade."
::= { virtualPortDefEntry 22 }
virtualPortDefInhibitSwitchToWork OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Inhibit Switch to working facility. Inhibition blocks an automatic switch to the
working facility. Valid only for the protection facility."
::= { virtualPortDefEntry 23 }
virtualPortDefInhibitSwitchToProt OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Inhibit Switch to protection facility. Inhibition blocks an automatic switch
to the protection facility. Valid only for the working facility."
::= { virtualPortDefEntry 24 }
virtualPortDefOduTribPortNo OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ODU Tributary Port Number"
::= { virtualPortDefEntry 25 }
virtualPortDefOduTribTimeSlottNo OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ODU Tributary slot number. Multiple values can be entered as a string, separated by commas or given as a range.
For capabilities objects possible number of slots and valid range are displayed in a form:
[1,2,3,8][count: 1-1]
In first brackets valid slots are shown and in the second possible number of slots."
::= { virtualPortDefEntry 26 }
virtualPortDefSigDegThresOdu OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Background-Block-Error-Based Signal Degradation Definition for ODU"
::= { virtualPortDefEntry 27 }
virtualPortDefSigDegPeriodOdu OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integration Period for Signal degrade"
::= { virtualPortDefEntry 28 }
virtualPortDefTraceExpectedOdu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected SAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made."
::= { virtualPortDefEntry 29 }
virtualPortDefTraceTransmitSapiOdu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted SAPI part of the ODU trace (15 character)"
::= { virtualPortDefEntry 30 }
virtualPortDefTraceTransmitDapiOdu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted DAPI part of the ODU trace (15 character)"
::= { virtualPortDefEntry 31 }
virtualPortDefTraceTransmitOpspOdu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted Operator Specific part of the ODU trace (32 character)"
::= { virtualPortDefEntry 32 }
virtualPortDefTimModeOdu OBJECT-TYPE
SYNTAX TimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection of TIM-ODU Condition can be configured"
::= { virtualPortDefEntry 33 }
virtualPortDefSigDegThresOduTcmA OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Background-Block-Error-Based Signal Degradation Definition for TCM-A"
::= { virtualPortDefEntry 34 }
virtualPortDefSigDegPeriodOduTcmA OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integration Period for Signal degrade"
::= { virtualPortDefEntry 35 }
virtualPortDefSigDegThresOduTcmB OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Background-Block-Error-Based Signal Degradation Definition for TCM-B"
::= { virtualPortDefEntry 36 }
virtualPortDefSigDegPeriodOduTcmB OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integration Period of TCMB Signal Segrade"
::= { virtualPortDefEntry 37 }
virtualPortDefSigDegThresOduTcmC OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Background-Block-Error-Based Signal Degradation Definition for TCM-C"
::= { virtualPortDefEntry 38 }
virtualPortDefSigDegPeriodOduTcmC OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integration Period of TCMC Signal Segrade"
::= { virtualPortDefEntry 39 }
virtualPortDefTcmALevel OBJECT-TYPE
SYNTAX OtnTcmLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Activation of Tandem Connection Monitoring Instance A"
::= { virtualPortDefEntry 40 }
virtualPortDefTcmBLevel OBJECT-TYPE
SYNTAX OtnTcmLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Activation of Tandem Connection Monitoring Instance B"
::= { virtualPortDefEntry 41 }
virtualPortDefTcmCLevel OBJECT-TYPE
SYNTAX OtnTcmLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Activation of Tandem Connection Monitoring Instance C"
::= { virtualPortDefEntry 42 }
virtualPortDefTraceTransmitSapiOduTcmA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted SAPI part of the TCMA trace (15 character)"
::= { virtualPortDefEntry 43 }
virtualPortDefTraceTransmitDapiOduTcmA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted DAPI part of the TCMA trace (15 character)"
::= { virtualPortDefEntry 44 }
virtualPortDefTraceTransmitOpspOduTcmA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted Operator Specific part of the TCMA trace (32 character)"
::= { virtualPortDefEntry 45 }
virtualPortDefTraceExpectedOduTcmA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected SAPI part of the TCMA trace (15 character). NULL TRACE-TCM implies that no trace comparison is made."
::= { virtualPortDefEntry 46 }
virtualPortDefTimModeOduTcmA OBJECT-TYPE
SYNTAX TimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCM_A Trace Identifier Mismatch (TIM) detection/action for TIM defect."
::= { virtualPortDefEntry 47 }
virtualPortDefTraceExpectedOduTcmB OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected SAPI part of the TCMB trace (15 character). NULL TRACE-TCM implies that no trace comparison is made."
::= { virtualPortDefEntry 48 }
virtualPortDefTraceTransmitSapiOduTcmB OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted SAPI part of the TCMB trace (15 character)"
::= { virtualPortDefEntry 49 }
virtualPortDefTraceTransmitDapiOduTcmB OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted DAPI part of the TCMB trace (15 character)"
::= { virtualPortDefEntry 50 }
virtualPortDefTraceTransmitOpspOduTcmB OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted Operator Specific part of the TCMB trace (32 character)"
::= { virtualPortDefEntry 51 }
virtualPortDefTimModeOduTcmB OBJECT-TYPE
SYNTAX TimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCM_B Trace Identifier Mismatch (TIM) detection/action for TIM defect."
::= { virtualPortDefEntry 52 }
virtualPortDefTraceExpectedOduTcmC OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected SAPI part of the TCMC trace (15 character). NULL TRACE-TCM implies that no trace comparison is made."
::= { virtualPortDefEntry 53 }
virtualPortDefTraceTransmitSapiOduTcmC OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted SAPI part of the TCMC trace (15 character)"
::= { virtualPortDefEntry 54 }
virtualPortDefTraceTransmitDapiOduTcmC OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted DAPI part of the TCMC trace (15 character)"
::= { virtualPortDefEntry 55 }
virtualPortDefTraceTransmitOpspOduTcmC OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted Operator Specific part of the TCMC trace (32 character)"
::= { virtualPortDefEntry 56 }
virtualPortDefTimModeOduTcmC OBJECT-TYPE
SYNTAX TimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCM_C Trace Identifier Mismatch (TIM) detection/action for TIM defect."
::= { virtualPortDefEntry 57 }
virtualPortDefTerminationLevel OBJECT-TYPE
SYNTAX OhTerminationLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Highest signal level hardware removes then generates for transmission."
::= { virtualPortDefEntry 58 }
virtualPortDefLoopConfig OBJECT-TYPE
SYNTAX LoopConfig
MAX-ACCESS read-only
STATUS current
DESCRIPTION "External or Facility Loopback"
::= { virtualPortDefEntry 59 }
virtualPortDefVcType OBJECT-TYPE
SYNTAX VirtualContainerType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Virtual Container Group Type"
::= { virtualPortDefEntry 60 }
virtualPortDefCir OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Mbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "CIR (Committed Information Rate ) is used on Ethernet Interfaces with a policing function"
::= { virtualPortDefEntry 61 }
virtualPortDefOpuPayloadType OBJECT-TYPE
SYNTAX FspR7OpuPayloadType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OPU Payload Type Indicator"
::= { virtualPortDefEntry 62 }
virtualPortDefOtnStuffing OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates if bit/byte stuffing is used in the transport signal."
::= { virtualPortDefEntry 63 }
virtualPortDefRedLineState OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "will be set by higher level software to act as a barrier to deletion"
::= { virtualPortDefEntry 64 }
virtualPortDefTunnelAid OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tunnel AID"
::= { virtualPortDefEntry 65 }
virtualPortDefOptSetDeviation OBJECT-TYPE
SYNTAX Integer32 (-100..100)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Channel optical power delta from the port optical power set-point used for equalization (use is optional)."
::= { virtualPortDefEntry 66 }
virtualPortDefPayload OBJECT-TYPE
SYNTAX OtnPayloadType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The PAYLOAD defines the transport service type of the payload"
::= { virtualPortDefEntry 67 }
virtualPortDefPrbsPmReset OBJECT-TYPE
SYNTAX FspR7PmReset
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reset PRBS PM counters"
::= { virtualPortDefEntry 68 }
virtualPortDefTestPrbsRcvMode OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PRBS test pattern received"
::= { virtualPortDefEntry 69 }
virtualPortDefTestPrbsTrmtMode OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PRBS test pattern transmitted"
::= { virtualPortDefEntry 70 }
virtualPortDefTimDetModeOdu OBJECT-TYPE
SYNTAX FspR7TimDetMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ODU Trace Identifier Mismatch (TIM) strings compared to generate TIM defect."
::= { virtualPortDefEntry 71 }
virtualPortDefTimActionOdu OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Trace Identifier Mismatch (TIM) is reported as an alarm when detected. User selection allow traffic or AIS to be sent while the mismatch is present."
::= { virtualPortDefEntry 72 }
virtualPortDefTraceExpectedDapiOdu OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected DAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made."
::= { virtualPortDefEntry 73 }
virtualPortDefTraceExpectedOpspOdu OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected OPSP part of the ODU trace (32 character). NULL TRACE implies that no trace comparison is made."
::= { virtualPortDefEntry 74 }
endOfVirtualPortDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { facilityMgmtDef 3 }
lldpDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "lldpDefTable"
::= { facilityMgmtDef 4 }
lldpDefEntry OBJECT-TYPE
SYNTAX LldpDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of lldpDefTable"
INDEX {
entityFacilityShelfNo,
entityFacilitySlotNo,
entityFacilityPortNo,
entityFacilityExtNo,
entityFacilityClassName
}
::= { lldpDefTable 1 }
LldpDefEntry ::= SEQUENCE
{ lldpDefRowStatus RowStatus,
lldpDefType FspR7InterfaceType,
lldpDefAlias SnmpAdminString,
lldpDefDataLayerPmReset FspR7PmReset,
lldpDefAdmin FspR7AdminState,
lldpDefLLDPScope FspR7LLDPScope }
lldpDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP Capability RowStatus."
::= { lldpDefEntry 1 }
lldpDefType OBJECT-TYPE
SYNTAX FspR7InterfaceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP Capability Facility Type."
::= { lldpDefEntry 2 }
lldpDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP Capability Alias."
::= { lldpDefEntry 3 }
lldpDefDataLayerPmReset OBJECT-TYPE
SYNTAX FspR7PmReset
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reset data-layer Performance registers"
::= { lldpDefEntry 4 }
lldpDefAdmin OBJECT-TYPE
SYNTAX FspR7AdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP Capability Adminstrative State."
::= { lldpDefEntry 5 }
lldpDefLLDPScope OBJECT-TYPE
SYNTAX FspR7LLDPScope
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Scope of LLDP propogation based on standard group MAC Addresses"
::= { lldpDefEntry 6 }
endOfLldpDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { facilityMgmtDef 5 }
endOfFacilityMgmtDef OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { facilityMgmtDef 10000 }
linkDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF LinkDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "linkCapTable"
::= { dcnMgmtDef 1 }
linkDefEntry OBJECT-TYPE
SYNTAX LinkDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of linkCapTable"
INDEX {
entityDcnShelfNo,
entityDcnSlotNo,
entityDcnPortNo,
entityDcnExtNo,
entityDcnClassName
}
::= { linkDefTable 1 }
LinkDefEntry ::= SEQUENCE
{ linkDefRowStatus RowStatus,
linkDefType FspR7InterfaceType,
linkDefAdmin FspR7AdminState,
linkDefAlias SnmpAdminString,
linkDefAuthString SnmpAdminString,
linkDefProxyArp FspR7NoYes,
linkDefOspf FspR7OspfMode,
linkDefBaud FspR7Baund,
linkDefAuthType FspR7CpAuthType,
linkDefIpType FspR7IpType,
linkDefMetric Unsigned32,
linkDefAreaAid SnmpAdminString,
linkDefNearEndIp IpAddress,
linkDefBitrate Unsigned32,
linkDefIPv6Type FspR7IPv6Type,
linkDefNendIPv6 SnmpAdminString,
linkDefMtu Unsigned32,
linkDefHelloInterval Unsigned32,
linkDefDeadInterval Unsigned32,
linkDefRetransmitInterval Unsigned32,
linkDefFarEndIp IpAddress,
linkDefFendLogicalIpAddr IpAddress }
linkDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus object is used to create or delete a row in the table."
::= { linkDefEntry 1 }
linkDefType OBJECT-TYPE
SYNTAX FspR7InterfaceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload"
::= { linkDefEntry 2 }
linkDefAdmin OBJECT-TYPE
SYNTAX FspR7AdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted."
::= { linkDefEntry 3 }
linkDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User Applied Descriptor"
::= { linkDefEntry 4 }
linkDefAuthString OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF Authentication Key/String depending on Authentication Type"
::= { linkDefEntry 5 }
linkDefProxyArp OBJECT-TYPE
SYNTAX FspR7NoYes
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If enabled then ARP requests for FENDIP (coming in on another interface in the same subnet as FENDIP) will be replied too."
::= { linkDefEntry 6 }
linkDefOspf OBJECT-TYPE
SYNTAX FspR7OspfMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF Routing (Dynamic)"
::= { linkDefEntry 7 }
linkDefBaud OBJECT-TYPE
SYNTAX FspR7Baund
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Baud rate of the serial interface"
::= { linkDefEntry 8 }
linkDefAuthType OBJECT-TYPE
SYNTAX FspR7CpAuthType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF Authentication Type"
::= { linkDefEntry 9 }
linkDefIpType OBJECT-TYPE
SYNTAX FspR7IpType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of IP configuration"
::= { linkDefEntry 10 }
linkDefMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Routing Metric"
::= { linkDefEntry 11 }
linkDefAreaAid OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF Area AID"
::= { linkDefEntry 12 }
linkDefNearEndIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP Address assigned to PPP Termination Point on Near-End NE. Defaults to System IP address"
::= { linkDefEntry 13 }
linkDefBitrate OBJECT-TYPE
SYNTAX Unsigned32 (1..13702)
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum provisioned bit rate for PPP/IP Link of transmitter for an ECC"
::= { linkDefEntry 14 }
linkDefIPv6Type OBJECT-TYPE
SYNTAX FspR7IPv6Type
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of IPv6 configuration"
::= { linkDefEntry 15 }
linkDefNendIPv6 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IPv6 Address assigned to PPP Termination Point on Near-End NE."
::= { linkDefEntry 16 }
linkDefMtu OBJECT-TYPE
SYNTAX Unsigned32 (1280..1500)
UNITS "Byte"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum Transmission Unit"
::= { linkDefEntry 17 }
linkDefHelloInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Hello Interval"
::= { linkDefEntry 18 }
linkDefDeadInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Dead Interval"
::= { linkDefEntry 19 }
linkDefRetransmitInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..3600)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Retransmit Interval"
::= { linkDefEntry 20 }
linkDefFarEndIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP Address assigned to PPP Termination Point on Far-End NE. Default is set by NE System on LINK establishment if FENDIPACPT = Y"
::= { linkDefEntry 21 }
linkDefFendLogicalIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Far End Logical Interface IP"
::= { linkDefEntry 22 }
endOfLinkDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { dcnMgmtDef 2 }
scDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF ScDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "scCapTable"
::= { dcnMgmtDef 3 }
scDefEntry OBJECT-TYPE
SYNTAX ScDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of scCapTable"
INDEX {
entityDcnShelfNo,
entityDcnSlotNo,
entityDcnPortNo,
entityDcnExtNo,
entityDcnClassName
}
::= { scDefTable 1 }
ScDefEntry ::= SEQUENCE
{ scDefRowStatus RowStatus,
scDefType FspR7InterfaceType,
scDefAdmin FspR7AdminState,
scDefAlias SnmpAdminString,
scDefAuthString SnmpAdminString,
scDefOspf FspR7OspfMode,
scDefAuthType FspR7CpAuthType,
scDefIpType FspR7IpType,
scDefMetric Unsigned32,
scDefAreaAid SnmpAdminString,
scDefAlsMode FspR7AlsMode,
scDefSigDegThresReceiver Unsigned32,
scDefAutonegotiation EnableState,
scDefBitrate FspR7Bitrate,
scDefDuplex EthDuplexMode,
scDefAttGradientTh Unsigned32,
scDefIpAddr IpAddress,
scDefLanAid SnmpAdminString,
scDefIpMask IpAddress,
scDefDataLayerPmReset FspR7PmReset,
scDefPriority Unsigned32,
scDefIPv6 SnmpAdminString,
scDefIPv6PrefixLen Unsigned32,
scDefIpMode FspR7IpMode,
scDefGatewayProxyArp FspR7EnableDisable,
scDefMtu Unsigned32,
scDefHelloInterval Unsigned32,
scDefDeadInterval Unsigned32,
scDefRetransmitInterval Unsigned32,
scDefDhcpServer FspR7DhcpServer,
scDefDhcpStartAddr IpAddress,
scDefDhcpStopAddr IpAddress,
scDefDhcpMask IpAddress,
scDefFrcdLogin FspR7EnableDisable,
scDefMdix FspR7InterfaceCrossover }
scDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus object is used to create or delete a row in the table."
::= { scDefEntry 1 }
scDefType OBJECT-TYPE
SYNTAX FspR7InterfaceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload"
::= { scDefEntry 2 }
scDefAdmin OBJECT-TYPE
SYNTAX FspR7AdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted."
::= { scDefEntry 3 }
scDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User Applied Descriptor"
::= { scDefEntry 4 }
scDefAuthString OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF Authentication Key/String depending on Authentication Type"
::= { scDefEntry 5 }
scDefOspf OBJECT-TYPE
SYNTAX FspR7OspfMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF Routing (Dynamic)"
::= { scDefEntry 6 }
scDefAuthType OBJECT-TYPE
SYNTAX FspR7CpAuthType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF Authentication Type"
::= { scDefEntry 7 }
scDefIpType OBJECT-TYPE
SYNTAX FspR7IpType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of IP configuration"
::= { scDefEntry 8 }
scDefMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Routing Metric"
::= { scDefEntry 9 }
scDefAreaAid OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF Area AID"
::= { scDefEntry 10 }
scDefAlsMode OBJECT-TYPE
SYNTAX FspR7AlsMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Determines the reaction in backward direction in response to a LOS
on the same Interface: on a Network Interface connected to the DWDM
this is a matter of laser safety"
::= { scDefEntry 11 }
scDefSigDegThresReceiver OBJECT-TYPE
SYNTAX Unsigned32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Signal Degrade Threshold on Receiver. Reported as ATTRMT-SDHT to far end."
::= { scDefEntry 12 }
scDefAutonegotiation OBJECT-TYPE
SYNTAX EnableState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Auto Negotiation for the data rate"
::= { scDefEntry 13 }
scDefBitrate OBJECT-TYPE
SYNTAX FspR7Bitrate
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Provisioned data rate"
::= { scDefEntry 14 }
scDefDuplex OBJECT-TYPE
SYNTAX EthDuplexMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Duplex Mode (provision), available when Auto Negoiation is Disable (AUTONEG=DISABLE)"
::= { scDefEntry 15 }
scDefAttGradientTh OBJECT-TYPE
SYNTAX Unsigned32 (5..990)
UNITS "0.1 dB/min"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Attenuation Gradient Threshold on Receive Fiber. Applies to both
TRMT and RCV directions; but threshold violation is reported for
each direction separately by the 'tapping' alarms: INTRUDE-RCV
and INTRUDE-TRMT."
::= { scDefEntry 16 }
scDefIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP Address assigned to LAN IP Interface"
::= { scDefEntry 17 }
scDefLanAid OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "AID of LAN"
::= { scDefEntry 18 }
scDefIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP MASK assigned to LAN IP Interface"
::= { scDefEntry 19 }
scDefDataLayerPmReset OBJECT-TYPE
SYNTAX FspR7PmReset
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reset data-layer Performance registers"
::= { scDefEntry 20 }
scDefPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Priority"
::= { scDefEntry 21 }
scDefIPv6 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IPv6 Address"
::= { scDefEntry 22 }
scDefIPv6PrefixLen OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IPv6 Subnet Prefix Length"
::= { scDefEntry 23 }
scDefIpMode OBJECT-TYPE
SYNTAX FspR7IpMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP Mode of Operation either IPv4 only or IPv4 and IPv6. When operation supports IPv6, it is used for addresses external to the network."
::= { scDefEntry 24 }
scDefGatewayProxyArp OBJECT-TYPE
SYNTAX FspR7EnableDisable
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Gateway node serves as an ARP proxy"
::= { scDefEntry 25 }
scDefMtu OBJECT-TYPE
SYNTAX Unsigned32 (1280..1500)
UNITS "Byte"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum Transmission Unit"
::= { scDefEntry 26 }
scDefHelloInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Hello Interval"
::= { scDefEntry 27 }
scDefDeadInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Dead Interval"
::= { scDefEntry 28 }
scDefRetransmitInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..3600)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Retransmit Interval"
::= { scDefEntry 29 }
scDefDhcpServer OBJECT-TYPE
SYNTAX FspR7DhcpServer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Determines DHCP Server/Client mode of the NCU"
::= { scDefEntry 30 }
scDefDhcpStartAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DHCP Start Address"
::= { scDefEntry 31 }
scDefDhcpStopAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DHCP Stop Address"
::= { scDefEntry 32 }
scDefDhcpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DHCP Mask"
::= { scDefEntry 33 }
scDefFrcdLogin OBJECT-TYPE
SYNTAX FspR7EnableDisable
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Directs web browser to the NED login page when enabled and user is not currently logged in."
::= { scDefEntry 34 }
scDefMdix OBJECT-TYPE
SYNTAX FspR7InterfaceCrossover
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Medium-dependent interface crossover"
::= { scDefEntry 35 }
endOfScDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { dcnMgmtDef 4 }
lanDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF LanDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "lanCapTable"
::= { dcnMgmtDef 5 }
lanDefEntry OBJECT-TYPE
SYNTAX LanDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of lanCapTable"
INDEX {
entityDcnShelfNo,
entityDcnSlotNo,
entityDcnPortNo,
entityDcnExtNo,
entityDcnClassName
}
::= { lanDefTable 1 }
LanDefEntry ::= SEQUENCE
{ lanDefRowStatus RowStatus,
lanDefType FspR7InterfaceType,
lanDefAdmin FspR7AdminState,
lanDefAlias SnmpAdminString,
lanDefAuthString SnmpAdminString,
lanDefOspf FspR7OspfMode,
lanDefAuthType FspR7CpAuthType,
lanDefIpType FspR7IpType,
lanDefMetric Unsigned32,
lanDefAreaAid SnmpAdminString,
lanDefIpAddr IpAddress,
lanDefIpMask IpAddress,
lanDefPriority Unsigned32,
lanDefIPv6 SnmpAdminString,
lanDefIPv6PrefixLen Unsigned32,
lanDefIpMode FspR7IpMode,
lanDefMtu Unsigned32,
lanDefHelloInterval Unsigned32,
lanDefDeadInterval Unsigned32,
lanDefRetransmitInterval Unsigned32,
lanDefDhcpServer FspR7DhcpServer,
lanDefDhcpStartAddr IpAddress,
lanDefDhcpStopAddr IpAddress,
lanDefDhcpMask IpAddress,
lanDefFrcdLogin FspR7EnableDisable }
lanDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus object is used to create or delete a row in the table."
::= { lanDefEntry 1 }
lanDefType OBJECT-TYPE
SYNTAX FspR7InterfaceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload"
::= { lanDefEntry 2 }
lanDefAdmin OBJECT-TYPE
SYNTAX FspR7AdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted."
::= { lanDefEntry 3 }
lanDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User Applied Descriptor"
::= { lanDefEntry 4 }
lanDefAuthString OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF Authentication Key/String depending on Authentication Type"
::= { lanDefEntry 5 }
lanDefOspf OBJECT-TYPE
SYNTAX FspR7OspfMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF Routing (Dynamic)"
::= { lanDefEntry 6 }
lanDefAuthType OBJECT-TYPE
SYNTAX FspR7CpAuthType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF Authentication Type"
::= { lanDefEntry 7 }
lanDefIpType OBJECT-TYPE
SYNTAX FspR7IpType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of IP configuration"
::= { lanDefEntry 8 }
lanDefMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Routing Metric"
::= { lanDefEntry 9 }
lanDefAreaAid OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OSPF Area AID"
::= { lanDefEntry 10 }
lanDefIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP Address assigned to LAN IP Interface"
::= { lanDefEntry 11 }
lanDefIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP MASK assigned to LAN IP Interface"
::= { lanDefEntry 12 }
lanDefPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Priority"
::= { lanDefEntry 13 }
lanDefIPv6 OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IPv6 Address"
::= { lanDefEntry 14 }
lanDefIPv6PrefixLen OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IPv6 Subnet Prefix Length"
::= { lanDefEntry 15 }
lanDefIpMode OBJECT-TYPE
SYNTAX FspR7IpMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP Mode of Operation either IPv4 only or IPv4 and IPv6. When operation supports IPv6, it is used for addresses external to the network."
::= { lanDefEntry 16 }
lanDefMtu OBJECT-TYPE
SYNTAX Unsigned32 (1280..1500)
UNITS "Byte"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum Transmission Unit"
::= { lanDefEntry 17 }
lanDefHelloInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Hello Interval"
::= { lanDefEntry 18 }
lanDefDeadInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Dead Interval"
::= { lanDefEntry 19 }
lanDefRetransmitInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..3600)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Retransmit Interval"
::= { lanDefEntry 20 }
lanDefDhcpServer OBJECT-TYPE
SYNTAX FspR7DhcpServer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Determines DHCP Server/Client mode of the NCU"
::= { lanDefEntry 21 }
lanDefDhcpStartAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DHCP Start Address"
::= { lanDefEntry 22 }
lanDefDhcpStopAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DHCP Stop Address"
::= { lanDefEntry 23 }
lanDefDhcpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DHCP Mask"
::= { lanDefEntry 24 }
lanDefFrcdLogin OBJECT-TYPE
SYNTAX FspR7EnableDisable
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Directs web browser to the NED login page when enabled and user is not currently logged in."
::= { lanDefEntry 25 }
endOfLanDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { dcnMgmtDef 6 }
eccDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF EccDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "eccCapTable (Embedded Communication Channel)"
::= { dcnMgmtDef 7 }
eccDefEntry OBJECT-TYPE
SYNTAX EccDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of eccCapTable"
INDEX {
entityDcnShelfNo,
entityDcnSlotNo,
entityDcnPortNo,
entityDcnExtNo,
entityDcnClassName
}
::= { eccDefTable 1 }
EccDefEntry ::= SEQUENCE
{ eccDefRowStatus RowStatus,
eccDefType FspR7InterfaceType,
eccDefAdmin FspR7AdminState,
eccDefAlias SnmpAdminString,
eccDefLanAid SnmpAdminString,
eccDefExternalVid Unsigned32,
eccDefGccUsage FspR7GccUsage }
eccDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus object is used to create or delete a row in the table."
::= { eccDefEntry 1 }
eccDefType OBJECT-TYPE
SYNTAX FspR7InterfaceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload"
::= { eccDefEntry 2 }
eccDefAdmin OBJECT-TYPE
SYNTAX FspR7AdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted."
::= { eccDefEntry 3 }
eccDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User Applied Descriptor"
::= { eccDefEntry 4 }
eccDefLanAid OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "AID of LAN"
::= { eccDefEntry 5 }
eccDefExternalVid OBJECT-TYPE
SYNTAX Unsigned32 (1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "External VID"
::= { eccDefEntry 6 }
eccDefGccUsage OBJECT-TYPE
SYNTAX FspR7GccUsage
MAX-ACCESS read-only
STATUS current
DESCRIPTION "GCC Usage"
::= { eccDefEntry 7 }
endOfEccDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { dcnMgmtDef 8 }
endOfDcnMgmtDef OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { dcnMgmtDef 10000 }
opticalMuxDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF OpticalMuxDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "opticalCapTable"
::= { opticalMuxMgmtDef 1 }
opticalMuxDefEntry OBJECT-TYPE
SYNTAX OpticalMuxDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of opticalCapTable"
INDEX {
entityOpticalMuxShelfNo,
entityOpticalMuxSlotNo,
entityOpticalMuxPortNo,
entityOpticalMuxExtNo,
entityOpticalMuxClassName
}
::= { opticalMuxDefTable 1 }
OpticalMuxDefEntry ::= SEQUENCE
{ opticalMuxDefRowStatus RowStatus,
opticalMuxDefPumpPower Integer32,
opticalMuxDefInhibitSwitchToWork FspR7YesNo,
opticalMuxDefForceLaserOn FspR7RlsAction,
opticalMuxDefAseTabCreation FspR7RlsAction,
opticalMuxDefOpticalSetPoint Integer32,
opticalMuxDefInitiateEqualization FspR7RlsAction,
opticalMuxDefTilt Integer32,
opticalMuxDefOscOpticalSetpoint Integer32,
opticalMuxDefOffset Integer32,
opticalMuxDefSwitchCommand FspR7APSCommand,
opticalMuxDefAlsMode FspR7AlsMode,
opticalMuxDefType FspR7InterfaceType,
opticalMuxDefAttenuationGradient Unsigned32,
opticalMuxDefInhibitSwitchToProt FspR7YesNo,
opticalMuxDefVariableGain Unsigned32,
opticalMuxDefAdmin FspR7AdminState,
opticalMuxDefTimePeriod FspR7OtdrPeriod,
opticalMuxDefSigDegThresReceiver Unsigned32,
opticalMuxDefAlias SnmpAdminString,
opticalMuxDefDataLayerPmReset FspR7PmReset,
opticalMuxDefGain FspR7Gain,
opticalMuxDefEdfaPwrOut FspR7EdfaOutputPowerRating,
opticalMuxDefVoaSetpoint Unsigned32,
opticalMuxDefFiberBrand FspR7FiberBrand,
opticalMuxDefTiltSet FspR7TiltSet,
opticalMuxDefForceFwdAsePilotOn FspR7RlsAction,
opticalMuxDefBandProvision FspR7OpticalBand,
opticalMuxDefOffsetHigh Integer32,
opticalMuxDefOffsetLow Integer32,
opticalMuxDefOptUpdate FspR7RlsAction,
opticalMuxDefVariableGainNtoR Unsigned32,
opticalMuxDefVariableGainRtoN Unsigned32 }
opticalMuxDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus object is used to create or delete a row in the table."
::= { opticalMuxDefEntry 1 }
opticalMuxDefPumpPower OBJECT-TYPE
SYNTAX Integer32 (115..138)
UNITS "0.2 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total raman pump power"
::= { opticalMuxDefEntry 2 }
opticalMuxDefInhibitSwitchToWork OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Inhibit Switch to Working. Inhibition blocks a switchInhibit Switch to Protection facility. Inhibition blocksInhibit Switch to Working. Inhibition blocks a switch
switch to the Protection facility (protection path).Inhibit Switch to Protection facility. Inhibition blocks
switch to the Protection facility (protection path).
to the Working facility (working path).
to the Working facility (working path).
Applicable only for the Working facility in ACT state.
Applicable only for the Working facility in ACT state.
Applicable for the Protection facility in ACT state.
Applicable for the Protection facility in ACT state."
::= { opticalMuxDefEntry 3 }
opticalMuxDefForceLaserOn OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Laser Forced On"
::= { opticalMuxDefEntry 4 }
opticalMuxDefAseTabCreation OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ASE Table creation in process"
::= { opticalMuxDefEntry 5 }
opticalMuxDefOpticalSetPoint OBJECT-TYPE
SYNTAX Integer32 (-250..100)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sets the optical power for power equalization in ROADM or for channel power control in OPCM"
::= { opticalMuxDefEntry 6 }
opticalMuxDefInitiateEqualization OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Initiate Equalization"
::= { opticalMuxDefEntry 7 }
opticalMuxDefTilt OBJECT-TYPE
SYNTAX Integer32 (-50..0)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Change of optical channel power in dB over the complete transmission band"
::= { opticalMuxDefEntry 8 }
opticalMuxDefOscOpticalSetpoint OBJECT-TYPE
SYNTAX Integer32 (-250..50)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sets the OSC optical power"
::= { opticalMuxDefEntry 9 }
opticalMuxDefOffset OBJECT-TYPE
SYNTAX Integer32 (10..30)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sets the offset for the mean optical power for power equalization in ROADM"
::= { opticalMuxDefEntry 10 }
opticalMuxDefSwitchCommand OBJECT-TYPE
SYNTAX FspR7APSCommand
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The switch command action for this facility. A command resulting
in a switch event will also cause a change of the facility secondary state
and a corresponding condition. Addressed by this command is the active port,
the port to switch away from. Since this is a manual switch command, it will
not switch if other port suffers from a signalfailure or a signal degrade."
::= { opticalMuxDefEntry 11 }
opticalMuxDefAlsMode OBJECT-TYPE
SYNTAX FspR7AlsMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Determines the reaction in backward direction in response to a LOS
on the same Interface: on a Network Interface connected to the DWDM
this is a matter of laser safety"
::= { opticalMuxDefEntry 12 }
opticalMuxDefType OBJECT-TYPE
SYNTAX FspR7InterfaceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload"
::= { opticalMuxDefEntry 13 }
opticalMuxDefAttenuationGradient OBJECT-TYPE
SYNTAX Unsigned32 (5..990)
UNITS "0.1 dB/min"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Attenuation Gradient Threshold on Receive Fiber. Applies to both TRMT and RCV directions; but threshold violation is reported for each direction separately by the 'tapping' alarms: INTRUDE-RCV and INTRUDE-TRMT."
::= { opticalMuxDefEntry 14 }
opticalMuxDefInhibitSwitchToProt OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Inhibit Switch to Working. Inhibition blocks a switchInhibit Switch to Protection facility. Inhibition blocksInhibit Switch to Working. Inhibition blocks a switch"
::= { opticalMuxDefEntry 15 }
opticalMuxDefVariableGain OBJECT-TYPE
SYNTAX Unsigned32 (0..350)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Variable Gain of EDFA"
::= { opticalMuxDefEntry 16 }
opticalMuxDefAdmin OBJECT-TYPE
SYNTAX FspR7AdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted."
::= { opticalMuxDefEntry 17 }
opticalMuxDefTimePeriod OBJECT-TYPE
SYNTAX FspR7OtdrPeriod
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NONE - OTDR measurement disabled otherwise the OTDR duration in minutes."
::= { opticalMuxDefEntry 18 }
opticalMuxDefSigDegThresReceiver OBJECT-TYPE
SYNTAX Unsigned32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Signal Degrade Threshold on Receiver. Reported as ATTRMT-SDHT to far end."
::= { opticalMuxDefEntry 19 }
opticalMuxDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User Applied Descriptor"
::= { opticalMuxDefEntry 20 }
opticalMuxDefDataLayerPmReset OBJECT-TYPE
SYNTAX FspR7PmReset
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reset data-layer Performance registers"
::= { opticalMuxDefEntry 21 }
opticalMuxDefGain OBJECT-TYPE
SYNTAX FspR7Gain
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Gain"
::= { opticalMuxDefEntry 22 }
opticalMuxDefEdfaPwrOut OBJECT-TYPE
SYNTAX FspR7EdfaOutputPowerRating
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Optical Output Power Rating - Provision"
::= { opticalMuxDefEntry 23 }
opticalMuxDefVoaSetpoint OBJECT-TYPE
SYNTAX Unsigned32 (0..300)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sets the optical attenuation of VOA"
::= { opticalMuxDefEntry 24 }
opticalMuxDefFiberBrand OBJECT-TYPE
SYNTAX FspR7FiberBrand
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Brand of fiber present in the fiber plant"
::= { opticalMuxDefEntry 25 }
opticalMuxDefTiltSet OBJECT-TYPE
SYNTAX FspR7TiltSet
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tilt setting as discrete values versus a range"
::= { opticalMuxDefEntry 26 }
opticalMuxDefForceFwdAsePilotOn OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Force the BWD Raman pilot on to allow building of FWD Raman ASE Table"
::= { opticalMuxDefEntry 27 }
opticalMuxDefBandProvision OBJECT-TYPE
SYNTAX FspR7OpticalBand
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Band Provision. Reference to BAND__INVENTORY."
::= { opticalMuxDefEntry 28 }
opticalMuxDefOffsetHigh OBJECT-TYPE
SYNTAX Integer32 (-250..210)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sets the high level offset for power equalization in CCM"
::= { opticalMuxDefEntry 29 }
opticalMuxDefOffsetLow OBJECT-TYPE
SYNTAX Integer32 (-250..210)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sets the low level offset for power equalization in CCM"
::= { opticalMuxDefEntry 30 }
opticalMuxDefOptUpdate OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This parameter is used to operate/trigger OPT PM update; it triggers the entity to update its current OPT PM value, which can be retrieved via GET function."
::= { opticalMuxDefEntry 31 }
opticalMuxDefVariableGainNtoR OBJECT-TYPE
SYNTAX Unsigned32 (0..350)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Variable Gain of EDFA (N to R)"
::= { opticalMuxDefEntry 32 }
opticalMuxDefVariableGainRtoN OBJECT-TYPE
SYNTAX Unsigned32 (0..350)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Variable Gain of EDFA (R to N)"
::= { opticalMuxDefEntry 33 }
endOfOpticalMuxDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { opticalMuxMgmtDef 2 }
endOfOpticalMuxMgmtDef OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { opticalMuxMgmtDef 10000 }
shelfConnDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF ShelfConnDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "shelfConnCapTable"
::= { shelfConnMgmtDef 1 }
shelfConnDefEntry OBJECT-TYPE
SYNTAX ShelfConnDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of shelfConnCapTable"
INDEX {
entityShelfConnShelfNo,
entityShelfConnSlotNo,
entityShelfConnPortNo,
entityShelfConnExtNo,
entityShelfConnClassName
}
::= { shelfConnDefTable 1 }
ShelfConnDefEntry ::= SEQUENCE
{ shelfConnDefRowStatus RowStatus,
shelfConnDefAdmin FspR7AdminState,
shelfConnDefAlias SnmpAdminString,
shelfConnDefFacilityType FspR7InterfaceType,
shelfConnDefDataLayerPmReset FspR7PmReset,
shelfConnDefAutonegotiation EnableState,
shelfConnDefBitrate FspR7Bitrate,
shelfConnDefDuplex EthDuplexMode,
shelfConnDefMdix FspR7InterfaceCrossover }
shelfConnDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus object is used to create or delete a row in the table."
::= { shelfConnDefEntry 1 }
shelfConnDefAdmin OBJECT-TYPE
SYNTAX FspR7AdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted."
::= { shelfConnDefEntry 2 }
shelfConnDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User Applied Descriptor"
::= { shelfConnDefEntry 3 }
shelfConnDefFacilityType OBJECT-TYPE
SYNTAX FspR7InterfaceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload"
::= { shelfConnDefEntry 4 }
shelfConnDefDataLayerPmReset OBJECT-TYPE
SYNTAX FspR7PmReset
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reset data-layer Performance registers"
::= { shelfConnDefEntry 5 }
shelfConnDefAutonegotiation OBJECT-TYPE
SYNTAX EnableState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Auto Negotiation for the data rate"
::= { shelfConnDefEntry 6 }
shelfConnDefBitrate OBJECT-TYPE
SYNTAX FspR7Bitrate
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Provisioned data rate"
::= { shelfConnDefEntry 7 }
shelfConnDefDuplex OBJECT-TYPE
SYNTAX EthDuplexMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Duplex Mode (provision), available when Auto Negoiation is Disable (AUTONEG=DISABLE)"
::= { shelfConnDefEntry 8 }
shelfConnDefMdix OBJECT-TYPE
SYNTAX FspR7InterfaceCrossover
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Medium-dependent interface crossover"
::= { shelfConnDefEntry 9 }
endOfShelfConnDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { shelfConnMgmtDef 2 }
endOfShelfConnMgmtDef OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { shelfConnMgmtDef 10000 }
envPortDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF EnvPortDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "envPortCapTable"
::= { envMgmtDef 1 }
envPortDefEntry OBJECT-TYPE
SYNTAX EnvPortDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of envPortCapTable"
INDEX {
entityEqptShelfNo,
entityEqptSlotNo,
entityEqptPortNo,
entityEqptExtNo,
entityEqptClassName
}
::= { envPortDefTable 1 }
EnvPortDefEntry ::= SEQUENCE
{ envPortDefRowStatus RowStatus,
envPortDefTelemetry FspR7TelemetryOutput,
envPortDefFacilityType FspR7InterfaceType,
envPortDefTifAlarmType SnmpAdminString,
envPortDefTifAlarmMessage SnmpAdminString,
envPortDefInvertTifInputLogic FspR7InvertTelemetryInputLogic }
envPortDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus object is used to create or delete a row in the table."
::= { envPortDefEntry 1 }
envPortDefTelemetry OBJECT-TYPE
SYNTAX FspR7TelemetryOutput
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Telemetry interface output provision"
::= { envPortDefEntry 2 }
envPortDefFacilityType OBJECT-TYPE
SYNTAX FspR7InterfaceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload"
::= { envPortDefEntry 3 }
envPortDefTifAlarmType OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Telemetry interface alarm type"
::= { envPortDefEntry 4 }
envPortDefTifAlarmMessage OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Telemetry interface alarm message"
::= { envPortDefEntry 5 }
envPortDefInvertTifInputLogic OBJECT-TYPE
SYNTAX FspR7InvertTelemetryInputLogic
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Change telemetry interface input logic"
::= { envPortDefEntry 6 }
endOfEnvPortDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { envMgmtDef 2 }
endOfEnvMgmtDef OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { envMgmtDef 10000 }
containerDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF ContainerDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "containerCapTable"
::= { containerMgmtDef 1 }
containerDefEntry OBJECT-TYPE
SYNTAX ContainerDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of containerCapTable"
INDEX {
entityContainerShelfNo,
entityContainerSlotNo,
entityContainerPortNo,
entityContainerExtNo,
entityContainerClassName
}
::= { containerDefTable 1 }
ContainerDefEntry ::= SEQUENCE
{ containerDefRowStatus RowStatus,
containerDefFacilityType FspR7InterfaceType }
containerDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus object is used to create or delete a row in the table."
::= { containerDefEntry 1 }
containerDefFacilityType OBJECT-TYPE
SYNTAX FspR7InterfaceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload"
::= { containerDefEntry 2 }
endOfContainerDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { containerMgmtDef 2 }
endOfContainerMgmtDef OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { containerMgmtDef 10000 }
opticalLineDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF OpticalLineDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "opticalLineCapTable"
::= { opticalLineMgmtDef 1 }
opticalLineDefEntry OBJECT-TYPE
SYNTAX OpticalLineDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of opticalLineCapTable"
INDEX {
entityOptLineIndexNo1,
entityOptLineIndexNo1,
entityOptLineIndexNo1,
entityOptLineIndexNo1,
entityOptLineClassName
}
::= { opticalLineDefTable 1 }
OpticalLineDefEntry ::= SEQUENCE
{ opticalLineDefRowStatus RowStatus,
opticalLineDefTxLineAttenuation Integer32,
opticalLineDefRxLineAttenuation Integer32,
opticalLineDefAlias SnmpAdminString,
opticalLineDefFarEndLocation SnmpAdminString,
opticalLineDefFiberLength Unsigned32,
opticalLineDefChannelBandwith FspR7ChannelBandwidth }
opticalLineDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus object is used to create or delete a row in the table."
::= { opticalLineDefEntry 1 }
opticalLineDefTxLineAttenuation OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Attenuation (in 0.1 dB) on line connected to
transmitter of this interface. If there is loss of signal
then line attenuation is -65535. The value -255 will be
returned if the value isn't available."
::= { opticalLineDefEntry 2 }
opticalLineDefRxLineAttenuation OBJECT-TYPE
SYNTAX Integer32
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Attenuation (in 0.1 dB) on line connected to receiver
of this interface. If there is loss of signal then ine
attenuation is -65535. The value -255 will be returned if
the value isn't available."
::= { opticalLineDefEntry 3 }
opticalLineDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User Applied Descriptor"
::= { opticalLineDefEntry 4 }
opticalLineDefFarEndLocation OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "FEND Location"
::= { opticalLineDefEntry 5 }
opticalLineDefFiberLength OBJECT-TYPE
SYNTAX Unsigned32 (0..10000)
UNITS "km"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Fiber length between 2 remote NEs"
::= { opticalLineDefEntry 6 }
opticalLineDefChannelBandwith OBJECT-TYPE
SYNTAX FspR7ChannelBandwidth
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Channel Bandwidth"
::= { opticalLineDefEntry 7 }
endOfOpticalLineDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { opticalLineMgmtDef 2 }
endOfOpticalLineMgmtDef OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { opticalLineMgmtDef 10000 }
optThresholdConfigDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF OptThresholdConfigDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "optThresholdConfigCapTable"
::= { performanceFacilityThresholdDef 1 }
optThresholdConfigDefEntry OBJECT-TYPE
SYNTAX OptThresholdConfigDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of optThresholdConfigCapTable"
INDEX {
entityFacilityShelfNo,
entityFacilitySlotNo,
entityFacilityPortNo,
entityFacilityExtNo,
entityFacilityClassName
}
::= { optThresholdConfigDefTable 1 }
OptThresholdConfigDefEntry ::= SEQUENCE
{ optThresholdConfigDefLowConfig Integer32,
optThresholdConfigDefHighConfig Integer32 }
optThresholdConfigDefLowConfig OBJECT-TYPE
SYNTAX Integer32 (-500..300)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Configurable threshold of the Optical Power Transmitted (output)"
::= { optThresholdConfigDefEntry 1 }
optThresholdConfigDefHighConfig OBJECT-TYPE
SYNTAX Integer32 (-500..300)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Configurable high threshold of the Optical Power Transmitted (output)"
::= { optThresholdConfigDefEntry 2 }
oprThresholdConfigDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF OprThresholdConfigDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "oprThresholdConfigCapTable"
::= { performanceFacilityThresholdDef 2 }
oprThresholdConfigDefEntry OBJECT-TYPE
SYNTAX OprThresholdConfigDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of oprThresholdConfigCapTable"
INDEX {
entityFacilityShelfNo,
entityFacilitySlotNo,
entityFacilityPortNo,
entityFacilityExtNo,
entityFacilityClassName
}
::= { oprThresholdConfigDefTable 1 }
OprThresholdConfigDefEntry ::= SEQUENCE
{ oprThresholdConfigDefLowConfig Integer32,
oprThresholdConfigDefHighConfig Integer32 }
oprThresholdConfigDefLowConfig OBJECT-TYPE
SYNTAX Integer32 (-450..260)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Optical Input Power Received"
::= { oprThresholdConfigDefEntry 1 }
oprThresholdConfigDefHighConfig OBJECT-TYPE
SYNTAX Integer32 (-450..270)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Optical Input Power Received"
::= { oprThresholdConfigDefEntry 2 }
endOfOprThresholdConfigDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { performanceFacilityThresholdDef 3 }
endOfPerformanceFacilityThresholdDef OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { performanceFacilityThresholdDef 10000 }
terminationPointDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF TerminationPointDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "terminationPointCapTable"
::= { fiberMapDef 1 }
terminationPointDefEntry OBJECT-TYPE
SYNTAX TerminationPointDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of terminationPointCapTable"
INDEX {
entityTerminPointIndexNo1,
entityTerminPointIndexNo2,
entityTerminPointIndexNo3,
entityTerminPointIndexNo4,
entityTerminPointClassName
}
::= { terminationPointDefTable 1 }
TerminationPointDefEntry ::= SEQUENCE
{ terminationPointDefRowStatus RowStatus,
terminationPointDefAdmin FspR7AdminState,
terminationPointDefFiberDetect FspR7EnableDisable,
terminationPointDefAlias SnmpAdminString }
terminationPointDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Physical Termination Point Capability RowStatus."
::= { terminationPointDefEntry 1 }
terminationPointDefAdmin OBJECT-TYPE
SYNTAX FspR7AdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Physical Termination Point Capability Adminstrative State."
::= { terminationPointDefEntry 2 }
terminationPointDefFiberDetect OBJECT-TYPE
SYNTAX FspR7EnableDisable
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Physical Termination Point Capability Fiber Detect."
::= { terminationPointDefEntry 3 }
terminationPointDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Physical Termination Point Capabillity Alias."
::= { terminationPointDefEntry 4 }
connectionDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF ConnectionDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "connectionCapTable"
::= { fiberMapDef 2 }
connectionDefEntry OBJECT-TYPE
SYNTAX ConnectionDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of connectionCapTable"
INDEX {
entityTerminPointIndexNo1,
entityTerminPointIndexNo2,
entityTerminPointIndexNo3,
entityTerminPointIndexNo4,
entityTerminPointClassName,
entityTerminPointIndexNo1,
entityTerminPointIndexNo2,
entityTerminPointIndexNo3,
entityTerminPointIndexNo4,
entityTerminPointClassName,
entityConnectionClassName
}
::= { connectionDefTable 1 }
ConnectionDefEntry ::= SEQUENCE
{ connectionDefRowStatus FspR7RowStatus,
connectionDefType FspR7TypeConnection }
connectionDefRowStatus OBJECT-TYPE
SYNTAX FspR7RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Physical Connection Default RowStatus."
::= { connectionDefEntry 1 }
connectionDefType OBJECT-TYPE
SYNTAX FspR7TypeConnection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Physical Connection Default Type."
::= { connectionDefEntry 2 }
endOfConnectionDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { fiberMapDef 3 }
endOfFiberMapDef OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { fiberMapDef 10000 }
externalPortDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExternalPortDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "externalPortDef"
::= { eciDef 1 }
externalPortDefEntry OBJECT-TYPE
SYNTAX ExternalPortDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of externalPortDef"
INDEX {
entityExternalPortShelfNo,
entityExternalPortSlotNo,
entityExternalPortPortNo,
entityExternalPortExtNo,
entityExternalPortClassName
}
::= { externalPortDefTable 1 }
ExternalPortDefEntry ::= SEQUENCE
{ externalPortDefRowStatus FspR7RowStatus,
externalPortDefType FspR7InterfaceType,
externalPortDefTransmitChannel FspR7ChannelIdentifier,
externalPortDefChannelBandwith FspR7ChannelBandwidth,
externalPortDefAlias SnmpAdminString,
externalPortDefFarEndLocation SnmpAdminString,
externalPortDefBitrate Unsigned32,
externalPortDefFecType FspR7FecType,
externalPortDefLineCoding FspR7LineCoding,
externalPortDefFrameFormat FspR7FrameFormat,
externalPortDefOpticalPowerTx Integer32,
externalPortDefOsnrTransmit Unsigned32,
externalPortDefPmdTransmit Unsigned32,
externalPortDefChromDisperTx Integer32,
externalPortDefMinOsnrRcv Unsigned32,
externalPortDefMinOptPowerRcv Integer32,
externalPortDefMaxOptPowerRcv Integer32,
externalPortDefMaxPmdRcv Unsigned32,
externalPortDefMinChromDisperRcv Integer32,
externalPortDefMaxChromDisperRcv Integer32,
externalPortDefMaxBitErrorRate FspR7MaxBitErrorRate,
externalPortDefSourceProfile SnmpAdminString }
externalPortDefRowStatus OBJECT-TYPE
SYNTAX FspR7RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus"
::= { externalPortDefEntry 1 }
externalPortDefType OBJECT-TYPE
SYNTAX FspR7InterfaceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 2 }
externalPortDefTransmitChannel OBJECT-TYPE
SYNTAX FspR7ChannelIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 3 }
externalPortDefChannelBandwith OBJECT-TYPE
SYNTAX FspR7ChannelBandwidth
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 4 }
externalPortDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 5 }
externalPortDefFarEndLocation OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 6 }
externalPortDefBitrate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Mbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 7 }
externalPortDefFecType OBJECT-TYPE
SYNTAX FspR7FecType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 8 }
externalPortDefLineCoding OBJECT-TYPE
SYNTAX FspR7LineCoding
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 9 }
externalPortDefFrameFormat OBJECT-TYPE
SYNTAX FspR7FrameFormat
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 10 }
externalPortDefOpticalPowerTx OBJECT-TYPE
SYNTAX Integer32 (-9900..600)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 11 }
externalPortDefOsnrTransmit OBJECT-TYPE
SYNTAX Unsigned32 (0..58)
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 12 }
externalPortDefPmdTransmit OBJECT-TYPE
SYNTAX Unsigned32 (0..30)
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 13 }
externalPortDefChromDisperTx OBJECT-TYPE
SYNTAX Integer32 (-60000..60000)
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 14 }
externalPortDefMinOsnrRcv OBJECT-TYPE
SYNTAX Unsigned32 (10..58)
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 15 }
externalPortDefMinOptPowerRcv OBJECT-TYPE
SYNTAX Integer32 (-2500..1000)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 16 }
externalPortDefMaxOptPowerRcv OBJECT-TYPE
SYNTAX Integer32 (-2500..1000)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 17 }
externalPortDefMaxPmdRcv OBJECT-TYPE
SYNTAX Unsigned32 (0..30)
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 18 }
externalPortDefMinChromDisperRcv OBJECT-TYPE
SYNTAX Integer32 (-60000..60000)
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 19 }
externalPortDefMaxChromDisperRcv OBJECT-TYPE
SYNTAX Integer32 (-60000..60000)
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 20 }
externalPortDefMaxBitErrorRate OBJECT-TYPE
SYNTAX FspR7MaxBitErrorRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 21 }
externalPortDefSourceProfile OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalPortDefEntry 22 }
endOfExternalPortDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { eciDef 2 }
externalOmDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExternalOmDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "externalOmDef"
::= { eciDef 3 }
externalOmDefEntry OBJECT-TYPE
SYNTAX ExternalOmDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of externalOmDef"
INDEX {
entityExternalPortShelfNo,
entityExternalPortSlotNo,
entityExternalPortPortNo,
entityExternalPortExtNo,
entityExternalPortClassName
}
::= { externalOmDefTable 1 }
ExternalOmDefEntry ::= SEQUENCE
{ externalOmDefRowStatus FspR7RowStatus,
externalOmDefType FspR7InterfaceType,
externalOmDefHostName SnmpAdminString }
externalOmDefRowStatus OBJECT-TYPE
SYNTAX FspR7RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus"
::= { externalOmDefEntry 1 }
externalOmDefType OBJECT-TYPE
SYNTAX FspR7InterfaceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload"
::= { externalOmDefEntry 2 }
externalOmDefHostName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Host Device Name"
::= { externalOmDefEntry 3 }
externalVchDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExternalVchDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "externalVchDef"
::= { eciDef 5 }
externalVchDefEntry OBJECT-TYPE
SYNTAX ExternalVchDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of externalVchDef"
INDEX {
entityExternalPortShelfNo,
entityExternalPortSlotNo,
entityExternalPortPortNo,
entityExternalPortExtNo,
entityExternalPortClassName
}
::= { externalVchDefTable 1 }
ExternalVchDefEntry ::= SEQUENCE
{ externalVchDefRowStatus FspR7RowStatus,
externalVchDefType FspR7InterfaceType,
externalVchDefTransmitChannel FspR7ChannelIdentifier,
externalVchDefChannelBandwith FspR7ChannelBandwidth,
externalVchDefAlias SnmpAdminString,
externalVchDefFarEndLocation SnmpAdminString,
externalVchDefBitrate Unsigned32,
externalVchDefFecType FspR7FecType,
externalVchDefLineCoding FspR7LineCoding,
externalVchDefFrameFormat FspR7FrameFormat,
externalVchDefOpticalPowerTx Integer32,
externalVchDefOsnrTransmit Unsigned32,
externalVchDefPmdTransmit Unsigned32,
externalVchDefChromDisperTx Integer32,
externalVchDefMinOsnrRcv Unsigned32,
externalVchDefMinOptPowerRcv Integer32,
externalVchDefMaxOptPowerRcv Integer32,
externalVchDefMaxPmdRcv Unsigned32,
externalVchDefMinChromDisperRcv Integer32,
externalVchDefMaxChromDisperRcv Integer32,
externalVchDefMaxBitErrorRate FspR7MaxBitErrorRate,
externalVchDefSourceProfile SnmpAdminString }
externalVchDefRowStatus OBJECT-TYPE
SYNTAX FspR7RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus"
::= { externalVchDefEntry 1 }
externalVchDefType OBJECT-TYPE
SYNTAX FspR7InterfaceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 2 }
externalVchDefTransmitChannel OBJECT-TYPE
SYNTAX FspR7ChannelIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 3 }
externalVchDefChannelBandwith OBJECT-TYPE
SYNTAX FspR7ChannelBandwidth
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 4 }
externalVchDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 5 }
externalVchDefFarEndLocation OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 6 }
externalVchDefBitrate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Mbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 7 }
externalVchDefFecType OBJECT-TYPE
SYNTAX FspR7FecType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 8 }
externalVchDefLineCoding OBJECT-TYPE
SYNTAX FspR7LineCoding
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 9 }
externalVchDefFrameFormat OBJECT-TYPE
SYNTAX FspR7FrameFormat
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 10 }
externalVchDefOpticalPowerTx OBJECT-TYPE
SYNTAX Integer32 (-9900..600)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 11 }
externalVchDefOsnrTransmit OBJECT-TYPE
SYNTAX Unsigned32 (0..58)
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 12 }
externalVchDefPmdTransmit OBJECT-TYPE
SYNTAX Unsigned32 (0..30)
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 13 }
externalVchDefChromDisperTx OBJECT-TYPE
SYNTAX Integer32 (-60000..60000)
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 14 }
externalVchDefMinOsnrRcv OBJECT-TYPE
SYNTAX Unsigned32 (10..58)
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 15 }
externalVchDefMinOptPowerRcv OBJECT-TYPE
SYNTAX Integer32 (-2500..1000)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 16 }
externalVchDefMaxOptPowerRcv OBJECT-TYPE
SYNTAX Integer32 (-2500..1000)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 17 }
externalVchDefMaxPmdRcv OBJECT-TYPE
SYNTAX Unsigned32 (0..30)
UNITS "ps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 18 }
externalVchDefMinChromDisperRcv OBJECT-TYPE
SYNTAX Integer32 (-60000..60000)
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 19 }
externalVchDefMaxChromDisperRcv OBJECT-TYPE
SYNTAX Integer32 (-60000..60000)
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 20 }
externalVchDefMaxBitErrorRate OBJECT-TYPE
SYNTAX FspR7MaxBitErrorRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 21 }
externalVchDefSourceProfile OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "."
::= { externalVchDefEntry 22 }
endOfEciDef OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { eciDef 10000 }
changePhysicalPortServiceDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF ChangePhysicalPortServiceDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
::= { changeServiceDef 1 }
changePhysicalPortServiceDefEntry OBJECT-TYPE
SYNTAX ChangePhysicalPortServiceDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
INDEX {
entityFacilityShelfNo,
entityFacilitySlotNo,
entityFacilityPortNo,
entityFacilityExtNo,
entityFacilityClassName
}
::= { changePhysicalPortServiceDefTable 1 }
ChangePhysicalPortServiceDefEntry ::= SEQUENCE
{ changePhysicalPortServiceDefRowStatus RowStatus,
changePhysicalPortServiceDefType FspR7InterfaceType,
changePhysicalPortServiceDefAdmin FspR7AdminState,
changePhysicalPortServiceDefAlias SnmpAdminString,
changePhysicalPortServiceDefAlsMode FspR7AlsMode,
changePhysicalPortServiceDefBehaviour FspR7PortBehaviour,
changePhysicalPortServiceDefDispersionSetting Integer32,
changePhysicalPortServiceDefDispersionMode FspR7DispersionModes,
changePhysicalPortServiceDefChannelProv FspR7ChannelIdentifier,
changePhysicalPortServiceDefWdmRxChannel FspR7ChannelIdentifier,
changePhysicalPortServiceDefCodeGain FspR7CodeGain,
changePhysicalPortServiceDefXfpDecisionThres FspR7XfpDecisionThres,
changePhysicalPortServiceDefDisparityCorrection EnableState,
changePhysicalPortServiceDefEqlzAdmin FspR7EnableDisable,
changePhysicalPortServiceDefErrorForwarding FspR7ErrorFwdMode,
changePhysicalPortServiceDefFecType FspR7FecType,
changePhysicalPortServiceDefFarEndCommunication FspR7YesNo,
changePhysicalPortServiceDefFlowControl FspR7FlowControlMode,
changePhysicalPortServiceDefLaneChannelSetting FspR7ChannelIdentifier,
changePhysicalPortServiceDefLaserDelayTimer FspR7LaserDelayTimer,
changePhysicalPortServiceDefLaserOffTimer Unsigned32,
changePhysicalPortServiceDefLaserOnTimer Unsigned32,
changePhysicalPortServiceDefLaserOffDelayFunction EnableState,
changePhysicalPortServiceDefAutoPTassignment FspR7ManualAuto,
changePhysicalPortServiceDefTributarySlotMethod FspR7ManualAuto,
changePhysicalPortServiceDefOpticalSetPoint Integer32,
changePhysicalPortServiceDefOpuPayloadType FspR7OpuPayloadType,
changePhysicalPortServiceDefSigDegThresSonetLine FspR7BERThreshold,
changePhysicalPortServiceDefSigDegThresSdhMs Unsigned32,
changePhysicalPortServiceDefSigDegThresOtu Integer32,
changePhysicalPortServiceDefSigDegThresOdu Integer32,
changePhysicalPortServiceDefSigDegThreshold Unsigned32,
changePhysicalPortServiceDefSigDegPcslThreshold Unsigned32,
changePhysicalPortServiceDefSigDegThresSonetSection FspR7BERThreshold,
changePhysicalPortServiceDefSigDegThresSdhSection Unsigned32,
changePhysicalPortServiceDefSigDegThresOduTcmA Integer32,
changePhysicalPortServiceDefSigDegThresOduTcmB Integer32,
changePhysicalPortServiceDefSigDegThresOduTcmC Integer32,
changePhysicalPortServiceDefSignalDegradePeriod Unsigned32,
changePhysicalPortServiceDefSigDegPeriodOdu Unsigned32,
changePhysicalPortServiceDefSigDegPeriodOtu Unsigned32,
changePhysicalPortServiceDefSigDegPeriodIntegration Unsigned32,
changePhysicalPortServiceDefSigDegPeriodSdhSection Unsigned32,
changePhysicalPortServiceDefSigDegPeriodOduTcmA Unsigned32,
changePhysicalPortServiceDefSigDegPeriodOduTcmB Unsigned32,
changePhysicalPortServiceDefSigDegPeriodOduTcmC Unsigned32,
changePhysicalPortServiceDefOtnStuffing FspR7YesNo,
changePhysicalPortServiceDefTcmALevel OtnTcmLevel,
changePhysicalPortServiceDefTcmBLevel OtnTcmLevel,
changePhysicalPortServiceDefTcmCLevel OtnTcmLevel,
changePhysicalPortServiceDefTerminationLevel OhTerminationLevel,
changePhysicalPortServiceDefTimingSource SonetTimingSource,
changePhysicalPortServiceDefTimModeOdu TimMode,
changePhysicalPortServiceDefTimModeOtu TimMode,
changePhysicalPortServiceDefTimModeSonetSection TimMode,
changePhysicalPortServiceDefTimModeOduTcmA TimMode,
changePhysicalPortServiceDefTimModeOduTcmB TimMode,
changePhysicalPortServiceDefTimModeOduTcmC TimMode,
changePhysicalPortServiceDefTraceFormSonetSection SonetTraceForm,
changePhysicalPortServiceDefTraceExpectedSonetSection OCTET STRING,
changePhysicalPortServiceDefTraceTransmitSonetSection OCTET STRING,
changePhysicalPortServiceDefTraceExpectedOtu OCTET STRING,
changePhysicalPortServiceDefTraceTransmitSapiOtu OCTET STRING,
changePhysicalPortServiceDefTraceTransmitDapiOtu OCTET STRING,
changePhysicalPortServiceDefTraceTransmitOpspOtu OCTET STRING,
changePhysicalPortServiceDefTraceExpectedOdu OCTET STRING,
changePhysicalPortServiceDefTraceTransmitSapiOdu OCTET STRING,
changePhysicalPortServiceDefTraceTransmitDapiOdu OCTET STRING,
changePhysicalPortServiceDefTraceTransmitOpspOdu OCTET STRING,
changePhysicalPortServiceDefTraceExpectedOduTcmA OCTET STRING,
changePhysicalPortServiceDefTraceTransmitSapiOduTcmA OCTET STRING,
changePhysicalPortServiceDefTraceTransmitDapiOduTcmA OCTET STRING,
changePhysicalPortServiceDefTraceTransmitOpspOduTcmA OCTET STRING,
changePhysicalPortServiceDefTraceExpectedOduTcmB OCTET STRING,
changePhysicalPortServiceDefTraceTransmitSapiOduTcmB OCTET STRING,
changePhysicalPortServiceDefTraceTransmitDapiOduTcmB OCTET STRING,
changePhysicalPortServiceDefTraceTransmitOpspOduTcmB OCTET STRING,
changePhysicalPortServiceDefTraceExpectedOduTcmC OCTET STRING,
changePhysicalPortServiceDefTraceTransmitSapiOduTcmC OCTET STRING,
changePhysicalPortServiceDefTraceTransmitDapiOduTcmC OCTET STRING,
changePhysicalPortServiceDefTraceTransmitOpspOduTcmC OCTET STRING,
changePhysicalPortServiceDefTxOffDelay FspR7EnableDisable,
changePhysicalPortServiceDefVoaMode FspR7VoaMode,
changePhysicalPortServiceDefVoaSetpoint Unsigned32,
changePhysicalPortServiceDefMode FspR7TransmissionMode,
changePhysicalPortServiceDefMonLevel FspR7MonLevel,
changePhysicalPortServiceDefOptimize FspR7Optimize,
changePhysicalPortServiceDefLinkSetup FspR7DisableEnable,
changePhysicalPortServiceDefChannelSpacing FspR7ChannelSpacing }
changePhysicalPortServiceDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus object is used to create or delete a row in the table."
::= { changePhysicalPortServiceDefEntry 1 }
changePhysicalPortServiceDefType OBJECT-TYPE
SYNTAX FspR7InterfaceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The TYPE defines the transport service type as wrapper with wrapper layer termination OR else as payload"
::= { changePhysicalPortServiceDefEntry 2 }
changePhysicalPortServiceDefAdmin OBJECT-TYPE
SYNTAX FspR7AdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Administrative State is displayed in the GUI and Craft. Transition to Unassigend requires the entity to be deleted."
::= { changePhysicalPortServiceDefEntry 3 }
changePhysicalPortServiceDefAlias OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User Applied Descriptor"
::= { changePhysicalPortServiceDefEntry 4 }
changePhysicalPortServiceDefAlsMode OBJECT-TYPE
SYNTAX FspR7AlsMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Determines the reaction in backward direction in response to a LOS
on the same Interface: on a Network Interface connected to the DWDM
this is a matter of laser safety"
::= { changePhysicalPortServiceDefEntry 5 }
changePhysicalPortServiceDefBehaviour OBJECT-TYPE
SYNTAX FspR7PortBehaviour
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Behavior or Port usage based on configuration/usage in the system regardless of faceplate designation"
::= { changePhysicalPortServiceDefEntry 6 }
changePhysicalPortServiceDefDispersionSetting OBJECT-TYPE
SYNTAX Integer32 (-50000..50000)
UNITS "ps/nm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Chromatic Dispersion Compensation setting on module"
::= { changePhysicalPortServiceDefEntry 7 }
changePhysicalPortServiceDefDispersionMode OBJECT-TYPE
SYNTAX FspR7DispersionModes
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Chromatic Dispersion Compensation Mode"
::= { changePhysicalPortServiceDefEntry 8 }
changePhysicalPortServiceDefChannelProv OBJECT-TYPE
SYNTAX FspR7ChannelIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Channel"
::= { changePhysicalPortServiceDefEntry 9 }
changePhysicalPortServiceDefWdmRxChannel OBJECT-TYPE
SYNTAX FspR7ChannelIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Channel Number for the Receive Interface"
::= { changePhysicalPortServiceDefEntry 10 }
changePhysicalPortServiceDefCodeGain OBJECT-TYPE
SYNTAX FspR7CodeGain
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Forward Error Correction Coding gain"
::= { changePhysicalPortServiceDefEntry 11 }
changePhysicalPortServiceDefXfpDecisionThres OBJECT-TYPE
SYNTAX FspR7XfpDecisionThres
MAX-ACCESS read-only
STATUS current
DESCRIPTION "XFP Decision threshold setting"
::= { changePhysicalPortServiceDefEntry 12 }
changePhysicalPortServiceDefDisparityCorrection OBJECT-TYPE
SYNTAX EnableState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Disparity correction"
::= { changePhysicalPortServiceDefEntry 13 }
changePhysicalPortServiceDefEqlzAdmin OBJECT-TYPE
SYNTAX FspR7EnableDisable
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Scheduled Equalization Administration"
::= { changePhysicalPortServiceDefEntry 14 }
changePhysicalPortServiceDefErrorForwarding OBJECT-TYPE
SYNTAX FspR7ErrorFwdMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Determines the reaction in forward direction in response to a LOS on
the interface on the opposite side of the module: may override
this behaviour in the interests of laser safety."
::= { changePhysicalPortServiceDefEntry 15 }
changePhysicalPortServiceDefFecType OBJECT-TYPE
SYNTAX FspR7FecType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Forward Error Correction (Only relevant where TYPE = OTU#)"
::= { changePhysicalPortServiceDefEntry 16 }
changePhysicalPortServiceDefFarEndCommunication OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used for Optojack plugs; Communication to Far End Plug is observed"
::= { changePhysicalPortServiceDefEntry 17 }
changePhysicalPortServiceDefFlowControl OBJECT-TYPE
SYNTAX FspR7FlowControlMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Flow Control mechanism"
::= { changePhysicalPortServiceDefEntry 18 }
changePhysicalPortServiceDefLaneChannelSetting OBJECT-TYPE
SYNTAX FspR7ChannelIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Lane Channel Setting"
::= { changePhysicalPortServiceDefEntry 19 }
changePhysicalPortServiceDefLaserDelayTimer OBJECT-TYPE
SYNTAX FspR7LaserDelayTimer
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Relevant only when ERRFWD=LSROFF. Enables/disables the
possibility to delay turning off and on the laser.
This applies to the case when turning off the laser
is done as an error forwarding mechanism."
::= { changePhysicalPortServiceDefEntry 20 }
changePhysicalPortServiceDefLaserOffTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
UNITS "ms"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Delay before laser is swiched off"
::= { changePhysicalPortServiceDefEntry 21 }
changePhysicalPortServiceDefLaserOnTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
UNITS "ms"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Delay before laser is switched on"
::= { changePhysicalPortServiceDefEntry 22 }
changePhysicalPortServiceDefLaserOffDelayFunction OBJECT-TYPE
SYNTAX EnableState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A configuration request for the Laser Off Delay function. This function
delays turning off the laser as a consequent action to a defect."
::= { changePhysicalPortServiceDefEntry 23 }
changePhysicalPortServiceDefAutoPTassignment OBJECT-TYPE
SYNTAX FspR7ManualAuto
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Auto assignment of ODU PT"
::= { changePhysicalPortServiceDefEntry 24 }
changePhysicalPortServiceDefTributarySlotMethod OBJECT-TYPE
SYNTAX FspR7ManualAuto
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tributary Slot assignment method"
::= { changePhysicalPortServiceDefEntry 25 }
changePhysicalPortServiceDefOpticalSetPoint OBJECT-TYPE
SYNTAX Integer32 (-250..100)
UNITS "0.1 dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sets the optical power for power equalization in ROADM or for channel power control in OPCM"
::= { changePhysicalPortServiceDefEntry 26 }
changePhysicalPortServiceDefOpuPayloadType OBJECT-TYPE
SYNTAX FspR7OpuPayloadType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OPU Payload Type Indicator"
::= { changePhysicalPortServiceDefEntry 27 }
changePhysicalPortServiceDefSigDegThresSonetLine OBJECT-TYPE
SYNTAX FspR7BERThreshold
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bit-Error-Based Degradation Definition for SONET (standard integration period)"
::= { changePhysicalPortServiceDefEntry 28 }
changePhysicalPortServiceDefSigDegThresSdhMs OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Block-Error-Based Degradation Definition for SDH (standard integration period).
Defined as percentage Background Block Errors (30% default) evaluated
over a defined period (SDPER-RS)."
::= { changePhysicalPortServiceDefEntry 29 }
changePhysicalPortServiceDefSigDegThresOtu OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Background-Block-Error-Based Signal Degradation Definition for OTU"
::= { changePhysicalPortServiceDefEntry 30 }
changePhysicalPortServiceDefSigDegThresOdu OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Background-Block-Error-Based Signal Degradation Definition for ODU"
::= { changePhysicalPortServiceDefEntry 31 }
changePhysicalPortServiceDefSigDegThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Threshold for number of errors (CV or CV+DE) in one second"
::= { changePhysicalPortServiceDefEntry 32 }
changePhysicalPortServiceDefSigDegPcslThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Block-Error-Based Degradation Definition for Physical Coding Sublayer"
::= { changePhysicalPortServiceDefEntry 33 }
changePhysicalPortServiceDefSigDegThresSonetSection OBJECT-TYPE
SYNTAX FspR7BERThreshold
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bit-Error-Based Degradation Definition for SONET (standard integration period)"
::= { changePhysicalPortServiceDefEntry 34 }
changePhysicalPortServiceDefSigDegThresSdhSection OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Block-Error-Based Degradation Definition for SDH (standard integration period).
Defined as percentage Background Block Errors (30% default) evaluated
over a defined period (SDPER-RS)."
::= { changePhysicalPortServiceDefEntry 35 }
changePhysicalPortServiceDefSigDegThresOduTcmA OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Background-Block-Error-Based Signal Degradation Definition for TCM-A"
::= { changePhysicalPortServiceDefEntry 36 }
changePhysicalPortServiceDefSigDegThresOduTcmB OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Background-Block-Error-Based Signal Degradation Definition for TCM-B"
::= { changePhysicalPortServiceDefEntry 37 }
changePhysicalPortServiceDefSigDegThresOduTcmC OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Background-Block-Error-Based Signal Degradation Definition for TCM-C"
::= { changePhysicalPortServiceDefEntry 38 }
changePhysicalPortServiceDefSignalDegradePeriod OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The measurement period in seconds used together with
the deployProvIfSigDegThresSdhRegSect based on the block error counting method.
The valid range is 2..10,
The default being 7."
::= { changePhysicalPortServiceDefEntry 39 }
changePhysicalPortServiceDefSigDegPeriodOdu OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integration Period for Signal degrade"
::= { changePhysicalPortServiceDefEntry 40 }
changePhysicalPortServiceDefSigDegPeriodOtu OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integration Period for Signal degrade"
::= { changePhysicalPortServiceDefEntry 41 }
changePhysicalPortServiceDefSigDegPeriodIntegration OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integration Period for Signal degrade"
::= { changePhysicalPortServiceDefEntry 42 }
changePhysicalPortServiceDefSigDegPeriodSdhSection OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Provisionable Signal Degrade Integration Period for SDH"
::= { changePhysicalPortServiceDefEntry 43 }
changePhysicalPortServiceDefSigDegPeriodOduTcmA OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integration Period for Signal degrade"
::= { changePhysicalPortServiceDefEntry 44 }
changePhysicalPortServiceDefSigDegPeriodOduTcmB OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integration Period of TCMB Signal Segrade"
::= { changePhysicalPortServiceDefEntry 45 }
changePhysicalPortServiceDefSigDegPeriodOduTcmC OBJECT-TYPE
SYNTAX Unsigned32 (2..10)
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Integration Period of TCMC Signal Segrade"
::= { changePhysicalPortServiceDefEntry 46 }
changePhysicalPortServiceDefOtnStuffing OBJECT-TYPE
SYNTAX FspR7YesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates if bit/byte stuffing is used in the transport signal."
::= { changePhysicalPortServiceDefEntry 47 }
changePhysicalPortServiceDefTcmALevel OBJECT-TYPE
SYNTAX OtnTcmLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Activation of Tandem Connection Monitoring Instance A"
::= { changePhysicalPortServiceDefEntry 48 }
changePhysicalPortServiceDefTcmBLevel OBJECT-TYPE
SYNTAX OtnTcmLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Activation of Tandem Connection Monitoring Instance B"
::= { changePhysicalPortServiceDefEntry 49 }
changePhysicalPortServiceDefTcmCLevel OBJECT-TYPE
SYNTAX OtnTcmLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Activation of Tandem Connection Monitoring Instance C"
::= { changePhysicalPortServiceDefEntry 50 }
changePhysicalPortServiceDefTerminationLevel OBJECT-TYPE
SYNTAX OhTerminationLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Highest signal level hardware removes then generates for transmission."
::= { changePhysicalPortServiceDefEntry 51 }
changePhysicalPortServiceDefTimingSource OBJECT-TYPE
SYNTAX SonetTimingSource
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timing source for this interface.
- internal: used in stand-alone, point-to-point topologies stand-alone (dedicated fiber operation).
- loopTiming: e.g. used in point-to-point via SONET network and feeder topologies. The default is
internal(1)."
::= { changePhysicalPortServiceDefEntry 52 }
changePhysicalPortServiceDefTimModeOdu OBJECT-TYPE
SYNTAX TimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Detection of TIM-ODU Condition can be configured"
::= { changePhysicalPortServiceDefEntry 53 }
changePhysicalPortServiceDefTimModeOtu OBJECT-TYPE
SYNTAX TimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OTU Trace Identifier Mismatch (TIM) detection/action for TIM defect."
::= { changePhysicalPortServiceDefEntry 54 }
changePhysicalPortServiceDefTimModeSonetSection OBJECT-TYPE
SYNTAX TimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SONET Section Trace Identifier Mismatch (TIM) detection/action for TIM defect."
::= { changePhysicalPortServiceDefEntry 55 }
changePhysicalPortServiceDefTimModeOduTcmA OBJECT-TYPE
SYNTAX TimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCM_A Trace Identifier Mismatch (TIM) detection/action for TIM defect."
::= { changePhysicalPortServiceDefEntry 56 }
changePhysicalPortServiceDefTimModeOduTcmB OBJECT-TYPE
SYNTAX TimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCM_B Trace Identifier Mismatch (TIM) detection/action for TIM defect."
::= { changePhysicalPortServiceDefEntry 57 }
changePhysicalPortServiceDefTimModeOduTcmC OBJECT-TYPE
SYNTAX TimMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCM_C Trace Identifier Mismatch (TIM) detection/action for TIM defect."
::= { changePhysicalPortServiceDefEntry 58 }
changePhysicalPortServiceDefTraceFormSonetSection OBJECT-TYPE
SYNTAX SonetTraceForm
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Byte-Length of Trace Compared to Expected"
::= { changePhysicalPortServiceDefEntry 59 }
changePhysicalPortServiceDefTraceExpectedSonetSection OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..62))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected Sec/RS trace. NULL TRACE implies that no trace comparison is made."
::= { changePhysicalPortServiceDefEntry 60 }
changePhysicalPortServiceDefTraceTransmitSonetSection OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..62))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sec/RS Trace to be Transmitted"
::= { changePhysicalPortServiceDefEntry 61 }
changePhysicalPortServiceDefTraceExpectedOtu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected SAPI part of the OTU trace (15 character). NULL TRACE implies that no trace comparison is made."
::= { changePhysicalPortServiceDefEntry 62 }
changePhysicalPortServiceDefTraceTransmitSapiOtu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted SAPI part of the OTU trace (15 character)"
::= { changePhysicalPortServiceDefEntry 63 }
changePhysicalPortServiceDefTraceTransmitDapiOtu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted DAPI part of the OTU trace (15 character)"
::= { changePhysicalPortServiceDefEntry 64 }
changePhysicalPortServiceDefTraceTransmitOpspOtu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted Operator Specific part of the OTU trace (32 character)"
::= { changePhysicalPortServiceDefEntry 65 }
changePhysicalPortServiceDefTraceExpectedOdu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected SAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made."
::= { changePhysicalPortServiceDefEntry 66 }
changePhysicalPortServiceDefTraceTransmitSapiOdu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted SAPI part of the ODU trace (15 character)"
::= { changePhysicalPortServiceDefEntry 67 }
changePhysicalPortServiceDefTraceTransmitDapiOdu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted DAPI part of the ODU trace (15 character)"
::= { changePhysicalPortServiceDefEntry 68 }
changePhysicalPortServiceDefTraceTransmitOpspOdu OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted Operator Specific part of the ODU trace (32 character)"
::= { changePhysicalPortServiceDefEntry 69 }
changePhysicalPortServiceDefTraceExpectedOduTcmA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected SAPI part of the TCMA trace (15 character). NULL TRACE-TCM implies that no trace comparison is made."
::= { changePhysicalPortServiceDefEntry 70 }
changePhysicalPortServiceDefTraceTransmitSapiOduTcmA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted SAPI part of the TCMA trace (15 character)"
::= { changePhysicalPortServiceDefEntry 71 }
changePhysicalPortServiceDefTraceTransmitDapiOduTcmA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted DAPI part of the TCMA trace (15 character)"
::= { changePhysicalPortServiceDefEntry 72 }
changePhysicalPortServiceDefTraceTransmitOpspOduTcmA OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted Operator Specific part of the TCMA trace (32 character)"
::= { changePhysicalPortServiceDefEntry 73 }
changePhysicalPortServiceDefTraceExpectedOduTcmB OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected SAPI part of the TCMB trace (15 character). NULL TRACE-TCM implies that no trace comparison is made."
::= { changePhysicalPortServiceDefEntry 74 }
changePhysicalPortServiceDefTraceTransmitSapiOduTcmB OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted SAPI part of the TCMB trace (15 character)"
::= { changePhysicalPortServiceDefEntry 75 }
changePhysicalPortServiceDefTraceTransmitDapiOduTcmB OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted DAPI part of the TCMB trace (15 character)"
::= { changePhysicalPortServiceDefEntry 76 }
changePhysicalPortServiceDefTraceTransmitOpspOduTcmB OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted Operator Specific part of the TCMB trace (32 character)"
::= { changePhysicalPortServiceDefEntry 77 }
changePhysicalPortServiceDefTraceExpectedOduTcmC OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Expected SAPI part of the TCMC trace (15 character). NULL TRACE-TCM implies that no trace comparison is made."
::= { changePhysicalPortServiceDefEntry 78 }
changePhysicalPortServiceDefTraceTransmitSapiOduTcmC OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted SAPI part of the TCMC trace (15 character)"
::= { changePhysicalPortServiceDefEntry 79 }
changePhysicalPortServiceDefTraceTransmitDapiOduTcmC OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted DAPI part of the TCMC trace (15 character)"
::= { changePhysicalPortServiceDefEntry 80 }
changePhysicalPortServiceDefTraceTransmitOpspOduTcmC OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The transmitted Operator Specific part of the TCMC trace (32 character)"
::= { changePhysicalPortServiceDefEntry 81 }
changePhysicalPortServiceDefTxOffDelay OBJECT-TYPE
SYNTAX FspR7EnableDisable
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Enable or disable TXOFFHOLD Period for Error Forwarding and LKDO-OFF Consequent Action."
::= { changePhysicalPortServiceDefEntry 82 }
changePhysicalPortServiceDefVoaMode OBJECT-TYPE
SYNTAX FspR7VoaMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VOA operating mode"
::= { changePhysicalPortServiceDefEntry 83 }
changePhysicalPortServiceDefVoaSetpoint OBJECT-TYPE
SYNTAX Unsigned32 (0..300)
UNITS "0.1 dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sets the optical attenuation of VOA"
::= { changePhysicalPortServiceDefEntry 84 }
changePhysicalPortServiceDefMode OBJECT-TYPE
SYNTAX FspR7TransmissionMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mode of the module, determine operation or functionality"
::= { changePhysicalPortServiceDefEntry 85 }
changePhysicalPortServiceDefMonLevel OBJECT-TYPE
SYNTAX FspR7MonLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Highest signal level of intrusive or non-intrusive monitoring. Hardware may monitor the signal one layer higher than Termination Level (TERM)."
::= { changePhysicalPortServiceDefEntry 86 }
changePhysicalPortServiceDefOptimize OBJECT-TYPE
SYNTAX FspR7Optimize
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Optimizes port for either protection switch time or traffic regeneration operation"
::= { changePhysicalPortServiceDefEntry 87 }
changePhysicalPortServiceDefLinkSetup OBJECT-TYPE
SYNTAX FspR7DisableEnable
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Support RDMA over Converged Ethernet (RoCE)"
::= { changePhysicalPortServiceDefEntry 88 }
changePhysicalPortServiceDefChannelSpacing OBJECT-TYPE
SYNTAX FspR7ChannelSpacing
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ITU Grid channel spacing"
::= { changePhysicalPortServiceDefEntry 89 }
endOfChangePhysicalPortServiceDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { changeServiceDef 2 }
endOfChangeServiceDef OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { changeServiceDef 10000 }
ffpDefTable OBJECT-TYPE
SYNTAX SEQUENCE OF FfpDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "FfpDefTable"
::= { protectionDef 2 }
ffpDefEntry OBJECT-TYPE
SYNTAX FfpDefEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of FfpDefTable"
INDEX {
entityFfpShelfNo,
entityFfpSlotNo,
entityFfpPortNo,
entityFfpExtNo,
entityFfpClassName
}
::= { ffpDefTable 1 }
FfpDefEntry ::= SEQUENCE
{ ffpDefRowStatus RowStatus,
ffpDefCreationMethod FfpType,
ffpDefSDswitching EnableState,
ffpDefHoldOffTime ApsHoldoffTime,
ffpDefProtectionMech ProtectionMech,
ffpDefWorkingAid SnmpAdminString,
ffpDefProtectionAid SnmpAdminString,
ffpDefSignalDegradeSwitching EnableState,
ffpDefSignalFailureSwitching EnableState,
ffpDefFarEndIp IpAddress,
ffpDefPeerAid SnmpAdminString,
ffpDefApsType ApsType,
ffpDefRevertMode ApsRevertMode,
ffpDefWaitToRestore Unsigned32,
ffpDefDirection ApsDirection,
ffpDefProtectionType FspR7ProtectionType,
ffpDefApsFarEndModule FspR7ApsFarEndModule }
ffpDefRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RowStatus"
::= { ffpDefEntry 1 }
ffpDefCreationMethod OBJECT-TYPE
SYNTAX FfpType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of protection (normal/forced)"
::= { ffpDefEntry 2 }
ffpDefSDswitching OBJECT-TYPE
SYNTAX EnableState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This state controls whether the switch criteria for the APS group will
include the Signal Degrade alarm."
::= { ffpDefEntry 3 }
ffpDefHoldOffTime OBJECT-TYPE
SYNTAX ApsHoldoffTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This value controls the switch delay (0 to 10 seconds in
100ms steps) for the protection group. Changing the hold-off
time when the timer is active will not affect the active
timer. The change will take effect the next time the timer
is active."
::= { ffpDefEntry 4 }
ffpDefProtectionMech OBJECT-TYPE
SYNTAX ProtectionMech
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The protection type of this protection group."
::= { ffpDefEntry 5 }
ffpDefWorkingAid OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "AID of working port involved in the protection group."
::= { ffpDefEntry 6 }
ffpDefProtectionAid OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "(Protection AID) AID of protection entity involved in the protection group."
::= { ffpDefEntry 7 }
ffpDefSignalDegradeSwitching OBJECT-TYPE
SYNTAX EnableState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Switch Trigger Additionally on Signal Degrade Link Detection"
::= { ffpDefEntry 8 }
ffpDefSignalFailureSwitching OBJECT-TYPE
SYNTAX EnableState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Switch Trigger on Signal Failure Link Detection"
::= { ffpDefEntry 9 }
ffpDefFarEndIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP Address assigned to PPP Termination Point on Far-End NE. Default
is set by NE System on LINK establishment if FENDIPACPT = Y"
::= { ffpDefEntry 10 }
ffpDefPeerAid OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "AID of Protection Partner involved in the protection group."
::= { ffpDefEntry 11 }
ffpDefApsType OBJECT-TYPE
SYNTAX ApsType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of APS implemented in this protection group."
::= { ffpDefEntry 12 }
ffpDefRevertMode OBJECT-TYPE
SYNTAX ApsRevertMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Revertive Protection Switching"
::= { ffpDefEntry 13 }
ffpDefWaitToRestore OBJECT-TYPE
SYNTAX Unsigned32 (5..12)
UNITS "min"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Wait to Restore Timer value"
::= { ffpDefEntry 14 }
ffpDefDirection OBJECT-TYPE
SYNTAX ApsDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates whether the APS function is 'unidirectional' (single-ended)
or 'bidirectional' (dual-ended)."
::= { ffpDefEntry 15 }
ffpDefProtectionType OBJECT-TYPE
SYNTAX FspR7ProtectionType
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { ffpDefEntry 16 }
ffpDefApsFarEndModule OBJECT-TYPE
SYNTAX FspR7ApsFarEndModule
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This value is the far end module type(10tcc10g or other)."
::= { ffpDefEntry 17 }
endOfFfpDefTable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { protectionDef 3 }
endOfProtectionDef OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { protectionDef 10000 }
END
Reference in New Issue View Git Blame Copy Permalink