504 lines
19 KiB
Plaintext
504 lines
19 KiB
Plaintext
F3-PBB-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32
|
|
FROM SNMPv2-SMI
|
|
DisplayString, TruthValue, MacAddress, VariablePointer
|
|
FROM SNMPv2-TC
|
|
cmEthernetAccPortEntry, cmEthernetNetPortEntry, cmFlowEntry,
|
|
FlowTagControl
|
|
FROM CM-FACILITY-MIB
|
|
ipManagementTunnelEntry
|
|
FROM CM-IP-MIB
|
|
PerfCounter64
|
|
FROM CM-COMMON-MIB
|
|
cmEthernetNetPortStatsEntry, cmEthernetNetPortHistoryEntry
|
|
FROM CM-PERFORMANCE-MIB
|
|
fsp150cm
|
|
FROM ADVA-MIB;
|
|
|
|
f3PBBMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201210080000Z"
|
|
ORGANIZATION "ADVA Optical Networking"
|
|
CONTACT-INFO
|
|
" Raghav Trivedi
|
|
ADVA Optical Networking, Inc.
|
|
Tel: +1 972 759-1239
|
|
E-mail: rtrivedi@advaoptical.com
|
|
Postal: 2301 N. Greenville Ave. #300
|
|
Richardson, TX USA 75082"
|
|
DESCRIPTION
|
|
"This module defines the Facility MIB definitions used by
|
|
the F3 (FSP150CM/CC) product lines.
|
|
Copyright (C) ADVA Optical Networking."
|
|
REVISION "201210080000Z"
|
|
DESCRIPTION
|
|
"Notes from release 201210080000Z. "
|
|
::= {fsp150cm 21}
|
|
--
|
|
-- OID definitions
|
|
--
|
|
f3PBBConfigObjects OBJECT IDENTIFIER ::= {f3PBBMIB 1}
|
|
f3PBBPerformanceObjects OBJECT IDENTIFIER ::= {f3PBBMIB 2}
|
|
f3PBBConformance OBJECT IDENTIFIER ::= {f3PBBMIB 3}
|
|
|
|
--
|
|
-- f3PbbEthernetAccPortTable
|
|
--
|
|
f3PbbEthernetAccPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF F3PbbEthernetAccPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of entries corresponding to PBB function on the net port"
|
|
::= { f3PBBConfigObjects 1 }
|
|
|
|
f3PbbEthernetAccPortEntry OBJECT-TYPE
|
|
SYNTAX F3PbbEthernetAccPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the f3PbbEthernetAccPortTable."
|
|
AUGMENTS { cmEthernetAccPortEntry }
|
|
::= { f3PbbEthernetAccPortTable 1 }
|
|
|
|
F3PbbEthernetAccPortEntry ::= SEQUENCE {
|
|
f3PbbEthernetAccPortITagLoopbackMask INTEGER,
|
|
f3PbbEthernetAccPortITagLoopback1 DisplayString,
|
|
f3PbbEthernetAccPortITagLoopback2 DisplayString,
|
|
f3PbbEthernetAccPortITagLoopback3 DisplayString
|
|
}
|
|
|
|
f3PbbEthernetAccPortITagLoopbackMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows to specify which itag loopback has been enabled.
|
|
1: Itag 1 loopback enabled, 2: Itag 2 loopback enabled, 4: Itag 4 loopback enabled."
|
|
::= { f3PbbEthernetAccPortEntry 1 }
|
|
|
|
f3PbbEthernetAccPortITagLoopback1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows specification of the Itag 1 to be looped back when port is in
|
|
vlan(terminal/facility) loopback configuration. This is valid only if the
|
|
corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set. The value
|
|
to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority.
|
|
If Y is specified as a *, all Priorities (0 to 7) are looped back."
|
|
::= { f3PbbEthernetAccPortEntry 2 }
|
|
|
|
f3PbbEthernetAccPortITagLoopback2 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows specification of the Itag 2 to be looped back when port is in
|
|
vlan(terminal/facility) loopback configuration. This is valid only if the
|
|
corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set. The value
|
|
to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority.
|
|
If Y is specified as a *, all Priorities (0 to 7) are looped back."
|
|
::= { f3PbbEthernetAccPortEntry 3 }
|
|
|
|
f3PbbEthernetAccPortITagLoopback3 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows specification of the Itag 3 to be looped back when port is in
|
|
vlan(terminal/facility) loopback configuration. This is valid only if the
|
|
corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set. The value
|
|
to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority.
|
|
If Y is specified as a *, all Priorities (0 to 7) are looped back."
|
|
::= { f3PbbEthernetAccPortEntry 4 }
|
|
|
|
--
|
|
-- f3PbbEthernetNetPortTable
|
|
--
|
|
f3PbbEthernetNetPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF F3PbbEthernetNetPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of entries corresponding to PBB function on the net port"
|
|
::= { f3PBBConfigObjects 2 }
|
|
|
|
f3PbbEthernetNetPortEntry OBJECT-TYPE
|
|
SYNTAX F3PbbEthernetNetPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the f3PbbEthernetNetPortTable."
|
|
AUGMENTS { cmEthernetNetPortEntry }
|
|
::= { f3PbbEthernetNetPortTable 1 }
|
|
|
|
F3PbbEthernetNetPortEntry ::= SEQUENCE {
|
|
f3PbbEthernetNetPortBackboneMacAddress MacAddress,
|
|
f3PbbEthernetNetPortITagLoopbackMask INTEGER,
|
|
f3PbbEthernetNetPortITagLoopback1 DisplayString,
|
|
f3PbbEthernetNetPortITagLoopback2 DisplayString,
|
|
f3PbbEthernetNetPortITagLoopback3 DisplayString
|
|
}
|
|
|
|
f3PbbEthernetNetPortBackboneMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is mac address of backbone network port."
|
|
::= { f3PbbEthernetNetPortEntry 1 }
|
|
|
|
f3PbbEthernetNetPortITagLoopbackMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows to specify which itag loopback has been enabled.
|
|
1: Itag 1 loopback enabled, 2: Itag 2 loopback enabled, 4: Itag 4 loopback enabled."
|
|
::= { f3PbbEthernetNetPortEntry 2 }
|
|
|
|
f3PbbEthernetNetPortITagLoopback1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows specification of the Itag 1 to be looped back when port is in
|
|
vlan(terminal/facility) loopback configuration. This is valid only if the
|
|
corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set. The value
|
|
to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority.
|
|
If Y is specified as a *, all Priorities (0 to 7) are looped back."
|
|
::= { f3PbbEthernetNetPortEntry 3 }
|
|
|
|
f3PbbEthernetNetPortITagLoopback2 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows specification of the Itag 2 to be looped back when port is in
|
|
vlan(terminal/facility) loopback configuration. This is valid only if the
|
|
corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set. The value
|
|
to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority.
|
|
If Y is specified as a *, all Priorities (0 to 7) are looped back."
|
|
::= { f3PbbEthernetNetPortEntry 4 }
|
|
|
|
f3PbbEthernetNetPortITagLoopback3 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows specification of the Itag 3 to be looped back when port is in
|
|
vlan(terminal/facility) loopback configuration. This is valid only if the
|
|
corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set. The value
|
|
to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority.
|
|
If Y is specified as a *, all Priorities (0 to 7) are looped back."
|
|
::= { f3PbbEthernetNetPortEntry 5 }
|
|
|
|
--
|
|
-- f3PbbFlowTable
|
|
--
|
|
f3PbbFlowTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF F3PbbFlowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of entries corresponding to PBB function on the flow"
|
|
::= { f3PBBConfigObjects 3 }
|
|
|
|
f3PbbFlowEntry OBJECT-TYPE
|
|
SYNTAX F3PbbFlowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the f3PbbFlowTable."
|
|
AUGMENTS { cmFlowEntry }
|
|
::= { f3PbbFlowTable 1 }
|
|
|
|
F3PbbFlowEntry ::= SEQUENCE {
|
|
f3PbbFlowITagControl FlowTagControl,
|
|
f3PbbFlowITagISID Integer32,
|
|
f3PbbFlowITagPriority Integer32,
|
|
f3PbbFlowBackboneMacDestinationEnabled TruthValue,
|
|
f3PbbFlowBackboneMacDestinationAddress MacAddress,
|
|
f3PbbFlowA2NPbbCapableFlag TruthValue
|
|
}
|
|
|
|
f3PbbFlowITagControl OBJECT-TYPE
|
|
SYNTAX FlowTagControl
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows specification of the tag management
|
|
operation on the I-TAG. Supported types are 'none', 'push', and 'pushisid'.
|
|
and it must be none while ctagcontrol or stagcontrol is not none."
|
|
::= { f3PbbFlowEntry 1 }
|
|
|
|
f3PbbFlowITagISID OBJECT-TYPE
|
|
SYNTAX Integer32 (256..16777214)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to specify the ITagISID. Its rang from 256 to 16777214."
|
|
::= { f3PbbFlowEntry 2 }
|
|
|
|
f3PbbFlowITagPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to specify the priority of ITag. Its rang from 0 to 7."
|
|
::= { f3PbbFlowEntry 3 }
|
|
|
|
f3PbbFlowBackboneMacDestinationEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether can assign BMAC value.
|
|
When enabled, user can assign a unicast BMAC as B_DA for this EVC
|
|
When disabled, 01-1E-83-<I-SID> will be used as B-DA."
|
|
::= { f3PbbFlowEntry 4 }
|
|
|
|
f3PbbFlowBackboneMacDestinationAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Customer can configure the backbone MAC destination address, the
|
|
default value is 01-1E-83-<I-SID>."
|
|
::= { f3PbbFlowEntry 5 }
|
|
|
|
f3PbbFlowA2NPbbCapableFlag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When it is false, Drop PBB frames in the A2N direction (FPGA function),
|
|
Allow to PUSH I-TAG on this flow;
|
|
When A2NPbbCapableFlag is TRUE,
|
|
Pass PBB frames in the A2N direction (FPGA function), Software allow PUSH I-TAG on this flow(normal)
|
|
will not allow to PUSH S-TAG on this flow, will not allow to PUSH C-TAG on this flow,
|
|
Software will allow to PUSH C-TAG/S-TAG on this flow."
|
|
::= { f3PbbFlowEntry 6 }
|
|
|
|
--
|
|
-- f3PbbIpManagementTunnelTable
|
|
--
|
|
f3PbbIpManagementTunnelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF F3PbbIpManagementTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of entries corresponding to PBB function on the mngt tunnel"
|
|
::= { f3PBBConfigObjects 4 }
|
|
|
|
f3PbbIpManagementTunnelEntry OBJECT-TYPE
|
|
SYNTAX F3PbbIpManagementTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the f3PbbIpManagementTunnelTable."
|
|
AUGMENTS { ipManagementTunnelEntry }
|
|
::= { f3PbbIpManagementTunnelTable 1 }
|
|
|
|
F3PbbIpManagementTunnelEntry ::= SEQUENCE {
|
|
f3PbbIpManagementTunnelItagEnabled TruthValue,
|
|
f3PbbIpManagementTunnelISID Integer32,
|
|
f3PbbIpManagementTunnelIPriority Integer32,
|
|
f3PbbIpManagementTunnelBackboneMacDestinationEnabled TruthValue,
|
|
f3PbbIpManagementTunnelBackboneMacDestinationAddress MacAddress
|
|
}
|
|
|
|
f3PbbIpManagementTunnelItagEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object ITAG whether enabled, It is Enabled only When management tunnel type is ISID based.
|
|
By default it is disabled"
|
|
::= { f3PbbIpManagementTunnelEntry 1 }
|
|
|
|
f3PbbIpManagementTunnelISID OBJECT-TYPE
|
|
SYNTAX Integer32(256..16777214)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Only applicable when iTagEnabled = enabled (ISID is shown to user, but in IFM data type here is ITAG)."
|
|
::= { f3PbbIpManagementTunnelEntry 2 }
|
|
|
|
f3PbbIpManagementTunnelIPriority OBJECT-TYPE
|
|
SYNTAX Integer32(0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Only applicable when iTagEnabled = enabled (ISID is shown to user, but in IFM data type here is ITAG, no use at present)."
|
|
::= { f3PbbIpManagementTunnelEntry 3 }
|
|
|
|
f3PbbIpManagementTunnelBackboneMacDestinationEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, we will use provisioned B-MAC for ARP and for management packets.
|
|
When disabled, we will use backbone group MAC address for ARP and get B-DA from ARP response
|
|
By default, it is disabled"
|
|
::= { f3PbbIpManagementTunnelEntry 4 }
|
|
|
|
f3PbbIpManagementTunnelBackboneMacDestinationAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User must set a valid MAC address, Only applicable when iTagEnabled = enabled
|
|
By default, it is 00:00:00:00:00:00"
|
|
::= { f3PbbIpManagementTunnelEntry 5 }
|
|
|
|
--
|
|
-- PBB Net Port Statistics Table
|
|
--
|
|
f3PbbEthernetNetPortStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF F3PbbEthernetNetPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of pbb Ethernet Network Port related statistics.
|
|
These reflect the current data."
|
|
::= { f3PBBPerformanceObjects 1 }
|
|
|
|
f3PbbEthernetNetPortStatsEntry OBJECT-TYPE
|
|
SYNTAX F3PbbEthernetNetPortStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the f3PbbEthernetNetPortStatsTable.
|
|
Entries exist in this table for each Ethernet interface/port."
|
|
AUGMENTS { cmEthernetNetPortStatsEntry }
|
|
::= { f3PbbEthernetNetPortStatsTable 1 }
|
|
|
|
F3PbbEthernetNetPortStatsEntry ::= SEQUENCE {
|
|
f3PbbEthernetNetPortStatsPbbUniBdaDiscard PerfCounter64,
|
|
f3PbbEthernetNetPortStatsPbbGroupBdaDiscard PerfCounter64
|
|
}
|
|
|
|
f3PbbEthernetNetPortStatsPbbUniBdaDiscard OBJECT-TYPE
|
|
SYNTAX PerfCounter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of PBB frames (BDA is not backbone group MAC)
|
|
discarded due to receive BDA which is not matching the
|
|
port's PBB MAC address when port is non-promiscuous mode."
|
|
::= { f3PbbEthernetNetPortStatsEntry 1 }
|
|
|
|
f3PbbEthernetNetPortStatsPbbGroupBdaDiscard OBJECT-TYPE
|
|
SYNTAX PerfCounter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of PBB frames discarded due to mismatch of I-SID in I-TAG and I-SID
|
|
in backbone group MAC in the B-DA when port is non-promiscuous mode."
|
|
::= { f3PbbEthernetNetPortStatsEntry 2 }
|
|
|
|
--
|
|
-- PBB Net Port History Statistics Table
|
|
--
|
|
f3PbbEthernetNetPortHistoryStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF F3PbbEthernetNetPortHistoryStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of pbb Ethernet Network Port related statistics.
|
|
These reflect the current data."
|
|
::= { f3PBBPerformanceObjects 2 }
|
|
|
|
f3PbbEthernetNetPortHistoryStatsEntry OBJECT-TYPE
|
|
SYNTAX F3PbbEthernetNetPortHistoryStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row in the f3PbbEthernetNetPortHistoryStatsTable.
|
|
Entries exist in this table for each Ethernet interface/port."
|
|
AUGMENTS { cmEthernetNetPortHistoryEntry }
|
|
::= { f3PbbEthernetNetPortHistoryStatsTable 1 }
|
|
|
|
F3PbbEthernetNetPortHistoryStatsEntry ::= SEQUENCE {
|
|
f3PbbEthernetNetPortHistoryStatsPbbUniBdaDiscard PerfCounter64,
|
|
f3PbbEthernetNetPortHistoryStatsPbbGroupBdaDiscard PerfCounter64
|
|
}
|
|
|
|
f3PbbEthernetNetPortHistoryStatsPbbUniBdaDiscard OBJECT-TYPE
|
|
SYNTAX PerfCounter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of PBB frames (BDA is not backbone group MAC)
|
|
discarded due to receive BDA which is not matching the
|
|
port's PBB MAC address when port is non-promiscuous mode."
|
|
::= { f3PbbEthernetNetPortHistoryStatsEntry 1 }
|
|
|
|
f3PbbEthernetNetPortHistoryStatsPbbGroupBdaDiscard OBJECT-TYPE
|
|
SYNTAX PerfCounter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of PBB frames discarded due to mismatch of I-SID in I-TAG and I-SID
|
|
in backbone group MAC in the B-DA when port is non-promiscuous mode."
|
|
::= { f3PbbEthernetNetPortHistoryStatsEntry 2 }
|
|
|
|
--
|
|
--Conformance
|
|
--
|
|
f3PBBCompliances OBJECT IDENTIFIER ::= {f3PBBConformance 1}
|
|
f3PBBGroups OBJECT IDENTIFIER ::= {f3PBBConformance 2}
|
|
|
|
f3PBBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the requirements for conformance to the PBB Object
|
|
group."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
f3PbbConfigGroup, f3PbbStatsGroup
|
|
}
|
|
::= { f3PBBCompliances 1 }
|
|
|
|
f3PbbConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
f3PbbEthernetAccPortITagLoopbackMask, f3PbbEthernetAccPortITagLoopback1,
|
|
f3PbbEthernetAccPortITagLoopback2, f3PbbEthernetAccPortITagLoopback3,
|
|
|
|
f3PbbEthernetNetPortBackboneMacAddress, f3PbbEthernetNetPortITagLoopbackMask,
|
|
f3PbbEthernetNetPortITagLoopback1, f3PbbEthernetNetPortITagLoopback2,
|
|
f3PbbEthernetNetPortITagLoopback3,
|
|
|
|
f3PbbFlowITagControl, f3PbbFlowITagISID,
|
|
f3PbbFlowITagPriority, f3PbbFlowBackboneMacDestinationEnabled,
|
|
f3PbbFlowBackboneMacDestinationAddress, f3PbbFlowA2NPbbCapableFlag,
|
|
|
|
f3PbbIpManagementTunnelItagEnabled, f3PbbIpManagementTunnelISID,
|
|
f3PbbIpManagementTunnelIPriority, f3PbbIpManagementTunnelBackboneMacDestinationEnabled,
|
|
f3PbbIpManagementTunnelBackboneMacDestinationAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects used to manage the F3 PBB Functionality
|
|
."
|
|
::= { f3PBBGroups 1 }
|
|
|
|
f3PbbStatsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
f3PbbEthernetNetPortStatsPbbUniBdaDiscard, f3PbbEthernetNetPortStatsPbbGroupBdaDiscard,
|
|
|
|
f3PbbEthernetNetPortHistoryStatsPbbUniBdaDiscard, f3PbbEthernetNetPortHistoryStatsPbbGroupBdaDiscard
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects used to manage the F3 PBB Functionality
|
|
."
|
|
::= { f3PBBGroups 2 }
|
|
|
|
END
|