2380 lines
60 KiB
Plaintext
2380 lines
60 KiB
Plaintext
--
|
|
--defines ALCOMA-MIB for SNMP agent extension
|
|
--Contents: Global Registration Module
|
|
-- ALCOMA OIDs - Enterprise 12140
|
|
--Version: 4.8
|
|
--Date: 31 August, 2016
|
|
--Developed By: ing.Václav VACEK
|
|
-- SW engineer
|
|
-- ALCOMA a.s.
|
|
|
|
--
|
|
--Copyright (c)2012 By ALCOMA a.s.
|
|
--
|
|
|
|
ALCOMA-MIB DEFINITIONS ::= BEGIN
|
|
|
|
|
|
IMPORTS
|
|
enterprises
|
|
FROM RFC1155-SMI
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
DisplayString
|
|
FROM RFC1213-MIB;
|
|
|
|
|
|
alcoma OBJECT IDENTIFIER ::= { enterprises 12140 }
|
|
products OBJECT IDENTIFIER ::= { alcoma 1 }
|
|
alMP OBJECT IDENTIFIER ::= { alcoma 2 }
|
|
alRADIO-RELAY-LINK OBJECT IDENTIFIER ::= { products 1 }
|
|
alNMS OBJECT IDENTIFIER ::= { products 2 }
|
|
|
|
-- Power Source MIB
|
|
-- Parameters (Prefix Par)
|
|
|
|
alStatusLED OBJECT IDENTIFIER ::= { alRADIO-RELAY-LINK 1 }
|
|
|
|
alEHW OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),error(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Hardware error."
|
|
::= { alStatusLED 1 }
|
|
|
|
alESR OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),error(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Signal error in radio."
|
|
::= { alStatusLED 2 }
|
|
|
|
alESL OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),error(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Signal error on lines."
|
|
::= { alStatusLED 3 }
|
|
|
|
alCA OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Non-standard command activate."
|
|
::= { alStatusLED 4 }
|
|
|
|
local-station OBJECT IDENTIFIER ::= { alRADIO-RELAY-LINK 2 }
|
|
|
|
alL-General OBJECT IDENTIFIER ::= { local-station 1 }
|
|
|
|
alLSupervisor OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),none(0),terminal(1),local(2),network(3),service(4),alcoma(5) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Active supervisor."
|
|
::= { alL-General 1 }
|
|
|
|
alLConfiguration OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),undefined(0),cf2xE1(1),cf4xE1(2),cf1xE2(3),cf1xE1-Ethernet(4),cf1xE3-E1(7),cf1xEthernet(8),
|
|
cf1xEthF-E1(9),
|
|
cf1xEthF-E1-1xE1(10),cf1xEthF-E1-2xE1(11),cf1xEthF-E1-3xE1(12),cf1xEthF-E1-4xE1(13),
|
|
cf1xEthF-E1-5xE1(14),cf1xEthF-E1-6xE1(15),cf1xEthF-E1-7xE1(16),cf1xEthF-E1-8xE1(17),
|
|
cf1xEthF(18),
|
|
cf1xEthF-1xE1(19),cf1xEthF-2xE1(20),cf1xEthF-3xE1(21),cf1xEthF-4xE1(22),
|
|
cf1xEthF-5xE1(23),cf1xEthF-6xE1(24),cf1xEthF-7xE1(25),cf1xEthF-8xE1(26),
|
|
cf2xFEth(27),cf2xFEth-1xE1(28),
|
|
cf4xFEth-2xE1(29),
|
|
cf2xGEth(30),cf2xGEth-SFP100(31),cf2xGEth-SFP1000(32),cf2xGEth-SFPSG(33) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "IDU configuration."
|
|
::= { alL-General 2 }
|
|
|
|
alLStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(0),ok(1),warning(2),error(3) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Station alarm status."
|
|
::= { alL-General 3 }
|
|
|
|
alLHistory OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "History alarm status."
|
|
::= { alL-General 4 }
|
|
|
|
alLIAISL OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Automatic AIS ignored."
|
|
::= { alL-General 5 }
|
|
|
|
alLILEVPWR OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Low RX or TX level alarms ignored."
|
|
::= { alL-General 6 }
|
|
|
|
|
|
|
|
alL-ODU OBJECT IDENTIFIER ::= { local-station 2 }
|
|
|
|
alLRX-Level OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Signal receiver level."
|
|
::= { alL-ODU 1 }
|
|
|
|
alLTX-PWR OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitter power level."
|
|
::= { alL-ODU 2 }
|
|
|
|
alLMode-TX OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),manual(1),atpc(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Mode of power control."
|
|
::= { alL-ODU 3 }
|
|
|
|
alLODU-LB OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "ODU line-loopback."
|
|
::= { alL-ODU 4 }
|
|
|
|
alL-Modem OBJECT IDENTIFIER ::= { local-station 3 }
|
|
|
|
alLQuality OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),out(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Quality of 4-level modulation."
|
|
::= { alL-Modem 1 }
|
|
|
|
alL-Supply OBJECT IDENTIFIER ::= { local-station 4 }
|
|
|
|
alLVoltage-5V OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),high(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Voltage 5V high."
|
|
::= { alL-Supply 1 }
|
|
|
|
alLVoltage-5Vor15V OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Voltage 5V or 15V low."
|
|
::= { alL-Supply 2 }
|
|
|
|
alLVoltage-24V OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Voltage 24V low."
|
|
::= { alL-Supply 3 }
|
|
|
|
alLCurrent-ODU OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),out(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "ODU current range."
|
|
::= { alL-Supply 4 }
|
|
|
|
alLInput OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Input voltage low."
|
|
::= { alL-Supply 5 }
|
|
|
|
alL-IDU OBJECT IDENTIFIER ::= { local-station 5 }
|
|
|
|
alLEEPROM OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),bad(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "EEPROM memory status."
|
|
::= { alL-IDU 1 }
|
|
|
|
alLRAM OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),bad(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "RAM memory status."
|
|
::= { alL-IDU 2 }
|
|
|
|
alLBattery OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "RAM backup battery voltage."
|
|
::= { alL-IDU 3 }
|
|
|
|
alLCommIDU OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),bad(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Communication status with blocks of IDU."
|
|
::= { alL-IDU 4 }
|
|
|
|
alLCommRMT OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),error(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Communication status with remote station."
|
|
::= { alL-IDU 5 }
|
|
|
|
alL-MUX OBJECT IDENTIFIER ::= { local-station 6 }
|
|
|
|
alLBER-10E6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "BER > 10E-6."
|
|
::= { alL-MUX 1 }
|
|
|
|
alLBER-10E4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "BER > 10E-4."
|
|
::= { alL-MUX 2 }
|
|
|
|
alLFrame OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),loss(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Frame LOSS."
|
|
::= { alL-MUX 3 }
|
|
|
|
alL-PDH1 OBJECT IDENTIFIER ::= { local-station 7 }
|
|
|
|
alLPDHFrame OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),loss(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "PDH1 frame LOSS."
|
|
::= { alL-PDH1 1 }
|
|
|
|
alLAISPDH OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to PDH1 frame."
|
|
::= { alL-PDH1 2 }
|
|
|
|
alLLLBPDH OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on PDH1 frame."
|
|
::= { alL-PDH1 3 }
|
|
|
|
alLRLBPDH OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on PDH1 frame."
|
|
::= { alL-PDH1 4 }
|
|
|
|
alL-Line1 OBJECT IDENTIFIER ::= { local-station 9 }
|
|
|
|
alLOSS1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 1."
|
|
::= { alL-Line1 1 }
|
|
|
|
alILOSS1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 1."
|
|
::= { alL-Line1 2 }
|
|
|
|
alAIS1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 1."
|
|
::= { alL-Line1 3 }
|
|
|
|
alAISL1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 1."
|
|
::= { alL-Line1 4 }
|
|
|
|
alLLB1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 1."
|
|
::= { alL-Line1 5 }
|
|
|
|
alRLB1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 1."
|
|
::= { alL-Line1 6 }
|
|
|
|
alL-Line2 OBJECT IDENTIFIER ::= { local-station 10 }
|
|
|
|
alLLOSS2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 2."
|
|
::= { alL-Line2 1 }
|
|
|
|
alLILOSS2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 2."
|
|
::= { alL-Line2 2 }
|
|
|
|
alLAIS2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 2."
|
|
::= { alL-Line2 3 }
|
|
|
|
alLAISL2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 2."
|
|
::= { alL-Line2 4 }
|
|
|
|
alLLLB2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 2."
|
|
::= { alL-Line2 5 }
|
|
|
|
alLRLB2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 2."
|
|
::= { alL-Line2 6 }
|
|
|
|
alL-Line3 OBJECT IDENTIFIER ::= { local-station 11 }
|
|
|
|
alLLOSS3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 3."
|
|
::= { alL-Line3 1 }
|
|
|
|
alLILOSS3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 3."
|
|
::= { alL-Line3 2 }
|
|
|
|
alLAIS3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 3."
|
|
::= { alL-Line3 3 }
|
|
|
|
alLAISL3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 3."
|
|
::= { alL-Line3 4 }
|
|
|
|
alLLLB3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 3."
|
|
::= { alL-Line3 5 }
|
|
|
|
alLRLB3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 3."
|
|
::= { alL-Line3 6 }
|
|
|
|
alL-Line4 OBJECT IDENTIFIER ::= { local-station 12 }
|
|
|
|
alLLOSS4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 4."
|
|
::= { alL-Line4 1 }
|
|
|
|
alLILOSS4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 4."
|
|
::= { alL-Line4 2 }
|
|
|
|
alLAIS4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 4."
|
|
::= { alL-Line4 3 }
|
|
|
|
alLAISL4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 4."
|
|
::= { alL-Line4 4 }
|
|
|
|
alLLLB4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 4."
|
|
::= { alL-Line4 5 }
|
|
|
|
alLRLB4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 4."
|
|
::= { alL-Line4 6 }
|
|
|
|
alL-Line5 OBJECT IDENTIFIER ::= { local-station 13 }
|
|
|
|
alLLOSS5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 5."
|
|
::= { alL-Line5 1 }
|
|
|
|
alLILOSS5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 5."
|
|
::= { alL-Line5 2 }
|
|
|
|
alLAIS5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 5."
|
|
::= { alL-Line5 3 }
|
|
|
|
alLAISL5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 5."
|
|
::= { alL-Line5 4 }
|
|
|
|
alLLLB5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 5."
|
|
::= { alL-Line5 5 }
|
|
|
|
alLRLB5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 5."
|
|
::= { alL-Line5 6 }
|
|
|
|
alL-Line6 OBJECT IDENTIFIER ::= { local-station 14 }
|
|
|
|
alLLOSS6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 6."
|
|
::= { alL-Line6 1 }
|
|
|
|
alLILOSS6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 6."
|
|
::= { alL-Line6 2 }
|
|
|
|
alLAIS6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 6."
|
|
::= { alL-Line6 3 }
|
|
|
|
alLAISL6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 6."
|
|
::= { alL-Line6 4 }
|
|
|
|
alLLLB6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 6."
|
|
::= { alL-Line6 5 }
|
|
|
|
alLRLB6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 6."
|
|
::= { alL-Line6 6 }
|
|
|
|
alL-Line7 OBJECT IDENTIFIER ::= { local-station 15 }
|
|
|
|
alLLOSS7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 7."
|
|
::= { alL-Line7 1 }
|
|
|
|
alLILOSS7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 7."
|
|
::= { alL-Line7 2 }
|
|
|
|
alLAIS7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 7."
|
|
::= { alL-Line7 3 }
|
|
|
|
alLAISL7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 7."
|
|
::= { alL-Line7 4 }
|
|
|
|
alLLLB7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 7."
|
|
::= { alL-Line7 5 }
|
|
|
|
alLRLB7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 7."
|
|
::= { alL-Line7 6 }
|
|
|
|
alL-Line8 OBJECT IDENTIFIER ::= { local-station 16 }
|
|
|
|
alLLOSS8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 8."
|
|
::= { alL-Line8 1 }
|
|
|
|
alLILOSS8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 8."
|
|
::= { alL-Line8 2 }
|
|
|
|
alLAIS8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 8."
|
|
::= { alL-Line8 3 }
|
|
|
|
alLAISL8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 8."
|
|
::= { alL-Line8 4 }
|
|
|
|
alLLLB8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 8."
|
|
::= { alL-Line8 5 }
|
|
|
|
alLRLB8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 8."
|
|
::= { alL-Line8 6 }
|
|
|
|
alL-Line9 OBJECT IDENTIFIER ::= { local-station 17 }
|
|
|
|
alLLOSS9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 9."
|
|
::= { alL-Line9 1 }
|
|
|
|
alLILOSS9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 9."
|
|
::= { alL-Line9 2 }
|
|
|
|
alLAIS9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 9."
|
|
::= { alL-Line9 3 }
|
|
|
|
alLAISL9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 9."
|
|
::= { alL-Line9 4 }
|
|
|
|
alLLLB9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 9."
|
|
::= { alL-Line9 5 }
|
|
|
|
alLRLB9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 9."
|
|
::= { alL-Line9 6 }
|
|
|
|
alL-Line10 OBJECT IDENTIFIER ::= { local-station 18 }
|
|
|
|
alLLOSS10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 10."
|
|
::= { alL-Line10 1 }
|
|
|
|
alLILOSS10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 10."
|
|
::= { alL-Line10 2 }
|
|
|
|
alLAIS10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 10."
|
|
::= { alL-Line10 3 }
|
|
|
|
alLAISL10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 10."
|
|
::= { alL-Line10 4 }
|
|
|
|
alLLLB10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 10."
|
|
::= { alL-Line10 5 }
|
|
|
|
alLRLB10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 10."
|
|
::= { alL-Line10 6 }
|
|
|
|
alL-Line11 OBJECT IDENTIFIER ::= { local-station 19 }
|
|
|
|
alLLOSS11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 11."
|
|
::= { alL-Line11 1 }
|
|
|
|
alLILOSS11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 11."
|
|
::= { alL-Line11 2 }
|
|
|
|
alLAIS11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 11."
|
|
::= { alL-Line11 3 }
|
|
|
|
alLAISL11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 11."
|
|
::= { alL-Line11 4 }
|
|
|
|
alLLLB11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 11."
|
|
::= { alL-Line11 5 }
|
|
|
|
alLRLB11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 11."
|
|
::= { alL-Line11 6 }
|
|
|
|
alL-Line12 OBJECT IDENTIFIER ::= { local-station 20 }
|
|
|
|
alLLOSS12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 12."
|
|
::= { alL-Line12 1 }
|
|
|
|
alLILOSS12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 12."
|
|
::= { alL-Line12 2 }
|
|
|
|
alLAIS12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 12."
|
|
::= { alL-Line12 3 }
|
|
|
|
alLAISL12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 12."
|
|
::= { alL-Line12 4 }
|
|
|
|
alLLLB12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 12."
|
|
::= { alL-Line12 5 }
|
|
|
|
alLRLB12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 12."
|
|
::= { alL-Line12 6 }
|
|
|
|
remote-station OBJECT IDENTIFIER ::= { alRADIO-RELAY-LINK 3 }
|
|
|
|
alR-General OBJECT IDENTIFIER ::= { remote-station 1 }
|
|
|
|
alRSupervisor OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),none(0),terminal(1),local(2),network(3),service(4),alcoma(5) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Active supervisor."
|
|
::= { alR-General 1 }
|
|
|
|
alRConfiguration OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),undefined(0),cf2xE1(1),cf4xE1(2),cf1xE2(3),cf1xE1-Ethernet(4),cf1xE3-E1(7),cf1xEthernet(8),
|
|
cf1xEthF-E1(9),
|
|
cf1xEthF-E1-1xE1(10),cf1xEthF-E1-2xE1(11),cf1xEthF-E1-3xE1(12),cf1xEthF-E1-4xE1(13),
|
|
cf1xEthF-E1-5xE1(14),cf1xEthF-E1-6xE1(15),cf1xEthF-E1-7xE1(16),cf1xEthF-E1-8xE1(17),
|
|
cf1xEthF(18),
|
|
cf1xEthF-1xE1(19),cf1xEthF-2xE1(20),cf1xEthF-3xE1(21),cf1xEthF-4xE1(22),
|
|
cf1xEthF-5xE1(23),cf1xEthF-6xE1(24),cf1xEthF-7xE1(25),cf1xEthF-8xE1(26),
|
|
cf2xFEth(27),cf2xFEth-1xE1(28),
|
|
cf4xFEth-2xE1(29),
|
|
cf2xGEth(30),cf2xGEth-SFP100(31),cf2xGEth-SFP1000(32),cf2xGEth-SFPSG(33) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "IDU configuration."
|
|
::= { alR-General 2 }
|
|
|
|
alRStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(0),ok(1),warning(2),error(3) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Station alarm status."
|
|
::= { alR-General 3 }
|
|
|
|
alRHistory OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "History alarm status."
|
|
::= { alR-General 4 }
|
|
|
|
alRIAISL OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Automatic AIS ignored."
|
|
::= { alR-General 5 }
|
|
|
|
alRILEVPWR OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Low RX or TX level alarms ignored."
|
|
::= { alR-General 6 }
|
|
|
|
alR-ODU OBJECT IDENTIFIER ::= { remote-station 2 }
|
|
|
|
alRRX-Level OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Signal receiver level."
|
|
::= { alR-ODU 1 }
|
|
|
|
alRTX-PWR OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitter power level."
|
|
::= { alR-ODU 2 }
|
|
|
|
alRMode-TX OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),manual(1),atpc(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Mode of power control."
|
|
::= { alR-ODU 3 }
|
|
|
|
alRODU-LB OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "ODU line-loopback."
|
|
::= { alR-ODU 4 }
|
|
|
|
alR-Modem OBJECT IDENTIFIER ::= { remote-station 3 }
|
|
|
|
alRQuality OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),out(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Quality of 4-level modulation."
|
|
::= { alR-Modem 1 }
|
|
|
|
alR-Supply OBJECT IDENTIFIER ::= { remote-station 4 }
|
|
|
|
alRVoltage-5V OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),high(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Voltage 5V high."
|
|
::= { alR-Supply 1 }
|
|
|
|
alRVoltage-5Vor15V OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Voltage 5V or 15V low."
|
|
::= { alR-Supply 2 }
|
|
|
|
alRVoltage-24V OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Voltage 24V low."
|
|
::= { alR-Supply 3 }
|
|
|
|
alRCurrent-ODU OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),out(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "ODU current range."
|
|
::= { alR-Supply 4 }
|
|
|
|
alRInput OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Input voltage low."
|
|
::= { alR-Supply 5 }
|
|
|
|
alR-IDU OBJECT IDENTIFIER ::= { remote-station 5 }
|
|
|
|
alREEPROM OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),bad(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "EEPROM memory status."
|
|
::= { alR-IDU 1 }
|
|
|
|
alRRAM OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),bad(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "RAM memory status."
|
|
::= { alR-IDU 2 }
|
|
|
|
alRBattery OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "RAM backup battery voltage."
|
|
::= { alR-IDU 3 }
|
|
|
|
alRCommIDU OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),bad(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Communication status with blocks of IDU."
|
|
::= { alR-IDU 4 }
|
|
|
|
alRCommRMT OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),error(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Communication status with remote station."
|
|
::= { alR-IDU 5 }
|
|
|
|
alR-MUX OBJECT IDENTIFIER ::= { remote-station 6 }
|
|
|
|
alRBER-10E6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "BER > 10E-6."
|
|
::= { alR-MUX 1 }
|
|
|
|
alRBER-10E4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "BER > 10E-4."
|
|
::= { alR-MUX 2 }
|
|
|
|
alRFrame OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),loss(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Frame LOSS."
|
|
::= { alR-MUX 3 }
|
|
|
|
alR-PDH1 OBJECT IDENTIFIER ::= { remote-station 7 }
|
|
|
|
alRPDHFrame OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),loss(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "PDH1 frame LOSS."
|
|
::= { alR-PDH1 1 }
|
|
|
|
alRAISPDH OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to frame PDH1."
|
|
::= { alR-PDH1 2 }
|
|
|
|
alRLLBPDH OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on PDH1 frame."
|
|
::= { alR-PDH1 3 }
|
|
|
|
alRRLBPDH OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on PDH1 frame."
|
|
::= { alR-PDH1 4 }
|
|
|
|
alR-Line1 OBJECT IDENTIFIER ::= { remote-station 9 }
|
|
|
|
alRLOSS1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 1."
|
|
::= { alR-Line1 1 }
|
|
|
|
alRILOSS1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 1."
|
|
::= { alR-Line1 2 }
|
|
|
|
alRAIS1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 1."
|
|
::= { alR-Line1 3 }
|
|
|
|
alRAISL1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 1."
|
|
::= { alR-Line1 4 }
|
|
|
|
alRLLB1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 1."
|
|
::= { alR-Line1 5 }
|
|
|
|
alRRLB1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 1."
|
|
::= { alR-Line1 6 }
|
|
|
|
alR-Line2 OBJECT IDENTIFIER ::= { remote-station 10 }
|
|
|
|
alRLOSS2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 2."
|
|
::= { alR-Line2 1 }
|
|
|
|
alRILOSS2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 2."
|
|
::= { alR-Line2 2 }
|
|
|
|
alRAIS2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 2."
|
|
::= { alR-Line2 3 }
|
|
|
|
alRAISL2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 2."
|
|
::= { alR-Line2 4 }
|
|
|
|
alRLLB2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 2."
|
|
::= { alR-Line2 5 }
|
|
|
|
alRRLB2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 2."
|
|
::= { alR-Line2 6 }
|
|
|
|
alR-Line3 OBJECT IDENTIFIER ::= { remote-station 11 }
|
|
|
|
alRLOSS3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 3."
|
|
::= { alR-Line3 1 }
|
|
|
|
alRILOSS3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 3."
|
|
::= { alR-Line3 2 }
|
|
|
|
alRAIS3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 3."
|
|
::= { alR-Line3 3 }
|
|
|
|
alRAISL3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 3."
|
|
::= { alR-Line3 4 }
|
|
|
|
alRLLB3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 3."
|
|
::= { alR-Line3 5 }
|
|
|
|
alRRLB3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 3."
|
|
::= { alR-Line3 6 }
|
|
|
|
alR-Line4 OBJECT IDENTIFIER ::= { remote-station 12 }
|
|
|
|
alRLOSS4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 4."
|
|
::= { alR-Line4 1 }
|
|
|
|
alRILOSS4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 4."
|
|
::= { alR-Line4 2 }
|
|
|
|
alRAIS4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 4."
|
|
::= { alR-Line4 3 }
|
|
|
|
alRAISL4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 4."
|
|
::= { alR-Line4 4 }
|
|
|
|
alRLLB4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 4."
|
|
::= { alR-Line4 5 }
|
|
|
|
alRRLB4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 4."
|
|
::= { alR-Line4 6 }
|
|
|
|
alR-Line5 OBJECT IDENTIFIER ::= { remote-station 13 }
|
|
|
|
alRLOSS5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 5."
|
|
::= { alR-Line5 1 }
|
|
|
|
alRILOSS5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 5."
|
|
::= { alR-Line5 2 }
|
|
|
|
alRAIS5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 5."
|
|
::= { alR-Line5 3 }
|
|
|
|
alRAISL5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 5."
|
|
::= { alR-Line5 4 }
|
|
|
|
alRLLB5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 5."
|
|
::= { alR-Line5 5 }
|
|
|
|
alRRLB5 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 5."
|
|
::= { alR-Line5 6 }
|
|
|
|
alR-Line6 OBJECT IDENTIFIER ::= { remote-station 14 }
|
|
|
|
alRLOSS6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 6."
|
|
::= { alR-Line6 1 }
|
|
|
|
alRILOSS6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 6."
|
|
::= { alR-Line6 2 }
|
|
|
|
alRAIS6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 6."
|
|
::= { alR-Line6 3 }
|
|
|
|
alRAISL6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 6."
|
|
::= { alR-Line6 4 }
|
|
|
|
alRLLB6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 6."
|
|
::= { alR-Line6 5 }
|
|
|
|
alRRLB6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 6."
|
|
::= { alR-Line6 6 }
|
|
|
|
alR-Line7 OBJECT IDENTIFIER ::= { remote-station 15 }
|
|
|
|
alRLOSS7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 7."
|
|
::= { alR-Line7 1 }
|
|
|
|
alRILOSS7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 7."
|
|
::= { alR-Line7 2 }
|
|
|
|
alRAIS7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 7."
|
|
::= { alR-Line7 3 }
|
|
|
|
alRAISL7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 7."
|
|
::= { alR-Line7 4 }
|
|
|
|
alRLLB7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 7."
|
|
::= { alR-Line7 5 }
|
|
|
|
alRRLB7 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 7."
|
|
::= { alR-Line7 6 }
|
|
|
|
alR-Line8 OBJECT IDENTIFIER ::= { remote-station 16 }
|
|
|
|
alRLOSS8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 8."
|
|
::= { alR-Line8 1 }
|
|
|
|
alRILOSS8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 8."
|
|
::= { alR-Line8 2 }
|
|
|
|
alRAIS8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 8."
|
|
::= { alR-Line8 3 }
|
|
|
|
alRAISL8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 8."
|
|
::= { alR-Line8 4 }
|
|
|
|
alRLLB8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 8."
|
|
::= { alR-Line8 5 }
|
|
|
|
alRRLB8 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 8."
|
|
::= { alR-Line8 6 }
|
|
|
|
alR-Line9 OBJECT IDENTIFIER ::= { remote-station 17 }
|
|
|
|
alRLOSS9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 9."
|
|
::= { alR-Line9 1 }
|
|
|
|
alRILOSS9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 9."
|
|
::= { alR-Line9 2 }
|
|
|
|
alRAIS9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 9."
|
|
::= { alR-Line9 3 }
|
|
|
|
alRAISL9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 9."
|
|
::= { alR-Line9 4 }
|
|
|
|
alRLLB9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 9."
|
|
::= { alR-Line9 5 }
|
|
|
|
alRRLB9 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 9."
|
|
::= { alR-Line9 6 }
|
|
|
|
alR-Line10 OBJECT IDENTIFIER ::= { remote-station 18 }
|
|
|
|
alRLOSS10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 10."
|
|
::= { alR-Line10 1 }
|
|
|
|
alRILOSS10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 10."
|
|
::= { alR-Line10 2 }
|
|
|
|
alRAIS10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 10."
|
|
::= { alR-Line10 3 }
|
|
|
|
alRAISL10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 10."
|
|
::= { alR-Line10 4 }
|
|
|
|
alRLLB10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 10."
|
|
::= { alR-Line10 5 }
|
|
|
|
alRRLB10 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 10."
|
|
::= { alR-Line10 6 }
|
|
|
|
alR-Line11 OBJECT IDENTIFIER ::= { remote-station 19 }
|
|
|
|
alRLOSS11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 11."
|
|
::= { alR-Line11 1 }
|
|
|
|
alRILOSS11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 11."
|
|
::= { alR-Line11 2 }
|
|
|
|
alRAIS11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 11."
|
|
::= { alR-Line11 3 }
|
|
|
|
alRAISL11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 11."
|
|
::= { alR-Line11 4 }
|
|
|
|
alRLLB11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 11."
|
|
::= { alR-Line11 5 }
|
|
|
|
alRRLB11 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 11."
|
|
::= { alR-Line11 6 }
|
|
|
|
alR-Line12 OBJECT IDENTIFIER ::= { remote-station 20 }
|
|
|
|
alRLOSS12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 12."
|
|
::= { alR-Line12 1 }
|
|
|
|
alRILOSS12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 12."
|
|
::= { alR-Line12 2 }
|
|
|
|
alRAIS12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 12."
|
|
::= { alR-Line12 3 }
|
|
|
|
alRAISL12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 12."
|
|
::= { alR-Line12 4 }
|
|
|
|
alRLLB12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 12."
|
|
::= { alR-Line12 5 }
|
|
|
|
alRRLB12 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 12."
|
|
::= { alR-Line12 6 }
|
|
|
|
alRRLTrap OBJECT IDENTIFIER ::= { alRADIO-RELAY-LINK 4 }
|
|
|
|
alLast-Message OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Message giving more detailed information on change of alarms status."
|
|
::= { alRRLTrap 1 }
|
|
|
|
traps OBJECT IDENTIFIER ::= { alcoma 0 }
|
|
|
|
generalOFF OBJECT IDENTIFIER ::= { traps 1 }
|
|
generalOK OBJECT IDENTIFIER ::= { traps 2 }
|
|
generalWAR OBJECT IDENTIFIER ::= { traps 3 }
|
|
generalERR OBJECT IDENTIFIER ::= { traps 4 }
|
|
receiverLowAlarmOn OBJECT IDENTIFIER ::= { traps 5 }
|
|
receiverLowAlarmOff OBJECT IDENTIFIER ::= { traps 6 }
|
|
transmitterLowAlarmOn OBJECT IDENTIFIER ::= { traps 7 }
|
|
transmitterLowAlarmOff OBJECT IDENTIFIER ::= { traps 8 }
|
|
signalQualityAlarmOn OBJECT IDENTIFIER ::= { traps 9 }
|
|
signalQualityAlarmOff OBJECT IDENTIFIER ::= { traps 10 }
|
|
ber6EAlarmOn OBJECT IDENTIFIER ::= { traps 11 }
|
|
ber6EAlarmOff OBJECT IDENTIFIER ::= { traps 12 }
|
|
ber4EAlarmOn OBJECT IDENTIFIER ::= { traps 13 }
|
|
ber4EAlarmOff OBJECT IDENTIFIER ::= { traps 14 }
|
|
inputSupplyAlarmOn OBJECT IDENTIFIER ::= { traps 15 }
|
|
inputSupplyAlarmOff OBJECT IDENTIFIER ::= { traps 16 }
|
|
aisFromLineAlarmOn OBJECT IDENTIFIER ::= { traps 17 }
|
|
aisFromLineAlarmOff OBJECT IDENTIFIER ::= { traps 18 }
|
|
aisToLineAlarmOn OBJECT IDENTIFIER ::= { traps 19 }
|
|
aisToLineAlarmOff OBJECT IDENTIFIER ::= { traps 20 }
|
|
aisToPdhAlarmOn OBJECT IDENTIFIER ::= { traps 21 }
|
|
aisToPdhAlarmOff OBJECT IDENTIFIER ::= { traps 22 }
|
|
lossAtLineAlarmOn OBJECT IDENTIFIER ::= { traps 23 }
|
|
lossAtLineAlarmOff OBJECT IDENTIFIER ::= { traps 24 }
|
|
lossAtPdhAlarmOn OBJECT IDENTIFIER ::= { traps 25 }
|
|
lossAtPdhAlarmOff OBJECT IDENTIFIER ::= { traps 26 }
|
|
lossAtFrameAlarmOn OBJECT IDENTIFIER ::= { traps 27 }
|
|
lossAtFrameAlarmOff OBJECT IDENTIFIER ::= { traps 28 }
|
|
|
|
trapParam OBJECT IDENTIFIER ::= { alNMS 1 }
|
|
|
|
nmsTrapTime OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Time of alarms scan."
|
|
::= { trapParam 1 }
|
|
|
|
trapSequence OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Number of trap sequence."
|
|
::= { trapParam 2 }
|
|
|
|
mwRouteID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Identification of microwave route."
|
|
::= { trapParam 3 }
|
|
|
|
stationID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Identification of Radio Relay Link station."
|
|
::= { trapParam 4 }
|
|
|
|
stationName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Name of Radio Relay Link station."
|
|
::= { trapParam 5 }
|
|
|
|
mgmtGWaddr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "IP address of Management Gateway."
|
|
::= { trapParam 6 }
|
|
|
|
lineID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line ID number."
|
|
::= { trapParam 7 }
|
|
|
|
-- MIB pro spoje rady MPx
|
|
|
|
alMPStatusLED OBJECT IDENTIFIER ::= { alMP 1 }
|
|
|
|
alMPEHW OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),error(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Hardware error."
|
|
::= { alMPStatusLED 1 }
|
|
|
|
alMPESR OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),error(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Signal error in radio."
|
|
::= { alMPStatusLED 2 }
|
|
|
|
alMPESL OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),error(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Signal error on lines."
|
|
::= { alMPStatusLED 3 }
|
|
|
|
alMPCA OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Non-standard command activate."
|
|
::= { alMPStatusLED 4 }
|
|
|
|
alMPGeneral OBJECT IDENTIFIER ::= { alMP 2 }
|
|
|
|
alMPSupervisor OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),none(0),terminal(1),local(2),network(3),service(4),alcoma(5) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Active supervisor."
|
|
::= { alMPGeneral 1 }
|
|
|
|
alMPConfiguration OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),undefined(0),cf2xE1(1),cf4xE1(2),cf1xE2(3),cf1xE1-Ethernet(4),cf1xE3-E1(7),cf1xEthernet(8),
|
|
cf1xEthF-E1(9),
|
|
cf1xEthF-E1-1xE1(10),cf1xEthF-E1-2xE1(11),cf1xEthF-E1-3xE1(12),cf1xEthF-E1-4xE1(13),
|
|
cf1xEthF-E1-5xE1(14),cf1xEthF-E1-6xE1(15),cf1xEthF-E1-7xE1(16),cf1xEthF-E1-8xE1(17),
|
|
cf1xEthF(18),
|
|
cf1xEthF-1xE1(19),cf1xEthF-2xE1(20),cf1xEthF-3xE1(21),cf1xEthF-4xE1(22),
|
|
cf1xEthF-5xE1(23),cf1xEthF-6xE1(24),cf1xEthF-7xE1(25),cf1xEthF-8xE1(26),
|
|
cf2xFEth(27),cf2xFEth-1xE1(28),
|
|
cf4xFEth-2xE1(29),
|
|
cf2xGEth(30),cf2xGEth-SFP100(31),cf2xGEth-SFP1000(32),cf2xGEth-SFPSG(33) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "IDU configuration."
|
|
::= { alMPGeneral 2 }
|
|
|
|
alMPStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(0),ok(1),warning(2),error(3) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Station alarm status."
|
|
::= { alMPGeneral 3 }
|
|
|
|
alMPHistory OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "History alarm status."
|
|
::= { alMPGeneral 4 }
|
|
|
|
alMPIAISL OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Automatic AIS ignored."
|
|
::= { alMPGeneral 5 }
|
|
|
|
alMPILEVPWR OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Low RX or TX level alarms ignored."
|
|
::= { alMPGeneral 6 }
|
|
|
|
alMPExpiration OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..100))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Expiration status."
|
|
::= { alMPGeneral 7 }
|
|
|
|
alMPDevType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..100))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Device type."
|
|
::= { alMPGeneral 8 }
|
|
|
|
alMPModel OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..100))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Terminal model."
|
|
::= { alMPGeneral 9 }
|
|
|
|
alMPVersionSW OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..100))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Firmware version."
|
|
::= { alMPGeneral 10 }
|
|
|
|
alMPODU OBJECT IDENTIFIER ::= { alMP 3 }
|
|
|
|
alMPTuneTX OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitter frequency [MHz]."
|
|
::= { alMPODU 1 }
|
|
|
|
alMPTuneRX OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Receiver frequency [MHz]."
|
|
::= { alMPODU 2 }
|
|
|
|
alMPTX-PWR OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-128) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitter power level [dB]."
|
|
::= { alMPODU 3 }
|
|
|
|
alMPRX-Level OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-128) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Signal receiver level [dB]."
|
|
::= { alMPODU 4 }
|
|
|
|
alMPTX-PWRAlrm OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),out(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Alarm transmitter power level."
|
|
::= { alMPODU 5 }
|
|
|
|
alMPRX-LevelAlrm OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Alarm signal receiver level."
|
|
::= { alMPODU 6 }
|
|
|
|
alMPMode-TX OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),manual(1),atpc(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Mode of power control."
|
|
::= { alMPODU 7 }
|
|
|
|
alMPODU-LB OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "ODU line-loopback."
|
|
::= { alMPODU 8 }
|
|
|
|
alMPTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Temperature ODU."
|
|
::= { alMPODU 9 }
|
|
|
|
alMPVerSwMW OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..50))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "MW Circuits version."
|
|
::= { alMPODU 10 }
|
|
|
|
alMPSerNumMW OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..50))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "MW Serial Number."
|
|
::= { alMPODU 11 }
|
|
|
|
alMPTypeODU OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),oduA(0),oduB(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Type of ODU."
|
|
::= { alMPODU 12 }
|
|
|
|
alMPPTX OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Set power of transmitter."
|
|
::= { alMPODU 13 }
|
|
|
|
alMPModem OBJECT IDENTIFIER ::= { alMP 4 }
|
|
|
|
alMPQuality OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Quality of signal."
|
|
::= { alMPModem 1 }
|
|
|
|
alMPSNR OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Signal noise ratio."
|
|
::= { alMPModem 2 }
|
|
|
|
alMPQualityAlrm OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),out(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Alarm quality of signal."
|
|
::= { alMPModem 3 }
|
|
|
|
alMPSNRAlrm OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Alarm signal noise ratio."
|
|
::= { alMPModem 4 }
|
|
|
|
alMPRate OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ndef(0),r300Mbps(1),r200Mbps(2),r16Mbps1(3),r282Mbps(4),r40Mbps1(5),r20Mbps1(6),r10Mbps1(7),r5Mbps1(8),r179Mbps(9),r230Mbps(10),
|
|
r14Mbps(11),r32Mbps2(12),r44Mbps(13),r22Mbps(14),r11Mbps(15),r5Mbps(16),r66Mbps(17),r33Mbps(18),
|
|
r16Mbps(19),r8Mbps(20),r80Mbps(21),r333Mbps(22),r355Mbps(23),r384Mbps(24),r50Mbps(25),r72Mbps(26),
|
|
r100Mbps(27),r123Mbps(28),r158Mbps(29),r168Mbps(30),r77Mbps(31),r35Mbps(32),r25Mbps(33),r165Mbps(34),
|
|
r61Mbps(35),r39Mbps(36),r19Mbps(37),r17Mbps(38),r30Mbps(39),r34Mbps(40),r60Mbps(41),r178Mbps(42),
|
|
r186Mbps(43),r1250Mbps(44),r70Mbps(45),r58Mbps(46),r116Mbps(47),r149Mbps(48),r183Mbps(49),
|
|
r216Mbps(50),r249Mbps(51),r31Mbps(52),r41Mbps(53),r59Mbps(54),r64Mbps(55),r69Mbps(56),
|
|
r83Mbps(57),r102Mbps(58),r119Mbps(59),r127Mbps(60),r137Mbps(61),r89Mbps(62) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmision rate of link."
|
|
::= { alMPModem 5 }
|
|
|
|
alMPQAM OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ndef(0),mp4FSK(1),mpQPSK(2),mp4QAM1(3),mp8QAM(4),mp16QAM1(5),mp4QAM2(6),mp16QAM2(7),mp32QAM(8),mp64QAM(9),mp128QAM(10),mp256QAM(11) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Low transnission rate of link."
|
|
::= { alMPModem 6 }
|
|
|
|
alMPActiveACM OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Activation ACM."
|
|
::= { alMPModem 7 }
|
|
|
|
alMPStatusACM OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),normal(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Actual ACM status."
|
|
::= { alMPModem 8 }
|
|
|
|
alMPBW OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ndef(0),
|
|
bw3-5MHz(1),bw5MHz(2),bw7MHz(3),bw7-5MHz(4),bw10MHz(5),bw13-75MHz(6),bw14MHz(7),bw20MHz(8),bw20MHzETSI(9),bw27-5MHz(10),
|
|
bw28MHz(11),bw28MHzACAP(12),bw30MHz(13),bw40MHz(14),bw50MHz(15),bw55MHz(16),bw56MHz(17),bw56ACAPMHz(18),bw80MHz(19),bw110MHz(20),
|
|
bw112MHz(21) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Actual bandwidth."
|
|
::= { alMPModem 9 }
|
|
|
|
alMPMaxRate OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ndef(0),r300Mbps(1),r200Mbps(2),r16Mbps1(3),r282Mbps(4),r40Mbps1(5),r20Mbps1(6),r10Mbps1(7),r5Mbps1(8),r179Mbps(9),r230Mbps(10),
|
|
r14Mbps(11),r32Mbps2(12),r44Mbps(13),r22Mbps(14),r11Mbps(15),r5Mbps(16),r66Mbps(17),r33Mbps(18),
|
|
r16Mbps(19),r8Mbps(20),r80Mbps(21),r333Mbps(22),r355Mbps(23),r384Mbps(24),r50Mbps(25),r72Mbps(26),
|
|
r100Mbps(27),r123Mbps(28),r158Mbps(29),r168Mbps(30),r77Mbps(31),r35Mbps(32),r25Mbps(33),r165Mbps(34),
|
|
r61Mbps(35),r39Mbps(36),r19Mbps(37),r17Mbps(38),r30Mbps(39),r34Mbps(40),r60Mbps(41),r178Mbps(42),
|
|
r186Mbps(43),r1250Mbps(44),r70Mbps(45),r58Mbps(46),r116Mbps(47),r149Mbps(48),r183Mbps(49),
|
|
r216Mbps(50),r249Mbps(51),r31Mbps(52),r41Mbps(53),r59Mbps(54),r64Mbps(55),r69Mbps(56),
|
|
r83Mbps(57),r102Mbps(58),r119Mbps(59),r127Mbps(60),r137Mbps(61),r89Mbps(62) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Maximal Transmision rate of link."
|
|
::= { alMPModem 10 }
|
|
|
|
alMPSupply OBJECT IDENTIFIER ::= { alMP 5 }
|
|
|
|
alMPInput OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),low(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Input voltage low."
|
|
::= { alMPSupply 1 }
|
|
|
|
alMPRDG OBJECT IDENTIFIER ::= { alMP 6 }
|
|
|
|
alMPEEPROM OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),bad(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "EEPROM memory status."
|
|
::= { alMPRDG 1 }
|
|
|
|
alMPRAM OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),bad(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "RAM memory status."
|
|
::= { alMPRDG 2 }
|
|
|
|
alMPCommRMT OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),error(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Communication status with remote station."
|
|
::= { alMPRDG 3 }
|
|
|
|
alMPMUX OBJECT IDENTIFIER ::= { alMP 7 }
|
|
|
|
alMPBER OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..30))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Value of BER."
|
|
::= { alMPMUX 1 }
|
|
|
|
alMPBER-10E6 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "BER > 10E-6."
|
|
::= { alMPMUX 2 }
|
|
|
|
alMPBER-10E4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),no(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "BER > 10E-4."
|
|
::= { alMPMUX 3 }
|
|
|
|
alMPFrame OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),ok(0),loss(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Frame LOSS."
|
|
::= { alMPMUX 4 }
|
|
|
|
alMPLine1 OBJECT IDENTIFIER ::= { alMP 8 }
|
|
|
|
alMPLOSS1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 1."
|
|
::= { alMPLine1 1 }
|
|
|
|
alMPILOSS1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 1."
|
|
::= { alMPLine1 2 }
|
|
|
|
alMPAIS1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS to line 1."
|
|
::= { alMPLine1 3 }
|
|
|
|
alMPAISL1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "AIS from line 1."
|
|
::= { alMPLine1 4 }
|
|
|
|
alMPLLB1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line loopback on line 1."
|
|
::= { alMPLine1 5 }
|
|
|
|
alMPRLB1 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Radio loopback on line 1."
|
|
::= { alMPLine1 6 }
|
|
|
|
alMPLine2 OBJECT IDENTIFIER ::= { alMP 9 }
|
|
|
|
alMPLOSS2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 2."
|
|
::= { alMPLine2 1 }
|
|
|
|
alMPILOSS2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 2."
|
|
::= { alMPLine2 2 }
|
|
|
|
alMPLink2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),down(0),up(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Link status line 2."
|
|
::= { alMPLine2 3 }
|
|
|
|
alMPSpeed2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),e10Mbps(0),e100Mbps(1),e1000Mbps(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Speed of line 2."
|
|
::= { alMPLine2 4 }
|
|
|
|
alMPType2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),halfduplex(0),fullduplex(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Communication type of line 2."
|
|
::= { alMPLine2 5 }
|
|
|
|
alMPFlow2 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Flow control of line 2."
|
|
::= { alMPLine2 6 }
|
|
|
|
alMPPktRX2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Received packets count of line 2."
|
|
::= { alMPLine2 7 }
|
|
|
|
alMPByteRX2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Received bytes count of line 2."
|
|
::= { alMPLine2 8 }
|
|
|
|
alMPPktTX2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitted packets count of line 2."
|
|
::= { alMPLine2 9 }
|
|
|
|
alMPByteTX2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitted bytes count of line 2."
|
|
::= { alMPLine2 10 }
|
|
|
|
alMPError2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Error count of line 2."
|
|
::= { alMPLine2 11 }
|
|
|
|
alMPCollision2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Collision count of line 2."
|
|
::= { alMPLine2 12 }
|
|
|
|
alMPPauseIn2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Input Pause count of line 2."
|
|
::= { alMPLine2 13 }
|
|
|
|
alMPPauseOut2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Output Pause count of line 2."
|
|
::= { alMPLine2 14 }
|
|
|
|
alMPDiscardsIn2 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Input Discards pactets count of line 2."
|
|
::= { alMPLine2 15 }
|
|
|
|
alMPLine3 OBJECT IDENTIFIER ::= { alMP 10 }
|
|
|
|
alMPLOSS3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 3."
|
|
::= { alMPLine3 1 }
|
|
|
|
alMPILOSS3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 3."
|
|
::= { alMPLine3 2 }
|
|
|
|
alMPLink3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),down(0),up(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Link status line 3."
|
|
::= { alMPLine3 3 }
|
|
|
|
alMPSpeed3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),e10Mbps(0),e100Mbps(1),e1000Mbps(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Speed of line 3."
|
|
::= { alMPLine3 4 }
|
|
|
|
alMPType3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),halfduplex(0),fullduplex(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Communication type of line 3."
|
|
::= { alMPLine3 5 }
|
|
|
|
alMPFlow3 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Flow control of line 3."
|
|
::= { alMPLine3 6 }
|
|
|
|
alMPPktRX3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Received packets count of line 3."
|
|
::= { alMPLine3 7 }
|
|
|
|
alMPByteRX3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Received bytes count of line 3."
|
|
::= { alMPLine3 8 }
|
|
|
|
alMPPktTX3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitted packets count of line 3."
|
|
::= { alMPLine3 9 }
|
|
|
|
alMPByteTX3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitted bytes count of line 3."
|
|
::= { alMPLine3 10 }
|
|
|
|
alMPError3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Error count of line 3."
|
|
::= { alMPLine3 11 }
|
|
|
|
alMPCollision3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Collision count of line 3."
|
|
::= { alMPLine3 12 }
|
|
|
|
alMPPauseIn3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Input Pause count of line 3."
|
|
::= { alMPLine3 13 }
|
|
|
|
alMPPauseOut3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Output Pause count of line 3."
|
|
::= { alMPLine3 14 }
|
|
|
|
alMPDiscardsIn3 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Input Discards pactets count of line 3."
|
|
::= { alMPLine3 15 }
|
|
|
|
alMPLine4 OBJECT IDENTIFIER ::= { alMP 11 }
|
|
|
|
alMPLOSS4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),not(0),yes(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LOSS on line 4."
|
|
::= { alMPLine4 1 }
|
|
|
|
alMPILOSS4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Ignore LOSS on line 4."
|
|
::= { alMPLine4 2 }
|
|
|
|
alMPLink4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),down(0),up(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Link status line 4."
|
|
::= { alMPLine4 3 }
|
|
|
|
alMPSpeed4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),e10Mbps(0),e100Mbps(1),e1000Mbps(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Speed of line 4."
|
|
::= { alMPLine4 4 }
|
|
|
|
alMPType4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),halfduplex(0),fullduplex(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Communication type of line 4."
|
|
::= { alMPLine4 5 }
|
|
|
|
alMPFlow4 OBJECT-TYPE
|
|
SYNTAX INTEGER { offline(-1),off(0),on(1) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Flow control of line 4."
|
|
::= { alMPLine4 6 }
|
|
|
|
alMPPktRX4 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Received packets count of line 4."
|
|
::= { alMPLine4 7 }
|
|
|
|
alMPByteRX4 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Received bytes count of line 4."
|
|
::= { alMPLine4 8 }
|
|
|
|
alMPPktTX4 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitted packets count of line 4."
|
|
::= { alMPLine4 9 }
|
|
|
|
alMPByteTX4 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmitted bytes count of line 4."
|
|
::= { alMPLine4 10 }
|
|
|
|
alMPError4 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Error count of line 4."
|
|
::= { alMPLine4 11 }
|
|
|
|
alMPCollision4 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Collision count of line 4."
|
|
::= { alMPLine4 12 }
|
|
|
|
alMPPauseIn4 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Input Pause count of line 4."
|
|
::= { alMPLine4 13 }
|
|
|
|
alMPPauseOut4 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Output Pause count of line 4."
|
|
::= { alMPLine4 14 }
|
|
|
|
alMPDiscardsIn4 OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Input Discards pactets count of line 4."
|
|
::= { alMPLine4 15 }
|
|
|
|
END
|