876 lines
32 KiB
Plaintext
876 lines
32 KiB
Plaintext
-- ============================================================================
|
|
-- AT-QOS.MIB, Allied Telesis enterprise MIB: Quality Of Service module
|
|
--
|
|
-- Copied from ATR-QOS.MIB of pre 2.9.1 release
|
|
--
|
|
-- Copyright (c) 2006 by Allied Telesis, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- ============================================================================
|
|
|
|
AT-QOS-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Counter32,
|
|
Counter64,
|
|
Integer32,
|
|
Gauge32
|
|
FROM SNMPv2-SMI
|
|
|
|
DisplayString
|
|
FROM SNMPv2-TC
|
|
|
|
modules
|
|
FROM AT-SMI-MIB
|
|
;
|
|
|
|
qos MODULE-IDENTITY
|
|
LAST-UPDATED "200412011525Z"
|
|
ORGANIZATION "Allied Telesis, Inc"
|
|
CONTACT-INFO
|
|
"http://www.alliedtelesis.com"
|
|
DESCRIPTION
|
|
"This MIB file contains definitions of managed objects for the
|
|
handling QoS on Allied Telesis switches. There are a
|
|
number of tables designed to be generic to
|
|
all ATR switches supporting QoS in silicon, and well as tables for
|
|
specific AT switches or switch familes."
|
|
|
|
REVISION "200412011525Z"
|
|
DESCRIPTION
|
|
"Initial Revision"
|
|
|
|
::= { modules 99 }
|
|
|
|
-- ============================================================================
|
|
-- ============================================================================
|
|
-- QoS Switch group
|
|
-- ============================================================================
|
|
-- ============================================================================
|
|
|
|
qosSwitch OBJECT IDENTIFIER ::= { qos 1 }
|
|
|
|
-- =================================================
|
|
-- QoS Switch Port table
|
|
-- =================================================
|
|
|
|
qosSwitchPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosSwitchPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Generic port configuration for QoS, indexed by port index."
|
|
::= { qosSwitch 1 }
|
|
|
|
qosSwitchPortEntry OBJECT-TYPE
|
|
SYNTAX QosSwitchPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single switch port entry for QoS."
|
|
INDEX { qosSwitchPortIndex }
|
|
::= { qosSwitchPortTable 1 }
|
|
|
|
QosSwitchPortEntry ::=
|
|
SEQUENCE {
|
|
qosSwitchPortIndex
|
|
Integer32,
|
|
qosSwitchPortPolicyIndex
|
|
Integer32
|
|
}
|
|
|
|
qosSwitchPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port index of the port entry. This index is the same port number
|
|
used in CLI commands, and the same index as appears in other MIB
|
|
tables related to switch ports."
|
|
::= { qosSwitchPortEntry 1 }
|
|
|
|
qosSwitchPortPolicyIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Policy index of the policy for this port. Policy index numbers for
|
|
CLI commands start at 0, while SNMP indexes must start at 1. This
|
|
means that the policy index in this MIB variable is 1 more than the
|
|
index for the same policy as entered for CLI commands."
|
|
::= { qosSwitchPortEntry 2 }
|
|
|
|
-- ============================================================================
|
|
-- Policy table
|
|
-- ============================================================================
|
|
|
|
qosSwitchPolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosSwitchPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QoS policy configuration, indexed by policy index."
|
|
::= { qosSwitch 2 }
|
|
|
|
qosSwitchPolicyEntry OBJECT-TYPE
|
|
SYNTAX QosSwitchPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A policy entry containing configuration information for
|
|
a single policy."
|
|
INDEX { qosSwitchPolicyIndex }
|
|
::= { qosSwitchPolicyTable 1 }
|
|
|
|
QosSwitchPolicyEntry ::=
|
|
SEQUENCE {
|
|
qosSwitchPolicyIndex
|
|
Integer32,
|
|
qosSwitchPolicyDescription
|
|
OCTET STRING,
|
|
qosSwitchPolicyDefaultTCDropBWClass3
|
|
INTEGER,
|
|
qosSwitchPolicyDefaultTCIgnoreBWClass
|
|
INTEGER,
|
|
qosSwitchPolicyDefaultTCMarkValue
|
|
Integer32,
|
|
qosSwitchPolicyDefaultTCMaxBandwidth
|
|
Integer32,
|
|
qosSwitchPolicyDefaultTCMaxBurstSize
|
|
Integer32,
|
|
qosSwitchPolicyDefaultTCMinBandwidth
|
|
Integer32,
|
|
qosSwitchPolicyDefaultTCMinBurstSize
|
|
Integer32,
|
|
qosSwitchPolicyDefaultTCPremarking
|
|
INTEGER,
|
|
qosSwitchPolicyDefaultTCRemarking
|
|
INTEGER
|
|
}
|
|
|
|
qosSwitchPolicyIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..256)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this policy entry. Policy index numbers for
|
|
CLI commands start at 0, while SNMP indexes must start at 1. This
|
|
means that the policy index in this MIB variable is 1 more than the
|
|
index for the same policy as entered for CLI commands."
|
|
::= { qosSwitchPolicyEntry 1 }
|
|
|
|
qosSwitchPolicyDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An optional description for the policy, as entered via the CLI."
|
|
::= { qosSwitchPolicyEntry 2 }
|
|
|
|
qosSwitchPolicyDefaultTCDropBWClass3 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether traffic that exceeds the bandwidth for the
|
|
default traffic class be dropped or not. The bandwidth limit is the
|
|
combined total of the variables qosSwitchPolicyDefaultTCMaxBandwidth
|
|
and qosSwitchPolicyDefaultTCMaxBurstSize. A value of yes(1) indicates
|
|
that traffic exceeding the bandwidth limit is dropped immediately. A
|
|
value of no(0) indicates that the excess traffic is marked as
|
|
bandwidth class 3 and is therefore eligible for dropping by the RED
|
|
curve settings."
|
|
::= { qosSwitchPolicyEntry 3 }
|
|
|
|
qosSwitchPolicyDefaultTCIgnoreBWClass OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the traffic metering stage acknowledges any
|
|
bandwidth class assigned to flows processed by the default traffic
|
|
class. If set to yes(1), previously assigned bandwidth classes will
|
|
be ignored will be ignored and the bandwidth class of the traffic
|
|
will be set according to the meter conformance level of the flow."
|
|
::= { qosSwitchPolicyEntry 4 }
|
|
|
|
qosSwitchPolicyDefaultTCMarkValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0..63 | 256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the qosSwitchPolicyDefaultTCPremarking variable is set to
|
|
usemarkvalue(1), this variable specifies the index into the DSCP
|
|
MAP table to use for remarking. A value in the range 0 to 63
|
|
indicates the DSCP to use, the value 256 indicates that no DSCP
|
|
value has been defined for the default traffic class for this policy."
|
|
::= { qosSwitchPolicyEntry 5 }
|
|
|
|
qosSwitchPolicyDefaultTCMaxBandwidth OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16000000 | 2147483647)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum bandwidth available to the default traffic
|
|
class. Traffic under this bandwidth will be designated as bandwidth
|
|
class 2. The value 2147483647 indicates that there is no limit on
|
|
the maximum bandwidth for the default traffic class for this
|
|
policy."
|
|
::= { qosSwitchPolicyEntry 6 }
|
|
|
|
qosSwitchPolicyDefaultTCMaxBurstSize OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16000000)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum bandwidth above the bandwidth specified by
|
|
qosSwitchPolicyDefaultTCMaxBandwidth before traffic is marked as
|
|
bandwidth class 3."
|
|
::= { qosSwitchPolicyEntry 7 }
|
|
|
|
qosSwitchPolicyDefaultTCMinBandwidth OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16000000 | 2147483647)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the minimum bandwidth reserved for the default traffic
|
|
class. Traffic under this bandwidth will be marked as bandwidth
|
|
class 1. The value 2147483647 indicates that there is no limit on
|
|
the minimum bandwidth for the default traffic class for this
|
|
policy."
|
|
::= { qosSwitchPolicyEntry 8 }
|
|
|
|
qosSwitchPolicyDefaultTCMinBurstSize OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16000000)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum amount of data above the bandwidth specified
|
|
in the variable qosSwitchPolicyDefaultTCMinBandwidth before traffic
|
|
is marked as bandwidth class 2."
|
|
::= { qosSwitchPolicyEntry 9 }
|
|
|
|
qosSwitchPolicyDefaultTCPremarking OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
usemarkvalue(1),
|
|
usedscp(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the QoS action to take on traffic in the default traffic
|
|
class before metering actions are taken. If none(0) is specified,
|
|
the traffic is passed to the metering stage. If usemarkvalue(1) is
|
|
specified, the QoS settings are taken from the variable
|
|
qosSwitchPolicyDefaultTCMarkValue used as an index into the DCSP
|
|
MAP table. If usedscp(2) is specified, the DSCP value in the data
|
|
frames is used as an index into the DSCP MAP table."
|
|
::= { qosSwitchPolicyEntry 10 }
|
|
|
|
qosSwitchPolicyDefaultTCRemarking OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
usedscpmap(1),
|
|
bwclass(2),
|
|
priority(3),
|
|
bwclass_priority(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the action to take after the metering stage for traffic
|
|
in the default traffic class. The metering stage assigns a
|
|
temporary value of bandwidth class to the flow which is used to
|
|
determine its per-hop behaviour. If this variable is set to
|
|
bwclass(2) or bwclass_priority(4), the temporary bandwidth class
|
|
becomes the new bandwidth class for the flow. If priority(3) or
|
|
bwclass_priority(4) is specified, the currently
|
|
assigned queue for frames in this traffic class is used in
|
|
conjunction with the temporary bandwidth class to determine the new
|
|
value of the VLAN Tag User Priority field. If usedscpmap(1) is
|
|
specified, the temporary value is used (in conjunction with the
|
|
DSCP of the frame) as an index into the DSCP MAP table, which then
|
|
assigns the actual, new values for bandwidth class, DSCP, Egress
|
|
Queue and VLAN Tag User Priority. A value of none(0) for this
|
|
variable means that no remarking of the packet is done after the
|
|
metering stage."
|
|
::= { qosSwitchPolicyEntry 11 }
|
|
|
|
-- ============================================================================
|
|
-- Traffic Class table
|
|
-- ============================================================================
|
|
|
|
qosSwitchTrafficClassTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosSwitchTrafficClassEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Traffic class configuration, indexed by traffic class index."
|
|
::= { qosSwitch 3 }
|
|
|
|
qosSwitchTrafficClassEntry OBJECT-TYPE
|
|
SYNTAX QosSwitchTrafficClassEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A traffic class entry containing configuration information for
|
|
a single traffic class."
|
|
INDEX { qosSwitchTrafficClassIndex }
|
|
::= { qosSwitchTrafficClassTable 1 }
|
|
|
|
QosSwitchTrafficClassEntry ::=
|
|
SEQUENCE {
|
|
qosSwitchTrafficClassIndex
|
|
Integer32,
|
|
qosSwitchTrafficClassPolicyNumber
|
|
Integer32,
|
|
qosSwitchTrafficClassDescription
|
|
OCTET STRING,
|
|
qosSwitchTrafficClassDropBWClass3
|
|
INTEGER,
|
|
qosSwitchTrafficClassIgnoreBWClass
|
|
INTEGER,
|
|
qosSwitchTrafficClassMarkValue
|
|
Integer32,
|
|
qosSwitchTrafficClassMaxBandwidth
|
|
Integer32,
|
|
qosSwitchTrafficClassMaxBurstSize
|
|
Integer32,
|
|
qosSwitchTrafficClassMinBandwidth
|
|
Integer32,
|
|
qosSwitchTrafficClassMinBurstSize
|
|
Integer32,
|
|
qosSwitchTrafficClassPremarking
|
|
INTEGER,
|
|
qosSwitchTrafficClassRemarking
|
|
INTEGER
|
|
}
|
|
|
|
qosSwitchTrafficClassIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1024)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this traffic class entry. Traffic class index numbers
|
|
for CLI commands start at 0, while SNMP indexes must start at 1.
|
|
This means that the traffic class index in this MIB variable is 1
|
|
more than the index for the same traffic class as entered for CLI
|
|
commands."
|
|
::= { qosSwitchTrafficClassEntry 1 }
|
|
|
|
qosSwitchTrafficClassPolicyNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (0..256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Policy index of the policy to which this traffic class belongs.
|
|
Policy index numbers for CLI commands start at 0, while SNMP
|
|
indexes must start at 1. This means that the policy index in this
|
|
MIB variable is 1 more than the index for the same policy as
|
|
entered for CLI commands. A value of 0 for this variable means
|
|
that the traffic class has not been added to a policy yet."
|
|
::= { qosSwitchTrafficClassEntry 2 }
|
|
|
|
qosSwitchTrafficClassDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An optional description for this traffic class."
|
|
::= { qosSwitchTrafficClassEntry 3 }
|
|
|
|
qosSwitchTrafficClassDropBWClass3 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether traffic that exceeds the bandwidth for
|
|
this traffic class be dropped or not. The bandwidth limit is the
|
|
combined total of the variables qosSwitchTrafficClassMaxBandwidth
|
|
and qosSwitchTrafficClassMaxBurstSize A value of yes(1) indicates
|
|
that traffic exceeding the bandwidth limit is dropped immediately. A
|
|
value of no(0) indicates that the excess traffic is marked as
|
|
bandwidth class 3 and is therefore eligible for dropping by the RED
|
|
curve settings."
|
|
::= { qosSwitchTrafficClassEntry 4 }
|
|
|
|
qosSwitchTrafficClassIgnoreBWClass OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(0),
|
|
yes(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the traffic metering stage acknowledges any
|
|
bandwidth class assigned to flows processed by this traffic
|
|
class. If set to yes(1), previously assigned bandwidth classes will
|
|
be ignored will be ignored and the bandwidth class of the traffic
|
|
will be set according to the meter conformance level of the flow."
|
|
::= { qosSwitchTrafficClassEntry 5 }
|
|
|
|
qosSwitchTrafficClassMarkValue OBJECT-TYPE
|
|
SYNTAX Integer32 (0..63 | 256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the qosSwitchTrafficClassPremarking variable is set to
|
|
usemarkvalue(1), this variable specifies the index into the DSCP
|
|
MAP table to use for remarking. A value in the range 0 to 63
|
|
indicates the DSCP to use, the value 256 indicates that no DSCP
|
|
value has been defined for this traffic class."
|
|
::= { qosSwitchTrafficClassEntry 6 }
|
|
|
|
qosSwitchTrafficClassMaxBandwidth OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16000000 | 2147483647)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum bandwidth available to this traffic
|
|
class. Traffic under this bandwidth will be designated as bandwidth
|
|
class 2. The value 2147483647 indicates that there is no limit on
|
|
the maximum bandwidth for this traffic class."
|
|
::= { qosSwitchTrafficClassEntry 7 }
|
|
|
|
qosSwitchTrafficClassMaxBurstSize OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16000000)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum bandwidth above the bandwidth specified by
|
|
qosSwitchTrafficClassMaxBandwidth before traffic is marked as
|
|
bandwidth class 3."
|
|
::= { qosSwitchTrafficClassEntry 8 }
|
|
|
|
qosSwitchTrafficClassMinBandwidth OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16000000 | 2147483647)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the minimum bandwidth reserved for this traffic
|
|
class. Traffic under this bandwidth will be marked as bandwidth
|
|
class 1. The value 2147483647 indicates that there is no limit on
|
|
the minimum bandwidth for this traffic class."
|
|
::= { qosSwitchTrafficClassEntry 9 }
|
|
|
|
qosSwitchTrafficClassMinBurstSize OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16000000)
|
|
UNITS "kbps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the maximum amount of data above the bandwidth specified
|
|
in the variable qosSwitchTrafficClassMinBandwidth before traffic
|
|
is marked as bandwidth class 2."
|
|
::= { qosSwitchTrafficClassEntry 10 }
|
|
|
|
qosSwitchTrafficClassPremarking OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
usemarkvalue(1),
|
|
usedscp(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the QoS action to take on traffic in this traffic
|
|
class before metering actions are taken. If none(0) is specified,
|
|
the traffic is passed to the metering stage. If usemarkvalue(1) is
|
|
specified, the QoS settings are taken from the variable
|
|
qosSwitchTrafficClassMarkValue used as an index into the DCSP
|
|
MAP table. If usedscp(2) is specified, the DSCP value in the data
|
|
frames is used as an index into the DSCP MAP table."
|
|
::= { qosSwitchTrafficClassEntry 11 }
|
|
|
|
qosSwitchTrafficClassRemarking OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
usedscpmap(1),
|
|
bwclass(2),
|
|
priority(3),
|
|
bwclass_priority(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the action to take after the metering stage for traffic
|
|
in this traffic class. The metering stage assigns a
|
|
temporary value of bandwidth class to the flow which is used to
|
|
determine its per-hop behaviour. If this variable is set to
|
|
bwclass(2) or bwclass_priority(3), the temporary bandwidth class
|
|
becomes the new bandwidth class for the flow. If priority(3) or
|
|
bwclass_priority(4) is specified, the currently
|
|
assigned queue for frames in this traffic class is used in
|
|
conjunction with the temporary bandwidth class to determine the new
|
|
value of the VLAN Tag User Priority field. If usedscpmap(1) is
|
|
specified, the temporary value is used (in conjunction with the
|
|
DSCP of the frame) as an index into the DSCP MAP table, which then
|
|
assigns the actual, new values for bandwidth class, DSCP, Egress
|
|
Queue and VLAN Tag User Priority. A value of none(0) for this
|
|
variable means that no remarking of the packet is done after the
|
|
metering stage."
|
|
::= { qosSwitchTrafficClassEntry 12 }
|
|
|
|
-- ============================================================================
|
|
-- ============================================================================
|
|
-- 8948 specific stuff. The tables in this section are specific to the 8948
|
|
-- switch, because they relate directly to the hardware used in this switch.
|
|
-- Other switches that use the same hardware will also support this MIB table.
|
|
-- ============================================================================
|
|
-- ============================================================================
|
|
|
|
qosSwitch8948 OBJECT IDENTIFIER ::= { qosSwitch 4 }
|
|
|
|
-- ============================================================================
|
|
-- 8948 port table - 8948 specific extensions to the qosSwitchPortTable
|
|
-- ============================================================================
|
|
|
|
qosSwitch8948PortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosSwitch8948PortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port configuration, indexed by port index."
|
|
::= { qosSwitch8948 1 }
|
|
|
|
qosSwitch8948PortEntry OBJECT-TYPE
|
|
SYNTAX QosSwitch8948PortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single switch port entry."
|
|
AUGMENTS { qosSwitchPortEntry }
|
|
::= { qosSwitch8948PortTable 1 }
|
|
|
|
QosSwitch8948PortEntry ::=
|
|
SEQUENCE {
|
|
qosSwitch8948PortDefaultTCCountersAggregateBytes
|
|
Counter64,
|
|
qosSwitch8948PortDefaultTCCountersBwConformanceClass1Bytes
|
|
Counter64,
|
|
qosSwitch8948PortDefaultTCCountersBwConformanceClass2Bytes
|
|
Counter64,
|
|
qosSwitch8948PortDefaultTCCountersBwConformanceClass3Bytes
|
|
Counter64,
|
|
qosSwitch8948PortDefaultTCCountersDroppedBytes
|
|
Counter64,
|
|
qosSwitch8948PortQueueLength
|
|
Gauge32,
|
|
qosSwitch8948PortQueue0Length
|
|
Gauge32,
|
|
qosSwitch8948PortQueue1Length
|
|
Gauge32,
|
|
qosSwitch8948PortQueue2Length
|
|
Gauge32,
|
|
qosSwitch8948PortQueue3Length
|
|
Gauge32,
|
|
qosSwitch8948PortQueue4Length
|
|
Gauge32,
|
|
qosSwitch8948PortQueue5Length
|
|
Gauge32,
|
|
qosSwitch8948PortQueue6Length
|
|
Gauge32,
|
|
qosSwitch8948PortQueue7Length
|
|
Gauge32
|
|
}
|
|
|
|
qosSwitch8948PortDefaultTCCountersAggregateBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of bytes classified by the default traffic class
|
|
on this port."
|
|
::= { qosSwitch8948PortEntry 1 }
|
|
|
|
qosSwitch8948PortDefaultTCCountersBwConformanceClass1Bytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes classified by the default traffic class on
|
|
this port conforming to bandwidth class 1."
|
|
::= { qosSwitch8948PortEntry 2 }
|
|
|
|
qosSwitch8948PortDefaultTCCountersBwConformanceClass2Bytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes classified by the default traffic class on
|
|
this port conforming to bandwidth class 2."
|
|
::= { qosSwitch8948PortEntry 3 }
|
|
|
|
qosSwitch8948PortDefaultTCCountersBwConformanceClass3Bytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes classified by the default traffic class on
|
|
this port conforming to bandwidth class 3."
|
|
::= { qosSwitch8948PortEntry 4 }
|
|
|
|
qosSwitch8948PortDefaultTCCountersDroppedBytes OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes dropped by the default traffic class on
|
|
this port."
|
|
::= { qosSwitch8948PortEntry 5 }
|
|
|
|
qosSwitch8948PortQueueLength OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets currently queued for transmission on
|
|
this port."
|
|
::= { qosSwitch8948PortEntry 6 }
|
|
|
|
qosSwitch8948PortQueue0Length OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets currently queued for transmission on this
|
|
port in queue 0.
|
|
The numbering of queues indicates the priority of handling the
|
|
traffic in that queue, with the higher queue number getting
|
|
higher priority. The priority values in packets are mapped to
|
|
queues via a priority to queue mapping. The default priority to
|
|
queue mapping is as follows:
|
|
Priority Queue
|
|
value number
|
|
7 7
|
|
6 6
|
|
5 5
|
|
4 4
|
|
3 3
|
|
2 1
|
|
1 0
|
|
0 2
|
|
This mapping allows the default priority value of 0 to map to a
|
|
queue which is not the lowest priority queue, allowing traffic
|
|
classes to be assigned a lower priority queue than the default."
|
|
::= { qosSwitch8948PortEntry 7 }
|
|
|
|
qosSwitch8948PortQueue1Length OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets currently queued for transmission on this
|
|
port in queue 1. See the description for qosSwitch8948PortQueue0Length
|
|
to understand the meaning of queue numbers."
|
|
::= { qosSwitch8948PortEntry 8 }
|
|
|
|
qosSwitch8948PortQueue2Length OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets currently queued for transmission on this
|
|
port in queue 2. See the description for qosSwitch8948PortQueue0Length
|
|
to understand the meaning of queue numbers."
|
|
::= { qosSwitch8948PortEntry 9 }
|
|
|
|
qosSwitch8948PortQueue3Length OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets currently queued for transmission on this
|
|
port in queue 3. See the description for qosSwitch8948PortQueue0Length
|
|
to understand the meaning of queue numbers."
|
|
::= { qosSwitch8948PortEntry 10 }
|
|
|
|
qosSwitch8948PortQueue4Length OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets currently queued for transmission on this
|
|
port in queue 4. See the description for qosSwitch8948PortQueue0Length
|
|
to understand the meaning of queue numbers."
|
|
::= { qosSwitch8948PortEntry 11 }
|
|
|
|
qosSwitch8948PortQueue5Length OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets currently queued for transmission on this
|
|
port in queue 5. See the description for qosSwitch8948PortQueue0Length
|
|
to understand the meaning of queue numbers."
|
|
::= { qosSwitch8948PortEntry 12 }
|
|
|
|
qosSwitch8948PortQueue6Length OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets currently queued for transmission on this
|
|
port in queue 6. See the description for qosSwitch8948PortQueue0Length
|
|
to understand the meaning of queue numbers."
|
|
::= { qosSwitch8948PortEntry 13 }
|
|
|
|
qosSwitch8948PortQueue7Length OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packets currently queued for transmission on this
|
|
port in queue 7. See the description for qosSwitch8948PortQueue0Length
|
|
to understand the meaning of queue numbers."
|
|
::= { qosSwitch8948PortEntry 14 }
|
|
|
|
-- ============================================================================
|
|
-- Traffic Class counters table
|
|
-- ============================================================================
|
|
|
|
qosSwitch8948TrafficClassCountersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosSwitch8948TrafficClassCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Traffic class counters indexed by port, policy and traffic
|
|
class."
|
|
::= { qosSwitch8948 2 }
|
|
|
|
qosSwitch8948TrafficClassCountersEntry OBJECT-TYPE
|
|
SYNTAX QosSwitch8948TrafficClassCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A traffic class counters entry containing QOS counters for a
|
|
particular port, policy and traffic class."
|
|
INDEX { qosSwitch8948TCCountersPortIndex,
|
|
qosSwitch8948TCCountersPolicyIndex,
|
|
qosSwitch8948TCCountersTrafficClassIndex }
|
|
::= { qosSwitch8948TrafficClassCountersTable 1 }
|
|
|
|
QosSwitch8948TrafficClassCountersEntry ::=
|
|
SEQUENCE {
|
|
qosSwitch8948TCCountersPortIndex
|
|
Integer32,
|
|
qosSwitch8948TCCountersPolicyIndex
|
|
Integer32,
|
|
qosSwitch8948TCCountersTrafficClassIndex
|
|
Integer32,
|
|
qosSwitch8948TCCountersAggregateBytes
|
|
Counter32,
|
|
qosSwitch8948TCCountersBwConformanceClass1Bytes
|
|
Counter32,
|
|
qosSwitch8948TCCountersBwConformanceClass2Bytes
|
|
Counter32,
|
|
qosSwitch8948TCCountersBwConformanceClass3Bytes
|
|
Counter32,
|
|
qosSwitch8948TCCountersDroppedBytes
|
|
Counter32
|
|
}
|
|
|
|
qosSwitch8948TCCountersPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the port for this entry in the traffic class
|
|
counter table. This index is the same as the port index in the
|
|
port table and is the same as the port number of the port in
|
|
user commands."
|
|
::= { qosSwitch8948TrafficClassCountersEntry 1 }
|
|
|
|
qosSwitch8948TCCountersPolicyIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..256)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the policy for this entry in the traffic class
|
|
counter table. Each port can only have one policy assigned at a
|
|
time. Policy index numbers for CLI commands start at 0, while SNMP
|
|
indexes must start at 1. This means that the policy index in this
|
|
MIB variable is 1 more than the index for the same policy as
|
|
entered for CLI commands."
|
|
::= { qosSwitch8948TrafficClassCountersEntry 2 }
|
|
|
|
qosSwitch8948TCCountersTrafficClassIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1024)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the traffic class for this entry in the traffic
|
|
class counter table. The index is one of the indices defined for
|
|
traffic classes for this port and policy. Traffic class indices
|
|
for CLI commands start at 0, while SNMP indices must start at 1.
|
|
This means that the traffic class index in this MIB variable is 1
|
|
more than the index for the same traffic class as entered for CLI
|
|
commands."
|
|
::= { qosSwitch8948TrafficClassCountersEntry 3 }
|
|
|
|
qosSwitch8948TCCountersAggregateBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of bytes classified by this traffic class for
|
|
this policy on this port."
|
|
::= { qosSwitch8948TrafficClassCountersEntry 4 }
|
|
|
|
qosSwitch8948TCCountersBwConformanceClass1Bytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes classified by this traffic class for this
|
|
policy on this port conforming to bandwidth class 1."
|
|
::= { qosSwitch8948TrafficClassCountersEntry 5 }
|
|
|
|
qosSwitch8948TCCountersBwConformanceClass2Bytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes classified by this traffic class for this
|
|
policy on this port conforming to bandwidth class 2."
|
|
::= { qosSwitch8948TrafficClassCountersEntry 6 }
|
|
|
|
qosSwitch8948TCCountersBwConformanceClass3Bytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes classified by this traffic class for this
|
|
policy on this port conforming to bandwidth class 3."
|
|
::= { qosSwitch8948TrafficClassCountersEntry 7 }
|
|
|
|
qosSwitch8948TCCountersDroppedBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bytes dropped by this traffic class for this
|
|
policy on this port."
|
|
::= { qosSwitch8948TrafficClassCountersEntry 8 }
|
|
|
|
END
|