1424 lines
48 KiB
Plaintext
1424 lines
48 KiB
Plaintext
CM-SAT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
Integer32, IpAddress, Unsigned32, Counter64
|
|
FROM SNMPv2-SMI
|
|
DateAndTime, DisplayString, TruthValue, RowStatus, StorageType,
|
|
MacAddress, VariablePointer, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
fsp150cm
|
|
FROM ADVA-MIB
|
|
VlanId, VlanPriority, CmPmBinAction
|
|
FROM CM-COMMON-MIB
|
|
neIndex, shelfIndex, slotIndex, networkElementEntry
|
|
FROM CM-ENTITY-MIB
|
|
AdminState, OperationalState, SecondaryState,
|
|
MepDestinationType
|
|
FROM CM-COMMON-MIB
|
|
EsaProbePktIntervalType, EsaProbePktIntervalType
|
|
FROM CM-SA-MIB
|
|
PolicerColorMode
|
|
FROM CM-FACILITY-MIB
|
|
dot1agCfmMepEntry
|
|
FROM IEEE8021-CFM-MIB
|
|
Dot1agCfmMepIdOrZero
|
|
FROM IEEE8021-CFM-MIB;
|
|
|
|
|
|
cmServiceActivationMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201704050000Z"
|
|
ORGANIZATION "ADVA Optical Networking SE"
|
|
CONTACT-INFO
|
|
"Web URL: http://adva.com/
|
|
E-mail: support@adva.com
|
|
Postal: ADVA Optical Networking SE
|
|
Campus Martinsried
|
|
Fraunhoferstrasse 9a
|
|
82152 Martinsried/Munich
|
|
Germany
|
|
Phone: +49 089 89 06 65 0
|
|
Fax: +49 089 89 06 65 199 "
|
|
DESCRIPTION
|
|
"This module defines the Service Activation MIB definitions used by
|
|
the F3 (FSP150CM/CC) product lines.
|
|
Copyright (C) ADVA."
|
|
REVISION "201704050000Z"
|
|
DESCRIPTION
|
|
"Notes from release 201704050000Z
|
|
a) add aborted enumeration to SatStatus
|
|
Notes from release 201612020000Z
|
|
a) added satStreamDestMepEnabled to satStreamTable
|
|
|
|
Notes from release 201309120000Z
|
|
"
|
|
::= {fsp150cm 28}
|
|
|
|
--
|
|
-- OID definitions
|
|
--
|
|
cmServActivationObjects OBJECT IDENTIFIER ::= {cmServiceActivationMIB 1}
|
|
cmServActivationNotifications OBJECT IDENTIFIER ::= {cmServiceActivationMIB 2}
|
|
cmServActivationConformance OBJECT IDENTIFIER ::= {cmServiceActivationMIB 3}
|
|
|
|
ServiceActivationTestMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The test mode of Service Activation Test."
|
|
SYNTAX INTEGER {
|
|
oneWay(1),
|
|
twoWay(2)
|
|
}
|
|
|
|
SatProceduresType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"All procedures type of the Service Activation Test."
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
configTestCir(2),
|
|
configTestEir(3),
|
|
configTestCbs(4),
|
|
configTestEbs(5),
|
|
configTestPolicing(6),
|
|
performanceTest(7)
|
|
}
|
|
|
|
SatProceduresList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bit Mask that specifies all the Service Activation Test procedure."
|
|
SYNTAX BITS {
|
|
configTestCir(1),
|
|
configTestEir(2),
|
|
configTestCbs(3),
|
|
configTestEbs(4),
|
|
configTestPolicing(5),
|
|
performance(6)
|
|
}
|
|
|
|
SatStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the overall Service Activation Test."
|
|
SYNTAX INTEGER {
|
|
completed(1),
|
|
notStarted(2),
|
|
inProgress(3),
|
|
failed(4),
|
|
aborted(5)
|
|
}
|
|
|
|
SatDirection ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The direction of Service Activation Test."
|
|
SYNTAX INTEGER {
|
|
forward(1),
|
|
backward(2)
|
|
}
|
|
|
|
SatFramePayloadType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Payload type of Service Activation Test frame."
|
|
SYNTAX INTEGER {
|
|
prbs31(1),
|
|
custom(2)
|
|
}
|
|
|
|
SatTestAction ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the operation on Service Activation Test frame Payload type."
|
|
SYNTAX INTEGER {
|
|
start(1),
|
|
stop(2),
|
|
notApplicable(3)
|
|
}
|
|
|
|
SatResult ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the result of Service Activation Test."
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
pass(2),
|
|
fail(3)
|
|
}
|
|
|
|
--
|
|
-- SAT Control Table
|
|
--
|
|
satControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SatControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of entries for the control of SAT Control."
|
|
::= { cmServActivationObjects 1 }
|
|
|
|
satControlEntry OBJECT-TYPE
|
|
SYNTAX SatControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the satControlTable."
|
|
INDEX { neIndex, satControlIndex }
|
|
::= { satControlTable 1 }
|
|
|
|
SatControlEntry ::= SEQUENCE {
|
|
satControlIndex Integer32,
|
|
satControlName DisplayString,
|
|
satControlTestMode ServiceActivationTestMode,
|
|
satControlTestProcedures SatProceduresList,
|
|
satControlConfigTestDuration Integer32,
|
|
satControlConfigCIRTestStepNum Integer32,
|
|
satControlConfigCIRTestStepDuration Integer32,
|
|
satControlPerfTestDuration Integer32,
|
|
satControlStatus SatStatus,
|
|
satControlAction SatTestAction,
|
|
satControlStorageType StorageType,
|
|
satControlRowStatus RowStatus,
|
|
satControlFailCause DisplayString,
|
|
satControlTestStartTime DateAndTime,
|
|
satControlFlpduTagOverride TruthValue
|
|
}
|
|
|
|
satControlIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the Service Activation Test."
|
|
::= { satControlEntry 1 }
|
|
|
|
satControlName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The alias of the Service Activation Test."
|
|
::= { satControlEntry 2 }
|
|
|
|
satControlTestMode OBJECT-TYPE
|
|
SYNTAX ServiceActivationTestMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode of the Service Activation Test."
|
|
::= { satControlEntry 3 }
|
|
|
|
satControlTestProcedures OBJECT-TYPE
|
|
SYNTAX SatProceduresList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A List of Service Activation Test procedures."
|
|
::= { satControlEntry 4 }
|
|
|
|
satControlConfigTestDuration OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The duration of CIR step test, expressed in seconds."
|
|
::= { satControlEntry 5 }
|
|
|
|
satControlConfigCIRTestStepNum OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of steps in CIR step test."
|
|
::= { satControlEntry 6 }
|
|
|
|
satControlConfigCIRTestStepDuration OBJECT-TYPE
|
|
SYNTAX Integer32 (1..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The duration of each CIR step test."
|
|
::= { satControlEntry 7 }
|
|
|
|
satControlPerfTestDuration OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The duration of the SAT Performance Test, expressed in minutes."
|
|
::= { satControlEntry 8 }
|
|
|
|
satControlStatus OBJECT-TYPE
|
|
SYNTAX SatStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The overall SAT Control Test Status."
|
|
::= { satControlEntry 9 }
|
|
|
|
satControlAction OBJECT-TYPE
|
|
SYNTAX SatTestAction
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start/stop action of the SAT Control."
|
|
::= { satControlEntry 10 }
|
|
|
|
satControlStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of storage configured for this entry."
|
|
::= { satControlEntry 11 }
|
|
|
|
satControlRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row.
|
|
An entry MUST NOT exist in the active state unless all
|
|
objects in the entry have an appropriate value, as described
|
|
in the description clause for each writable object.
|
|
|
|
The values of satControlRowStatus supported are
|
|
createAndGo(4) and destroy(6). All mandatory attributes
|
|
must be specified in a single SNMP SET request with
|
|
satControlRowStatus value as createAndGo(4).
|
|
Upon successful row creation, this variable has a
|
|
value of active(1).
|
|
|
|
The satControlRowStatus object may be modified if
|
|
the associated instance of this object is equal to active(1)."
|
|
::= { satControlEntry 12 }
|
|
|
|
satControlFailCause OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The information about the reason of the Test failure."
|
|
::= { satControlEntry 13 }
|
|
|
|
satControlTestStartTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start time of this SAT Control."
|
|
::= { satControlEntry 14 }
|
|
|
|
satControlFlpduTagOverride OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether permit user to configure FLPDU explicitly.
|
|
Disabled: FLPDUs tag is inherited from SCM of MEP.
|
|
Enabled: User can configure FLPDUs tag explicitly, which will override the VLAN tags from MEP."
|
|
::= { satControlEntry 15 }
|
|
|
|
--
|
|
-- SAT Stream Table
|
|
--
|
|
satStreamTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SatStreamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of entries for the control of SAT Streams."
|
|
::= { cmServActivationObjects 2 }
|
|
|
|
satStreamEntry OBJECT-TYPE
|
|
SYNTAX SatStreamEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the satStreamTable."
|
|
INDEX { neIndex, satControlIndex, satStreamIndex }
|
|
::= { satStreamTable 1 }
|
|
|
|
SatStreamEntry ::= SEQUENCE {
|
|
satStreamIndex Integer32,
|
|
satStreamName DisplayString,
|
|
satStreamTestPort VariablePointer,
|
|
satStreamTestDirection SatDirection,
|
|
satStreamDestMacAddress MacAddress,
|
|
satStreamFramePayloadType SatFramePayloadType,
|
|
satStreamCustomFramePayload DisplayString,
|
|
satStreamFrameSizeList DisplayString,
|
|
satStreamSacProfileId VariablePointer,
|
|
satStreamSrcMepId VariablePointer,
|
|
satStreamDestMepType MepDestinationType,
|
|
satStreamDestMepId Integer32,
|
|
satStreamDestMepMacAddr MacAddress,
|
|
satStreamDmmPacketSize Integer32,
|
|
satStreamDmmPacketInterval EsaProbePktIntervalType,
|
|
satStreamOverallResult SatResult,
|
|
satStreamAction SatTestAction,
|
|
satStreamStatus SatStatus,
|
|
satStreamCurrentTestProcedure SatProceduresType,
|
|
satStreamCurrentConfigCirTestStep Integer32,
|
|
satStreamInner1VlanId VlanId,
|
|
satStreamInner1VlanPri VlanPriority,
|
|
satStreamInner1VlanEnabled TruthValue,
|
|
satStreamInner1ValnEtherType Integer32,
|
|
satStreamInner2VlanId VlanId,
|
|
satStreamInner2VlanPri VlanPriority,
|
|
satStreamInner2VlanEnabled TruthValue,
|
|
satStreamInner2VlanEtherType Integer32,
|
|
satStreamOuterVlanId VlanId,
|
|
satStreamOuterVlanPri VlanPriority,
|
|
satStreamOuterVlanEnabled TruthValue,
|
|
satStreamOuterVlanEtherType Integer32,
|
|
satStreamDeiEnabled TruthValue,
|
|
satStreamGreenPcp Integer32,
|
|
satStreamYellowPcp Integer32,
|
|
satStreamColorMode PolicerColorMode,
|
|
satStreamCirLo Unsigned32,
|
|
satStreamCirHi Unsigned32,
|
|
satStreamEirLo Unsigned32,
|
|
satStreamEirHi Unsigned32,
|
|
satStreamCbs Unsigned32,
|
|
satStreamEbs Unsigned32,
|
|
satStreamStorageType StorageType,
|
|
satStreamRowStatus RowStatus,
|
|
satStreamDmmPktPriority VlanPriority,
|
|
satStreamMFactor Unsigned32,
|
|
satStreamDestMepEnabled TruthValue,
|
|
satStreamLlActivateEnabled TruthValue
|
|
}
|
|
|
|
satStreamIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the Service Activation Test Stream."
|
|
::= { satStreamEntry 1 }
|
|
|
|
satStreamName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The alias of the Service Activation Test Stream."
|
|
::= { satStreamEntry 2 }
|
|
|
|
satStreamTestPort OBJECT-TYPE
|
|
SYNTAX VariablePointer
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The related port of the Service Activation Test Stream."
|
|
::= { satStreamEntry 3 }
|
|
|
|
satStreamTestDirection OBJECT-TYPE
|
|
SYNTAX SatDirection
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The direction of the Service Activation Test Stream."
|
|
::= { satStreamEntry 4 }
|
|
|
|
satStreamDestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the destination MAC address of FLPDU."
|
|
::= { satStreamEntry 5 }
|
|
|
|
satStreamFramePayloadType OBJECT-TYPE
|
|
SYNTAX SatFramePayloadType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Payload of the Frame Loss PDU."
|
|
::= { satStreamEntry 6 }
|
|
|
|
satStreamCustomFramePayload OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the customized frame payload."
|
|
::= { satStreamEntry 7 }
|
|
|
|
satStreamFrameSizeList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes a list of Frame Sizes used in FLPDU."
|
|
::= { satStreamEntry 8 }
|
|
|
|
satStreamSacProfileId OBJECT-TYPE
|
|
SYNTAX VariablePointer
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the related Service Acceptance Criteria (SAC) Profile Id."
|
|
::= { satStreamEntry 9 }
|
|
|
|
satStreamSrcMepId OBJECT-TYPE
|
|
SYNTAX VariablePointer
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Local MEP related with SAT Test Stream."
|
|
::= { satStreamEntry 10 }
|
|
|
|
satStreamDestMepType OBJECT-TYPE
|
|
SYNTAX MepDestinationType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the type of Destination MEP, which can be based on MEP id or MAC Address.
|
|
This is applicable only if satStreamDestMepEnabled is true."
|
|
|
|
::= { satStreamEntry 11 }
|
|
|
|
satStreamDestMepId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the destination MEP id.
|
|
This is applicable only if satStreamDestMepEnabled is true."
|
|
|
|
::= { satStreamEntry 12 }
|
|
|
|
satStreamDestMepMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Destination MEP's MAC Address.
|
|
This is applicable only if satStreamDestMepEnabled is true."
|
|
::= { satStreamEntry 13 }
|
|
|
|
satStreamDmmPacketSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Delay Measurement Message (DMM) frame size."
|
|
::= { satStreamEntry 14 }
|
|
|
|
satStreamDmmPacketInterval OBJECT-TYPE
|
|
SYNTAX EsaProbePktIntervalType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Delay Measurement Message (DMM) frame generation interval."
|
|
::= { satStreamEntry 15 }
|
|
|
|
satStreamOverallResult OBJECT-TYPE
|
|
SYNTAX SatResult
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the test result."
|
|
::= { satStreamEntry 16 }
|
|
|
|
satStreamAction OBJECT-TYPE
|
|
SYNTAX SatTestAction
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the operation on this test."
|
|
::= { satStreamEntry 17 }
|
|
|
|
satStreamStatus OBJECT-TYPE
|
|
SYNTAX SatStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the test status of this Test Stream."
|
|
::= { satStreamEntry 18 }
|
|
|
|
satStreamCurrentTestProcedure OBJECT-TYPE
|
|
SYNTAX SatProceduresType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the current test procedure."
|
|
::= { satStreamEntry 19 }
|
|
|
|
satStreamCurrentConfigCirTestStep OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the current step number of CIR Test."
|
|
::= { satStreamEntry 20 }
|
|
|
|
satStreamInner1VlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Inner1 VLAN Id."
|
|
::= { satStreamEntry 21 }
|
|
|
|
satStreamInner1VlanPri OBJECT-TYPE
|
|
SYNTAX VlanPriority
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Inner1 VLAN Priority."
|
|
::= { satStreamEntry 22 }
|
|
|
|
satStreamInner1VlanEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes whether the Inner1 VLAN enabled."
|
|
::= { satStreamEntry 23 }
|
|
|
|
satStreamInner1ValnEtherType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Inner2 VLAN EtherType."
|
|
::= { satStreamEntry 24 }
|
|
|
|
satStreamInner2VlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Inner2 VLAN Id."
|
|
::= { satStreamEntry 25 }
|
|
|
|
satStreamInner2VlanPri OBJECT-TYPE
|
|
SYNTAX VlanPriority
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Inner2 VLAN Priority."
|
|
::= { satStreamEntry 26 }
|
|
|
|
satStreamInner2VlanEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes whether the Inner2 VLAN enabled."
|
|
::= { satStreamEntry 27 }
|
|
|
|
satStreamInner2VlanEtherType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes whether the Inner2 VLAN ether type."
|
|
::= { satStreamEntry 28 }
|
|
|
|
satStreamOuterVlanId OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Outer VLAN Id."
|
|
::= { satStreamEntry 29 }
|
|
|
|
satStreamOuterVlanPri OBJECT-TYPE
|
|
SYNTAX VlanPriority
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Outer VLAN Priority."
|
|
::= { satStreamEntry 30 }
|
|
|
|
satStreamOuterVlanEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes whether the Outer VLAN enabled."
|
|
::= { satStreamEntry 31 }
|
|
|
|
satStreamOuterVlanEtherType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes whether the Outer VLAN Ethertype."
|
|
::= { satStreamEntry 32 }
|
|
|
|
satStreamDeiEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes whether the DEI enabled."
|
|
::= { satStreamEntry 33 }
|
|
|
|
satStreamGreenPcp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the PCP value for Green Packets."
|
|
::= { satStreamEntry 34 }
|
|
|
|
satStreamYellowPcp OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the PCP value for Yellow Packets."
|
|
::= { satStreamEntry 35 }
|
|
|
|
satStreamColorMode OBJECT-TYPE
|
|
SYNTAX PolicerColorMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the color mode for Policing test."
|
|
::= { satStreamEntry 36 }
|
|
|
|
satStreamCirLo OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes CIR low 32 bits."
|
|
::= { satStreamEntry 37 }
|
|
|
|
satStreamCirHi OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes CIR high 32 bits."
|
|
::= { satStreamEntry 38 }
|
|
|
|
satStreamEirLo OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes EIR low 32 bits."
|
|
::= { satStreamEntry 39 }
|
|
|
|
satStreamEirHi OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes EIR high 32 bits."
|
|
::= { satStreamEntry 40 }
|
|
|
|
satStreamCbs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes CBS."
|
|
::= { satStreamEntry 41 }
|
|
|
|
satStreamEbs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes CBS."
|
|
::= { satStreamEntry 42 }
|
|
|
|
satStreamStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of storage configured for this entry."
|
|
::= { satStreamEntry 43 }
|
|
|
|
satStreamRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row.
|
|
An entry MUST NOT exist in the active state unless all
|
|
objects in the entry have an appropriate value, as described
|
|
in the description clause for each writable object.
|
|
|
|
The values of satStreamRowStatus supported are
|
|
createAndGo(4) and destroy(6). All mandatory attributes
|
|
must be specified in a single SNMP SET request with
|
|
satStreamRowStatus value as createAndGo(4).
|
|
Upon successful row creation, this variable has a
|
|
value of active(1).
|
|
|
|
The satStreamRowStatus object may be modified if
|
|
the associated instance of this object is equal to active(1)."
|
|
::= { satStreamEntry 44 }
|
|
|
|
satStreamDmmPktPriority OBJECT-TYPE
|
|
SYNTAX VlanPriority
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Dmm packet priority."
|
|
::= { satStreamEntry 45 }
|
|
|
|
satStreamMFactor OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The M factor is used in test result validation.
|
|
It is added to allow for the effect of the traffic policer's CBS and EBS settings and test time.
|
|
Roughly, it equals to EBS/Test Duration, user should configure its value based on experience test."
|
|
::= { satStreamEntry 46 }
|
|
|
|
satStreamDestMepEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For a SAT two-way test, the remote end is expected to have a loopback for FLPDUs, but it may or may not have
|
|
a Responder MEP to process DMMs. This object indicates whether the remote end has a Responder MEP or not.
|
|
If the Responder MEP is present, two-way delay is computed by the Controller MEP once DMR is received,
|
|
if the Responder MEP is not present, the two-way delay is computed when the Controller MEP receives the looped back DMM."
|
|
::= { satStreamEntry 47 }
|
|
|
|
satStreamLlActivateEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute specifies whether Latching Loopback needs to be activated for the SAT stream during a SAT test.
|
|
It is only applicable for two way test."
|
|
::= { satStreamEntry 48 }
|
|
|
|
|
|
--
|
|
-- SAT Result Stats Table
|
|
--
|
|
satResultStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SatResultStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of entries for the control of SAT Result Statistics."
|
|
::= { cmServActivationObjects 3 }
|
|
|
|
satResultStatsEntry OBJECT-TYPE
|
|
SYNTAX SatResultStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the satResultStatsTable."
|
|
INDEX { neIndex, satControlIndex, satStreamIndex, satResultStatsTestType, satResultStatsStepNumber }
|
|
::= { satResultStatsTable 1 }
|
|
|
|
SatResultStatsEntry ::= SEQUENCE {
|
|
satResultStatsTestType SatProceduresType,
|
|
satResultStatsStepNumber Integer32,
|
|
satResultStatsSessionId Unsigned32,
|
|
satResultStatsStartTime DateAndTime,
|
|
satResultStatsEndTime DateAndTime,
|
|
satResultStatsStatus SatStatus,
|
|
satResultStatsResult SatResult,
|
|
satResultStatsMinIRGMeasured Counter64,
|
|
satResultStatsAvgIRGMeasured Counter64,
|
|
satResultStatsMaxIRGMeasured Counter64,
|
|
satResultStatsMinIRYMeasured Counter64,
|
|
satResultStatsAvgIRYMeasured Counter64,
|
|
satResultStatsMaxIRYMeasured Counter64,
|
|
satResultStatsFlrGMeasured Integer32,
|
|
satResultStatsFlrYMeasured Integer32,
|
|
satResultStatsFlrGCounts Counter64,
|
|
satResultStatsFlrYCounts Counter64,
|
|
satResultStatsMinFTDGMeasured Unsigned32,
|
|
satResultStatsAvgFTDGMeasured Unsigned32,
|
|
satResultStatsMaxFTDGMeasured Unsigned32,
|
|
satResultStatsIMinFDVGMeasured Unsigned32,
|
|
satResultStatsIAvgFDVGMeasured Unsigned32,
|
|
satResultStatsIMaxFDVGMeasured Unsigned32,
|
|
satResultStatsISyncErrorsNum Unsigned32,
|
|
satResultStatsIfNegFLG TruthValue,
|
|
satResultStatsIfNegFLY TruthValue,
|
|
satResultStatsAvgIRT Counter64,
|
|
satResultStatsFlrTMeasured Integer32,
|
|
satResultStatsFlTCounts Counter64,
|
|
satResultStatsIfNegFLT TruthValue
|
|
}
|
|
|
|
satResultStatsTestType OBJECT-TYPE
|
|
SYNTAX SatProceduresType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Test Type of the Service Activation Test."
|
|
::= { satResultStatsEntry 1 }
|
|
|
|
satResultStatsStepNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Test step number of the Service Activation Test."
|
|
::= { satResultStatsEntry 2 }
|
|
|
|
satResultStatsSessionId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The session id of the Service Activation Test."
|
|
::= { satResultStatsEntry 3 }
|
|
|
|
satResultStatsStartTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start time of the Service Activation Test."
|
|
::= { satResultStatsEntry 4 }
|
|
|
|
satResultStatsEndTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end time of the Service Activation Test."
|
|
::= { satResultStatsEntry 5 }
|
|
|
|
satResultStatsStatus OBJECT-TYPE
|
|
SYNTAX SatStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Status of the Service Activation Test."
|
|
::= { satResultStatsEntry 6 }
|
|
|
|
satResultStatsResult OBJECT-TYPE
|
|
SYNTAX SatResult
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes SAT whether pass."
|
|
::= { satResultStatsEntry 7 }
|
|
|
|
satResultStatsMinIRGMeasured OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the minimum Information Rate (IR) for Green Packets."
|
|
::= { satResultStatsEntry 8 }
|
|
|
|
satResultStatsAvgIRGMeasured OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the average Information Rate (IR) for Green Packets."
|
|
::= { satResultStatsEntry 9 }
|
|
|
|
satResultStatsMaxIRGMeasured OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the maximum Information Rate (IR) for Green Packets."
|
|
::= { satResultStatsEntry 10 }
|
|
|
|
satResultStatsMinIRYMeasured OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the minimum Information Rate (IR) for Yellow Packets."
|
|
::= { satResultStatsEntry 11 }
|
|
|
|
satResultStatsAvgIRYMeasured OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the average Information Rate (IR) for Yellow Packets."
|
|
::= { satResultStatsEntry 12 }
|
|
|
|
satResultStatsMaxIRYMeasured OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the maximum Information Rate (IR) for Yellow Packets."
|
|
::= { satResultStatsEntry 13 }
|
|
|
|
satResultStatsFlrGMeasured OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Frame Loss Ratio (FLR) for Green Packets.
|
|
From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost.
|
|
For the earlier release, If its value is 260001, it means 26.0001% frame lost."
|
|
::= { satResultStatsEntry 14 }
|
|
|
|
satResultStatsFlrYMeasured OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Frame Loss Ratio (FLR) for Yellow Packets.
|
|
From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost.
|
|
For the earlier release, If its value is 260001, it means 26.0001% frame lost."
|
|
::= { satResultStatsEntry 15 }
|
|
|
|
satResultStatsFlrGCounts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Frame Loss (FL) count for Green Packets."
|
|
::= { satResultStatsEntry 16 }
|
|
|
|
satResultStatsFlrYCounts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Frame Loss (FL) count for Yellow Packets."
|
|
::= { satResultStatsEntry 17 }
|
|
|
|
satResultStatsMinFTDGMeasured OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the minimum Frame Transfer Delay (FTD) for Green Packets."
|
|
::= { satResultStatsEntry 18 }
|
|
|
|
satResultStatsAvgFTDGMeasured OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the average Frame Transfer Delay (FTD) for Green Packets."
|
|
::= { satResultStatsEntry 19 }
|
|
|
|
satResultStatsMaxFTDGMeasured OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the maximum Frame Transfer Delay (FTD) for Green Packets."
|
|
::= { satResultStatsEntry 20 }
|
|
|
|
satResultStatsIMinFDVGMeasured OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the minimum Frame Delay Variation (FDV) for Green Packets."
|
|
::= { satResultStatsEntry 21 }
|
|
|
|
satResultStatsIAvgFDVGMeasured OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the average Frame Delay Variation (FDV) for Green Packets."
|
|
::= { satResultStatsEntry 22 }
|
|
|
|
satResultStatsIMaxFDVGMeasured OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the maximum Frame Delay Variation (FDV) for Green Packets."
|
|
::= { satResultStatsEntry 23 }
|
|
|
|
satResultStatsISyncErrorsNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of (time) Synchronization Errors between SAT Control and SAT Responder in the current Test."
|
|
::= { satResultStatsEntry 24 }
|
|
|
|
satResultStatsIfNegFLG OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object means whether negative green frame loss.
|
|
True: negative loss of green packets occurs, which means receiving more green packets than expected.
|
|
False: negative loss of green packets doesn't occur, which means not receiving more green packets than expected."
|
|
::= { satResultStatsEntry 25 }
|
|
|
|
satResultStatsIfNegFLY OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object means whether negative yellow frame loss.
|
|
True: negative loss of yellow packets occurs, which means receiving more yellow packets than expected.
|
|
False: negative loss of yellow packets doesn't occur, which means not receiving more yellow packets than expected."
|
|
::= { satResultStatsEntry 26 }
|
|
|
|
satResultStatsAvgIRT OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes Average IR of total packets, non distinguishing green or yellow. Only valid for color blind test."
|
|
::= { satResultStatsEntry 27 }
|
|
|
|
satResultStatsFlrTMeasured OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Frame Loss Ratio (FLR) for Total Packets.
|
|
No distinguish color, negative value means receiving much more packets than expected.
|
|
Only valid for color blind test.
|
|
If its value is 26000001, it means 26.000001% frame lost."
|
|
::= { satResultStatsEntry 28 }
|
|
|
|
satResultStatsFlTCounts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Frame Loss (FL) count for Total Packets."
|
|
::= { satResultStatsEntry 29 }
|
|
|
|
satResultStatsIfNegFLT OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object means whether negative total frame loss.
|
|
True: negative loss of green packets occurs, which means receiving more green packets than expected.
|
|
False: negative loss of green packets doesn't occur, which means not receiving more green packets than expected."
|
|
::= { satResultStatsEntry 30 }
|
|
|
|
--
|
|
-- SAT Service Acceptance Criteria Profile Table
|
|
--
|
|
satSacProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SatSacProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of entries for the control of SAT Service Acceptance Criteria (SAC) Profile."
|
|
::= { cmServActivationObjects 4 }
|
|
|
|
satSacProfileEntry OBJECT-TYPE
|
|
SYNTAX SatSacProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the satSacProfileTable."
|
|
INDEX { satSacProfileIndex }
|
|
::= { satSacProfileTable 1 }
|
|
|
|
SatSacProfileEntry ::= SEQUENCE {
|
|
satSacProfileIndex Integer32,
|
|
satSacProfileAlias DisplayString,
|
|
satSacProfileFLR Integer32,
|
|
satSacProfileFTD Unsigned32,
|
|
satSacProfileFDV Unsigned32,
|
|
satSacProfileStorageType StorageType,
|
|
satSacProfileRowStatus RowStatus
|
|
}
|
|
|
|
satSacProfileIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of SAT Service Acceptance Criteria (SAC) Profile."
|
|
::= { satSacProfileEntry 1 }
|
|
|
|
satSacProfileAlias OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The alias of SAT Service Acceptance Criteria (SAC) Profile."
|
|
::= { satSacProfileEntry 2 }
|
|
|
|
satSacProfileFLR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Frame Loss Ratio (FLR) acceptance criteria of this SAC Profile.
|
|
From the EGX8.2 and GE110 7.1, If its value is 26000001, it means 26.000001% frame lost.
|
|
For the earlier release, If its value is 260001, it means 26.0001% frame lost."
|
|
::= { satSacProfileEntry 3 }
|
|
|
|
satSacProfileFTD OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Frame Transfer Delay (FTD) acceptance criteria of this SAC Profile."
|
|
::= { satSacProfileEntry 4 }
|
|
|
|
satSacProfileFDV OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frame transfer delay variation of SAT Service Acceptance Criteria (SAC) Profile."
|
|
::= { satSacProfileEntry 5 }
|
|
|
|
satSacProfileStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of storage configured for this entry."
|
|
::= { satSacProfileEntry 6 }
|
|
|
|
satSacProfileRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row.
|
|
An entry MUST NOT exist in the active state unless all
|
|
objects in the entry have an appropriate value, as described
|
|
in the description clause for each writable object.
|
|
|
|
The values of satSacProfileRowStatus supported are
|
|
createAndGo(4) and destroy(6). All mandatory attributes
|
|
must be specified in a single SNMP SET request with
|
|
satSacProfileRowStatus value as createAndGo(4).
|
|
Upon successful row creation, this variable has a
|
|
value of active(1).
|
|
|
|
The satSacProfileRowStatus object may be modified if
|
|
the associated instance of this object is equal to active(1)."
|
|
::= { satSacProfileEntry 7 }
|
|
|
|
--
|
|
-- SAT Responder Session Table
|
|
--
|
|
satResponderSessionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SatResponderSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of entries for the control of SAT Responder Session."
|
|
::= { cmServActivationObjects 5 }
|
|
|
|
satResponderSessionEntry OBJECT-TYPE
|
|
SYNTAX SatResponderSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the satResponderSessionTable."
|
|
INDEX { neIndex, satResponderSessionIndex }
|
|
::= { satResponderSessionTable 1 }
|
|
|
|
SatResponderSessionEntry ::= SEQUENCE {
|
|
satResponderSessionIndex Unsigned32,
|
|
satResponderSessionId Unsigned32,
|
|
satResponderSessionControlMepMacAddr MacAddress,
|
|
satResponderSessionMepId VariablePointer,
|
|
satResponderSessionStorageType StorageType,
|
|
satResponderSessionRowStatus RowStatus
|
|
}
|
|
|
|
satResponderSessionIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the entry."
|
|
::= { satResponderSessionEntry 1 }
|
|
|
|
satResponderSessionId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The id of active test session negotiated between SAT Responder and SAT Control."
|
|
::= { satResponderSessionEntry 2 }
|
|
|
|
satResponderSessionControlMepMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the Control MEP's MAC Address."
|
|
::= { satResponderSessionEntry 3 }
|
|
|
|
satResponderSessionMepId OBJECT-TYPE
|
|
SYNTAX VariablePointer
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local MEP Id."
|
|
::= { satResponderSessionEntry 4 }
|
|
|
|
satResponderSessionStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of storage configured for this entry."
|
|
::= { satResponderSessionEntry 5 }
|
|
|
|
satResponderSessionRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row.
|
|
An entry MUST NOT exist in the active state unless all
|
|
objects in the entry have an appropriate value, as described
|
|
in the description clause for each writable object.
|
|
|
|
The values of satResponderSessionRowStatus supported are
|
|
createAndGo(4) and destroy(6). All mandatory attributes
|
|
must be specified in a single SNMP SET request with
|
|
satResponderSessionRowStatus value as createAndGo(4).
|
|
Upon successful row creation, this variable has a
|
|
value of active(1).
|
|
|
|
The satResponderSessionRowStatus object may be modified if
|
|
the associated instance of this object is equal to active(1)."
|
|
::= { satResponderSessionEntry 6 }
|
|
|
|
--
|
|
-- networkElementSatParamsTable
|
|
--
|
|
networkElementSatParamsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NetworkElementSatParamsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entries may be auto discovered, or can be explicitly created by
|
|
SNMP Manager. Each remotely discovered shelf is represented as
|
|
a row in this table."
|
|
::= { cmServActivationObjects 6 }
|
|
|
|
networkElementSatParamsEntry OBJECT-TYPE
|
|
SYNTAX NetworkElementSatParamsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the networkElementSatParamsTable."
|
|
AUGMENTS { networkElementEntry }
|
|
::= { networkElementSatParamsTable 1 }
|
|
|
|
|
|
NetworkElementSatParamsEntry ::= SEQUENCE {
|
|
neSatParamsEtherType Unsigned32
|
|
}
|
|
|
|
neSatParamsEtherType OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the SAT System EtherType."
|
|
::= { networkElementSatParamsEntry 1 }
|
|
|
|
--
|
|
-- satCfmMepExtTable
|
|
--
|
|
satCfmMepExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SatCfmMepExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects describe the SAT responder whether enabled on the MEP."
|
|
::= { cmServActivationObjects 7 }
|
|
|
|
satCfmMepExtEntry OBJECT-TYPE
|
|
SYNTAX SatCfmMepExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the satCfmMepExtTable."
|
|
AUGMENTS { dot1agCfmMepEntry }
|
|
::= { satCfmMepExtTable 1 }
|
|
|
|
|
|
SatCfmMepExtEntry ::= SEQUENCE {
|
|
satCfmMepSatResponderEnabled TruthValue
|
|
}
|
|
|
|
satCfmMepSatResponderEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This objects describes the SAT Responder whether enabled on the MEP."
|
|
::= { satCfmMepExtEntry 1 }
|
|
|
|
--
|
|
-- Conformance
|
|
--
|
|
cmServActivationCompliances OBJECT IDENTIFIER ::= {cmServActivationConformance 1}
|
|
cmServActivationGroups OBJECT IDENTIFIER ::= {cmServActivationConformance 2}
|
|
|
|
cmServActivationCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the requirements for conformance to the CM SAT
|
|
group."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
cmSatGroup
|
|
}
|
|
::= { cmServActivationCompliances 1 }
|
|
|
|
cmSatGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
satControlIndex, satControlName, satControlTestMode, satControlTestProcedures,
|
|
satControlConfigTestDuration, satControlConfigCIRTestStepNum, satControlConfigCIRTestStepDuration,
|
|
satControlPerfTestDuration, satControlStatus, satControlAction, satControlFailCause,satControlTestStartTime,
|
|
satControlFlpduTagOverride, satStreamIndex, satStreamName, satStreamTestPort, satStreamTestDirection,
|
|
satStreamDestMacAddress, satStreamFramePayloadType, satStreamCustomFramePayload,
|
|
satStreamFrameSizeList, satStreamSacProfileId, satStreamSrcMepId, satStreamDestMepType,
|
|
satStreamDestMepId, satStreamDestMepMacAddr, satStreamDmmPacketSize, satStreamDmmPacketInterval,
|
|
satStreamOverallResult, satStreamAction, satStreamStatus, satStreamCurrentTestProcedure,
|
|
satStreamCurrentConfigCirTestStep, satStreamInner1VlanId, satStreamInner1VlanPri, satStreamInner1VlanEnabled,
|
|
satStreamInner1ValnEtherType, satStreamInner2VlanId, satStreamInner2VlanPri, satStreamInner2VlanEnabled,
|
|
satStreamInner2VlanEtherType, satStreamOuterVlanId, satStreamOuterVlanPri, satStreamOuterVlanEnabled,
|
|
satStreamOuterVlanEtherType, satStreamDeiEnabled, satStreamGreenPcp, satStreamYellowPcp,
|
|
satStreamColorMode, satStreamCirLo, satStreamCirHi, satStreamEirLo, satStreamEirHi, satStreamCbs, satStreamEbs,
|
|
satStreamStorageType, satStreamRowStatus, satControlStorageType, satControlRowStatus, satStreamDmmPktPriority,
|
|
satStreamMFactor, satStreamDestMepEnabled, satStreamLlActivateEnabled,
|
|
satResultStatsSessionId, satResultStatsTestType, satResultStatsStepNumber, satResultStatsStartTime,
|
|
satResultStatsEndTime, satResultStatsStatus, satResultStatsResult, satResultStatsMinIRGMeasured,
|
|
satResultStatsAvgIRGMeasured, satResultStatsMaxIRGMeasured, satResultStatsMinIRYMeasured,
|
|
satResultStatsAvgIRYMeasured, satResultStatsMaxIRYMeasured, satResultStatsFlrGMeasured,
|
|
satResultStatsFlrYMeasured, satResultStatsFlrGCounts, satResultStatsFlrYCounts,
|
|
satResultStatsMinFTDGMeasured, satResultStatsAvgFTDGMeasured, satResultStatsMaxFTDGMeasured,
|
|
satResultStatsIMinFDVGMeasured, satResultStatsIAvgFDVGMeasured, satResultStatsIMaxFDVGMeasured,
|
|
satResultStatsISyncErrorsNum, satResultStatsIfNegFLG, satResultStatsIfNegFLY,
|
|
satResultStatsAvgIRT,satResultStatsFlrTMeasured,satResultStatsFlTCounts,satResultStatsIfNegFLT,
|
|
satSacProfileIndex, satSacProfileAlias, satSacProfileFLR, satSacProfileFTD, satSacProfileFDV,
|
|
satSacProfileStorageType, satSacProfileRowStatus, satResponderSessionIndex, satResponderSessionId,
|
|
satResponderSessionControlMepMacAddr, satResponderSessionMepId,
|
|
satResponderSessionStorageType, satResponderSessionRowStatus, satCfmMepSatResponderEnabled
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects used to manage the CM SAT functionality."
|
|
::= { cmServActivationGroups 1 }
|
|
|
|
END
|