mibs/MIBS/advantech/ADVANTECH-EKI-PRONEER-MIB
2023-12-05 12:25:34 +01:00

10580 lines
329 KiB
Plaintext

-- ************************************************************************
-- ADVANTECH-EKI-PRONEER-MIB: Advantech Industrial Management Switch MIB
--
-- Dec. 2014, Industrial Communication
--
-- Copyright (c) 2014 by Advantech iConnectivity Group, Inc.
-- All rights reserved.
-- ************************************************************************
ADVANTECH-EKI-PRONEER-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
enterprises,
OBJECT-TYPE,
Integer32,
IpAddress,
NOTIFICATION-TYPE,
TimeTicks FROM SNMPv2-SMI
OBJECT-GROUP FROM SNMPv2-CONF
DisplayString, DateAndTime FROM SNMPv2-TC;
advantech MODULE-IDENTITY
LAST-UPDATED "201412020000Z"
ORGANIZATION "Advantech iConnectivity Group"
CONTACT-INFO
" Advantech iConnectivity ICOM
E-mail: ICG.Support@advantech.com.tw
Guider.Lee@advantech.com.tw"
DESCRIPTION
"The MIB module is for Advantech switch,
e.g. EKI-XXXX, etc.
Copyright (C) Advantech iConnectivity Group(2014).
"
-- * Revision history
REVISION "201412020000Z"
DESCRIPTION
"Initial version of the Advantech Switch MIB. "
::= { enterprises 10297 }
aSwitchMIB OBJECT IDENTIFIER ::= { advantech 202 }
proneer OBJECT IDENTIFIER ::= { aSwitchMIB 7000 }
monitoring OBJECT IDENTIFIER ::= { proneer 1 }
system OBJECT IDENTIFIER ::= { proneer 2 }
l2switching OBJECT IDENTIFIER ::= { proneer 3 }
macAddressTable OBJECT IDENTIFIER ::= { proneer 4 }
security OBJECT IDENTIFIER ::= { proneer 5 }
qos OBJECT IDENTIFIER ::= { proneer 6 }
management OBJECT IDENTIFIER ::= { proneer 7 }
diagnostics OBJECT IDENTIFIER ::= { proneer 8 }
maintenance OBJECT IDENTIFIER ::= { proneer 9 }
traps OBJECT IDENTIFIER ::= { proneer 99 }
-- status
deviceInfo OBJECT IDENTIFIER ::= { monitoring 1 }
loggingMessage OBJECT IDENTIFIER ::= { monitoring 2 }
portMonitoring OBJECT IDENTIFIER ::= { monitoring 3 }
linkAggregation OBJECT IDENTIFIER ::= { monitoring 4 }
lldpStatistics OBJECT IDENTIFIER ::= { monitoring 5 }
igmpStatistics OBJECT IDENTIFIER ::= { monitoring 6 }
mldStatistics OBJECT IDENTIFIER ::= { monitoring 7 }
-- status.deviceInfo
systemName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "System name of the switch"
::= { deviceInfo 1 }
systemLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "System location of the switch."
::= { deviceInfo 2 }
systemContact OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "System contact of the switch"
::= { deviceInfo 3 }
macAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MAC address of the switch."
::= { deviceInfo 4 }
ipAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP address of the switch."
::= { deviceInfo 5 }
subnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Subnet mask of the switch."
::= { deviceInfo 6 }
gateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Default gateway of the switch."
::= { deviceInfo 7 }
loaderVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Boot loader version of the switch."
::= { deviceInfo 8 }
loaderDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Boot loader date of the switch."
::= { deviceInfo 9 }
firmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Firmware version of the switch."
::= { deviceInfo 10 }
firmwareDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Firmware release date of the switch."
::= { deviceInfo 11 }
systemObjectID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SNMP system object ID of the switch."
::= { deviceInfo 12 }
systemUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time since the switch was last re-initialized."
::= { deviceInfo 13 }
ledStatus OBJECT IDENTIFIER ::= { deviceInfo 14 }
ledSYSStatus OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The LED status of system operating."
::= { ledStatus 1 }
ledRMStatus OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The LED status of ring master."
::= { ledStatus 2 }
ledPWR1Status OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The LED status of power input 1."
::= { ledStatus 3 }
ledPWR2Status OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The LED status of power input 2."
::= { ledStatus 4 }
ledAlarmStatus OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The LED status of alarm."
::= { ledStatus 5 }
ledPFAILStatus OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The LED status of P-Fail."
::= { ledStatus 6 }
ledRFAILStatus OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The LED status of R-Fail."
::= { ledStatus 7 }
ledLOOPStatus OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The LED status of loop detection."
::= { ledStatus 8 }
ledTempStatus OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The LED status of system temperature."
::= { ledStatus 9 }
buildVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Build version of the switch."
::= { deviceInfo 15 }
-- status.loggingMessage
loggingBufferTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoggingBufferedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of the logging buffer"
::= { loggingMessage 1 }
loggingBufferEntry OBJECT-TYPE
SYNTAX LoggingBufferedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of the logging buffer"
INDEX { loggingBufferIndex }
::= { loggingBufferTable 1 }
LoggingBufferedEntry ::= SEQUENCE {
loggingBufferIndex Integer32,
loggingBufferSeverity INTEGER,
loggingBufferCategory DisplayString,
loggingBufferTimeStamp DisplayString,
loggingBufferMessage DisplayString
}
loggingBufferIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the logging buffer"
::= { loggingBufferEntry 1 }
loggingBufferSeverity OBJECT-TYPE
SYNTAX INTEGER {
emerg(0),
alert(1),
crit(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The severity of the logging buffer."
::= { loggingBufferEntry 2 }
loggingBufferCategory OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The category of the logging buffer."
::= { loggingBufferEntry 3 }
loggingBufferTimeStamp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time stamp of the logging buffer."
::= { loggingBufferEntry 4 }
loggingBufferMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The messge of the logging buffer."
::= { loggingBufferEntry 5 }
clearBufferedMsg OBJECT-TYPE
SYNTAX INTEGER {
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete the logging message in buffer."
::= { loggingMessage 2 }
loggingFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoggingFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of the logging file"
::= { loggingMessage 3 }
loggingFileEntry OBJECT-TYPE
SYNTAX LoggingFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of the logging file"
INDEX { loggingFileIndex }
::= { loggingFileTable 1 }
LoggingFileEntry ::= SEQUENCE {
loggingFileIndex Integer32,
loggingFileSeverity INTEGER,
loggingFileCategory DisplayString,
loggingFileTimeStamp DisplayString,
loggingFileMessage DisplayString
}
loggingFileIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the logging file"
::= { loggingFileEntry 1 }
loggingFileSeverity OBJECT-TYPE
SYNTAX INTEGER {
emerg(0),
alert(1),
crit(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The severity of the logging file"
::= { loggingFileEntry 2 }
loggingFileCategory OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The category of the logging file"
::= { loggingFileEntry 3 }
loggingFileTimeStamp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time stamp of the logging file"
::= { loggingFileEntry 4 }
loggingFileMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The message of the logging file"
::= { loggingFileEntry 5 }
clearFileMsg OBJECT-TYPE
SYNTAX INTEGER {
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delete the logging message in file."
::= { loggingMessage 4 }
-- status.port
portStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of the RMON counters."
::= { portMonitoring 1 }
portStatisticEntry OBJECT-TYPE
SYNTAX PortStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of the RMON counters."
INDEX { portStatisticIndex }
::= { portStatisticTable 1 }
PortStatisticEntry ::= SEQUENCE {
portStatisticIndex Integer32,
portCounterClear INTEGER,
ifInOctets Integer32,
ifInUcastPkts Integer32,
ifInNUcastPkts Integer32,
ifInDiscards Integer32,
ifOutOctets Integer32,
ifOutUcastPkts Integer32,
ifOutNUcastPkts Integer32,
ifOutDiscards Integer32,
ifInMulticastPkts Integer32,
ifInBroadcastPkts Integer32,
ifOutMulticastPkts Integer32,
ifOutBroadcastPkts Integer32,
dot3StatsAlignmentErrors Integer32,
dot3StatsFCSErrors Integer32,
dot3StatsSingleCollisionFrames Integer32,
dot3StatsMultipleCollisionFrames Integer32,
dot3StatsDeferredTransmissions Integer32,
dot3StatsLateCollisions Integer32,
dot3StatsExcessiveCollisions Integer32,
dot3StatsFrameTooLongs Integer32,
dot3StatsSymbolErrors Integer32,
dot3ControlInUnknownOpcodes Integer32,
dot3InPauseFrames Integer32,
dot3OutPauseFrames Integer32
}
portStatisticIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of the port counters."
::= { portStatisticEntry 1 }
portCounterClear OBJECT-TYPE
SYNTAX INTEGER {
nothing(0),
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear the port counter."
::= { portStatisticEntry 2 }
ifInOctets OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of octets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { portStatisticEntry 3 }
ifInUcastPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { portStatisticEntry 4 }
ifInNUcastPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast or
broadcast address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.
This object is deprecated in favour of ifInMulticastPkts and
ifInBroadcastPkts."
::= { portStatisticEntry 5 }
ifInDiscards OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet could be to
free up buffer space.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime"
::= { portStatisticEntry 6 }
ifOutOctets OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of octets transmitted out of the
interface, including framing characters.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { portStatisticEntry 7 }
ifOutUcastPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { portStatisticEntry 8 }
ifOutNUcastPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime.
This object is deprecated in favour of ifOutMulticastPkts
and ifOutBroadcastPkts."
::= { portStatisticEntry 9 }
ifOutDiscards OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer space.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { portStatisticEntry 10 }
ifInMulticastPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast
address at this sub-layer. For a MAC layer protocol, this
includes both Group and Functional addresses.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { portStatisticEntry 11 }
ifInBroadcastPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a broadcast
address at this sub-layer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { portStatisticEntry 12 }
ifOutMulticastPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
multicast address at this sub-layer, including those that
were discarded or not sent. For a MAC layer protocol, this
includes both Group and Functional addresses.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { portStatisticEntry 13 }
ifOutBroadcastPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
broadcast address at this sub-layer, including those that
were discarded or not sent.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
ifCounterDiscontinuityTime."
::= { portStatisticEntry 14 }
dot3StatsAlignmentErrors OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of frames received on a particular
interface that are not an integral number of
octets in length and do not pass the FCS check.
The count represented by an instance of this
object is incremented when the alignmentError
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions pertain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC.
This counter does not increment for group
encoding schemes greater than 4 bits per group.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCStatsAlignmentErrors object for 10 Gb/s
or faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
::= { portStatisticEntry 15 }
dot3StatsFCSErrors OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of frames received on a particular
interface that are an integral number of octets
in length but do not pass the FCS check. This
count does not include frames received with
frame-too-long or frame-too-short error.
The count represented by an instance of this
object is incremented when the frameCheckError
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions pertain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC.
Note: Coding errors detected by the physical
layer for speeds above 10 Mb/s will cause the
frame to fail the FCS check.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCStatsFCSErrors object for 10 Gb/s or
faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
::= { portStatisticEntry 16 }
dot3StatsSingleCollisionFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of frames that are involved in a single
collision, and are subsequently transmitted
successfully.
A frame that is counted by an instance of this
object is also counted by the corresponding
instance of either the ifOutUcastPkts,
ifOutMulticastPkts, or ifOutBroadcastPkts,
and is not counted by the corresponding
instance of the dot3StatsMultipleCollisionFrames
object.
This counter does not increment when the
interface is operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
::= { portStatisticEntry 17 }
dot3StatsMultipleCollisionFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of frames that are involved in more
than one collision and are subsequently
transmitted successfully.
A frame that is counted by an instance of this
object is also counted by the corresponding
instance of either the ifOutUcastPkts,
ifOutMulticastPkts, or ifOutBroadcastPkts,
and is not counted by the corresponding
instance of the dot3StatsSingleCollisionFrames
object.
This counter does not increment when the
interface is operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
::= { portStatisticEntry 18 }
dot3StatsDeferredTransmissions OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of frames for which the first
transmission attempt on a particular interface
is delayed because the medium is busy.
The count represented by an instance of this
object does not include frames involved in
collisions.
This counter does not increment when the
interface is operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
::= { portStatisticEntry 19 }
dot3StatsLateCollisions OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times that a collision is
detected on a particular interface later than
one slotTime into the transmission of a packet.
A (late) collision included in a count
represented by an instance of this object is
also considered as a (generic) collision for
purposes of other collision-related
statistics."
::= { portStatisticEntry 20 }
dot3StatsExcessiveCollisions OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of frames for which transmission on a
particular interface fails due to excessive
collisions.
This counter does not increment when the
interface is operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
::= { portStatisticEntry 21 }
dot3StatsFrameTooLongs OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of frames received on a particular
interface that exceed the maximum permitted
frame size.
The count represented by an instance of this
object is incremented when the frameTooLong
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions pertain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 80 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCStatsFrameTooLongs object for 10 Gb/s
or faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
::= { portStatisticEntry 22 }
dot3StatsSymbolErrors OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For an interface operating at 100 Mb/s, the
number of times there was an invalid data symbol
when a valid carrier was present.
For an interface operating in half-duplex mode
at 1000 Mb/s, the number of times the receiving
media is non-idle (a carrier event) for a period
of time equal to or greater than slotTime, and
during which there was at least one occurrence
of an event that causes the PHY to indicate
'Data reception error' or 'carrier extend error'
on the GMII.
For an interface operating in full-duplex mode
at 1000 Mb/s, the number of times the receiving
media is non-idle (a carrier event) for a period
of time equal to or greater than minFrameSize,
and during which there was at least one
occurrence of an event that causes the PHY to
indicate 'Data reception error' on the GMII.
For an interface operating at 10 Gb/s, the
number of times the receiving media is non-idle
(a carrier event) for a period of time equal to
or greater than minFrameSize, and during which
there was at least one occurrence of an event
that causes the PHY to indicate 'Receive Error'
on the XGMII.
The count represented by an instance of this
object is incremented at most once per carrier
event, even if multiple symbol errors occur
during the carrier event. This count does
not increment if a collision is present.
This counter does not increment when the
interface is operating at 10 Mb/s.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCStatsSymbolErrors object for 10 Gb/s
or faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
::= { portStatisticEntry 23 }
dot3ControlInUnknownOpcodes OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of MAC Control frames received on this
interface that contain an opcode that is not
supported by this device.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCControlInUnknownOpcodes object for 10 Gb/s
or faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
::= { portStatisticEntry 24 }
dot3InPauseFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of MAC Control frames received on this
interface with an opcode indicating the PAUSE
operation.
This counter does not increment when the
interface is operating in half-duplex mode.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCInPauseFrames object for 10 Gb/s or
faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
::= { portStatisticEntry 25 }
dot3OutPauseFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of MAC Control frames transmitted on
this interface with an opcode indicating the
PAUSE operation.
This counter does not increment when the
interface is operating in half-duplex mode.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCOutPauseFrames object for 10 Gb/s or
faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
::= { portStatisticEntry 26 }
-- status.linkAggregation
lagStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF LagStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of the link aggregation group"
::= { linkAggregation 1 }
lagStatusEntry OBJECT-TYPE
SYNTAX LagStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of the link aggregation group"
INDEX { lagStatusIndex }
::= { lagStatusTable 1 }
LagStatusEntry ::= SEQUENCE {
lagStatusIndex Integer32,
lagStatusName DisplayString,
lagStatusType INTEGER,
lagStatusLinkState INTEGER,
lagStatusActiveMember DisplayString,
lagStatusStandbyMember DisplayString
}
lagStatusIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of the link aggregation group"
::= { lagStatusEntry 1 }
lagStatusName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The LAG port description"
::= { lagStatusEntry 2 }
lagStatusType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
lacp(2),
none(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of the LAG.
Static: The group of ports assigned to a static LAG
are always active members.
LACP: The group of ports assigned to dynamic LAG
are candidate ports. LACP determines which candidate
ports are active member ports."
::= { lagStatusEntry 3 }
lagStatusLinkState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
notPresent(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LAG port link status"
::= { lagStatusEntry 4 }
lagStatusActiveMember OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Active member ports of the LAG"
::= { lagStatusEntry 5 }
lagStatusStandbyMember OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Inactive or candudate member ports of the LAG"
::= { lagStatusEntry 6 }
lacpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of LACP"
::= { linkAggregation 2 }
lacpInfoEntry OBJECT-TYPE
SYNTAX LacpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of LACP"
INDEX { lacpInfoLagIndex, lacpInfoPortIndex }
::= { lacpInfoTable 1 }
LacpInfoEntry ::= SEQUENCE {
lacpInfoLagIndex DisplayString,
lacpInfoPortIndex DisplayString,
lacpInfoPartnerSysId DisplayString,
lacpInfoPnkey DisplayString,
lacpInfoAtkey DisplayString,
lacpInfoSel DisplayString,
lacpInfoMux DisplayString,
lacpInfoReceiv DisplayString,
lacpInfoPrdtx DisplayString,
lacpInfoAtstat DisplayString,
lacpInfoPnstat DisplayString
}
lacpInfoLagIndex OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The LACP name"
::= { lacpInfoEntry 1 }
lacpInfoPortIndex OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Member port name"
::= { lacpInfoEntry 2 }
lacpInfoPartnerSysId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The system ID of link partner."
::= { lacpInfoEntry 3 }
lacpInfoPnkey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port key of partner"
::= { lacpInfoEntry 4 }
lacpInfoAtkey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port key of actor"
::= { lacpInfoEntry 5 }
lacpInfoSel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LACP selection logic status of the port"
::= { lacpInfoEntry 6 }
lacpInfoMux OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LACP mux state machine status of the port"
::= { lacpInfoEntry 7 }
lacpInfoReceiv OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LACP receive state machine status of the port"
::= { lacpInfoEntry 8 }
lacpInfoPrdtx OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LACP periodic transmission state machine status of the port."
::= { lacpInfoEntry 9 }
lacpInfoAtstat OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The actor state field of LACP PDU description."
::= { lacpInfoEntry 10 }
lacpInfoPnstat OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The partner state field of LACP PDU description."
::= { lacpInfoEntry 11 }
-- status.lldpStatistucs
lldpClearStatistics OBJECT-TYPE
SYNTAX INTEGER {
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear the LLDP statistics"
::= { lldpStatistics 1 }
inertions OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times the complete set of infomation
advertised by a partcular MAC Service Access Point(MSAP)
has been inserted into tables associated with the remote
systems"
::= { lldpStatistics 2 }
deletions OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times the complete set of infomation
advertised by MSAP has been deleted from tables associated
with the remote systems"
::= { lldpStatistics 3 }
drops OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times the complete set of information
advertised by MSAP could not be entered into tables
associated with the remote systems because of insufficient
resources."
::= { lldpStatistics 4 }
ageouts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of times the complete set of information
advertised by MSAP has been deleted from tables associated
with the remote systems because the information timeliness
interval has expired."
::= { lldpStatistics 5 }
lldpPortStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LLDPPortStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of LLDP port statistics"
::= { lldpStatistics 6 }
lldpPortStatisticsEntry OBJECT-TYPE
SYNTAX LLDPPortStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of LLDP port statistics"
INDEX { lldpPortStatIndex }
::= { lldpPortStatisticsTable 1 }
LLDPPortStatisticsEntry ::= SEQUENCE {
lldpPortStatIndex Integer32,
lldpPortStatTotalTxFrame Integer32,
lldpPortStatTotalRxFrame Integer32,
lldpPortStatDiscardRxFrame Integer32,
lldpPortStatErrorRxFrame Integer32,
lldpPortStatDiscardRxTlv Integer32,
lldpPortStatUnrecognizedRxTlv Integer32,
lldpPortStatTotalRxAgeouts Integer32
}
lldpPortStatIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Interface or port number."
::= { lldpPortStatisticsEntry 1 }
lldpPortStatTotalTxFrame OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of LLDP frames transmitted on the corresponding
port."
::= { lldpPortStatisticsEntry 2 }
lldpPortStatTotalRxFrame OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of LLDP frames received by this LLDP agent on the
corresponding port, while the LLDP agent is enabled"
::= { lldpPortStatisticsEntry 3 }
lldpPortStatDiscardRxFrame OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of LLDP frames discard for any reason by this LLDP
agent on the corresponding port"
::= { lldpPortStatisticsEntry 4 }
lldpPortStatErrorRxFrame OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of invalid LLDP frames received by the LLDP agent
on the corresponding port, while the LLDP agent is enabled"
::= { lldpPortStatisticsEntry 5 }
lldpPortStatDiscardRxTlv OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of TLVs LLDP frames discard for any reason by
this LLDP agent on the corresponding port"
::= { lldpPortStatisticsEntry 6 }
lldpPortStatUnrecognizedRxTlv OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of TLVs LLDP frames that are unrecognized while
this LLDP agent is enabled"
::= { lldpPortStatisticsEntry 7 }
lldpPortStatTotalRxAgeouts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of age out LLDP frames"
::= { lldpPortStatisticsEntry 8 }
-- status.igmpStatistics
totalRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IGMP snooping total Rx counter"
::= { igmpStatistics 1 }
validRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IGMP snooping valid Rx counter"
::= { igmpStatistics 2 }
invalidRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IGMP snooping invalid Rx counter"
::= { igmpStatistics 3 }
otherRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IGMP snooping other Rx counter"
::= { igmpStatistics 4 }
leaveRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IGMP snooping leave Rx counter"
::= { igmpStatistics 5 }
reportRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IGMP snooping report Rx counter"
::= { igmpStatistics 6 }
generalQueryRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IGMP snooping general query Rx counter"
::= { igmpStatistics 7 }
specialGroupQueryRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IGMP snooping special group query Rx counter"
::= { igmpStatistics 8 }
specialGroupSourceQueryRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IGMP snooping special group source query Rx counter"
::= { igmpStatistics 9 }
leaveTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IGMP snooping leave Tx counter"
::= { igmpStatistics 10 }
reportTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IGMP snooping report Tx counter"
::= { igmpStatistics 11 }
generalQueryTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IGMP snooping general query Tx counter"
::= { igmpStatistics 12 }
specialGroupQueryTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IGMP snooping special group query Tx counter"
::= { igmpStatistics 13 }
specialGroupSourceQueryTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IGMP snooping special group source query Tx counter"
::= { igmpStatistics 14 }
clearigmpStatistics OBJECT-TYPE
SYNTAX INTEGER {
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear IGMP snooping statistics counter"
::= { igmpStatistics 15 }
-- status.mldStatistics
mldtotalRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MLD total Rx counter"
::= { mldStatistics 1 }
mldvalidRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MLD valid Rx counter"
::= { mldStatistics 2 }
mldinvalidRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MLD invalid Rx counter"
::= { mldStatistics 3 }
mldotherRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MLD other Rx counter"
::= { mldStatistics 4 }
mldleaveRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MLD leave Rx counter"
::= { mldStatistics 5 }
mldreportRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MLD report Rx counter"
::= { mldStatistics 6 }
mldgeneralQueryRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MLD general query Rx counter"
::= { mldStatistics 7 }
mldspecialGroupQueryRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MLD special group query Rx counter"
::= { mldStatistics 8 }
mldspecialGroupSourceQueryRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MLD special group source query Rx counter"
::= { mldStatistics 9 }
mldleaveTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MLD leave Tx counter"
::= { mldStatistics 10 }
mldreportTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MLD report Tx counter"
::= { mldStatistics 11 }
mldgeneralQueryTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MLD general query Tx counter"
::= { mldStatistics 12 }
mldspecialGroupQueryTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MLD special group query Tx counter"
::= { mldStatistics 13 }
mldspecialGroupSourceQueryTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MLD special group source query Tx counter"
::= { mldStatistics 14 }
clearmldStatistics OBJECT-TYPE
SYNTAX INTEGER {
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear MLD statistics counter"
::= { mldStatistics 15 }
-- system
ipSettings OBJECT IDENTIFIER ::= { system 1 }
ipv6Settings OBJECT IDENTIFIER ::= { system 2 }
managementVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This allows the entry of a VLAN from which a management station
will be allowed to manage the device using TCP/IP (in-band via
web manager or Telnet). Management stations that are on VLANs
other than the one seleted here will not be able to manage the
Switch. The default management VLAN is VLAN 1."
::= { system 3 }
systemTime OBJECT IDENTIFIER ::= { system 4 }
sfp OBJECT IDENTIFIER ::= { system 5 }
dhcpClientOpt82 OBJECT IDENTIFIER ::= { system 6 }
networkPort OBJECT IDENTIFIER ::= { system 7 }
-- system.ipSettings
ipv4Mode OBJECT-TYPE
SYNTAX INTEGER {
static(1),
dhcp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the mode of network connection
Static: Enable static IP address.
DHCP: Enable DHCP to obtain IP information from a
DHCP server on the network."
::= { ipSettings 1 }
ipv4Address OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If static mode is enabled, enter IP address in this field."
::= { ipSettings 2 }
ipv4SubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If static mode is enabled, enter subnet mask in this field."
::= { ipSettings 3 }
ipv4Gateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If static mode is enabled, enter gateway address in this field."
::= { ipSettings 4 }
ipv4DnsServer1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If static mode is enabled, enter primary DNS server address
in this field"
::= { ipSettings 5 }
ipv4DnsServer2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If static mode is enabled, enter secondary DNS server address
in this field"
::= { ipSettings 6 }
interfaceIpv4Table OBJECT-TYPE
SYNTAX SEQUENCE OF InterfaceIpv4Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of interface IP address"
::= { ipSettings 7 }
interfaceIpv4Entry OBJECT-TYPE
SYNTAX InterfaceIpv4Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of interface IP address"
INDEX { interfaceIpv4Index }
::= { interfaceIpv4Table 1 }
InterfaceIpv4Entry ::= SEQUENCE {
interfaceIpv4Index Integer32,
interfaceIpv4Vlan Integer32,
interfaceIpv4Mode INTEGER,
interfaceIpv4Address IpAddress,
interfaceIpv4SubnetMask IpAddress,
interfaceIpv4Gateway IpAddress,
interCurrIpv4DhcpState INTEGER,
interCurrIpv4Address IpAddress,
interCurrIpv4SubnetMask IpAddress,
interCurrIpv4Gateway IpAddress
}
interfaceIpv4Index OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of interface IPv4 table"
::= { interfaceIpv4Entry 1 }
interfaceIpv4Vlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The VLAN ID of interface IPv4 table"
::= { interfaceIpv4Entry 2 }
interfaceIpv4Mode OBJECT-TYPE
SYNTAX INTEGER {
static(1),
dhcp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the mode of network connection
Static: Enable static IP address.
DHCP: Enable DHCP to obtain IP information from a
DHCP server on the network."
::= { interfaceIpv4Entry 3 }
interfaceIpv4Address OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If static mode is enabled, enter IP address in this field."
::= { interfaceIpv4Entry 4 }
interfaceIpv4SubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If static mode is enabled, enter subnet mask in this field."
::= { interfaceIpv4Entry 5 }
interfaceIpv4Gateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If static mode is enabled, enter gateway address in this field."
::= { interfaceIpv4Entry 6 }
interCurrIpv4DhcpState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current status of IPv4 DHCP."
::= { interfaceIpv4Entry 7 }
interCurrIpv4Address OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current IPv4 address"
::= { interfaceIpv4Entry 8 }
interCurrIpv4SubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current IPv4 subnet mask"
::= { interfaceIpv4Entry 9 }
interCurrIpv4Gateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current IPv4 gateway."
::= { interfaceIpv4Entry 10 }
-- system.ipv6Settings
autoConfiguration OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IPv6 Auto Configuration state."
::= { ipv6Settings 1 }
ipv6Address OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If auto configuration mode is disabled, enter IPv6 address in
this field."
::= { ipv6Settings 2 }
ipv6SubnetMask OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If auto configuration mode is disabled, enter IPv6 submask in
this field."
::= { ipv6Settings 3 }
ipv6Gateway OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If auto configuration mode is disabled, enter IPv6 gateway
address in this field."
::= { ipv6Settings 4 }
dhcpv6Client OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "DHCPv6 client state"
::= { ipv6Settings 5 }
ipv6InUseTable OBJECT-TYPE
SYNTAX SEQUENCE OF IPv6InUseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of in-use IPv6 address"
::= { ipv6Settings 6 }
ipv6InUseEntry OBJECT-TYPE
SYNTAX IPv6InUseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of in-use IPv6 address"
INDEX { ipv6InUseIndex }
::= { ipv6InUseTable 1 }
IPv6InUseEntry ::= SEQUENCE {
ipv6InUseIndex Integer32,
ipv6InUseAddress DisplayString,
ipv6InUseSubnetMask Integer32
}
ipv6InUseIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current use IPv6 submask"
::= { ipv6InUseEntry 1 }
ipv6InUseAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current use IPv6 address"
::= { ipv6InUseEntry 2 }
ipv6InUseSubnetMask OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current use IPv6 submask"
::= { ipv6InUseEntry 3 }
ipv6InUseRouter OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current use IPv6 router address"
::= { ipv6Settings 7 }
dhcpv6DUID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DHCPv6 DUID"
::= { ipv6Settings 8 }
dhcpv6IPAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DHCPv6 IP address"
::= { ipv6Settings 9 }
-- system.systemTime
systemTimeSetting OBJECT IDENTIFIER ::= { systemTime 1 }
enableSNTP OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable or disable using SNTP server."
::= { systemTimeSetting 1 }
manualTime OBJECT IDENTIFIER ::= { systemTimeSetting 2 }
year OBJECT-TYPE
SYNTAX Integer32 (2000..2035)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The year of the switch"
::= { manualTime 1 }
month OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The month of the switch"
::= { manualTime 2 }
day OBJECT-TYPE
SYNTAX Integer32 (1..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The day of the switch"
::= { manualTime 3 }
hours OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The hour of the switch"
::= { manualTime 4 }
minutes OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The minutes of the switch"
::= { manualTime 5 }
seconds OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The second of the switch"
::= { manualTime 6 }
timeZone OBJECT-TYPE
SYNTAX INTEGER {
none (0),
gmtminus1200-International-Date-Line-West (1),
gmtminus1100-MidwayIsland-Samoa (2),
gmtminus1000-Hawaii (3),
gmtminus0900-Alaska (4),
gmtminus0800-Pacific-Time-US-and-Canada (5),
gmtminus0800-Tijuana-Baja-California (6),
gmtminus0700-Arizona (7),
gmtminus0700-Chihuahua-La-Paz-Mazatlan-New (8),
gmtminus0700-Chihuahua-La-Paz-Mazatlan-Old (9),
gmtminus0700-Mountain-Time-US-and-Canada (10),
gmtminus0600-Central-America (11),
gmtminus0600-Central-Time-US-and-Canada (12),
gmtminus0600-Guadalajara-Mexico-City-Monterrey-New (13),
gmtminus0600-Guadalajara-Mexico-City-Monterrey-Old (14),
gmtminus0600-Saskatchewan (15),
gmtminus0500-Bogota-Lima-Quito-Rio-Branco (16),
gmtminus0500-Eastern-Time-US-and-Canada (17),
gmtminus0500-Indiana-East (18),
gmtminus0430-Caracas (19),
gmtminus0400-Atlantic-Time-Canada (20),
gmtminus0400-La-Paz (21),
gmtminus0400-Manaus (22),
gmtminus0400-Santiago (23),
gmtminus0330-Newfoundland (24),
gmtminus0300-Brasilia (25),
gmtminus0300-Buenos-Aires (26),
gmtminus0300-Georgetown (27),
gmtminus0300-Greenland (28),
gmtminus0300-Montevideo (29),
gmtminus0200-Mid-Atlantic (30),
gmtminus0100-Azores (31),
gmtminus0100-Cape-Verde-Is (32),
gmt-Casablanca (33),
gmt-Greenwich-Mean-Time-Dublin-Edinburgh-Lisbon-London (34),
gmt-Monrovia-Reykjavik (35),
gmtplus0100-Amsterdam-Berlin-Bern-Rome-Stockholm-Vienna (36),
gmtplus0100-Belgrade-Bratislava-Budapest-Ljubljana-Prague (37),
gmtplus0100-Brussels-Copenhagen-Madrid-Paris (38),
gmtplus0100-Sarajevo-Skopje-Warsaw-Zagreb (39),
gmtplus0100-West-Central-Africa (40),
gmtplus0200-Amman (41),
gmtplus0200-Athens-Bucharest-Istanbul (42),
gmtplus0200-Beirut (43),
gmtplus0200-Cairo (44),
gmtplus0200-Harare-Pretoria (45),
gmtplus0200-Helsinki-Kyiv-Riga-Sofia-Tallinn-Vilnius (46),
gmtplus0200-Jerusalem (47),
gmtplus0200-Minsk (48),
gmtplus0200-Windhoek (49),
gmtplus0300-Baghdad (50),
gmtplus0300-Kuwait-Riyadh (51),
gmtplus0300-Moscow-St-Petersburg-Volgograd (52),
gmtplus0300-Nairobi (53),
gmtplus0300-Tbilisi (54),
gmtplus0330-Tehran (55),
gmtplus0400-Abu-Dhabi-Muscat (56),
gmtplus0400-Baku (57),
gmtplus0400-Caucasus-Standard-Time (58),
gmtplus0400-Port-Louis (59),
gmtplus0400-Yerevan (60),
gmtplus0430-Kabul (61),
gmtplus0500-Ekaterinburg (62),
gmtplus0500-Islamabad-Karachi (63),
gmtplus0500-Tashkent (64),
gmtplus0530-Chennai-Kolkata-Mumbai-New-Delhi (65),
gmtplus0530-Sri-Jayawardenepura (66),
gmtplus0545-Kathmandu (67),
gmtplus0600-Almaty-Novosibirsk (68),
gmtplus0600-Astana-Dhaka (69),
gmtplus0630-Yangon-Rangoon (70),
gmtplus0700-Bangkok-Hanoi-Jakarta (71),
gmtplus0700-Krasnoyarsk (72),
gmtplus0800-Beijing-Chongqing-Hong-Kong-Urumqi (73),
gmtplus0800-Irkutsk-Ulaan-Bataar (74),
gmtplus0800-Kuala-Lumpur-Singapore (75),
gmtplus0800-Perth (76),
gmtplus0800-Taipei (77),
gmtplus0900-Osaka-Sapporo-Tokyo (78),
gmtplus0900-Seoul (79),
gmtplus0900-Yakutsk (80),
gmtplus0930-Adelaide (81),
gmtplus0930-Darwin (82),
gmtplus1000-Brisbane (83),
gmtplus1000-Canberra-Melbourne-Sydney (84),
gmtplus1000-Guam-Port-Moresby (85),
gmtplus1000-Hobart (86),
gmtplus1000-Vladivostok (87),
gmtplus1100-Magadan-Solomon-Is-New-Caledonia (88),
gmtplus1200-Auckland-Wellington (89),
gmtplus1200-Fiji-Kamchatka-Marshall-Is (90),
gmtplus1300-Nuku-alofa (91)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The UTC Timezone of the switch."
::= { systemTimeSetting 3 }
daylightSaving OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
recurring(2),
no-recurring(3),
usa(4),
european(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the mode of daylight saving time.
Disable: Disable daylight saving time.
Recurring: Using recurring mode of daylight saving time
Non-Recurring: Using non-recurring mode of daylight saving time
USA: Using daylight saving time in the United States that
starts on the second Sunday of March and ends on the first
Sunday of November
European: daylight saving time in the Europe that
starts on the last Sunday of March and ends on the last
Sunday of November"
::= { systemTimeSetting 4 }
daylightSavingOffset OBJECT-TYPE
SYNTAX Integer32 (1..1440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify the adjust offset of daylight saving time"
::= { systemTimeSetting 5 }
recurringFrom OBJECT IDENTIFIER ::= { systemTimeSetting 6 }
recFromDay OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The starting day of recurring daylight saving time."
::= { recurringFrom 1 }
recFromWeek OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The starting week of recurring daylight saving time."
::= { recurringFrom 2 }
recFromMonth OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The starting month of recurring daylight saving time."
::= { recurringFrom 3 }
recFromHours OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The starting hour of recurring daylight saving time."
::= { recurringFrom 4 }
recFromMinutes OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The starting minutes of recurring daylight saving time."
::= { recurringFrom 5 }
recurringTo OBJECT IDENTIFIER ::= { systemTimeSetting 7 }
recToDay OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ending day of recurring daylight saving time."
::= { recurringTo 1 }
recToWeek OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ending week of recurring daylight saving time."
::= { recurringTo 2 }
recToMonth OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ending month of recurring daylight saving time."
::= { recurringTo 3 }
recToHours OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ending hour of recurring daylight saving time."
::= { recurringTo 4 }
recToMinutes OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ending minute of recurring daylight saving time."
::= { recurringTo 5 }
nonRecurringFrom OBJECT IDENTIFIER ::= { systemTimeSetting 8 }
nonRecFromYear OBJECT-TYPE
SYNTAX Integer32 (2000..2037)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The starting year of non-recurring daylight saving time."
::= { nonRecurringFrom 1 }
nonRecFromMonth OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The starting month of non-recurring daylight saving time."
::= { nonRecurringFrom 2 }
nonRecFromDay OBJECT-TYPE
SYNTAX Integer32 (1..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The starting day of non-recurring daylight saving time."
::= { nonRecurringFrom 3 }
nonRecFromHours OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The starting hour of non-recurring daylight saving time."
::= { nonRecurringFrom 4 }
nonRecFromMinutes OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The starting minute of non-recurring daylight saving time."
::= { nonRecurringFrom 5 }
nonRecurringTo OBJECT IDENTIFIER ::= { systemTimeSetting 9 }
nonRecToYear OBJECT-TYPE
SYNTAX Integer32 (2000..2037)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ending year of non-recurring daylight saving time."
::= { nonRecurringTo 1 }
nonRecToMonth OBJECT-TYPE
SYNTAX Integer32 (1..12)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ending month of non-recurring daylight saving time."
::= { nonRecurringTo 2 }
nonRecToDay OBJECT-TYPE
SYNTAX Integer32 (1..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ending day of non-recurring daylight saving time."
::= { nonRecurringTo 3 }
nonRecToHours OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ending hour of non-recurring daylight saving time."
::= { nonRecurringTo 4 }
nonRecToMinutes OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ending minute of non-recurring daylight saving time."
::= { nonRecurringTo 5 }
serverAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP address or hostname of time server"
::= { systemTimeSetting 10 }
serverPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Time server port number"
::= { systemTimeSetting 11 }
systemTimeStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If user set system time with SNMP, the value sould not apply to
switch. They need to set active(1) to apply into switch"
::= { systemTimeSetting 12 }
systemTimeInfo OBJECT IDENTIFIER ::= { systemTime 2 }
currentDateTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current Date and Time on the device."
::= { systemTimeInfo 1 }
currentSNTP OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of SNTP server."
::= { systemTimeInfo 2 }
currentSNTPServerAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP address or hostname of SNTP server."
::= { systemTimeInfo 3 }
currentSNTPServerPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port number of SNTP server."
::= { systemTimeInfo 4 }
currentTimeZone OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { systemTimeInfo 5 }
currentDaylightSavingStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { systemTimeInfo 6 }
currentDaylightSavingOffset OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { systemTimeInfo 7 }
currentDaylightSavingFrom OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { systemTimeInfo 8 }
currentDaylightSavingTo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION ""
::= { systemTimeInfo 9 }
-- system.sfp
sfpSerialInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SFPSerialInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of SFP serial info."
::= { sfp 1 }
sfpSerialInfoEntry OBJECT-TYPE
SYNTAX SFPSerialInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of SFP serial info."
INDEX { sfpPortIndex }
::= { sfpSerialInfoTable 1 }
SFPSerialInfoEntry ::= SEQUENCE {
sfpPortIndex DisplayString,
sfpConnector DisplayString,
sfpSpeed DisplayString,
sfpVendorName DisplayString,
sfpVendorPn DisplayString,
spfVendorRev DisplayString,
sfpVendorSn DisplayString,
sfpDateCode DisplayString
}
sfpPortIndex OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of SFP serial info."
::= { sfpSerialInfoEntry 1 }
sfpConnector OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SFP connector"
::= { sfpSerialInfoEntry 2 }
sfpSpeed OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SFP speed"
::= { sfpSerialInfoEntry 3 }
sfpVendorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SFP vender name"
::= { sfpSerialInfoEntry 4 }
sfpVendorPn OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SFP vendor product number"
::= { sfpSerialInfoEntry 6 }
spfVendorRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SFP vender revision"
::= { sfpSerialInfoEntry 7 }
sfpVendorSn OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SFP vendor serial number"
::= { sfpSerialInfoEntry 8 }
sfpDateCode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SFP data code"
::= { sfpSerialInfoEntry 9 }
sfpDMIInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SFPDMIInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of SFP DMI info."
::= { sfp 2 }
sfpDMIInfoEntry OBJECT-TYPE
SYNTAX SFPDMIInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of SFP DMI info."
INDEX { sfpDMIPortIndex }
::= { sfpDMIInfoTable 1 }
SFPDMIInfoEntry ::= SEQUENCE {
sfpDMIPortIndex DisplayString,
sfpDMITemperature DisplayString,
sfpDMIVoltage DisplayString,
sfpDMITxBias DisplayString,
sfpDMITxPower DisplayString,
sfpDMIRxPower DisplayString
}
sfpDMIPortIndex OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of SFP DMI info."
::= { sfpDMIInfoEntry 1 }
sfpDMITemperature OBJECT-TYPE
SYNTAX DisplayString
UNITS "C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SFP DMI temperature"
::= { sfpDMIInfoEntry 2 }
sfpDMIVoltage OBJECT-TYPE
SYNTAX DisplayString
UNITS "V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SFP DMI voltage"
::= { sfpDMIInfoEntry 3 }
sfpDMITxBias OBJECT-TYPE
SYNTAX DisplayString
UNITS "mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SFP DMI Tx bias"
::= { sfpDMIInfoEntry 4 }
sfpDMITxPower OBJECT-TYPE
SYNTAX DisplayString
UNITS "dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SFP DMI Tx power"
::= { sfpDMIInfoEntry 5 }
sfpDMIRxPower OBJECT-TYPE
SYNTAX DisplayString
UNITS "dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SFP DMI Rx power"
::= { sfpDMIInfoEntry 6 }
ddmDiagnosticAlarm OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
syslog(2),
email(3),
snmp(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DDM diagnostic alarm setting"
::= { sfp 3 }
sfpDMIAlarmInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SFPDMIAlarmInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of SFP DMI alarm info."
::= { sfp 4 }
sfpDMIAlarmInfoEntry OBJECT-TYPE
SYNTAX SFPDMIAlarmInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of SFP DMI alarm info."
INDEX { sfpDMIAlarmPortIndex }
::= { sfpDMIAlarmInfoTable 1 }
SFPDMIAlarmInfoEntry ::= SEQUENCE {
sfpDMIAlarmPortIndex DisplayString,
sfpDMITempHighAlarmState INTEGER,
sfpDMITempHighAlarmValue DisplayString,
sfpDMITempHighWarnState INTEGER,
sfpDMITempHighWarnValue DisplayString,
sfpDMITempLowAlarmState INTEGER,
sfpDMITempLowAlarmValue DisplayString,
sfpDMITempLowWarnState INTEGER,
sfpDMITempLowWarnValue DisplayString,
sfpDMIVoltageHighAlarmState INTEGER,
sfpDMIVoltageHighAlarmValue DisplayString,
sfpDMIVoltageHighWarnState INTEGER,
sfpDMIVoltageHighWarnValue DisplayString,
sfpDMIVoltageLowAlarmState INTEGER,
sfpDMIVoltageLowAlarmValue DisplayString,
sfpDMIVoltageLowWarnState INTEGER,
sfpDMIVoltageLowWarnValue DisplayString,
sfpDMITxBasisHighAlarmState INTEGER,
sfpDMITxBasisHighAlarmValue DisplayString,
sfpDMITxBasisHighWarnState INTEGER,
sfpDMITxBasisHighWarnValue DisplayString,
sfpDMITxBasisLowAlarmState INTEGER,
sfpDMITxBasisLowAlarmValue DisplayString,
sfpDMITxBasisLowWarnState INTEGER,
sfpDMITxBasisLowWarnValue DisplayString,
sfpDMITxPowerHighAlarmState INTEGER,
sfpDMITxPowerHighAlarmValue DisplayString,
sfpDMITxPowerHighWarnState INTEGER,
sfpDMITxPowerHighWarnValue DisplayString,
sfpDMITxPowerLowAlarmState INTEGER,
sfpDMITxPowerLowAlarmValue DisplayString,
sfpDMITxPowerLowWarnState INTEGER,
sfpDMITxPowerLowWarnValue DisplayString,
sfpDMIRxPowerHighAlarmState INTEGER,
sfpDMIRxPowerHighAlarmValue DisplayString,
sfpDMIRxPowerHighWarnState INTEGER,
sfpDMIRxPowerHighWarnValue DisplayString,
sfpDMIRxPowerLowAlarmState INTEGER,
sfpDMIRxPowerLowAlarmValue DisplayString,
sfpDMIRxPowerLowWarnState INTEGER,
sfpDMIRxPowerLowWarnValue DisplayString
}
sfpDMIAlarmPortIndex OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of SFP DMI alarm info."
::= { sfpDMIAlarmInfoEntry 1 }
sfpDMITempHighAlarmState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI temperature high alarm"
::= { sfpDMIAlarmInfoEntry 2 }
sfpDMITempHighAlarmValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "C"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI temperature high alarm.
The value range is 127 Degrees C ~ -127 Degrees C"
::= { sfpDMIAlarmInfoEntry 3 }
sfpDMITempHighWarnState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI temperature high warning"
::= { sfpDMIAlarmInfoEntry 4 }
sfpDMITempHighWarnValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "C"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI temperature high warning.
The value range is 127 Degrees C ~ -127 Degrees C"
::= { sfpDMIAlarmInfoEntry 5 }
sfpDMITempLowAlarmState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI temperature low alarm"
::= { sfpDMIAlarmInfoEntry 6 }
sfpDMITempLowAlarmValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "C"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI temperature low alarm.
The value range is 127 Degrees C ~ -127 Degrees C"
::= { sfpDMIAlarmInfoEntry 7 }
sfpDMITempLowWarnState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI temperature low warning"
::= { sfpDMIAlarmInfoEntry 8 }
sfpDMITempLowWarnValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "C"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI temperature low warning.
The value range is 127 Degrees C ~ -127 Degrees C"
::= { sfpDMIAlarmInfoEntry 9 }
sfpDMIVoltageHighAlarmState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI voltage high alarm"
::= { sfpDMIAlarmInfoEntry 10 }
sfpDMIVoltageHighAlarmValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "V"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI voltage high alarm.
The value range is 0.001~6V"
::= { sfpDMIAlarmInfoEntry 11 }
sfpDMIVoltageHighWarnState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI voltage high warning"
::= { sfpDMIAlarmInfoEntry 12 }
sfpDMIVoltageHighWarnValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "V"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI voltage high warning.
The value range is 0.001~6V"
::= { sfpDMIAlarmInfoEntry 13 }
sfpDMIVoltageLowAlarmState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI voltage low alarm"
::= { sfpDMIAlarmInfoEntry 14 }
sfpDMIVoltageLowAlarmValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "V"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI voltage low alarm.
The value range is 0.001~6V"
::= { sfpDMIAlarmInfoEntry 15 }
sfpDMIVoltageLowWarnState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI voltage low warning"
::= { sfpDMIAlarmInfoEntry 16 }
sfpDMIVoltageLowWarnValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "V"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI voltage low warning.
The value range is 0.001~6V"
::= { sfpDMIAlarmInfoEntry 17 }
sfpDMITxBasisHighAlarmState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI TX Basis high alarm"
::= { sfpDMIAlarmInfoEntry 18 }
sfpDMITxBasisHighAlarmValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "mA"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI TX Basis high alarm.
The value range is 1~131mA"
::= { sfpDMIAlarmInfoEntry 19 }
sfpDMITxBasisHighWarnState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI TX Basis high warning"
::= { sfpDMIAlarmInfoEntry 20 }
sfpDMITxBasisHighWarnValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "mA"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI TX Basis high warning.
The value range is 1~131mA"
::= { sfpDMIAlarmInfoEntry 21 }
sfpDMITxBasisLowAlarmState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI TX Basis low alarm"
::= { sfpDMIAlarmInfoEntry 22 }
sfpDMITxBasisLowAlarmValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "mA"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI TX Basis low alarm.
The value range is 1~131mA"
::= { sfpDMIAlarmInfoEntry 23 }
sfpDMITxBasisLowWarnState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI TX Basis low warning"
::= { sfpDMIAlarmInfoEntry 24 }
sfpDMITxBasisLowWarnValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "mA"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI TX Basis low warning.
The value range is 1~131mA"
::= { sfpDMIAlarmInfoEntry 25 }
sfpDMITxPowerHighAlarmState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI TX power high alarm"
::= { sfpDMIAlarmInfoEntry 26 }
sfpDMITxPowerHighAlarmValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI TX power high alarm.
The value range is 8~-39dbm"
::= { sfpDMIAlarmInfoEntry 27 }
sfpDMITxPowerHighWarnState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI TX power high warning"
::= { sfpDMIAlarmInfoEntry 28 }
sfpDMITxPowerHighWarnValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI TX power high warning.
The value range is 8~-39dbm"
::= { sfpDMIAlarmInfoEntry 29 }
sfpDMITxPowerLowAlarmState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI TX power low alarm"
::= { sfpDMIAlarmInfoEntry 30 }
sfpDMITxPowerLowAlarmValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI TX power low alarm.
The value range is 8~-39dbm"
::= { sfpDMIAlarmInfoEntry 31 }
sfpDMITxPowerLowWarnState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI TX power low warning"
::= { sfpDMIAlarmInfoEntry 32 }
sfpDMITxPowerLowWarnValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI TX power low warning.
The value range is 8~-39dbm"
::= { sfpDMIAlarmInfoEntry 33 }
sfpDMIRxPowerHighAlarmState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI RX power high alarm"
::= { sfpDMIAlarmInfoEntry 34 }
sfpDMIRxPowerHighAlarmValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI RX power high alarm.
The value range is 8~-39dbm"
::= { sfpDMIAlarmInfoEntry 35 }
sfpDMIRxPowerHighWarnState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI RX power high warning"
::= { sfpDMIAlarmInfoEntry 36 }
sfpDMIRxPowerHighWarnValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI RX power high warning.
The value range is 8~-39dbm"
::= { sfpDMIAlarmInfoEntry 37 }
sfpDMIRxPowerLowAlarmState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI RX power low alarm"
::= { sfpDMIAlarmInfoEntry 38 }
sfpDMIRxPowerLowAlarmValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI RX power low alarm.
The value range is 8~-39dbm"
::= { sfpDMIAlarmInfoEntry 39 }
sfpDMIRxPowerLowWarnState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of SFP DMI RX power low warning"
::= { sfpDMIAlarmInfoEntry 40 }
sfpDMIRxPowerLowWarnValue OBJECT-TYPE
SYNTAX DisplayString
UNITS "dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of SFP DMI RX power low warning.
The value range is 8~-39dbm"
::= { sfpDMIAlarmInfoEntry 41 }
-- system.dhcpClientOpt82
dhcpClientOpt82Status OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION ""
::= { dhcpClientOpt82 1 }
dhcpClientOpt82CircuitIDFormat OBJECT-TYPE
SYNTAX INTEGER {
string(1),
hex(2),
userDefined(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION ""
::= { dhcpClientOpt82 2 }
dhcpClientOpt82CircuitIDString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION ""
::= { dhcpClientOpt82 3 }
dhcpClientOpt82CircuitIDHex OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION ""
::= { dhcpClientOpt82 4 }
dhcpClientOpt82CircuitIDUserDefine OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION ""
::= { dhcpClientOpt82 5 }
dhcpClientOpt82RemoteIDFormat OBJECT-TYPE
SYNTAX INTEGER {
string(1),
hex(2),
userDefined(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION ""
::= { dhcpClientOpt82 6 }
dhcpClientOpt82RemoteIDString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION ""
::= { dhcpClientOpt82 7 }
dhcpClientOpt82RemoteIDHex OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION ""
::= { dhcpClientOpt82 8 }
dhcpClientOpt82RemoteIDUserDefine OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION ""
::= { dhcpClientOpt82 9 }
-- system.networkPort
httpNetworkPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The network port of http."
::= { networkPort 1 }
httpsNetworkPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The network port of https."
::= { networkPort 2 }
telnetNetworkPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The network port of telnet."
::= { networkPort 3 }
sshNetworkPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The network port of ssh."
::= { networkPort 4 }
-- l2switching
portSetting OBJECT IDENTIFIER ::= { l2switching 1 }
mirror OBJECT IDENTIFIER ::= { l2switching 2 }
lag OBJECT IDENTIFIER ::= { l2switching 3 }
vlan OBJECT IDENTIFIER ::= { l2switching 4 }
eee OBJECT IDENTIFIER ::= { l2switching 5 }
multicast OBJECT IDENTIFIER ::= { l2switching 6 }
jamboFrame OBJECT IDENTIFIER ::= { l2switching 7 }
stp OBJECT IDENTIFIER ::= { l2switching 8 }
qinqVlan OBJECT IDENTIFIER ::= { l2switching 9 }
garp OBJECT IDENTIFIER ::= { l2switching 10 }
gvrp OBJECT IDENTIFIER ::= { l2switching 11 }
xRingElite OBJECT IDENTIFIER ::= { l2switching 12 }
loopback OBJECT IDENTIFIER ::= { l2switching 13 }
xRingPro OBJECT IDENTIFIER ::= { l2switching 14 }
gmrp OBJECT IDENTIFIER ::= { l2switching 15 }
erps OBJECT IDENTIFIER ::= { l2switching 16 }
-- l2switching.portSetting
portSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of port setting."
::= { portSetting 1 }
portSettingEntry OBJECT-TYPE
SYNTAX PortSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of port setting."
INDEX { portSettingIndex }
::= { portSettingTable 1 }
PortSettingEntry ::= SEQUENCE{
portSettingIndex Integer32,
description DisplayString,
enableState INTEGER,
linkStatus INTEGER,
speed INTEGER,
duplex INTEGER,
flowControlConfig INTEGER,
flowControlStatus INTEGER
}
portSettingIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of port setting."
::= { portSettingEntry 1 }
description OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Port description"
::= { portSettingEntry 2 }
enableState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Port admin state"
::= { portSettingEntry 3 }
linkStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port link status"
::= { portSettingEntry 4 }
speed OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
auto-10M(2),
auto-100M(3),
auto-1000M(4),
auto-10M-100M(5),
fixed-10M(6),
fixed-100M(7),
fixed-1000M(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Port speed capabilities"
::= { portSettingEntry 5 }
duplex OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
half(2),
full(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Port duplex capabilities"
::= { portSettingEntry 6 }
flowControlConfig OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Port flow control setting"
::= { portSettingEntry 7 }
flowControlStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port flow control status"
::= { portSettingEntry 8 }
-- swithcing.mirror
mirrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF MirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of mirror funciton"
::= { mirror 1 }
mirrorEntry OBJECT-TYPE
SYNTAX MirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of mirror funciton"
INDEX { sessionId }
::= { mirrorTable 1 }
MirrorEntry ::= SEQUENCE{
sessionId Integer32,
monitorSessionState INTEGER,
destinationPort Integer32,
ingressState INTEGER,
sourceTxPort BITS,
sourceRxPort BITS
}
sessionId OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mirror session ID"
::= { mirrorEntry 1 }
monitorSessionState OBJECT-TYPE
SYNTAX INTEGER {
port-based(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Mirror session state"
::= { mirrorEntry 2 }
destinationPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Mirror session destination port"
::= { mirrorEntry 3 }
ingressState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Destination port ingress state"
::= { mirrorEntry 4 }
sourceTxPort OBJECT-TYPE
SYNTAX BITS {
port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9),
port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19),
port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29),
port31(30), port32(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Mirror session source tx ports only select portbased-enabled
state."
::= { mirrorEntry 5 }
sourceRxPort OBJECT-TYPE
SYNTAX BITS {
port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9),
port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19),
port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29),
port31(30), port32(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Mirror session source rx ports only select portbased-enabled
state"
::= { mirrorEntry 6 }
-- l2switching.lag
loadBalanceAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
mac-address(1),
ip-mac-address(2),
source-port(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "LAG load balance distribution algorithm.
MAC Address: Based on source and destination MAC
address for all packets
IP/MAC Address: Based on source and destination
IP addresses for IP packet, and source and destination
MAC address for non-IP packets.
Source Port: Based on Source Port for all packets."
::= { lag 1 }
lagManagementTable OBJECT-TYPE
SYNTAX SEQUENCE OF LagManagementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of LAG management"
::= { lag 2 }
lagManagementEntry OBJECT-TYPE
SYNTAX LagManagementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of LAG management"
INDEX { lagIndex }
::= { lagManagementTable 1 }
LagManagementEntry ::= SEQUENCE{
lagIndex Integer32,
lagName DisplayString,
lagType INTEGER,
lagPorts BITS,
lagLinkState INTEGER,
lagActiveMember DisplayString,
lagStandbyMember DisplayString
}
lagIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of LAG management"
::= { lagManagementEntry 1 }
lagName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "LAG port name"
::= { lagManagementEntry 2 }
lagType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
lacp(2),
none(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the type of the LAG
Static: The group of ports assigned to a static LAG
are always active members.
LACP: The group of ports assigned to dynamic LAG
are candidate ports. LACP determines which candidate
ports are active member ports."
::= { lagManagementEntry 3 }
lagPorts OBJECT-TYPE
SYNTAX BITS {
port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9),
port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19),
port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29),
port31(30), port32(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the trunk member ports in this field"
::= { lagManagementEntry 4 }
lagLinkState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
not-present(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LAG port link status"
::= { lagManagementEntry 5 }
lagActiveMember OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Active member ports of the LAG"
::= { lagManagementEntry 6 }
lagStandbyMember OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Inactive or candidate member ports of the LAG"
::= { lagManagementEntry 7 }
lagPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LagPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of LAG port"
::= { lag 3 }
lagPortEntry OBJECT-TYPE
SYNTAX LagPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of LAG port"
INDEX { lagPortIndex }
::= { lagPortTable 1 }
LagPortEntry ::= SEQUENCE{
lagPortIndex Integer32,
lagPortDescription DisplayString,
lagPortType DisplayString,
lagPortEnableState INTEGER,
lagPortLinkStatus INTEGER,
lagPortSpeed INTEGER,
lagPortDuplex INTEGER,
lagPortFlowCtrlConfig INTEGER,
lagPortFlowCtrlStatus INTEGER
}
lagPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of LAG port"
::= { lagPortEntry 1 }
lagPortDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The description of the LAG port"
::= { lagPortEntry 2 }
lagPortType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Member port media type"
::= { lagPortEntry 3 }
lagPortEnableState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "LAG port admin state"
::= { lagPortEntry 4 }
lagPortLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LAG port link status"
::= { lagPortEntry 5 }
lagPortSpeed OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
auto-10M(2),
auto-100M(3),
auto-1000M(4),
auto-10M-100M(5),
fixed-10M(6),
fixed-100M(7),
fixed-1000M(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Current LAG port speed"
::= { lagPortEntry 6 }
lagPortDuplex OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
half(2),
full(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current LAG port duplex"
::= { lagPortEntry 7 }
lagPortFlowCtrlConfig OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "LAG port flow control configuration"
::= { lagPortEntry 8 }
lagPortFlowCtrlStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current LAG port flow control state"
::= { lagPortEntry 9 }
lacpSystemPriority OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configure the system priority of LACP"
::= { lag 4 }
lacpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of LACP Port"
::= { lag 5 }
lacpPortEntry OBJECT-TYPE
SYNTAX LacpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of LACP Port"
INDEX { lacpPortIndex }
::= { lacpPortTable 1 }
LacpPortEntry ::= SEQUENCE{
lacpPortIndex Integer32,
lacpPriority Integer32,
lacpTimeout INTEGER,
lacpPortMode INTEGER
}
lacpPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of LACP Port"
::= { lacpPortEntry 1 }
lacpPriority OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "LACP priority of the port"
::= { lacpPortEntry 2 }
lacpTimeout OBJECT-TYPE
SYNTAX INTEGER {
long(1),
short(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The periodic transmissions of LACP PDUs
Long: Transmit LACP PDU with slow periodic (30s).
Short: Transmit LACPP DU with fast periodic (1s)."
::= { lacpPortEntry 3 }
lacpPortMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "LACP mode of the port"
::= { lacpPortEntry 4 }
-- l2switching.vlan
vlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of VLAN"
::= { vlan 1 }
vlanEntry OBJECT-TYPE
SYNTAX VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of VLAN"
INDEX { vlanIndex }
::= { vlanTable 1 }
VlanEntry ::= SEQUENCE{
vlanIndex Integer32,
vlanId Integer32,
vlanNamePrefix DisplayString,
vlanType INTEGER,
vlanRowStatus INTEGER
}
vlanIndex OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The index of VLAN"
::= { vlanEntry 1 }
vlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VLAN ID"
::= { vlanEntry 2 }
vlanNamePrefix OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The prefix string of the VLAN name"
::= { vlanEntry 3 }
vlanType OBJECT-TYPE
SYNTAX INTEGER {
default(1),
static(2),
dyanmic(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The VLAN type"
::= { vlanEntry 4 }
vlanRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2),
createAndWait(5),
destory(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry."
::= { vlanEntry 99 }
vlanInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of the VLN inetrface"
::= { vlan 2 }
vlanInterfaceEntry OBJECT-TYPE
SYNTAX VlanInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of the VLN inetrface"
INDEX { vlanPortIndex }
::= { vlanInterfaceTable 1 }
VlanInterfaceEntry ::= SEQUENCE{
vlanPortIndex Integer32,
vlanInterfaceVlanMode INTEGER,
vlanPvid Integer32,
vlanAcceptedType INTEGER,
vlanIngressFiltering INTEGER
}
vlanPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of the VLAN interface"
::= { vlanInterfaceEntry 1 }
vlanInterfaceVlanMode OBJECT-TYPE
SYNTAX INTEGER {
hybrid(1),
access(2),
trunk(3),
tunnel(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VLAN mode for the interface.
Hybrid: support all functions as defined in IEEE 802.1Q
Access: Accepts only untagged frames and join an untagged VLAN
Trunk: An ubtagged member of one VLAN at most, and is a tagged
member of zero or more VLANs.
Tunnel: Port-based Q-in-Q mode"
::= { vlanInterfaceEntry 2 }
vlanPvid OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port-based VLAN ID, It only available with Hybrid and Trunk mode."
::= { vlanInterfaceEntry 3 }
vlanAcceptedType OBJECT-TYPE
SYNTAX INTEGER {
all(1),
tag-only(2),
untag-only(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the acceptable-frame-type of the specified interfaces. It is
only available with Hybrid mode."
::= { vlanInterfaceEntry 4 }
vlanIngressFiltering OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disbale(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the status of ingress filtering. It is only available with
Hybrid mode."
::= { vlanInterfaceEntry 5 }
portToVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortToVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of Port to VLAN"
::= { vlan 3 }
portToVlanEntry OBJECT-TYPE
SYNTAX PortToVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of Port to VLAN"
INDEX { portToVlanVlanIndex }
::= { portToVlanTable 1 }
PortToVlanEntry ::= SEQUENCE{
portToVlanVlanIndex Integer32,
portToVlanPortIndex Integer32,
portToVlanVlanId Integer32,
portToVlanInterfaceVlanMode INTEGER,
portToVlanMembership INTEGER,
portToVlanPvid INTEGER
}
portToVlanVlanIndex OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of Port to VLAN"
::= { portToVlanEntry 1 }
portToVlanPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of Port to VLAN"
::= { portToVlanEntry 2 }
portToVlanVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VLAN ID"
::= { portToVlanEntry 3 }
portToVlanInterfaceVlanMode OBJECT-TYPE
SYNTAX INTEGER {
hybrid(1),
access(2),
trunk(3),
tunnel(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display the interface VLAN mode of this port"
::= { portToVlanEntry 4 }
portToVlanMembership OBJECT-TYPE
SYNTAX INTEGER {
forbidden(1),
exclued(2),
tagged(3),
untagged(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the membership for this port with the specified VLAN ID.
Forbidden: Specify the port is forbidden in the VLAN.
Excluded: Specify the port is excluded in the VLAN.
Tagged: Specify the port is tagged in the VLAN.
Untagged: Specify the port is untagged in the VLAN."
::= { portToVlanEntry 5 }
portToVlanPvid OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the VLAN ID to be the port-based
VLAN ID for this port."
::= { portToVlanEntry 6 }
portVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of port VLAN"
::= { vlan 4 }
portVlanEntry OBJECT-TYPE
SYNTAX PortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of port VLAN"
INDEX { portVlanPortIndex }
::= { portVlanTable 1 }
PortVlanEntry ::= SEQUENCE{
portVlanPortIndex Integer32,
portVlanPortMode INTEGER,
portVlanAdminVlans DisplayString,
portVlanOperVlans DisplayString
}
portVlanPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of port VLAN"
::= { portVlanEntry 1 }
portVlanPortMode OBJECT-TYPE
SYNTAX INTEGER {
hybrid(1),
access(2),
trunk(3),
tunnel(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the interface VLAN mode of this port"
::= { portVlanEntry 2 }
portVlanAdminVlans OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the administrative VLAN list of this port"
::= { portVlanEntry 3 }
portVlanOperVlans OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational VLAN list of this port"
::= { portVlanEntry 4 }
voiceVlan OBJECT IDENTIFIER ::= { vlan 5 }
voiceVlanState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Voice VLAN state"
::= { voiceVlan 1 }
voiceVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Voice VLAN ID"
::= { voiceVlan 2 }
voiceVlanRemarkCos-8021p OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "a value of vpt that will be advertised by LLDP-MED"
::= { voiceVlan 3 }
voiceVlanRemark1q OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "1p remark state"
::= { voiceVlan 4 }
voiceVlanAgingTime OBJECT-TYPE
SYNTAX Integer32 (30..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "value of aging time"
::= { voiceVlan 5 }
telephonyOUITable OBJECT-TYPE
SYNTAX SEQUENCE OF TelephonyOUIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of OUI"
::= { voiceVlan 6 }
telephonyOUIEntry OBJECT-TYPE
SYNTAX TelephonyOUIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of OUI"
INDEX { telephonyOUIIndex }
::= { telephonyOUITable 1 }
TelephonyOUIEntry ::= SEQUENCE{
telephonyOUIIndex Integer32,
telephonyOUIAddress DisplayString,
telephonyOUIDescription DisplayString,
telephonyOUIRowStatus INTEGER
}
telephonyOUIIndex OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of OUI"
::= { telephonyOUIEntry 1 }
telephonyOUIAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "oui address"
::= { telephonyOUIEntry 2 }
telephonyOUIDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "description of the specified MAC address to the voice VLAN OUI
table"
::= { telephonyOUIEntry 3 }
telephonyOUIRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2),
createAndWait(5),
destory(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry."
::= { telephonyOUIEntry 99 }
telephonyOUIPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF TelephonyOUIPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of OUI port"
::= { voiceVlan 7 }
telephonyOUIPortEntry OBJECT-TYPE
SYNTAX TelephonyOUIPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of OUI port"
INDEX { telephonyOUIPortIndex }
::= { telephonyOUIPortTable 1 }
TelephonyOUIPortEntry ::= SEQUENCE{
telephonyOUIPortIndex Integer32,
telephonyOUIState INTEGER,
telephonyOUICosMode INTEGER
}
telephonyOUIPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of OUI port"
::= { telephonyOUIPortEntry 1 }
telephonyOUIState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Ingress/Egress type value"
::= { telephonyOUIPortEntry 2 }
telephonyOUICosMode OBJECT-TYPE
SYNTAX INTEGER {
all(1),
src(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "port cos mode
Src: QoS attributes are applied to packets with OUIs in the source
MAC address.
All: QoS attributes are applied to packets that are classified to the
Voice VLAN"
::= { telephonyOUIPortEntry 3 }
interfaceVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF InterfaceVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of interface VLAN"
::= { vlan 6 }
interfaceVlanEntry OBJECT-TYPE
SYNTAX InterfaceVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of interface VLAN"
INDEX { interfaceVlanIndex }
::= { interfaceVlanTable 1 }
InterfaceVlanEntry ::= SEQUENCE{
interfaceVlanIndex Integer32,
interfaceVlanId Integer32,
interfaceVlanName DisplayString,
interfaceVlanRowStatus INTEGER
}
interfaceVlanIndex OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The index of interface VLAN"
::= { interfaceVlanEntry 1 }
interfaceVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interface VLAN ID"
::= { interfaceVlanEntry 2 }
interfaceVlanName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of interface VLAN"
::= { interfaceVlanEntry 3 }
interfaceVlanRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2),
createAndWait(5),
destory(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry."
::= { interfaceVlanEntry 99 }
-- l2switching.eee
eeePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF EeePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of EEE Port"
::= { eee 1 }
eeePortEntry OBJECT-TYPE
SYNTAX EeePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of EEE Port"
INDEX { eeePortIndex }
::= { eeePortTable 1 }
EeePortEntry ::= SEQUENCE{
eeePortIndex Integer32,
eeeState INTEGER
}
eeePortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of EEE Port"
::= { eeePortEntry 1 }
eeeState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Port EEE function."
::= { eeePortEntry 2 }
-- l2switching.multicast
unknownMulticastAction OBJECT-TYPE
SYNTAX INTEGER {
drop(1),
flood(2),
routerPort(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the unknown multicast action
Drop: drop the unknown multicast data.
Flood: flood the unknown multicast data.
Router port: forward the unknown multicast data to router
port."
::= { multicast 1 }
forwardMethod OBJECT-TYPE
SYNTAX INTEGER {
mac(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "the multicast forward method.
MAC: forward method dmac+vid."
::= { multicast 2 }
igmpSnooping OBJECT IDENTIFIER ::= { multicast 3 }
igmpSnoopingState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the enabling status of IGMP functionality"
::= { igmpSnooping 1 }
igmpSnoopingVersion OBJECT-TYPE
SYNTAX INTEGER {
v2(1),
v3(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the igmp snooping version
v2: Only support process igmp v2 packet.
v3: Support v3 basic and v2."
::= { igmpSnooping 2 }
igmpSnoopingReportSuppression OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the enabling status of IGMP v2 report suppression"
::= { igmpSnooping 3 }
igmpSnoopingTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of IGMP snooping"
::= { igmpSnooping 4 }
igmpSnoopingEntry OBJECT-TYPE
SYNTAX IgmpSnoopingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of IGMP snooping"
INDEX { igmpSnoopingIndex }
::= { igmpSnoopingTable 1 }
IgmpSnoopingEntry ::= SEQUENCE{
igmpSnoopingIndex Integer32,
igmpSnoopingVlanId Integer32,
igmpSnoopStatus INTEGER,
routerPortsAutoLearn INTEGER,
queryRobustness Integer32,
queryInterval Integer32,
queryMaxResponseInterval Integer32,
lastMemberQueryCounter Integer32,
lastMemberQueryInterval Integer32,
immediateLeave INTEGER,
operQueryRobustness Integer32,
operQueryInterval Integer32,
operQueryMaxResponseInterval Integer32,
operLastMemberQueryCounter Integer32,
operLastMemberQueryInterval Integer32
}
igmpSnoopingIndex OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of IGMP snooping"
::= { igmpSnoopingEntry 1 }
igmpSnoopingVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4904)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IGMP entry VLAN ID"
::= { igmpSnoopingEntry 2 }
igmpSnoopStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The enable status of IGMP VLAN functionality"
::= { igmpSnoopingEntry 3 }
routerPortsAutoLearn OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The enable statue of IGMP router port learning."
::= { igmpSnoopingEntry 4 }
queryRobustness OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Robusstness Variable allows tuning for the expected packet loss
on a subnet"
::= { igmpSnoopingEntry 5 }
queryInterval OBJECT-TYPE
SYNTAX Integer32 (30..18000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interval of querier send general query"
::= { igmpSnoopingEntry 6 }
queryMaxResponseInterval OBJECT-TYPE
SYNTAX Integer32 (5..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "In Membership Query Message, it specifies the maximum allowed
time before sending a responding report in units of 1/10 second"
::= { igmpSnoopingEntry 7 }
lastMemberQueryCounter OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The count that Querier-switch sends Group-Specific Queriers when
it receives a Leave Group message for a group"
::= { igmpSnoopingEntry 8 }
lastMemberQueryInterval OBJECT-TYPE
SYNTAX Integer32 (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interval that Querier-switch sends Group-Specific Queriers
when it receives a Leave Group Message for a group"
::= { igmpSnoopingEntry 9 }
immediateLeave OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Leave the group when receive IGMP Leave message."
::= { igmpSnoopingEntry 10 }
operQueryRobustness OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operation query robustness."
::= { igmpSnoopingEntry 11 }
operQueryInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operation query interval."
::= { igmpSnoopingEntry 12 }
operQueryMaxResponseInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operating query max response interval."
::= { igmpSnoopingEntry 13 }
operLastMemberQueryCounter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operating last member query counter."
::= { igmpSnoopingEntry 14 }
operLastMemberQueryInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operation last member query interval."
::= { igmpSnoopingEntry 15 }
igmpQuerierTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpQuerierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of IGMP querier"
::= { igmpSnooping 5 }
igmpQuerierEntry OBJECT-TYPE
SYNTAX IgmpQuerierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of IGMP querier"
INDEX { igmpQuerierVlanId }
::= { igmpQuerierTable 1 }
IgmpQuerierEntry ::= SEQUENCE{
igmpQuerierVlanId Integer32,
igmpQuerierState INTEGER,
igmpQuerierStatus INTEGER,
igmpQuerierVersion INTEGER,
igmpQuerierIP DisplayString
}
igmpQuerierVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The VLAN ID of IGMP querier"
::= { igmpQuerierEntry 1 }
igmpQuerierState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The enabling status of IGMP Querier Election on the chose
VLANs"
::= { igmpQuerierEntry 2 }
igmpQuerierStatus OBJECT-TYPE
SYNTAX INTEGER {
querier(1),
nonQuerier(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enabling status of IGMP Querier Election on the chose
VLANs"
::= { igmpQuerierEntry 3 }
igmpQuerierVersion OBJECT-TYPE
SYNTAX INTEGER {
v2(1),
v3(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The query version of IGMP Querier Election on the chose
VLANs"
::= { igmpQuerierEntry 4 }
igmpQuerierIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The query IP address of IGMP Querier Election on the chose
VLANs"
::= { igmpQuerierEntry 5 }
igmpStaticGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpStaticGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of IGMP static group"
::= { igmpSnooping 6 }
igmpStaticGroupEntry OBJECT-TYPE
SYNTAX IgmpStaticGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of IGMP static group"
INDEX { igmpStaticGroupIndex }
::= { igmpStaticGroupTable 1 }
IgmpStaticGroupEntry ::= SEQUENCE{
igmpStaticGroupIndex Integer32,
igmpStaticGroupVlanId Integer32,
igmpStaticGroupIPaddress IpAddress,
igmpStaticGroupMemberPorts BITS,
igmpStaticGroupRowStatus INTEGER
}
igmpStaticGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of IGMP static group"
::= { igmpStaticGroupEntry 1 }
igmpStaticGroupVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VLAN ID of IGMP static group"
::= { igmpStaticGroupEntry 2 }
igmpStaticGroupIPaddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of this group"
::= { igmpStaticGroupEntry 3 }
igmpStaticGroupMemberPorts OBJECT-TYPE
SYNTAX BITS {
port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9),
port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19),
port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29),
port31(30), port32(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The member ports of this group"
::= { igmpStaticGroupEntry 4 }
igmpStaticGroupRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2),
createAndWait(5),
destory(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry."
::= { igmpStaticGroupEntry 99 }
igmpGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of IGMP group"
::= { igmpSnooping 7 }
igmpGroupEntry OBJECT-TYPE
SYNTAX IgmpGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of IGMP group"
INDEX { igmpGroupVlanId }
::= { igmpGroupTable 1 }
IgmpGroupEntry ::= SEQUENCE{
igmpGroupVlanId Integer32,
igmpGroupIPaddress IpAddress,
igmpGroupMemberPorts DisplayString,
igmpGroupType INTEGER,
igmpGroupLife Integer32
}
igmpGroupVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The VLAN ID of IGMP group"
::= { igmpGroupEntry 1 }
igmpGroupIPaddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group IP address of this group"
::= { igmpGroupEntry 2 }
igmpGroupMemberPorts OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The member ports of this group"
::= { igmpGroupEntry 3 }
igmpGroupType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
dynamic(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of this group"
::= { igmpGroupEntry 4 }
igmpGroupLife OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The life time of this group"
::= { igmpGroupEntry 5 }
igmpRouterTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of IGMP router"
::= { igmpSnooping 8 }
igmpRouterEntry OBJECT-TYPE
SYNTAX IgmpRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of IGMP router"
INDEX { igmpRouterVlanId }
::= { igmpRouterTable 1 }
IgmpRouterEntry ::= SEQUENCE{
igmpRouterVlanId Integer32,
igmpRouterPort DisplayString,
igmpRouterExpireTime Integer32
}
igmpRouterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The VLAN ID of the IGMP router."
::= { igmpRouterEntry 1 }
igmpRouterPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port of the IGMP router."
::= { igmpRouterEntry 2 }
igmpRouterExpireTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expire time of the IGMP router."
::= { igmpRouterEntry 3 }
-- l2switching.multicast.mldSnooping
mldSnooping OBJECT IDENTIFIER ::= { multicast 4 }
mldSnoopingState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the enabling status of MLD functionality"
::= { mldSnooping 1 }
mldSnoopingVersion OBJECT-TYPE
SYNTAX INTEGER {
v1(1),
v2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the MLD snooping version"
::= { mldSnooping 2 }
mldSnoopingReportSuppression OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the enabling status of MLD report suppression"
::= { mldSnooping 3 }
mldSnoopingTable OBJECT-TYPE
SYNTAX SEQUENCE OF MLDSnoopingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of MLD snooping"
::= { mldSnooping 4 }
mldSnoopingEntry OBJECT-TYPE
SYNTAX MLDSnoopingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of MLD snooping"
INDEX { mldSnoopingIndex }
::= { mldSnoopingTable 1 }
MLDSnoopingEntry ::= SEQUENCE{
mldSnoopingIndex Integer32,
mldSnoopingVlanId Integer32,
mldSnoopStatus INTEGER,
mldSnoopRouterPortsAutoLearn INTEGER,
mldSnoopQueryRobustness Integer32,
mldSnoopQueryInterval Integer32,
mldSnoopQueryMaxResponseInterval Integer32,
mldSnoopLastMemberQueryCounter Integer32,
mldSnoopLastMemberQueryInterval Integer32,
mldSnoopImmediateLeave INTEGER,
operMldSnoopQueryRobustness Integer32,
operMldSnoopQueryInterval Integer32,
operMldSnoopQueryMaxResponseInterval Integer32,
operMldSnoopLastMemberQueryCounter Integer32,
operMldSnoopLastMemberQueryInterval Integer32
}
mldSnoopingIndex OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of MLD snooping"
::= { mldSnoopingEntry 1 }
mldSnoopingVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4904)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MLD entry VLAN ID"
::= { mldSnoopingEntry 2 }
mldSnoopStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The enable status of MLD VLAN functionality"
::= { mldSnoopingEntry 3 }
mldSnoopRouterPortsAutoLearn OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The enable statue of MLD router port learning."
::= { mldSnoopingEntry 4 }
mldSnoopQueryRobustness OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Robusstness Variable allows tuning for the expected packet loss
on a subnet"
::= { mldSnoopingEntry 5 }
mldSnoopQueryInterval OBJECT-TYPE
SYNTAX Integer32 (30..18000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interval of querier send general query"
::= { mldSnoopingEntry 6 }
mldSnoopQueryMaxResponseInterval OBJECT-TYPE
SYNTAX Integer32 (5..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "In Membership Query Message, it specifies the maximum allowed
time before sending a responding report in units of 1/10 second"
::= { mldSnoopingEntry 7 }
mldSnoopLastMemberQueryCounter OBJECT-TYPE
SYNTAX Integer32 (1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The count that Querier-switch sends Group-Specific Queriers when
it receives a Leave Group message for a group"
::= { mldSnoopingEntry 8 }
mldSnoopLastMemberQueryInterval OBJECT-TYPE
SYNTAX Integer32 (1..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interval that Querier-switch sends Group-Specific Queriers
when it receives a Leave Group Message for a group"
::= { mldSnoopingEntry 9 }
mldSnoopImmediateLeave OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Leave the group when receive MLD Leave message."
::= { mldSnoopingEntry 10 }
operMldSnoopQueryRobustness OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operation MLD query robustness."
::= { mldSnoopingEntry 11 }
operMldSnoopQueryInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operation MLD query interval."
::= { mldSnoopingEntry 12 }
operMldSnoopQueryMaxResponseInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operating MLD query max response interval."
::= { mldSnoopingEntry 13 }
operMldSnoopLastMemberQueryCounter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operating MLD last member query counter."
::= { mldSnoopingEntry 14 }
operMldSnoopLastMemberQueryInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operation MLD last member query interval."
::= { mldSnoopingEntry 15 }
mldQuerierTable OBJECT-TYPE
SYNTAX SEQUENCE OF MLDQuerierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of MLD querier"
::= { mldSnooping 5 }
mldQuerierEntry OBJECT-TYPE
SYNTAX MLDQuerierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of MLD querier"
INDEX { mldQuerierVlanId }
::= { mldQuerierTable 1 }
MLDQuerierEntry ::= SEQUENCE{
mldQuerierVlanId Integer32,
mldQuerierState INTEGER,
mldQuerierStatus INTEGER,
mldQuerierVersion INTEGER,
mldQuerierIP DisplayString
}
mldQuerierVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The VLAN ID of MLD querier"
::= { mldQuerierEntry 1 }
mldQuerierState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The enabling status of MLD Querier Election on the chose
VLANs"
::= { mldQuerierEntry 2 }
mldQuerierStatus OBJECT-TYPE
SYNTAX INTEGER {
querier(1),
nonQuerier(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The querier status of MLD Querier Election on the chose
VLANs"
::= { mldQuerierEntry 3 }
mldQuerierVersion OBJECT-TYPE
SYNTAX INTEGER {
v1(1),
v2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The query version of MLD Querier Election on the chose
VLANs"
::= { mldQuerierEntry 4 }
mldQuerierIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The query IP address of MLD Querier Election on the chose
VLANs"
::= { mldQuerierEntry 5 }
mldStaticGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF MLDStaticGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of MLD static group"
::= { mldSnooping 6 }
mldStaticGroupEntry OBJECT-TYPE
SYNTAX MLDStaticGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of MLD static group"
INDEX { mldStaticGroupIndex }
::= { mldStaticGroupTable 1 }
MLDStaticGroupEntry ::= SEQUENCE{
mldStaticGroupIndex Integer32,
mldStaticGroupVlanId Integer32,
mldStaticGroupIPaddress DisplayString,
mldStaticGroupMemberPorts BITS,
mldStaticGroupRowStatus INTEGER
}
mldStaticGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of MLD static group"
::= { mldStaticGroupEntry 1 }
mldStaticGroupVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VLAN ID of MLD static group"
::= { mldStaticGroupEntry 2 }
mldStaticGroupIPaddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of this group"
::= { mldStaticGroupEntry 3 }
mldStaticGroupMemberPorts OBJECT-TYPE
SYNTAX BITS {
port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9),
port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19),
port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29),
port31(30), port32(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The member ports of this group"
::= { mldStaticGroupEntry 4 }
mldStaticGroupRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2),
createAndWait(5),
destory(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry."
::= { mldStaticGroupEntry 99 }
mldGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF MLDGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of MLD group"
::= { mldSnooping 7 }
mldGroupEntry OBJECT-TYPE
SYNTAX MLDGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of MLD group"
INDEX { mldGroupVlanId }
::= { mldGroupTable 1 }
MLDGroupEntry ::= SEQUENCE{
mldGroupVlanId Integer32,
mldGroupIPaddress DisplayString,
mldGroupMemberPorts DisplayString,
mldGroupType INTEGER,
mldGroupLife Integer32
}
mldGroupVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The VLAN ID of MLD group"
::= { mldGroupEntry 1 }
mldGroupIPaddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The group IP address of this group"
::= { mldGroupEntry 2 }
mldGroupMemberPorts OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The member ports of this group"
::= { mldGroupEntry 3 }
mldGroupType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
dynamic(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of this group"
::= { mldGroupEntry 4 }
mldGroupLife OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The life time of this group"
::= { mldGroupEntry 5 }
mldRouterTable OBJECT-TYPE
SYNTAX SEQUENCE OF MLDRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of MLD router"
::= { mldSnooping 8 }
mldRouterEntry OBJECT-TYPE
SYNTAX MLDRouterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of MLD router"
INDEX { mldRouterVlanId }
::= { mldRouterTable 1 }
MLDRouterEntry ::= SEQUENCE{
mldRouterVlanId Integer32,
mldRouterPort DisplayString,
mldRouterExpireTime Integer32
}
mldRouterVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The VLAN ID of the MLD router."
::= { mldRouterEntry 1 }
mldRouterPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port of the MLD router."
::= { mldRouterEntry 2 }
mldRouterExpireTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The expire time of the MLD router."
::= { mldRouterEntry 3 }
-- l2switching.jamboFrame
jamboFramePktSize OBJECT-TYPE
SYNTAX Integer32 (1518..9216)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Jumbo frame size"
::= { jamboFrame 1 }
-- l2switching.stp
stpEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify the STP status to be enable/disable on the switch.
Enable STP will block all switch port and SNMP set will timeout."
::= { stp 1 }
bpduForward OBJECT-TYPE
SYNTAX INTEGER {
flooding(1),
filtering(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The BPDU forwarding action when the global STP is disable"
::= { stp 2 }
pathCostMethod OBJECT-TYPE
SYNTAX INTEGER {
short(1),
long(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The path cost method of STP"
::= { stp 3 }
forceVersion OBJECT-TYPE
SYNTAX INTEGER {
stp-compatible(1),
rstp-operation(2),
mstp-operation(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The operating mode of STP
STP-compatible: IEEE 802.1D STP operation
RSTP-Operation: IEEE 802.1W operation"
::= { stp 4 }
stpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of STP port"
::= { stp 5 }
stpPortEntry OBJECT-TYPE
SYNTAX StpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of STP port"
INDEX { stpPortIndex }
::= { stpPortTable 1 }
StpPortEntry ::= SEQUENCE {
stpPortIndex Integer32,
stpAdminEnable INTEGER,
stpPathCost Integer32,
stpEdgePort INTEGER,
stpP2pMac INTEGER,
stpMigrate INTEGER
}
stpPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of STP"
::= { stpPortEntry 1 }
stpAdminEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/disable the STP port state"
::= { stpPortEntry 2 }
stpPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the port is contribution, when it is the Root Port, to the Root
Path Cost for the Bridge. (0 means 'Auto')"
::= { stpPortEntry 3 }
stpEdgePort OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the edge port configuration:
No: Force to false state (as link to a bridge).
Yes: Force to true state (as link to a host)."
::= { stpPortEntry 4 }
stpP2pMac OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the Point-to-Point port configuration:"
::= { stpPortEntry 5 }
stpMigrate OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Force to try to use the new MST/RST BPDUs, and hence to test the
hypothesis that all legacy systems that do not understand the new
BPDU formats have been removed from the LAN segment on the
port(s)."
::= { stpPortEntry 6 }
stpBridgeInfo OBJECT IDENTIFIER ::= { stp 6 }
stpBridgePriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the Bridge Priority in the CIST instance. Priority support the
following value: 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672,
32768, 36864, 40960, 45056, 49152, 53248, 57344, 61440"
::= { stpBridgeInfo 1 }
stpBridgeForwardDelay OBJECT-TYPE
SYNTAX Integer32 (4..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the delay time an interface takes to converge from blocking
state to forwarding state.
Max Age <= 2*(Forward Delay Time - 1)"
::= { stpBridgeInfo 2 }
stpBridgeMaxAge OBJECT-TYPE
SYNTAX Integer32 (6..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the time any switch should wait before trying to change the STP
topology after unhearing Hello BPUD.
Max Age <= 2*(Forward Delay Time - 1)
Max Age >= 2*(Hello Time + 1)"
::= { stpBridgeInfo 3 }
stpBridgeTxHoldCount OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the Transmit Hold Count used to limit BPDU transmission rate."
::= { stpBridgeInfo 4 }
stpBridgeHelloTime OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the interval between periodic transmissions of BPDU by
Designated Ports.
Max Age >= 2*(Hello Time + 1)"
::= { stpBridgeInfo 5 }
stpBridgeStatus OBJECT IDENTIFIER ::= { stp 7 }
bridgeIdentifier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "STP bridge identifier"
::= { stpBridgeStatus 1 }
definatedRootBridge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "STP destination root bridge ID"
::= { stpBridgeStatus 2 }
rootPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "STP root path cost"
::= { stpBridgeStatus 3 }
designatedBridge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "STP designated bridge"
::= { stpBridgeStatus 4 }
rootPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "STP root port"
::= { stpBridgeStatus 5 }
lastTopologyChange OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "STP last topology change"
::= { stpBridgeStatus 6 }
stpPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of STP port status"
::= { stp 8 }
stpPortStatusEntry OBJECT-TYPE
SYNTAX StpPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of STP port status"
INDEX { stpPortStatusIndex }
::= { stpPortStatusTable 1 }
StpPortStatusEntry ::= SEQUENCE {
stpPortStatusIndex Integer32,
stpPortPriority Integer32,
stpPortPathCost DisplayString,
stpPortDesignatedRootBridge DisplayString,
stpPortRootPathCost Integer32,
stpPortDesignatedBridge DisplayString,
stpPortEdgrPortConf DisplayString,
stpPortP2PMacConf DisplayString,
stpPortRoles INTEGER,
stpPortStatus INTEGER
}
stpPortStatusIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of STP port status"
::= { stpPortStatusEntry 1 }
stpPortPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Port Priority to the selected ports in the CIST instance.
Priority support the following value: 0, 16, 32, 48, 64, 80, 96,
112, 128, 144, 160, 176, 192, 208, 224, 240"
::= { stpPortStatusEntry 2 }
stpPortPathCost OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path Cost to the selected ports in the CIST instance.
(0 means `Auto`)"
::= { stpPortStatusEntry 3 }
stpPortDesignatedRootBridge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The designated root bridge"
::= { stpPortStatusEntry 4 }
stpPortRootPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The root path cost"
::= { stpPortStatusEntry 5 }
stpPortDesignatedBridge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The designated bridge"
::= { stpPortStatusEntry 6 }
stpPortEdgrPortConf OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The edge port configuration"
::= { stpPortStatusEntry 7 }
stpPortP2PMacConf OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The point-to-point MAC configuration"
::= { stpPortStatusEntry 8 }
stpPortRoles OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
master(1),
root(2),
designated(3),
alternate(4),
backup(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port roles"
::= { stpPortStatusEntry 9 }
stpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
discarding(1),
learning(2),
forwarding(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port status"
::= { stpPortStatusEntry 10 }
stpStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of STP statistic"
::= { stp 9 }
stpStatisticEntry OBJECT-TYPE
SYNTAX StpStatisticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of STP statistic"
INDEX { stpStatisticPortIndex }
::= { stpStatisticTable 1 }
StpStatisticEntry ::= SEQUENCE {
stpStatisticPortIndex Integer32,
configurationBPDUsReceived Integer32,
tcnBPDUsReceived Integer32,
configurationBPDUsTransmitted Integer32,
tcnBPDUsTransmitted Integer32
}
stpStatisticPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of STP statistic"
::= { stpStatisticEntry 1 }
configurationBPDUsReceived OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The configuration BPDU received"
::= { stpStatisticEntry 2 }
tcnBPDUsReceived OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The TCN BPDU received"
::= { stpStatisticEntry 3 }
configurationBPDUsTransmitted OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The configuration BPDU transmitted"
::= { stpStatisticEntry 4 }
tcnBPDUsTransmitted OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The TCN BPDU transmitted"
::= { stpStatisticEntry 5 }
-- l2switching.stp.mstp
mstp OBJECT IDENTIFIER ::= { stp 10 }
mstConfigIdentification OBJECT IDENTIFIER ::= { mstp 1 }
mstConfigName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The configuration name of MSTP"
::= { mstConfigIdentification 1 }
mstRevisionLevel OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The revision level of MSTP"
::= { mstConfigIdentification 2 }
mstInstanceID OBJECT IDENTIFIER ::= { mstp 2 }
mstiIDSetting OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The MSTI ID of MST instance ID"
::= { mstInstanceID 1 }
mstiVlanListSetting OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VLAN list of MST instance ID"
::= { mstInstanceID 2 }
mstiIDSettingMove OBJECT-TYPE
SYNTAX INTEGER {
nothing(1),
move(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The moving action of MST instance ID"
::= { mstInstanceID 3 }
mstiIDInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF MSTIIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of MST instance ID info"
::= { mstInstanceID 4 }
mstiIDInfoEntry OBJECT-TYPE
SYNTAX MSTIIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of MST instance ID info"
INDEX { mstiIDIndex }
::= { mstiIDInfoTable 1 }
MSTIIDEntry ::= SEQUENCE {
mstiIDIndex Integer32,
mstiVLANList DisplayString
}
mstiIDIndex OBJECT-TYPE
SYNTAX Integer32 (0 ..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MSTI ID of MST instance ID info"
::= { mstiIDInfoEntry 1 }
mstiVLANList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The VLAN List of MST instance ID info"
::= { mstiIDInfoEntry 2 }
stpInstance OBJECT IDENTIFIER ::= { mstp 3 }
stpPriorityInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF STPPriorityInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of STP priority info"
::= { stpInstance 1 }
stpPriorityInfoEntry OBJECT-TYPE
SYNTAX STPPriorityInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of STP priority info"
INDEX { stpMstiIDIndex }
::= { stpPriorityInfoTable 1 }
STPPriorityInfoEntry ::= SEQUENCE {
stpMstiIDIndex Integer32,
stpPriorityValue Integer32,
stpPriorityDefault INTEGER
}
stpMstiIDIndex OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MSTI ID of STP instance info"
::= { stpPriorityInfoEntry 1 }
stpPriorityValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The priority of STP instance info. Priority support the
following value: 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672,
32768, 36864, 40960, 45056, 49152, 53248, 57344, 61440"
::= { stpPriorityInfoEntry 2 }
stpPriorityDefault OBJECT-TYPE
SYNTAX INTEGER {
nothing(1),
default(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the priority to default value."
::= { stpPriorityInfoEntry 3 }
mstInstanceInfo OBJECT IDENTIFIER ::= { mstp 4 }
mstBridgeIdentifier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "STP bridge identifier in MST"
::= { mstInstanceInfo 1 }
mstDesignatedRootBridge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "STP destination root bridge ID in MST"
::= { mstInstanceInfo 2 }
mstRootPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "STP root path cost in MST"
::= { mstInstanceInfo 3 }
mstDesignatedBridge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "STP designated bridge in MST"
::= { mstInstanceInfo 4 }
mstRootPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "STP root port in MST"
::= { mstInstanceInfo 5 }
mstLastTopologyChange OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "STP last topology change in MST"
::= { mstInstanceInfo 6 }
mstStpPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF MSTStpPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of STP port status in MST"
::= { mstInstanceInfo 7 }
mstStpPortStatusEntry OBJECT-TYPE
SYNTAX MSTStpPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of STP port status in MST"
INDEX { mstStpPortStatusIndex }
::= { mstStpPortStatusTable 1 }
MSTStpPortStatusEntry ::= SEQUENCE {
mstStpPortStatusIndex Integer32,
mstStpPortPriority DisplayString,
mstStpPortPathCost DisplayString,
mstStpPortDesignatedRootBridge DisplayString,
mstStpPortRootPathCost DisplayString,
mstStpPortDesignatedBridge DisplayString,
mstStpPortEdgrPortConf DisplayString,
mstStpPortP2PMacConf DisplayString,
mstStpPortRoles DisplayString,
mstStpPortStatus DisplayString
}
mstStpPortStatusIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of STP port status in MST"
::= { mstStpPortStatusEntry 1 }
mstStpPortPriority OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The Port Priority to the selected ports in the CIST instance.
Priority support the following value: 0, 16, 32, 48, 64, 80, 96,
112, 128, 144, 160, 176, 192, 208, 224, 240"
::= { mstStpPortStatusEntry 2 }
mstStpPortPathCost OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Path Cost to the selected ports in the CIST instance.
(0 means `Auto`)"
::= { mstStpPortStatusEntry 3 }
mstStpPortDesignatedRootBridge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The designated root bridge"
::= { mstStpPortStatusEntry 4 }
mstStpPortRootPathCost OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The root path cost"
::= { mstStpPortStatusEntry 5 }
mstStpPortDesignatedBridge OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The designated bridge"
::= { mstStpPortStatusEntry 6 }
mstStpPortEdgrPortConf OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The edge port configuration"
::= { mstStpPortStatusEntry 7 }
mstStpPortP2PMacConf OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The point-to-point MAC configuration"
::= { mstStpPortStatusEntry 8 }
mstStpPortRoles OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port roles"
::= { mstStpPortStatusEntry 9 }
mstStpPortStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port status"
::= { mstStpPortStatusEntry 10 }
mstInstanceInfoID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "MST instance ID"
::= { mstInstanceInfo 8 }
-- l2switching.qinqVlan
outerVlanEthtype OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Q-in-Q outer VLAN ether type"
::= { qinqVlan 1 }
qinqPortInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF QinQPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of Q-in-Q port info"
::= { qinqVlan 2 }
qinqPortInfoEntry OBJECT-TYPE
SYNTAX QinQPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of Q-in-Q port info"
INDEX { qinqPortIndex }
::= { qinqPortInfoTable 1 }
QinQPortInfoEntry ::= SEQUENCE {
qinqPortIndex INTEGER,
qinqOuterPVID INTEGER,
qinqOuterMode INTEGER
}
qinqPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of Q-in-Q port info"
::= { qinqPortInfoEntry 1 }
qinqOuterPVID OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Q-in-Q outer PVID"
::= { qinqPortInfoEntry 2 }
qinqOuterMode OBJECT-TYPE
SYNTAX INTEGER {
nni(1),
uni(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Q-in-Q outer mode"
::= { qinqPortInfoEntry 3 }
-- l2switching.garp
garpJoinTime OBJECT-TYPE
SYNTAX INTEGER (1..600)
UNITS "Second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The GARP join time. Join time * 2 must be below leave time."
::= { garp 1 }
garpLeaveTime OBJECT-TYPE
SYNTAX INTEGER (2..3000)
UNITS "Second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The GARP leave time. The leave time must below leave all time and bigger then Join time * 2"
::= { garp 2 }
garpLeaveAllTime OBJECT-TYPE
SYNTAX INTEGER (2..12000)
UNITS "Second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The GARP leave all time. The leave all time must bigger then leave time."
::= { garp 3 }
-- l2switching.gvrp
gvrpStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of GVRP."
::= { gvrp 1 }
-- l2switching.xRingElite
xRingEliteState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of X-Ring Elite."
::= { xRingElite 1 }
xRingEliteRingIDTable OBJECT-TYPE
SYNTAX SEQUENCE OF XRingEliteRingIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of X-Ring Elite ring ID"
::= { xRingElite 2 }
xRingEliteRingIDEntry OBJECT-TYPE
SYNTAX XRingEliteRingIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of X-Ring Elite ring ID"
INDEX { xRingEliteRingIDIndex }
::= { xRingEliteRingIDTable 1 }
XRingEliteRingIDEntry ::= SEQUENCE{
xRingEliteRingIDIndex Integer32,
xRingEliteRingID Integer32,
xRingEliteRule INTEGER,
xRingElitePort1 Integer32,
xRingElitePort2 Integer32,
xRingEliteRingIDStatus DisplayString,
xRingElitePort1Status DisplayString,
xRingElitePort2Status DisplayString,
xRingEliteRowStatus INTEGER
}
xRingEliteRingIDIndex OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of X-Ring Elite ring ID"
::= { xRingEliteRingIDEntry 1 }
xRingEliteRingID OBJECT-TYPE
SYNTAX Integer32 (1 .. 255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ring ID of X-Ring Elite"
::= { xRingEliteRingIDEntry 2 }
xRingEliteRule OBJECT-TYPE
SYNTAX INTEGER {
basic(1),
couple(2),
tunnel(3),
mrm(4),
mrc(5),
legacy(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The rule of the X-Ring Elite"
::= { xRingEliteRingIDEntry 3 }
xRingElitePort1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port1 of this X-Ring Elite. For trunk port : Trunk1 is 1000,
Trunk2 is 1001, ..."
::= { xRingEliteRingIDEntry 4 }
xRingElitePort2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port2 of this X-Ring Elite. For trunk port : Trunk1 is 1000,
Trunk2 is 1001, ..."
::= { xRingEliteRingIDEntry 5 }
xRingEliteRingIDStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of this X-Ring Elite"
::= { xRingEliteRingIDEntry 6 }
xRingElitePort1Status OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port1 status of this X-Ring Elite"
::= { xRingEliteRingIDEntry 7 }
xRingElitePort2Status OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port2 status of this X-Ring Elite"
::= { xRingEliteRingIDEntry 8 }
xRingEliteRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2),
createAndWait(5),
destory(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry."
::= { xRingEliteRingIDEntry 99 }
--l2switching.loopback
loopbackEnabled OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of loopback detection."
::= { loopback 1 }
loopbackInterval OBJECT-TYPE
SYNTAX Integer32 (1..32767)
UNITS "Second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interval of loopback detection."
::= { loopback 2 }
loopbackRecoverTime OBJECT-TYPE
SYNTAX Integer32 (60..1000000)
UNITS "Second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The recover time of loopback detection."
::= { loopback 3 }
loopbackPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoopbackPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port table of loopback detection"
::= { loopback 4 }
loopbackPortEntry OBJECT-TYPE
SYNTAX LoopbackPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port entry of loopback detection"
INDEX { loopbackPortIndex }
::= { loopbackPortTable 1 }
LoopbackPortEntry ::= SEQUENCE {
loopbackPortIndex Integer32,
loopbackPortEnabled INTEGER,
loopbackPortLoopStatus INTEGER
}
loopbackPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of port loopback detection"
::= { loopbackPortEntry 1 }
loopbackPortEnabled OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The enabled status of port loopback detection"
::= { loopbackPortEntry 2 }
loopbackPortLoopStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
shutdown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The loop status of port loopback detection"
::= { loopbackPortEntry 3 }
-- l2switching.xRingPro
xRingProStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of X-Ring Pro"
::= { xRingPro 1 }
xRingProRingSetting OBJECT IDENTIFIER ::= { xRingPro 2 }
xRingProRingID OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ring ID of X-Ring Pro"
::= { xRingProRingSetting 1 }
xRingProRingPort1 OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port1 of X-Ring Pro. For trunk port : Trunk1 is 1000,
Trunk2 is 1001, ..."
::= { xRingProRingSetting 2 }
xRingProRingPort2 OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port2 of X-Ring Pro. For trunk port : Trunk1 is 1000,
Trunk2 is 1001, ..."
::= { xRingProRingSetting 3 }
xRingProRingAdd OBJECT-TYPE
SYNTAX INTEGER {
nothing(0),
add(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The add action of X-Ring Pro"
::= { xRingProRingSetting 4 }
xRingProCoupleSetting OBJECT IDENTIFIER ::= { xRingPro 3 }
xRingProCoupleID OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The couple ring ID of X-Ring Pro"
::= { xRingProCoupleSetting 1 }
xRingProCouplePort OBJECT-TYPE
SYNTAX BITS {
port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9),
port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19),
port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29),
port31(30), port32(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The couple port of X-Ring Pro"
::= { xRingProCoupleSetting 2 }
xRingProCoupleMasterRingID OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The master ring ID of X-Ring Pro"
::= { xRingProCoupleSetting 3 }
xRingProCoupleAdd OBJECT-TYPE
SYNTAX INTEGER {
nothing(0),
add(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The add action of X-Ring Pro"
::= { xRingProCoupleSetting 4 }
xRingProInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF XRingProInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of X-Ring Pro Infomation"
::= { xRingPro 4 }
xRingProInfoEntry OBJECT-TYPE
SYNTAX XRingProInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of X-Ring Pro Infomation"
INDEX { xRingProInfoRingID }
::= { xRingProInfoTable 1 }
XRingProInfoEntry ::= SEQUENCE {
xRingProInfoRingID Integer32,
xRingProInfoMode DisplayString,
xRingProInfoOperState DisplayString,
xRingProInfoPort1 DisplayString,
xRingProInfoPort1FwdState DisplayString,
xRingProInfoPort2 DisplayString,
xRingProInfoPort2FwdState DisplayString,
xRingProInfoDel INTEGER,
xRingProInfoRole INTEGER
}
xRingProInfoRingID OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ring ID of X-Ring Pro Infomation"
::= { xRingProInfoEntry 1 }
xRingProInfoMode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mode of X-Ring Pro Infomation"
::= { xRingProInfoEntry 2 }
xRingProInfoOperState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operation state of X-Ring Pro Infomation"
::= { xRingProInfoEntry 3 }
xRingProInfoPort1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port1 of X-Ring Pro Infomation."
::= { xRingProInfoEntry 4 }
xRingProInfoPort1FwdState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port1 forwarding state of X-Ring Pro Infomation"
::= { xRingProInfoEntry 5 }
xRingProInfoPort2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port2 of X-Ring Pro Infomation"
::= { xRingProInfoEntry 6 }
xRingProInfoPort2FwdState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port2 forwarding state of X-Ring Pro Infomation"
::= { xRingProInfoEntry 7 }
xRingProInfoDel OBJECT-TYPE
SYNTAX INTEGER {
nothing(0),
del(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The delete action of X-Ring Pro Infomation"
::= { xRingProInfoEntry 8 }
xRingProInfoRole OBJECT-TYPE
SYNTAX INTEGER {
member(0),
head(1),
tail(2),
none(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The role of X-Ring Pro Infomation"
::= { xRingProInfoEntry 9 }
xRingProPairSetting OBJECT IDENTIFIER ::= { xRingPro 5 }
xRingProPairID OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The pair ring ID of X-Ring Pro"
::= { xRingProPairSetting 1 }
xRingProPairPort OBJECT-TYPE
SYNTAX BITS {
port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9),
port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19),
port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29),
port31(30), port32(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The pair port of X-Ring Pro"
::= { xRingProPairSetting 2 }
xRingProPairMasterRingID OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The pair master ring ID of X-Ring Pro"
::= { xRingProPairSetting 3 }
xRingProPairAdd OBJECT-TYPE
SYNTAX INTEGER {
nothing(0),
add(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The add action of X-Ring Pro"
::= { xRingProPairSetting 4 }
xRingProRPairSetting OBJECT IDENTIFIER ::= { xRingPro 6 }
xRingProRPairID OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The R-pair ring ID of X-Ring Pro"
::= { xRingProRPairSetting 1 }
xRingProRPairPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The R-pair port of X-Ring Pro"
::= { xRingProRPairSetting 2 }
xRingProRPairMasterRingID OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The R-pair master ring ID of X-Ring Pro"
::= { xRingProRPairSetting 3 }
xRingProRPairAdd OBJECT-TYPE
SYNTAX INTEGER {
nothing(0),
add(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The add action of X-Ring Pro"
::= { xRingProRPairSetting 4 }
xRingProChainSetting OBJECT IDENTIFIER ::= { xRingPro 7 }
xRingProChainID OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The chain ring ID of X-Ring Pro"
::= { xRingProChainSetting 1 }
xRingProChainRole OBJECT-TYPE
SYNTAX INTEGER {
member(0),
head(1),
tail(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The role of X-Ring Pro."
::= { xRingProChainSetting 2 }
xRingProChainHeadPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The head port of X-Ring Pro. For trunk port : Trunk1 is 1000,
Trunk2 is 1001, ..."
::= { xRingProChainSetting 3 }
xRingProChainMemberPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The member port of X-Ring Pro. For trunk port : Trunk1 is 1000,
Trunk2 is 1001, ..."
::= { xRingProChainSetting 4 }
xRingProChainAdd OBJECT-TYPE
SYNTAX INTEGER {
nothing(0),
add(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The add action of X-Ring Pro"
::= { xRingProChainSetting 5 }
-- l2switching.gmrp
gmrpStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of GMRP."
::= { gmrp 1 }
gmrpMulticastGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF GMRPMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of GMRP multicast group"
::= { gmrp 2 }
gmrpMulticastGroupEntry OBJECT-TYPE
SYNTAX GMRPMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of GMRP multicast group"
INDEX { gmrpMulticastGroupVlanId }
::= { gmrpMulticastGroupTable 1 }
GMRPMulticastGroupEntry ::= SEQUENCE {
gmrpMulticastGroupIndex Integer32,
gmrpMulticastGroupVlanId Integer32,
gmrpMulticastGroupMacAddress DisplayString,
gmrpMulticastGroupType INTEGER,
gmrpMulticastGroupMemberPorts DisplayString
}
gmrpMulticastGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of GMRP multicast group"
::= { gmrpMulticastGroupEntry 1 }
gmrpMulticastGroupVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The vlan id of GMRP multicast group"
::= { gmrpMulticastGroupEntry 2 }
gmrpMulticastGroupMacAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MAC address of GMRP multicast group"
::= { gmrpMulticastGroupEntry 3 }
gmrpMulticastGroupType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
dynamic(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of GMRP multicast group"
::= { gmrpMulticastGroupEntry 4 }
gmrpMulticastGroupMemberPorts OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The member ports of GMRP multicast group"
::= { gmrpMulticastGroupEntry 5 }
-- l2switching.erps
erpsState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of ERPS"
::= { erps 1 }
erpsGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF ErpsGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of ERPS group."
::= { erps 2 }
erpsGroupEntry OBJECT-TYPE
SYNTAX ErpsGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of ERPS group."
INDEX { erpsGroupRingId }
::= { erpsGroupTable 1 }
ErpsGroupEntry ::= SEQUENCE {
erpsGroupRingIndex Integer32,
erpsGroupInstance Integer32,
erpsGroupRingId Integer32,
erpsGroupRole INTEGER,
erpsGroupState DisplayString,
erpsGroupEastLink Integer32,
erpsGroupEastLinkRPL INTEGER,
erpsGroupEastLinkState DisplayString,
erpsGroupWestLink Integer32,
erpsGroupWestLinkRPL INTEGER,
erpsGroupWestLinkState DisplayString,
erpsGroupMEL Integer32,
erpsGroupRAPSChannelVlan Integer32,
erpsGroupTrafficChannel Integer32,
erpsGroupRevertive INTEGER,
erpsGroupType INTEGER,
erpsGroupInterconnected INTEGER,
erpsGroupChannel INTEGER,
erpsGroupTcPropagation INTEGER,
erpsWTRTimer Integer32,
erpsGuardTimer Integer32,
erpsHoldOffTimer Integer32,
erpsGroupRowStatus INTEGER
}
erpsGroupRingIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of ERPS group."
::= { erpsGroupEntry 1 }
erpsGroupInstance OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The instance of ERPS group."
::= { erpsGroupEntry 2 }
erpsGroupRingId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ring ID of ERPS group."
::= { erpsGroupEntry 3 }
erpsGroupRole OBJECT-TYPE
SYNTAX INTEGER {
rplowner(0),
rplneighbor(1),
other(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The role of ERPS group"
::= { erpsGroupEntry 4 }
erpsGroupState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current state of ERPS group."
::= { erpsGroupEntry 5 }
erpsGroupEastLink OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The east link port of ERPS group. For trunk port : Trunk1 is 1000,
Trunk2 is 1001, ..."
::= { erpsGroupEntry 6 }
erpsGroupEastLinkRPL OBJECT-TYPE
SYNTAX INTEGER {
rpl(1),
n-rpl(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The rpl setting of ERPS group east link."
::= { erpsGroupEntry 7 }
erpsGroupEastLinkState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current state of ERPS group east link."
::= { erpsGroupEntry 8 }
erpsGroupWestLink OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The west link port of ERPS group. For trunk port : Trunk1 is 1000,
Trunk2 is 1001, ..."
::= { erpsGroupEntry 9 }
erpsGroupWestLinkRPL OBJECT-TYPE
SYNTAX INTEGER {
rpl(1),
n-rpl(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The rpl setting of ERPS group west link"
::= { erpsGroupEntry 10 }
erpsGroupWestLinkState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current state of ERPS group west link."
::= { erpsGroupEntry 11 }
erpsGroupMEL OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The MEL of ERPS group."
::= { erpsGroupEntry 12 }
erpsGroupRAPSChannelVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The r-aps channel vlan of ERPS group."
::= { erpsGroupEntry 13 }
erpsGroupTrafficChannel OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The traffic channel of ERPS group."
::= { erpsGroupEntry 14 }
erpsGroupRevertive OBJECT-TYPE
SYNTAX INTEGER {
revertive(1),
none-revertive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The revertive setting of ERPS group."
::= { erpsGroupEntry 15 }
erpsGroupType OBJECT-TYPE
SYNTAX INTEGER {
majorRing(1),
subRing(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ring type of ERPS group."
::= { erpsGroupEntry 16 }
erpsGroupInterconnected OBJECT-TYPE
SYNTAX INTEGER {
interconnected(1),
none-interconnected(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interconnected setting of ERPS group."
::= { erpsGroupEntry 17 }
erpsGroupChannel OBJECT-TYPE
SYNTAX INTEGER {
with-virtual-channel(1),
without-virtual-channel(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The virtual channel setting of ERPS group."
::= { erpsGroupEntry 18 }
erpsGroupTcPropagation OBJECT-TYPE
SYNTAX INTEGER {
tc-propagation(1),
none-tc-propagation(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The tc-propagation setting of ERPS group."
::= { erpsGroupEntry 19 }
erpsWTRTimer OBJECT-TYPE
SYNTAX Integer32 (1..12)
UNITS "Unit"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The WTR timer of ERPS group.(1 Unit = 1 minute) "
::= { erpsGroupEntry 20 }
erpsGuardTimer OBJECT-TYPE
SYNTAX Integer32 (1..200)
UNITS "Unit"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The guard timer of ERPS group.(1 Unit = 10 ms)"
::= { erpsGroupEntry 21 }
erpsHoldOffTimer OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "Unit"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The hold-off timer of ERPS group.(1 Unit = 100 ms)"
::= { erpsGroupEntry 22 }
erpsGroupRowStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry."
::= { erpsGroupEntry 99 }
-- mac address table
staticMacSetting OBJECT IDENTIFIER ::= { macAddressTable 1 }
dynamicMacSetting OBJECT IDENTIFIER ::= { macAddressTable 2 }
dynamicLearned OBJECT IDENTIFIER ::= { macAddressTable 3 }
-- macAddressTable.staticMacSettingTable
staticMacSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaticMacSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of static MAC setting"
::= { staticMacSetting 1 }
staticMacSettingEntry OBJECT-TYPE
SYNTAX StaticMacSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of static MAC setting"
INDEX { staticMacSettingIndex }
::= { staticMacSettingTable 1 }
StaticMacSettingEntry ::= SEQUENCE {
staticMacSettingIndex Integer32,
staticMacSettingMacAddress DisplayString,
staticMacSettingVlan Integer32,
staticMacSettingPort Integer32,
staticMacSettingRowStatus INTEGER
}
staticMacSettingIndex OBJECT-TYPE
SYNTAX Integer32 (1..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of static MAC setting"
::= { staticMacSettingEntry 1 }
staticMacSettingMacAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The MAC address to which packets will be statically forwardef.
It only supports unicast MAC address"
::= { staticMacSettingEntry 2 }
staticMacSettingVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the VLAN which the static MAC belongs to"
::= { staticMacSettingEntry 3 }
staticMacSettingPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the port number of the MAC entry. For trunk port : Trunk1 is 1000,
Trunk2 is 1001, ..."
::= { staticMacSettingEntry 4 }
staticMacSettingRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2),
createAndWait(5),
destory(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry."
::= { staticMacSettingEntry 99 }
-- macAddressTable.dynamicMacSetting
macAgingTime OBJECT-TYPE
SYNTAX Integer32 (10..630)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The dynamic MAC address aging out value"
::= { dynamicMacSetting 1 }
-- macAddressTable.dynamicLearned
clearMacAddressTable OBJECT-TYPE
SYNTAX INTEGER {
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear the MAC table"
::= { dynamicLearned 1 }
macAddressInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF MacAddressInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of MAC address info"
::= { dynamicLearned 2 }
macAddressInfoEntry OBJECT-TYPE
SYNTAX MacAddressInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of MAC address info"
INDEX { macAddressInfoIndex }
::= { macAddressInfoTable 1 }
MacAddressInfoEntry ::= SEQUENCE {
macAddressInfoIndex Integer32,
macAddressInfoMAC DisplayString,
macAddressInfoVlan Integer32,
macAddressInfoType INTEGER,
macAddressInfoPort DisplayString,
addtoStaticMacTable INTEGER
}
macAddressInfoIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of MAC address info"
::= { macAddressInfoEntry 1 }
macAddressInfoMAC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MAC address to show dynamic MAC entries."
::= { macAddressInfoEntry 2 }
macAddressInfoVlan OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The VLAN to show dynamic MAC entries."
::= { macAddressInfoEntry 3 }
macAddressInfoType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
dynamic(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of MAC address info"
::= { macAddressInfoEntry 4 }
macAddressInfoPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port of MAC address info"
::= { macAddressInfoEntry 5 }
addtoStaticMacTable OBJECT-TYPE
SYNTAX INTEGER {
nothing(0),
addtoStaticMac(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Add the entry from dynamic to static."
::= { macAddressInfoEntry 6 }
-- security
stormControl OBJECT IDENTIFIER ::= { security 1 }
protectedPort OBJECT IDENTIFIER ::= { security 2 }
dos OBJECT IDENTIFIER ::= { security 3 }
access OBJECT IDENTIFIER ::= { security 4 }
portSecurity OBJECT IDENTIFIER ::= { security 5 }
ipSecurity OBJECT IDENTIFIER ::= { security 6 }
ieee8021x OBJECT IDENTIFIER ::= { security 7 }
securityLogin OBJECT IDENTIFIER ::= { security 8 }
acl OBJECT IDENTIFIER ::= { security 9 }
ipSourceGuard OBJECT IDENTIFIER ::= { security 10 }
dhcpSnooping OBJECT IDENTIFIER ::= { security 11 }
arpSpoofing OBJECT IDENTIFIER ::= { security 12 }
-- security.stormControl
stromControlUnit OBJECT-TYPE
SYNTAX INTEGER {
pps(1),
bps(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The mode of stromg control.
pps: strom control rate calculates by packet-based
bps: strom control rate calculates by octet-based"
::= { stormControl 1 }
stromControlPreamble-IFG OBJECT-TYPE
SYNTAX INTEGER {
excluded(1),
included(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the rate calculates w/o preamble & IFG (20 bytes)
Excluded: exclude preamble & IFG (20 bytes) when count
ingress storm control rate.
Included: include preamble & IFG (20 bytes) when count
ingress storm control rate."
::= { stormControl 2 }
stromControlPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSecSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of port security setting"
::= { stormControl 3 }
stromControlPortEntry OBJECT-TYPE
SYNTAX PortSecSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of port security setting"
INDEX { stromControlPortIndex }
::= { stromControlPortTable 1 }
PortSecSettingEntry ::= SEQUENCE {
stromControlPortIndex Integer32,
stromControlPortState INTEGER,
stromControlPortAction INTEGER,
enablebroadcast INTEGER,
broadcastRate Integer32,
enableunknownMulticast INTEGER,
unknownMulticastRate Integer32,
enableunknownUnicast INTEGER,
unknownUnicastRate Integer32
}
stromControlPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of port security setting"
::= { stromControlPortEntry 1 }
stromControlPortState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the state of setting"
::= { stromControlPortEntry 2 }
stromControlPortAction OBJECT-TYPE
SYNTAX INTEGER {
drop(1),
shutdown(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the state of setting
Drop: Packets exceed storm control rate will be droped.
Shutdown: Port exceed storm control rate will be shutdown."
::= { stromControlPortEntry 3 }
enablebroadcast OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/diable the broadcast packet"
::= { stromControlPortEntry 4 }
broadcastRate OBJECT-TYPE
SYNTAX Integer32 (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value of storm control rate, Unit: pps (packet per-second) or Kbps
(Kbits per-second) depends on global mode setting.
The range is from 0 to 1000000."
::= { stromControlPortEntry 5 }
enableunknownMulticast OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/diable the unknown multicast packet"
::= { stromControlPortEntry 6 }
unknownMulticastRate OBJECT-TYPE
SYNTAX Integer32 (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value of storm control rate, Unit: pps (packet per-second) or Kbps
(Kbits per-second) depends on global mode setting.
The range is from 0 to 1000000."
::= { stromControlPortEntry 7 }
enableunknownUnicast OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/diable the unknown unicast packet"
::= { stromControlPortEntry 8 }
unknownUnicastRate OBJECT-TYPE
SYNTAX Integer32 (1..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value of storm control rate, Unit: pps (packet per-second) or Kbps
(Kbits per-second) depends on global mode setting.
The range is from 0 to 1000000."
::= { stromControlPortEntry 9 }
-- security.protectedPort
protectedPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF ProtectedPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of protected port"
::= { protectedPort 1 }
protectedPortEntry OBJECT-TYPE
SYNTAX ProtectedPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of protected port"
INDEX { protectedPortIndex }
::= { protectedPortTable 1 }
ProtectedPortEntry ::= SEQUENCE {
protectedPortIndex Integer32,
protectedPortType INTEGER
}
protectedPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of protected port"
::= { protectedPortEntry 1 }
protectedPortType OBJECT-TYPE
SYNTAX INTEGER {
unprotected(1),
porotected(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configure port protect type
Unprotected: Unprotected port can communicate
with all ports.
Protected: Prevent protected ports from
communication with each other."
::= { protectedPortEntry 2 }
-- security.dos
dmacEqualsmac OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both the source and the destination MAC addresses are the
same"
::= { dos 1 }
land OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both the source and the destination IPv4/IPv6 addresses are the
same"
::= { dos 2 }
udpBlat OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both the source and the destination UDP port are the same"
::= { dos 3 }
tcpBlat OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Both the source and the destination TCP port are the same"
::= { dos 4 }
pod OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Ping packets that length are larger than 65535 bytes"
::= { dos 5 }
ipv6MinFragment OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IPv6 fragmented packets (not including the last one) that
payload length less than 1240 bytes, and the Min length can
be configured if needed."
::= { dos 6 }
ipv6MinFragmentValue OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IPv6 fragmented packets (not including the last one) that
payload length less than 1240 bytes, and the Min length can
be configured if needed."
::= { dos 7}
icmpFragment OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Fragmented ICMP packets."
::= { dos 8 }
ipv4PingMaxSize OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IPv4 PING packet with the length"
::= { dos 9 }
ipv6PingMaxSize OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IPv6 PING packet with the length"
::= { dos 10 }
pingMaxSizeSetting OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Ping packet Max Size Setting. The default value is 512
Bytes, it can be configured if needed."
::= { dos 11 }
smurfAttack OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "ICMP echo request packet that destination IPv4 address is
broadcast address."
::= { dos 12 }
smurfAttackValue OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The default Netmask length is 0, and it can be configured if
needed."
::= { dos 13 }
tcpMinHdrSize OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TCP packet that header length is less than the configured
value."
::= { dos 14 }
tcpMinHdrSizeValue OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The default TCP Min Hdr Size is 20, it can be configured if
needed."
::= { dos 15 }
tcp-Syn OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TCP SYN packets with source port less than 1024."
::= { dos 16 }
nullScanAttack OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TCP sequence number is zero, and all control flags are
zeroes."
::= { dos 17 }
xMasScanAttack OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TCP sequence number is zero, and the FIN/URG/PSH flags
are set."
::= { dos 18 }
tcpSYN-FINAttack OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A TCP packet with the SYN and FIN flags set."
::= { dos 19 }
tcpSYN-RSTAttack OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A TCP packet with the SYN and RST flags set."
::= { dos 20 }
tcpFragment OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Fragmented TCP packets."
::= { dos 21 }
dosPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF DosPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of DoS port"
::= { dos 22 }
dosPortEntry OBJECT-TYPE
SYNTAX DosPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of DoS port"
INDEX { dosportIndex }
::= { dosPortTable 1 }
DosPortEntry ::= SEQUENCE {
dosportIndex Integer32,
dosProtection INTEGER
}
dosportIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of DoS port"
::= { dosPortEntry 1 }
dosProtection OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configure port protect state"
::= { dosPortEntry 2 }
-- security.access
telnetInfo OBJECT IDENTIFIER ::= { access 1 }
telnetService OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/disable the tlent service"
::= { telnetInfo 1 }
currentTelnetSessionCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current telnet session counter"
::= { telnetInfo 2 }
httpSetting OBJECT IDENTIFIER ::= { access 2 }
httpService OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/disable the http service"
::= { httpSetting 1 }
httpSessionTimeout OBJECT-TYPE
SYNTAX Integer32 (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the HTTP session timeout"
::= { httpSetting 2 }
httpsSetting OBJECT IDENTIFIER ::= { access 3 }
httpsService OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/disable the https service"
::= { httpsSetting 1 }
httpsSessionTimeout OBJECT-TYPE
SYNTAX Integer32 (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the HTTPs session timeout"
::= { httpsSetting 2 }
sshInfo OBJECT IDENTIFIER ::= { access 4 }
sshService OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/disable the ssh service"
::= { sshInfo 1 }
-- security.portSecurity
portSecurityTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSecurityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of port security"
::= { portSecurity 1 }
portSecurityEntry OBJECT-TYPE
SYNTAX PortSecurityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of port security"
INDEX { portSecurityPortIndex }
::= { portSecurityTable 1 }
PortSecurityEntry ::= SEQUENCE {
portSecurityPortIndex Integer32,
portSecurityEnabled INTEGER,
portSecurityFDBLimit Integer32,
portSecurityViolationMACNotify INTEGER
}
portSecurityPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of port security"
::= { portSecurityEntry 1 }
portSecurityEnabled OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable port security"
::= { portSecurityEntry 2 }
portSecurityFDBLimit OBJECT-TYPE
SYNTAX Integer32 (0..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The number of FDB learning."
::= { portSecurityEntry 3 }
portSecurityViolationMACNotify OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable Violation MAC Notification"
::= { portSecurityEntry 4 }
--security.ipSecurity
ipSecurityStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable IP security"
::= { ipSecurity 1 }
ipSecurityTable OBJECT-TYPE
SYNTAX SEQUENCE OF IPSecurityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of IP security"
::= { ipSecurity 2 }
ipSecurityEntry OBJECT-TYPE
SYNTAX IPSecurityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of IP security"
INDEX { ipSecurityIndex }
::= { ipSecurityTable 1 }
IPSecurityEntry ::= SEQUENCE {
ipSecurityIndex Integer32,
ipSecurityIPAddr IpAddress,
ipSecurityIPMask IpAddress,
ipSecurityService BITS,
ipSecurityVlanId Integer32,
ipSecurityRowStatus INTEGER
}
ipSecurityIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of IP security"
::= { ipSecurityEntry 1 }
ipSecurityIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of IP security"
::= { ipSecurityEntry 2 }
ipSecurityIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP mask of IP security"
::= { ipSecurityEntry 3 }
ipSecurityService OBJECT-TYPE
SYNTAX BITS {
ping(0),
http(1),
telnet(2),
ssh(3),
snmp(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The service of IP security"
::= { ipSecurityEntry 4 }
ipSecurityVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VLAN id of IP security. This value will appear on multiple interface."
::= { ipSecurityEntry 5 }
ipSecurityRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2),
createAndWait(5),
destory(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "User can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry."
::= { ipSecurityEntry 99 }
--security.ieee8021x
ieee8021xState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable IEEE 802.1x "
::= { ieee8021x 1 }
ieee8021xServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The server IP address of IEEE 802.1x"
::= { ieee8021x 2 }
ieee8021xServerPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The server port of IEEE 802.1x"
::= { ieee8021x 3 }
ieee8021xAccountingPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The accounting port of IEEE 802.1x"
::= { ieee8021x 4 }
ieee8021xSecurityKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The security key of IEEE 802.1x"
::= { ieee8021x 5 }
ieee8021xReauthPeriod OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The reauth period of IEEE 802.1x"
::= { ieee8021x 6 }
ieee8021xPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IEEE8021xPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of IEEE 802.1x"
::= { ieee8021x 7 }
ieee8021xPortEntry OBJECT-TYPE
SYNTAX IEEE8021xPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of IEEE 802.1x"
INDEX { ieee8021xPortIndex }
::= { ieee8021xPortTable 1 }
IEEE8021xPortEntry ::= SEQUENCE {
ieee8021xPortIndex Integer32,
ieee8021xPortState INTEGER
}
ieee8021xPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of IEEE 802.1x"
::= { ieee8021xPortEntry 1 }
ieee8021xPortState OBJECT-TYPE
SYNTAX INTEGER {
authorize(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port state of IEEE 802.1x"
::= { ieee8021xPortEntry 2 }
ieee8021xAuthBased OBJECT-TYPE
SYNTAX INTEGER {
port(1),
mac(2),
mac-auth-bypass(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The authentication based of IEEE 802.1x "
::= { ieee8021x 8}
--security.securityLogin
securityLoginState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable security login."
::= { securityLogin 1 }
radiusServer OBJECT IDENTIFIER ::= { securityLogin 2 }
radiusServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Radius server IP."
::= { radiusServer 1 }
radiusServerPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Radius server port."
::= { radiusServer 2 }
radiusServerSecurityKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The security key of radius server."
::= { radiusServer 3 }
tacacsServer OBJECT IDENTIFIER ::= { securityLogin 3 }
tacacsServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TACACS server IP."
::= { tacacsServer 1 }
tacacsServerPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TACACS server port."
::= { tacacsServer 2 }
tacacsServerSecurityKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The security key of TACACS server."
::= { tacacsServer 3 }
securityLoginType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
radius(1),
tacacs(2),
radiusAndtacacs(3),
radiusAndtacacsAndweb(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable security login."
::= { securityLogin 4 }
securityLoginHttpState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable HTTP type of security login."
::= { securityLogin 5 }
securityLoginTelnetState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable telnet type of security login."
::= { securityLogin 6 }
securityLoginSSHState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable SSH type of security login."
::= { securityLogin 7 }
--security.acl OBJECT IDENTIFIER ::= { security 9 }
macAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF MacAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of mac acl"
::= { acl 1 }
macAclEntry OBJECT-TYPE
SYNTAX MacAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of mac acl"
INDEX { macAclIndex }
::= { macAclTable 1 }
MacAclEntry ::= SEQUENCE {
macAclIndex Integer32,
destinationMacAddress DisplayString,
destinationMacMask DisplayString,
sourceMacAddress DisplayString,
sourceMacMask DisplayString,
macAclEtherType Integer32,
macAclVlanID Integer32,
macAclPortList BITS,
macAclAction INTEGER,
macAclActiveStatus INTEGER,
macAclRowStatus INTEGER
}
macAclIndex OBJECT-TYPE
SYNTAX Integer32 (1..250)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The index of mac ACL entry"
::= { macAclEntry 1 }
destinationMacAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The destination MAC address of mac ACL entry."
::= { macAclEntry 2 }
destinationMacMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The destination MAC mask of mac ACL entry."
::= { macAclEntry 3 }
sourceMacAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The source MAC address of mac ACL entry."
::= { macAclEntry 4 }
sourceMacMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The source MAC mask of mac ACL entry."
::= { macAclEntry 5 }
macAclEtherType OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ether type of mac ACL entry"
::= { macAclEntry 6 }
macAclVlanID OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The vlan id of mac ACL entry"
::= { macAclEntry 7 }
macAclPortList OBJECT-TYPE
SYNTAX BITS {
port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9),
port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19),
port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29),
port31(30), port32(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port list of mac ACL entry."
::= { macAclEntry 8 }
macAclAction OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
drop(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The action of mac ACL entry."
::= { macAclEntry 9 }
macAclActiveStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The active status of mac ACL entry."
::= { macAclEntry 10 }
macAclRowStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry."
::= { macAclEntry 99 }
ipAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of ip acl"
::= { acl 2 }
ipAclEntry OBJECT-TYPE
SYNTAX IpAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of ip acl"
INDEX { ipAclIndex }
::= { ipAclTable 1 }
IpAclEntry ::= SEQUENCE {
ipAclIndex Integer32,
destinationIpAddress IpAddress,
destinationIpMask IpAddress,
sourceIpAddress IpAddress,
sourceIpMask IpAddress,
ipProtocol INTEGER,
l4DestinationPort Integer32,
l4SourcePort Integer32,
ipAclPortList BITS,
ipAclAction INTEGER,
ipAclActiveStatus INTEGER,
ipAclRowStatus INTEGER
}
ipAclIndex OBJECT-TYPE
SYNTAX Integer32 (1..250)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The index of ip ACL entry"
::= { ipAclEntry 1 }
destinationIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The destination ip address of ip ACL entry."
::= { ipAclEntry 2 }
destinationIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The destination ip mask of ip ACL entry."
::= { ipAclEntry 3 }
sourceIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The source ip address of ip ACL entry."
::= { ipAclEntry 4 }
sourceIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The source ip mask of ip ACL entry."
::= { ipAclEntry 5 }
ipProtocol OBJECT-TYPE
SYNTAX INTEGER {
none(1),
icmp(2),
tcp(3),
udp(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ip protocol of ip ACL entry."
::= { ipAclEntry 6 }
l4DestinationPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The L4 destination port of ip ACL entry"
::= { ipAclEntry 7 }
l4SourcePort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The L4 source port of ip ACL entry"
::= { ipAclEntry 8 }
ipAclPortList OBJECT-TYPE
SYNTAX BITS {
port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9),
port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19),
port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29),
port31(30), port32(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port list of ip ACL entry."
::= { ipAclEntry 9 }
ipAclAction OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
drop(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The action of ip ACL entry."
::= { ipAclEntry 10 }
ipAclActiveStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The active status of ip ACL entry."
::= { ipAclEntry 11 }
ipAclRowStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry."
::= { ipAclEntry 99 }
--security.ipSourceGuard OBJECT IDENTIFIER ::= { security 10 }
ipSourceGuardEnablePorts OBJECT-TYPE
SYNTAX BITS {
port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9),
port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19),
port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29),
port31(30), port32(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The enable port list for ip source guard."
::= { ipSourceGuard 1 }
ipSourceGuardTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSourceGuardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of ip source guard"
::= { ipSourceGuard 2 }
ipSourceGuardEntry OBJECT-TYPE
SYNTAX IpSourceGuardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of ip source guard"
INDEX { ipSourceGuardIndex }
::= { ipSourceGuardTable 1 }
IpSourceGuardEntry ::= SEQUENCE {
ipSourceGuardIndex Integer32,
ipSourceGuardSourceIp IpAddress,
ipSourceGuardSourceMac DisplayString,
ipSourceGuardPort Integer32,
ipSourceGuardRowStatus INTEGER
}
ipSourceGuardIndex OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of ip source guard entry"
::= { ipSourceGuardEntry 1 }
ipSourceGuardSourceIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The destination ip address of ip source guard entry."
::= { ipSourceGuardEntry 2 }
ipSourceGuardSourceMac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The destination MAC address of ip source guard entry."
::= { ipSourceGuardEntry 3 }
ipSourceGuardPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port of ip source guard entry"
::= { ipSourceGuardEntry 4 }
ipSourceGuardRowStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry."
::= { ipSourceGuardEntry 5 }
--security.dhcpSnooping OBJECT IDENTIFIER ::= { security 11 }
dhcpSnoopingState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable DHCP snooping."
::= { dhcpSnooping 1 }
dhcpSnoopingPorts OBJECT-TYPE
SYNTAX BITS {
port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9),
port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19),
port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29),
port31(30), port32(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The enable port list for dhcp snooping."
::= { dhcpSnooping 2 }
dhcpSnoopingBindingPorts OBJECT-TYPE
SYNTAX BITS {
port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9),
port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19),
port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29),
port31(30), port32(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The enable blinding port list for dhcp snooping."
::= { dhcpSnooping 3 }
dhcpSnoopingTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of dhcp snooping"
::= { dhcpSnooping 4 }
dhcpSnoopingEntry OBJECT-TYPE
SYNTAX DhcpSnoopingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of dhcp snooping"
INDEX { dhcpSnoopingIndex }
::= { dhcpSnoopingTable 1 }
DhcpSnoopingEntry ::= SEQUENCE {
dhcpSnoopingIndex Integer32,
dhcpSnoopingMac DisplayString,
dhcpSnoopingIp IpAddress,
dhcpSnoopingLeaseTime INTEGER,
dhcpSnoopingVlanId Integer32,
dhcpSnoopingPort Integer32
}
dhcpSnoopingIndex OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of dhcp snooping entry"
::= { dhcpSnoopingEntry 1 }
dhcpSnoopingMac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The destination MAC address of dhcp snooping entry."
::= { dhcpSnoopingEntry 2 }
dhcpSnoopingIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The destination ip address of dhcp snooping entry."
::= { dhcpSnoopingEntry 3 }
dhcpSnoopingLeaseTime OBJECT-TYPE
SYNTAX INTEGER (60..864000)
UNITS "second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The lease time of dhcp snooping entry"
::= { dhcpSnoopingEntry 4 }
dhcpSnoopingVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The VLAN ID of dhcp snooping entry"
::= { dhcpSnoopingEntry 5 }
dhcpSnoopingPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port of dhcp snooping entry"
::= { dhcpSnoopingEntry 6 }
--security.arpSpoofing OBJECT IDENTIFIER ::= { security 12 }
arpSpoofingTable OBJECT-TYPE
SYNTAX SEQUENCE OF ArpSpoofingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of arp spoofing"
::= { arpSpoofing 1 }
arpSpoofingEntry OBJECT-TYPE
SYNTAX ArpSpoofingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of arp spoofing"
INDEX { arpSpoofingIndex }
::= { arpSpoofingTable 1 }
ArpSpoofingEntry ::= SEQUENCE {
arpSpoofingIndex Integer32,
arpSpoofingSourceMac DisplayString,
arpSpoofingSourceIp IpAddress,
arpSpoofingRowStatus INTEGER
}
arpSpoofingIndex OBJECT-TYPE
SYNTAX Integer32 (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of arp spoofing entry"
::= { arpSpoofingEntry 1 }
arpSpoofingSourceMac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The source MAC address of arp spoofing entry."
::= { arpSpoofingEntry 2 }
arpSpoofingSourceIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The source ip address of arp spoofing entry."
::= { arpSpoofingEntry 3 }
arpSpoofingRowStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry."
::= { arpSpoofingEntry 4 }
-- qos
general OBJECT IDENTIFIER ::= { qos 1 }
qosBasicMode OBJECT IDENTIFIER ::= { qos 2 }
rateLimit OBJECT IDENTIFIER ::= { qos 3 }
-- qos.general
qosMode OBJECT-TYPE
SYNTAX INTEGER {
basic(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The QoS operaion mode"
::= { general 1 }
qosPortSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosPortSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of QoS port setting"
::= { general 2 }
qosPortSettingEntry OBJECT-TYPE
SYNTAX QosPortSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of QoS port setting"
INDEX { qosPortIndex }
::= { qosPortSettingTable 1 }
QosPortSettingEntry ::= SEQUENCE {
qosPortIndex Integer32,
qosPortCos Integer32,
qosPortRemarkCoS INTEGER,
qosPortRemarkDSCP INTEGER,
qosPortRemarkIPPrecedence INTEGER
}
qosPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of QoS port setting"
::= { qosPortSettingEntry 1 }
qosPortCos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The default CoS/802.1p priority value"
::= { qosPortSettingEntry 2 }
qosPortRemarkCoS OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/disable CoS remark"
::= { qosPortSettingEntry 3 }
qosPortRemarkDSCP OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/disable DSCP remark"
::= { qosPortSettingEntry 4 }
qosPortRemarkIPPrecedence OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable IP Precedence remark"
::= { qosPortSettingEntry 5 }
queueSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF QueueSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of queue setting"
::= { general 3 }
queueSettingEntry OBJECT-TYPE
SYNTAX QueueSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "the entry of queue setting"
INDEX { queueIndex }
::= { queueSettingTable 1 }
QueueSettingEntry ::= SEQUENCE {
queueIndex Integer32,
queueMethod INTEGER,
queueWeight Integer32,
queuePercentOfWRRBandwidth DisplayString
}
queueIndex OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of queue setting"
::= { queueSettingEntry 1 }
queueMethod OBJECT-TYPE
SYNTAX INTEGER {
strictPriority(1),
wrr(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "queue to strict priority type or Weight round robin type"
::= { queueSettingEntry 2 }
queueWeight OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If the queue type is WRR, set the queue weight for the
queue."
::= { queueSettingEntry 3 }
queuePercentOfWRRBandwidth OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The percentage of the WRR bandwidth"
::= { queueSettingEntry 4 }
costoQueueMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF CostoQueueMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of CoS to queue"
::= { general 4 }
costoQueueMapEntry OBJECT-TYPE
SYNTAX CostoQueueMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of CoS to queue"
INDEX { cosIndex }
::= { costoQueueMapTable 1 }
CostoQueueMapEntry ::= SEQUENCE {
cosIndex Integer32,
cosQueue Integer32
}
cosIndex OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of CoS to queue"
::= { costoQueueMapEntry 1 }
cosQueue OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The queue of CoS to queue"
::= { costoQueueMapEntry 2 }
queuetoCosMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF QueueToCosMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of queue to CoS"
::= { general 5 }
queuetoCosMapEntry OBJECT-TYPE
SYNTAX QueueToCosMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of queue to CoS"
INDEX { queuetoCosIndex }
::= { queuetoCosMapTable 1 }
QueueToCosMapEntry ::= SEQUENCE {
queuetoCosIndex Integer32,
queueCos Integer32
}
queuetoCosIndex OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The queue index of queue to CoS"
::= { queuetoCosMapEntry 1 }
queueCos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The cos of queue to CoS"
::= { queuetoCosMapEntry 2 }
dscptoQueueMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF DscptoQueueMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of DSCP to queue"
::= { general 6 }
dscptoQueueMapEntry OBJECT-TYPE
SYNTAX DscptoQueueMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of DSCP to queue"
INDEX { dscpIndex }
::= { dscptoQueueMapTable 1 }
DscptoQueueMapEntry ::= SEQUENCE {
dscpIndex Integer32,
dscpQueue Integer32
}
dscpIndex OBJECT-TYPE
SYNTAX Integer32 (0..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSCP index of DSCP to queue"
::= { dscptoQueueMapEntry 1 }
dscpQueue OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The queue of DSCP to queue"
::= { dscptoQueueMapEntry 2 }
queuetoDSCPMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF QueuetoDSCPMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of queue to DSCP"
::= { general 7 }
queuetoDSCPMapEntry OBJECT-TYPE
SYNTAX QueuetoDSCPMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of queue to DSCP"
INDEX { queuetoDSCPIndex }
::= { queuetoDSCPMapTable 1 }
QueuetoDSCPMapEntry ::= SEQUENCE {
queuetoDSCPIndex Integer32,
queuDscp Integer32
}
queuetoDSCPIndex OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The queue index of queue to DSCP"
::= { queuetoDSCPMapEntry 1 }
queuDscp OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DSCP of queue to DSCP"
::= { queuetoDSCPMapEntry 2 }
ipPrecedencetoQueueMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpPrecedencetoQueueMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of IP precedence to queue"
::= { general 8 }
ipPrecedencetoQueueMapEntry OBJECT-TYPE
SYNTAX IpPrecedencetoQueueMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of IP precedence to queue"
INDEX { ipPrecedenceIndex }
::= { ipPrecedencetoQueueMapTable 1 }
IpPrecedencetoQueueMapEntry ::= SEQUENCE {
ipPrecedenceIndex Integer32,
ipPrecedenceQueue Integer32
}
ipPrecedenceIndex OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of IP precedence to queue"
::= { ipPrecedencetoQueueMapEntry 1 }
ipPrecedenceQueue OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The queue of IP precedence to queue"
::= { ipPrecedencetoQueueMapEntry 2 }
queueToipPrecedenceMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF QueueToipPrecedenceMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of queue to IP precedence"
::= { general 9 }
queueToipPrecedenceMapEntry OBJECT-TYPE
SYNTAX QueueToipPrecedenceMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of queue to IP precedence"
INDEX { queueToipPrecedenceIndex }
::= { queueToipPrecedenceMapTable 1 }
QueueToipPrecedenceMapEntry ::= SEQUENCE {
queueToipPrecedenceIndex Integer32,
ipPrecedence Integer32
}
queueToipPrecedenceIndex OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of queue to IP precedence"
::= { queueToipPrecedenceMapEntry 1 }
ipPrecedence OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP precedence of queue to IP precedence"
::= { queueToipPrecedenceMapEntry 2 }
-- qos.qosBasicMode
trustMode OBJECT-TYPE
SYNTAX INTEGER {
cos-8021p(1),
dscp(2),
cos8021p-dscp(3),
ip-precendence(4),
none(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the QoS operation mode.
CoS/802.1p: Traffic is mapped to queues based on
the CoS field in the VLAN tag, or based on the per-port
default CoS value if there is no VLAN tag on the
incoming packet.
DSCP: All IP traffic is mapped to queues based on the
DSCP field in the IP header. If traffic is not IP traffic, it
is mapped to the lowest priority queue.
CoS/802.1p-DSCP: All IP traffic is mapped to
queues based on the DSCP field in the IP header. If
traffic is not IP but has VLAN tag, mapped to queues
based on the CoS value in the VLAN tag.
IP Precedence: All IP traffic is mapped to queues
based on the IP Precedence field in the IP header. If
traffic is not IP traffic, it is mapped to the lowest
priority queue.
None: All traffic is mapped to the lowest priority
queue."
::= { qosBasicMode 1 }
qosBasicPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of QoS port"
::= { qosBasicMode 2 }
qosBasicPortEntry OBJECT-TYPE
SYNTAX QosPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of QoS port"
INDEX { qosBasicPortIndex }
::= { qosBasicPortTable 1 }
QosPortEntry ::= SEQUENCE {
qosBasicPortIndex Integer32,
qosBasicPortTrust INTEGER
}
qosBasicPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of QoS port"
::= { qosBasicPortEntry 1 }
qosBasicPortTrust OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the port trust state
Enabled: Traffic from this port will follow the global
trust type.
Disabled: Traffic will always go to the lowest priority
queue."
::= { qosBasicPortEntry 2 }
-- qos.rateLimit
ingressBandwidthControl OBJECT IDENTIFIER ::= { rateLimit 1 }
ingressBandwidthTable OBJECT-TYPE
SYNTAX SEQUENCE OF IngressBandwidthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of ingress bandwidth"
::= { ingressBandwidthControl 1 }
ingressBandwidthEntry OBJECT-TYPE
SYNTAX IngressBandwidthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of ingress bandwidth"
INDEX { ingressBandwidthPortIndex }
::= { ingressBandwidthTable 1 }
IngressBandwidthEntry ::= SEQUENCE {
ingressBandwidthPortIndex Integer32,
ingressBandwidthState INTEGER,
ingressBandwidthRate Integer32
}
ingressBandwidthPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of ingress bandwidth"
::= { ingressBandwidthEntry 1 }
ingressBandwidthState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/disable ingress bandwidth control"
::= { ingressBandwidthEntry 2 }
ingressBandwidthRate OBJECT-TYPE
SYNTAX Integer32 (16..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "rate value, unit:16Kbps"
::= { ingressBandwidthEntry 3 }
egressBandwidthControl OBJECT IDENTIFIER ::= { rateLimit 2 }
egressBandwidthTable OBJECT-TYPE
SYNTAX SEQUENCE OF EgressBandwidthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of egress bandwidth"
::= { egressBandwidthControl 1 }
egressBandwidthEntry OBJECT-TYPE
SYNTAX EgressBandwidthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of egress bandwidth"
INDEX { egressBandwidthPortIndex }
::= { egressBandwidthTable 1 }
EgressBandwidthEntry ::= SEQUENCE {
egressBandwidthPortIndex Integer32,
egressBandwidthState INTEGER,
egressBandwidthRate Integer32
}
egressBandwidthPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of egress bandwidth"
::= { egressBandwidthEntry 1 }
egressBandwidthState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/disable egress bandwidth control"
::= { egressBandwidthEntry 2 }
egressBandwidthRate OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "rate value, unit:16Kbps"
::= { egressBandwidthEntry 3 }
egressQueueBandwidthControl OBJECT IDENTIFIER ::= { rateLimit 3 }
egressqueueBandwidthTable OBJECT-TYPE
SYNTAX SEQUENCE OF EgressqueueBandwidthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of egress queue bandwidth"
::= { egressQueueBandwidthControl 1 }
egressqueueBandwidthEntry OBJECT-TYPE
SYNTAX EgressqueueBandwidthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of egress queue bandwidth"
INDEX { egressqueueBandwidthPortIndex }
::= { egressqueueBandwidthTable 1 }
EgressqueueBandwidthEntry ::= SEQUENCE {
egressqueueBandwidthPortIndex Integer32,
egressqueueBandwidthQueueIndex Integer32,
egressqueueBandwidthState INTEGER,
egressqueueBandwidthCir Integer32
}
egressqueueBandwidthPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of egress queue bandwidth"
::= { egressqueueBandwidthEntry 1 }
egressqueueBandwidthQueueIndex OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The queue index of egress queue bandwidth"
::= { egressqueueBandwidthEntry 2 }
egressqueueBandwidthState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/disable egress bandwidth contro"
::= { egressqueueBandwidthEntry 3 }
egressqueueBandwidthCir OBJECT-TYPE
SYNTAX Integer32 (16..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "rate value, unit:16Kbps"
::= { egressqueueBandwidthEntry 4 }
-- management
lldp OBJECT IDENTIFIER ::= { management 1 }
snmp OBJECT IDENTIFIER ::= { management 2 }
poe OBJECT IDENTIFIER ::= { management 3 }
tcpModbus OBJECT IDENTIFIER ::= { management 4 }
dhcpServer OBJECT IDENTIFIER ::= { management 5 }
smtpClient OBJECT IDENTIFIER ::= { management 6 }
rmon OBJECT IDENTIFIER ::= { management 7 }
ntp OBJECT IDENTIFIER ::= { management 8 }
-- management.lldp
lldpEnabled OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable LLDP protocol on this switch"
::= { lldp 1 }
lldpPduDisableAction OBJECT-TYPE
SYNTAX INTEGER {
filtering(1),
bridging(2),
flooding(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select LLDP PDU handling action to be filtered, bridging or
flooded when LLDP is globally disabled."
::= { lldp 2 }
lldpTransmissionInterval OBJECT-TYPE
SYNTAX Integer32 (5..32767)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interval at which frames are transmitted. LLDP transmission
interval multiplies holdtme multiplier should be smaller than 65535.
LLDP transmission delay should not be larger than LLDP transmission
interval * 0.25"
::= { lldp 3 }
lldpHoldtimeMultiplier OBJECT-TYPE
SYNTAX Integer32 (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The multiplier on the transmit interval to assign to TTL. LLDP
transmission interval multiplies holdtme multiplier should be
smaller than 65535."
::= { lldp 4 }
lldpReinitializationDelay OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The delay before a re-initialization"
::= { lldp 5 }
lldpTransmitDelay OBJECT-TYPE
SYNTAX Integer32 (1..8191)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The delay after an LLDP frame is sent. LLDP transmission delay
should not be larger than LLDP transmission interval * 0.25"
::= { lldp 6 }
lldpPortConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpPortConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of LLDP port configuration"
::= { lldp 7 }
lldpPortConfEntry OBJECT-TYPE
SYNTAX LldpPortConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of LLDP port configuration"
INDEX { lldpPortIndex }
::= { lldpPortConfTable 1 }
LldpPortConfEntry ::= SEQUENCE {
lldpPortIndex Integer32,
lldpPortState INTEGER,
lldpPortOptionalTLVs BITS,
lldpPortVlans DisplayString
}
lldpPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of LLDP port configuration"
::= { lldpPortConfEntry 1 }
lldpPortState OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
rx-only(2),
tx-only(3),
rx-tx(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the transmission state of LLDP port interface.
Disable: Disable the transmission of LLDP PDUs.
RX Only: Receive LLDP PDUs only.
TX Only: Transmit LLDP PDUs only.
TX And RX: Transmit and receive LLDP PDUs both."
::= { lldpPortConfEntry 2 }
lldpPortOptionalTLVs OBJECT-TYPE
SYNTAX BITS {
systemName(0),
portDescription(1),
systemDescription(2),
systemCapability(3),
ieee8023MAC-PHY(4),
ieee8023LinkAggeration(5),
ieee8023MaxFrameSize(6),
managementAddress(7),
ieee8021PVID(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The LLDP optional TLVs to be carried"
::= { lldpPortConfEntry 3 }
lldpPortVlans OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VLAN name ID to be carried. User can inpu vlan such as:
1-2, 100."
::= { lldpPortConfEntry 4 }
localDevice OBJECT IDENTIFIER ::= { lldp 8 }
lldpLocalDeviceChassisidsubtype OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local device chassis ID subtype"
::= { localDevice 1 }
lldpLocalDeviceChassisID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local device chassis ID"
::= { localDevice 2 }
lldpLocalDeviceSystemName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local device system name"
::= { localDevice 3 }
lldpLocalDeviceSystemDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local device system description"
::= { localDevice 4 }
lldpLocalDeviceCapabilitiesSupported OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local device capabilities supported"
::= { localDevice 5 }
lldpLocalDeviceCapabilitiesEnabled OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local device capabilities enabled"
::= { localDevice 6 }
lldpLocalDevicePortIDsubtype OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local device port ID subtype"
::= { localDevice 7 }
lldpLocalPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpLocalPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of LLFP local port status"
::= { localDevice 8 }
lldpLocalPortStatusEntry OBJECT-TYPE
SYNTAX LldpLocalPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of LLFP local port status"
INDEX { lldpLocalPortIndex }
::= { lldpLocalPortStatusTable 1 }
LldpLocalPortStatusEntry ::= SEQUENCE {
lldpLocalPortIndex Integer32,
lldpLocalPortStatus INTEGER,
lldpLocalPortChassisIDsubtype DisplayString,
lldpLocalPortChassisID DisplayString,
lldpLocalPortSystemname DisplayString,
lldpLocalPortSystemdescription DisplayString,
lldpLocalPortSupportedsystemcapabilities DisplayString,
lldpLocalPortEnablesystemcapabilities DisplayString,
lldpLocalPortIDsubtype DisplayString,
lldpLocalPortID DisplayString,
lldpLocalPortDescription DisplayString,
lldpLocalPortManagementAddress DisplayString,
lldpLocalPortAuto-negosupported DisplayString,
lldpLocalPortAuto-negoenabled DisplayString,
lldpLocalPortAuto-negoAdvertisedCapabilities DisplayString,
lldpLocalPortOperationMAUtype DisplayString,
lldpLocalPortIeee8023MaxFrameSize DisplayString,
lldpLocalPortAggregationCapability DisplayString,
lldpLocalPortAggregationStatus DisplayString,
lldpLocalPortAggregationPortID DisplayString,
lldpLocalPortPvid DisplayString,
lldpLocalPortVlanName DisplayString
}
lldpLocalPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of LLDP local port status"
::= { lldpLocalPortStatusEntry 1 }
lldpLocalPortStatus OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
rx-only(2),
tx-only(3),
rx-tx(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port status"
::= { lldpLocalPortStatusEntry 2 }
lldpLocalPortChassisIDsubtype OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port chassis ID subtype"
::= { lldpLocalPortStatusEntry 3 }
lldpLocalPortChassisID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port chassis ID"
::= { lldpLocalPortStatusEntry 4 }
lldpLocalPortSystemname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port system name"
::= { lldpLocalPortStatusEntry 5 }
lldpLocalPortSystemdescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port system description"
::= { lldpLocalPortStatusEntry 6 }
lldpLocalPortSupportedsystemcapabilities OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port supported system capabilities"
::= { lldpLocalPortStatusEntry 7 }
lldpLocalPortEnablesystemcapabilities OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port enable system capabilities"
::= { lldpLocalPortStatusEntry 8 }
lldpLocalPortIDsubtype OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port ID subtype"
::= { lldpLocalPortStatusEntry 9 }
lldpLocalPortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port ID"
::= { lldpLocalPortStatusEntry 10 }
lldpLocalPortDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port description"
::= { lldpLocalPortStatusEntry 11 }
lldpLocalPortManagementAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port management address"
::= { lldpLocalPortStatusEntry 12 }
lldpLocalPortAuto-negosupported OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port auto-nego supported"
::= { lldpLocalPortStatusEntry 13 }
lldpLocalPortAuto-negoenabled OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port auto-nego enabled"
::= { lldpLocalPortStatusEntry 14 }
lldpLocalPortAuto-negoAdvertisedCapabilities OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port auto-nego advertised capabilities"
::= { lldpLocalPortStatusEntry 15 }
lldpLocalPortOperationMAUtype OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port operation MAU type"
::= { lldpLocalPortStatusEntry 16 }
lldpLocalPortIeee8023MaxFrameSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port IEEE 802.3 max frame size"
::= { lldpLocalPortStatusEntry 17 }
lldpLocalPortAggregationCapability OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port aggregation capabilities"
::= { lldpLocalPortStatusEntry 18 }
lldpLocalPortAggregationStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port aggregation status"
::= { lldpLocalPortStatusEntry 19 }
lldpLocalPortAggregationPortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port aggregation port ID"
::= { lldpLocalPortStatusEntry 20 }
lldpLocalPortPvid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port PVID"
::= { lldpLocalPortStatusEntry 21 }
lldpLocalPortVlanName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP local port vlan name"
::= { lldpLocalPortStatusEntry 22 }
remoteDevice OBJECT IDENTIFIER ::= { lldp 9 }
lldpremoteDeviceTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpremoteDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of LLDP remote device"
::= { remoteDevice 1 }
lldpremoteDeviceEntry OBJECT-TYPE
SYNTAX LldpremoteDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of LLDP remote device"
INDEX { lldpremoteDeviceIndex }
::= { lldpremoteDeviceTable 1 }
LldpremoteDeviceEntry ::= SEQUENCE {
lldpremoteDeviceIndex Integer32,
lldpremoteDeviceLocalPort DisplayString,
lldpremoteDeviceChassisIDsubtype DisplayString,
lldpremoteDeviceChassisID DisplayString,
lldpremoteDevicePortIDsubtype DisplayString,
lldpremoteDevicePortID DisplayString,
lldpremoteDeviceSystemName DisplayString,
lldpremoteDeviceTimetolive DisplayString,
lldpremoteDeviceEntryIndex DisplayString,
lldpremoteDevicePortDescription DisplayString,
lldpremoteDeviceSystemdescription DisplayString,
lldpremoteDeviceSupportedsystemcapabilities DisplayString,
lldpremoteDeviceEnablesystemcapabilities DisplayString,
lldpremoteDeviceManagementAddress DisplayString,
lldpremoteDeviceAuto-negosupported DisplayString,
lldpremoteDeviceAuto-negoenabled DisplayString,
lldpremoteDeviceAuto-negoAdvertisedCapabilities DisplayString,
lldpremoteDeviceOperationMAUtype DisplayString,
lldpremoteDeviceMdipowersupportportclass DisplayString,
lldpremoteDevicePsemdipowersupport DisplayString,
lldpremoteDevicePsemdipowerstatus DisplayString,
lldpremoteDevicePsepowerpaircontrolability DisplayString,
lldpremoteDevicePsepowerpair DisplayString,
lldpremoteDevicePsepowerclass DisplayString,
lldpremoteDeviceIeee8023MaxFrameSize DisplayString,
lldpremoteDeviceAggregationCapability DisplayString,
lldpremoteDeviceAggregationStatus DisplayString,
lldpremoteDeviceAggregationPortID DisplayString,
lldpremoteDevicePvid DisplayString,
lldpremoteDeviceVlanName DisplayString,
lldpremoteDeviceRowStatus INTEGER
}
lldpremoteDeviceIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of LLDP remote device"
::= { lldpremoteDeviceEntry 1 }
lldpremoteDeviceLocalPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device local port"
::= { lldpremoteDeviceEntry 2 }
lldpremoteDeviceChassisIDsubtype OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device chassis ID subtype"
::= { lldpremoteDeviceEntry 3 }
lldpremoteDeviceChassisID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device chassis ID"
::= { lldpremoteDeviceEntry 4 }
lldpremoteDevicePortIDsubtype OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device port ID subtype"
::= { lldpremoteDeviceEntry 5 }
lldpremoteDevicePortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device port ID"
::= { lldpremoteDeviceEntry 6 }
lldpremoteDeviceSystemName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device system name"
::= { lldpremoteDeviceEntry 7 }
lldpremoteDeviceTimetolive OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device time to live"
::= { lldpremoteDeviceEntry 8 }
lldpremoteDeviceEntryIndex OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device entry index"
::= { lldpremoteDeviceEntry 9 }
lldpremoteDevicePortDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LDP remote device port description"
::= { lldpremoteDeviceEntry 10 }
lldpremoteDeviceSystemdescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device system description"
::= { lldpremoteDeviceEntry 11 }
lldpremoteDeviceSupportedsystemcapabilities OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device supported syste, capabilities"
::= { lldpremoteDeviceEntry 12 }
lldpremoteDeviceEnablesystemcapabilities OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device enable system capabilities"
::= { lldpremoteDeviceEntry 13 }
lldpremoteDeviceManagementAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device management address"
::= { lldpremoteDeviceEntry 14 }
lldpremoteDeviceAuto-negosupported OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device auto-nego supported"
::= { lldpremoteDeviceEntry 15 }
lldpremoteDeviceAuto-negoenabled OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device auto-nego enabled"
::= { lldpremoteDeviceEntry 16 }
lldpremoteDeviceAuto-negoAdvertisedCapabilities OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device auto-nego advertised capabilities"
::= { lldpremoteDeviceEntry 17 }
lldpremoteDeviceOperationMAUtype OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device operation MAU type"
::= { lldpremoteDeviceEntry 18 }
lldpremoteDeviceMdipowersupportportclass OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device PSE MDI power support class"
::= { lldpremoteDeviceEntry 19 }
lldpremoteDevicePsemdipowersupport OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device PSE MDI power support"
::= { lldpremoteDeviceEntry 20 }
lldpremoteDevicePsemdipowerstatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device PSE MDI power status"
::= { lldpremoteDeviceEntry 21 }
lldpremoteDevicePsepowerpaircontrolability OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device PSE power pair control ability"
::= { lldpremoteDeviceEntry 22 }
lldpremoteDevicePsepowerpair OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device PSE power pair"
::= { lldpremoteDeviceEntry 23 }
lldpremoteDevicePsepowerclass OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device PSE power class"
::= { lldpremoteDeviceEntry 24 }
lldpremoteDeviceIeee8023MaxFrameSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device IEEE 802.3 Max frame size"
::= { lldpremoteDeviceEntry 25 }
lldpremoteDeviceAggregationCapability OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device aggregation capabilities"
::= { lldpremoteDeviceEntry 26 }
lldpremoteDeviceAggregationStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device aggregation status"
::= { lldpremoteDeviceEntry 27 }
lldpremoteDeviceAggregationPortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device aggregation Port ID"
::= { lldpremoteDeviceEntry 28 }
lldpremoteDevicePvid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device PVID"
::= { lldpremoteDeviceEntry 29 }
lldpremoteDeviceVlanName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP remote device VLAN name"
::= { lldpremoteDeviceEntry 30 }
lldpremoteDeviceRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
desroty(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "LLDP remote device device rowstatus"
::= { lldpremoteDeviceEntry 31 }
lldpOverloadingTable OBJECT-TYPE
SYNTAX SEQUENCE OF LLDPOverloadingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of LLDP overlaoding"
::= { lldp 10 }
lldpOverloadingEntry OBJECT-TYPE
SYNTAX LLDPOverloadingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of LLDP overlaoding"
INDEX { lldpOverloadingPortIndex }
::= { lldpOverloadingTable 1 }
LLDPOverloadingEntry ::= SEQUENCE {
lldpOverloadingPortIndex Integer32,
lldpOverloadingTotal Integer32,
lldpOverloadingLeftToSend Integer32,
lldpOverloadingStatus DisplayString,
lldpOverloadingMandatoryTLVs DisplayString,
lldpOverloadingIeee8023TLVs DisplayString,
lldpOverloadingOptionalTLVs DisplayString,
lldpOverloadingIeee8021TLVs DisplayString
}
lldpOverloadingPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port index of LLDP overlaoding"
::= { lldpOverloadingEntry 1 }
lldpOverloadingTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP overloading total"
::= { lldpOverloadingEntry 2 }
lldpOverloadingLeftToSend OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP overloading left to send"
::= { lldpOverloadingEntry 3 }
lldpOverloadingStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP overloading status"
::= { lldpOverloadingEntry 4 }
lldpOverloadingMandatoryTLVs OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP overloading mandatory TLVs"
::= { lldpOverloadingEntry 5 }
lldpOverloadingIeee8023TLVs OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP overloading IEEE 802.3 TLVs"
::= { lldpOverloadingEntry 6 }
lldpOverloadingOptionalTLVs OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP overloading optional TLVs"
::= { lldpOverloadingEntry 7 }
lldpOverloadingIeee8021TLVs OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "LLDP overloading IEEE 802.1 TLVs"
::= { lldpOverloadingEntry 8 }
-- management.snmp
snmpState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP golbal setting"
::= { snmp 1 }
snmpCommunityTable OBJECT-TYPE
SYNTAX SEQUENCE OF CommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of SNMP community"
::= { snmp 2 }
snmpCommunityEntry OBJECT-TYPE
SYNTAX CommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of SNMP community"
INDEX { snmpCommunityIndex }
::= { snmpCommunityTable 1 }
CommunityEntry ::= SEQUENCE {
snmpCommunityIndex Integer32,
snmpCommunityString DisplayString,
snmpCommunityAccessRight INTEGER,
snmpCommunityRowStatus INTEGER
}
snmpCommunityIndex OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of SNMP community"
::= { snmpCommunityEntry 1 }
snmpCommunityString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of SNMP community"
::= { snmpCommunityEntry 2 }
snmpCommunityAccessRight OBJECT-TYPE
SYNTAX INTEGER {
ro(1),
rw(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SNMP access mode"
::= { snmpCommunityEntry 3 }
snmpCommunityRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2),
createAndWait(5),
destory(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry."
::= { snmpCommunityEntry 99 }
snmpTrapHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpTrapHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of SNMP trap host"
::= { snmp 3 }
snmpTrapHostEntry OBJECT-TYPE
SYNTAX SnmpTrapHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of SNMP trap host"
INDEX { snmpTrapHostIndex }
::= { snmpTrapHostTable 1 }
SnmpTrapHostEntry ::= SEQUENCE {
snmpTrapHostIndex Integer32,
snmpTrapHostIpaddress DisplayString,
snmpTrapHostCommunityName DisplayString,
snmpTrapHostVersion INTEGER,
snmpTrapHostRowStatus INTEGER
}
snmpTrapHostIndex OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of SNMP trap host"
::= { snmpTrapHostEntry 1 }
snmpTrapHostIpaddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ipaddress or hostname of SNMP trap host"
::= { snmpTrapHostEntry 2 }
snmpTrapHostCommunityName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The community name of SNMP trap host"
::= { snmpTrapHostEntry 3 }
snmpTrapHostVersion OBJECT-TYPE
SYNTAX INTEGER {
v1(1),
v2cTrap(2),
v2cInform(3),
v3Trap(4),
v3Inform(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The SNMP version of SNMP trap host"
::= { snmpTrapHostEntry 4 }
snmpTrapHostRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2),
createAndWait(5),
destory(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry."
::= { snmpTrapHostEntry 99 }
snmpv3UserTable OBJECT-TYPE
SYNTAX SEQUENCE OF SNMPv3UserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of SNMPv3 user"
::= { snmp 4 }
snmpv3UserEntry OBJECT-TYPE
SYNTAX SNMPv3UserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of SNMPv3 user"
INDEX { snmpv3UserIndex }
::= { snmpv3UserTable 1 }
SNMPv3UserEntry ::= SEQUENCE {
snmpv3UserIndex Integer32,
snmpv3UserName DisplayString,
snmpv3UserAccessRight INTEGER,
snmpv3UserAuthProtocol INTEGER,
snmpv3UserAuthPassword DisplayString,
snmpv3UserPrivProtocol INTEGER,
snmpv3UserPrivPassword DisplayString,
snmpv3UserRowStatus INTEGER
}
snmpv3UserIndex OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of SNMPv3 user"
::= { snmpv3UserEntry 1 }
snmpv3UserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of SNMPv3 user. Please input more than 8 characters."
::= { snmpv3UserEntry 2 }
snmpv3UserAccessRight OBJECT-TYPE
SYNTAX INTEGER {
readonly(1),
readwrite(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The access right of SNMPv3 user"
::= { snmpv3UserEntry 3 }
snmpv3UserAuthProtocol OBJECT-TYPE
SYNTAX INTEGER {
none(1),
md5(2),
sha(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The authentication protocol of SNMPv3 user"
::= { snmpv3UserEntry 4 }
snmpv3UserAuthPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The authentication password of SNMPv3 user.The password
must be at least eight characters long.The password can
include alphabetic, numeric, and '-', '_', '.'"
::= { snmpv3UserEntry 5 }
snmpv3UserPrivProtocol OBJECT-TYPE
SYNTAX INTEGER {
none(1),
des(2),
aes(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The priviledge protocol of SNMPv3 user"
::= { snmpv3UserEntry 6 }
snmpv3UserPrivPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The priviledge password of SNMPv3 user.The password
must be at least eight characters long.The password can
include alphabetic, numeric, and '-', '_', '.'"
::= { snmpv3UserEntry 7 }
snmpv3UserRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2),
createAndWait(5),
destory(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry."
::= { snmpv3UserEntry 99 }
snmpv3EngineID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The snmpv3 engine ID"
::= { snmp 5 }
-- management.poe
poeSystemSetting OBJECT IDENTIFIER ::= { poe 1 }
poeFwVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The PoE firmware version"
::= { poeSystemSetting 1 }
poeMaxPowerAvailable OBJECT-TYPE
SYNTAX INTEGER (0..720)
UNITS "W"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximum power available in PoE.
actual maximun power value is different according Switch Model.
ex : EKI-7710G maximun poe power value is 120W.
EKI-7712G maximun poe power value is 240W. "
::= { poeSystemSetting 2 }
poeActualPowerConsumption OBJECT-TYPE
SYNTAX INTEGER
UNITS "W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The actual power consumption in PoE"
::= { poeSystemSetting 3 }
poeOverLoadDisconnect OBJECT-TYPE
SYNTAX INTEGER {
overload-port-first(1),
port-based-priority(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The overload disconnect mode in PoE"
::= { poeSystemSetting 4 }
poePortSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF PoEPortSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of PoE port setting"
::= { poe 2 }
poePortSettingEntry OBJECT-TYPE
SYNTAX PoEPortSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of PoE port setting"
INDEX { poePortIndex }
::= { poePortSettingTable 1 }
PoEPortSettingEntry ::= SEQUENCE {
poePortIndex Integer32,
poePortState INTEGER,
poePortLegacy INTEGER,
poePortPowerLimitClass INTEGER,
poePortPriority INTEGER,
poePortPowerLimit Integer32
}
poePortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of PoE port setting"
::= { poePortSettingEntry 1 }
poePortState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of PoE port"
::= { poePortSettingEntry 2 }
poePortLegacy OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The legacy of PoE port"
::= { poePortSettingEntry 3 }
poePortPowerLimitClass OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The power limit form classification of PoE port"
::= { poePortSettingEntry 4 }
poePortPriority OBJECT-TYPE
SYNTAX INTEGER {
low(1),
medium(2),
high(3),
critical(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The priority of PoE port"
::= { poePortSettingEntry 5 }
poePortPowerLimit OBJECT-TYPE
SYNTAX Integer32 (0..30000)
UNITS "mW"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The power limit of PoE port"
::= { poePortSettingEntry 6 }
poePortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF PoEPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of PoE port status"
::= { poe 3 }
poePortStatusEntry OBJECT-TYPE
SYNTAX PoEPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of PoE port status"
INDEX { poePortStatusIndex }
::= { poePortStatusTable 1 }
PoEPortStatusEntry ::= SEQUENCE {
poePortStatusIndex Integer32,
poePortCurrent DisplayString,
poePortVoltage DisplayString,
poePortPower DisplayString,
poePortTemp DisplayString
}
poePortStatusIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of PoE port status"
::= { poePortStatusEntry 1 }
poePortCurrent OBJECT-TYPE
SYNTAX DisplayString
UNITS "mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current of PoE port"
::= { poePortStatusEntry 2 }
poePortVoltage OBJECT-TYPE
SYNTAX DisplayString
UNITS "V"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The voltage of PoE port"
::= { poePortStatusEntry 3 }
poePortPower OBJECT-TYPE
SYNTAX DisplayString
UNITS "W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The power of PoE port"
::= { poePortStatusEntry 4 }
poePortTemp OBJECT-TYPE
SYNTAX DisplayString
UNITS "C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The temperature of PoE port"
::= { poePortStatusEntry 5 }
-- management.tcpModbus
tcpModbusState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of TCP Modbus"
::= { tcpModbus 1 }
tcpModbusTimeout OBJECT-TYPE
SYNTAX Integer32 (1..32767)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The time out of TCP Modbus"
::= { tcpModbus 2 }
-- management.dhcpServer
dhcpServerState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The state of DHCP Server"
::= { dhcpServer 1 }
dhcpServerGlobalSetting OBJECT IDENTIFIER ::= { dhcpServer 2 }
dhcpServerLeaseTime OBJECT-TYPE
SYNTAX INTEGER (60..864000)
UNITS "second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The lease time of DHCP server"
::= { dhcpServerGlobalSetting 1 }
dhcpServerLowIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The low IP address of DHCP server"
::= { dhcpServerGlobalSetting 2 }
dhcpServerHighIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The high IP address of DHCP server"
::= { dhcpServerGlobalSetting 3 }
dhcpServerSubmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The subnet mask of DHCP server"
::= { dhcpServerGlobalSetting 4 }
dhcpServerGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The gateway of DHCP server"
::= { dhcpServerGlobalSetting 5 }
dhcpServerDNS OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DNS of DHCP server"
::= { dhcpServerGlobalSetting 6 }
dhcpServerStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If user set golbal setting with SNMP, the value would not apply to
swith. They need to set active(1) to apply into switch."
::= { dhcpServerGlobalSetting 7 }
dhcpServerClearIpPool OBJECT-TYPE
SYNTAX INTEGER {
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear IP pool in DHCP Server"
::= { dhcpServerGlobalSetting 8 }
dhcpServerPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF DHCPServerPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of DHCP server port setting"
::= { dhcpServer 3 }
dhcpServerPortEntry OBJECT-TYPE
SYNTAX DHCPServerPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of DHCP server port setting"
INDEX { dhcpServerPortIndex }
::= { dhcpServerPortTable 1 }
DHCPServerPortEntry ::= SEQUENCE {
dhcpServerPortIndex Integer32,
dhcpServerPortLowIP IpAddress,
dhcpServerPortHighIP IpAddress,
dhcpServerPortMask IpAddress,
dhcpServerPortGW IpAddress,
dhcpServerPortDNS IpAddress,
dhcpServerPortStatus INTEGER,
dhcpServerPortClear INTEGER
}
dhcpServerPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of DHCP server port setting"
::= { dhcpServerPortEntry 1 }
dhcpServerPortLowIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The low IP address of DHCP server port"
::= { dhcpServerPortEntry 2 }
dhcpServerPortHighIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The high IP address of DHCP server port"
::= { dhcpServerPortEntry 3 }
dhcpServerPortMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The subnet mask of DHCP server port"
::= { dhcpServerPortEntry 4 }
dhcpServerPortGW OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The gateway of DHCP server port"
::= { dhcpServerPortEntry 5 }
dhcpServerPortDNS OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DNS of DHCP server port"
::= { dhcpServerPortEntry 6 }
dhcpServerPortStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If user set port setting with SNMP, the value would not apply to
swith. They need to set active(1) to apply into switch."
::= { dhcpServerPortEntry 7 }
dhcpServerPortClear OBJECT-TYPE
SYNTAX INTEGER {
nothing(0),
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear IP poll on DHCP server port"
::= { dhcpServerPortEntry 8 }
dhcpServerOpt82Table OBJECT-TYPE
SYNTAX SEQUENCE OF DHCPServerOpt82Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of DHCP option 82 setting"
::= { dhcpServer 4 }
dhcpServerOpt82Entry OBJECT-TYPE
SYNTAX DHCPServerOpt82Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of DHCP option 82 setting"
INDEX { dhcpServerOpt82Index }
::= { dhcpServerOpt82Table 1 }
DHCPServerOpt82Entry ::= SEQUENCE {
dhcpServerOpt82Index Integer32,
dhcpServerOpt82CircuitIDFormat INTEGER,
dhcpServerOpt82CircuitID DisplayString,
dhcpServerOpt82RemoteIDFormat INTEGER,
dhcpServerOpt82RemoteID DisplayString,
dhcpServerOpt82LowIP IpAddress,
dhcpServerOpt82HighIP IpAddress,
dhcpServerOpt82Mask IpAddress,
dhcpServerOpt82GW IpAddress,
dhcpServerOpt82DNS IpAddress,
dhcpServerOpt82Status INTEGER,
dhcpServerOpt82Clear INTEGER
}
dhcpServerOpt82Index OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of DHCP server option 82 setting"
::= { dhcpServerOpt82Entry 1 }
dhcpServerOpt82CircuitIDFormat OBJECT-TYPE
SYNTAX INTEGER {
string(1),
hex(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The circuit ID format of DHCP option 82"
::= { dhcpServerOpt82Entry 2 }
dhcpServerOpt82CircuitID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The circuit ID of DHCP option 82"
::= { dhcpServerOpt82Entry 3 }
dhcpServerOpt82RemoteIDFormat OBJECT-TYPE
SYNTAX INTEGER {
string(1),
hex(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The remote ID format of DHCP option 82"
::= { dhcpServerOpt82Entry 4 }
dhcpServerOpt82RemoteID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The remote ID of DHCP option 82"
::= { dhcpServerOpt82Entry 5 }
dhcpServerOpt82LowIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The low IP address of DHCP option 82"
::= { dhcpServerOpt82Entry 6 }
dhcpServerOpt82HighIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The high IP address of DHCP option 82"
::= { dhcpServerOpt82Entry 7 }
dhcpServerOpt82Mask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The subnet mask of DHCP option 82"
::= { dhcpServerOpt82Entry 8 }
dhcpServerOpt82GW OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The gateway of DHCP option 82"
::= { dhcpServerOpt82Entry 9 }
dhcpServerOpt82DNS OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DNS of DHCP option 82"
::= { dhcpServerOpt82Entry 10 }
dhcpServerOpt82Status OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If user set option82 setting with SNMP, the value would not apply to
swith. They need to set active(1) to apply into switch."
::= { dhcpServerOpt82Entry 11 }
dhcpServerOpt82Clear OBJECT-TYPE
SYNTAX INTEGER {
nothing(0),
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear IP poll on DHCP option 82"
::= { dhcpServerOpt82Entry 12 }
dhcpServerLeaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF DHCPServerLeaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of DHCP server lease entry"
::= { dhcpServer 5 }
dhcpServerLeaseEntry OBJECT-TYPE
SYNTAX DHCPServerLeaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of DHCP server lease entry"
INDEX { dhcpServerLeaseIndex }
::= { dhcpServerLeaseTable 1 }
DHCPServerLeaseEntry ::= SEQUENCE {
dhcpServerLeaseIndex Integer32,
dhcpServerLeaseIp DisplayString,
dhcpServerLeaseClientMac DisplayString,
dhcpServerLeaseStartTime DisplayString,
dhcpServerLeaseEndTime DisplayString,
dhcpServerLeaseType DisplayString
}
dhcpServerLeaseIndex OBJECT-TYPE
SYNTAX Integer32 (0..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of DHCP server lease entry"
::= { dhcpServerLeaseEntry 1 }
dhcpServerLeaseIp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP address of DHCP server lease entry"
::= { dhcpServerLeaseEntry 2 }
dhcpServerLeaseClientMac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The client MAC of DHCP server lease entry"
::= { dhcpServerLeaseEntry 3 }
dhcpServerLeaseStartTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The start time of DHCP server lease entry"
::= { dhcpServerLeaseEntry 4 }
dhcpServerLeaseEndTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The end time of DHCP server lease entry"
::= { dhcpServerLeaseEntry 5 }
dhcpServerLeaseType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of DHCP server lease entry"
::= { dhcpServerLeaseEntry 6 }
dhcpServerRestart OBJECT-TYPE
SYNTAX INTEGER {
restart(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Restart DHCP Server"
::= { dhcpServer 6 }
dhcpServerVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF DHCPServerVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of DHCP VLAN setting"
::= { dhcpServer 7 }
dhcpServerVlanEntry OBJECT-TYPE
SYNTAX DHCPServerVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of DHCP VLAN setting"
INDEX { dhcpServerVlanIndex }
::= { dhcpServerVlanTable 1 }
DHCPServerVlanEntry ::= SEQUENCE {
dhcpServerVlanIndex Integer32,
dhcpServerVlanId Integer32,
dhcpServerVlanLowIP IpAddress,
dhcpServerVlanHighIP IpAddress,
dhcpServerVlanMask IpAddress,
dhcpServerVlanGW IpAddress,
dhcpServerVlanDNS IpAddress,
dhcpServerVlanStatus INTEGER,
dhcpServerVlanClear INTEGER
}
dhcpServerVlanIndex OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of DHCP server VLAN setting"
::= { dhcpServerVlanEntry 1 }
dhcpServerVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VLAN ID of DHCP VLAN setting"
::= { dhcpServerVlanEntry 2 }
dhcpServerVlanLowIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The low IP address of DHCP VLAN"
::= { dhcpServerVlanEntry 3 }
dhcpServerVlanHighIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The high IP address of DHCP VLAN"
::= { dhcpServerVlanEntry 4 }
dhcpServerVlanMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The subnet mask of DHCP VLAN"
::= { dhcpServerVlanEntry 5 }
dhcpServerVlanGW OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The gateway of DHCP VLAN"
::= { dhcpServerVlanEntry 6 }
dhcpServerVlanDNS OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DNS of DHCP VLAN"
::= { dhcpServerVlanEntry 7 }
dhcpServerVlanStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If user set VLAN setting with SNMP, the value would not apply to
swith. They need to set active(1) to apply into switch."
::= { dhcpServerVlanEntry 8 }
dhcpServerVlanClear OBJECT-TYPE
SYNTAX INTEGER {
nothing(0),
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear IP poll on DHCP VLAN"
::= { dhcpServerVlanEntry 9 }
dhcpServerClientMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpServerClientMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of DHCP client mac setting"
::= { dhcpServer 8 }
dhcpServerClientMacEntry OBJECT-TYPE
SYNTAX DhcpServerClientMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of DHCP server client mac setting"
INDEX { dhcpServerClientMacEntryID }
::= { dhcpServerClientMacTable 1 }
DhcpServerClientMacEntry ::= SEQUENCE {
dhcpServerClientMacEntryID Integer32,
dhcpServerClientMacEntryMac DisplayString,
dhcpServerClientMacEntryIP IpAddress,
dhcpServerClientMacEntryMask IpAddress,
dhcpServerClientMacEntryGW IpAddress,
dhcpServerClientMacEntryDNS IpAddress,
dhcpServerClientMacEntryRowStatus INTEGER
}
dhcpServerClientMacEntryID OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The index of DHCP server client mac entry"
::= { dhcpServerClientMacEntry 1 }
dhcpServerClientMacEntryMac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The MAC address of DHCP server client mac entry."
::= { dhcpServerClientMacEntry 2 }
dhcpServerClientMacEntryIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of DHCP server client mac entry."
::= { dhcpServerClientMacEntry 3 }
dhcpServerClientMacEntryMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The subnet mask of DHCP DHCP server client mac entry."
::= { dhcpServerClientMacEntry 4 }
dhcpServerClientMacEntryGW OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The gateway of DHCP DHCP server client mac entry."
::= { dhcpServerClientMacEntry 5 }
dhcpServerClientMacEntryDNS OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The DNS of DHCP DHCP server client mac entry."
::= { dhcpServerClientMacEntry 6 }
dhcpServerClientMacEntryRowStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry."
::= { dhcpServerClientMacEntry 7 }
-- management.smtpClient
smtpActiveProfile OBJECT-TYPE
SYNTAX INTEGER {
one(1),
two(2),
none(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The active profile of SMTP client"
::= { smtpClient 1 }
smtpProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF SMTPProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of SMTP client profile"
::= { smtpClient 2 }
smtpProfileEntry OBJECT-TYPE
SYNTAX SMTPProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of SMTP client profile"
INDEX { smtpProfileIndex }
::= { smtpProfileTable 1 }
SMTPProfileEntry ::= SEQUENCE {
smtpProfileIndex Integer32,
smtpServerIp DisplayString,
smtpServerPort Integer32,
smtpSenderMail DisplayString,
smtpTargetMail1 DisplayString,
smtpTargetMail2 DisplayString,
smtpTargetMail3 DisplayString,
smtpTargetMail4 DisplayString,
smtpTargetMail5 DisplayString,
smtpTargetMail6 DisplayString,
smtpTargetMail7 DisplayString,
smtpTargetMail8 DisplayString
}
smtpProfileIndex OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of SMTP client profile"
::= { smtpProfileEntry 1 }
smtpServerIp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The SMTP server IP"
::= { smtpProfileEntry 2 }
smtpServerPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SMTP server port"
::= { smtpProfileEntry 3 }
smtpSenderMail OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The SMTP sender mail"
::= { smtpProfileEntry 4 }
smtpTargetMail1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The SMTP target mail 1"
::= { smtpProfileEntry 5 }
smtpTargetMail2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The SMTP target mail 2"
::= { smtpProfileEntry 6 }
smtpTargetMail3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The SMTP target mail 3"
::= { smtpProfileEntry 7 }
smtpTargetMail4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The SMTP target mail 4"
::= { smtpProfileEntry 8 }
smtpTargetMail5 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The SMTP target mail 5"
::= { smtpProfileEntry 9 }
smtpTargetMail6 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The SMTP target mail 6"
::= { smtpProfileEntry 10 }
smtpTargetMail7 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The SMTP target mail 7"
::= { smtpProfileEntry 11 }
smtpTargetMail8 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The SMTP target mail 8"
::= { smtpProfileEntry 12 }
-- management.rmon
rmonStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RMONStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of RMON Statistics"
::= { rmon 1 }
rmonStatisticsEntry OBJECT-TYPE
SYNTAX RMONStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of RMON Statistics"
INDEX { rmonStatisticsIndex }
::= { rmonStatisticsTable 1 }
RMONStatisticsEntry ::= SEQUENCE {
rmonStatisticsIndex Integer32,
rmonStatisticsPort Integer32,
rmonStatisticsDropEvents Counter32,
rmonStatisticsOctets Counter32,
rmonStatisticsPackets Counter32,
rmonStatisticsBroadcast Counter32,
rmonStatisticsMulticast Counter32,
rmonStatisticsOwner DisplayString,
rmonStatisticsRowStatus INTEGER
}
rmonStatisticsIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The index of RMON Statistics"
::= { rmonStatisticsEntry 1 }
rmonStatisticsPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port number of RMON Statistics"
::= { rmonStatisticsEntry 2 }
rmonStatisticsDropEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The drop events of RMON Statistics"
::= { rmonStatisticsEntry 3 }
rmonStatisticsOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The octets of RMON Statistics"
::= { rmonStatisticsEntry 4 }
rmonStatisticsPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The packets of RMON Statistics"
::= { rmonStatisticsEntry 5 }
rmonStatisticsBroadcast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The broadcast of RMON Statistics"
::= { rmonStatisticsEntry 6 }
rmonStatisticsMulticast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The multicast of RMON Statistics"
::= { rmonStatisticsEntry 7 }
rmonStatisticsOwner OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The owner of RMON Statistics"
::= { rmonStatisticsEntry 8 }
rmonStatisticsRowStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry."
::= { rmonStatisticsEntry 9 }
rmonHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF RMONHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of RMON history"
::= { rmon 2 }
rmonHistoryEntry OBJECT-TYPE
SYNTAX RMONHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of RMON history"
INDEX { rmonHistoryIndex }
::= { rmonHistoryTable 1 }
RMONHistoryEntry ::= SEQUENCE {
rmonHistoryIndex Integer32,
rmonHistoryPort Integer32,
rmonHistoryBucketsRequest Integer32,
-- rmonHistoryBucketsGrant Integer32,
rmonHistoryInterval Integer32,
rmonHistoryOwner DisplayString,
rmonHistoryRowStatus INTEGER
}
rmonHistoryIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The index of RMON history"
::= { rmonHistoryEntry 1 }
rmonHistoryPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port number of RMON history"
::= { rmonHistoryEntry 2 }
rmonHistoryBucketsRequest OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The buckets requested of RMON history"
::= { rmonHistoryEntry 3 }
-- rmonHistoryBucketsGrant OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The buckets granted of RMON history"
-- ::= { rmonHistoryEntry 4 }
rmonHistoryInterval OBJECT-TYPE
SYNTAX Integer32 (1..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The index of RMON history"
::= { rmonHistoryEntry 5 }
rmonHistoryOwner OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port number of RMON history"
::= { rmonHistoryEntry 6 }
rmonHistoryRowStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry."
::= { rmonHistoryEntry 7 }
rmonAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF RMONAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of RMON alarm"
::= { rmon 3 }
rmonAlarmEntry OBJECT-TYPE
SYNTAX RMONAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of RMON alarm"
INDEX { rmonAlarmIndex }
::= { rmonAlarmTable 1 }
RMONAlarmEntry ::= SEQUENCE {
rmonAlarmIndex Integer32,
rmonAlarmInterval Integer32,
rmonAlarmVariable DisplayString,
rmonAlarmSampleType INTEGER,
rmonAlarmRisingThreshold Integer32,
rmonAlarmFallingThreshold Integer32,
rmonAlarmRisingEventIndex Integer32,
rmonAlarmFallingEventIndex Integer32,
rmonAlarmOwner DisplayString,
rmonAlarmRowStatus INTEGER
}
rmonAlarmIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The index of RMON alarm"
::= { rmonAlarmEntry 1 }
rmonAlarmInterval OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interval of RMON alarm"
::= { rmonAlarmEntry 2 }
rmonAlarmVariable OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The variable of RMON alarm"
::= { rmonAlarmEntry 3 }
rmonAlarmSampleType OBJECT-TYPE
SYNTAX INTEGER {
absolute(1),
delta(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The sample type of RMON alarm"
::= { rmonAlarmEntry 4 }
rmonAlarmRisingThreshold OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The rising threshold of RMON alarm"
::= { rmonAlarmEntry 5 }
rmonAlarmFallingThreshold OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The falling threshold of RMON alarm"
::= { rmonAlarmEntry 6 }
rmonAlarmRisingEventIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The rising event index of RMON alarm"
::= { rmonAlarmEntry 7 }
rmonAlarmFallingEventIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The falling event indx of RMON alarm"
::= { rmonAlarmEntry 8 }
rmonAlarmOwner OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The owner of RMON alarm"
::= { rmonAlarmEntry 9 }
rmonAlarmRowStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry."
::= { rmonAlarmEntry 10 }
rmonEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF RMONEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of RMON event"
::= { rmon 4 }
rmonEventEntry OBJECT-TYPE
SYNTAX RMONEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of RMON event"
INDEX { rmonEventIndex }
::= { rmonEventTable 1 }
RMONEventEntry ::= SEQUENCE {
rmonEventIndex Integer32,
rmonEventDescription DisplayString,
rmonEventType INTEGER,
rmonEventCommunity DisplayString,
rmonEventOwner DisplayString,
-- rmonEventLastTimeSend DisplayString,
rmonEventRowStatus INTEGER
}
rmonEventIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The index of RMON event"
::= { rmonEventEntry 1 }
rmonEventDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The description of RMON event"
::= { rmonEventEntry 2 }
rmonEventType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
log(2),
trap(3),
logTrap(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The type of RMON event"
::= { rmonEventEntry 3 }
rmonEventCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The community of RMON event"
::= { rmonEventEntry 4 }
rmonEventOwner OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The owner of RMON event"
::= { rmonEventEntry 5 }
-- rmonEventLastTimeSend OBJECT-TYPE
-- SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION "The last time send of RMON event"
-- ::= { rmonEventEntry 6 }
rmonEventRowStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createRequest(2) to create new entry.
After setup the value, user use valid(1) to set into switch.
User can use destory to invalid(4) an entry."
::= { rmonEventEntry 7 }
-- management.ntp
ntpServer OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/disable NTP server."
::= { ntp 1 }
ntpManualTime OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable/disable NTP manual time."
::= { ntp 2 }
ntpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of NTP server"
::= { ntp 3 }
ntpServerEntry OBJECT-TYPE
SYNTAX NtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of NTP server"
INDEX { ntpServerIndex }
::= { ntpServerTable 1 }
NtpServerEntry ::= SEQUENCE {
ntpServerIndex Integer32,
ntpServerIp IpAddress
}
ntpServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of NTP server"
::= { ntpServerEntry 1 }
ntpServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ip address of NTP server"
::= { ntpServerEntry 2 }
-- diagnostics
copperTest OBJECT IDENTIFIER ::= { diagnostics 1 }
pingTest OBJECT IDENTIFIER ::= { diagnostics 2 }
ipv6pingTest OBJECT IDENTIFIER ::= { diagnostics 3 }
loggingSetting OBJECT IDENTIFIER ::= { diagnostics 4 }
factoryDefault OBJECT IDENTIFIER ::= { diagnostics 5 }
reboot OBJECT IDENTIFIER ::= { diagnostics 6 }
dhcpAutoProvision OBJECT IDENTIFIER ::= { diagnostics 7 }
ledIndication OBJECT IDENTIFIER ::= { diagnostics 8 }
-- diagnostic.copperTest
portNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port ID for copper test"
::= { copperTest 1 }
copperTestAction OBJECT-TYPE
SYNTAX INTEGER {
copperTest(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Copper test action"
::= { copperTest 2 }
copperTestResult OBJECT IDENTIFIER ::= { copperTest 3 }
resultPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The copper test port ID"
::= { copperTestResult 1 }
channelA OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The copper test result for channel A"
::= { copperTestResult 2 }
cableLengthA OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The copper test result for cable length A"
::= { copperTestResult 3 }
channelB OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The copper test result for channel B"
::= { copperTestResult 4 }
cableLengthB OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The copper test result forcable length B"
::= { copperTestResult 5 }
channelC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The copper test result for channel C"
::= { copperTestResult 6 }
cableLengthC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The copper test result for cable length C"
::= { copperTestResult 7 }
channelD OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The copper test result for channel D"
::= { copperTestResult 8 }
cableLengthD OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The copper test result for cable length D"
::= { copperTestResult 9 }
channelRx OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The copper test result for channel Rx"
::= { copperTestResult 10 }
cableLengthRx OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The copper test result for cable length Rx"
::= { copperTestResult 11 }
channelTx OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The copper test result for channel Tx"
::= { copperTestResult 12 }
cableLengthTx OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The copper test result for cable length Tx"
::= { copperTestResult 13 }
-- diagnostic.pingTest
pingIPAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address or hostname of ping target"
::= { pingTest 1 }
pingCount OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "How many times to send ping request packets"
::= { pingTest 2 }
pingInterval OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Time interval between each ping request packets"
::= { pingTest 3 }
pingSize OBJECT-TYPE
SYNTAX Integer32 (8..5120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The size of ping packet"
::= { pingTest 4 }
pingAction OBJECT-TYPE
SYNTAX INTEGER {
ping(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ping action"
::= { pingTest 5 }
pingResult OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "After ping finished, results will show in this OID"
::= { pingTest 6 }
-- diagnostic.ipv6pingTest
pingIPv6Address OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IPv6 address of ping target"
::= { ipv6pingTest 1 }
pingIPv6Count OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "How many times to send ping request packet"
::= { ipv6pingTest 2 }
pingIPv6Interval OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Time interval between each ping request packet"
::= { ipv6pingTest 3 }
pingIPv6Size OBJECT-TYPE
SYNTAX Integer32 (8..5120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The size of ping packet"
::= { ipv6pingTest 4 }
pingIPv6Action OBJECT-TYPE
SYNTAX INTEGER {
ping(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IPv6 ping action"
::= { ipv6pingTest 5 }
pingIPv6Result OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "After ping finished, results will show in this field"
::= { ipv6pingTest 6 }
-- diagnostic.loggingSetting
loggingService OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable logging system"
::= { loggingSetting 1 }
localLoggingTable OBJECT-TYPE
SYNTAX SEQUENCE OF LocalLoggingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of local logging"
::= { loggingSetting 2 }
localLoggingEntry OBJECT-TYPE
SYNTAX LocalLoggingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of local logging"
INDEX { localLoggingIndex }
::= { localLoggingTable 1 }
LocalLoggingEntry ::= SEQUENCE {
localLoggingIndex Integer32,
bufferedtarget INTEGER,
localLoggingStatus INTEGER,
localLoggingSeverity BITS
}
localLoggingIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of local logging"
::= { localLoggingEntry 1 }
bufferedtarget OBJECT-TYPE
SYNTAX INTEGER {
buffered(1),
console(2),
file(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The target to store log message
Buffered: Store log messages in device buffer.
File: Store log message in file.
Console: Show the log message on console."
::= { localLoggingEntry 2 }
localLoggingStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Enable/Disable status the logging system"
::= { localLoggingEntry 3 }
localLoggingSeverity OBJECT-TYPE
SYNTAX BITS {
emerg(0),
alert(1),
crit(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Severity of log message which will be stored"
::= { localLoggingEntry 4 }
remoteloggingTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteloggingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of remote logging"
::= { loggingSetting 3 }
remoteloggingEntry OBJECT-TYPE
SYNTAX RemoteloggingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of remote logging"
INDEX { serverAddress }
::= { remoteloggingTable 1 }
RemoteloggingEntry ::= SEQUENCE {
remoteloggingIndex Integer32,
remoteloggingAddress IpAddress,
remoteloggingPort Integer32,
remoteloggingSeverity BITS,
remoteloggingFacility INTEGER,
remoteloggingRowStatus INTEGER
}
remoteloggingIndex OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of remote logging"
::= { remoteloggingEntry 1 }
remoteloggingAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of remote log server"
::= { remoteloggingEntry 2 }
remoteloggingPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port number of remote log server"
::= { remoteloggingEntry 3 }
remoteloggingSeverity OBJECT-TYPE
SYNTAX BITS {
emerg(0),
alert(1),
crit(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The severity of log messages which will be sent"
::= { remoteloggingEntry 4 }
remoteloggingFacility OBJECT-TYPE
SYNTAX INTEGER {
local0(1),
local1(2),
local2(3),
local3(4),
local4(5),
local5(6),
local6(7),
local7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The facility of log messages which will be sent"
::= { remoteloggingEntry 5 }
remoteloggingRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2),
createAndWait(5),
destory(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry."
::= { remoteloggingEntry 99 }
-- diagnostic.factoryDefault
factoryDefaultAction OBJECT-TYPE
SYNTAX INTEGER {
factoryDefault(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "user to restore switch to factory default"
::= { factoryDefault 1 }
factoryDefaultKeepFlag OBJECT-TYPE
SYNTAX BITS {
vlan(1),
ipaddress(2),
useraccount(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Keep setting when switch is restore to factory default."
::= { factoryDefault 2 }
-- diagnostic.reboot
rebootAction OBJECT-TYPE
SYNTAX INTEGER {
reboot(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "user to reboot the switch"
::= { reboot 1 }
-- diagnostic.dhcpAutoProvision
dhcpAutoProvisionEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of DHCP auto provision"
::= { dhcpAutoProvision 1 }
-- diagnostic.ledIndication
ledAlarmState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable LED alarm"
::= { ledIndication 1 }
ledPowerFailureEvent OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable LED power failure event"
::= { ledIndication 2 }
ledFiberLinkdownEvent OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable LED fiber port Link down event"
::= { ledIndication 3 }
ledPortLinkdownEvent OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/Disable LED port Link down event"
::= { ledIndication 4 }
ledPortLinkdownEventPort OBJECT-TYPE
SYNTAX BITS {
port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port9(8), port10(9),
port11(10), port12(11), port13(12), port14(13), port15(14), port16(15), port17(16), port18(17), port19(18), port20(19),
port21(20), port22(21), port23(22), port24(23), port25(24), port26(25), port27(26), port28(27), port29(28), port30(29),
port31(30), port32(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The member ports of LED port Link down event"
::= { ledIndication 5 }
ledEventInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF LedEventInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of led event info"
::= { ledIndication 6 }
ledEventInfoEntry OBJECT-TYPE
SYNTAX LedEventInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of led event info"
INDEX { ledEventIndex }
::= { ledEventInfoTable 1 }
LedEventInfoEntry ::= SEQUENCE {
ledEventIndex Integer32,
ledType DisplayString,
ledEvent DisplayString,
ledState DisplayString,
ledErrorTimes Integer32
}
ledEventIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of led event info"
::= { ledEventInfoEntry 1 }
ledType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of led event info"
::= { ledEventInfoEntry 2 }
ledEvent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The event of led event info"
::= { ledEventInfoEntry 3 }
ledState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The state of led event info"
::= { ledEventInfoEntry 4}
ledErrorTimes OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The error times of led event info"
::= { ledEventInfoEntry 5 }
-- maintenance
backupManager OBJECT IDENTIFIER ::= { maintenance 1 }
upgradeManager OBJECT IDENTIFIER ::= { maintenance 2 }
dualImage OBJECT IDENTIFIER ::= { maintenance 3 }
configurationManager OBJECT IDENTIFIER ::= { maintenance 4 }
accountManager OBJECT IDENTIFIER ::= { maintenance 5 }
nKey OBJECT IDENTIFIER ::= { maintenance 6 }
-- maintenance.backupManager
backupMethod OBJECT-TYPE
SYNTAX INTEGER {
tftp(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The method of backup file"
::= { backupManager 1 }
backupServerIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of the TFTP server"
::= { backupManager 2 }
backupType OBJECT-TYPE
SYNTAX INTEGER {
image(1),
startupConfig(2),
runningConfig(3),
flashlog(5),
bufferlog(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The backup configuration type"
::= { backupManager 3 }
backupImage OBJECT-TYPE
SYNTAX INTEGER {
partition0(1),
partition1(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The backup firmware image"
::= { backupManager 4 }
backupAction OBJECT-TYPE
SYNTAX INTEGER {
backup(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The backup action"
::= { backupManager 5 }
-- maintenance.upgradeManager
upgradeMethod OBJECT-TYPE
SYNTAX INTEGER {
tftp(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The upgrade file method"
::= { upgradeManager 1 }
upgradeServerIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The server IP address"
::= { upgradeManager 2 }
upgradeFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The upgrade file name"
::= { upgradeManager 3 }
upgradeType OBJECT-TYPE
SYNTAX INTEGER {
image(1),
startupConfig(2),
runningConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The upgrade type"
::= { upgradeManager 4 }
upgradeImage OBJECT-TYPE
SYNTAX INTEGER {
active(1),
backup(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The uprade firmware image"
::= { upgradeManager 5 }
upgradeAction OBJECT-TYPE
SYNTAX INTEGER {
upgrade(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The upgrade action"
::= { upgradeManager 6 }
upgradeStatus OBJECT-TYPE
SYNTAX INTEGER {
on-going(1),
done(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The upgrade status"
::= { upgradeManager 7 }
-- maintenance.dualImage
activeImage OBJECT-TYPE
SYNTAX INTEGER {
image1(1),
image2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The active image"
::= { dualImage 1 }
imageInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF ImageInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of image info"
::= { dualImage 2 }
imageInfoEntry OBJECT-TYPE
SYNTAX ImageInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of image info"
INDEX { flashPartition }
::= { imageInfoTable 1 }
ImageInfoEntry ::= SEQUENCE {
flashPartition Integer32,
imageName DisplayString,
imageSize Integer32,
createdTime DisplayString,
imageVersion DisplayString
}
flashPartition OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The FLASH partition"
::= { imageInfoEntry 1 }
imageName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The image name"
::= { imageInfoEntry 2 }
imageSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The image size"
::= { imageInfoEntry 3 }
createdTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The FW creation time"
::= { imageInfoEntry 4}
imageVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The image version"
::= { imageInfoEntry 5}
-- maintenance.configurationManager
sourceFile OBJECT-TYPE
SYNTAX INTEGER {
running(1),
startup(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The configuration source file"
::= { configurationManager 1 }
destinationFile OBJECT-TYPE
SYNTAX INTEGER {
running(1),
startup(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The configuration destination file"
::= { configurationManager 2 }
saveConfiguration OBJECT-TYPE
SYNTAX INTEGER {
save(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Save the current configuration"
::= { configurationManager 3 }
-- maintenance.accountManager
localUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF LocalUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of local user"
::= { accountManager 1 }
localUserEntry OBJECT-TYPE
SYNTAX LocalUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of local user"
INDEX { localUserIndex }
::= { localUserTable 1 }
LocalUserEntry ::= SEQUENCE {
localUserIndex Integer32,
localUserName DisplayString,
localUserPasswordType INTEGER,
localUserPassword DisplayString,
localUserPrivilegeType INTEGER,
localUserRowStatus INTEGER
}
localUserIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index of local user"
::= { localUserEntry 1 }
localUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The user name of local user"
::= { localUserEntry 2 }
localUserPasswordType OBJECT-TYPE
SYNTAX INTEGER {
cleartext(1),
encrypted(2),
noPassword(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The pasword type of local user"
::= { localUserEntry 3 }
localUserPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The password of local user"
::= { localUserEntry 4 }
localUserPrivilegeType OBJECT-TYPE
SYNTAX INTEGER {
admin(1),
user(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The privilege type of local user"
::= { localUserEntry 5 }
localUserRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
notInService(2),
createAndWait(5),
destory(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "User can use createAndWait(5) to create new entry.
After setup the value, user use active(1) to set into switch.
User can use destory to delete(6) an entry."
::= { localUserEntry 99}
nKeyAutoMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The auto mode of N-Key."
::= { nKey 1 }
nKeyStatus OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
backup(1),
restore(2),
running(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Select N-key is idle or
backup the current configurations to N-Key or
restore N-Key's configurations to switch.
The fourth option is read-only."
::= { nKey 2 }
-- traps
trapObject OBJECT IDENTIFIER ::= { traps 1 }
ddmiAlarmDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The description of DDMI trap"
::= { trapObject 1 }
xRingMasterStatus OBJECT-TYPE
SYNTAX INTEGER {
masterToSlave(1),
slaveToMaster(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of XRing Pro Master."
::= { trapObject 2 }
ddmiAlarmWarning NOTIFICATION-TYPE
OBJECTS { ddmiAlarmDescr }
STATUS current
DESCRIPTION "The DDMI trap"
::= { traps 2 }
xRingProMasterChange NOTIFICATION-TYPE
OBJECTS { xRingMasterStatus, xRingProRingID }
STATUS current
DESCRIPTION "This trap is sent if XRing Pro master change"
::= { traps 3 }
stpStateChange NOTIFICATION-TYPE
OBJECTS { stpPortStatusIndex, stpPortStatus }
STATUS current
DESCRIPTION "This trap is sent if spanning tree port state change to blocking or forwarding"
::= { traps 5 }
END